Activity
From 09/29/2019 to 10/28/2019
10/28/2019
10/25/2019
- 08:05 PM Bug #14596 (Resolved): The buttons in the meetings page is showing as disabled( Issue with Supplier PPAP only)
- Change in LoadMeeting.cshtml
- 07:30 PM Bug #14567 (Resolved): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 06:53 PM Bug #14585: Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- Nre
- 06:01 PM Bug #14624 (Resolved): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- 04:02 PM Bug #14624 (Open): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- 12:27 PM Bug #14624 (Closed): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- Severity Rating is not listed in the drop down in Add Design Effect Master table.
- 05:55 PM Bug #14543 (Resolved): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- 05:50 PM Bug #14275 (Resolved): SB-190910324 In similar concern pop up Cancel button is not working.
- 05:45 PM Bug #14320 (Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- dupliacion issues
- 05:39 PM Bug #14592 (In Progress): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 05:37 PM Bug #14522 (Resolved): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 03:21 PM Bug #14522 (In Progress): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 05:37 PM Bug #14526 (Resolved): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 03:11 PM Bug #14526 (In Progress): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 05:37 PM Bug #14537 (Resolved): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 05:36 PM Bug #14538 (Resolved): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 05:36 PM Bug #14540 (Resolved): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 05:36 PM Bug #14541 (Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 05:35 PM Bug #14544 (Resolved): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 05:35 PM Bug #14553 (Resolved): Design and Process VDA - Percentage allocation displays 7th Step
- 05:35 PM Bug #14556 (Resolved): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- 05:35 PM Bug #14566 (Resolved): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 05:34 PM Bug #14569 (Resolved): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- 05:34 PM Bug #14591 (Resolved): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 05:34 PM Bug #14618 (Resolved): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 12:23 PM Bug #14618 (In Progress): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 05:29 PM Bug #14421 (Resolved): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 02:28 PM Bug #14421 (In Progress): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 02:03 PM Bug #14421 (Not Resolved): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 05:29 PM Bug #14552 (Resolved): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 02:48 PM Bug #14552 (In Progress): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 05:28 PM Bug #14578 (Resolved): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 04:46 PM Bug #14578 (In Progress): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 05:27 PM Bug #14609 (Resolved): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 02:47 PM Bug #14609 (In Progress): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 05:26 PM Bug #14612 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 11:08 AM Bug #14612 (In Progress): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 05:26 PM Bug #14620 (Resolved): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- 05:16 PM Bug #14621 (Resolved): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- 05:14 PM Bug #14559 (Resolved): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- 05:07 PM Bug #14298: Process VDA - There is no option to add Severity for the added Effect.
- Dev Team has provided Assign Severity Rating in Cycle 3. So Severity for Effect can be added for RISK.
But there ... - 05:04 PM Bug #14643 (Open): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- 04:51 PM Bug #14643 (Closed): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- Click on Auditee : Corrective Actions projects widget is opening/ closing
- 04:38 PM Bug #14630 (Fixed with Hotfix): Report : Findings report->Bench mark field does not display frequently modified data
- 04:37 PM Bug #14630 (Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- 03:25 PM Bug #14630 (Not Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- Issue replicated to Joshua
- 01:23 PM Bug #14630 (Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- Need to run the job to get latest data
- 01:16 PM Bug #14630 (Open): Report : Findings report->Bench mark field does not display frequently modified data
- 01:14 PM Bug #14630 (Closed): Report : Findings report->Bench mark field does not display frequently modified data
- Findings report->Bench mark field does not display frequently modified data
Change the status along with comments... - 04:02 PM Bug #14640 (Open): While clicking on the supplier link from social media page the part details are showing error page.
- 03:49 PM Bug #14640 (Closed): While clicking on the supplier link from social media page the part details are showing error page.
- While clicking on the supplier link from social media page the part details are showing error page.
- 04:02 PM Bug #14634 (Open): In APQP Mail - Site URL and Document URL not displayed fully.
- 02:12 PM Bug #14634 (Closed): In APQP Mail - Site URL and Document URL not displayed fully.
- In APQP Mail - Site URL and Document URL not displayed fully.
- 04:02 PM Bug #14628 (Open): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 01:07 PM Bug #14628 (Closed): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- Context menus for Effect/Failure/Cause must be categorised.
• Assign Severity rating is not displayed for Direct ... - 04:02 PM Bug #14623 (Open): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 10:52 AM Bug #14623 (Closed): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 04:02 PM Bug #14619 (Open): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- 04:02 PM Bug #14617 (Open): Master folder tag allows to save duplicate data
- 04:00 PM Bug #14360 (Fixed with Hotfix): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 03:33 PM Bug #14581: Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- As discussed with sabu,Please make the following changes in assign route screen
1.Show the document owner as Bhuva... - 03:30 PM Bug #14517 (Closed): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Working fine
- 03:26 PM Bug #14562 (Fixed with Hotfix): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 02:15 PM Bug #14562 (Resolved): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 03:13 PM Bug #14626 (Fixed with Hotfix): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:19 PM Bug #14626 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Duplicate issue #14267
- 01:14 PM Bug #14626 (Open): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:03 PM Bug #14626 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 03:08 PM Bug #14252 (Closed): Process Activities ->Unassigned site name is displayed for a process
- 02:30 PM Bug #14629 (TBD): To be Discussed- For Every BOM Import during a program creation (before saving), all the imported details are showing up in the Supplier part details, But our program shows only the latest uploaded details.
- 01:11 PM Bug #14629 (TBD): To be Discussed- For Every BOM Import during a program creation (before saving), all the imported details are showing up in the Supplier part details, But our program shows only the latest uploaded details.
- For Every BOM Import during a program creation (before saving), all the imported details are showing up in the Suppli...
- 02:18 PM Bug #14584 (Fixed with Hotfix): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 02:17 PM Bug #14584 (Resolved): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 02:15 PM Bug #14400 (Resolved): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 02:10 PM Bug #14625 (Open): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 12:50 PM Bug #14625 (Closed): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bul...
- 02:05 PM Bug #14523 (Fixed with Hotfix): Action Management: Action name is displaying twice.
- 10:59 AM Bug #14523 (Resolved): Action Management: Action name is displaying twice.
- 02:05 PM Bug #14564 (Fixed with Hotfix): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 10:59 AM Bug #14564 (Resolved): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 01:19 PM Bug #14359 (Fixed with Hotfix): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 12:58 PM Bug #14359 (Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 12:17 PM Bug #14359 (Not Fixed with Hotfix): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- YYYY/MM/DD format is not supporting
- 01:19 PM Bug #14627 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:18 PM Bug #14627 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:12 PM Bug #14627 (Open): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:11 PM Bug #14627 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:11 PM Bug #14627 (Open): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- WAD. NC filled as code
- 01:05 PM Bug #14627 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:13 PM Bug #14432 (Fixed with Hotfix): Findings Report ->Benchmark data is not displayed in Findings Reports.
- 12:57 PM Bug #14363 (Fixed with Hotfix): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- Displays reminder in Notification setup and route in assign routes
- 12:38 PM Bug #14404 (Fixed with Hotfix): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 12:24 PM Bug #14353 (Fixed with Hotfix): Email for Effectiveness For Findings -> Email subject is wrong.
- 12:21 PM Bug #14368 (Resolved): For the concerns created from IC, without making any changes in concern form asks " New Concern form for category and sub category has been changed. Do you want new form changes?"
- 12:20 PM Bug #14308 (Fixed with Hotfix): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- Verified as Hot fix
- 11:46 AM Bug #14294 (Fixed with Hotfix): While approving the respective action in approver login displays dual window after approver
- 11:00 AM Bug #14294 (Resolved): While approving the respective action in approver login displays dual window after approver
- 11:42 AM Bug #14573 (Resolved): The concern is created along with supplier and part number, but logging in as supplier user not shows the created concern.
- 11:42 AM Bug #14574 (Resolved): In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- 11:36 AM Bug #14608 (Closed): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- 11:35 AM Bug #14608 (Resolved): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- duplication issues
- 10:32 AM Bug #14536 (Fixed with Hotfix): LPA : Auditor and Auditee availability email is not generating
- Issue verified as Hot fix
10/24/2019
- 07:45 PM Bug #14603 (In Progress): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 04:08 PM Bug #14603 (Open): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 03:07 PM Bug #14603 (Closed): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 07:38 PM Bug #14558 (Resolved): In Edge browser - ECR number is shown as link
- There is no option for this, it's built into the program.
Please refer the below microsoft link:
https://answer... - 07:31 PM Bug #14570 (Resolved): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 02:34 PM Bug #14570 (In Progress): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 02:14 PM Bug #14570 (Open): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 12:07 PM Bug #14570 (Closed): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- Multi Language RFD - When click on flow down indicator in tree diagram, the alert option cancel should be converted i...
- 07:31 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 03:10 PM Bug #14539: Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- This is not an issue :
In the Interface matrix, combined interface matrix , FSR, interface matrix immediate pare... - 03:06 PM Bug #14539 (In Progress): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 07:31 PM Bug #14528 (Resolved): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 07:29 PM Bug #14528 (In Progress): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 07:31 PM Bug #14525 (Resolved): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- 02:50 PM Bug #14525 (In Progress): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- 07:31 PM Bug #14514 (Resolved): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- 02:33 PM Bug #14514 (In Progress): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- 07:28 PM Bug #14620 (In Progress): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- 07:27 PM Bug #14620 (Open): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- 05:27 PM Bug #14620 (Closed): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- In the Design VDA, for the Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon. ...
- 07:27 PM Bug #14621 (In Progress): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- 07:25 PM Bug #14621 (Open): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- 05:33 PM Bug #14621 (Closed): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- In the Design VDA, for the Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon. ...
- 07:24 PM Bug #14351 (Fixed with Hotfix): Report : Final Inspection and Capture History reports are not opening
- 06:43 PM Bug #14221 (Fixed with Hotfix): Production Inprocess: All Search is not working if Production Inprocess is enabled in IC Settings
- 06:41 PM Bug #14535 (Fixed with Hotfix): On clicking on Chart hyperlink in Receiving Inspection sheet server error pop-up is displayed
- 06:29 PM Bug #14321 (Closed): Header for Focus Element is displayed as Topic Element
- 06:18 PM Bug #14530 (Fixed with Hotfix): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 06:14 PM Bug #14561 (Fixed with Hotfix): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 06:07 PM Bug #14457 (Fixed with Hotfix): Multi site->Audit program: Remove this alert message for clause in multi site
- 06:02 PM Bug #14245 (Yet to Verify): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Need to get patch from raghu ram .patch not moved
- 05:59 PM Bug #14484 (Closed): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 05:58 PM Bug #14550 (Fixed with Hotfix): Remarks/Objective Evidence field does not display entered data when retrieved
- 05:56 PM Bug #14500 (Closed): (Multi Browser - Chrome) Process VDA - Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- 05:54 PM Bug #14343 (Yet to Verify): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- Not able to select shift though it is defined
- 05:51 PM Bug #14495 (Closed): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- 05:48 PM Bug #14493 (Closed): Multi Browser(Chrome & Firefox) - Design VDA - system displays the Context element as selected while opening Functional/Failure Analysis
- 05:44 PM Bug #14479 (Closed): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- 05:42 PM Bug #14566 (In Progress): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 01:36 PM Bug #14566 (Open): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 11:02 AM Bug #14566 (Closed): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 05:37 PM Bug #14428 (Fixed with Hotfix): LPA :Holiday alert is not displayed when selected the day which is holiday
- 05:35 PM Bug #14382 (Fixed with Hotfix): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- 02:38 PM Bug #14382 (Resolved): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- 05:33 PM Bug #14250 (Fixed with Hotfix): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- 03:58 PM Bug #14250 (Resolved): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- 05:31 PM Bug #14387 (Fixed with Hotfix): Suite: First name,middle name,last name separation is not valid
- Working fine.
- 05:26 PM Bug #14473 (Closed): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 05:24 PM Bug #14405 (Fixed with Hotfix): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 01:18 PM Bug #14405 (Resolved): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 05:22 PM Bug #14305 (Fixed with Hotfix): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 02:37 PM Bug #14305 (Resolved): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 05:22 PM Bug #14408 (Closed): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 05:22 PM Bug #14376 (Not Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 05:21 PM Bug #14367 (Fixed with Hotfix): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 02:37 PM Bug #14367 (Resolved): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 05:21 PM Bug #14529 (Fixed with Hotfix): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
- 02:42 PM Bug #14529 (Resolved): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
- not able to replicate
- 05:20 PM Bug #14619 (Closed): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- When adding function and requirement in FSR by Add From DFMEA button the added function and requirement added as blank
- 05:19 PM Bug #14388 (Closed): Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- 05:17 PM Bug #14316 (Closed): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 05:16 PM Bug #14373 (Closed): Entity->Assign process->While copying process from one entity to another entity while paste does not display hand icon
- 05:16 PM Bug #14370 (Closed): Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select the country,state and city !!" though country is selected
- 05:15 PM Bug #14301 (Closed): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 05:15 PM Bug #14618 (Open): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 05:02 PM Bug #14618 (Closed): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- In the Design VDA, for the Function/Failure Analysis, Delete option is not working as expected. If am deleting the Re...
- 05:14 PM Bug #14371 (Closed): Entity->Assign process window does not displays Labels with same size on X and Y axis
- 05:09 PM Bug #14383 (Not Resolved): Search is not working in Widget settings either by using search window or else through search grid
- Status search is not working "inactive"
- 05:05 PM Bug #14468 (Closed): Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- By default bread crumb will navigate to home page so closed as per shankar comment
- 05:04 PM Bug #14469 (Closed): Shift status is changing without save
- 05:02 PM Bug #14264 (Closed): Problem on Level Creation as Administrator
- 04:58 PM Bug #14253 (Closed): Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- When made inactive assigned process does not display in process activity it display blank
- 04:52 PM Bug #14565 (Fixed with Hotfix): change Management: In the Add Document Tree Level the draft is listed.
- 11:47 AM Bug #14565 (Resolved): change Management: In the Add Document Tree Level the draft is listed.
- 11:47 AM Bug #14565 (Open): change Management: In the Add Document Tree Level the draft is listed.
- 11:02 AM Bug #14565 (Closed): change Management: In the Add Document Tree Level the draft is listed.
- change Management: In the Add Document Tree Level the draft is listed.
- 04:50 PM Bug #14617 (Closed): Master folder tag allows to save duplicate data
- 1) Master folder tag allows to save duplicate data
2) Alert should be renamed as "Please enter the Tag Name" - 04:50 PM Bug #14615 (Open): Process VDA: Search functionality is not working
- 04:43 PM Bug #14615 (Closed): Process VDA: Search functionality is not working
- In the Process VDA wherever the Search Functionality is displaying there that functionality is not working. If we Typ...
- 04:46 PM Bug #14474 (Closed): Master tag folder allows to save and Delete blank space field
- Issue verified on 24-10-2019
- 04:26 PM Bug #14532 (Closed): Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- Not an Issue.
- 02:40 PM Bug #14532 (Resolved): Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- wad
- 02:40 PM Bug #14532: Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- wad
- 04:25 PM Bug #14397 (Closed): Switching between programs not working for Supplier PPAP &AQPQ
- 02:37 PM Bug #14397 (Resolved): Switching between programs not working for Supplier PPAP &AQPQ
- 04:22 PM Bug #14519 (Fixed with Hotfix): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- 04:17 PM Bug #14600 (Open): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- 03:01 PM Bug #14600 (Closed): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in...
- 04:17 PM Bug #14596 (Open): The buttons in the meetings page is showing as disabled( Issue with Supplier PPAP only)
- 02:49 PM Bug #14596 (Closed): The buttons in the meetings page is showing as disabled( Issue with Supplier PPAP only)
- The buttons in the meetings page is showing as disabled . Which doesn't allow to edit the meeting
- 04:17 PM Bug #14584 (Open): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 02:07 PM Bug #14584 (Closed): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- In Edge and IE after selecting the document , the document update will be shown
- 04:17 PM Bug #14582 (Open): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- 01:49 PM Bug #14582 (Closed): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs wh...
- 04:17 PM Bug #14581 (Open): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- 01:45 PM Bug #14581 (Closed): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- Assign route for change request: Document owner is showing the user who initiated the change request.
It should sho... - 04:17 PM Bug #14576 (Open): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 12:28 PM Bug #14576 (Closed): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
Changes needed... - 04:17 PM Bug #14574 (Open): In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- 12:23 PM Bug #14574 (Closed): In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- 04:17 PM Bug #14573 (Open): The concern is created along with supplier and part number, but logging in as supplier user not shows the created concern.
- 12:21 PM Bug #14573 (Closed): The concern is created along with supplier and part number, but logging in as supplier user not shows the created concern.
- The concern is created along with supplier and part number, but logging in as supplier user not shows the created con...
- 04:17 PM Bug #14571 (Open): Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- 12:09 PM Bug #14571 (Closed): Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- 04:17 PM Bug #14568 (Open): For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested approach until root causes and permanent corrective actions are identified!" even though root cause and corrective actions are provided.
- 11:53 AM Bug #14568 (Closed): For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested approach until root causes and permanent corrective actions are identified!" even though root cause and corrective actions are provided.
- For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested...
- 04:17 PM Bug #14564 (Open): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 10:49 AM Bug #14564 (Closed): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level ...
