Activity
From 10/09/2019 to 11/07/2019
11/07/2019
- 05:11 PM Bug #14846: Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Published the ECR form - But document not yet converted
- 03:42 PM Bug #14750 (Not Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- The selected document is not attached to the meeting attachments(attach from Docpro)
- 03:42 PM Bug #14816 (Closed): MR approval is not working after validation and verification completed
- Verified in SP_915 Cy-6 verified MR approval work flow
- 03:41 PM Bug #14828 (Closed): NC category:Irrelevant Nc category is display while raised NC .
- Verified in SP_915 Cy-6
- 03:40 PM Bug #14824 (Closed): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- Verified in CY-6 and Closed
- 03:37 PM Bug #14699 (Not Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 03:30 PM Bug #14841 (In Progress): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:17 PM Bug #14841 (Not Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 10:33 AM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:29 PM Bug #14843 (In Progress): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 03:11 PM Bug #14843 (Not Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- Issue remains the same
- 10:47 AM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 03:19 PM Bug #14856 (Closed): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 10:49 AM Bug #14856 (Resolved): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 10:48 AM Bug #14856 (Open): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 03:03 PM Bug #14517 (Closed): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Working fine
- 03:03 PM Bug #14831 (Closed): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- Working fine
- 03:03 PM Bug #14675 (Closed): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- Working fine
- 02:49 PM Bug #14860: Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- Please let me know the root cause to replicate the issue
- 02:46 PM Bug #14860 (Closed): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- Multi document upload: When uploading multiple docs twice, then when trying to open the latest uploaded document, sho...
- 01:09 PM Bug #14859 (Closed): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 12:35 PM Bug #14418 (Not Resolved): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- Still parts are listing twice after BOM Import. Refer screenshot(duplicate Part)
- 12:29 PM Bug #14480 (Closed): Dont display Supplier in any of the user selection part.
- 12:28 PM Bug #14658 (Closed): Supplier part number is not getting displayed in SCAR form.
- 10:38 AM Bug #14850 (Open): Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error alert is displaying
- Duplicate of #14852
- 10:36 AM Bug #14852 (Open): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- Fixed By sakthi murugan
11/06/2019
- 06:33 PM Bug #14312 (Closed): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 06:25 PM Bug #14591 (Closed): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 06:21 PM Bug #14833 (Closed): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 06:14 PM Bug #14832 (Closed): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 06:13 PM Bug #14835 (Closed): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 06:11 PM Bug #14841 (Not Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 06:06 PM Bug #14842 (Closed): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- Closed in SP915 Cycle 6
- 05:23 PM Bug #14670 (Closed): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 05:23 PM Bug #14721 (Closed): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 05:16 PM Bug #14843 (Not Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 02:30 PM Bug #14810 (Closed): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 02:21 PM Bug #14856 (Closed): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- Popup size is too small where the list is not displayed properly
- 01:46 PM Bug #14852 (Closed): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok...
- 01:14 PM Feature/Enhancement #14741: IE:User popup: when closing the popup before the page loads, throws JS error
- As per Bijoy Request this issue is moving to next Release
- 01:14 PM Feature/Enhancement #14385: User log->when session is expired system is not considering the logout time
- As per Bijoy request this issue is moving to next release
- 01:03 PM Bug #14539 (Closed): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 12:22 PM Bug #14850 (Fixed with Hotfix): Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error alert is displaying
- Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error al...
- 12:12 PM Bug #14805 (Closed): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 12:12 PM Bug #14687 (Closed): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 12:11 PM Bug #14834 (Closed): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 11:57 AM Bug #14837 (Not Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- Alert displaying - The Max length of revision number is 33
- 11:37 AM Bug #14737 (Closed): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 11:32 AM Bug #14839 (Closed): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 11:28 AM Bug #14845 (Closed): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 11:26 AM Bug #14847 (Closed): TOC: Search by document number with prefix is not working
11/05/2019
- 10:09 PM Bug #14655 (In Progress): Clicking on the attachments added in forms, shows 500 server error.
- Not able to find the root cause
- 10:08 PM Bug #14750 (Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Revision number Encoded from Docpro have to decode by All modules
- 09:02 PM Bug #14699 (Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 08:12 PM Feature/Enhancement #14413 (Open): Supplier portal module should be display in social media
- Discuss with sabu and bijoy moving to the next release
- 08:10 PM Bug #14591 (Resolved): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 07:58 PM Bug #14658 (Resolved): Supplier part number is not getting displayed in SCAR form.
- 07:50 PM Bug #14834 (Resolved): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 11:07 AM Bug #14834 (In Progress): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 07:50 PM Bug #14687 (Resolved): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 11:07 AM Bug #14687 (In Progress): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 07:48 PM Bug #14839 (Resolved): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 07:42 PM Bug #14675 (Resolved): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- 07:42 PM Bug #14742 (Resolved): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 02:08 PM Bug #14742 (Not Fixed with Hotfix): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- Cycle 5:Still issue occur in Auditee response in nxP DB
- 06:54 PM Bug #14845 (Resolved): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 03:56 PM Bug #14845 (Open): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 03:55 PM Bug #14845 (Closed): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a s...
- 06:32 PM Bug #14670 (Resolved): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 06:32 PM Bug #14721 (Resolved): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 05:24 PM Bug #14701 (Fixed with Hotfix): Auditee Response: Delete option need to remove in Evidence column
- Verified in cycle 5
- 03:11 PM Bug #14701 (Resolved): Auditee Response: Delete option need to remove in Evidence column
- 05:22 PM Bug #14837 (Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- 05:16 PM Bug #14734 (Closed): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 05:14 PM Bug #14846 (Resolved): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Not able to replicate
- 04:22 PM Bug #14846 (Open): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- 04:05 PM Bug #14846 (Closed): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Not able to attach the document itself in the ECR form when batch process is enabled - Approval is set to the Docpro ...
- 05:11 PM Bug #14847 (Resolved): TOC: Search by document number with prefix is not working
- 05:03 PM Bug #14847 (Open): TOC: Search by document number with prefix is not working
- 04:34 PM Bug #14847 (Closed): TOC: Search by document number with prefix is not working
- TOC: Search by document number with prefix is not working
- 04:54 PM Bug #14762 (Closed): Change working time is not saving- Showing Failed message
- 04:39 PM Bug #14762 (Resolved): Change working time is not saving- Showing Failed message
- 04:51 PM Bug #14737 (Resolved): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 11:44 AM Bug #14737 (Not Resolved): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 04:31 PM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 04:00 PM Bug #14843 (Open): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 02:24 PM Bug #14843 (Closed): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- • Alert must be interchanged. Issue occurs for Below also.
• System allows to drag Focus element and while drop on... - 04:31 PM Bug #14842 (Resolved): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- 03:57 PM Bug #14842 (Open): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- 01:07 PM Bug #14842 (Closed): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- While copying the Element that contains more than one child element, on same level element, diagram is displayed rand...
- 04:31 PM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:56 PM Bug #14841 (Open): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 12:48 PM Bug #14841 (Closed): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- • After minimising the level, page number remains in the same maximum as earlier structure.
• While collapsing fr... - 04:01 PM Bug #14571 (Closed): Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- Not able to attach the document itself in the ECR form when batch process is enabled - and Approval is set to the Doc...
- 03:32 PM Bug #14771 (Closed): Change Management : Document not going for approval even though route is set for the level
- Closed in CY5
- 03:00 PM Bug #14773 (Closed): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- 02:48 PM Bug #14366 (Closed): When the document name contains special character then selecting the document for the change request - No Response
- 02:41 PM Bug #14716 (Closed): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- 02:36 PM Bug #14715 (Closed): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- 02:15 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 02:15 PM Bug #14810 (Resolved): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 11:07 AM Bug #14810 (In Progress): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 02:10 PM Bug #14698 (Closed): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- Fixed
- 02:09 PM Bug #14747 (Closed): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- closed
- 02:07 PM Bug #14466 (Closed): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Verified in cycle5
- 02:07 PM Bug #14814 (Closed): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Verified
- 01:59 PM Bug #14625 (Closed): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 01:58 PM Bug #14827 (Resolved): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 01:00 PM Bug #14827 (Not Resolved): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- Refer Screenshot
- 01:56 PM Bug #14805 (Resolved): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 01:03 PM Bug #14480 (Resolved): Dont display Supplier in any of the user selection part.
- 01:01 PM Bug #14763 (Closed): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 12:41 PM Bug #14836 (Closed): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- 12:03 PM Bug #14761 (Fixed with Hotfix): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 11:53 AM Bug #14517 (Resolved): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- 11:41 AM Bug #14640 (Closed): While clicking on the supplier link from social media page the part details are showing error page.
- Fixed in the build
- 10:40 AM Bug #14640 (Resolved): While clicking on the supplier link from social media page the part details are showing error page.
- 11:40 AM Bug #14697 (Closed): Primary contact person is not added automatically for one supplier(00MagnaCosma)
- Issue closed
- 11:39 AM Bug #14826 (Fixed with Hotfix): Multi site not listing in the dropdown for APQP
- Issue fixed
- 10:11 AM Bug #14825 (Fixed with Hotfix): Group name edit is not working when tried to edit displays some invalid alert for the action done
- 10:05 AM Bug #14829 (Closed): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- Working fine after setting up business rules
- 10:04 AM Bug #14830 (Closed): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
11/04/2019
- 10:57 PM Bug #14824 (Resolved): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- 01:22 PM Bug #14824 (Open): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- 11:27 AM Bug #14824 (Closed): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- 10:57 PM Bug #14825 (Resolved): Group name edit is not working when tried to edit displays some invalid alert for the action done
- 01:22 PM Bug #14825 (Open): Group name edit is not working when tried to edit displays some invalid alert for the action done
- 11:30 AM Bug #14825 (Fixed with Hotfix): Group name edit is not working when tried to edit displays some invalid alert for the action done
- Group name edit is not working when tried to edit displays some invalid alert for the action done
- 10:56 PM Bug #14826 (Resolved): Multi site not listing in the dropdown for APQP
- 01:22 PM Bug #14826 (Open): Multi site not listing in the dropdown for APQP
- 12:09 PM Bug #14826 (Closed): Multi site not listing in the dropdown for APQP
- 1. After giving APQP module rights to Multiple sites Only corporate is showing up in the dropdown
2. If the rights s... - 09:57 PM Bug #14828 (Resolved): NC category:Irrelevant Nc category is display while raised NC .
- 06:56 PM Bug #14828 (Open): NC category:Irrelevant Nc category is display while raised NC .
- 01:54 PM Bug #14828 (Closed): NC category:Irrelevant Nc category is display while raised NC .
- NC category:Irrelevant Nc category is display while raised NC .
- 09:57 PM Bug #14829 (Resolved): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- 02:41 PM Bug #14829 (Open): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- AS discussed Not an issue
- 02:19 PM Bug #14829 (Closed): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- 09:56 PM Bug #14831 (Resolved): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- 06:56 PM Bug #14831 (Open): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- 03:36 PM Bug #14831 (Closed): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so whi...
- 09:56 PM Bug #14517 (In Progress): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- 02:15 PM Bug #14517: "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- After uploading checklists also same "Please fill business rules settings" is getting displayed
- 02:12 PM Bug #14517: "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Able to replicate in corporate site also in CY-5
- 02:11 PM Bug #14517 (Reopen): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Replicated in Cy-5
- 09:55 PM Bug #14816 (Resolved): MR approval is not working after validation and verification completed
- 05:06 PM Bug #14816 (Not Resolved): MR approval is not working after validation and verification completed
- Data not saved error message displayed when clicking on save button in close out page
- 09:55 PM Bug #14761 (Resolved): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 05:07 PM Bug #14761 (Not Resolved): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 09:31 PM Bug #14655: Clicking on the attachments added in forms, shows 500 server error.
- Reproduced in Roopa's machine. Happens in few QA machine too.
- 11:32 AM Bug #14655 (Not Resolved): Clicking on the attachments added in forms, shows 500 server error.
- 07:42 PM Bug #14827 (Resolved): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 01:22 PM Bug #14827 (Open): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 01:13 PM Bug #14827 (Closed): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and repu...
- 07:18 PM Bug #14713 (Closed): Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying declaration details(user name and job title)
- 07:18 PM Bug #14712 (Closed): IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
- 07:03 PM Bug #14436 (Closed): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 07:03 PM Bug #14832 (Resolved): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 06:56 PM Bug #14832 (Open): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 03:38 PM Bug #14832 (Closed): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- • After collapsing the subsystem element in Collapsed form and again expanding it displays arrow . While clicking on ...
- 07:03 PM Bug #14833 (Resolved): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 04:48 PM Bug #14833 (Open): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 03:46 PM Bug #14833 (Closed): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- Tooltip for Legend Icon is displayed in two different forms. - This issue occurs in all the Browsers
- 06:57 PM Bug #14839 (Open): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 05:10 PM Bug #14839 (Closed): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowi...
- 06:57 PM Bug #14837 (Open): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- 05:03 PM Bug #14837 (Closed): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" ins...
- 06:57 PM Bug #14834 (Open): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 03:48 PM Bug #14834 (Closed): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- Block Diagram: When assigning values in Show item boundaries and check Enable Automate diagram, the external element ...
- 06:11 PM Bug #14698 (Fixed with Hotfix): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- Verified in cycle5
- 06:09 PM Bug #14742 (Fixed with Hotfix): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- Verified in cycle 5
- 06:08 PM Bug #14747 (Fixed with Hotfix): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- 06:08 PM Bug #14747: NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- Verified in cycle4
- 06:08 PM Bug #14814 (Fixed with Hotfix): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 06:05 PM Bug #14814: Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Verified in Cycle5
- 06:06 PM Bug #14466 (Fixed with Hotfix): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- 06:05 PM Bug #14466: Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Verified in cycle4
- 06:04 PM Bug #14815 (Fixed with Hotfix): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- Verified in cycle5
- 05:46 PM Bug #14312 (Resolved): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 05:24 PM Bug #14727 (Closed): Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not displaying against the created One
- Verified in SP_916 CY-5
- 05:23 PM Bug #14751 (Closed): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- Issue verified in SP_916 CY-6
- 05:22 PM Bug #14734 (Resolved): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 05:16 PM Bug #14539 (In Progress): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 02:39 PM Bug #14539 (Not Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- Refer Screen Shot
- 05:14 PM Bug #14836 (Resolved): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- This is not an issue (working as per functionality)
- 05:13 PM Bug #14836 (Open): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- 04:01 PM Bug #14836 (Closed): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- When Assigning connection line and pattern value from one element to another and remove the element using Add/Remove ...
- 05:13 PM Bug #14704 (Closed): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- 05:11 PM Bug #14756 (Closed): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- Verified in Sp_915 CY-5
- 05:11 PM Bug #14770 (Closed): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- Verified in Sp_915 CY-5
- 05:10 PM Bug #14749 (Closed): LPA : Add audit activities is not displaying the latest mapped process
- Verified in Sp_915 CY-5
- 05:10 PM Bug #14561 (Closed): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- Verified in Sp_915 CY-5
- 05:09 PM Bug #14530 (Closed): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- Verified in Sp_915 CY-5
- 05:09 PM Bug #14748 (Closed): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- 05:07 PM Bug #14690 (Closed): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- 02:47 PM Bug #14690 (Resolved): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- 05:06 PM Bug #14802 (Closed): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- 05:06 PM Bug #14813 (Closed): Process/Activities : Site option is missing in process/activities
- Agree with dev team.
- 05:04 PM Bug #14685 (Closed): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- 05:04 PM Bug #14835 (Resolved): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 04:20 PM Bug #14835 (Open): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 03:51 PM Bug #14835 (Closed): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 05:03 PM Bug #14688 (Closed): HARA : Alignment is not proper in HARA Document
- 05:02 PM Bug #14688 (Resolved): HARA : Alignment is not proper in HARA Document
- 02:49 PM Bug #14688 (In Progress): HARA : Alignment is not proper in HARA Document
- 02:40 PM Bug #14688 (Open): HARA : Alignment is not proper in HARA Document
- 02:39 PM Bug #14688 (New): HARA : Alignment is not proper in HARA Document
- 02:38 PM Bug #14688 (Future Release): HARA : Alignment is not proper in HARA Document
- Very Important and Critical issues. Already informed to the dev team. Since the dev team needs to change interface it...
- 04:59 PM Bug #14677 (Closed): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 04:56 PM Bug #14705 (Closed): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- 04:55 PM Bug #14708 (Closed): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 04:54 PM Bug #14760 (Closed): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- 04:53 PM Bug #14764 (Closed): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- 04:50 PM Bug #14766 (Closed): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 04:48 PM Bug #14691 (Closed): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 04:47 PM Bug #14541 (Closed): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 04:39 PM Bug #14673 (Closed): Action:Document review:Document number link not showing the attached document, its showing some other document
- 04:27 PM Bug #14674 (Closed): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- Working fine hence closing this defect
- 04:07 PM Bug #14830 (Resolved): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- 04:07 PM Bug #14830 (Open): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- Close as per your comments
- 03:09 PM Bug #14830: Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- Working fine
- 03:05 PM Bug #14830 (Closed): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- 04:05 PM Bug #14592 (Closed): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:03 PM Bug #14678 (Closed): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 03:56 PM Bug #14803 (Closed): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- Closed in SP915 Cycle 5
- 03:55 PM Bug #14804 (Closed): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- Closed in SP915 Cycle 5
- 03:46 PM Bug #14692 (Closed): Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, page keeps on loading in chrome
- 03:24 PM Bug #14810: FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- Refer Screenshot
- 03:23 PM Bug #14810 (Not Resolved): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 03:23 PM Bug #14810 (Resolved): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 01:22 PM Bug #14810 (Open): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 03:20 PM Bug #14738 (Closed): Groups:Supplier users are listed in the groups
- 03:17 PM Bug #14672 (Closed): New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unterminated string constant" in IE and the alert displays like "Invalid or unexpected token" in chrome
- 03:14 PM Bug #14387 (Closed): Suite: First name,middle name,last name separation is not valid
- Working fine.Hence closing this defect
- 03:13 PM Bug #14817 (Closed): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- Working fine.Hence closing this defect
- 03:13 PM Bug #14818 (Closed): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- 03:13 PM Bug #14818: Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- Working fine.Hence closing this defect
- 03:13 PM Bug #14819 (Closed): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- Working fine.Hence closing this defect
- 03:12 PM Bug #14820 (Closed): Supplier Management: Repeat audit not getting generated for VAM audit
- Working fine.Hence closing this defect
- 10:07 AM Bug #14820 (Resolved): Supplier Management: Repeat audit not getting generated for VAM audit
- 10:06 AM Bug #14820 (Open): Supplier Management: Repeat audit not getting generated for VAM audit
- Shift issue
- 03:12 PM Bug #14821 (Closed): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- Working fine.Hence closing this defect
- 03:12 PM Bug #14822 (Closed): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- Working fine.Hence closing this defect
- 03:11 PM Bug #14823 (Closed): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- Working fine
- 10:05 AM Bug #14823 (Resolved): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- 10:05 AM Bug #14823 (Open): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- Issue in integrated with docpro module
- 02:51 PM Bug #14739 (Closed): P-Diagram - Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
- 02:44 PM Bug #14696 (Closed): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 02:43 PM Bug #14695 (Closed): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 02:41 PM Bug #14480 (Not Resolved): Dont display Supplier in any of the user selection part.
- Still Supplier Users are getting displayed in Deploy Goals and objectives page user selection
- 02:31 PM Bug #14687 (Not Resolved): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 02:21 PM Bug #14723 (Closed): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- 02:20 PM Bug #14658 (Open): Supplier part number is not getting displayed in SCAR form.
- 02:19 PM Bug #14658 (TBD): Supplier part number is not getting displayed in SCAR form.
- 02:20 PM Bug #14744 (Closed): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 02:17 PM Bug #14669 (Closed): In Supplier page, Clicking on the the imported supplier name shows Server error.
- 01:30 PM Bug #14689 (Closed): TOC: When clicking on Training request, shows error(only when the document name has special characters like "Document G~!@#$%^&*()_+{}"|:?><")
- 01:22 PM Bug #14805 (Open): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 01:17 PM Bug #14728 (Closed): New document request: Should not allow the user to select the level and publish document when the site is not selected(same in Document relations screen)
- 01:16 PM Bug #14729 (Closed): Activity log not showing the log details when the document is moved and reset across/within sites and moved within sites
- 01:09 PM Bug #14693 (Closed): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- Closed in SP915 Cycle 5
- 01:04 PM Bug #14694 (Closed): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- Closed in SP915 Cycle 5
- 01:04 PM Bug #14717 (Closed): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- Closed in SP915 Cycle 5
- 01:03 PM Bug #14722 (Closed): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- Closed in SP915 Cycle 5
- 01:03 PM Bug #14724 (Closed): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- Closed in SP915 Cycle 5
- 12:57 PM Bug #14746 (Closed): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- Closed in SP915 Cycle 5
- 12:51 PM Bug #14765 (Closed): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- Closed in SP915 Cycle 5
- 12:50 PM Bug #14767 (Closed): Process VDA - Delete Characteristics is not working as expected
- Closed in SP915 Cycle 5
- 12:35 PM Bug #14799 (Closed): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- This issue is fixed so closing this issue on 04.11.2019
- 12:34 PM Bug #14773 (Yet to Verify): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- 12:32 PM Bug #14551 (Closed): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- This issue is fixed so closing this issue in cycle-5 on 04.11.2019
- 12:03 PM Bug #14772 (Closed): Trade: When clicking on trade menu, it showing with loading status
- Verified and closed this issue on cycle 5
- 11:59 AM Bug #14743 (Closed): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 11:58 AM Bug #14721 (Not Resolved): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- From Concern initial evaluation page, adding attachment and clicking on save has the same behavior
- 11:52 AM Bug #14676 (Closed): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- 11:41 AM Bug #14533 (Closed): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- Closed in Cycle5
- 11:40 AM Bug #14681 (Closed): Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is Attach rights and View History
- Closed in Cycle5
- 11:26 AM Bug #14670 (Not Resolved): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 11:16 AM Bug #14400 (Closed): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
11/03/2019
- 05:03 PM Bug #14818 (Resolved): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- WAD
- 05:02 PM Bug #14818 (Open): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- Already other user assigned level for supplier . Find Screenshot
- 02:59 PM Bug #14818 (Closed): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- Supplier management->Business rules->Level set up in audit pro is reflectd in supplier management business rules leve...
- 04:07 PM Bug #14817 (Resolved): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- 04:07 PM Bug #14817 (Open): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- This issue is already in 9.1.2
- 02:58 PM Bug #14817 (Closed): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- 03:58 PM Bug #14819 (Resolved): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- 03:58 PM Bug #14819 (Open): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- Issue
- 03:00 PM Bug #14819 (Closed): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to aud...
- 03:51 PM Bug #14821 (Resolved): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- 03:51 PM Bug #14821 (Open): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- Not an issue. WAD
- 03:03 PM Bug #14821 (Closed): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map enti...
- 03:39 PM Bug #14822 (Resolved): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- 03:38 PM Bug #14822 (Open): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- Not an issue.WAD
- 03:04 PM Bug #14822 (Closed): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- 03:07 PM Bug #14823 (Closed): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local mac...
- 03:05 PM Bug #14675 (Not Resolved): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- Able to replicate in CY-5
- 03:01 PM Bug #14820 (Closed): Supplier Management: Repeat audit not getting generated for VAM audit
- Supplier Management: Repeat audit not getting generated for VAM audit
- 12:08 PM Bug #14771 (Resolved): Change Management : Document not going for approval even though route is set for the level
- 12:08 PM Bug #14366 (Resolved): When the document name contains special character then selecting the document for the change request - No Response
- 12:08 PM Bug #14699: When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- There is an issue populating from Form service (Error in saving file in DB) even though change management sends an al...
11/02/2019
- 07:10 PM Bug #14815 (Resolved): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- Fixed for Effectiveness holiday calculation. Rest we don't have any changes
- 02:08 PM Bug #14815 (In Progress): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- 02:07 PM Bug #14815 (Open): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- 07:42 AM Bug #14815 (Closed): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- Audito/Auditee:Holiday should count during calculate the response target date,closed out date and effectiveness date
- 06:49 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:46 PM Bug #14592 (Not Fixed with Hotfix): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 02:23 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 06:49 PM Bug #14804 (Resolved): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- 06:49 PM Bug #14804 (Open): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- 06:41 PM Bug #14764 (Resolved): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- 06:41 PM Bug #14760 (Resolved): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- 06:41 PM Bug #14705 (Resolved): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- 06:41 PM Bug #14704 (Resolved): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- 06:38 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 06:38 PM Bug #14687 (Resolved): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 06:38 PM Bug #14685 (Resolved): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- 06:37 PM Bug #14723 (Resolved): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- 06:37 PM Bug #14744 (Resolved): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 06:01 PM Bug #14738 (Resolved): Groups:Supplier users are listed in the groups
- 06:00 PM Bug #14813 (Resolved): Process/Activities : Site option is missing in process/activities
- This is not an issue..Please check the "Is Process Site Specific" checkbox in Administrator settings page to show the...
