Activity
From 09/10/2017 to 10/09/2017
10/09/2017
- 09:03 PM Bug #2968: LPA Reports :In LPA Plan VS Actual Report displays the status of deadline violated schedule.
- Not an issue
- 12:16 PM Bug #2968 (Open): LPA Reports :In LPA Plan VS Actual Report displays the status of deadline violated schedule.
- 09:55 AM Bug #2968 (Closed): LPA Reports :In LPA Plan VS Actual Report displays the status of deadline violated schedule.
- In LPA Plan VS Actual Report displays the status of deadline violated schedule.
but there is no deadline violated sc... - 08:08 PM Bug #2973: Multi Site: When clicked on Doc pro module does not displays Entity.
- Following the steps you specified I didn't find the issue.
Attached screen shot.
Please close the issue or prov... - 05:35 PM Bug #2973 (Open): Multi Site: When clicked on Doc pro module does not displays Entity.
- 03:34 PM Bug #2973 (Closed): Multi Site: When clicked on Doc pro module does not displays Entity.
- When clicked on Doc pro module does not displays Entity and even the levels in the doc pro displays blank.
- 07:32 PM Bug #2984 (Open): New: In LPA Plan Vs Actual report and Layer performance report, the checkpoint field in listing shows no checkpoint found, but checkpoints are there.
- 07:19 PM Bug #2984 (Closed): New: In LPA Plan Vs Actual report and Layer performance report, the checkpoint field in listing shows no checkpoint found, but checkpoints are there.
- In LPA Plan Vs Actual report, LPA findings report, and Layer performance report, the checkpoint field in listing show...
- 07:32 PM Bug #2983 (Open): New: In LPA Plan Vs Actual report and Layer performance report, the "Audit Completion date" column should be empty until unless it is completed.
- 07:00 PM Bug #2983 (Closed): New: In LPA Plan Vs Actual report and Layer performance report, the "Audit Completion date" column should be empty until unless it is completed.
- In LPA Plan Vs Actual report and Layer performance report, the "Audit Completion date" column should be empty until u...
- 07:32 PM Bug #2982 (Open): Multi site: LPA reports are displaying for the users by default (module admin,reupload approver,auditor,auditee,scheduler).
- 06:57 PM Bug #2982 (Closed): Multi site: LPA reports are displaying for the users by default (module admin,reupload approver,auditor,auditee,scheduler).
- LPA reports are displaying for the users by default (module admin,reupload approver,auditor,auditee,scheduler).
- 07:32 PM Bug #2979 (Open): New: In LPA Findings Report, the count in Equipment type Vs Findings has mis match while selecting multiple site in the filter
- 06:52 PM Bug #2979 (Closed): New: In LPA Findings Report, the count in Equipment type Vs Findings has mis match while selecting multiple site in the filter
- In LPA Findings Report, the count in Equipment type Vs Findings has mis match while selecting multiple site in the fi...
- 06:56 PM Bug #2981 (Closed): Label missing for Level integration report
- Label missing for Level integration report
- 06:54 PM Bug #2980 (Closed): Terminated Report:When the deletion request is terminated, then its not displayed in the report(Its not showing the terminated document after deletion request is terminated)
- Terminated Report:When the deletion request is terminated, then its not displayed in the report
- 06:36 PM Bug #2978 (Closed): Impact:Assign author→Users are not displayed
- Impact:Assign author→Users are not displayed
- 06:00 PM Bug #2935 (Fixed in Dev): FSR - After decomposing the child function, all the allocation for the elements are being removed
- 05:35 PM Bug #2969 (Open): Actual audit document is not able to publish in Month View Schedule is created For the Future Date
- 12:22 PM Bug #2969 (Closed): Actual audit document is not able to publish in Month View Schedule is created For the Future Date
- Actual audit document is not able to publish in Month View and in month view the Audit cycle displays as "Select" doe...
- 05:35 PM Bug #2975 (Open): Impact:NC Attachment is not viewable in Audit report Screen.
- 03:57 PM Bug #2975 (Closed): Impact:NC Attachment is not viewable in Audit report Screen.
- NC Attachment is not viewable in Audit report Screen which means it does not display the view button.
- 05:35 PM Bug #2974 (Open): New: In LPA findings report, the findings that are not yet approved are getting displayed, only approved findings need to be listed in reports (Like Audit Pro)
- 03:37 PM Bug #2974 (Closed): New: In LPA findings report, the findings that are not yet approved are getting displayed, only approved findings need to be listed in reports (Like Audit Pro)
- In LPA findings report, the findings that are not yet approved are getting displayed, only approved findings need to ...
- 05:35 PM Bug #2972 (Open): Close Button in NC Screen is not working.
- 02:58 PM Bug #2972 (Closed): Close Button in NC Screen is not working.
- Close Button in NC Screen is not working when clicked on close button the window is not getting closed.
- 05:35 PM Bug #2971 (Open): New: In LPA Plan Vs Actual report, LPA Findings Report and in Layer Performance Report, system shows data for deleted Equipment
- 12:59 PM Bug #2971 (Closed): New: In LPA Plan Vs Actual report, LPA Findings Report and in Layer Performance Report, system shows data for deleted Equipment
- In LPA Plan Vs Actual report, LPA Findings Report and in Layer Performance Report, system shows data for deleted Equi...
- 05:35 PM Bug #2970 (Open): New: in LPA Reports, While viewing for all the sites, there is some design issue in displaying the data.
- 12:45 PM Bug #2970 (Closed): New: in LPA Reports, While viewing for all the sites, there is some design issue in displaying the data.
- In LPA Reports, While viewing for all the sites, there is some design issue in displaying the data.
- 05:30 PM Bug #2966 (In Progress): Multi-Site: In LPA perform Audit, If the Auditor publishes the Audit report with Module auto approval route, its not getting published and alert shows like "Audit Report waiting for Approval"
- 12:16 PM Bug #2966 (Open): Multi-Site: In LPA perform Audit, If the Auditor publishes the Audit report with Module auto approval route, its not getting published and alert shows like "Audit Report waiting for Approval"
- 04:44 PM Bug #2977 (Closed): Label Issue in Widget Settings under Projects tab for Program
- Label Issue in Widget Settings under Projects tab for Program
- 04:39 PM Bug #2976 (Closed): Terminated Report:It shows the rejected document in report
- Terminated Report:It shows the rejected document in report
- 04:06 PM Bug #2965 (In Progress): Impact:In LPA when clicked on view button in NC Screen the back ground page is getting refreshed.
- 12:14 PM Bug #2965 (Open): Impact:In LPA when clicked on view button in NC Screen the back ground page is getting refreshed.
- 04:04 PM Bug #2949 (Fixed in Dev): Impact:LPA Schedule Production line Tool tip displays incorrect tool tip.
- 04:02 PM Bug #2963 (In Progress): Impact:In LPA View Button is displaying in Audit report Screen.
- 04:00 PM Bug #2963 (Fixed in Dev): Impact:In LPA View Button is displaying in Audit report Screen.
- 12:14 PM Bug #2963 (Open): Impact:In LPA View Button is displaying in Audit report Screen.
- 01:30 PM Bug #2964 (Open): FSR - While decomposing third level child function, following issues occur. (Refer attachment)
- 12:42 PM Bug #2960 (Fixed in Dev): Impact: In LPA, Once after giving No to he checkpoint, NC will be created automatically, in that NC the NC Category Dropdown is missing because of that Auditee response is Empty
- 12:13 PM Bug #2960 (Open): Impact: In LPA, Once after giving No to he checkpoint, NC will be created automatically, in that NC the NC Category Dropdown is missing because of that Auditee response is Empty
- 12:42 PM Bug #2959 (Fixed in Dev): Impact:Audit status Displays Server Error when clicked.
- 12:13 PM Bug #2959 (Open): Impact:Audit status Displays Server Error when clicked.
- 12:16 PM Bug #2967 (Open): New: In LPA, Plan Vs Actual Reports, the names mentioned in the legend is having Spelling mistakes.
- 12:13 PM Bug #2958 (Open): Impact: In Layer'sThe Mode which is selected is not displaying when clicked on Audit mode.
- 12:11 PM Bug #2956 (Open): LPA Reports: In LPA Plan VS Actual Reports Site VS no: of audits when clicked Reports are getting disappeared.
- 12:10 PM Bug #2955 (Open): Impact: In Equipment page, While mapping checklist, Adding 2 checklist adds only the first check list but not the second one.
- 11:54 AM Bug #2953 (Fixed in Dev): Impact: After Clicking on Save Template Doesnot show Validation Message
- 11:53 AM Bug #2951 (Fixed in Dev): Multi Site: In LPA Schedule, Equipment are not displaying after Modifying in "Equipment(s)".
- 11:11 AM Bug #2947 (Fixed in Dev): Multi site:LPA schedule is getting created for the next Year.
- 11:10 AM Bug #2945 (Fixed in Dev): Multi site: Not able to create New Assembly/New Machine in Equipments.
- 09:30 AM Bug #2611 (Fixed in Dev): LPA not able to copy template from the existing template.
10/06/2017
- 07:49 PM Bug #2936 (Fixed with Hotfix): IFM - After deleting a requirement column and again adding it, system does not accept the value for the first time.
- 12:38 PM Bug #2936 (Open): IFM - After deleting a requirement column and again adding it, system does not accept the value for the first time.
- 07:31 PM Bug #2961 (Fixed with Hotfix): FSR(From DFMEA)- Allocate a non Asil value to the From DFMEA on loading it removed the ASIL value from the Reqst ASIL field
- 03:58 PM Bug #2961 (Open): FSR(From DFMEA)- Allocate a non Asil value to the From DFMEA on loading it removed the ASIL value from the Reqst ASIL field
- 03:22 PM Bug #2961 (Closed): FSR(From DFMEA)- Allocate a non Asil value to the From DFMEA on loading it removed the ASIL value from the Reqst ASIL field
- FSR(From DFMEA)- Allocate a non Asil value to the From DFMEA on loading it removed the ASIL value from the Reqst ASIL...
- 06:22 PM Bug #2900 (Resolved): Meetings->Problem on creating new meeting with duplicate subject name
- Change in Meetingmanager controller method. added Userid.
- 06:16 PM Bug #2824 (Fixed with Hotfix): Block Diagram-Connect the interface with the source and destination arrow and change the interface type system gives the white space between the connection and the element
- 06:10 PM Bug #2967 (Closed): New: In LPA, Plan Vs Actual Reports, the names mentioned in the legend is having Spelling mistakes.
- In LPA, Plan Vs Actual Reports, the names mentioned in the legend is having Spelling mistakes.
- 05:54 PM Bug #2966 (Closed): Multi-Site: In LPA perform Audit, If the Auditor publishes the Audit report with Module auto approval route, its not getting published and alert shows like "Audit Report waiting for Approval"
- In LPA perform Audit, If the Auditor publishes the Audit report with Module auto approval route, its not getting publ...
- 05:44 PM Bug #2914 (Fixed with Hotfix): IFM- Add a Function / requirement and add a element to the topic here system deleted the added requirement automatically-couple of issue please find the description
- 05:41 PM Bug #2962 (Open): Full access status is not displayed for Single Page TOC in advanced search
- 04:32 PM Bug #2962 (Closed): Full access status is not displayed for Single Page TOC in advanced search
- Full access status is not displayed for Single Page TOC in advanced search
- 05:10 PM Bug #2965 (Closed): Impact:In LPA when clicked on view button in NC Screen the back ground page is getting refreshed.
- In LPA when clicked on view button in NC Screen the back ground page is getting refreshed.
expectation: when click... - 05:00 PM Bug #2964 (Closed): FSR - While decomposing third level child function, following issues occur. (Refer attachment)
- FSR - While decomposing third level child function, following issues occur. (Refer attachment)
- 04:59 PM Bug #2963 (Closed): Impact:In LPA View Button is displaying in Audit report Screen.