- 04:09 PM Bug #14592 (Open): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 02:33 PM Bug #14592: Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- When clicking on level selector pagination, on the 4th and 5th level the elements of diagram display randomly
Refe... - 02:26 PM Bug #14592 (Closed): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- When clicking on component level pagination, on the 4th and 5th level the elements of diagram display randomly
Ref... - 04:09 PM Bug #14585 (Open): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 02:12 PM Bug #14585 (Closed): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- Design VDA -
Structure Analysis
• Process VDA -
Structure Analysis
Functional Analysis
... - 04:08 PM Bug #14608 (Open): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- 03:29 PM Bug #14608 (Closed): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- 04:07 PM Bug #14609 (Open): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 03:43 PM Bug #14609 (Closed): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- Context Menu for Design VDA is displayed in Process VDA. All the Menus are
- 04:07 PM Bug #14612 (Open): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 03:57 PM Bug #14612 (Closed): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Ele...
- 03:52 PM Bug #14569 (In Progress): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- 01:34 PM Bug #14569 (Open): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- 11:57 AM Bug #14569 (Closed): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- Context menu is not closing even after popup is opening
- 03:35 PM Bug #14353 (Resolved): Email for Effectiveness For Findings -> Email subject is wrong.
- refer screen shot : given : "EwQIMS - Audit Pro : Effectiveness For Findings"
- 03:31 PM Bug #14591 (In Progress): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 03:00 PM Bug #14591 (Open): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 02:26 PM Bug #14591 (Closed): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- Issue occurs in both Design and Process VDA.
Functional and Failure analysis are displayed properly - 03:11 PM Bug #14456 (Yet to Verify): Reports: In the PI field its displaying the PI name as 2 times
- 02:59 PM Bug #14302 (In Progress): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 02:53 PM Bug #14527 (Fixed with Hotfix): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- 02:39 PM Bug #14527 (Resolved): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- 02:52 PM Bug #14524 (Fixed with Hotfix): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- Fixed
- 02:39 PM Bug #14524 (Resolved): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- 02:21 PM Bug #13957 (Closed): Under My deliverable list Navigate Menu is not showing for Supplier PPAP
- 01:17 PM Bug #13957 (Resolved): Under My deliverable list Navigate Menu is not showing for Supplier PPAP
- 02:21 PM Bug #13522 (Closed): Mapping parts for multiple site during project creation the address not showing up in the dropdown for all sites
- UI Change
- 01:16 PM Bug #13522 (Resolved): Mapping parts for multiple site during project creation the address not showing up in the dropdown for all sites
- 02:15 PM Bug #14578 (Open): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 12:51 PM Bug #14578 (Closed): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- • Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.
... - 01:36 PM Bug #14567 (Open): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 11:10 AM Bug #14567 (Closed): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 01:11 PM Bug #14579 (Open): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 01:08 PM Bug #14579 (Closed): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- Context menu is opening far away from the selected block. So while moving the mouse pointer, context menu is closing.
- 01:05 PM Bug #14572 (Open): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- 12:19 PM Bug #14572 (Closed): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- After Edit Effect(Remove Severity), Severity rating remains same in Diagrammatic view. But in tree/Table view it is r...
- 12:16 PM Bug #14470 (Closed): Not able to replicate:Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its showing attach rights and the inherit is checked , but dont know how the rights has been set
- Couldn't replicate this issue so closing the issue
- 12:10 PM Bug #14454 (Not Resolved): Reports: Reports is not displaying as User Specific
- 11:50 AM Bug #14434 (Not Resolved): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 14434, badge number is nt displaying. And also department, batch number, designation are shows as editable field actu...
- 11:49 AM Bug #14265 (Closed): The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- 11:49 AM Bug #14267 (Closed): Clicking on track project in SCAR form shows empty page.
- 11:49 AM Bug #14270 (Closed): In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- 11:49 AM Bug #14366 (Resolved): When the document name contains special character then selecting the document for the change request - No Response
- 11:48 AM Bug #14452 (Resolved): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 11:48 AM Bug #14275 (Not Resolved): SB-190910324 In similar concern pop up Cancel button is not working.
- 11:48 AM Bug #14533 (Resolved): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 11:47 AM Bug #14560 (Resolved): PDF disable: When viewing the deleted document from actions, shows error
- 11:47 AM Bug #14315 (Not Fixed with Hotfix): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 11:42 AM Bug #14475 (Closed): Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
- 11:41 AM Bug #14381 (Fixed with Hotfix): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- 11:01 AM Bug #14381 (Resolved): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- 11:38 AM Bug #14521 (Fixed with Hotfix): Concern number is not getting created long with Category code.
- 11:37 AM Bug #14291 (Closed): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- 11:34 AM Bug #14306 (Closed): The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- NOT able to replicate
- 11:34 AM Bug #14520 (Fixed with Hotfix): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 11:33 AM Bug #14288 (Closed): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- Fixed
- 11:30 AM Bug #14415 (Closed): In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- 11:15 AM Bug #14480 (Closed): Dont display Supplier in any of the user selection part.
- 11:15 AM Bug #14390 (In Progress): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 11:08 AM Bug #14449 (Closed): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 11:03 AM Bug #14417 (Closed): Label must be renamed as SEooC instead of SEOOC
- 10:23 AM Bug #14277 (Closed): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 10:23 AM Bug #14384 (Closed): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 10:22 AM Bug #14410 (Closed): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 09:50 AM Bug #13538 (Closed): Need to rename the the buttons and the confirmation messages
- Design issues- need to fix
- 09:38 AM Bug #14482 (Closed): Change Management- When the Requester and responsible person is same then the document change email notification is not generating
- Closed in Build
10/23/2019
- 09:13 PM Bug #14353 (In Progress): Email for Effectiveness For Findings -> Email subject is wrong.
- 05:43 PM Bug #14353 (Not Resolved): Email for Effectiveness For Findings -> Email subject is wrong.
- Still the issue occur
- 09:13 PM Bug #14363 (Resolved): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 07:10 PM Bug #14363 (Not Resolved): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- Still not implement in business rules
- 01:12 PM Bug #14363 (Resolved): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 08:51 PM Bug #14245 (Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:16 PM Bug #14245: Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Once Patch moved Change it to resolved status. Single Select change/Multiselect in process
- 03:29 PM Bug #14245 (Open): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 08:51 PM Bug #14376 (Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 04:46 PM Bug #14376 (Not Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 07:43 PM Bug #14325 (Closed): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- 07:43 PM Bug #14325: Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- verified in Cycle 3
- 07:43 PM Bug #14281 (Closed): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- Verified in cycle 3
- 07:42 PM Bug #14444 (Closed): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- Verified in cycle 3
- 07:42 PM Bug #14467 (Closed): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- Verified
- 07:37 PM Bug #14359 (Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 06:43 PM Bug #14359 (Not Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 06:43 PM Bug #14359: Closed Out -> Effectiveness Due Date field is not supporting multidate format
- Still the issue occur
- 07:16 PM Bug #14561 (Resolved): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 07:03 PM Bug #14561 (Open): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- Not an issue
- 06:33 PM Bug #14561 (Closed): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 07:16 PM Bug #14308 (Resolved): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 06:24 PM Bug #14308 (Not Resolved): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- Issue replicated to RK not fixed
- 07:08 PM Bug #14562 (Open): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 06:42 PM Bug #14562 (Closed): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- Changing the effectiveness frequently and closed the concern form displays error on the form
- 07:08 PM Bug #14560 (Open): PDF disable: When viewing the deleted document from actions, shows error
- 06:25 PM Bug #14560 (Closed): PDF disable: When viewing the deleted document from actions, shows error
- PDF disable: When viewing the deleted document from actions, shows error
- 07:08 PM Bug #14559 (Open): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- 06:13 PM Bug #14559 (Closed): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- 07:08 PM Bug #14558 (Open): In Edge browser - ECR number is shown as link
- 05:44 PM Bug #14558 (Closed): In Edge browser - ECR number is shown as link
- In Edge browser - ECR number is shown as link
- 07:08 PM Bug #14557 (Open): After Rejecting the ECR form - it shows alert- Already rejected.
- 05:25 PM Bug #14557 (Closed): After Rejecting the ECR form - it shows alert- Already rejected.
- After Rejecting the ECR form - it shows alert- Already rejected.
- 07:08 PM Bug #14555 (Open): Initiate Concern: When the Supplier was selected from the dropdown list its displaying JS Error
- 04:55 PM Bug #14555 (Closed): Initiate Concern: When the Supplier was selected from the dropdown list its displaying JS Error
- In the Initiate Concern Window, when the User selecting the Supplier from the dropdown list its displaying JS Error a...
- 07:08 PM Bug #14554 (Open): Document name with special character and custom revision not working as expected.
- 04:54 PM Bug #14554 (Closed): Document name with special character and custom revision not working as expected.
- Document name with special character and custom revision not working as expected.
Clicking on document name with s... - 06:57 PM Bug #14354 (Closed): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- 06:57 PM Bug #14354: Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- Verified in cycle 3
- 06:53 PM Bug #14360 (Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- check the scree shot, 'not verified' is default status
- 06:43 PM Bug #14360 (Not Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- Still the issue occur
- 06:28 PM Bug #14459 (Closed): LPA : Submit button is available even after finding is closeout bu auditor
- Duplicate issue so closed but still not resolved
- 06:28 PM Bug #14307 (Closed): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- 06:27 PM Bug #14336 (Closed): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- 06:27 PM Bug #14534 (Fixed with Hotfix): Unable to create concern from Inspection control
- 04:23 PM Bug #14534 (Open): Unable to create concern from Inspection control
- 12:56 PM Bug #14534 (Closed): Unable to create concern from Inspection control
- Unable to create concern from Inspection control
- 06:23 PM Bug #14328 (Closed): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- 06:22 PM Bug #14324 (Closed): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 06:21 PM Bug #14317 (Closed): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 06:17 PM Bug #14312 (Closed): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 06:14 PM Bug #14279 (Closed): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- Verified in SP_915 CY-3
- 03:25 PM Bug #14279: LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- Issue verified in SP915 Cy-3
- 06:14 PM Bug #14433 (Closed): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- Verified in SP_915 CY-3
- 06:13 PM Bug #14446 (Closed): LPA : Mandatory auditee response is not working as expected for OFI
- Verified in SP_915 CY-3
- 06:10 PM Bug #14297 (Closed): LPA : while attaching attachment in 8D form displays error
- Issue verified in PS-915 CY-3
- 06:09 PM Bug #14455 (Closed): When tried to enter Department name manually in 5why form of 7D approach displays error
- Issue verified in SP_915 cy-3
- 06:07 PM Bug #14302: Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- Filter is working based on Operation Category alone.
While selecting FourM Category it displays wrong result - 06:03 PM Bug #14302 (Not Resolved): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 06:04 PM Bug #14442 (Closed): LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- Issue verified in SP_915 Cy-3
- 06:01 PM Bug #14326: Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Verified
- 05:30 PM Bug #14326 (Closed): Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Verified
- 06:00 PM Bug #14300 (Closed): Attached attachment name displays in number format after attached
- Issue verified in SP915 Cy-3
- 05:56 PM Bug #13905 (Closed): When Project is not selected and from project listing and initiating change request from APQP (With approval) is not working.
- 05:56 PM Bug #14389 (Reopen): Linking supplier primary contact responsible for all tasks is not working
- Supplier contact person not assigned as resource by default
- 04:06 PM Bug #14389 (Closed): Linking supplier primary contact responsible for all tasks is not working
- closed in build
- 05:52 PM Bug #14276 (Not Resolved): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 05:52 PM Bug #14521 (Resolved): Concern number is not getting created long with Category code.
- 04:27 PM Bug #14521 (Open): Concern number is not getting created long with Category code.
- 11:53 AM Bug #14521 (Closed): Concern number is not getting created long with Category code.
- Concern number is not getting created long with Category code.
- 05:48 PM Bug #14544 (In Progress): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 04:20 PM Bug #14544 (Open): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 03:09 PM Bug #14544 (Closed): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- While clicking OK button directly without doing any changes, popup window is not closing
- 05:47 PM Bug #14361 (Closed): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- 05:47 PM Bug #14361: Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- Verified in cycle 3
- 05:47 PM Bug #14556 (In Progress): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- 05:47 PM Bug #14556 (Open): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- 05:09 PM Bug #14556 (Closed): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- In the Process VDA, The Function/Failure Analysis Menu is not loading the Page when the User Opens the VDA through th...
- 05:47 PM Bug #14515 (Fixed with Hotfix): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- Score calculation for checklists is working as expected
- 12:20 PM Bug #14515 (Resolved): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- Conflicted with Audit pro Score
- 09:45 AM Bug #14515 (Open): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- 05:46 PM Bug #14518 (Fixed with Hotfix): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- Able to see the parent checklists score has applier for its child(checkpoints)
- 01:40 PM Bug #14518 (Resolved): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- 09:45 AM Bug #14518 (Open): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- 05:45 PM Suggestion #14339 (Closed): Invalid URL prompt message need to be changed. Instead of "URL Error" change it to "Please specify Valid URL"
- 05:41 PM Bug #14520 (Resolved): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 04:27 PM Bug #14520 (Open): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 11:16 AM Bug #14520 (Closed): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 05:34 PM Bug #14289 (Closed): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- 05:32 PM Bug #14392 (Closed): When the ECR form is submitted for approval then the requestor and approver can able to delete the documents which are already requested. It should not allow to delete the document request
- 05:28 PM Bug #14457 (Resolved): Multi site->Audit program: Remove this alert message for clause in multi site
- 05:11 PM Bug #14457 (In Progress): Multi site->Audit program: Remove this alert message for clause in multi site
- 04:42 PM Bug #14457 (Not Resolved): Multi site->Audit program: Remove this alert message for clause in multi site
- 04:42 PM Bug #14457: Multi site->Audit program: Remove this alert message for clause in multi site
- Need to fix this issue
- 05:26 PM Bug #14550 (Resolved): Remarks/Objective Evidence field does not display entered data when retrieved
- 04:26 PM Bug #14550 (Open): Remarks/Objective Evidence field does not display entered data when retrieved
- 03:51 PM Bug #14550 (Closed): Remarks/Objective Evidence field does not display entered data when retrieved
- Remarks/Objective Evidence field does not display entered data when retrieved
- 05:21 PM Bug #14436 (Yet to Verify): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- need to discuss with bijoy
- 05:21 PM Bug #14292 (Yet to Verify): Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- 05:21 PM Bug #14428 (Resolved): LPA :Holiday alert is not displayed when selected the day which is holiday
- 05:17 PM Bug #14428 (Not Resolved): LPA :Holiday alert is not displayed when selected the day which is holiday
- 05:20 PM Bug #14448 (Yet to Verify): Checklist page-> Minus value are displayed in Score value text box box
- 05:13 PM Bug #14448 (Resolved): Checklist page-> Minus value are displayed in Score value text box box
- Make it as TBD. Other wise issue will take in count
- 04:42 PM Bug #14448 (Not Resolved): Checklist page-> Minus value are displayed in Score value text box box
- Need to discuss with bijoy
- 05:19 PM Bug #14397 (Not Resolved): Switching between programs not working for Supplier PPAP &AQPQ
- Still not able to switch .
- 05:19 PM Bug #14409 (Closed): Even after rejection also the ECR form window is not closing and the change document request action is not removed for the user also
- 05:19 PM Bug #14327 (Closed): Email for Effectiveness For Findings->Some fields are missing in emails content
- 05:18 PM Bug #14327: Email for Effectiveness For Findings->Some fields are missing in emails content
- font type is different
- 05:16 PM Bug #14286 (Closed): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- Verified
- 05:15 PM Bug #14463 (Closed): Remainder/Escalation mail -> effectiveness -> Count display is incorrect. I have verified and validation only one finding but it show 3 finding in content
- Verified in cycle 3
- 10:30 AM Bug #14463 (Resolved): Remainder/Escalation mail -> effectiveness -> Count display is incorrect. I have verified and validation only one finding but it show 3 finding in content
- 05:12 PM Bug #14519 (Resolved): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- 04:23 PM Bug #14519 (Open): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- 11:15 AM Bug #14519 (Closed): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it ...
- 05:10 PM Bug #14352 (Closed): CM: Before the ECR form gets approve the Change request actions are listed for the Responsibility person.
- 05:09 PM Bug #14362 (Closed): Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request status as "Incomplete"
- 04:59 PM Bug #14311 (Yet to Verify): Effectiveness for findings: Audit programs effective due days are not saving
- need to discuss with bijoy
- 04:55 PM Bug #14311 (Resolved): Effectiveness for findings: Audit programs effective due days are not saving
- 04:25 PM Bug #14311 (Not Resolved): Effectiveness for findings: Audit programs effective due days are not saving
- 04:24 PM Bug #14311: Effectiveness for findings: Audit programs effective due days are not saving
- Data is save, input value is 1000, but show 99 in effectiveness text box
- 04:51 PM Bug #14541 (In Progress): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 04:20 PM Bug #14541 (Open): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 02:53 PM Bug #14541 (Closed): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- Changes made in both the Popup windows are not reflected anywhere
- 04:51 PM Bug #14538 (In Progress): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 04:20 PM Bug #14538 (Open): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 02:10 PM Bug #14538 (Closed): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is remo...
- 04:50 PM Bug #14537 (In Progress): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 04:20 PM Bug #14537 (Open): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 01:10 PM Bug #14537 (Closed): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- THLEditCharacteristics and THLDeleteChacteristics is displayed in Functional Analysis
THLEditCharacteristics and T... - 04:48 PM Bug #14540 (In Progress): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 04:20 PM Bug #14540 (Open): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 02:27 PM Bug #14540 (Closed): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- • While selecting Delete Characteristics option, system displays Edit FourM Pop window in header but displays Operati...
