Activity
From 12/26/2019 to 01/24/2020
01/24/2020
- 07:40 PM Bug #15600 (Closed): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting char...
- 07:34 PM Bug #15571 (In Progress): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- 03:15 PM Bug #15571 (Not Resolved): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- Verified few fields are still have alignment issue.refer screen shot
- 07:13 PM Bug #15558 (Resolved): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 06:54 PM Bug #15599 (Closed): Multi-Site : Created departments are not listing in Operator menu
- Multi-Site : Created departments are not listing in Operator menu
- 06:53 PM Bug #15598 (Closed): Report --> gage due report is not showing in the report tab
- Calibration, Calibration verification, GRR attribute and stability --> When clicking on Report button, it shows error...
- 06:46 PM Bug #15383 (Closed): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 06:42 PM Bug #15520 (In Progress): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 05:25 PM Bug #15520 (Not Resolved): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 06:41 PM Bug #15394 (Not Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 06:41 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- fixed and check in to tfs
- 06:40 PM Bug #15394 (Not Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 06:39 PM Bug #15364 (Closed): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- Issue occurs Sporadically. So Closed in SP925 Cycle 5
- 06:37 PM Bug #14973 (Closed): Receiving Inspection : Inspection entry pop-up is not loading for PIs having special characters in Invoice number
- Works with below special characters !@$%^&*()-:<>
- 06:35 PM Bug #15509 (Closed): Design and Process VDA - Step 7 takes more time to load.(16 Seconds)
- Closed in SP925 Cycle 5
- 06:34 PM Bug #15497 (Closed): Process VDA - Failure Analysis - While performing Skip Level Flow down it duplicates the Element
- Closed in SP925 Cycle 5
- 06:34 PM Bug #15502 (Closed): (Multi Date)Design and Process VDA - When the Date format is changed, Following issues occurs.(Refer Description)
- Closed in SP925 Cycle 5
- 06:33 PM Bug #15508 (Closed): Design and Process VDA - Dates are not displayed as per Date format.(DD/MM/YYYY) (Refer Description)
- Closed in SP925 Cycle 5
- 06:29 PM Bug #15561 (Closed): Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) approved label is not converted into Chinese and Spanish
- 06:27 PM Bug #15593 (Resolved): Copying any value in new cummins report it takes some space in front
- If we manually entered it will not take space means you are copying with space
- 06:26 PM Bug #15593 (Open): Copying any value in new cummins report it takes some space in front
- Not an issue. Verified in 47.
- 04:16 PM Bug #15593 (Closed): Copying any value in new cummins report it takes some space in front
- Copying any value in new cummins report it takes some space in front
- 06:25 PM Bug #15427 (Closed): Actions: When a user tries to complete the Bias, Calibration, Calibration verification, Linearity, GRR and stability study through action screen, without entering the Approved and Remarks field it getting saved.
- 06:21 PM Bug #15352 (Closed): Master--> Able to save the master without entering the linearity initial schedule
- 06:19 PM Bug #15438 (Closed): Even After mapping KPIs to the Dashboard, clicking on it not displays the reports related to it.
- 05:57 PM Bug #15354 (Not Resolved): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 05:45 PM Bug #15457 (Closed): Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is scheduled in Site 2
- 05:42 PM Bug #15499 (Closed): EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- Closed in SP925 Cycle 5
- 05:35 PM Bug #15418 (Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 05:35 PM Bug #15390 (Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 05:34 PM Bug #15565 (Closed): Tree Diagram: Edited requirement with large data, failure and requirements are overlapped
- Closed in SP925 Cycle 5
- 05:32 PM Bug #15559 (Closed): Tree Diagram: Edited requirement displayed outside the element Box
- Closed in SP925 Cycle 5
- 05:28 PM Bug #15519 (Closed): EFC Tree: Function Flow down element is displayed in EFC Tree, When nothing is mapped on It
- Closed in SP925 Cycle 5
- 05:27 PM Bug #15596 (Resolved): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- 05:26 PM Bug #15596 (Open): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- No able to replicate
- 04:58 PM Bug #15596 (Closed): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- 05:12 PM Bug #15535 (Closed): Document: GIF document is viewed as Image
- 05:12 PM Bug #15533 (Closed): Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to set the existing download name for newly downloaded documents
- 05:10 PM Bug #15547 (TBD): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 05:10 PM Bug #15547 (Open): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 01:12 PM Bug #15547 (Not Resolved): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 05:03 PM Bug #15567 (Closed): Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- Verified in Cy-5 Build and closed
- 05:01 PM Bug #15471 (Closed): VOC: While enter large word in VOC the alignment is not proper
- Closed in SP925 Cycle 5
- 04:59 PM Bug #15597 (Closed): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator
- Production OEE: When creating the 5 different part with description and selecting two for parts production in product...
- 04:56 PM Bug #15382 (Closed): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- Closed in SP925 Cycle 5
- 04:56 PM Bug #15568 (Closed): Server error is displayed while publishing the document Using Manufacturing Report
- Verified in Cy-5 build and Closed
- 04:52 PM Bug #15323 (Closed): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- Closed in SP925 Cycle 5
- 04:49 PM Suggestion #15337 (Closed): Bill of Material - Last Added and Added First can be Renamed as Last Added and First Added
- Closed in SP925 Cycle 5
- 04:47 PM Bug #15539 (Closed): Block Diagram: color is not applied and its not working in Show Interface Type
- Closed in SP925 Cycle 5
- 04:46 PM Bug #15545 (Closed): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 04:44 PM Bug #15563 (Closed): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- Closed in SP925 Cycle 5
- 04:41 PM Bug #15546 (Closed): TSR: While Adding functions in TSR the alignment is not proper
- Closed in SP925 Cycle 5
- 04:37 PM Bug #15570 (Closed): TSR - Safety goal ID is not displayed in TSR Document
- Closed in SP925 Cycle 5
- 04:18 PM Bug #15595 (Closed): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Is...
- 04:17 PM Bug #15594 (Closed): Label issue in new cummins report for THLcolor code
- Label issue in new cummins report for THLcolor code
- 04:14 PM Bug #15592 (Closed): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- 04:12 PM Bug #15591 (Closed): Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inherited for checklists 'parent has score' alert keep on displaying
- Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inhe...
- 04:05 PM Bug #15590 (Closed): Subsystem option is not listing in Part tree loaded by in add part screen
- Subsystem option is not listing in Part tree loaded by in add part screen
- 04:03 PM Bug #15589 (Closed): Unable to add parts selected from part tree loaded as 'system'
- Unable to add parts selected from part tree loaded as 'system'
- 04:02 PM Bug #15588 (Closed): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity
- Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not s...
- 03:59 PM Bug #15587 (Closed): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- 03:57 PM Bug #15586 (Closed): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- 03:56 PM Bug #15585 (Resolved): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 03:54 PM Bug #15443 (Not Resolved): Report Issues : Please refer the description
- 03:52 PM Bug #15443 (Yet to Verify): Report Issues : Please refer the description
- 03:51 PM Bug #14419 (Closed): Multi Language : Please see the below mentioned issues
- 03:50 PM Bug #14419 (Fixed with Hotfix): Multi Language : Please see the below mentioned issues
- 03:41 PM Bug #15553 (Closed): Multi langugage
- 03:40 PM Bug #13275 (Closed): Inspection parameters:Pagination and sorting is not working as expected in characteristics grid
- 03:35 PM Bug #15514 (Closed): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 03:27 PM Bug #15583 (Closed): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment
- "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with...
- 03:24 PM Bug #15582 (Closed): Re upload Extension request is not working
- Re upload Extension request is not working
Verified in Inst 1 and Inst 3 DB's - 03:19 PM Bug #15524 (Closed): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- verified and working fine in CY5
- 03:19 PM Bug #15530 (Closed): New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to auditee" Issue2:not able to view in "Click to view report" and also
- verified and working fine in CY5
- 03:18 PM Bug #15581 (Closed): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message
- Multi language: Social media--> When tries to change the language from logged in (language preference) details, it sh...
- 03:15 PM Bug #15555: Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- For non ITAR the ITAR level created in Aqua still displays.
- 03:15 PM Bug #15555 (Closed): Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- 03:13 PM Bug #15572 (Closed): New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- 03:13 PM Bug #15572: New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- verified and working fine in CY5
- 03:13 PM Bug #15575 (Closed): New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit status is not matched.find the screen shot
- verified and working fine in CY5
- 03:13 PM Bug #15580 (Closed): Suite : When Assigning module access for the first time the Drop down is not displaying fully
- When Assigning module access for the first time the Drop down is not displaying fully
- 03:13 PM Bug #15576 (Closed): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- verified and working fine in CY5
- 03:08 PM Bug #15527 (Closed): TOC:When doing revision/deletion, Level tree should be displayed in LHS screen and the RHS should show action screen
- 03:08 PM Bug #15521 (Closed): Document Mgmt:For a particular folder FCPA, route link is not displayed
- 03:08 PM Bug #15488 (Closed): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- 03:04 PM Bug #15503 (Closed): Folder Management: Without selecting ITAR route, it should not allow the user to save the folder if the user checks EDIT ITAR route checkbox. Show alert message instead of allowing to save
- 03:04 PM Bug #15504 (Closed): Route: On entering the existing route name and create a new route, system shows saved successfully and the new route screen shows the form w/o any data
- 03:02 PM Bug #15507 (Closed): New Draft Request: By default draft requester should be the draft viewer. The draft viewer is not taken when selecting draft viewers and checked ITAR compliance and unchecked it and continue(pls check desc as well)
- 03:01 PM Bug #15491 (Closed): Sort/Scrap/Rework qty is displaying for all Receiving/Final/Inprocess Inspection items in department worksheet
- 02:57 PM Bug #15512 (Closed): Generate document URL is not working as expected, shows blank screen when pasting the URL. After sometime, it asks the user to open/Save in IE and opens the document in IE edge. NON ITAR user can view the ITAR document by using this link
- 02:56 PM Bug #15554 (Closed): Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment
- 02:54 PM Bug #15579 (Closed): Suite : Supplier is not getting created even after filling all the mandatory fields.
- Supplier is not getting created even after filling all the mandatory fields.
- 02:49 PM Bug #15284 (Closed): ShowStopper: Non-ITAR User can able to access the ITAR PI Documents
- This issue is fixed so closing this issue in Cy-5 on 24.01.2020
- 02:48 PM Bug #15385 (Closed): Utility Equipment: Need Equipment path details for Utility Equipment
- 02:46 PM Bug #15408 (Closed): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- 02:45 PM Bug #15522 (Closed): Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown, but it shows assign by admin in doc mgmt route link dropdown
- 02:44 PM Bug #15387 (Closed): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- 02:43 PM Bug #15523 (Closed): ITAR document is going to NON ITAR Approver. PFB the scenario
- 02:40 PM Bug #15540 (Not Resolved): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 02:38 PM Bug #15513 (Closed): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 02:26 PM Bug #15528 (Closed): Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- 02:23 PM Bug #15543 (Closed): PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated(Requested yo delivered)
- 02:23 PM Bug #15292 (Closed): NON-ITAR Users: Users can able to Copy and Paste the ITAR PI Segments
- This issue is fixed so closing this issue in Cy-5 on 24.01.2020
- 02:20 PM Bug #15472 (Yet to Verify): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 02:19 PM Bug #15517 (Closed): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 02:18 PM Bug #15532 (Closed): Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document change request in admin actions.Also the NONITAR module admin can able to modify/bypass the approvers from admin action for an ITAR document
- 02:09 PM Bug #15577 (Closed): Main2: Search PI is not working
- This issue is fixed so closing this issue in Cy-5 on 24.01.2020
- 02:05 PM Bug #15378 (Closed): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 02:03 PM Bug #15506 (Closed): In New Concern page, after selecting the supplier, the supplier part number field is not showing the parts that are linked to the selected supplier
- 02:02 PM Bug #15453 (Closed): Resource load across projects showing blank page
- But performance wise it takes time
- 02:00 PM Bug #15455 (Closed): Attach task from template - "Select deliverable" button can be view only after scrolling
- 02:00 PM Bug #15455 (Fixed with Hotfix): Attach task from template - "Select deliverable" button can be view only after scrolling
- Not seeing the scroll in Team 1 DB
- 10:59 AM Bug #15391 (Resolved): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 10:31 AM Bug #15560 (Closed): Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
01/23/2020
- 10:18 PM Bug #15563 (Resolved): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- 05:42 PM Bug #15563 (In Progress): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- 10:18 PM Bug #15570 (Resolved): TSR - Safety goal ID is not displayed in TSR Document
- 05:42 PM Bug #15570 (In Progress): TSR - Safety goal ID is not displayed in TSR Document
- 09:27 PM Bug #15524 (Resolved): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- as per discussion with sabu. Subsystem option is removed
- 12:29 PM Bug #15524 (Not Fixed with Hotfix): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- Part tree loaded by 'sub system' option is missing.find screen shot
- 09:24 PM Bug #15576 (Resolved): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- 12:02 PM Bug #15576 (Not Fixed with Hotfix): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- still part sync is not working
- 11:00 AM Bug #15576 (Resolved): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- 10:59 AM Bug #15576 (Open): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- 08:35 PM Bug #15571 (Resolved): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- 08:34 PM Bug #15467 (Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance
- Need to update Auditreport Folder name in 'Au_GetAuditApplicationInstance'
update Au_GetAuditApplicationInstance s... - 08:17 PM Bug #15520 (Resolved): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 05:41 PM Suggestion #15337 (Resolved): Bill of Material - Last Added and Added First can be Renamed as Last Added and First Added
- 05:41 PM Bug #15323 (Resolved): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 05:40 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 01:38 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 12:26 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 05:39 PM Bug #15509 (Resolved): Design and Process VDA - Step 7 takes more time to load.(16 Seconds)
- 05:35 PM Bug #15464 (Resolved): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- 03:44 PM Bug #15464 (Not Resolved): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- In above case two different datas are displayed. One is showing 2 and other one is showing 3
- 05:35 PM Bug #15436 (Resolved): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 02:00 PM Bug #15436 (Not Resolved): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- Refer the site : TCL1 having three BU. (B3,B4,B5)
- 12:26 PM Bug #15436 (Resolved): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 05:11 PM Bug #15531 (Fixed with Hotfix): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- 05:11 PM Bug #15531: New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- Verified and working fine as hot fix
- 04:50 PM Bug #15502 (Fixed with Hotfix): (Multi Date)Design and Process VDA - When the Date format is changed, Following issues occurs.(Refer Description)
- 04:43 PM Bug #15508 (Fixed with Hotfix): Design and Process VDA - Dates are not displayed as per Date format.(DD/MM/YYYY) (Refer Description)
- 04:03 PM Bug #15577 (Fixed with Hotfix): Main2: Search PI is not working
- 03:10 PM Bug #15577 (Resolved): Main2: Search PI is not working
- Fixed and patches provided for testing
- 02:13 PM Bug #15577 (Open): Main2: Search PI is not working
- 11:52 AM Bug #15577 (Closed): Main2: Search PI is not working
- In Main2, the Search PI is not working but its working in Main Menu. If we entered any PI Name and Click on Search Ic...
- 03:41 PM Bug #15527 (Resolved): TOC:When doing revision/deletion, Level tree should be displayed in LHS screen and the RHS should show action screen
- 03:40 PM Bug #15528 (Resolved): Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- 03:27 PM Bug #15431 (Closed): Report -> Audit - Repeat Non Conformance -> The graph is showing OFI data. Ex: Auditor identified one NC + One OFI by using same Non Conformity data"
- 03:10 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- again I am trying to replicate the issues but cant able to replicate the issues.
- 01:07 PM Bug #15394 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 03:09 PM Bug #15364 (Resolved): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- again I am trying to replicate the issue but cant able to replicate the issues in the above description.
- 01:01 PM Bug #15364 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 02:59 PM Bug #15512 (Resolved): Generate document URL is not working as expected, shows blank screen when pasting the URL. After sometime, it asks the user to open/Save in IE and opens the document in IE edge. NON ITAR user can view the ITAR document by using this link
- 02:44 PM Bug #15559 (Resolved): Tree Diagram: Edited requirement displayed outside the element Box
- Not ale to replicate
- 02:27 PM Bug #15390 (Not Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 12:26 PM Bug #15390 (Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 02:21 PM Bug #15383 (Resolved): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 01:05 PM Bug #15383 (Not Fixed with Hotfix): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 02:09 PM Bug #15461 (Closed): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- 12:26 PM Bug #15461 (Resolved): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- 02:04 PM Bug #15553: Multi langugage
- Issue 13: Resources allocation--> Label is not converted - Future
- 02:03 PM Bug #15553 (Resolved): Multi langugage
- Issue 1:Social Media--> Default layout--> Status for PM, BD, Spare part maintenance and Request status is not convert...
- 01:16 PM Bug #15418 (Not Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- Scheduled audit is not displayed (Scheduled / Deadline violated)
- 12:26 PM Bug #15418 (Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 12:18 PM Bug #15525 (Fixed with Hotfix): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- verified and working fine as hot fix
- 12:17 PM Bug #15529 (Fixed with Hotfix): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- verified and working fine as hot fix
- 12:16 PM Bug #15574 (Fixed with Hotfix): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- verified and working fine as hot fix
- 12:00 PM Bug #15548 (Fixed with Hotfix): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- verified and working fine as hot fix
- 11:59 AM Bug #15572: New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- #15571 relates to alignment issue also
- 11:41 AM Bug #15354 (Resolved): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 11:04 AM Bug #15537: Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- Not an issue...instance file is in read only
- 11:02 AM Bug #15537 (Resolved): Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- 11:03 AM Bug #15359 (Resolved): Multi site: Email->Email link is not redirecting to correct location
- 11:02 AM Bug #15566 (Resolved): Created a Escalation Route with special character given in the description field. in the listing it is showing as route name , description and site value incorrectly. Not able to open the route also for editing.
- 11:02 AM Bug #15342 (Resolved): Uppercase and lower case should be proper throughout site
- 10:53 AM Bug #15503 (Resolved): Folder Management: Without selecting ITAR route, it should not allow the user to save the folder if the user checks EDIT ITAR route checkbox. Show alert message instead of allowing to save
- 10:13 AM Bug #15560 (Resolved): Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
- Not an issue working as expected
- 10:13 AM Bug #15488 (Resolved): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
01/22/2020
- 09:26 PM Bug #15567 (Resolved): Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- 11:32 AM Bug #15567 (Open): Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- 09:13 PM Bug #15427 (Resolved): Actions: When a user tries to complete the Bias, Calibration, Calibration verification, Linearity, GRR and stability study through action screen, without entering the Approved and Remarks field it getting saved.
- 08:35 PM Bug #15506 (Resolved): In New Concern page, after selecting the supplier, the supplier part number field is not showing the parts that are linked to the selected supplier
- 07:38 PM Bug #15461 (In Progress): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- 07:38 PM Bug #15436 (In Progress): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 07:38 PM Bug #15429 (In Progress): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 07:38 PM Bug #15418 (In Progress): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 07:38 PM Bug #15390 (In Progress): Report -> Audit Repeat NC -> Various finding status is missing
- 07:36 PM Bug #15575 (Resolved): New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit status is not matched.find the screen shot
- 07:36 PM Bug #15575 (Open): New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit status is not matched.find the screen shot
- Not an issue.
It was the report at the time of publish. You can Verify Rev No also not changed in the Report. - 04:51 PM Bug #15575 (Closed): New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit status is not matched.find the screen shot
- New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit stat...
- 07:34 PM Bug #15542 (Resolved): New Cummins VAM Report->Audit Status->New report is not displayed in audit status .pls find screen shot
- Fixed. Kindly verify after applying Hot fixes/Next build
- 06:41 PM Bug #15545 (Fixed with Hotfix): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 11:27 AM Bug #15545 (Resolved): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 06:12 PM Bug #15574 (Resolved): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- 04:31 PM Bug #15574 (Open): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- 02:55 PM Bug #15574 (Closed): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- 06:10 PM Bug #15352 (Resolved): Master--> Able to save the master without entering the linearity initial schedule
- 06:10 PM Bug #15561 (Resolved): Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) approved label is not converted into Chinese and Spanish
- 11:32 AM Bug #15561 (Open): Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) approved label is not converted into Chinese and Spanish
- 05:58 PM Bug #15538 (Fixed with Hotfix): Email validation is not done during Supplier creation
- Verified
- 12:04 PM Bug #15538 (Resolved): Email validation is not done during Supplier creation
- 11:11 AM Bug #15538 (In Progress): Email validation is not done during Supplier creation
- 05:40 PM Bug #15514 (Fixed with Hotfix): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 11:26 AM Bug #15514 (Resolved): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 05:39 PM Bug #15265 (Fixed with Hotfix): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- Issue fixed and verified in cy 4
- 05:36 PM Bug #15552 (Fixed with Hotfix): On mouse hovering the production item, parent name is showing as "null".
- Issue Fixed
- 12:00 PM Bug #15552 (Resolved): On mouse hovering the production item, parent name is showing as "null".
- 11:11 AM Bug #15552 (In Progress): On mouse hovering the production item, parent name is showing as "null".
- 05:36 PM Bug #15576 (Closed): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- 05:32 PM Bug #15540 (Resolved): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 05:31 PM Bug #15433 (Fixed with Hotfix): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- Fixed with Hotfix
- 12:53 PM Bug #15433 (Resolved): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- 11:39 AM Bug #15433 (Not Resolved): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- 11:38 AM Bug #15433: Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- Multi site:After set also, it is not showing.Ref screen shot.
- 05:30 PM Bug #15520 (In Progress): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 05:25 PM Bug #15326 (Closed): Copy location: Copy location is not working when "ppap" is checked
- 05:25 PM Bug #15326 (Yet to Verify): Copy location: Copy location is not working when "ppap" is checked
- Verified in build 4
- 12:21 PM Bug #15326 (Resolved): Copy location: Copy location is not working when "ppap" is checked
- 05:23 PM Bug #15471 (Resolved): VOC: While enter large word in VOC the alignment is not proper
- 05:16 PM Bug #15385 (Resolved): Utility Equipment: Need Equipment path details for Utility Equipment
- 05:15 PM Bug #15387 (Resolved): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- 04:43 PM Bug #15543 (Resolved): PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated(Requested yo delivered)
- 04:31 PM Bug #15571 (Open): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- 12:41 PM Bug #15571 (Closed): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showin...
- 04:31 PM Bug #15569 (Open): Tooptip should be proper while hovering he icon
- 12:23 PM Bug #15569 (Closed): Tooptip should be proper while hovering he icon
- Risk level setup page.
Supplier page - 04:01 PM Bug #15544 (Resolved): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- 11:11 AM Bug #15544 (In Progress): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- 03:48 PM Bug #15394: Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- Able to replicate
- 03:37 PM Bug #15513 (Fixed with Hotfix): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 03:36 PM Bug #15457 (Fixed with Hotfix): Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is scheduled in Site 2
- 03:36 PM Bug #15408 (Fixed with Hotfix): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- 03:36 PM Bug #15565 (Resolved): Tree Diagram: Edited requirement with large data, failure and requirements are overlapped
- 11:32 AM Bug #15565 (Open): Tree Diagram: Edited requirement with large data, failure and requirements are overlapped
- 03:35 PM Bug #15378 (Fixed with Hotfix): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 03:32 PM Bug #15284 (Fixed with Hotfix): ShowStopper: Non-ITAR User can able to access the ITAR PI Documents
- 03:32 PM Bug #15292 (Fixed with Hotfix): NON-ITAR Users: Users can able to Copy and Paste the ITAR PI Segments
- 03:32 PM Bug #15517 (Fixed with Hotfix): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 03:25 PM Bug #15511 (Resolved): Batch Download: When the ITAR document is downloaded by ITAR user, then the NON ITAR module admin can view the ITAR documents in downloadable form. Same for stitch document
- 03:01 PM Bug #15572: New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- Duplicate Issue #:15571
- 02:55 PM Bug #15572 (Resolved): New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- 02:55 PM Bug #15572 (Open): New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- 12:51 PM Bug #15572 (Closed): New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- 02:21 PM Bug #15546 (Resolved): TSR: While Adding functions in TSR the alignment is not proper
- 02:18 PM Bug #15570 (Open): TSR - Safety goal ID is not displayed in TSR Document
- 12:36 PM Bug #15570 (Closed): TSR - Safety goal ID is not displayed in TSR Document
- Safety goal ID is not displayed in TSR Document.
