Activity
From 10/25/2019 to 11/23/2019
11/22/2019
- 12:36 PM Bug #14579 (Resolved): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 12:36 PM Bug #14623 (Resolved): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 12:35 PM Bug #14628 (Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
11/21/2019
- 06:38 PM Bug #14603 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 01:12 PM Bug #14726 (Resolved): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- 01:10 PM Bug #14585 (Resolved): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 01:09 PM Bug #14320 (Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
11/13/2019
- 06:40 PM Bug #14870 (Closed): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
- closed in Cy 9
- 02:54 PM Bug #14870 (Resolved): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
11/12/2019
- 06:13 PM Bug #14872 (Closed): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- 06:13 PM Bug #14872 (Fixed with Hotfix): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- not replicated
- 05:42 PM Bug #14872 (Open): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- 01:04 PM Bug #14872 (Closed): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloa...
- 05:42 PM Bug #14870 (Open): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
- 11:54 AM Bug #14870 (Closed): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
- PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflec...
- 05:28 PM Bug #14860 (Closed): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- 11:48 AM Bug #14860 (Resolved): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- 11:39 AM Bug #14860 (Open): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- 05:28 PM Bug #14837 (Closed): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- 05:27 PM Bug #14859 (Closed): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 11:48 AM Bug #14859 (Resolved): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 11:39 AM Bug #14859 (Open): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 03:49 PM Bug #14533 (Closed): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 12:32 PM Bug #14533 (Reopen): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 12:54 PM Bug #14750 (Not Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Still Not able to attach docpro document in meetings by selecting revision document from custom /user defined folder(...
- 12:01 PM Bug #14655 (Resolved): Clicking on the attachments added in forms, shows 500 server error.
11/11/2019
- 06:14 PM Bug #14699 (Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 05:32 PM Bug #14852 (Resolved): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- 04:55 PM Bug #14841 (Fixed with Hotfix): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 11:04 AM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 12:59 PM Bug #14750 (Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- 11:44 AM Bug #14843 (Fixed with Hotfix): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 11:04 AM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 10:03 AM Bug #14837 (Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
11/07/2019
- 05:11 PM Bug #14846: Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Published the ECR form - But document not yet converted
- 03:42 PM Bug #14750 (Not Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- The selected document is not attached to the meeting attachments(attach from Docpro)
- 03:42 PM Bug #14816 (Closed): MR approval is not working after validation and verification completed
- Verified in SP_915 Cy-6 verified MR approval work flow
- 03:41 PM Bug #14828 (Closed): NC category:Irrelevant Nc category is display while raised NC .
- Verified in SP_915 Cy-6
- 03:40 PM Bug #14824 (Closed): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- Verified in CY-6 and Closed
- 03:37 PM Bug #14699 (Not Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 03:30 PM Bug #14841 (In Progress): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:17 PM Bug #14841 (Not Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 10:33 AM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:29 PM Bug #14843 (In Progress): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 03:11 PM Bug #14843 (Not Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- Issue remains the same
- 10:47 AM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 03:19 PM Bug #14856 (Closed): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 10:49 AM Bug #14856 (Resolved): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 10:48 AM Bug #14856 (Open): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 03:03 PM Bug #14517 (Closed): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Working fine
- 03:03 PM Bug #14831 (Closed): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- Working fine
- 03:03 PM Bug #14675 (Closed): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- Working fine
- 02:49 PM Bug #14860: Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- Please let me know the root cause to replicate the issue
- 02:46 PM Bug #14860 (Closed): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- Multi document upload: When uploading multiple docs twice, then when trying to open the latest uploaded document, sho...
- 01:09 PM Bug #14859 (Closed): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 12:35 PM Bug #14418 (Not Resolved): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- Still parts are listing twice after BOM Import. Refer screenshot(duplicate Part)
- 12:29 PM Bug #14480 (Closed): Dont display Supplier in any of the user selection part.
- 12:28 PM Bug #14658 (Closed): Supplier part number is not getting displayed in SCAR form.
- 10:38 AM Bug #14850 (Open): Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error alert is displaying
- Duplicate of #14852
- 10:36 AM Bug #14852 (Open): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- Fixed By sakthi murugan
11/06/2019
- 06:33 PM Bug #14312 (Closed): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 06:25 PM Bug #14591 (Closed): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 06:21 PM Bug #14833 (Closed): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 06:14 PM Bug #14832 (Closed): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 06:13 PM Bug #14835 (Closed): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 06:11 PM Bug #14841 (Not Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 06:06 PM Bug #14842 (Closed): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- Closed in SP915 Cycle 6
- 05:23 PM Bug #14670 (Closed): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 05:23 PM Bug #14721 (Closed): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 05:16 PM Bug #14843 (Not Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 02:30 PM Bug #14810 (Closed): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 02:21 PM Bug #14856 (Closed): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- Popup size is too small where the list is not displayed properly
- 01:46 PM Bug #14852 (Closed): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok...
- 01:14 PM Feature/Enhancement #14741: IE:User popup: when closing the popup before the page loads, throws JS error
- As per Bijoy Request this issue is moving to next Release
- 01:14 PM Feature/Enhancement #14385: User log->when session is expired system is not considering the logout time
- As per Bijoy request this issue is moving to next release
- 01:03 PM Bug #14539 (Closed): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 12:22 PM Bug #14850 (Fixed with Hotfix): Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error alert is displaying
- Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error al...
- 12:12 PM Bug #14805 (Closed): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 12:12 PM Bug #14687 (Closed): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 12:11 PM Bug #14834 (Closed): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 11:57 AM Bug #14837 (Not Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- Alert displaying - The Max length of revision number is 33
- 11:37 AM Bug #14737 (Closed): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 11:32 AM Bug #14839 (Closed): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 11:28 AM Bug #14845 (Closed): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 11:26 AM Bug #14847 (Closed): TOC: Search by document number with prefix is not working
11/05/2019
- 10:09 PM Bug #14655 (In Progress): Clicking on the attachments added in forms, shows 500 server error.
- Not able to find the root cause
- 10:08 PM Bug #14750 (Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Revision number Encoded from Docpro have to decode by All modules
- 09:02 PM Bug #14699 (Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 08:12 PM Feature/Enhancement #14413 (Open): Supplier portal module should be display in social media
- Discuss with sabu and bijoy moving to the next release
- 08:10 PM Bug #14591 (Resolved): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 07:58 PM Bug #14658 (Resolved): Supplier part number is not getting displayed in SCAR form.
- 07:50 PM Bug #14834 (Resolved): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 11:07 AM Bug #14834 (In Progress): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 07:50 PM Bug #14687 (Resolved): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 11:07 AM Bug #14687 (In Progress): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 07:48 PM Bug #14839 (Resolved): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 07:42 PM Bug #14675 (Resolved): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- 07:42 PM Bug #14742 (Resolved): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 02:08 PM Bug #14742 (Not Fixed with Hotfix): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- Cycle 5:Still issue occur in Auditee response in nxP DB
- 06:54 PM Bug #14845 (Resolved): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 03:56 PM Bug #14845 (Open): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 03:55 PM Bug #14845 (Closed): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a s...
- 06:32 PM Bug #14670 (Resolved): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 06:32 PM Bug #14721 (Resolved): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 05:24 PM Bug #14701 (Fixed with Hotfix): Auditee Response: Delete option need to remove in Evidence column
- Verified in cycle 5
- 03:11 PM Bug #14701 (Resolved): Auditee Response: Delete option need to remove in Evidence column
- 05:22 PM Bug #14837 (Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- 05:16 PM Bug #14734 (Closed): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 05:14 PM Bug #14846 (Resolved): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Not able to replicate
- 04:22 PM Bug #14846 (Open): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- 04:05 PM Bug #14846 (Closed): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Not able to attach the document itself in the ECR form when batch process is enabled - Approval is set to the Docpro ...
- 05:11 PM Bug #14847 (Resolved): TOC: Search by document number with prefix is not working
- 05:03 PM Bug #14847 (Open): TOC: Search by document number with prefix is not working
- 04:34 PM Bug #14847 (Closed): TOC: Search by document number with prefix is not working
- TOC: Search by document number with prefix is not working
- 04:54 PM Bug #14762 (Closed): Change working time is not saving- Showing Failed message
- 04:39 PM Bug #14762 (Resolved): Change working time is not saving- Showing Failed message
- 04:51 PM Bug #14737 (Resolved): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 11:44 AM Bug #14737 (Not Resolved): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 04:31 PM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 04:00 PM Bug #14843 (Open): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 02:24 PM Bug #14843 (Closed): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- • Alert must be interchanged. Issue occurs for Below also.
• System allows to drag Focus element and while drop on... - 04:31 PM Bug #14842 (Resolved): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- 03:57 PM Bug #14842 (Open): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- 01:07 PM Bug #14842 (Closed): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- While copying the Element that contains more than one child element, on same level element, diagram is displayed rand...
- 04:31 PM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:56 PM Bug #14841 (Open): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 12:48 PM Bug #14841 (Closed): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- • After minimising the level, page number remains in the same maximum as earlier structure.
• While collapsing fr... - 04:01 PM Bug #14571 (Closed): Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- Not able to attach the document itself in the ECR form when batch process is enabled - and Approval is set to the Doc...
- 03:32 PM Bug #14771 (Closed): Change Management : Document not going for approval even though route is set for the level
- Closed in CY5
- 03:00 PM Bug #14773 (Closed): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- 02:48 PM Bug #14366 (Closed): When the document name contains special character then selecting the document for the change request - No Response
- 02:41 PM Bug #14716 (Closed): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- 02:36 PM Bug #14715 (Closed): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- 02:15 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 02:15 PM Bug #14810 (Resolved): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 11:07 AM Bug #14810 (In Progress): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 02:10 PM Bug #14698 (Closed): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- Fixed
- 02:09 PM Bug #14747 (Closed): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- closed
- 02:07 PM Bug #14466 (Closed): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Verified in cycle5
- 02:07 PM Bug #14814 (Closed): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Verified
- 01:59 PM Bug #14625 (Closed): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 01:58 PM Bug #14827 (Resolved): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 01:00 PM Bug #14827 (Not Resolved): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- Refer Screenshot
- 01:56 PM Bug #14805 (Resolved): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 01:03 PM Bug #14480 (Resolved): Dont display Supplier in any of the user selection part.
- 01:01 PM Bug #14763 (Closed): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 12:41 PM Bug #14836 (Closed): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- 12:03 PM Bug #14761 (Fixed with Hotfix): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 11:53 AM Bug #14517 (Resolved): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- 11:41 AM Bug #14640 (Closed): While clicking on the supplier link from social media page the part details are showing error page.
- Fixed in the build
- 10:40 AM Bug #14640 (Resolved): While clicking on the supplier link from social media page the part details are showing error page.