- When attachment is attached to one NC "View" is enabling to the remaining NC to which Attachments are not attached.
- 03:58 PM Bug #2957 (Open): TSR - Requirement Id is not available for the technical requirement
- 02:38 PM Bug #2957 (Closed): TSR - Requirement Id is not available for the technical requirement
- TSR - Requirement Id is not available for the technical requirement
- 03:44 PM Bug #2550 (Reopen): FSR Allocate the ASIL value to the element does not display the Higher value to the parent requirement refer sheet
- Issue reported in 700 it got Reopened in 710
- 03:35 PM Bug #2897 (Closed): FSR- Allocate a ASIL value to the element , the element flow down indication display topic element name as a VOC
- 03:15 PM Bug #2897 (Resolved): FSR- Allocate a ASIL value to the element , the element flow down indication display topic element name as a VOC
- 03:34 PM Bug #2765 (Closed): TSR- Allocate a Technical function to the element which has the ASIL value (A) and change the AISL value to (B) here system does not update with the new ASIL value
- 03:17 PM Bug #2908 (Closed): Ctrl+Insert- Need to restrict the insert New Row on Exposure, Controllability, Severity
- 03:15 PM Bug #2908 (Resolved): Ctrl+Insert- Need to restrict the insert New Row on Exposure, Controllability, Severity
- 03:17 PM Bug #2946 (Closed): IFM- System allow to delete the first row of the document also not able to create a new row
- 03:16 PM Bug #2946 (Resolved): IFM- System allow to delete the first row of the document also not able to create a new row
- 12:36 PM Bug #2946 (Open): IFM- System allow to delete the first row of the document also not able to create a new row
- 03:14 PM Bug #2960 (Closed): Impact: In LPA, Once after giving No to he checkpoint, NC will be created automatically, in that NC the NC Category Dropdown is missing because of that Auditee response is Empty
- Impact: In LPA, Once after giving No to he checkpoint, NC will be created automatically, in that NC the NC Category D...
- 02:59 PM Bug #2959 (Closed): Impact:Audit status Displays Server Error when clicked.
- Audit status Displays Server Error when clicked.
- 02:49 PM Bug #2958 (Closed): Impact: In Layer'sThe Mode which is selected is not displaying when clicked on Audit mode.
- In Layer's The Mode which is selected is not displaying when clicked on Audit mode before schedule is created with th...
- 02:35 PM Bug #2893 (Closed): TSR- Cant able to add multiple requirement for the element and the alignments are not proper
- 02:29 PM Bug #2956 (Closed): LPA Reports: In LPA Plan VS Actual Reports Site VS no: of audits when clicked Reports are getting disappeared.
- Reports are getting disappeared when clicked on Lpa Plan VS actual reports.
Note : The same is not working in Laye... - 02:28 PM Bug #2955 (Closed): Impact: In Equipment page, While mapping checklist, Adding 2 checklist adds only the first check list but not the second one.
- In Equipment page, While mapping checklist, Adding 2 checklist adds only the first check list but not the second one.
- 01:02 PM Bug #2611 (Reopen): LPA not able to copy template from the existing template.
- Closed in 700, Moving to 710 because it is Re opened now.
- 12:48 PM Bug #2953 (Open): Impact: After Clicking on Save Template Doesnot show Validation Message
- 12:42 PM Bug #2953 (Closed): Impact: After Clicking on Save Template Doesnot show Validation Message
- After Clicking on Save Template Does not show Validation Message as Saved Successfully but the saved template is disp...
- 12:48 PM Bug #2951 (Open): Multi Site: In LPA Schedule, Equipment are not displaying after Modifying in "Equipment(s)".
- 12:26 PM Bug #2951 (Closed): Multi Site: In LPA Schedule, Equipment are not displaying after Modifying in "Equipment(s)".
- Equipment's are not listing after modification.
- 12:43 PM Bug #2944 (Open): FSR - Allocation for the top level Parent safety goal is not displayed for corresponding safety goal.(Refer screenshot)
- 12:40 PM Bug #2935 (Open): FSR - After decomposing the child function, all the allocation for the elements are being removed
- 12:32 PM Bug #2948 (Open): FSR - Only one ASIL allocation for the element(First requirement) can be done for a function that has two or more requirement.
- 12:20 PM Bug #2949 (Open): Impact:LPA Schedule Production line Tool tip displays incorrect tool tip.
- 12:09 PM Bug #2949 (Closed): Impact:LPA Schedule Production line Tool tip displays incorrect tool tip.
- Checklist status Tool tip displays Incorrect data inside the tool tip when cursor is placed.
- 12:16 PM Bug #2937 (Open): Document is displayed in TOC even the document is rejected by the approver
- 12:15 PM Bug #2939 (Open): Alert message when the document number exists in the same level needs to be modified, due to this the user is allowed to request the document using same doc number which leads to Error
- 12:15 PM Bug #2940 (Open): Impact:Alert message label is missing when using same doc name across levels(Same in edit document of document management and New document draft)
10/05/2017
- 07:56 PM Bug #2947 (Open): Multi site:LPA schedule is getting created for the next Year.
- 06:06 PM Bug #2947 (Closed): Multi site:LPA schedule is getting created for the next Year.
- While Creating a lpa schedule for one full year Ex:2018 using weekly mode the schedule is getting created with same f...
- 07:56 PM Bug #2945 (Open): Multi site: Not able to create New Assembly/New Machine in Equipments.
- 05:32 PM Bug #2945 (Closed): Multi site: Not able to create New Assembly/New Machine in Equipments.
- System is not allowing to create "New Assembly" or "New Machine" for the user having rights to child site of other th...
- 07:56 PM Bug #2943 (Open): Multi site:Equipment type Images Duplication
- 05:17 PM Bug #2943 (Closed): Multi site:Equipment type Images Duplication
- While creating Equipment type by clicking on change image displays "images Duplication".
- 07:56 PM Bug #2942 (Open): Multi site:Problem on planned audit scheduled document
- 04:23 PM Bug #2942 (Closed): Multi site:Problem on planned audit scheduled document
- create a planned audit and publish the planned audit for approval using approver route and after publish click on act...
- 07:51 PM Bug #2911 (Closed): FSR- Define a Colour to the Non -ASIL value and allocate to the element for From DFMEA requirement and re lode the FSR system does not accept the defined color Refer Sheet
- 06:31 PM Bug #2912 (Closed): FSR - Do Add AISl and Add one more requirement to the function here system display the Safety Goal ASIL value instead of parent ASIL value
- 06:16 PM Bug #2919 (Closed): Item Boundaries - Able to edit Ref, Relationship, Comments columns. But system reverts the old data when giving blank value
- 06:16 PM Bug #2918 (Closed): HARA - Cannot able to add any Safety goal after deleting existing Safety goal.
- 06:14 PM Bug #2913 (Not Resolved): FSR - While decomposing the function more than three levels, Following issues occurs.(Refer Document)
- When decomposing to level 4 child, it resets all the allocations.
- 06:12 PM Bug #2948 (Closed): FSR - Only one ASIL allocation for the element(First requirement) can be done for a function that has two or more requirement.
- FSR - Only one ASIL allocation for the element(First requirement) can be done for a function that has two or more req...
- 06:10 PM Bug #2907 (Not Resolved): Control Insert-In most of the screen Ctrl + Insert Function is not working, please find the listed screens
- 1. Failure Mode- Ctrl+Insert- Not working
2.P diagram- Inserted row getting allocated to different cell
2. HardWare... - 06:06 PM Bug #2838 (Closed): Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its not accepting the value
- 06:05 PM Bug #2890 (Closed): Functional Analysis- Cant able to Delete the added Malfunction from the functional Analysis
- 05:59 PM Bug #2906 (Closed): Impact: In LPA Schedule page, After creating a schedule and confirming the whole audit as Administrator, for some of the weeks the tentative status is remains as Tentative and not getting changed to Confirm.
- closed in 710
- 05:55 PM Bug #2903 (Closed): Impact: In layers page,, after mapping Responsible person and audit mode and saving it, reopen the same layer shows some number in the Responsible person and Audit mode fields.
- closed in sp710
- 05:55 PM Bug #2909 (Closed): Item Boundaries- Add a element Type and Delete the element type from the Element Type from Master Table system system deletes entire
- 05:53 PM Bug #2914 (Not Resolved): IFM- Add a Function / requirement and add a element to the topic here system deleted the added requirement automatically-couple of issue please find the description
- Issue in the description not are not addresed
- 05:52 PM Bug #2896 (Closed): Multi-Site: In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.
- closed in710
- 05:48 PM Bug #2946 (Closed): IFM- System allow to delete the first row of the document also not able to create a new row
- IFM- System allow to delete the first row of the document also not able to create a new row without reloading the page
- 05:46 PM Bug #2894 (Closed): Multi-Site: In LPA, While mapping the Checklist to an equipment, the dropdown shows the checklist created in that site, it behaves as site based but it is not site specific
- Closed in 710
- 05:43 PM Bug #1916 (Reopen): DocPro: Published Documents was not displaying fully
- 05:40 PM Bug #2887 (Fixed in Dev): Multi-Site: Teams page is now working as common for all sites but it Should be site specific
- 05:39 PM Bug #2895 (Closed): Multi-Site: In LPA, while checklist mapping with equipment, the check points created in the checklist are not getting shown
- Closed in 710
- 05:18 PM Bug #2944 (Closed): FSR - Allocation for the top level Parent safety goal is not displayed for corresponding safety goal.(Refer screenshot)
- FSR - Allocation for the top level Parent safety goal is not displayed for corresponding safety goals.(Refer screensh...
- 05:13 PM Bug #2915 (Closed): IFM-(Impact) Cant able to add / Delete the function / Requirement at once , it make me to add / Delete a function / requirement multiple times this happen on using F2 key
- 05:08 PM Bug #2891 (Closed): Multi-Site: In Audit cycle page, the user belongs to the site other than Corporate, that user not able to create schedule for the site which is currently selected in Site drop down.
- Closed in 710
- 04:57 PM Bug #2916 (Closed): Operation Situation- The alert to enter Rational comments while giving E1/E2 is need to appear if user fails to enter comments, here the alert pops up on selecting the E value.
- 04:57 PM Bug #2917 (Closed): HARA- F2 function key is not working any of the column in the HARA , on clicking a junk value displaying
- 04:55 PM Bug #2824 (Not Resolved): Block Diagram-Connect the interface with the source and destination arrow and change the interface type system gives the white space between the connection and the element
- Once the Arrow source / Destination Arrow is given and reload. system doesn't saved the given arrow
- 04:31 PM Bug #2889 (Closed): Multi-Site: In Audit Cycle page, the scheduler is not having the rights for Corporate site, While Directly clicking on Add Actual Audit without creating planned audit, allows me to Schedule an audit for corporate site, but it should not allow
- Closed in 710
- 03:02 PM Bug #2940 (Closed): Impact:Alert message label is missing when using same doc name across levels(Same in edit document of document management and New document draft)
- Impact:Alert message label is missing when using same doc name within levels/across levels
- 02:56 PM Bug #2939 (Closed): Alert message when the document number exists in the same level needs to be modified, due to this the user is allowed to request the document using same doc number which leads to Error
- Alert message when the document number exists in the same level needs to be modified, due to this the user is allowed...
- 01:34 PM Bug #2881 (Closed): Cant able to view the documents in TOC .Error occurs when clicking on the levels in Documents menu
- Closed in cycle 2
- 10:26 AM Bug #2881 (Resolved): Cant able to view the documents in TOC .Error occurs when clicking on the levels in Documents menu
- 01:34 PM Bug #2910 (Closed): Error occurs when moving the document from aqua pro module level to other levels in doc pro.