- 01:02 PM Bug #15342 (Not Resolved): Uppercase and lower case should be proper throughout site
- 01:01 PM Bug #15342: Uppercase and lower case should be proper throughout site
- 1) enable and disable should be proper. Enable and disable first letter should be small letter
2) Space between busi... - 12:57 PM Bug #15554 (Resolved): Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment
- 12:17 PM Bug #15493 (Resolved): Legend status not showing in https site
- 11:11 AM Bug #15493 (In Progress): Legend status not showing in https site
- 12:16 PM Bug #15558 (In Progress): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 11:32 AM Bug #15558 (Open): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 12:14 PM Bug #15405 (Resolved): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- 12:08 PM Bug #15524 (Resolved): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- 11:11 AM Bug #15524 (In Progress): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- 12:06 PM Bug #15446 (Resolved): BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel
- 11:11 AM Bug #15446 (In Progress): BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel
- 12:05 PM Bug #15526 (Resolved): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- 11:11 AM Bug #15526 (In Progress): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- 12:04 PM Bug #15548 (Resolved): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- 11:11 AM Bug #15548 (In Progress): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- 12:00 PM Bug #15551 (Resolved): Need commodity,system and Subsystem field to be listed in the part details screen.
- 11:11 AM Bug #15551 (In Progress): Need commodity,system and Subsystem field to be listed in the part details screen.
- 11:48 AM Bug #15555 (Resolved): Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- 11:32 AM Bug #15555 (Open): Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- 11:43 AM Bug #15568 (Resolved): Server error is displayed while publishing the document Using Manufacturing Report
- 11:32 AM Bug #15568 (Open): Server error is displayed while publishing the document Using Manufacturing Report
- 11:39 AM Bug #15364: Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- Able to replicate the Issue in Cycle 4.
- 11:35 AM Bug #15536 (Fixed with Hotfix): Multi site: Risk level is not able to set because popup is missing
- Need to verify in next build.
- 11:32 AM Bug #15566 (Open): Created a Escalation Route with special character given in the description field. in the listing it is showing as route name , description and site value incorrectly. Not able to open the route also for editing.
- 11:32 AM Suggestion #15564 (Open): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- 11:32 AM Bug #15563 (Open): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- 11:32 AM Bug #15562 (Open): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized"
- 11:32 AM Bug #15560 (Open): Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
- 11:32 AM Bug #15559 (Open): Tree Diagram: Edited requirement displayed outside the element Box
- 11:28 AM Bug #15459 (Fixed with Hotfix): Effectiveness -> When Verified is no, below validation and effectiveness should be disable
- Verified as Hotfix
- 11:26 AM Bug #15534 (Fixed with Hotfix): Multi site: Supplier is not listing.Showstopper for multi site.
- Verified as Hot fix in build 4
- 11:22 AM Bug #15499 (Resolved): EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- not able to replicate
- 11:21 AM Bug #15550 (Fixed with Hotfix): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- Verified as hot fix
01/21/2020
- 08:23 PM Bug #15539 (Resolved): Block Diagram: color is not applied and its not working in Show Interface Type
- 07:49 PM Bug #15568 (Closed): Server error is displayed while publishing the document Using Manufacturing Report
- Server error is displayed while publishing the document (Manufacturing Report)
- 07:39 PM Bug #15567 (Closed): Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- 07:23 PM Bug #15464 (Yet to Verify): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 07:23 PM Bug #15431 (Yet to Verify): Report -> Audit - Repeat Non Conformance -> The graph is showing OFI data. Ex: Auditor identified one NC + One OFI by using same Non Conformity data"
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 07:21 PM Bug #14399 (Closed): Breakdown Work order: if the duration is exceeded for completing the BD WO, the escalation mail is not getting generated.
- 07:02 PM Bug #15432 (Closed): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- 07:01 PM Bug #15432: Auditee->After submit the car form , automatically form should close or else i can able to edit.
- Verified in Build 4
- 06:33 PM Bug #15566 (Closed): Created a Escalation Route with special character given in the description field. in the listing it is showing as route name , description and site value incorrectly. Not able to open the route also for editing.
- Created a Escalation Route with special character given in the description field. in the listing it is showing as rou...
- 06:32 PM Suggestion #15366 (Closed): PM Supervisor and PM Calendar(Equipment and Die) --> If user tries to draft the entered details, the system should not display the alert message to enter the actual date and time details.
- 06:31 PM Bug #15443: Report Issues : Please refer the description
- Adding few more Issues
Capture history : Save,Delete and Update not working
Checkpoint : After saving the report,... - 06:26 PM Bug #15451: Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 06:26 PM Bug #15451 (Yet to Verify): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- 06:25 PM Bug #15461 (Not Resolved): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- 06:23 PM Bug #15565 (Closed): Tree Diagram: Edited requirement with large data, failure and requirements are overlapped
- When editing the requirements in tree diagram using right click options
And while entering the large data, the edi... - 06:16 PM Suggestion #15564 (Closed): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- 06:15 PM Bug #15436 (Not Resolved): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- Error message is not displayed. But data is not displayed
- 06:12 PM Bug #15563 (Closed): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not a...
- 06:05 PM Bug #15449 (Closed): Report -> Audit Schedule Adherence -> Error message displayed when try to view the report by using "Custom" as time period
- 06:03 PM Bug #15390 (Not Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 1. Deadline violated and closed out status is missing
- 05:51 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 05:48 PM Bug #15480 (Closed): LPA: view Checklist score page displays blank though score value is available
- 05:39 PM Bug #15415 (Closed): Report -> Audit Schedule Adherence -> The entity filter is not showing the data based on site selection
- 05:36 PM Bug #15416 (Closed): Report -> Auditor Utilization -> Site filter has to display before entity filter like other reports
- 05:34 PM Bug #15422 (Yet to Verify): Report -> Auditor Utilization -> Wrong Count is displayed for an auditor utilized hrs
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 05:33 PM Bug #15423: Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 05:13 PM Bug #15423 (Yet to Verify): Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #: )
- 05:29 PM Bug #15499: EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- Not ale to replcate issues
- 05:28 PM Bug #15504 (Resolved): Route: On entering the existing route name and create a new route, system shows saved successfully and the new route screen shows the form w/o any data
- 05:20 PM Bug #15562 (Closed): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized"
- Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not...
- 05:19 PM Bug #15507 (Resolved): New Draft Request: By default draft requester should be the draft viewer. The draft viewer is not taken when selecting draft viewers and checked ITAR compliance and unchecked it and continue(pls check desc as well)
- 05:18 PM Bug #15413 (Closed): Imported Equipment from TPM is not listing in Audit pro where as after providing TPM rights to Audit pro User it is listing and still equipment list even after TPM rights are removed to Audit pro User
- 05:17 PM Bug #15521 (Resolved): Document Mgmt:For a particular folder FCPA, route link is not displayed
- 05:16 PM Bug #15522 (Resolved): Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown, but it shows assign by admin in doc mgmt route link dropdown
- 05:16 PM Bug #15523 (Resolved): ITAR document is going to NON ITAR Approver. PFB the scenario
- 05:15 PM Bug #15547 (Resolved): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 05:15 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- change the status to TBD
- 05:14 PM Bug #15557 (Closed): Checklist: While import the checklist, Session has expired
- Audit Topic not included in checklist template. After including this, checklist import is working
- 05:10 PM Bug #15557 (Resolved): Checklist: While import the checklist, Session has expired
- 05:10 PM Bug #15557 (Open): Checklist: While import the checklist, Session has expired
- Error in Excel Format. Not an issue
- 03:28 PM Bug #15557 (Closed): Checklist: While import the checklist, Session has expired
- Checklist: While import the checklist, Session has expired
- 05:12 PM Bug #15466 (Closed): Report -> Auditor Utilization -> Error message displayed when try to view the report by using "Custom" as time period
- Error message not displayed
- 05:12 PM Bug #15535 (Resolved): Document: GIF document is viewed as Image
- working as expected
- 05:11 PM Bug #15532 (Resolved): Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document change request in admin actions.Also the NONITAR module admin can able to modify/bypass the approvers from admin action for an ITAR document
- not an issue.can nor revoke admin access for itar
- 05:08 PM Bug #15533 (Resolved): Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to set the existing download name for newly downloaded documents
- not an issue working as expected
- 05:07 PM Bug #15418 (Not Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- Deadline audits are not displayed
- 05:05 PM Bug #15560: Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
- issue not clear
- 04:36 PM Bug #15560 (Closed): Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
- Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date...
- 04:57 PM Bug #15561 (Closed): Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) approved label is not converted into Chinese and Spanish
- Issue 1: Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) a...
- 04:56 PM Bug #15519 (Resolved): EFC Tree: Function Flow down element is displayed in EFC Tree, When nothing is mapped on It
- 04:46 PM Bug #15414 (Closed): LPA : Layers->Auditor selection is displaying all the users in 1st layer but where as from Layer 2 on words displays as Users having to Access to auditors
- Verified in Sp_925 Cy-4 Build and closed
- 04:11 PM Bug #15559 (Closed): Tree Diagram: Edited requirement displayed outside the element Box
- > When editing the requirements in tree diagram using right click options
> And while entering the data on next li... - 04:02 PM Bug #15558 (Closed): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for al...
- 03:48 PM Bug #15468 (Fixed with Hotfix): Audit Program -> Server error displayed when clicking on "delete" button
- 03:31 PM Bug #15410 (Closed): SP906.1 Hotfix -> SB-191110618 - Category and requested by field in perform audit
- 03:29 PM Bug #15382 (Resolved): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- 03:07 PM Bug #15383 (Resolved): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 01:57 PM Bug #15383 (In Progress): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 03:02 PM Bug #15555 (Closed): Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- 01:09 PM Bug #15550 (Resolved): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- 09:45 AM Bug #15550 (Open): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- 12:03 PM Bug #15545 (In Progress): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 11:51 AM Bug #15265 (Resolved): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- 09:45 AM Bug #15554 (Open): Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment
- 09:45 AM Bug #15553 (Open): Multi langugage
- 09:45 AM Bug #15552 (Open): On mouse hovering the production item, parent name is showing as "null".
- 09:45 AM Bug #15551 (Open): Need commodity,system and Subsystem field to be listed in the part details screen.
01/20/2020
- 09:09 PM Bug #15432 (Resolved): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- 03:33 PM Bug #15432 (Not Fixed with Hotfix): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- not fixed in build
- 03:22 PM Bug #15432: Auditee->After submit the car form , automatically form should close or else i can able to edit.
- Still the issue occur
- 07:12 PM Bug #15502 (Resolved): (Multi Date)Design and Process VDA - When the Date format is changed, Following issues occurs.(Refer Description)
- 07:08 PM Bug #15391 (In Progress): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 02:22 PM Bug #15391 (Not Fixed with Hotfix): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 02:21 PM Bug #15391: Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- Still the issue occur in build 4
- 07:03 PM Bug #15529 (Resolved): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- 01:14 PM Bug #15529 (Open): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- 07:02 PM Bug #15468 (Resolved): Audit Program -> Server error displayed when clicking on "delete" button
- 02:20 PM Bug #15468 (Not Fixed with Hotfix): Audit Program -> Server error displayed when clicking on "delete" button
- Still the issue occur in build 4
- 06:46 PM Bug #15554 (Closed): Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment
- Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment. It displays error m...
- 06:45 PM Bug #15531 (Resolved): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- 01:14 PM Bug #15531 (Open): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- 06:44 PM Bug #15553 (Closed): Multi langugage
- Issue 1:Social Media--> Default layout--> Status for PM, BD, Spare part maintenance and Request status is not convert...
- 05:22 PM Bug #15508 (Resolved): Design and Process VDA - Dates are not displayed as per Date format.(DD/MM/YYYY) (Refer Description)
- 05:21 PM Bug #15552 (Closed): On mouse hovering the production item, parent name is showing as "null".
- On mouse hovering the production item, parent name is showing as "null".
- 05:12 PM Bug #15551 (Closed): Need commodity,system and Subsystem field to be listed in the part details screen.
- Need commodity,system and Subsystem field to be listed in the part details screen.
- 05:05 PM Bug #15550 (Closed): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- Remove the "view project" option in Audit Administrator(Access Rights)
- 04:10 PM Bug #15438 (Resolved): Even After mapping KPIs to the Dashboard, clicking on it not displays the reports related to it.
- 04:02 PM Bug #15530 (Resolved): New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to auditee" Issue2:not able to view in "Click to view report" and also
- 01:14 PM Bug #15530 (Open): New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to auditee" Issue2:not able to view in "Click to view report" and also
- 03:44 PM Bug #15548 (Open): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- 03:39 PM Bug #15548 (Closed): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- 03:44 PM Bug #15547 (Open): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 03:32 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- IN AQUA pro module folder alone, the ITAR docs are visible to NON ITAR user, but when clicking on the doc, shows aler...
- 03:29 PM Bug #15547 (Closed): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing...
- 03:44 PM Bug #15546 (Open): TSR: While Adding functions in TSR the alignment is not proper
- 03:25 PM Bug #15546 (Closed): TSR: While Adding functions in TSR the alignment is not proper
- TSR: While Adding functions in TSR the alignment is not proper
Refer Screenshot - 03:44 PM Bug #15545 (Open): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 03:24 PM Bug #15545 (Closed): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations
... - 03:44 PM Bug #15544 (Open): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- 02:57 PM Bug #15544 (Closed): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- 03:44 PM Bug #15543 (Open): PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated(Requested yo delivered)
- 01:31 PM Bug #15543 (Closed): PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated(Requested yo delivered)
- PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated
- 03:43 PM Bug #15518 (Closed): Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
- 03:42 PM Bug #15518 (Fixed with Hotfix): Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
- 02:58 PM Bug #15518: Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
- Not anissues
- 03:42 PM Bug #15525 (Resolved): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- 01:14 PM Bug #15525 (Open): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- 03:42 PM Bug #15534 (Resolved): Multi site: Supplier is not listing.Showstopper for multi site.
- 01:14 PM Bug #15534 (Open): Multi site: Supplier is not listing.Showstopper for multi site.
- 12:04 PM Bug #15534 (Closed): Multi site: Supplier is not listing.Showstopper for multi site.
- Multi site: Supplier is not listing.Showstopper for multi site.
- 03:42 PM Bug #15536 (Resolved): Multi site: Risk level is not able to set because popup is missing
- it is not an issue when change the risk we show pop up. for initial setup we dont ask reason.
- 01:14 PM Bug #15536 (Open): Multi site: Risk level is not able to set because popup is missing
- 12:16 PM Bug #15536 (Closed): Multi site: Risk level is not able to set because popup is missing
- Multi site: Risk level is not able to set because popup is missing
- 03:14 PM Bug #15425 (Closed): Nc page-> While retrieve the NC details automatic the Attachment is displayed.
- Verified in build 4
- 03:13 PM Bug #13755 (Closed): Supplier contact person getting deleted instead of deactivating
- 03:12 PM Bug #15479 (Not Fixed with Hotfix): Project/ Program Unarchive is not working.
- 02:28 PM Bug #15228 (Closed): When trying to use View Source File of a ZIP file, it is renaming the file extension as PDF.
- Removed the view source file option for ZIP file type. Discussed with Sabu as well.CLosing the issue
- 02:22 PM Bug #15419 (Closed): Actual Audit-> Auditee name is not displayed properly
- Working fine in this build
- 01:23 PM Bug #15462 (Closed): Social Media: Planned Maintenance Extract pop up window--> Sort as ascending order--> When a supervisor tires to complete the workorder and clicking on ok button, it displays "server error"
- 01:14 PM Bug #15542 (Open): New Cummins VAM Report->Audit Status->New report is not displayed in audit status .pls find screen shot
- 01:00 PM Bug #15542 (Closed): New Cummins VAM Report->Audit Status->New report is not displayed in audit status .pls find screen shot
- New Cummins VAM Report->Audit Status->New report is not displayed in audit status
- 01:14 PM Bug #15540 (Open): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 12:40 PM Bug #15540 (Closed): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- Plant Configuration(Import): When tries to import the Utility type details, it showing error message. - Closed
- 01:14 PM Bug #15539 (Open): Block Diagram: color is not applied and its not working in Show Interface Type
- 12:39 PM Bug #15539 (Closed): Block Diagram: color is not applied and its not working in Show Interface Type
- Block Diagram: color is not applied and its not working in Show Interface Type
- 01:14 PM Bug #15538 (Open): Email validation is not done during Supplier creation
- 12:36 PM Bug #15538 (Closed): Email validation is not done during Supplier creation
- Email validation is not done during Supplier creation
1.Accepting invalid email id for the primary and secondary ema... - 01:14 PM Bug #15537 (Open): Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- 12:31 PM Bug #15537 (Closed): Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- 01:14 PM Bug #15535 (Open): Document: GIF document is viewed as Image
- 12:13 PM Bug #15535 (Closed): Document: GIF document is viewed as Image
- Document: GIF document is viewed as Image
- 01:14 PM Bug #15533 (Open): Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to set the existing download name for newly downloaded documents
- 01:14 PM Bug #15532 (Open): Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document change request in admin actions.Also the NONITAR module admin can able to modify/bypass the approvers from admin action for an ITAR document
- 01:14 PM Bug #15528 (Open): Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- 01:14 PM Bug #15527 (Open): TOC:When doing revision/deletion, Level tree should be displayed in LHS screen and the RHS should show action screen
- 01:14 PM Bug #15526 (Open): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- 01:14 PM Bug #15524 (Open): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- 01:14 PM Bug #15523 (Open): ITAR document is going to NON ITAR Approver. PFB the scenario
- 01:14 PM Bug #15522 (Open): Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown, but it shows assign by admin in doc mgmt route link dropdown
- 01:14 PM Bug #15521 (Open): Document Mgmt:For a particular folder FCPA, route link is not displayed
- 01:14 PM Bug #15512 (Open): Generate document URL is not working as expected, shows blank screen when pasting the URL. After sometime, it asks the user to open/Save in IE and opens the document in IE edge. NON ITAR user can view the ITAR document by using this link
- 01:14 PM Bug #15511 (Open): Batch Download: When the ITAR document is downloaded by ITAR user, then the NON ITAR module admin can view the ITAR documents in downloadable form. Same for stitch document
- 01:14 PM Bug #15507 (Open): New Draft Request: By default draft requester should be the draft viewer. The draft viewer is not taken when selecting draft viewers and checked ITAR compliance and unchecked it and continue(pls check desc as well)
- 01:14 PM Bug #15506 (Open): In New Concern page, after selecting the supplier, the supplier part number field is not showing the parts that are linked to the selected supplier
- 01:14 PM Bug #15503 (Open): Folder Management: Without selecting ITAR route, it should not allow the user to save the folder if the user checks EDIT ITAR route checkbox. Show alert message instead of allowing to save
- 01:00 PM Bug #15265 (Not Resolved): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- Remove Supplier prefix
- 12:59 PM Bug #15405 (Not Resolved): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- 12:58 PM Suggestion #15361 (Closed): Die: Cavity--> Need "Select" option as default
- 12:57 PM Bug #15385 (Not Resolved): Utility Equipment: Need Equipment path details for Utility Equipment
- 12:55 PM Suggestion #15386 (Closed): Equipment part and Die linkage: No need to displays the Non manufacturing line details in Equipment part and Equipment part die Linkage menu
- 12:44 PM Bug #15323 (In Progress): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 12:44 PM Bug #15382 (In Progress): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- 12:36 PM Bug #15394: Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- Not able to replicate
- 12:36 PM Bug #15452 (Closed): Supplier listing screen : when the user is not having the supplier module admin rights then do not display all the supplier to the users assigned in the groups.
- VERIFIED FROM PPAP TEAM
- 12:30 PM Bug #15387 (Not Resolved): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- 12:27 PM Bug #15388 (Closed): Problem Master: Root Cause category sorting is not working as expected.
- 11:49 AM Bug #15354 (Reopen): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 11:16 AM Bug #15497 (Resolved): Process VDA - Failure Analysis - While performing Skip Level Flow down it duplicates the Element
- 10:41 AM Bug #15364 (Resolved): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- in our discussion its not replicating and also need it occurs in some situation.we need to catch the scenario
01/17/2020
- 10:39 PM Bug #15443 (Resolved): Report Issues : Please refer the description
- 10:37 PM Bug #15443 (In Progress): Report Issues : Please refer the description
- 10:39 PM Bug #15378 (Resolved): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 10:25 PM Bug #15514 (In Progress): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 10:25 PM Bug #15514 (Open): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 09:17 PM Bug #15517 (Resolved): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 09:16 PM Bug #15517 (Open): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 07:01 PM Bug #15292 (Resolved): NON-ITAR Users: Users can able to Copy and Paste the ITAR PI Segments
- 07:01 PM Bug #15284 (Resolved): ShowStopper: Non-ITAR User can able to access the ITAR PI Documents
- 05:32 PM Bug #15533 (Closed): Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to set the existing download name for newly downloaded documents
- Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to se...
- 05:09 PM Bug #15532 (Closed): Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document change request in admin actions.Also the NONITAR module admin can able to modify/bypass the approvers from admin action for an ITAR document
- Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document chan...
- 04:05 PM Bug #15531 (Closed): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- 04:04 PM Bug #15530 (Closed): New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to auditee" Issue2:not able to view in "Click to view report" and also
- New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to aud...
- 04:01 PM Bug #15529 (Closed): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- 03:34 PM Bug #15528 (Closed): Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- 03:25 PM Bug #15527 (Closed): TOC:When doing revision/deletion, Level tree should be displayed in LHS screen and the RHS should show action screen
- When doing a change request from Search Result Page, after completion it re-directs to Actions page. The user is plan...
- 03:04 PM Bug #15408 (Resolved): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- 03:03 PM Bug #15526 (Closed): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need ...
- 03:03 PM Bug #15525 (Closed): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- 03:01 PM Bug #15524 (Closed): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- 03:00 PM Bug #15246 (Closed): There is no status(color) for tentative VAM audit once it is scheduled
- Working fine in CY4 925
- 03:00 PM Bug #15241 (Closed): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- Working fine in CY4 925
- 03:00 PM Bug #15240 (Closed): Risk value double digit not accepting
- Working fine in CY4 925
- 03:00 PM Bug #15257 (Closed): Supplier Template-Empty checkbox is listing (UI issue).Refer screen shot
- Working fine in CY4 925
- 02:59 PM Bug #15262 (Closed): Unable to add part as no add button is showing even after specifying all necessary details in supplier creation(imported supplier)
- Working fine in CY4 925
- 02:58 PM Bug #15278 (Closed): SAM audit-Audit status showing No NC by default though NC's has raised
- Working fine in CY4 925
- 02:58 PM Bug #15319 (Closed): Menu:Unwanted menus is displayed when user has only module access.
- Working fine in CY4 925
- 02:58 PM Bug #15472 (Resolved): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 02:57 PM Bug #15326 (Not Resolved): Copy location: Copy location is not working when "ppap" is checked
- issue reproducible in CY4 925,hence reopening this issue
- 02:57 PM Bug #15513 (Resolved): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 02:53 PM Bug #15357 (Closed): Import : Secondary Email address column is needed.
- Working fine in CY4 925
- 02:53 PM Bug #15392 (Closed): Part master-System and Subsystem against with commodity not loaded properly
- Working fine in CY4 925
- 02:53 PM Bug #15395 (Closed): No "Add" part button is available if secondary email ID for a supplier is specified
- Working fine in CY4 925
- 02:52 PM Bug #15396 (Closed): Secondary email ID has not saved while creating supplier or for an imported supplier
- Working fine in CY4 925
- 02:52 PM Bug #15401 (Closed): Unable to schedule VEM event audit.Clicking on Save&Add button no action.
- Working fine in CY4 925
- 02:50 PM Bug #15434 (Closed): Supplier-> Inner name and outer name does not match. Inside it is displayed as RFT Attachment
- Working fine in CY4 925
- 02:49 PM Bug #15435 (Closed): Supplier-> Delete option is not working in attachment
- Working fine in CY4 925.no del option instead single selection and attachment is allowed .can be override with new file
- 02:49 PM Bug #15437 (Closed): Supplier-> Site need to displayed in history and space between risk and level
- Working fine in CY4 925
- 02:48 PM Bug #15439 (Closed): Spelling mistake in supplier page
- Working fine in CY4 925
- 02:46 PM Bug #15442 (Closed): Supplier-> Search and deactivate is not working
- Working fine in CY4 925
- 02:46 PM Bug #15445 (Closed): Supplier Status Change History Report-> Order is incorrect in export excel.
- Working fine in CY4 925
- 02:43 PM Bug #15450 (Closed): Audit Validity Report->Blank page is displayed, when click the export button in Audit Validity Report.
