Activity
From 03/17/2021 to 04/15/2021
04/15/2021
- 04:12 PM Bug #22027 (Open): Process Owner & Auditee Contact person similar in most of the Process Audits . Why is it required to select Auditee contact person even though process owner is pre-defined ?
- 02:02 PM Bug #22027 (Open): Process Owner & Auditee Contact person similar in most of the Process Audits . Why is it required to select Auditee contact person even though process owner is pre-defined ?
- Through process is mapped in Annual audit plan while creating actual audit through process is mapped along with Respo...
- 12:47 AM Bug #21886 (Resolved): SP1060-> LPA Repeat NC & LPA -NC Closure (Old): There is no data for 2021. But its showing the data with default Year as "2021"
- 12:47 AM Bug #21886 (Fixed in Dev): SP1060-> LPA Repeat NC & LPA -NC Closure (Old): There is no data for 2021. But its showing the data with default Year as "2021"
04/13/2021
- 06:28 PM Bug #21888 (Closed): SP1060-> All reports -> If shift name is same across sites, then we need to show the difference (By showing shift name + site name like department filter)
- 06:28 PM Bug #21888 (Resolved): SP1060-> All reports -> If shift name is same across sites, then we need to show the difference (By showing shift name + site name like department filter)
- 06:28 PM Bug #21887 (Closed): SP1060->All reports -> Filter -> Responsible person name should be same as chart
- 06:27 PM Bug #21887 (Resolved): SP1060->All reports -> Filter -> Responsible person name should be same as chart
- 06:27 PM Bug #21889 (Closed): SP1060-> All reports -> Duplicate NC/OFI Count is displayed. Identified 5 nc's for 2031 but its showing 25 records
- 06:26 PM Bug #21889 (Resolved): SP1060-> All reports -> Duplicate NC/OFI Count is displayed. Identified 5 nc's for 2031 but its showing 25 records
- 06:27 PM Bug #21892 (Closed): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 06:26 PM Bug #21892 (Resolved): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 06:27 PM Bug #21893 (Closed): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- 06:26 PM Bug #21893 (Resolved): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- 06:21 PM Bug #21440 (Closed): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 06:21 PM Bug #21440 (Resolved): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 06:21 PM Bug #21440 (Fixed in Dev): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 06:21 PM Bug #21455 (Closed): All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be displayed in tabular data similar with layer wise chart
- Closed in SP1061_CY1
- 06:20 PM Bug #21455 (Resolved): All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be displayed in tabular data similar with layer wise chart
- 06:20 PM Bug #21455 (Fixed in Dev): All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be displayed in tabular data similar with layer wise chart
- 06:18 PM Bug #21656 (Closed): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- Closed in CY1-SP1061
- 06:18 PM Bug #21656 (Resolved): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- 06:18 PM Bug #21656 (Fixed in Dev): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- 02:01 PM Bug #22026 (Open): Requirement->New status column on audit report and finding Report-Newly added fields are not displaying
- 01:35 PM Bug #22026 (Fixed with Hotfix): Requirement->New status column on audit report and finding Report-Newly added fields are not displaying
- Requirement->New status column on audit report and finding Report-Newly added fields are not displaying
Ref Excel
04/09/2021
- 03:04 PM Bug #22022 (Open): Corrective action status page is not loading for admin, auditor & auditee
- 12:14 PM Bug #22022 (Fixed with Hotfix): Corrective action status page is not loading for admin, auditor & auditee
- Auditee->Page is not loading in corrective action status
- 12:04 PM Bug #22004 (Fixed with Hotfix): Audit Findings Report -> Shift is not showing the data in tabular report
- 12:03 PM Bug #22004 (Fixed in Dev): Audit Findings Report -> Shift is not showing the data in tabular report
- 12:03 PM Bug #22021 (Fixed with Hotfix): Skoda -> Audit Job is showing error while executing after applying bug fix patches
- 12:03 PM Bug #22021 (Fixed in Dev): Skoda -> Audit Job is showing error while executing after applying bug fix patches
- 12:03 PM Bug #22021 (Open): Skoda -> Audit Job is showing error while executing after applying bug fix patches
- 12:03 PM Bug #22021 (Fixed with Hotfix): Skoda -> Audit Job is showing error while executing after applying bug fix patches
- Skoda -> Audit Job is showing error while executing after applying bug fix patches
- 11:40 AM Bug #22017 (Fixed in Dev): Plan Audit ->Data is hide while clicking on Audit criteria
- 11:19 AM Bug #22017 (Open): Plan Audit ->Data is hide while clicking on Audit criteria
