Activity
From 03/05/2018 to 04/03/2018
03/26/2018
- 04:17 AM Bug #5171 (Future Release): CM:When ECR form is published,then it is not displayed under the DocPro (Module/Specified Level) folder
- Expecting the Patch for the same
03/22/2018
- 01:02 PM Bug #2853 (Closed): When the routes are edited in document management, then the route is not followed when revising the document (only when revising the document without attaching the document and it goes via assign author)
- bhuvana verified in SP730 Cycle 8 and Closing this issue
- 01:00 PM Bug #5171 (Open): CM:When ECR form is published,then it is not displayed under the DocPro (Module/Specified Level) folder
- 10:43 AM Bug #5171 (Closed): CM:When ECR form is published,then it is not displayed under the DocPro (Module/Specified Level) folder
- When ECR form is published,then it is not displayed under the DocPro (Module/Specified Level) folder.(When Batch Proc...
- 09:33 AM Unit Level and Cosmetic Issues #4140 (Closed): In New Route page enter the Route name in Route Name field and click on Save button, Updated successfully is displayed, whereas Saved successfully should display
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:33 AM Unit Level and Cosmetic Issues #4140 (Resolved): In New Route page enter the Route name in Route Name field and click on Save button, Updated successfully is displayed, whereas Saved successfully should display
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:32 AM Bug #4013 (Closed): New document request→ sites are not displayed when the PPT1 site user is added in a new group(Only when the default rights are not changed) and also New document request sites are not displayed when the PPT1 site user has group access in PPT2 site
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:32 AM Bug #4016 (Closed): Access Rights:User override is not working,due to this site dropdown is not displayed in New document request
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:32 AM Bug #4948 (Closed): Advanced search:Clicking on Back link should shows the advanced search results rather its showing the particular level in TOC view
- closing this thiis as Bbhuvana verified this issues in SP730
- 09:31 AM Bug #4017 (Closed): Multisite:When the PPT2 user has Site access rights for the PPT1 folder then PPT1 site is not displayed for the PPT2
- closing this thiis as Bbhuvana verified this issues in SP730
03/21/2018
- 06:52 PM Bug #4014 (Closed): Multilang(Chinese and spanish) : "Document rights" header label and * search column order is W.R.T table's column order label are not converted
- Closed in Cycle 8
03/20/2018
- 06:32 PM Bug #2335 (Closed): Aqua Output document name is displayed in Deliverable Info page before Aqua document is published
- This seems to be not an issue so closing this issue
- 06:30 PM Unit Level and Cosmetic Issues #4072 (Closed): Archive Project alert Plural form need to be changed:When there is no multiple project selection.
- this seems to be not an issue so closing this issue
- 06:25 PM Usability #4084 (Closed): When saving the Project data from silverlight page.(Print option) data looks clumsy.
- Need to discuss as this is related with pdf, But this issue needs to be addressed or else give a proper error message...
- 06:21 PM Usability #4083 (Closed): When clicking on show header in the deliverable list page, project details are displayed inconsistently.
- Since this page is converting to Jquery this will be getting addressed so closing this issue
03/19/2018
- 12:20 PM Bug #5027 (Closed): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- Verified all the attachments where ever revision is applicable working as expected.
- 11:56 AM Bug #5100 (Closed): Audit status route is not displaying while publishing audit report using the publish window.
- 10:03 AM Bug #4711 (Closed): Spanish Language: Import and Security Menu are displaying as "Message Id 31 not found?"
- Abu verified in SP730 cycle 8 and found working hence closing this issue
- 10:03 AM Bug #4710 (Closed): Spanish Language: Cant able to Open the Aqua Main Menu and its showing as "Conversion from String" Error Message
- Abu verified in SP730 cycle 8 and foud working hence closing this issue
03/17/2018
- 02:01 PM Bug #4697 (Closed): Form Sheets: In all the Inspection Forms, Right-Arrow is not working and not showing the Next Shift Form
- This Issue was Verified in Last Cycle and the Issue was Fixed so the QA Team is Closing this Issue.
03/16/2018
- 11:20 AM Bug #1628 (Closed): Burndown chart does not display the correct values on the graph
- Verified in Cycle 8 by ramya and closing this issue
- 10:10 AM Bug #1628 (Future Release): Burndown chart does not display the correct values on the graph
- 09:35 AM Bug #1628: Burndown chart does not display the correct values on the graph
- Moving this issue to SP750 as QA did not get any fix till cycle 8 - Delayed task count is mismatching ( Everything wa...
- 10:26 AM Bug #4712 (Closed): Chinese Language: All the Tabs, Menus are Loading as "??" Symbols
- 10:25 AM Bug #4712 (Future Release): Chinese Language: All the Tabs, Menus are Loading as "??" Symbols
- Since there is no fix from dev team till Cycle 8 moving this issue in to Future release
03/15/2018
- 05:45 PM Bug #5100 (Resolved): Audit status route is not displaying while publishing audit report using the publish window.
- 09:36 AM Bug #5100 (Open): Audit status route is not displaying while publishing audit report using the publish window.
- 01:55 PM Bug #4751 (Closed): Reports:when reason for request is formatted, then in reports its showing with HTML tag
- 10:38 AM Unit Level and Cosmetic Issues #4594 (Closed): Module: Click on Select Users-> Label missing in the header.
- Verified by ragavi on Sp730 and closing this issue
- 10:37 AM Unit Level and Cosmetic Issues #4594 (Resolved): Module: Click on Select Users-> Label missing in the header.
- Verified by ragavi on Sp730 and closing this issue
- 10:36 AM Bug #5052 (Closed): In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side but clicking on “<” button hangs the system and then the user not able to perform any operations.
