Activity
From 02/27/2018 to 03/28/2018
03/26/2018
- 04:17 AM Bug #5171 (Future Release): CM:When ECR form is published,then it is not displayed under the DocPro (Module/Specified Level) folder
- Expecting the Patch for the same
03/22/2018
- 01:02 PM Bug #2853 (Closed): When the routes are edited in document management, then the route is not followed when revising the document (only when revising the document without attaching the document and it goes via assign author)
- bhuvana verified in SP730 Cycle 8 and Closing this issue
- 01:00 PM Bug #5171 (Open): CM:When ECR form is published,then it is not displayed under the DocPro (Module/Specified Level) folder
- 10:43 AM Bug #5171 (Closed): CM:When ECR form is published,then it is not displayed under the DocPro (Module/Specified Level) folder
- When ECR form is published,then it is not displayed under the DocPro (Module/Specified Level) folder.(When Batch Proc...
- 09:33 AM Unit Level and Cosmetic Issues #4140 (Closed): In New Route page enter the Route name in Route Name field and click on Save button, Updated successfully is displayed, whereas Saved successfully should display
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:33 AM Unit Level and Cosmetic Issues #4140 (Resolved): In New Route page enter the Route name in Route Name field and click on Save button, Updated successfully is displayed, whereas Saved successfully should display
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:32 AM Bug #4013 (Closed): New document request→ sites are not displayed when the PPT1 site user is added in a new group(Only when the default rights are not changed) and also New document request sites are not displayed when the PPT1 site user has group access in PPT2 site
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:32 AM Bug #4016 (Closed): Access Rights:User override is not working,due to this site dropdown is not displayed in New document request
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:32 AM Bug #4948 (Closed): Advanced search:Clicking on Back link should shows the advanced search results rather its showing the particular level in TOC view
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:31 AM Bug #4017 (Closed): Multisite:When the PPT2 user has Site access rights for the PPT1 folder then PPT1 site is not displayed for the PPT2
- closing this thiis as Bbhuvana verified this issues in SP730
03/21/2018
- 06:52 PM Bug #4014 (Closed): Multilang(Chinese and spanish) : "Document rights" header label and * search column order is W.R.T table's column order label are not converted
- Closed in Cycle 8
03/20/2018
- 06:32 PM Bug #2335 (Closed): Aqua Output document name is displayed in Deliverable Info page before Aqua document is published
- This seems to be not an issue so closing this issue
- 06:30 PM Unit Level and Cosmetic Issues #4072 (Closed): Archive Project alert Plural form need to be changed:When there is no multiple project selection.
- this seems to be not an issue so closing this issue
- 06:25 PM Usability #4084 (Closed): When saving the Project data from silverlight page.(Print option) data looks clumsy.
- Need to discuss as this is related with pdf, But this issue needs to be addressed or else give a proper error message...
- 06:21 PM Usability #4083 (Closed): When clicking on show header in the deliverable list page, project details are displayed inconsistently.
- Since this page is converting to Jquery this will be getting addressed so closing this issue
03/19/2018
- 12:20 PM Bug #5027 (Closed): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- Verified all the attachments where ever revision is applicable working as expected.
- 11:56 AM Bug #5100 (Closed): Audit status route is not displaying while publishing audit report using the publish window.
- 10:03 AM Bug #4711 (Closed): Spanish Language: Import and Security Menu are displaying as "Message Id 31 not found?"
- Abu verified in SP730 cycle 8 and found working hence closing this issue
- 10:03 AM Bug #4710 (Closed): Spanish Language: Cant able to Open the Aqua Main Menu and its showing as "Conversion from String" Error Message
- Abu verified in SP730 cycle 8 and foud working hence closing this issue
03/17/2018
- 02:01 PM Bug #4697 (Closed): Form Sheets: In all the Inspection Forms, Right-Arrow is not working and not showing the Next Shift Form
- This Issue was Verified in Last Cycle and the Issue was Fixed so the QA Team is Closing this Issue.
03/16/2018
- 11:20 AM Bug #1628 (Closed): Burndown chart does not display the correct values on the graph
- Verified in Cycle 8 by ramya and closing this issue
- 10:10 AM Bug #1628 (Future Release): Burndown chart does not display the correct values on the graph
- 09:35 AM Bug #1628: Burndown chart does not display the correct values on the graph
- Moving this issue to SP750 as QA did not get any fix till cycle 8 - Delayed task count is mismatching ( Everything wa...
- 10:26 AM Bug #4712 (Closed): Chinese Language: All the Tabs, Menus are Loading as "??" Symbols
- 10:25 AM Bug #4712 (Future Release): Chinese Language: All the Tabs, Menus are Loading as "??" Symbols
- Since there is no fix from dev team till Cycle 8 moving this issue in to Future release
03/15/2018
- 05:45 PM Bug #5100 (Resolved): Audit status route is not displaying while publishing audit report using the publish window.
- 09:36 AM Bug #5100 (Open): Audit status route is not displaying while publishing audit report using the publish window.
- 01:55 PM Bug #4751 (Closed): Reports:when reason for request is formatted, then in reports its showing with HTML tag
- 10:38 AM Unit Level and Cosmetic Issues #4594 (Closed): Module: Click on Select Users-> Label missing in the header.
- Verified by ragavi on Sp730 and closing this issue
- 10:37 AM Unit Level and Cosmetic Issues #4594 (Resolved): Module: Click on Select Users-> Label missing in the header.
- Verified by ragavi on Sp730 and closing this issue
- 10:36 AM Bug #5052 (Closed): In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side but clicking on “<” button hangs the system and then the user not able to perform any operations.
- 10:36 AM Bug #5086 (Closed): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
03/14/2018
- 07:16 PM Bug #5027 (Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 03:02 PM Bug #5027 (Not Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 06:44 PM Bug #4003 (Closed): TBD:Purpose of keyword link in owned documents
- verified in SP730 and hence Closing the issue
- 06:17 PM Bug #4003: TBD:Purpose of keyword link in owned documents
- Keyword link is removed as discussed with sabu.Changed for seasons
- 06:44 PM Bug #3336 (Closed): Label change needed in Administrator Actions under Doc Pro(Only in some of the existing dbs)
- verified in SP730 and hence Closing the issue
- 06:43 PM Bug #2941 (Closed): Routes page after searched For the data which is not in the list should display as "No data Found".
- verified in SP730 and hence Closing the issue
- 06:43 PM Bug #2835 (Closed): Impact:Cant able to do a New document request when requesting the document without entering the keyword,reason for req fields
- verified in SP730 and hence Closing the issue
- 06:43 PM Bug #2761 (Closed): Primary Module administrator is changing automatically(cant able to replicate, but Occurs very Frequently when testing doc pro)
- verified in SP730 and hence Closing the issue
- 06:42 PM Bug #2714 (Closed): Reports->Related document list->It shows an alert "The revision parameter is missing a value " is displayed when clicked on View Report button and report is not displayed
- verified in SP730 and hence Closing the issue
- 06:42 PM Bug #2479 (Closed): Archive Management:When editing the document owner, no scroll bar to see the users,
- verified in SP730 and hence Closing the issue
- 06:42 PM Bug #2717 (Closed): Retained documents->When clicked on a deleted document, it throws a server error
- verified in SP730 and hence Closing the issue
- 06:14 PM Bug #4858 (Closed): Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- Issue got Closed in SP730 cycle 8.
All the five symbols related issues are closed - 06:00 PM Bug #4716 (Closed): Report : (Impact) project summary report: Project actual finish date is displayed when there is a deliverable which is not started and completed.
- closing this issue in SP730 cycle 8
1)In Risk column month name is displayed as Unknown
2)In the task status and ... - 05:58 PM Bug #3584 (Closed): Yazaki: In Audit Program -> Audit Type mapping. if audit type name is having special character in it, while adding online form and clicking on add shows option to upload Files instead it should show Available checklist in the application
- 01:16 PM Bug #3584: Yazaki: In Audit Program -> Audit Type mapping. if audit type name is having special character in it, while adding online form and clicking on add shows option to upload Files instead it should show Available checklist in the application
- Verified in SP730 C8 and closing this issue ( Rupa and Raja)
- 05:58 PM Bug #1628: Burndown chart does not display the correct values on the graph
- Issue not resolved in Cycle 8 SP730
- 05:50 PM Bug #1628 (Not Resolved): Burndown chart does not display the correct values on the graph
- Issue Not Resolved
- 12:55 PM Bug #1628 (Resolved): Burndown chart does not display the correct values on the graph
- 05:46 PM Bug #4880 (Closed): FSR: There is no option to change the color for the Non Standard ASIL Values in the Matrix Cell Values
- This issue is fixed in FSR but in IFM external element allocation is dispalyed in VOC.
- 05:39 PM Bug #2707 (Closed): Burn down chart does not display the correct values-Total Task is mismatched with the no of deliverable in the project
- Issue Closed in SP 730 cycle 8
- 11:47 AM Bug #2707 (Resolved): Burn down chart does not display the correct values-Total Task is mismatched with the no of deliverable in the project
- 05:25 PM Bug #4597 (Closed): In Some of the pages multi language labels are not converted in Chinese and Spanish.
- All the issues got fixed Except "11. Training series header shows some numbers in Spanish" Issue.
- 05:13 PM Bug #4583 (Closed): Problem in groups menu for reports when user preference is set to Chinese or Spanish.
- 05:08 PM Bug #4583 (Resolved): Problem in groups menu for reports when user preference is set to Chinese or Spanish.
- 05:13 PM Bug #4585 (Closed): Some of the emails are missing in customized email messages
- 05:08 PM Bug #4585 (Resolved): Some of the emails are missing in customized email messages
- 05:13 PM Bug #4589 (Closed): Lable issue in audit cycle page for the "FirstWeekOfYear "
- 05:08 PM Bug #4589 (Resolved): Lable issue in audit cycle page for the "FirstWeekOfYear "
- 05:13 PM Bug #4548 (Yet to Verify): Problem on the planned audit approval rejection alert message.
- 05:08 PM Bug #4548 (Resolved): Problem on the planned audit approval rejection alert message.
- 05:12 PM Bug #4547 (Closed): Publish window label conversion issue
- 05:08 PM Bug #4547 (Resolved): Publish window label conversion issue
- 05:01 PM Bug #4742 (Closed): Report : Project summary - Clicking on the risk icon not redirected to the risk register report.
- closing this issue in SP730 Cycle8
- 04:24 PM Bug #4715 (TBD): When a approver approves a document, all the links in the document and in the breadcrumb should be disabled. JS occurs when clicking on "Add Supplier" link. Occurs when PDF is disabled.
- Need to discuss as this is related with pdf, But this issue needs to be addressed or else give a proper error message...
- 04:21 PM Bug #4715 (In Progress): When a approver approves a document, all the links in the document and in the breadcrumb should be disabled. JS occurs when clicking on "Add Supplier" link. Occurs when PDF is disabled.
- 04:20 PM Bug #5068 (Known Issue): APQP: Published charter page charter template form facing issue
- Needs to be fix in SP750
- 04:18 PM Bug #2715 (Closed): Reports: Date format is not displayed as per the user and administrator preference date format
- Verified in SP730 and closing this issue
- 12:11 PM Bug #2715: Reports: Date format is not displayed as per the user and administrator preference date format
- Expecting the user preference date format will display in the Report as well
- 12:11 PM Bug #2715 (TBD): Reports: Date format is not displayed as per the user and administrator preference date format
- 12:11 PM Bug #2715 (In Progress): Reports: Date format is not displayed as per the user and administrator preference date format
- 04:01 PM Bug #4964 (Closed): Multilanguage- User Loggin - When changing the languages for a user, system is displaying alert in first selected language even after changing to other languages.
- Closed in SP730 Cycle 8
- 03:36 PM Bug #4916 (Closed): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- 03:30 PM Bug #4882 (Closed): Auditee response when clicked on the hyperlink displays 500 server error
- 03:28 PM Bug #4973 (Closed): IC Settings: Cant able to Save the Edited/Updated Settings for Chinese/Spanish Languages
- 03:28 PM Bug #22 (Closed): Corrective Action (multi language)
- 02:32 PM Bug #5100 (Closed): Audit status route is not displaying while publishing audit report using the publish window.
- Scenario: in audit status select the route as "approval route 1" and while publishing the audit report in publish win...
- 02:24 PM Bug #5023 (Closed): Audit report publish window displays the wrong route to which the audit report is publish
- 01:02 PM Bug #2662: Gage Visual Management Report:Clicking on the study link redirects to the study page but does not allows to perform study
- This issue will get closed only when the Calibration verification screen converted to MVC page.
- 12:57 PM Bug #1102 (Closed): Reports - In Risk reduction rate reports Average RPN value column displays Error ,when Occurrence value is not enter.
- Verified in SP730 and Closing this issue
- 12:56 PM Bug #4096 (Future Release): When importing the completed project,opening the project shows the Percentage completion as 100 for all the task.
- 12:56 PM Usability #4094 (Future Release): Refresh issue on customized email messages.
- 12:56 PM Unit Level and Cosmetic Issues #4091 (Future Release): Project groups cant be deleted at first creation other than default
- 12:56 PM Usability #4084 (Future Release): When saving the Project data from silverlight page.(Print option) data looks clumsy.
- 12:56 PM Usability #4083 (Future Release): When clicking on show header in the deliverable list page, project details are displayed inconsistently.
- 12:56 PM Unit Level and Cosmetic Issues #4078 (Future Release): In Archived projects,Site,goal,scope and deliverable details are displayed with Html tags.
- 12:56 PM Unit Level and Cosmetic Issues #4072 (Future Release): Archive Project alert Plural form need to be changed:When there is no multiple project selection.
- 12:56 PM Bug #4071 (Future Release): Action Page->Documents-Select the reqest ->click on Home button. No response
- 12:43 PM Bug #3596: Frequency field in the study should not be specified as optional field-Bias,External lab calibration,Gage RR Variable and Stability
- For Stability,Bias,Calibration,External lab calibration,Gage RR attribute issue got fixed.
Only for Gage RR variab... - 12:17 PM Bug #4085 (Future Release): GYR/Task Rating: After one publish of a plan document and seeing the task rating it is not updated as per the GYR task rating.
- This is an issue and needs to be addressed
- 09:47 AM Bug #5017 (Closed): In Bulk publish :Not able to pick level in docpro level Selection
03/13/2018
- 08:59 PM Bug #2479 (Future Release): Archive Management:When editing the document owner, no scroll bar to see the users,
- 07:31 PM Unit Level and Cosmetic Issues #4137 (Future Release): In New Document Request page Don’t select the Document Level and in the Document Number field enter the Document Number and click on Document Name field the pop up message "Please define site levels first." is displayed and select the Document Level again
- 07:31 PM Bug #2717 (Future Release): Retained documents->When clicked on a deleted document, it throws a server error
- 07:31 PM Bug #2714 (Future Release): Reports->Related document list->It shows an alert "The revision parameter is missing a value " is displayed when clicked on View Report button and report is not displayed
- 07:31 PM Usability #4158 (TBD): TBD:Click on View Document place the mouse cursor away from the document Zoom (In & Out) is not displayed, pointer arrow is displayed The Text "PLEASE AVOID USING KEYBOARD" is partially displayed
- 07:31 PM Usability #4154 (TBD): TBD:Click on View Document Zoom In the document around 150% and click on document 63% is displayed
- 07:30 PM Bug #4175 (Future Release): Edit Document:Review date should not accept the date lesser than the document published date.Document is coming in actions only when the review date is within a month
- 07:30 PM Bug #4144 (Future Release): In the Browse of the document it accepts the exe file, added successfully but in the document couldn’t able to see the uploaded exe file--Need to restict the non supported extensions
- 07:30 PM Usability #4115 (Future Release): Insert data field should be opened then and there in the pdf template creation
- 07:30 PM Bug #3636 (Future Release): TOC:Source level is displayed in the TOC when clicking back link from the integrated document(same in Advanced search)
- 07:30 PM Bug #3336 (Future Release): Label change needed in Administrator Actions under Doc Pro(Only in some of the existing dbs)
- 07:30 PM Bug #2853 (Future Release): When the routes are edited in document management, then the route is not followed when revising the document (only when revising the document without attaching the document and it goes via assign author)
- 07:30 PM Bug #2835 (Future Release): Impact:Cant able to do a New document request when requesting the document without entering the keyword,reason for req fields
- 07:30 PM Bug #2763 (Future Release): Document is not going for approval process as expected(When requester and approver are same)
- 07:30 PM Bug #2761 (Future Release): Primary Module administrator is changing automatically(cant able to replicate, but Occurs very Frequently when testing doc pro)
- 07:30 PM Bug #4103 (TBD): TBD:When admin bypassing the first round of approvers then terminate button should be disabled for the requester
- 05:42 PM Bug #5013 (Closed): Problem on holiday list for Auditee response due date/Auditee revised due date.
