EwQIMS SP710

1. Log in as Administrator (Chennai).
2. Go to Module set up tab.
3. Click on Checklist menu.
4. Create new checklist with check points.
5. Expand Module set up, click on Equipment type and create type.
6. Go to Equipment and create new equipment.
7. Got to Audit mode and create new audit mode.
8. Go to Layers menu and create new layer.
9. In equipment page right click on equipment and click assign check list.
10. Click on new and add 1 checklist.
11. Click new again and try to add one more checklist and observe