- 10:36 AM Bug #5086 (Closed): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
03/14/2018
- 07:16 PM Bug #5027 (Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 03:02 PM Bug #5027 (Not Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 06:44 PM Bug #4003 (Closed): TBD:Purpose of keyword link in owned documents
- verified in SP730 and hence Closing the issue
- 06:17 PM Bug #4003: TBD:Purpose of keyword link in owned documents
- Keyword link is removed as discussed with sabu.Changed for seasons
- 06:44 PM Bug #3336 (Closed): Label change needed in Administrator Actions under Doc Pro(Only in some of the existing dbs)
- verified in SP730 and hence Closing the issue
- 06:43 PM Bug #2941 (Closed): Routes page after searched For the data which is not in the list should display as "No data Found".
- verified in SP730 and hence Closing the issue
- 06:43 PM Bug #2835 (Closed): Impact:Cant able to do a New document request when requesting the document without entering the keyword,reason for req fields
- verified in SP730 and hence Closing the issue
- 06:43 PM Bug #2761 (Closed): Primary Module administrator is changing automatically(cant able to replicate, but Occurs very Frequently when testing doc pro)
- verified in SP730 and hence Closing the issue
- 06:42 PM Bug #2714 (Closed): Reports->Related document list->It shows an alert "The revision parameter is missing a value " is displayed when clicked on View Report button and report is not displayed
- verified in SP730 and hence Closing the issue
- 06:42 PM Bug #2479 (Closed): Archive Management:When editing the document owner, no scroll bar to see the users,
- verified in SP730 and hence Closing the issue
- 06:42 PM Bug #2717 (Closed): Retained documents->When clicked on a deleted document, it throws a server error
- verified in SP730 and hence Closing the issue
- 06:14 PM Bug #4858 (Closed): Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- Issue got Closed in SP730 cycle 8.
All the five symbols related issues are closed - 06:00 PM Bug #4716 (Closed): Report : (Impact) project summary report: Project actual finish date is displayed when there is a deliverable which is not started and completed.
- closing this issue in SP730 cycle 8
1)In Risk column month name is displayed as Unknown
2)In the task status and ... - 05:58 PM Bug #3584 (Closed): Yazaki: In Audit Program -> Audit Type mapping. if audit type name is having special character in it, while adding online form and clicking on add shows option to upload Files instead it should show Available checklist in the application
- 01:16 PM Bug #3584: Yazaki: In Audit Program -> Audit Type mapping. if audit type name is having special character in it, while adding online form and clicking on add shows option to upload Files instead it should show Available checklist in the application
- Verified in SP730 C8 and closing this issue ( Rupa and Raja)
- 05:58 PM Bug #1628: Burndown chart does not display the correct values on the graph
- Issue not resolved in Cycle 8 SP730
- 05:50 PM Bug #1628 (Not Resolved): Burndown chart does not display the correct values on the graph
- Issue Not Resolved
- 12:55 PM Bug #1628 (Resolved): Burndown chart does not display the correct values on the graph
- 05:46 PM Bug #4880 (Closed): FSR: There is no option to change the color for the Non Standard ASIL Values in the Matrix Cell Values
- This issue is fixed in FSR but in IFM external element allocation is dispalyed in VOC.
- 05:39 PM Bug #2707 (Closed): Burn down chart does not display the correct values-Total Task is mismatched with the no of deliverable in the project
- Issue Closed in SP 730 cycle 8
- 11:47 AM Bug #2707 (Resolved): Burn down chart does not display the correct values-Total Task is mismatched with the no of deliverable in the project
- 05:25 PM Bug #4597 (Closed): In Some of the pages multi language labels are not converted in Chinese and Spanish.
- All the issues got fixed Except "11. Training series header shows some numbers in Spanish" Issue.
- 05:13 PM Bug #4583 (Closed): Problem in groups menu for reports when user preference is set to Chinese or Spanish.
- 05:08 PM Bug #4583 (Resolved): Problem in groups menu for reports when user preference is set to Chinese or Spanish.
- 05:13 PM Bug #4585 (Closed): Some of the emails are missing in customized email messages
- 05:08 PM Bug #4585 (Resolved): Some of the emails are missing in customized email messages
- 05:13 PM Bug #4589 (Closed): Lable issue in audit cycle page for the "FirstWeekOfYear "
- 05:08 PM Bug #4589 (Resolved): Lable issue in audit cycle page for the "FirstWeekOfYear "
- 05:13 PM Bug #4548 (Yet to Verify): Problem on the planned audit approval rejection alert message.
- 05:08 PM Bug #4548 (Resolved): Problem on the planned audit approval rejection alert message.
- 05:12 PM Bug #4547 (Closed): Publish window label conversion issue
- 05:08 PM Bug #4547 (Resolved): Publish window label conversion issue
- 05:01 PM Bug #4742 (Closed): Report : Project summary - Clicking on the risk icon not redirected to the risk register report.
- closing this issue in SP730 Cycle8
- 04:24 PM Bug #4715 (TBD): When a approver approves a document, all the links in the document and in the breadcrumb should be disabled. JS occurs when clicking on "Add Supplier" link. Occurs when PDF is disabled.
- Need to discuss as this is related with pdf, But this issue needs to be addressed or else give a proper error message...
- 04:21 PM Bug #4715 (In Progress): When a approver approves a document, all the links in the document and in the breadcrumb should be disabled. JS occurs when clicking on "Add Supplier" link. Occurs when PDF is disabled.
- 04:20 PM Bug #5068 (Known Issue): APQP: Published charter page charter template form facing issue
- Needs to be fix in SP750
- 04:18 PM Bug #2715 (Closed): Reports: Date format is not displayed as per the user and administrator preference date format
- Verified in SP730 and closing this issue
- 12:11 PM Bug #2715: Reports: Date format is not displayed as per the user and administrator preference date format
- Expecting the user preference date format will display in the Report as well
- 12:11 PM Bug #2715 (TBD): Reports: Date format is not displayed as per the user and administrator preference date format
- 12:11 PM Bug #2715 (In Progress): Reports: Date format is not displayed as per the user and administrator preference date format
- 04:01 PM Bug #4964 (Closed): Multilanguage- User Loggin - When changing the languages for a user, system is displaying alert in first selected language even after changing to other languages.