- 05:22 PM Bug #5017 (Resolved): In Bulk publish :Not able to pick level in docpro level Selection
- 05:01 PM Bug #2715 (WAD): Reports: Date format is not displayed as per the user and administrator preference date format
- 04:59 PM Bug #2715: Reports: Date format is not displayed as per the user and administrator preference date format
- Currently we have implemented only in DocPro & AuditPro - Pandora's request. The current format can globally be under...
- 04:34 PM Bug #4844 (Closed): Aqua Security: Aqua Security is not working
- 02:31 PM Bug #4844 (Resolved): Aqua Security: Aqua Security is not working
03/12/2018
- 04:36 PM Bug #4880 (Resolved): FSR: There is no option to change the color for the Non Standard ASIL Values in the Matrix Cell Values
- 02:50 PM Bug #4921 (Closed): CM: ECR form - Risk and opportunity sheet.
- 1)When the Risk value is gets changed because of updating the severity and occurrence it shows alert as priority scor...
- 02:45 PM Bug #4921: CM: ECR form - Risk and opportunity sheet.
- browser rendering is slow to process the formula request
- 01:07 PM Bug #4921: CM: ECR form - Risk and opportunity sheet.
- 1)User pop up window displaced incorrectly on selection of "who" in the risk form.-Issue closed
2)When the Risk valu... - 02:28 PM Bug #4742 (Reopen): Report : Project summary - Clicking on the risk icon not redirected to the risk register report.
- Reopen in Cycle7
- 02:21 PM Bug #5053 (Closed): Project summary report - Report does not display any data. Only data related to RISK are displayed
- Issue Got closed in SP 730 cycle 7
- 02:20 PM Bug #5053 (Resolved): Project summary report - Report does not display any data. Only data related to RISK are displayed
- 12:57 PM Bug #4858: Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- < symbol fixed,> symbol fixed,& symbol fixed
above three symbols are fixed but ' and " not fixed all reports - 12:36 PM Bug #4716 (Not Resolved): Report : (Impact) project summary report: Project actual finish date is displayed when there is a deliverable which is not started and completed.
- Project summary report: Project actual start date and finish date column displayed empty- Reported issue got closed.
... - 12:30 PM Bug #5086: In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- KPI changes are working earlier
- 12:04 PM Bug #5086 (Resolved): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- Fix ready for next build
- 10:32 AM Bug #5086 (Future Release): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- This seems to be a new functionality added and QA missed out in the earlier cycle as well. Di sussed with sabu and mo...
- 10:31 AM Bug #5086 (TBD): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- 10:12 AM Bug #5086 (Closed): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able t...
- 12:22 PM Bug #5081 (Closed): Copy process or design segment which have existing data and paste the existing data Global PI process segment open it shows blank
- Closing this issue as its seems to be data related issue and could not able to reproduce in Cycle2
- 11:30 AM Bug #5081: Copy process or design segment which have existing data and paste the existing data Global PI process segment open it shows blank
- This issue occurs in EwQIMS_Inst1 and not able to replicate in EwQIMS_Inst 2.
- 12:05 PM Bug #5052 (Resolved): In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side but clicking on “<” button hangs the system and then the user not able to perform any operations.
- Patch ready for next build
- 11:25 AM Bug #5027 (Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 11:23 AM Bug #5013 (Resolved): Problem on holiday list for Auditee response due date/Auditee revised due date.
- 09:38 AM Usability #5026 (Closed): CM: ECR form-When clicking on the hyperlink provided in the project specific attachment it is displayed in the small window and maximizing the window does not displays the full screen.
- Verified by rem-ya and closing this issue
- 09:12 AM Bug #2710: Tracking Matrix:Clicking on View Report displays "Report processing error"
- SSRS limitation
03/09/2018
- 06:44 PM Usability #4411 (Closed): Select users (Grid pages) - Select the Topic checkbox on select user window and click refresh button. Here system removes the topic checkbox for one click and then the listing elements for another click.
- Closed in SP730 Cycle 7
- 06:41 PM Bug #4964 (Yet to Verify): Multilanguage- User Loggin - When changing the languages for a user, system is displaying alert in first selected language even after changing to other languages.
- Language is not converted yet.
- 06:40 PM Bug #5069 (Closed): Assign Department - Unable to assign department contact person. Page is loading for long time.
- Closed in SP730 Cycle 7
- 11:54 AM Bug #5069 (Resolved): Assign Department - Unable to assign department contact person. Page is loading for long time.
- 10:01 AM Bug #5069 (Open): Assign Department - Unable to assign department contact person. Page is loading for long time.
- 06:38 PM Bug #5070 (Closed): EFC Tree - Test instance Status colour is not displayed in EFC Tree
- Closed in SP730 Cycle 7.
- 12:14 PM Bug #5070 (Resolved): EFC Tree - Test instance Status colour is not displayed in EFC Tree
- 10:02 AM Bug #5070 (Open): EFC Tree - Test instance Status colour is not displayed in EFC Tree
- 06:38 PM Bug #4903 (Closed): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- Closed in SP730 Cycle 7
- 06:34 PM Bug #5054 (Closed): Admin can’t be able to add users in a route, the added users are not displayed and its functioning like module auto approval. Due to this cant able to verify publishing the documents with approval process.
- closed in cycle 7
- 06:17 PM Unit Level and Cosmetic Issues #4895 (Closed): IFM: In Function and Requirement pop up window, don't select Function/Requirement row click on Ctrl+Delete button alert pop up is displayed, click on enter alert pop up window is not getting closed
- Issue Closed.
- 05:58 PM Usability #4912 (Closed): Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- Issue Fixed and closed
- 05:47 PM Bug #4697 (Not Resolved): Form Sheets: In all the Inspection Forms, Right-Arrow is not working and not showing the Next Shift Form
- 05:47 PM Bug #4705 (Closed): Social Media with Themes: For the Orange Color Theme, User Menu Account was interfere in Dashboard Control Panel
- 05:46 PM Bug #4706 (Closed): Social Media with Themes: For the Orange Color Theme, All the Menus are listing with Underlines
- 05:39 PM Bug #4490: APQP: Draft status column displayed empty
- Reopening this issue in cycle 7 (3/9/2018).This seems to be behavioral issue.
For some times draft status is display... - 05:22 PM Bug #4724 (Closed): Control point displays no name in Sppc Ts sheet
- 05:21 PM Bug #5005 (Closed): Unexpected Popup message While Copy and Paste the Production items Which is created Either from RFD or FST
- 05:21 PM Bug #5065 (Closed): Replace is not working in Tables shows error
- 05:21 PM Bug #5064 (Closed): Find and replace is not working shows error
- 05:02 PM Bug #4837 (Closed): Themes: For Orange Theme, Receiving Inspection Menu is not working
- 04:56 PM Bug #5081 (Closed): Copy process or design segment which have existing data and paste the existing data Global PI process segment open it shows blank
- Copy process or design segment which have existing data and paste the existing data Global PI process segment open i...
- 04:55 PM Bug #4916 (Yet to Verify): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- Because of Language Pack not installed
- 12:05 PM Bug #4916 (Resolved): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- 04:55 PM Bug #4973 (Yet to Verify): IC Settings: Cant able to Save the Edited/Updated Settings for Chinese/Spanish Languages
- Because of Language Pack not installed
- 04:51 PM Bug #5002 (Closed): Inspection Entry/Receiving Inspection: Cant able to continue the Final/Receiving Inspection
- 04:51 PM Bug #5014 (Closed): Part Equipment Mapping Menu: Cant able to Delete the Equipment Linkages(This Issue was coming for Multi Languages also)
- 04:50 PM Bug #4998 (Closed): Customize Email Messages: Out of Control Products was Duplicated as 3 and showing the same Rejection Mail Content in all the 3 Grids
- 04:30 PM Bug #5021 (Closed): Meetings -> KPI Snapshot Function is not working
- 04:18 PM Bug #4831 (Closed): In Competency evaluation menu, Shows unwanted tool tips near attach button and in Competency search page, near view shows empty tool tip.
- 10:23 AM Bug #4831 (Resolved): In Competency evaluation menu, Shows unwanted tool tips near attach button and in Competency search page, near view shows empty tool tip.
- 03:41 PM Bug #4918 (Closed): In Malfunction, in new row copy n paste the row of 1st malfunction then that ID is getting changed of 1st Mal row
- issue Closed
- 03:41 PM Bug #5035 (Closed): In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default internal element will be in checked, just uncheck and check the internal Element check box. Internal and External Element are getting checked
- Issue Closed
- 03:40 PM Bug #4880 (Not Resolved): FSR: There is no option to change the color for the Non Standard ASIL Values in the Matrix Cell Values
- The Reported Issue is fixed but there is an impact issue. In TSR the Fore ground color is not getting changed.
- 03:18 PM Unit Level and Cosmetic Issues #5020 (Closed): Meetings-> Dashboard-> Done button is not working
- 02:48 PM Unit Level and Cosmetic Issues #5022 (Closed): Proposal Rating -> Wrong alert message displayed when try to save without mandatory fields
- 02:24 PM Bug #4291 (Closed): Policy Attachments -> Attach From DocPro -> The latest revised document is not displayed
- Closed on 03-09-2018
03/08/2018
- 01:40 PM Bug #4431 (Closed): TBD:Position Based Route: When position has no User then it is displaying 0 in pending request
- Closing this issue in Cycle 7
When there are no users in the position, then in routes it wont display the position... - 01:08 PM Bug #4697 (Resolved): Form Sheets: In all the Inspection Forms, Right-Arrow is not working and not showing the Next Shift Form
- 12:59 PM Bug #5070 (Closed): EFC Tree - Test instance Status colour is not displayed in EFC Tree
- EFC Tree - Test instance Status colour is not displayed in EFC Tree
- 12:34 PM Bug #3773 (Closed): User list page- Search or refresh the page, column alignment is mismatching
- Closed in SP730 Cycle 7
- 12:33 PM Bug #5024 (Closed): Module Admin:Cant able to set the user as Primary Module Admin
- Closed in SP730 Cycle 7
- 12:27 PM Bug #4965 (Closed): User creation - Language Preferences in user creation page displays random data in the list.
- Closed in SP730 Cycle 7
- 12:14 PM Bug #4637 (Closed): Attachments that are attached anywhere from HR Pro is not getting displayed in Doc Pro levels.
- 11:57 AM Bug #5069 (Closed): Assign Department - Unable to assign department contact person. Page is loading for long time.
- Assign Department - Unable to assign department contact person. Page is loading for long time.
- 11:30 AM Bug #5058 (Closed): CM: ECR form - Part name is displayed as requested date.
- Issue got closed in SP730 cycle 7(New Site)
- 10:31 AM Bug #5058 (Resolved): CM: ECR form - Part name is displayed as requested date.
- 10:01 AM Bug #5058 (Open): CM: ECR form - Part name is displayed as requested date.
- 10:01 AM Bug #5068 (Open): APQP: Published charter page charter template form facing issue
- 09:50 AM Bug #5068 (Closed): APQP: Published charter page charter template form facing issue
- 1)Published charter page displays the some data fields with black highlighted color.
2)Published charter template fo... - 10:00 AM Bug #5053 (Open): Project summary report - Report does not display any data. Only data related to RISK are displayed
- 09:59 AM Bug #5064 (Open): Find and replace is not working shows error
- 09:59 AM Bug #5065 (Open): Replace is not working in Tables shows error
- 12:10 AM Usability #4840 (Closed): (Impact) : 8D form usability issues
03/07/2018
- 09:50 PM Bug #5065 (Closed): Replace is not working in Tables shows error
- Replace is not working in Tables shows error
Line: 3966 Error: 'DlgReplace' is undefined - 09:47 PM Bug #4831 (Not Resolved): In Competency evaluation menu, Shows unwanted tool tips near attach button and in Competency search page, near view shows empty tool tip.
- 09:27 PM Bug #5064 (Closed): Find and replace is not working shows error
- Find and replace is not working shows error
---------------------------
Message from webpage
-------------------... - 04:52 PM Bug #5018 (Closed): Tree diagrams - Collapsing the context arrow on header element is not collapsing test instance status alone
- Closed in SP730 Cycle 7
- 04:47 PM Bug #4904 (Closed): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- (Current Functionality)- Right click on tree diagram and scroll. System allows to scroll but cannot able to click any...
- 03:29 PM Bug #5058 (Closed): CM: ECR form - Part name is displayed as requested date.
- CM: ECR form - Part name is displayed as requested date.
- 03:19 PM Bug #4858 (Not Resolved): Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- < > is not handled in risk register and resource tracking and & is not handled in resource allocation report. ' " is ...
- 03:16 PM Bug #4492 (Future Release): Grid Issues - Grid is not unique throughout the modules. Following modules faces the same issue(Refer Description)
- 03:16 PM Bug #4492 (TBD): Grid Issues - Grid is not unique throughout the modules. Following modules faces the same issue(Refer Description)
- Need to handle in each modules As per Anilkumar on the cycle 6 - Moving to Sp750 Anilkumar
- 02:57 PM Bug #3196 (Closed): When forms are interchaged entered data does not gets saved
- 02:39 PM Bug #4105 (Closed): DVP&R - Date format is accepted as 01/01/2018. Does not accept 1/1/2018. system displays a grey colour status icon on VOC
- Closed in SP730 cycle 7
- 01:16 PM Bug #5054 (Open): Admin can’t be able to add users in a route, the added users are not displayed and its functioning like module auto approval. Due to this cant able to verify publishing the documents with approval process.
- 12:51 PM Bug #5054 (Closed): Admin can’t be able to add users in a route, the added users are not displayed and its functioning like module auto approval. Due to this cant able to verify publishing the documents with approval process.
- Admin can’t be able to add users in a route, the added users are not displayed and its functioning like module auto a...
- 12:50 PM Bug #5053 (Closed): Project summary report - Report does not display any data. Only data related to RISK are displayed
- 12:49 PM Bug #5052 (Open): In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side but clicking on “<” button hangs the system and then the user not able to perform any operations.
- QA Missed in the last cycles
- 12:03 PM Bug #5052 (Closed): In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side but clicking on “<” button hangs the system and then the user not able to perform any operations.
- In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side...
- 12:49 PM Bug #4751 (Yet to Verify): Reports:when reason for request is formatted, then in reports its showing with HTML tag
- 12:49 PM Bug #4431 (Yet to Verify): TBD:Position Based Route: When position has no User then it is displaying 0 in pending request
- 12:28 PM Bug #5025 (Closed): New changes : Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later (Refer screenshot)
- Closed in cycle 7 07-03-2018
- 12:25 PM Usability #4883 (Closed): SIte dropdown should shows the site based on the module site selection (Same in All screens across doc pro)
- Closed in Cycle 7
- 12:19 PM Bug #4291 (Resolved): Policy Attachments -> Attach From DocPro -> The latest revised document is not displayed
- Change in VMDPAttachPublish.js.
- 12:13 PM Bug #5013 (Not Resolved): Problem on holiday list for Auditee response due date/Auditee revised due date.