- Closed in cycle 2
- 10:26 AM Bug #2910 (Resolved): Error occurs when moving the document from aqua pro module level to other levels in doc pro.
- 12:53 PM Bug #2899 (Closed): Impact:Alert message label is missing when using same doc number within levels/across levels
- 10:26 AM Bug #2899 (Resolved): Impact:Alert message label is missing when using same doc number within levels/across levels
- 12:12 PM Bug #2937 (Closed): Document is displayed in TOC even the document is rejected by the approver
- Document is displayed in TOC even the document is rejected by the approver
- 12:04 PM Bug #2936 (Closed): IFM - After deleting a requirement column and again adding it, system does not accept the value for the first time.
- IFM - After deleting a requirement column and again adding it, system does not accept the value for the first time.
... - 11:52 AM Bug #2935 (Closed): FSR - After decomposing the child function, all the allocation for the elements are being removed
- FSR - After decomposing the child function, all the allocation for the elements are being removed
- 11:24 AM Bug #2133 (Closed): Social Media Layout in IC Module: "JS Error" was Occured by Clicking on Equipment Menu
- 10:28 AM Bug #2885 (Closed): NEW:Corrective action close out of Auditor for NC/OFI is not displaying the verification details as expexted.
- 09:32 AM Bug #2886 (Closed): IMPACT:Problem on creating planned audit for a new audit cycle
10/04/2017
- 07:33 PM Bug #2681 (Closed): After reopening a concern from closed concern, Project status of the concern should be changed to active
- 02:57 PM Bug #2681: After reopening a concern from closed concern, Project status of the concern should be changed to active
- Moving from Sp700 to Cycle 2 Sp710
- 02:13 PM Bug #2681 (Resolved): After reopening a concern from closed concern, Project status of the concern should be changed to active
- 07:33 PM Bug #2684 (Closed): When a reopened concern is closed , able to update/modify details in Track project, 2 . In Is-Is not , 5whys , Possible cause forms add/delete functions are active
- 02:59 PM Bug #2684: When a reopened concern is closed , able to update/modify details in Track project, 2 . In Is-Is not , 5whys , Possible cause forms add/delete functions are active
- Moving from Sp700 to Cycle 2 Sp710
- 02:13 PM Bug #2684 (Resolved): When a reopened concern is closed , able to update/modify details in Track project, 2 . In Is-Is not , 5whys , Possible cause forms add/delete functions are active
- 06:53 PM Bug #2680 (Closed): When forms are selected and published from problem solver, a stiched document entry is created automatically in show document download list
- 05:03 PM Bug #2680 (Resolved): When forms are selected and published from problem solver, a stiched document entry is created automatically in show document download list
- 06:53 PM Bug #2852 (Closed): Include Concern details form has to be disabled after publish , as the document is waiting for approval/ conversion
- 05:03 PM Bug #2852 (Resolved): Include Concern details form has to be disabled after publish , as the document is waiting for approval/ conversion
- 05:28 PM Bug #2133 (Resolved): Social Media Layout in IC Module: "JS Error" was Occured by Clicking on Equipment Menu
- 05:11 PM Bug #2489 (Resolved): Alignment Chart-> Risk and Opportunity Form-> Problem on Risk calculation
- 05:08 PM Bug #2893 (Resolved): TSR- Cant able to add multiple requirement for the element and the alignments are not proper
- 05:08 PM Bug #2824 (Resolved): Block Diagram-Connect the interface with the source and destination arrow and change the interface type system gives the white space between the connection and the element
- 05:08 PM Bug #2765 (Resolved): TSR- Allocate a Technical function to the element which has the ASIL value (A) and change the AISL value to (B) here system does not update with the new ASIL value
- 05:08 PM Bug #2838 (Resolved): Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its not accepting the value
- 05:08 PM Bug #2890 (Resolved): Functional Analysis- Cant able to Delete the added Malfunction from the functional Analysis
- 05:07 PM Bug #2907 (Resolved): Control Insert-In most of the screen Ctrl + Insert Function is not working, please find the listed screens
- 05:07 PM Bug #2909 (Resolved): Item Boundaries- Add a element Type and Delete the element type from the Element Type from Master Table system system deletes entire
- 05:07 PM Bug #2911 (Resolved): FSR- Define a Colour to the Non -ASIL value and allocate to the element for From DFMEA requirement and re lode the FSR system does not accept the defined color Refer Sheet
- 05:07 PM Bug #2912 (Resolved): FSR - Do Add AISl and Add one more requirement to the function here system display the Safety Goal ASIL value instead of parent ASIL value
- 05:07 PM Bug #2913 (Resolved): FSR - While decomposing the function more than three levels, Following issues occurs.(Refer Document)
- 05:07 PM Bug #2914 (Resolved): IFM- Add a Function / requirement and add a element to the topic here system deleted the added requirement automatically-couple of issue please find the description
- 05:06 PM Bug #2915 (Resolved): IFM-(Impact) Cant able to add / Delete the function / Requirement at once , it make me to add / Delete a function / requirement multiple times this happen on using F2 key
- 05:06 PM Bug #2916 (Resolved): Operation Situation- The alert to enter Rational comments while giving E1/E2 is need to appear if user fails to enter comments, here the alert pops up on selecting the E value.
- 05:06 PM Bug #2917 (Resolved): HARA- F2 function key is not working any of the column in the HARA , on clicking a junk value displaying
- 05:06 PM Bug #2918 (Resolved): HARA - Cannot able to add any Safety goal after deleting existing Safety goal.
- 04:57 PM Bug #2918 (Open): HARA - Cannot able to add any Safety goal after deleting existing Safety goal.
- 05:06 PM Bug #2919 (Resolved): Item Boundaries - Able to edit Ref, Relationship, Comments columns. But system reverts the old data when giving blank value
- 04:57 PM Bug #2919 (Open): Item Boundaries - Able to edit Ref, Relationship, Comments columns. But system reverts the old data when giving blank value
- 04:57 PM Bug #2920 (Open): Impact:Audit is not listing in corrective actions page of auditee.
- 04:57 PM Bug #2900 (Open): Meetings->Problem on creating new meeting with duplicate subject name
- 04:21 PM Bug #2885 (Resolved): NEW:Corrective action close out of Auditor for NC/OFI is not displaying the verification details as expexted.
- 04:20 PM Bug #2906 (Resolved): Impact: In LPA Schedule page, After creating a schedule and confirming the whole audit as Administrator, for some of the weeks the tentative status is remains as Tentative and not getting changed to Confirm.
- 12:04 PM Bug #2906 (Fixed with Hotfix): Impact: In LPA Schedule page, After creating a schedule and confirming the whole audit as Administrator, for some of the weeks the tentative status is remains as Tentative and not getting changed to Confirm.
- 04:20 PM Bug #2903 (Resolved): Impact: In layers page,, after mapping Responsible person and audit mode and saving it, reopen the same layer shows some number in the Responsible person and Audit mode fields.
- 12:04 PM Bug #2903 (Fixed with Hotfix): Impact: In layers page,, after mapping Responsible person and audit mode and saving it, reopen the same layer shows some number in the Responsible person and Audit mode fields.
- 04:20 PM Bug #2896 (Resolved): Multi-Site: In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.
- 04:20 PM Bug #2895 (Resolved): Multi-Site: In LPA, while checklist mapping with equipment, the check points created in the checklist are not getting shown
- 12:04 PM Bug #2895 (Fixed with Hotfix): Multi-Site: In LPA, while checklist mapping with equipment, the check points created in the checklist are not getting shown
- 04:20 PM Bug #2894 (Resolved): Multi-Site: In LPA, While mapping the Checklist to an equipment, the dropdown shows the checklist created in that site, it behaves as site based but it is not site specific
- 12:04 PM Bug #2894 (Fixed with Hotfix): Multi-Site: In LPA, While mapping the Checklist to an equipment, the dropdown shows the checklist created in that site, it behaves as site based but it is not site specific
- 04:20 PM Bug #2891 (Resolved): Multi-Site: In Audit cycle page, the user belongs to the site other than Corporate, that user not able to create schedule for the site which is currently selected in Site drop down.
- 04:20 PM Bug #2889 (Resolved): Multi-Site: In Audit Cycle page, the scheduler is not having the rights for Corporate site, While Directly clicking on Add Actual Audit without creating planned audit, allows me to Schedule an audit for corporate site, but it should not allow
- 12:04 PM Bug #2889 (Fixed with Hotfix): Multi-Site: In Audit Cycle page, the scheduler is not having the rights for Corporate site, While Directly clicking on Add Actual Audit without creating planned audit, allows me to Schedule an audit for corporate site, but it should not allow
- 04:20 PM Bug #2886 (Resolved): IMPACT:Problem on creating planned audit for a new audit cycle
- 04:19 PM Bug #2888 (Fixed in Dev): New: In audit program Map entity page, while selecting an entity the Primary contact person set in Entity Page will default mapped here as primary contact person but the Check box colour is not changed to blue, remains as yellow itself
- 04:18 PM Bug #2898 (Fixed in Dev): IMPACT:Actual audit document is not able to publish in month view
- 04:00 PM Bug #2921 (Closed): Entity creation - System is allowing to create child entity with the same name as parent name.
- 03:02 PM Bug #2921 (Resolved): Entity creation - System is allowing to create child entity with the same name as parent name.
- 02:52 PM Bug #2921 (Open): Entity creation - System is allowing to create child entity with the same name as parent name.
- 03:31 PM Bug #2882 (Closed): Administrator settings- System is displaying Server error
- 02:52 PM Bug #2922 (Open): Administrator Settings - Changes done in First Day of week, First week of year and Name format rows are not working as expected.
- 02:52 PM Bug #2910 (Open): Error occurs when moving the document from aqua pro module level to other levels in doc pro.
- 02:52 PM Bug #2899 (Open): Impact:Alert message label is missing when using same doc number within levels/across levels
- 02:52 PM Bug #2881 (Open): Cant able to view the documents in TOC .Error occurs when clicking on the levels in Documents menu
10/03/2017
- 04:36 PM Bug #2885 (Fixed in Dev): NEW:Corrective action close out of Auditor for NC/OFI is not displaying the verification details as expexted.
- 02:52 PM Bug #2767 (Closed): Social Media in IC Module(Reports) : Clear Reports Functionality is not working in Dashboard nearby Activities option
- 02:21 PM Bug #2922 (Closed): Administrator Settings - Changes done in First Day of week, First week of year and Name format rows are not working as expected.
- Administrator Settings - Changes done in First Day of week, First week of year and Name format rows are not working ...
- 02:14 PM Bug #2915 (Fixed with Hotfix): IFM-(Impact) Cant able to add / Delete the function / Requirement at once , it make me to add / Delete a function / requirement multiple times this happen on using F2 key
- 01:58 PM Bug #2921 (Closed): Entity creation - System is allowing to create child entity with the same name as parent name.
- Entity creation - System is allowing to create child entity with the same name as parent name.
- 12:29 PM Bug #2920 (Closed): Impact:Audit is not listing in corrective actions page of auditee.
- Audit is not listing in corrective actions page of auditee.
Note: the audit is listing when searched in audit prog... - 12:09 PM Bug #2680 (Fixed with Hotfix): When forms are selected and published from problem solver, a stiched document entry is created automatically in show document download list
- 12:09 PM Bug #2852 (Fixed with Hotfix): Include Concern details form has to be disabled after publish , as the document is waiting for approval/ conversion
- 11:56 AM Bug #2889 (Fixed in Dev): Multi-Site: In Audit Cycle page, the scheduler is not having the rights for Corporate site, While Directly clicking on Add Actual Audit without creating planned audit, allows me to Schedule an audit for corporate site, but it should not allow
- 10:49 AM Bug #2903 (Fixed in Dev): Impact: In layers page,, after mapping Responsible person and audit mode and saving it, reopen the same layer shows some number in the Responsible person and Audit mode fields.