- 04:47 PM Bug #14414 (Closed): Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- Issue verified in SP-915 Cy-3
- 04:44 PM Bug #14477 (Closed): VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- Able to view/edit checklists details
- 04:43 PM Bug #14407 (Closed): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- 04:43 PM Bug #14407: Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Nikhil already discussed, SO closing this issue
- 02:33 PM Bug #14407 (Resolved): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Not an issue. It is Heading for NC and OFI
- 02:13 PM Bug #14407 (Not Resolved): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- 02:13 PM Bug #14407: Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Heading should be right align is not fixed
- 04:43 PM Bug #14516 (Closed): Parts name displaying twice in supplier engagement model screen against its location
- working fine
- 11:23 AM Bug #14516 (Resolved): Parts name displaying twice in supplier engagement model screen against its location
- 09:45 AM Bug #14516 (Open): Parts name displaying twice in supplier engagement model screen against its location
- 04:37 PM Bug #14390 (Not Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 11:28 AM Bug #14390 (Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 04:35 PM Bug #14498 (Closed): Not able to create a Supplier PPAP program for a supplier with one part to different location
- Closed in build
- 04:35 PM Bug #14453 (Closed): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- 01:10 PM Bug #14453 (Fixed with Hotfix): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- Verified in cycle 3
- 04:31 PM Bug #14528 (Open): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 12:31 PM Bug #14528 (Closed): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 04:31 PM Bug #14525 (Open): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- 12:25 PM Bug #14525 (Closed): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- Tree Diagrams: Undo and Redo button is not working in Tree diagrams
- 04:30 PM Bug #14539 (Open): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 02:12 PM Bug #14539 (Closed): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected i...
- 04:28 PM Bug #14547 (Open): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- 03:33 PM Bug #14547 (Closed): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- when deleting the decomposed function and requirement ASIL, It does not revert back to the old ASIL value
- 04:27 PM Bug #14529 (Open): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
- 12:34 PM Bug #14529 (Closed): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
- 04:27 PM Bug #14552 (Open): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 03:57 PM Bug #14552 (Closed): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- After collapsing the element and again clicking on the Expand arrow, arrow is disappearing.
- 04:26 PM Bug #14551 (Open): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- 03:55 PM Bug #14551 (Closed): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- In Main2, For the Selected Header Press the "Ctrl+UP Arrow" Key or "Ctrl+DOWN Arrow" Key or "Ctrl+LEFT Arrow" Key or ...
- 04:25 PM Bug #14532 (Open): Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- 12:45 PM Bug #14532 (Closed): Given Supplier as optional in charter template and Select template from the project/program charter page . After clicking on save getting alert "You have selected both template and BOM"
- Given Supplier as optional in charter template and Select template from the project/program charter page . After clic...
- 04:25 PM Bug #14524 (Open): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- 12:13 PM Bug #14524 (Closed): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- Created a program with same part/supplier with 2 different location. In the project charter page both the details(2 l...
- 04:24 PM Bug #14527 (Open): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- 12:27 PM Bug #14527 (Closed): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- After creating a Program/Project along with the selected supplier users the admin user of another supplier is also li...
- 04:24 PM Bug #14553 (In Progress): Design and Process VDA - Percentage allocation displays 7th Step
- 04:20 PM Bug #14553 (Open): Design and Process VDA - Percentage allocation displays 7th Step
- 04:02 PM Bug #14553 (Closed): Design and Process VDA - Percentage allocation displays 7th Step
- Percentage allocation displays 7th Step
- 04:23 PM Bug #14535 (Open): On clicking on Chart hyperlink in Receiving Inspection sheet server error pop-up is displayed
- 01:01 PM Bug #14535 (Closed): On clicking on Chart hyperlink in Receiving Inspection sheet server error pop-up is displayed
- On clicking on Chart hyperlink in Receiving Inspection sheet Server error pop-up is displayed
Charts are opening on ... - 04:21 PM Bug #14533 (Open): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 12:52 PM Bug #14533 (Closed): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- New document request: Alert message is showing to change the doc number and name even the folder doesn't have the doc...
- 04:20 PM Bug #14548 (Open): Process VDA - Topic segment is not changed even after changing the Production Item
- 03:40 PM Bug #14548 (Closed): Process VDA - Topic segment is not changed even after changing the Production Item
- Topic segment is not changed even after changing the Production Item.
It displays the Topic Segment of previously ... - 04:20 PM Bug #14543 (Open): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- 03:01 PM Bug #14543 (Closed): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- 04:20 PM Bug #14526 (Open): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 12:26 PM Bug #14526 (Closed): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is cha...
- 04:20 PM Bug #14522 (Open): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 11:57 AM Bug #14522 (Closed): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- In the Segment Selection Window (In Process VDA wherever this Segment Selection Window displaying) for the Single Seg...
- 04:05 PM Bug #14398 (Closed): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- Issue verified in SP915 CY-3
- 02:02 PM Bug #14398 (Resolved): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- 01:19 PM Bug #14398 (Not Resolved): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- System not allows to select approval process though approval process is enables
- 04:05 PM Bug #14366 (Not Resolved): When the document name contains special character then selecting the document for the change request - No Response
- 04:01 PM Bug #14331 (Closed): checkpoint logic is not displaying in Fill checklist screen though it is defined
- Issue verified in SP_915 CY-3
- 04:01 PM Bug #14285 (Closed): LPA : Add audit activities window is not displaying Respective auditor of the particular audit
- Issue verified in SP_915 Cy-3
- 04:00 PM Bug #14322 (Yet to Verify): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- Automatic findings are not generating so not able to verify this issue
- 03:55 PM Bug #14322 (Resolved): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 03:51 PM Bug #14322 (Reopen): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 03:47 PM Bug #14322 (Closed): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- Issue verified in SP_915 CY-3
- 04:00 PM Bug #13538: Need to rename the the buttons and the confirmation messages
- Issue 1 Closed.
- 03:32 PM Bug #14536 (Resolved): LPA : Auditor and Auditee availability email is not generating
- 03:27 PM Bug #14536 (Open): LPA : Auditor and Auditee availability email is not generating
- 01:08 PM Bug #14536 (Closed): LPA : Auditor and Auditee availability email is not generating
- 1) Auditor and Auditee availability email is not generating
2) When clicked on send confirmation email for firs... - 03:26 PM Bug #14380 (Not Resolved): The document viewer publish is not working getting object reference not set error
- 03:26 PM Bug #14348 (Closed): Issue with Output document attachment in Document viewer after selecting "Is Output Document Required ?=No.
- Closed in the BUild
- 03:24 PM Bug #14329 (Closed): Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
- Closed in Build
- 03:24 PM Bug #14294 (Not Resolved): While approving the respective action in approver login displays dual window after approver
- 03:23 PM Bug #14291 (Not Resolved): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- 03:20 PM Bug #14290 (Closed): LPA : Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan waiting for approval" alert message
- Issue verified in SP_915 Cy-3
- 03:19 PM Bug #14288 (Not Resolved): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- 03:06 PM Bug #14278 (Closed): LPA : while creating equipment under manufacturing line displays error
- Issue verified in SP_915 Cy-3
- 03:05 PM Bug #14271 (Closed): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- Issue verified in SP_915 Cy-3
- 03:05 PM Bug #14258 (Closed): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- Issue verified in SP_915 Cy-3
- 03:03 PM Bug #14268 (Closed): Template to project conversion - Showing error Supplier PPAP
- Closed in Build
- 03:00 PM Bug #14309 (Closed): "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- Closed in Build
- 02:58 PM Bug #14272 (Closed): Archive Project is not site specific.
- Closed in Build
- 02:53 PM Bug #14412 (Closed): After working on the programs in the nested view the gantt page getting blank
- Closed in Build
- 02:52 PM Bug #14412: After working on the programs in the nested view the gantt page getting blank
- Closed in build
- 02:51 PM Bug #14416 (Closed): The task rating color is not compatable with the text color of %completion option
- Closed in Build
- 02:50 PM Bug #14483 (Closed): Not able to attach draft document using special characters in file and document name
- Closed in cycle 3
- 02:23 PM Bug #14323 (Closed): When trying to delete the document from the ECN form then in the prompt it shows "error" before the alert message.
- 02:17 PM Bug #14464 (Yet to Verify): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- Audit date is not displayed after publish multiple time
- 02:08 PM Bug #14313 (Closed): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- Verified in cycle 3
- 01:35 PM Bug #14345 (Closed): Supplier -> Spell mistake in various pages / Content change in alert message
- Verified in cycle 3
- 01:32 PM Bug #14423 (Closed): LPA : Drop down button need to be displayed on RHS for the Checkpoints
- 01:32 PM Bug #14426 (Closed): LPA: Time Period as "month" should not allow to select Past months from the Calendar month selection
- As per nikhil comment closing this issue but my concern is why system is allowing to select past months though lpa wi...
- 01:26 PM Bug #14411 (Closed): Page is not responding when clicked on save in Audit assign screen
- Issue verified in SP_915 CY-3
- 01:22 PM Bug #14401 (Closed): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- 12:56 PM Bug #14401 (Fixed with Hotfix): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- Verified in Cycle 3
- 01:21 PM Bug #14403 (Closed): AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- 01:21 PM Bug #14403: AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- Verified in cycle 3
- 01:21 PM Bug #14530 (Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 01:21 PM Bug #14530 (Open): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 12:35 PM Bug #14530 (Closed): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 01:16 PM Bug #14466 (Closed): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- verified in cycle 3
- 01:08 PM Bug #14466 (Fixed with Hotfix): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Verified in cycle3
- 01:14 PM Bug #14396 (Closed): Multi Site : Layer creation is not displaying all the modes available displays only Shift mode
- Issue verified in SP_915 Cy-3
- 01:14 PM Bug #14402 (Closed): Multi Site: Duplicate equipment are displaying in LPA schedule screen
- Issue verified in SP_915 Cy-3
- 01:13 PM Bug #14296 (Closed): Auditee response/Report: Date of audit is not displayed in Auditee response report
- Verified in cycle 3
- 01:09 PM Bug #14437 (Fixed with Hotfix): Inprocess Inspection sheet is not opening from supervisor approval menu
- 01:04 PM Bug #14437 (Resolved): Inprocess Inspection sheet is not opening from supervisor approval menu
- 01:08 PM Bug #14458 (Fixed with Hotfix): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- 01:04 PM Bug #14458 (Resolved): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- 01:05 PM Bug #14356 (Closed): Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- working fine
- 01:05 PM Bug #14355 (Closed): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- working fine
- 01:04 PM Bug #14422 (Closed): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- Working fine
- 12:52 PM Bug #14391 (Closed): When creating a program using Master Template then the added supplier project is not listed in the Vendor view as well as for SQE , SQM and Supplier contact person.
- Master Template - Add project concept is changed
Master Template - Need to Map template - 12:43 PM Bug #14379 (Yet to Verify): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
- 12:42 PM Bug #14405 (Not Resolved): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 12:36 PM Bug #14310 (Closed): Changing the status of the project charter, the status view icon is missing in the project charter page
- 12:18 PM Bug #14310 (Resolved): Changing the status of the project charter, the status view icon is missing in the project charter page
- 12:36 PM Bug #14367 (Not Resolved): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 12:19 PM Bug #13957: Under My deliverable list Navigate Menu is not showing for Supplier PPAP
- WAD
- 12:06 PM Bug #14523 (Open): Action Management: Action name is displaying twice.
- 12:01 PM Bug #14523 (Closed): Action Management: Action name is displaying twice.
- Action Management: Action name is displaying twice in the action screen.
- 11:57 AM Bug #14333 (Closed): Terminating the second revision document shows the document status as "Awaiting approval". (Local document and aqua document and URL Publish)
- 11:40 AM Bug #14346 (Closed): Without selecting the project when change request is initiated then in the project listing screen - "Select project " prompt is displayed.
- 11:38 AM Bug #14341 (Closed): Project and supplier icon is not listed in the System tree view for the program
- 11:37 AM Bug #14319 (Closed): In Program - Deliverable name is not displayed in the risk register.
- 11:33 AM Bug #14305 (Not Resolved): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 11:32 AM Bug #14335 (Closed): Need output document icon for the URL link attachments only for URL Link icon is missing
- 11:31 AM Bug #14287 (Closed): Regression: select a Draft project and Click on Projects menu, the project listing screen is opening in the new tab.(Change the pillar and click on projects menu)
- 11:31 AM Bug #14277 (Resolved): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 11:31 AM Bug #14342 (Closed): Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- 11:31 AM Bug #14293 (Closed): Not able to publish the charter of Change management initiated project.
- 11:30 AM Bug #14280 (Closed): Not able to attach document from DocPro - Not working
- 11:24 AM Bug #14517 (Resolved): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Approval process is not selected automatically for multi site.Handled
- 09:44 AM Bug #14517 (Open): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- 10:00 AM Bug #14269 (Closed): Regression: Template it is showing the output icon for the attached input document.
- 09:45 AM Bug #14513 (Open): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- 09:44 AM Bug #14514 (Open): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
10/22/2019
- 06:33 PM Bug #14518 (Closed): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- 06:28 PM Bug #14517 (Closed): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though busi...
- 06:27 PM Bug #14516 (Closed): Parts name displaying twice in supplier engagement model screen against its location
- Parts name displaying twice in supplier engagement model screen against its location
- 06:26 PM Bug #14515 (Closed): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- VAM audit-Checklists Score calculation is wrong
- 05:44 PM Bug #14514 (Closed): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
Refer... - 05:35 PM Bug #14513 (Closed): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- Indicator indicates the flow down has done even when there no flow down is done.
- 04:24 PM Bug #14337 (Closed): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- 04:19 PM Bug #14476 (Closed): Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supplier users irrespective of doc pro settings level selection
- 04:15 PM Bug #14203 (Closed): When entering document name with special character then it shows different alert. Show common alert when the special characters are not accepted.Same for file name which has spl char(Attached the doc for ref))
- 04:13 PM Bug #14274 (Closed): Groups: When creating a new group, By default view documents rights should be checked
- 04:09 PM Bug #14439 (Closed): Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision as A in email
- 03:37 PM Bug #14306 (Resolved): The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- 03:37 PM Bug #14306: The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- not replicated
- 03:36 PM Bug #14380 (Resolved): The document viewer publish is not working getting object reference not set error
- Not replicated
- 03:36 PM Bug #14288 (Resolved): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- 03:35 PM Bug #14291 (Resolved): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- 03:34 PM Bug #14293 (Resolved): Not able to publish the charter of Change management initiated project.
- 03:11 PM Bug #14293: Not able to publish the charter of Change management initiated project.
- Issue Closed
- 03:33 PM Bug #14305 (Resolved): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 03:33 PM Bug #14309 (Resolved): "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- 03:32 PM Bug #14367 (Resolved): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 03:30 PM Bug #14268 (Resolved): Template to project conversion - Showing error Supplier PPAP
- 03:30 PM Bug #14269 (Resolved): Regression: Template it is showing the output icon for the attached input document.
- 02:52 PM Bug #14269: Regression: Template it is showing the output icon for the attached input document.
- Issue closed
output icon will be displayed but clicking on output icon will not populate the output attachment window - 03:30 PM Bug #14272 (Resolved): Archive Project is not site specific.
- 03:29 PM Bug #14280 (Resolved): Not able to attach document from DocPro - Not working
- 03:29 PM Bug #14287 (Resolved): Regression: select a Draft project and Click on Projects menu, the project listing screen is opening in the new tab.(Change the pillar and click on projects menu)
- 03:28 PM Bug #14333 (Resolved): Terminating the second revision document shows the document status as "Awaiting approval". (Local document and aqua document and URL Publish)
- 03:27 PM Suggestion #14339 (Resolved): Invalid URL prompt message need to be changed. Instead of "URL Error" change it to "Please specify Valid URL"
- Not an issue . put it in suggestion
- 03:26 PM Bug #14335 (Resolved): Need output document icon for the URL link attachments only for URL Link icon is missing
- WAD
- 03:25 PM Bug #14342 (Resolved): Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- 03:25 PM Bug #14346 (Resolved): Without selecting the project when change request is initiated then in the project listing screen - "Select project " prompt is displayed.
- 03:24 PM Bug #14348 (Resolved): Issue with Output document attachment in Document viewer after selecting "Is Output Document Required ?=No.
- 03:24 PM Bug #14379 (Resolved): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
- 03:23 PM Bug #14389 (Resolved): Linking supplier primary contact responsible for all tasks is not working
- 03:23 PM Bug #14391 (Resolved): When creating a program using Master Template then the added supplier project is not listed in the Vendor view as well as for SQE , SQM and Supplier contact person.
- 03:22 PM Bug #14397 (Resolved): Switching between programs not working for Supplier PPAP &AQPQ
- WAD
- 03:22 PM Bug #14405 (Resolved): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 03:21 PM Bug #14412 (Resolved): After working on the programs in the nested view the gantt page getting blank
- 03:21 PM Bug #14416 (Resolved): The task rating color is not compatable with the text color of %completion option
- 03:19 PM Bug #14483 (Resolved): Not able to attach draft document using special characters in file and document name
- 03:18 PM Bug #14498 (Resolved): Not able to create a Supplier PPAP program for a supplier with one part to different location
- 03:13 PM Bug #14443 (Closed): Multilanguage:Customize email message:User should customize language specific emails. The content customize in English should not be reflected for all languages
- 03:06 PM Bug #14452 (Not Resolved): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- Fixed in Document management not in TOC
- 02:47 PM Bug #14494 (Closed): Process VDA: Process Flow Tool Tip is displaying wrongly
- This issue is fixed and closing this issue on 22.10.2019
- 02:46 PM Bug #14447 (Closed): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- This issue is fixed and closing this issue on 22.10.2019
- 02:42 PM Bug #14427 (Closed): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- This issue is fixed and closing this issue on 22.10.2019
- 02:42 PM Bug #14425 (Closed): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- This issue is fixed and closing this issue on 22.10.2019
- 02:32 PM Bug #14431 (Closed): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- This issue is fixed in the Cycle-3 so closing this issue on 22.10.2019
- 01:15 PM Bug #14245: Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Change the issue to open. by mistake change status as resolved. I cannot able to change status to open.. Issue fix Ne...