- 12:10 PM Bug #5001: New document request:Error occurs when clicking on Select Level button(only when there are no active levels in site, only for first time)
- Please select a site first message should come, but now its showing Select site
- 12:09 PM Bug #5001 (Closed): New document request:Error occurs when clicking on Select Level button(only when there are no active levels in site, only for first time)
- Closed in CYcle 7
- 11:42 AM Bug #5027 (Not Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 11:36 AM Bug #4724: Control point displays no name in Sppc Ts sheet
- I have verified this issue its working
- 11:32 AM Bug #3584 (Reopen): Yazaki: In Audit Program -> Audit Type mapping. if audit type name is having special character in it, while adding online form and clicking on add shows option to upload Files instead it should show Available checklist in the application
- 11:29 AM Usability #5008 (Closed): APQP : Routes page(Risk Setup) Please refer below description.
- 11:29 AM Usability #5008: APQP : Routes page(Risk Setup) Please refer below description.
- Issue got closed in SP730 CYCLE7.
- 10:50 AM Bug #4973 (Resolved): IC Settings: Cant able to Save the Edited/Updated Settings for Chinese/Spanish Languages
- 10:50 AM Bug #5011 (Future Release): Equipments: Cant able to Create the Equipments like Assembly, Machines and also the Equipment Types field was missing for the Existing Equipments for the both Languages
- Since the equipment page is going to change in TPM in the next build, this issue will handle along with TPM changes.
- 10:46 AM Bug #4998 (Resolved): Customize Email Messages: Out of Control Products was Duplicated as 3 and showing the same Rejection Mail Content in all the 3 Grids
- 10:45 AM Bug #5014 (Resolved): Part Equipment Mapping Menu: Cant able to Delete the Equipment Linkages(This Issue was coming for Multi Languages also)
- 09:50 AM Bug #4811 (Closed): CM: ECR form : Risk Form- Clicking on Responsibility person in the Risk form (View risk)User pop dialog displaced incorrectly
- Issue got closed in SP730 CYCLE7
03/06/2018
- 07:57 PM Bug #4858 (Resolved): Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- 05:21 PM Bug #4858 (In Progress): Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- 07:57 PM Bug #4716 (Resolved): Report : (Impact) project summary report: Project actual finish date is displayed when there is a deliverable which is not started and completed.
- 06:29 PM Usability #5008 (Resolved): APQP : Routes page(Risk Setup) Please refer below description.
- 05:36 PM Bug #4751 (Resolved): Reports:when reason for request is formatted, then in reports its showing with HTML tag
- 04:24 PM Bug #4751: Reports:when reason for request is formatted, then in reports its showing with HTML tag
- Will get back to make sure that thi can be fixed or not
- 05:18 PM Bug #4759 (Closed): Report: Burndown chart does not display the correct values on the graph for remaining and Actual task completed.
- wORKING AS EXPECTED AS PER THE DISCUSSION WITH sABU AND dEV TEAM ON 06/03/2018
- 04:49 PM Bug #4913 (Closed): Form Sheet: In all the Forms, the Saved Value is not display
- 04:38 PM Bug #3905 (Closed): CM: Allows to Initiate Change request for a project by the person who is not a member of that project.
- Closing this issue as per the Discussion on 06032018 with sabu and dev team
- 04:25 PM Bug #4291: Policy Attachments -> Attach From DocPro -> The latest revised document is not displayed
- get back when can be fixed
- 04:16 PM Bug #4637 (Resolved): Attachments that are attached anywhere from HR Pro is not getting displayed in Doc Pro levels.
- 04:15 PM Unit Level and Cosmetic Issues #3906: Problem solver setup → Problem classification : Sub category data should be displayed as dropdown menu
- this is the expected Functionality
- 04:15 PM Unit Level and Cosmetic Issues #3906 (Closed): Problem solver setup → Problem classification : Sub category data should be displayed as dropdown menu
- Closing this issue per the discussion on 06/03/2018 with Sabu and dev team
- 04:15 PM Unit Level and Cosmetic Issues #3906 (Resolved): Problem solver setup → Problem classification : Sub category data should be displayed as dropdown menu
- 04:15 PM Bug #4811 (Resolved): CM: ECR form : Risk Form- Clicking on Responsibility person in the Risk form (View risk)User pop dialog displaced incorrectly
- 02:52 PM Bug #4431 (Resolved): TBD:Position Based Route: When position has no User then it is displaying 0 in pending request
- 02:51 PM Usability #4883 (Resolved): SIte dropdown should shows the site based on the module site selection (Same in All screens across doc pro)
- 02:50 PM Bug #5001 (Resolved): New document request:Error occurs when clicking on Select Level button(only when there are no active levels in site, only for first time)
- 11:49 AM Bug #5002 (Resolved): Inspection Entry/Receiving Inspection: Cant able to continue the Final/Receiving Inspection
- 11:40 AM Bug #4873 (Closed): Social Media: In the My Dashboard for Worst Supplier Reports its showing wrongly
- 11:19 AM Bug #3196 (Resolved): When forms are interchaged entered data does not gets saved
- 11:19 AM Usability #4840 (Resolved): (Impact) : 8D form usability issues
- Comment 2 fixed by Radha Krishnan
- 11:18 AM Usability #4840 (In Progress): (Impact) : 8D form usability issues
- 10:54 AM Unit Level and Cosmetic Issues #5020 (Resolved): Meetings-> Dashboard-> Done button is not working
- Change in Index.cshtml file in Boss/view/dashboard.
- 10:52 AM Bug #5021 (Resolved): Meetings -> KPI Snapshot Function is not working
- Change in Newmeet.js and editmeet.js.
- 10:50 AM Unit Level and Cosmetic Issues #5022 (Resolved): Proposal Rating -> Wrong alert message displayed when try to save without mandatory fields
- Change in ProposalRating.js file.
- 09:28 AM Bug #5035 (Resolved): In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default internal element will be in checked, just uncheck and check the internal Element check box. Internal and External Element are getting checked
- 09:27 AM Bug #5035 (Open): In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default internal element will be in checked, just uncheck and check the internal Element check box. Internal and External Element are getting checked
03/05/2018
- 09:19 PM Bug #4904 (Resolved): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- 10:54 AM Bug #4904 (Not Resolved): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- 08:46 PM Bug #5018 (Resolved): Tree diagrams - Collapsing the context arrow on header element is not collapsing test instance status alone
- 10:17 AM Bug #5018 (Open): Tree diagrams - Collapsing the context arrow on header element is not collapsing test instance status alone
- 08:46 PM Bug #4105 (Resolved): DVP&R - Date format is accepted as 01/01/2018. Does not accept 1/1/2018. system displays a grey colour status icon on VOC
- 08:45 PM Bug #4903 (Resolved): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- 01:24 PM Bug #4903 (In Progress): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- 12:56 PM Bug #4903 (Not Resolved): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- 12:56 PM Bug #4903: EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- Clicking on context arrow displays a error message.
- 07:17 PM Bug #5035 (Closed): In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default internal element will be in checked, just uncheck and check the internal Element check box. Internal and External Element are getting checked
- In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default int...
- 06:39 PM Bug #4750: Reports:In all the reports date is shown as 2018 Feb 9.Before its showing as 9 Feb 2018
- After running the job, its working as per admin settings
- 01:00 PM Bug #4750 (Closed): Reports:In all the reports date is shown as 2018 Feb 9.Before its showing as 9 Feb 2018
- Whatever be the user preference date format, it should display the date format as dd-MMM-YYYY in reports
Closed in... - 06:25 PM Bug #5024 (Resolved): Module Admin:Cant able to set the user as Primary Module Admin
- 10:06 AM Bug #5024 (Open): Module Admin:Cant able to set the user as Primary Module Admin
- 06:24 PM Bug #3773 (Resolved): User list page- Search or refresh the page, column alignment is mismatching
- 06:24 PM Usability #4411 (Resolved): Select users (Grid pages) - Select the Topic checkbox on select user window and click refresh button. Here system removes the topic checkbox for one click and then the listing elements for another click.
- 06:13 PM Bug #4716 (In Progress): Report : (Impact) project summary report: Project actual finish date is displayed when there is a deliverable which is not started and completed.
- Moving to Inprogress as per the dev meeting as on Mar 032018
- 06:05 PM Bug #4751 (In Progress): Reports:when reason for request is formatted, then in reports its showing with HTML tag
- Moving to Inpprogress after the Dev meeting on March 05 2018
- 05:44 PM Unit Level and Cosmetic Issues #4696 (Closed): Reports ( Refer description)
- Closing this issue after the dev meeting on 05-feb-2018
- 05:39 PM Bug #4759: Report: Burndown chart does not display the correct values on the graph for remaining and Actual task completed.
- As Kochu statment confusing again reopen this issue
- 05:38 PM Bug #4759 (Reopen): Report: Burndown chart does not display the correct values on the graph for remaining and Actual task completed.
- 05:37 PM Bug #4759 (Closed): Report: Burndown chart does not display the correct values on the graph for remaining and Actual task completed.
- This seems to be an understanding issue and as per the discussion with Sabu on 05-feb-2018 this seems to be ok and h...
- 05:26 PM Bug #4863 (Closed): Publish for Approval - When publish by auto approval, system is displaying PDF document. But when publishing using approver, HTML document is displayed
- As per the discussion on 05 feb 2018( dev meeting) this issue is closing now as this is the expected behaviour.
- 05:12 PM Bug #4837 (Resolved): Themes: For Orange Theme, Receiving Inspection Menu is not working
- 05:11 PM Bug #4705 (Resolved): Social Media with Themes: For the Orange Color Theme, User Menu Account was interfere in Dashboard Control Panel
- 05:11 PM Bug #4706 (Resolved): Social Media with Themes: For the Orange Color Theme, All the Menus are listing with Underlines
- 04:09 PM Bug #4431 (In Progress): TBD:Position Based Route: When position has no User then it is displaying 0 in pending request
- 03:26 PM Bug #4831 (Resolved): In Competency evaluation menu, Shows unwanted tool tips near attach button and in Competency search page, near view shows empty tool tip.
- 03:20 PM Bug #5025 (Resolved): New changes : Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later (Refer screenshot)
- 03:19 PM Bug #5025 (In Progress): New changes : Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later (Refer screenshot)
- 10:15 AM Bug #5025 (Open): New changes : Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later (Refer screenshot)
- 03:15 PM Bug #4518 (Closed): Same Priority is duplicated when Copying priority to other Sub Category
- 12:58 PM Bug #4518 (Resolved): Same Priority is duplicated when Copying priority to other Sub Category
- Actual issue was resolved with some usability problem in GUI.
- 01:26 PM Bug #4197 (Closed): BOM - While creating a PI from BOM, PI creation window is not closing once the PI is created. So I can able to create same PI for multiple times
- 01:12 PM Usability #4912 (Resolved): Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- 01:10 PM Unit Level and Cosmetic Issues #4895 (Resolved): IFM: In Function and Requirement pop up window, don't select Function/Requirement row click on Ctrl+Delete button alert pop up is displayed, click on enter alert pop up window is not getting closed
- 1. Discussed with Biju, cannot be done in current release so need to move to Future Release
2. File missed to update... - 01:01 PM Bug #5013 (Resolved): Problem on holiday list for Auditee response due date/Auditee revised due date.
- 01:01 PM Bug #5027 (Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 10:11 AM Bug #5027 (Open): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 01:01 PM Bug #5023 (Resolved): Audit report publish window displays the wrong route to which the audit report is publish
- 01:01 PM Bug #5023 (In Progress): Audit report publish window displays the wrong route to which the audit report is publish
- 10:11 AM Bug #5023 (Open): Audit report publish window displays the wrong route to which the audit report is publish
- 12:17 PM Bug #4965 (Resolved): User creation - Language Preferences in user creation page displays random data in the list.
- 11:51 AM Bug #4713 (Closed): Report: Tracking matrix - start date and finish date column displayed with one additional numeric values.
- 11:09 AM Bug #4713 (Not Resolved): Report: Tracking matrix - start date and finish date column displayed with one additional numeric values.
- 11:50 AM Unit Level and Cosmetic Issues #4859 (Closed): Resource tracking - Task vs. Resource graph - Project desc label to be changed to Project name.
- 11:10 AM Unit Level and Cosmetic Issues #4859 (Not Resolved): Resource tracking - Task vs. Resource graph - Project desc label to be changed to Project name.
- 11:48 AM Unit Level and Cosmetic Issues #4860 (Closed): Reports - resource allocation - " project vs. no of unallocated tasks" to be changed "project vs. no of allocated tasks", since the graph is depicting the no. of allocated tasks for the resource.
- Closing this issue SP730 Cycle 6
- 11:14 AM Unit Level and Cosmetic Issues #4860 (Not Resolved): Reports - resource allocation - " project vs. no of unallocated tasks" to be changed "project vs. no of allocated tasks", since the graph is depicting the no. of allocated tasks for the resource.
- 11:26 AM Bug #4954 (Closed): (Sporadic) : Not able to view Concern details in Actions → Initiate Problem Solving displayed as "Sorry, an error occurred while processing your request"
- 11:23 AM Bug #2339 (Closed): Theme is inconsistent in Revision History Summary - Draft Details & Draft Comments page
- As per the discussion made with QA manager closing this issue in SP730 cycle 6
- 11:03 AM Unit Level and Cosmetic Issues #5022 (Open): Proposal Rating -> Wrong alert message displayed when try to save without mandatory fields
- 11:03 AM Bug #5021 (Open): Meetings -> KPI Snapshot Function is not working
- 11:03 AM Unit Level and Cosmetic Issues #5020 (Open): Meetings-> Dashboard-> Done button is not working
- 11:01 AM Bug #4838 (Closed): Report : Project summary - Clicking on the risk icon redirected to the risk register report does not display the risk details of the project.
- 10:14 AM Bug #5014 (Open): Part Equipment Mapping Menu: Cant able to Delete the Equipment Linkages(This Issue was coming for Multi Languages also)
- 10:02 AM Bug #5017 (Open): In Bulk publish :Not able to pick level in docpro level Selection
- 10:01 AM Usability #5026 (Open): CM: ECR form-When clicking on the hyperlink provided in the project specific attachment it is displayed in the small window and maximizing the window does not displays the full screen.
03/04/2018
- 05:41 PM Unit Level and Cosmetic Issues #3906: Problem solver setup → Problem classification : Sub category data should be displayed as dropdown menu
- Assigning to Sabari. Grid Related Issue.
03/03/2018
- 04:53 PM Bug #4838 (Yet to Verify): Report : Project summary - Clicking on the risk icon redirected to the risk register report does not display the risk details of the project.
- 04:53 PM Bug #4713 (Yet to Verify): Report: Tracking matrix - start date and finish date column displayed with one additional numeric values.
- 04:53 PM Unit Level and Cosmetic Issues #4859 (Yet to Verify): Resource tracking - Task vs. Resource graph - Project desc label to be changed to Project name.
- 04:53 PM Unit Level and Cosmetic Issues #4860 (Yet to Verify): Reports - resource allocation - " project vs. no of unallocated tasks" to be changed "project vs. no of allocated tasks", since the graph is depicting the no. of allocated tasks for the resource.
- 04:48 PM Bug #5027 (Closed): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- Displays Error as "The linked document with this revision is not found" when Audit attachments are attached -
*Aud... - 04:04 PM Usability #5026 (Closed): CM: ECR form-When clicking on the hyperlink provided in the project specific attachment it is displayed in the small window and maximizing the window does not displays the full screen.
- CM: ECR form-When clicking on the hyperlink provided in the project specific attachment it is displayed in the small ...
- 04:03 PM Usability #4912: Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- Partially Fixed,
The Issue which are not fixed are mentioned below.
1.Item Definition-Function and Requirement... - 03:45 PM Usability #4898 (Closed): HARA: Alignment issue In Operational Situation under Exposure pop up window. Please refer screenshot
- Issue Closed on 03-03-2018
- 02:33 PM Bug #5025 (Closed): New changes : Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later (Refer screenshot)
- Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later ...