10/02/2017
- 05:16 PM Bug #2912 (Fixed with Hotfix): FSR - Do Add AISl and Add one more requirement to the function here system display the Safety Goal ASIL value instead of parent ASIL value
- 05:05 PM Bug #2913 (Fixed with Hotfix): FSR - While decomposing the function more than three levels, Following issues occurs.(Refer Document)
- 03:57 PM Bug #2917 (Fixed with Hotfix): HARA- F2 function key is not working any of the column in the HARA , on clicking a junk value displaying
- 02:32 PM Bug #2907 (Fixed with Hotfix): Control Insert-In most of the screen Ctrl + Insert Function is not working, please find the listed screens
10/01/2017
- 09:44 AM Bug #2908 (Fixed in Dev): Ctrl+Insert- Need to restrict the insert New Row on Exposure, Controllability, Severity
- 09:43 AM Bug #2897 (Fixed in Dev): FSR- Allocate a ASIL value to the element , the element flow down indication display topic element name as a VOC
09/28/2017
- 02:58 PM Bug #2919 (Closed): Item Boundaries - Able to edit Ref, Relationship, Comments columns. But system reverts the old data when giving blank value
- Item Boundaries - Able to edit Ref, Relationship, Comments columns. But system reverts the old data when giving blan...
- 02:50 PM Bug #2918 (Closed): HARA - Cannot able to add any Safety goal after deleting existing Safety goal.
- HARA - Cannot able to add any Safety goal after deleting existing Safety goal.
- 02:42 PM Bug #2767 (Reopen): Social Media in IC Module(Reports) : Clear Reports Functionality is not working in Dashboard nearby Activities option
- This Issue was Reopens because I set the Saved Report as Default for all and Reject Ratio was Clearing but Worst Supp...
- 02:40 PM Bug #2894 (Fixed in Dev): Multi-Site: In LPA, While mapping the Checklist to an equipment, the dropdown shows the checklist created in that site, it behaves as site based but it is not site specific
- 01:58 PM Bug #2916 (Fixed with Hotfix): Operation Situation- The alert to enter Rational comments while giving E1/E2 is need to appear if user fails to enter comments, here the alert pops up on selecting the E value.
- Not and Issues
- 01:04 PM Bug #2916 (Open): Operation Situation- The alert to enter Rational comments while giving E1/E2 is need to appear if user fails to enter comments, here the alert pops up on selecting the E value.
- 11:48 AM Bug #2916 (Closed): Operation Situation- The alert to enter Rational comments while giving E1/E2 is need to appear if user fails to enter comments, here the alert pops up on selecting the E value.
- Operation Situation- The alert to enter Rational comments while giving E1/E2 is need to appear if user fails to enter...
- 01:06 PM Bug #2890 (Fixed with Hotfix): Functional Analysis- Cant able to Delete the added Malfunction from the functional Analysis
- 01:04 PM Bug #2890 (Open): Functional Analysis- Cant able to Delete the added Malfunction from the functional Analysis
- 01:06 PM Bug #2909 (Fixed with Hotfix): Item Boundaries- Add a element Type and Delete the element type from the Element Type from Master Table system system deletes entire
- 01:04 PM Bug #2909 (Open): Item Boundaries- Add a element Type and Delete the element type from the Element Type from Master Table system system deletes entire
- 01:05 PM Bug #2911 (Fixed with Hotfix): FSR- Define a Colour to the Non -ASIL value and allocate to the element for From DFMEA requirement and re lode the FSR system does not accept the defined color Refer Sheet
- 01:04 PM Bug #2911 (Open): FSR- Define a Colour to the Non -ASIL value and allocate to the element for From DFMEA requirement and re lode the FSR system does not accept the defined color Refer Sheet
- 01:05 PM Bug #2914 (Fixed with Hotfix): IFM- Add a Function / requirement and add a element to the topic here system deleted the added requirement automatically-couple of issue please find the description
- 01:04 PM Bug #2914 (Open): IFM- Add a Function / requirement and add a element to the topic here system deleted the added requirement automatically-couple of issue please find the description
- 11:30 AM Bug #2914 (Closed): IFM- Add a Function / requirement and add a element to the topic here system deleted the added requirement automatically-couple of issue please find the description
- IFM- Add a Function / requirement and add a element to the topic here system deleted the added requirement automatica...
- 01:04 PM Bug #2917 (Open): HARA- F2 function key is not working any of the column in the HARA , on clicking a junk value displaying
- 11:54 AM Bug #2917 (Closed): HARA- F2 function key is not working any of the column in the HARA , on clicking a junk value displaying
- HARA- F2 function key is not working any of the column in the HARA , on clicking a junk value displaying
- 01:04 PM Bug #2915 (Open): IFM-(Impact) Cant able to add / Delete the function / Requirement at once , it make me to add / Delete a function / requirement multiple times this happen on using F2 key
- 11:35 AM Bug #2915 (Closed): IFM-(Impact) Cant able to add / Delete the function / Requirement at once , it make me to add / Delete a function / requirement multiple times this happen on using F2 key
- IFM-(Impact) Cant able to add / Delete the function / Requirement at once , it make me to add a function / requiremen...
- 01:04 PM Bug #2913 (Open): FSR - While decomposing the function more than three levels, Following issues occurs.(Refer Document)
- 01:04 PM Bug #2912 (Open): FSR - Do Add AISl and Add one more requirement to the function here system display the Safety Goal ASIL value instead of parent ASIL value
- 01:04 PM Bug #2908 (Open): Ctrl+Insert- Need to restrict the insert New Row on Exposure, Controllability, Severity
- 01:04 PM Bug #2907 (Open): Control Insert-In most of the screen Ctrl + Insert Function is not working, please find the listed screens
- 11:37 AM Bug #2907: Control Insert-In most of the screen Ctrl + Insert Function is not working, please find the listed screens
- Keerthi Vasan wrote:
> 1. Element Types
> 2. P- Diagram
> 3. Interface Types
> 4. Malfunctions
> 5. Failure Mode... - 01:04 PM Bug #2897 (Open): FSR- Allocate a ASIL value to the element , the element flow down indication display topic element name as a VOC
- 01:04 PM Bug #2893 (Open): TSR- Cant able to add multiple requirement for the element and the alignments are not proper
09/27/2017
- 07:40 PM Bug #2531 (Closed): In Auditee availability confirmation not able to expand any tab.
- issue is fixed SP710
- 07:38 PM Bug #2591 (Closed): Corrective actions Status Alignment Issue and displays JS Error on some Fields.
- issue is fixed in Sp710
- 07:34 PM Bug #2673 (Closed): View Previous CAR in auditor Page Search is not Working As Expected.
- issue is fixed in Sp710
- 06:43 PM Bug #2913 (Closed): FSR - While decomposing the function more than three levels, Following issues occurs.(Refer Document)
- FSR - While decomposing the function more than three levels, Following issues occurs. (Kindly contact if needed)
1. ... - 06:30 PM Bug #2838 (Fixed with Hotfix): Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its not accepting the value
- 06:25 PM Bug #2886 (Fixed with Hotfix): IMPACT:Problem on creating planned audit for a new audit cycle
- 12:16 PM Bug #2886 (Open): IMPACT:Problem on creating planned audit for a new audit cycle
- 06:23 PM Bug #2906 (Fixed in Dev): Impact: In LPA Schedule page, After creating a schedule and confirming the whole audit as Administrator, for some of the weeks the tentative status is remains as Tentative and not getting changed to Confirm.
- 12:16 PM Bug #2906 (Open): Impact: In LPA Schedule page, After creating a schedule and confirming the whole audit as Administrator, for some of the weeks the tentative status is remains as Tentative and not getting changed to Confirm.
- 11:53 AM Bug #2906 (Closed): Impact: In LPA Schedule page, After creating a schedule and confirming the whole audit as Administrator, for some of the weeks the tentative status is remains as Tentative and not getting changed to Confirm.
- In LPA Schedule page, After creating a schedule and confirming the whole audit as Administrator, for some of the week...
- 06:13 PM Bug #2800 (Closed): TSR- Element allocated with the ASIL value is not displaying in the TSR document
- 06:09 PM Bug #2884 (Closed): Iten Boundaries- Inner child element shows uncheck in item boundaries where the element is dragged out from the scope box and again add them into the scope box
- 06:08 PM Bug #2323 (Closed): Social Media Layout in IC Module: Equipment Menu was keep on Loading and Can't able to Create a Equipments
- 05:43 PM Bug #2895 (Fixed in Dev): Multi-Site: In LPA, while checklist mapping with equipment, the check points created in the checklist are not getting shown
- 12:16 PM Bug #2895 (Open): Multi-Site: In LPA, while checklist mapping with equipment, the check points created in the checklist are not getting shown
- 04:46 PM Bug #2133 (Fixed with Hotfix): Social Media Layout in IC Module: "JS Error" was Occured by Clicking on Equipment Menu
- 10:33 AM Bug #2133 (Not Resolved): Social Media Layout in IC Module: "JS Error" was Occured by Clicking on Equipment Menu
- 04:41 PM Bug #2764 (Closed): Administrator setting - Page is displaying random data where system is displaying all default settings.(Refer Description)
- 11:02 AM Bug #2764 (Yet to Verify): Administrator setting - Page is displaying random data where system is displaying all default settings.(Refer Description)
- Since Administrator settings page displays a server error, I could not able to verify the issue.
- 04:41 PM Bug #2891 (Fixed with Hotfix): Multi-Site: In Audit cycle page, the user belongs to the site other than Corporate, that user not able to create schedule for the site which is currently selected in Site drop down.
- 12:48 PM Bug #2891 (Fixed in Dev): Multi-Site: In Audit cycle page, the user belongs to the site other than Corporate, that user not able to create schedule for the site which is currently selected in Site drop down.
- 12:16 PM Bug #2891 (Open): Multi-Site: In Audit cycle page, the user belongs to the site other than Corporate, that user not able to create schedule for the site which is currently selected in Site drop down.
- 04:40 PM Bug #2896 (Fixed with Hotfix): Multi-Site: In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.
- 12:50 PM Bug #2896 (Fixed in Dev): Multi-Site: In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.
- LPA Schedule Can Be done only after assigning Shifts to users. It Is not a ShowStopper(once shifts are assigned you c...
- 12:16 PM Bug #2896 (Open): Multi-Site: In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.
- 03:51 PM Bug #2912 (Closed): FSR - Do Add AISl and Add one more requirement to the function here system display the Safety Goal ASIL value instead of parent ASIL value
- FSR - Do Add AISl and Add one more requirement to the function here system display the Safety Goal ASIL value instea...
- 03:07 PM Bug #2911 (Closed): FSR- Define a Colour to the Non -ASIL value and allocate to the element for From DFMEA requirement and re lode the FSR system does not accept the defined color Refer Sheet
- FSR- Define a Colour to the Non -ASIL value and allocate to the element for From DFMEA requirement and re lode the FS...
- 02:46 PM Bug #1401 (Closed): Multidate (yyyy/mm/dd) : In 7D concern form , due date format is not displayed as per user preference Server date : (yyyy/mm/dd)
- 02:15 PM Bug #2694 (Closed): In find and replace : when replacing invalid data in Target date column the Alert message is not valid
- This Issue was Verified & Closing in SP710.