- 12:50 PM Bug #14315 (Resolved): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
10/21/2019
- 11:16 PM Bug #14456 (Resolved): Reports: In the PI field its displaying the PI name as 2 times
- 11:16 PM Bug #14454 (Resolved): Reports: Reports is not displaying as User Specific
- 11:16 PM Bug #14436 (Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 11:16 PM Bug #14432 (Resolved): Findings Report ->Benchmark data is not displayed in Findings Reports.
- 10:10 PM Feature/Enhancement #14413 (Resolved): Supplier portal module should be display in social media
- For Supplier Portal, there is already Social media is available, for that Have to select the SocialMedia layout in Ad...
- 10:06 PM Feature/Enhancement #14385 (In Progress): User log->when session is expired system is not considering the logout time
- 10:06 PM Bug #13538: Need to rename the the buttons and the confirmation messages
- Not able to fix "Design issues with the user details" for AutoReset due to Limitations with AD groups Page.
- 03:12 PM Bug #13538 (Resolved): Need to rename the the buttons and the confirmation messages
- 09:52 PM Bug #14297 (Resolved): LPA : while attaching attachment in 8D form displays error
- not able to reproduce
- 09:50 PM Bug #14270 (Resolved): In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- not able to replicate
- 09:46 PM Bug #14300 (Resolved): Attached attachment name displays in number format after attached
- not able to reproduce
- 09:40 PM Bug #14461 (In Progress): Assign Checklist-> Max and min button need to displayed in assign checklist page
- 05:49 PM Bug #14461 (Not Fixed with Hotfix): Assign Checklist-> Max and min button need to displayed in assign checklist page
- 05:49 PM Bug #14461: Assign Checklist-> Max and min button need to displayed in assign checklist page
- Still the issue occurs
- 09:40 PM Bug #14398 (Resolved): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- 09:40 PM Bug #14453 (Resolved): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- Not able to replicate. if get this issue inform us to fix immediately
- 09:29 PM Bug #14455 (Resolved): When tried to enter Department name manually in 5why form of 7D approach displays error
- 09:20 PM Bug #14388: Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- ADD button is not applicable for WidgetPreferences
- 09:18 PM Bug #14370 (Resolved): Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select the country,state and city !!" though country is selected
- 09:17 PM Bug #14383 (Resolved): Search is not working in Widget settings either by using search window or else through search grid
- 08:12 PM Bug #14302 (Resolved): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 02:51 PM Bug #14302 (Not Fixed with Hotfix): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 11:35 AM Bug #14302 (Resolved): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 10:52 AM Bug #14302 (In Progress): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 08:12 PM Bug #14316 (Resolved): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 03:09 PM Bug #14316 (Not Fixed with Hotfix): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- Child of the External elements are not allowed to expand
- 11:35 AM Bug #14316 (Resolved): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 08:07 PM Bug #14308 (Resolved): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 07:58 PM Bug #14317 (Fixed with Hotfix): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 04:54 PM Bug #14317 (Resolved): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 03:25 PM Bug #14317 (Not Fixed with Hotfix): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- After Expand and Collapse is done context menu is opening at random areas
- 11:35 AM Bug #14317 (Resolved): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 07:57 PM Bug #14336 (Fixed with Hotfix): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- 04:46 PM Bug #14336 (Resolved): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- this not fixed
- 03:38 PM Bug #14336 (Not Fixed with Hotfix): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- First element is displayed partially in Process VDA- Structure Analysis
- 12:48 PM Bug #14336 (Resolved): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- 07:56 PM Bug #14301 (Fixed with Hotfix): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 04:57 PM Bug #14301 (Resolved): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 02:47 PM Bug #14301 (Not Fixed with Hotfix): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- Context menu options for Cause is not working.
- 11:05 AM Bug #14301 (Resolved): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 07:52 PM Bug #14449 (Resolved): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 07:09 PM Bug #14449 (In Progress): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 05:27 PM Bug #14449 (Not Resolved): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 11:08 AM Bug #14449 (Resolved): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 10:51 AM Bug #14449 (In Progress): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 07:42 PM Bug #14275 (Resolved): SB-190910324 In similar concern pop up Cancel button is not working.
- 06:26 PM Bug #14296 (Resolved): Auditee response/Report: Date of audit is not displayed in Auditee response report
- Duplicate issue #14096
- 06:25 PM Bug #14415 (Resolved): In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- 06:25 PM Bug #14434 (Resolved): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 06:24 PM Bug #14480 (Resolved): Dont display Supplier in any of the user selection part.
- 09:56 AM Bug #14480 (Open): Dont display Supplier in any of the user selection part.
- 06:22 PM Bug #14452 (Resolved): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 02:52 PM Bug #14452 (WAD): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 06:20 PM Bug #14264 (Resolved): Problem on Level Creation as Administrator
- 06:20 PM Bug #14474 (Resolved): Master tag folder allows to save and Delete blank space field
- 06:20 PM Bug #14350 (Resolved): NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clciking on "Submit to auditee" button
- 06:04 PM Bug #14325 (Fixed with Hotfix): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- Verified in Cycle2 in 21/10.2019
- 05:57 PM Bug #14444 (Fixed with Hotfix): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- 05:57 PM Bug #14444: Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- Verified in cycle 2 21/10/2019
- 05:49 PM Bug #14267 (Resolved): Clicking on track project in SCAR form shows empty page.
- 05:48 PM Bug #14265 (Resolved): The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- 05:47 PM Bug #14337 (Fixed with Hotfix): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- 05:32 PM Bug #14337 (Resolved): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- 05:30 PM Bug #14298 (Resolved): Process VDA - There is no option to add Severity for the added Effect.
- 02:21 PM Bug #14298 (Not Fixed with Hotfix): Process VDA - There is no option to add Severity for the added Effect.
- 11:35 AM Bug #14298 (Resolved): Process VDA - There is no option to add Severity for the added Effect.
- 10:52 AM Bug #14298 (In Progress): Process VDA - There is no option to add Severity for the added Effect.
- 05:27 PM Bug #14467 (Fixed with Hotfix): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- Clauses is displayed.Verified in cycle2 905 on 21/10/2019
- 01:09 PM Bug #14467 (Resolved): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- Resolved in hotfix
- 05:25 PM Bug #14473 (Resolved): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 04:05 PM Bug #14473 (Not Fixed with Hotfix): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 11:34 AM Bug #14473 (Resolved): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 05:25 PM Bug #14408 (Resolved): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 04:02 PM Bug #14408 (Not Fixed with Hotfix): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 11:34 AM Bug #14408 (Resolved): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 05:21 PM Bug #14387 (Resolved): Suite: First name,middle name,last name separation is not valid
- 05:16 PM Bug #14435 (Closed): Both IE & Chrome: All the PI Names displaying as "Edit Element"
- 05:15 PM Bug #14435 (Fixed with Hotfix): Both IE & Chrome: All the PI Names displaying as "Edit Element"
- 05:00 PM Bug #14410 (Resolved): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 04:53 PM Bug #14410 (In Progress): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 04:37 PM Bug #14410 (Not Resolved): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 11:08 AM Bug #14410 (Resolved): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 10:51 AM Bug #14410 (In Progress): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 04:45 PM Bug #14440 (Closed): Template1->We are not able to enter the Score value in Template 1
- 04:45 PM Bug #14440: Template1->We are not able to enter the Score value in Template 1
- okay.Closed this issues
- 04:38 PM Bug #14277 (Not Resolved): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 11:04 AM Bug #14277 (Resolved): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 04:37 PM Bug #14390 (Not Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 11:35 AM Bug #14390 (Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 10:49 AM Bug #14390 (In Progress): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 04:19 PM Bug #14281 (Fixed with Hotfix): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- Verified in Cycle2 on 21/10/2019
- 04:09 PM Bug #14321 (Fixed with Hotfix): Header for Focus Element is displayed as Topic Element
- 11:08 AM Bug #14321 (Resolved): Header for Focus Element is displayed as Topic Element
- 10:51 AM Bug #14321 (In Progress): Header for Focus Element is displayed as Topic Element
- 03:36 PM Bug #14481: Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- Notify administrator new document creation please check this as well
- 02:51 PM Bug #14481 (WAD): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 03:31 PM Bug #14328 (Fixed with Hotfix): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- 12:49 PM Bug #14328 (Resolved): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- Fixed and patches ready for testing
- 03:30 PM Bug #14324 (Fixed with Hotfix): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 11:05 AM Bug #14324 (Resolved): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 03:13 PM Bug #14439 (Resolved): Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision as A in email
- 03:12 PM Bug #14341 (Resolved): Project and supplier icon is not listed in the System tree view for the program
- 02:59 PM Bug #14312 (Fixed with Hotfix): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 11:05 AM Bug #14312 (Resolved): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 02:50 PM Bug #14459 (Resolved): LPA : Submit button is available even after finding is closeout bu auditor
- Duplicate Issue :#14308
- 02:50 PM Bug #14431 (Fixed with Hotfix): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- 02:48 PM Bug #14427 (Fixed with Hotfix): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- 10:04 AM Bug #14427 (Resolved): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- 02:47 PM Bug #14464 (Resolved): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- verify in next build patch needs to move
- 02:33 PM Bug #14425 (Fixed with Hotfix): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- 02:15 PM Bug #14447 (Fixed with Hotfix): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- 11:07 AM Bug #14447 (Resolved): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- 02:14 PM Bug #14494 (Fixed with Hotfix): Process VDA: Process Flow Tool Tip is displaying wrongly
- 11:07 AM Bug #14494 (Resolved): Process VDA: Process Flow Tool Tip is displaying wrongly
- 02:12 PM Bug #14289 (Fixed with Hotfix): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- 12:46 PM Bug #14289 (Resolved): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- Fixed and patches ready for testing
- 02:04 PM Bug #14373 (Resolved): Entity->Assign process->While copying process from one entity to another entity while paste does not display hand icon
- 01:35 PM Bug #14477 (Resolved): VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- Verified as hotfix
- 12:32 PM Bug #14477: VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- Perform VAM audit
Go to corrective action close out->Click on view/edit checklists
Observe,
No checklists found is... - 01:25 PM Bug #14500 (Resolved): (Multi Browser - Chrome) Process VDA - Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- 09:56 AM Bug #14500 (Open): (Multi Browser - Chrome) Process VDA - Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- 01:20 PM Bug #14493 (Resolved): Multi Browser(Chrome & Firefox) - Design VDA - system displays the Context element as selected while opening Functional/Failure Analysis
- 09:56 AM Bug #14493 (Open): Multi Browser(Chrome & Firefox) - Design VDA - system displays the Context element as selected while opening Functional/Failure Analysis
- 12:37 PM Bug #14320 (In Progress): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 12:36 PM Bug #14266 (Fixed with Hotfix): Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- 12:35 PM Bug #14457 (Resolved): Multi site->Audit program: Remove this alert message for clause in multi site
- Need to discuss with Bijoy
- 12:34 PM Bug #14284 (In Progress): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- 11:34 AM Bug #14421 (Resolved): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 11:33 AM Bug #14484 (Resolved): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 11:31 AM Bug #14484 (In Progress): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 11:30 AM Bug #14466 (Resolved): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Check after the build
- 11:08 AM Bug #14495 (Resolved): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- 10:51 AM Bug #14495 (In Progress): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- 11:08 AM Bug #14479 (Resolved): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- 10:51 AM Bug #14479 (In Progress): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- 11:08 AM Bug #14417 (Resolved): Label must be renamed as SEooC instead of SEOOC
- 10:51 AM Bug #14417 (In Progress): Label must be renamed as SEooC instead of SEOOC
- 11:06 AM Bug #14384 (Resolved): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 10:22 AM Bug #14210 (Closed): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 09:56 AM Bug #14498 (Open): Not able to create a Supplier PPAP program for a supplier with one part to different location
- 09:56 AM Bug #14483 (Open): Not able to attach draft document using special characters in file and document name
10/20/2019
- 05:56 PM Bug #14323 (Resolved): When trying to delete the document from the ECN form then in the prompt it shows "error" before the alert message.
- 05:56 PM Bug #14392 (Resolved): When the ECR form is submitted for approval then the requestor and approver can able to delete the documents which are already requested. It should not allow to delete the document request
- 05:28 PM Bug #14409 (Resolved): Even after rejection also the ECR form window is not closing and the change document request action is not removed for the user also
- 11:37 AM Bug #14433 (Resolved): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- 11:37 AM Bug #14428 (Resolved): LPA :Holiday alert is not displayed when selected the day which is holiday
10/19/2019
- 11:42 PM Bug #14388 (Resolved): Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- 10:44 PM Bug #14404 (Resolved): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 10:00 PM Bug #14276 (Resolved): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 10:00 PM Bug #14274 (Resolved): Groups: When creating a new group, By default view documents rights should be checked
- 10:00 PM Bug #14253 (Resolved): Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- 10:00 PM Bug #14281 (Resolved): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- 09:58 PM Bug #14376 (Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 09:58 PM Bug #14371 (Resolved): Entity->Assign process window does not displays Labels with same size on X and Y axis
- 09:57 PM Bug #14469 (Resolved): Shift status is changing without save
- 09:54 PM Bug #14468 (Resolved): Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- 04:48 PM Bug #14461 (Resolved): Assign Checklist-> Max and min button need to displayed in assign checklist page
- Faced UI issue in it need to check
- 03:16 PM Bug #14446 (Resolved): LPA : Mandatory auditee response is not working as expected for OFI
- 12:37 PM Bug #14343 (Resolved): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
10/18/2019
- 07:25 PM Bug #14479 (Open): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- 03:03 PM Bug #14479 (Closed): Multi Browser and Multi Language - Design/Process VDA - Structure Analysis - Label for Zoom option is not proper in Chinese Language (Refer Description)
- Issue occurs except in IE Browser.
- 07:24 PM Bug #14484 (Open): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 03:58 PM Bug #14484 (Closed): Multi Language(Spanish) - Functional/Failure Analysis - Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- Focus element/Context element and Active Document labels are not displayed only For Front Impact 正面冲击 pi
- 07:20 PM Bug #14494 (Open): Process VDA: Process Flow Tool Tip is displaying wrongly
- 04:56 PM Bug #14494 (Closed): Process VDA: Process Flow Tool Tip is displaying wrongly
- In Process VDA, the Process Flow Tool Tip is displaying as Structure Analysis but actually it should be display as Pr...
- 07:20 PM Bug #14495 (Open): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- 05:18 PM Bug #14495 (Closed): (Multi Browser)Except IE, Design VDA - Functional/Failure Analysis - System does not display Text field in Table view to add Function/Requirement/Failure
- System does not display Text field in Table view to add Function/Requirement/Failure
- 07:10 PM Bug #14473 (In Progress): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 02:09 PM Bug #14473 (Open): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- 12:52 PM Bug #14473 (Closed): Design VDA - Structure Analysis - System allows to add Parent element under its child element.
- Need to restrict parent under Child elements
- 06:37 PM Bug #14398 (In Progress): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- 06:20 PM Bug #14500 (Closed): (Multi Browser - Chrome) Process VDA - Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- Created Operation Category and Operation are listed in 4M Category and 4M Dropdown
- 05:55 PM Bug #14498 (Closed): Not able to create a Supplier PPAP program for a supplier with one part to different location
- Not able to create a Supplier PPAP program for a supplier with one part to different location(one part-One plant-2 di...
- 05:51 PM Bug #14470 (Resolved): Not able to replicate:Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its showing attach rights and the inherit is checked , but dont know how the rights has been set
- 02:08 PM Bug #14470 (Open): Not able to replicate:Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its showing attach rights and the inherit is checked , but dont know how the rights has been set
- 11:38 AM Bug #14470 (Closed): Not able to replicate:Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its showing attach rights and the inherit is checked , but dont know how the rights has been set
- Assign author:Shows the user even the user doesn't have attach rights for the folder. For a particular user, its show...
- 05:51 PM Bug #14425 (Resolved): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- Fixed and patches ready for testing
- 05:51 PM Bug #14431 (Resolved): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- Fixed and patches ready for testing
- 05:36 PM Bug #14316 (In Progress): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 05:36 PM Bug #14408 (In Progress): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 05:35 PM Bug #14421 (In Progress): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 05:33 PM Bug #14427: Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- Kindly help us on this
- 05:33 PM Bug #14435: Both IE & Chrome: All the PI Names displaying as "Edit Element"
- Not an issue working as expected
- 05:28 PM Bug #14482 (Resolved): Change Management- When the Requester and responsible person is same then the document change email notification is not generating
- 05:28 PM Bug #14482 (Open): Change Management- When the Requester and responsible person is same then the document change email notification is not generating
- 03:22 PM Bug #14482 (Closed): Change Management- When the Requester and responsible person is same then the document change email notification is not generating
- When the Requester and responsible person is same then the document change email notification is not generating
- 05:25 PM Bug #14481: Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- WAD
- 05:22 PM Bug #14481 (Open): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 03:21 PM Bug #14481 (Closed): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- Notify administrator to assign a route for pending request and
Notify administrator to assign document attachment f... - 05:25 PM Bug #14443 (Resolved): Multilanguage:Customize email message:User should customize language specific emails. The content customize in English should not be reflected for all languages
- 05:24 PM Bug #14476 (Resolved): Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supplier users irrespective of doc pro settings level selection
- 02:07 PM Bug #14476 (Open): Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supplier users irrespective of doc pro settings level selection
- 01:09 PM Bug #14476 (Closed): Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supplier users irrespective of doc pro settings level selection
- Supplier users should not be displayed anywhere across Doc Pro. Due to this all levels and docs are displayed to supp...