- Closed in SP730 Cycle 8
- 03:36 PM Bug #4916 (Closed): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- 03:30 PM Bug #4882 (Closed): Auditee response when clicked on the hyperlink displays 500 server error
- 03:28 PM Bug #4973 (Closed): IC Settings: Cant able to Save the Edited/Updated Settings for Chinese/Spanish Languages
- 03:28 PM Bug #22 (Closed): Corrective Action (multi language)
- 02:32 PM Bug #5100 (Closed): Audit status route is not displaying while publishing audit report using the publish window.
- Scenario: in audit status select the route as "approval route 1" and while publishing the audit report in publish win...
- 02:24 PM Bug #5023 (Closed): Audit report publish window displays the wrong route to which the audit report is publish
- 01:02 PM Bug #2662: Gage Visual Management Report:Clicking on the study link redirects to the study page but does not allows to perform study
- This issue will get closed only when the Calibration verification screen converted to MVC page.
- 12:57 PM Bug #1102 (Closed): Reports - In Risk reduction rate reports Average RPN value column displays Error ,when Occurrence value is not enter.
- Verified in SP730 and Closing this issue
- 12:56 PM Bug #4096 (Future Release): When importing the completed project,opening the project shows the Percentage completion as 100 for all the task.
- 12:56 PM Usability #4094 (Future Release): Refresh issue on customized email messages.
- 12:56 PM Unit Level and Cosmetic Issues #4091 (Future Release): Project groups cant be deleted at first creation other than default
- 12:56 PM Usability #4084 (Future Release): When saving the Project data from silverlight page.(Print option) data looks clumsy.
- 12:56 PM Usability #4083 (Future Release): When clicking on show header in the deliverable list page, project details are displayed inconsistently.
- 12:56 PM Unit Level and Cosmetic Issues #4078 (Future Release): In Archived projects,Site,goal,scope and deliverable details are displayed with Html tags.
- 12:56 PM Unit Level and Cosmetic Issues #4072 (Future Release): Archive Project alert Plural form need to be changed:When there is no multiple project selection.
- 12:56 PM Bug #4071 (Future Release): Action Page->Documents-Select the reqest ->click on Home button. No response
- 12:43 PM Bug #3596: Frequency field in the study should not be specified as optional field-Bias,External lab calibration,Gage RR Variable and Stability
- For Stability,Bias,Calibration,External lab calibration,Gage RR attribute issue got fixed.
Only for Gage RR variab... - 12:17 PM Bug #4085 (Future Release): GYR/Task Rating: After one publish of a plan document and seeing the task rating it is not updated as per the GYR task rating.
- This is an issue and needs to be addressed
- 09:47 AM Bug #5017 (Closed): In Bulk publish :Not able to pick level in docpro level Selection
03/13/2018
- 08:59 PM Bug #2479 (Future Release): Archive Management:When editing the document owner, no scroll bar to see the users,
- 07:31 PM Unit Level and Cosmetic Issues #4137 (Future Release): In New Document Request page Don’t select the Document Level and in the Document Number field enter the Document Number and click on Document Name field the pop up message "Please define site levels first." is displayed and select the Document Level again
- 07:31 PM Bug #2717 (Future Release): Retained documents->When clicked on a deleted document, it throws a server error
- 07:31 PM Bug #2714 (Future Release): Reports->Related document list->It shows an alert "The revision parameter is missing a value " is displayed when clicked on View Report button and report is not displayed
- 07:31 PM Usability #4158 (TBD): TBD:Click on View Document place the mouse cursor away from the document Zoom (In & Out) is not displayed, pointer arrow is displayed The Text "PLEASE AVOID USING KEYBOARD" is partially displayed
- 07:31 PM Usability #4154 (TBD): TBD:Click on View Document Zoom In the document around 150% and click on document 63% is displayed
- 07:30 PM Bug #4175 (Future Release): Edit Document:Review date should not accept the date lesser than the document published date.Document is coming in actions only when the review date is within a month
- 07:30 PM Bug #4144 (Future Release): In the Browse of the document it accepts the exe file, added successfully but in the document couldn’t able to see the uploaded exe file--Need to restict the non supported extensions
- 07:30 PM Usability #4115 (Future Release): Insert data field should be opened then and there in the pdf template creation
- 07:30 PM Bug #3636 (Future Release): TOC:Source level is displayed in the TOC when clicking back link from the integrated document(same in Advanced search)
- 07:30 PM Bug #3336 (Future Release): Label change needed in Administrator Actions under Doc Pro(Only in some of the existing dbs)
- 07:30 PM Bug #2853 (Future Release): When the routes are edited in document management, then the route is not followed when revising the document (only when revising the document without attaching the document and it goes via assign author)
- 07:30 PM Bug #2835 (Future Release): Impact:Cant able to do a New document request when requesting the document without entering the keyword,reason for req fields
- 07:30 PM Bug #2763 (Future Release): Document is not going for approval process as expected(When requester and approver are same)
- 07:30 PM Bug #2761 (Future Release): Primary Module administrator is changing automatically(cant able to replicate, but Occurs very Frequently when testing doc pro)
- 07:30 PM Bug #4103 (TBD): TBD:When admin bypassing the first round of approvers then terminate button should be disabled for the requester
- 05:42 PM Bug #5013 (Closed): Problem on holiday list for Auditee response due date/Auditee revised due date.
- 05:22 PM Bug #5017 (Resolved): In Bulk publish :Not able to pick level in docpro level Selection
- 05:01 PM Bug #2715 (WAD): Reports: Date format is not displayed as per the user and administrator preference date format
- 04:59 PM Bug #2715: Reports: Date format is not displayed as per the user and administrator preference date format
- Currently we have implemented only in DocPro & AuditPro - Pandora's request. The current format can globally be under...
- 04:34 PM Bug #4844 (Closed): Aqua Security: Aqua Security is not working
- 02:31 PM Bug #4844 (Resolved): Aqua Security: Aqua Security is not working
03/12/2018
- 04:36 PM Bug #4880 (Resolved): FSR: There is no option to change the color for the Non Standard ASIL Values in the Matrix Cell Values
- 02:50 PM Bug #4921 (Closed): CM: ECR form - Risk and opportunity sheet.