- 01:50 PM Bug #5024 (Closed): Module Admin:Cant able to set the user as Primary Module Admin
- Module Admin:Cant able to set the user as Primary Module Admin
- 01:02 PM Bug #5023 (Closed): Audit report publish window displays the wrong route to which the audit report is publish
- Audit report publish window displays the wrong route to which the audit report is publish.
Scenario: in audit stat... - 12:52 AM Unit Level and Cosmetic Issues #5022 (Closed): Proposal Rating -> Wrong alert message displayed when try to save without mandatory fields
- Proposal Rating -> Wrong alert message displayed as "Please enter proposal Rating" when try to save without Proposal...
- 12:21 AM Bug #5021 (Closed): Meetings -> KPI Snapshot Function is not working
- Meetings -> KPI Snapshot window is not visible to the user
The user could freeze report but could not view the repor... - 12:12 AM Unit Level and Cosmetic Issues #5020 (Closed): Meetings-> Dashboard-> Done button is not working
- Meetings-> Dashboard-> Done button is not working . Saved Successfully message is not displayed
03/02/2018
- 11:54 PM Bug #4899 (Closed): Modules and Site Administrators - Dropdown list is hiding within the Grid after assigning a module and Site rights to the users.
- Closed in cycle 6
- 11:50 PM Bug #4964: Multilanguage- User Loggin - When changing the languages for a user, system is displaying alert in first selected language even after changing to other languages.
- Cannot verify.. ? mark displayed when changing the language.
- 11:37 AM Bug #4964 (Resolved): Multilanguage- User Loggin - When changing the languages for a user, system is displaying alert in first selected language even after changing to other languages.
- 11:47 PM Bug #4966 (Closed): Release notes - Corrections in Release notes - Refer screen shot
- Closed in SP730 cycle 6
- 11:45 PM Bug #4969 (Closed): Multilanguage- preferences -Preferences - Create a user in chinese/Spanish language. Login as craeted user. Here system hides the suite from the default module dropdown in Preferences page.
- Closed in SP730 cycle 6
- 03:24 PM Bug #4969 (Resolved): Multilanguage- preferences -Preferences - Create a user in chinese/Spanish language. Login as craeted user. Here system hides the suite from the default module dropdown in Preferences page.
- 02:58 PM Bug #4969 (Open): Multilanguage- preferences -Preferences - Create a user in chinese/Spanish language. Login as craeted user. Here system hides the suite from the default module dropdown in Preferences page.
- 11:34 PM Bug #4105 (Reopen): DVP&R - Date format is accepted as 01/01/2018. Does not accept 1/1/2018. system displays a grey colour status icon on VOC
- Status Colour is not displayed in VOC.
- 11:19 PM Bug #5018 (Closed): Tree diagrams - Collapsing the context arrow on header element is not collapsing test instance status alone
- Tree diagrams - Collapsing the context arrow on header element is not collapsing test instance status alone
Also t... - 11:06 PM Bug #4904 (Yet to Verify): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- 11:05 PM Bug #4863 (Not Resolved): Publish for Approval - When publish by auto approval, system is displaying PDF document. But when publishing using approver, HTML document is displayed
- Publish for Approval - When publish by auto approval, system is displaying PDF document. But when publishing with app...
- 11:00 PM Bug #4901 (Closed): Failure Tree - Collapsing the context arrow on header element is not collapsing failure alone.
- Closed in SP730 cycle 6
- 10:59 PM Bug #4866 (Closed): Failure Tree - Failure tree displays blank space when adding more elements in the same level
- Closed in SP730 cycle 6
- 07:35 PM Bug #4900 (Closed): Requirement Tree - Clicking on Context arrow on the first function and requirement table repeatedly is increasing the space between other tables
- Closed in SP730 Cycle 6
- 07:14 PM Bug #4910 (Closed): EFC Tree - After adding the Test instance status in DVP&R, System is displaying Error
- Closed in SP730 cycle 6
- 05:21 PM Bug #5017 (Closed): In Bulk publish :Not able to pick level in docpro level Selection
- In Bulk publish :Not able to pick level in docpro level Selection
- 05:18 PM Bug #4983 (Closed): CM: When session get expires it shows as "Error" instead of "Session expired".
- Closing this issue.
when Session gets expired then alert is displayed as Update data not saved.
When clicking on pu... - 05:07 PM Bug #4913 (Not Resolved): Form Sheet: In all the Forms, the Saved Value is not display
- 05:06 PM Bug #4894 (Closed): Inspection Sheet: Created Rejection Plan is not deleting by Clearing the Rejected Sample Size and again Creating the Reaction Plan it will duplicate the 1st Reaction Plan
- This Issue was Verified in Cycle-6 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:48 PM Bug #4894 (Not Resolved): Inspection Sheet: Created Rejection Plan is not deleting by Clearing the Rejected Sample Size and again Creating the Reaction Plan it will duplicate the 1st Reaction Plan
- 05:04 PM Bug #4832 (Closed): Rejection Mail: The Sender Name and the GMT Time was incorrect
- This Issue was Verified in Cycle-6 and the Issue was Fixed so the QA Team is Closing this Issue.
- 04:58 PM Bug #4884 (Closed): CM: ECR Risk Form - Risk form details entered in Boss module are displayed in ECR form risk details.
- Not able to replicate the issue scenario.
So closing this issue in CYCLE 6 SP730. - 04:41 PM Usability #4912 (Not Resolved): Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- Above issue not resolved please address this issue also "From Item Definition Menu to TSR Menu, Select any of the Hea...
- 10:54 AM Usability #4912 (Resolved): Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- 04:40 PM Bug #4828 (Closed): Inspection Sheet Menu: Unwanted Alert Message displaying for the Rejection Sample
- 12:11 PM Bug #4828 (Reopen): Inspection Sheet Menu: Unwanted Alert Message displaying for the Rejection Sample
- 04:39 PM Bug #4833 (Closed): Inspection Sheet Menu: Reaction Plan is not Creating for the Rejected Sample
- 12:11 PM Bug #4833 (Reopen): Inspection Sheet Menu: Reaction Plan is not Creating for the Rejected Sample
- 04:38 PM Usability #4898 (Not Resolved): HARA: Alignment issue In Operational Situation under Exposure pop up window. Please refer screenshot
- Please Refer Screenshot
- 10:54 AM Usability #4898 (Resolved): HARA: Alignment issue In Operational Situation under Exposure pop up window. Please refer screenshot
- 04:14 PM Bug #4882 (Yet to Verify): Auditee response when clicked on the hyperlink displays 500 server error
- 04:10 PM Bug #22 (Yet to Verify): Corrective Action (multi language)
- Need Multi language to test this issue
- 03:55 PM Bug #5014 (Closed): Part Equipment Mapping Menu: Cant able to Delete the Equipment Linkages(This Issue was coming for Multi Languages also)
- In the Part Equipment Mapping Menu, Cant able to Delete the Linkages for the Newly Created or Existing Equipment Link...
- 03:41 PM Bug #5013 (Open): Problem on holiday list for Auditee response due date/Auditee revised due date.
- 03:40 PM Bug #5013: Problem on holiday list for Auditee response due date/Auditee revised due date.
- We can Close this issue, But happy to see that we have tested that scenario as well
- 03:38 PM Bug #5013: Problem on holiday list for Auditee response due date/Auditee revised due date.
- Seems to be not an issue as there is not a possible issue not to occur,
- 03:34 PM Bug #5013 (Closed): Problem on holiday list for Auditee response due date/Auditee revised due date.
- Holiday list is calculating wrong when date of submitting the audit report is set as holiday in suite. When auditor i...
- 03:34 PM Bug #5011 (Open): Equipments: Cant able to Create the Equipments like Assembly, Machines and also the Equipment Types field was missing for the Existing Equipments for the both Languages
- 03:29 PM Bug #5011 (Closed): Equipments: Cant able to Create the Equipments like Assembly, Machines and also the Equipment Types field was missing for the Existing Equipments for the both Languages
- In the Equipments Menu, We Cant able to Create the Equipments like Assembly, Machines and also the Equipment Types fi...
- 03:34 PM Usability #5008 (Open): APQP : Routes page(Risk Setup) Please refer below description.
- 03:10 PM Usability #5008 (Closed): APQP : Routes page(Risk Setup) Please refer below description.
- 1)When clicking on assign route, Position based route is displayed.
2)In the new route page white-space and horizont... - 03:25 PM Bug #4872 (Closed): Multisite (impact) : corporate concern form when edited & saved in other sites displayed as form name exists
- 10:48 AM Bug #4872 (Resolved): Multisite (impact) : corporate concern form when edited & saved in other sites displayed as form name exists
- 03:23 PM Bug #5005 (Open): Unexpected Popup message While Copy and Paste the Production items Which is created Either from RFD or FST
- 03:00 PM Bug #5005 (Closed): Unexpected Popup message While Copy and Paste the Production items Which is created Either from RFD or FST
- Unexpected Popup message While Copy and Paste the Production items Which is created Either from RFD or FST
-------... - 03:15 PM Usability #4421 (Closed): Suggestion : Provide log for Deleted concern details/list
- for now log in provided in backend ,UI will be provided in future release closing this issue
- 10:53 AM Usability #4421: Suggestion : Provide log for Deleted concern details/list
- For now it doesn't have a UI. Rather it is being captured in Table. Can able to view the details by running the follo...
- 10:50 AM Usability #4421 (Resolved): Suggestion : Provide log for Deleted concern details/list
- 10:50 AM Usability #4421 (In Progress): Suggestion : Provide log for Deleted concern details/list
- 03:09 PM Bug #4923 (Closed): Uploaded audit record doesnot displaye the forms to perform audit
- 02:57 PM Bug #4973 (Open): IC Settings: Cant able to Save the Edited/Updated Settings for Chinese/Spanish Languages
- 02:57 PM Bug #5002 (Open): Inspection Entry/Receiving Inspection: Cant able to continue the Final/Receiving Inspection
- 02:36 PM Bug #5002 (Closed): Inspection Entry/Receiving Inspection: Cant able to continue the Final/Receiving Inspection
- In the Inspection Entry and Receiving Inspection Menus, by Clicking on the Submit Button after entering the Values in...
- 02:56 PM Bug #4998 (Open): Customize Email Messages: Out of Control Products was Duplicated as 3 and showing the same Rejection Mail Content in all the 3 Grids
- 02:09 PM Bug #4998 (Closed): Customize Email Messages: Out of Control Products was Duplicated as 3 and showing the same Rejection Mail Content in all the 3 Grids
- In the Customize Email Messages Menu, Viewing the Out of Controls its showing as 3 and it contains the same Content o...
- 02:55 PM Bug #4919 (Closed): Two Safety Goal decompose ASIL Value is D go to Hara and Delete the Safety Goal. Change the S and C and assigning the Same Safety Goal. Now the FSR Document shows the previosuly assigned asil value
Issue closed on 02-03-2018- 10:55 AM Bug #4919 (Resolved): Two Safety Goal decompose ASIL Value is D go to Hara and Delete the Safety Goal. Change the S and C and assigning the Same Safety Goal. Now the FSR Document shows the previosuly assigned asil value
- 02:52 PM Bug #5001 (Open): New document request:Error occurs when clicking on Select Level button(only when there are no active levels in site, only for first time)
- 02:34 PM Bug #5001 (Closed): New document request:Error occurs when clicking on Select Level button(only when there are no active levels in site, only for first time)
- New document request:Error occurs when clicking on Select Level button(only when there are no active levels in site, ...
- 02:49 PM Bug #4916 (Not Resolved): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- 02:46 PM Bug #4917 (Closed): Impact Analysis: Saved one image using Greenshot tool and didn't changed any file name. Upload that image and click submit button. Now image is uploaded click on that image link, server error is displayed
Issue closed on 02-03-2018- 10:56 AM Bug #4917 (Resolved): Impact Analysis: Saved one image using Greenshot tool and didn't changed any file name. Upload that image and click submit button. Now image is uploaded click on that image link, server error is displayed
- 02:44 PM Bug #4915 (Closed): Impact Analysis: 1. while uploading the small size image, after uploading the image is displayed like broken image. 2.The deleted image is displayed again when uploading the new image Please refer screenshot
- Issue closed on 02-03-2018
- 10:56 AM Bug #4915 (Resolved): Impact Analysis: 1. while uploading the small size image, after uploading the image is displayed like broken image. 2.The deleted image is displayed again when uploading the new image Please refer screenshot
- 02:41 PM Bug #4893 (Closed): HARA-Click on Effects button,pop up window is display, in pop up window can't able to insert Row by pressing ctrl+Insert button
Issue closed on 02-03-2018- 10:57 AM Bug #4893 (Resolved): HARA-Click on Effects button,pop up window is display, in pop up window can't able to insert Row by pressing ctrl+Insert button
- 02:40 PM Bug #4892 (Closed): HARA-Next to Safety Goal comments column is there, entered comment is not getting saved- Scenario Right click on Operational Situation Select the same Operational Situation
- Issue closed on 02-03-2018 in Cycle-5
- 10:55 AM Bug #4892 (Resolved): HARA-Next to Safety Goal comments column is there, entered comment is not getting saved- Scenario Right click on Operational Situation Select the same Operational Situation
- 02:31 PM Bug #4697 (Not Resolved): Form Sheets: In all the Inspection Forms, Right-Arrow is not working and not showing the Next Shift Form
- 02:31 PM Bug #4889 (Closed): In Operational Situation page select the Exposure value of "E1 and E2" then alert message will display, without entering the comment of "Rational and Comments" still "E1 and E2" is allowed to select
- Issue closed on 2-3-18
- 10:53 AM Bug #4889 (Resolved): In Operational Situation page select the Exposure value of "E1 and E2" then alert message will display, without entering the comment of "Rational and Comments" still "E1 and E2" is allowed to select
- 02:26 PM Bug #4888 (Closed): In HARA document delete the existing Safety Goal still ASIL value will display,if we change the Severity/Controllability then ASIL also getting changed, if we don't select the Severity/Controllability then also ASIL Value is displayed.
- Issue closed
- 10:53 AM Bug #4888 (Resolved): In HARA document delete the existing Safety Goal still ASIL value will display,if we change the Severity/Controllability then ASIL also getting changed, if we don't select the Severity/Controllability then also ASIL Value is displayed.
- 02:18 PM Bug #4906 (Closed): Actions Management - Risk - When completing a action from actions management, the same is not reflected in the Boss page. Inprogress and not started also does not have any effect.
- 02:18 PM Bug #4957 (Closed): Detailed Risk Form -> Risk No field is not displaying the data based on risk - business rules settings
- 02:16 PM Bug #4885 (Closed): CM: ECR form Comments entered by the approver is not displayed in the approved ECR document.
- Issue got closed in Cycle 6 in SP730
- 02:15 PM Bug #4881 (Closed): CM-ECR form Approval - Label issue - When approving or Rejecting the Document prompt is displayed as "Label not found".
- Issue got closed in Cycle 6 SP730
- 02:14 PM Bug #4886 (Closed): CM: ECR form Rejection - When the approver rejects the ECR form document at that time it shows "Document is not published"(Sporadic issue).
- Issue got closed in Cycle 6 SP730
- 02:14 PM Bug #4809 (Closed): CM: ECR form: When an approver rejects the document alert displayed with a spelling error.