- Working fine in CY4 925
- 01:05 PM Bug #15523 (Closed): ITAR document is going to NON ITAR Approver. PFB the scenario
- ITAR document is going to NON ITAR Approver. PFB the scenario
- 12:49 PM Bug #15522 (Closed): Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown, but it shows assign by admin in doc mgmt route link dropdown
- Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown...
- 12:43 PM Bug #15521 (Closed): Document Mgmt:For a particular folder FCPA, route link is not displayed
- Document Mgmt:For a particular folder FCPA, route link is not displayed
01/14/2020
- 06:23 PM Bug #15509 (Open): Design and Process VDA - Step 7 takes more time to load.(16 Seconds)
- 03:50 PM Bug #15509 (Closed): Design and Process VDA - Step 7 takes more time to load.(16 Seconds)
- Step 7 takes more time to load.(16 Seconds)
- 06:23 PM Bug #15508 (Open): Design and Process VDA - Dates are not displayed as per Date format.(DD/MM/YYYY) (Refer Description)
- 03:47 PM Bug #15508 (Closed): Design and Process VDA - Dates are not displayed as per Date format.(DD/MM/YYYY) (Refer Description)
- • 5T's date is not displayed based on the Date Format.
• In Tree view Dates added in Risk and Optimization are not... - 06:21 PM Bug #15520 (Open): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 05:24 PM Bug #15520 (Closed): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- • When selecting the Checkbox on the requirement Flow-down in Failure Tree, system selects Function/Requirement/Failu...
- 06:21 PM Bug #15519 (Open): EFC Tree: Function Flow down element is displayed in EFC Tree, When nothing is mapped on It
- 05:05 PM Bug #15519 (Closed): EFC Tree: Function Flow down element is displayed in EFC Tree, When nothing is mapped on It
- When Function Flow down is done in Requirement Tree, and entered in EFC Tree without mapping any elements or function...
- 06:21 PM Bug #15518 (Open): Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
- 06:14 PM Bug #15518: Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
- seems to be not an issue. Check it and close it accordingly
- 04:57 PM Bug #15518 (Closed): Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
- Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
Refer Screen... - 05:50 PM Bug #15382: Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- Change the Description in details
- 04:00 PM Bug #15382 (Not Resolved): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- 05:33 PM Bug #15403 (Closed): Over all route - If draft review is set for a project then document attachment is not working
- 05:32 PM Bug #15488: New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- After discussion with Sabu, it is being asked to fix
- 05:31 PM Bug #15488 (Open): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- 05:06 PM Bug #15454 (Closed): After attaching input via document viewer it is taking project manager as resource in the deliverable info by default.
- 04:58 PM Bug #15369 (Closed): Charts : By default all operations are displayed in chart header.Should display only the corresponding operation to which the characteristic belongs
- 04:57 PM Bug #15517 (Closed): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 04:52 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 02:51 PM Bug #15394 (Not Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 04:51 PM Bug #15378 (Not Fixed with Hotfix): Charts : Need to display the selected chart by-default while opening the chart from context menu
- Verified as hotfix but Issue still open in new build
- 04:44 PM Bug #15513 (In Progress): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 04:43 PM Bug #15513 (Open): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 04:25 PM Bug #15513 (Closed): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 04:41 PM Bug #15384 (Closed): Receiving/Final Inspection : If Characteristics class is not selected in Inspection Parameters for a characteristic ,that characteristic is not displayed in Inspection sheet
- 04:33 PM Bug #15444 (Closed): Multi-Site : CpCpkPpPpk Values entered in Site1 is displaying by default in Inspection sheet if the same Part is used in Site 2
- Closed in Cy4
- 04:31 PM Bug #15514 (Closed): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is i...
- 04:24 PM Bug #15512 (Closed): Generate document URL is not working as expected, shows blank screen when pasting the URL. After sometime, it asks the user to open/Save in IE and opens the document in IE edge. NON ITAR user can view the ITAR document by using this link
- Generate document URL is not working as expected, shows blank screen when pasting the URL. After sometime, it asks th...
- 04:10 PM Bug #15511 (Closed): Batch Download: When the ITAR document is downloaded by ITAR user, then the NON ITAR module admin can view the ITAR documents in downloadable form. Same for stitch document
- Batch Download: When the ITAR document is downloaded by ITAR user, then the NON ITAR module admin can view the ITAR d...
- 04:02 PM Bug #15323 (Reopen): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 03:58 PM Bug #15323 (Closed): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 03:10 PM Bug #15323 (Not Resolved): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 03:59 PM Bug #15346 (Closed): VOC - Flowdown/FlowUp is not working as expected. (Refer Description )
- 03:08 PM Bug #15346 (Not Resolved): VOC - Flowdown/FlowUp is not working as expected. (Refer Description )
- 03:49 PM Bug #15379 (Closed): Functional Analysis: DFMEA functions/Requirements are listed in Published document
- 03:48 PM Bug #15476 (Closed): HARA: when we click on Item-Element pop up the alignment of the HARA is not proper
- 03:45 PM Bug #15469 (Closed): Doc management: After selecting Rights for user and selecting Non ITAR user, all the documents including the ITAR is getting listed . It is not necessary to list the ITAR documents while setting rights for NON ITAR User .
- As discussed with Sabu, it will be working like this, will change if customer asks
- 03:45 PM Bug #15474 (Closed): TOC : While the Non ITAR user login and view the level (with full access in Groups rights) with only ITAR documents TOC displays no Document found . Instead the level can be disable .
- As discussed with Sabu, it will be working like this, will change if customer asks
- 03:44 PM Bug #15483 (Yet to Verify): HTTPS: Admin actions: Pending doc drafts shows the wrong count in LHS
- waiting or https environment
- 03:44 PM Bug #15484 (Closed): Folder Management: On selecting the route name with <Tst> and closing the route selection Pop up , before saving the selected Route is not displayed . Only after clicking on save the selected Route getting displayed
- closed in CY4
- 03:35 PM Bug #15228 (Yet to Verify): When trying to use View Source File of a ZIP file, it is renaming the file extension as PDF.
- 03:33 PM Bug #15487 (Closed): Document management > Document Integration > While Non ITAR user tries to Integrated doc from one level ( With ITAR and Non ITAR Doc) ,the level lists all the ITAR doc too. The ITAR should not list for NON ITAR user.
- As discussed with SMitha, it will be working like this, will change if customer asks
- 03:14 PM Bug #15426 (Closed): IFM: the tool tip option displays the next element name while placing the pointer on elements
- 03:13 PM Bug #15428 (Closed): Tool tip option is not working except Publish for approval and Refresh in all pages
- 03:09 PM Bug #15321 (Closed): Block Diagram: while publish block diagram with approvals, it is not allowing to publish again even after the approver, approved the document
- 03:09 PM Bug #15504 (Open): Route: On entering the existing route name and create a new route, system shows saved successfully and the new route screen shows the form w/o any data
- 12:13 PM Bug #15504 (Closed): Route: On entering the existing route name and create a new route, system shows saved successfully and the new route screen shows the form w/o any data
- Route: On entering the existing route name and create a new route, system shows saved successfully and the new route ...
- 03:02 PM Bug #15400 (Closed): New Document request->The check box " Is ITAR compliance" can be kept little bit away from the Note so that it can be properly visible
- CLosed in Cy4
- 03:01 PM Bug #15490 (Closed): Folder management: In Tag selection >> Rename select button to Done
- Closed in cy4
- 03:00 PM Bug #15365 (Closed): CpCpkPpPpk values are not displaying in Inspection Sheet
- 02:59 PM Bug #15492 (Closed): HTTPS - Design VDA- Intent/Extent arrow is not changing in Diagrammatic view
- 02:57 PM Bug #15494 (Closed): HTTPS: Results and Documentation - Symbols for Project Name, Tool and Timing is not displayed in Step 7.
- 02:56 PM Bug #15507 (Closed): New Draft Request: By default draft requester should be the draft viewer. The draft viewer is not taken when selecting draft viewers and checked ITAR compliance and unchecked it and continue(pls check desc as well)
- New Draft Request: By default draft requester should be the draft viewer. The draft viewer is not taken when selectin...
- 02:56 PM Bug #15485 (Closed): EFC Tree: publish is not working in EFC tree diagram
- 02:55 PM Bug #15477 (Closed): HTTPS - Process VDA- Segment name remains the same even after changing the Production Item.
- 02:54 PM Bug #15362 (Closed): Receiving Inspection Scheduling : Shortage Qty taking negative values while performing update operation
- 02:54 PM Bug #15399 (Closed): Process VDA - Header for Edit cause and Delete Branch is not good. (Refer Description)
- 02:53 PM Bug #15402 (Closed): New Draft Request: Adding Non ITAR user along with ITAR user in Draft viewer and checking the ITAR compliance, Along with ITAR user getting removed.
- closed in cy4
- 02:52 PM Bug #15398 (Closed): Process VDA - Functional/Failure Analysis - Edit FourM done in Diagrammatic view is reflected in Tree view only after Refresh
- 02:52 PM Bug #15411 (Closed): Inprocess Inspection sheet is not opening if Production In-process status is enabled in IC Settings
- 02:51 PM Bug #15363 (Closed): Inspection Sheet : Inspection sheet is not opening if Inspector In/Out time is not provided
- 02:51 PM Bug #15430 (Closed): Production Inprocess : Scheduled operations getting duplicated in Inprocess Inspection screen
- 02:50 PM Bug #15463 (Closed): Request needing Approval - ITAR Doc - Reassign approval - User pop up lists Non ITAR user as well allowing to assign.
- closed in cy4
- 02:49 PM Bug #15393 (Closed): Design and Process VDA - JS error is displayed while opening Results and Documentation (Step 7)
- 02:47 PM Bug #15475 (Closed): Actions: Document due for Review - Alerts displays irrelevant message , while clicking on Continue without selecting any actions
- closed in cy4
- 02:46 PM Bug #15424 (Closed): Requirement Tree: While performing function flowdown, the tree diagram displays along with requirements
- 02:40 PM Bug #15481 (Closed): Route the Minimum number approval field displays wrong count.
- closed in cy4
- 02:37 PM Bug #15307 (Closed): When the ITAR document is moved from one folder to another folder for which ITAR route is not set, then the user can able to revise the ITAR Document w/o ITAR route
- closed in cy4
- 02:35 PM Bug #15383 (Not Resolved): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 02:28 PM Bug #15364 (Not Resolved): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 02:21 PM Bug #15389 (Closed): Folder Management: Once the Edit ITAR Route Options is checked , Not able to uncheck the option .
- Closed in Cy4
- 02:18 PM Bug #15412 (Closed): Document is not going to approval when the route option is set as Assign by admin
- closed in cy4
- 02:07 PM Bug #15440 (Closed): Customer Issue: Status filter is not working in All concern status page.
- 02:07 PM Bug #15417 (Closed): When user with Request rights Publish the document(ITAR)with level having route is not going for approval instead the published documents directly going for need Attachment
- closed in Cy4
- 01:47 PM Bug #15506 (Closed): In New Concern page, after selecting the supplier, the supplier part number field is not showing the parts that are linked to the selected supplier
- In New Concern page, after selecting the supplier, the supplier part number field is not showing the parts that are l...
- 01:03 PM Bug #15421 (Closed): Levels: Allowing to create same level name (sublevel) with different prefix
- closed in CY 4
- 01:00 PM Bug #15470 (Closed): Routes : Allowing to select Position based route for ITAR
- Closed in CY 4
- 12:56 PM Bug #15478 (Closed): Document due for review : On Adding document reviewer an clicking continue there is no response . The page goes blank. For both ITAR and NON ITAR
- closed in CY4
- 12:05 PM Bug #15503 (Closed): Folder Management: Without selecting ITAR route, it should not allow the user to save the folder if the user checks EDIT ITAR route checkbox. Show alert message instead of allowing to save
- Folder Management: Without selecting ITAR route, it should not allow the user to save the folder if the user checks E...
- 11:27 AM Bug #15491 (Resolved): Sort/Scrap/Rework qty is displaying for all Receiving/Final/Inprocess Inspection items in department worksheet
- 10:01 AM Bug #15293 (Closed): NON-ITAR Users: Users can able to access the Diagrams Tab
- 10:00 AM Bug #15295 (Closed): NON-ITAR Users: Users can able to Delete the ITAR PI
- 10:00 AM Bug #15295 (TBD): NON-ITAR Users: Users can able to Delete the ITAR PI
- This can able to restrict through the Security settings given to the group
- 09:57 AM Bug #15502 (Open): (Multi Date)Design and Process VDA - When the Date format is changed, Following issues occurs.(Refer Description)
- 09:57 AM Bug #15501 (Open): Report--> Gage study due report only need to display for husco.
01/13/2020
- 08:22 PM Bug #15323 (Resolved): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 07:54 PM Bug #15342 (Resolved): Uppercase and lower case should be proper throughout site
- 07:27 PM Bug #15426 (Resolved): IFM: the tool tip option displays the next element name while placing the pointer on elements
- 06:05 PM Bug #15426 (In Progress): IFM: the tool tip option displays the next element name while placing the pointer on elements
- 07:18 PM Bug #15393 (Resolved): Design and Process VDA - JS error is displayed while opening Results and Documentation (Step 7)
- 06:05 PM Bug #15393 (In Progress): Design and Process VDA - JS error is displayed while opening Results and Documentation (Step 7)
- 05:34 PM Bug #15502 (Closed): (Multi Date)Design and Process VDA - When the Date format is changed, Following issues occurs.(Refer Description)
- • Verifed in (DD/MM/YYYY) and (YYYY/MM/DD) Formats
• Date added in Risk and Optimization Popup is Not displayed in... - 05:16 PM Bug #15369 (Fixed with Hotfix): Charts : By default all operations are displayed in chart header.Should display only the corresponding operation to which the characteristic belongs
- 05:14 PM Bug #15378 (Fixed with Hotfix): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 05:14 PM Bug #15466 (Fixed with Hotfix): Report -> Auditor Utilization -> Error message displayed when try to view the report by using "Custom" as time period
- 05:13 PM Bug #15434 (Fixed with Hotfix): Supplier-> Inner name and outer name does not match. Inside it is displayed as RFT Attachment
- working as hotfix in cy3 925
- 05:13 PM Bug #15437 (Fixed with Hotfix): Supplier-> Site need to displayed in history and space between risk and level
- working as hotfix in cy3 925
- 05:12 PM Bug #15468 (Fixed with Hotfix): Audit Program -> Server error displayed when clicking on "delete" button
- Verified in cascade BD Inst 3
- 05:12 PM Bug #15435 (Fixed with Hotfix): Supplier-> Delete option is not working in attachment
- removed delete option.accepting single file as per fix
- 05:08 PM Bug #15501 (Closed): Report--> Gage study due report only need to display for husco.
- Report--> Gage study due report only need to display for husco.
- 05:05 PM Bug #15497 (Open): Process VDA - Failure Analysis - While performing Skip Level Flow down it duplicates the Element
- 03:08 PM Bug #15497 (Closed): Process VDA - Failure Analysis - While performing Skip Level Flow down it duplicates the Element
- While performing Skip Level Flow down from Test PI to Test 1.1 it duplicates the Element
Refer Screenshot - 05:03 PM Bug #15499 (Open): EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- 03:48 PM Bug #15499: EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- Refer Screenshot
- 03:46 PM Bug #15499 (Closed): EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Exte...
- 04:51 PM Bug #15409 (Resolved): About EWQIMS is not displaying Fully when clicked.
- 04:35 PM Bug #15488 (TBD): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- 04:35 PM Bug #15488 (Open): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- 03:22 PM Bug #15488 (Resolved): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- There is lot of hidden functionality and technical difficulty in the scenario if fixed will have impact in multi docu...
- 09:40 AM Bug #15488 (Open): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- 04:32 PM Bug #15442 (Fixed with Hotfix): Supplier-> Search and deactivate is not working
- working fine cy3 925
- 04:31 PM Bug #15447 (Fixed with Hotfix): Supplier-> New supplier-> View log-> Login as new user it has show the only the current history status not previous history some other user (supplier)
- working fine cy3 925
- 04:01 PM Bug #15385 (Resolved): Utility Equipment: Need Equipment path details for Utility Equipment
- 03:58 PM Bug #15425 (Fixed with Hotfix): Nc page-> While retrieve the NC details automatic the Attachment is displayed.
- 03:55 PM Bug #15419 (Fixed with Hotfix): Actual Audit-> Auditee name is not displayed properly
- 03:55 PM Bug #15432 (Fixed with Hotfix): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- 03:48 PM Bug #15490 (Resolved): Folder management: In Tag selection >> Rename select button to Done
- 09:40 AM Bug #15490 (Open): Folder management: In Tag selection >> Rename select button to Done
- 03:23 PM Suggestion #15386 (Resolved): Equipment part and Die linkage: No need to displays the Non manufacturing line details in Equipment part and Equipment part die Linkage menu
- 03:23 PM Bug #15391 (Fixed with Hotfix): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 03:09 PM Bug #15487 (Resolved): Document management > Document Integration > While Non ITAR user tries to Integrated doc from one level ( With ITAR and Non ITAR Doc) ,the level lists all the ITAR doc too. The ITAR should not list for NON ITAR user.
- not an issue
- 09:40 AM Bug #15487 (Open): Document management > Document Integration > While Non ITAR user tries to Integrated doc from one level ( With ITAR and Non ITAR Doc) ,the level lists all the ITAR doc too. The ITAR should not list for NON ITAR user.
- 02:51 PM Bug #15494 (Resolved): HTTPS: Results and Documentation - Symbols for Project Name, Tool and Timing is not displayed in Step 7.
- will not able to get this.so changing the status into resolved
- 02:01 PM Bug #15494 (Open): HTTPS: Results and Documentation - Symbols for Project Name, Tool and Timing is not displayed in Step 7.
- 01:05 PM Bug #15494 (Closed): HTTPS: Results and Documentation - Symbols for Project Name, Tool and Timing is not displayed in Step 7.
- Symbols for Project Name, Tool and Timing is not displayed in Step 7.
- 02:10 PM Suggestion #15366 (Resolved): PM Supervisor and PM Calendar(Equipment and Die) --> If user tries to draft the entered details, the system should not display the alert message to enter the actual date and time details.
- 02:10 PM Suggestion #15366: PM Supervisor and PM Calendar(Equipment and Die) --> If user tries to draft the entered details, the system should not display the alert message to enter the actual date and time details.
- Request spare part and select activity will be auto save. Actual start date will be validate for other reason so the ...
- 02:08 PM Bug #15387 (Resolved): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- Removed Cross symbol for better reading
- 02:05 PM Bug #15493 (Open): Legend status not showing in https site
- 11:43 AM Bug #15493 (Closed): Legend status not showing in https site
- Legend status not showing in https site
- 01:59 PM Bug #15450 (Fixed with Hotfix): Audit Validity Report->Blank page is displayed, when click the export button in Audit Validity Report.
- working fine cy3 925
- 01:41 PM Suggestion #15361 (Resolved): Die: Cavity--> Need "Select" option as default
- 01:38 PM Bug #15423 (Resolved): Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- 01:38 PM Bug #15422 (Resolved): Report -> Auditor Utilization -> Wrong Count is displayed for an auditor utilized hrs
- 01:22 PM Bug #14399 (Resolved): Breakdown Work order: if the duration is exceeded for completing the BD WO, the escalation mail is not getting generated.
- 01:15 PM Bug #15462 (Resolved): Social Media: Planned Maintenance Extract pop up window--> Sort as ascending order--> When a supervisor tires to complete the workorder and clicking on ok button, it displays "server error"
- 12:44 PM Bug #15440 (Resolved): Customer Issue: Status filter is not working in All concern status page.
- 12:31 PM Bug #15492 (Resolved): HTTPS - Design VDA- Intent/Extent arrow is not changing in Diagrammatic view
- 09:40 AM Bug #15492 (Open): HTTPS - Design VDA- Intent/Extent arrow is not changing in Diagrammatic view
- 12:29 PM Bug #15480 (Fixed with Hotfix): LPA: view Checklist score page displays blank though score value is available
- 12:29 PM Bug #15307 (Resolved): When the ITAR document is moved from one folder to another folder for which ITAR route is not set, then the user can able to revise the ITAR Document w/o ITAR route
- 12:28 PM Bug #15413 (Fixed with Hotfix): Imported Equipment from TPM is not listing in Audit pro where as after providing TPM rights to Audit pro User it is listing and still equipment list even after TPM rights are removed to Audit pro User
- 12:28 PM Bug #15414 (Fixed with Hotfix): LPA : Layers->Auditor selection is displaying all the users in 1st layer but where as from Layer 2 on words displays as Users having to Access to auditors
- 12:16 PM Bug #15483 (Resolved): HTTPS: Admin actions: Pending doc drafts shows the wrong count in LHS
- 09:40 AM Bug #15483 (Open): HTTPS: Admin actions: Pending doc drafts shows the wrong count in LHS
- 12:11 PM Bug #15363 (Fixed with Hotfix): Inspection Sheet : Inspection sheet is not opening if Inspector In/Out time is not provided
- 11:12 AM Bug #15363 (Resolved): Inspection Sheet : Inspection sheet is not opening if Inspector In/Out time is not provided
- 12:11 PM Bug #15365 (Fixed with Hotfix): CpCpkPpPpk values are not displaying in Inspection Sheet
- 12:10 PM Bug #15411 (Fixed with Hotfix): Inprocess Inspection sheet is not opening if Production In-process status is enabled in IC Settings
- 12:04 PM Bug #15384 (Fixed with Hotfix): Receiving/Final Inspection : If Characteristics class is not selected in Inspection Parameters for a characteristic ,that characteristic is not displayed in Inspection sheet
- 11:59 AM Bug #15478 (Resolved): Document due for review : On Adding document reviewer an clicking continue there is no response . The page goes blank. For both ITAR and NON ITAR
- 09:40 AM Bug #15478 (Open): Document due for review : On Adding document reviewer an clicking continue there is no response . The page goes blank. For both ITAR and NON ITAR
- 11:59 AM Bug #15228 (Resolved): When trying to use View Source File of a ZIP file, it is renaming the file extension as PDF.
- 09:40 AM Bug #15228 (Open): When trying to use View Source File of a ZIP file, it is renaming the file extension as PDF.
- 11:55 AM Bug #15388 (Resolved): Problem Master: Root Cause category sorting is not working as expected.
- 11:48 AM Bug #15430 (Fixed with Hotfix): Production Inprocess : Scheduled operations getting duplicated in Inprocess Inspection screen
- 11:41 AM Bug #15362 (Fixed with Hotfix): Receiving Inspection Scheduling : Shortage Qty taking negative values while performing update operation
- 11:37 AM Bug #15491 (In Progress): Sort/Scrap/Rework qty is displaying for all Receiving/Final/Inprocess Inspection items in department worksheet
- 11:12 AM Bug #15444 (Resolved): Multi-Site : CpCpkPpPpk Values entered in Site1 is displaying by default in Inspection sheet if the same Part is used in Site 2
- 11:12 AM Bug #15457 (Resolved): Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is scheduled in Site 2
- 11:04 AM Bug #15485 (Resolved): EFC Tree: publish is not working in EFC tree diagram
- 09:40 AM Bug #15485 (Open): EFC Tree: publish is not working in EFC tree diagram
- 10:46 AM Bug #15476 (Resolved): HARA: when we click on Item-Element pop up the alignment of the HARA is not proper
- 10:46 AM Bug #15382 (Resolved): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- 10:46 AM Bug #15346 (Resolved): VOC - Flowdown/FlowUp is not working as expected. (Refer Description )
- 10:21 AM Bug #8564 (Closed): Tab and Backspace functions are not working while entering data in Inspected value field in Mozilla Browser
- Verified in SP925
- 09:52 AM Bug #15454 (Fixed with Hotfix): After attaching input via document viewer it is taking project manager as resource in the deliverable info by default.
- 09:52 AM Bug #15453 (Fixed with Hotfix): Resource load across projects showing blank page
- 09:52 AM Bug #15403 (Fixed with Hotfix): Over all route - If draft review is set for a project then document attachment is not working
- 09:51 AM Bug #15479 (Fixed with Hotfix): Project/ Program Unarchive is not working.
- 09:40 AM Bug #15479 (Open): Project/ Program Unarchive is not working.
- 09:40 AM Bug #15471 (Open): VOC: While enter large word in VOC the alignment is not proper
01/12/2020
- 11:09 PM Bug #15452 (Resolved): Supplier listing screen : when the user is not having the supplier module admin rights then do not display all the supplier to the users assigned in the groups.