- 1)When the Risk value is gets changed because of updating the severity and occurrence it shows alert as priority scor...
- 02:45 PM Bug #4921: CM: ECR form - Risk and opportunity sheet.
- browser rendering is slow to process the formula request
- 01:07 PM Bug #4921: CM: ECR form - Risk and opportunity sheet.
- 1)User pop up window displaced incorrectly on selection of "who" in the risk form.-Issue closed
2)When the Risk valu... - 02:28 PM Bug #4742 (Reopen): Report : Project summary - Clicking on the risk icon not redirected to the risk register report.
- Reopen in Cycle7
- 02:21 PM Bug #5053 (Closed): Project summary report - Report does not display any data. Only data related to RISK are displayed
- Issue Got closed in SP 730 cycle 7
- 02:20 PM Bug #5053 (Resolved): Project summary report - Report does not display any data. Only data related to RISK are displayed
- 12:57 PM Bug #4858: Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- < symbol fixed,> symbol fixed,& symbol fixed
above three symbols are fixed but ' and " not fixed all reports - 12:36 PM Bug #4716 (Not Resolved): Report : (Impact) project summary report: Project actual finish date is displayed when there is a deliverable which is not started and completed.
- Project summary report: Project actual start date and finish date column displayed empty- Reported issue got closed.
... - 12:30 PM Bug #5086: In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- KPI changes are working earlier
- 12:04 PM Bug #5086 (Resolved): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- Fix ready for next build
- 10:32 AM Bug #5086 (Future Release): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- This seems to be a new functionality added and QA missed out in the earlier cycle as well. Di sussed with sabu and mo...
- 10:31 AM Bug #5086 (TBD): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- 10:12 AM Bug #5086 (Closed): In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able to deploy the goals to other entity/Position/Employee
- In Deploy goals and objective page, if the Expectation category is bench marked with KPI, then the user is not able t...
- 12:22 PM Bug #5081 (Closed): Copy process or design segment which have existing data and paste the existing data Global PI process segment open it shows blank
- Closing this issue as its seems to be data related issue and could not able to reproduce in Cycle2
- 11:30 AM Bug #5081: Copy process or design segment which have existing data and paste the existing data Global PI process segment open it shows blank
- This issue occurs in EwQIMS_Inst1 and not able to replicate in EwQIMS_Inst 2.
- 12:05 PM Bug #5052 (Resolved): In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side but clicking on “<” button hangs the system and then the user not able to perform any operations.
- Patch ready for next build
- 11:25 AM Bug #5027 (Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 11:23 AM Bug #5013 (Resolved): Problem on holiday list for Auditee response due date/Auditee revised due date.
- 09:38 AM Usability #5026 (Closed): CM: ECR form-When clicking on the hyperlink provided in the project specific attachment it is displayed in the small window and maximizing the window does not displays the full screen.
- Verified by rem-ya and closing this issue
- 09:12 AM Bug #2710: Tracking Matrix:Clicking on View Report displays "Report processing error"
- SSRS limitation
03/09/2018
- 06:44 PM Usability #4411 (Closed): Select users (Grid pages) - Select the Topic checkbox on select user window and click refresh button. Here system removes the topic checkbox for one click and then the listing elements for another click.
- Closed in SP730 Cycle 7
- 06:41 PM Bug #4964 (Yet to Verify): Multilanguage- User Loggin - When changing the languages for a user, system is displaying alert in first selected language even after changing to other languages.
- Language is not converted yet.
- 06:40 PM Bug #5069 (Closed): Assign Department - Unable to assign department contact person. Page is loading for long time.
- Closed in SP730 Cycle 7
- 11:54 AM Bug #5069 (Resolved): Assign Department - Unable to assign department contact person. Page is loading for long time.
- 10:01 AM Bug #5069 (Open): Assign Department - Unable to assign department contact person. Page is loading for long time.
- 06:38 PM Bug #5070 (Closed): EFC Tree - Test instance Status colour is not displayed in EFC Tree
- Closed in SP730 Cycle 7.
- 12:14 PM Bug #5070 (Resolved): EFC Tree - Test instance Status colour is not displayed in EFC Tree
- 10:02 AM Bug #5070 (Open): EFC Tree - Test instance Status colour is not displayed in EFC Tree
- 06:38 PM Bug #4903 (Closed): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- Closed in SP730 Cycle 7
- 06:34 PM Bug #5054 (Closed): Admin can’t be able to add users in a route, the added users are not displayed and its functioning like module auto approval. Due to this cant able to verify publishing the documents with approval process.
- closed in cycle 7
- 06:17 PM Unit Level and Cosmetic Issues #4895 (Closed): IFM: In Function and Requirement pop up window, don't select Function/Requirement row click on Ctrl+Delete button alert pop up is displayed, click on enter alert pop up window is not getting closed
- Issue Closed.
- 05:58 PM Usability #4912 (Closed): Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- Issue Fixed and closed
- 05:47 PM Bug #4697 (Not Resolved): Form Sheets: In all the Inspection Forms, Right-Arrow is not working and not showing the Next Shift Form
- 05:47 PM Bug #4705 (Closed): Social Media with Themes: For the Orange Color Theme, User Menu Account was interfere in Dashboard Control Panel
- 05:46 PM Bug #4706 (Closed): Social Media with Themes: For the Orange Color Theme, All the Menus are listing with Underlines
- 05:39 PM Bug #4490: APQP: Draft status column displayed empty
- Reopening this issue in cycle 7 (3/9/2018).This seems to be behavioral issue.
For some times draft status is display... - 05:22 PM Bug #4724 (Closed): Control point displays no name in Sppc Ts sheet
- 05:21 PM Bug #5005 (Closed): Unexpected Popup message While Copy and Paste the Production items Which is created Either from RFD or FST
- 05:21 PM Bug #5065 (Closed): Replace is not working in Tables shows error
- 05:21 PM Bug #5064 (Closed): Find and replace is not working shows error
- 05:02 PM Bug #4837 (Closed): Themes: For Orange Theme, Receiving Inspection Menu is not working
- 04:56 PM Bug #5081 (Closed): Copy process or design segment which have existing data and paste the existing data Global PI process segment open it shows blank
- Copy process or design segment which have existing data and paste the existing data Global PI process segment open i...