- 11:40 AM Bug #14697 (Closed): Primary contact person is not added automatically for one supplier(00MagnaCosma)
- Issue closed
- 11:39 AM Bug #14826 (Fixed with Hotfix): Multi site not listing in the dropdown for APQP
- Issue fixed
- 10:11 AM Bug #14825 (Fixed with Hotfix): Group name edit is not working when tried to edit displays some invalid alert for the action done
- 10:05 AM Bug #14829 (Closed): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- Working fine after setting up business rules
- 10:04 AM Bug #14830 (Closed): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
11/04/2019
- 10:57 PM Bug #14824 (Resolved): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- 01:22 PM Bug #14824 (Open): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- 11:27 AM Bug #14824 (Closed): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- 10:57 PM Bug #14825 (Resolved): Group name edit is not working when tried to edit displays some invalid alert for the action done
- 01:22 PM Bug #14825 (Open): Group name edit is not working when tried to edit displays some invalid alert for the action done
- 11:30 AM Bug #14825 (Fixed with Hotfix): Group name edit is not working when tried to edit displays some invalid alert for the action done
- Group name edit is not working when tried to edit displays some invalid alert for the action done
- 10:56 PM Bug #14826 (Resolved): Multi site not listing in the dropdown for APQP
- 01:22 PM Bug #14826 (Open): Multi site not listing in the dropdown for APQP
- 12:09 PM Bug #14826 (Closed): Multi site not listing in the dropdown for APQP
- 1. After giving APQP module rights to Multiple sites Only corporate is showing up in the dropdown
2. If the rights s... - 09:57 PM Bug #14828 (Resolved): NC category:Irrelevant Nc category is display while raised NC .
- 06:56 PM Bug #14828 (Open): NC category:Irrelevant Nc category is display while raised NC .
- 01:54 PM Bug #14828 (Closed): NC category:Irrelevant Nc category is display while raised NC .
- NC category:Irrelevant Nc category is display while raised NC .
- 09:57 PM Bug #14829 (Resolved): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- 02:41 PM Bug #14829 (Open): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- AS discussed Not an issue
- 02:19 PM Bug #14829 (Closed): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- 09:56 PM Bug #14831 (Resolved): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- 06:56 PM Bug #14831 (Open): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- 03:36 PM Bug #14831 (Closed): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so whi...
- 09:56 PM Bug #14517 (In Progress): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- 02:15 PM Bug #14517: "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- After uploading checklists also same "Please fill business rules settings" is getting displayed
- 02:12 PM Bug #14517: "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Able to replicate in corporate site also in CY-5
- 02:11 PM Bug #14517 (Reopen): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Replicated in Cy-5
- 09:55 PM Bug #14816 (Resolved): MR approval is not working after validation and verification completed
- 05:06 PM Bug #14816 (Not Resolved): MR approval is not working after validation and verification completed
- Data not saved error message displayed when clicking on save button in close out page
- 09:55 PM Bug #14761 (Resolved): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 05:07 PM Bug #14761 (Not Resolved): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 09:31 PM Bug #14655: Clicking on the attachments added in forms, shows 500 server error.
- Reproduced in Roopa's machine. Happens in few QA machine too.
- 11:32 AM Bug #14655 (Not Resolved): Clicking on the attachments added in forms, shows 500 server error.
- 07:42 PM Bug #14827 (Resolved): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 01:22 PM Bug #14827 (Open): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 01:13 PM Bug #14827 (Closed): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and repu...
- 07:18 PM Bug #14713 (Closed): Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying declaration details(user name and job title)
- 07:18 PM Bug #14712 (Closed): IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
- 07:03 PM Bug #14436 (Closed): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 07:03 PM Bug #14832 (Resolved): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 06:56 PM Bug #14832 (Open): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 03:38 PM Bug #14832 (Closed): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- • After collapsing the subsystem element in Collapsed form and again expanding it displays arrow . While clicking on ...
- 07:03 PM Bug #14833 (Resolved): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 04:48 PM Bug #14833 (Open): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 03:46 PM Bug #14833 (Closed): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- Tooltip for Legend Icon is displayed in two different forms. - This issue occurs in all the Browsers
- 06:57 PM Bug #14839 (Open): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 05:10 PM Bug #14839 (Closed): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowi...
- 06:57 PM Bug #14837 (Open): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- 05:03 PM Bug #14837 (Closed): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" ins...
- 06:57 PM Bug #14834 (Open): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 03:48 PM Bug #14834 (Closed): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- Block Diagram: When assigning values in Show item boundaries and check Enable Automate diagram, the external element ...
- 06:11 PM Bug #14698 (Fixed with Hotfix): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- Verified in cycle5
- 06:09 PM Bug #14742 (Fixed with Hotfix): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- Verified in cycle 5
- 06:08 PM Bug #14747 (Fixed with Hotfix): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- 06:08 PM Bug #14747: NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- Verified in cycle4
- 06:08 PM Bug #14814 (Fixed with Hotfix): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 06:05 PM Bug #14814: Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Verified in Cycle5
- 06:06 PM Bug #14466 (Fixed with Hotfix): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- 06:05 PM Bug #14466: Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Verified in cycle4
- 06:04 PM Bug #14815 (Fixed with Hotfix): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- Verified in cycle5
- 05:46 PM Bug #14312 (Resolved): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 05:24 PM Bug #14727 (Closed): Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not displaying against the created One
- Verified in SP_916 CY-5
- 05:23 PM Bug #14751 (Closed): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- Issue verified in SP_916 CY-6
- 05:22 PM Bug #14734 (Resolved): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 05:16 PM Bug #14539 (In Progress): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 02:39 PM Bug #14539 (Not Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- Refer Screen Shot
- 05:14 PM Bug #14836 (Resolved): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- This is not an issue (working as per functionality)
- 05:13 PM Bug #14836 (Open): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- 04:01 PM Bug #14836 (Closed): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- When Assigning connection line and pattern value from one element to another and remove the element using Add/Remove ...
- 05:13 PM Bug #14704 (Closed): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- 05:11 PM Bug #14756 (Closed): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- Verified in Sp_915 CY-5
- 05:11 PM Bug #14770 (Closed): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- Verified in Sp_915 CY-5
- 05:10 PM Bug #14749 (Closed): LPA : Add audit activities is not displaying the latest mapped process
- Verified in Sp_915 CY-5
- 05:10 PM Bug #14561 (Closed): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- Verified in Sp_915 CY-5
- 05:09 PM Bug #14530 (Closed): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- Verified in Sp_915 CY-5
- 05:09 PM Bug #14748 (Closed): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- 05:07 PM Bug #14690 (Closed): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- 02:47 PM Bug #14690 (Resolved): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- 05:06 PM Bug #14802 (Closed): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- 05:06 PM Bug #14813 (Closed): Process/Activities : Site option is missing in process/activities
- Agree with dev team.
- 05:04 PM Bug #14685 (Closed): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- 05:04 PM Bug #14835 (Resolved): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 04:20 PM Bug #14835 (Open): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 03:51 PM Bug #14835 (Closed): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 05:03 PM Bug #14688 (Closed): HARA : Alignment is not proper in HARA Document
- 05:02 PM Bug #14688 (Resolved): HARA : Alignment is not proper in HARA Document
- 02:49 PM Bug #14688 (In Progress): HARA : Alignment is not proper in HARA Document
- 02:40 PM Bug #14688 (Open): HARA : Alignment is not proper in HARA Document
- 02:39 PM Bug #14688 (New): HARA : Alignment is not proper in HARA Document
- 02:38 PM Bug #14688 (Future Release): HARA : Alignment is not proper in HARA Document
- Very Important and Critical issues. Already informed to the dev team. Since the dev team needs to change interface it...
- 04:59 PM Bug #14677 (Closed): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 04:56 PM Bug #14705 (Closed): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- 04:55 PM Bug #14708 (Closed): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 04:54 PM Bug #14760 (Closed): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- 04:53 PM Bug #14764 (Closed): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- 04:50 PM Bug #14766 (Closed): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 04:48 PM Bug #14691 (Closed): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 04:47 PM Bug #14541 (Closed): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 04:39 PM Bug #14673 (Closed): Action:Document review:Document number link not showing the attached document, its showing some other document
- 04:27 PM Bug #14674 (Closed): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- Working fine hence closing this defect
- 04:07 PM Bug #14830 (Resolved): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- 04:07 PM Bug #14830 (Open): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- Close as per your comments
- 03:09 PM Bug #14830: Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- Working fine
- 03:05 PM Bug #14830 (Closed): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- 04:05 PM Bug #14592 (Closed): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:03 PM Bug #14678 (Closed): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 03:56 PM Bug #14803 (Closed): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- Closed in SP915 Cycle 5
- 03:55 PM Bug #14804 (Closed): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- Closed in SP915 Cycle 5
- 03:46 PM Bug #14692 (Closed): Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, page keeps on loading in chrome
- 03:24 PM Bug #14810: FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- Refer Screenshot
- 03:23 PM Bug #14810 (Not Resolved): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 03:23 PM Bug #14810 (Resolved): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 01:22 PM Bug #14810 (Open): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 03:20 PM Bug #14738 (Closed): Groups:Supplier users are listed in the groups
- 03:17 PM Bug #14672 (Closed): New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unterminated string constant" in IE and the alert displays like "Invalid or unexpected token" in chrome
- 03:14 PM Bug #14387 (Closed): Suite: First name,middle name,last name separation is not valid
- Working fine.Hence closing this defect
- 03:13 PM Bug #14817 (Closed): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- Working fine.Hence closing this defect
- 03:13 PM Bug #14818 (Closed): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- 03:13 PM Bug #14818: Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- Working fine.Hence closing this defect
- 03:13 PM Bug #14819 (Closed): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- Working fine.Hence closing this defect
- 03:12 PM Bug #14820 (Closed): Supplier Management: Repeat audit not getting generated for VAM audit
- Working fine.Hence closing this defect
- 10:07 AM Bug #14820 (Resolved): Supplier Management: Repeat audit not getting generated for VAM audit
- 10:06 AM Bug #14820 (Open): Supplier Management: Repeat audit not getting generated for VAM audit
- Shift issue
- 03:12 PM Bug #14821 (Closed): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- Working fine.Hence closing this defect
- 03:12 PM Bug #14822 (Closed): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- Working fine.Hence closing this defect
- 03:11 PM Bug #14823 (Closed): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- Working fine
- 10:05 AM Bug #14823 (Resolved): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- 10:05 AM Bug #14823 (Open): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- Issue in integrated with docpro module
- 02:51 PM Bug #14739 (Closed): P-Diagram - Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
- 02:44 PM Bug #14696 (Closed): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 02:43 PM Bug #14695 (Closed): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 02:41 PM Bug #14480 (Not Resolved): Dont display Supplier in any of the user selection part.
- Still Supplier Users are getting displayed in Deploy Goals and objectives page user selection
- 02:31 PM Bug #14687 (Not Resolved): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 02:21 PM Bug #14723 (Closed): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- 02:20 PM Bug #14658 (Open): Supplier part number is not getting displayed in SCAR form.
- 02:19 PM Bug #14658 (TBD): Supplier part number is not getting displayed in SCAR form.
- 02:20 PM Bug #14744 (Closed): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 02:17 PM Bug #14669 (Closed): In Supplier page, Clicking on the the imported supplier name shows Server error.