- 07:41 AM Bug #22017 (Fixed with Hotfix): Plan Audit ->Data is hide while clicking on Audit criteria
- Plan Audit ->Data is hide while clicking on Audit criteria
- 11:40 AM Bug #22020 (Fixed in Dev): Planned audit -> Blank space is displayed while edit the planned audit (grey)
- 11:19 AM Bug #22020 (Open): Planned audit -> Blank space is displayed while edit the planned audit (grey)
- 08:06 AM Bug #22020 (Fixed with Hotfix): Planned audit -> Blank space is displayed while edit the planned audit (grey)
- Planned audit -> Blank space is displayed while edit the planned audit (grey)
- 11:40 AM Usability #22019 (Fixed in Dev): Planned Audit -> Unwanted space is displayed in planned audit
- 11:19 AM Usability #22019 (Open): Planned Audit -> Unwanted space is displayed in planned audit
- 08:03 AM Usability #22019 (Fixed with Hotfix): Planned Audit -> Unwanted space is displayed in planned audit
- Planned Audit -> Unwanted space is displayed in planned audit
- 11:40 AM Bug #22018 (Fixed in Dev): Planned audit -> Shift alignment is not proper in planned audit ( Textbox size)
- 11:19 AM Bug #22018 (Open): Planned audit -> Shift alignment is not proper in planned audit ( Textbox size)
- 08:01 AM Bug #22018 (Fixed with Hotfix): Planned audit -> Shift alignment is not proper in planned audit ( Textbox size)
- Planned audit -> Shift alignment is not proper in planned audit
04/08/2021
04/07/2021
- 04:49 PM Bug #22016 (Open): There is no option to modify or disable the email context in customize email messages for newly included functionality
- 03:37 PM Bug #22016 (Not Fixed with Hotfix): There is no option to modify or disable the email context in customize email messages for newly included functionality
- 1. a. Request availability notification to Additional Contact Person(s) - Included with auditee contact person email ...
- 04:15 PM Bug #22003 (Fixed in Dev): Actual audit -> names are displayed as undefined in Responsible person, Auditee contact person.
- 10:25 AM Bug #21971 (Fixed in Dev): Auditee Manager approval Actions -> Date & Requested Response Due Date is not necessary in this action. Instead of that, we can show Auditor Close Out Date & Auditor Close Out (Due Date)
- 10:24 AM Bug #21998 (Fixed in Dev): Edit functionality is not working in Planned and actual audit
- 10:24 AM Bug #21999 (Fixed in Dev): Business Rule-> Save is not working on Audit status in business rule(Do we need Audit report status)
- 10:24 AM Bug #22001 (Fixed in Dev): IATF form-> Shift details need to displayed in IATF form also
- as per the discussion no need in IATF form
04/05/2021
- 07:17 PM Bug #22013 (Open): Audit Repeat NC Report -> Clause Vs Repeated NC Count -> The count has to be displayed based on "Non confirmity + Same clause and standard" combination
- 07:16 PM Bug #22013 (Closed): Audit Repeat NC Report -> Clause Vs Repeated NC Count -> The count has to be displayed based on "Non confirmity + Same clause and standard" combination
- Audit Repeat NC Report -> Clause Vs Repeated NC Count -> The count has to be displayed based on "Non conformity + Sam...
- 07:02 PM Bug #22012 (Open): Audit Repeat NC Report ->Clause Vs Repeat Count -> Clause field has to be displayed with Standard name and number
- 07:02 PM Bug #22012 (Fixed with Hotfix): Audit Repeat NC Report ->Clause Vs Repeat Count -> Clause field has to be displayed with Standard name and number
- Audit Repeat NC Report ->Clause Vs Repeat Count -> Clause field has to be displayed with Standard name and number.
- 06:59 PM Bug #22011 (Open): Audit Repeat NC Report -> All Tabular data is showing only one row even though multiple data's from row 2
- 06:54 PM Bug #22011 (Closed): Audit Repeat NC Report -> All Tabular data is showing only one row even though multiple data's from row 2
- Audit Repeat NC Report -> All Tabular data is showing only one row even though multiple data's from row 2
- 06:43 PM Bug #22010 (Open): Audit Repeat NC Report -> Repeated NC Count is wrong for Clause Wise chart & Department wise chart
- 06:43 PM Bug #22010 (Fixed with Hotfix): Audit Repeat NC Report -> Repeated NC Count is wrong for Clause Wise chart & Department wise chart
- Audit Repeat NC Report -> Repeated NC Count is wrong for Clause Wise chart & Department wise chart
A repeat Non c... - 06:43 PM Bug #22009 (Open): Audit Repeat NC Report -> Need to show the data for department and clause wise after clicking on default chart / Individual chart should have title
- 06:34 PM Bug #22009 (Fixed with Hotfix): Audit Repeat NC Report -> Need to show the data for department and clause wise after clicking on default chart / Individual chart should have title
- Audit Repeat NC Report -> Need to show the data for department and clause wise after clicking on default chart / Indi...