- 04:55 PM Bug #4916 (Yet to Verify): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- Because of Language Pack not installed
- 12:05 PM Bug #4916 (Resolved): Chinese & Spanish Language: The Default Mail Content was Empty while viewing in the Out of Controls Grid, in the Customize Email Messages Menu
- 04:55 PM Bug #4973 (Yet to Verify): IC Settings: Cant able to Save the Edited/Updated Settings for Chinese/Spanish Languages
- Because of Language Pack not installed
- 04:51 PM Bug #5002 (Closed): Inspection Entry/Receiving Inspection: Cant able to continue the Final/Receiving Inspection
- 04:51 PM Bug #5014 (Closed): Part Equipment Mapping Menu: Cant able to Delete the Equipment Linkages(This Issue was coming for Multi Languages also)
- 04:50 PM Bug #4998 (Closed): Customize Email Messages: Out of Control Products was Duplicated as 3 and showing the same Rejection Mail Content in all the 3 Grids
- 04:30 PM Bug #5021 (Closed): Meetings -> KPI Snapshot Function is not working
- 04:18 PM Bug #4831 (Closed): In Competency evaluation menu, Shows unwanted tool tips near attach button and in Competency search page, near view shows empty tool tip.
- 10:23 AM Bug #4831 (Resolved): In Competency evaluation menu, Shows unwanted tool tips near attach button and in Competency search page, near view shows empty tool tip.
- 03:41 PM Bug #4918 (Closed): In Malfunction, in new row copy n paste the row of 1st malfunction then that ID is getting changed of 1st Mal row
- issue Closed
- 03:41 PM Bug #5035 (Closed): In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default internal element will be in checked, just uncheck and check the internal Element check box. Internal and External Element are getting checked
- Issue Closed
- 03:40 PM Bug #4880 (Not Resolved): FSR: There is no option to change the color for the Non Standard ASIL Values in the Matrix Cell Values
- The Reported Issue is fixed but there is an impact issue. In TSR the Fore ground color is not getting changed.
- 03:18 PM Unit Level and Cosmetic Issues #5020 (Closed): Meetings-> Dashboard-> Done button is not working
- 02:48 PM Unit Level and Cosmetic Issues #5022 (Closed): Proposal Rating -> Wrong alert message displayed when try to save without mandatory fields
- 02:24 PM Bug #4291 (Closed): Policy Attachments -> Attach From DocPro -> The latest revised document is not displayed
- Closed on 03-09-2018
03/08/2018
- 01:40 PM Bug #4431 (Closed): TBD:Position Based Route: When position has no User then it is displaying 0 in pending request
- Closing this issue in Cycle 7
When there are no users in the position, then in routes it wont display the position... - 01:08 PM Bug #4697 (Resolved): Form Sheets: In all the Inspection Forms, Right-Arrow is not working and not showing the Next Shift Form
- 12:59 PM Bug #5070 (Closed): EFC Tree - Test instance Status colour is not displayed in EFC Tree
- EFC Tree - Test instance Status colour is not displayed in EFC Tree
- 12:34 PM Bug #3773 (Closed): User list page- Search or refresh the page, column alignment is mismatching
- Closed in SP730 Cycle 7
- 12:33 PM Bug #5024 (Closed): Module Admin:Cant able to set the user as Primary Module Admin
- Closed in SP730 Cycle 7
- 12:27 PM Bug #4965 (Closed): User creation - Language Preferences in user creation page displays random data in the list.
- Closed in SP730 Cycle 7
- 12:14 PM Bug #4637 (Closed): Attachments that are attached anywhere from HR Pro is not getting displayed in Doc Pro levels.
- 11:57 AM Bug #5069 (Closed): Assign Department - Unable to assign department contact person. Page is loading for long time.
- Assign Department - Unable to assign department contact person. Page is loading for long time.
- 11:30 AM Bug #5058 (Closed): CM: ECR form - Part name is displayed as requested date.
- Issue got closed in SP730 cycle 7(New Site)
- 10:31 AM Bug #5058 (Resolved): CM: ECR form - Part name is displayed as requested date.
- 10:01 AM Bug #5058 (Open): CM: ECR form - Part name is displayed as requested date.
- 10:01 AM Bug #5068 (Open): APQP: Published charter page charter template form facing issue
- 09:50 AM Bug #5068 (Closed): APQP: Published charter page charter template form facing issue
- 1)Published charter page displays the some data fields with black highlighted color.
2)Published charter template fo... - 10:00 AM Bug #5053 (Open): Project summary report - Report does not display any data. Only data related to RISK are displayed
- 09:59 AM Bug #5064 (Open): Find and replace is not working shows error
- 09:59 AM Bug #5065 (Open): Replace is not working in Tables shows error
- 12:10 AM Usability #4840 (Closed): (Impact) : 8D form usability issues
03/07/2018
- 09:50 PM Bug #5065 (Closed): Replace is not working in Tables shows error
- Replace is not working in Tables shows error
Line: 3966 Error: 'DlgReplace' is undefined - 09:47 PM Bug #4831 (Not Resolved): In Competency evaluation menu, Shows unwanted tool tips near attach button and in Competency search page, near view shows empty tool tip.
- 09:27 PM Bug #5064 (Closed): Find and replace is not working shows error
- Find and replace is not working shows error
---------------------------
Message from webpage
-------------------... - 04:52 PM Bug #5018 (Closed): Tree diagrams - Collapsing the context arrow on header element is not collapsing test instance status alone
- Closed in SP730 Cycle 7
- 04:47 PM Bug #4904 (Closed): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- (Current Functionality)- Right click on tree diagram and scroll. System allows to scroll but cannot able to click any...