- 05:41 PM Bug #14766 (Yet to Verify): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:40 PM Bug #14766 (Resolved): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:18 PM Bug #14766 (Not Fixed with Hotfix): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:24 PM Bug #14724 (Fixed with Hotfix): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 05:19 PM Bug #14767 (Yet to Verify): Process VDA - Delete Characteristics is not working as expected
- 05:17 PM Bug #14694 (Yet to Verify): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 05:14 PM Bug #14694 (Resolved): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 04:54 PM Bug #14694 (Not Fixed with Hotfix): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 05:16 PM Bug #14799 (Yet to Verify): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 05:15 PM Bug #14799 (Resolved): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 02:53 PM Bug #14799 (Not Fixed with Hotfix): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 05:01 PM Bug #14541 (Fixed with Hotfix): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 04:56 PM Bug #14691 (Fixed with Hotfix): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 04:55 PM Bug #14693 (Fixed with Hotfix): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 04:53 PM Bug #14722 (Fixed with Hotfix): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 04:53 PM Bug #14746 (Fixed with Hotfix): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 04:53 PM Bug #14765 (Fixed with Hotfix): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- 02:23 PM Bug #14765 (Resolved): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- 04:45 PM Bug #14814 (Resolved): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Refer the screen shot
- 02:07 PM Bug #14814 (In Progress): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 04:43 PM Bug #14678 (Fixed with Hotfix): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 04:39 PM Bug #14717 (Fixed with Hotfix): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 02:50 PM Bug #14803 (Fixed with Hotfix): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- 02:22 PM Bug #14803 (Resolved): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- 02:22 PM Bug #14803 (Open): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- 02:16 PM Bug #14655 (Resolved): Clicking on the attachments added in forms, shows 500 server error.
- Verified. Working as expected
- 02:08 PM Bug #14816 (Resolved): MR approval is not working after validation and verification completed
- 02:07 PM Bug #14816 (Open): MR approval is not working after validation and verification completed
- 09:11 AM Bug #14816 (Closed): MR approval is not working after validation and verification completed
- Bussiness Rule: MR approval is not working after validation and verification completed
- 02:07 PM Bug #14466 (Resolved): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- 08:02 AM Bug #14466 (Reopen): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Still the issue occur in cycle 4.Reopening this issue
- 02:06 PM Bug #14698 (Resolved): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- 02:02 PM Bug #14742 (Resolved): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 11:29 AM Bug #14669 (Resolved): In Supplier page, Clicking on the the imported supplier name shows Server error.
- 11:28 AM Bug #14676 (Resolved): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- 11:28 AM Bug #14400 (Resolved): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 09:22 AM Bug #14773 (Resolved): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
11/01/2019
- 08:43 PM Bug #14806 (Resolved): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- 05:40 PM Bug #14806 (Open): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- 04:59 PM Bug #14806 (Closed): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact perso...
- 08:43 PM Bug #14366: When the document name contains special character then selecting the document for the change request - No Response
- We have encoded the string and change management needs to decode the string. Docpro change done change management cod...
- 08:42 PM Bug #14813 (Open): Process/Activities : Site option is missing in process/activities
- 06:19 PM Bug #14813 (Closed): Process/Activities : Site option is missing in process/activities
- Process/Activities : Site option is missing in process/activities
- 08:42 PM Bug #14814 (Open): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 06:48 PM Bug #14814 (Closed): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 08:41 PM Bug #14751 (Resolved): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- 09:18 AM Bug #14751 (Open): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- 08:41 PM Bug #14533 (Resolved): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 08:40 PM Bug #14625 (Resolved): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 06:15 PM Bug #14625 (Not Resolved): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 08:38 PM Bug #14655: Clicking on the attachments added in forms, shows 500 server error.
- Please provide details to replicate the issue
- 07:57 PM Bug #14695 (Resolved): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 06:16 PM Bug #14695 (Not Fixed with Hotfix): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- Still facing the same issue
- 09:51 AM Bug #14695 (Resolved): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 09:18 AM Bug #14695 (Open): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 07:57 PM Bug #14696 (Resolved): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 06:16 PM Bug #14696 (Not Fixed with Hotfix): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- It is not fixed in Training request from Doc Pro
- 01:15 PM Bug #14696 (Resolved): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 09:18 AM Bug #14696 (Open): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 07:43 PM Bug #14799 (Resolved): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 03:02 PM Bug #14799 (Open): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 02:36 PM Bug #14799 (Closed): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- In the Structure Analysis, by doing the Right-Click activity on the displayed Arrow Connection its displaying JS Erro...
- 06:52 PM Bug #14708 (Resolved): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 04:00 PM Bug #14708 (In Progress): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 06:42 PM Bug #14717 (Resolved): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 03:35 PM Bug #14717 (In Progress): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 09:18 AM Bug #14717 (Open): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 06:42 PM Bug #14767 (Resolved): Process VDA - Delete Characteristics is not working as expected
- 09:18 AM Bug #14767 (Open): Process VDA - Delete Characteristics is not working as expected
- 06:33 PM Bug #14750: Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Also for the attached documents from docpro the document name is showing "%20" instead of blank space -> Fixed.
- 09:18 AM Bug #14750 (Open): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- 06:16 PM Bug #14763 (Fixed with Hotfix): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 04:18 PM Bug #14763 (Resolved): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 09:18 AM Bug #14763 (Open): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 06:07 PM Bug #14772 (Resolved): Trade: When clicking on trade menu, it showing with loading status
- 03:02 PM Bug #14772 (Open): Trade: When clicking on trade menu, it showing with loading status
- 11:34 AM Bug #14772 (Closed): Trade: When clicking on trade menu, it showing with loading status
- Trade: When clicking on trade menu, it showing with loading status.
The predefined status is not displayed - 05:56 PM Bug #14541 (Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 05:55 PM Bug #14691 (Resolved): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 05:55 PM Bug #14693 (Resolved): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 05:55 PM Bug #14694 (Resolved): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 05:54 PM Bug #14722 (Resolved): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 05:53 PM Bug #14724 (Resolved): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 11:06 AM Bug #14724 (In Progress): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 05:52 PM Bug #14746 (Resolved): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 11:04 AM Bug #14746 (In Progress): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 05:42 PM Bug #14802 (Resolved): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- As per the discussion with QA, It's not an Issue
- 05:40 PM Bug #14802 (Open): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- 03:41 PM Bug #14802 (Closed): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- 05:41 PM Bug #14678 (Resolved): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 05:31 PM Bug #14810 (Closed): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- In FSR at top left corner when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
Re... - 05:29 PM Bug #14766 (Resolved): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:22 PM Bug #14756 (Resolved): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- Not able to replicate checked with QA
- 09:18 AM Bug #14756 (Open): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- 05:09 PM Bug #14551 (Fixed with Hotfix): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- 04:22 PM Bug #14551 (Resolved): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- Fixed and patches ready for hotfix testing
- 04:54 PM Bug #14365 (Closed): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 04:41 PM Bug #14365 (Resolved): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 04:19 PM Bug #14748 (Resolved): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- 09:18 AM Bug #14748 (Open): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- 04:00 PM Bug #14686 (Closed): Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- unable to replicate.hence closing this defect
- 03:58 PM Bug #14805 (Closed): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- Search Option is not Working in Below document
>VOC
>Functional Analysis
>Hazard and Risk Analysis and
>TSR - 03:58 PM Bug #14804 (Closed): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- 03:50 PM Bug #14721 (Resolved): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 09:18 AM Bug #14721 (Open): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 03:45 PM Bug #14560 (Closed): PDF disable: When viewing the deleted document from actions, shows error
- closed in cy4
- 03:44 PM Bug #14803 (Closed): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- While collapsing the element which is already in expanded form and again expanding it, arrow is not displayed.
- 03:21 PM Bug #14764: EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- When two or more functions are added, the header is displayed for each function
- 09:18 AM Bug #14764 (Open): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- 03:02 PM Bug #14771 (Open): Change Management : Document not going for approval even though route is set for the level
- 11:24 AM Bug #14771 (Closed): Change Management : Document not going for approval even though route is set for the level
- Change Management : Document not going for approval even though route is set for the level
Also current revision n... - 03:02 PM Bug #14773 (Open): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- 11:37 AM Bug #14773 (Closed): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- TOC: Revision history summary: Print Icon is not displayed for the supported file type. Print icon is displayed for P...
- 02:52 PM Bug #14383 (Closed): Search is not working in Widget settings either by using search window or else through search grid
- 02:51 PM Bug #14436 (Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 02:44 PM Bug #14418 (Resolved): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- 01:20 PM Bug #14674 (Resolved): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- 01:17 PM Bug #14558 (Closed): In Edge browser - ECR number is shown as link
- 01:08 PM Bug #14770 (Resolved): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- 01:07 PM Bug #14770 (Open): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- 10:15 AM Bug #14770 (Closed): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully...
- 12:11 PM Bug #14737 (Resolved): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 09:18 AM Bug #14737 (Open): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 12:10 PM Bug #14677 (Resolved): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 11:17 AM Bug #14716 (Resolved): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- 09:18 AM Bug #14716 (Open): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- 11:17 AM Bug #14715 (Resolved): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- 09:18 AM Bug #14715 (Open): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- 10:49 AM Bug #14743 (Resolved): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 09:18 AM Bug #14743 (Open): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 10:02 AM Bug #14480 (Resolved): Dont display Supplier in any of the user selection part.
- 09:55 AM Bug #14557 (Closed): After Rejecting the ECR form - it shows alert- Already rejected.
- 09:18 AM Bug #14765 (Open): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- 09:18 AM Bug #14762 (Open): Change working time is not saving- Showing Failed message
- 09:18 AM Bug #14760 (Open): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- 09:18 AM Bug #14744 (Open): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 09:18 AM Bug #14742 (Open): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 09:18 AM Feature/Enhancement #14741 (Open): IE:User popup: when closing the popup before the page loads, throws JS error
- 09:18 AM Bug #14739 (Open): P-Diagram - Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
- 09:18 AM Bug #14738 (Open): Groups:Supplier users are listed in the groups
- 09:18 AM Bug #14734 (Open): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 09:18 AM Bug #14726 (Open): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- 09:18 AM Bug #14723 (Open): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- 09:18 AM Feature/Enhancement #14720 (Open): The "customize email messages" and business rules in Supplier PPAP is not yet module specific
- 09:18 AM Bug #14713 (Open): Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying declaration details(user name and job title)
- 09:18 AM Bug #14712 (Open): IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
10/31/2019
- 09:40 PM Bug #14766 (In Progress): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 07:42 PM Bug #14766 (Open): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 06:00 PM Bug #14766 (Closed): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- While deleting a failure in one block system is deleting the failure in the other block.
- 07:08 PM Bug #14761 (Resolved): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 06:20 PM Bug #14761 (Open): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 05:31 PM Bug #14761 (Closed): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated
- 06:39 PM Bug #14436 (Not Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 06:39 PM Bug #14436: Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- if Effectiveness is "no", Data need to display,if Effectiveness is "no".
It should show the current status. - 06:34 PM Bug #14571 (Resolved): Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- 06:16 PM Bug #14360 (Closed): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 05:08 PM Bug #14360 (Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 04:03 PM Bug #14360 (Not Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 04:02 PM Bug #14360: Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- Default status should not be as not verified.Kindly remove it.
- 06:08 PM Bug #14675 (Resolved): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- 06:08 PM Bug #14343 (Closed): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- 06:08 PM Bug #14670 (Resolved): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 06:06 PM Bug #14383 (Not Resolved): Search is not working in Widget settings either by using search window or else through search grid
- 06:05 PM Bug #14767 (Closed): Process VDA - Delete Characteristics is not working as expected
- Delete Characteristics is not working before deleting Failure.
- 06:04 PM Bug #14365 (Not Resolved): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 06:00 PM Bug #14630 (Closed): Report : Findings report->Bench mark field does not display frequently modified data
- 06:00 PM Bug #14630: Report : Findings report->Bench mark field does not display frequently modified data
- Verified in report also in cycle 4
- 05:57 PM Suggestion #14364 (Closed): Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- 05:53 PM Feature/Enhancement #14413 (Not Resolved): Supplier portal module should be display in social media
- Administration setting is set to social media as per Raghu Ram comment but still activities soes not displays "Suppli...
- 05:48 PM Bug #14404 (Closed): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 05:47 PM Bug #14765 (Closed): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- Issue occurs while adding Characteristics/Effect/Failure/Cause, before adding Process Item Function and Work Element ...
- 05:45 PM Bug #14764 (Closed): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- In EFC tree the Element is displayed isolated without any interline connection and the function/requirement displayed...
- 05:43 PM Bug #14376 (Closed): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 05:39 PM Bug #14617 (Closed): Master folder tag allows to save duplicate data
- 05:34 PM Bug #14763 (Closed): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- If the user tries to create training request from Doc Pro, if the Document name is having special character then the ...
- 05:32 PM Bug #14762 (Closed): Change working time is not saving- Showing Failed message
- Change working time is not saving- Showing Failed message
- 05:12 PM Bug #14432 (Closed): Findings Report ->Benchmark data is not displayed in Findings Reports.
- verified in cycle 4
- 05:08 PM Bug #14714 (Closed): Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- 05:08 PM Bug #14714: Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- Not able replicate, closing this isue
- 05:00 PM Bug #14714 (Resolved): Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- 04:53 PM Bug #14760 (Closed): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- While opening one tree diagram to another tree diagram using context menu by right click, the maximize button is not ...
- 04:43 PM Bug #14320: Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:42 PM Bug #14576: Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:42 PM Bug #14579: Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:41 PM Bug #14585: Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:41 PM Bug #14603: Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:41 PM Bug #14623: Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:41 PM Bug #14628: Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:40 PM Bug #14726: Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 12:04 PM Bug #14726 (Closed): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- Edit Effect option is listed in Functional Analysis Context menu
- 04:40 PM Bug #14353 (Closed): Email for Effectiveness For Findings -> Email subject is wrong.
- Verified in cycle 4
- 04:35 PM Bug #14541 (Not Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- Edit Characteristics is reflected only in Tree/Table view.
- 04:34 PM Bug #14561 (Resolved): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- Not an issue. Kindly check both the status.
- 03:53 PM Bug #14561 (Not Resolved): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 04:25 PM Bug #14530 (Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- working as expected. Check ML-010. Newly created Manufacturing Line
- 03:48 PM Bug #14530 (Not Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- I have created a new manufacturing line but does not show up
- 01:19 PM Bug #14530 (Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- Create New manufacturing line and Verify
- 12:42 PM Bug #14530 (Not Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- Now Manufacturing line itself is not listing thought checklist is assigned in LPA schedule screen
- 04:25 PM Bug #14724 (Open): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 11:58 AM Bug #14724 (Closed): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- Mozilla - Context menu for following pages are not good.
• Process VDA - Functional/Failure Analysis
• Design VD... - 04:24 PM Bug #14746 (Open): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 03:02 PM Bug #14746 (Closed): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- Legend icon for Flow Down/Up Indicator is not good
- 04:06 PM Bug #14747 (Resolved): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- 04:05 PM Bug #14747 (Open): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- 03:18 PM Bug #14747 (Closed): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that...
- 04:04 PM Bug #14756 (Closed): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- 04:01 PM Bug #14749 (Resolved): LPA : Add audit activities is not displaying the latest mapped process
- 04:00 PM Bug #14749 (Open): LPA : Add audit activities is not displaying the latest mapped process
- 03:19 PM Bug #14749 (Closed): LPA : Add audit activities is not displaying the latest mapped process
- dd audit activities is not displaying the latest mapped process
- 03:55 PM Bug #14359 (Closed): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 03:51 PM Bug #14359 (Fixed with Hotfix): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- Verified in cycle 4
- 03:54 PM Bug #14363 (Closed): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 03:53 PM Bug #14562 (Closed): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 03:46 PM Bug #14322 (Closed): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 03:42 PM Bug #14693 (In Progress): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 03:36 PM Bug #14308 (Closed): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 03:36 PM Bug #14308: Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- Verified in cycle 4
- 03:35 PM Bug #14686: Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- WAD
- 12:34 PM Bug #14686 (Resolved): Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- 03:34 PM Bug #14751 (Closed): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be...
- 03:34 PM Bug #14750 (Not Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Not able to attach docpro document in meetings by selecting revision document from custom /user defined folder
Also ... - 03:18 PM Bug #14748 (Closed): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- Attach the Profile Picture for the first user and Save using "Save and Add"
create a Second user and Click Save b... - 03:16 PM Bug #14727 (Resolved): Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not displaying against the created One
- 03:15 PM Bug #14727 (Open): Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not displaying against the created One
- 12:05 PM Bug #14727 (Closed): Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not displaying against the created One
- Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not disp...
- 03:09 PM Bug #14662 (Closed): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- 03:07 PM Bug #14672 (Resolved): New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unterminated string constant" in IE and the alert displays like "Invalid or unexpected token" in chrome
- 03:06 PM Bug #14681 (Resolved): Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is Attach rights and View History
- 03:06 PM Bug #14689 (Resolved): TOC: When clicking on Training request, shows error(only when the document name has special characters like "Document G~!@#$%^&*()_+{}"|:?><")
- 03:04 PM Bug #14673 (Resolved): Action:Document review:Document number link not showing the attached document, its showing some other document
- 03:02 PM Bug #14692 (Resolved): Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, page keeps on loading in chrome
- 02:59 PM Bug #14728 (Resolved): New document request: Should not allow the user to select the level and publish document when the site is not selected(same in Document relations screen)
- 02:58 PM Bug #14728 (Open): New document request: Should not allow the user to select the level and publish document when the site is not selected(same in Document relations screen)
- 12:07 PM Bug #14728 (Closed): New document request: Should not allow the user to select the level and publish document when the site is not selected(same in Document relations screen)
- New document request: Should not allow the user to select the level when the site is not selected
- 02:58 PM Bug #14729 (Resolved): Activity log not showing the log details when the document is moved and reset across/within sites and moved within sites
- cannot replicate
- 02:58 PM Bug #14729 (Open): Activity log not showing the log details when the document is moved and reset across/within sites and moved within sites
- 12:26 PM Bug #14729 (Closed): Activity log not showing the log details when the document is moved and reset across/within sites and moved within sites
- Activity log not showing the log details when the document is moved across/within sites
- 02:56 PM Bug #14691 (In Progress): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 02:54 PM Bug #14678 (In Progress): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 02:48 PM Bug #14744 (Closed): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple...
- 02:45 PM Bug #14743 (Closed): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 02:44 PM Bug #14742 (Closed): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- Auditee Response: Not able to enter the data in Root cause description fields
- 02:39 PM Feature/Enhancement #14741 (Open): IE:User popup: when closing the popup before the page loads, throws JS error
- IE:User popup: when closing the popup before the page loads, throws JS error
- 02:35 PM Bug #14739 (Closed): P-Diagram - Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
- Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
Refer Screenshot - 02:32 PM Bug #14738 (Closed): Groups:Supplier users are listed in the groups
- Groups:Supplier users are listed in the groups
- 02:28 PM Bug #14694 (In Progress): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 02:27 PM Bug #14581: Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- Sabu insist to Close the issue
- 02:26 PM Bug #14581 (Closed): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- 01:49 PM Bug #14581 (Resolved): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- 11:56 AM Bug #14581 (Not Resolved): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- Document owner and Document level is not listed
- 02:26 PM Bug #14481 (Closed): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 02:25 PM Bug #14737 (Closed): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 02:20 PM Bug #14722 (In Progress): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 01:55 PM Bug #14722 (Open): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 11:51 AM Bug #14722 (Closed): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- While clicking any item in LHS and RHS views, system removes the Topic segment from the header. On reloading it is di...
- 02:05 PM Bug #14456 (Closed): Reports: In the PI field its displaying the PI name as 2 times
- 02:05 PM Bug #14454 (Closed): Reports: Reports is not displaying as User Specific
- Working as Expected
- 01:13 PM Bug #14454 (Resolved): Reports: Reports is not displaying as User Specific
- 02:02 PM Bug #14734 (Closed): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 01:03 PM Bug #14536 (Closed): LPA : Auditor and Auditee availability email is not generating
- 12:57 PM Bug #14312 (Reopen): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- Except IE browser it is not fixed
- 12:51 PM Bug #14697 (Resolved): Primary contact person is not added automatically for one supplier(00MagnaCosma)
- 12:50 PM Bug #14428 (Closed): LPA :Holiday alert is not displayed when selected the day which is holiday
- 12:24 PM Bug #14351 (Closed): Report : Final Inspection and Capture History reports are not opening
- Closed in Cy4
- 12:10 PM Bug #14626 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Replicate issue
- 12:02 PM Bug #14658 (Yet to Verify): Supplier part number is not getting displayed in SCAR form.
- 12:00 PM Bug #14315 (Closed): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 11:56 AM Bug #14723 (Closed): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
It creates two fie... - 11:51 AM Bug #14721 (Closed): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is...
- 11:49 AM Feature/Enhancement #14720 (Open): The "customize email messages" and business rules in Supplier PPAP is not yet module specific
- Clicking on "customize email messages" showing Sorry, an error occurred while processing your request.
Discussed al... - 11:11 AM Bug #14625 (Yet to Verify): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 11:04 AM Bug #14717 (Closed): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- While click on one field, system focuses on the concurrent field also.
- 10:58 AM Bug #14716 (Closed): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- Change Management : When the change request is initiated from suite and publishing it from Change request status then...
- 10:45 AM Bug #14715 (Closed): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Defa...
- 10:33 AM Bug #14519 (Closed): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- Verified and closed this issue
10/30/2019
- 07:35 PM Bug #14662 (Resolved): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- 07:35 PM Bug #14630 (Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- 07:35 PM Bug #14626 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 07:35 PM Bug #14562 (Resolved): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 07:35 PM Bug #14561 (Resolved): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 07:35 PM Bug #14541 (Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 03:53 PM Bug #14541: Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- Edited Characteristics is displayed for other operation above the existing block.
- 07:35 PM Bug #14536 (Resolved): LPA : Auditor and Auditee availability email is not generating
- 07:35 PM Bug #14530 (Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 07:35 PM Bug #14519 (Resolved): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- 07:35 PM Bug #14432 (Resolved): Findings Report ->Benchmark data is not displayed in Findings Reports.
- 07:35 PM Bug #14428 (Resolved): LPA :Holiday alert is not displayed when selected the day which is holiday
- 07:35 PM Bug #14404 (Resolved): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 07:35 PM Bug #14387 (Resolved): Suite: First name,middle name,last name separation is not valid
- 07:35 PM Bug #14363 (Resolved): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 07:35 PM Bug #14360 (Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 07:35 PM Bug #14359 (Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 07:35 PM Bug #14353 (Resolved): Email for Effectiveness For Findings -> Email subject is wrong.
- 07:35 PM Bug #14351 (Resolved): Report : Final Inspection and Capture History reports are not opening
- 07:35 PM Bug #14308 (Resolved): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 07:32 PM Bug #14699 (Open): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 05:23 PM Bug #14699 (Closed): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- When the document is drag and dropped or attached twice for the any change initiated document then it takes both the ...
- 07:31 PM Suggestion #14702 (Open): Alert updation while selecting template via charter/Bom or add supplier option
- 05:33 PM Suggestion #14702 (Open): Alert updation while selecting template via charter/Bom or add supplier option
- While creating a program by selecting both charter template and BOM/supplier template getting alert "You have select...
- 07:31 PM Bug #14714 (Open): Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- 07:08 PM Bug #14714 (Closed): Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in A...
- 07:31 PM Bug #14685 (Open): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- 03:16 PM Bug #14685 (Closed): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- When we select particular elements in Add/Remove elements or while we select the context element as focus element it ...
- 07:30 PM Bug #14687 (Open): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 03:47 PM Bug #14687 (Closed): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- Internal element for parent is displayed outside the Block diagram
When we drag the internal element inside the P... - 07:30 PM Bug #14688 (Open): HARA : Alignment is not proper in HARA Document
- 03:54 PM Bug #14688 (Closed): HARA : Alignment is not proper in HARA Document
- Alignment is not good in HARA Document
Refer Screenshot - 07:30 PM Bug #14690 (Open): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- 04:06 PM Bug #14690 (Closed): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- The Indicators are not displayed in Flow Indicator Details for all Tree diagrams and in VOC
Refer Screenshot - 07:29 PM Bug #14704 (Open): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- 05:40 PM Bug #14704 (Closed): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each ...
- 06:51 PM Bug #14705 (Open): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- 05:43 PM Bug #14705 (Closed): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
Refer Screenshot - 06:50 PM Bug #14708 (Open): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 05:53 PM Bug #14708 (Closed): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- Failure Tree Diagram: At the Right Top Corner the Indicator Details are hidden in Failure tree diagram
Refer Scree... - 06:46 PM Bug #14673 (Open): Action:Document review:Document number link not showing the attached document, its showing some other document
- 12:37 PM Bug #14673 (Closed): Action:Document review:Document number link not showing the attached document, its showing some other document
- Action:Document review:Document number link not showing the attached document, its showing some other document
- 06:46 PM Bug #14689 (Open): TOC: When clicking on Training request, shows error(only when the document name has special characters like "Document G~!@#$%^&*()_+{}"|:?><")
- 04:04 PM Bug #14689 (Closed): TOC: When clicking on Training request, shows error(only when the document name has special characters like "Document G~!@#$%^&*()_+{}"|:?><")
- TOC: When clicking on Training request, shows error
- 06:46 PM Bug #14692 (Open): Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, page keeps on loading in chrome
- 04:07 PM Bug #14692 (Closed): Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, page keeps on loading in chrome
- Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, ...
- 06:45 PM Bug #14694 (Open): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 04:26 PM Bug #14694 (Closed): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- Context menu label for Delete Failure displays THL
- 06:45 PM Bug #14693 (Open): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 04:09 PM Bug #14693 (Closed): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- Delete characteristics is displaying JS error
- 06:45 PM Bug #14691 (Open): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 04:07 PM Bug #14691 (Closed): Process VDA - Functional Analysis - Edit Characteristics is not working.
- Edited Characteristics are not reflected anywhere.