- Issue got closed in Cycle 6 SP730
- 02:12 PM Bug #4955 (Closed): Risk Setup-> Business Rules-> Preview is not working as expected
- "Preview" button has been removed from the page as discussed
- 02:10 PM Bug #4953 (Closed): Simple Risk form - Risk # is not generated based on “Auto Initial Value"
- 02:07 PM Bug #4952 (Closed): Simple Risk Form-> Risk number is not fully visible to end user
- 02:07 PM Bug #4936 (Closed): In Concern form when custom elements select,multiselect,Checkbox,Radio are modified and saved displays server error (Refer screenshot)
- 10:47 AM Bug #4936 (Resolved): In Concern form when custom elements select,multiselect,Checkbox,Radio are modified and saved displays server error (Refer screenshot)
- 10:47 AM Bug #4936 (In Progress): In Concern form when custom elements select,multiselect,Checkbox,Radio are modified and saved displays server error (Refer screenshot)
- 02:07 PM Bug #4954 (Yet to Verify): (Sporadic) : Not able to view Concern details in Actions → Initiate Problem Solving displayed as "Sorry, an error occurred while processing your request"
- as this issue is sporadic need to verify at diffrent intervals
- 10:47 AM Bug #4954 (Resolved): (Sporadic) : Not able to view Concern details in Actions → Initiate Problem Solving displayed as "Sorry, an error occurred while processing your request"
- 10:46 AM Bug #4954 (In Progress): (Sporadic) : Not able to view Concern details in Actions → Initiate Problem Solving displayed as "Sorry, an error occurred while processing your request"
- 01:58 PM Bug #4236 (Closed): Meetings-> Problem on creating Recurring Meeting
- 01:50 PM Bug #4519 (Closed): Business rules : Not able to reset reminder settings in business rules
- Closed in Cycle 6
- 10:49 AM Bug #4519 (Resolved): Business rules : Not able to reset reminder settings in business rules
- 10:49 AM Bug #4519 (In Progress): Business rules : Not able to reset reminder settings in business rules
- 01:44 PM Bug #4211 (Closed): Proposal Rating -> The added row is disappeared when try to save without duration and rating and team
- 01:40 PM Unit Level and Cosmetic Issues #3780 (Closed): The tooltip displayed is wrong on "Importance Level" in Interested Parties selection page
- 12:51 PM Bug #4921 (Not Resolved): CM: ECR form - Risk and opportunity sheet.
- 12:48 PM Unit Level and Cosmetic Issues #4981 (Closed): CM: Risk form - When Clicking on Reassess risk in detailed risk form in the alert it shows as ! instead of ?
- Issue Got Closed in cycle 6
- 11:53 AM Unit Level and Cosmetic Issues #4981 (Resolved): CM: Risk form - When Clicking on Reassess risk in detailed risk form in the alert it shows as ! instead of ?
- 12:47 PM Bug #4951 (Closed): CM: Risk Numbering format - When the Auto initiate value is set as 1 and in the risk form it shows as 2.
- Issue got closed in CYCLE 6 SP730
- 12:13 PM Bug #4891 (Closed): Inspection Sheet: Given Spec, Low & High Values is not displaying in the Sheet
- This Issue was Verified in Cycle-6 and the Issue was Fixed so the QA Team is Closing this Issue.
- 12:09 PM Bug #4811 (Reopen): CM: ECR form : Risk Form- Clicking on Responsibility person in the Risk form (View risk)User pop dialog displaced incorrectly
- Reopen in CYCLE 6
- 12:09 PM Unit Level and Cosmetic Issues #4777 (Closed): SM:Calendar→By clicking on more options, document details are not visible, its visible only on mouse hover.Status colour is not working
- Closed in CYCLE 6
- 11:53 AM Usability #4840: (Impact) : 8D form usability issues
- 1) Dropdown data visibilty problem when multiple rows are added - Resloved
- 11:50 AM Bug #3905 (Yet to Verify): CM: Allows to Initiate Change request for a project by the person who is not a member of that project.
- 11:45 AM Bug #4950 (Closed): APQP: Risk Numbering format under Business Rule(Risk Setup menu). Please refer the below description.
- Issue got closed in cycle 6 SP730
- 11:43 AM Bug #4834 (Closed): APQP: Import Project using XML shows "Object reference error"(Sporadic).
- Issue Got Closed in Cycle 6 SP730
- 11:43 AM Bug #4890 (Closed): APQP : Routes page(Risk Setup)
- Out of Five issue 4 issue got fixed. Closed in Cycle6 SP730
- 11:28 AM Bug #4980 (Closed): ACtions Management - Risk -Risk details are not displayed when clicking on the complete action link
- 11:22 AM Bug #4869 (Closed): ACtions Management - Simple risk form - WHen adding multiple action plan for a risk and When implement date is not selected, the page is displayed as empty
- 11:21 AM Bug #4750 (Yet to Verify): Reports:In all the reports date is shown as 2018 Feb 9.Before its showing as 9 Feb 2018
- 11:21 AM Unit Level and Cosmetic Issues #4513 (Closed): SM:Reports name should be changed as per new report name in widget settings, My Dashboard.Document Index report is missing in dashborad
- Closed in Cycle 6
- 11:14 AM Bug #4481 (Closed): Recurrence meeting:While creating new Meeting with in the existing Meeting,the created meeting date is not listed.
- Issue Got closed SP730 cycle 6
- 11:13 AM Bug #4897 (Closed): Multidate: When changing the user preference to DD/MM/YYYY then error occurs when viewing the document in Rev history summary
- Closed in Cycle 6
- 11:10 AM Bug #4907 (Closed): Actions Management - Risk Name is displayed as test for some of the actions
- 10:56 AM Bug #4918 (Resolved): In Malfunction, in new row copy n paste the row of 1st malfunction then that ID is getting changed of 1st Mal row
- 10:52 AM Bug #4880 (Resolved): FSR: There is no option to change the color for the Non Standard ASIL Values in the Matrix Cell Values
- 10:51 AM Usability #4949 (Closed): Advanced search:Revise the document from Advanced search→Page is redirected to Actions, its not showing the menus
- Closed in Cycle 6
- 10:48 AM Bug #4868 (Closed): Action Management->Risk Actions->Actions and Description are displaying the same data
- 10:47 AM Bug #4908 (Closed): Actions Management - Risk - Time is not needed to be displayed. if displayed crrect time to be displayed. by default it is dislayed as 12:00
- 09:38 AM Bug #4826 (Closed): Server error while opening the input documents in APQP from deliverable info and document viewer
- 09:34 AM Bug #4088 (Closed): Program charter breadcrumb on clicking server error(New program and Edit program)
- Issue closed in SP 730 cycle 6
- 09:30 AM Bug #4714 (Closed): Charter - When a charter is sent for approval and when the approver clicks on the charter link in the breadcrumb, 403 Forbidden access is displaed.
- 09:30 AM Bug #4830 (Closed): Could not create a new project in APQP. No response on clicking save button in the charter
03/01/2018
- 08:04 PM Bug #4980 (Resolved): ACtions Management - Risk -Risk details are not displayed when clicking on the complete action link
- 06:18 PM Bug #4980 (Open): ACtions Management - Risk -Risk details are not displayed when clicking on the complete action link
- 05:55 PM Bug #4980 (Closed): ACtions Management - Risk -Risk details are not displayed when clicking on the complete action link
- 07:23 PM Bug #4952 (Resolved): Simple Risk Form-> Risk number is not fully visible to end user
- it is a limitation in browser, long word will not wrap if there is no space, i have increased column width
- 04:15 PM Bug #4952 (Open): Simple Risk Form-> Risk number is not fully visible to end user
- 12:45 PM Bug #4952 (Closed): Simple Risk Form-> Risk number is not fully visible to end user
- Risk-> Risk number is not fully visible to end user in simple risk form
Note: The admin assigned Current Risk Numb... - 07:07 PM Bug #4953 (Resolved): Simple Risk form - Risk # is not generated based on “Auto Initial Value"
- 04:15 PM Bug #4953 (Open): Simple Risk form - Risk # is not generated based on “Auto Initial Value"
- 12:46 PM Bug #4953 (Closed): Simple Risk form - Risk # is not generated based on “Auto Initial Value"
- Simple Risk form - Risk # is not generated based on “Auto Initial Value"
- 07:06 PM Bug #4955 (Resolved): Risk Setup-> Business Rules-> Preview is not working as expected
- preview button is removed
- 04:15 PM Bug #4955 (Open): Risk Setup-> Business Rules-> Preview is not working as expected
- 12:49 PM Bug #4955 (Closed): Risk Setup-> Business Rules-> Preview is not working as expected
- Risk Setup-> Business Rules-> Preview is not working as expected
- 07:06 PM Bug #4957 (Resolved): Detailed Risk Form -> Risk No field is not displaying the data based on risk - business rules settings
- 04:15 PM Bug #4957 (Open): Detailed Risk Form -> Risk No field is not displaying the data based on risk - business rules settings
- 12:53 PM Bug #4957 (Closed): Detailed Risk Form -> Risk No field is not displaying the data based on risk - business rules settings
- Detailed Risk Form -> "Risk No" field is not displaying the data based on risk - business rules settings
- 06:54 PM Bug #4950 (Resolved): APQP: Risk Numbering format under Business Rule(Risk Setup menu). Please refer the below description.
- 04:16 PM Bug #4950 (Open): APQP: Risk Numbering format under Business Rule(Risk Setup menu). Please refer the below description.
- 11:51 AM Bug #4950 (Closed): APQP: Risk Numbering format under Business Rule(Risk Setup menu). Please refer the below description.
- Format initiate by column is removed.By default entered value will be displayed.
So when Clicking on Preview no cha... - 06:51 PM Bug #4951 (Resolved): CM: Risk Numbering format - When the Auto initiate value is set as 1 and in the risk form it shows as 2.
- 04:16 PM Bug #4951 (Open): CM: Risk Numbering format - When the Auto initiate value is set as 1 and in the risk form it shows as 2.
- 12:25 PM Bug #4951 (Closed): CM: Risk Numbering format - When the Auto initiate value is set as 1 and in the risk form it shows as 2.
- CM: Risk Numbering format - When the Auto initiate value is set as 1 and in the risk form it shows as 2.
- 06:51 PM Bug #4983 (Resolved): CM: When session get expires it shows as "Error" instead of "Session expired".
- 06:18 PM Bug #4983 (Open): CM: When session get expires it shows as "Error" instead of "Session expired".
- 06:00 PM Bug #4983 (Closed): CM: When session get expires it shows as "Error" instead of "Session expired".
- CM: When session get expires it shows as "Error" instead of "Session expired".
- 06:46 PM Unit Level and Cosmetic Issues #4513 (Resolved): SM:Reports name should be changed as per new report name in widget settings, My Dashboard.Document Index report is missing in dashborad
- 06:28 PM Bug #4236 (Resolved): Meetings-> Problem on creating Recurring Meeting
- Code Change in Repository in method Save meetings in meeting manager.
- 06:19 PM Unit Level and Cosmetic Issues #4981 (Open): CM: Risk form - When Clicking on Reassess risk in detailed risk form in the alert it shows as ! instead of ?
- 05:56 PM Unit Level and Cosmetic Issues #4981 (Closed): CM: Risk form - When Clicking on Reassess risk in detailed risk form in the alert it shows as ! instead of ?
- CM: Risk form - When Clicking on Reassess risk in detailed risk form in the alert it shows as " instead ?
- 06:17 PM Bug #4907: Actions Management - Risk Name is displayed as test for some of the actions
- All Action Management Screens Are Taken from the Scope of SP730 as per the last dev discussion
- 05:49 PM Bug #4907 (Resolved): Actions Management - Risk Name is displayed as test for some of the actions
- 05:00 PM Bug #4907 (Future Release): Actions Management - Risk Name is displayed as test for some of the actions
- 05:49 PM Bug #4906 (Resolved): Actions Management - Risk - When completing a action from actions management, the same is not reflected in the Boss page. Inprogress and not started also does not have any effect.
- 05:00 PM Bug #4906 (Future Release): Actions Management - Risk - When completing a action from actions management, the same is not reflected in the Boss page. Inprogress and not started also does not have any effect.
- 05:47 PM Bug #4973 (Closed): IC Settings: Cant able to Save the Edited/Updated Settings for Chinese/Spanish Languages
- When the User tries to Edit the Setting and Clicking on the Save Button the Edited/Updated was not Saving and the Sav...
- 05:33 PM Bug #4948 (TBD): Advanced search:Clicking on Back link should shows the advanced search results rather its showing the particular level in TOC view
- 05:33 PM Bug #4948 (Future Release): Advanced search:Clicking on Back link should shows the advanced search results rather its showing the particular level in TOC view
- This issue also needs to get more Time to fix moving to SP750 ( Discuss with veera and Sreenija and Bijoy)
- 10:44 AM Bug #4948 (Open): Advanced search:Clicking on Back link should shows the advanced search results rather its showing the particular level in TOC view
- 05:24 PM Usability #4949 (Resolved): Advanced search:Revise the document from Advanced search→Page is redirected to Actions, its not showing the menus
- 10:38 AM Usability #4949 (Open): Advanced search:Revise the document from Advanced search→Page is redirected to Actions, its not showing the menus
- QA missed out this issue in the earlier cycle
- 05:22 PM Bug #4863 (Resolved): Publish for Approval - When publish by auto approval, system is displaying PDF document. But when publishing using approver, HTML document is displayed
- 05:21 PM Unit Level and Cosmetic Issues #4895 (In Progress): IFM: In Function and Requirement pop up window, don't select Function/Requirement row click on Ctrl+Delete button alert pop up is displayed, click on enter alert pop up window is not getting closed
- 05:19 PM Bug #4969 (Closed): Multilanguage- preferences -Preferences - Create a user in chinese/Spanish language. Login as craeted user. Here system hides the suite from the default module dropdown in Preferences page.
- Preferences - Create a user in Chinese/Spanish language. Login as created user. Here system hides the suite from the ...
- 05:11 PM Bug #4844 (Future Release): Aqua Security: Aqua Security is not working
- Moving to SP750 as this issue is deepened on Mark
- 05:06 PM Unit Level and Cosmetic Issues #3780 (Resolved): The tooltip displayed is wrong on "Importance Level" in Interested Parties selection page
- 05:06 PM Bug #4211 (Resolved): Proposal Rating -> The added row is disappeared when try to save without duration and rating and team
- 04:59 PM Bug #4891 (Resolved): Inspection Sheet: Given Spec, Low & High Values is not displaying in the Sheet
- 04:59 PM Bug #4697 (Resolved): Form Sheets: In all the Inspection Forms, Right-Arrow is not working and not showing the Next Shift Form
- 04:59 PM Bug #4832 (Resolved): Rejection Mail: The Sender Name and the GMT Time was incorrect
- 04:58 PM Bug #4916 (Resolved): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- 04:47 PM Bug #3196 (TBD): When forms are interchaged entered data does not gets saved
- Same as the issue in the tracker : moving to TBD
- 04:46 PM Usability #4840 (TBD): (Impact) : 8D form usability issues
- Need to discuss about the Exact behaviour for this issue before fixing this issue
- 04:39 PM Bug #4759 (TBD): Report: Burndown chart does not display the correct values on the graph for remaining and Actual task completed.
- Need to discuss before fixing the issue
- 04:36 PM Bug #4966 (Resolved): Release notes - Corrections in Release notes - Refer screen shot
- 04:27 PM Bug #4966 (Open): Release notes - Corrections in Release notes - Refer screen shot
- 03:42 PM Bug #4966 (Closed): Release notes - Corrections in Release notes - Refer screen shot
- Release notes - Corrections in Release notes - Refer screen shot
- 04:33 PM Bug #3768 (Future Release): PQCT-II: Whole Parent Branch was getting Hided automatically by giving "Hide Branch" for any of its Child Branch
- 04:32 PM Bug #3768 (TBD): PQCT-II: Whole Parent Branch was getting Hided automatically by giving "Hide Branch" for any of its Child Branch
- Dependency on MARK - Mohan will contact MARK on this and will get fixed on SP750
- 04:31 PM Bug #4858 (Future Release): Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- Since the issue is related with Sliver light, and the page is going to change in the next release this issue is movi...
- 04:27 PM Bug #4965 (Open): User creation - Language Preferences in user creation page displays random data in the list.
- 03:39 PM Bug #4965 (Closed): User creation - Language Preferences in user creation page displays random data in the list.