- 11:09 PM Bug #15435 (Resolved): Supplier-> Delete option is not working in attachment
- 11:08 PM Bug #13755 (Resolved): Supplier contact person getting deleted instead of deactivating
- 04:35 PM Bug #15477 (Resolved): HTTPS - Process VDA- Segment name remains the same even after changing the Production Item.
- 04:35 PM Bug #15428 (Resolved): Tool tip option is not working except Publish for approval and Refresh in all pages
- 10:52 AM Bug #15428 (In Progress): Tool tip option is not working except Publish for approval and Refresh in all pages
- 04:35 PM Bug #15399 (Resolved): Process VDA - Header for Edit cause and Delete Branch is not good. (Refer Description)
- 04:35 PM Bug #15398 (Resolved): Process VDA - Functional/Failure Analysis - Edit FourM done in Diagrammatic view is reflected in Tree view only after Refresh
- 04:35 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 04:35 PM Bug #15379 (Resolved): Functional Analysis: DFMEA functions/Requirements are listed in Published document
- 04:35 PM Bug #15364 (Resolved): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 04:35 PM Bug #15321 (Resolved): Block Diagram: while publish block diagram with approvals, it is not allowing to publish again even after the approver, approved the document
- 04:13 PM Bug #15383 (Resolved): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 04:13 PM Bug #15424 (Resolved): Requirement Tree: While performing function flowdown, the tree diagram displays along with requirements
- 03:58 PM Bug #15491 (Open): Sort/Scrap/Rework qty is displaying for all Receiving/Final/Inprocess Inspection items in department worksheet
- 03:31 PM Bug #15491 (Closed): Sort/Scrap/Rework qty is displaying for all Receiving/Final/Inprocess Inspection items in department worksheet
- Sort/Scrap/Rework qty is displaying for all Receiving / Final/ Inprocess Inspection items in department worksheet
- 03:56 PM Bug #15472 (In Progress): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 03:56 PM Bug #15472 (Open): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 03:55 PM Bug #14973 (Resolved): Receiving Inspection : Inspection entry pop-up is not loading for PIs having special characters in Invoice number
- 03:54 PM Bug #13275 (Resolved): Inspection parameters:Pagination and sorting is not working as expected in characteristics grid
- 03:53 PM Bug #8564 (Resolved): Tab and Backspace functions are not working while entering data in Inspected value field in Mozilla Browser
- 03:47 PM Bug #15492 (Closed): HTTPS - Design VDA- Intent/Extent arrow is not changing in Diagrammatic view
- Intent/Extent arrow is not changing in Diagrammatic view
- 03:22 PM Bug #15490 (Closed): Folder management: In Tag selection >> Rename select button to Done
- Folder management: In Tag selection >> Rename select button to Done
- 02:48 PM Bug #15488 (Closed): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the...
- 02:47 PM Bug #15487 (Closed): Document management > Document Integration > While Non ITAR user tries to Integrated doc from one level ( With ITAR and Non ITAR Doc) ,the level lists all the ITAR doc too. The ITAR should not list for NON ITAR user.
- Document management > Document Integration > While Non ITAR user tries to Integrated doc from one level ( With ITAR a...
- 02:35 PM Bug #15228: When trying to use View Source File of a ZIP file, it is renaming the file extension as PDF.
- Kindly fix this issue Jac
- 02:02 PM Bug #15274 (Closed): TOC: Need to differentiate ITAR and NON ITAR docs in TOC. Same in Attach From Doc Pro
- There is no difference in Attach from Doc Pro. But as of now we keep like this and will change if customer asks
- 09:55 AM Bug #15274 (Resolved): TOC: Need to differentiate ITAR and NON ITAR docs in TOC. Same in Attach From Doc Pro
- 12:19 PM Bug #15415 (Resolved): Report -> Audit Schedule Adherence -> The entity filter is not showing the data based on site selection
- 12:17 PM Bug #15416 (Resolved): Report -> Auditor Utilization -> Site filter has to display before entity filter like other reports
- 11:46 AM Bug #15391 (Resolved): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- Not able to replicate
- 10:54 AM Bug #15485 (Closed): EFC Tree: publish is not working in EFC tree diagram
- EFC Tree: publish is not working in EFC tree diagram
Refer Screenshot - 10:48 AM Bug #15484 (Resolved): Folder Management: On selecting the route name with <Tst> and closing the route selection Pop up , before saving the selected Route is not displayed . Only after clicking on save the selected Route getting displayed
- 09:40 AM Bug #15484 (Open): Folder Management: On selecting the route name with <Tst> and closing the route selection Pop up , before saving the selected Route is not displayed . Only after clicking on save the selected Route getting displayed
- 10:09 AM Bug #15481 (Resolved): Route the Minimum number approval field displays wrong count.
- 09:40 AM Bug #15481 (Open): Route the Minimum number approval field displays wrong count.
- 10:09 AM Bug #15475 (Resolved): Actions: Document due for Review - Alerts displays irrelevant message , while clicking on Continue without selecting any actions
- 09:40 AM Bug #15475 (Open): Actions: Document due for Review - Alerts displays irrelevant message , while clicking on Continue without selecting any actions
- 10:09 AM Bug #15470 (Resolved): Routes : Allowing to select Position based route for ITAR
- 09:40 AM Bug #15470 (Open): Routes : Allowing to select Position based route for ITAR
- 10:01 AM Bug #15474 (Resolved): TOC : While the Non ITAR user login and view the level (with full access in Groups rights) with only ITAR documents TOC displays no Document found . Instead the level can be disable .
- Working as expected
- 10:01 AM Bug #15474 (Open): TOC : While the Non ITAR user login and view the level (with full access in Groups rights) with only ITAR documents TOC displays no Document found . Instead the level can be disable .
- 10:00 AM Bug #15469 (Resolved): Doc management: After selecting Rights for user and selecting Non ITAR user, all the documents including the ITAR is getting listed . It is not necessary to list the ITAR documents while setting rights for NON ITAR User .
- 10:00 AM Bug #15469 (Open): Doc management: After selecting Rights for user and selecting Non ITAR user, all the documents including the ITAR is getting listed . It is not necessary to list the ITAR documents while setting rights for NON ITAR User .
- Working as expected
- 09:57 AM Bug #15402 (Resolved): New Draft Request: Adding Non ITAR user along with ITAR user in Draft viewer and checking the ITAR compliance, Along with ITAR user getting removed.
- We have cleared the textbox content cannot remove individual user here
- 09:40 AM Bug #15466 (Resolved): Report -> Auditor Utilization -> Error message displayed when try to view the report by using "Custom" as time period
- 09:05 AM Bug #15476 (Open): HARA: when we click on Item-Element pop up the alignment of the HARA is not proper
- 08:58 AM Bug #15480 (Resolved): LPA: view Checklist score page displays blank though score value is available
- 08:58 AM Bug #15480 (Open): LPA: view Checklist score page displays blank though score value is available
01/11/2020
- 06:33 PM Bug #15484 (Closed): Folder Management: On selecting the route name with <Tst> and closing the route selection Pop up , before saving the selected Route is not displayed . Only after clicking on save the selected Route getting displayed
- Folder Management: On selecting the route name with <Tst> and closing the route selection Pop up , before saving the ...
- 06:27 PM Bug #15483 (Closed): HTTPS: Admin actions: Pending doc drafts shows the wrong count in LHS
- HTTPS: Admin actions: Pending doc drafts shows the wrong count in LHS
- 06:09 PM Bug #15481 (Closed): Route the Minimum number approval field displays wrong count.
- Route the Minimum number approval field displays wrong count.
case:
1.Add approvals
2.by default "Is MAndatory... - 05:45 PM Bug #15480 (Closed): LPA: view Checklist score page displays blank though score value is available
- view Checklist score page displays blank though score value is available
- 05:41 PM Bug #15477 (In Progress): HTTPS - Process VDA- Segment name remains the same even after changing the Production Item.
- 05:41 PM Bug #15477 (Open): HTTPS - Process VDA- Segment name remains the same even after changing the Production Item.
- 05:36 PM Bug #15477 (Closed): HTTPS - Process VDA- Segment name remains the same even after changing the Production Item.
- If a New PI is selected, Process Segment remains the same.
- 05:40 PM Bug #15463 (Resolved): Request needing Approval - ITAR Doc - Reassign approval - User pop up lists Non ITAR user as well allowing to assign.
- 05:40 PM Bug #15479 (Closed): Project/ Program Unarchive is not working.
- Project/ Program Unarchive is not working.
- 05:37 PM Bug #15478 (Closed): Document due for review : On Adding document reviewer an clicking continue there is no response . The page goes blank. For both ITAR and NON ITAR
- Document due for review : On Adding document reviewer an clicking continue there is no response . The page goes blank...
- 05:36 PM Bug #15459 (Resolved): Effectiveness -> When Verified is no, below validation and effectiveness should be disable
- 05:31 PM Bug #15363 (In Progress): Inspection Sheet : Inspection sheet is not opening if Inspector In/Out time is not provided
- 05:25 PM Bug #15246 (Resolved): There is no status(color) for tentative VAM audit once it is scheduled
- 05:21 PM Bug #15444 (In Progress): Multi-Site : CpCpkPpPpk Values entered in Site1 is displaying by default in Inspection sheet if the same Part is used in Site 2
- 05:21 PM Bug #15444 (Not Resolved): Multi-Site : CpCpkPpPpk Values entered in Site1 is displaying by default in Inspection sheet if the same Part is used in Site 2
- 02:59 PM Bug #15444 (Resolved): Multi-Site : CpCpkPpPpk Values entered in Site1 is displaying by default in Inspection sheet if the same Part is used in Site 2
- 05:20 PM Bug #15476 (Closed): HARA: when we click on Item-Element pop up the alignment of the HARA is not proper
- HARA: when we click on Item-Element pop up, it pushes the data and the alignment of the HARA is not proper
Refer S... - 05:09 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 05:07 PM Bug #15475 (Closed): Actions: Document due for Review - Alerts displays irrelevant message , while clicking on Continue without selecting any actions
- Actions: Document due for Review - Alerts displays irrelevant message , while clicking on Continue without selecting ...
- 04:57 PM Bug #15474 (Closed): TOC : While the Non ITAR user login and view the level (with full access in Groups rights) with only ITAR documents TOC displays no Document found . Instead the level can be disable .
- TOC : While the Non ITAR user login and view the level ( who has full access in Groups rights) with only ITAR documen...
- 04:25 PM Bug #15410 (Resolved): SP906.1 Hotfix -> SB-191110618 - Category and requested by field in perform audit
- Kindly verify in next Build
- 04:16 PM Bug #15390 (Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 04:15 PM Bug #15390: Report -> Audit Repeat NC -> Various finding status is missing
- It shows based on Status
- 04:15 PM Bug #15431 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is showing OFI data. Ex: Auditor identified one NC + One OFI by using same Non Conformity data"
- 04:14 PM Bug #15461 (Resolved): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- Verified with QA
- 04:14 PM Bug #15464 (Resolved): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- 03:51 PM Bug #15472 (Closed): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 03:35 PM Bug #15471 (Closed): VOC: While enter large word in VOC the alignment is not proper
- VOC: While enter large word in VOC the alignment is not proper
Refer Screenshot - 03:11 PM Bug #15470 (Closed): Routes : Allowing to select Position based route for ITAR
- Routes : Allowing to select Position based route for ITAR
Case:
1.Select Position
2.Check the ITAR heck box ... - 11:17 AM Bug #15469 (Closed): Doc management: After selecting Rights for user and selecting Non ITAR user, all the documents including the ITAR is getting listed . It is not necessary to list the ITAR documents while setting rights for NON ITAR User .
- Doc management: After selecting Rights for user for NON ITAR user , All the documents including the ITAR is getting l...
- 10:56 AM Bug #15432 (Resolved): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- 10:16 AM Bug #15406 (Resolved): TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
- 09:50 AM Bug #15468 (Resolved): Audit Program -> Server error displayed when clicking on "delete" button
01/10/2020
- 10:33 PM Bug #15241 (Resolved): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- 10:28 PM Bug #15392 (Resolved): Part master-System and Subsystem against with commodity not loaded properly
- 10:06 PM Bug #15326 (Resolved): Copy location: Copy location is not working when "ppap" is checked
- 10:02 PM Bug #15356 (Resolved): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.
- 10:02 PM Bug #15357 (Resolved): Import : Secondary Email address column is needed.
- 10:01 PM Bug #15405 (Resolved): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- 09:59 PM Bug #15434 (Resolved): Supplier-> Inner name and outer name does not match. Inside it is displayed as RFT Attachment
- 09:58 PM Bug #15439 (Resolved): Spelling mistake in supplier page
- 11:30 AM Bug #15439: Spelling mistake in supplier page
- space risk and level
- 10:23 AM Bug #15439: Spelling mistake in supplier page
- Space beween Status and history
- 09:51 PM Bug #15437 (Resolved): Supplier-> Site need to displayed in history and space between risk and level
- 09:46 PM Bug #15445 (Resolved): Supplier Status Change History Report-> Order is incorrect in export excel.
- 03:17 PM Bug #15445 (Open): Supplier Status Change History Report-> Order is incorrect in export excel.
- 10:56 AM Bug #15445 (Closed): Supplier Status Change History Report-> Order is incorrect in export excel.
- Excel and website should be same
- 09:44 PM Bug #15447 (Resolved): Supplier-> New supplier-> View log-> Login as new user it has show the only the current history status not previous history some other user (supplier)
- 03:17 PM Bug #15447 (Open): Supplier-> New supplier-> View log-> Login as new user it has show the only the current history status not previous history some other user (supplier)
- 11:10 AM Bug #15447 (Closed): Supplier-> New supplier-> View log-> Login as new user it has show the only the current history status not previous history some other user (supplier)
- Supplier-> New supplier-> View log-> Login as new user it has show the only the current history status not previous h...
- 09:28 PM Bug #15257 (Resolved): Supplier Template-Empty checkbox is listing (UI issue).Refer screen shot
- 09:27 PM Bug #15262 (Resolved): Unable to add part as no add button is showing even after specifying all necessary details in supplier creation(imported supplier)
- 09:26 PM Bug #15395 (Resolved): No "Add" part button is available if secondary email ID for a supplier is specified
- 09:26 PM Bug #15396 (Resolved): Secondary email ID has not saved while creating supplier or for an imported supplier
- 07:14 PM Bug #15468 (Open): Audit Program -> Server error displayed when clicking on "delete" button
- 06:43 PM Bug #15468 (Closed): Audit Program -> Server error displayed when clicking on "delete" button
- Audit Program -> Server error displayed when clicking on "delete" button
- 07:14 PM Bug #15467 (Open): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance
- 06:37 PM Bug #15467 (Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance
- Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance
- 07:14 PM Bug #15466 (Open): Report -> Auditor Utilization -> Error message displayed when try to view the report by using "Custom" as time period
- 05:53 PM Bug #15466 (Closed): Report -> Auditor Utilization -> Error message displayed when try to view the report by using "Custom" as time period
- Report -> Auditor Utilization -> Error message displayed when try to view the report by using "Custom" as time period
- 07:14 PM Bug #15464 (Open): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- 05:22 PM Bug #15464 (Closed): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different...
- 07:14 PM Bug #15463 (Open): Request needing Approval - ITAR Doc - Reassign approval - User pop up lists Non ITAR user as well allowing to assign.
- 05:20 PM Bug #15463 (Closed): Request needing Approval - ITAR Doc - Reassign approval - User pop up lists Non ITAR user as well allowing to assign.
- Request needing Approval - ITAR Doc - Reassign approval - User pop up lists Non ITAR user as well allowing to assign.
- 07:14 PM Bug #15462 (Open): Social Media: Planned Maintenance Extract pop up window--> Sort as ascending order--> When a supervisor tires to complete the workorder and clicking on ok button, it displays "server error"
- 05:12 PM Bug #15462 (Closed): Social Media: Planned Maintenance Extract pop up window--> Sort as ascending order--> When a supervisor tires to complete the workorder and clicking on ok button, it displays "server error"
- Social Media: Planned Maintenance Extract pop up window--> Sort as ascending order--> When a supervisor tires to comp...
- 07:14 PM Bug #15461 (Open): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- 04:45 PM Bug #15461 (Closed): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- Report -> Repeat NC-> Multisite data's are not displayed for multisite users. But the same data is displayed for corp...
- 07:14 PM Bug #15459 (Open): Effectiveness -> When Verified is no, below validation and effectiveness should be disable
- 03:41 PM Bug #15459 (Closed): Effectiveness -> When Verified is no, below validation and effectiveness should be disable
- Effectiveness -> When Verified is no, below validation and effectiveness should be disable
- 05:33 PM Bug #15457 (In Progress): Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is scheduled in Site 2
- 05:29 PM Bug #15457 (Open): Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is scheduled in Site 2
- 03:36 PM Bug #15457 (Closed): Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is scheduled in Site 2
- Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is s...
- 05:33 PM Bug #15408 (In Progress): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- 04:42 PM Bug #15408: Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- In Charts while opening any of the charts from context menu there is no validation of 25 samples
But if we are openi... - 10:02 AM Bug #15408: Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- For Ex : there are 3 characteristics A,B,C
For Char A if the user is opening any charts its displaying values entere... - 09:46 AM Bug #15408 (Open): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- 05:27 PM Bug #15436 (Resolved): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 05:26 PM Bug #15444 (In Progress): Multi-Site : CpCpkPpPpk Values entered in Site1 is displaying by default in Inspection sheet if the same Part is used in Site 2
- 03:17 PM Bug #15444 (Open): Multi-Site : CpCpkPpPpk Values entered in Site1 is displaying by default in Inspection sheet if the same Part is used in Site 2
- 10:22 AM Bug #15444 (Closed): Multi-Site : CpCpkPpPpk Values entered in Site1 is displaying by default in Inspection sheet if the same Part is used in Site 2
- Multi-Site : CpCpkPpPpk Values entered in Site1 is displaying by default in Inspection sheet if the same Part is used...
- 05:20 PM Bug #15451 (Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- 03:17 PM Bug #15451 (Open): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- 11:53 AM Bug #15451 (Closed): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and we...
- 05:20 PM Bug #15449 (Resolved): Report -> Audit Schedule Adherence -> Error message displayed when try to view the report by using "Custom" as time period
- 03:17 PM Bug #15449 (Open): Report -> Audit Schedule Adherence -> Error message displayed when try to view the report by using "Custom" as time period
- 11:44 AM Bug #15449 (Closed): Report -> Audit Schedule Adherence -> Error message displayed when try to view the report by using "Custom" as time period
- Report -> Audit Schedule Adherence -> Error message displayed when try to view the report by using "Custom" as time p...
- 05:20 PM Bug #15418 (Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 04:40 PM Bug #15240 (Resolved): Risk value double digit not accepting
- 04:32 PM Bug #15450 (Resolved): Audit Validity Report->Blank page is displayed, when click the export button in Audit Validity Report.
- 03:17 PM Bug #15450 (Open): Audit Validity Report->Blank page is displayed, when click the export button in Audit Validity Report.
- 11:44 AM Bug #15450 (Closed): Audit Validity Report->Blank page is displayed, when click the export button in Audit Validity Report.
- Audit Validity Report->Blank page is displayed, when click the export button in Audit Validity Report.
- 04:17 PM Bug #15369 (Resolved): Charts : By default all operations are displayed in chart header.Should display only the corresponding operation to which the characteristic belongs
- 04:17 PM Bug #15362 (Resolved): Receiving Inspection Scheduling : Shortage Qty taking negative values while performing update operation
- 04:17 PM Bug #15378 (Resolved): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 09:50 AM Bug #15378 (Open): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 04:16 PM Bug #15411 (Resolved): Inprocess Inspection sheet is not opening if Production In-process status is enabled in IC Settings
- 09:45 AM Bug #15411 (Open): Inprocess Inspection sheet is not opening if Production In-process status is enabled in IC Settings
- 04:16 PM Bug #15365 (Resolved): CpCpkPpPpk values are not displaying in Inspection Sheet
- 04:05 PM Bug #15433 (Resolved): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- 03:49 PM Bug #15430 (Resolved): Production Inprocess : Scheduled operations getting duplicated in Inprocess Inspection screen
- 09:44 AM Bug #15430 (Open): Production Inprocess : Scheduled operations getting duplicated in Inprocess Inspection screen
- 03:17 PM Bug #15455 (Open): Attach task from template - "Select deliverable" button can be view only after scrolling
- 12:41 PM Bug #15455 (Closed): Attach task from template - "Select deliverable" button can be view only after scrolling
- Attach task from template - "Select deliverable" button can be view only after scrolling (CASCADE ONLY)
- 03:17 PM Bug #15454 (Open): After attaching input via document viewer it is taking project manager as resource in the deliverable info by default.
- 12:07 PM Bug #15454 (Closed): After attaching input via document viewer it is taking project manager as resource in the deliverable info by default.
- After attaching input via document viewer it is taking project manager as resource in the deliverable info by default...
- 03:17 PM Bug #15453 (Open): Resource load across projects showing blank page
- 12:02 PM Bug #15453 (Closed): Resource load across projects showing blank page
- Resource load across projects showing blank page.
The issue Occurs when resource is allocated to many projects/tasks... - 03:17 PM Bug #15452 (Open): Supplier listing screen : when the user is not having the supplier module admin rights then do not display all the supplier to the users assigned in the groups.
- 12:01 PM Bug #15452 (Closed): Supplier listing screen : when the user is not having the supplier module admin rights then do not display all the supplier to the users assigned in the groups.
- As per the discussion with "Bijoy" please find the change in supplier listing based on the rights.
Supplier listin... - 03:17 PM Bug #15446 (Open): BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel
- 11:00 AM Bug #15446 (Closed): BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel
- BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel
In APQP when the bom import is done wi... - 03:17 PM Bug #15443 (Open): Report Issues : Please refer the description
- 10:15 AM Bug #15443 (Closed): Report Issues : Please refer the description
- Reject Ratio and Supplier corrective actions : No Data is displaying
Worst Supplier report is not displaying in repo... - 03:17 PM Bug #15427 (Open): Actions: When a user tries to complete the Bias, Calibration, Calibration verification, Linearity, GRR and stability study through action screen, without entering the Approved and Remarks field it getting saved.
- 03:17 PM Bug #15402 (Open): New Draft Request: Adding Non ITAR user along with ITAR user in Draft viewer and checking the ITAR compliance, Along with ITAR user getting removed.
- 02:46 PM Bug #15442 (Resolved): Supplier-> Search and deactivate is not working
- 09:43 AM Bug #15442: Supplier-> Search and deactivate is not working
- * Primary address search only working
- 09:36 AM Bug #15442 (Open): Supplier-> Search and deactivate is not working
- 02:27 PM Bug #15267 (Closed): Equipment--> Activity-->CBM-->When edit and saved the specification, the value of min and max is not getting updated. once the page was refreshed, it showing properly
- 02:25 PM Bug #15354 (Closed): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 02:24 PM Bug #15358 (Closed): Equipment part and Equipment part die linkage: The Parts name should display in ascending order
- 02:22 PM Bug #15368 (Closed): PM Supervisor Calendar(Equipment and Die): System generating the WO for the deleted Equipment activity
- 02:01 PM Bug #15417 (Resolved): When user with Request rights Publish the document(ITAR)with level having route is not going for approval instead the published documents directly going for need Attachment
- 02:00 PM Bug #15417 (Open): When user with Request rights Publish the document(ITAR)with level having route is not going for approval instead the published documents directly going for need Attachment
- 02:00 PM Bug #15412 (Resolved): Document is not going to approval when the route option is set as Assign by admin
- 02:00 PM Bug #15412 (Open): Document is not going to approval when the route option is set as Assign by admin
- 02:00 PM Bug #15389 (Resolved): Folder Management: Once the Edit ITAR Route Options is checked , Not able to uncheck the option .
- 02:00 PM Bug #15389 (Open): Folder Management: Once the Edit ITAR Route Options is checked , Not able to uncheck the option .
- 01:59 PM Bug #15421 (Resolved): Levels: Allowing to create same level name (sublevel) with different prefix
- 01:59 PM Bug #15421 (Open): Levels: Allowing to create same level name (sublevel) with different prefix
- not able to replicate
- 01:07 PM Bug #15400 (Resolved): New Document request->The check box " Is ITAR compliance" can be kept little bit away from the Note so that it can be properly visible
- 11:14 AM Bug #15400 (Open): New Document request->The check box " Is ITAR compliance" can be kept little bit away from the Note so that it can be properly visible
- The checkbox is placed in the position as already discussed and finalized if there is a change please change the bug ...