- 06:45 PM Bug #14678 (Open): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 02:26 PM Bug #14678 (Closed): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- After deleting a requirement, system displays only the Function of the Deleted requirement without displaying all oth...
- 06:39 PM Bug #14698 (Open): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- 05:22 PM Bug #14698 (Closed): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- Auditee Response: It should allow to upload the file which has special character in Evidence attachment
1) Login a... - 06:38 PM Bug #14701 (Open): Auditee Response: Delete option need to remove in Evidence column
- 05:31 PM Bug #14701 (Closed): Auditee Response: Delete option need to remove in Evidence column
- Auditee Response: Delete option need to remove.
- 06:36 PM Bug #14674 (Open): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- 12:38 PM Bug #14674 (Closed): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- 06:36 PM Bug #14686 (Open): Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- 03:37 PM Bug #14686 (Closed): Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in ...
- 06:35 PM Bug #14697 (Open): Primary contact person is not added automatically for one supplier(00MagnaCosma)
- 05:22 PM Bug #14697 (Closed): Primary contact person is not added automatically for one supplier(00MagnaCosma)
- Primary contact person is not added automatically for one supplier(00MagnaCosma)
- 06:32 PM Bug #14628 (Open): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 06:32 PM Bug #14628 (New): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 06:32 PM Bug #14623 (Open): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 06:32 PM Bug #14623 (New): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 06:32 PM Bug #14603 (Open): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 06:32 PM Bug #14603 (New): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 06:32 PM Bug #14585 (Open): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 06:32 PM Bug #14585 (New): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 06:32 PM Bug #14579 (Open): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 06:32 PM Bug #14579 (New): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 06:32 PM Bug #14576 (Open): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 06:32 PM Bug #14576 (New): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 06:32 PM Bug #14320 (Open): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 06:12 PM Bug #14320 (New): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 05:10 PM Bug #14320 (Not Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 03:10 PM Bug #14320 (Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 06:20 PM Bug #14250 (Closed): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- Verified inc cycle 4
- 06:18 PM Bug #14421 (Closed): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 06:16 PM Bug #14294 (Closed): While approving the respective action in approver login displays dual window after approver
- 06:16 PM Bug #14294: While approving the respective action in approver login displays dual window after approver
- Verified in Cycle 4
- 06:16 PM Bug #14515 (Closed): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- working fine
- 06:15 PM Bug #14518 (Closed): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- working fine
- 06:15 PM Bug #14713 (Closed): Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying declaration details(user name and job title)
- Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying decl...
- 06:09 PM Bug #14712 (Closed): IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
- IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
- 06:09 PM Bug #14096 (Closed): Click to view report is not displaying audit status and audit date
- Verified in cycle4
- 06:07 PM Bug #14615 (Closed): Process VDA: Search functionality is not working
- 06:07 PM Bug #14526 (Closed): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 06:06 PM Bug #14550 (Closed): Remarks/Objective Evidence field does not display entered data when retrieved
- 06:06 PM Bug #14550: Remarks/Objective Evidence field does not display entered data when retrieved
- Verified in Cycle 4
- 05:55 PM Bug #14298 (Closed): Process VDA - There is no option to add Severity for the added Effect.
- 05:49 PM Bug #14350 (Closed): NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clciking on "Submit to auditee" button
- Verified in cycle 4
- 05:43 PM Bug #14382 (Closed): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- 05:42 PM Bug #14461 (Yet to Verify): Assign Checklist-> Max and min button need to displayed in assign checklist page
- Need discuss with bijoy
- 05:38 PM Bug #14634 (Closed): In APQP Mail - Site URL and Document URL not displayed fully.
- 05:36 PM Bug #14663 (Closed): Archive a project created via Import Excel option and check under Archived project list the project is missing
- 05:36 PM Bug #14663 (Fixed with Hotfix): Archive a project created via Import Excel option and check under Archived project list the project is missing
- Closed in Build itself
- 05:25 PM Bug #14663 (Open): Archive a project created via Import Excel option and check under Archived project list the project is missing
- 05:36 PM Bug #14672 (Open): New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unterminated string constant" in IE and the alert displays like "Invalid or unexpected token" in chrome
- 12:32 PM Bug #14672 (Closed): New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unterminated string constant" in IE and the alert displays like "Invalid or unexpected token" in chrome
- New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unte...
- 05:35 PM Bug #14677 (Open): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 01:11 PM Bug #14677 (Closed): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 05:28 PM Bug #14284 (Closed): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- 05:28 PM Bug #14514 (Closed): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- 05:27 PM Bug #14380 (Closed): The document viewer publish is not working getting object reference not set error
- 05:26 PM Bug #14524 (Closed): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- 05:26 PM Bug #14527 (Closed): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- 05:26 PM Bug #14643 (Closed): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- 05:26 PM Bug #14651 (Closed): Allowing to add multiple suppliers in a project via Add supplier button
- 05:25 PM Bug #14596 (Closed): The buttons in the meetings page is showing as disabled( Issue with Supplier PPAP only)
- 05:25 PM Bug #14676 (Open): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- 12:56 PM Bug #14676 (Closed): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated. After creating a nested con...
- 05:25 PM Bug #14675 (Open): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- 12:42 PM Bug #14675 (Closed): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able...
- 05:25 PM Bug #14670 (Open): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 11:55 AM Bug #14670 (Closed): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 05:25 PM Bug #14669 (Open): In Supplier page, Clicking on the the imported supplier name shows Server error.
- 11:36 AM Bug #14669 (Closed): In Supplier page, Clicking on the the imported supplier name shows Server error.
- In Supplier page, Clicking on the the imported supplier name shows Server error.
- 05:22 PM Bug #14302 (Closed): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 05:15 PM Bug #14696 (Closed): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- New training request->Training required date->unable to open a calendar to pick a date
- 05:09 PM Bug #14390 (Closed): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 05:09 PM Bug #14565 (Closed): change Management: In the Add Document Tree Level the draft is listed.
- 05:08 PM Bug #14564 (Closed): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 05:00 PM Bug #14695 (Closed): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- Improper alert is getting displayed if no rating value is specified only rating description has entered
- 04:57 PM Bug #14513 (Closed): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- 04:56 PM Bug #14528 (Closed): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 04:55 PM Bug #14480 (Reopen): Dont display Supplier in any of the user selection part.
- Still Supplier Users are getting displayed in Productivity Gain menu, Name dropdown
- 04:49 PM Bug #14584 (Closed): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 04:49 PM Bug #14523 (Closed): Action Management: Action name is displaying twice.
- 04:49 PM Bug #14266 (Closed): Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- 04:30 PM Bug #14522 (Closed): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 04:27 PM Bug #14537 (Closed): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 04:17 PM Bug #14525 (Closed): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- 04:16 PM Bug #14570 (Closed): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 04:10 PM Bug #14538 (Closed): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 04:02 PM Bug #14540 (Closed): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 04:00 PM Bug #14457 (Closed): Multi site->Audit program: Remove this alert message for clause in multi site
- Verified in Cycle 4
- 03:59 PM Bug #14452 (Closed): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 03:46 PM Bug #14533 (Not Fixed with Hotfix): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 03:41 PM Bug #14582 (Closed): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- 03:41 PM Bug #14600 (Closed): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- 03:36 PM Bug #14543 (Closed): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- Closed in SP915 Cycle 4
- 03:34 PM Bug #14544 (Closed): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 03:19 PM Bug #14548 (Closed): Process VDA - Topic segment is not changed even after changing the Production Item
- Closed in SP915 Cycle 4
- 03:18 PM Bug #14554 (Closed): Document name with special character and custom revision not working as expected.
- Clicking on document name with the custom revision number - showing alert - Revision not available.--- - Issue closed...
- 03:17 PM Bug #14552 (Closed): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- Closed in SP915 Cycle 4
- 03:15 PM Bug #14553 (Closed): Design and Process VDA - Percentage allocation displays 7th Step
- Closed in SP915 Cycle 4
- 03:15 PM Bug #14556 (Closed): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- Closed in SP915 Cycle 4
- 03:09 PM Bug #14559 (Closed): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- Closed in SP915 Cycle 4
- 03:08 PM Bug #14566 (Closed): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 03:02 PM Bug #14366 (Not Resolved): When the document name contains special character then selecting the document for the change request - No Response
- Facing Same issue
- 02:59 PM Bug #14471 (Closed): Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- 02:59 PM Bug #14221 (Closed): Production Inprocess: All Search is not working if Production Inprocess is enabled in IC Settings
- 02:57 PM Bug #14567 (Closed): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- Closed in SP915 Cycle 4
- 02:55 PM Bug #14592 (In Progress): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 12:56 PM Bug #14592 (Not Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 02:54 PM Bug #14681 (Open): Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is Attach rights and View History
- 02:52 PM Bug #14681 (Closed): Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is Attach rights and View History
- Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is At...
- 02:52 PM Bug #14569 (Closed): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- Closed in SP915 Cycle 4
- 02:50 PM Bug #14572 (Closed): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- Closed in SP915 Cycle 4
- 02:48 PM Bug #14578 (Closed): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 02:42 PM Bug #14591 (Not Fixed with Hotfix): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 02:33 PM Bug #14609 (Closed): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- Closed in SP915 Cycle 4
- 02:32 PM Bug #14612 (Closed): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- Closed in SP915 Cycle 4
- 02:31 PM Bug #14547 (Closed): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- 02:31 PM Bug #14619 (Closed): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- 02:30 PM Bug #14539 (Not Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- Refer Screenshot
- 02:28 PM Bug #14618 (Closed): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- Closed in SP915 Cycle 4
- 02:25 PM Bug #14434 (Closed): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 02:17 PM Bug #14555 (Closed): Initiate Concern: When the Supplier was selected from the dropdown list its displaying JS Error
- This Issue is fixed so closing this issue in SP915 Cycle-4 on 30.10.2019
- 01:05 PM Bug #14620 (Closed): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- Closed in SP915 Cycle 4
- 01:04 PM Bug #14621 (Closed): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- Closed in SP915 Cycle 4
- 01:03 PM Bug #14624 (Closed): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- Closed in SP915 Cycle 4
- 12:59 PM Bug #14357 (Closed): Cant able to create Nested concern for PSD approach.
- 12:47 PM Bug #14458 (Closed): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- Closed in Cy4
- 12:46 PM Bug #14534 (Closed): Unable to create concern from Inspection control
- Closed in Cy4
- 12:46 PM Bug #14535 (Closed): On clicking on Chart hyperlink in Receiving Inspection sheet server error pop-up is displayed
- Closed in Cy4
- 12:46 PM Bug #14437 (Closed): Inprocess Inspection sheet is not opening from supervisor approval menu
- Closed in Cy 4
- 12:31 PM Bug #14405 (Closed): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 12:30 PM Bug #14367 (Closed): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 12:24 PM Bug #14275 (Closed): SB-190910324 In similar concern pop up Cancel button is not working.
- 12:24 PM Bug #14368 (Closed): For the concerns created from IC, without making any changes in concern form asks " New Concern form for category and sub category has been changed. Do you want new form changes?"
- 12:08 PM Bug #14381 (Closed): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- 11:59 AM Bug #14400 (Not Resolved): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 11:58 AM Bug #14520 (Closed): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 11:58 AM Bug #14521 (Closed): Concern number is not getting created long with Category code.
- 11:57 AM Bug #14568 (Closed): For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested approach until root causes and permanent corrective actions are identified!" even though root cause and corrective actions are provided.
- As Discussed with Sabu: Removed Initiate Nested Concern button. Because in Supplier side they wont create concern for...
- 11:56 AM Bug #14573 (Closed): The concern is created along with supplier and part number, but logging in as supplier user not shows the created concern.
- 11:56 AM Bug #14574 (Closed): In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- 11:55 AM Bug #14305 (Closed): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 11:55 AM Bug #14529 (Closed): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
10/29/2019
- 08:39 PM Bug #14513 (Resolved): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- 08:05 PM Bug #14513 (In Progress): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- 08:23 PM Bug #14634 (Resolved): In APQP Mail - Site URL and Document URL not displayed fully.
- 08:23 PM Bug #14643 (Resolved): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- 08:09 PM Bug #14454 (In Progress): Reports: Reports is not displaying as User Specific
- 08:09 PM Bug #14436 (Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 03:07 PM Bug #14436 (Not Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- Issue 1 :
Column Selection - we need option in Effectiveness Due date,Effectiveness Status,Effectiveness Comments,Be... - 07:41 PM Suggestion #14364 (Resolved): Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- 07:41 PM Bug #14365 (Resolved): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 07:36 PM Bug #14547 (Resolved): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- 07:19 PM Bug #14547 (In Progress): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- 07:36 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 04:57 PM Bug #14539 (In Progress): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 04:06 PM Bug #14539 (Not Fixed with Hotfix): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- Refer Screenshot
- 07:21 PM Bug #14284 (Resolved): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- 07:20 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:54 PM Bug #14592 (In Progress): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:48 PM Bug #14592 (Not Fixed with Hotfix): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 03:45 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 07:20 PM Bug #14567 (Resolved): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 05:08 PM Bug #14567 (Not Fixed with Hotfix): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 07:07 PM Bug #14619 (Resolved): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- 10:45 AM Bug #14619 (In Progress): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- 06:54 PM Bug #14461 (Resolved): Assign Checklist-> Max and min button need to displayed in assign checklist page
- UI issue is there for maximize button. Need to check whether it need to be included or not
- 06:38 PM Bug #14481 (Resolved): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 02:46 PM Bug #14481 (Future Release): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 02:45 PM Bug #14481 (Not Resolved): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 02:43 PM Bug #14481 (Resolved): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 06:37 PM Bug #14421 (Fixed with Hotfix): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 06:34 PM Bug #14298 (Fixed with Hotfix): Process VDA - There is no option to add Severity for the added Effect.
- 06:31 PM Bug #14566 (Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 06:13 PM Bug #14566 (Resolved): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 05:13 PM Bug #14566 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 06:29 PM Bug #14615 (Fixed with Hotfix): Process VDA: Search functionality is not working
- 04:06 PM Bug #14615 (Resolved): Process VDA: Search functionality is not working
- 03:40 PM Bug #14615 (Not Fixed with Hotfix): Process VDA: Search functionality is not working
- 10:40 AM Bug #14615 (Resolved): Process VDA: Search functionality is not working
- 06:28 PM Bug #14302 (Fixed with Hotfix): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 11:12 AM Bug #14302 (Resolved): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 06:26 PM Bug #14320 (Not Fixed with Hotfix): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 06:23 PM Bug #14582 (Fixed with Hotfix): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- 11:32 AM Bug #14582 (Resolved): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- 06:22 PM Bug #14526 (Fixed with Hotfix): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 06:22 PM Bug #14537 (Yet to Verify): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 05:41 PM Bug #14537 (Resolved): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- After the build it will fixed
- 05:22 PM Bug #14537 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- Refer Screenshot
- 06:20 PM Bug #14538 (Fixed with Hotfix): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 06:18 PM Bug #14540 (Fixed with Hotfix): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 06:15 PM Bug #14548 (Fixed with Hotfix): Process VDA - Topic segment is not changed even after changing the Production Item
- While changing from Focus element dropdown it is not changed
- 06:06 PM Bug #14452 (Fixed with Hotfix): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 06:06 PM Bug #14533 (Fixed with Hotfix): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 06:05 PM Bug #14541 (Fixed with Hotfix): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 05:56 PM Bug #14543 (Fixed with Hotfix): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- 05:53 PM Bug #14544 (Fixed with Hotfix): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 05:50 PM Bug #14600 (Fixed with Hotfix): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- 04:02 PM Bug #14600 (Resolved): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- The Default site loaded for the user will be the site in which that user was created.
- 05:35 PM Bug #14311 (Closed): Effectiveness for findings: Audit programs effective due days are not saving
- Verified
- 05:23 PM Bug #14522 (Fixed with Hotfix): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 05:23 PM Bug #14552 (Fixed with Hotfix): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 05:22 PM Bug #14553 (Fixed with Hotfix): Design and Process VDA - Percentage allocation displays 7th Step
- 05:21 PM Bug #14658 (Resolved): Supplier part number is not getting displayed in SCAR form.
- 02:27 PM Bug #14658 (Open): Supplier part number is not getting displayed in SCAR form.
- 12:47 PM Bug #14658 (Closed): Supplier part number is not getting displayed in SCAR form.
- Supplier part number is not getting displayed in SCAR form even though supplier part number is mapped in the concern.
- 05:19 PM Bug #14556 (Fixed with Hotfix): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- 05:17 PM Bug #14559 (Fixed with Hotfix): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- 05:05 PM Bug #14569 (Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- 05:03 PM Bug #14612 (Fixed with Hotfix): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 04:09 PM Bug #14612 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 03:45 PM Bug #14612 (Not Fixed with Hotfix): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 04:59 PM Bug #14572 (Fixed with Hotfix): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- Remove option for severity is removed
- 11:56 AM Bug #14572 (Resolved): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- 10:48 AM Bug #14572 (In Progress): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- 04:51 PM Bug #14578 (Fixed with Hotfix): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 04:50 PM Bug #14245 (Closed): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Verified in Cycle 3
- 04:45 PM Bug #14357 (Resolved): Cant able to create Nested concern for PSD approach.
- 04:44 PM Bug #14568 (Resolved): For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested approach until root causes and permanent corrective actions are identified!" even though root cause and corrective actions are provided.
- 03:58 PM Bug #14609 (Fixed with Hotfix): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 03:55 PM Bug #14591 (Fixed with Hotfix): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 03:42 PM Bug #14380 (Resolved): The document viewer publish is not working getting object reference not set error
- 03:36 PM Bug #14464 (Closed): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- Verified
- 03:36 PM Bug #14618 (Fixed with Hotfix): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 03:32 PM Bug #14434 (Resolved): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 03:27 PM Bug #14625 (Resolved): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- old label is correct as discussed with smitha
- 03:24 PM Bug #14581 (Resolved): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- 03:19 PM Bug #14620 (Fixed with Hotfix): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- 03:18 PM Bug #14389 (Closed): Linking supplier primary contact responsible for all tasks is not working
- 12:05 PM Bug #14389 (Resolved): Linking supplier primary contact responsible for all tasks is not working
- WAD. It supports only for program
- 03:10 PM Bug #14557 (Resolved): After Rejecting the ECR form - it shows alert- Already rejected.
- 03:08 PM Bug #14390 (Fixed with Hotfix): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 01:38 PM Bug #14390 (Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 03:08 PM Bug #14621 (Fixed with Hotfix): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- Indicators are not displayed in the Legend Popup
- 02:58 PM Bug #14662 (Fixed with Hotfix): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- 02:58 PM Bug #14662 (Open): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- 02:37 PM Bug #14662 (Closed): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- When the Session Time Out is set as 0, system displays the Alert 'Session Timeout time should be in between 1 to 99'
... - 02:58 PM Bug #14383 (Resolved): Search is not working in Widget settings either by using search window or else through search grid
- 02:46 PM Bug #14628 (Future Release): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 02:45 PM Bug #14628 (Not Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 02:44 PM Bug #14628 (Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 10:55 AM Bug #14628 (WAD): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 02:46 PM Bug #14623 (Future Release): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 02:45 PM Bug #14623 (Not Resolved): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 02:43 PM Bug #14623 (Resolved): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 10:54 AM Bug #14623 (WAD): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 02:46 PM Bug #14603 (Future Release): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:45 PM Bug #14603 (Not Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:43 PM Bug #14603 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:40 PM Bug #14603 (WAD): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:40 PM Bug #14603 (Open): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:39 PM Bug #14603 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:39 PM Bug #14603 (In Progress): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:39 PM Bug #14603 (TBD): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:46 PM Bug #14585 (Future Release): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 02:45 PM Bug #14585 (Not Resolved): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 02:43 PM Bug #14585 (Resolved): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 11:01 AM Bug #14585 (WAD): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 02:46 PM Bug #14579 (Future Release): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 02:45 PM Bug #14579 (Not Resolved): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 02:43 PM Bug #14579 (Resolved): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 10:55 AM Bug #14579 (WAD): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 02:46 PM Bug #14576 (Future Release): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:45 PM Bug #14576 (Not Resolved): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:43 PM Bug #14576 (Resolved): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:38 PM Bug #14576 (WAD): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:37 PM Bug #14651 (Resolved): Allowing to add multiple suppliers in a project via Add supplier button
- 02:27 PM Bug #14651 (Open): Allowing to add multiple suppliers in a project via Add supplier button
- 11:57 AM Bug #14651 (Closed): Allowing to add multiple suppliers in a project via Add supplier button
- Allowing to add multiple suppliers in a project via Add supplier button.
- 02:37 PM Bug #14663 (Closed): Archive a project created via Import Excel option and check under Archived project list the project is missing
- 1. Archive a project created via Import Excel option and check under Archived project list the project is missing(APQ...
- 02:27 PM Bug #14276 (Closed): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 02:27 PM Bug #14655 (Open): Clicking on the attachments added in forms, shows 500 server error.
- 12:39 PM Bug #14655 (Resolved): Clicking on the attachments added in forms, shows 500 server error.
- Clicking on the attachments added in forms, shows 500 server error.
- 12:50 PM Bug #14514 (Fixed with Hotfix): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- 12:42 PM Bug #14555 (Resolved): Initiate Concern: When the Supplier was selected from the dropdown list its displaying JS Error
- 12:41 PM Bug #14315 (Resolved): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 12:25 PM Bug #14525 (Fixed with Hotfix): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- Undo and Redo Option has been Removed by Development Team with the authority of there Higher management Decision in S...
- 12:21 PM Bug #14528 (Fixed with Hotfix): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 12:18 PM Bug #14624 (Fixed with Hotfix): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- 11:54 AM Bug #14554 (Fixed with Hotfix): Document name with special character and custom revision not working as expected.
- 11:35 AM Bug #14554 (Resolved): Document name with special character and custom revision not working as expected.
- h3. Clicking on document name with the custom revision number - showing alert - Revision not available.---*fixed*
- 11:44 AM Bug #14376 (Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 11:32 AM Bug #14617 (Resolved): Master folder tag allows to save duplicate data
- 10:57 AM Bug #14570 (Resolved): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 10:34 AM Bug #14570 (Not Fixed with Hotfix): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- Refer Screenshot
- 10:41 AM Bug #14471 (Fixed with Hotfix): Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- Closed in Cy3
- 10:17 AM Bug #14379 (Closed): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
10/28/2019
10/25/2019
- 08:05 PM Bug #14596 (Resolved): The buttons in the meetings page is showing as disabled( Issue with Supplier PPAP only)
- Change in LoadMeeting.cshtml
- 07:30 PM Bug #14567 (Resolved): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 06:53 PM Bug #14585: Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- Nre
- 06:01 PM Bug #14624 (Resolved): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- 04:02 PM Bug #14624 (Open): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- 12:27 PM Bug #14624 (Closed): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- Severity Rating is not listed in the drop down in Add Design Effect Master table.
- 05:55 PM Bug #14543 (Resolved): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- 05:50 PM Bug #14275 (Resolved): SB-190910324 In similar concern pop up Cancel button is not working.
- 05:45 PM Bug #14320 (Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- dupliacion issues
- 05:39 PM Bug #14592 (In Progress): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 05:37 PM Bug #14522 (Resolved): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 03:21 PM Bug #14522 (In Progress): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 05:37 PM Bug #14526 (Resolved): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 03:11 PM Bug #14526 (In Progress): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 05:37 PM Bug #14537 (Resolved): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 05:36 PM Bug #14538 (Resolved): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 05:36 PM Bug #14540 (Resolved): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 05:36 PM Bug #14541 (Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 05:35 PM Bug #14544 (Resolved): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 05:35 PM Bug #14553 (Resolved): Design and Process VDA - Percentage allocation displays 7th Step
- 05:35 PM Bug #14556 (Resolved): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- 05:35 PM Bug #14566 (Resolved): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 05:34 PM Bug #14569 (Resolved): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- 05:34 PM Bug #14591 (Resolved): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 05:34 PM Bug #14618 (Resolved): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 12:23 PM Bug #14618 (In Progress): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 05:29 PM Bug #14421 (Resolved): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 02:28 PM Bug #14421 (In Progress): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 02:03 PM Bug #14421 (Not Resolved): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 05:29 PM Bug #14552 (Resolved): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 02:48 PM Bug #14552 (In Progress): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 05:28 PM Bug #14578 (Resolved): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 04:46 PM Bug #14578 (In Progress): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 05:27 PM Bug #14609 (Resolved): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 02:47 PM Bug #14609 (In Progress): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 05:26 PM Bug #14612 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 11:08 AM Bug #14612 (In Progress): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 05:26 PM Bug #14620 (Resolved): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- 05:16 PM Bug #14621 (Resolved): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- 05:14 PM Bug #14559 (Resolved): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- 05:07 PM Bug #14298: Process VDA - There is no option to add Severity for the added Effect.
- Dev Team has provided Assign Severity Rating in Cycle 3. So Severity for Effect can be added for RISK.
But there ... - 05:04 PM Bug #14643 (Open): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- 04:51 PM Bug #14643 (Closed): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- Click on Auditee : Corrective Actions projects widget is opening/ closing
- 04:38 PM Bug #14630 (Fixed with Hotfix): Report : Findings report->Bench mark field does not display frequently modified data
- 04:37 PM Bug #14630 (Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- 03:25 PM Bug #14630 (Not Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- Issue replicated to Joshua
- 01:23 PM Bug #14630 (Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- Need to run the job to get latest data
- 01:16 PM Bug #14630 (Open): Report : Findings report->Bench mark field does not display frequently modified data
- 01:14 PM Bug #14630 (Closed): Report : Findings report->Bench mark field does not display frequently modified data
- Findings report->Bench mark field does not display frequently modified data
Change the status along with comments... - 04:02 PM Bug #14640 (Open): While clicking on the supplier link from social media page the part details are showing error page.