- 01:30 PM Bug #14689 (Closed): TOC: When clicking on Training request, shows error(only when the document name has special characters like "Document G~!@#$%^&*()_+{}"|:?><")
- 01:22 PM Bug #14805 (Open): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 01:17 PM Bug #14728 (Closed): New document request: Should not allow the user to select the level and publish document when the site is not selected(same in Document relations screen)
- 01:16 PM Bug #14729 (Closed): Activity log not showing the log details when the document is moved and reset across/within sites and moved within sites
- 01:09 PM Bug #14693 (Closed): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- Closed in SP915 Cycle 5
- 01:04 PM Bug #14694 (Closed): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- Closed in SP915 Cycle 5
- 01:04 PM Bug #14717 (Closed): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- Closed in SP915 Cycle 5
- 01:03 PM Bug #14722 (Closed): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- Closed in SP915 Cycle 5
- 01:03 PM Bug #14724 (Closed): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- Closed in SP915 Cycle 5
- 12:57 PM Bug #14746 (Closed): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- Closed in SP915 Cycle 5
- 12:51 PM Bug #14765 (Closed): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- Closed in SP915 Cycle 5
- 12:50 PM Bug #14767 (Closed): Process VDA - Delete Characteristics is not working as expected
- Closed in SP915 Cycle 5
- 12:35 PM Bug #14799 (Closed): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- This issue is fixed so closing this issue on 04.11.2019
- 12:34 PM Bug #14773 (Yet to Verify): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- 12:32 PM Bug #14551 (Closed): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- This issue is fixed so closing this issue in cycle-5 on 04.11.2019
- 12:03 PM Bug #14772 (Closed): Trade: When clicking on trade menu, it showing with loading status
- Verified and closed this issue on cycle 5
- 11:59 AM Bug #14743 (Closed): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 11:58 AM Bug #14721 (Not Resolved): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- From Concern initial evaluation page, adding attachment and clicking on save has the same behavior
- 11:52 AM Bug #14676 (Closed): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- 11:41 AM Bug #14533 (Closed): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- Closed in Cycle5
- 11:40 AM Bug #14681 (Closed): Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is Attach rights and View History
- Closed in Cycle5
- 11:26 AM Bug #14670 (Not Resolved): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 11:16 AM Bug #14400 (Closed): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
11/03/2019
- 05:03 PM Bug #14818 (Resolved): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- WAD
- 05:02 PM Bug #14818 (Open): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- Already other user assigned level for supplier . Find Screenshot
- 02:59 PM Bug #14818 (Closed): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- Supplier management->Business rules->Level set up in audit pro is reflectd in supplier management business rules leve...
- 04:07 PM Bug #14817 (Resolved): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- 04:07 PM Bug #14817 (Open): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- This issue is already in 9.1.2
- 02:58 PM Bug #14817 (Closed): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- 03:58 PM Bug #14819 (Resolved): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- 03:58 PM Bug #14819 (Open): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- Issue
- 03:00 PM Bug #14819 (Closed): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to aud...
- 03:51 PM Bug #14821 (Resolved): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- 03:51 PM Bug #14821 (Open): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- Not an issue. WAD
- 03:03 PM Bug #14821 (Closed): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map enti...
- 03:39 PM Bug #14822 (Resolved): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- 03:38 PM Bug #14822 (Open): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- Not an issue.WAD
- 03:04 PM Bug #14822 (Closed): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- 03:07 PM Bug #14823 (Closed): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local mac...
- 03:05 PM Bug #14675 (Not Resolved): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- Able to replicate in CY-5
- 03:01 PM Bug #14820 (Closed): Supplier Management: Repeat audit not getting generated for VAM audit
- Supplier Management: Repeat audit not getting generated for VAM audit
- 12:08 PM Bug #14771 (Resolved): Change Management : Document not going for approval even though route is set for the level
- 12:08 PM Bug #14366 (Resolved): When the document name contains special character then selecting the document for the change request - No Response
- 12:08 PM Bug #14699: When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- There is an issue populating from Form service (Error in saving file in DB) even though change management sends an al...
11/02/2019
- 07:10 PM Bug #14815 (Resolved): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- Fixed for Effectiveness holiday calculation. Rest we don't have any changes
- 02:08 PM Bug #14815 (In Progress): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- 02:07 PM Bug #14815 (Open): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- 07:42 AM Bug #14815 (Closed): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- Audito/Auditee:Holiday should count during calculate the response target date,closed out date and effectiveness date
- 06:49 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:46 PM Bug #14592 (Not Fixed with Hotfix): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 02:23 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 06:49 PM Bug #14804 (Resolved): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- 06:49 PM Bug #14804 (Open): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- 06:41 PM Bug #14764 (Resolved): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- 06:41 PM Bug #14760 (Resolved): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- 06:41 PM Bug #14705 (Resolved): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- 06:41 PM Bug #14704 (Resolved): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- 06:38 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 06:38 PM Bug #14687 (Resolved): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 06:38 PM Bug #14685 (Resolved): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- 06:37 PM Bug #14723 (Resolved): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- 06:37 PM Bug #14744 (Resolved): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 06:01 PM Bug #14738 (Resolved): Groups:Supplier users are listed in the groups
- 06:00 PM Bug #14813 (Resolved): Process/Activities : Site option is missing in process/activities
- This is not an issue..Please check the "Is Process Site Specific" checkbox in Administrator settings page to show the...
- 05:41 PM Bug #14766 (Yet to Verify): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:40 PM Bug #14766 (Resolved): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:18 PM Bug #14766 (Not Fixed with Hotfix): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:24 PM Bug #14724 (Fixed with Hotfix): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 05:19 PM Bug #14767 (Yet to Verify): Process VDA - Delete Characteristics is not working as expected
- 05:17 PM Bug #14694 (Yet to Verify): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 05:14 PM Bug #14694 (Resolved): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 04:54 PM Bug #14694 (Not Fixed with Hotfix): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 05:16 PM Bug #14799 (Yet to Verify): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 05:15 PM Bug #14799 (Resolved): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 02:53 PM Bug #14799 (Not Fixed with Hotfix): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 05:01 PM Bug #14541 (Fixed with Hotfix): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 04:56 PM Bug #14691 (Fixed with Hotfix): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 04:55 PM Bug #14693 (Fixed with Hotfix): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 04:53 PM Bug #14722 (Fixed with Hotfix): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 04:53 PM Bug #14746 (Fixed with Hotfix): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 04:53 PM Bug #14765 (Fixed with Hotfix): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- 02:23 PM Bug #14765 (Resolved): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- 04:45 PM Bug #14814 (Resolved): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Refer the screen shot
- 02:07 PM Bug #14814 (In Progress): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 04:43 PM Bug #14678 (Fixed with Hotfix): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 04:39 PM Bug #14717 (Fixed with Hotfix): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 02:50 PM Bug #14803 (Fixed with Hotfix): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- 02:22 PM Bug #14803 (Resolved): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- 02:22 PM Bug #14803 (Open): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- 02:16 PM Bug #14655 (Resolved): Clicking on the attachments added in forms, shows 500 server error.
- Verified. Working as expected
- 02:08 PM Bug #14816 (Resolved): MR approval is not working after validation and verification completed
- 02:07 PM Bug #14816 (Open): MR approval is not working after validation and verification completed
- 09:11 AM Bug #14816 (Closed): MR approval is not working after validation and verification completed
- Bussiness Rule: MR approval is not working after validation and verification completed
- 02:07 PM Bug #14466 (Resolved): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- 08:02 AM Bug #14466 (Reopen): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Still the issue occur in cycle 4.Reopening this issue
- 02:06 PM Bug #14698 (Resolved): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- 02:02 PM Bug #14742 (Resolved): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 11:29 AM Bug #14669 (Resolved): In Supplier page, Clicking on the the imported supplier name shows Server error.
- 11:28 AM Bug #14676 (Resolved): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- 11:28 AM Bug #14400 (Resolved): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 09:22 AM Bug #14773 (Resolved): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
11/01/2019
- 08:43 PM Bug #14806 (Resolved): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- 05:40 PM Bug #14806 (Open): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- 04:59 PM Bug #14806 (Closed): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact perso...
- 08:43 PM Bug #14366: When the document name contains special character then selecting the document for the change request - No Response
- We have encoded the string and change management needs to decode the string. Docpro change done change management cod...
- 08:42 PM Bug #14813 (Open): Process/Activities : Site option is missing in process/activities
- 06:19 PM Bug #14813 (Closed): Process/Activities : Site option is missing in process/activities
- Process/Activities : Site option is missing in process/activities
- 08:42 PM Bug #14814 (Open): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 06:48 PM Bug #14814 (Closed): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 08:41 PM Bug #14751 (Resolved): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- 09:18 AM Bug #14751 (Open): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- 08:41 PM Bug #14533 (Resolved): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 08:40 PM Bug #14625 (Resolved): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 06:15 PM Bug #14625 (Not Resolved): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 08:38 PM Bug #14655: Clicking on the attachments added in forms, shows 500 server error.
- Please provide details to replicate the issue
- 07:57 PM Bug #14695 (Resolved): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 06:16 PM Bug #14695 (Not Fixed with Hotfix): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- Still facing the same issue
- 09:51 AM Bug #14695 (Resolved): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 09:18 AM Bug #14695 (Open): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 07:57 PM Bug #14696 (Resolved): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 06:16 PM Bug #14696 (Not Fixed with Hotfix): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- It is not fixed in Training request from Doc Pro
- 01:15 PM Bug #14696 (Resolved): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 09:18 AM Bug #14696 (Open): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 07:43 PM Bug #14799 (Resolved): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 03:02 PM Bug #14799 (Open): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 02:36 PM Bug #14799 (Closed): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- In the Structure Analysis, by doing the Right-Click activity on the displayed Arrow Connection its displaying JS Erro...
- 06:52 PM Bug #14708 (Resolved): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 04:00 PM Bug #14708 (In Progress): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 06:42 PM Bug #14717 (Resolved): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 03:35 PM Bug #14717 (In Progress): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 09:18 AM Bug #14717 (Open): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 06:42 PM Bug #14767 (Resolved): Process VDA - Delete Characteristics is not working as expected
- 09:18 AM Bug #14767 (Open): Process VDA - Delete Characteristics is not working as expected
- 06:33 PM Bug #14750: Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Also for the attached documents from docpro the document name is showing "%20" instead of blank space -> Fixed.
- 09:18 AM Bug #14750 (Open): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- 06:16 PM Bug #14763 (Fixed with Hotfix): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 04:18 PM Bug #14763 (Resolved): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 09:18 AM Bug #14763 (Open): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 06:07 PM Bug #14772 (Resolved): Trade: When clicking on trade menu, it showing with loading status
- 03:02 PM Bug #14772 (Open): Trade: When clicking on trade menu, it showing with loading status
- 11:34 AM Bug #14772 (Closed): Trade: When clicking on trade menu, it showing with loading status
- Trade: When clicking on trade menu, it showing with loading status.
The predefined status is not displayed - 05:56 PM Bug #14541 (Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 05:55 PM Bug #14691 (Resolved): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 05:55 PM Bug #14693 (Resolved): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 05:55 PM Bug #14694 (Resolved): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 05:54 PM Bug #14722 (Resolved): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 05:53 PM Bug #14724 (Resolved): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 11:06 AM Bug #14724 (In Progress): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 05:52 PM Bug #14746 (Resolved): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 11:04 AM Bug #14746 (In Progress): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 05:42 PM Bug #14802 (Resolved): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- As per the discussion with QA, It's not an Issue
- 05:40 PM Bug #14802 (Open): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- 03:41 PM Bug #14802 (Closed): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- 05:41 PM Bug #14678 (Resolved): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 05:31 PM Bug #14810 (Closed): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- In FSR at top left corner when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
Re... - 05:29 PM Bug #14766 (Resolved): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:22 PM Bug #14756 (Resolved): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- Not able to replicate checked with QA
- 09:18 AM Bug #14756 (Open): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- 05:09 PM Bug #14551 (Fixed with Hotfix): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- 04:22 PM Bug #14551 (Resolved): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- Fixed and patches ready for hotfix testing
- 04:54 PM Bug #14365 (Closed): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 04:41 PM Bug #14365 (Resolved): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 04:19 PM Bug #14748 (Resolved): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- 09:18 AM Bug #14748 (Open): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- 04:00 PM Bug #14686 (Closed): Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- unable to replicate.hence closing this defect
- 03:58 PM Bug #14805 (Closed): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- Search Option is not Working in Below document
>VOC
>Functional Analysis
>Hazard and Risk Analysis and
>TSR - 03:58 PM Bug #14804 (Closed): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- 03:50 PM Bug #14721 (Resolved): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 09:18 AM Bug #14721 (Open): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 03:45 PM Bug #14560 (Closed): PDF disable: When viewing the deleted document from actions, shows error
- closed in cy4
- 03:44 PM Bug #14803 (Closed): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- While collapsing the element which is already in expanded form and again expanding it, arrow is not displayed.