- 05:23 PM Bug #14203 (Resolved): When entering document name with special character then it shows different alert. Show common alert when the special characters are not accepted.Same for file name which has spl char(Attached the doc for ref))
- for attaching document name contains special characters is working as expected.
- 04:58 PM Bug #14475 (Resolved): Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
- 02:08 PM Bug #14475 (Open): Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
- 01:00 PM Bug #14475 (Closed): Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
- Groups-->Supplier users(Supplier contact person) showing in the Groups user pop up window.
The Created Supplier ... - 04:55 PM Bug #14477: VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- update the steps you did to replicate the scenario. From your step to reproduce i cannot able to replicate
- 02:09 PM Bug #14477 (Open): VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- 01:55 PM Bug #14477 (Closed): VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting displayed
- VAM-Corrective action close out->View edit checklists->On clicking View/edit checklists "No data found" is getting di...
- 04:54 PM Bug #14277 (In Progress): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 04:48 PM Bug #14493 (Closed): Multi Browser(Chrome & Firefox) - Design VDA - system displays the Context element as selected while opening Functional/Failure Analysis
- system displays the Context element as selected while opening Functional/Failure Analysis
- 04:48 PM Bug #14384 (In Progress): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 04:45 PM Bug #14426 (Resolved): LPA: Time Period as "month" should not allow to select Past months from the Calendar month selection
- Not an issue. Please close this issue. You are selecting in 2019. LPA didn't allow for past days from current day.
- 04:42 PM Bug #14414 (Resolved): Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- Production line is combination of assembly and manufacturing line. Not an issue
- 04:39 PM Bug #14447 (In Progress): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- 04:32 PM Bug #14440 (Resolved): Template1->We are not able to enter the Score value in Template 1
- Duplicate Issue :Bug #14401
- 04:31 PM Bug #14401 (Resolved): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- Verify after this build
- 04:23 PM Bug #14324 (In Progress): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 03:51 PM Bug #14442 (Resolved): LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- Verify after build
- 10:05 AM Bug #14442: LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- 1)Login to module as auditor
2)Click on perform audit
3)Click on Upload audit record
4)Click on assign checklist
... - 03:30 PM Bug #14483 (Closed): Not able to attach draft document using special characters in file and document name
- Not able to attach draft document using special characters in file and document name- page keeps on loading
- 03:21 PM Bug #14480 (Closed): Dont display Supplier in any of the user selection part.
- Dont display Supplier in any of the user selection part.
- 02:55 PM Bug #14452: When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- Document name is a link and the system will take it as an html. this cannot be fixed or an escape character cannot be...
- 02:09 PM Bug #14468 (Open): Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- 10:17 AM Bug #14468 (Closed): Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- Shift Page when clicked on bread crumb page is not staying on same entity where the user is in to
- 02:08 PM Bug #14469 (Open): Shift status is changing without save
- 10:28 AM Bug #14469 (Closed): Shift status is changing without save
- Shift status is changing without save meaning status is displaying as Red color
- 02:08 PM Bug #14474 (Open): Master tag folder allows to save and Delete blank space field
- 12:53 PM Bug #14474 (Closed): Master tag folder allows to save and Delete blank space field
- Master tag folder allows to save and Delete blank space field
- 02:08 PM Bug #14471 (Open): Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- 11:57 AM Bug #14471 (Closed): Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- 01:02 PM Bug #14428 (In Progress): LPA :Holiday alert is not displayed when selected the day which is holiday
- 11:56 AM Bug #14366 (Resolved): When the document name contains special character then selecting the document for the change request - No Response
- 11:56 AM Bug #14362 (Resolved): Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request status as "Incomplete"
- 11:56 AM Bug #14352 (Resolved): CM: Before the ECR form gets approve the Change request actions are listed for the Responsibility person.
- 11:56 AM Bug #14329 (Resolved): Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
- 11:56 AM Bug #14294 (Resolved): While approving the respective action in approver login displays dual window after approver
- 11:56 AM Bug #13905 (Resolved): When Project is not selected and from project listing and initiating change request from APQP (With approval) is not working.
- 11:26 AM Bug #14345 (Resolved): Supplier -> Spell mistake in various pages / Content change in alert message
- 11:16 AM Bug #14433 (In Progress): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- 10:27 AM Bug #14423 (Resolved): LPA : Drop down button need to be displayed on RHS for the Checkpoints
- 10:24 AM Bug #14423 (In Progress): LPA : Drop down button need to be displayed on RHS for the Checkpoints
10/17/2019
- 09:27 PM Bug #14457 (In Progress): Multi site->Audit program: Remove this alert message for clause in multi site
- 07:52 PM Bug #14457 (Open): Multi site->Audit program: Remove this alert message for clause in multi site
- 05:42 PM Bug #14457 (Closed): Multi site->Audit program: Remove this alert message for clause in multi site
- Multi site->Audit program: Remove this alert message for clause in multi site
- 08:12 PM Bug #14278 (Resolved): LPA : while creating equipment under manufacturing line displays error
- Not able to replicate
- 08:00 PM Bug #14282 (Closed): LPA : Changed responsible person person is not displaying in audit report for findings
- Duplicate issue. Closed
- 08:00 PM Bug #14420 (Closed): Checkpoint names are getting duplicated in filling checklist screen
- 07:59 PM Bug #14420: Checkpoint names are getting duplicated in filling checklist screen
- Description data is getting displayed. issue closed
- 07:58 PM Bug #14429 (Closed): LPA : Date is not getting changed when Start date and End date is changed for particular scheduled cell and saved
- Duplicate issue . Closed
- 03:09 PM Bug #14429 (Resolved): LPA : Date is not getting changed when Start date and End date is changed for particular scheduled cell and saved
- Duplicate Issue #14433 : While Saving from cell Not working
- 02:13 PM Bug #14429 (Open): LPA : Date is not getting changed when Start date and End date is changed for particular scheduled cell and saved
- 12:39 PM Bug #14429 (Closed): LPA : Date is not getting changed when Start date and End date is changed for particular scheduled cell and saved
- 07:57 PM Bug #14445 (Closed): LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- Double confirmation. Issue closed
- 07:57 PM Bug #14445 (Fixed with Hotfix): LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- 03:46 PM Bug #14445 (Open): LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- 03:11 PM Bug #14445: LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- Waring alert. It does not says confirm or not confirm. It says there is a possibility.
- 02:39 PM Bug #14445 (Closed): LPA : Removing checklist is displaying unwanted alert in Fill checklist screen
- Removing checklist is displaying unwanted alert in Fill checklist screen
- 07:52 PM Bug #14467 (Open): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- 07:31 PM Bug #14467 (Closed): Perform Audit-> Template 1->Clauses number need to displayed in Template 1
- Perform Audit-> Template 1->Clauses number need to displayed in Template 1 reports
- 07:52 PM Bug #14466 (Open): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- 07:24 PM Bug #14466 (Closed): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO"...
- 07:52 PM Bug #14464 (Open): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- 06:59 PM Bug #14464 (Closed): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- 07:52 PM Bug #14463 (Open): Remainder/Escalation mail -> effectiveness -> Count display is incorrect. I have verified and validation only one finding but it show 3 finding in content
- 06:39 PM Bug #14463 (Closed): Remainder/Escalation mail -> effectiveness -> Count display is incorrect. I have verified and validation only one finding but it show 3 finding in content
- Remainder/Escalation mail -> effectiveness -> Mail content count display is incorrect. I have verified and validation...
- 07:52 PM Bug #14461 (Open): Assign Checklist-> Max and min button need to displayed in assign checklist page
- 06:05 PM Bug #14461 (Closed): Assign Checklist-> Max and min button need to displayed in assign checklist page
- Assign Checklist-> Max and min button need to displayed in assign checklist page
- 07:52 PM Bug #14459 (Open): LPA : Submit button is available even after finding is closeout bu auditor
- 05:54 PM Bug #14459 (Closed): LPA : Submit button is available even after finding is closeout bu auditor
- Submit button is available even after finding is closeout by auditor
Displays submit button when Only Verification... - 07:52 PM Bug #14458 (Open): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- 05:43 PM Bug #14458 (Closed): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- Search Inspection Entry: Inprocess Inspection sheet is not displaying
Shows No data found - 05:52 PM Bug #14411 (Resolved): Page is not responding when clicked on save in Audit assign screen
- 05:11 PM Bug #14456 (Open): Reports: In the PI field its displaying the PI name as 2 times
- 05:09 PM Bug #14456 (Closed): Reports: In the PI field its displaying the PI name as 2 times
- In the PI field its displaying the PI name as 2 times
- 05:11 PM Bug #14455 (Open): When tried to enter Department name manually in 5why form of 7D approach displays error
- 05:08 PM Bug #14455 (Closed): When tried to enter Department name manually in 5why form of 7D approach displays error
- When tried to enter Department name manually in 5why form of 7D approach displays error
- 05:11 PM Bug #14454 (Open): Reports: Reports is not displaying as User Specific
- 05:06 PM Bug #14454: Reports: Reports is not displaying as User Specific
- This Issue is missed by QA
- 05:01 PM Bug #14454 (Closed): Reports: Reports is not displaying as User Specific
- If the User A Published a PI and in the Reports User A only can be viewed other users it should not show but now that...
- 05:11 PM Bug #14453 (Open): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- 04:58 PM Bug #14453 (Closed): Audit schedule-> Unwanted image is displayed below the page after schedule created.
- Audit schedule-> Unwanted image is displayed below the page after schedule created.
- 04:43 PM Bug #14356 (Resolved): Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- verify after next build
- 04:43 PM Bug #14403 (Resolved): AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- Verify after Next build
- 04:40 PM Bug #14402 (Resolved): Multi Site: Duplicate equipment are displaying in LPA schedule screen
- Verify after next build
- 04:12 PM Bug #14448 (Resolved): Checklist page-> Minus value are displayed in Score value text box box
- It will Show as Not applicable while retrieving checklist when you enter character
- 03:46 PM Bug #14448 (Open): Checklist page-> Minus value are displayed in Score value text box box
- 02:57 PM Bug #14448 (Closed): Checklist page-> Minus value are displayed in Score value text box box
- input value as A,b...
- 04:07 PM Bug #14326 (Resolved): Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- verify After This build
- 04:05 PM Bug #14359 (Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- Check After This build
- 04:05 PM Bug #14361 (Resolved): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- Check After This build
- 10:36 AM Bug #14361 (In Progress): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- 10:32 AM Bug #14361 (Not Resolved): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- @ Boopathi: You have attached corrective action satisfactory email. But issue on
Email Link from Findings Effective... - 04:05 PM Bug #14245 (Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Check After This build
- 04:05 PM Bug #14407 (Resolved): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Check After this build
- 04:01 PM Bug #14407 (In Progress): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- 04:04 PM Bug #14422 (Resolved): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- Check After this build
- 03:46 PM Bug #14452 (Open): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 03:43 PM Bug #14452 (Closed): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- When the document name and number has special characters like "<Test document>" then its not displaying the document...
- 03:46 PM Bug #14449 (Open): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- 03:05 PM Bug #14449 (Closed): Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to default color
- Block diagram: While selecting Dark theme from modern the color of the interface line automatically changed back to d...
- 03:46 PM Bug #14447 (Open): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- 02:57 PM Bug #14447 (Closed): Cosmetic Issue: Design VDA, In Function/Failure Analysis having Cosmetic Issues in the Add Function, Add Requirement, Add Failure options
- Design VDA, Function/Failure Analysis for the Opened Window Header of Add Function, Add Requirement, Add Failure is d...
- 03:46 PM Bug #14446 (Open): LPA : Mandatory auditee response is not working as expected for OFI
- 02:51 PM Bug #14446 (Closed): LPA : Mandatory auditee response is not working as expected for OFI
- Mandatory auditee response is not working as expected while filling for OFI while uploading ofi mandatory is auditee ...
- 03:46 PM Bug #14443 (Open): Multilanguage:Customize email message:User should customize language specific emails. The content customize in English should not be reflected for all languages
- 02:31 PM Bug #14443 (Closed): Multilanguage:Customize email message:User should customize language specific emails. The content customize in English should not be reflected for all languages
- Multi language: Customize email message:Count customize language specific emails. The content customize in English s...
- 03:45 PM Bug #14442 (Open): LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- 03:17 PM Bug #14442: LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- attached screen shot is not validated you issue
- 02:29 PM Bug #14442 (Closed): LPA : Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available.
- Upload audit record does not display checkpoints when clicked on Checklist name thought checklists are available afte...
- 03:04 PM Bug #14436: Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- Function Not implemented
- 02:14 PM Bug #14436 (Open): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 12:57 PM Bug #14436 (Closed): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
1)log... - 02:49 PM Bug #14444 (Resolved): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- 02:49 PM Bug #14444 (Open): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- Cannot able to replicate
- 02:35 PM Bug #14444 (Closed): Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- Audit program-> Audit Conducted By->Remove the map segment for Supplier & Supplier self evaluation
- 02:14 PM Bug #14434 (Open): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 12:53 PM Bug #14434 (Closed): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- * In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department an...
- 02:14 PM Bug #14427 (Open): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- 12:09 PM Bug #14427 (Closed): Chrome Browser: Opened DocPro Hyperlink is displaying as Blank
- In the Chrome Browser, When the User tries to Open DocPro & DocPro Image Hyperlinks its displaying as Empty in the Op...
- 02:14 PM Bug #14431 (Open): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- 12:40 PM Bug #14431 (Closed): Both IE & Chrome: In Main2, Double-Vertical Scroll Bar is displaying for the Opened Documents
- In Main2, When the User Opens the Production Item Operation Flow Document and the User Open the PFMEA/Process Flow/Ot...
- 02:14 PM Bug #14435 (Open): Both IE & Chrome: All the PI Names displaying as "Edit Element"
- 12:57 PM Bug #14435 (Closed): Both IE & Chrome: All the PI Names displaying as "Edit Element"
- All the PI Names displaying as "Edit Element" and its very difficult to identify the PI. This issue is occurs due to ...
- 02:14 PM Bug #14432 (Open): Findings Report ->Benchmark data is not displayed in Findings Reports.
- 12:43 PM Bug #14432 (Closed): Findings Report ->Benchmark data is not displayed in Findings Reports.
- Findings Report ->Remarks / Objective Evidence data is not displayed in Reports.
- 02:14 PM Bug #14440 (Open): Template1->We are not able to enter the Score value in Template 1
- 01:45 PM Bug #14440 (Closed): Template1->We are not able to enter the Score value in Template 1
- Template1->We are not able to enter the Score value in Template 1
- 02:13 PM Bug #14426 (Open): LPA: Time Period as "month" should not allow to select Past months from the Calendar month selection
- 11:53 AM Bug #14426 (Closed): LPA: Time Period as "month" should not allow to select Past months from the Calendar month selection
- Time Period as "month" should not allow to select Past months from the Calendar month selection because LPA Will not ...
- 02:13 PM Bug #14428 (Open): LPA :Holiday alert is not displayed when selected the day which is holiday
- 12:36 PM Bug #14428 (Closed): LPA :Holiday alert is not displayed when selected the day which is holiday
- Holiday alert is not displayed when selected the day which is holiday and even date is not selecting either
- 02:12 PM Bug #14433 (Open): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- 12:43 PM Bug #14433 (Closed): LPA : When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- When tried to confirm LPA schedule individually from the Scheduled cell schedule is not getting confirmed after save
- 02:11 PM Bug #14437 (Open): Inprocess Inspection sheet is not opening from supervisor approval menu
- 01:01 PM Bug #14437 (Closed): Inprocess Inspection sheet is not opening from supervisor approval menu
- Inprocess Inspection sheet is not opening from supervisor approval menu,Shows No data found
- 02:07 PM Bug #14439 (Open): Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision as A in email
- 01:24 PM Bug #14439 (Closed): Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision as A in email
- Custom revision in email is not displayed fully in all emails. If the revision is A.I then its showing the revision a...
- 11:54 AM Bug #14425 (Open): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- 11:52 AM Bug #14425 (Closed): Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- Bulk Publish -> A blank alert is displayed when a bulk publish is done without entering Reason for Publish
- 11:33 AM Bug #14423 (Open): LPA : Drop down button need to be displayed on RHS for the Checkpoints
- 10:56 AM Bug #14423 (Closed): LPA : Drop down button need to be displayed on RHS for the Checkpoints
- Drop down button need to be displayed on RHS for the Checkpoints
10/16/2019
- 09:41 PM Bug #14360 (Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 09:24 PM Bug #14396 (Resolved): Multi Site : Layer creation is not displaying all the modes available displays only Shift mode
- 05:08 PM Bug #14396 (Open): Multi Site : Layer creation is not displaying all the modes available displays only Shift mode
- 03:10 PM Bug #14396 (Closed): Multi Site : Layer creation is not displaying all the modes available displays only Shift mode
- Layer creation is not displaying all the modes available displays only Shift mode
- 09:14 PM Bug #14359 (In Progress): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 08:08 PM Bug #14252 (Resolved): Process Activities ->Unassigned site name is displayed for a process
- Not Replicated
- 07:46 PM Bug #14420 (Resolved): Checkpoint names are getting duplicated in filling checklist screen
- How many times will replay on same requirement.
- 06:40 PM Bug #14420 (Open): Checkpoint names are getting duplicated in filling checklist screen
- 06:10 PM Bug #14420 (Closed): Checkpoint names are getting duplicated in filling checklist screen
- Checkpoint names are getting duplicated in filling checklist screen
- 07:42 PM Bug #14422 (In Progress): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- Not a Show Stopper Issue
- 06:40 PM Bug #14422 (Open): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- 06:22 PM Bug #14422 (Closed): Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- Supplier Management->Unable to do VEM as after setting up audit program "Map segment tab is automatically hidden
- 06:41 PM Bug #14417 (Open): Label must be renamed as SEooC instead of SEOOC
- 05:49 PM Bug #14417 (Closed): Label must be renamed as SEooC instead of SEOOC
- Label must be renamed as SEooC instead of SEOOC
- 06:41 PM Bug #14421 (Open): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 06:19 PM Bug #14421 (Closed): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- In Aqua Pro,RFD and FST including Global PI is displayed as Edited PI.