- 03:49 PM Bug #14640 (Closed): While clicking on the supplier link from social media page the part details are showing error page.
- While clicking on the supplier link from social media page the part details are showing error page.
- 04:02 PM Bug #14634 (Open): In APQP Mail - Site URL and Document URL not displayed fully.
- 02:12 PM Bug #14634 (Closed): In APQP Mail - Site URL and Document URL not displayed fully.
- In APQP Mail - Site URL and Document URL not displayed fully.
- 04:02 PM Bug #14628 (Open): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 01:07 PM Bug #14628 (Closed): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- Context menus for Effect/Failure/Cause must be categorised.
• Assign Severity rating is not displayed for Direct ... - 04:02 PM Bug #14623 (Open): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 10:52 AM Bug #14623 (Closed): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 04:02 PM Bug #14619 (Open): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- 04:02 PM Bug #14617 (Open): Master folder tag allows to save duplicate data
- 04:00 PM Bug #14360 (Fixed with Hotfix): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 03:33 PM Bug #14581: Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- As discussed with sabu,Please make the following changes in assign route screen
1.Show the document owner as Bhuva... - 03:30 PM Bug #14517 (Closed): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Working fine
- 03:26 PM Bug #14562 (Fixed with Hotfix): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 02:15 PM Bug #14562 (Resolved): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 03:13 PM Bug #14626 (Fixed with Hotfix): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:19 PM Bug #14626 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Duplicate issue #14267
- 01:14 PM Bug #14626 (Open): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:03 PM Bug #14626 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 03:08 PM Bug #14252 (Closed): Process Activities ->Unassigned site name is displayed for a process
- 02:30 PM Bug #14629 (TBD): To be Discussed- For Every BOM Import during a program creation (before saving), all the imported details are showing up in the Supplier part details, But our program shows only the latest uploaded details.
- 01:11 PM Bug #14629 (TBD): To be Discussed- For Every BOM Import during a program creation (before saving), all the imported details are showing up in the Supplier part details, But our program shows only the latest uploaded details.
- For Every BOM Import during a program creation (before saving), all the imported details are showing up in the Suppli...
- 02:18 PM Bug #14584 (Fixed with Hotfix): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 02:17 PM Bug #14584 (Resolved): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 02:15 PM Bug #14400 (Resolved): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 02:10 PM Bug #14625 (Open): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 12:50 PM Bug #14625 (Closed): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bul...
- 02:05 PM Bug #14523 (Fixed with Hotfix): Action Management: Action name is displaying twice.
- 10:59 AM Bug #14523 (Resolved): Action Management: Action name is displaying twice.
- 02:05 PM Bug #14564 (Fixed with Hotfix): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 10:59 AM Bug #14564 (Resolved): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 01:19 PM Bug #14359 (Fixed with Hotfix): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 12:58 PM Bug #14359 (Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 12:17 PM Bug #14359 (Not Fixed with Hotfix): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- YYYY/MM/DD format is not supporting
- 01:19 PM Bug #14627 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:18 PM Bug #14627 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:12 PM Bug #14627 (Open): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:11 PM Bug #14627 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:11 PM Bug #14627 (Open): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- WAD. NC filled as code
- 01:05 PM Bug #14627 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:13 PM Bug #14432 (Fixed with Hotfix): Findings Report ->Benchmark data is not displayed in Findings Reports.
- 12:57 PM Bug #14363 (Fixed with Hotfix): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- Displays reminder in Notification setup and route in assign routes
- 12:38 PM Bug #14404 (Fixed with Hotfix): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 12:24 PM Bug #14353 (Fixed with Hotfix): Email for Effectiveness For Findings -> Email subject is wrong.
- 12:21 PM Bug #14368 (Resolved): For the concerns created from IC, without making any changes in concern form asks " New Concern form for category and sub category has been changed. Do you want new form changes?"
- 12:20 PM Bug #14308 (Fixed with Hotfix): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- Verified as Hot fix
- 11:46 AM Bug #14294 (Fixed with Hotfix): While approving the respective action in approver login displays dual window after approver
- 11:00 AM Bug #14294 (Resolved): While approving the respective action in approver login displays dual window after approver
- 11:42 AM Bug #14573 (Resolved): The concern is created along with supplier and part number, but logging in as supplier user not shows the created concern.
- 11:42 AM Bug #14574 (Resolved): In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- 11:36 AM Bug #14608 (Closed): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- 11:35 AM Bug #14608 (Resolved): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- duplication issues
- 10:32 AM Bug #14536 (Fixed with Hotfix): LPA : Auditor and Auditee availability email is not generating
- Issue verified as Hot fix
10/24/2019
- 07:45 PM Bug #14603 (In Progress): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 04:08 PM Bug #14603 (Open): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 03:07 PM Bug #14603 (Closed): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 07:38 PM Bug #14558 (Resolved): In Edge browser - ECR number is shown as link
- There is no option for this, it's built into the program.
Please refer the below microsoft link:
https://answer... - 07:31 PM Bug #14570 (Resolved): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 02:34 PM Bug #14570 (In Progress): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 02:14 PM Bug #14570 (Open): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 12:07 PM Bug #14570 (Closed): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- Multi Language RFD - When click on flow down indicator in tree diagram, the alert option cancel should be converted i...
- 07:31 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 03:10 PM Bug #14539: Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- This is not an issue :
In the Interface matrix, combined interface matrix , FSR, interface matrix immediate pare... - 03:06 PM Bug #14539 (In Progress): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 07:31 PM Bug #14528 (Resolved): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 07:29 PM Bug #14528 (In Progress): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 07:31 PM Bug #14525 (Resolved): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- 02:50 PM Bug #14525 (In Progress): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- 07:31 PM Bug #14514 (Resolved): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- 02:33 PM Bug #14514 (In Progress): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- 07:28 PM Bug #14620 (In Progress): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- 07:27 PM Bug #14620 (Open): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- 05:27 PM Bug #14620 (Closed): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- In the Design VDA, for the Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon. ...
- 07:27 PM Bug #14621 (In Progress): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- 07:25 PM Bug #14621 (Open): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- 05:33 PM Bug #14621 (Closed): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- In the Design VDA, for the Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon. ...
- 07:24 PM Bug #14351 (Fixed with Hotfix): Report : Final Inspection and Capture History reports are not opening
- 06:43 PM Bug #14221 (Fixed with Hotfix): Production Inprocess: All Search is not working if Production Inprocess is enabled in IC Settings
- 06:41 PM Bug #14535 (Fixed with Hotfix): On clicking on Chart hyperlink in Receiving Inspection sheet server error pop-up is displayed
- 06:29 PM Bug #14321 (Closed): Header for Focus Element is displayed as Topic Element
- 06:18 PM Bug #14530 (Fixed with Hotfix): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 06:14 PM Bug #14561 (Fixed with Hotfix): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 06:07 PM Bug #14457 (Fixed with Hotfix): Multi site->Audit program: Remove this alert message for clause in multi site
- 06:02 PM Bug #14245 (Yet to Verify): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Need to get patch from raghu ram .patch not moved
- 05:59 PM Bug #14484 (Closed): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 05:58 PM Bug #14550 (Fixed with Hotfix): Remarks/Objective Evidence field does not display entered data when retrieved
- 05:56 PM Bug #14500 (Closed): (Multi Browser - Chrome) Process VDA - Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- 05:54 PM Bug #14343 (Yet to Verify): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- Not able to select shift though it is defined
- 05:51 PM Bug #14495 (Closed): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- 05:48 PM Bug #14493 (Closed): Multi Browser(Chrome & Firefox) - Design VDA - system displays the Context element as selected while opening Functional/Failure Analysis
- 05:44 PM Bug #14479 (Closed): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- 05:42 PM Bug #14566 (In Progress): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 01:36 PM Bug #14566 (Open): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 11:02 AM Bug #14566 (Closed): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 05:37 PM Bug #14428 (Fixed with Hotfix): LPA :Holiday alert is not displayed when selected the day which is holiday
- 05:35 PM Bug #14382 (Fixed with Hotfix): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- 02:38 PM Bug #14382 (Resolved): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- 05:33 PM Bug #14250 (Fixed with Hotfix): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- 03:58 PM Bug #14250 (Resolved): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- 05:31 PM Bug #14387 (Fixed with Hotfix): Suite: First name,middle name,last name separation is not valid
- Working fine.
- 05:26 PM Bug #14473 (Closed): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 05:24 PM Bug #14405 (Fixed with Hotfix): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 01:18 PM Bug #14405 (Resolved): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 05:22 PM Bug #14305 (Fixed with Hotfix): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 02:37 PM Bug #14305 (Resolved): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 05:22 PM Bug #14408 (Closed): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 05:22 PM Bug #14376 (Not Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 05:21 PM Bug #14367 (Fixed with Hotfix): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 02:37 PM Bug #14367 (Resolved): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 05:21 PM Bug #14529 (Fixed with Hotfix): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
- 02:42 PM Bug #14529 (Resolved): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
- not able to replicate
- 05:20 PM Bug #14619 (Closed): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- When adding function and requirement in FSR by Add From DFMEA button the added function and requirement added as blank
- 05:19 PM Bug #14388 (Closed): Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- 05:17 PM Bug #14316 (Closed): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 05:16 PM Bug #14373 (Closed): Entity->Assign process->While copying process from one entity to another entity while paste does not display hand icon
- 05:16 PM Bug #14370 (Closed): Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select the country,state and city !!" though country is selected
- 05:15 PM Bug #14301 (Closed): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 05:15 PM Bug #14618 (Open): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 05:02 PM Bug #14618 (Closed): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- In the Design VDA, for the Function/Failure Analysis, Delete option is not working as expected. If am deleting the Re...
- 05:14 PM Bug #14371 (Closed): Entity->Assign process window does not displays Labels with same size on X and Y axis
- 05:09 PM Bug #14383 (Not Resolved): Search is not working in Widget settings either by using search window or else through search grid
- Status search is not working "inactive"
- 05:05 PM Bug #14468 (Closed): Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- By default bread crumb will navigate to home page so closed as per shankar comment
- 05:04 PM Bug #14469 (Closed): Shift status is changing without save
- 05:02 PM Bug #14264 (Closed): Problem on Level Creation as Administrator
- 04:58 PM Bug #14253 (Closed): Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- When made inactive assigned process does not display in process activity it display blank
- 04:52 PM Bug #14565 (Fixed with Hotfix): change Management: In the Add Document Tree Level the draft is listed.
- 11:47 AM Bug #14565 (Resolved): change Management: In the Add Document Tree Level the draft is listed.
- 11:47 AM Bug #14565 (Open): change Management: In the Add Document Tree Level the draft is listed.
- 11:02 AM Bug #14565 (Closed): change Management: In the Add Document Tree Level the draft is listed.
- change Management: In the Add Document Tree Level the draft is listed.
- 04:50 PM Bug #14617 (Closed): Master folder tag allows to save duplicate data
- 1) Master folder tag allows to save duplicate data
2) Alert should be renamed as "Please enter the Tag Name" - 04:50 PM Bug #14615 (Open): Process VDA: Search functionality is not working
- 04:43 PM Bug #14615 (Closed): Process VDA: Search functionality is not working
- In the Process VDA wherever the Search Functionality is displaying there that functionality is not working. If we Typ...
- 04:46 PM Bug #14474 (Closed): Master tag folder allows to save and Delete blank space field
- Issue verified on 24-10-2019
- 04:26 PM Bug #14532 (Closed): Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- Not an Issue.
- 02:40 PM Bug #14532 (Resolved): Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- wad
- 02:40 PM Bug #14532: Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- wad
- 04:25 PM Bug #14397 (Closed): Switching between programs not working for Supplier PPAP &AQPQ
- 02:37 PM Bug #14397 (Resolved): Switching between programs not working for Supplier PPAP &AQPQ
- 04:22 PM Bug #14519 (Fixed with Hotfix): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- 04:17 PM Bug #14600 (Open): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- 03:01 PM Bug #14600 (Closed): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in...
- 04:17 PM Bug #14596 (Open): The buttons in the meetings page is showing as disabled( Issue with Supplier PPAP only)
- 02:49 PM Bug #14596 (Closed): The buttons in the meetings page is showing as disabled( Issue with Supplier PPAP only)
- The buttons in the meetings page is showing as disabled . Which doesn't allow to edit the meeting
- 04:17 PM Bug #14584 (Open): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 02:07 PM Bug #14584 (Closed): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- In Edge and IE after selecting the document , the document update will be shown
- 04:17 PM Bug #14582 (Open): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- 01:49 PM Bug #14582 (Closed): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs wh...
- 04:17 PM Bug #14581 (Open): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- 01:45 PM Bug #14581 (Closed): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- Assign route for change request: Document owner is showing the user who initiated the change request.
It should sho... - 04:17 PM Bug #14576 (Open): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 12:28 PM Bug #14576 (Closed): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
Changes needed... - 04:17 PM Bug #14574 (Open): In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- 12:23 PM Bug #14574 (Closed): In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- 04:17 PM Bug #14573 (Open): The concern is created along with supplier and part number, but logging in as supplier user not shows the created concern.
- 12:21 PM Bug #14573 (Closed): The concern is created along with supplier and part number, but logging in as supplier user not shows the created concern.
- The concern is created along with supplier and part number, but logging in as supplier user not shows the created con...
- 04:17 PM Bug #14571 (Open): Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- 12:09 PM Bug #14571 (Closed): Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- 04:17 PM Bug #14568 (Open): For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested approach until root causes and permanent corrective actions are identified!" even though root cause and corrective actions are provided.
- 11:53 AM Bug #14568 (Closed): For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested approach until root causes and permanent corrective actions are identified!" even though root cause and corrective actions are provided.
- For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested...
- 04:17 PM Bug #14564 (Open): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 10:49 AM Bug #14564 (Closed): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level ...
- 04:09 PM Bug #14592 (Open): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 02:33 PM Bug #14592: Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- When clicking on level selector pagination, on the 4th and 5th level the elements of diagram display randomly
Refe... - 02:26 PM Bug #14592 (Closed): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- When clicking on component level pagination, on the 4th and 5th level the elements of diagram display randomly
Ref... - 04:09 PM Bug #14585 (Open): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 02:12 PM Bug #14585 (Closed): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- Design VDA -
Structure Analysis
• Process VDA -
Structure Analysis
Functional Analysis
... - 04:08 PM Bug #14608 (Open): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- 03:29 PM Bug #14608 (Closed): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- 04:07 PM Bug #14609 (Open): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 03:43 PM Bug #14609 (Closed): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- Context Menu for Design VDA is displayed in Process VDA. All the Menus are
- 04:07 PM Bug #14612 (Open): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 03:57 PM Bug #14612 (Closed): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Ele...
- 03:52 PM Bug #14569 (In Progress): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- 01:34 PM Bug #14569 (Open): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- 11:57 AM Bug #14569 (Closed): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- Context menu is not closing even after popup is opening
- 03:35 PM Bug #14353 (Resolved): Email for Effectiveness For Findings -> Email subject is wrong.
- refer screen shot : given : "EwQIMS - Audit Pro : Effectiveness For Findings"
- 03:31 PM Bug #14591 (In Progress): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 03:00 PM Bug #14591 (Open): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 02:26 PM Bug #14591 (Closed): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- Issue occurs in both Design and Process VDA.
Functional and Failure analysis are displayed properly - 03:11 PM Bug #14456 (Yet to Verify): Reports: In the PI field its displaying the PI name as 2 times
- 02:59 PM Bug #14302 (In Progress): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 02:53 PM Bug #14527 (Fixed with Hotfix): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- 02:39 PM Bug #14527 (Resolved): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- 02:52 PM Bug #14524 (Fixed with Hotfix): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- Fixed
- 02:39 PM Bug #14524 (Resolved): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- 02:21 PM Bug #13957 (Closed): Under My deliverable list Navigate Menu is not showing for Supplier PPAP
- 01:17 PM Bug #13957 (Resolved): Under My deliverable list Navigate Menu is not showing for Supplier PPAP
- 02:21 PM Bug #13522 (Closed): Mapping parts for multiple site during project creation the address not showing up in the dropdown for all sites
- UI Change
- 01:16 PM Bug #13522 (Resolved): Mapping parts for multiple site during project creation the address not showing up in the dropdown for all sites
- 02:15 PM Bug #14578 (Open): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 12:51 PM Bug #14578 (Closed): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- • Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.
... - 01:36 PM Bug #14567 (Open): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 11:10 AM Bug #14567 (Closed): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 01:11 PM Bug #14579 (Open): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 01:08 PM Bug #14579 (Closed): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- Context menu is opening far away from the selected block. So while moving the mouse pointer, context menu is closing.
- 01:05 PM Bug #14572 (Open): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- 12:19 PM Bug #14572 (Closed): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- After Edit Effect(Remove Severity), Severity rating remains same in Diagrammatic view. But in tree/Table view it is r...
- 12:16 PM Bug #14470 (Closed): Not able to replicate:Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its showing attach rights and the inherit is checked , but dont know how the rights has been set
- Couldn't replicate this issue so closing the issue
- 12:10 PM Bug #14454 (Not Resolved): Reports: Reports is not displaying as User Specific
- 11:50 AM Bug #14434 (Not Resolved): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 14434, badge number is nt displaying. And also department, batch number, designation are shows as editable field actu...
- 11:49 AM Bug #14265 (Closed): The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- 11:49 AM Bug #14267 (Closed): Clicking on track project in SCAR form shows empty page.
- 11:49 AM Bug #14270 (Closed): In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- 11:49 AM Bug #14366 (Resolved): When the document name contains special character then selecting the document for the change request - No Response
- 11:48 AM Bug #14452 (Resolved): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 11:48 AM Bug #14275 (Not Resolved): SB-190910324 In similar concern pop up Cancel button is not working.
- 11:48 AM Bug #14533 (Resolved): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 11:47 AM Bug #14560 (Resolved): PDF disable: When viewing the deleted document from actions, shows error
- 11:47 AM Bug #14315 (Not Fixed with Hotfix): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 11:42 AM Bug #14475 (Closed): Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
- 11:41 AM Bug #14381 (Fixed with Hotfix): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- 11:01 AM Bug #14381 (Resolved): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- 11:38 AM Bug #14521 (Fixed with Hotfix): Concern number is not getting created long with Category code.
- 11:37 AM Bug #14291 (Closed): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- 11:34 AM Bug #14306 (Closed): The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- NOT able to replicate
- 11:34 AM Bug #14520 (Fixed with Hotfix): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 11:33 AM Bug #14288 (Closed): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- Fixed
- 11:30 AM Bug #14415 (Closed): In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- 11:15 AM Bug #14480 (Closed): Dont display Supplier in any of the user selection part.
- 11:15 AM Bug #14390 (In Progress): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 11:08 AM Bug #14449 (Closed): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 11:03 AM Bug #14417 (Closed): Label must be renamed as SEooC instead of SEOOC
- 10:23 AM Bug #14277 (Closed): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 10:23 AM Bug #14384 (Closed): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 10:22 AM Bug #14410 (Closed): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 09:50 AM Bug #13538 (Closed): Need to rename the the buttons and the confirmation messages
- Design issues- need to fix
- 09:38 AM Bug #14482 (Closed): Change Management- When the Requester and responsible person is same then the document change email notification is not generating
- Closed in Build
10/23/2019
- 09:13 PM Bug #14353 (In Progress): Email for Effectiveness For Findings -> Email subject is wrong.
- 05:43 PM Bug #14353 (Not Resolved): Email for Effectiveness For Findings -> Email subject is wrong.
- Still the issue occur
- 09:13 PM Bug #14363 (Resolved): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 07:10 PM Bug #14363 (Not Resolved): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- Still not implement in business rules
- 01:12 PM Bug #14363 (Resolved): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 08:51 PM Bug #14245 (Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:16 PM Bug #14245: Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Once Patch moved Change it to resolved status. Single Select change/Multiselect in process
- 03:29 PM Bug #14245 (Open): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 08:51 PM Bug #14376 (Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 04:46 PM Bug #14376 (Not Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 07:43 PM Bug #14325 (Closed): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- 07:43 PM Bug #14325: Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- verified in Cycle 3
- 07:43 PM Bug #14281 (Closed): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- Verified in cycle 3
- 07:42 PM Bug #14444 (Closed): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- Verified in cycle 3
- 07:42 PM Bug #14467 (Closed): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- Verified
- 07:37 PM Bug #14359 (Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 06:43 PM Bug #14359 (Not Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 06:43 PM Bug #14359: Closed Out -> Effectiveness Due Date field is not supporting multidate format
- Still the issue occur
- 07:16 PM Bug #14561 (Resolved): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 07:03 PM Bug #14561 (Open): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- Not an issue
- 06:33 PM Bug #14561 (Closed): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 07:16 PM Bug #14308 (Resolved): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 06:24 PM Bug #14308 (Not Resolved): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- Issue replicated to RK not fixed
- 07:08 PM Bug #14562 (Open): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 06:42 PM Bug #14562 (Closed): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- Changing the effectiveness frequently and closed the concern form displays error on the form
- 07:08 PM Bug #14560 (Open): PDF disable: When viewing the deleted document from actions, shows error
- 06:25 PM Bug #14560 (Closed): PDF disable: When viewing the deleted document from actions, shows error
- PDF disable: When viewing the deleted document from actions, shows error
- 07:08 PM Bug #14559 (Open): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- 06:13 PM Bug #14559 (Closed): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- 07:08 PM Bug #14558 (Open): In Edge browser - ECR number is shown as link
- 05:44 PM Bug #14558 (Closed): In Edge browser - ECR number is shown as link
- In Edge browser - ECR number is shown as link
- 07:08 PM Bug #14557 (Open): After Rejecting the ECR form - it shows alert- Already rejected.
- 05:25 PM Bug #14557 (Closed): After Rejecting the ECR form - it shows alert- Already rejected.
- After Rejecting the ECR form - it shows alert- Already rejected.
- 07:08 PM Bug #14555 (Open): Initiate Concern: When the Supplier was selected from the dropdown list its displaying JS Error
- 04:55 PM Bug #14555 (Closed): Initiate Concern: When the Supplier was selected from the dropdown list its displaying JS Error
- In the Initiate Concern Window, when the User selecting the Supplier from the dropdown list its displaying JS Error a...
- 07:08 PM Bug #14554 (Open): Document name with special character and custom revision not working as expected.
- 04:54 PM Bug #14554 (Closed): Document name with special character and custom revision not working as expected.
- Document name with special character and custom revision not working as expected.
Clicking on document name with s... - 06:57 PM Bug #14354 (Closed): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- 06:57 PM Bug #14354: Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- Verified in cycle 3
- 06:53 PM Bug #14360 (Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- check the scree shot, 'not verified' is default status
- 06:43 PM Bug #14360 (Not Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- Still the issue occur
- 06:28 PM Bug #14459 (Closed): LPA : Submit button is available even after finding is closeout bu auditor
- Duplicate issue so closed but still not resolved
- 06:28 PM Bug #14307 (Closed): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- 06:27 PM Bug #14336 (Closed): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- 06:27 PM Bug #14534 (Fixed with Hotfix): Unable to create concern from Inspection control
- 04:23 PM Bug #14534 (Open): Unable to create concern from Inspection control
- 12:56 PM Bug #14534 (Closed): Unable to create concern from Inspection control
- Unable to create concern from Inspection control
- 06:23 PM Bug #14328 (Closed): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- 06:22 PM Bug #14324 (Closed): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 06:21 PM Bug #14317 (Closed): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 06:17 PM Bug #14312 (Closed): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 06:14 PM Bug #14279 (Closed): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- Verified in SP_915 CY-3
- 03:25 PM Bug #14279: LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- Issue verified in SP915 Cy-3
- 06:14 PM Bug #14433 (Closed): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- Verified in SP_915 CY-3
- 06:13 PM Bug #14446 (Closed): LPA : Mandatory auditee response is not working as expected for OFI
- Verified in SP_915 CY-3
- 06:10 PM Bug #14297 (Closed): LPA : while attaching attachment in 8D form displays error
- Issue verified in PS-915 CY-3
- 06:09 PM Bug #14455 (Closed): When tried to enter Department name manually in 5why form of 7D approach displays error
- Issue verified in SP_915 cy-3
- 06:07 PM Bug #14302: Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- Filter is working based on Operation Category alone.
While selecting FourM Category it displays wrong result - 06:03 PM Bug #14302 (Not Resolved): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 06:04 PM Bug #14442 (Closed): LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- Issue verified in SP_915 Cy-3
- 06:01 PM Bug #14326: Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Verified
- 05:30 PM Bug #14326 (Closed): Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Verified
- 06:00 PM Bug #14300 (Closed): Attached attachment name displays in number format after attached
- Issue verified in SP915 Cy-3
- 05:56 PM Bug #13905 (Closed): When Project is not selected and from project listing and initiating change request from APQP (With approval) is not working.
- 05:56 PM Bug #14389 (Reopen): Linking supplier primary contact responsible for all tasks is not working
- Supplier contact person not assigned as resource by default
- 04:06 PM Bug #14389 (Closed): Linking supplier primary contact responsible for all tasks is not working
- closed in build
- 05:52 PM Bug #14276 (Not Resolved): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 05:52 PM Bug #14521 (Resolved): Concern number is not getting created long with Category code.
- 04:27 PM Bug #14521 (Open): Concern number is not getting created long with Category code.
- 11:53 AM Bug #14521 (Closed): Concern number is not getting created long with Category code.
- Concern number is not getting created long with Category code.