- 06:43 PM Bug #22008 (Open): Audit Repeat NC Report -> Tabular Report -> NCCategory should be renamed as "Findings Category
- 06:30 PM Bug #22008 (Closed): Audit Repeat NC Report -> Tabular Report -> NCCategory should be renamed as "Findings Category
- Audit Repeat NC Report -> Tabular Report -> NCCategory should be renamed as "Findings Category
- 06:18 PM Bug #22007 (Fixed with Hotfix): Audit status -> Audit status details is not displayed proper in perform page( newly added fields ) both audit pro and lpa
- Audit status -> Audit status details is not proper in perform page( newly added fields )
- 06:15 PM Bug #22006 (Fixed with Hotfix): Audit status-> Dropdown icon is not proper in audit status field.
- Audit status-> Dropdown icon is not proper in audit status field.
- 06:12 PM Bug #22005 (Fixed with Hotfix): Actual audit ->Change the text "auditee contact person" as Additional contact person in alert message
- Actual audit ->Change the text "auditee contact person" as Additional contact person in alert message
- 06:00 PM Bug #22004 (Open): Audit Findings Report -> Shift is not showing the data in tabular report
- 06:00 PM Bug #22004 (Fixed with Hotfix): Audit Findings Report -> Shift is not showing the data in tabular report
- Audit Findings Report -> Shift is not showing the data in tabular report
- 06:00 PM Bug #22003 (Open): Actual audit -> names are displayed as undefined in Responsible person, Auditee contact person.
- 06:00 PM Bug #22003 (Closed): Actual audit -> names are displayed as undefined in Responsible person, Auditee contact person.
- Actual audit -> names are displayed as undefined in Responsible person, Auditee contact person.
- 05:59 PM Bug #22001 (Open): IATF form-> Shift details need to displayed in IATF form also
- 05:56 PM Bug #22001 (Fixed with Hotfix): IATF form-> Shift details need to displayed in IATF form also
- IATF form-> Shift details need to displayed in IATF form also
- 05:54 PM Bug #21999 (Open): Business Rule-> Save is not working on Audit status in business rule(Do we need Audit report status)
- 05:46 PM Bug #21999 (Fixed with Hotfix): Business Rule-> Save is not working on Audit status in business rule(Do we need Audit report status)
- Business Rule-> Save is not working on Audit status in business rule(Do we need Audit report status)
- 05:54 PM Bug #21998 (Open): Edit functionality is not working in Planned and actual audit
- 05:33 PM Bug #21998 (Fixed with Hotfix): Edit functionality is not working in Planned and actual audit
- Edit functionality is not working in Planned and actual audit
- 05:20 PM Bug #21997 (Open): New CAR Form should be part of CAR approach selection in Upload NC / OFI & Corrective action's list
- 05:20 PM Bug #21997 (Fixed with Hotfix): New CAR Form should be part of CAR approach selection in Upload NC / OFI & Corrective action's list
- New CAR Form should be part of CAR approach selection in Upload NC / OFI & Corrective action's list
- 05:20 PM Bug #21996 (Open): New CAR Form -> The border has to provide for entire form like other forms (8D,CAR,7D Etc)
- 05:17 PM Bug #21996 (Fixed with Hotfix): New CAR Form -> The border has to provide for entire form like other forms (8D,CAR,7D Etc)
- New CAR Form -> The border has to provide for entire form like other forms (8D,CAR,7D Etc)
- 05:20 PM Bug #21995 (Open): New CAR Form -> Label changes on form
- 05:16 PM Bug #21995 (Fixed with Hotfix): New CAR Form -> Label changes on form
- New CAR Form -> Label changes on form
1. Audit No has to renamed as "Audit Number"
2. NC No has to renamed as ... - 05:20 PM Bug #21994 (Open): New CAR Form -> The New CAR Form label should be "CAR_V2" & its should be there in Upload NC - CAR approach selection and corrective actions - approach selection
- 05:05 PM Bug #21994 (Fixed with Hotfix): New CAR Form -> The New CAR Form label should be "CAR_V2" & its should be there in Upload NC - CAR approach selection and corrective actions - approach selection
- New CAR Form -> The New CAR Form label should be "CAR_V2" & its should be there in Upload NC - CAR approach selection...