- 06:40 PM Bug #14415 (Open): In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- 05:43 PM Bug #14415 (Closed): In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- * In staff movement form, While selecting the user throw exception error in Staff movement, ODC staff movement also.
- 06:40 PM Feature/Enhancement #14413 (Open): Supplier portal module should be display in social media
- 05:30 PM Feature/Enhancement #14413 (Open): Supplier portal module should be display in social media
- Supplier portal module should be display in social media
- 06:40 PM Bug #14414 (Open): Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- 05:43 PM Bug #14414 (Closed): Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- Need option to select manufacturing line in the equipment selection drop down in LPA schedule screen
- 06:40 PM Bug #14412 (Open): After working on the programs in the nested view the gantt page getting blank
- 05:25 PM Bug #14412 (Closed): After working on the programs in the nested view the gantt page getting blank
- After working on the programs in the nested view the Gantt page getting blank . Working fine in the tree view
- 06:40 PM Bug #14416 (Open): The task rating color is not compatable with the text color of %completion option
- 05:45 PM Bug #14416 (Closed): The task rating color is not compatable with the text color of %completion option
- IN the Gantt page while updating task rating to dark colors the %completion is not viewable.
- 06:39 PM Bug #14418 (Open): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- 05:57 PM Bug #14418 (Not Resolved): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- The existing parts added to a program via BOM import got listed again in the aqua tree separately under the part fami...
- 05:53 PM Bug #14245 (In Progress): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:52 PM Bug #14279 (Resolved): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- Verify after Build
- 05:52 PM Bug #14286 (Resolved): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- Verify after Build
- 05:52 PM Bug #14307 (Resolved): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- Verify after Build
- 05:52 PM Bug #14313 (Resolved): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- Verify after Build
- 05:52 PM Bug #14311 (Resolved): Effectiveness for findings: Audit programs effective due days are not saving
- Verify after patch release
- 05:51 PM Bug #14258 (Resolved): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- Verify after patch release
- 05:51 PM Bug #14271 (Resolved): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- Verify after patch release
- 05:51 PM Bug #14355 (Resolved): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- Verify after Build
- 05:51 PM Bug #14325 (Resolved): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- Verify after patch release
- 05:51 PM Bug #14327 (Resolved): Email for Effectiveness For Findings->Some fields are missing in emails content
- Verify after patch release
- 04:41 PM Bug #14327 (In Progress): Email for Effectiveness For Findings->Some fields are missing in emails content
- 05:50 PM Bug #14353 (Resolved): Email for Effectiveness For Findings -> Email subject is wrong.
- Verify after patch release
- 05:50 PM Bug #14354 (Resolved): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- Verify after patch release
- 05:29 PM Bug #14319 (Resolved): In Program - Deliverable name is not displayed in the risk register.
- 05:23 PM Bug #14411 (Open): Page is not responding when clicked on save in Audit assign screen
- 05:19 PM Bug #14411 (Closed): Page is not responding when clicked on save in Audit assign screen
- Page is not responding when clicked on save in Audit assign screen and also when deleted page is getting hanged
- 05:23 PM Bug #14384 (Open): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 12:42 PM Bug #14384 (Closed): EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- EFC Tree: while mouse-hover on publish icon Tool tip option is not working
- 05:23 PM Bug #14390 (Open): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 02:02 PM Bug #14390 (Closed): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- Tree diagram: where ever we do right click on tree diagram system opens context menu
Issue occurs in VDA/FST - 05:22 PM Bug #14410 (Open): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 05:04 PM Bug #14410 (Closed): VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- VOC: FlowUp is not working when it is done in VOC and also it is not reflected in DFMEA page
- 05:22 PM Bug #14408 (Open): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- 05:01 PM Bug #14408 (Closed): Design VDA - Structure Analysis - After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the element on the Dropped element
- After moving an Element and While Drag and Drop any element and clicking Cancel icon, system automatically Copies the...
- 05:22 PM Bug #14387 (Open): Suite: First name,middle name,last name separation is not valid
- 01:00 PM Bug #14387 (Closed): Suite: First name,middle name,last name separation is not valid
- Suite: First name,middle name,last name separation is not valid
- 05:22 PM Bug #14368 (Open): For the concerns created from IC, without making any changes in concern form asks " New Concern form for category and sub category has been changed. Do you want new form changes?"
- 10:20 AM Bug #14368 (Closed): For the concerns created from IC, without making any changes in concern form asks " New Concern form for category and sub category has been changed. Do you want new form changes?"
- For the concerns created from IC, without making any changes in concern form asks " New Concern form for category an...
- 05:22 PM Bug #14381 (Open): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- 12:18 PM Bug #14381 (Closed): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not g...
- 05:21 PM Bug #14400 (Open): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 03:32 PM Bug #14400 (Closed): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- The close button in track project is getting hidden sometime and user cant able to close it using close icon. This ha...
- 05:21 PM Bug #14367 (Open): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 10:16 AM Bug #14367 (Closed): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in ...
- 05:20 PM Bug #14379 (Open): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
- 12:04 PM Bug #14379 (Closed): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
- 05:20 PM Bug #14382 (Open): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- 12:22 PM Bug #14382 (Closed): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the ...
- 05:20 PM Bug #14391 (Open): When creating a program using Master Template then the added supplier project is not listed in the Vendor view as well as for SQE , SQM and Supplier contact person.
- 02:04 PM Bug #14391 (Closed): When creating a program using Master Template then the added supplier project is not listed in the Vendor view as well as for SQE , SQM and Supplier contact person.
- When creating a program using Master Template then the added supplier project is not listed in the Vendor view as wel...
- 05:19 PM Bug #14392 (Open): When the ECR form is submitted for approval then the requestor and approver can able to delete the documents which are already requested. It should not allow to delete the document request
- 02:24 PM Bug #14392 (Closed): When the ECR form is submitted for approval then the requestor and approver can able to delete the documents which are already requested. It should not allow to delete the document request
- 05:19 PM Bug #14405 (Open): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 04:30 PM Bug #14405 (Closed): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- for the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 05:19 PM Bug #14409 (Open): Even after rejection also the ECR form window is not closing and the change document request action is not removed for the user also
- 05:02 PM Bug #14409 (Closed): Even after rejection also the ECR form window is not closing and the change document request action is not removed for the user also
- Even after rejection also the ECR form window is not closing and the change document request action is not removed fo...
- 05:18 PM Bug #14401 (Open): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- 03:33 PM Bug #14401 (Closed): "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- "Model.lstAuAuditReportDetails[0].strAuditeeNames.ToString()"Error is displayed in Template 1
- 05:18 PM Bug #14403 (Open): AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- 03:44 PM Bug #14403 (Closed): AuditProgram->Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- Remove the Old standard in Template1 & 2 in Report Template format (Audit Program)
- 05:17 PM Bug #14407 (Open): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- 04:55 PM Bug #14407 (Closed): Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
- Manufacturing audit report-> Heading should be right align and need to add dot(.)after the no
Impact:
need to f... - 05:17 PM Bug #14370 (Open): Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select the country,state and city !!" though country is selected
- 10:39 AM Bug #14370 (Closed): Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select the country,state and city !!" though country is selected
- Alert need to Renamed as "Please select the state and city !! " but currently system is displaying as "Please select ...
- 05:17 PM Bug #14371 (Open): Entity->Assign process window does not displays Labels with same size on X and Y axis
- 10:46 AM Bug #14371 (Closed): Entity->Assign process window does not displays Labels with same size on X and Y axis
- Entity->Assign process window does not displays Labels with same size on X and Y axis
- 05:16 PM Bug #14373 (Open): Entity->Assign process->While copying process from one entity to another entity while paste does not display hand icon
- 10:57 AM Bug #14373 (Closed): Entity->Assign process->While copying process from one entity to another entity while paste does not display hand icon
- Entity->Assign process->While copying process from one entity to another entity while paste does not display hand ico...
- 05:13 PM Bug #14198 (Closed): Process VDA - Structure Analysis - Server error is displayed while selecting Create Operation and FourM Categories.
- Closed in SP915 Cycle 2
- 05:09 PM Bug #14376 (Open): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 11:37 AM Bug #14376 (Closed): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 05:09 PM Bug #14383 (Open): Search is not working in Widget settings either by using search window or else through search grid
- 12:40 PM Bug #14383 (Closed): Search is not working in Widget settings either by using search window or else through search grid
- Search is not working in Widget settings either by using search window or else through search grid
- 05:09 PM Feature/Enhancement #14385 (Open): User log->when session is expired system is not considering the logout time
- 12:47 PM Feature/Enhancement #14385 (In Progress): User log->when session is expired system is not considering the logout time
- User log->when session is expired system is not considering the logout time
- 05:09 PM Bug #14388 (Open): Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- 01:03 PM Bug #14388 (Closed): Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- Widget preference->Add New widget after entering widget name and Url when clicked on save displays Error
- 05:08 PM Bug #14398 (Open): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- 03:27 PM Bug #14398 (Closed): Layer creation screen is not allowing to select the Route from the Assign route Drop down
- Layer creation screen is not allowing to select the Route from the Assign route Drop down though approval process is ...
- 05:04 PM Bug #14402 (Open): Multi Site: Duplicate equipment are displaying in LPA schedule screen
- 03:43 PM Bug #14402 (Closed): Multi Site: Duplicate equipment are displaying in LPA schedule screen
- Duplicate equipment are displaying in LPA schedule screen
Same is replicating to single site Corporate also - 05:04 PM Bug #13957 (Open): Under My deliverable list Navigate Menu is not showing for Supplier PPAP
- 05:03 PM Bug #14380 (Open): The document viewer publish is not working getting object reference not set error
- 12:13 PM Bug #14380 (Closed): The document viewer publish is not working getting object reference not set error
- The document viewer publish is not working getting object reference error. After clicking on OK published successfull...
- 05:02 PM Bug #14389 (Open): Linking supplier primary contact responsible for all tasks is not working
- 01:09 PM Bug #14389 (Closed): Linking supplier primary contact responsible for all tasks is not working
- Linking supplier primary contact responsible for all tasks is not working for the below scenario's.
1. Program BOM i... - 05:01 PM Bug #14397 (Open): Switching between programs not working for Supplier PPAP &AQPQ
- 03:11 PM Bug #14397 (Closed): Switching between programs not working for Supplier PPAP &AQPQ
- Switching between programs not working for Supplier PPAP (Enabled nested view for program)
- 04:59 PM Bug #14404 (Open): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 03:54 PM Bug #14404 (Closed): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
User ... - 02:49 PM Bug #14317 (In Progress): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 11:00 AM Bug #14361 (Resolved): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- not able to replicate
- 10:24 AM Bug #14329: Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
Comment from Varadaraj : get the session value while entering in to action management
and set the same session va...
10/15/2019
- 07:57 PM Bug #14301 (In Progress): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 07:57 PM Bug #14312 (In Progress): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 07:00 PM Bug #14355 (In Progress): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- 06:21 PM Bug #14355 (Open): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- 05:23 PM Bug #14355 (Closed): Supplier Management:Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- Audit topic (Class A or Class B) are unable to set for any checklists in checklist creation screen
- 06:59 PM Bug #14353 (In Progress): Email for Effectiveness For Findings -> Email subject is wrong.
- 06:26 PM Bug #14353 (Open): Email for Effectiveness For Findings -> Email subject is wrong.
- 05:18 PM Bug #14353 (Closed): Email for Effectiveness For Findings -> Email subject is wrong.
- Email for Effectiveness For Findings -> Email subject is wrong.
The email subject is displayed as "EwQIMS - Audit... - 06:56 PM Bug #14354 (In Progress): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- 06:25 PM Bug #14354 (Open): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- 05:21 PM Bug #14354 (Closed): Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminders and escalation email (Closed out)
- Customized Email Messages ->"Effectiveness For Findings" email context should be moved to "Closed Out" from "Reminder...
- 06:45 PM Bug #14290 (Resolved): LPA : Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan waiting for approval" alert message
- 06:36 PM Bug #14366 (Open): When the document name contains special character then selecting the document for the change request - No Response
- 06:34 PM Bug #14366 (Closed): When the document name contains special character then selecting the document for the change request - No Response
- 06:27 PM Bug #14351 (Open): Report : Final Inspection and Capture History reports are not opening
- 05:11 PM Bug #14351 (Closed): Report : Final Inspection and Capture History reports are not opening
- Report : Final Inspection and Capture History reports are not opening
- 06:27 PM Bug #14337 (Open): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- 02:43 PM Bug #14337 (Closed): Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activity person for the WO, it display "Error message"
- Issue 1: Social Media:Planned Maintenance widget pop up window--> When a user tries to assign the Maintenance Activit...
- 06:27 PM Bug #14348 (Open): Issue with Output document attachment in Document viewer after selecting "Is Output Document Required ?=No.
- 04:45 PM Bug #14348 (Closed): Issue with Output document attachment in Document viewer after selecting "Is Output Document Required ?=No.
- Clicking on the Output document attached from Document viewer after selecting "Is Output Document Required ?=No. is s...
- 06:27 PM Bug #14343 (Open): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- 03:56 PM Bug #14343: Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- Verified in SP915-CY2 on 15-10-2019
- 03:48 PM Bug #14343 (Closed): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- 06:27 PM Suggestion #14364 (Open): Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- 06:06 PM Suggestion #14364 (Closed): Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- 06:26 PM Bug #14365 (Open): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 06:11 PM Bug #14365 (Closed): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 06:26 PM Bug #14345 (Open): Supplier -> Spell mistake in various pages / Content change in alert message
- 04:14 PM Bug #14345 (Closed): Supplier -> Spell mistake in various pages / Content change in alert message
- Supplier -> Spell mistake in various pages
1. Address -> Assign address label and alert message "Please Select the... - 06:26 PM Bug #14350 (Open): NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clciking on "Submit to auditee" button
- 05:04 PM Bug #14350 (Closed): NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clciking on "Submit to auditee" button
- NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clicking on "Submit to auditee" butto...
- 06:25 PM Bug #14359 (Open): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 05:42 PM Bug #14359 (Closed): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- Closed Out -> Effectiveness Due Date field is not supporting multidate format like DD/MM/YYYY and YYYY/MM/DD
- 06:25 PM Bug #14360 (Open): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 05:46 PM Bug #14360 (Closed): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 06:25 PM Bug #14361 (Open): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- 05:53 PM Bug #14361 (Closed): Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected.
- Email Link from Findings Effectiveness Verification -> The findings # hyperlink (NC/OFI) is not working as expected. ...
- 06:24 PM Bug #14363 (Open): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 06:05 PM Bug #14363 (Closed): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business...
- 06:24 PM Bug #14333 (Open): Terminating the second revision document shows the document status as "Awaiting approval". (Local document and aqua document and URL Publish)
- 02:24 PM Bug #14333 (Closed): Terminating the second revision document shows the document status as "Awaiting approval". (Local document and aqua document and URL Publish)
- 06:23 PM Bug #14335 (Open): Need output document icon for the URL link attachments only for URL Link icon is missing
- 02:36 PM Bug #14335 (Closed): Need output document icon for the URL link attachments only for URL Link icon is missing
- Need output document icon for the URL link attachments only for URL Link icon is missing
- 06:23 PM Suggestion #14339 (Open): Invalid URL prompt message need to be changed. Instead of "URL Error" change it to "Please specify Valid URL"
- 02:45 PM Suggestion #14339 (Closed): Invalid URL prompt message need to be changed. Instead of "URL Error" change it to "Please specify Valid URL"
- Instead of "URL Error" change it to "Please specify Valid URL"
- 06:23 PM Bug #14341 (Open): Project and supplier icon is not listed in the System tree view for the program
- 03:23 PM Bug #14341 (Closed): Project and supplier icon is not listed in the System tree view for the program
- 06:23 PM Bug #14342 (Open): Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- 03:31 PM Bug #14342 (Closed): Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- Not able to view the aqua link in Chrome it shows blank screen from deliverable info - working in document viewer.
- 06:22 PM Bug #14346 (Open): Without selecting the project when change request is initiated then in the project listing screen - "Select project " prompt is displayed.
- 04:42 PM Bug #14346 (Closed): Without selecting the project when change request is initiated then in the project listing screen - "Select project " prompt is displayed.
- Without selecting the project when change request is initiated then in the project listing screen - "Select project "...
- 06:22 PM Bug #14352 (Open): CM: Before the ECR form gets approve the Change request actions are listed for the Responsibility person.
- 05:17 PM Bug #14352 (Closed): CM: Before the ECR form gets approve the Change request actions are listed for the Responsibility person.
- 06:22 PM Bug #14362 (Open): Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request status as "Incomplete"
- 05:55 PM Bug #14362 (Closed): Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request status as "Incomplete"
- Not able to verify the ECR form publish with approval - After publishing the ECR from it shows the change request sta...
- 06:21 PM Bug #14357 (Open): Cant able to create Nested concern for PSD approach.
- 05:26 PM Bug #14357 (Closed): Cant able to create Nested concern for PSD approach.
- Cant able to create Nested concern for PSD approach. This happens only because the Data entered in Counter measure fi...
- 06:20 PM Bug #14356 (Open): Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- 05:24 PM Bug #14356 (Closed): Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- Supplier Management: No NC/OFI category is listing in upload NC/OFI screen for multi site
- 06:20 PM Bug #14336 (Open): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- 02:40 PM Bug #14336 (Closed): Open as PNG - Alignment for the data after clicking the Export to PNG is not good.