- 05:48 PM Bug #14544 (In Progress): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 04:20 PM Bug #14544 (Open): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 03:09 PM Bug #14544 (Closed): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- While clicking OK button directly without doing any changes, popup window is not closing
- 05:47 PM Bug #14361 (Closed): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- 05:47 PM Bug #14361: Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- Verified in cycle 3
- 05:47 PM Bug #14556 (In Progress): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- 05:47 PM Bug #14556 (Open): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- 05:09 PM Bug #14556 (Closed): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- In the Process VDA, The Function/Failure Analysis Menu is not loading the Page when the User Opens the VDA through th...
- 05:47 PM Bug #14515 (Fixed with Hotfix): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- Score calculation for checklists is working as expected
- 12:20 PM Bug #14515 (Resolved): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- Conflicted with Audit pro Score
- 09:45 AM Bug #14515 (Open): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- 05:46 PM Bug #14518 (Fixed with Hotfix): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- Able to see the parent checklists score has applier for its child(checkpoints)
- 01:40 PM Bug #14518 (Resolved): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- 09:45 AM Bug #14518 (Open): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- 05:45 PM Suggestion #14339 (Closed): Invalid URL prompt message need to be changed. Instead of "URL Error" change it to "Please specify Valid URL"
- 05:41 PM Bug #14520 (Resolved): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 04:27 PM Bug #14520 (Open): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 11:16 AM Bug #14520 (Closed): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 05:34 PM Bug #14289 (Closed): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- 05:32 PM Bug #14392 (Closed): When the ECR form is submitted for approval then the requestor and approver can able to delete the documents which are already requested. It should not allow to delete the document request
- 05:28 PM Bug #14457 (Resolved): Multi site->Audit program: Remove this alert message for clause in multi site
- 05:11 PM Bug #14457 (In Progress): Multi site->Audit program: Remove this alert message for clause in multi site
- 04:42 PM Bug #14457 (Not Resolved): Multi site->Audit program: Remove this alert message for clause in multi site
- 04:42 PM Bug #14457: Multi site->Audit program: Remove this alert message for clause in multi site
- Need to fix this issue
- 05:26 PM Bug #14550 (Resolved): Remarks/Objective Evidence field does not display entered data when retrieved
- 04:26 PM Bug #14550 (Open): Remarks/Objective Evidence field does not display entered data when retrieved
- 03:51 PM Bug #14550 (Closed): Remarks/Objective Evidence field does not display entered data when retrieved
- Remarks/Objective Evidence field does not display entered data when retrieved
- 05:21 PM Bug #14436 (Yet to Verify): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- need to discuss with bijoy
- 05:21 PM Bug #14292 (Yet to Verify): Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- 05:21 PM Bug #14428 (Resolved): LPA :Holiday alert is not displayed when selected the day which is holiday
- 05:17 PM Bug #14428 (Not Resolved): LPA :Holiday alert is not displayed when selected the day which is holiday
- 05:20 PM Bug #14448 (Yet to Verify): Checklist page-> Minus value are displayed in Score value text box box
- 05:13 PM Bug #14448 (Resolved): Checklist page-> Minus value are displayed in Score value text box box
- Make it as TBD. Other wise issue will take in count
- 04:42 PM Bug #14448 (Not Resolved): Checklist page-> Minus value are displayed in Score value text box box
- Need to discuss with bijoy
- 05:19 PM Bug #14397 (Not Resolved): Switching between programs not working for Supplier PPAP &AQPQ
- Still not able to switch .
- 05:19 PM Bug #14409 (Closed): Even after rejection also the ECR form window is not closing and the change document request action is not removed for the user also
- 05:19 PM Bug #14327 (Closed): Email for Effectiveness For Findings->Some fields are missing in emails content
- 05:18 PM Bug #14327: Email for Effectiveness For Findings->Some fields are missing in emails content
- font type is different
- 05:16 PM Bug #14286 (Closed): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- Verified
- 05:15 PM Bug #14463 (Closed): Remainder/Escalation mail -> effectiveness -> Count display is incorrect. I have verified and validation only one finding but it show 3 finding in content
- Verified in cycle 3
- 10:30 AM Bug #14463 (Resolved): Remainder/Escalation mail -> effectiveness -> Count display is incorrect. I have verified and validation only one finding but it show 3 finding in content
- 05:12 PM Bug #14519 (Resolved): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- 04:23 PM Bug #14519 (Open): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- 11:15 AM Bug #14519 (Closed): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it ...
- 05:10 PM Bug #14352 (Closed): CM: Before the ECR form gets approve the Change request actions are listed for the Responsibility person.
- 05:09 PM Bug #14362 (Closed): Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request status as "Incomplete"
- 04:59 PM Bug #14311 (Yet to Verify): Effectiveness for findings: Audit programs effective due days are not saving
- need to discuss with bijoy
- 04:55 PM Bug #14311 (Resolved): Effectiveness for findings: Audit programs effective due days are not saving
- 04:25 PM Bug #14311 (Not Resolved): Effectiveness for findings: Audit programs effective due days are not saving
- 04:24 PM Bug #14311: Effectiveness for findings: Audit programs effective due days are not saving
- Data is save, input value is 1000, but show 99 in effectiveness text box
- 04:51 PM Bug #14541 (In Progress): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 04:20 PM Bug #14541 (Open): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 02:53 PM Bug #14541 (Closed): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- Changes made in both the Popup windows are not reflected anywhere
- 04:51 PM Bug #14538 (In Progress): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 04:20 PM Bug #14538 (Open): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 02:10 PM Bug #14538 (Closed): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is remo...
- 04:50 PM Bug #14537 (In Progress): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 04:20 PM Bug #14537 (Open): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 01:10 PM Bug #14537 (Closed): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- THLEditCharacteristics and THLDeleteChacteristics is displayed in Functional Analysis
THLEditCharacteristics and T... - 04:48 PM Bug #14540 (In Progress): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 04:20 PM Bug #14540 (Open): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 02:27 PM Bug #14540 (Closed): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- • While selecting Delete Characteristics option, system displays Edit FourM Pop window in header but displays Operati...
- 04:47 PM Bug #14414 (Closed): Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- Issue verified in SP-915 Cy-3
- 04:44 PM Bug #14477 (Closed): VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- Able to view/edit checklists details
- 04:43 PM Bug #14407 (Closed): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- 04:43 PM Bug #14407: Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Nikhil already discussed, SO closing this issue
- 02:33 PM Bug #14407 (Resolved): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Not an issue. It is Heading for NC and OFI
- 02:13 PM Bug #14407 (Not Resolved): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- 02:13 PM Bug #14407: Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Heading should be right align is not fixed
- 04:43 PM Bug #14516 (Closed): Parts name displaying twice in supplier engagement model screen against its location
- working fine
- 11:23 AM Bug #14516 (Resolved): Parts name displaying twice in supplier engagement model screen against its location
- 09:45 AM Bug #14516 (Open): Parts name displaying twice in supplier engagement model screen against its location
- 04:37 PM Bug #14390 (Not Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 11:28 AM Bug #14390 (Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 04:35 PM Bug #14498 (Closed): Not able to create a Supplier PPAP program for a supplier with one part to different location
- Closed in build
- 04:35 PM Bug #14453 (Closed): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- 01:10 PM Bug #14453 (Fixed with Hotfix): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- Verified in cycle 3
- 04:31 PM Bug #14528 (Open): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 12:31 PM Bug #14528 (Closed): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 04:31 PM Bug #14525 (Open): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- 12:25 PM Bug #14525 (Closed): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- Tree Diagrams: Undo and Redo button is not working in Tree diagrams
- 04:30 PM Bug #14539 (Open): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 02:12 PM Bug #14539 (Closed): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected i...
- 04:28 PM Bug #14547 (Open): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- 03:33 PM Bug #14547 (Closed): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- when deleting the decomposed function and requirement ASIL, It does not revert back to the old ASIL value
- 04:27 PM Bug #14529 (Open): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
- 12:34 PM Bug #14529 (Closed): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
- 04:27 PM Bug #14552 (Open): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 03:57 PM Bug #14552 (Closed): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- After collapsing the element and again clicking on the Expand arrow, arrow is disappearing.
- 04:26 PM Bug #14551 (Open): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- 03:55 PM Bug #14551 (Closed): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- In Main2, For the Selected Header Press the "Ctrl+UP Arrow" Key or "Ctrl+DOWN Arrow" Key or "Ctrl+LEFT Arrow" Key or ...
- 04:25 PM Bug #14532 (Open): Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- 12:45 PM Bug #14532 (Closed): Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- Given Supplier as optional in charter template and Select template from the project/program charter page . After clic...
- 04:25 PM Bug #14524 (Open): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- 12:13 PM Bug #14524 (Closed): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- Created a program with same part/supplier with 2 different location. In the project charter page both the details(2 l...
- 04:24 PM Bug #14527 (Open): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- 12:27 PM Bug #14527 (Closed): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- After creating a Program/Project along with the selected supplier users the admin user of another supplier is also li...
- 04:24 PM Bug #14553 (In Progress): Design and Process VDA - Percentage allocation displays 7th Step
- 04:20 PM Bug #14553 (Open): Design and Process VDA - Percentage allocation displays 7th Step
- 04:02 PM Bug #14553 (Closed): Design and Process VDA - Percentage allocation displays 7th Step
- Percentage allocation displays 7th Step
- 04:23 PM Bug #14535 (Open): On clicking on Chart hyperlink in Receiving Inspection sheet server error pop-up is displayed
- 01:01 PM Bug #14535 (Closed): On clicking on Chart hyperlink in Receiving Inspection sheet server error pop-up is displayed
- On clicking on Chart hyperlink in Receiving Inspection sheet Server error pop-up is displayed
Charts are opening on ... - 04:21 PM Bug #14533 (Open): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 12:52 PM Bug #14533 (Closed): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- New document request: Alert message is showing to change the doc number and name even the folder doesn't have the doc...
- 04:20 PM Bug #14548 (Open): Process VDA - Topic segment is not changed even after changing the Production Item
- 03:40 PM Bug #14548 (Closed): Process VDA - Topic segment is not changed even after changing the Production Item
- Topic segment is not changed even after changing the Production Item.
It displays the Topic Segment of previously ... - 04:20 PM Bug #14543 (Open): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- 03:01 PM Bug #14543 (Closed): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- 04:20 PM Bug #14526 (Open): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 12:26 PM Bug #14526 (Closed): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is cha...
- 04:20 PM Bug #14522 (Open): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 11:57 AM Bug #14522 (Closed): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- In the Segment Selection Window (In Process VDA wherever this Segment Selection Window displaying) for the Single Seg...
- 04:05 PM Bug #14398 (Closed): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- Issue verified in SP915 CY-3
- 02:02 PM Bug #14398 (Resolved): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- 01:19 PM Bug #14398 (Not Resolved): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- System not allows to select approval process though approval process is enables
- 04:05 PM Bug #14366 (Not Resolved): When the document name contains special character then selecting the document for the change request - No Response
- 04:01 PM Bug #14331 (Closed): checkpoint logic is not displaying in Fill checklist screen though it is defined
- Issue verified in SP_915 CY-3
- 04:01 PM Bug #14285 (Closed): LPA : Add audit activities window is not displaying Respective auditor of the particular audit
- Issue verified in SP_915 Cy-3
- 04:00 PM Bug #14322 (Yet to Verify): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- Automatic findings are not generating so not able to verify this issue
- 03:55 PM Bug #14322 (Resolved): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 03:51 PM Bug #14322 (Reopen): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 03:47 PM Bug #14322 (Closed): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- Issue verified in SP_915 CY-3
- 04:00 PM Bug #13538: Need to rename the the buttons and the confirmation messages
- Issue 1 Closed.
- 03:32 PM Bug #14536 (Resolved): LPA : Auditor and Auditee availability email is not generating
- 03:27 PM Bug #14536 (Open): LPA : Auditor and Auditee availability email is not generating
- 01:08 PM Bug #14536 (Closed): LPA : Auditor and Auditee availability email is not generating
- 1) Auditor and Auditee availability email is not generating
2) When clicked on send confirmation email for firs... - 03:26 PM Bug #14380 (Not Resolved): The document viewer publish is not working getting object reference not set error
- 03:26 PM Bug #14348 (Closed): Issue with Output document attachment in Document viewer after selecting "Is Output Document Required ?=No.
- Closed in the BUild
- 03:24 PM Bug #14329 (Closed): Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
- Closed in Build
- 03:24 PM Bug #14294 (Not Resolved): While approving the respective action in approver login displays dual window after approver
- 03:23 PM Bug #14291 (Not Resolved): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- 03:20 PM Bug #14290 (Closed): LPA : Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan waiting for approval" alert message
- Issue verified in SP_915 Cy-3
- 03:19 PM Bug #14288 (Not Resolved): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- 03:06 PM Bug #14278 (Closed): LPA : while creating equipment under manufacturing line displays error
- Issue verified in SP_915 Cy-3
- 03:05 PM Bug #14271 (Closed): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- Issue verified in SP_915 Cy-3
- 03:05 PM Bug #14258 (Closed): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- Issue verified in SP_915 Cy-3
- 03:03 PM Bug #14268 (Closed): Template to project conversion - Showing error Supplier PPAP
- Closed in Build
- 03:00 PM Bug #14309 (Closed): "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- Closed in Build
- 02:58 PM Bug #14272 (Closed): Archive Project is not site specific.
- Closed in Build
- 02:53 PM Bug #14412 (Closed): After working on the programs in the nested view the gantt page getting blank
- Closed in Build
- 02:52 PM Bug #14412: After working on the programs in the nested view the gantt page getting blank
- Closed in build
- 02:51 PM Bug #14416 (Closed): The task rating color is not compatable with the text color of %completion option
- Closed in Build
- 02:50 PM Bug #14483 (Closed): Not able to attach draft document using special characters in file and document name
- Closed in cycle 3
- 02:23 PM Bug #14323 (Closed): When trying to delete the document from the ECN form then in the prompt it shows "error" before the alert message.
- 02:17 PM Bug #14464 (Yet to Verify): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- Audit date is not displayed after publish multiple time
- 02:08 PM Bug #14313 (Closed): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- Verified in cycle 3
- 01:35 PM Bug #14345 (Closed): Supplier -> Spell mistake in various pages / Content change in alert message
- Verified in cycle 3
- 01:32 PM Bug #14423 (Closed): LPA : Drop down button need to be displayed on RHS for the Checkpoints
- 01:32 PM Bug #14426 (Closed): LPA: Time Period as "month" should not allow to select Past months from the Calendar month selection
- As per nikhil comment closing this issue but my concern is why system is allowing to select past months though lpa wi...
- 01:26 PM Bug #14411 (Closed): Page is not responding when clicked on save in Audit assign screen
- Issue verified in SP_915 CY-3
- 01:22 PM Bug #14401 (Closed): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- 12:56 PM Bug #14401 (Fixed with Hotfix): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- Verified in Cycle 3
- 01:21 PM Bug #14403 (Closed): AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- 01:21 PM Bug #14403: AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- Verified in cycle 3
- 01:21 PM Bug #14530 (Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 01:21 PM Bug #14530 (Open): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 12:35 PM Bug #14530 (Closed): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 01:16 PM Bug #14466 (Closed): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- verified in cycle 3
- 01:08 PM Bug #14466 (Fixed with Hotfix): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Verified in cycle3
- 01:14 PM Bug #14396 (Closed): Multi Site : Layer creation is not displaying all the modes available displays only Shift mode
- Issue verified in SP_915 Cy-3
- 01:14 PM Bug #14402 (Closed): Multi Site: Duplicate equipment are displaying in LPA schedule screen
- Issue verified in SP_915 Cy-3
- 01:13 PM Bug #14296 (Closed): Auditee response/Report: Date of audit is not displayed in Auditee response report
- Verified in cycle 3
- 01:09 PM Bug #14437 (Fixed with Hotfix): Inprocess Inspection sheet is not opening from supervisor approval menu
- 01:04 PM Bug #14437 (Resolved): Inprocess Inspection sheet is not opening from supervisor approval menu
- 01:08 PM Bug #14458 (Fixed with Hotfix): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- 01:04 PM Bug #14458 (Resolved): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- 01:05 PM Bug #14356 (Closed): Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- working fine
- 01:05 PM Bug #14355 (Closed): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- working fine
- 01:04 PM Bug #14422 (Closed): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- Working fine
- 12:52 PM Bug #14391 (Closed): When creating a program using Master Template then the added supplier project is not listed in the Vendor view as well as for SQE , SQM and Supplier contact person.
- Master Template - Add project concept is changed
Master Template - Need to Map template - 12:43 PM Bug #14379 (Yet to Verify): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
- 12:42 PM Bug #14405 (Not Resolved): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 12:36 PM Bug #14310 (Closed): Changing the status of the project charter, the status view icon is missing in the project charter page
- 12:18 PM Bug #14310 (Resolved): Changing the status of the project charter, the status view icon is missing in the project charter page
- 12:36 PM Bug #14367 (Not Resolved): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 12:19 PM Bug #13957: Under My deliverable list Navigate Menu is not showing for Supplier PPAP
- WAD
- 12:06 PM Bug #14523 (Open): Action Management: Action name is displaying twice.
- 12:01 PM Bug #14523 (Closed): Action Management: Action name is displaying twice.
- Action Management: Action name is displaying twice in the action screen.
- 11:57 AM Bug #14333 (Closed): Terminating the second revision document shows the document status as "Awaiting approval". (Local document and aqua document and URL Publish)
- 11:40 AM Bug #14346 (Closed): Without selecting the project when change request is initiated then in the project listing screen - "Select project " prompt is displayed.
- 11:38 AM Bug #14341 (Closed): Project and supplier icon is not listed in the System tree view for the program
- 11:37 AM Bug #14319 (Closed): In Program - Deliverable name is not displayed in the risk register.
- 11:33 AM Bug #14305 (Not Resolved): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 11:32 AM Bug #14335 (Closed): Need output document icon for the URL link attachments only for URL Link icon is missing
- 11:31 AM Bug #14287 (Closed): Regression: select a Draft project and Click on Projects menu, the project listing screen is opening in the new tab.(Change the pillar and click on projects menu)
- 11:31 AM Bug #14277 (Resolved): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 11:31 AM Bug #14342 (Closed): Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- 11:31 AM Bug #14293 (Closed): Not able to publish the charter of Change management initiated project.
- 11:30 AM Bug #14280 (Closed): Not able to attach document from DocPro - Not working
- 11:24 AM Bug #14517 (Resolved): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Approval process is not selected automatically for multi site.Handled
- 09:44 AM Bug #14517 (Open): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- 10:00 AM Bug #14269 (Closed): Regression: Template it is showing the output icon for the attached input document.
- 09:45 AM Bug #14513 (Open): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- 09:44 AM Bug #14514 (Open): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
10/22/2019
- 06:33 PM Bug #14518 (Closed): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- 06:28 PM Bug #14517 (Closed): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though busi...
- 06:27 PM Bug #14516 (Closed): Parts name displaying twice in supplier engagement model screen against its location
- Parts name displaying twice in supplier engagement model screen against its location
- 06:26 PM Bug #14515 (Closed): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- VAM audit-Checklists Score calculation is wrong
- 05:44 PM Bug #14514 (Closed): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
Refer... - 05:35 PM Bug #14513 (Closed): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- Indicator indicates the flow down has done even when there no flow down is done.
- 04:24 PM Bug #14337 (Closed): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- 04:19 PM Bug #14476 (Closed): Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supplier users irrespective of doc pro settings level selection
- 04:15 PM Bug #14203 (Closed): When entering document name with special character then it shows different alert. Show common alert when the special characters are not accepted.Same for file name which has spl char(Attached the doc for ref))
- 04:13 PM Bug #14274 (Closed): Groups: When creating a new group, By default view documents rights should be checked
- 04:09 PM Bug #14439 (Closed): Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision as A in email
- 03:37 PM Bug #14306 (Resolved): The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- 03:37 PM Bug #14306: The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- not replicated
- 03:36 PM Bug #14380 (Resolved): The document viewer publish is not working getting object reference not set error
- Not replicated
- 03:36 PM Bug #14288 (Resolved): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- 03:35 PM Bug #14291 (Resolved): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- 03:34 PM Bug #14293 (Resolved): Not able to publish the charter of Change management initiated project.
- 03:11 PM Bug #14293: Not able to publish the charter of Change management initiated project.
- Issue Closed
- 03:33 PM Bug #14305 (Resolved): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 03:33 PM Bug #14309 (Resolved): "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- 03:32 PM Bug #14367 (Resolved): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 03:30 PM Bug #14268 (Resolved): Template to project conversion - Showing error Supplier PPAP
- 03:30 PM Bug #14269 (Resolved): Regression: Template it is showing the output icon for the attached input document.
- 02:52 PM Bug #14269: Regression: Template it is showing the output icon for the attached input document.
- Issue closed
output icon will be displayed but clicking on output icon will not populate the output attachment window - 03:30 PM Bug #14272 (Resolved): Archive Project is not site specific.
- 03:29 PM Bug #14280 (Resolved): Not able to attach document from DocPro - Not working
- 03:29 PM Bug #14287 (Resolved): Regression: select a Draft project and Click on Projects menu, the project listing screen is opening in the new tab.(Change the pillar and click on projects menu)
- 03:28 PM Bug #14333 (Resolved): Terminating the second revision document shows the document status as "Awaiting approval". (Local document and aqua document and URL Publish)
- 03:27 PM Suggestion #14339 (Resolved): Invalid URL prompt message need to be changed. Instead of "URL Error" change it to "Please specify Valid URL"
- Not an issue . put it in suggestion
- 03:26 PM Bug #14335 (Resolved): Need output document icon for the URL link attachments only for URL Link icon is missing
- WAD
- 03:25 PM Bug #14342 (Resolved): Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- 03:25 PM Bug #14346 (Resolved): Without selecting the project when change request is initiated then in the project listing screen - "Select project " prompt is displayed.
- 03:24 PM Bug #14348 (Resolved): Issue with Output document attachment in Document viewer after selecting "Is Output Document Required ?=No.
- 03:24 PM Bug #14379 (Resolved): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
- 03:23 PM Bug #14389 (Resolved): Linking supplier primary contact responsible for all tasks is not working
- 03:23 PM Bug #14391 (Resolved): When creating a program using Master Template then the added supplier project is not listed in the Vendor view as well as for SQE , SQM and Supplier contact person.
- 03:22 PM Bug #14397 (Resolved): Switching between programs not working for Supplier PPAP &AQPQ
- WAD
- 03:22 PM Bug #14405 (Resolved): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 03:21 PM Bug #14412 (Resolved): After working on the programs in the nested view the gantt page getting blank
- 03:21 PM Bug #14416 (Resolved): The task rating color is not compatable with the text color of %completion option
- 03:19 PM Bug #14483 (Resolved): Not able to attach draft document using special characters in file and document name
- 03:18 PM Bug #14498 (Resolved): Not able to create a Supplier PPAP program for a supplier with one part to different location
- 03:13 PM Bug #14443 (Closed): Multilanguage:Customize email message:User should customize language specific emails. The content customize in English should not be reflected for all languages
- 03:06 PM Bug #14452 (Not Resolved): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- Fixed in Document management not in TOC
- 02:47 PM Bug #14494 (Closed): Process VDA: Process Flow Tool Tip is displaying wrongly
- This issue is fixed and closing this issue on 22.10.2019
- 02:46 PM Bug #14447 (Closed): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- This issue is fixed and closing this issue on 22.10.2019
- 02:42 PM Bug #14427 (Closed): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- This issue is fixed and closing this issue on 22.10.2019
- 02:42 PM Bug #14425 (Closed): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- This issue is fixed and closing this issue on 22.10.2019
- 02:32 PM Bug #14431 (Closed): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- This issue is fixed in the Cycle-3 so closing this issue on 22.10.2019
- 01:15 PM Bug #14245: Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Change the issue to open. by mistake change status as resolved. I cannot able to change status to open.. Issue fix Ne...
- 12:50 PM Bug #14315 (Resolved): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
10/21/2019
- 11:16 PM Bug #14456 (Resolved): Reports: In the PI field its displaying the PI name as 2 times
- 11:16 PM Bug #14454 (Resolved): Reports: Reports is not displaying as User Specific
- 11:16 PM Bug #14436 (Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 11:16 PM Bug #14432 (Resolved): Findings Report ->Benchmark data is not displayed in Findings Reports.
- 10:10 PM Feature/Enhancement #14413 (Resolved): Supplier portal module should be display in social media
- For Supplier Portal, there is already Social media is available, for that Have to select the SocialMedia layout in Ad...
- 10:06 PM Feature/Enhancement #14385 (In Progress): User log->when session is expired system is not considering the logout time
- 10:06 PM Bug #13538: Need to rename the the buttons and the confirmation messages
- Not able to fix "Design issues with the user details" for AutoReset due to Limitations with AD groups Page.