- 05:20 PM Bug #21992 (Open): New CAR Form -> Error message displayed while trying to add row by using "CTRL+INSERT"
- 04:52 PM Bug #21992 (Fixed with Hotfix): New CAR Form -> Error message displayed while trying to add row by using "CTRL+INSERT"
- New CAR Form -> Error message displayed as "EwQIMS : Expression must evaluate to a node-set" while trying to add row ...
- 05:20 PM Bug #21991 (Open): New CAR Form -> Error message displayed while trying to add row on all available fields
- 04:49 PM Bug #21991 (Fixed with Hotfix): New CAR Form -> Error message displayed while trying to add row on all available fields
- Error message displayed as "EwQIMS : Object reference not set to an instance of an object." while trying to add row o...
- 05:20 PM Bug #21990 (Open): New CAR Form ->Spell mistake on some of the labels
- 04:46 PM Bug #21990 (Fixed with Hotfix): New CAR Form ->Spell mistake on some of the labels
- New CAR Form ->Spell mistake on some of the labels
1. Requirment Statement of ISO Standard or Group/SAVW standrad ... - 05:20 PM Bug #21989 (Open): New CAR Form -> Data's are not displaying for some fields
- 04:40 PM Bug #21989 (Fixed in Dev): New CAR Form -> Data's are not displaying for some fields
- New CAR Form -> Data's are not displaying for some fields
1. Auditor - All Associate and lead auditor name has to ... - 05:20 PM Bug #21988 (Open): New CAR Form ->Audit Details Tab -> All fields should not accept manual entry. These fields should be ready only.
- 04:34 PM Bug #21988 (Fixed in Dev): New CAR Form ->Audit Details Tab -> All fields should not accept manual entry. These fields should be ready only.
- New CAR Form ->Audit Details Tab -> All fields should not accept manual entry. These fields should be ready only.
... - 05:20 PM Bug #21971 (Open): Auditee Manager approval Actions -> Date & Requested Response Due Date is not necessary in this action. Instead of that, we can show Auditor Close Out Date & Auditor Close Out (Due Date)
- 12:33 PM Bug #21930 (Fixed in Dev): Alert message need to displayed on the upon checking the audit criteria which should be displayed on audit plan.
03/31/2021
- 04:03 PM Bug #21942 (Fixed in Dev): Based on business rule auditee manger is displayed for mandatory and not manadatory
- 04:03 PM Bug #21941 (Fixed in Dev): Save button is not displayed after rejected by auditee manager
- 02:34 PM Bug #21971 (Fixed with Hotfix): Auditee Manager approval Actions -> Date & Requested Response Due Date is not necessary in this action. Instead of that, we can show Auditor Close Out Date & Auditor Close Out (Due Date)
- Auditee Manager approval Actions -> Date & Requested Response Due Date is not necessary in this action. Instead of th...
03/30/2021
- 04:54 PM Bug #21896 (Fixed in Dev): Show all button is displayed for twice in corrective action page.
- 04:49 PM Bug #21940 (Fixed in Dev): Mail are interrupt for Auditee manager
- 04:49 PM Bug #21933 (Fixed in Dev): Close button is missing in actual audit page.
- 04:49 PM Bug #21932 (Fixed in Dev): Audit Criteria -> Checkbox is missing in Map entity tab
- 04:49 PM Bug #21931 (Fixed in Dev): Text box missing in clauses and MR approver in audit criteria
- 04:49 PM Bug #21928 (Fixed in Dev): Server error is displayed while clicking on audit status
- 04:49 PM Bug #21917 (Fixed in Dev): Assign audit type-> Done button is not working in edit mode
- 04:49 PM Bug #21910 (Fixed in Dev): Auto refresh is not working in action page
- 04:49 PM Bug #21909 (Fixed in Dev): Auditee manager request should not displayed based on NC Response Date Extension / Action Owner Change Request Approval
03/29/2021
- 06:13 PM Bug #21788 (TBD): GRR(Attribute)->Unable to save the gage details when we give Appraiser as 3 and Number of part as 2.
- Need to discuss with prasanna
- 06:12 PM Bug #21788 (Open): GRR(Attribute)->Unable to save the gage details when we give Appraiser as 3 and Number of part as 2.
- 05:09 PM Bug #21788 (Fixed in Dev): GRR(Attribute)->Unable to save the gage details when we give Appraiser as 3 and Number of part as 2.