- 12:37 PM Bug #15394 (In Progress): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 12:23 PM Bug #15413 (Resolved): Imported Equipment from TPM is not listing in Audit pro where as after providing TPM rights to Audit pro User it is listing and still equipment list even after TPM rights are removed to Audit pro User
- Issue not able to replicate, verified with QA
- 12:14 PM Bug #15384 (Resolved): Receiving/Final Inspection : If Characteristics class is not selected in Inspection Parameters for a characteristic ,that characteristic is not displayed in Inspection sheet
- given fix
- 09:49 AM Bug #15384 (Open): Receiving/Final Inspection : If Characteristics class is not selected in Inspection Parameters for a characteristic ,that characteristic is not displayed in Inspection sheet
- 11:57 AM Bug #15398 (In Progress): Process VDA - Functional/Failure Analysis - Edit FourM done in Diagrammatic view is reflected in Tree view only after Refresh
- 10:30 AM Bug #15399 (In Progress): Process VDA - Header for Edit cause and Delete Branch is not good. (Refer Description)
- 10:07 AM Bug #15282 (Closed): Functional block for Program BOM import
- Issue Fixed in cycle 3
- 09:35 AM Bug #15282 (Resolved): Functional block for Program BOM import
- 09:54 AM Bug #15409 (Open): About EWQIMS is not displaying Fully when clicked.
- 09:54 AM Bug #15397 (Open): Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed
- 09:53 AM Bug #15440 (Open): Customer Issue: Status filter is not working in All concern status page.
- 09:53 AM Bug #15388 (Open): Problem Master: Root Cause category sorting is not working as expected.
- 09:53 AM Bug #15387 (Open): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- 09:53 AM Suggestion #15386 (Open): Equipment part and Die linkage: No need to displays the Non manufacturing line details in Equipment part and Equipment part die Linkage menu
- 09:53 AM Bug #15385 (Open): Utility Equipment: Need Equipment path details for Utility Equipment
- 09:53 AM Bug #15426 (Open): IFM: the tool tip option displays the next element name while placing the pointer on elements
- 09:53 AM Bug #15428 (Open): Tool tip option is not working except Publish for approval and Refresh in all pages
- 09:52 AM Bug #15424 (Open): Requirement Tree: While performing function flowdown, the tree diagram displays along with requirements
- 09:29 AM Bug #15419 (Resolved): Actual Audit-> Auditee name is not displayed properly
- Cannot able to replicate while discussed with QA
01/09/2020
- 07:22 PM Bug #15413 (In Progress): Imported Equipment from TPM is not listing in Audit pro where as after providing TPM rights to Audit pro User it is listing and still equipment list even after TPM rights are removed to Audit pro User
- 06:59 PM Bug #15413 (Open): Imported Equipment from TPM is not listing in Audit pro where as after providing TPM rights to Audit pro User it is listing and still equipment list even after TPM rights are removed to Audit pro User
- 03:02 PM Bug #15413 (Closed): Imported Equipment from TPM is not listing in Audit pro where as after providing TPM rights to Audit pro User it is listing and still equipment list even after TPM rights are removed to Audit pro User
- Imported Equipment from TPM is not listing in Audit pro where as after providing TPM rights to Audit pro User it is l...
- 07:22 PM Bug #15425 (Resolved): Nc page-> While retrieve the NC details automatic the Attachment is displayed.
- 06:59 PM Bug #15425 (Open): Nc page-> While retrieve the NC details automatic the Attachment is displayed.
- 05:43 PM Bug #15425 (Resolved): Nc page-> While retrieve the NC details automatic the Attachment is displayed.
- 05:22 PM Bug #15425 (Open): Nc page-> While retrieve the NC details automatic the Attachment is displayed.
- 04:34 PM Bug #15425 (Closed): Nc page-> While retrieve the NC details automatic the Attachment is displayed.
- Nc page-> While retrieve the NC details automatic the Attachment is displayed.
- 07:22 PM Bug #15414 (Resolved): LPA : Layers->Auditor selection is displaying all the users in 1st layer but where as from Layer 2 on words displays as Users having to Access to auditors
- 06:59 PM Bug #15414 (Open): LPA : Layers->Auditor selection is displaying all the users in 1st layer but where as from Layer 2 on words displays as Users having to Access to auditors
- 03:06 PM Bug #15414 (Closed): LPA : Layers->Auditor selection is displaying all the users in 1st layer but where as from Layer 2 on words displays as Users having to Access to auditors
- LPA : Layers->Auditor selection is displaying all the users in 1st layer but where as from Layer 2 on words displays ...
- 07:05 PM Bug #15438 (Open): Even After mapping KPIs to the Dashboard, clicking on it not displays the reports related to it.
- 06:59 PM Bug #15438 (Closed): Even After mapping KPIs to the Dashboard, clicking on it not displays the reports related to it.
- 1. Even After mapping KPIs to the Dashboard, clicking on it not displays the reports related to it.
2. Cant able to ... - 07:05 PM Bug #15439 (Open): Spelling mistake in supplier page
- 07:00 PM Bug #15439 (Closed): Spelling mistake in supplier page
- Spelling mistake in supplier page
- 07:05 PM Bug #15437 (Open): Supplier-> Site need to displayed in history and space between risk and level
- 06:48 PM Bug #15437 (Closed): Supplier-> Site need to displayed in history and space between risk and level
- Supplier-> Site need to displayed in history and space between risk and level
- 07:05 PM Bug #15435 (Open): Supplier-> Delete option is not working in attachment
- 06:30 PM Bug #15435 (Closed): Supplier-> Delete option is not working in attachment
- Supplier-> Delete option is not working in attachment
Note: delete button should be disable mode still the file a... - 07:05 PM Bug #15434 (Open): Supplier-> Inner name and outer name does not match. Inside it is displayed as RFT Attachment
- 06:25 PM Bug #15434 (Closed): Supplier-> Inner name and outer name does not match. Inside it is displayed as RFT Attachment
- Supplier-> Inner name and outer does not match. Inside it is displayed as RFT Attachment
- 07:05 PM Bug #15433 (Open): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- 06:22 PM Bug #15433 (Closed): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- 07:05 PM Bug #15406 (Open): TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
- 01:55 PM Bug #15406 (Resolved): TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
- 07:05 PM Bug #15405 (Open): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- 12:51 PM Bug #15405 (Closed): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- 07:05 PM Bug #15396 (Open): Secondary email ID has not saved while creating supplier or for an imported supplier
- 10:14 AM Bug #15396 (Closed): Secondary email ID has not saved while creating supplier or for an imported supplier
- Secondary email ID has not saved while creating supplier or for an imported supplier
- 07:05 PM Bug #15395 (Open): No "Add" part button is available if secondary email ID for a supplier is specified
- 10:11 AM Bug #15395 (Closed): No "Add" part button is available if secondary email ID for a supplier is specified
- No "Add" part button is available if secondary email ID for a supplier is specified
- 07:05 PM Bug #15392 (Open): Part master-System and Subsystem against with commodity not loaded properly
- 07:04 PM Bug #15442 (Closed): Supplier-> Search and deactivate is not working
- Supplier-> Search and deactivate is not working
- 07:01 PM Bug #15440 (Closed): Customer Issue: Status filter is not working in All concern status page.
- Customer Issue: Status filter is not working in All concern status page.
- 06:59 PM Bug #15436 (Open): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 06:47 PM Bug #15436 (Closed): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business...
- 06:59 PM Bug #15432 (Open): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- 06:03 PM Bug #15432 (Closed): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- note: Copy option is enable, when manually refresh the page.
- 06:59 PM Bug #15431 (Open): Report -> Audit - Repeat Non Conformance -> The graph is showing OFI data. Ex: Auditor identified one NC + One OFI by using same Non Conformity data"
- 05:43 PM Bug #15431 (Closed): Report -> Audit - Repeat Non Conformance -> The graph is showing OFI data. Ex: Auditor identified one NC + One OFI by using same Non Conformity data"
- Reports -> Audit - Repeat Non Conformance -> The graph is showing OFI data. Ex: Auditor identified one NC + One OFI b...
- 06:59 PM Bug #15429 (Open): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 05:31 PM Bug #15429 (Closed): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- Reports -> Audit - Repeat Non Conformance ->
The graph is not showing the data based on Finding Status / Category -... - 06:59 PM Bug #15423 (Open): Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- 04:02 PM Bug #15423 (Closed): Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- 06:59 PM Bug #15422 (Open): Report -> Auditor Utilization -> Wrong Count is displayed for an auditor utilized hrs
- 03:57 PM Bug #15422 (Closed): Report -> Auditor Utilization -> Wrong Count is displayed for an auditor utilized hrs
- Report -> Auditor Utilization -> Wrong Count is displayed for an auditor utilized hrs
Ex: The user " Richard davi... - 06:59 PM Bug #15420 (Open): Report - Auditor Utilization -> Type -> Utilized and Not Utilized data's are same
- 03:41 PM Bug #15420 (Closed): Report - Auditor Utilization -> Type -> Utilized and Not Utilized data's are same
- Report - Auditor Utilization -> Type -> Utilized and Not Utilized data's are same when try to view the report
- 06:59 PM Bug #15419 (Open): Actual Audit-> Auditee name is not displayed properly
- 03:39 PM Bug #15419 (Closed): Actual Audit-> Auditee name is not displayed properly
- Actual Audit-> Auditee name is not displayed properly
- 06:59 PM Bug #15418 (Open): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 03:34 PM Bug #15418 (Closed): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 06:59 PM Bug #15416 (Open): Report -> Auditor Utilization -> Site filter has to display before entity filter like other reports
- 03:30 PM Bug #15416 (Closed): Report -> Auditor Utilization -> Site filter has to display before entity filter like other reports
- Report -> Auditor Utilization -> Site filter has to display before entity filter like other reports
- 06:59 PM Bug #15415 (Open): Report -> Audit Schedule Adherence -> The entity filter is not showing the data based on site selection
- 03:16 PM Bug #15415 (Closed): Report -> Audit Schedule Adherence -> The entity filter is not showing the data based on site selection
- Report -> Audit Schedule Adherence -> The entity filter is not showing the data based on site selection
Ex: The ... - 06:59 PM Bug #15410 (Open): SP906.1 Hotfix -> SB-191110618 - Category and requested by field in perform audit
- 02:37 PM Bug #15410 (Closed): SP906.1 Hotfix -> SB-191110618 - Category and requested by field in perform audit
- SP906.1 Hotfix -> SB-191110618 - Category and requested by field in perform audit
- 06:59 PM Bug #15391 (Open): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 06:59 PM Bug #15390 (Open): Report -> Audit Repeat NC -> Various finding status is missing
- 06:53 PM Bug #15403 (Open): Over all route - If draft review is set for a project then document attachment is not working
- 12:43 PM Bug #15403 (Closed): Over all route - If draft review is set for a project then document attachment is not working
- Over all route -
1.If draft review set then document attachment is not working (input/output/additional) (Blank and... - 06:16 PM Bug #15327 (Closed): (Existing db)Assign Route: The site details is not showing in the site field
- 06:13 PM Bug #15371 (Closed): Equipment and Die Skill matrix: Profile picture of the user is not showing properly in Equipment and Die Skill matrix
- 06:12 PM Bug #15367 (Closed): Operators : Unable to perform delete operation
- Closed in Cy3
- 06:00 PM Bug #15393 (Open): Design and Process VDA - JS error is displayed while opening Results and Documentation (Step 7)
- 09:54 AM Bug #15393 (Closed): Design and Process VDA - JS error is displayed while opening Results and Documentation (Step 7)
- JS error is displayed while opening Results and Documentation (Step 7)
- 06:00 PM Bug #15394 (Open): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 10:06 AM Bug #15394 (Closed): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 05:59 PM Bug #15398 (Open): Process VDA - Functional/Failure Analysis - Edit FourM done in Diagrammatic view is reflected in Tree view only after Refresh
- 10:24 AM Bug #15398 (Closed): Process VDA - Functional/Failure Analysis - Edit FourM done in Diagrammatic view is reflected in Tree view only after Refresh
- Edit FourM done in Diagrammatic view is reflected in Tree view only after Refresh
- 05:58 PM Bug #15399 (Open): Process VDA - Header for Edit cause and Delete Branch is not good. (Refer Description)
- 10:35 AM Bug #15399 (Closed): Process VDA - Header for Edit cause and Delete Branch is not good. (Refer Description)
- • Header is displayed as "Add Edit Direct Cause "
Expected: Can be displayed as "Edit Cause"
• Alert for Delete B... - 05:54 PM Bug #15365 (Not Resolved): CpCpkPpPpk values are not displaying in Inspection Sheet
- CpCpkPpPpk values are not displaying in Inprocess Inspection sheet
- 05:39 PM Bug #15430 (Closed): Production Inprocess : Scheduled operations getting duplicated in Inprocess Inspection screen
- Production Inprocess : Scheduled operations getting duplicated in Inprocess Inspection screen
- 05:22 PM Bug #15428 (Closed): Tool tip option is not working except Publish for approval and Refresh in all pages
- Tool tip option is not working except Publish for approval and Refresh in all pages
- 05:21 PM Bug #15401: Unable to schedule VEM event audit.Clicking on Save&Add button no action.
- ignore comments
- 05:20 PM Bug #15401 (Resolved): Unable to schedule VEM event audit.Clicking on Save&Add button no action.
- 04:46 PM Bug #15401 (Not Resolved): Unable to schedule VEM event audit.Clicking on Save&Add button no action.
- check for routine audit.
- 03:35 PM Bug #15401 (Resolved): Unable to schedule VEM event audit.Clicking on Save&Add button no action.
- 03:34 PM Bug #15401 (Open): Unable to schedule VEM event audit.Clicking on Save&Add button no action.
- Not an issue. Audit program segment is assigned monthly. Refer screenshot
- 11:43 AM Bug #15401 (Closed): Unable to schedule VEM event audit.Clicking on Save&Add button no action.
- Unable to schedule VEM event audit.Clicking on Save&Add button no action.
- 05:17 PM Bug #15364 (In Progress): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 05:16 PM Bug #15427 (Closed): Actions: When a user tries to complete the Bias, Calibration, Calibration verification, Linearity, GRR and stability study through action screen, without entering the Approved and Remarks field it getting saved.
- Actions: When a user tries to complete the Bias, Calibration, Calibration verification, Linearity, GRR and stability ...
- 05:07 PM Bug #15316 (Closed): Audit Status -> Audit Report (Template1) -> IMPROVEMENTS SUGGESTED IN THE SYSTEM field -> The OFI category is not showing the data based on Category
- 04:36 PM Bug #15316 (Reopen): Audit Status -> Audit Report (Template1) -> IMPROVEMENTS SUGGESTED IN THE SYSTEM field -> The OFI category is not showing the data based on Category
- Not working for multisite
- 02:24 PM Bug #15316 (Closed): Audit Status -> Audit Report (Template1) -> IMPROVEMENTS SUGGESTED IN THE SYSTEM field -> The OFI category is not showing the data based on Category
- 05:01 PM Bug #15426 (Closed): IFM: the tool tip option displays the next element name while placing the pointer on elements
- When mouse-over on elements in IFM the tool tip option displays the next element name while placing the pointer.
R... - 04:46 PM Bug #15346 (In Progress): VOC - Flowdown/FlowUp is not working as expected. (Refer Description )
- 04:45 PM Bug #15323 (In Progress): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 12:42 PM Bug #15323 (Not Resolved): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- refer screenshot
- 04:44 PM Bug #15369 (Not Resolved): Charts : By default all operations are displayed in chart header.Should display only the corresponding operation to which the characteristic belongs
- 04:44 PM Bug #15271 (Closed): Supplier Contact-Issue 1:No action On clicking supplier contact , Issue 2:No option (create,search,deactivae) nothing is working
- working fine in cy3-925
- 04:43 PM Bug #15268 (Closed): Part tree load by System shows Default.refer screen shot
- working fine in cy3-925
- 04:43 PM Bug #15264 (Closed): Legend Status gets disappeared and no part details is showing after creating supplier (given all mandatory fields) .This issue only for supplier which is not imported
- working fine in cy3-925
- 04:42 PM Bug #15261 (Closed): Part master screen->Loading is keep on displaying.refer screen shot
- working fine in cy3-925
- 04:42 PM Bug #15259 (Closed): Part Master-Label missing for System,subsystem
- working fine in cy3-925
- 04:42 PM Bug #15273 (Closed): Imported Supplier-Registration not getting completed even though specifying all mandatory fields
- working fine in cy3-925
- 04:41 PM Bug #15281 (Closed): Server error on clicking "Submit to Auditee" button for SAM audit
- working fine in cy3-925
- 04:40 PM Bug #15246: There is no status(color) for tentative VAM audit once it is scheduled
- Moving from Supplier management project->SP921(issue dependency) to SP925
- 04:40 PM Bug #15241: Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- Moving from Supplier management project->SP921(issue dependency) to SP925
- 04:40 PM Bug #15240: Risk value double digit not accepting
- Moving from Supplier management project->SP921(issue dependency) to SP925
- 04:03 PM Bug #15424 (Closed): Requirement Tree: While performing function flowdown, the tree diagram displays along with requirements
- While performing function flow-down in requirement tree, the tree diagram displays along with requirements.
But th... - 03:48 PM Bug #15298 (Closed): ITAR Route: AQuAPro Publish for the ITAR Route is not waiting for the Approvers its allowing for Auto-Publish Approval
- 03:45 PM Bug #15421 (Closed): Levels: Allowing to create same level name (sublevel) with different prefix
- Levels: Allowing to create same level name (sublevel) with different prefix
- 03:43 PM Bug #15305 (Closed): Route: Publishing the AQuAPro ITAR PI in the Level which having ITAR & NON-ITAR Route, By Default its taking the NON-ITAR Route
- 03:35 PM Bug #15294 (Closed): Need to change the alert for approved data selection - "Please select approved date."
- 03:34 PM Bug #15279 (Closed): Template to Project Conversion , Project to template conversion- Not working - Showing Undefined error.
- 03:32 PM Bug #15417 (Closed): When user with Request rights Publish the document(ITAR)with level having route is not going for approval instead the published documents directly going for need Attachment
- When user with Request rights Publish the document(ITAR)with level having route is not going for approval instead the...
- 03:10 PM Bug #15322 (Closed): Copper Standard Issue: In Main & Main2 D/PFMEA, Multi-Select Issues in the Control Methods Column (Preventive and Detective Controls)
- 03:04 PM Bug #15372 (Closed): Inprocess Inspection : Characteristics are not loading in Inspection sheet
- Closed in Cy3
- 03:03 PM Bug #15363 (Not Resolved): Inspection Sheet : Inspection sheet is not opening if Inspector In/Out time is not provided
- 03:03 PM Bug #15360 (Closed): Inspection Form Std : By default Select operation is displayed in operation field if operation is not selected
- Closed in Cy3
- 03:02 PM Bug #15335 (Closed): TSR: When decomposing the function for twice or thrice in FSR, The safety goal in TSR shows the different ID.
- 03:01 PM Bug #15412 (Closed): Document is not going to approval when the route option is set as Assign by admin
- Document is not going to approval when the route option is set as Assign by admin
Case:
1.Create Parent level a... - 02:53 PM Bug #15411 (Closed): Inprocess Inspection sheet is not opening if Production In-process status is enabled in IC Settings
- Inprocess Inspection sheet is not opening if Production In-process status is enabled in IC Settings
- 02:50 PM Bug #15306 (Closed): Block Diagram: When selecting Driver Airbag the context element is not changed to Front impact airbag system
- 02:46 PM Bug #15308 (Closed): Block Diagram: Once the comments is added, user not able to delete the comments or leave the comment section blank
- 02:43 PM Bug #15311 (Closed): while editing comments in item boundaries it is reflected in comments box, only after refreshing the page.
- 02:27 PM Bug #15314 (Closed): Interface Type: sample line and color are not displayed while publish interface type
- 02:25 PM Bug #15409 (Closed): About EWQIMS is not displaying Fully when clicked.
- About EWQIMS is not displaying Fully when clicked.
Issue Faced in inst 4 - 02:24 PM Bug #15256 (Closed): In chrome browser it is showing only the training request option for a document in the TOC
- 02:19 PM Bug #15408 (Closed): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- Charts : Sample values entered for all variable characteristics are displayed in the charts, should display correspon...
- 02:18 PM Bug #15312 (Closed): Block diagram: when enable automate diagram is Checked the internal elements displays in orange color
- 02:18 PM Bug #15315 (Closed): Functional Analysis: Request Id is not displayed in published document
- 02:08 PM Bug #15320 (Closed): FSR: Add function icon Alignment is not proper
- 01:02 PM Bug #15309 (Closed): Block Diagram: First publish is not displayed in block diagram
- 01:00 PM Bug #15310 (Closed): Block Diagram: When publishing the block diagram several revision, the published document displays the previous revision.
- 12:54 PM Bug #15313 (Closed): Perform Audit -> Upload NC / OFI -> Duplicate category is displayed on CAR category field
- 12:53 PM Bug #15317 (Closed): When the user is already added in the "APQP Group" then getting module admin rights for supplier management it shows the Projects and Program menu with view access rights.
- 12:51 PM Bug #15287 (Closed): Multisite -> Audit Schedule -> The scheduled audit is displaying as "Awaiting for approval" and its not getting published
- Verified and closed since its unable to replicate as per steps
- 12:48 PM Bug #15332 (Closed): Block Diagram: When enable automate diagram is checked a blank external element box is displayed
- 12:45 PM Bug #15318 (Closed): Safety Goal: ASIL values are not displayed on publishing safety goal document
- 12:37 PM Bug #15339 (Closed): Block Diagram: When adding comments and clicking ok button the comment box is not closed
- 12:37 PM Bug #15340 (Closed): Block Diagram: when adding comments and scroll down the page or the comment element is moved, the comment box is freezes were it is placed
- 12:35 PM Bug #15344 (Closed): Safety Goal: while publishing safety goal alignment is not proper in published document.
- 12:21 PM Bug #15285 (Closed): SP921.1 (Hotfix) -> Perform audit -> Publish for approval / Submit to auditee -> Export to excel : Report content is not getting displayed fully
- 12:19 PM Bug #15286 (Closed): Perform Audit -> Session is getting expired after publishing audit report by using any template
- Verified in cy3
- 12:18 PM Bug #15253 (Closed): Budget Management - Not able to add project expenses - Showing error details when trying to save the budget details.
- Issued fixed in Cycle 3
- 12:08 PM Bug #15260 (Closed): No reason is asking while selecting risks level for newly created supplier(not imported supplier)
- as discussed with dev team this is an expected behaviour hence closing this issue
- 10:25 AM Bug #15260 (Not Resolved): No reason is asking while selecting risks level for newly created supplier(not imported supplier)
- For initial set up of an imported supplier (choosing qualified/not qualified) application asking for reason but the s...
- 11:58 AM Bug #15402 (Closed): New Draft Request: Adding Non ITAR user along with ITAR user in Draft viewer and checking the ITAR compliance, Along with ITAR user getting removed.
- New Draft Request: Adding Non ITAR user along with ITAR user in Draft viewer and checking the ITAR compliance, Along ...
- 11:39 AM Bug #15291 (Closed): Process / Activities -> Process - Audit Form mapping -> Online form -> Assigned checklist is not displayed. Its showing all the data's
- 11:36 AM Bug #15289 (Closed): Multisite -> Process / Activities -> Process - Clause mapping is not working for multisite.
- 11:22 AM Bug #15254 (Closed): Couldn't able to create an ITAR route from the admin login
- 11:15 AM Bug #15263 (Closed): New Document Draft: Allowing to select the Non ITAR user as Viewer for ITAR Document
- 11:07 AM Bug #15288 (Closed): Entity Creation -> Edit Entity -> System is not allowing to create the same entity across other sites
- Verified in CY3
- 11:04 AM Bug #15276 (Closed): Pending Request - Documents gets duplicated
- 11:03 AM Bug #15280 (Closed): User replacement: Select user popup: User should display based on ITAR rights, Now its showing both ITAR and NON ITAR users
- 10:41 AM Bug #15400 (Closed): New Document request->The check box " Is ITAR compliance" can be kept little bit away from the Note so that it can be properly visible
- New Document request->The check box " Is ITAR compliance" can be kept little bit away from the Note so that it can be...
- 10:41 AM Bug #15283 (Closed): Folder management: ITAR route label missing
- 10:34 AM Bug #15355 (Closed): Impact Analysis - While replacing any existing image, system displays two images. On clicking Submit button it displays only one element.