- 03:12 PM Bug #13538 (Resolved): Need to rename the the buttons and the confirmation messages
- 09:52 PM Bug #14297 (Resolved): LPA : while attaching attachment in 8D form displays error
- not able to reproduce
- 09:50 PM Bug #14270 (Resolved): In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- not able to replicate
- 09:46 PM Bug #14300 (Resolved): Attached attachment name displays in number format after attached
- not able to reproduce
- 09:40 PM Bug #14461 (In Progress): Assign Checklist-> Max and min button need to displayed in assign checklist page
- 05:49 PM Bug #14461 (Not Fixed with Hotfix): Assign Checklist-> Max and min button need to displayed in assign checklist page
- 05:49 PM Bug #14461: Assign Checklist-> Max and min button need to displayed in assign checklist page
- Still the issue occurs
- 09:40 PM Bug #14398 (Resolved): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- 09:40 PM Bug #14453 (Resolved): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- Not able to replicate. if get this issue inform us to fix immediately
- 09:29 PM Bug #14455 (Resolved): When tried to enter Department name manually in 5why form of 7D approach displays error
- 09:20 PM Bug #14388: Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- ADD button is not applicable for WidgetPreferences
- 09:18 PM Bug #14370 (Resolved): Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select the country,state and city !!" though country is selected
- 09:17 PM Bug #14383 (Resolved): Search is not working in Widget settings either by using search window or else through search grid
- 08:12 PM Bug #14302 (Resolved): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 02:51 PM Bug #14302 (Not Fixed with Hotfix): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 11:35 AM Bug #14302 (Resolved): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 10:52 AM Bug #14302 (In Progress): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 08:12 PM Bug #14316 (Resolved): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 03:09 PM Bug #14316 (Not Fixed with Hotfix): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- Child of the External elements are not allowed to expand
- 11:35 AM Bug #14316 (Resolved): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 08:07 PM Bug #14308 (Resolved): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 07:58 PM Bug #14317 (Fixed with Hotfix): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 04:54 PM Bug #14317 (Resolved): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 03:25 PM Bug #14317 (Not Fixed with Hotfix): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- After Expand and Collapse is done context menu is opening at random areas
- 11:35 AM Bug #14317 (Resolved): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 07:57 PM Bug #14336 (Fixed with Hotfix): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- 04:46 PM Bug #14336 (Resolved): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- this not fixed
- 03:38 PM Bug #14336 (Not Fixed with Hotfix): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- First element is displayed partially in Process VDA- Structure Analysis
- 12:48 PM Bug #14336 (Resolved): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- 07:56 PM Bug #14301 (Fixed with Hotfix): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 04:57 PM Bug #14301 (Resolved): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 02:47 PM Bug #14301 (Not Fixed with Hotfix): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- Context menu options for Cause is not working.
- 11:05 AM Bug #14301 (Resolved): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 07:52 PM Bug #14449 (Resolved): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 07:09 PM Bug #14449 (In Progress): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 05:27 PM Bug #14449 (Not Resolved): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 11:08 AM Bug #14449 (Resolved): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 10:51 AM Bug #14449 (In Progress): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 07:42 PM Bug #14275 (Resolved): SB-190910324 In similar concern pop up Cancel button is not working.
- 06:26 PM Bug #14296 (Resolved): Auditee response/Report: Date of audit is not displayed in Auditee response report
- Duplicate issue #14096
- 06:25 PM Bug #14415 (Resolved): In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- 06:25 PM Bug #14434 (Resolved): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 06:24 PM Bug #14480 (Resolved): Dont display Supplier in any of the user selection part.
- 09:56 AM Bug #14480 (Open): Dont display Supplier in any of the user selection part.
- 06:22 PM Bug #14452 (Resolved): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 02:52 PM Bug #14452 (WAD): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 06:20 PM Bug #14264 (Resolved): Problem on Level Creation as Administrator
- 06:20 PM Bug #14474 (Resolved): Master tag folder allows to save and Delete blank space field
- 06:20 PM Bug #14350 (Resolved): NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clciking on "Submit to auditee" button
- 06:04 PM Bug #14325 (Fixed with Hotfix): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- Verified in Cycle2 in 21/10.2019
- 05:57 PM Bug #14444 (Fixed with Hotfix): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- 05:57 PM Bug #14444: Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- Verified in cycle 2 21/10/2019
- 05:49 PM Bug #14267 (Resolved): Clicking on track project in SCAR form shows empty page.
- 05:48 PM Bug #14265 (Resolved): The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- 05:47 PM Bug #14337 (Fixed with Hotfix): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- 05:32 PM Bug #14337 (Resolved): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- 05:30 PM Bug #14298 (Resolved): Process VDA - There is no option to add Severity for the added Effect.
- 02:21 PM Bug #14298 (Not Fixed with Hotfix): Process VDA - There is no option to add Severity for the added Effect.
- 11:35 AM Bug #14298 (Resolved): Process VDA - There is no option to add Severity for the added Effect.
- 10:52 AM Bug #14298 (In Progress): Process VDA - There is no option to add Severity for the added Effect.
- 05:27 PM Bug #14467 (Fixed with Hotfix): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- Clauses is displayed.Verified in cycle2 905 on 21/10/2019
- 01:09 PM Bug #14467 (Resolved): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- Resolved in hotfix
- 05:25 PM Bug #14473 (Resolved): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 04:05 PM Bug #14473 (Not Fixed with Hotfix): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 11:34 AM Bug #14473 (Resolved): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 05:25 PM Bug #14408 (Resolved): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 04:02 PM Bug #14408 (Not Fixed with Hotfix): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 11:34 AM Bug #14408 (Resolved): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 05:21 PM Bug #14387 (Resolved): Suite: First name,middle name,last name separation is not valid
- 05:16 PM Bug #14435 (Closed): Both IE & Chrome: All the PI Names displaying as "Edit Element"
- 05:15 PM Bug #14435 (Fixed with Hotfix): Both IE & Chrome: All the PI Names displaying as "Edit Element"
- 05:00 PM Bug #14410 (Resolved): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 04:53 PM Bug #14410 (In Progress): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 04:37 PM Bug #14410 (Not Resolved): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 11:08 AM Bug #14410 (Resolved): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 10:51 AM Bug #14410 (In Progress): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 04:45 PM Bug #14440 (Closed): Template1->We are not able to enter the Score value in Template 1
- 04:45 PM Bug #14440: Template1->We are not able to enter the Score value in Template 1
- okay.Closed this issues
- 04:38 PM Bug #14277 (Not Resolved): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 11:04 AM Bug #14277 (Resolved): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 04:37 PM Bug #14390 (Not Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 11:35 AM Bug #14390 (Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 10:49 AM Bug #14390 (In Progress): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 04:19 PM Bug #14281 (Fixed with Hotfix): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- Verified in Cycle2 on 21/10/2019
- 04:09 PM Bug #14321 (Fixed with Hotfix): Header for Focus Element is displayed as Topic Element
- 11:08 AM Bug #14321 (Resolved): Header for Focus Element is displayed as Topic Element
- 10:51 AM Bug #14321 (In Progress): Header for Focus Element is displayed as Topic Element
- 03:36 PM Bug #14481: Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- Notify administrator new document creation please check this as well
- 02:51 PM Bug #14481 (WAD): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 03:31 PM Bug #14328 (Fixed with Hotfix): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- 12:49 PM Bug #14328 (Resolved): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- Fixed and patches ready for testing
- 03:30 PM Bug #14324 (Fixed with Hotfix): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 11:05 AM Bug #14324 (Resolved): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 03:13 PM Bug #14439 (Resolved): Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision as A in email
- 03:12 PM Bug #14341 (Resolved): Project and supplier icon is not listed in the System tree view for the program
- 02:59 PM Bug #14312 (Fixed with Hotfix): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 11:05 AM Bug #14312 (Resolved): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 02:50 PM Bug #14459 (Resolved): LPA : Submit button is available even after finding is closeout bu auditor
- Duplicate Issue :#14308
- 02:50 PM Bug #14431 (Fixed with Hotfix): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- 02:48 PM Bug #14427 (Fixed with Hotfix): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- 10:04 AM Bug #14427 (Resolved): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- 02:47 PM Bug #14464 (Resolved): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- verify in next build patch needs to move
- 02:33 PM Bug #14425 (Fixed with Hotfix): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- 02:15 PM Bug #14447 (Fixed with Hotfix): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- 11:07 AM Bug #14447 (Resolved): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- 02:14 PM Bug #14494 (Fixed with Hotfix): Process VDA: Process Flow Tool Tip is displaying wrongly
- 11:07 AM Bug #14494 (Resolved): Process VDA: Process Flow Tool Tip is displaying wrongly
- 02:12 PM Bug #14289 (Fixed with Hotfix): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- 12:46 PM Bug #14289 (Resolved): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- Fixed and patches ready for testing
- 02:04 PM Bug #14373 (Resolved): Entity->Assign process->While copying process from one entity to another entity while paste does not display hand icon
- 01:35 PM Bug #14477 (Resolved): VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- Verified as hotfix
- 12:32 PM Bug #14477: VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- Perform VAM audit
Go to corrective action close out->Click on view/edit checklists
Observe,
No checklists found is... - 01:25 PM Bug #14500 (Resolved): (Multi Browser - Chrome) Process VDA - Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- 09:56 AM Bug #14500 (Open): (Multi Browser - Chrome) Process VDA - Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- 01:20 PM Bug #14493 (Resolved): Multi Browser(Chrome & Firefox) - Design VDA - system displays the Context element as selected while opening Functional/Failure Analysis
- 09:56 AM Bug #14493 (Open): Multi Browser(Chrome & Firefox) - Design VDA - system displays the Context element as selected while opening Functional/Failure Analysis
- 12:37 PM Bug #14320 (In Progress): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 12:36 PM Bug #14266 (Fixed with Hotfix): Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- 12:35 PM Bug #14457 (Resolved): Multi site->Audit program: Remove this alert message for clause in multi site
- Need to discuss with Bijoy
- 12:34 PM Bug #14284 (In Progress): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- 11:34 AM Bug #14421 (Resolved): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 11:33 AM Bug #14484 (Resolved): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 11:31 AM Bug #14484 (In Progress): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 11:30 AM Bug #14466 (Resolved): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Check after the build
- 11:08 AM Bug #14495 (Resolved): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- 10:51 AM Bug #14495 (In Progress): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- 11:08 AM Bug #14479 (Resolved): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- 10:51 AM Bug #14479 (In Progress): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- 11:08 AM Bug #14417 (Resolved): Label must be renamed as SEooC instead of SEOOC
- 10:51 AM Bug #14417 (In Progress): Label must be renamed as SEooC instead of SEOOC
- 11:06 AM Bug #14384 (Resolved): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 10:22 AM Bug #14210 (Closed): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 09:56 AM Bug #14498 (Open): Not able to create a Supplier PPAP program for a supplier with one part to different location
- 09:56 AM Bug #14483 (Open): Not able to attach draft document using special characters in file and document name
10/20/2019
- 05:56 PM Bug #14323 (Resolved): When trying to delete the document from the ECN form then in the prompt it shows "error" before the alert message.
- 05:56 PM Bug #14392 (Resolved): When the ECR form is submitted for approval then the requestor and approver can able to delete the documents which are already requested. It should not allow to delete the document request
- 05:28 PM Bug #14409 (Resolved): Even after rejection also the ECR form window is not closing and the change document request action is not removed for the user also
- 11:37 AM Bug #14433 (Resolved): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- 11:37 AM Bug #14428 (Resolved): LPA :Holiday alert is not displayed when selected the day which is holiday
10/19/2019
- 11:42 PM Bug #14388 (Resolved): Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- 10:44 PM Bug #14404 (Resolved): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 10:00 PM Bug #14276 (Resolved): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 10:00 PM Bug #14274 (Resolved): Groups: When creating a new group, By default view documents rights should be checked
- 10:00 PM Bug #14253 (Resolved): Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- 10:00 PM Bug #14281 (Resolved): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- 09:58 PM Bug #14376 (Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 09:58 PM Bug #14371 (Resolved): Entity->Assign process window does not displays Labels with same size on X and Y axis
- 09:57 PM Bug #14469 (Resolved): Shift status is changing without save
- 09:54 PM Bug #14468 (Resolved): Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- 04:48 PM Bug #14461 (Resolved): Assign Checklist-> Max and min button need to displayed in assign checklist page
- Faced UI issue in it need to check
- 03:16 PM Bug #14446 (Resolved): LPA : Mandatory auditee response is not working as expected for OFI
- 12:37 PM Bug #14343 (Resolved): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
10/18/2019
- 07:25 PM Bug #14479 (Open): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- 03:03 PM Bug #14479 (Closed): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- Issue occurs except in IE Browser.
- 07:24 PM Bug #14484 (Open): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 03:58 PM Bug #14484 (Closed): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 07:20 PM Bug #14494 (Open): Process VDA: Process Flow Tool Tip is displaying wrongly
- 04:56 PM Bug #14494 (Closed): Process VDA: Process Flow Tool Tip is displaying wrongly
- In Process VDA, the Process Flow Tool Tip is displaying as Structure Analysis but actually it should be display as Pr...
- 07:20 PM Bug #14495 (Open): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- 05:18 PM Bug #14495 (Closed): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- System does not display Text field in Table view to add Function/Requirement/Failure
- 07:10 PM Bug #14473 (In Progress): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 02:09 PM Bug #14473 (Open): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 12:52 PM Bug #14473 (Closed): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- Need to restrict parent under Child elements
- 06:37 PM Bug #14398 (In Progress): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- 06:20 PM Bug #14500 (Closed): (Multi Browser - Chrome) Process VDA - Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- 05:55 PM Bug #14498 (Closed): Not able to create a Supplier PPAP program for a supplier with one part to different location
- Not able to create a Supplier PPAP program for a supplier with one part to different location(one part-One plant-2 di...
- 05:51 PM Bug #14470 (Resolved): Not able to replicate:Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its showing attach rights and the inherit is checked , but dont know how the rights has been set
- 02:08 PM Bug #14470 (Open): Not able to replicate:Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its showing attach rights and the inherit is checked , but dont know how the rights has been set
- 11:38 AM Bug #14470 (Closed): Not able to replicate:Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its showing attach rights and the inherit is checked , but dont know how the rights has been set
- Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its show...
- 05:51 PM Bug #14425 (Resolved): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- Fixed and patches ready for testing
- 05:51 PM Bug #14431 (Resolved): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- Fixed and patches ready for testing
- 05:36 PM Bug #14316 (In Progress): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 05:36 PM Bug #14408 (In Progress): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 05:35 PM Bug #14421 (In Progress): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 05:33 PM Bug #14427: Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- Kindly help us on this
- 05:33 PM Bug #14435: Both IE & Chrome: All the PI Names displaying as "Edit Element"
- Not an issue working as expected
- 05:28 PM Bug #14482 (Resolved): Change Management- When the Requester and responsible person is same then the document change email notification is not generating
- 05:28 PM Bug #14482 (Open): Change Management- When the Requester and responsible person is same then the document change email notification is not generating
- 03:22 PM Bug #14482 (Closed): Change Management- When the Requester and responsible person is same then the document change email notification is not generating
- When the Requester and responsible person is same then the document change email notification is not generating
- 05:25 PM Bug #14481: Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- WAD
- 05:22 PM Bug #14481 (Open): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 03:21 PM Bug #14481 (Closed): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- Notify administrator to assign a route for pending request and
Notify administrator to assign document attachment f... - 05:25 PM Bug #14443 (Resolved): Multilanguage:Customize email message:User should customize language specific emails. The content customize in English should not be reflected for all languages
- 05:24 PM Bug #14476 (Resolved): Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supplier users irrespective of doc pro settings level selection
- 02:07 PM Bug #14476 (Open): Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supplier users irrespective of doc pro settings level selection
- 01:09 PM Bug #14476 (Closed): Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supplier users irrespective of doc pro settings level selection
- Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supp...
- 05:23 PM Bug #14203 (Resolved): When entering document name with special character then it shows different alert. Show common alert when the special characters are not accepted.Same for file name which has spl char(Attached the doc for ref))
- for attaching document name contains special characters is working as expected.
- 04:58 PM Bug #14475 (Resolved): Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
- 02:08 PM Bug #14475 (Open): Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
- 01:00 PM Bug #14475 (Closed): Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
- Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
The Created Supplier ... - 04:55 PM Bug #14477: VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- update the steps you did to replicate the scenario. From your step to reproduce i cannot able to replicate
- 02:09 PM Bug #14477 (Open): VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- 01:55 PM Bug #14477 (Closed): VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting di...
- 04:54 PM Bug #14277 (In Progress): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 04:48 PM Bug #14493 (Closed): Multi Browser(Chrome & Firefox) - Design VDA - system displays the Context element as selected while opening Functional/Failure Analysis
- system displays the Context element as selected while opening Functional/Failure Analysis
- 04:48 PM Bug #14384 (In Progress): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 04:45 PM Bug #14426 (Resolved): LPA: Time Period as "month" should not allow to select Past months from the Calendar month selection
- Not an issue. Please close this issue. You are selecting in 2019. LPA didn't allow for past days from current day.
- 04:42 PM Bug #14414 (Resolved): Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- Production line is combination of assembly and manufacturing line. Not an issue
- 04:39 PM Bug #14447 (In Progress): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- 04:32 PM Bug #14440 (Resolved): Template1->We are not able to enter the Score value in Template 1
- Duplicate Issue :Bug #14401
- 04:31 PM Bug #14401 (Resolved): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- Verify after this build
- 04:23 PM Bug #14324 (In Progress): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 03:51 PM Bug #14442 (Resolved): LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- Verify after build
- 10:05 AM Bug #14442: LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- 1)Login to module as auditor
2)Click on perform audit
3)Click on Upload audit record
4)Click on assign checklist
... - 03:30 PM Bug #14483 (Closed): Not able to attach draft document using special characters in file and document name
- Not able to attach draft document using special characters in file and document name- page keeps on loading
- 03:21 PM Bug #14480 (Closed): Dont display Supplier in any of the user selection part.
- Dont display Supplier in any of the user selection part.
- 02:55 PM Bug #14452: When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- Document name is a link and the system will take it as an html. this cannot be fixed or an escape character cannot be...
- 02:09 PM Bug #14468 (Open): Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- 10:17 AM Bug #14468 (Closed): Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- 02:08 PM Bug #14469 (Open): Shift status is changing without save
- 10:28 AM Bug #14469 (Closed): Shift status is changing without save
- Shift status is changing without save meaning status is displaying as Red color
- 02:08 PM Bug #14474 (Open): Master tag folder allows to save and Delete blank space field
- 12:53 PM Bug #14474 (Closed): Master tag folder allows to save and Delete blank space field
- Master tag folder allows to save and Delete blank space field
- 02:08 PM Bug #14471 (Open): Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- 11:57 AM Bug #14471 (Closed): Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- 01:02 PM Bug #14428 (In Progress): LPA :Holiday alert is not displayed when selected the day which is holiday
- 11:56 AM Bug #14366 (Resolved): When the document name contains special character then selecting the document for the change request - No Response
- 11:56 AM Bug #14362 (Resolved): Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request status as "Incomplete"
- 11:56 AM Bug #14352 (Resolved): CM: Before the ECR form gets approve the Change request actions are listed for the Responsibility person.
- 11:56 AM Bug #14329 (Resolved): Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
- 11:56 AM Bug #14294 (Resolved): While approving the respective action in approver login displays dual window after approver
- 11:56 AM Bug #13905 (Resolved): When Project is not selected and from project listing and initiating change request from APQP (With approval) is not working.
- 11:26 AM Bug #14345 (Resolved): Supplier -> Spell mistake in various pages / Content change in alert message
- 11:16 AM Bug #14433 (In Progress): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- 10:27 AM Bug #14423 (Resolved): LPA : Drop down button need to be displayed on RHS for the Checkpoints
- 10:24 AM Bug #14423 (In Progress): LPA : Drop down button need to be displayed on RHS for the Checkpoints
10/17/2019
- 09:27 PM Bug #14457 (In Progress): Multi site->Audit program: Remove this alert message for clause in multi site
- 07:52 PM Bug #14457 (Open): Multi site->Audit program: Remove this alert message for clause in multi site
- 05:42 PM Bug #14457 (Closed): Multi site->Audit program: Remove this alert message for clause in multi site
- Multi site->Audit program: Remove this alert message for clause in multi site
- 08:12 PM Bug #14278 (Resolved): LPA : while creating equipment under manufacturing line displays error
- Not able to replicate
- 08:00 PM Bug #14282 (Closed): LPA : Changed responsible person person is not displaying in audit report for findings
- Duplicate issue. Closed
- 08:00 PM Bug #14420 (Closed): Checkpoint names are getting duplicated in filling checklist screen
- 07:59 PM Bug #14420: Checkpoint names are getting duplicated in filling checklist screen
- Description data is getting displayed. issue closed
- 07:58 PM Bug #14429 (Closed): LPA : Date is not getting changed when Start date and End date is changed for particular scheduled cell and saved
- Duplicate issue . Closed
- 03:09 PM Bug #14429 (Resolved): LPA : Date is not getting changed when Start date and End date is changed for particular scheduled cell and saved
- Duplicate Issue #14433 : While Saving from cell Not working
- 02:13 PM Bug #14429 (Open): LPA : Date is not getting changed when Start date and End date is changed for particular scheduled cell and saved
- 12:39 PM Bug #14429 (Closed): LPA : Date is not getting changed when Start date and End date is changed for particular scheduled cell and saved
- 07:57 PM Bug #14445 (Closed): LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- Double confirmation. Issue closed
- 07:57 PM Bug #14445 (Fixed with Hotfix): LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- 03:46 PM Bug #14445 (Open): LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- 03:11 PM Bug #14445: LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- Waring alert. It does not says confirm or not confirm. It says there is a possibility.
- 02:39 PM Bug #14445 (Closed): LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- Removing checklist is displaying unwanted alert in Fill checklist screen
- 07:52 PM Bug #14467 (Open): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- 07:31 PM Bug #14467 (Closed): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- Perform Audit-> Template 1->Clauses number need to displayed in Template 1 reports
- 07:52 PM Bug #14466 (Open): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- 07:24 PM Bug #14466 (Closed): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO"...
- 07:52 PM Bug #14464 (Open): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- 06:59 PM Bug #14464 (Closed): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- 07:52 PM Bug #14463 (Open): Remainder/Escalation mail -> effectiveness -> Count display is incorrect. I have verified and validation only one finding but it show 3 finding in content
- 06:39 PM Bug #14463 (Closed): Remainder/Escalation mail -> effectiveness -> Count display is incorrect. I have verified and validation only one finding but it show 3 finding in content
- Remainder/Escalation mail -> effectiveness -> Mail content count display is incorrect. I have verified and validation...
- 07:52 PM Bug #14461 (Open): Assign Checklist-> Max and min button need to displayed in assign checklist page
- 06:05 PM Bug #14461 (Closed): Assign Checklist-> Max and min button need to displayed in assign checklist page
- Assign Checklist-> Max and min button need to displayed in assign checklist page
- 07:52 PM Bug #14459 (Open): LPA : Submit button is available even after finding is closeout bu auditor
- 05:54 PM Bug #14459 (Closed): LPA : Submit button is available even after finding is closeout bu auditor
- Submit button is available even after finding is closeout by auditor
Displays submit button when Only Verification... - 07:52 PM Bug #14458 (Open): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- 05:43 PM Bug #14458 (Closed): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- Search Inspection Entry: Inprocess Inspection sheet is not displaying
Shows No data found - 05:52 PM Bug #14411 (Resolved): Page is not responding when clicked on save in Audit assign screen
- 05:11 PM Bug #14456 (Open): Reports: In the PI field its displaying the PI name as 2 times
- 05:09 PM Bug #14456 (Closed): Reports: In the PI field its displaying the PI name as 2 times
- In the PI field its displaying the PI name as 2 times
- 05:11 PM Bug #14455 (Open): When tried to enter Department name manually in 5why form of 7D approach displays error
- 05:08 PM Bug #14455 (Closed): When tried to enter Department name manually in 5why form of 7D approach displays error
- When tried to enter Department name manually in 5why form of 7D approach displays error
- 05:11 PM Bug #14454 (Open): Reports: Reports is not displaying as User Specific
- 05:06 PM Bug #14454: Reports: Reports is not displaying as User Specific
- This Issue is missed by QA
- 05:01 PM Bug #14454 (Closed): Reports: Reports is not displaying as User Specific
- If the User A Published a PI and in the Reports User A only can be viewed other users it should not show but now that...
- 05:11 PM Bug #14453 (Open): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- 04:58 PM Bug #14453 (Closed): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- Audit schedule-> Unwanted image is displayed below the page after schedule created.
- 04:43 PM Bug #14356 (Resolved): Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- verify after next build
- 04:43 PM Bug #14403 (Resolved): AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- Verify after Next build
- 04:40 PM Bug #14402 (Resolved): Multi Site: Duplicate equipment are displaying in LPA schedule screen
- Verify after next build
- 04:12 PM Bug #14448 (Resolved): Checklist page-> Minus value are displayed in Score value text box box
- It will Show as Not applicable while retrieving checklist when you enter character
- 03:46 PM Bug #14448 (Open): Checklist page-> Minus value are displayed in Score value text box box
- 02:57 PM Bug #14448 (Closed): Checklist page-> Minus value are displayed in Score value text box box
- input value as A,b...
- 04:07 PM Bug #14326 (Resolved): Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- verify After This build
- 04:05 PM Bug #14359 (Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- Check After This build
- 04:05 PM Bug #14361 (Resolved): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- Check After This build
- 10:36 AM Bug #14361 (In Progress): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- 10:32 AM Bug #14361 (Not Resolved): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- @ Boopathi: You have attached corrective action satisfactory email. But issue on
Email Link from Findings Effective... - 04:05 PM Bug #14245 (Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Check After This build
- 04:05 PM Bug #14407 (Resolved): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Check After this build
- 04:01 PM Bug #14407 (In Progress): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- 04:04 PM Bug #14422 (Resolved): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- Check After this build
- 03:46 PM Bug #14452 (Open): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 03:43 PM Bug #14452 (Closed): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- When the document name and number has special characters like "<Test document>" then its not displaying the document...
- 03:46 PM Bug #14449 (Open): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 03:05 PM Bug #14449 (Closed): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to d...