- 06:10 PM Bug #21506 (Closed): Requirement R7--> GRR Study --> If part variation is Yes--> The data entry field is not showing in the right side of the screen. Refer screenshot(Verified in cascade db)
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:52 PM Bug #21506 (Resolved): Requirement R7--> GRR Study --> If part variation is Yes--> The data entry field is not showing in the right side of the screen. Refer screenshot(Verified in cascade db)
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:26 PM Bug #21506 (Fixed with Hotfix): Requirement R7--> GRR Study --> If part variation is Yes--> The data entry field is not showing in the right side of the screen. Refer screenshot(Verified in cascade db)
- 10:56 AM Bug #21506 (Fixed in Dev): Requirement R7--> GRR Study --> If part variation is Yes--> The data entry field is not showing in the right side of the screen. Refer screenshot(Verified in cascade db)
- 06:10 PM Bug #21526 (Closed): Requirement 7->Need to restrict to adding extra column and more gage number in single sheet
- 06:10 PM Bug #21526 (Resolved): Requirement 7->Need to restrict to adding extra column and more gage number in single sheet
- 06:01 PM Bug #21526 (Fixed with Hotfix): Requirement 7->Need to restrict to adding extra column and more gage number in single sheet
- 06:01 PM Bug #21526 (Fixed in Dev): Requirement 7->Need to restrict to adding extra column and more gage number in single sheet
- 06:09 PM Suggestion #21840 (Closed): R9->External Lab->Need to increase Scope field length(Allow to accept more than 250 characters)
- Verified as consolidated patch in 50 site inst4 cascade db
- 06:00 PM Suggestion #21840 (Resolved): R9->External Lab->Need to increase Scope field length(Allow to accept more than 250 characters)
- 06:09 PM Suggestion #21846 (Closed): R9->Internal Lab Inspection->Need Type search filter in Grid screen
- Verified as consolidated patches in 50 site inst4 cascade db
- 05:59 PM Suggestion #21846 (Resolved): R9->Internal Lab Inspection->Need Type search filter in Grid screen
- 06:08 PM Usability #21861 (Closed): R9->Performance issue-> Attach from doc pro tab takes more time to load the page
- 06:08 PM Usability #21861 (Resolved): R9->Performance issue-> Attach from doc pro tab takes more time to load the page
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:58 PM Usability #21861 (Fixed with Hotfix): R9->Performance issue-> Attach from doc pro tab takes more time to load the page
- 05:58 PM Usability #21861 (Fixed in Dev): R9->Performance issue-> Attach from doc pro tab takes more time to load the page
- 06:07 PM Usability #21863 (Closed): Need image for Internal lab inspection menu
- Verified as conoslidated patches in 50 site inst4 cascade db
- 06:07 PM Usability #21863 (Resolved): Need image for Internal lab inspection menu
- 05:58 PM Usability #21863 (Fixed with Hotfix): Need image for Internal lab inspection menu
- 05:57 PM Usability #21863 (Fixed in Dev): Need image for Internal lab inspection menu
- 06:07 PM Bug #21923 (Closed): R9 and R10 --> Reset is not working on internal lab inspection functionality
- 06:06 PM Bug #21923 (Resolved): R9 and R10 --> Reset is not working on internal lab inspection functionality
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:57 PM Bug #21923 (Fixed with Hotfix): R9 and R10 --> Reset is not working on internal lab inspection functionality
- 05:57 PM Bug #21923 (Fixed in Dev): R9 and R10 --> Reset is not working on internal lab inspection functionality
- 05:45 PM Bug #21923 (Open): R9 and R10 --> Reset is not working on internal lab inspection functionality
- 06:05 PM Bug #21944 (Closed): R9->When tries to delete the gage then " Dependency Exist "alert is not displaying (if that selected gage is in "Under study/Pending closeout" status)
- 06:04 PM Bug #21944 (Resolved): R9->When tries to delete the gage then " Dependency Exist "alert is not displaying (if that selected gage is in "Under study/Pending closeout" status)
- Verified as consolidated patch in 50 stie inst4 cascade db
- 05:56 PM Bug #21944 (Fixed with Hotfix): R9->When tries to delete the gage then " Dependency Exist "alert is not displaying (if that selected gage is in "Under study/Pending closeout" status)
- 05:55 PM Bug #21944 (Fixed in Dev): R9->When tries to delete the gage then " Dependency Exist "alert is not displaying (if that selected gage is in "Under study/Pending closeout" status)
- 05:45 PM Bug #21944 (Open): R9->When tries to delete the gage then " Dependency Exist "alert is not displaying (if that selected gage is in "Under study/Pending closeout" status)
- 06:05 PM Bug #21943 (Closed): R9->Gage number:08138076 (CEE-380) ,110880 (inactive) and 120079 (inactive)-> When tries to select these gage number and click on new button it shown server error.