- Language Preferences in user creation page displays random data in the list.
- 04:27 PM Bug #4964 (Open): Multilanguage- User Loggin - When changing the languages for a user, system is displaying alert in first selected language even after changing to other languages.
- 03:35 PM Bug #4964 (Closed): Multilanguage- User Loggin - When changing the languages for a user, system is displaying alert in first selected language even after changing to other languages.
- Multilanguage- User Loggin - When changing the languages for a user, system is displaying alert in first selected lan...
- 04:26 PM Bug #4954 (Open): (Sporadic) : Not able to view Concern details in Actions → Initiate Problem Solving displayed as "Sorry, an error occurred while processing your request"
- 12:50 PM Bug #4954: (Sporadic) : Not able to view Concern details in Actions → Initiate Problem Solving displayed as "Sorry, an error occurred while processing your request"
- Avinash : issue has been communicated to dev team
- 12:48 PM Bug #4954 (Closed): (Sporadic) : Not able to view Concern details in Actions → Initiate Problem Solving displayed as "Sorry, an error occurred while processing your request"
- (Sporadic) : Not able to view Concern details in Actions → Initiate Problem Solving displayed as "Sorry, an error oc...
- 04:20 PM Bug #22 (Resolved): Corrective Action (multi language)
- 03:53 PM Bug #4838 (Resolved): Report : Project summary - Clicking on the risk icon redirected to the risk register report does not display the risk details of the project.
- We have upgraded our base reporting package to SSRS 2012. Drill-through links might not work in lower versions.
- 03:12 PM Bug #4903 (Resolved): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- 03:12 PM Bug #4900 (Resolved): Requirement Tree - Clicking on Context arrow on the first function and requirement table repeatedly is increasing the space between other tables
- 03:11 PM Bug #4088 (Resolved): Program charter breadcrumb on clicking server error(New program and Edit program)
- 03:08 PM Bug #4715 (WAD): When a approver approves a document, all the links in the document and in the breadcrumb should be disabled. JS occurs when clicking on "Add Supplier" link. Occurs when PDF is disabled.
- It is problem with pdf licence , if it get corrected it will be solved. the same issue u have put in 3 different subject
- 03:00 PM Bug #4923 (Resolved): Uploaded audit record doesnot displaye the forms to perform audit
- 02:57 PM Bug #4899 (Resolved): Modules and Site Administrators - Dropdown list is hiding within the Grid after assigning a module and Site rights to the users.
- 02:54 PM Bug #4881 (Resolved): CM-ECR form Approval - Label issue - When approving or Rejecting the Document prompt is displayed as "Label not found".
- 02:54 PM Bug #4884 (Resolved): CM: ECR Risk Form - Risk form details entered in Boss module are displayed in ECR form risk details.
- unable to replicate
- 02:53 PM Bug #4890 (Resolved): APQP : Routes page(Risk Setup)
- 02:53 PM Bug #4885 (Resolved): CM: ECR form Comments entered by the approver is not displayed in the approved ECR document.
- this is not an issue
- 02:52 PM Bug #4908 (Resolved): Actions Management - Risk - Time is not needed to be displayed. if displayed crrect time to be displayed. by default it is dislayed as 12:00
- 02:51 PM Bug #4886 (Resolved): CM: ECR form Rejection - When the approver rejects the ECR form document at that time it shows "Document is not published"(Sporadic issue).
- unable to replicate the issue
- 02:34 PM Bug #4481 (Resolved): Recurrence meeting:While creating new Meeting with in the existing Meeting,the created meeting date is not listed.
- Change in Code in Repository.cs in save meeting method.
- 01:55 PM Bug #3905 (Resolved): CM: Allows to Initiate Change request for a project by the person who is not a member of that project.
- Not a bug after discussing with prabhuram
- 01:52 PM Bug #4714 (Resolved): Charter - When a charter is sent for approval and when the approver clicks on the charter link in the breadcrumb, 403 Forbidden access is displaed.
- Its not a bug . its due pdf Licence issue
- 01:49 PM Bug #4870 (Closed): Actions Management - Risk and oppurtunity form - mitigation actions from risk and oppurtunity & details risk form is not displayed
- 12:44 PM Bug #4819 (Closed): Actions Management - Should be user specific. Now any user can view other users task.
02/28/2018
- 08:12 PM Bug #4882 (Resolved): Auditee response when clicked on the hyperlink displays 500 server error
- 08:11 PM Bug #4882: Auditee response when clicked on the hyperlink displays 500 server error
- Issue Not replicated
- 10:09 AM Bug #4882 (Open): Auditee response when clicked on the hyperlink displays 500 server error
- 07:26 PM Bug #4235 (Future Release): Block Diagram- Add some more element in the block diagram system overlap the added element on the existing element:-Suggestion-earlier it add below the diagram which will not affect the existing diagram
- Need more Effort to make this changes hence moving to SP750. Seems to be the default functionality like Paint Brush.
- 07:25 PM Usability #4912: Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- From Item Definition Menu to TSR Menu, Select any of the Header Column and click on Delete button. Header column is g...
- 06:38 PM Usability #4912 (Open): Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- 07:16 PM Bug #4595 (Closed): Multilanguage - All the Dialog boxes, OK Button is not converted.
- 07:15 PM Bug #4595 (Resolved): Multilanguage - All the Dialog boxes, OK Button is not converted.
- Seems to be understanding issue
- 06:57 PM Usability #4949 (Closed): Advanced search:Revise the document from Advanced search→Page is redirected to Actions, its not showing the menus
- Advanced search:Revise the document from Advanced search→Page is redirected to Actions, its not showing the menus
- 06:54 PM Bug #4880 (Open): FSR: There is no option to change the color for the Non Standard ASIL Values in the Matrix Cell Values
- Duplicate issue : #
- 06:48 PM Bug #4888 (Open): In HARA document delete the existing Safety Goal still ASIL value will display,if we change the Severity/Controllability then ASIL also getting changed, if we don't select the Severity/Controllability then also ASIL Value is displayed.
- 06:47 PM Bug #4889 (Open): In Operational Situation page select the Exposure value of "E1 and E2" then alert message will display, without entering the comment of "Rational and Comments" still "E1 and E2" is allowed to select
- 06:47 PM Bug #4892 (Open): HARA-Next to Safety Goal comments column is there, entered comment is not getting saved- Scenario Right click on Operational Situation Select the same Operational Situation
- QA Missed in the earlier Cycle
- 06:44 PM Bug #4893 (Open): HARA-Click on Effects button,pop up window is display, in pop up window can't able to insert Row by pressing ctrl+Insert button
- 06:43 PM Unit Level and Cosmetic Issues #4895 (Open): IFM: In Function and Requirement pop up window, don't select Function/Requirement row click on Ctrl+Delete button alert pop up is displayed, click on enter alert pop up window is not getting closed
- Validate the issue again before closing.... ( using tab key )
- 06:41 PM Usability #4896 (Closed): HARA-In Functional Analysis click on Failure Modes button, Failure Modes pop up is displayed click on Ctrl+Delete button, "Please select a row to delete" alert is not displayed.
- Seems to be not an issue as CTRL +delete is not added as a functionality now, Consider this when customer demands.
- 06:40 PM Usability #4896 (Open): HARA-In Functional Analysis click on Failure Modes button, Failure Modes pop up is displayed click on Ctrl+Delete button, "Please select a row to delete" alert is not displayed.
- 06:39 PM Bug #4948 (Closed): Advanced search:Clicking on Back link should shows the advanced search results rather its showing the particular level in TOC view
- Advanced search:Clicking on Back link should shows the advanced search results rather its showing the particular leve...
- 06:38 PM Usability #4898 (Open): HARA: Alignment issue In Operational Situation under Exposure pop up window. Please refer screenshot
- 06:37 PM Bug #4915 (Open): Impact Analysis: 1. while uploading the small size image, after uploading the image is displayed like broken image. 2.The deleted image is displayed again when uploading the new image Please refer screenshot
- 06:33 PM Bug #4917 (Open): Impact Analysis: Saved one image using Greenshot tool and didn't changed any file name. Upload that image and click submit button. Now image is uploaded click on that image link, server error is displayed
- 06:29 PM Bug #4919 (Open): Two Safety Goal decompose ASIL Value is D go to Hara and Delete the Safety Goal. Change the S and C and assigning the Same Safety Goal. Now the FSR Document shows the previosuly assigned asil value
- 06:26 PM Bug #4918 (Open): In Malfunction, in new row copy n paste the row of 1st malfunction then that ID is getting changed of 1st Mal row
- 05:50 PM Bug #4936 (Open): In Concern form when custom elements select,multiselect,Checkbox,Radio are modified and saved displays server error (Refer screenshot)
- 04:41 PM Bug #4936 (Closed): In Concern form when custom elements select,multiselect,Checkbox,Radio are modified and saved displays server error (Refer screenshot)
- In Concern form when custom elements like select,multiselect,Checkbox,Radio are modified and saved displays server er...
- 05:49 PM Unit Level and Cosmetic Issues #4859 (Resolved): Resource tracking - Task vs. Resource graph - Project desc label to be changed to Project name.
- 05:49 PM Unit Level and Cosmetic Issues #4860 (Resolved): Reports - resource allocation - " project vs. no of unallocated tasks" to be changed "project vs. no of allocated tasks", since the graph is depicting the no. of allocated tasks for the resource.
- 05:26 PM Bug #1243 (Closed): Issue in Publishing the document from MSA: By changing the Parent Level frequently
- Closed in CYcle 5 of SP730
- 04:51 PM Bug #1243 (Resolved): Issue in Publishing the document from MSA: By changing the Parent Level frequently
- 04:24 PM Bug #4713 (Resolved): Report: Tracking matrix - start date and finish date column displayed with one additional numeric values.
- Fixed in dev
- 04:08 PM Bug #4826 (Resolved): Server error while opening the input documents in APQP from deliverable info and document viewer
- 04:06 PM Bug #4921 (Resolved): CM: ECR form - Risk and opportunity sheet.
- Alert Priority score is correct , label may change from form to form, form service cannot show the label from the form
- 09:57 AM Bug #4921 (Open): CM: ECR form - Risk and opportunity sheet.
- Not expecting the pop up right now if this is using some where in the risk form then it is ok need to discuss mor...
- 09:27 AM Bug #4921 (Closed): CM: ECR form - Risk and opportunity sheet.
- 1)When the Risk value is gets changed because of updating the severity and occurrence it shows alert as priority scor...
- 04:06 PM Bug #4834 (Resolved): APQP: Import Project using XML shows "Object reference error"(Sporadic).
- 03:58 PM Bug #4868 (Resolved): Action Management->Risk Actions->Actions and Description are displaying the same data
- 03:32 PM Bug #4899 (In Progress): Modules and Site Administrators - Dropdown list is hiding within the Grid after assigning a module and Site rights to the users.
- 02:51 PM Bug #4899 (Open): Modules and Site Administrators - Dropdown list is hiding within the Grid after assigning a module and Site rights to the users.
- 03:29 PM Bug #4866 (Resolved): Failure Tree - Failure tree displays blank space when adding more elements in the same level
- 03:15 PM Bug #3807 (Future Release): Process Documents: Giving Delete Override for the empty cell in Product Characteristics its throwing some irrelevant popup message
- Moving this issue in to Future release
- 03:15 PM Bug #3807 (TBD): Process Documents: Giving Delete Override for the empty cell in Product Characteristics its throwing some irrelevant popup message
- 03:14 PM Bug #3842 (Closed): Find & Replace and Restore Changes: By Restoring the changes which was made in the Column by using "Find & Replace" the whole branch was getting hided
- Discuss with Sugesh Sir and confirm that this issue is working as Expected, Will give an fix if any customer rise thi...
- 03:14 PM Bug #3842 (Resolved): Find & Replace and Restore Changes: By Restoring the changes which was made in the Column by using "Find & Replace" the whole branch was getting hided
- Discuss with Sugesh Sir and confirm that this issue is working as Expected, Will give an fix if any customer rise thi...
- 03:05 PM Bug #4901 (Resolved): Failure Tree - Collapsing the context arrow on header element is not collapsing failure alone.
- 02:51 PM Bug #4901 (Open): Failure Tree - Collapsing the context arrow on header element is not collapsing failure alone.
- 03:04 PM Bug #4904 (Resolved): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- 02:51 PM Bug #4904 (Open): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- 03:04 PM Bug #4910 (Resolved): EFC Tree - After adding the Test instance status in DVP&R, System is displaying Error
- 03:03 PM Bug #4910 (In Progress): EFC Tree - After adding the Test instance status in DVP&R, System is displaying Error
- 02:51 PM Bug #4910 (Open): EFC Tree - After adding the Test instance status in DVP&R, System is displaying Error
- 02:51 PM Bug #4908 (Open): Actions Management - Risk - Time is not needed to be displayed. if displayed crrect time to be displayed. by default it is dislayed as 12:00
- 02:51 PM Bug #4907 (Open): Actions Management - Risk Name is displayed as test for some of the actions
- 02:51 PM Bug #4906 (Open): Actions Management - Risk - When completing a action from actions management, the same is not reflected in the Boss page. Inprogress and not started also does not have any effect.
- 02:51 PM Bug #4903 (Open): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- 02:51 PM Bug #4900 (Open): Requirement Tree - Clicking on Context arrow on the first function and requirement table repeatedly is increasing the space between other tables
- 02:50 PM Bug #4923 (Open): Uploaded audit record doesnot displaye the forms to perform audit
- 12:58 PM Bug #4923 (Closed): Uploaded audit record doesnot displaye the forms to perform audit
- Uploaded audit record does not displayed the forms to perform audit.
when clicked on upload button in the empty wind... - 02:48 PM Bug #4890 (Open): APQP : Routes page(Risk Setup)
- 02:43 PM Bug #4869 (Resolved): ACtions Management - Simple risk form - WHen adding multiple action plan for a risk and When implement date is not selected, the page is displayed as empty
- 02:06 PM Bug #4894 (Resolved): Inspection Sheet: Created Rejection Plan is not deleting by Clearing the Rejected Sample Size and again Creating the Reaction Plan it will duplicate the 1st Reaction Plan
- 10:16 AM Bug #4894 (Open): Inspection Sheet: Created Rejection Plan is not deleting by Clearing the Rejected Sample Size and again Creating the Reaction Plan it will duplicate the 1st Reaction Plan
- Need to find what chagnes made in this cycle
- 02:05 PM Bug #4913 (Resolved): Form Sheet: In all the Forms, the Saved Value is not display
- 10:17 AM Bug #4913 (Open): Form Sheet: In all the Forms, the Saved Value is not display
- 12:46 PM Bug #4654 (Closed): Aqua Integration - Security issue
- 10:18 AM Bug #4916 (Open): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- 10:14 AM Bug #4891 (Open): Inspection Sheet: Given Spec, Low & High Values is not displaying in the Sheet
- Need to identify what changes made on the form recently
- 10:01 AM Bug #4886 (Open): CM: ECR form Rejection - When the approver rejects the ECR form document at that time it shows "Document is not published"(Sporadic issue).
- 09:59 AM Bug #4885 (Open): CM: ECR form Comments entered by the approver is not displayed in the approved ECR document.
- 09:58 AM Bug #4884 (Open): CM: ECR Risk Form - Risk form details entered in Boss module are displayed in ECR form risk details.
- 09:51 AM Bug #4881 (Open): CM-ECR form Approval - Label issue - When approving or Rejecting the Document prompt is displayed as "Label not found".