- 02:12 PM Bug #2910 (Closed): Error occurs when moving the document from aqua pro module level to other levels in doc pro.
- Error occurs when moving the document from aqua pro module level to other levels in doc pro.
- 02:11 PM Bug #1503 (Closed): Issue With Work Instructions - There is no Scroll bar in WIS document while having large set of data
- This Issue was Verified & Closing in SP710.
- 02:09 PM Bug #2909 (Closed): Item Boundaries- Add a element Type and Delete the element type from the Element Type from Master Table system system deletes entire
- Item Boundaries- Add a element Type and Delete the element type from the Element Type Master Table system deletes ent...
- 01:49 PM Bug #2882 (Resolved): Administrator settings- System is displaying Server error
- 12:56 PM Bug #2097 (Closed): In Aqua pro :publish document in different level with approver and terminate document that document ,Again go back and publish same document in different level
- This Issue was Verified and Closing in SP710.
- 12:47 PM Bug #2908 (Closed): Ctrl+Insert- Need to restrict the insert New Row on Exposure, Controllability, Severity
- Ctrl+Insert- Need to restrict the insert New Row on Exposure, Controllability, Severity
- 12:45 PM Bug #2907 (Closed): Control Insert-In most of the screen Ctrl + Insert Function is not working, please find the listed screens
- 1. Element Types
2. P- Diagram
3. Interface Types
4. Malfunctions
5. Failure Modes
6. Operation Situation
7. Sa... - 12:45 PM Bug #2784 (Closed): In Aquapro -Published document is waiting for Approver but it allows user to publish document again.
- This Issue was Verified & Closing in SP710
- 12:16 PM Bug #2903 (Open): Impact: In layers page,, after mapping Responsible person and audit mode and saving it, reopen the same layer shows some number in the Responsible person and Audit mode fields.
- 11:21 AM Bug #2903 (Closed): Impact: In layers page,, after mapping Responsible person and audit mode and saving it, reopen the same layer shows some number in the Responsible person and Audit mode fields.
- In layers page,, after mapping Responsible person and audit mode and saving it, reopen the same layer shows some numb...
- 12:16 PM Bug #2898 (Open): IMPACT:Actual audit document is not able to publish in month view
- 12:16 PM Bug #2894 (Open): Multi-Site: In LPA, While mapping the Checklist to an equipment, the dropdown shows the checklist created in that site, it behaves as site based but it is not site specific
- 12:16 PM Bug #2889 (Open): Multi-Site: In Audit Cycle page, the scheduler is not having the rights for Corporate site, While Directly clicking on Add Actual Audit without creating planned audit, allows me to Schedule an audit for corporate site, but it should not allow
- 12:16 PM Bug #2888 (Open): New: In audit program Map entity page, while selecting an entity the Primary contact person set in Entity Page will default mapped here as primary contact person but the Check box colour is not changed to blue, remains as yellow itself
- 12:16 PM Bug #2887 (Open): Multi-Site: Teams page is now working as common for all sites but it Should be site specific
- 12:16 PM Bug #2885 (Open): NEW:Corrective action close out of Auditor for NC/OFI is not displaying the verification details as expexted.
- 12:02 PM Bug #2765 (Fixed with Hotfix): TSR- Allocate a Technical function to the element which has the ASIL value (A) and change the AISL value to (B) here system does not update with the new ASIL value
- 10:55 AM Bug #1703 (Closed): SQL2016: In Social Media, When Clicking the Dashboard it Displays a Blank Page.
- 10:53 AM Bug #2651 (Closed): Reports: By Clicking on the Bar Chart it showing as "The 'SupplierID' parameter is missing a value"
- This Issue was closed in SP710.
- 10:48 AM Bug #2767 (Closed): Social Media in IC Module(Reports) : Clear Reports Functionality is not working in Dashboard nearby Activities option
- This Issue was closed in SP710.
- 10:40 AM Bug #2699 (Closed): Reports: Saved Reports was not Loading Automatically and not Showing the Details for both the Normal & Social Media Layouts
- This Issue was closed in SP710.
- 10:40 AM Bug #2701 (Closed): Reports: Update Reports is not Working for both the Normal & Social Media Layout
- This Issue was closed in SP710.
- 10:38 AM Bug #2713 (Closed): Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for YYYY/MM/DD Format
- It seems this Issue was related to the Reorg and the Form and its not an issue so we closing this in SP710.
- 10:38 AM Bug #2716 (Closed): Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for DD/MM/YYYY Format
- It seems this Issue was related to the Reorg and the Form and its not an issue so we closing this in SP710.
- 10:36 AM Bug #2692 (Closed): Receiving Inspection & Production TrackingSheet Menu: Change Part Option was not Working
- This Issue was closed in SP710.
- 10:36 AM Bug #2592 (Closed): Social Media Layout in IC Module: "JS Error" was Occurring for both the Receiving Inspection/Production TrackingSheet Menu by Clicking on the Receiving Inspection near the Home Button
- This Issue was closed in SP710.
- 10:35 AM Bug #2206 (Closed): Production Scheduling Menu: Placement of the OK Button for the Production Item, Shift Pop-Ups
- This Issue was closed in SP710.
- 10:31 AM Bug #1916 (Closed): DocPro: Published Documents was not displaying fully
- This Issue was closed in SP710.
09/26/2017
- 09:29 PM Bug #2489 (Not Resolved): Alignment Chart-> Risk and Opportunity Form-> Problem on Risk calculation
- 09:06 PM Bug #2489: Alignment Chart-> Risk and Opportunity Form-> Problem on Risk calculation
- Moving from SP700
- 08:58 PM Bug #2900 (Closed): Meetings->Problem on creating new meeting with duplicate subject name
- Meetings->The system is not displaying newly created meeting in listing page in following scenario.
Step->1 Create... - 08:29 PM Bug #2670 (Closed): Problem on Document View in DocPro (Both Website and Virtual Directory - Application Type)
- 01:31 PM Bug #2670 (Resolved): Problem on Document View in DocPro (Both Website and Virtual Directory - Application Type)
- Moving from SP700
- 07:59 PM Bug #2353 (Closed): Meetings(Modify Right)->Problem on Viewing Meetings list by user provided the user is having only Meetings-Modifty access right
- 01:31 PM Bug #2353 (Resolved): Meetings(Modify Right)->Problem on Viewing Meetings list by user provided the user is having only Meetings-Modifty access right
- Moving from SP700
- 07:06 PM Bug #2796 (Closed): Block Diagram - Connect two Element and Name the connectors the connector name is not getting placed on the middle of the connector by default. Refer Sheet
- 06:53 PM Bug #2796 (Not Resolved): Block Diagram - Connect two Element and Name the connectors the connector name is not getting placed on the middle of the connector by default. Refer Sheet
- 03:15 PM Bug #2796 (Resolved): Block Diagram - Connect two Element and Name the connectors the connector name is not getting placed on the middle of the connector by default. Refer Sheet
- Moving from SP700
- 07:03 PM Bug #2765 (Not Resolved): TSR- Allocate a Technical function to the element which has the ASIL value (A) and change the AISL value to (B) here system does not update with the new ASIL value
- ASIL value not displaying to the Technical function
- 03:12 PM Bug #2765 (Resolved): TSR- Allocate a Technical function to the element which has the ASIL value (A) and change the AISL value to (B) here system does not update with the new ASIL value
- Moving from SP700
- 07:01 PM Bug #2899 (Closed): Impact:Alert message label is missing when using same doc number within levels/across levels
- Alert message label is missing when using same doc number within levels/across levels
- 07:00 PM Bug #2898 (Closed): IMPACT:Actual audit document is not able to publish in month view
- approval process to actual audit is set to "Yes"
after creating a actual audit for past date which is 1-sep-2017 to ... - 06:59 PM Bug #2769 (Closed): FSR - Add a Function with Multiple requirement and decompose the function now delete one requirement from the parent function system does not delete the requirement
- 03:13 PM Bug #2769 (Resolved): FSR - Add a Function with Multiple requirement and decompose the function now delete one requirement from the parent function system does not delete the requirement
- Moving from SP700
- 06:57 PM Bug #2773 (Closed): FSR - Add a function and Decompose the function with ASIL (c) then add the parent Function to Safety Goal (B), now delete the parent function from safety Goal (C) here system does not change the ASIL value to the corresponding SG
- 03:13 PM Bug #2773 (Resolved): FSR - Add a function and Decompose the function with ASIL (c) then add the parent Function to Safety Goal (B), now delete the parent function from safety Goal (C) here system does not change the ASIL value to the corresponding SG
- Moving from SP700
- 06:54 PM Bug #2776 (Closed): FSR - Adding a Requirement to the Parent Function is not getting reflected where we used the function in another safety Goal
- 03:14 PM Bug #2776 (Resolved): FSR - Adding a Requirement to the Parent Function is not getting reflected where we used the function in another safety Goal
- Moving from SP700
- 06:54 PM Bug #2777 (Closed): FSR- Add up the subdivided function and allocated to the element , then reset the ASIL here system does not refresh the ASIL values to the element until refresh the page
- 03:14 PM Bug #2777 (Resolved): FSR- Add up the subdivided function and allocated to the element , then reset the ASIL here system does not refresh the ASIL values to the element until refresh the page
- Moving from SP700
- 06:53 PM Bug #2800 (Yet to Verify): TSR- Element allocated with the ASIL value is not displaying in the TSR document
- 03:15 PM Bug #2800 (Resolved): TSR- Element allocated with the ASIL value is not displaying in the TSR document
- Moving from SP700
- 06:52 PM Bug #2801 (Closed): FSR - Cont able to allocate the non- ASIL value to the From DFMEA function
- 03:15 PM Bug #2801 (Resolved): FSR - Cont able to allocate the non- ASIL value to the From DFMEA function
- Moving from SP700
- 06:52 PM Bug #2803 (Closed): Adding the Function to the FROM DFMEA will remove the function from the IFM / Functional Analysis which impact the functional document kindly advice
- 03:16 PM Bug #2803 (Resolved): Adding the Function to the FROM DFMEA will remove the function from the IFM / Functional Analysis which impact the functional document kindly advice
- Moving from SP700
- 06:48 PM Bug #2824 (Not Resolved): Block Diagram-Connect the interface with the source and destination arrow and change the interface type system gives the white space between the connection and the element
- It gives blank space once the target Arrow is removed
- 03:16 PM Bug #2824 (Resolved): Block Diagram-Connect the interface with the source and destination arrow and change the interface type system gives the white space between the connection and the element
- Moving from SP700
- 06:45 PM Bug #2825 (Closed): FSR-Cant able to Edit / Reset the Add ASIL value from the Add ASIL Interface
- 03:17 PM Bug #2825: FSR-Cant able to Edit / Reset the Add ASIL value from the Add ASIL Interface
- Moving from SP700
- 03:16 PM Bug #2825 (Resolved): FSR-Cant able to Edit / Reset the Add ASIL value from the Add ASIL Interface
- 06:44 PM Bug #2897 (Closed): FSR- Allocate a ASIL value to the element , the element flow down indication display topic element name as a VOC
- FSR- Requirement allocated to the element is displaying wrong in the VOC Refer Screen Shot
- 06:42 PM Bug #2896 (Closed): Multi-Site: In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.
- In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not respon...
- 06:39 PM Bug #2826 (Closed): FSR-In Master table create a Function/Requirement, leave a blank row and add a value. Here system updates only value entered before the Blank row.
- 03:17 PM Bug #2826: FSR-In Master table create a Function/Requirement, leave a blank row and add a value. Here system updates only value entered before the Blank row.
- Moving from SP700
- 03:16 PM Bug #2826 (Resolved): FSR-In Master table create a Function/Requirement, leave a blank row and add a value. Here system updates only value entered before the Blank row.