- 06:04 PM Bug #21943 (Resolved): R9->Gage number:08138076 (CEE-380) ,110880 (inactive) and 120079 (inactive)-> When tries to select these gage number and click on new button it shown server error.
- Verified as consolidated patch in 50 site inst4 cascasde db
- 05:56 PM Bug #21943 (Fixed with Hotfix): R9->Gage number:08138076 (CEE-380) ,110880 (inactive) and 120079 (inactive)-> When tries to select these gage number and click on new button it shown server error.
- 05:56 PM Bug #21943 (Fixed in Dev): R9->Gage number:08138076 (CEE-380) ,110880 (inactive) and 120079 (inactive)-> When tries to select these gage number and click on new button it shown server error.
- 05:45 PM Bug #21943 (Open): R9->Gage number:08138076 (CEE-380) ,110880 (inactive) and 120079 (inactive)-> When tries to select these gage number and click on new button it shown server error.
- 05:52 PM Bug #21323 (Closed): R2 Requirement --> The data should display in following order, 1. Site 2. Gage Number 3. Gage Type 4. Usage Location 5. GRR Date 6. GRR Result 7. Key Factor 8. Assurance Factor
- 05:52 PM Bug #21323 (Resolved): R2 Requirement --> The data should display in following order, 1. Site 2. Gage Number 3. Gage Type 4. Usage Location 5. GRR Date 6. GRR Result 7. Key Factor 8. Assurance Factor
- 05:26 PM Bug #21323 (Fixed with Hotfix): R2 Requirement --> The data should display in following order, 1. Site 2. Gage Number 3. Gage Type 4. Usage Location 5. GRR Date 6. GRR Result 7. Key Factor 8. Assurance Factor
- 05:52 PM Usability #21582 (Closed): Requirement 7->If try to import the data when study is in "Pending closeout status" then the data in study screen automatically show the calculated value as well as save the imported data details without clicking on calculate and save button.
- 05:51 PM Usability #21582 (Resolved): Requirement 7->If try to import the data when study is in "Pending closeout status" then the data in study screen automatically show the calculated value as well as save the imported data details without clicking on calculate and save button.
- As per dev comment, we closing this issue
- 05:27 PM Usability #21582 (Fixed with Hotfix): Requirement 7->If try to import the data when study is in "Pending closeout status" then the data in study screen automatically show the calculated value as well as save the imported data details without clicking on calculate and save button.
- 04:56 PM Usability #21582 (Fixed in Dev): Requirement 7->If try to import the data when study is in "Pending closeout status" then the data in study screen automatically show the calculated value as well as save the imported data details without clicking on calculate and save button.
- 05:51 PM Bug #21641 (Closed): Email--> Email generating for the Inactive gage also
- 05:51 PM Bug #21641 (Resolved): Email--> Email generating for the Inactive gage also
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:25 PM Bug #21641 (Fixed with Hotfix): Email--> Email generating for the Inactive gage also
- 05:50 PM Bug #21654 (Closed): R8-->Email--> The due date is showing wrong for the gage which is having multiple group
- 05:50 PM Bug #21654 (Resolved): R8-->Email--> The due date is showing wrong for the gage which is having multiple group
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:25 PM Bug #21654 (Fixed with Hotfix): R8-->Email--> The due date is showing wrong for the gage which is having multiple group
- 05:46 PM Bug #21708 (Open): New doc request:Doc review option should show based on doc pro settings. By default freq dropdown should be in non selective mode
- 05:46 PM Bug #21707 (Open): Doc Template: Settings icon is not aligned. And it is displaying once the element is deselected and selected from available elements
- 05:46 PM Bug #21697 (Open): Category master: Retention period is saved with 2 from texts when others is selected from the max/min retention period entry popup
- 05:46 PM Usability #21818 (Open): Change req: Better to keep loading symbol when the document type is changed. User doesn't know the change until unless they scroll
- 05:46 PM Bug #21817 (Open): PDF view: when cover page is set as last page, it should show the page after the original doc ends, but it shows in the last page of the original document and one blank page is displayed
- 05:46 PM Bug #21816 (Open): Doc Pro settings: Cant able to delete the duplicate category data(Data specific, some patch pbm)
- 05:46 PM Bug #21815 (Open): New doc req: Additional info link: Category and classification: Cant able to search and select the values
- 05:46 PM Bug #21811 (Open): Classification ,Category and doc type master: Delete message dependency label is not converted
- 05:46 PM Bug #21810 (Open): Doc Settings: Doc type popup: Search text box font size is too small
- 05:46 PM Bug #21806 (Open): ToC: Doc view with template: created date should show the doc publish date and the category name shouldn't display inside the bracket
- 05:46 PM Bug #21805 (Open): Doc Template : Added Elements design issue PFB the description
- 05:46 PM Bug #21803 (Open): Change req: Effective date picker shows the date picker by default and the design is not good
- 05:46 PM Bug #21792 (Open): New document request: Need border for Status in the table after attaching doc. On clicking on the additional info header, the popup goes down
- 05:46 PM Bug #21762 (Open): Document Mgmt: Edit doc details are not working ,Order of fields are changed too.