- Alignment for the data after clicking the Export to PNG is not good. Issue occurs in Process Structure analysis also.
- 05:56 PM Bug #14245 (Not Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:56 PM Bug #14245: Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- As discussed with Bijoy the subject and description has changed.
- 01:26 PM Bug #14245 (Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Rejecting this issue based on subject (AS per comments from Mazhar)
- 12:48 PM Bug #14245 (Not Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- As discussed with bijoy system should allow to select only one process not multiple are allowed
- 12:08 PM Bug #14245 (Resolved): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Please Discuss with Bijoy. it will effect Design
- 04:58 PM Bug #13905: When Project is not selected and from project listing and initiating change request from APQP (With approval) is not working.
- Moving from SP906 - SP915
- 04:55 PM Bug #14096: Click to view report is not displaying audit status and audit date
- view report does not display the current status of audit report after publish
- 03:29 PM Bug #14273 (Closed): LPA : Findings attachment against the checkpoints when tried to view after attached it displays a popup "Linked document with this revision is not available"
- 01:07 PM Bug #14273 (Resolved): LPA : Findings attachment against the checkpoints when tried to view after attached it displays a popup "Linked document with this revision is not available"
- Not able to replicate
- 03:29 PM Bug #14239 (Closed): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- 02:59 PM Bug #14239 (Resolved): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- Kindly come and replicate before change the status. Refer Screenshots
- 12:41 PM Bug #14239 (Not Resolved): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- Status and Score value is only populating but color code is not getting populated to child checkpoints if score is se...
- 03:23 PM Bug #14340 (Closed): Audit which is ready to perform is not listing in perform audit page of auditor
- 03:05 PM Bug #14340 (Resolved): Audit which is ready to perform is not listing in perform audit page of auditor
- 03:05 PM Bug #14340 (Open): Audit which is ready to perform is not listing in perform audit page of auditor
- Cannot able to replicate
- 02:55 PM Bug #14340 (Closed): Audit which is ready to perform is not listing in perform audit page of auditor
- Audit which is ready to perform is not listing in perform audit page of auditor
- 03:20 PM Bug #14266: Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- This is not an issue. It is working fine after IIS restart.
- 02:41 PM Bug #14262 (Closed): Effectiveness for findings: Effectiveness status are not properly display in tool tip
- Verified in cycle2
- 02:40 PM Bug #14261 (Closed): Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- Issue verified in Cycle2
- 02:38 PM Bug #14256 (Closed): Email context for Effectiveness For Findings are not displayed in Multi site
- Verified
- 02:26 PM Bug #14244 (Closed): Shift Should drown down not textbox for planned and Actual Audit
- verified in cycle2
- 02:26 PM Bug #14244: Shift Should drown down not textbox for planned and Actual Audit
- Verified
- 01:39 PM Bug #14244 (Resolved): Shift Should drown down not textbox for planned and Actual Audit
- not an issue. if you select shift and it will reflect as DropDown in the Sceduling page.
it will fetch TPM shift i... - 12:36 PM Bug #14244 (Not Resolved): Shift Should drown down not textbox for planned and Actual Audit
- 01:48 PM Bug #14331 (Resolved): checkpoint logic is not displaying in Fill checklist screen though it is defined
- 01:41 PM Bug #14331 (Open): checkpoint logic is not displaying in Fill checklist screen though it is defined
- 01:39 PM Bug #14331: checkpoint logic is not displaying in Fill checklist screen though it is defined
- For List we will not show logic. Raja it is already discussed.
- 01:25 PM Bug #14331 (Closed): checkpoint logic is not displaying in Fill checklist screen though it is defined
- checkpoint logic is not displaying in Fill checklist screen though it is defined
- 01:46 PM Bug #14325 (In Progress): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- 01:41 PM Bug #14325 (Open): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- 12:37 PM Bug #14325 (Closed): Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments"
- Corrective Action close out-> Alert message should be display as "Please specify effectiveness comments".
- 01:42 PM Bug #14318 (Open): While opening the inspection sheet from Supervisor approval menu,Hourly reminder email is getting triggered
- 11:50 AM Bug #14318 (Closed): While opening the inspection sheet from Supervisor approval menu,Hourly reminder email is getting triggered
- While opening the inspection sheet from Supervisor approval menu Hourly reminder email is getting triggered
- 01:42 PM Bug #14329 (Open): Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
- 01:16 PM Bug #14329 (Closed): Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects(Supplier Portal module)
- Redirecting from Actions page , Project listing screen showing APQP projects instead of supplier projects
- 01:41 PM Bug #14327 (Open): Email for Effectiveness For Findings->Some fields are missing in emails content
- 12:45 PM Bug #14327 (Closed): Email for Effectiveness For Findings->Some fields are missing in emails content
- 1) Best Regards name is missing
2) Effectiveness due date is missing
3) Font type is different
4) Verification a... - 01:41 PM Bug #14319 (Open): In Program - Deliverable name is not displayed in the risk register.
- 11:59 AM Bug #14319 (Closed): In Program - Deliverable name is not displayed in the risk register.
- In Program - Deliverable name is not displayed in the risk register.
- 01:40 PM Bug #14323 (Open): When trying to delete the document from the ECN form then in the prompt it shows "error" before the alert message.
- 12:16 PM Bug #14323 (Closed): When trying to delete the document from the ECN form then in the prompt it shows "error" before the alert message.
- 01:40 PM Bug #14316 (Open): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- 10:49 AM Bug #14316 (Closed): Design VDA - Structure Analysis - There is no option to expand external elements after collapsing it.
- There is no option to expand external elements after collapsing it.
- 01:40 PM Bug #14320 (Open): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 11:59 AM Bug #14320 (Closed): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- • While scrolling the page, context menu is not scrolling along with the element.
• Also when the element is at th... - 01:40 PM Bug #14321 (Open): Header for Focus Element is displayed as Topic Element
- 12:06 PM Bug #14321 (Closed): Header for Focus Element is displayed as Topic Element
- Header for Topic Element must be changed as Focus Element
- 01:39 PM Bug #14324 (Open): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- 12:34 PM Bug #14324 (Closed): Percentage Allocation - After clicking on Step Label and updating any Percentage, JS error is displayed
- After clicking on Step Label and updating any Percentage, JS error is displayed
- 01:39 PM Bug #14328 (Open): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- 12:59 PM Bug #14328 (Closed): Process Flow - Assigned Operation ID and Process Flow Symbol is not displayed in Process Flow Diagram column after deleting the Operation from Structure Analysis(Refer Description and Steps)
- After deleting an Operation category in Structure analysis and adding new Operation Category, Assigned Operation ID a...
- 01:00 PM Bug #14247 (Closed): Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- when clicked on checklist displays checkpoints
- 12:52 PM Bug #14249 (Closed): "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- 12:52 PM Bug #14246 (Closed): LPA: User should be displayed based on the Auditor access in Layer page
- Currently system displays users having access to auditor rights
- 12:43 PM Bug #14326: Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Had a discussion with Bijoy on 30 September 2019. As per his comment it has to fix it on Sprint-5 (Regression Testing...
- 12:42 PM Bug #14326 (Closed): Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list alo...
- 12:34 PM Bug #14322 (Resolved): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 12:32 PM Bug #14322 (Open): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 12:10 PM Bug #14322 (Closed): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
Issue #... - 12:34 PM Bug #14241 (Closed): Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- Now currently compliance is renamed as Checklist
- 12:25 PM Bug #14210 (Resolved): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 12:16 PM Bug #14243 (Closed): Need filter option in process page for Site Specification
- 12:13 PM Bug #14238 (Closed): Objective evidence is not displaying as mandatory for automatically raised findings
- As per the boopathi comment filled data in remarks field and tried scenario reported another issue but the related is...
- 12:07 PM Bug #14282 (Resolved): LPA : Changed responsible person person is not displaying in audit report for findings
- Duplicate Issue:14286
- 12:01 PM Bug #14286 (In Progress): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- 12:00 PM Bug #14279 (In Progress): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- 11:52 AM Bug #14257 (Closed): By default system should display Default LPA category
- As per discussion with bijoy on 15-10-2019 11:50 Am issue is closed
- 11:52 AM Bug #14313 (In Progress): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- 11:29 AM Bug #14313 (Open): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- 11:51 AM Bug #14311 (In Progress): Effectiveness for findings: Audit programs effective due days are not saving
- 11:33 AM Bug #14311: Effectiveness for findings: Audit programs effective due days are not saving
- Should not add two different issues under one issue item as it is a separate issue.
- 11:32 AM Bug #14311 (Open): Effectiveness for findings: Audit programs effective due days are not saving
- 11:46 AM Bug #14237 (Closed): While publishing audit report is not displaying with saved success message
- 11:45 AM Bug #14308 (Open): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 11:44 AM Bug #14242 (Closed): LPA Audit: It should allow to schedule the Manufacturing line
- 11:39 AM Bug #14310 (Open): Changing the status of the project charter, the status view icon is missing in the project charter page
- 11:39 AM Bug #14315 (Open): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 10:16 AM Bug #14315 (Closed): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 11:38 AM Bug #14248 (Closed): Doc Pro level are not listed in the NC details page.
- 11:35 AM Bug #14317 (Open): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- 11:33 AM Bug #14317 (Closed): Design VDA - Structure Analysis - Context menu is not closing even after clicking outside the menu list.
- Context menu is not closing even after clicking outside the menu list
- 11:28 AM Bug #14309 (Open): "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- 10:47 AM Bug #14236 (Closed): LPA ->Audit report is not displaying findings in the report while publishing
- 10:44 AM Bug #14292 (Resolved): Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- AS per Sabu suggestion we close the tab which does not have any data in perform audit page while loading.
Tab nam... - 09:55 AM Bug #14292: Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- again we have rephrase it
- 10:44 AM Bug #14259 (Closed): LPA-> when Entered more number of character in Effectiveness due days field display error while save
- Does not display error but it is updated with 99 days so reported issue is fixed and Closed
- 10:41 AM Bug #14260 (Closed): LPA-> Audit Program created in Auditpro are displayed in LPA Category drop down
- 10:40 AM Bug #14296 (Not Resolved): Auditee response/Report: Date of audit is not displayed in Auditee response report
- Still date is not displayed in auditee->corrective actions when viewed in report
- 10:37 AM Bug #14271 (In Progress): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- 10:37 AM Bug #14258 (In Progress): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- 10:37 AM Bug #14307 (In Progress): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- 10:36 AM Bug #14285 (Resolved): LPA : Add audit activities window is not displaying Respective auditor of the particular audit
10/14/2019
- 07:54 PM Bug #14312 (Open): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 06:26 PM Bug #14312 (Closed): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 07:01 PM Bug #14313 (Closed): Perform Audit Page: Alert message should not displayed as "Please enter audit activities to continue"
- Alert message: Please enter audit activities to continue
- 06:34 PM Bug #14238 (Resolved): Objective evidence is not displaying as mandatory for automatically raised findings
- while filling checklist 'Remarks' saved in the objective evidence filed
- 05:54 PM Bug #14238 (Open): Objective evidence is not displaying as mandatory for automatically raised findings
- 06:30 PM Bug #14260 (Resolved): LPA-> Audit Program created in Auditpro are displayed in LPA Category drop down
- 05:54 PM Bug #14260 (Open): LPA-> Audit Program created in Auditpro are displayed in LPA Category drop down
- 06:30 PM Bug #14259 (Resolved): LPA-> when Entered more number of character in Effectiveness due days field display error while save
- 05:54 PM Bug #14259 (Open): LPA-> when Entered more number of character in Effectiveness due days field display error while save
- 06:30 PM Bug #14257 (Resolved): By default system should display Default LPA category
- 05:54 PM Bug #14257 (Open): By default system should display Default LPA category
- 06:30 PM Bug #14256 (Resolved): Email context for Effectiveness For Findings are not displayed in Multi site
- 05:54 PM Bug #14256 (Open): Email context for Effectiveness For Findings are not displayed in Multi site
- 06:30 PM Bug #14249 (Resolved): "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- 05:54 PM Bug #14249 (Open): "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- 06:30 PM Bug #14247 (Resolved): Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- 05:54 PM Bug #14247 (Open): Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- 06:30 PM Bug #14246 (Resolved): LPA: User should be displayed based on the Auditor access in Layer page
- 05:54 PM Bug #14246 (Open): LPA: User should be displayed based on the Auditor access in Layer page
- 06:30 PM Bug #14244 (Resolved): Shift Should drown down not textbox for planned and Actual Audit
- 05:54 PM Bug #14244 (Open): Shift Should drown down not textbox for planned and Actual Audit
- 06:30 PM Bug #14242 (Resolved): LPA Audit: It should allow to schedule the Manufacturing line
- 05:54 PM Bug #14242 (Open): LPA Audit: It should allow to schedule the Manufacturing line
- 06:30 PM Bug #14241 (Resolved): Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- 05:54 PM Bug #14241 (Open): Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- 06:30 PM Bug #14239 (Resolved): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- 05:54 PM Bug #14239 (Open): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- 06:28 PM Bug #14236 (Resolved): LPA ->Audit report is not displaying findings in the report while publishing
- Issue Fixed in Cy-1
- 05:54 PM Bug #14236 (Open): LPA ->Audit report is not displaying findings in the report while publishing
- 06:26 PM Bug #14237 (Resolved): While publishing audit report is not displaying with saved success message
- 05:54 PM Bug #14237 (Open): While publishing audit report is not displaying with saved success message
- 06:25 PM Bug #14201 (Closed): Reason for request: If its given in the rich text box, its not aligned in revision history summary
- 06:25 PM Bug #14261 (Resolved): Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- Issue Fixed in Cy-1
- 05:54 PM Bug #14261 (Open): Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- 06:25 PM Bug #14262 (Resolved): Effectiveness for findings: Effectiveness status are not properly display in tool tip
- Issue Fixed in Cy-1
- 05:54 PM Bug #14262 (Open): Effectiveness for findings: Effectiveness status are not properly display in tool tip
- 06:18 PM Bug #14248 (Fixed with Hotfix): Doc Pro level are not listed in the NC details page.
- 06:18 PM Bug #14248: Doc Pro level are not listed in the NC details page.
- Its working fine in this builds.
- 05:54 PM Bug #14248 (Open): Doc Pro level are not listed in the NC details page.
- 06:17 PM Bug #14240 (Closed): Checkpoint color code is not working in Fill checklist page
- 06:17 PM Bug #14240 (Fixed with Hotfix): Checkpoint color code is not working in Fill checklist page
- Verified
- 05:54 PM Bug #14240 (Open): Checkpoint color code is not working in Fill checklist page
- 06:17 PM Bug #14243 (Resolved): Need filter option in process page for Site Specification
- 05:54 PM Bug #14243 (Open): Need filter option in process page for Site Specification
- 06:16 PM Bug #14311 (Closed): Effectiveness for findings: Audit programs effective due days are not saving
- Effectiveness for findings: Audit programs effective due days are not saving
Impact Areas:
1) Closed out -> Cu... - 06:10 PM Bug #14207 (Closed): Related documents:Select level should shows the level based on the document access, but its showing based on the folder access
- 06:10 PM Bug #14310 (Closed): Changing the status of the project charter, the status view icon is missing in the project charter page
- changing the status of the project charter, the status view icon is missing in the project charter page.
- 06:08 PM Bug #14309 (Closed): "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- "Always show doc viewer in project tracking mode" (disabled by default) the documents are showing up in split window
- 06:08 PM Bug #14308 (Closed): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification ...
- 05:54 PM Bug #14305 (Open): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 05:14 PM Bug #14305 (Closed): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- Template should contain only the deliverable and resource .
- 05:54 PM Bug #14270 (Open): In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- 12:11 PM Bug #14270 (Closed): In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- In 8-D form while clicking on Root cause action item linkage, opens up 2 windows instead it should open only 1.
- 05:54 PM Bug #14269 (Open): Regression: Template it is showing the output icon for the attached input document.
- 12:00 PM Bug #14269 (Closed): Regression: Template it is showing the output icon for the attached input document.
- Regression: Template it is showing the output icon for the attached input document.
- 05:54 PM Bug #14267 (Open): Clicking on track project in SCAR form shows empty page.
- 11:56 AM Bug #14267 (Closed): Clicking on track project in SCAR form shows empty page.
- Clicking on track project in SCAR form shows empty page.
- 05:54 PM Bug #14266 (Open): Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- 11:55 AM Bug #14266 (Closed): Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- 05:54 PM Bug #14265 (Open): The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- 11:55 AM Bug #14265 (Closed): The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- The supplier part number selected in new concern is not getting displayed in concern initial evaluation form
- 05:54 PM Bug #14253 (Open): Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- 05:54 PM Bug #14252 (Open): Process Activities ->Unassigned site name is displayed for a process
- 05:54 PM Bug #14307 (Open): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- 05:53 PM Bug #14307 (Closed): LPA : Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified and audit is not getting closed
- Verification and Validation is specified as "Yes" Auditor->correction and closeout status is displaying Not verified ...
- 05:54 PM Bug #14306 (Open): The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- 05:50 PM Bug #14306 (Closed): The document viewer is not showing up all the tasks of 2 projects- (Supplier PPAP only)
- The document viewer is not showing up all the tasks of project. Only first few tasks is displaying for the given 2 pr...
- 05:54 PM Bug #14274 (Open): Groups: When creating a new group, By default view documents rights should be checked
- 01:15 PM Bug #14274 (Closed): Groups: When creating a new group, By default view documents rights should be checked
- Groups: When creating a new group, By default view documents rights should be checked
- 05:54 PM Bug #14273 (Open): LPA : Findings attachment against the checkpoints when tried to view after attached it displays a popup "Linked document with this revision is not available"
- 01:14 PM Bug #14273 (Closed): LPA : Findings attachment against the checkpoints when tried to view after attached it displays a popup "Linked document with this revision is not available"
- Findings attachment against the checkpoints when tried to view after attached displays "Linked document with this rev...