- 10:33 AM Bug #15370 (Closed): FSR: When assigning add ASIL value, throws the following Error - Refer Description
- 10:28 AM Bug #15262: Unable to add part as no add button is showing even after specifying all necessary details in supplier creation(imported supplier)
- 15395 connected issue in cy3
- 10:26 AM Bug #15262 (Not Resolved): Unable to add part as no add button is showing even after specifying all necessary details in supplier creation(imported supplier)
- connected with new cy-3 issue.
- 10:22 AM Bug #15257 (Not Resolved): Supplier Template-Empty checkbox is listing (UI issue).Refer screen shot
- Issue still exist in cy3 925.pls find screen shot
- 10:20 AM Bug #15266 (Closed): Part tree load by Commodity shows empty alert if no details in commodity master screen
- working fine in cy3 925
- 10:19 AM Bug #15269 (Closed): Label issue in Part tree load by system and subsystem issue.refer screen shot
- working fine in cy3 925
- 10:19 AM Bug #15270 (Closed): On clicking Commodity menu page navigates to Programs screen.Pls refer screen shot
- working fine in cy3 925
- 10:16 AM Bug #15397 (Closed): Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed
- Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed
- 09:42 AM Bug #15302 (Closed): Requirement Tree: While opening failure tree from requirement tree using context menu, the page is not loaded
- 09:41 AM Bug #15303 (Closed): Requirement Tree: While opening EFC tree from requirement tree using context menu, the page is not loaded
01/08/2020
- 06:22 PM Bug #15346 (Not Resolved): VOC - Flowdown/FlowUp is not working as expected. (Refer Description )
- Issue Occurs in All Tree Diagrams
- 06:21 PM Bug #15299 (Closed): VOC: Search option in requirements is not working properly
- 06:19 PM Bug #15347 (Closed): VOC - While performing Flowdown for two different child elements, system displays the flowdown for only one element. On Refresh it displays both.
- 06:18 PM Bug #15343 (Closed): Tree Diagrams - Legend and Scrollbars are not displayed properly. (Refer Description)
- 06:18 PM Bug #15304 (Closed): EFC Tree: Double scroll is displayed on opening EFC tree diagram
- 06:17 PM Bug #15300 (Closed): Requirement Tree: When flow down/up is done only it is reflecting after the refresh button is pressed
- 06:17 PM Bug #15345 (Closed): Tree Diagrams - All the Requirement Flowdown in Requirement Tree are displayed as Function Flowdown in EFC Tree
- 06:15 PM Bug #15296 (Closed): When adding BOM elements or on creating. BOM is not added/created.
- 06:08 PM Bug #15331 (Closed): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- 06:03 PM Bug #15336 (Closed): Process VDA - Functional/Failure Analysis - FourM is displayed in Random areas in Tree/Table view. It can be displayed in specific location
- Closed in SP925 Cycle 3
- 06:03 PM Bug #15348 (Closed): Design VDA - Structure Analysis - Unable to Copy/Move element. options are not displayed while drag and Drop.
- Closed in SP925 Cycle 3
- 06:02 PM Bug #15349 (Closed): Design VDA - Structure Analysis - Expand/Collapse is not working as expected.
- Closed in SP925 Cycle 3
- 06:00 PM Bug #15381 (Closed): Process VDA - Functional/Failure Analysis - After Excluding the items, system displays the Blank branch.It is not refreshing Automatically. (Refer Description)
- Closed in SP925 Cycle 3
- 05:56 PM Bug #15364 (Not Resolved): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- Failure Analysis is not opening.
- 05:55 PM Bug #15392 (Closed): Part master-System and Subsystem against with commodity not loaded properly
- Part master-System and Subsyustem against with commodity not loaded properly
- 05:53 PM Bug #15350 (Closed): Structure Analysis: When allocating 100% in all steps the 7th step allocation is broke down
- Closed in SP925 Cycle 3
- 05:52 PM Bug #15338 (Closed): Risk and Optimization - Two scrollbars are displayed in the Responsible person selection window
- Closed in SP925 Cycle 3
- 05:51 PM Bug #15333 (Closed): Process VDA - Functional/Failure Analysis - While selecting Delete Branch option, System can display confirmation alert before deleting.
- Closed in SP925 Cycle 3
- 05:50 PM Bug #15391 (Closed): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- Checklist -> blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 05:49 PM Bug #15328 (Closed): Design VDA - The overall risk reduced as follows - Calculation for High/Medium/Low IS not working.
- Closed in SP925 Cycle 3
- 05:49 PM Bug #15325 (Closed): Design VDA: Architectural/Block Diagram In Add/Remove Element its displaying Unwanted Scroll Bar for the Single PI Element
- Closed in SP925 Cycle 3
- 05:48 PM Bug #14492 (Closed): Design/Process VDA: Document Header Resize is not working properly in DFMEA and PFMEA
- Closed in SP925 Cycle 3
- 05:43 PM Bug #15390 (Closed): Report -> Audit Repeat NC -> Various finding status is missing
- Report -> Audit Repeat NC -> Finding Status ->
1. Deadline violated and closed out status,
2. Deadline violate... - 05:38 PM Bug #15355 (Fixed with Hotfix): Impact Analysis - While replacing any existing image, system displays two images. On clicking Submit button it displays only one element.
- 04:49 PM Bug #15389 (Closed): Folder Management: Once the Edit ITAR Route Options is checked , Not able to uncheck the option .
- Folder Management: Once the Edit ITAR Route Options is checked , Not able to uncheck the option .
- 02:51 PM Bug #15388 (Closed): Problem Master: Root Cause category sorting is not working as expected.
- Problem Master: Root Cause category sorting is not working as expected.
- 01:14 PM Bug #15387 (Closed): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources...
- 12:34 PM Bug #15383 (In Progress): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 11:27 AM Bug #15383 (Open): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 12:33 PM Bug #15379 (In Progress): Functional Analysis: DFMEA functions/Requirements are listed in Published document
- 11:28 AM Bug #15379 (Open): Functional Analysis: DFMEA functions/Requirements are listed in Published document
- 12:05 PM Suggestion #15386 (Closed): Equipment part and Die linkage: No need to displays the Non manufacturing line details in Equipment part and Equipment part die Linkage menu
- Equipment part and Die linkage: No need to displays the Non manufacturing line details in Equipment part and Equipmen...
- 11:53 AM Bug #15385 (Closed): Utility Equipment: Need Equipment path details for Utility Equipment
- Utility Equipment: Need Equipment path details for Utility Equipment
- 11:30 AM Bug #15382 (In Progress): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- 11:05 AM Bug #15382 (Open): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
01/07/2020
- 08:44 PM Bug #15354 (Resolved): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 08:44 PM Bug #15291 (Resolved): Process / Activities -> Process - Audit Form mapping -> Online form -> Assigned checklist is not displayed. Its showing all the data's
- 08:44 PM Bug #15289 (Resolved): Multisite -> Process / Activities -> Process - Clause mapping is not working for multisite.
- 08:44 PM Bug #15272 (Resolved): While Changing the Process from In Active to Active or From Active to In Active Displays alert as "Duplicate process"
- 07:28 PM Bug #15381 (Resolved): Process VDA - Functional/Failure Analysis - After Excluding the items, system displays the Blank branch.It is not refreshing Automatically. (Refer Description)
- 07:27 PM Bug #15381 (Open): Process VDA - Functional/Failure Analysis - After Excluding the items, system displays the Blank branch.It is not refreshing Automatically. (Refer Description)
- 01:05 PM Bug #15381 (Closed): Process VDA - Functional/Failure Analysis - After Excluding the items, system displays the Blank branch.It is not refreshing Automatically. (Refer Description)
- • After Excluding items and right click again, system displays the Context menu for the Blank branch. It is not refre...
- 07:24 PM Bug #15365: CpCpkPpPpk values are not displaying in Inspection Sheet
- Common for all types of Inspection
- 05:21 PM Bug #15365 (Resolved): CpCpkPpPpk values are not displaying in Inspection Sheet
- 07:23 PM Bug #15384 (Closed): Receiving/Final Inspection : If Characteristics class is not selected in Inspection Parameters for a characteristic ,that characteristic is not displayed in Inspection sheet
- Receiving/Final Inspection : If Characteristics class is not selected in Inspection Parameters for a characteristic ,...
- 07:15 PM Bug #15369 (Resolved): Charts : By default all operations are displayed in chart header.Should display only the corresponding operation to which the characteristic belongs
- 07:04 PM Bug #15355 (Resolved): Impact Analysis - While replacing any existing image, system displays two images. On clicking Submit button it displays only one element.
- 06:56 PM Bug #15355 (In Progress): Impact Analysis - While replacing any existing image, system displays two images. On clicking Submit button it displays only one element.
- 06:55 PM Bug #15299 (Resolved): VOC: Search option in requirements is not working properly
- 06:55 PM Bug #15336 (Resolved): Process VDA - Functional/Failure Analysis - FourM is displayed in Random areas in Tree/Table view. It can be displayed in specific location
- 06:50 PM Bug #15288 (Fixed with Hotfix): Entity Creation -> Edit Entity -> System is not allowing to create the same entity across other sites
- 06:43 PM Bug #15323 (Resolved): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 06:11 PM Bug #15360 (Resolved): Inspection Form Std : By default Select operation is displayed in operation field if operation is not selected
- given fix
- 06:11 PM Bug #15363 (Resolved): Inspection Sheet : Inspection sheet is not opening if Inspector In/Out time is not provided
- given fix
- 05:39 PM Bug #15344 (Fixed with Hotfix): Safety Goal: while publishing safety goal alignment is not proper in published document.
- 05:30 PM Bug #15344 (Resolved): Safety Goal: while publishing safety goal alignment is not proper in published document.
- 05:34 PM Bug #15306 (Fixed with Hotfix): Block Diagram: When selecting Driver Airbag the context element is not changed to Front impact airbag system
- 03:20 PM Bug #15306 (Resolved): Block Diagram: When selecting Driver Airbag the context element is not changed to Front impact airbag system
- 04:38 PM Bug #15346 (Resolved): VOC - Flowdown/FlowUp is not working as expected. (Refer Description )
- 04:10 PM Bug #15364 (Resolved): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 12:16 PM Bug #15364 (In Progress): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 11:38 AM Bug #15364 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 04:01 PM Bug #15347 (Fixed with Hotfix): VOC - While performing Flowdown for two different child elements, system displays the flowdown for only one element. On Refresh it displays both.
- 02:54 PM Bug #15347 (Resolved): VOC - While performing Flowdown for two different child elements, system displays the flowdown for only one element. On Refresh it displays both.
- 03:46 PM Bug #15367 (Resolved): Operators : Unable to perform delete operation
- 03:42 PM Bug #15331 (Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- 03:06 PM Bug #15331 (Resolved): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- 02:31 PM Bug #15331 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- Edit and Delete Failure options are displayed without adding Failure.
- 03:21 PM Bug #15382: Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- Block Diagram:Internal Element displays as external element while performing the following description
->select in... - 01:07 PM Bug #15382 (Closed): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- 02:27 PM Bug #15383 (Closed): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- • While adding large data for Effect and Cause from the master tables, system automatically assigns more space in bet...
- 01:20 PM Bug #15371 (Resolved): Equipment and Die Skill matrix: Profile picture of the user is not showing properly in Equipment and Die Skill matrix
- Not able to replicate
- 12:41 PM Bug #15340 (Fixed with Hotfix): Block Diagram: when adding comments and scroll down the page or the comment element is moved, the comment box is freezes were it is placed
- 12:20 PM Bug #15340 (Resolved): Block Diagram: when adding comments and scroll down the page or the comment element is moved, the comment box is freezes were it is placed
- 12:36 PM Bug #15328 (Fixed with Hotfix): Design VDA - The overall risk reduced as follows - Calculation for High/Medium/Low IS not working.
- 12:34 PM Bug #15368 (Resolved): PM Supervisor Calendar(Equipment and Die): System generating the WO for the deleted Equipment activity
- 12:24 PM Bug #15358 (Resolved): Equipment part and Equipment part die linkage: The Parts name should display in ascending order
- 12:11 PM Bug #15315 (Fixed with Hotfix): Functional Analysis: Request Id is not displayed in published document
- 12:05 PM Bug #15267 (Resolved): Equipment--> Activity-->CBM-->When edit and saved the specification, the value of min and max is not getting updated. once the page was refreshed, it showing properly
- Resolved by refresh the Grid
- 11:50 AM Bug #15379 (Closed): Functional Analysis: DFMEA functions/Requirements are listed in Published document
- While publishing functional analysis, the published document displays the DFMEA functions and requirements.
Refer ... - 11:42 AM Bug #15338 (Fixed with Hotfix): Risk and Optimization - Two scrollbars are displayed in the Responsible person selection window
- 11:39 AM Bug #15370 (Fixed with Hotfix): FSR: When assigning add ASIL value, throws the following Error - Refer Description
- If the Preference is Checked:
Allows the Higher ASIL but not less than the parent ASIL
For Example: If ASIL D i... - 11:33 AM Bug #15378 (Closed): Charts : Need to display the selected chart by-default while opening the chart from context menu
- Charts : Need to display the selected chart by-default while opening the chart from context menu
- 11:20 AM Bug #14492 (Fixed with Hotfix): Design/Process VDA: Document Header Resize is not working properly in DFMEA and PFMEA
- 11:13 AM Bug #15317 (Resolved): When the user is already added in the "APQP Group" then getting module admin rights for supplier management it shows the Projects and Program menu with view access rights.
- 10:16 AM Bug #15372 (Resolved): Inprocess Inspection : Characteristics are not loading in Inspection sheet
- Given fix
- 10:16 AM Bug #15372 (Open): Inprocess Inspection : Characteristics are not loading in Inspection sheet
- 10:08 AM Bug #15286 (Fixed with Hotfix): Perform Audit -> Session is getting expired after publishing audit report by using any template
- 09:52 AM Bug #15290 (Closed): Not allowing to create projects ,programs by selecting template in charter - Showing error on saving the charter.
- Issue Fixed
01/06/2020
- 08:56 PM Bug #15338 (Resolved): Risk and Optimization - Two scrollbars are displayed in the Responsible person selection window
- 06:12 PM Bug #15338 (Not Fixed with Hotfix): Risk and Optimization - Two scrollbars are displayed in the Responsible person selection window
- 05:13 PM Bug #15338 (Resolved): Risk and Optimization - Two scrollbars are displayed in the Responsible person selection window
- 11:04 AM Bug #15338 (In Progress): Risk and Optimization - Two scrollbars are displayed in the Responsible person selection window
- 08:50 PM Bug #15364 (Resolved): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 03:25 PM Bug #15364 (Open): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 12:48 PM Bug #15364 (Closed): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading. On...
- 08:36 PM Bug #15331 (Resolved): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- 06:03 PM Bug #15331 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- As discussed with Pradeepa, Edit option for all the elements like Process Item Function, Work Element Function, Effec...
- 05:14 PM Bug #15331 (Resolved): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- 11:05 AM Bug #15331 (In Progress): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- 06:56 PM Bug #15370 (Resolved): FSR: When assigning add ASIL value, throws the following Error - Refer Description
- If the Preference is Checked:
In Add ASIL Popup : less than Parent and greater than Parent ASIL Not Allowed for th... - 05:03 PM Bug #15370 (In Progress): FSR: When assigning add ASIL value, throws the following Error - Refer Description
- 03:39 PM Bug #15370 (Open): FSR: When assigning add ASIL value, throws the following Error - Refer Description
- 03:26 PM Bug #15370 (Closed): FSR: When assigning add ASIL value, throws the following Error - Refer Description
- When assigning add ASIL value lesser than highest value throws error as "subdivided ASILs is less than the parent ASI...
- 06:38 PM Bug #15315 (Resolved): Functional Analysis: Request Id is not displayed in published document
- 06:33 PM Bug #15315 (Not Fixed with Hotfix): Functional Analysis: Request Id is not displayed in published document
- Published document shows different function and blank row
Refer Screenshot - 05:14 PM Bug #15315 (Resolved): Functional Analysis: Request Id is not displayed in published document
- 06:30 PM Bug #15350 (Fixed with Hotfix): Structure Analysis: When allocating 100% in all steps the 7th step allocation is broke down
- 06:30 PM Bug #15350 (Resolved): Structure Analysis: When allocating 100% in all steps the 7th step allocation is broke down
- 06:12 PM Bug #15350 (Not Fixed with Hotfix): Structure Analysis: When allocating 100% in all steps the 7th step allocation is broke down
- When the Data is large (Ex: Email ID is large), System displays Scrollbar
- 05:12 PM Bug #15350 (Resolved): Structure Analysis: When allocating 100% in all steps the 7th step allocation is broke down
- 06:22 PM Bug #15285 (Fixed with Hotfix): SP921.1 (Hotfix) -> Perform audit -> Publish for approval / Submit to auditee -> Export to excel : Report content is not getting displayed fully
- 06:16 PM Bug #15335 (Fixed with Hotfix): TSR: When decomposing the function for twice or thrice in FSR, The safety goal in TSR shows the different ID.
- 04:43 PM Bug #15335 (Resolved): TSR: When decomposing the function for twice or thrice in FSR, The safety goal in TSR shows the different ID.
- After discussion with pradeepa the functionality is working fine.
- 06:15 PM Bug #15339 (Fixed with Hotfix): Block Diagram: When adding comments and clicking ok button the comment box is not closed
- 06:14 PM Bug #15333 (Fixed with Hotfix): Process VDA - Functional/Failure Analysis - While selecting Delete Branch option, System can display confirmation alert before deleting.
- 05:13 PM Bug #15333 (Resolved): Process VDA - Functional/Failure Analysis - While selecting Delete Branch option, System can display confirmation alert before deleting.
- 11:04 AM Bug #15333 (In Progress): Process VDA - Functional/Failure Analysis - While selecting Delete Branch option, System can display confirmation alert before deleting.
- 06:13 PM Bug #15287 (Yet to Verify): Multisite -> Audit Schedule -> The scheduled audit is displaying as "Awaiting for approval" and its not getting published
- Need to verify in Cy-3 build
- 06:12 PM Bug #15313 (Fixed with Hotfix): Perform Audit -> Upload NC / OFI -> Duplicate category is displayed on CAR category field
- 06:07 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location
- Multi site: Email->Email link is not redirecting to correct location
- 06:06 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location
- ...
- 03:25 PM Bug #15359 (Open): Multi site: Email->Email link is not redirecting to correct location
- 02:02 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location
- Mutltisite: Email->Email link is not redirecting to correct location
- 11:46 AM Bug #15359 (Closed): Multi site: Email->Email link is not redirecting to correct location
- Multi site: Email->Email link is not redirecting to correct location
- 06:05 PM Bug #15343 (Fixed with Hotfix): Tree Diagrams - Legend and Scrollbars are not displayed properly. (Refer Description)
- 05:03 PM Bug #15343 (Resolved): Tree Diagrams - Legend and Scrollbars are not displayed properly. (Refer Description)
- 12:41 PM Bug #15343: Tree Diagrams - Legend and Scrollbars are not displayed properly. (Refer Description)
- After Visiting AQUA pages and loading Tree diagram, the legends are hidden between the scroll bars
- 06:05 PM Bug #15298 (Fixed with Hotfix): ITAR Route: AQuAPro Publish for the ITAR Route is not waiting for the Approvers its allowing for Auto-Publish Approval
- 06:03 PM Bug #15298 (Resolved): ITAR Route: AQuAPro Publish for the ITAR Route is not waiting for the Approvers its allowing for Auto-Publish Approval
- 06:05 PM Bug #15345 (Fixed with Hotfix): Tree Diagrams - All the Requirement Flowdown in Requirement Tree are displayed as Function Flowdown in EFC Tree
- 01:08 PM Bug #15345 (Resolved): Tree Diagrams - All the Requirement Flowdown in Requirement Tree are displayed as Function Flowdown in EFC Tree
- 06:05 PM Bug #15305 (Fixed with Hotfix): Route: Publishing the AQuAPro ITAR PI in the Level which having ITAR & NON-ITAR Route, By Default its taking the NON-ITAR Route
- 06:03 PM Bug #15305 (Resolved): Route: Publishing the AQuAPro ITAR PI in the Level which having ITAR & NON-ITAR Route, By Default its taking the NON-ITAR Route
- 06:03 PM Bug #15316 (Fixed with Hotfix): Audit Status -> Audit Report (Template1) -> IMPROVEMENTS SUGGESTED IN THE SYSTEM field -> The OFI category is not showing the data based on Category
- 05:42 PM Bug #15322 (Fixed with Hotfix): Copper Standard Issue: In Main & Main2 D/PFMEA, Multi-Select Issues in the Control Methods Column (Preventive and Detective Controls)
- 04:35 PM Bug #15322 (Resolved): Copper Standard Issue: In Main & Main2 D/PFMEA, Multi-Select Issues in the Control Methods Column (Preventive and Detective Controls)
- Fixed and patches provided for testing
- 05:41 PM Bug #15325 (Fixed with Hotfix): Design VDA: Architectural/Block Diagram In Add/Remove Element its displaying Unwanted Scroll Bar for the Single PI Element
- 04:50 PM Bug #15325 (Resolved): Design VDA: Architectural/Block Diagram In Add/Remove Element its displaying Unwanted Scroll Bar for the Single PI Element
- 05:14 PM Bug #15328 (Resolved): Design VDA - The overall risk reduced as follows - Calculation for High/Medium/Low IS not working.
- 11:05 AM Bug #15328 (In Progress): Design VDA - The overall risk reduced as follows - Calculation for High/Medium/Low IS not working.
- 05:10 PM Bug #15372 (Closed): Inprocess Inspection : Characteristics are not loading in Inspection sheet
- Inprocess Inspection : Characteristics are not loading in Inspection sheet
- 05:06 PM Bug #15336 (Not Resolved): Process VDA - Functional/Failure Analysis - FourM is displayed in Random areas in Tree/Table view. It can be displayed in specific location
- 01:09 PM Bug #15336 (Resolved): Process VDA - Functional/Failure Analysis - FourM is displayed in Random areas in Tree/Table view. It can be displayed in specific location
- 05:04 PM Bug #15348 (Fixed with Hotfix): Design VDA - Structure Analysis - Unable to Copy/Move element. options are not displayed while drag and Drop.
- 11:33 AM Bug #15348 (Resolved): Design VDA - Structure Analysis - Unable to Copy/Move element. options are not displayed while drag and Drop.
- 05:04 PM Bug #15349 (Fixed with Hotfix): Design VDA - Structure Analysis - Expand/Collapse is not working as expected.
- 11:33 AM Bug #15349 (Resolved): Design VDA - Structure Analysis - Expand/Collapse is not working as expected.
- 05:03 PM Bug #15324 (Closed): Security Definitions Old: Set View Rights for the Particular PI is not working as expected
- 04:52 PM Bug #15277 (Resolved): While Changing From Non ITAR instance to ITAR Instance system does not display Valid validation
- 04:52 PM Bug #15288 (Resolved): Entity Creation -> Edit Entity -> System is not allowing to create the same entity across other sites
- 04:51 PM Bug #15327 (Resolved): (Existing db)Assign Route: The site details is not showing in the site field
- 04:40 PM Bug #15255 (Closed): For a completed task, Project manager is able to change the resource selected for a document from the deliverable info dropdown
- Issue resolved.
- 04:28 PM Bug #15255 (Resolved): For a completed task, Project manager is able to change the resource selected for a document from the deliverable info dropdown
- 04:37 PM Bug #15319 (Resolved): Menu:Unwanted menus is displayed when user has only module access.
- 04:35 PM Bug #14492 (Resolved): Design/Process VDA: Document Header Resize is not working properly in DFMEA and PFMEA
- Fixed and patches provided for testing
- 04:32 PM Bug #15253 (Resolved): Budget Management - Not able to add project expenses - Showing error details when trying to save the budget details.
- 04:28 PM Bug #15279 (Resolved): Template to Project Conversion , Project to template conversion- Not working - Showing Undefined error.
- 04:28 PM Bug #15290 (Resolved): Not allowing to create projects ,programs by selecting template in charter - Showing error on saving the charter.
- 04:27 PM Bug #15294 (Resolved): Need to change the alert for approved data selection - "Please select approved date."