- 05:46 PM Bug #21759 (Open): New Document Request: Review date is not working based on document, its working based on the Folder settings
- 05:46 PM Bug #21754 (Open): PDF templates: The data entered in page details and cover page are reflecting only after refreshing the grid(Sporadic)
- 05:46 PM Bug #21743 (Open): 10.6.0 ->Alert message is not working based on the business rule "is all Auditor/Auditee Confirmation Mandatory?" is yes or no
- 05:46 PM Bug #21738 (Open): New document req: By default the documents review frequency should show the frequency which is set at the folder level
- 05:46 PM Usability #21733 (Open): New doc req: if the user by mistakes clicked the additional info icon without selecting the doc type, then there is no way to go back since the close button will not be closed w/o entering mandatory fields
- 05:46 PM Usability #21727 (Open): Doc Pro settings: Set fields for Doc Type: Usability issues
- 05:46 PM Unit Level and Cosmetic Issues #21722 (Open): Classification New menu issues: PFB the desc
- 05:46 PM Bug #21721 (Open): Addition info detaisl : The Additional info details in Doc TOC varies from the details added during new doc request
- 05:46 PM Bug #21720 (Open): Document Template menu and Classification master menu should display based on doc pro settings
- 05:46 PM Bug #21716 (Open): Actual audit -> update -> While updating responsible person in actual audit its displayed only one user.
- 05:46 PM Bug #21714 (Open): New Doc Request - Alert for entering the Documents Reviewed after should say ' Enter the Doc reviewed after frequency' its now showing Please enter the unit. Also Mandatory indication is missing.
- 05:46 PM Bug #21710 (Open): Doc TOC- Document view shows error
- 05:46 PM Bug #21709 (Open): Doc TOC - Additional info shows no record even the doc has data in the beginning
- 05:45 PM Bug #21942 (Open): Based on business rule auditee manger is displayed for mandatory and not manadatory
- 05:45 PM Bug #21941 (Open): Save button is not displayed after rejected by auditee manager
- 05:45 PM Bug #21940 (Open): Mail are interrupt for Auditee manager
- 05:45 PM Bug #21939 (Open): Primary contact person should not displayed in additional contact person, it has been selected in auditee contact person
- 05:45 PM Bug #21933 (Open): Close button is missing in actual audit page.
- 05:45 PM Bug #21932 (Open): Audit Criteria -> Checkbox is missing in Map entity tab
- 05:45 PM Bug #21931 (Open): Text box missing in clauses and MR approver in audit criteria
- 05:45 PM Bug #21930 (Open): Alert message need to displayed on the upon checking the audit criteria which should be displayed on audit plan.
- 05:45 PM Bug #21928 (Open): Server error is displayed while clicking on audit status
- 05:45 PM Bug #21917 (Open): Assign audit type-> Done button is not working in edit mode
- 05:45 PM Bug #21910 (Open): Auto refresh is not working in action page
- 05:45 PM Bug #21909 (Open): Auditee manager request should not displayed based on NC Response Date Extension / Action Owner Change Request Approval
- 05:45 PM Bug #21897 (Open): CSD menu is missing in Suite page.
- 05:45 PM Bug #21896 (Open): Show all button is displayed for twice in corrective action page.