- 03:46 PM Bug #14447 (Open): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- 02:57 PM Bug #14447 (Closed): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- Design VDA, Function/Failure Analysis for the Opened Window Header of Add Function, Add Requirement, Add Failure is d...
- 03:46 PM Bug #14446 (Open): LPA : Mandatory auditee response is not working as expected for OFI
- 02:51 PM Bug #14446 (Closed): LPA : Mandatory auditee response is not working as expected for OFI
- Mandatory auditee response is not working as expected while filling for OFI while uploading ofi mandatory is auditee ...
- 03:46 PM Bug #14443 (Open): Multilanguage:Customize email message:User should customize language specific emails. The content customize in English should not be reflected for all languages
- 02:31 PM Bug #14443 (Closed): Multilanguage:Customize email message:User should customize language specific emails. The content customize in English should not be reflected for all languages
- Multi language: Customize email message:Count customize language specific emails. The content customize in English s...
- 03:45 PM Bug #14442 (Open): LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- 03:17 PM Bug #14442: LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- attached screen shot is not validated you issue
- 02:29 PM Bug #14442 (Closed): LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available afte...
- 03:04 PM Bug #14436: Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- Function Not implemented
- 02:14 PM Bug #14436 (Open): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 12:57 PM Bug #14436 (Closed): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
1)log... - 02:49 PM Bug #14444 (Resolved): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- 02:49 PM Bug #14444 (Open): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- Cannot able to replicate
- 02:35 PM Bug #14444 (Closed): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- 02:14 PM Bug #14434 (Open): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 12:53 PM Bug #14434 (Closed): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- * In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department an...
- 02:14 PM Bug #14427 (Open): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- 12:09 PM Bug #14427 (Closed): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- In the Chrome Browser, When the User tries to Open DocPro & DocPro Image Hyperlinks its displaying as Empty in the Op...
- 02:14 PM Bug #14431 (Open): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- 12:40 PM Bug #14431 (Closed): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- In Main2, When the User Opens the Production Item Operation Flow Document and the User Open the PFMEA/Process Flow/Ot...
- 02:14 PM Bug #14435 (Open): Both IE & Chrome: All the PI Names displaying as "Edit Element"
- 12:57 PM Bug #14435 (Closed): Both IE & Chrome: All the PI Names displaying as "Edit Element"
- All the PI Names displaying as "Edit Element" and its very difficult to identify the PI. This issue is occurs due to ...
- 02:14 PM Bug #14432 (Open): Findings Report ->Benchmark data is not displayed in Findings Reports.
- 12:43 PM Bug #14432 (Closed): Findings Report ->Benchmark data is not displayed in Findings Reports.
- Findings Report ->Remarks / Objective Evidence data is not displayed in Reports.
- 02:14 PM Bug #14440 (Open): Template1->We are not able to enter the Score value in Template 1
- 01:45 PM Bug #14440 (Closed): Template1->We are not able to enter the Score value in Template 1
- Template1->We are not able to enter the Score value in Template 1
- 02:13 PM Bug #14426 (Open): LPA: Time Period as "month" should not allow to select Past months from the Calendar month selection
- 11:53 AM Bug #14426 (Closed): LPA: Time Period as "month" should not allow to select Past months from the Calendar month selection
- Time Period as "month" should not allow to select Past months from the Calendar month selection because LPA Will not ...
- 02:13 PM Bug #14428 (Open): LPA :Holiday alert is not displayed when selected the day which is holiday
- 12:36 PM Bug #14428 (Closed): LPA :Holiday alert is not displayed when selected the day which is holiday
- Holiday alert is not displayed when selected the day which is holiday and even date is not selecting either
- 02:12 PM Bug #14433 (Open): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- 12:43 PM Bug #14433 (Closed): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- 02:11 PM Bug #14437 (Open): Inprocess Inspection sheet is not opening from supervisor approval menu
- 01:01 PM Bug #14437 (Closed): Inprocess Inspection sheet is not opening from supervisor approval menu
- Inprocess Inspection sheet is not opening from supervisor approval menu,Shows No data found
- 02:07 PM Bug #14439 (Open): Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision as A in email
- 01:24 PM Bug #14439 (Closed): Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision as A in email
- Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision a...
- 11:54 AM Bug #14425 (Open): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- 11:52 AM Bug #14425 (Closed): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- 11:33 AM Bug #14423 (Open): LPA : Drop down button need to be displayed on RHS for the Checkpoints
- 10:56 AM Bug #14423 (Closed): LPA : Drop down button need to be displayed on RHS for the Checkpoints
- Drop down button need to be displayed on RHS for the Checkpoints
10/16/2019
- 09:41 PM Bug #14360 (Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 09:24 PM Bug #14396 (Resolved): Multi Site : Layer creation is not displaying all the modes available displays only Shift mode
- 05:08 PM Bug #14396 (Open): Multi Site : Layer creation is not displaying all the modes available displays only Shift mode
- 03:10 PM Bug #14396 (Closed): Multi Site : Layer creation is not displaying all the modes available displays only Shift mode
- Layer creation is not displaying all the modes available displays only Shift mode
- 09:14 PM Bug #14359 (In Progress): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 08:08 PM Bug #14252 (Resolved): Process Activities ->Unassigned site name is displayed for a process
- Not Replicated
- 07:46 PM Bug #14420 (Resolved): Checkpoint names are getting duplicated in filling checklist screen
- How many times will replay on same requirement.
- 06:40 PM Bug #14420 (Open): Checkpoint names are getting duplicated in filling checklist screen
- 06:10 PM Bug #14420 (Closed): Checkpoint names are getting duplicated in filling checklist screen
- Checkpoint names are getting duplicated in filling checklist screen
- 07:42 PM Bug #14422 (In Progress): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- Not a Show Stopper Issue
- 06:40 PM Bug #14422 (Open): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- 06:22 PM Bug #14422 (Closed): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- 06:41 PM Bug #14417 (Open): Label must be renamed as SEooC instead of SEOOC
- 05:49 PM Bug #14417 (Closed): Label must be renamed as SEooC instead of SEOOC
- Label must be renamed as SEooC instead of SEOOC
- 06:41 PM Bug #14421 (Open): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 06:19 PM Bug #14421 (Closed): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- In Aqua Pro,RFD and FST including Global PI is displayed as Edited PI.
- 06:40 PM Bug #14415 (Open): In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- 05:43 PM Bug #14415 (Closed): In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- * In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- 06:40 PM Feature/Enhancement #14413 (Open): Supplier portal module should be display in social media
- 05:30 PM Feature/Enhancement #14413 (Open): Supplier portal module should be display in social media
- Supplier portal module should be display in social media
- 06:40 PM Bug #14414 (Open): Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- 05:43 PM Bug #14414 (Closed): Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- 06:40 PM Bug #14412 (Open): After working on the programs in the nested view the gantt page getting blank
- 05:25 PM Bug #14412 (Closed): After working on the programs in the nested view the gantt page getting blank
- After working on the programs in the nested view the Gantt page getting blank . Working fine in the tree view
- 06:40 PM Bug #14416 (Open): The task rating color is not compatable with the text color of %completion option
- 05:45 PM Bug #14416 (Closed): The task rating color is not compatable with the text color of %completion option
- IN the Gantt page while updating task rating to dark colors the %completion is not viewable.
- 06:39 PM Bug #14418 (Open): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- 05:57 PM Bug #14418 (Not Resolved): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- The existing parts added to a program via BOM import got listed again in the aqua tree separately under the part fami...
- 05:53 PM Bug #14245 (In Progress): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:52 PM Bug #14279 (Resolved): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- Verify after Build
- 05:52 PM Bug #14286 (Resolved): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- Verify after Build
- 05:52 PM Bug #14307 (Resolved): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- Verify after Build
- 05:52 PM Bug #14313 (Resolved): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- Verify after Build
- 05:52 PM Bug #14311 (Resolved): Effectiveness for findings: Audit programs effective due days are not saving
- Verify after patch release
- 05:51 PM Bug #14258 (Resolved): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- Verify after patch release
- 05:51 PM Bug #14271 (Resolved): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- Verify after patch release
- 05:51 PM Bug #14355 (Resolved): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- Verify after Build
- 05:51 PM Bug #14325 (Resolved): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- Verify after patch release
- 05:51 PM Bug #14327 (Resolved): Email for Effectiveness For Findings->Some fields are missing in emails content
- Verify after patch release
- 04:41 PM Bug #14327 (In Progress): Email for Effectiveness For Findings->Some fields are missing in emails content
- 05:50 PM Bug #14353 (Resolved): Email for Effectiveness For Findings -> Email subject is wrong.
- Verify after patch release
- 05:50 PM Bug #14354 (Resolved): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- Verify after patch release
- 05:29 PM Bug #14319 (Resolved): In Program - Deliverable name is not displayed in the risk register.
- 05:23 PM Bug #14411 (Open): Page is not responding when clicked on save in Audit assign screen
- 05:19 PM Bug #14411 (Closed): Page is not responding when clicked on save in Audit assign screen
- Page is not responding when clicked on save in Audit assign screen and also when deleted page is getting hanged
- 05:23 PM Bug #14384 (Open): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 12:42 PM Bug #14384 (Closed): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 05:23 PM Bug #14390 (Open): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 02:02 PM Bug #14390 (Closed): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- Tree diagram: where ever we do right click on tree diagram system opens context menu
Issue occurs in VDA/FST - 05:22 PM Bug #14410 (Open): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 05:04 PM Bug #14410 (Closed): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 05:22 PM Bug #14408 (Open): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 05:01 PM Bug #14408 (Closed): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the...
- 05:22 PM Bug #14387 (Open): Suite: First name,middle name,last name separation is not valid
- 01:00 PM Bug #14387 (Closed): Suite: First name,middle name,last name separation is not valid
- Suite: First name,middle name,last name separation is not valid
- 05:22 PM Bug #14368 (Open): For the concerns created from IC, without making any changes in concern form asks " New Concern form for category and sub category has been changed. Do you want new form changes?"
- 10:20 AM Bug #14368 (Closed): For the concerns created from IC, without making any changes in concern form asks " New Concern form for category and sub category has been changed. Do you want new form changes?"
- For the concerns created from IC, without making any changes in concern form asks " New Concern form for category an...
- 05:22 PM Bug #14381 (Open): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- 12:18 PM Bug #14381 (Closed): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not g...
- 05:21 PM Bug #14400 (Open): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 03:32 PM Bug #14400 (Closed): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- The close button in track project is getting hidden sometime and user cant able to close it using close icon. This ha...
- 05:21 PM Bug #14367 (Open): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 10:16 AM Bug #14367 (Closed): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in ...
- 05:20 PM Bug #14379 (Open): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
- 12:04 PM Bug #14379 (Closed): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
- 05:20 PM Bug #14382 (Open): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- 12:22 PM Bug #14382 (Closed): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the ...
- 05:20 PM Bug #14391 (Open): When creating a program using Master Template then the added supplier project is not listed in the Vendor view as well as for SQE , SQM and Supplier contact person.
- 02:04 PM Bug #14391 (Closed): When creating a program using Master Template then the added supplier project is not listed in the Vendor view as well as for SQE , SQM and Supplier contact person.
- When creating a program using Master Template then the added supplier project is not listed in the Vendor view as wel...
- 05:19 PM Bug #14392 (Open): When the ECR form is submitted for approval then the requestor and approver can able to delete the documents which are already requested. It should not allow to delete the document request
- 02:24 PM Bug #14392 (Closed): When the ECR form is submitted for approval then the requestor and approver can able to delete the documents which are already requested. It should not allow to delete the document request
- 05:19 PM Bug #14405 (Open): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 04:30 PM Bug #14405 (Closed): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- for the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 05:19 PM Bug #14409 (Open): Even after rejection also the ECR form window is not closing and the change document request action is not removed for the user also
- 05:02 PM Bug #14409 (Closed): Even after rejection also the ECR form window is not closing and the change document request action is not removed for the user also
- Even after rejection also the ECR form window is not closing and the change document request action is not removed fo...
- 05:18 PM Bug #14401 (Open): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- 03:33 PM Bug #14401 (Closed): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- 05:18 PM Bug #14403 (Open): AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- 03:44 PM Bug #14403 (Closed): AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- 05:17 PM Bug #14407 (Open): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- 04:55 PM Bug #14407 (Closed): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
Impact:
need to f... - 05:17 PM Bug #14370 (Open): Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select the country,state and city !!" though country is selected
- 10:39 AM Bug #14370 (Closed): Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select the country,state and city !!" though country is selected
- Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select ...
- 05:17 PM Bug #14371 (Open): Entity->Assign process window does not displays Labels with same size on X and Y axis
- 10:46 AM Bug #14371 (Closed): Entity->Assign process window does not displays Labels with same size on X and Y axis
- Entity->Assign process window does not displays Labels with same size on X and Y axis
- 05:16 PM Bug #14373 (Open): Entity->Assign process->While copying process from one entity to another entity while paste does not display hand icon
- 10:57 AM Bug #14373 (Closed): Entity->Assign process->While copying process from one entity to another entity while paste does not display hand icon
- Entity->Assign process->While copying process from one entity to another entity while paste does not display hand ico...
- 05:13 PM Bug #14198 (Closed): Process VDA - Structure Analysis - Server error is displayed while selecting Create Operation and FourM Categories.
- Closed in SP915 Cycle 2
- 05:09 PM Bug #14376 (Open): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 11:37 AM Bug #14376 (Closed): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 05:09 PM Bug #14383 (Open): Search is not working in Widget settings either by using search window or else through search grid
- 12:40 PM Bug #14383 (Closed): Search is not working in Widget settings either by using search window or else through search grid
- Search is not working in Widget settings either by using search window or else through search grid
- 05:09 PM Feature/Enhancement #14385 (Open): User log->when session is expired system is not considering the logout time
- 12:47 PM Feature/Enhancement #14385 (In Progress): User log->when session is expired system is not considering the logout time
- User log->when session is expired system is not considering the logout time
- 05:09 PM Bug #14388 (Open): Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- 01:03 PM Bug #14388 (Closed): Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- 05:08 PM Bug #14398 (Open): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- 03:27 PM Bug #14398 (Closed): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- Layer creation screen is not allowing to select the Route from the Assign route Drop down though approval process is ...
- 05:04 PM Bug #14402 (Open): Multi Site: Duplicate equipment are displaying in LPA schedule screen
- 03:43 PM Bug #14402 (Closed): Multi Site: Duplicate equipment are displaying in LPA schedule screen
- Duplicate equipment are displaying in LPA schedule screen
Same is replicating to single site Corporate also - 05:04 PM Bug #13957 (Open): Under My deliverable list Navigate Menu is not showing for Supplier PPAP
- 05:03 PM Bug #14380 (Open): The document viewer publish is not working getting object reference not set error
- 12:13 PM Bug #14380 (Closed): The document viewer publish is not working getting object reference not set error
- The document viewer publish is not working getting object reference error. After clicking on OK published successfull...
- 05:02 PM Bug #14389 (Open): Linking supplier primary contact responsible for all tasks is not working
- 01:09 PM Bug #14389 (Closed): Linking supplier primary contact responsible for all tasks is not working
- Linking supplier primary contact responsible for all tasks is not working for the below scenario's.
1. Program BOM i... - 05:01 PM Bug #14397 (Open): Switching between programs not working for Supplier PPAP &AQPQ
- 03:11 PM Bug #14397 (Closed): Switching between programs not working for Supplier PPAP &AQPQ
- Switching between programs not working for Supplier PPAP (Enabled nested view for program)
- 04:59 PM Bug #14404 (Open): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 03:54 PM Bug #14404 (Closed): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
User ... - 02:49 PM Bug #14317 (In Progress): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 11:00 AM Bug #14361 (Resolved): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- not able to replicate
- 10:24 AM Bug #14329: Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
Comment from Varadaraj : get the session value while entering in to action management
and set the same session va...
10/15/2019
- 07:57 PM Bug #14301 (In Progress): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 07:57 PM Bug #14312 (In Progress): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 07:00 PM Bug #14355 (In Progress): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- 06:21 PM Bug #14355 (Open): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- 05:23 PM Bug #14355 (Closed): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- 06:59 PM Bug #14353 (In Progress): Email for Effectiveness For Findings -> Email subject is wrong.
- 06:26 PM Bug #14353 (Open): Email for Effectiveness For Findings -> Email subject is wrong.
- 05:18 PM Bug #14353 (Closed): Email for Effectiveness For Findings -> Email subject is wrong.
- Email for Effectiveness For Findings -> Email subject is wrong.
The email subject is displayed as "EwQIMS - Audit... - 06:56 PM Bug #14354 (In Progress): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- 06:25 PM Bug #14354 (Open): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- 05:21 PM Bug #14354 (Closed): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminder...
- 06:45 PM Bug #14290 (Resolved): LPA : Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan waiting for approval" alert message
- 06:36 PM Bug #14366 (Open): When the document name contains special character then selecting the document for the change request - No Response
- 06:34 PM Bug #14366 (Closed): When the document name contains special character then selecting the document for the change request - No Response
- 06:27 PM Bug #14351 (Open): Report : Final Inspection and Capture History reports are not opening
- 05:11 PM Bug #14351 (Closed): Report : Final Inspection and Capture History reports are not opening
- Report : Final Inspection and Capture History reports are not opening
- 06:27 PM Bug #14337 (Open): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- 02:43 PM Bug #14337 (Closed): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- Issue 1: Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activit...
- 06:27 PM Bug #14348 (Open): Issue with Output document attachment in Document viewer after selecting "Is Output Document Required ?=No.
- 04:45 PM Bug #14348 (Closed): Issue with Output document attachment in Document viewer after selecting "Is Output Document Required ?=No.
- Clicking on the Output document attached from Document viewer after selecting "Is Output Document Required ?=No. is s...
- 06:27 PM Bug #14343 (Open): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- 03:56 PM Bug #14343: Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- Verified in SP915-CY2 on 15-10-2019
- 03:48 PM Bug #14343 (Closed): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- 06:27 PM Suggestion #14364 (Open): Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- 06:06 PM Suggestion #14364 (Closed): Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- 06:26 PM Bug #14365 (Open): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 06:11 PM Bug #14365 (Closed): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 06:26 PM Bug #14345 (Open): Supplier -> Spell mistake in various pages / Content change in alert message
- 04:14 PM Bug #14345 (Closed): Supplier -> Spell mistake in various pages / Content change in alert message
- Supplier -> Spell mistake in various pages
1. Address -> Assign address label and alert message "Please Select the... - 06:26 PM Bug #14350 (Open): NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clciking on "Submit to auditee" button
- 05:04 PM Bug #14350 (Closed): NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clciking on "Submit to auditee" button
- NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clicking on "Submit to auditee" butto...
- 06:25 PM Bug #14359 (Open): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 05:42 PM Bug #14359 (Closed): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- Closed Out -> Effectiveness Due Date field is not supporting multidate format like DD/MM/YYYY and YYYY/MM/DD
- 06:25 PM Bug #14360 (Open): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 05:46 PM Bug #14360 (Closed): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 06:25 PM Bug #14361 (Open): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- 05:53 PM Bug #14361 (Closed): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected. ...
- 06:24 PM Bug #14363 (Open): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 06:05 PM Bug #14363 (Closed): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business...
- 06:24 PM Bug #14333 (Open): Terminating the second revision document shows the document status as "Awaiting approval". (Local document and aqua document and URL Publish)
- 02:24 PM Bug #14333 (Closed): Terminating the second revision document shows the document status as "Awaiting approval". (Local document and aqua document and URL Publish)
- 06:23 PM Bug #14335 (Open): Need output document icon for the URL link attachments only for URL Link icon is missing
- 02:36 PM Bug #14335 (Closed): Need output document icon for the URL link attachments only for URL Link icon is missing
- Need output document icon for the URL link attachments only for URL Link icon is missing
- 06:23 PM Suggestion #14339 (Open): Invalid URL prompt message need to be changed. Instead of "URL Error" change it to "Please specify Valid URL"
- 02:45 PM Suggestion #14339 (Closed): Invalid URL prompt message need to be changed. Instead of "URL Error" change it to "Please specify Valid URL"
- Instead of "URL Error" change it to "Please specify Valid URL"
- 06:23 PM Bug #14341 (Open): Project and supplier icon is not listed in the System tree view for the program
- 03:23 PM Bug #14341 (Closed): Project and supplier icon is not listed in the System tree view for the program
- 06:23 PM Bug #14342 (Open): Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- 03:31 PM Bug #14342 (Closed): Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- 06:22 PM Bug #14346 (Open): Without selecting the project when change request is initiated then in the project listing screen - "Select project " prompt is displayed.
- 04:42 PM Bug #14346 (Closed): Without selecting the project when change request is initiated then in the project listing screen - "Select project " prompt is displayed.
- Without selecting the project when change request is initiated then in the project listing screen - "Select project "...
- 06:22 PM Bug #14352 (Open): CM: Before the ECR form gets approve the Change request actions are listed for the Responsibility person.
- 05:17 PM Bug #14352 (Closed): CM: Before the ECR form gets approve the Change request actions are listed for the Responsibility person.
- 06:22 PM Bug #14362 (Open): Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request status as "Incomplete"
- 05:55 PM Bug #14362 (Closed): Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request status as "Incomplete"
- Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request sta...
- 06:21 PM Bug #14357 (Open): Cant able to create Nested concern for PSD approach.
- 05:26 PM Bug #14357 (Closed): Cant able to create Nested concern for PSD approach.
- Cant able to create Nested concern for PSD approach. This happens only because the Data entered in Counter measure fi...
- 06:20 PM Bug #14356 (Open): Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- 05:24 PM Bug #14356 (Closed): Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- 06:20 PM Bug #14336 (Open): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- 02:40 PM Bug #14336 (Closed): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- Alignment for the data after clicking the Export to PNG is not good. Issue occurs in Process Structure analysis also.
- 05:56 PM Bug #14245 (Not Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:56 PM Bug #14245: Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- As discussed with Bijoy the subject and description has changed.
- 01:26 PM Bug #14245 (Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Rejecting this issue based on subject (AS per comments from Mazhar)
- 12:48 PM Bug #14245 (Not Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- As discussed with bijoy system should allow to select only one process not multiple are allowed
- 12:08 PM Bug #14245 (Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Please Discuss with Bijoy. it will effect Design
- 04:58 PM Bug #13905: When Project is not selected and from project listing and initiating change request from APQP (With approval) is not working.
- Moving from SP906 - SP915
- 04:55 PM Bug #14096: Click to view report is not displaying audit status and audit date
- view report does not display the current status of audit report after publish
- 03:29 PM Bug #14273 (Closed): LPA : Findings attachment against the checkpoints when tried to view after attached it displays a popup "Linked document with this revision is not available"
- 01:07 PM Bug #14273 (Resolved): LPA : Findings attachment against the checkpoints when tried to view after attached it displays a popup "Linked document with this revision is not available"
- Not able to replicate
- 03:29 PM Bug #14239 (Closed): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- 02:59 PM Bug #14239 (Resolved): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- Kindly come and replicate before change the status. Refer Screenshots
- 12:41 PM Bug #14239 (Not Resolved): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- Status and Score value is only populating but color code is not getting populated to child checkpoints if score is se...
- 03:23 PM Bug #14340 (Closed): Audit which is ready to perform is not listing in perform audit page of auditor
- 03:05 PM Bug #14340 (Resolved): Audit which is ready to perform is not listing in perform audit page of auditor
- 03:05 PM Bug #14340 (Open): Audit which is ready to perform is not listing in perform audit page of auditor
- Cannot able to replicate
- 02:55 PM Bug #14340 (Closed): Audit which is ready to perform is not listing in perform audit page of auditor
- Audit which is ready to perform is not listing in perform audit page of auditor
- 03:20 PM Bug #14266: Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- This is not an issue. It is working fine after IIS restart.
- 02:41 PM Bug #14262 (Closed): Effectiveness for findings: Effectiveness status are not properly display in tool tip
- Verified in cycle2
- 02:40 PM Bug #14261 (Closed): Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- Issue verified in Cycle2
- 02:38 PM Bug #14256 (Closed): Email context for Effectiveness For Findings are not displayed in Multi site
- Verified
- 02:26 PM Bug #14244 (Closed): Shift Should drown down not textbox for planned and Actual Audit
- verified in cycle2
- 02:26 PM Bug #14244: Shift Should drown down not textbox for planned and Actual Audit
- Verified
- 01:39 PM Bug #14244 (Resolved): Shift Should drown down not textbox for planned and Actual Audit
- not an issue. if you select shift and it will reflect as DropDown in the Sceduling page.
it will fetch TPM shift i... - 12:36 PM Bug #14244 (Not Resolved): Shift Should drown down not textbox for planned and Actual Audit
- 01:48 PM Bug #14331 (Resolved): checkpoint logic is not displaying in Fill checklist screen though it is defined
- 01:41 PM Bug #14331 (Open): checkpoint logic is not displaying in Fill checklist screen though it is defined
- 01:39 PM Bug #14331: checkpoint logic is not displaying in Fill checklist screen though it is defined
- For List we will not show logic. Raja it is already discussed.
- 01:25 PM Bug #14331 (Closed): checkpoint logic is not displaying in Fill checklist screen though it is defined
- checkpoint logic is not displaying in Fill checklist screen though it is defined
- 01:46 PM Bug #14325 (In Progress): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- 01:41 PM Bug #14325 (Open): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- 12:37 PM Bug #14325 (Closed): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments".