- This was working as expected in the last build
02/27/2018
- 08:29 PM Bug #4882: Auditee response when clicked on the hyperlink displays 500 server error
- Issue Not replicated
- 02:31 PM Bug #4882 (Closed): Auditee response when clicked on the hyperlink displays 500 server error
- Auditee response when clicked on the hyperlink displays 500 server error.
but where as in chines user preference it ... - 08:11 PM Unit Level and Cosmetic Issues #4777 (Resolved): SM:Calendar→By clicking on more options, document details are not visible, its visible only on mouse hover.Status colour is not working
- 07:38 PM Bug #4750: Reports:In all the reports date is shown as 2018 Feb 9.Before its showing as 9 Feb 2018
- Reports setting problem
- 07:32 PM Bug #4750 (Resolved): Reports:In all the reports date is shown as 2018 Feb 9.Before its showing as 9 Feb 2018
- 07:28 PM Bug #4919 (Closed): Two Safety Goal decompose ASIL Value is D go to Hara and Delete the Safety Goal. Change the S and C and assigning the Same Safety Goal. Now the FSR Document shows the previosuly assigned asil value
- Two Safety Goal decompose ASIL Value is D go to Hara and Delete the Safety Goal. Change the S and C and assigning the...
- 07:23 PM Bug #4918 (Closed): In Malfunction, in new row copy n paste the row of 1st malfunction then that ID is getting changed of 1st Mal row
- In Malfunction, in new row copy n paste the row of 1st malfunction then that ID is getting changed of 1st Mal row
- 07:13 PM Bug #4917 (Closed): Impact Analysis: Saved one image using Greenshot tool and didn't changed any file name. Upload that image and click submit button. Now image is uploaded click on that image link, server error is displayed
- Impact Analysis: Saved one image using Greenshot tool and didn't changed any file name. Upload that image and click s...
- 07:10 PM Bug #4916 (Closed): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- In the Customize Email Messages Menu, While viewing the Default Mail Content in the Out of Control Grid it shows Empt...
- 06:55 PM Bug #4915 (Closed): Impact Analysis: 1. while uploading the small size image, after uploading the image is displayed like broken image. 2.The deleted image is displayed again when uploading the new image Please refer screenshot
- Impact Analysis:
1. while uploading the small size image, after uploading the image is displayed like broken image.... - 06:30 PM Bug #4913 (Closed): Form Sheet: In all the Forms, the Saved Value is not display
- In all the Form Sheets, Click the Saved Inspected Value field and Clear the Sample again it will refresh the field an...
- 06:29 PM Usability #4912 (Closed): Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot.
1.Item Definition-... - 06:27 PM Bug #4910 (Closed): EFC Tree - After adding the Test instance status in DVP&R, System is displaying Error
- EFC Tree - After adding the Test instance status in DVP&R, System is displaying Error
- 06:22 PM Bug #4897 (Resolved): Multidate: When changing the user preference to DD/MM/YYYY then error occurs when viewing the document in Rev history summary
- 05:45 PM Bug #4897 (Open): Multidate: When changing the user preference to DD/MM/YYYY then error occurs when viewing the document in Rev history summary
- 05:45 PM Bug #4897 (TBD): Multidate: When changing the user preference to DD/MM/YYYY then error occurs when viewing the document in Rev history summary
- 05:45 PM Bug #4897 (Yet to Verify): Multidate: When changing the user preference to DD/MM/YYYY then error occurs when viewing the document in Rev history summary
- 05:29 PM Bug #4897 (Reopen): Multidate: When changing the user preference to DD/MM/YYYY then error occurs when viewing the document in Rev history summary
- 05:29 PM Bug #4897 (Closed): Multidate: When changing the user preference to DD/MM/YYYY then error occurs when viewing the document in Rev history summary
- Multidate: When changing the user preference to DD/MM/YYYY then error occurs when viewing the document in Rev history...
- 06:22 PM Bug #4908 (Closed): Actions Management - Risk - Time is not needed to be displayed. if displayed crrect time to be displayed. by default it is dislayed as 12:00
- 06:19 PM Bug #4907 (Closed): Actions Management - Risk Name is displayed as test for some of the actions
- 06:16 PM Bug #4906 (Closed): Actions Management - Risk - When completing a action from actions management, the same is not reflected in the Boss page. Inprogress and not started also does not have any effect.
- 06:13 PM Bug #4437 (Closed): SM:No need of owned documents widget(It should be removed from widget settings also)
- Closed in Cycle 5
- 06:12 PM Unit Level and Cosmetic Issues #4554 (Closed): Document Management→Move, move and reset rights button, Move and reset heading labels are missing
- As discussed with Bijoy and Sabu, Closing the issue since the labels are not converted
- 02:19 PM Unit Level and Cosmetic Issues #4554 (Not Resolved): Document Management→Move, move and reset rights button, Move and reset heading labels are missing
- Move and reset button is not converted
- 06:11 PM Unit Level and Cosmetic Issues #4552 (Closed): Doc pro settings→NewDocFieldsMandatory and AllowSameDocNumNamefromother levels labels are missing
- As discussed with Bijoy and Sabu, Closing the issue since the labels are not converted
- 04:02 PM Unit Level and Cosmetic Issues #4552 (Not Resolved): Doc pro settings→NewDocFieldsMandatory and AllowSameDocNumNamefromother levels labels are missing
- 06:10 PM Unit Level and Cosmetic Issues #4555 (Closed): Reason for move and ok labels are missing.click ok without entering the reason for move→Label missing
- As discussed with Bijoy and Sabu, Closing the issue since the labels are not converted
- 04:03 PM Unit Level and Cosmetic Issues #4555 (Not Resolved): Reason for move and ok labels are missing.click ok without entering the reason for move→Label missing
- 06:09 PM Bug #4904 (Closed): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- 06:06 PM Bug #4903 (Closed): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- •EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child t...
- 06:01 PM Bug #4901 (Closed): Failure Tree - Collapsing the context arrow on header element is not collapsing failure alone.
- •Collapsing the context arrow on header element is not collapsing failure alone.
•Arrow direction is wrong after all... - 06:00 PM Unit Level and Cosmetic Issues #4459 (Closed): Folder Management for other modules:Access for sites/group/users:Site rights is displayed as -1(For no access its showing null by default)
- No need to show keys for rights,,minus issue is closed.Closing in cycle 5
- 05:00 PM Unit Level and Cosmetic Issues #4459 (Resolved): Folder Management for other modules:Access for sites/group/users:Site rights is displayed as -1(For no access its showing null by default)
- 05:57 PM Bug #4900 (Closed): Requirement Tree - Clicking on Context arrow on the first function and requirement table repeatedly is increasing the space between other tables
- Requirement Tree - Clicking on Context arrow on the first function and requirement table repeatedly is increasing th...
- 05:48 PM Bug #4899 (Closed): Modules and Site Administrators - Dropdown list is hiding within the Grid after assigning a module and Site rights to the users.
- Modules and Site Administrators - Dropdown list is hiding within the Grid after assigning a module and Site rights to...
- 05:32 PM Usability #4898 (Closed): HARA: Alignment issue In Operational Situation under Exposure pop up window. Please refer screenshot
- HARA: Alignment issue In Operational Situation under Exposure pop up window. Please refer screenshot
- 05:30 PM Bug #4845 (Closed): TOC:Error occurs when clicking on View source file(Same when clicking on download icon in rev history summary)
- Closed in cycle 5
- 02:26 PM Bug #4845 (Yet to Verify): TOC:Error occurs when clicking on View source file(Same when clicking on download icon in rev history summary)
- 05:28 PM Usability #4896 (Closed): HARA-In Functional Analysis click on Failure Modes button, Failure Modes pop up is displayed click on Ctrl+Delete button, "Please select a row to delete" alert is not displayed.
- HARA-In Functional Analysis click on Failure Modes button, Failure Modes pop up is displayed click on Ctrl+Delete but...
- 05:28 PM Bug #4853 (Closed): Multidate: When changing the user preference to DD/MM/YYYY then in docpro not able to view the document.
- Closed in tOC Cycle 5
- 02:26 PM Bug #4853 (Yet to Verify): Multidate: When changing the user preference to DD/MM/YYYY then in docpro not able to view the document.
- 05:24 PM Bug #4841 (Closed): Common for all modules : Not able to view published document attachments in doc viewer , server error is displayed (Refer screenshot)
- Closed in cycle 5
- 02:26 PM Bug #4841 (Yet to Verify): Common for all modules : Not able to view published document attachments in doc viewer , server error is displayed (Refer screenshot)
- 05:20 PM Bug #4869: ACtions Management - Simple risk form - WHen adding multiple action plan for a risk and When implement date is not selected, the page is displayed as empty
- Closed by mistake. so had to reopen.
- 05:20 PM Bug #4869 (Reopen): ACtions Management - Simple risk form - WHen adding multiple action plan for a risk and When implement date is not selected, the page is displayed as empty
- 05:19 PM Bug #4869 (Closed): ACtions Management - Simple risk form - WHen adding multiple action plan for a risk and When implement date is not selected, the page is displayed as empty
- 03:17 PM Bug #4869 (Yet to Verify): ACtions Management - Simple risk form - WHen adding multiple action plan for a risk and When implement date is not selected, the page is displayed as empty
- 05:19 PM Bug #4469 (Closed): User Training Log:Details are getting duplicated whenever any user is giving sign off for the document(Impact→When the page number is changed in dropdown then the user list order is changing)
- Closed in Cycle 5
- 02:26 PM Bug #4469 (Yet to Verify): User Training Log:Details are getting duplicated whenever any user is giving sign off for the document(Impact→When the page number is changed in dropdown then the user list order is changing)
- 05:17 PM Bug #4575 (Closed): Validation alert in template screen are not converted
- 05:17 PM Bug #4709 (Closed): Chinese & Spanish Language: Labels are not changed some of them are in "??" symbol some of them are having "THL" along with Menu Names
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 05:03 PM Bug #4709 (Resolved): Chinese & Spanish Language: Labels are not changed some of them are in "??" symbol some of them are having "THL" along with Menu Names
- As per discussion with QA.
- 05:13 PM Unit Level and Cosmetic Issues #4895 (Closed): IFM: In Function and Requirement pop up window, don't select Function/Requirement row click on Ctrl+Delete button alert pop up is displayed, click on enter alert pop up window is not getting closed
- IFM: In Function and Requirement pop up window, don't select Function/Requirement row click on Ctrl+Delete button ale...
- 05:13 PM Bug #4819 (Yet to Verify): Actions Management - Should be user specific. Now any user can view other users task.
- 05:02 PM Bug #4819 (Resolved): Actions Management - Should be user specific. Now any user can view other users task.
- 12:03 PM Bug #4819: Actions Management - Should be user specific. Now any user can view other users task.
- PS has below scenario.
Module champion can view all the actions assigned to Team members and even they can update.
... - 05:11 PM Bug #4817 (Closed): Actions Management - Server error when trying to complete a task from Action Management page. Screenshot is attached for reference.
- 05:02 PM Bug #4817 (Resolved): Actions Management - Server error when trying to complete a task from Action Management page. Screenshot is attached for reference.
- 05:03 PM Bug #4577 (Closed): In template creation screen after creating template using chinese language after save displays template name as "?????"
- 04:39 PM Bug #4486 (Closed): Production Trackingsheet Menu: By Clicking on the 1st Grid's PI Name the 2nd Grid is not showing the Properly
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 04:38 PM Bug #4486 (Resolved): Production Trackingsheet Menu: By Clicking on the 1st Grid's PI Name the 2nd Grid is not showing the Properly
- 04:36 PM Unit Level and Cosmetic Issues #4848 (Closed): Inspection Plans Menu: Want to Change the Name as Inspection Sheet instead of Production Trackingsheet
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 04:01 PM Unit Level and Cosmetic Issues #4848 (Resolved): Inspection Plans Menu: Want to Change the Name as Inspection Sheet instead of Production Trackingsheet
- 11:59 AM Unit Level and Cosmetic Issues #4848 (Open): Inspection Plans Menu: Want to Change the Name as Inspection Sheet instead of Production Trackingsheet
- 04:35 PM Unit Level and Cosmetic Issues #4850 (Closed): Groups Menu: In the Access Rights for the Operators, Inspection Sheet Name should be there instead of Production Trackingsheet
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 04:00 PM Unit Level and Cosmetic Issues #4850 (Resolved): Groups Menu: In the Access Rights for the Operators, Inspection Sheet Name should be there instead of Production Trackingsheet
- 11:59 AM Unit Level and Cosmetic Issues #4850 (Open): Groups Menu: In the Access Rights for the Operators, Inspection Sheet Name should be there instead of Production Trackingsheet
- 04:27 PM Bug #4894 (Closed): Inspection Sheet: Created Rejection Plan is not deleting by Clearing the Rejected Sample Size and again Creating the Reaction Plan it will duplicate the 1st Reaction Plan
- 1.In the Inspection Sheet, the Created Reaction Plan for the Rejected Sample is not disappearing while Editing the sa...
- 04:24 PM Bug #3608 (Closed): Language preference is not working as expected - Refresh issue, and not listing in the Drop down.
- Closed in SP730 Cycle 5.
- 04:20 PM Bug #4593 (Closed): Entity Owner : Entity not listing when the language is changed.
- Closed in SP730 Cycle 5.
- 04:08 PM Bug #4014 (Not Resolved): Multilang(Chinese and spanish) : "Document rights" header label and * search column order is W.R.T table's column order label are not converted
- *search column order is W.R.T table's column order label are not converted
- 04:04 PM Bug #4738 (Closed): Advanced search:Integrated documents label is not converted
- Closed in Cycle 5
- 04:00 PM Bug #4875 (Closed): No email is getting generated after auditor and auditee not confirms their availability
- 03:39 PM Bug #4875: No email is getting generated after auditor and auditee not confirms their availability
- Issue Can't able to replicate. Kindly find the attached screen-shot.
- 03:32 PM Bug #4875 (Resolved): No email is getting generated after auditor and auditee not confirms their availability
- 11:51 AM Bug #4875 (Not Resolved): No email is getting generated after auditor and auditee not confirms their availability
- 03:48 PM Bug #4893 (Closed): HARA-Click on Effects button,pop up window is display, in pop up window can't able to insert Row by pressing ctrl+Insert button
- HARA-Click on Effects button,pop up window is display, in pop up window can't able to insert Row by pressing ctrl+Ins...
- 03:43 PM Bug #4892 (Closed): HARA-Next to Safety Goal comments column is there, entered comment is not getting saved- Scenario Right click on Operational Situation Select the same Operational Situation
- HARA-Next to Safety Goal comments column is there, entered comment is not getting saved- Scenario Right click on Oper...
- 03:41 PM Bug #4806 (Closed): Entity - While creating a Site, clicking on Save button system does not respond
- Closed in SP730 Cycle 5.
- 03:41 PM Bug #4891 (Closed): Inspection Sheet: Given Spec, Low & High Values is not displaying in the Sheet
- For the Inprocess Inspection, The Specification, Low & High Values, Evaluation Tech Values was Set and Saved in the C...
- 03:40 PM Bug #4747 (Closed): UBM: Reminder and Escalation emails are not generated .
- 03:39 PM Bug #4808 (Closed): Preferences - While changing the layout from Social media to Ewqims, system is displaying Preferences page instead of default landing page.
- Closed in SP730 Cycle 5.
- 03:36 PM Bug #4890 (Closed): APQP : Routes page(Risk Setup)
- 1)After assigning the route to risk area page is redirected to risk area tab.
2)Not able to assign route when "None"... - 03:36 PM Bug #4812 (Closed): Preferences- Default Module dropdown does not display Functional Safety module
- Closed in SP730 Cycle 5.
- 03:34 PM Bug #4889 (Closed): In Operational Situation page select the Exposure value of "E1 and E2" then alert message will display, without entering the comment of "Rational and Comments" still "E1 and E2" is allowed to select
- In Operational Situation page select the Exposure value of "E1 and E2" then alert message will display, without enter...
- 03:28 PM Bug #4868 (Not Resolved): Action Management->Risk Actions->Actions and Description are displaying the same data
- 03:28 PM Bug #4870 (Yet to Verify): Actions Management - Risk and oppurtunity form - mitigation actions from risk and oppurtunity & details risk form is not displayed
- 03:26 PM Bug #4888 (Closed): In HARA document delete the existing Safety Goal still ASIL value will display,if we change the Severity/Controllability then ASIL also getting changed, if we don't select the Severity/Controllability then also ASIL Value is displayed.