- 03:29 PM Bug #5058 (Closed): CM: ECR form - Part name is displayed as requested date.
- CM: ECR form - Part name is displayed as requested date.
- 03:19 PM Bug #4858 (Not Resolved): Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- < > is not handled in risk register and resource tracking and & is not handled in resource allocation report. ' " is ...
- 03:16 PM Bug #4492 (Future Release): Grid Issues - Grid is not unique throughout the modules. Following modules faces the same issue(Refer Description)
- 03:16 PM Bug #4492 (TBD): Grid Issues - Grid is not unique throughout the modules. Following modules faces the same issue(Refer Description)
- Need to handle in each modules As per Anilkumar on the cycle 6 - Moving to Sp750 Anilkumar
- 02:57 PM Bug #3196 (Closed): When forms are interchaged entered data does not gets saved
- 02:39 PM Bug #4105 (Closed): DVP&R - Date format is accepted as 01/01/2018. Does not accept 1/1/2018. system displays a grey colour status icon on VOC
- Closed in SP730 cycle 7
- 01:16 PM Bug #5054 (Open): Admin can’t be able to add users in a route, the added users are not displayed and its functioning like module auto approval. Due to this cant able to verify publishing the documents with approval process.
- 12:51 PM Bug #5054 (Closed): Admin can’t be able to add users in a route, the added users are not displayed and its functioning like module auto approval. Due to this cant able to verify publishing the documents with approval process.
- Admin can’t be able to add users in a route, the added users are not displayed and its functioning like module auto a...
- 12:50 PM Bug #5053 (Closed): Project summary report - Report does not display any data. Only data related to RISK are displayed
- 12:49 PM Bug #5052 (Open): In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side but clicking on “<” button hangs the system and then the user not able to perform any operations.
- QA Missed in the last cycles
- 12:03 PM Bug #5052 (Closed): In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side but clicking on “<” button hangs the system and then the user not able to perform any operations.
- In deploy From side, after moving single goal to Deploy to side and without selecting any records form deploy to side...
- 12:49 PM Bug #4751 (Yet to Verify): Reports:when reason for request is formatted, then in reports its showing with HTML tag
- 12:49 PM Bug #4431 (Yet to Verify): TBD:Position Based Route: When position has no User then it is displaying 0 in pending request
- 12:28 PM Bug #5025 (Closed): New changes : Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later (Refer screenshot)
- Closed in cycle 7 07-03-2018
- 12:25 PM Usability #4883 (Closed): SIte dropdown should shows the site based on the module site selection (Same in All screens across doc pro)
- Closed in Cycle 7
- 12:19 PM Bug #4291 (Resolved): Policy Attachments -> Attach From DocPro -> The latest revised document is not displayed
- Change in VMDPAttachPublish.js.
- 12:13 PM Bug #5013 (Not Resolved): Problem on holiday list for Auditee response due date/Auditee revised due date.
- 12:10 PM Bug #5001: New document request:Error occurs when clicking on Select Level button(only when there are no active levels in site, only for first time)
- Please select a site first message should come, but now its showing Select site
- 12:09 PM Bug #5001 (Closed): New document request:Error occurs when clicking on Select Level button(only when there are no active levels in site, only for first time)
- Closed in CYcle 7
- 11:42 AM Bug #5027 (Not Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 11:36 AM Bug #4724: Control point displays no name in Sppc Ts sheet
- I have verified this issue its working
- 11:32 AM Bug #3584 (Reopen): Yazaki: In Audit Program -> Audit Type mapping. if audit type name is having special character in it, while adding online form and clicking on add shows option to upload Files instead it should show Available checklist in the application
- 11:29 AM Usability #5008 (Closed): APQP : Routes page(Risk Setup) Please refer below description.
- 11:29 AM Usability #5008: APQP : Routes page(Risk Setup) Please refer below description.
- Issue got closed in SP730 CYCLE7.
- 10:50 AM Bug #4973 (Resolved): IC Settings: Cant able to Save the Edited/Updated Settings for Chinese/Spanish Languages
- 10:50 AM Bug #5011 (Future Release): Equipments: Cant able to Create the Equipments like Assembly, Machines and also the Equipment Types field was missing for the Existing Equipments for the both Languages
- Since the equipment page is going to change in TPM in the next build, this issue will handle along with TPM changes.
- 10:46 AM Bug #4998 (Resolved): Customize Email Messages: Out of Control Products was Duplicated as 3 and showing the same Rejection Mail Content in all the 3 Grids
- 10:45 AM Bug #5014 (Resolved): Part Equipment Mapping Menu: Cant able to Delete the Equipment Linkages(This Issue was coming for Multi Languages also)
- 09:50 AM Bug #4811 (Closed): CM: ECR form : Risk Form- Clicking on Responsibility person in the Risk form (View risk)User pop dialog displaced incorrectly
- Issue got closed in SP730 CYCLE7
03/06/2018
- 07:57 PM Bug #4858 (Resolved): Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- 05:21 PM Bug #4858 (In Progress): Reports - " & " entered anywhere in the APQP project is displayed as "&" in all the reports. Same has to be handled in the tooltip also
- 07:57 PM Bug #4716 (Resolved): Report : (Impact) project summary report: Project actual finish date is displayed when there is a deliverable which is not started and completed.
- 06:29 PM Usability #5008 (Resolved): APQP : Routes page(Risk Setup) Please refer below description.
- 05:36 PM Bug #4751 (Resolved): Reports:when reason for request is formatted, then in reports its showing with HTML tag
- 04:24 PM Bug #4751: Reports:when reason for request is formatted, then in reports its showing with HTML tag
- Will get back to make sure that thi can be fixed or not
- 05:18 PM Bug #4759 (Closed): Report: Burndown chart does not display the correct values on the graph for remaining and Actual task completed.
- wORKING AS EXPECTED AS PER THE DISCUSSION WITH sABU AND dEV TEAM ON 06/03/2018
- 04:49 PM Bug #4913 (Closed): Form Sheet: In all the Forms, the Saved Value is not display
- 04:38 PM Bug #3905 (Closed): CM: Allows to Initiate Change request for a project by the person who is not a member of that project.