- 06:39 PM Bug #2895 (Closed): Multi-Site: In LPA, while checklist mapping with equipment, the check points created in the checklist are not getting shown
- In LPA, while checklist mapping with equipment, the check points created in the checklist are not getting shown
- 06:38 PM Bug #2840 (Closed): Severity/Controllability- Need to restrict edit on the severity /Controllability cell value
- 03:18 PM Bug #2840: Severity/Controllability- Need to restrict edit on the severity /Controllability cell value
- Moving from SP700
- 03:16 PM Bug #2840 (Resolved): Severity/Controllability- Need to restrict edit on the severity /Controllability cell value
- 06:38 PM Bug #2841 (Closed): HARA- Right click on the ASIL value to add safety Goal , Cant able to give Ctrl + Insert on that screen
- 03:18 PM Bug #2841: HARA- Right click on the ASIL value to add safety Goal , Cant able to give Ctrl + Insert on that screen
- Moving from SP700
- 03:15 PM Bug #2841 (Resolved): HARA- Right click on the ASIL value to add safety Goal , Cant able to give Ctrl + Insert on that screen
- 06:38 PM Bug #2842 (Closed): FSR- Alocate ASIL / Dealloate Asil both option available for the cell for the element allocation
- 03:19 PM Bug #2842: FSR- Alocate ASIL / Dealloate Asil both option available for the cell for the element allocation
- Moving from SP700
- 03:15 PM Bug #2842 (Resolved): FSR- Alocate ASIL / Dealloate Asil both option available for the cell for the element allocation
- 06:36 PM Bug #2843 (Closed): FSR- : Adding a requirement to the child function is not getting added until reload the page
- 03:19 PM Bug #2843: FSR- : Adding a requirement to the child function is not getting added until reload the page
- Moving from SP700
- 03:15 PM Bug #2843 (Resolved): FSR- : Adding a requirement to the child function is not getting added until reload the page
- 06:35 PM Bug #2894 (Closed): Multi-Site: In LPA, While mapping the Checklist to an equipment, the dropdown shows the checklist created in that site, it behaves as site based but it is not site specific
- In LPA, While mapping the Checklist to an equipment, the dropdown shows the checklist created in that site, it behave...
- 06:21 PM Bug #2893 (Closed): TSR- Cant able to add multiple requirement for the element and the alignments are not proper
- TSR- Cant able to add multiple requirement for the element and the alignments are not proper
- 06:20 PM Bug #2844 (Closed): TSR- Cant able create a function / Requirement from the TSR document for the corresponding element
- 03:19 PM Bug #2844: TSR- Cant able create a function / Requirement from the TSR document for the corresponding element
- Moving from SP700
- 03:15 PM Bug #2844 (Resolved): TSR- Cant able create a function / Requirement from the TSR document for the corresponding element
- 06:18 PM Bug #2883 (Closed): VOC- Cant able to expand the element Tree on clicking the (+) once allocated to the function refer sheet
- 04:57 PM Bug #2883 (Not Resolved): VOC- Cant able to expand the element Tree on clicking the (+) once allocated to the function refer sheet
- 03:43 PM Bug #2883 (Resolved): VOC- Cant able to expand the element Tree on clicking the (+) once allocated to the function refer sheet
- Moving from SP700
- 03:43 PM Bug #2883 (Open): VOC- Cant able to expand the element Tree on clicking the (+) once allocated to the function refer sheet
- 03:37 PM Bug #2883 (Closed): VOC- Cant able to expand the element Tree on clicking the (+) once allocated to the function refer sheet
- VOC- Cant able to expand the element Tree on clicking the (+) once allocated to the function refer sheet
- 05:51 PM Bug #683 (Closed): All KPIs with reports are not listed in KPI selection page under Visual Analysis -> Dashboard
- 01:30 PM Bug #683 (Resolved): All KPIs with reports are not listed in KPI selection page under Visual Analysis -> Dashboard
- Moving from SP700
- 05:18 PM Bug #2891 (Closed): Multi-Site: In Audit cycle page, the user belongs to the site other than Corporate, that user not able to create schedule for the site which is currently selected in Site drop down.
- In Audit cycle page, the user belongs to the site other than Corporate, that user not able to create schedule for the...
- 05:12 PM Bug #2890 (Closed): Functional Analysis- Cant able to Delete the added Malfunction from the functional Analysis
- Functional Analysis- Cant able to Delete the added Malfunction from the functional Analysis
- 05:10 PM Bug #2889 (Closed): Multi-Site: In Audit Cycle page, the scheduler is not having the rights for Corporate site, While Directly clicking on Add Actual Audit without creating planned audit, allows me to Schedule an audit for corporate site, but it should not allow
- In Audit Cycle page, the scheduler is not having the rights for Corporate site, While Directly clicking on Add Actual...
- 04:59 PM Bug #2888 (Closed): New: In audit program Map entity page, while selecting an entity the Primary contact person set in Entity Page will default mapped here as primary contact person but the Check box colour is not changed to blue, remains as yellow itself
- In audit program Map entity page, while selecting an entity the Primary contact person set in Entity Page will defaul...
- 04:47 PM Bug #2887 (Closed): Multi-Site: Teams page is now working as common for all sites but it Should be site specific
- Teams page is now working as common for all sites but it Should be site specific.
*Note:* Teams that are created i... - 04:40 PM Bug #2839 (Closed): Operation Situation- System allow to delete the given comments once the E2/E1 is given
- 03:18 PM Bug #2839: Operation Situation- System allow to delete the given comments once the E2/E1 is given
- Moving from SP700
- 03:16 PM Bug #2839 (Resolved): Operation Situation- System allow to delete the given comments once the E2/E1 is given
- 04:40 PM Bug #1401 (Yet to Verify): Multidate (yyyy/mm/dd) : In 7D concern form , due date format is not displayed as per user preference Server date : (yyyy/mm/dd)
- 02:12 PM Bug #1401: Multidate (yyyy/mm/dd) : In 7D concern form , due date format is not displayed as per user preference Server date : (yyyy/mm/dd)
- Moving from SP700
- 04:39 PM Bug #2838 (Not Resolved): Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its not accepting the value
- 03:17 PM Bug #2838: Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its not accepting the value
- Moving from SP700
- 03:16 PM Bug #2838 (Resolved): Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its not accepting the value
- 04:34 PM Bug #2419 (Closed): Not able to submit a concern from concern intial evaluation inappropriate message displayed as "champions are not defined.define champions to complete intial evaluation"
- 02:13 PM Bug #2419 (Resolved): Not able to submit a concern from concern intial evaluation inappropriate message displayed as "champions are not defined.define champions to complete intial evaluation"
- Moving from SP700
- 04:25 PM Bug #2886 (Closed): IMPACT:Problem on creating planned audit for a new audit cycle
- when trying to create a planned audit directly planned audit screen displays blank
and when trying to create actual ... - 04:00 PM Bug #2885 (Closed): NEW:Corrective action close out of Auditor for NC/OFI is not displaying the verification details as expexted.
- Corrective action close out of Auditor for NC/OFI is not displaying the verification details as auditor specified
wh... - 04:00 PM Bug #439 (Closed): In business rules → aqua concern settings not able to select category and sub category from dropdown list , when selected wrong selection is shown
- 02:13 PM Bug #439 (Resolved): In business rules → aqua concern settings not able to select category and sub category from dropdown list , when selected wrong selection is shown
- Moving from SP700
- 03:51 PM Bug #1948 (Closed): ,Publish button gets disabled when trying to publish forms like - 8d, team details, possible cause , 7D,CAR,PRR,Advanced CAR,L0
- 02:10 PM Bug #1948 (Resolved): ,Publish button gets disabled when trying to publish forms like - 8d, team details, possible cause , 7D,CAR,PRR,Advanced CAR,L0
- Moving from SP700
- 03:45 PM Bug #2882 (Open): Administrator settings- System is displaying Server error
- 03:20 PM Bug #2882 (Closed): Administrator settings- System is displaying Server error
- Administrator settings- System is displaying Server error
- 03:42 PM Bug #2884 (Resolved): Iten Boundaries- Inner child element shows uncheck in item boundaries where the element is dragged out from the scope box and again add them into the scope box
- Moving from SP700
- 03:42 PM Bug #2884 (Open): Iten Boundaries- Inner child element shows uncheck in item boundaries where the element is dragged out from the scope box and again add them into the scope box
- Moving from SP700
- 03:40 PM Bug #2884 (Closed): Iten Boundaries- Inner child element shows uncheck in item boundaries where the element is dragged out from the scope box and again add them into the scope box
- Item Boundaries- Inner Child Element is unchecked even the element present inside the scope
- 03:38 PM Bug #1916: DocPro: Published Documents was not displaying fully
- Moving from SP700
- 03:37 PM Bug #2767: Social Media in IC Module(Reports) : Clear Reports Functionality is not working in Dashboard nearby Activities option
- Moving from SP700
- 11:59 AM Bug #2767 (Resolved): Social Media in IC Module(Reports) : Clear Reports Functionality is not working in Dashboard nearby Activities option
- 03:35 PM Bug #2701: Reports: Update Reports is not Working for both the Normal & Social Media Layout
- Moving from SP700
- 12:01 PM Bug #2701 (Resolved): Reports: Update Reports is not Working for both the Normal & Social Media Layout
- 03:35 PM Bug #2699: Reports: Saved Reports was not Loading Automatically and not Showing the Details for both the Normal & Social Media Layouts
- Moving from SP700
- 12:01 PM Bug #2699 (Resolved): Reports: Saved Reports was not Loading Automatically and not Showing the Details for both the Normal & Social Media Layouts
- 03:35 PM Bug #2713: Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for YYYY/MM/DD Format
- Moving from SP700
- 12:01 PM Bug #2713 (Resolved): Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for YYYY/MM/DD Format
- 03:34 PM Bug #2716: Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for DD/MM/YYYY Format
- Moving from SP700
- 12:01 PM Bug #2716 (Resolved): Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for DD/MM/YYYY Format
- 03:33 PM Bug #2592: Social Media Layout in IC Module: "JS Error" was Occurring for both the Receiving Inspection/Production TrackingSheet Menu by Clicking on the Receiving Inspection near the Home Button
- Moving from SP700
- 12:02 PM Bug #2592 (Resolved): Social Media Layout in IC Module: "JS Error" was Occurring for both the Receiving Inspection/Production TrackingSheet Menu by Clicking on the Receiving Inspection near the Home Button
- 03:33 PM Bug #2692: Receiving Inspection & Production TrackingSheet Menu: Change Part Option was not Working
- Moving from SP700
- 12:01 PM Bug #2692 (Resolved): Receiving Inspection & Production TrackingSheet Menu: Change Part Option was not Working
- 03:33 PM Bug #2651: Reports: By Clicking on the Bar Chart it showing as "The 'SupplierID' parameter is missing a value"
- Moving from SP700
- 12:01 PM Bug #2651 (Resolved): Reports: By Clicking on the Bar Chart it showing as "The 'SupplierID' parameter is missing a value"
- 03:32 PM Bug #2206: Production Scheduling Menu: Placement of the OK Button for the Production Item, Shift Pop-Ups
- Moving from SP700
- 02:27 PM Bug #2206: Production Scheduling Menu: Placement of the OK Button for the Production Item, Shift Pop-Ups
- Moving from 700
- 12:02 PM Bug #2206 (Resolved): Production Scheduling Menu: Placement of the OK Button for the Production Item, Shift Pop-Ups
- 03:31 PM Bug #2133 (Resolved): Social Media Layout in IC Module: "JS Error" was Occured by Clicking on Equipment Menu
- Moving from SP700
- 03:31 PM Bug #2323: Social Media Layout in IC Module: Equipment Menu was keep on Loading and Can't able to Create a Equipments
- Moving from SP700
- 12:02 PM Bug #2323 (Resolved): Social Media Layout in IC Module: Equipment Menu was keep on Loading and Can't able to Create a Equipments
- 03:30 PM Bug #2694 (Resolved): In find and replace : when replacing invalid data in Target date column the Alert message is not valid
- Moving from SP700
- 03:29 PM Bug #1503: Issue With Work Instructions - There is no Scroll bar in WIS document while having large set of data
- Moving from SP700
- 03:29 PM Bug #2784 (Resolved): In Aquapro -Published document is waiting for Approver but it allows user to publish document again.