- 03:21 PM Bug #14764: EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- When two or more functions are added, the header is displayed for each function
- 09:18 AM Bug #14764 (Open): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- 03:02 PM Bug #14771 (Open): Change Management : Document not going for approval even though route is set for the level
- 11:24 AM Bug #14771 (Closed): Change Management : Document not going for approval even though route is set for the level
- Change Management : Document not going for approval even though route is set for the level
Also current revision n... - 03:02 PM Bug #14773 (Open): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- 11:37 AM Bug #14773 (Closed): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- TOC: Revision history summary: Print Icon is not displayed for the supported file type. Print icon is displayed for P...
- 02:52 PM Bug #14383 (Closed): Search is not working in Widget settings either by using search window or else through search grid
- 02:51 PM Bug #14436 (Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 02:44 PM Bug #14418 (Resolved): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- 01:20 PM Bug #14674 (Resolved): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- 01:17 PM Bug #14558 (Closed): In Edge browser - ECR number is shown as link
- 01:08 PM Bug #14770 (Resolved): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- 01:07 PM Bug #14770 (Open): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- 10:15 AM Bug #14770 (Closed): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully...
- 12:11 PM Bug #14737 (Resolved): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 09:18 AM Bug #14737 (Open): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 12:10 PM Bug #14677 (Resolved): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 11:17 AM Bug #14716 (Resolved): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- 09:18 AM Bug #14716 (Open): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- 11:17 AM Bug #14715 (Resolved): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- 09:18 AM Bug #14715 (Open): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- 10:49 AM Bug #14743 (Resolved): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 09:18 AM Bug #14743 (Open): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 10:02 AM Bug #14480 (Resolved): Dont display Supplier in any of the user selection part.
- 09:55 AM Bug #14557 (Closed): After Rejecting the ECR form - it shows alert- Already rejected.
- 09:18 AM Bug #14765 (Open): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- 09:18 AM Bug #14762 (Open): Change working time is not saving- Showing Failed message
- 09:18 AM Bug #14760 (Open): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- 09:18 AM Bug #14744 (Open): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 09:18 AM Bug #14742 (Open): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 09:18 AM Feature/Enhancement #14741 (Open): IE:User popup: when closing the popup before the page loads, throws JS error
- 09:18 AM Bug #14739 (Open): P-Diagram - Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
- 09:18 AM Bug #14738 (Open): Groups:Supplier users are listed in the groups
- 09:18 AM Bug #14734 (Open): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 09:18 AM Bug #14726 (Open): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- 09:18 AM Bug #14723 (Open): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- 09:18 AM Feature/Enhancement #14720 (Open): The "customize email messages" and business rules in Supplier PPAP is not yet module specific
- 09:18 AM Bug #14713 (Open): Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying declaration details(user name and job title)
- 09:18 AM Bug #14712 (Open): IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
10/31/2019
- 09:40 PM Bug #14766 (In Progress): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 07:42 PM Bug #14766 (Open): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 06:00 PM Bug #14766 (Closed): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- While deleting a failure in one block system is deleting the failure in the other block.
- 07:08 PM Bug #14761 (Resolved): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 06:20 PM Bug #14761 (Open): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 05:31 PM Bug #14761 (Closed): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated
- 06:39 PM Bug #14436 (Not Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 06:39 PM Bug #14436: Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- if Effectiveness is "no", Data need to display,if Effectiveness is "no".
It should show the current status. - 06:34 PM Bug #14571 (Resolved): Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- 06:16 PM Bug #14360 (Closed): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 05:08 PM Bug #14360 (Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 04:03 PM Bug #14360 (Not Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 04:02 PM Bug #14360: Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- Default status should not be as not verified.Kindly remove it.
- 06:08 PM Bug #14675 (Resolved): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- 06:08 PM Bug #14343 (Closed): Template ->Audit plan template created Custom field for planned audit is displaying in number format though it is not defined
- 06:08 PM Bug #14670 (Resolved): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 06:06 PM Bug #14383 (Not Resolved): Search is not working in Widget settings either by using search window or else through search grid
- 06:05 PM Bug #14767 (Closed): Process VDA - Delete Characteristics is not working as expected
- Delete Characteristics is not working before deleting Failure.
- 06:04 PM Bug #14365 (Not Resolved): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 06:00 PM Bug #14630 (Closed): Report : Findings report->Bench mark field does not display frequently modified data
- 06:00 PM Bug #14630: Report : Findings report->Bench mark field does not display frequently modified data
- Verified in report also in cycle 4
- 05:57 PM Suggestion #14364 (Closed): Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- 05:53 PM Feature/Enhancement #14413 (Not Resolved): Supplier portal module should be display in social media
- Administration setting is set to social media as per Raghu Ram comment but still activities soes not displays "Suppli...
- 05:48 PM Bug #14404 (Closed): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 05:47 PM Bug #14765 (Closed): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- Issue occurs while adding Characteristics/Effect/Failure/Cause, before adding Process Item Function and Work Element ...
- 05:45 PM Bug #14764 (Closed): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- In EFC tree the Element is displayed isolated without any interline connection and the function/requirement displayed...
- 05:43 PM Bug #14376 (Closed): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 05:39 PM Bug #14617 (Closed): Master folder tag allows to save duplicate data
- 05:34 PM Bug #14763 (Closed): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- If the user tries to create training request from Doc Pro, if the Document name is having special character then the ...
- 05:32 PM Bug #14762 (Closed): Change working time is not saving- Showing Failed message
- Change working time is not saving- Showing Failed message
- 05:12 PM Bug #14432 (Closed): Findings Report ->Benchmark data is not displayed in Findings Reports.
- verified in cycle 4
- 05:08 PM Bug #14714 (Closed): Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- 05:08 PM Bug #14714: Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- Not able replicate, closing this isue
- 05:00 PM Bug #14714 (Resolved): Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- 04:53 PM Bug #14760 (Closed): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- While opening one tree diagram to another tree diagram using context menu by right click, the maximize button is not ...
- 04:43 PM Bug #14320: Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:42 PM Bug #14576: Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:42 PM Bug #14579: Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:41 PM Bug #14585: Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:41 PM Bug #14603: Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:41 PM Bug #14623: Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:41 PM Bug #14628: Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 04:40 PM Bug #14726: Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- As discussed with Dev Team, Context menu for Process VDA will be changed in similar to Design VDA. So this issue will...
- 12:04 PM Bug #14726 (Closed): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- Edit Effect option is listed in Functional Analysis Context menu
- 04:40 PM Bug #14353 (Closed): Email for Effectiveness For Findings -> Email subject is wrong.
- Verified in cycle 4
- 04:35 PM Bug #14541 (Not Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- Edit Characteristics is reflected only in Tree/Table view.
- 04:34 PM Bug #14561 (Resolved): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- Not an issue. Kindly check both the status.
- 03:53 PM Bug #14561 (Not Resolved): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 04:25 PM Bug #14530 (Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- working as expected. Check ML-010. Newly created Manufacturing Line
- 03:48 PM Bug #14530 (Not Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- I have created a new manufacturing line but does not show up
- 01:19 PM Bug #14530 (Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- Create New manufacturing line and Verify
- 12:42 PM Bug #14530 (Not Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- Now Manufacturing line itself is not listing thought checklist is assigned in LPA schedule screen
- 04:25 PM Bug #14724 (Open): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 11:58 AM Bug #14724 (Closed): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- Mozilla - Context menu for following pages are not good.
• Process VDA - Functional/Failure Analysis
• Design VD... - 04:24 PM Bug #14746 (Open): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 03:02 PM Bug #14746 (Closed): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- Legend icon for Flow Down/Up Indicator is not good
- 04:06 PM Bug #14747 (Resolved): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- 04:05 PM Bug #14747 (Open): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- 03:18 PM Bug #14747 (Closed): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that...
- 04:04 PM Bug #14756 (Closed): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- 04:01 PM Bug #14749 (Resolved): LPA : Add audit activities is not displaying the latest mapped process
- 04:00 PM Bug #14749 (Open): LPA : Add audit activities is not displaying the latest mapped process
- 03:19 PM Bug #14749 (Closed): LPA : Add audit activities is not displaying the latest mapped process
- dd audit activities is not displaying the latest mapped process
- 03:55 PM Bug #14359 (Closed): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 03:51 PM Bug #14359 (Fixed with Hotfix): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- Verified in cycle 4
- 03:54 PM Bug #14363 (Closed): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 03:53 PM Bug #14562 (Closed): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 03:46 PM Bug #14322 (Closed): LPA : Automatic findings is not displayed the Remarks/objective evidence field entered data in NC filling screen
- 03:42 PM Bug #14693 (In Progress): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 03:36 PM Bug #14308 (Closed): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 03:36 PM Bug #14308: Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- Verified in cycle 4
- 03:35 PM Bug #14686: Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- WAD
- 12:34 PM Bug #14686 (Resolved): Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- 03:34 PM Bug #14751 (Closed): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be...
- 03:34 PM Bug #14750 (Not Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Not able to attach docpro document in meetings by selecting revision document from custom /user defined folder
Also ... - 03:18 PM Bug #14748 (Closed): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- Attach the Profile Picture for the first user and Save using "Save and Add"
create a Second user and Click Save b... - 03:16 PM Bug #14727 (Resolved): Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not displaying against the created One
- 03:15 PM Bug #14727 (Open): Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not displaying against the created One
- 12:05 PM Bug #14727 (Closed): Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not displaying against the created One
- Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not disp...
- 03:09 PM Bug #14662 (Closed): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- 03:07 PM Bug #14672 (Resolved): New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unterminated string constant" in IE and the alert displays like "Invalid or unexpected token" in chrome
- 03:06 PM Bug #14681 (Resolved): Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is Attach rights and View History
- 03:06 PM Bug #14689 (Resolved): TOC: When clicking on Training request, shows error(only when the document name has special characters like "Document G~!@#$%^&*()_+{}"|:?><")
- 03:04 PM Bug #14673 (Resolved): Action:Document review:Document number link not showing the attached document, its showing some other document
- 03:02 PM Bug #14692 (Resolved): Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, page keeps on loading in chrome
- 02:59 PM Bug #14728 (Resolved): New document request: Should not allow the user to select the level and publish document when the site is not selected(same in Document relations screen)
- 02:58 PM Bug #14728 (Open): New document request: Should not allow the user to select the level and publish document when the site is not selected(same in Document relations screen)
- 12:07 PM Bug #14728 (Closed): New document request: Should not allow the user to select the level and publish document when the site is not selected(same in Document relations screen)
- New document request: Should not allow the user to select the level when the site is not selected
- 02:58 PM Bug #14729 (Resolved): Activity log not showing the log details when the document is moved and reset across/within sites and moved within sites
- cannot replicate
- 02:58 PM Bug #14729 (Open): Activity log not showing the log details when the document is moved and reset across/within sites and moved within sites
- 12:26 PM Bug #14729 (Closed): Activity log not showing the log details when the document is moved and reset across/within sites and moved within sites
- Activity log not showing the log details when the document is moved across/within sites
- 02:56 PM Bug #14691 (In Progress): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 02:54 PM Bug #14678 (In Progress): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 02:48 PM Bug #14744 (Closed): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple...