- Closing this issue as per the Discussion on 06032018 with sabu and dev team
- 04:25 PM Bug #4291: Policy Attachments -> Attach From DocPro -> The latest revised document is not displayed
- get back when can be fixed
- 04:16 PM Bug #4637 (Resolved): Attachments that are attached anywhere from HR Pro is not getting displayed in Doc Pro levels.
- 04:15 PM Unit Level and Cosmetic Issues #3906: Problem solver setup → Problem classification : Sub category data should be displayed as dropdown menu
- this is the expected Functionality
- 04:15 PM Unit Level and Cosmetic Issues #3906 (Closed): Problem solver setup → Problem classification : Sub category data should be displayed as dropdown menu
- Closing this issue per the discussion on 06/03/2018 with Sabu and dev team
- 04:15 PM Unit Level and Cosmetic Issues #3906 (Resolved): Problem solver setup → Problem classification : Sub category data should be displayed as dropdown menu
- 04:15 PM Bug #4811 (Resolved): CM: ECR form : Risk Form- Clicking on Responsibility person in the Risk form (View risk)User pop dialog displaced incorrectly
- 02:52 PM Bug #4431 (Resolved): TBD:Position Based Route: When position has no User then it is displaying 0 in pending request
- 02:51 PM Usability #4883 (Resolved): SIte dropdown should shows the site based on the module site selection (Same in All screens across doc pro)
- 02:50 PM Bug #5001 (Resolved): New document request:Error occurs when clicking on Select Level button(only when there are no active levels in site, only for first time)
- 11:49 AM Bug #5002 (Resolved): Inspection Entry/Receiving Inspection: Cant able to continue the Final/Receiving Inspection
- 11:40 AM Bug #4873 (Closed): Social Media: In the My Dashboard for Worst Supplier Reports its showing wrongly
- 11:19 AM Bug #3196 (Resolved): When forms are interchaged entered data does not gets saved
- 11:19 AM Usability #4840 (Resolved): (Impact) : 8D form usability issues
- Comment 2 fixed by Radha Krishnan
- 11:18 AM Usability #4840 (In Progress): (Impact) : 8D form usability issues
- 10:54 AM Unit Level and Cosmetic Issues #5020 (Resolved): Meetings-> Dashboard-> Done button is not working
- Change in Index.cshtml file in Boss/view/dashboard.
- 10:52 AM Bug #5021 (Resolved): Meetings -> KPI Snapshot Function is not working
- Change in Newmeet.js and editmeet.js.
- 10:50 AM Unit Level and Cosmetic Issues #5022 (Resolved): Proposal Rating -> Wrong alert message displayed when try to save without mandatory fields
- Change in ProposalRating.js file.
- 09:28 AM Bug #5035 (Resolved): In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default internal element will be in checked, just uncheck and check the internal Element check box. Internal and External Element are getting checked
- 09:27 AM Bug #5035 (Open): In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default internal element will be in checked, just uncheck and check the internal Element check box. Internal and External Element are getting checked
03/05/2018
- 09:19 PM Bug #4904 (Resolved): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- 10:54 AM Bug #4904 (Not Resolved): Tree Diagrams - Right click on tree tables. System is allowing to scroll the page
- 08:46 PM Bug #5018 (Resolved): Tree diagrams - Collapsing the context arrow on header element is not collapsing test instance status alone
- 10:17 AM Bug #5018 (Open): Tree diagrams - Collapsing the context arrow on header element is not collapsing test instance status alone
- 08:46 PM Bug #4105 (Resolved): DVP&R - Date format is accepted as 01/01/2018. Does not accept 1/1/2018. system displays a grey colour status icon on VOC
- 08:45 PM Bug #4903 (Resolved): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- 01:24 PM Bug #4903 (In Progress): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- 12:56 PM Bug #4903 (Not Resolved): EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- 12:56 PM Bug #4903: EFC Tree - Clicking on the context arrow on EFC tree is removing the Violation table and displaying the same child table again and again
- Clicking on context arrow displays a error message.
- 07:17 PM Bug #5035 (Closed): In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default internal element will be in checked, just uncheck and check the internal Element check box. Internal and External Element are getting checked
- In Item Boundaries, Click on ADD/Remove Element and select all the Element,Component and Subcomponent. By default int...
- 06:39 PM Bug #4750: Reports:In all the reports date is shown as 2018 Feb 9.Before its showing as 9 Feb 2018
- After running the job, its working as per admin settings
- 01:00 PM Bug #4750 (Closed): Reports:In all the reports date is shown as 2018 Feb 9.Before its showing as 9 Feb 2018
- Whatever be the user preference date format, it should display the date format as dd-MMM-YYYY in reports
Closed in... - 06:25 PM Bug #5024 (Resolved): Module Admin:Cant able to set the user as Primary Module Admin
- 10:06 AM Bug #5024 (Open): Module Admin:Cant able to set the user as Primary Module Admin
- 06:24 PM Bug #3773 (Resolved): User list page- Search or refresh the page, column alignment is mismatching
- 06:24 PM Usability #4411 (Resolved): Select users (Grid pages) - Select the Topic checkbox on select user window and click refresh button. Here system removes the topic checkbox for one click and then the listing elements for another click.
- 06:13 PM Bug #4716 (In Progress): Report : (Impact) project summary report: Project actual finish date is displayed when there is a deliverable which is not started and completed.
- Moving to Inprogress as per the dev meeting as on Mar 032018
- 06:05 PM Bug #4751 (In Progress): Reports:when reason for request is formatted, then in reports its showing with HTML tag
- Moving to Inpprogress after the Dev meeting on March 05 2018
- 05:44 PM Unit Level and Cosmetic Issues #4696 (Closed): Reports ( Refer description)
- Closing this issue after the dev meeting on 05-feb-2018
- 05:39 PM Bug #4759: Report: Burndown chart does not display the correct values on the graph for remaining and Actual task completed.