- Moving from SP700
- 03:29 PM Bug #2097 (Resolved): In Aqua pro :publish document in different level with approver and terminate document that document ,Again go back and publish same document in different level
- Moving from SP700
- 03:24 PM Bug #2680 (Not Resolved): When forms are selected and published from problem solver, a stiched document entry is created automatically in show document download list
- 26-09-2017 : Refer Screenshot
- 02:11 PM Bug #2680 (Resolved): When forms are selected and published from problem solver, a stiched document entry is created automatically in show document download list
- Moving from SP700
- 03:16 PM Bug #2845 (Closed): Non-Functional Issue: Release Notes: Label for Version is displayed as 7.0.0 -5.4.3, But note is only till 6.3.0. Modify the Label as 7.0.0-6.3.0
- 01:16 PM Bug #2845 (Resolved): Non-Functional Issue: Release Notes: Label for Version is displayed as 7.0.0 -5.4.3, But note is only till 6.3.0. Modify the Label as 7.0.0-6.3.0
- Moving from SP700
- 03:13 PM Bug #2831 (Closed): Edit User - System is allowing to Delete the Administrator in Edit Users Page
- 01:16 PM Bug #2831 (Resolved): Edit User - System is allowing to Delete the Administrator in Edit Users Page
- Moving from SP700
- 03:12 PM Bug #2712 (Closed): Multidate: Holiday List - When assigning YYYY/MM/DD format, Holidays Start date calendar is not working as expected. (Refer Screen shots)
- 01:15 PM Bug #2712 (Resolved): Multidate: Holiday List - When assigning YYYY/MM/DD format, Holidays Start date calendar is not working as expected. (Refer Screen shots)
- Moving from SP700
- 03:11 PM Bug #1717 (Closed): In Meetings page , click on meeting subject the footer text elements does not disappear automatically in rich text control box
- 01:15 PM Bug #1717 (Resolved): In Meetings page , click on meeting subject the footer text elements does not disappear automatically in rich text control box
- Moving from SP700
- 03:11 PM Bug #1699 (Closed): In Holidays List Page, Assigned Holidays are not Displayed as per Assigned Days
- 01:11 PM Bug #1699 (Resolved): In Holidays List Page, Assigned Holidays are not Displayed as per Assigned Days
- Moving from SP700
- 03:11 PM Bug #1695 (Closed): In Process/Activity Page, cannot able to View the Attached File in Audit Form. Displays a Server Error.
- 02:23 PM Bug #1695 (Resolved): In Process/Activity Page, cannot able to View the Attached File in Audit Form. Displays a Server Error.
- Moving from SP700
- 11:56 AM Bug #1695 (Fixed with Hotfix): In Process/Activity Page, cannot able to View the Attached File in Audit Form. Displays a Server Error.
- 03:10 PM Bug #1289 (Closed): Cosmetic Issue: Systems -> In Manufacturer, Supplier and Vendor/Registrar, there is a variation in each row. When moving the Mouse Pointer on it, the Color changes.
- 01:10 PM Bug #1289 (Resolved): Cosmetic Issue: Systems -> In Manufacturer, Supplier and Vendor/Registrar, there is a variation in each row. When moving the Mouse Pointer on it, the Color changes.
- Moving from Sp700
- 03:04 PM Bug #2881 (Closed): Cant able to view the documents in TOC .Error occurs when clicking on the levels in Documents menu
- Cant able to view the documents in TOC .Error occurs when clicking on the levels in Documents menu.After clicking ok ...
- 02:11 PM Bug #2852: Include Concern details form has to be disabled after publish , as the document is waiting for approval/ conversion
- Moving from SP700
- 12:57 PM Bug #2852 (Not Resolved): Include Concern details form has to be disabled after publish , as the document is waiting for approval/ conversion
- 26-09-2017 :With approval set published all the forms , after approving only *include concern details* form all the f...
- 01:27 PM Bug #2531 (Resolved): In Auditee availability confirmation not able to expand any tab.
- Moving from SP700
- 01:26 PM Bug #2591 (Resolved): Corrective actions Status Alignment Issue and displays JS Error on some Fields.
- Moving from SP700
- 01:26 PM Bug #2673 (Resolved): View Previous CAR in auditor Page Search is not Working As Expected.
- Moving from SP700
- 01:15 PM Bug #2764 (Resolved): Administrator setting - Page is displaying random data where system is displaying all default settings.(Refer Description)
- Moving from SP700
- 01:14 PM Bug #1703 (Resolved): SQL2016: In Social Media, When Clicking the Dashboard it Displays a Blank Page.
- Moving from SP700
- 01:10 PM Bug #2772 (Closed): IMPCAT: AQUA Publish from APQP:Publish the aqua document which has approval for the selected level.now again try to publish the same document which is sent to approval it allows to publish and in APQP Deliverable info it shows Duplication.
- 01:08 PM Bug #2772 (Resolved): IMPCAT: AQUA Publish from APQP:Publish the aqua document which has approval for the selected level.now again try to publish the same document which is sent to approval it allows to publish and in APQP Deliverable info it shows Duplication.
- Moving from 700
- 01:10 PM Bug #2797 (Closed): Label issue:When canceling the external lab calibration study,label issue in Deleted successfully alert.
- 01:05 PM Bug #2797: Label issue:When canceling the external lab calibration study,label issue in Deleted successfully alert.
- Moving from 700.
09/25/2017
- 05:55 PM Bug #2489 (Resolved): Alignment Chart-> Risk and Opportunity Form-> Problem on Risk calculation
- 05:03 PM Bug #2419 (Fixed with Hotfix): Not able to submit a concern from concern intial evaluation inappropriate message displayed as "champions are not defined.define champions to complete intial evaluation"
- 05:02 PM Bug #439 (Fixed with Hotfix): In business rules → aqua concern settings not able to select category and sub category from dropdown list , when selected wrong selection is shown
- 04:29 PM Bug #2852 (Resolved): Include Concern details form has to be disabled after publish , as the document is waiting for approval/ conversion
- 04:00 PM Bug #2852 (Open): Include Concern details form has to be disabled after publish , as the document is waiting for approval/ conversion
- 03:06 PM Bug #1916 (Resolved): DocPro: Published Documents was not displaying fully
- 12:37 PM Bug #1401 (Resolved): Multidate (yyyy/mm/dd) : In 7D concern form , due date format is not displayed as per user preference Server date : (yyyy/mm/dd)
- 11:41 AM Bug #2797 (Resolved): Label issue:When canceling the external lab calibration study,label issue in Deleted successfully alert.
09/22/2017
- 07:58 PM Bug #2839 (Fixed with Hotfix): Operation Situation- System allow to delete the given comments once the E2/E1 is given
- 11:46 AM Bug #2839 (Open): Operation Situation- System allow to delete the given comments once the E2/E1 is given
- 11:34 AM Bug #2839 (Closed): Operation Situation- System allow to delete the given comments once the E2/E1 is given
- Operation Situation- System allow to delete the given comments once the E2/E1 is given
- 07:58 PM Bug #2842 (Fixed with Hotfix): FSR- Alocate ASIL / Dealloate Asil both option available for the cell for the element allocation
- 11:46 AM Bug #2842 (Open): FSR- Alocate ASIL / Dealloate Asil both option available for the cell for the element allocation
- 11:41 AM Bug #2842 (Closed): FSR- Alocate ASIL / Dealloate Asil both option available for the cell for the element allocation
- FSR- Allocate ASIL / Deallocate Asil both option available for the cell on the element allocation matrix
- 07:58 PM Bug #2841 (Fixed with Hotfix): HARA- Right click on the ASIL value to add safety Goal , Cant able to give Ctrl + Insert on that screen
- 11:46 AM Bug #2841 (Open): HARA- Right click on the ASIL value to add safety Goal , Cant able to give Ctrl + Insert on that screen
- 11:37 AM Bug #2841 (Closed): HARA- Right click on the ASIL value to add safety Goal , Cant able to give Ctrl + Insert on that screen
- HARA- Right click on the ASIL value to add safety Goal , Cant able to give Ctrl + Insert on that screen
- 07:57 PM Bug #2840 (Fixed with Hotfix): Severity/Controllability- Need to restrict edit on the severity /Controllability cell value
- 11:46 AM Bug #2840 (Open): Severity/Controllability- Need to restrict edit on the severity /Controllability cell value
- 11:36 AM Bug #2840 (Closed): Severity/Controllability- Need to restrict edit on the severity /Controllability cell value
- Severity/Controllability- Need to restrict edit on the severity /Controllability cell value
- 07:57 PM Bug #2838 (Fixed with Hotfix): Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its not accepting the value
- 11:46 AM Bug #2838 (Open): Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its not accepting the value
- 11:32 AM Bug #2838 (Closed): Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its not accepting the value
- Operation Situation- Creating the Operation situation with the Exposure value (E2/E1) is not able to create since its...
- 07:57 PM Bug #2843 (Fixed with Hotfix): FSR- : Adding a requirement to the child function is not getting added until reload the page
- 11:46 AM Bug #2843 (Open): FSR- : Adding a requirement to the child function is not getting added until reload the page
- 11:44 AM Bug #2843 (Closed): FSR- : Adding a requirement to the child function is not getting added until reload the page
- FSR- : Adding a requirement to the child function is not getting added until reload the page
- 07:56 PM Bug #2844 (Fixed with Hotfix): TSR- Cant able create a function / Requirement from the TSR document for the corresponding element
- 11:57 AM Bug #2844 (Open): TSR- Cant able create a function / Requirement from the TSR document for the corresponding element
- 11:46 AM Bug #2844 (Closed): TSR- Cant able create a function / Requirement from the TSR document for the corresponding element
- TSR- Cant able create a function / Requirement from the TSR document for the corresponding element
- 12:52 PM Bug #2852 (Closed): Include Concern details form has to be disabled after publish , as the document is waiting for approval/ conversion
- *Include Concern details* form has to be disabled after publish , as the document is waiting for approval/ conversio...
- 12:18 PM Bug #2845 (Fixed with Hotfix): Non-Functional Issue: Release Notes: Label for Version is displayed as 7.0.0 -5.4.3, But note is only till 6.3.0. Modify the Label as 7.0.0-6.3.0
- 11:57 AM Bug #2845 (Open): Non-Functional Issue: Release Notes: Label for Version is displayed as 7.0.0 -5.4.3, But note is only till 6.3.0. Modify the Label as 7.0.0-6.3.0
- 11:50 AM Bug #2845 (Closed): Non-Functional Issue: Release Notes: Label for Version is displayed as 7.0.0 -5.4.3, But note is only till 6.3.0. Modify the Label as 7.0.0-6.3.0
- Release Notes: Label for Version is displayed as 7.0.0-5.4.3, But note is only till 6.3.0. Modify the Label as Versio...