- 02:45 PM Bug #14743 (Closed): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 02:44 PM Bug #14742 (Closed): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- Auditee Response: Not able to enter the data in Root cause description fields
- 02:39 PM Feature/Enhancement #14741 (Open): IE:User popup: when closing the popup before the page loads, throws JS error
- IE:User popup: when closing the popup before the page loads, throws JS error
- 02:35 PM Bug #14739 (Closed): P-Diagram - Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
- Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
Refer Screenshot - 02:32 PM Bug #14738 (Closed): Groups:Supplier users are listed in the groups
- Groups:Supplier users are listed in the groups
- 02:28 PM Bug #14694 (In Progress): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 02:27 PM Bug #14581: Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- Sabu insist to Close the issue
- 02:26 PM Bug #14581 (Closed): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- 01:49 PM Bug #14581 (Resolved): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- 11:56 AM Bug #14581 (Not Resolved): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- Document owner and Document level is not listed
- 02:26 PM Bug #14481 (Closed): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 02:25 PM Bug #14737 (Closed): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 02:20 PM Bug #14722 (In Progress): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 01:55 PM Bug #14722 (Open): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 11:51 AM Bug #14722 (Closed): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- While clicking any item in LHS and RHS views, system removes the Topic segment from the header. On reloading it is di...
- 02:05 PM Bug #14456 (Closed): Reports: In the PI field its displaying the PI name as 2 times
- 02:05 PM Bug #14454 (Closed): Reports: Reports is not displaying as User Specific
- Working as Expected
- 01:13 PM Bug #14454 (Resolved): Reports: Reports is not displaying as User Specific
- 02:02 PM Bug #14734 (Closed): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 01:03 PM Bug #14536 (Closed): LPA : Auditor and Auditee availability email is not generating
- 12:57 PM Bug #14312 (Reopen): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- Except IE browser it is not fixed
- 12:51 PM Bug #14697 (Resolved): Primary contact person is not added automatically for one supplier(00MagnaCosma)
- 12:50 PM Bug #14428 (Closed): LPA :Holiday alert is not displayed when selected the day which is holiday
- 12:24 PM Bug #14351 (Closed): Report : Final Inspection and Capture History reports are not opening
- Closed in Cy4
- 12:10 PM Bug #14626 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Replicate issue
- 12:02 PM Bug #14658 (Yet to Verify): Supplier part number is not getting displayed in SCAR form.
- 12:00 PM Bug #14315 (Closed): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 11:56 AM Bug #14723 (Closed): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
It creates two fie... - 11:51 AM Bug #14721 (Closed): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is...
- 11:49 AM Feature/Enhancement #14720 (Open): The "customize email messages" and business rules in Supplier PPAP is not yet module specific
- Clicking on "customize email messages" showing Sorry, an error occurred while processing your request.
Discussed al... - 11:11 AM Bug #14625 (Yet to Verify): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 11:04 AM Bug #14717 (Closed): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- While click on one field, system focuses on the concurrent field also.
- 10:58 AM Bug #14716 (Closed): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- Change Management : When the change request is initiated from suite and publishing it from Change request status then...
- 10:45 AM Bug #14715 (Closed): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Defa...
- 10:33 AM Bug #14519 (Closed): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- Verified and closed this issue
10/30/2019
- 07:35 PM Bug #14662 (Resolved): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- 07:35 PM Bug #14630 (Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- 07:35 PM Bug #14626 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 07:35 PM Bug #14562 (Resolved): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 07:35 PM Bug #14561 (Resolved): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- 07:35 PM Bug #14541 (Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 03:53 PM Bug #14541: Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- Edited Characteristics is displayed for other operation above the existing block.
- 07:35 PM Bug #14536 (Resolved): LPA : Auditor and Auditee availability email is not generating
- 07:35 PM Bug #14530 (Resolved): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- 07:35 PM Bug #14519 (Resolved): PM Supervisor calendar--> Planned Maintenance details--> When a user tries to request the spare part from the WO, it displays error message
- 07:35 PM Bug #14432 (Resolved): Findings Report ->Benchmark data is not displayed in Findings Reports.
- 07:35 PM Bug #14428 (Resolved): LPA :Holiday alert is not displayed when selected the day which is holiday
- 07:35 PM Bug #14404 (Resolved): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 07:35 PM Bug #14387 (Resolved): Suite: First name,middle name,last name separation is not valid
- 07:35 PM Bug #14363 (Resolved): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- 07:35 PM Bug #14360 (Resolved): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 07:35 PM Bug #14359 (Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 07:35 PM Bug #14353 (Resolved): Email for Effectiveness For Findings -> Email subject is wrong.
- 07:35 PM Bug #14351 (Resolved): Report : Final Inspection and Capture History reports are not opening
- 07:35 PM Bug #14308 (Resolved): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- 07:32 PM Bug #14699 (Open): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 05:23 PM Bug #14699 (Closed): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- When the document is drag and dropped or attached twice for the any change initiated document then it takes both the ...
- 07:31 PM Suggestion #14702 (Open): Alert updation while selecting template via charter/Bom or add supplier option
- 05:33 PM Suggestion #14702 (Open): Alert updation while selecting template via charter/Bom or add supplier option
- While creating a program by selecting both charter template and BOM/supplier template getting alert "You have select...
- 07:31 PM Bug #14714 (Open): Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- 07:08 PM Bug #14714 (Closed): Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in Audit program
- Consolidating finding Reports:NC/OFI findings will not displayed in reports based on the Clause Mandatory for NC in A...
- 07:31 PM Bug #14685 (Open): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- 03:16 PM Bug #14685 (Closed): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- When we select particular elements in Add/Remove elements or while we select the context element as focus element it ...
- 07:30 PM Bug #14687 (Open): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 03:47 PM Bug #14687 (Closed): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- Internal element for parent is displayed outside the Block diagram
When we drag the internal element inside the P... - 07:30 PM Bug #14688 (Open): HARA : Alignment is not proper in HARA Document
- 03:54 PM Bug #14688 (Closed): HARA : Alignment is not proper in HARA Document
- Alignment is not good in HARA Document
Refer Screenshot - 07:30 PM Bug #14690 (Open): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- 04:06 PM Bug #14690 (Closed): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- The Indicators are not displayed in Flow Indicator Details for all Tree diagrams and in VOC
Refer Screenshot - 07:29 PM Bug #14704 (Open): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- 05:40 PM Bug #14704 (Closed): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each ...
- 06:51 PM Bug #14705 (Open): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- 05:43 PM Bug #14705 (Closed): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
Refer Screenshot - 06:50 PM Bug #14708 (Open): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 05:53 PM Bug #14708 (Closed): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- Failure Tree Diagram: At the Right Top Corner the Indicator Details are hidden in Failure tree diagram
Refer Scree... - 06:46 PM Bug #14673 (Open): Action:Document review:Document number link not showing the attached document, its showing some other document
- 12:37 PM Bug #14673 (Closed): Action:Document review:Document number link not showing the attached document, its showing some other document
- Action:Document review:Document number link not showing the attached document, its showing some other document
- 06:46 PM Bug #14689 (Open): TOC: When clicking on Training request, shows error(only when the document name has special characters like "Document G~!@#$%^&*()_+{}"|:?><")
- 04:04 PM Bug #14689 (Closed): TOC: When clicking on Training request, shows error(only when the document name has special characters like "Document G~!@#$%^&*()_+{}"|:?><")
- TOC: When clicking on Training request, shows error
- 06:46 PM Bug #14692 (Open): Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, page keeps on loading in chrome
- 04:07 PM Bug #14692 (Closed): Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, page keeps on loading in chrome
- Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, ...
- 06:45 PM Bug #14694 (Open): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 04:26 PM Bug #14694 (Closed): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- Context menu label for Delete Failure displays THL
- 06:45 PM Bug #14693 (Open): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 04:09 PM Bug #14693 (Closed): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- Delete characteristics is displaying JS error
- 06:45 PM Bug #14691 (Open): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 04:07 PM Bug #14691 (Closed): Process VDA - Functional Analysis - Edit Characteristics is not working.
- Edited Characteristics are not reflected anywhere.
- 06:45 PM Bug #14678 (Open): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 02:26 PM Bug #14678 (Closed): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- After deleting a requirement, system displays only the Function of the Deleted requirement without displaying all oth...
- 06:39 PM Bug #14698 (Open): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- 05:22 PM Bug #14698 (Closed): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- Auditee Response: It should allow to upload the file which has special character in Evidence attachment
1) Login a... - 06:38 PM Bug #14701 (Open): Auditee Response: Delete option need to remove in Evidence column
- 05:31 PM Bug #14701 (Closed): Auditee Response: Delete option need to remove in Evidence column
- Auditee Response: Delete option need to remove.
- 06:36 PM Bug #14674 (Open): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- 12:38 PM Bug #14674 (Closed): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- 06:36 PM Bug #14686 (Open): Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- 03:37 PM Bug #14686 (Closed): Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in ...
- 06:35 PM Bug #14697 (Open): Primary contact person is not added automatically for one supplier(00MagnaCosma)
- 05:22 PM Bug #14697 (Closed): Primary contact person is not added automatically for one supplier(00MagnaCosma)
- Primary contact person is not added automatically for one supplier(00MagnaCosma)
- 06:32 PM Bug #14628 (Open): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 06:32 PM Bug #14628 (New): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 06:32 PM Bug #14623 (Open): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 06:32 PM Bug #14623 (New): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 06:32 PM Bug #14603 (Open): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 06:32 PM Bug #14603 (New): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 06:32 PM Bug #14585 (Open): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 06:32 PM Bug #14585 (New): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 06:32 PM Bug #14579 (Open): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 06:32 PM Bug #14579 (New): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 06:32 PM Bug #14576 (Open): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 06:32 PM Bug #14576 (New): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 06:32 PM Bug #14320 (Open): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 06:12 PM Bug #14320 (New): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 05:10 PM Bug #14320 (Not Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 03:10 PM Bug #14320 (Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 06:20 PM Bug #14250 (Closed): Checklist screen->Color code selection against the Checkpoints should not displays Hex Code like "fffff" or any other
- Verified inc cycle 4
- 06:18 PM Bug #14421 (Closed): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 06:16 PM Bug #14294 (Closed): While approving the respective action in approver login displays dual window after approver
- 06:16 PM Bug #14294: While approving the respective action in approver login displays dual window after approver
- Verified in Cycle 4
- 06:16 PM Bug #14515 (Closed): VAM audit-Checklists total score calculation is wrong.Please find screen shot attached
- working fine
- 06:15 PM Bug #14518 (Closed): Import Checklists->Assigning score details for a parent checklists not getting applicable to its child (checkpoints)
- working fine
- 06:15 PM Bug #14713 (Closed): Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying declaration details(user name and job title)
- Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying decl...
- 06:09 PM Bug #14712 (Closed): IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
- IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
- 06:09 PM Bug #14096 (Closed): Click to view report is not displaying audit status and audit date
- Verified in cycle4
- 06:07 PM Bug #14615 (Closed): Process VDA: Search functionality is not working
- 06:07 PM Bug #14526 (Closed): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 06:06 PM Bug #14550 (Closed): Remarks/Objective Evidence field does not display entered data when retrieved
- 06:06 PM Bug #14550: Remarks/Objective Evidence field does not display entered data when retrieved
- Verified in Cycle 4
- 05:55 PM Bug #14298 (Closed): Process VDA - There is no option to add Severity for the added Effect.