- 01:42 PM Bug #14318 (Open): While opening the inspection sheet from Supervisor approval menu,Hourly reminder email is getting triggered
- 11:50 AM Bug #14318 (Closed): While opening the inspection sheet from Supervisor approval menu,Hourly reminder email is getting triggered
- While opening the inspection sheet from Supervisor approval menu Hourly reminder email is getting triggered
- 01:42 PM Bug #14329 (Open): Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
- 01:16 PM Bug #14329 (Closed): Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
- Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects
- 01:41 PM Bug #14327 (Open): Email for Effectiveness For Findings->Some fields are missing in emails content
- 12:45 PM Bug #14327 (Closed): Email for Effectiveness For Findings->Some fields are missing in emails content
- 1) Best Regards name is missing
2) Effectiveness due date is missing
3) Font type is different
4) Verification a... - 01:41 PM Bug #14319 (Open): In Program - Deliverable name is not displayed in the risk register.
- 11:59 AM Bug #14319 (Closed): In Program - Deliverable name is not displayed in the risk register.
- In Program - Deliverable name is not displayed in the risk register.
- 01:40 PM Bug #14323 (Open): When trying to delete the document from the ECN form then in the prompt it shows "error" before the alert message.
- 12:16 PM Bug #14323 (Closed): When trying to delete the document from the ECN form then in the prompt it shows "error" before the alert message.
- 01:40 PM Bug #14316 (Open): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 10:49 AM Bug #14316 (Closed): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- There is no option to expand external elements after collapsing it.
- 01:40 PM Bug #14320 (Open): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 11:59 AM Bug #14320 (Closed): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- • While scrolling the page, context menu is not scrolling along with the element.
• Also when the element is at th... - 01:40 PM Bug #14321 (Open): Header for Focus Element is displayed as Topic Element
- 12:06 PM Bug #14321 (Closed): Header for Focus Element is displayed as Topic Element
- Header for Topic Element must be changed as Focus Element
- 01:39 PM Bug #14324 (Open): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 12:34 PM Bug #14324 (Closed): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- After clicking on Step Label and updating any Percentage, JS error is displayed
- 01:39 PM Bug #14328 (Open): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- 12:59 PM Bug #14328 (Closed): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- After deleting an Operation category in Structure analysis and adding new Operation Category, Assigned Operation ID a...
- 01:00 PM Bug #14247 (Closed): Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- when clicked on checklist displays checkpoints
- 12:52 PM Bug #14249 (Closed): "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- 12:52 PM Bug #14246 (Closed): LPA: User should be displayed based on the Auditor access in Layer page
- Currently system displays users having access to auditor rights
- 12:43 PM Bug #14326: Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Had a discussion with Bijoy on 30 September 2019. As per his comment it has to fix it on Sprint-5 (Regression Testing...
- 12:42 PM Bug #14326 (Closed): Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list alo...
- 12:34 PM Bug #14322 (Resolved): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 12:32 PM Bug #14322 (Open): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 12:10 PM Bug #14322 (Closed): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
Issue #... - 12:34 PM Bug #14241 (Closed): Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- Now currently compliance is renamed as Checklist
- 12:25 PM Bug #14210 (Resolved): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 12:16 PM Bug #14243 (Closed): Need filter option in process page for Site Specification
- 12:13 PM Bug #14238 (Closed): Objective evidence is not displaying as mandatory for automatically raised findings
- As per the boopathi comment filled data in remarks field and tried scenario reported another issue but the related is...
- 12:07 PM Bug #14282 (Resolved): LPA : Changed responsible person person is not displaying in audit report for findings
- Duplicate Issue:14286
- 12:01 PM Bug #14286 (In Progress): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- 12:00 PM Bug #14279 (In Progress): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- 11:52 AM Bug #14257 (Closed): By default system should display Default LPA category
- As per discussion with bijoy on 15-10-2019 11:50 Am issue is closed
- 11:52 AM Bug #14313 (In Progress): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- 11:29 AM Bug #14313 (Open): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- 11:51 AM Bug #14311 (In Progress): Effectiveness for findings: Audit programs effective due days are not saving
- 11:33 AM Bug #14311: Effectiveness for findings: Audit programs effective due days are not saving
- Should not add two different issues under one issue item as it is a separate issue.
- 11:32 AM Bug #14311 (Open): Effectiveness for findings: Audit programs effective due days are not saving
- 11:46 AM Bug #14237 (Closed): While publishing audit report is not displaying with saved success message
- 11:45 AM Bug #14308 (Open): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 11:44 AM Bug #14242 (Closed): LPA Audit: It should allow to schedule the Manufacturing line
- 11:39 AM Bug #14310 (Open): Changing the status of the project charter, the status view icon is missing in the project charter page
- 11:39 AM Bug #14315 (Open): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 10:16 AM Bug #14315 (Closed): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 11:38 AM Bug #14248 (Closed): Doc Pro level are not listed in the NC details page.
- 11:35 AM Bug #14317 (Open): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 11:33 AM Bug #14317 (Closed): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- Context menu is not closing even after clicking outside the menu list
- 11:28 AM Bug #14309 (Open): "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- 10:47 AM Bug #14236 (Closed): LPA ->Audit report is not displaying findings in the report while publishing
- 10:44 AM Bug #14292 (Resolved): Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- AS per Sabu suggestion we close the tab which does not have any data in perform audit page while loading.
Tab nam... - 09:55 AM Bug #14292: Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- again we have rephrase it
- 10:44 AM Bug #14259 (Closed): LPA-> when Entered more number of character in Effectiveness due days field display error while save
- Does not display error but it is updated with 99 days so reported issue is fixed and Closed
- 10:41 AM Bug #14260 (Closed): LPA-> Audit Program created in Auditpro are displayed in LPA Category drop down
- 10:40 AM Bug #14296 (Not Resolved): Auditee response/Report: Date of audit is not displayed in Auditee response report
- Still date is not displayed in auditee->corrective actions when viewed in report
- 10:37 AM Bug #14271 (In Progress): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- 10:37 AM Bug #14258 (In Progress): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- 10:37 AM Bug #14307 (In Progress): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- 10:36 AM Bug #14285 (Resolved): LPA : Add audit activities window is not displaying Respective auditor of the particular audit
10/14/2019
- 07:54 PM Bug #14312 (Open): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 06:26 PM Bug #14312 (Closed): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 07:01 PM Bug #14313 (Closed): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- Alert message: Please enter audit activities to continue
- 06:34 PM Bug #14238 (Resolved): Objective evidence is not displaying as mandatory for automatically raised findings
- while filling checklist 'Remarks' saved in the objective evidence filed
- 05:54 PM Bug #14238 (Open): Objective evidence is not displaying as mandatory for automatically raised findings
- 06:30 PM Bug #14260 (Resolved): LPA-> Audit Program created in Auditpro are displayed in LPA Category drop down
- 05:54 PM Bug #14260 (Open): LPA-> Audit Program created in Auditpro are displayed in LPA Category drop down
- 06:30 PM Bug #14259 (Resolved): LPA-> when Entered more number of character in Effectiveness due days field display error while save
- 05:54 PM Bug #14259 (Open): LPA-> when Entered more number of character in Effectiveness due days field display error while save
- 06:30 PM Bug #14257 (Resolved): By default system should display Default LPA category
- 05:54 PM Bug #14257 (Open): By default system should display Default LPA category
- 06:30 PM Bug #14256 (Resolved): Email context for Effectiveness For Findings are not displayed in Multi site
- 05:54 PM Bug #14256 (Open): Email context for Effectiveness For Findings are not displayed in Multi site
- 06:30 PM Bug #14249 (Resolved): "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- 05:54 PM Bug #14249 (Open): "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- 06:30 PM Bug #14247 (Resolved): Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- 05:54 PM Bug #14247 (Open): Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- 06:30 PM Bug #14246 (Resolved): LPA: User should be displayed based on the Auditor access in Layer page
- 05:54 PM Bug #14246 (Open): LPA: User should be displayed based on the Auditor access in Layer page
- 06:30 PM Bug #14244 (Resolved): Shift Should drown down not textbox for planned and Actual Audit
- 05:54 PM Bug #14244 (Open): Shift Should drown down not textbox for planned and Actual Audit
- 06:30 PM Bug #14242 (Resolved): LPA Audit: It should allow to schedule the Manufacturing line
- 05:54 PM Bug #14242 (Open): LPA Audit: It should allow to schedule the Manufacturing line
- 06:30 PM Bug #14241 (Resolved): Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- 05:54 PM Bug #14241 (Open): Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- 06:30 PM Bug #14239 (Resolved): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- 05:54 PM Bug #14239 (Open): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- 06:28 PM Bug #14236 (Resolved): LPA ->Audit report is not displaying findings in the report while publishing
- Issue Fixed in Cy-1
- 05:54 PM Bug #14236 (Open): LPA ->Audit report is not displaying findings in the report while publishing
- 06:26 PM Bug #14237 (Resolved): While publishing audit report is not displaying with saved success message
- 05:54 PM Bug #14237 (Open): While publishing audit report is not displaying with saved success message
- 06:25 PM Bug #14201 (Closed): Reason for request: If its given in the rich text box, its not aligned in revision history summary
- 06:25 PM Bug #14261 (Resolved): Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- Issue Fixed in Cy-1
- 05:54 PM Bug #14261 (Open): Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- 06:25 PM Bug #14262 (Resolved): Effectiveness for findings: Effectiveness status are not properly display in tool tip
- Issue Fixed in Cy-1
- 05:54 PM Bug #14262 (Open): Effectiveness for findings: Effectiveness status are not properly display in tool tip
- 06:18 PM Bug #14248 (Fixed with Hotfix): Doc Pro level are not listed in the NC details page.
- 06:18 PM Bug #14248: Doc Pro level are not listed in the NC details page.
- Its working fine in this builds.
- 05:54 PM Bug #14248 (Open): Doc Pro level are not listed in the NC details page.
- 06:17 PM Bug #14240 (Closed): Checkpoint color code is not working in Fill checklist page
- 06:17 PM Bug #14240 (Fixed with Hotfix): Checkpoint color code is not working in Fill checklist page
- Verified
- 05:54 PM Bug #14240 (Open): Checkpoint color code is not working in Fill checklist page
- 06:17 PM Bug #14243 (Resolved): Need filter option in process page for Site Specification
- 05:54 PM Bug #14243 (Open): Need filter option in process page for Site Specification
- 06:16 PM Bug #14311 (Closed): Effectiveness for findings: Audit programs effective due days are not saving
- Effectiveness for findings: Audit programs effective due days are not saving
Impact Areas:
1) Closed out -> Cu... - 06:10 PM Bug #14207 (Closed): Related documents:Select level should shows the level based on the document access, but its showing based on the folder access
- 06:10 PM Bug #14310 (Closed): Changing the status of the project charter, the status view icon is missing in the project charter page
- changing the status of the project charter, the status view icon is missing in the project charter page.
- 06:08 PM Bug #14309 (Closed): "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- 06:08 PM Bug #14308 (Closed): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification ...
- 05:54 PM Bug #14305 (Open): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 05:14 PM Bug #14305 (Closed): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- Template should contain only the deliverable and resource .
- 05:54 PM Bug #14270 (Open): In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- 12:11 PM Bug #14270 (Closed): In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- 05:54 PM Bug #14269 (Open): Regression: Template it is showing the output icon for the attached input document.
- 12:00 PM Bug #14269 (Closed): Regression: Template it is showing the output icon for the attached input document.
- Regression: Template it is showing the output icon for the attached input document.
- 05:54 PM Bug #14267 (Open): Clicking on track project in SCAR form shows empty page.
- 11:56 AM Bug #14267 (Closed): Clicking on track project in SCAR form shows empty page.
- Clicking on track project in SCAR form shows empty page.
- 05:54 PM Bug #14266 (Open): Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- 11:55 AM Bug #14266 (Closed): Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- 05:54 PM Bug #14265 (Open): The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- 11:55 AM Bug #14265 (Closed): The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- 05:54 PM Bug #14253 (Open): Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- 05:54 PM Bug #14252 (Open): Process Activities ->Unassigned site name is displayed for a process
- 05:54 PM Bug #14307 (Open): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- 05:53 PM Bug #14307 (Closed): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified ...
- 05:54 PM Bug #14306 (Open): The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- 05:50 PM Bug #14306 (Closed): The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- The document viewer is not showing up all the tasks of project. Only first few tasks is displaying for the given 2 pr...
- 05:54 PM Bug #14274 (Open): Groups: When creating a new group, By default view documents rights should be checked
- 01:15 PM Bug #14274 (Closed): Groups: When creating a new group, By default view documents rights should be checked
- Groups: When creating a new group, By default view documents rights should be checked
- 05:54 PM Bug #14273 (Open): LPA : Findings attachment against the checkpoints when tried to view after attached it displays a popup "Linked document with this revision is not available"
- 01:14 PM Bug #14273 (Closed): LPA : Findings attachment against the checkpoints when tried to view after attached it displays a popup "Linked document with this revision is not available"
- Findings attachment against the checkpoints when tried to view after attached displays "Linked document with this rev...
- 05:54 PM Bug #14272 (Open): Archive Project is not site specific.
- 12:52 PM Bug #14272 (Closed): Archive Project is not site specific.
- The projects archived in one site is showing up under archived projects of other site.
- 05:54 PM Bug #14271 (Open): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- 12:43 PM Bug #14271 (Closed): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- Effectiveness due days field in LPA Category is not displaying days entered in field after save.
- 05:54 PM Bug #14268 (Open): Template to project conversion - Showing error Supplier PPAP
- 11:58 AM Bug #14268 (Closed): Template to project conversion - Showing error Supplier PPAP
- While converting template to project getting "converted successfully" alert but clicking on OK redirecting to error p...
- 05:54 PM Bug #14264 (Open): Problem on Level Creation as Administrator
- 11:05 AM Bug #14264 (Closed): Problem on Level Creation as Administrator
- Created a level for the first time as administrator level is getting created as an another parent level of the same l...
- 05:54 PM Bug #14258 (Open): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- 05:54 PM Bug #14250 (Open): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- 05:54 PM Bug #14245 (Open): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:44 PM Bug #14294: While approving the respective action in approver login displays dual window after approver
- Action management issue. already discussed with mohan in 900
- 04:52 PM Bug #14294 (Open): While approving the respective action in approver login displays dual window after approver
- 03:31 PM Bug #14294 (Closed): While approving the respective action in approver login displays dual window after approver
- While approving the respective action in approver login displays dual window after approver
- 05:43 PM Bug #14296 (Resolved): Auditee response/Report: Date of audit is not displayed in Auditee response report
- 05:43 PM Bug #14296: Auditee response/Report: Date of audit is not displayed in Auditee response report
- WAD. Discussed in sprint
- 04:52 PM Bug #14296 (Open): Auditee response/Report: Date of audit is not displayed in Auditee response report
- 03:37 PM Bug #14296 (Closed): Auditee response/Report: Date of audit is not displayed in Auditee response report
- Auditee response/Report: Date of audit is not displayed in Auditee response
1) Login as Auditee
2) Click the Aud... - 05:04 PM Bug #14198 (Resolved): Process VDA - Structure Analysis - Server error is displayed while selecting Create Operation and FourM Categories.
- 04:52 PM Bug #14302 (Open): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 04:38 PM Bug #14302 (Closed): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- Filter Dropdown for Operation and FourM category is not working properly.
- 04:52 PM Bug #14301 (Open): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 04:29 PM Bug #14301 (Closed): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 04:52 PM Bug #14300 (Open): Attached attachment name displays in number format after attached
- 04:28 PM Bug #14300 (Closed): Attached attachment name displays in number format after attached
- Attached attachment name displays in number format after attached
- 04:52 PM Bug #14298 (Open): Process VDA - There is no option to add Severity for the added Effect.
- 03:39 PM Bug #14298 (Closed): Process VDA - There is no option to add Severity for the added Effect.
- Need to add Severity drop down as in Design VDA.
By default system is taking Severity value as 10 in Failure(Effec... - 04:52 PM Bug #14297 (Open): LPA : while attaching attachment in 8D form displays error
- 03:38 PM Bug #14297 (Closed): LPA : while attaching attachment in 8D form displays error
- while attaching attachment in 8D form displays error
- 04:52 PM Bug #14293 (Open): Not able to publish the charter of Change management initiated project.
- 03:29 PM Bug #14293 (Closed): Not able to publish the charter of Change management initiated project.
- 04:52 PM Bug #14292 (Open): Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- 04:15 PM Bug #14292: Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- Cannot able to understand the issue
- 03:27 PM Bug #14292 (Closed): Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- Perform Audit: While login into perform audit page nc/ofi breadcrumb should be open and breadcrumb is closed while se...
- 04:52 PM Bug #14291 (Open): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- 03:26 PM Bug #14291 (Closed): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- While converting Draft to a project clicking on Add Supplier button is not responding
- 04:52 PM Bug #14290 (Open): LPA : Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan waiting for approval" alert message
- 03:21 PM Bug #14290 (Closed): LPA : Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan waiting for approval" alert message
- Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan w...
- 04:52 PM Bug #14289 (Open): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- 03:19 PM Bug #14289 (Closed): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- While opening Process Flow, system displays JS error.(Refer Description)
- 04:52 PM Bug #14288 (Open): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- 03:19 PM Bug #14288 (Closed): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Impo...
- 04:52 PM Bug #14287 (Open): Regression: select a Draft project and Click on Projects menu, the project listing screen is opening in the new tab.(Change the pillar and click on projects menu)
- 03:10 PM Bug #14287 (Closed): Regression: select a Draft project and Click on Projects menu, the project listing screen is opening in the new tab.(Change the pillar and click on projects menu)
- 04:52 PM Bug #14286 (Open): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- 03:08 PM Bug #14286 (Closed): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- We have changed auditee as Global process Owner
- 04:52 PM Bug #14285 (Open): LPA : Add audit activities window is not displaying Respective auditor of the particular audit
- 03:03 PM Bug #14285 (Closed): LPA : Add audit activities window is not displaying Respective auditor of the particular audit
- Add audit activities window is not displaying Respective auditor of the particular audit
- 04:52 PM Bug #14284 (Open): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- 03:03 PM Bug #14284 (Closed): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hi...
- 04:52 PM Bug #14282 (Open): LPA : Changed responsible person person is not displaying in audit report for findings
- 02:52 PM Bug #14282 (Closed): LPA : Changed responsible person person is not displaying in audit report for findings
- Changed responsible person person is not displaying in audit report for findings
- 04:52 PM Bug #14281 (Open): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- 02:49 PM Bug #14281 (Closed): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- Process/Activities page:Unwanted pop up is displayed while changing the Site drop in Process/Activities page.
- 04:52 PM Bug #14280 (Open): Not able to attach document from DocPro - Not working
- 02:46 PM Bug #14280 (Closed): Not able to attach document from DocPro - Not working
- 04:52 PM Bug #14279 (Open): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- 02:43 PM Bug #14279 (Closed): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Tem...
- 04:52 PM Bug #14278 (Open): LPA : while creating equipment under manufacturing line displays error
- 02:36 PM Bug #14278 (Closed): LPA : while creating equipment under manufacturing line displays error
- while creating equipment under manufacturing line displays error
- 04:52 PM Bug #14277 (Open): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 02:33 PM Bug #14277 (Closed): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 04:52 PM Bug #14276 (Open): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 02:25 PM Bug #14276 (Closed): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 04:52 PM Bug #14275 (Open): SB-190910324 In similar concern pop up Cancel button is not working.
- 01:26 PM Bug #14275 (Closed): SB-190910324 In similar concern pop up Cancel button is not working.
- SB-190910324 In similar concern pop up Cancel button is not working.
- 01:11 PM Bug #14202 (Closed): New document request table:when special character " is entered it shows as html tags in table under reason for request and also the characters entered after >this symbol is not displayed in table but it show in rev his summary
- Closed in cy 2
10/11/2019
- 07:01 PM Bug #14257: By default system should display Default LPA category
- AS discussed in sprint, no need show default categories
- 03:54 PM Bug #14257 (Closed): By default system should display Default LPA category
- By default system should display Default LPA category
As : NC-Layer process audit
OFI-Layer process audit w... - 06:21 PM Bug #14248: Doc Pro level are not listed in the NC details page.
- cannot able to replicate
- 05:47 PM Bug #14262 (Closed): Effectiveness for findings: Effectiveness status are not properly display in tool tip
- Green+Yellow -> Proceed to deadline+Not verified
Red+Yellow -> Deadline Violated+Not verified - 05:43 PM Bug #14261 (Closed): Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- 04:01 PM Bug #14260 (Closed): LPA-> Audit Program created in Auditpro are displayed in LPA Category drop down
- Audit programs which are created in Audit pro are displaying in LPA Category in Audit program drop down when clicked
- 03:59 PM Bug #14259 (Closed): LPA-> when Entered more number of character in Effectiveness due days field display error while save
- when Entered more number of character in Effectiveness days field display error while save
Ex: 522155488512123346 - 03:57 PM Bug #14258 (Closed): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- LPA->LPA category Effectiveness days Should not display "0" instead it should display blank if 0 value is set in it
- 03:19 PM Bug #14256 (Closed): Email context for Effectiveness For Findings are not displayed in Multi site
- email context for Effectiveness For Findings are not displayed in Multi site
- 02:22 PM Bug #14202 (Resolved): New document request table:when special character " is entered it shows as html tags in table under reason for request and also the characters entered after >this symbol is not displayed in table but it show in rev his summary
- 02:22 PM Bug #14201 (Resolved): Reason for request: If its given in the rich text box, its not aligned in revision history summary
- 02:22 PM Bug #14207 (Resolved): Related documents:Select level should shows the level based on the document access, but its showing based on the folder access
- 12:18 PM Bug #14253 (Closed): Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- 12:07 PM Bug #14252 (Closed): Process Activities ->Unassigned site name is displayed for a process
- Process Activities -> By default the site dropdown is displaying as corporate while adding new row for a process. But...
- 10:15 AM Bug #14247: Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- Yes,I agree.
After discuss with bijoy, I have raised this issue. - 09:47 AM Bug #14247: Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- Is it a requirement in master checklist page?
- 09:51 AM Bug #14250 (Closed): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
10/10/2019
- 09:50 PM Bug #14243: Need filter option in process page for Site Specification
- Issue is fixed and patches moved to Build and send for verification
- 05:17 PM Bug #14243 (Closed): Need filter option in process page for Site Specification
- Need filter option in process page for Site Specification
- 06:44 PM Bug #14249 (Closed): "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- 06:41 PM Bug #14248: Doc Pro level are not listed in the NC details page.
- Assign to respective teams
- 06:33 PM Bug #14248 (Closed): Doc Pro level are not listed in the NC details page.
- Doc Pro level are not listed in the NC details page.
- 06:35 PM Bug #14239: like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- Cannot able to replicate
- 03:07 PM Bug #14239 (Closed): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child but ...
- 06:33 PM Bug #14240: Checkpoint color code is not working in Fill checklist page
- Not an issue: Refer Screenshot
- 05:03 PM Bug #14240 (Closed): Checkpoint color code is not working in Fill checklist page
- Checkpoint color code is not working in Fill checklist page
Import checklist page in Supplier management
1) L... - 05:56 PM Bug #14237: While publishing audit report is not displaying with saved success message
- Cannot able to replicate: ref screen shot for Same audit
- 02:37 PM Bug #14237 (Closed): While publishing audit report is not displaying with saved success message
- While publishing audit report is not displaying with saved success message
- 05:49 PM Bug #14247 (Closed): Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- No need to show the Checkpoints, Need to show only checklists.
- 05:37 PM Bug #14246 (Closed): LPA: User should be displayed based on the Auditor access in Layer page
- LPA: User should be displayed based on the Auditor access in Layer page
- 05:29 PM Bug #14245 (Closed): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:20 PM Bug #14244 (Closed): Shift Should drown down not textbox for planned and Actual Audit
- 05:13 PM Bug #14242 (Closed): LPA Audit: It should allow to schedule the Manufacturing line
- LPA Audit: It should allow to schedule the Manufacturing line
- 05:07 PM Bug #14241 (Closed): Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- 03:01 PM Bug #14238 (Closed): Objective evidence is not displaying as mandatory for automatically raised findings
- Objective evidence is not displaying as mandatory for automatically raised findings
- 02:32 PM Bug #14236 (Closed): LPA ->Audit report is not displaying findings in the report while publishing
- Audit report is not displaying findings in the report while publishing
10/09/2019
- 01:04 PM Bug #14221 (Open): Production Inprocess: All Search is not working if Production Inprocess is enabled in IC Settings
- 01:04 PM Bug #14219 (Open): Production Inprocess & Dept Worksheet : After clicking search on Operations/Equipments pop-up respective images are getting changed
- 01:04 PM Bug #14211 (Open): If an Inspection is Inprogress its allowing to create a new schedule for Receiving Inspection but not allowing for Final Inspection.Need a common rule set for both the Inspections
- 01:04 PM Bug #14210 (Open): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 01:04 PM Bug #14209 (Open): Inspection form Standard : Search by Notification interval not working
- 01:04 PM Bug #14207 (Open): Related documents:Select level should shows the level based on the document access, but its showing based on the folder access
- 01:04 PM Bug #14203 (Open): When entering document name with special character then it shows different alert. Show common alert when the special characters are not accepted.Same for file name which has spl char(Attached the doc for ref))
- 01:04 PM Bug #14202 (Open): New document request table:when special character " is entered it shows as html tags in table under reason for request and also the characters entered after >this symbol is not displayed in table but it show in rev his summary
- 01:04 PM Bug #14201 (Open): Reason for request: If its given in the rich text box, its not aligned in revision history summary
- 01:04 PM Bug #14198 (Open): Process VDA - Structure Analysis - Server error is displayed while selecting Create Operation and FourM Categories.
Also available in: Atom