- As Kochu statment confusing again reopen this issue
- 05:38 PM Bug #4759 (Reopen): Report: Burndown chart does not display the correct values on the graph for remaining and Actual task completed.
- 05:37 PM Bug #4759 (Closed): Report: Burndown chart does not display the correct values on the graph for remaining and Actual task completed.
- This seems to be an understanding issue and as per the discussion with Sabu on 05-feb-2018 this seems to be ok and h...
- 05:26 PM Bug #4863 (Closed): Publish for Approval - When publish by auto approval, system is displaying PDF document. But when publishing using approver, HTML document is displayed
- As per the discussion on 05 feb 2018( dev meeting) this issue is closing now as this is the expected behaviour.
- 05:12 PM Bug #4837 (Resolved): Themes: For Orange Theme, Receiving Inspection Menu is not working
- 05:11 PM Bug #4705 (Resolved): Social Media with Themes: For the Orange Color Theme, User Menu Account was interfere in Dashboard Control Panel
- 05:11 PM Bug #4706 (Resolved): Social Media with Themes: For the Orange Color Theme, All the Menus are listing with Underlines
- 04:09 PM Bug #4431 (In Progress): TBD:Position Based Route: When position has no User then it is displaying 0 in pending request
- 03:26 PM Bug #4831 (Resolved): In Competency evaluation menu, Shows unwanted tool tips near attach button and in Competency search page, near view shows empty tool tip.
- 03:20 PM Bug #5025 (Resolved): New changes : Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later (Refer screenshot)
- 03:19 PM Bug #5025 (In Progress): New changes : Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later (Refer screenshot)
- 10:15 AM Bug #5025 (Open): New changes : Not able to initiate concern from aqua pro displayed as Could not load template/form for the concern try again later (Refer screenshot)
- 03:15 PM Bug #4518 (Closed): Same Priority is duplicated when Copying priority to other Sub Category
- 12:58 PM Bug #4518 (Resolved): Same Priority is duplicated when Copying priority to other Sub Category
- Actual issue was resolved with some usability problem in GUI.
- 01:26 PM Bug #4197 (Closed): BOM - While creating a PI from BOM, PI creation window is not closing once the PI is created. So I can able to create same PI for multiple times
- 01:12 PM Usability #4912 (Resolved): Alignment issue in the following menu (Item Definition, HARA and FSR). Please refer screenshot. Also see the Comment
- 01:10 PM Unit Level and Cosmetic Issues #4895 (Resolved): IFM: In Function and Requirement pop up window, don't select Function/Requirement row click on Ctrl+Delete button alert pop up is displayed, click on enter alert pop up window is not getting closed
- 1. Discussed with Biju, cannot be done in current release so need to move to Future Release
2. File missed to update... - 01:01 PM Bug #5013 (Resolved): Problem on holiday list for Auditee response due date/Auditee revised due date.
- 01:01 PM Bug #5027 (Resolved): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 10:11 AM Bug #5027 (Open): Displays Error as "The linked document with this revision is not found" when Audit attachment's are attached - Issue open again while Batch process Enable
- 01:01 PM Bug #5023 (Resolved): Audit report publish window displays the wrong route to which the audit report is publish
- 01:01 PM Bug #5023 (In Progress): Audit report publish window displays the wrong route to which the audit report is publish
- 10:11 AM Bug #5023 (Open): Audit report publish window displays the wrong route to which the audit report is publish
- 12:17 PM Bug #4965 (Resolved): User creation - Language Preferences in user creation page displays random data in the list.
- 11:51 AM Bug #4713 (Closed): Report: Tracking matrix - start date and finish date column displayed with one additional numeric values.
- 11:09 AM Bug #4713 (Not Resolved): Report: Tracking matrix - start date and finish date column displayed with one additional numeric values.
- 11:50 AM Unit Level and Cosmetic Issues #4859 (Closed): Resource tracking - Task vs. Resource graph - Project desc label to be changed to Project name.
- 11:10 AM Unit Level and Cosmetic Issues #4859 (Not Resolved): Resource tracking - Task vs. Resource graph - Project desc label to be changed to Project name.
- 11:48 AM Unit Level and Cosmetic Issues #4860 (Closed): Reports - resource allocation - " project vs. no of unallocated tasks" to be changed "project vs. no of allocated tasks", since the graph is depicting the no. of allocated tasks for the resource.
- Closing this issue SP730 Cycle 6
- 11:14 AM Unit Level and Cosmetic Issues #4860 (Not Resolved): Reports - resource allocation - " project vs. no of unallocated tasks" to be changed "project vs. no of allocated tasks", since the graph is depicting the no. of allocated tasks for the resource.
- 11:26 AM Bug #4954 (Closed): (Sporadic) : Not able to view Concern details in Actions → Initiate Problem Solving displayed as "Sorry, an error occurred while processing your request"
- 11:23 AM Bug #2339 (Closed): Theme is inconsistent in Revision History Summary - Draft Details & Draft Comments page
- As per the discussion made with QA manager closing this issue in SP730 cycle 6
- 11:03 AM Unit Level and Cosmetic Issues #5022 (Open): Proposal Rating -> Wrong alert message displayed when try to save without mandatory fields
- 11:03 AM Bug #5021 (Open): Meetings -> KPI Snapshot Function is not working
- 11:03 AM Unit Level and Cosmetic Issues #5020 (Open): Meetings-> Dashboard-> Done button is not working
- 11:01 AM Bug #4838 (Closed): Report : Project summary - Clicking on the risk icon redirected to the risk register report does not display the risk details of the project.
- 10:14 AM Bug #5014 (Open): Part Equipment Mapping Menu: Cant able to Delete the Equipment Linkages(This Issue was coming for Multi Languages also)
- 10:02 AM Bug #5017 (Open): In Bulk publish :Not able to pick level in docpro level Selection
- 10:01 AM Usability #5026 (Open): CM: ECR form-When clicking on the hyperlink provided in the project specific attachment it is displayed in the small window and maximizing the window does not displays the full screen.
Also available in: Atom