- 05:49 PM Bug #14350 (Closed): NXP->Existing Scheduled Audit ->"Data Cannot be displayed" error displayed when clciking on "Submit to auditee" button
- Verified in cycle 4
- 05:43 PM Bug #14382 (Closed): When creating a supplier project in APQP and logged in as Supplier user then in the social media widget it shows the APQP Project listing under that but when redirecting to the listing page it is showing the blank project listing.
- 05:42 PM Bug #14461 (Yet to Verify): Assign Checklist-> Max and min button need to displayed in assign checklist page
- Need discuss with bijoy
- 05:38 PM Bug #14634 (Closed): In APQP Mail - Site URL and Document URL not displayed fully.
- 05:36 PM Bug #14663 (Closed): Archive a project created via Import Excel option and check under Archived project list the project is missing
- 05:36 PM Bug #14663 (Fixed with Hotfix): Archive a project created via Import Excel option and check under Archived project list the project is missing
- Closed in Build itself
- 05:25 PM Bug #14663 (Open): Archive a project created via Import Excel option and check under Archived project list the project is missing
- 05:36 PM Bug #14672 (Open): New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unterminated string constant" in IE and the alert displays like "Invalid or unexpected token" in chrome
- 12:32 PM Bug #14672 (Closed): New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unterminated string constant" in IE and the alert displays like "Invalid or unexpected token" in chrome
- New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unte...
- 05:35 PM Bug #14677 (Open): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 01:11 PM Bug #14677 (Closed): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 05:28 PM Bug #14284 (Closed): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- 05:28 PM Bug #14514 (Closed): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- 05:27 PM Bug #14380 (Closed): The document viewer publish is not working getting object reference not set error
- 05:26 PM Bug #14524 (Closed): Created a program with same part/supplier with 2 different location. In the project charter page both the details are showing up.- High priority Issue
- 05:26 PM Bug #14527 (Closed): After creating a Program/Project along with the selected supplier users the admin user of another supplier is also listing in the Groups, Project owners/ Resource list.
- 05:26 PM Bug #14643 (Closed): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- 05:26 PM Bug #14651 (Closed): Allowing to add multiple suppliers in a project via Add supplier button
- 05:25 PM Bug #14596 (Closed): The buttons in the meetings page is showing as disabled( Issue with Supplier PPAP only)
- 05:25 PM Bug #14676 (Open): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- 12:56 PM Bug #14676 (Closed): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated. After creating a nested con...
- 05:25 PM Bug #14675 (Open): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- 12:42 PM Bug #14675 (Closed): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able...
- 05:25 PM Bug #14670 (Open): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 11:55 AM Bug #14670 (Closed): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 05:25 PM Bug #14669 (Open): In Supplier page, Clicking on the the imported supplier name shows Server error.
- 11:36 AM Bug #14669 (Closed): In Supplier page, Clicking on the the imported supplier name shows Server error.
- In Supplier page, Clicking on the the imported supplier name shows Server error.
- 05:22 PM Bug #14302 (Closed): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 05:15 PM Bug #14696 (Closed): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- New training request->Training required date->unable to open a calendar to pick a date
- 05:09 PM Bug #14390 (Closed): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 05:09 PM Bug #14565 (Closed): change Management: In the Add Document Tree Level the draft is listed.
- 05:08 PM Bug #14564 (Closed): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 05:00 PM Bug #14695 (Closed): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- Improper alert is getting displayed if no rating value is specified only rating description has entered
- 04:57 PM Bug #14513 (Closed): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- 04:56 PM Bug #14528 (Closed): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 04:55 PM Bug #14480 (Reopen): Dont display Supplier in any of the user selection part.
- Still Supplier Users are getting displayed in Productivity Gain menu, Name dropdown
- 04:49 PM Bug #14584 (Closed): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 04:49 PM Bug #14523 (Closed): Action Management: Action name is displaying twice.
- 04:49 PM Bug #14266 (Closed): Change Management : Added documents is not listed in the ECR form to initiate Change Request.
- 04:30 PM Bug #14522 (Closed): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 04:27 PM Bug #14537 (Closed): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 04:17 PM Bug #14525 (Closed): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- 04:16 PM Bug #14570 (Closed): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 04:10 PM Bug #14538 (Closed): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 04:02 PM Bug #14540 (Closed): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 04:00 PM Bug #14457 (Closed): Multi site->Audit program: Remove this alert message for clause in multi site
- Verified in Cycle 4
- 03:59 PM Bug #14452 (Closed): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 03:46 PM Bug #14533 (Not Fixed with Hotfix): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 03:41 PM Bug #14582 (Closed): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- 03:41 PM Bug #14600 (Closed): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- 03:36 PM Bug #14543 (Closed): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- Closed in SP915 Cycle 4
- 03:34 PM Bug #14544 (Closed): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 03:19 PM Bug #14548 (Closed): Process VDA - Topic segment is not changed even after changing the Production Item
- Closed in SP915 Cycle 4
- 03:18 PM Bug #14554 (Closed): Document name with special character and custom revision not working as expected.
- Clicking on document name with the custom revision number - showing alert - Revision not available.--- - Issue closed...
- 03:17 PM Bug #14552 (Closed): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- Closed in SP915 Cycle 4
- 03:15 PM Bug #14553 (Closed): Design and Process VDA - Percentage allocation displays 7th Step
- Closed in SP915 Cycle 4
- 03:15 PM Bug #14556 (Closed): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- Closed in SP915 Cycle 4
- 03:09 PM Bug #14559 (Closed): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- Closed in SP915 Cycle 4
- 03:08 PM Bug #14566 (Closed): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 03:02 PM Bug #14366 (Not Resolved): When the document name contains special character then selecting the document for the change request - No Response
- Facing Same issue
- 02:59 PM Bug #14471 (Closed): Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- 02:59 PM Bug #14221 (Closed): Production Inprocess: All Search is not working if Production Inprocess is enabled in IC Settings
- 02:57 PM Bug #14567 (Closed): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- Closed in SP915 Cycle 4
- 02:55 PM Bug #14592 (In Progress): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 12:56 PM Bug #14592 (Not Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 02:54 PM Bug #14681 (Open): Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is Attach rights and View History
- 02:52 PM Bug #14681 (Closed): Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is Attach rights and View History
- Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is At...
- 02:52 PM Bug #14569 (Closed): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- Closed in SP915 Cycle 4
- 02:50 PM Bug #14572 (Closed): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- Closed in SP915 Cycle 4
- 02:48 PM Bug #14578 (Closed): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 02:42 PM Bug #14591 (Not Fixed with Hotfix): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 02:33 PM Bug #14609 (Closed): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- Closed in SP915 Cycle 4
- 02:32 PM Bug #14612 (Closed): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- Closed in SP915 Cycle 4
- 02:31 PM Bug #14547 (Closed): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- 02:31 PM Bug #14619 (Closed): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- 02:30 PM Bug #14539 (Not Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- Refer Screenshot
- 02:28 PM Bug #14618 (Closed): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- Closed in SP915 Cycle 4
- 02:25 PM Bug #14434 (Closed): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 02:17 PM Bug #14555 (Closed): Initiate Concern: When the Supplier was selected from the dropdown list its displaying JS Error
- This Issue is fixed so closing this issue in SP915 Cycle-4 on 30.10.2019
- 01:05 PM Bug #14620 (Closed): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- Closed in SP915 Cycle 4
- 01:04 PM Bug #14621 (Closed): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- Closed in SP915 Cycle 4
- 01:03 PM Bug #14624 (Closed): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- Closed in SP915 Cycle 4
- 12:59 PM Bug #14357 (Closed): Cant able to create Nested concern for PSD approach.
- 12:47 PM Bug #14458 (Closed): Search Inspection Entry:Inprocess Inspection sheet is not displaying
- Closed in Cy4
- 12:46 PM Bug #14534 (Closed): Unable to create concern from Inspection control
- Closed in Cy4
- 12:46 PM Bug #14535 (Closed): On clicking on Chart hyperlink in Receiving Inspection sheet server error pop-up is displayed
- Closed in Cy4
- 12:46 PM Bug #14437 (Closed): Inprocess Inspection sheet is not opening from supervisor approval menu
- Closed in Cy 4
- 12:31 PM Bug #14405 (Closed): For the BOM Level 0 it is showing incorrect data in the gantt page after importing the Program
- 12:30 PM Bug #14367 (Closed): when program is created using BOM Import then SQE ,SQM not added in the " PM " group and Supplier users not added in the "Resource" Group.
- 12:24 PM Bug #14275 (Closed): SB-190910324 In similar concern pop up Cancel button is not working.
- 12:24 PM Bug #14368 (Closed): For the concerns created from IC, without making any changes in concern form asks " New Concern form for category and sub category has been changed. Do you want new form changes?"
- 12:08 PM Bug #14381 (Closed): In Part Element, if the user selects part number by searching it, then the failure mode associated with part is not getting populated in Failure mode Element.
- 11:59 AM Bug #14400 (Not Resolved): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 11:58 AM Bug #14520 (Closed): In Business Rules page, the concern number definition shows "Sorry an error occurred" error message.
- 11:58 AM Bug #14521 (Closed): Concern number is not getting created long with Category code.
- 11:57 AM Bug #14568 (Closed): For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested approach until root causes and permanent corrective actions are identified!" even though root cause and corrective actions are provided.
- As Discussed with Sabu: Removed Initiate Nested Concern button. Because in Supplier side they wont create concern for...
- 11:56 AM Bug #14573 (Closed): The concern is created along with supplier and part number, but logging in as supplier user not shows the created concern.
- 11:56 AM Bug #14574 (Closed): In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- 11:55 AM Bug #14305 (Closed): Convert a Template to project and add document for the deliverable - Not able to view the document by the resource.
- 11:55 AM Bug #14529 (Closed): Not able to paste the data copied from excel in the Project Name field it shows incorrect alert.
10/29/2019
- 08:39 PM Bug #14513 (Resolved): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- 08:05 PM Bug #14513 (In Progress): EFC Tree: the indicator shows flowdown has done even the flow down has not done
- 08:23 PM Bug #14634 (Resolved): In APQP Mail - Site URL and Document URL not displayed fully.
- 08:23 PM Bug #14643 (Resolved): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- 08:09 PM Bug #14454 (In Progress): Reports: Reports is not displaying as User Specific
- 08:09 PM Bug #14436 (Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 03:07 PM Bug #14436 (Not Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- Issue 1 :
Column Selection - we need option in Effectiveness Due date,Effectiveness Status,Effectiveness Comments,Be... - 07:41 PM Suggestion #14364 (Resolved): Meetings-> Hand icon is needed for date and time pickers while creating a new meeting
- 07:41 PM Bug #14365 (Resolved): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 07:36 PM Bug #14547 (Resolved): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- 07:19 PM Bug #14547 (In Progress): FSR: when deleting the decomposed function and requirement ASIL, it does not revert back to the old ASIL value
- 07:36 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 04:57 PM Bug #14539 (In Progress): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 04:06 PM Bug #14539 (Not Fixed with Hotfix): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- Refer Screenshot
- 07:21 PM Bug #14284 (Resolved): EFC Tree - When we open failure tree, then clicking Extend/Intend Arrow for the Subsystem element on top level its hiding all the below level Subsystem elements.