- 05:54 PM Bug #14272 (Open): Archive Project is not site specific.
- 12:52 PM Bug #14272 (Closed): Archive Project is not site specific.
- The projects archived in one site is showing up under archived projects of other site.
- 05:54 PM Bug #14271 (Open): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- 12:43 PM Bug #14271 (Closed): LPA :Effectiveness due days field in LPA Category is not displaying days entered in field after save
- Effectiveness due days field in LPA Category is not displaying days entered in field after save.
- 05:54 PM Bug #14268 (Open): Template to project conversion - Showing error Supplier PPAP
- 11:58 AM Bug #14268 (Closed): Template to project conversion - Showing error Supplier PPAP
- While converting template to project getting "converted successfully" alert but clicking on OK redirecting to error p...
- 05:54 PM Bug #14264 (Open): Problem on Level Creation as Administrator
- 11:05 AM Bug #14264 (Closed): Problem on Level Creation as Administrator
- Created a level for the first time as administrator level is getting created as an another parent level of the same l...
- 05:54 PM Bug #14258 (Open): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- 05:54 PM Bug #14250 (Open): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- 05:54 PM Bug #14245 (Open): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:44 PM Bug #14294: While approving the respective action in approver login displays dual window after approver
- Action management issue. already discussed with mohan in 900
- 04:52 PM Bug #14294 (Open): While approving the respective action in approver login displays dual window after approver
- 03:31 PM Bug #14294 (Closed): While approving the respective action in approver login displays dual window after approver
- While approving the respective action in approver login displays dual window after approver
- 05:43 PM Bug #14296 (Resolved): Auditee response/Report: Date of audit is not displayed in Auditee response report
- 05:43 PM Bug #14296: Auditee response/Report: Date of audit is not displayed in Auditee response report
- WAD. Discussed in sprint
- 04:52 PM Bug #14296 (Open): Auditee response/Report: Date of audit is not displayed in Auditee response report
- 03:37 PM Bug #14296 (Closed): Auditee response/Report: Date of audit is not displayed in Auditee response report
- Auditee response/Report: Date of audit is not displayed in Auditee response
1) Login as Auditee
2) Click the Aud... - 05:04 PM Bug #14198 (Resolved): Process VDA - Structure Analysis - Server error is displayed while selecting Create Operation and FourM Categories.
- 04:52 PM Bug #14302 (Open): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 04:38 PM Bug #14302 (Closed): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- Filter Dropdown for Operation and FourM category is not working properly.
- 04:52 PM Bug #14301 (Open): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 04:29 PM Bug #14301 (Closed): Process VDA - Function/Failure Analysis - Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- Data Edited in Diagrammatic view is reflected only on Refresh in Tree/Table view.
- 04:52 PM Bug #14300 (Open): Attached attachment name displays in number format after attached
- 04:28 PM Bug #14300 (Closed): Attached attachment name displays in number format after attached
- Attached attachment name displays in number format after attached
- 04:52 PM Bug #14298 (Open): Process VDA - There is no option to add Severity for the added Effect.
- 03:39 PM Bug #14298 (Closed): Process VDA - There is no option to add Severity for the added Effect.
- Need to add Severity drop down as in Design VDA.
By default system is taking Severity value as 10 in Failure(Effec... - 04:52 PM Bug #14297 (Open): LPA : while attaching attachment in 8D form displays error
- 03:38 PM Bug #14297 (Closed): LPA : while attaching attachment in 8D form displays error
- while attaching attachment in 8D form displays error
- 04:52 PM Bug #14293 (Open): Not able to publish the charter of Change management initiated project.
- 03:29 PM Bug #14293 (Closed): Not able to publish the charter of Change management initiated project.
- 04:52 PM Bug #14292 (Open): Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- 04:15 PM Bug #14292: Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- Cannot able to understand the issue
- 03:27 PM Bug #14292 (Closed): Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- Perform Audit: While login into perform audit page nc/ofi breadcrumb should be open and breadcrumb is closed while se...
- 04:52 PM Bug #14291 (Open): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- 03:26 PM Bug #14291 (Closed): While converting Draft to a project clicking on Add Supplier button is not responding( Both APQP and Supplier PPAP)
- While converting Draft to a project clicking on Add Supplier button is not responding
- 04:52 PM Bug #14290 (Open): LPA : Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan waiting for approval" alert message
- 03:21 PM Bug #14290 (Closed): LPA : Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan waiting for approval" alert message
- Though Audit report is waiting for approval when clicked on resubmit for approval system does not displays as "Plan w...
- 04:52 PM Bug #14289 (Open): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- 03:19 PM Bug #14289 (Closed): Process VDA - While opening Process Flow, system displays JS error.(Refer Description)
- While opening Process Flow, system displays JS error.(Refer Description)
- 04:52 PM Bug #14288 (Open): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- 03:19 PM Bug #14288 (Closed): Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Import XML(Both APQP and Supplier PPAP)
- Supplier related icons are not showing in the charter for Project creation via Convert a template to project and Impo...
- 04:52 PM Bug #14287 (Open): Regression: select a Draft project and Click on Projects menu, the project listing screen is opening in the new tab.(Change the pillar and click on projects menu)
- 03:10 PM Bug #14287 (Closed): Regression: select a Draft project and Click on Projects menu, the project listing screen is opening in the new tab.(Change the pillar and click on projects menu)
- 04:52 PM Bug #14286 (Open): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- 03:08 PM Bug #14286 (Closed): Perform audit after publish:Action Recommended data is not displayed and auditee response is incorrect in improvements suggested tab
- We have changed auditee as Global process Owner
- 04:52 PM Bug #14285 (Open): LPA : Add audit activities window is not displaying Respective auditor of the particular audit
- 03:03 PM Bug #14285 (Closed): LPA : Add audit activities window is not displaying Respective auditor of the particular audit
- Add audit activities window is not displaying Respective auditor of the particular audit
- 04:52 PM Bug #14284 (Open): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- 03:03 PM Bug #14284 (Closed): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hi...
- 04:52 PM Bug #14282 (Open): LPA : Changed responsible person person is not displaying in audit report for findings
- 02:52 PM Bug #14282 (Closed): LPA : Changed responsible person person is not displaying in audit report for findings
- Changed responsible person person is not displaying in audit report for findings
- 04:52 PM Bug #14281 (Open): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- 02:49 PM Bug #14281 (Closed): Process/Activities page:Unwanted pop up is displayed while changing the site drop in Process/Activities page.
- Process/Activities page:Unwanted pop up is displayed while changing the Site drop in Process/Activities page.
- 04:52 PM Bug #14280 (Open): Not able to attach document from DocPro - Not working
- 02:46 PM Bug #14280 (Closed): Not able to attach document from DocPro - Not working
- 04:52 PM Bug #14279 (Open): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- 02:43 PM Bug #14279 (Closed): LPA : LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Template while publishing
- LPA Audit report publish is not displaying Non conformity and Opportunity for improvements entered data in Report Tem...
- 04:52 PM Bug #14278 (Open): LPA : while creating equipment under manufacturing line displays error
- 02:36 PM Bug #14278 (Closed): LPA : while creating equipment under manufacturing line displays error
- while creating equipment under manufacturing line displays error
- 04:52 PM Bug #14277 (Open): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 02:33 PM Bug #14277 (Closed): EFC tree: After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- After flow down is done in EFC tree the published doc is displayed blank while clicking on view document
- 04:52 PM Bug #14276 (Open): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 02:25 PM Bug #14276 (Closed): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 04:52 PM Bug #14275 (Open): SB-190910324 In similar concern pop up Cancel button is not working.
- 01:26 PM Bug #14275 (Closed): SB-190910324 In similar concern pop up Cancel button is not working.
- SB-190910324 In similar concern pop up Cancel button is not working.
- 01:11 PM Bug #14202 (Closed): New document request table:when special character " is entered it shows as html tags in table under reason for request and also the characters entered after >this symbol is not displayed in table but it show in rev his summary
- Closed in cy 2
10/11/2019
- 07:01 PM Bug #14257: By default system should display Default LPA category
- AS discussed in sprint, no need show default categories
- 03:54 PM Bug #14257 (Closed): By default system should display Default LPA category
- By default system should display Default LPA category
As : NC-Layer process audit
OFI-Layer process audit w... - 06:21 PM Bug #14248: Doc Pro level are not listed in the NC details page.
- cannot able to replicate
- 05:47 PM Bug #14262 (Closed): Effectiveness for findings: Effectiveness status are not properly display in tool tip
- Green+Yellow -> Proceed to deadline+Not verified
Red+Yellow -> Deadline Violated+Not verified - 05:43 PM Bug #14261 (Closed): Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- Effectiveness for findings :Label are missing for effectiveness verified ,Effectiveness due date
- 04:01 PM Bug #14260 (Closed): LPA-> Audit Program created in Auditpro are displayed in LPA Category drop down
- Audit programs which are created in Audit pro are displaying in LPA Category in Audit program drop down when clicked
- 03:59 PM Bug #14259 (Closed): LPA-> when Entered more number of character in Effectiveness due days field display error while save
- when Entered more number of character in Effectiveness days field display error while save
Ex: 522155488512123346 - 03:57 PM Bug #14258 (Closed): LPA->LPA category Effectiveness due days Should not display "0" instead it should display blank if 0 value is set in it
- LPA->LPA category Effectiveness days Should not display "0" instead it should display blank if 0 value is set in it
- 03:19 PM Bug #14256 (Closed): Email context for Effectiveness For Findings are not displayed in Multi site
- email context for Effectiveness For Findings are not displayed in Multi site
- 02:22 PM Bug #14202 (Resolved): New document request table:when special character " is entered it shows as html tags in table under reason for request and also the characters entered after >this symbol is not displayed in table but it show in rev his summary
- 02:22 PM Bug #14201 (Resolved): Reason for request: If its given in the rich text box, its not aligned in revision history summary
- 02:22 PM Bug #14207 (Resolved): Related documents:Select level should shows the level based on the document access, but its showing based on the folder access
- 12:18 PM Bug #14253 (Closed): Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- Process Activities -> Inactive or deleted sites should be displayed for existing process - row.
- 12:07 PM Bug #14252 (Closed): Process Activities ->Unassigned site name is displayed for a process
- Process Activities -> By default the site dropdown is displaying as corporate while adding new row for a process. But...
- 10:15 AM Bug #14247: Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- Yes,I agree.
After discuss with bijoy, I have raised this issue. - 09:47 AM Bug #14247: Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- Is it a requirement in master checklist page?
- 09:51 AM Bug #14250 (Closed): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
10/10/2019
- 09:50 PM Bug #14243: Need filter option in process page for Site Specification
- Issue is fixed and patches moved to Build and send for verification
- 05:17 PM Bug #14243 (Closed): Need filter option in process page for Site Specification
- Need filter option in process page for Site Specification
- 06:44 PM Bug #14249 (Closed): "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- "Remarks needs to be renamed as ""Remarks / Objective Evidence"" in fill checklist screen"
- 06:41 PM Bug #14248: Doc Pro level are not listed in the NC details page.
- Assign to respective teams
- 06:33 PM Bug #14248 (Closed): Doc Pro level are not listed in the NC details page.
- Doc Pro level are not listed in the NC details page.
- 06:35 PM Bug #14239: like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- Cannot able to replicate
- 03:07 PM Bug #14239 (Closed): like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child
- like wise logic is applicable from parent checkpoint to child same way color code should be applicable for child but ...
- 06:33 PM Bug #14240: Checkpoint color code is not working in Fill checklist page
- Not an issue: Refer Screenshot
- 05:03 PM Bug #14240 (Closed): Checkpoint color code is not working in Fill checklist page
- Checkpoint color code is not working in Fill checklist page
Import checklist page in Supplier management
1) L... - 05:56 PM Bug #14237: While publishing audit report is not displaying with saved success message
- Cannot able to replicate: ref screen shot for Same audit
- 02:37 PM Bug #14237 (Closed): While publishing audit report is not displaying with saved success message
- While publishing audit report is not displaying with saved success message
- 05:49 PM Bug #14247 (Closed): Filll Checklist:No need to show the Checkpoints, Need to show only checklists.
- No need to show the Checkpoints, Need to show only checklists.
- 05:37 PM Bug #14246 (Closed): LPA: User should be displayed based on the Auditor access in Layer page
- LPA: User should be displayed based on the Auditor access in Layer page
- 05:29 PM Bug #14245 (Closed): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- 05:20 PM Bug #14244 (Closed): Shift Should drown down not textbox for planned and Actual Audit
- 05:13 PM Bug #14242 (Closed): LPA Audit: It should allow to schedule the Manufacturing line
- LPA Audit: It should allow to schedule the Manufacturing line
- 05:07 PM Bug #14241 (Closed): Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- Checklist page are common, so it should be Checklist not compliance & VAM Checklist
- 03:01 PM Bug #14238 (Closed): Objective evidence is not displaying as mandatory for automatically raised findings
- Objective evidence is not displaying as mandatory for automatically raised findings
- 02:32 PM Bug #14236 (Closed): LPA ->Audit report is not displaying findings in the report while publishing
- Audit report is not displaying findings in the report while publishing
10/09/2019
- 01:04 PM Bug #14221 (Open): Production Inprocess: All Search is not working if Production Inprocess is enabled in IC Settings
- 01:04 PM Bug #14219 (Open): Production Inprocess & Dept Worksheet : After clicking search on Operations/Equipments pop-up respective images are getting changed
- 01:04 PM Bug #14211 (Open): If an Inspection is Inprogress its allowing to create a new schedule for Receiving Inspection but not allowing for Final Inspection.Need a common rule set for both the Inspections
- 01:04 PM Bug #14210 (Open): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 01:04 PM Bug #14209 (Open): Inspection form Standard : Search by Notification interval not working
- 01:04 PM Bug #14207 (Open): Related documents:Select level should shows the level based on the document access, but its showing based on the folder access
- 01:04 PM Bug #14203 (Open): When entering document name with special character then it shows different alert. Show common alert when the special characters are not accepted.Same for file name which has spl char(Attached the doc for ref))
- 01:04 PM Bug #14202 (Open): New document request table:when special character " is entered it shows as html tags in table under reason for request and also the characters entered after >this symbol is not displayed in table but it show in rev his summary
- 01:04 PM Bug #14201 (Open): Reason for request: If its given in the rich text box, its not aligned in revision history summary
- 01:04 PM Bug #14198 (Open): Process VDA - Structure Analysis - Server error is displayed while selecting Create Operation and FourM Categories.
10/04/2019
- 03:50 AM Bug #14221 (Closed): Production Inprocess: All Search is not working if Production Inprocess is enabled in IC Settings
- Production Inprocess: All Search is not working if Production Inprocess is enabled in IC Settings
- 12:57 AM Bug #14219 (Closed): Production Inprocess & Dept Worksheet : After clicking search on Operations/Equipments pop-up respective images are getting changed
- Production Inprocess & Dept Worksheet : After clicking Operations/Equipments pop-up search button,respective images a...
- 12:37 AM Bug #14211 (Closed): If an Inspection is Inprogress its allowing to create a new schedule for Receiving Inspection but not allowing for Final Inspection.Need a common rule set for both the Inspections
- For Receiving Inspection,if a schedule is already InProgress its allowing to create a new schedule
But in case of Fi... - 12:09 AM Bug #14210 (Closed): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- Inspection Sheet ->Value Entry Pop-up->Save option Showing multiple times
- 12:05 AM Bug #14209 (Closed): Inspection form Standard : Search by Notification interval not working
- Inspection form Standard : Search by Notification interval not working
Inspection Parameters->Characteristics Grid...
10/03/2019
- 11:51 PM Bug #14207 (Closed): Related documents:Select level should shows the level based on the document access, but its showing based on the folder access
- Related documents:Select level should shows the level based on the document access, but its showing based on the fold...
- 05:36 PM Bug #14203 (Closed): When entering document name with special character then it shows different alert. Show common alert when the special characters are not accepted.Same for file name which has spl char(Attached the doc for ref))
- ~`!@#$%^&*()_+-=[]\;’,./{}|:”<>?
- 05:29 PM Bug #14202: New document request table:when special character " is entered it shows as html tags in table under reason for request and also the characters entered after >this symbol is not displayed in table but it show in rev his summary
- please support all spl character, I didnt verified for all spl characters..will check and update later
- 05:28 PM Bug #14202 (Closed): New document request table:when special character " is entered it shows as html tags in table under reason for request and also the characters entered after >this symbol is not displayed in table but it show in rev his summary
- New document request table:when special character " is entered it shows as html tags in table under reason for reques...
- 05:22 PM Bug #14201 (Closed): Reason for request: If its given in the rich text box, its not aligned in revision history summary
- Reason for request: If its given in the rich text box, its not aligned in revision history summary
10/01/2019
- 05:22 PM Bug #14198 (Closed): Process VDA - Structure Analysis - Server error is displayed while selecting Create Operation and FourM Categories.
- Server error is displayed while selecting Create Operation and FourM Categories.
09/30/2019
- 04:05 PM Bug #14096 (Fixed with Hotfix): Click to view report is not displaying audit status and audit date
- 01:49 PM Bug #14096 (Resolved): Click to view report is not displaying audit status and audit date
- Audit Status Cannot able to replicate. Audit Date will come once it is published. It is published Date. So first time...
- 01:34 PM Bug #14096 (Open): Click to view report is not displaying audit status and audit date
Also available in: Atom