- 12:14 PM Bug #2699 (Fixed with Hotfix): Reports: Saved Reports was not Loading Automatically and not Showing the Details for both the Normal & Social Media Layouts
- 10:50 AM Bug #2699 (Reopen): Reports: Saved Reports was not Loading Automatically and not Showing the Details for both the Normal & Social Media Layouts
- 12:13 PM Bug #2701 (Fixed with Hotfix): Reports: Update Reports is not Working for both the Normal & Social Media Layout
- 10:50 AM Bug #2701 (Reopen): Reports: Update Reports is not Working for both the Normal & Social Media Layout
09/21/2017
- 04:40 PM Bug #2716 (Fixed with Hotfix): Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for DD/MM/YYYY Format
- 04:40 PM Bug #2713 (Fixed with Hotfix): Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for YYYY/MM/DD Format
- 12:41 PM Bug #2694 (Fixed with Hotfix): In find and replace : when replacing invalid data in Target date column the Alert message is not valid
- 12:41 PM Bug #2694 (Reopen): In find and replace : when replacing invalid data in Target date column the Alert message is not valid
- 12:28 PM Bug #2694 (Closed): In find and replace : when replacing invalid data in Target date column the Alert message is not valid
09/20/2017
- 08:58 PM Bug #2591 (Fixed with Hotfix): Corrective actions Status Alignment Issue and displays JS Error on some Fields.
- 08:58 PM Bug #2531 (Fixed with Hotfix): In Auditee availability confirmation not able to expand any tab.
- 05:55 PM Bug #2673 (Fixed with Hotfix): View Previous CAR in auditor Page Search is not Working As Expected.
- 02:48 PM Bug #1699 (Fixed with Hotfix): In Holidays List Page, Assigned Holidays are not Displayed as per Assigned Days
- 02:41 PM Bug #2716: Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for DD/MM/YYYY Format
- not an issue , the form design its not as per reorg
- 02:38 PM Bug #2831 (Fixed with Hotfix): Edit User - System is allowing to Delete the Administrator in Edit Users Page
- 02:35 PM Bug #2831 (Open): Edit User - System is allowing to Delete the Administrator in Edit Users Page
- 01:44 PM Bug #2831 (Closed): Edit User - System is allowing to Delete the Administrator in Edit Users Page
- System is allowing to Delete the Administrator in Edit Users Page
- 01:48 PM Bug #683: All KPIs with reports are not listed in KPI selection page under Visual Analysis -> Dashboard
- 09/21/2017 - ON SP7001
Issue fixed with hotfix - 01:48 PM Bug #2353: Meetings(Modify Right)->Problem on Viewing Meetings list by user provided the user is having only Meetings-Modifty access right
- 09/21/2017 - ON SP7001
Issue fixed with hotfix
- 01:44 PM Bug #2670: Problem on Document View in DocPro (Both Website and Virtual Directory - Application Type)
- 09/21/2017 - ON SP7001
1. Virtual Directory -> Issue fixed with hotfix
2. website -> Folder is not created under ... - 01:41 PM Bug #1289 (Fixed with Hotfix): Cosmetic Issue: Systems -> In Manufacturer, Supplier and Vendor/Registrar, there is a variation in each row. When moving the Mouse Pointer on it, the Color changes.
- 01:38 PM Bug #2592 (Fixed with Hotfix): Social Media Layout in IC Module: "JS Error" was Occurring for both the Receiving Inspection/Production TrackingSheet Menu by Clicking on the Receiving Inspection near the Home Button
- 01:34 PM Bug #2592 (Reopen): Social Media Layout in IC Module: "JS Error" was Occurring for both the Receiving Inspection/Production TrackingSheet Menu by Clicking on the Receiving Inspection near the Home Button
- 01:10 PM Bug #1703 (Fixed with Hotfix): SQL2016: In Social Media, When Clicking the Dashboard it Displays a Blank Page.
- 01:09 PM Bug #1703 (Future Release): SQL2016: In Social Media, When Clicking the Dashboard it Displays a Blank Page.
- 11:30 AM Bug #1703: SQL2016: In Social Media, When Clicking the Dashboard it Displays a Blank Page.
- As discussed with QA Manager, As of now suite has no reports we are showing alert saying that 'No reports assigned' a...
- 12:59 PM Bug #2694 (Resolved): In find and replace : when replacing invalid data in Target date column the Alert message is not valid
- Date search will ignore filter conditions like match with, start with etc and do only = (equal to).
This is update... - 10:22 AM Bug #1503 (Resolved): Issue With Work Instructions - There is no Scroll bar in WIS document while having large set of data
- Fixed and updated in SP 7.0.0.1
09/19/2017
- 01:35 PM Bug #2133 (Fixed with Hotfix): Social Media Layout in IC Module: "JS Error" was Occured by Clicking on Equipment Menu
- As Per Radhiga Hot fix is ready,so changing the status to Fixed with Hotfix
- 01:35 PM Bug #2323 (Fixed with Hotfix): Social Media Layout in IC Module: Equipment Menu was keep on Loading and Can't able to Create a Equipments
- As Per Radhiga Hot fix is ready,so changing the status to Fixed with Hotfix
09/18/2017
- 05:09 PM Bug #2353 (Fixed with Hotfix): Meetings(Modify Right)->Problem on Viewing Meetings list by user provided the user is having only Meetings-Modifty access right
- 04:48 PM Bug #2824 (Fixed with Hotfix): Block Diagram-Connect the interface with the source and destination arrow and change the interface type system gives the white space between the connection and the element
- 04:46 PM Bug #2824 (Open): Block Diagram-Connect the interface with the source and destination arrow and change the interface type system gives the white space between the connection and the element
- 03:47 PM Bug #2824 (Closed): Block Diagram-Connect the interface with the source and destination arrow and change the interface type system gives the white space between the connection and the element
- Block Diagram-Connect the interface with the source and destination arrow and change the interface type system gives ...
- 04:47 PM Bug #2826 (Fixed with Hotfix): FSR-In Master table create a Function/Requirement, leave a blank row and add a value. Here system updates only value entered before the Blank row.
- 04:46 PM Bug #2826 (Open): FSR-In Master table create a Function/Requirement, leave a blank row and add a value. Here system updates only value entered before the Blank row.
- 03:48 PM Bug #2826 (Closed): FSR-In Master table create a Function/Requirement, leave a blank row and add a value. Here system updates only value entered before the Blank row.
- In Master table create a Function/Requirement, leave a blank row and add a value. Here system updates only value ente...
- 04:47 PM Bug #2825 (Fixed with Hotfix): FSR-Cant able to Edit / Reset the Add ASIL value from the Add ASIL Interface
- 04:46 PM Bug #2825 (Open): FSR-Cant able to Edit / Reset the Add ASIL value from the Add ASIL Interface
- 03:47 PM Bug #2825 (Closed): FSR-Cant able to Edit / Reset the Add ASIL value from the Add ASIL Interface
- FSR-Cant able to Edit / Reset the Add ASIL value from the Add ASIL Interface
- 11:52 AM Bug #2712: Multidate: Holiday List - When assigning YYYY/MM/DD format, Holidays Start date calendar is not working as expected. (Refer Screen shots)
- When the Date format is in DD/MM/YYYY and Saving the Holiday list, system is displaying error.
09/15/2017
- 05:44 PM Bug #1717 (Fixed with Hotfix): In Meetings page , click on meeting subject the footer text elements does not disappear automatically in rich text control box
- 05:43 PM Bug #2712 (Fixed with Hotfix): Multidate: Holiday List - When assigning YYYY/MM/DD format, Holidays Start date calendar is not working as expected. (Refer Screen shots)
- 04:46 PM Bug #2206 (Fixed with Hotfix): Production Scheduling Menu: Placement of the OK Button for the Production Item, Shift Pop-Ups
09/14/2017
- 04:00 PM Bug #2713: Production TrackingSheet Menu: Date Format & Date Picker was showing wrongly in Reaction Plan for YYYY/MM/DD Format
- This is not an issue, its an non-editable field, the template (db script) provided for testing purpose , its not a re...
- 01:59 PM Bug #2680 (Fixed with Hotfix): When forms are selected and published from problem solver, a stiched document entry is created automatically in show document download list
09/12/2017
- 12:57 PM Bug #2764 (Fixed with Hotfix): Administrator setting - Page is displaying random data where system is displaying all default settings.(Refer Description)
- 11:41 AM Bug #2796 (Fixed with Hotfix): Block Diagram - Connect two Element and Name the connectors the connector name is not getting placed on the middle of the connector by default. Refer Sheet
- 11:34 AM Bug #2765 (Fixed with Hotfix): TSR- Allocate a Technical function to the element which has the ASIL value (A) and change the AISL value to (B) here system does not update with the new ASIL value
- 11:34 AM Bug #2769 (Fixed with Hotfix): FSR - Add a Function with Multiple requirement and decompose the function now delete one requirement from the parent function system does not delete the requirement
- 11:34 AM Bug #2776 (Fixed with Hotfix): FSR - Adding a Requirement to the Parent Function is not getting reflected where we used the function in another safety Goal
- 11:34 AM Bug #2803 (Fixed with Hotfix): Adding the Function to the FROM DFMEA will remove the function from the IFM / Functional Analysis which impact the functional document kindly advice
- 11:33 AM Bug #2773 (Fixed with Hotfix): FSR - Add a function and Decompose the function with ASIL (c) then add the parent Function to Safety Goal (B), now delete the parent function from safety Goal (C) here system does not change the ASIL value to the corresponding SG
- 11:33 AM Bug #2777 (Fixed with Hotfix): FSR- Add up the subdivided function and allocated to the element , then reset the ASIL here system does not refresh the ASIL values to the element until refresh the page
- 11:33 AM Bug #2800 (Fixed with Hotfix): TSR- Element allocated with the ASIL value is not displaying in the TSR document
- 11:33 AM Bug #2801 (Fixed with Hotfix): FSR - Cont able to allocate the non- ASIL value to the From DFMEA function
- 11:32 AM Bug #1948 (Fixed with Hotfix): ,Publish button gets disabled when trying to publish forms like - 8d, team details, possible cause , 7D,CAR,PRR,Advanced CAR,L0
09/11/2017
- 05:27 PM Bug #2769 (Fixed in Dev): FSR - Add a Function with Multiple requirement and decompose the function now delete one requirement from the parent function system does not delete the requirement
- 02:57 PM Bug #683 (Fixed with Hotfix): All KPIs with reports are not listed in KPI selection page under Visual Analysis -> Dashboard
- 02:33 PM Bug #2803 (Fixed in Dev): Adding the Function to the FROM DFMEA will remove the function from the IFM / Functional Analysis which impact the functional document kindly advice
- 10:42 AM Bug #2803 (Open): Adding the Function to the FROM DFMEA will remove the function from the IFM / Functional Analysis which impact the functional document kindly advice
- 01:46 PM Bug #2670 (Fixed with Hotfix): Problem on Document View in DocPro (Both Website and Virtual Directory - Application Type)
- 01:29 PM Bug #2694 (In Progress): In find and replace : when replacing invalid data in Target date column the Alert message is not valid
- 01:03 PM Bug #2797 (Fixed with Hotfix): Label issue:When canceling the external lab calibration study,label issue in Deleted successfully alert.
- 11:05 AM Bug #2777 (Fixed in Dev): FSR- Add up the subdivided function and allocated to the element , then reset the ASIL here system does not refresh the ASIL values to the element until refresh the page
- 11:04 AM Bug #2801 (Fixed in Dev): FSR - Cont able to allocate the non- ASIL value to the From DFMEA function
- 10:42 AM Bug #2801 (Open): FSR - Cont able to allocate the non- ASIL value to the From DFMEA function
- 11:04 AM Bug #2800 (Fixed in Dev): TSR- Element allocated with the ASIL value is not displaying in the TSR document
- 10:42 AM Bug #2800 (Open): TSR- Element allocated with the ASIL value is not displaying in the TSR document
Also available in: Atom