Project

General

Profile

Actions
Copy link

Bug #2896

closed

Multi-Site: In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.

Added by Rupa K almost 8 years ago. Updated over 7 years ago.

Status:
Closed
Priority:
ShowStopper
Assignee:
Nikhil d
Start date:
09/26/2017
Due date:
% Done:

100%

Estimated time:
Steps To Reproduce:

1. Log in as Administrator (Omnex-Chennai).
2. Go to Module set up tab.
3. Click on Checklist menu.
4. Create new checklist with check points.
5. Expand Module set up, click on Equipment type and create type.
6. Go to Equipment and create new equipment.
7. Got to Audit mode and create new audit mode.
8. Go to Layers menu and create new layer.
9. In equipment page right click on equipment and click assign check list.
10. Click "+" icon and click on that drop down list and Select the check list.
11. Go to LPA Schedule.
12. Select the layer and the year.
13. Click on Create Schedule.
14. Click on the refresh icon and observe.

MODULES:
AUDITPRO
Build Cycle:
Cycle 1
Customer:
Issue Dependency:

Description

In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.

Files

Download all files
LPA Schedule 1.png (83 KB) LPA Schedule 1.png Rupa K, 09/26/2017 06:41 PM
LPA Schedule 2.png (90.8 KB) LPA Schedule 2.png Rupa K, 09/26/2017 06:41 PM
LPA Schedule 3.png (73.1 KB) LPA Schedule 3.png Rupa K, 09/26/2017 06:41 PM
LPA Schedule 4.png (99.7 KB) LPA Schedule 4.png Rupa K, 09/26/2017 06:41 PM
LPA schedule.PNG (85.9 KB) LPA schedule.PNG Anonymous, 10/05/2017 05:52 PM
Actions
Copy link
 #1

Updated by Anonymous almost 8 years ago

  • Status changed from New to Open
Actions
Copy link
 #2

Updated by Bijoy P almost 8 years ago

  • Assignee changed from Bijoy P to Nikhil d
Actions
Copy link
 #3

Updated by Nikhil d almost 8 years ago

  • Status changed from Open to Fixed in Dev
  • % Done changed from 0 to 100

LPA Schedule Can Be done only after assigning Shifts to users. It Is not a ShowStopper(once shifts are assigned you can able to verify)

Actions
Copy link
 #4

Updated by Nikhil d almost 8 years ago

  • Status changed from Fixed in Dev to Fixed with Hotfix
Actions
Copy link
 #5

Updated by Rupa K almost 8 years ago

  • Subject changed from In LPA, after setting all the prerequisites going to LAP audit Schedule and clicking on Create Schedule is not responding also the schedule is not created. to In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.
  • Description updated (diff)
Actions
Copy link
 #6

Updated by Rupa K almost 8 years ago

  • Subject changed from In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created. to Multi-Site: In LPA, after setting all the prerequisites going to LPA audit Schedule and clicking on Create Schedule is not responding also the schedule is not created.
Actions
Copy link
 #7

Updated by Nikhil d over 7 years ago

  • Status changed from Fixed with Hotfix to Resolved
Actions
Copy link
 #8

Updated by Anonymous over 7 years ago

closed in710

Actions
Copy link

Also available in: Atom PDF