- In HARA document delete the existing Safety Goal still ASIL value will display,if we change the Severity/Controllabil...
- 03:25 PM Bug #4745 (Closed): The notification email for the scheduled UBM Workorder subject displays wrong content.
- 03:21 PM Bug #4647 (Closed): Equipment Part Production : On entering the scrapped value as 5 , in the Quality loss field - Scrapped product count is showing as 10 .
- 03:18 PM Bug #4871 (Closed): Actions Mgt - Deleted actions should not be listed in actions page
- Closed in SP730 cycle 5.
- 03:15 PM Bug #4863 (Not Resolved): Publish for Approval - When publish by auto approval, system is displaying PDF document. But when publishing using approver, HTML document is displayed
- 01:49 PM Bug #4863 (Resolved): Publish for Approval - When publish by auto approval, system is displaying PDF document. But when publishing using approver, HTML document is displayed
- 01:47 PM Bug #4863 (Not Resolved): Publish for Approval - When publish by auto approval, system is displaying PDF document. But when publishing using approver, HTML document is displayed
- While auto approval is selected system displays error.(Refer Screen shot)
- 03:14 PM Bug #4886 (Closed): CM: ECR form Rejection - When the approver rejects the ECR form document at that time it shows "Document is not published"(Sporadic issue).
- CM: ECR form Rejection - When the approver rejects the ECR form document at that time it shows "Document is not publi...
- 03:10 PM Bug #4780 (Closed): In Findings Aging report, if the user tries to view the reports it shows no data available, but there are Findings available in the Application.
- 03:08 PM Bug #4885 (Closed): CM: ECR form Comments entered by the approver is not displayed in the approved ECR document.
- CM: ECR form Comments entered by the approver is not displayed in the approved ECR document.
- 03:06 PM Bug #4779 (Closed): In Consolidated NC Report, the Findings Count display wrong number.
- 03:03 PM Bug #4856 (Closed): In All the reports, the newly entered data in the application is not getting listed in the Reports, Even after running the jobs in server.
- 03:02 PM Bug #4622 (Closed): Suite : On deletion of logged in user, system is allowing to do all activities even after refreshing the page.
- 02:59 PM Bug #4781 (Closed): In Findings Closure report, the Findings count displays wrong count.
- 02:59 PM Bug #1608 (Closed): VOC: Issue in VOC Number Repeateable
- Closed in SP730 cycle 5
- 02:58 PM Bug #1652 (Closed): Multi Language: Issue in Diagram(Requirement tree, Failure tree and EFC Tree)
- Closed in SP730 cycle 5
- 02:58 PM Bug #4768 (Closed): Reports: Update Reports Dialog Box was displaying below the Bar Charts
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:56 PM Bug #4768 (Yet to Verify): Reports: Update Reports Dialog Box was displaying below the Bar Charts
- 02:56 PM Bug #4873 (Yet to Verify): Social Media: In the My Dashboard for Worst Supplier Reports its showing wrongly
- 02:54 PM Bug #1653: Multi Language: Right click context menu(Delete VOC) not converted.
- Closed in SP730 Cycle 5
- 02:54 PM Bug #1653 (Closed): Multi Language: Right click context menu(Delete VOC) not converted.
- 02:54 PM Bug #4832 (Not Resolved): Rejection Mail: The Sender Name and the GMT Time was incorrect
- This Issue was Verified in Cycle-5 and the Issue was not Fixed so the QA Team is Changing the Status into Not Resolved.
- 02:44 PM Bug #1619 (Closed): Multi-Language: Issue in Alert Message
- 02:42 PM Bug #4884 (Closed): CM: ECR Risk Form - Risk form details entered in Boss module are displayed in ECR form risk details.
- CM: ECR Risk Form - Risk form details entered in Boss module are displayed in ECR form risk details.
- 02:42 PM Bug #22 (Not Resolved): Corrective Action (multi language)
- Issue is not fixed because when user preference is set to Chinese does not display blank alert.
but where as in Span... - 02:42 PM Usability #4883 (Closed): SIte dropdown should shows the site based on the module site selection (Same in All screens across doc pro)
- SIte dropdown should shows the site based on the module site selection
- 02:41 PM Bug #3764 (Closed): Production TrackingSheet Menu: Can't able to Create the Concern for the Rejected Sample Pieces in the Reaction Plan
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:41 PM Bug #4202 (Closed): Inspection Plans Menu: The Bubbles disappears by clicking on the Status Color for the Year-Wise Calendar
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 11:28 AM Bug #4202 (Resolved): Inspection Plans Menu: The Bubbles disappears by clicking on the Status Color for the Year-Wise Calendar
- 02:39 PM Bug #4697 (Not Resolved): Form Sheets: In all the Inspection Forms, Right-Arrow is not working and not showing the Next Shift Form
- This Issue was Verified in Cycle-5 and the Issue was not Fixed so the QA Team is Changing the Status into Not Resolved.
- 02:38 PM Bug #4635 (Closed): In Docpro Reason for change grid shows in Html tag .
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:30 PM Bug #4828 (Closed): Inspection Sheet Menu: Unwanted Alert Message displaying for the Rejection Sample
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:29 PM Bug #4833 (Closed): Inspection Sheet Menu: Reaction Plan is not Creating for the Rejected Sample
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:29 PM Bug #4835 (Closed): Inspection Sheet Menu: Scheduled Inspection/Operations are not listing for the Scheduled Production in the Menu
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:28 PM Bug #4847 (Closed): Inspection Plans Menu: Scheduled PI lists is not showing on the Calendar for Inprocess Inspection
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:27 PM Bug #4881 (Closed): CM-ECR form Approval - Label issue - When approving or Rejecting the Document prompt is displayed as "Label not found".
- CM-ECR form Approval - Label issue - When approving or Rejecting the Document prompt is displayed as "Label not found".
- 02:26 PM Usability #4139 (Closed): Proposal Rating->Design issue in proposal rating page
- 02:24 PM Bug #4581 (Closed): In LPA schedule equipment's done button label issue
- 02:24 PM Bug #4810 (Closed): Doc pro Setting:Need to change the download size limit
- Closed in Cycle 5
- 02:22 PM Bug #4362 (Closed): Benchmark->The benchmark page is not displaying the data based on "Expectation Category" Selection
- 02:20 PM Bug #4855 (Closed): Form Sheet: Row Deletion and Clear Button is not working properly in the Sample Size for the Inspected Value Column
- 02:20 PM Bug #4855: Form Sheet: Row Deletion and Clear Button is not working properly in the Sample Size for the Inspected Value Column
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:19 PM Bug #4857 (Closed): Production Scheduling Menu: Shifts Window its not showing as per the Site Specific but in Running Parts its showing as per the Site Specific
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:16 PM Bug #4865 (Closed): Inspection Sheet: For the Normal Scheduling Method, Cant able to continue the Work-Flow
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:16 PM Bug #4657 (Closed): CM: when trying to change the approval date in the ECN form it shows field is non editable but the date format gets changed to mm/dd/yy from dd/mm/yy.
- 02:15 PM Bug #4867 (Closed): Social Media for Inspection Plan Menu: Viewing for Inprocess Inspection Calendar it showing an Alert Message as "there was an error while fetching events"
- This Issue was Verified in Cycle-5 and the Issue was Fixed so the QA Team is Closing this Issue.
- 02:13 PM Unit Level and Cosmetic Issues #4556 (Closed): Edit Document→ Enter the same document number and name which is used in other levels or from the same level →Click save→ Alert message Label missing(same in New document request and draft)
- Closed in Cycle 5
- 02:10 PM Bug #4557 (Closed): Edit document→when clicking save button→No response
- Closed in Cycle 5
- 02:08 PM Bug #4880 (Closed): FSR: There is no option to change the color for the Non Standard ASIL Values in the Matrix Cell Values
- FSR: In FSR Page Click on ASIL Legend icon and in the Matrix Cell Values pop up window. FSR: There is no option to ch...
- 02:03 PM Bug #4076 (Closed): Multisite : Concern form details when modified in corp site affects concern created in other sites based on corp form details
- 02:02 PM Bug #4688 (Closed): Entity Selection List -> The BOSS administrator could not able to select some entities from this list
- Team Entity selection is showing all the data
- 01:54 PM Bug #4132 (Closed): Improvement Proposal -> The module admin could add Proposal type. But the system not allowing to edit/delete proposal types
- 01:54 PM Bug #4339 (Closed): Concern form with same name is created in default concern form - Refer steps &screenshot
- 01:52 PM Usability #4335 (Closed): Business Rules -> The page should display "Select All / Check All " Check box in activity listing page
- 01:50 PM Bug #4699 (Closed): Risk Setup -> Routes tab is not showing the default route list
- 01:50 PM Usability #4376 (Closed): Social Media : Usability Issues (Refer Description and screenshot)
- 01:48 PM Bug #4197 (Yet to Verify): BOM - While creating a PI from BOM, PI creation window is not closing once the PI is created. So I can able to create same PI for multiple times
- 01:37 PM Bug #4197 (Resolved): BOM - While creating a PI from BOM, PI creation window is not closing once the PI is created. So I can able to create same PI for multiple times
- 01:48 PM Bug #4595 (In Progress): Multilanguage - All the Dialog boxes, OK Button is not converted.
- 01:23 PM Bug #4595 (Not Resolved): Multilanguage - All the Dialog boxes, OK Button is not converted.
- 01:48 PM Bug #2621 (Closed): FSR - When an Add ASIL is done for a Decomposed function System displays a wrong ASIL Value.(Refer Description)
- Issue closed on 27-02-2017 in Cycle-5
- 01:47 PM Bug #4641 (Closed): Multisite (Impact) : Not able to associate categories & sub categories to concern form
- 01:25 PM Bug #4748 (Closed): In Chinese language, some of the labels are missing.
- 01:19 PM Bug #4823 (Closed): Requirement Tree - Click on the context arrow after flow down is done(ONLY Elements). Again click on the context arrow. Here System does not collapse all the elements and when clicking the arrow again it displays all the elements repeatedly
- Closed in SP730 Cycle 5
- 01:17 PM Bug #4430 (Closed): IFM- System allow to allocate a cell code for the function of FSR when the show functional safety function check box is enabled, as per discussion need to restrict the allocation to those function
- Issue closed on 27-02-2017 in Cycle-5
- 10:46 AM Bug #4430 (Resolved): IFM- System allow to allocate a cell code for the function of FSR when the show functional safety function check box is enabled, as per discussion need to restrict the allocation to those function
- 01:13 PM Bug #4866 (Not Resolved): Failure Tree - Failure tree displays blank space when adding more elements in the same level
- System displays same tables for multiple times.(Refer screenshot)
- 12:59 PM Bug #4824 (Closed): Tree Diagrams - Flowdown Indicator shows different colours when allocating elements
- Closed in SP730 Cycle 5
- 12:57 PM Usability #4674 (Closed): Part selection window is not displayed as expected (Refer screenshot)
- 12:56 PM Bug #4864 (Closed): Draft status is wrong for the approved document only when first revision is converted to document and second revision is terminated
- Status is removed now, Draft Status itself is not handled so closing the issue in Cycle 5
- 12:55 PM Bug #4560 (Closed): Website Testing:while attaching optional files for Findings in auditee login displays 500 server error
- The reported issue is fixed does not display serve error when attached but identified Impact not able to attach multi...
- 12:53 PM Usability #4678 (Closed): Add Champion user listing page displayed not displayed as expected (Refer steps and screenshot)
- 12:51 PM Bug #4803 (Closed): Multisite (impact) : Not able to reopen closed conern in other sites
- 12:51 PM Bug #4829 (Closed): Admin actions:ReAssign author icon is missing
- Closed in cycle 5
- 12:39 PM Usability #4876 (Closed): Gage list by study Results : On Selection of Type "All" the gage number field is displaying only the variable gages. To get all gages as "All" in gage number field, we need to select any one type then again need to select All.
- 12:19 PM Usability #4876 (Resolved): Gage list by study Results : On Selection of Type "All" the gage number field is displaying only the variable gages. To get all gages as "All" in gage number field, we need to select any one type then again need to select All.
- 11:59 AM Usability #4876 (Open): Gage list by study Results : On Selection of Type "All" the gage number field is displaying only the variable gages. To get all gages as "All" in gage number field, we need to select any one type then again need to select All.
- 12:39 PM Bug #4843 (Closed): Multisite (impact) : Problem classification,phase deadline,concern form when same data is used across sites elements are duplicated
- 12:38 PM Bug #4861 (Closed): CM: ECR form Insert comment issue - Entering more than 100 letters in the comment box shows Object error.
- 12:36 PM Unit Level and Cosmetic Issues #4821 (Closed): CM: ECN Mail content need to be changed as "This email is to notify you that the change requested for the project Change Bleed X8745 is implemented"
- 12:36 PM Bug #4818 (Closed): CM: Approval notification-In the Approval notification mail generated from DocPro, it shows changes made:19
- 12:35 PM Bug #4816 (Closed): CM:ECR form:Risk form-Clicking on risk item hyperlink in the Detailed risk form shows Data cannot be found.
- 12:35 PM Bug #4811 (Closed): CM: ECR form : Risk Form- Clicking on Responsibility person in the Risk form (View risk)User pop dialog displaced incorrectly
- 12:20 PM Bug #4511: TOC:Default sorting should displays max to min(Number sort) in single page as well as multi page TOC
- Closed in Cycle 5
- 12:19 PM Bug #4511 (Closed): TOC:Default sorting should displays max to min(Number sort) in single page as well as multi page TOC
- 12:13 PM Bug #4825 (Closed): VOC - Test instance status is not displayed in VOC
- Closed in SP730 Cycle 5
- 12:11 PM Unit Level and Cosmetic Issues #4201 (Closed): Requirements - Alert for saving empty requirements is not good
- Closed in SP730 Cycle 5
- 11:34 AM Unit Level and Cosmetic Issues #4201 (Resolved): Requirements - Alert for saving empty requirements is not good
- 12:11 PM Bug #4797 (Closed): DocPro Level selection- Entering the level name and clicking on search displays the level structure twice.(Folder Structure is displayed twice)(Common for all modules)
- 12:09 PM Bug #4807 (Closed): Multisite:Cant able to request a new document for other sites.By default the document is requested for corporate even though the user select different site
- Cant able to replicate.So closing in Cycle 5
- 12:09 PM Bug #2241 (Closed): (Website)AQuA: While clicking into AQuA related screen, system displays "500-Internal Server Error"
- Closing IN SP730 Cycle 5
- 12:08 PM Bug #4851 (Closed): In Audit Program, once the program manager is changed, it Should not reflect in Re upload approver page,but it is getting changed there too.
- 12:00 PM Bug #4872 (Not Resolved): Multisite (impact) : corporate concern form when edited & saved in other sites displayed as form name exists
- 11:59 AM Unit Level and Cosmetic Issues #4860 (Open): Reports - resource allocation - " project vs. no of unallocated tasks" to be changed "project vs. no of allocated tasks", since the graph is depicting the no. of allocated tasks for the resource.
- 11:59 AM Unit Level and Cosmetic Issues #4859 (Open): Resource tracking - Task vs. Resource graph - Project desc label to be changed to Project name.
- 11:59 AM Usability #4840 (Open): (Impact) : 8D form usability issues
- 11:59 AM Bug #4592 (Closed): In perform audit while attaching audit attachments displays error
- 11:58 AM Bug #4842 (Closed): Impact :Current team details are not listed in Corporate when user tries to select team in concern form
- 11:53 AM Bug #4862 (Closed): Actual audit terminated email is not working
- 11:47 AM Bug #4679 (Closed): Issue in HARA Document. Please see the Description
- Issue closed on 27-02-2017 in Cycle-5
- 11:03 AM Bug #4764 (Closed): Not able to close concern following L0 approach
Also available in: Atom