- 07:20 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:54 PM Bug #14592 (In Progress): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:48 PM Bug #14592 (Not Fixed with Hotfix): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 03:45 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 07:20 PM Bug #14567 (Resolved): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 05:08 PM Bug #14567 (Not Fixed with Hotfix): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 07:07 PM Bug #14619 (Resolved): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- 10:45 AM Bug #14619 (In Progress): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- 06:54 PM Bug #14461 (Resolved): Assign Checklist-> Max and min button need to displayed in assign checklist page
- UI issue is there for maximize button. Need to check whether it need to be included or not
- 06:38 PM Bug #14481 (Resolved): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 02:46 PM Bug #14481 (Future Release): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 02:45 PM Bug #14481 (Not Resolved): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 02:43 PM Bug #14481 (Resolved): Please check the description.Mail should be generated from primary module admin to all the admins, but its generating only to primary module admin
- 06:37 PM Bug #14421 (Fixed with Hotfix): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 06:34 PM Bug #14298 (Fixed with Hotfix): Process VDA - There is no option to add Severity for the added Effect.
- 06:31 PM Bug #14566 (Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 06:13 PM Bug #14566 (Resolved): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 05:13 PM Bug #14566 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 06:29 PM Bug #14615 (Fixed with Hotfix): Process VDA: Search functionality is not working
- 04:06 PM Bug #14615 (Resolved): Process VDA: Search functionality is not working
- 03:40 PM Bug #14615 (Not Fixed with Hotfix): Process VDA: Search functionality is not working
- 10:40 AM Bug #14615 (Resolved): Process VDA: Search functionality is not working
- 06:28 PM Bug #14302 (Fixed with Hotfix): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 11:12 AM Bug #14302 (Resolved): Process VDA - Structure Analysis - Filter Dropdown for Operation and FourM category is not working properly.
- 06:26 PM Bug #14320 (Not Fixed with Hotfix): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 06:23 PM Bug #14582 (Fixed with Hotfix): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- 11:32 AM Bug #14582 (Resolved): TOC:Page is not redirected fully to actions screen when revising the document from document info link. Same occurs when completing the document needing revision action, but couldn't replicate it after that
- 06:22 PM Bug #14526 (Fixed with Hotfix): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 06:22 PM Bug #14537 (Yet to Verify): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 05:41 PM Bug #14537 (Resolved): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- After the build it will fixed
- 05:22 PM Bug #14537 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- Refer Screenshot
- 06:20 PM Bug #14538 (Fixed with Hotfix): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 06:18 PM Bug #14540 (Fixed with Hotfix): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 06:15 PM Bug #14548 (Fixed with Hotfix): Process VDA - Topic segment is not changed even after changing the Production Item
- While changing from Focus element dropdown it is not changed
- 06:06 PM Bug #14452 (Fixed with Hotfix): When the document name and number has special characters like "<Test document>" then its not displaying the document name in document management alone and the document number is null in TOC as well as doc management
- 06:06 PM Bug #14533 (Fixed with Hotfix): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 06:05 PM Bug #14541 (Fixed with Hotfix): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 05:56 PM Bug #14543 (Fixed with Hotfix): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- 05:53 PM Bug #14544 (Fixed with Hotfix): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 05:50 PM Bug #14600 (Fixed with Hotfix): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- 04:02 PM Bug #14600 (Resolved): Site drop down should be unique.when the user preference is set as Doc Pro , then its showing corporate by default in site drop down, but when the user clicks on doc pro, it shows Chennai site by default.
- The Default site loaded for the user will be the site in which that user was created.
- 05:35 PM Bug #14311 (Closed): Effectiveness for findings: Audit programs effective due days are not saving
- Verified
- 05:23 PM Bug #14522 (Fixed with Hotfix): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 05:23 PM Bug #14552 (Fixed with Hotfix): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 05:22 PM Bug #14553 (Fixed with Hotfix): Design and Process VDA - Percentage allocation displays 7th Step
- 05:21 PM Bug #14658 (Resolved): Supplier part number is not getting displayed in SCAR form.
- 02:27 PM Bug #14658 (Open): Supplier part number is not getting displayed in SCAR form.
- 12:47 PM Bug #14658 (Closed): Supplier part number is not getting displayed in SCAR form.
- Supplier part number is not getting displayed in SCAR form even though supplier part number is mapped in the concern.
- 05:19 PM Bug #14556 (Fixed with Hotfix): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- 05:17 PM Bug #14559 (Fixed with Hotfix): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- 05:05 PM Bug #14569 (Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- 05:03 PM Bug #14612 (Fixed with Hotfix): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 04:09 PM Bug #14612 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 03:45 PM Bug #14612 (Not Fixed with Hotfix): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 04:59 PM Bug #14572 (Fixed with Hotfix): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- Remove option for severity is removed
- 11:56 AM Bug #14572 (Resolved): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- 10:48 AM Bug #14572 (In Progress): Process VDA- Failure Analysis - Severity rating is allowed to removed from Tree/Table view while edit from Diagrammatic view.
- 04:51 PM Bug #14578 (Fixed with Hotfix): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 04:50 PM Bug #14245 (Closed): Perform Audit -> Audit Plan Activities -> The system should allow to add only one process for a row
- Verified in Cycle 3
- 04:45 PM Bug #14357 (Resolved): Cant able to create Nested concern for PSD approach.
- 04:44 PM Bug #14568 (Resolved): For concern with SCAR approach, if the users clicks on initiate nested concern shows alert as "Cannot initiate nested approach until root causes and permanent corrective actions are identified!" even though root cause and corrective actions are provided.
- 03:58 PM Bug #14609 (Fixed with Hotfix): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 03:55 PM Bug #14591 (Fixed with Hotfix): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 03:42 PM Bug #14380 (Resolved): The document viewer publish is not working getting object reference not set error
- 03:36 PM Bug #14464 (Closed): Manufacturing process audit-> Multi date is not working in manufacturing process audit Template
- Verified
- 03:36 PM Bug #14618 (Fixed with Hotfix): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 03:32 PM Bug #14434 (Resolved): In Productivity Evaluation sheet -> Productivity Monitoring sheet, after selecting the user badge no, department nd Designation not working as expected.
- 03:27 PM Bug #14625 (Resolved): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- old label is correct as discussed with smitha
- 03:24 PM Bug #14581 (Resolved): Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- 03:19 PM Bug #14620 (Fixed with Hotfix): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- 03:18 PM Bug #14389 (Closed): Linking supplier primary contact responsible for all tasks is not working
- 12:05 PM Bug #14389 (Resolved): Linking supplier primary contact responsible for all tasks is not working
- WAD. It supports only for program
- 03:10 PM Bug #14557 (Resolved): After Rejecting the ECR form - it shows alert- Already rejected.
- 03:08 PM Bug #14390 (Fixed with Hotfix): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 01:38 PM Bug #14390 (Resolved): Tree Diagram: where ever we do right click on tree diagram system opens context menu
- 03:08 PM Bug #14621 (Fixed with Hotfix): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- Indicators are not displayed in the Legend Popup
- 02:58 PM Bug #14662 (Fixed with Hotfix): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- 02:58 PM Bug #14662 (Open): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- 02:37 PM Bug #14662 (Closed): Preferences - Unable to Login after assigning the Session Time out as 0. (Refer description)
- When the Session Time Out is set as 0, system displays the Alert 'Session Timeout time should be in between 1 to 99'
... - 02:58 PM Bug #14383 (Resolved): Search is not working in Widget settings either by using search window or else through search grid
- 02:46 PM Bug #14628 (Future Release): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 02:45 PM Bug #14628 (Not Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 02:44 PM Bug #14628 (Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 10:55 AM Bug #14628 (WAD): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 02:46 PM Bug #14623 (Future Release): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 02:45 PM Bug #14623 (Not Resolved): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 02:43 PM Bug #14623 (Resolved): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 10:54 AM Bug #14623 (WAD): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 02:46 PM Bug #14603 (Future Release): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:45 PM Bug #14603 (Not Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:43 PM Bug #14603 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:40 PM Bug #14603 (WAD): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:40 PM Bug #14603 (Open): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:39 PM Bug #14603 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:39 PM Bug #14603 (In Progress): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:39 PM Bug #14603 (TBD): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 02:46 PM Bug #14585 (Future Release): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 02:45 PM Bug #14585 (Not Resolved): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 02:43 PM Bug #14585 (Resolved): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 11:01 AM Bug #14585 (WAD): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 02:46 PM Bug #14579 (Future Release): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 02:45 PM Bug #14579 (Not Resolved): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 02:43 PM Bug #14579 (Resolved): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 10:55 AM Bug #14579 (WAD): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 02:46 PM Bug #14576 (Future Release): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:45 PM Bug #14576 (Not Resolved): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:43 PM Bug #14576 (Resolved): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:38 PM Bug #14576 (WAD): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:37 PM Bug #14651 (Resolved): Allowing to add multiple suppliers in a project via Add supplier button
- 02:27 PM Bug #14651 (Open): Allowing to add multiple suppliers in a project via Add supplier button
- 11:57 AM Bug #14651 (Closed): Allowing to add multiple suppliers in a project via Add supplier button
- Allowing to add multiple suppliers in a project via Add supplier button.
- 02:37 PM Bug #14663 (Closed): Archive a project created via Import Excel option and check under Archived project list the project is missing
- 1. Archive a project created via Import Excel option and check under Archived project list the project is missing(APQ...
- 02:27 PM Bug #14276 (Closed): When the user is used in Supplier PPAP for more than 1 site then for APQP module the user is able to see the site dropdown.
- 02:27 PM Bug #14655 (Open): Clicking on the attachments added in forms, shows 500 server error.
- 12:39 PM Bug #14655 (Resolved): Clicking on the attachments added in forms, shows 500 server error.
- Clicking on the attachments added in forms, shows 500 server error.
- 12:50 PM Bug #14514 (Fixed with Hotfix): EFC tree: OK button is hidden when fetching on the Flow down function and requirement in the indicator click
- 12:42 PM Bug #14555 (Resolved): Initiate Concern: When the Supplier was selected from the dropdown list its displaying JS Error
- 12:41 PM Bug #14315 (Resolved): In all concern status page, for SCAR forms the TIES,TCPS,TICAS,TCCS status are not getting displayed.
- 12:25 PM Bug #14525 (Fixed with Hotfix): Tree Diagrams: Undo and Redo button is not working in Tree diagram
- Undo and Redo Option has been Removed by Development Team with the authority of there Higher management Decision in S...
- 12:21 PM Bug #14528 (Fixed with Hotfix): Tree Diagrams: When clicking on Toggle fullscreen Mode it contains large white space at the bottom of the page
- 12:18 PM Bug #14624 (Fixed with Hotfix): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- 11:54 AM Bug #14554 (Fixed with Hotfix): Document name with special character and custom revision not working as expected.
- 11:35 AM Bug #14554 (Resolved): Document name with special character and custom revision not working as expected.
- h3. Clicking on document name with the custom revision number - showing alert - Revision not available.---*fixed*
- 11:44 AM Bug #14376 (Resolved): Entity->Assign process->tool tip for entity is displaying as "Undefined"
- 11:32 AM Bug #14617 (Resolved): Master folder tag allows to save duplicate data
- 10:57 AM Bug #14570 (Resolved): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- 10:34 AM Bug #14570 (Not Fixed with Hotfix): Multi Language RFD - When click on indicator in tree diagram, the alert option cancel should be converted in delete button for both chinese and Spanish
- Refer Screenshot
- 10:41 AM Bug #14471 (Fixed with Hotfix): Multi site : Final Inspection Scheduling - After saving the schedule its not getting displayed
- Closed in Cy3
- 10:17 AM Bug #14379 (Closed): For SQE, SQM and supplier primary contact person - Program is not listing when it is created using the BOM Import.