- 03:40 PM Bug #15280 (Resolved): User replacement: Select user popup: User should display based on ITAR rights, Now its showing both ITAR and NON ITAR users
- 03:39 PM Bug #15371 (Open): Equipment and Die Skill matrix: Profile picture of the user is not showing properly in Equipment and Die Skill matrix
- 03:32 PM Bug #15371 (Closed): Equipment and Die Skill matrix: Profile picture of the user is not showing properly in Equipment and Die Skill matrix
- Equipment and Die Skill matrix: Profile picture of the user is not showing properly in Equipment and Die Skill matrix
- 03:25 PM Bug #15369 (Open): Charts : By default all operations are displayed in chart header.Should display only the corresponding operation to which the characteristic belongs
- 03:25 PM Bug #15369 (Closed): Charts : By default all operations are displayed in chart header.Should display only the corresponding operation to which the characteristic belongs
- Charts : By default all operations are displayed in chart header.Should display only the corresponding operation to w...
- 03:25 PM Bug #15368 (Open): PM Supervisor Calendar(Equipment and Die): System generating the WO for the deleted Equipment activity
- 03:08 PM Bug #15368 (Closed): PM Supervisor Calendar(Equipment and Die): System generating the WO for the deleted Equipment activity
- PM Supervisor Calendar: System generating the WO for the deleted Equipment activity.
Note: Facing issue for the Ac... - 03:25 PM Bug #15367 (Open): Operators : Unable to perform delete operation
- 03:02 PM Bug #15367 (Closed): Operators : Unable to perform delete operation
- Operators : Unable to perform delete operation
- 03:25 PM Suggestion #15366 (Open): PM Supervisor and PM Calendar(Equipment and Die) --> If user tries to draft the entered details, the system should not display the alert message to enter the actual date and time details.
- 02:39 PM Suggestion #15366 (Closed): PM Supervisor and PM Calendar(Equipment and Die) --> If user tries to draft the entered details, the system should not display the alert message to enter the actual date and time details.
- PM Supervisor and PM Calendar(Equipment and Die) --> If user tries to draft the entered details, the system should no...
- 03:25 PM Bug #15365 (Open): CpCpkPpPpk values are not displaying in Inspection Sheet
- 01:03 PM Bug #15365 (Closed): CpCpkPpPpk values are not displaying in Inspection Sheet
- CpCpkPpPpk values are not displaying in Inspection Sheet for Receiving Inspection
- 03:25 PM Bug #15363 (Open): Inspection Sheet : Inspection sheet is not opening if Inspector In/Out time is not provided
- 12:20 PM Bug #15363 (Closed): Inspection Sheet : Inspection sheet is not opening if Inspector In/Out time is not provided
- Inspection Sheet : Inspection sheet is not opening if Inspector In/Out time is not provided
(Common for all types of... - 03:25 PM Bug #15362 (Open): Receiving Inspection Scheduling : Shortage Qty taking negative values while performing update operation
- 12:11 PM Bug #15362 (Closed): Receiving Inspection Scheduling : Shortage Qty taking negative values while performing update operation
- Receiving Inspection Scheduling : Shortage Qty taking negative values while performing update operation
- 03:25 PM Suggestion #15361 (Open): Die: Cavity--> Need "Select" option as default
- 12:09 PM Suggestion #15361 (Closed): Die: Cavity--> Need "Select" option as default
- 1. Die: Cavity--> Need "Select" option as default in cavity drop down field
2. Need Optional label behind the Die ... - 03:25 PM Bug #15360 (Open): Inspection Form Std : By default Select operation is displayed in operation field if operation is not selected
- 12:01 PM Bug #15360 (Closed): Inspection Form Std : By default Select operation is displayed in operation field if operation is not selected
- Inspection Form Std : By default Select operation is displayed in operation field if operation is not selected
- 03:25 PM Bug #15358 (Open): Equipment part and Equipment part die linkage: The Parts name should display in ascending order
- 11:39 AM Bug #15358 (Closed): Equipment part and Equipment part die linkage: The Parts name should display in ascending order
- Equipment part and Equipment part die linkage: The Parts name should display in ascending order
- 03:25 PM Bug #15357 (Open): Import : Secondary Email address column is needed.
- 11:01 AM Bug #15357 (Closed): Import : Secondary Email address column is needed.
- Import : Secondary Email address column is needed.
- 03:25 PM Bug #15356 (Open): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.
- 10:46 AM Bug #15356 (Closed): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.
- Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert...
- 03:25 PM Bug #15355 (Open): Impact Analysis - While replacing any existing image, system displays two images. On clicking Submit button it displays only one element.
- 03:25 PM Bug #15354 (Open): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 03:25 PM Bug #15352 (Open): Master--> Able to save the master without entering the linearity initial schedule
- 11:05 AM Bug #15257 (Resolved): Supplier Template-Empty checkbox is listing (UI issue).Refer screen shot
- 11:05 AM Bug #15268 (Resolved): Part tree load by System shows Default.refer screen shot
01/03/2020
- 08:06 PM Bug #15344 (In Progress): Safety Goal: while publishing safety goal alignment is not proper in published document.
- 04:30 PM Bug #15344 (Open): Safety Goal: while publishing safety goal alignment is not proper in published document.
- 01:08 PM Bug #15344 (Closed): Safety Goal: while publishing safety goal alignment is not proper in published document.
- Safety Goal: while publishing safety goal alignment is not proper in published document.
Refer Screenshot - 08:06 PM Bug #15350 (In Progress): Structure Analysis: When allocating 100% in all steps the 7th step allocation is broke down
- 05:23 PM Bug #15350 (Open): Structure Analysis: When allocating 100% in all steps the 7th step allocation is broke down
- 04:47 PM Bug #15350 (Closed): Structure Analysis: When allocating 100% in all steps the 7th step allocation is broke down
- Structure Analysis: When allocating 100% in all steps the 7th step allocation is broke down
- 05:52 PM Bug #15287 (Resolved): Multisite -> Audit Schedule -> The scheduled audit is displaying as "Awaiting for approval" and its not getting published
- As per the Discussion with QA,Not able to replicate.
- 05:34 PM Bug #15347 (In Progress): VOC - While performing Flowdown for two different child elements, system displays the flowdown for only one element. On Refresh it displays both.
- 04:30 PM Bug #15347 (Open): VOC - While performing Flowdown for two different child elements, system displays the flowdown for only one element. On Refresh it displays both.
- 03:25 PM Bug #15347 (Closed): VOC - While performing Flowdown for two different child elements, system displays the flowdown for only one element. On Refresh it displays both.
- While performing Flowdown for two different child elements, system displays the flowdown for only one element. On Ref...
- 05:34 PM Bug #15346 (In Progress): VOC - Flowdown/FlowUp is not working as expected. (Refer Description )
- 04:30 PM Bug #15346 (Open): VOC - Flowdown/FlowUp is not working as expected. (Refer Description )
- 03:20 PM Bug #15346 (Closed): VOC - Flowdown/FlowUp is not working as expected. (Refer Description )
- • When selecting the Checkbox on the Element, system selects along with the Function and Requirement. But only Elemen...
- 05:34 PM Bug #15343 (In Progress): Tree Diagrams - Legend and Scrollbars are not displayed properly. (Refer Description)
- 04:30 PM Bug #15343 (Open): Tree Diagrams - Legend and Scrollbars are not displayed properly. (Refer Description)
- 01:06 PM Bug #15343 (Closed): Tree Diagrams - Legend and Scrollbars are not displayed properly. (Refer Description)
- • By Default Legend and Scrollbars are not displayed properly.
• After Clicking Toggle Fullscreen option and Press... - 05:33 PM Bug #15355 (Closed): Impact Analysis - While replacing any existing image, system displays two images. On clicking Submit button it displays only one element.
- While replacing any existing image, system displays two images. On clicking Sun=bmit button it displays only one elem...
- 05:10 PM Bug #15354 (Closed): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 04:57 PM Bug #15352 (Closed): Master--> Able to save the master without entering the linearity initial schedule
- Master--> Able to save the master without entering the linearity initial schedule
- 04:39 PM Bug #15340 (In Progress): Block Diagram: when adding comments and scroll down the page or the comment element is moved, the comment box is freezes were it is placed
- 01:08 PM Bug #15340 (Open): Block Diagram: when adding comments and scroll down the page or the comment element is moved, the comment box is freezes were it is placed
- 12:47 PM Bug #15340 (Closed): Block Diagram: when adding comments and scroll down the page or the comment element is moved, the comment box is freezes were it is placed
- Block Diagram: when adding comments and scroll down the page or the comment element is moved, the comment box is free...
- 04:30 PM Bug #15349 (Open): Design VDA - Structure Analysis - Expand/Collapse is not working as expected.
- 03:57 PM Bug #15349 (Closed): Design VDA - Structure Analysis - Expand/Collapse is not working as expected.
- There is no option to show the Collapsed individual element. It can be done only after collapsing all the elements.
- 04:30 PM Bug #15348 (Open): Design VDA - Structure Analysis - Unable to Copy/Move element. options are not displayed while drag and Drop.
- 03:51 PM Bug #15348 (Closed): Design VDA - Structure Analysis - Unable to Copy/Move element. options are not displayed while drag and Drop.
- Unable to Copy/Move element. options are not displayed while drag and Drop.
- 04:30 PM Bug #15345 (Open): Tree Diagrams - All the Requirement Flowdown in Requirement Tree are displayed as Function Flowdown in EFC Tree
- 03:11 PM Bug #15345 (Closed): Tree Diagrams - All the Requirement Flowdown in Requirement Tree are displayed as Function Flowdown in EFC Tree
- All the Requirement Flowdown in Requirement Tree are displayed as Function Flowdown in EFC Tree
- 04:30 PM Bug #15342 (Open): Uppercase and lower case should be proper throughout site
- 01:01 PM Bug #15342 (Closed): Uppercase and lower case should be proper throughout site
- 04:30 PM Bug #15338 (Open): Risk and Optimization - Two scrollbars are displayed in the Responsible person selection window
- 11:53 AM Bug #15338 (Closed): Risk and Optimization - Two scrollbars are displayed in the Responsible person selection window
- Two scrollbars are displayed in the Responsible person selection window
- 04:30 PM Bug #15327 (Open): (Existing db)Assign Route: The site details is not showing in the site field
- 04:30 PM Bug #15324 (Open): Security Definitions Old: Set View Rights for the Particular PI is not working as expected
- 04:30 PM Bug #15322 (Open): Copper Standard Issue: In Main & Main2 D/PFMEA, Multi-Select Issues in the Control Methods Column (Preventive and Detective Controls)
- 04:26 PM Bug #15326 (Open): Copy location: Copy location is not working when "ppap" is checked
- 04:26 PM Bug #15319 (Open): Menu:Unwanted menus is displayed when user has only module access.
- 04:26 PM Bug #15317 (Open): When the user is already added in the "APQP Group" then getting module admin rights for supplier management it shows the Projects and Program menu with view access rights.
- 03:22 PM Bug #15251 (Closed): New Document Draft - On giving change request by attaching the file(attached below) to the draft document the system keeps loading and displays alert
- 03:18 PM Bug #15300 (Fixed with Hotfix): Requirement Tree: When flow down/up is done only it is reflecting after the refresh button is pressed
- 11:36 AM Bug #15300 (Resolved): Requirement Tree: When flow down/up is done only it is reflecting after the refresh button is pressed
- 03:14 PM Bug #15321 (In Progress): Block Diagram: while publish block diagram with approvals, it is not allowing to publish again even after the approver, approved the document
- 12:57 PM Bug #15321 (Not Resolved): Block Diagram: while publish block diagram with approvals, it is not allowing to publish again even after the approver, approved the document
- 11:43 AM Bug #15321 (Resolved): Block Diagram: while publish block diagram with approvals, it is not allowing to publish again even after the approver, approved the document
- 03:14 PM Bug #15315 (In Progress): Functional Analysis: Request Id is not displayed in published document
- 02:02 PM Bug #15315 (Not Resolved): Functional Analysis: Request Id is not displayed in published document
- 11:43 AM Bug #15315 (Resolved): Functional Analysis: Request Id is not displayed in published document
- 03:14 PM Bug #15299 (In Progress): VOC: Search option in requirements is not working properly
- 02:52 PM Bug #15299 (Not Resolved): VOC: Search option in requirements is not working properly
- 11:43 AM Bug #15299 (Resolved): VOC: Search option in requirements is not working properly
- 03:13 PM Bug #15339 (Resolved): Block Diagram: When adding comments and clicking ok button the comment box is not closed
- Not able to replicated
- 01:09 PM Bug #15339 (Open): Block Diagram: When adding comments and clicking ok button the comment box is not closed
- 12:40 PM Bug #15339 (Closed): Block Diagram: When adding comments and clicking ok button the comment box is not closed
- Block Diagram: When adding comments and clicking ok button the comment box is not closed, The box remains as it is.
... - 03:12 PM Bug #15325 (In Progress): Design VDA: Architectural/Block Diagram In Add/Remove Element its displaying Unwanted Scroll Bar for the Single PI Element
- 11:17 AM Bug #15325 (Open): Design VDA: Architectural/Block Diagram In Add/Remove Element its displaying Unwanted Scroll Bar for the Single PI Element
- 02:48 PM Bug #15304 (Fixed with Hotfix): EFC Tree: Double scroll is displayed on opening EFC tree diagram
- 11:43 AM Bug #15304 (Resolved): EFC Tree: Double scroll is displayed on opening EFC tree diagram
- 02:44 PM Bug #15296 (Fixed with Hotfix): When adding BOM elements or on creating. BOM is not added/created.
- 11:36 AM Bug #15296 (Resolved): When adding BOM elements or on creating. BOM is not added/created.
- 02:43 PM Bug #15311 (Fixed with Hotfix): while editing comments in item boundaries it is reflected in comments box, only after refreshing the page.
- 11:36 AM Bug #15311 (Resolved): while editing comments in item boundaries it is reflected in comments box, only after refreshing the page.
- 02:08 PM Bug #15310 (Fixed with Hotfix): Block Diagram: When publishing the block diagram several revision, the published document displays the previous revision.
- 11:43 AM Bug #15310 (Resolved): Block Diagram: When publishing the block diagram several revision, the published document displays the previous revision.
- 02:06 PM Bug #15309 (Fixed with Hotfix): Block Diagram: First publish is not displayed in block diagram
- 11:43 AM Bug #15309 (Resolved): Block Diagram: First publish is not displayed in block diagram
- 02:06 PM Bug #15314 (Fixed with Hotfix): Interface Type: sample line and color are not displayed while publish interface type
- 11:43 AM Bug #15314 (Resolved): Interface Type: sample line and color are not displayed while publish interface type
- 01:06 PM Bug #15318 (Fixed with Hotfix): Safety Goal: ASIL values are not displayed on publishing safety goal document
- 11:43 AM Bug #15318 (Resolved): Safety Goal: ASIL values are not displayed on publishing safety goal document
- 01:01 PM Bug #15320 (Fixed with Hotfix): FSR: Add function icon Alignment is not proper
- 11:43 AM Bug #15320 (Resolved): FSR: Add function icon Alignment is not proper
- 12:50 PM Bug #15308 (Fixed with Hotfix): Block Diagram: Once the comments is added, user not able to delete the comments or leave the comment section blank
- 11:36 AM Bug #15308 (Resolved): Block Diagram: Once the comments is added, user not able to delete the comments or leave the comment section blank
- 12:32 PM Bug #14492 (Reopen): Design/Process VDA: Document Header Resize is not working properly in DFMEA and PFMEA
- 12:28 PM Bug #15276 (Resolved): Pending Request - Documents gets duplicated
- not able to replicate
- 12:22 PM Bug #15332 (Fixed with Hotfix): Block Diagram: When enable automate diagram is checked a blank external element box is displayed
- 11:36 AM Bug #15332 (Resolved): Block Diagram: When enable automate diagram is checked a blank external element box is displayed
- 11:54 AM Bug #15265 (Resolved): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- 11:51 AM Bug #15270 (Resolved): On clicking Commodity menu page navigates to Programs screen.Pls refer screen shot
- 11:51 AM Bug #15271 (Resolved): Supplier Contact-Issue 1:No action On clicking supplier contact , Issue 2:No option (create,search,deactivae) nothing is working
- 11:50 AM Bug #15266 (Resolved): Part tree load by Commodity shows empty alert if no details in commodity master screen
- 11:20 AM Bug #15269 (Resolved): Label issue in Part tree load by system and subsystem issue.refer screen shot
- 11:20 AM Bug #15273 (Resolved): Imported Supplier-Registration not getting completed even though specifying all mandatory fields
- 11:19 AM Bug #15262 (Resolved): Unable to add part as no add button is showing even after specifying all necessary details in supplier creation(imported supplier)
- 11:19 AM Bug #15264 (Resolved): Legend Status gets disappeared and no part details is showing after creating supplier (given all mandatory fields) .This issue only for supplier which is not imported
- 11:19 AM Bug #15261 (Resolved): Part master screen->Loading is keep on displaying.refer screen shot
- 11:18 AM Bug #15259 (Resolved): Part Master-Label missing for System,subsystem
- 11:16 AM Bug #15328 (Open): Design VDA - The overall risk reduced as follows - Calculation for High/Medium/Low IS not working.
- 11:14 AM Bug #15331 (Open): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- 11:13 AM Bug #15333 (Open): Process VDA - Functional/Failure Analysis - While selecting Delete Branch option, System can display confirmation alert before deleting.
- 11:10 AM Bug #15336 (Open): Process VDA - Functional/Failure Analysis - FourM is displayed in Random areas in Tree/Table view. It can be displayed in specific location
- 11:07 AM Suggestion #15337 (Open): Bill of Material - Last Added and Added First can be Renamed as Last Added and First Added
- 10:49 AM Suggestion #15337 (Closed): Bill of Material - Last Added and Added First can be Renamed as Last Added and First Added
- Last Added and Added First can be changed as Last Added and First Added
- 11:05 AM Bug #15335 (Open): TSR: When decomposing the function for twice or thrice in FSR, The safety goal in TSR shows the different ID.
01/02/2020
- 11:08 PM Bug #15309 (In Progress): Block Diagram: First publish is not displayed in block diagram
- 11:08 PM Bug #15310 (In Progress): Block Diagram: When publishing the block diagram several revision, the published document displays the previous revision.
- 11:08 PM Bug #15321 (In Progress): Block Diagram: while publish block diagram with approvals, it is not allowing to publish again even after the approver, approved the document
- 02:38 PM Bug #15321 (Open): Block Diagram: while publish block diagram with approvals, it is not allowing to publish again even after the approver, approved the document
- 10:52 PM Bug #15314 (In Progress): Interface Type: sample line and color are not displayed while publish interface type
- 09:21 PM Bug #15299 (In Progress): VOC: Search option in requirements is not working properly
- 09:19 PM Bug #15304 (In Progress): EFC Tree: Double scroll is displayed on opening EFC tree diagram
- 08:11 PM Bug #15323 (In Progress): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 02:39 PM Bug #15323 (Open): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 08:10 PM Bug #15332 (In Progress): Block Diagram: When enable automate diagram is checked a blank external element box is displayed
- 05:08 PM Bug #15332 (Open): Block Diagram: When enable automate diagram is checked a blank external element box is displayed
- 05:04 PM Bug #15332 (Closed): Block Diagram: When enable automate diagram is checked a blank external element box is displayed
- Block Diagram: When enable automate diagram is checked and assigning the values for rows and columns in Item boundari...
- 07:00 PM Bug #15300 (In Progress): Requirement Tree: When flow down/up is done only it is reflecting after the refresh button is pressed
- 05:57 PM Bug #15336 (Closed): Process VDA - Functional/Failure Analysis - FourM is displayed in Random areas in Tree/Table view. It can be displayed in specific location
- FourM is displayed in Random areas in Tree/Table view. It can be displayed in specific location
- 05:34 PM Bug #15335 (Closed): TSR: When decomposing the function for twice or thrice in FSR, The safety goal in TSR shows the different ID.
- TSR: When decomposing the function for twice or thrice in FSR, The safety goal in TSR shows the different ID.
Refe... - 05:12 PM Bug #15333 (Closed): Process VDA - Functional/Failure Analysis - While selecting Delete Branch option, System can display confirmation alert before deleting.
- Need Confirmation message for delete branch
- 05:03 PM Bug #15331 (Closed): Process VDA - Functional/Failure Analysis - Edit Option for FourM is not working in Tree View and Diagrammatic View(Refer Description)
- Edit Option for FourM is not working in Tree View.
FourM Added from Diagrammatic view is not displayed - 04:53 PM Bug #15312 (Yet to Verify): Block diagram: when enable automate diagram is Checked the internal elements displays in orange color
- Not able to replicate
- 04:51 PM Bug #15312 (Resolved): Block diagram: when enable automate diagram is Checked the internal elements displays in orange color
- Not Replicated
- 04:51 PM Bug #15302 (Yet to Verify): Requirement Tree: While opening failure tree from requirement tree using context menu, the page is not loaded
- Have to test in next build for first time on opening the tree diagram from context menu
- 04:50 PM Bug #15302 (Resolved): Requirement Tree: While opening failure tree from requirement tree using context menu, the page is not loaded
- Not Replicated
- 03:43 PM Bug #15302: Requirement Tree: While opening failure tree from requirement tree using context menu, the page is not loaded
- Have to test in next build for first time on opening the tree diagram from context menu
- 04:50 PM Bug #15303 (Yet to Verify): Requirement Tree: While opening EFC tree from requirement tree using context menu, the page is not loaded
- Have to test in next build for first time on opening the tree diagram from context menu
- 04:49 PM Bug #15303 (Resolved): Requirement Tree: While opening EFC tree from requirement tree using context menu, the page is not loaded
- Not Replicated
- 03:42 PM Bug #15303: Requirement Tree: While opening EFC tree from requirement tree using context menu, the page is not loaded
- Have to test in next build for first time on opening the tree from context menu
- 04:40 PM Bug #15315 (In Progress): Functional Analysis: Request Id is not displayed in published document
- 04:40 PM Bug #15320 (In Progress): FSR: Add function icon Alignment is not proper
- 02:37 PM Bug #15320 (Open): FSR: Add function icon Alignment is not proper
- 04:23 PM Bug #15260 (Resolved): No reason is asking while selecting risks level for newly created supplier(not imported supplier)
- For initial setup we didn't ask reason. after creating supplier we change or set risk level it will ask reason.
- 03:16 PM Bug #15313 (Resolved): Perform Audit -> Upload NC / OFI -> Duplicate category is displayed on CAR category field
- 03:08 PM Bug #15313 (Open): Perform Audit -> Upload NC / OFI -> Duplicate category is displayed on CAR category field
- Data Issue. We cannot add duplicate record from site. It is showing Duplicate data in nc category area of auditprogra...
- 03:04 PM Bug #15252 (Fixed with Hotfix): Non ITAR users are listing while providing Access to Suite,Site and Module
- As discussed with Bijoy All user will list in the following pages so changed the status to fixed with Hotfix
- 03:03 PM Bug #15252 (Resolved): Non ITAR users are listing while providing Access to Suite,Site and Module
- As discussed It is a requirement change so all ITAR and Non-ITAR users will list no Not an issue...
- 02:45 PM Bug #15311 (In Progress): while editing comments in item boundaries it is reflected in comments box, only after refreshing the page.
- 02:25 PM Bug #15328 (Closed): Design VDA - The overall risk reduced as follows - Calculation for High/Medium/Low IS not working.
- The overall risk reduced as follows is not working.
- 12:46 PM Bug #15256 (Resolved): In chrome browser it is showing only the training request option for a document in the TOC
- 12:44 PM Bug #15318 (In Progress): Safety Goal: ASIL values are not displayed on publishing safety goal document
- 12:43 PM Bug #15318 (Open): Safety Goal: ASIL values are not displayed on publishing safety goal document
- 12:20 PM Bug #15278 (Resolved): SAM audit-Audit status showing No NC by default though NC's has raised
- Not an Issue as per Screenshot. PFA
- 12:12 PM Bug #15281 (Resolved): Server error on clicking "Submit to Auditee" button for SAM audit
- 11:47 AM Bug #15327 (Closed): (Existing db)Assign Route: The site details is not showing in the site field
- Assign Route: The site details is not showing in the site field
- 11:47 AM Bug #15326 (Closed): Copy location: Copy location is not working when "ppap" is checked
- Copy location: Copy location is not working when "ppap" is checked
- 10:56 AM Bug #15316 (Resolved): Audit Status -> Audit Report (Template1) -> IMPROVEMENTS SUGGESTED IN THE SYSTEM field -> The OFI category is not showing the data based on Category
- 10:56 AM Bug #15316 (Open): Audit Status -> Audit Report (Template1) -> IMPROVEMENTS SUGGESTED IN THE SYSTEM field -> The OFI category is not showing the data based on Category
- 10:55 AM Bug #15308 (In Progress): Block Diagram: Once the comments is added, user not able to delete the comments or leave the comment section blank
- 10:54 AM Bug #15296 (In Progress): When adding BOM elements or on creating. BOM is not added/created.
- 10:35 AM Bug #15285 (Resolved): SP921.1 (Hotfix) -> Perform audit -> Publish for approval / Submit to auditee -> Export to excel : Report content is not getting displayed fully
12/31/2019
- 03:17 PM Bug #15324: Security Definitions Old: Set View Rights for the Particular PI is not working as expected
- Please Review the attached images and reverify
- 12:52 PM Bug #15324 (Closed): Security Definitions Old: Set View Rights for the Particular PI is not working as expected
- Security Definitions, If the User set the rights as View for the PI then that User can able to View the documents onl...
- 02:59 PM Bug #15325 (Closed): Design VDA: Architectural/Block Diagram In Add/Remove Element its displaying Unwanted Scroll Bar for the Single PI Element
- Architectural/Block Diagram, In the Add/Remove Element Button its displaying Unwanted Scroll Bar for the Element whic...
- 02:58 PM Bug #15295: NON-ITAR Users: Users can able to Delete the ITAR PI
- Not an Issue
- 01:44 PM Bug #15286 (Resolved): Perform Audit -> Session is getting expired after publishing audit report by using any template
- 01:38 PM Bug #15246 (Open): There is no status(color) for tentative VAM audit once it is scheduled
- 01:38 PM Bug #15241 (Open): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- 01:38 PM Bug #15240 (Open): Risk value double digit not accepting
- 12:43 PM Bug #15323 (Closed): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- BOM: when selecting descending or Added first the alignment line of the BOM is broken
Refer Screenshot - 12:37 PM Bug #15322 (Closed): Copper Standard Issue: In Main & Main2 D/PFMEA, Multi-Select Issues in the Control Methods Column (Preventive and Detective Controls)
- D/PFMEA, Multi-Select Issues in the Control Methods Column (Preventive and Detective Controls), When the User tries t...
- 12:29 PM Bug #15321 (Closed): Block Diagram: while publish block diagram with approvals, it is not allowing to publish again even after the approver, approved the document
- while publish block diagram with approvals, it is not allowing to publish again even after the approver, approved the...
- 12:24 PM Bug #15320 (Closed): FSR: Add function icon Alignment is not proper
- FSR: Add function icon Alignment is not proper
Refer Screenshot - 12:15 PM Bug #15319 (Closed): Menu:Unwanted menus is displayed when user has only module access.
- Menu:Unwanted menus is displayed when user has only module access.
- 12:08 PM Bug #15306: Block Diagram: When selecting Driver Airbag the context element is not changed to Front impact airbag system
- not on issues
- 12:05 PM Bug #15302: Requirement Tree: While opening failure tree from requirement tree using context menu, the page is not loaded
- Not ale to replicate
- 12:04 PM Bug #15303: Requirement Tree: While opening EFC tree from requirement tree using context menu, the page is not loaded
- Not ale to replicate
- 11:57 AM Bug #15318 (Closed): Safety Goal: ASIL values are not displayed on publishing safety goal document
- Safety Goal: ASIL values is not displayed in published document
Refer Screenshot - 11:56 AM Bug #15317 (Closed): When the user is already added in the "APQP Group" then getting module admin rights for supplier management it shows the Projects and Program menu with view access rights.
- When the user is already added in the "APQP Group" then getting module admin rights for supplier management it shows ...
- 11:43 AM Bug #15283 (Resolved): Folder management: ITAR route label missing
- 11:42 AM Bug #15254 (Resolved): Couldn't able to create an ITAR route from the admin login
- 11:42 AM Bug #15263 (Resolved): New Document Draft: Allowing to select the Non ITAR user as Viewer for ITAR Document
- 11:10 AM Bug #15315 (Open): Functional Analysis: Request Id is not displayed in published document
- 10:56 AM Bug #15315 (Closed): Functional Analysis: Request Id is not displayed in published document
- Functional Analysis: Request Id is not displayed in published document
Refer Screenshot - 11:09 AM Bug #15314 (Open): Interface Type: sample line and color are not displayed while publish interface type
- 10:49 AM Bug #15314 (Closed): Interface Type: sample line and color are not displayed while publish interface type
- Interface Type: Sample line and color in interface type is not displayed in published document
Refer Screenshot - 10:56 AM Bug #15316 (Closed): Audit Status -> Audit Report (Template1) -> IMPROVEMENTS SUGGESTED IN THE SYSTEM field -> The OFI category is not showing the data based on Category
- Audit Status -> Audit Report (Template1)-> IMPROVEMENTS SUGGESTED IN THE SYSTEM field -> The OFI category is not show...
- 10:36 AM Bug #15313 (Closed): Perform Audit -> Upload NC / OFI -> Duplicate category is displayed on CAR category field
- Perform Audit -> Upload NC / OFI -> Duplicate category is displayed on CAR category field .
This is happened only... - 10:31 AM Bug #15312 (Open): Block diagram: when enable automate diagram is Checked the internal elements displays in orange color
- 10:19 AM Bug #15312 (Closed): Block diagram: when enable automate diagram is Checked the internal elements displays in orange color
- Block diagram: when enable automate diagram is Checked the internal elements displays in orange color
refer screen... - 10:31 AM Bug #15311 (Open): while editing comments in item boundaries it is reflected in comments box, only after refreshing the page.
- 10:11 AM Bug #15311 (Closed): while editing comments in item boundaries it is reflected in comments box, only after refreshing the page.
- while editing comments in item boundaries it is reflected in comments box, only after refreshing the page.
- 10:31 AM Bug #15281 (Open): Server error on clicking "Submit to Auditee" button for SAM audit
- 10:31 AM Bug #15278 (Open): SAM audit-Audit status showing No NC by default though NC's has raised
- 10:31 AM Bug #15277 (Open): While Changing From Non ITAR instance to ITAR Instance system does not display Valid validation
- 10:31 AM Bug #15273 (Open): Imported Supplier-Registration not getting completed even though specifying all mandatory fields
- 10:31 AM Bug #15272 (Open): While Changing the Process from In Active to Active or From Active to In Active Displays alert as "Duplicate process"
- 10:31 AM Bug #15271 (Open): Supplier Contact-Issue 1:No action On clicking supplier contact , Issue 2:No option (create,search,deactivae) nothing is working
- 10:31 AM Bug #15270 (Open): On clicking Commodity menu page navigates to Programs screen.Pls refer screen shot
- 10:31 AM Bug #15269 (Open): Label issue in Part tree load by system and subsystem issue.refer screen shot
- 10:31 AM Bug #15268 (Open): Part tree load by System shows Default.refer screen shot
- 10:31 AM Bug #15266 (Open): Part tree load by Commodity shows empty alert if no details in commodity master screen
- 10:31 AM Bug #15265 (Open): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- 10:31 AM Bug #15264 (Open): Legend Status gets disappeared and no part details is showing after creating supplier (given all mandatory fields) .This issue only for supplier which is not imported
- 10:31 AM Bug #15262 (Open): Unable to add part as no add button is showing even after specifying all necessary details in supplier creation(imported supplier)
- 10:31 AM Bug #15261 (Open): Part master screen->Loading is keep on displaying.refer screen shot
- 10:31 AM Bug #15260 (Open): No reason is asking while selecting risks level for newly created supplier(not imported supplier)
- 10:31 AM Bug #15259 (Open): Part Master-Label missing for System,subsystem
- 10:31 AM Bug #15257 (Open): Supplier Template-Empty checkbox is listing (UI issue).Refer screen shot
- 10:31 AM Bug #15252 (Open): Non ITAR users are listing while providing Access to Suite,Site and Module
12/30/2019
- 07:53 PM Bug #15267 (Open): Equipment--> Activity-->CBM-->When edit and saved the specification, the value of min and max is not getting updated. once the page was refreshed, it showing properly
- 02:43 PM Bug #15267 (Closed): Equipment--> Activity-->CBM-->When edit and saved the specification, the value of min and max is not getting updated. once the page was refreshed, it showing properly
- Equipment--> Activity-->CBM-->When edit and saved the specification, the value of min and max is not getting updated....
- 07:52 PM Bug #15306 (Open): Block Diagram: When selecting Driver Airbag the context element is not changed to Front impact airbag system
- 06:07 PM Bug #15306 (Closed): Block Diagram: When selecting Driver Airbag the context element is not changed to Front impact airbag system
- When selecting Driver Airbag the context element is not changed to Front impact airbag system
Refer Screenshot - 07:51 PM Bug #15308 (Open): Block Diagram: Once the comments is added, user not able to delete the comments or leave the comment section blank
- 06:20 PM Bug #15308 (Closed): Block Diagram: Once the comments is added, user not able to delete the comments or leave the comment section blank
- Block Diagram: Once the comments is added, user not able to delete the comments or leave the comment section blank
- 07:50 PM Bug #15309 (Open): Block Diagram: First publish is not displayed in block diagram
- 06:24 PM Bug #15309 (Closed): Block Diagram: First publish is not displayed in block diagram
- Block Diagram: First publish is not displayed in block diagram, it displays contact administrator or technical suppor...
- 07:48 PM Bug #15310 (Open): Block Diagram: When publishing the block diagram several revision, the published document displays the previous revision.
- 06:30 PM Bug #15310 (Closed): Block Diagram: When publishing the block diagram several revision, the published document displays the previous revision.
- Block Diagram: When publishing the block diagram several revision, the published document displays the previous revis...
- 07:46 PM Bug #15296 (Open): When adding BOM elements or on creating. BOM is not added/created.
- 05:15 PM Bug #15296 (Closed): When adding BOM elements or on creating. BOM is not added/created.
- When adding BOM elements or on creating. BOM is not added/created and while clicking on BOM label it is not working.
... - 07:41 PM Bug #15299 (Open): VOC: Search option in requirements is not working properly
- 05:40 PM Bug #15299 (Closed): VOC: Search option in requirements is not working properly
- Search option VOC in requirements is not working properly
Refer Screenshot - 07:41 PM Bug #15300 (Open): Requirement Tree: When flow down/up is done only it is reflecting after the refresh button is pressed
- 05:46 PM Bug #15300 (Closed): Requirement Tree: When flow down/up is done only it is reflecting after the refresh button is pressed
- Requirement Tree: When flow down/up is done only it is reflecting after the refresh button is pressed
Refer Screen... - 07:36 PM Bug #15302 (Open): Requirement Tree: While opening failure tree from requirement tree using context menu, the page is not loaded
- 05:53 PM Bug #15302 (Closed): Requirement Tree: While opening failure tree from requirement tree using context menu, the page is not loaded
- Requirement Tree: While opening failure tree from requirement tree using context menu, the page is not loaded
- 07:35 PM Bug #15303 (Open): Requirement Tree: While opening EFC tree from requirement tree using context menu, the page is not loaded
- 05:55 PM Bug #15303 (Closed): Requirement Tree: While opening EFC tree from requirement tree using context menu, the page is not loaded
- Requirement Tree: While opening EFC tree from requirement tree using context menu, the page is not loaded
Refer Sc... - 07:32 PM Bug #15304 (Open): EFC Tree: Double scroll is displayed on opening EFC tree diagram
- 05:59 PM Bug #15304 (Closed): EFC Tree: Double scroll is displayed on opening EFC tree diagram
- EFC Tree: Double scroll is displayed on EFC tree diagram
Refer Screenshot - 07:31 PM Bug #15254 (Open): Couldn't able to create an ITAR route from the admin login
- 12:47 PM Bug #15254 (Closed): Couldn't able to create an ITAR route from the admin login
- Couldn't able to create an ITAR route from the admin login
- 07:30 PM Bug #15274 (Open): TOC: Need to differentiate ITAR and NON ITAR docs in TOC. Same in Attach From Doc Pro
- 03:08 PM Bug #15274 (Closed): TOC: Need to differentiate ITAR and NON ITAR docs in TOC. Same in Attach From Doc Pro
- TOC: Need to differentiate ITAR and NON ITAR docs in TOC. Same in Attach From Doc Pro
- 07:30 PM Bug #15280 (Open): User replacement: Select user popup: User should display based on ITAR rights, Now its showing both ITAR and NON ITAR users
- 03:34 PM Bug #15280 (Closed): User replacement: Select user popup: User should display based on ITAR rights, Now its showing both ITAR and NON ITAR users
- User replacement: Select user popup: User should display based on ITAR rights, Now its showing both ITAR and NON ITAR...
- 07:29 PM Bug #15283 (Open): Folder management: ITAR route label missing
- 03:46 PM Bug #15283 (Closed): Folder management: ITAR route label missing
- Folder management: ITAR route label missing
- 07:28 PM Bug #15307 (Open): When the ITAR document is moved from one folder to another folder for which ITAR route is not set, then the user can able to revise the ITAR Document w/o ITAR route
- 06:14 PM Bug #15307 (Closed): When the ITAR document is moved from one folder to another folder for which ITAR route is not set, then the user can able to revise the ITAR Document w/o ITAR route
- When the ITAR document is moved from one folder to another folder for which ITAR route is not set, then the user can ...
- 07:26 PM Bug #15251 (Open): New Document Draft - On giving change request by attaching the file(attached below) to the draft document the system keeps loading and displays alert
- 11:47 AM Bug #15251 (Closed): New Document Draft - On giving change request by attaching the file(attached below) to the draft document the system keeps loading and displays alert
- New Document Draft - On giving change request to the draft document the system keeps loading and displays alert
- 07:26 PM Bug #15263 (Open): New Document Draft: Allowing to select the Non ITAR user as Viewer for ITAR Document
- 02:29 PM Bug #15263 (Closed): New Document Draft: Allowing to select the Non ITAR user as Viewer for ITAR Document
- New Document Draft: Allowing to select the Non ITAR user as Viewer for ITAR Document
Case1 :
1.Uncheck ITAR comp... - 07:25 PM Bug #15276 (Open): Pending Request - Documents gets duplicated
- 03:23 PM Bug #15276 (Closed): Pending Request - Documents gets duplicated
- Case
1.Request new document draft
2.Go to actions
3.Select the doc from pending document draft
4.Click on Ch... - 07:24 PM Bug #15256 (Open): In chrome browser it is showing only the training request option for a document in the TOC
- 01:17 PM Bug #15256 (Closed): In chrome browser it is showing only the training request option for a document in the TOC
- In chrome browser it is showing only the training request option for a document in the TOC
- 07:21 PM Bug #15284 (Open): ShowStopper: Non-ITAR User can able to access the ITAR PI Documents
- 03:52 PM Bug #15284 (Closed): ShowStopper: Non-ITAR User can able to access the ITAR PI Documents
- Non-ITAR Users can able to access the ITAR PI Documents, When the Non-ITAR User directly click the Document or tried ...
- 07:21 PM Bug #15292 (Open): NON-ITAR Users: Users can able to Copy and Paste the ITAR PI Segments
- 05:01 PM Bug #15292 (Closed): NON-ITAR Users: Users can able to Copy and Paste the ITAR PI Segments
- NON-ITAR Users can able to Copy and Paste the ITAR PI Segments
- 07:20 PM Bug #15293 (Open): NON-ITAR Users: Users can able to access the Diagrams Tab
- This seems to be ok not seems to be an issue if it is not showing any ITAR information
- 05:08 PM Bug #15293 (Closed): NON-ITAR Users: Users can able to access the Diagrams Tab
- NON-ITAR Users can able to access the Diagrams Tab
- 07:19 PM Bug #15295 (Open): NON-ITAR Users: Users can able to Delete the ITAR PI
- 05:15 PM Bug #15295 (Closed): NON-ITAR Users: Users can able to Delete the ITAR PI
- NON-ITAR can able to Delete the ITAR PI
- 07:18 PM Bug #15298 (Open): ITAR Route: AQuAPro Publish for the ITAR Route is not waiting for the Approvers its allowing for Auto-Publish Approval
- 05:33 PM Bug #15298 (Closed): ITAR Route: AQuAPro Publish for the ITAR Route is not waiting for the Approvers its allowing for Auto-Publish Approval
- In the ITAR Route if the ITAR User Publishing a PI in the Level which having ITAR Route with Approver and that Approv...
- 07:18 PM Bug #15282 (Open): Functional block for Program BOM import
- 06:56 PM Bug #15282: Functional block for Program BOM import
- No clarity on the issues, and no steps is added. Very bad
- 03:36 PM Bug #15282 (Closed): Functional block for Program BOM import
- Not able to create program via BOM import. "String or Binary data would be truncated" error is showing up.
- 07:14 PM Bug #15289 (Open): Multisite -> Process / Activities -> Process - Clause mapping is not working for multisite.
- 04:48 PM Bug #15289 (Closed): Multisite -> Process / Activities -> Process - Clause mapping is not working for multisite.
- Multisite -> Process / Activities -> Process - Clause mapping is not working for multisite - Audit program name is no...
- 07:14 PM Bug #15288 (Open): Entity Creation -> Edit Entity -> System is not allowing to create the same entity across other sites
- 04:20 PM Bug #15288 (Closed): Entity Creation -> Edit Entity -> System is not allowing to create the same entity across other sites
- Entity Creation -> Edit Entity -> System is not allowing to create the same entity across other sites
- 07:03 PM Bug #15305 (Open): Route: Publishing the AQuAPro ITAR PI in the Level which having ITAR & NON-ITAR Route, By Default its taking the NON-ITAR Route
- 06:02 PM Bug #15305 (Closed): Route: Publishing the AQuAPro ITAR PI in the Level which having ITAR & NON-ITAR Route, By Default its taking the NON-ITAR Route
- Publishing the AQuAPro ITAR PI in the Level which having ITAR & NON-ITAR Route, By Default its taking the NON-ITAR Ro...
- 07:01 PM Bug #15253 (Open): Budget Management - Not able to add project expenses - Showing error details when trying to save the budget details.
- 12:15 PM Bug #15253 (Closed): Budget Management - Not able to add project expenses - Showing error details when trying to save the budget details.
- 06:59 PM Bug #15279 (Open): Template to Project Conversion , Project to template conversion- Not working - Showing Undefined error.
- 03:34 PM Bug #15279 (Closed): Template to Project Conversion , Project to template conversion- Not working - Showing Undefined error.
- Template to Project Conversion , Project to template conversion- Not working - Showing Undefined error.
Template t... - 06:58 PM Bug #15294 (Open): Need to change the alert for approved data selection - "Please select approved date."
- 05:09 PM Bug #15294 (Closed): Need to change the alert for approved data selection - "Please select approved date."
- Need to change the alert for approved data selection - "Please select approved date."
- 06:57 PM Bug #15255 (Open): For a completed task, Project manager is able to change the resource selected for a document from the deliverable info dropdown
- 01:01 PM Bug #15255 (Closed): For a completed task, Project manager is able to change the resource selected for a document from the deliverable info dropdown
- For a completed task, Project manager is able to change the resource selected for a document from the deliverable inf...
- 06:54 PM Bug #15290: Not allowing to create projects ,programs by selecting template in charter - Showing error on saving the charter.
- Please add steps to reproduce clearly
- 06:54 PM Bug #15290 (Open): Not allowing to create projects ,programs by selecting template in charter - Showing error on saving the charter.
- 04:57 PM Bug #15290 (Closed): Not allowing to create projects ,programs by selecting template in charter - Showing error on saving the charter.
- Not allowing to create projects ,programs by selecting template in charter. Without out template selection it is savi...
- 06:53 PM Bug #15285 (Open): SP921.1 (Hotfix) -> Perform audit -> Publish for approval / Submit to auditee -> Export to excel : Report content is not getting displayed fully
- 04:09 PM Bug #15285 (Closed): SP921.1 (Hotfix) -> Perform audit -> Publish for approval / Submit to auditee -> Export to excel : Report content is not getting displayed fully
- SP921.1 (Hotfix) -> Perform audit -> Publish for approval / Submit to auditee -> Export to excel : Report content is ...
- 06:53 PM Bug #15286 (Open): Perform Audit -> Session is getting expired after publishing audit report by using any template
- 04:13 PM Bug #15286 (Closed): Perform Audit -> Session is getting expired after publishing audit report by using any template
- Perform Audit -> Session is getting expired after publishing audit report by using any template
- 06:52 PM Bug #15287 (Open): Multisite -> Audit Schedule -> The scheduled audit is displaying as "Awaiting for approval" and its not getting published
- 04:16 PM Bug #15287 (Closed): Multisite -> Audit Schedule -> The scheduled audit is displaying as "Awaiting for approval" and its not getting published
- Multisite -> Audit Schedule -> The scheduled audit is displaying as "Awaiting for approval" and its not getting publi...
- 06:52 PM Bug #15291 (Open): Process / Activities -> Process - Audit Form mapping -> Online form -> Assigned checklist is not displayed. Its showing all the data's
- 05:01 PM Bug #15291 (Closed): Process / Activities -> Process - Audit Form mapping -> Online form -> Assigned checklist is not displayed. Its showing all the data's
- Process / Activities -> Process - Audit Form mapping -> Online form -> Assigned checklist is not displayed. Its showi...
- 03:36 PM Bug #15281 (Closed): Server error on clicking "Submit to Auditee" button for SAM audit
- Server error on clicking "Submit to Auditee" button for SAM audit
- 03:34 PM Bug #15278 (Closed): SAM audit-Audit status showing No NC by default though NC's has raised
- SAM audit-Audit status showing No NC by default though NC's has raised
- 03:33 PM Bug #15277 (Closed): While Changing From Non ITAR instance to ITAR Instance system does not display Valid validation
- While Enabling ITAR compliance alert need to be renamed as “This action will convert the instance to ITAR compliance...
- 03:03 PM Bug #15273 (Closed): Imported Supplier-Registration not getting completed even though specifying all mandatory fields
- Imported Supplier-Registration not getting completed even though specifying all mandatory fields
- 02:59 PM Bug #15272 (Closed): While Changing the Process from In Active to Active or From Active to In Active Displays alert as "Duplicate process"
- While Changing the Process from In Active to Active or From Active to In Active Displays alert as "Duplicate process"
- 02:58 PM Bug #15271 (Closed): Supplier Contact-Issue 1:No action On clicking supplier contact , Issue 2:No option (create,search,deactivae) nothing is working
- Supplier Contact-Issue 1:No action On clicking supplier contact , Issue 2:No option (create,search,deactivae) nothing...
- 02:50 PM Bug #15270 (Closed): On clicking Commodity menu page navigates to Programs screen.Pls refer screen shot
- On clicking Commodity menu page navigates to Programs screen.Pls refer screen shot
- 02:46 PM Bug #15269 (Closed): Label issue in Part tree load by system and subsystem issue.refer screen shot
- Label issue in Part tree load by system and subsystem issue.refer screen shot
- 02:44 PM Bug #15268 (Closed): Part tree load by System shows Default.refer screen shot
- Part tree load by System shows Default.refer screen shot
- 02:43 PM Bug #15266 (Closed): Part tree load by Commodity shows empty alert if no details in commodity master screen
- Part tree load by Commodity shows empty alert if no details in commodity master screen
- 02:32 PM Bug #15265 (Closed): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/VEM.
- 02:29 PM Bug #15264 (Closed): Legend Status gets disappeared and no part details is showing after creating supplier (given all mandatory fields) .This issue only for supplier which is not imported
- Legend Status gets disappeared and no part details is showing after creating supplier (given all mandatory fields) .T...
- 02:27 PM Bug #15262 (Closed): Unable to add part as no add button is showing even after specifying all necessary details in supplier creation(imported supplier)
- Unable to add part as no add button is showing even after specifying all necessary details in supplier creation(impor...
- 02:24 PM Bug #15261 (Closed): Part master screen->Loading is keep on displaying.refer screen shot
- Part master screen->Loading is keep on displaying.refer screen shot
- 02:10 PM Bug #15260 (Closed): No reason is asking while selecting risks level for newly created supplier(not imported supplier)
- No reason is asking while selecting risks level for newly created supplier(not imported supp;ier)
- 02:09 PM Bug #15259 (Closed): Part Master-Label missing for System,subsystem
- Part Master-Label missing for System,subsystem
- 02:06 PM Bug #15257 (Closed): Supplier Template-Empty checkbox is listing (UI issue).Refer screen shot
- Supplier Template-Empty checkbox is listing (UI issue)
- 12:03 PM Bug #15252 (Closed): Non ITAR users are listing while providing Access to Suite,Site and Module
- Non ITAR users are listing while providing Access to Suite,Site and Module
Also available in: Atom