10/28/2019
10/25/2019
- 08:05 PM Bug #14596 (Resolved): The buttons in the meetings page is showing as disabled( Issue with Supplier PPAP only)
- Change in LoadMeeting.cshtml
- 07:30 PM Bug #14567 (Resolved): Process VDA - Failure Analysis - Severity rating added in diagrammatic view is updated only on refreshing Tree/Table view
- 06:53 PM Bug #14585: Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- Nre
- 06:01 PM Bug #14624 (Resolved): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- 04:02 PM Bug #14624 (Open): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- 12:27 PM Bug #14624 (Closed): Design VDA - Failure Analysis - Severity Rating is not listed in the Dropdown in Add Design Effect Master table.
- Severity Rating is not listed in the drop down in Add Design Effect Master table.
- 05:55 PM Bug #14543 (Resolved): Process VDA - Failure Analysis - Delete Characteristics and Delete Failure options are not available in Diagrammatic view context menu
- 05:50 PM Bug #14275 (Resolved): SB-190910324 In similar concern pop up Cancel button is not working.
- 05:45 PM Bug #14320 (Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- dupliacion issues
- 05:39 PM Bug #14592 (In Progress): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 05:37 PM Bug #14522 (Resolved): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 03:21 PM Bug #14522 (In Progress): Process VDA: Double-Vertical Scroll Bar is displaying for the Segment Selection Window
- 05:37 PM Bug #14526 (Resolved): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 03:11 PM Bug #14526 (In Progress): Design and Process VDA - Functional and Failure Analysis - After Resizing(Minimising) Horizontal bar and Clicking Percentage allocation repeatedly, alignment of the page is changing.
- 05:37 PM Bug #14537 (Resolved): Process VDA - Functional/Failure Analysis - Context menu labels are not proper for Characteristics and Failure Block.
- 05:36 PM Bug #14538 (Resolved): Process VDA - Functional Analysis - Edit Characteristics is not working. After clicking OK button in Edit Characteristics popup window, operation is removed. On refresh it is displayed again
- 05:36 PM Bug #14540 (Resolved): Process VDA - Functional Analysis - Delete Characteristics option is displaying Edit FourM popup window(Refer Description)
- 05:36 PM Bug #14541 (Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 05:35 PM Bug #14544 (Resolved): Process VDA - Failure Analysis - While clicking OK button directly without doing any changes, popup window is not closing
- 05:35 PM Bug #14553 (Resolved): Design and Process VDA - Percentage allocation displays 7th Step
- 05:35 PM Bug #14556 (Resolved): Process VDA: When the User access the Funtion/Failure Analysis through AQuAPro Module it's not loading the Page
- 05:35 PM Bug #14566 (Resolved): Process VDA - Functional/Failure Analysis - Edit Work Element Function, Process Item Function and FourM are reflected only on refresh in Diagrammatic view
- 05:34 PM Bug #14569 (Resolved): Process VDA - Functional/Failure Analysis - Context menu is not closing even after popup is opening
- 05:34 PM Bug #14591 (Resolved): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 05:34 PM Bug #14618 (Resolved): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 12:23 PM Bug #14618 (In Progress): Design VDA: Function/Failure Analysis, Delete option is not working as expected
- 05:29 PM Bug #14421 (Resolved): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 02:28 PM Bug #14421 (In Progress): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 02:03 PM Bug #14421 (Not Resolved): Design VDA - After Editing the Element from the Context menu, all the Production item names are changes as the Edited Production Item name.
- 05:29 PM Bug #14552 (Resolved): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 02:48 PM Bug #14552 (In Progress): Process VDA - Structure Analysis - After collapsing the element and again clicking on the Expand arrow, arrow is disappearing
- 05:28 PM Bug #14578 (Resolved): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 04:46 PM Bug #14578 (In Progress): Process VDA - Failure Analysis - Severity Rating is duplicating for each time OK button is clicked without doing any changes in Edit Effect popup.(Refer Description)
- 05:27 PM Bug #14609 (Resolved): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 02:47 PM Bug #14609 (In Progress): Process VDA - Structure Analysis - Context Menu for Design VDA is displayed in Process VDA
- 05:26 PM Bug #14612 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 11:08 AM Bug #14612 (In Progress): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, Component elements are displayed again under same Component Element
- 05:26 PM Bug #14620 (Resolved): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Tool Tip for the Legend Icon
- 05:16 PM Bug #14621 (Resolved): Design VDA: Function/Failure Analysis, In Diagrammatic View there is no Scroll Bar for the displayed Legend Window
- 05:14 PM Bug #14559 (Resolved): Process VDA - Structure Analysis - Filter for Operation Category and FourM Category displays Select an Option. But the data in the dropdown displays Select
- 05:07 PM Bug #14298: Process VDA - There is no option to add Severity for the added Effect.
- Dev Team has provided Assign Severity Rating in Cycle 3. So Severity for Effect can be added for RISK.
But there ... - 05:04 PM Bug #14643 (Open): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- 04:51 PM Bug #14643 (Closed): Click on Auditee : Corrective Actions, projects widget is opening/ closing in Social Media
- Click on Auditee : Corrective Actions projects widget is opening/ closing
- 04:38 PM Bug #14630 (Fixed with Hotfix): Report : Findings report->Bench mark field does not display frequently modified data
- 04:37 PM Bug #14630 (Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- 03:25 PM Bug #14630 (Not Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- Issue replicated to Joshua
- 01:23 PM Bug #14630 (Resolved): Report : Findings report->Bench mark field does not display frequently modified data
- Need to run the job to get latest data
- 01:16 PM Bug #14630 (Open): Report : Findings report->Bench mark field does not display frequently modified data
- 01:14 PM Bug #14630 (Closed): Report : Findings report->Bench mark field does not display frequently modified data
- Findings report->Bench mark field does not display frequently modified data
Change the status along with comments... - 04:02 PM Bug #14640 (Open): While clicking on the supplier link from social media page the part details are showing error page.
- 03:49 PM Bug #14640 (Closed): While clicking on the supplier link from social media page the part details are showing error page.
- While clicking on the supplier link from social media page the part details are showing error page.
- 04:02 PM Bug #14634 (Open): In APQP Mail - Site URL and Document URL not displayed fully.
- 02:12 PM Bug #14634 (Closed): In APQP Mail - Site URL and Document URL not displayed fully.
- In APQP Mail - Site URL and Document URL not displayed fully.
- 04:02 PM Bug #14628 (Open): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 01:07 PM Bug #14628 (Closed): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- Context menus for Effect/Failure/Cause must be categorised.
• Assign Severity rating is not displayed for Direct ... - 04:02 PM Bug #14623 (Open): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 10:52 AM Bug #14623 (Closed): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 04:02 PM Bug #14619 (Open): When adding function and requirement in FSR by Add From DFMEA button the Add from DFMEA lable is missing
- 04:02 PM Bug #14617 (Open): Master folder tag allows to save duplicate data
- 04:00 PM Bug #14360 (Fixed with Hotfix): Closed Out -> Effectiveness Status -> The status should not be displayed before verification of effectiveness
- 03:33 PM Bug #14581: Assign route for change request shows the wrong user as document owner and document level is not displayed in assign route screen
- As discussed with sabu,Please make the following changes in assign route screen
1.Show the document owner as Bhuva... - 03:30 PM Bug #14517 (Closed): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Working fine
- 03:26 PM Bug #14562 (Fixed with Hotfix): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 02:15 PM Bug #14562 (Resolved): LPA : Changing the effectiveness frequently and closed the concern form displays error on the form
- 03:13 PM Bug #14626 (Fixed with Hotfix): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:19 PM Bug #14626 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Duplicate issue #14267
- 01:14 PM Bug #14626 (Open): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:03 PM Bug #14626 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 03:08 PM Bug #14252 (Closed): Process Activities ->Unassigned site name is displayed for a process
- 02:30 PM Bug #14629 (TBD): To be Discussed- For Every BOM Import during a program creation (before saving), all the imported details are showing up in the Supplier part details, But our program shows only the latest uploaded details.
- 01:11 PM Bug #14629 (TBD): To be Discussed- For Every BOM Import during a program creation (before saving), all the imported details are showing up in the Supplier part details, But our program shows only the latest uploaded details.
- For Every BOM Import during a program creation (before saving), all the imported details are showing up in the Suppli...
- 02:18 PM Bug #14584 (Fixed with Hotfix): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 02:17 PM Bug #14584 (Resolved): Need Loading symbol after attaching the document in ECR form - Chrome Browser issue
- 02:15 PM Bug #14400 (Resolved): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 02:10 PM Bug #14625 (Open): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 12:50 PM Bug #14625 (Closed): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bul...
- 02:05 PM Bug #14523 (Fixed with Hotfix): Action Management: Action name is displaying twice.
- 10:59 AM Bug #14523 (Resolved): Action Management: Action name is displaying twice.
- 02:05 PM Bug #14564 (Fixed with Hotfix): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 10:59 AM Bug #14564 (Resolved): Change Management : When selecting 9 documents for change request then clicking on OK green button in the tree level window - No Response.
- 01:19 PM Bug #14359 (Fixed with Hotfix): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 12:58 PM Bug #14359 (Resolved): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- 12:17 PM Bug #14359 (Not Fixed with Hotfix): Closed Out -> Effectiveness Due Date field is not supporting multidate format
- YYYY/MM/DD format is not supporting
- 01:19 PM Bug #14627 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:18 PM Bug #14627 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:12 PM Bug #14627 (Open): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:11 PM Bug #14627 (Resolved): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:11 PM Bug #14627 (Open): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- WAD. NC filled as code
- 01:05 PM Bug #14627 (Closed): Reports : Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- Findings report "Non Conformity / Opportunity for improvements" field displays Code i n the respective field
- 01:13 PM Bug #14432 (Fixed with Hotfix): Findings Report ->Benchmark data is not displayed in Findings Reports.
- 12:57 PM Bug #14363 (Fixed with Hotfix): Email context for Findings Effectiveness -> There is no option to select route for Findings Effectiveness in business rule settings and Escalation route
- Displays reminder in Notification setup and route in assign routes
- 12:38 PM Bug #14404 (Fixed with Hotfix): Social Media : For users having supplier portal rights on clicking on activities Inspection Module is listed
- 12:24 PM Bug #14353 (Fixed with Hotfix): Email for Effectiveness For Findings -> Email subject is wrong.
- 12:21 PM Bug #14368 (Resolved): For the concerns created from IC, without making any changes in concern form asks " New Concern form for category and sub category has been changed. Do you want new form changes?"
- 12:20 PM Bug #14308 (Fixed with Hotfix): Corrective Actions -> Car approach -> Submit button is visible to the auditee even after submitting the Verification as Yes only.
- Verified as Hot fix
- 11:46 AM Bug #14294 (Fixed with Hotfix): While approving the respective action in approver login displays dual window after approver
- 11:00 AM Bug #14294 (Resolved): While approving the respective action in approver login displays dual window after approver
- 11:42 AM Bug #14573 (Resolved): The concern is created along with supplier and part number, but logging in as supplier user not shows the created concern.
- 11:42 AM Bug #14574 (Resolved): In social media layout for supplier users, shows concerns that are not related to the currently logged in supplier user.
- 11:36 AM Bug #14608 (Closed): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- 11:35 AM Bug #14608 (Resolved): Process VDA - Structure Analysis - After collapsing an Item and then clicking on the expand Arrow, Arrow is disappearing.
- duplication issues
- 10:32 AM Bug #14536 (Fixed with Hotfix): LPA : Auditor and Auditee availability email is not generating
- Issue verified as Hot fix
Also available in: Atom