- 05:45 PM Bug #21895 (Open): Based on template mandatory field scope, focus, auditee contact's person should be mandatory
- 05:45 PM Bug #21869 (Open): PDF template: Origin date is not fetched
- 05:45 PM Usability #21868 (Open): New doc req:Additional info popup:when the datas are selecting at the end of the popup, screen automatically scrolls up and shows the 1st field
- 05:45 PM Bug #21864 (Open): Doc Template and Doc Settings: Dependency is not checked when removing the element from document template
- 05:45 PM Unit Level and Cosmetic Issues #21837 (Open): ToC:Change request: Blank space is there, better to rearrange the fields
- 05:45 PM Bug #21836 (Open): New doc req: Additional info mandatory check: Should highlight the column only when the doc type has elements mapped in doc pro settings
- 05:45 PM Usability #21828 (Open): New doc req: After attaching the documents, it takes few seconds to perform any action in the table below reason for request, better to show some loading symbol till its ready to edit
- 05:45 PM Bug #21820 (Open): ToC: Additional information not showing the link to view and change req shows the doc type based on the new doc req selection not based on the last revision
- 05:45 PM Bug #21963 (Open): R9->Getting "Cannot set property value of null " alert in Internal lab inspection Requester details (Occurs only when the attachments are added from Doc Pro)
- 01:59 PM Bug #21963 (Closed): R9->Getting "Cannot set property value of null " alert in Internal lab inspection Requester details (Occurs only when the attachments are added from Doc Pro)
- 05:41 PM Bug #21680 (Closed): R8 Requirement--> Some of the Email get interrupted. So unable to verify the daily basis mail
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:40 PM Bug #21763 (Closed): Multi site --> Email --> From and To mail generating administrator to administrator. Not from logged in person to email user of selected department person
- 05:38 PM Bug #21767 (Closed): Single and Multi site - The email is not generated for newly created department
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:38 PM Bug #21842 (Closed): R9->Internal Lab->Getting server error/compilation error when click on attached document.
- 05:37 PM Bug #21842 (Resolved): R9->Internal Lab->Getting server error/compilation error when click on attached document.
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:24 PM Bug #21842 (Fixed with Hotfix): R9->Internal Lab->Getting server error/compilation error when click on attached document.
- 05:37 PM Bug #21841 (Closed): R9->External Lab->Valid date search is not working.
- 05:37 PM Bug #21841 (Resolved): R9->External Lab->Valid date search is not working.
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:25 PM Bug #21841 (Fixed with Hotfix): R9->External Lab->Valid date search is not working.
- 10:37 AM Bug #21841 (Fixed in Dev): R9->External Lab->Valid date search is not working.
- 05:36 PM Bug #21860 (Closed): R9->Unable to view published attach document under MSA module. Page keeps on loading .Refer screenshot
- 05:35 PM Bug #21860 (Resolved): R9->Unable to view published attach document under MSA module. Page keeps on loading .Refer screenshot
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:26 PM Bug #21860 (Fixed with Hotfix): R9->Unable to view published attach document under MSA module. Page keeps on loading .Refer screenshot
- 05:31 PM Bug #21865 (Closed): R9-->Attachment--> When user tries to view the attached document, it shows the error message
- 05:31 PM Bug #21865 (Resolved): R9-->Attachment--> When user tries to view the attached document, it shows the error message
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:24 PM Bug #21865 (Fixed with Hotfix): R9-->Attachment--> When user tries to view the attached document, it shows the error message
- 05:30 PM Bug #21870 (Closed): R9->Internal lab inspection-> Search functionality is not working->Its showing loading whenever tries to search fields.
- 05:30 PM Bug #21870 (Resolved): R9->Internal lab inspection-> Search functionality is not working->Its showing loading whenever tries to search fields.
- Verified as consolidated patch in 50 site inst4 cascade db
- 05:23 PM Bug #21870 (Fixed with Hotfix): R9->Internal lab inspection-> Search functionality is not working->Its showing loading whenever tries to search fields.
- 10:37 AM Bug #21870 (Fixed in Dev): R9->Internal lab inspection-> Search functionality is not working->Its showing loading whenever tries to search fields.
03/28/2021
- 09:10 AM Bug #21667 (Closed): Header label spelling mistake for the following field "Gage Status, MSA Group name, Due date"
- Verified as consolidated patch in 50 site inst 4 cascade db
- 09:01 AM Bug #21506 (Not Resolved): Requirement R7--> GRR Study --> If part variation is Yes--> The data entry field is not showing in the right side of the screen. Refer screenshot(Verified in cascade db)
- 08:14 AM Bug #21673 (Closed): R7->Response field display " Part2 column is missing" alert if delete the existing part value which is not mandatory for current import gage RR study .->Please refer Screenshot and Excel
- Verified as consolidated patch in 50 site inst4 cascade db
- 07:49 AM Bug #21831 (Closed): R9->Created Internal lab Name is listed in External lab calibration Lab name dropdown. Please Refer screenshot
- Verified as consolidated patch in 50 site inst4 cascade db
- 07:46 AM Bug #21862 (Closed): R9->Reset/deleted parent level name again showing under the parent level.
- Verified as consolidated patch in 50 site inst4 cascade db
- 07:32 AM Bug #21873 (Closed): R9->Internal lab inspection details is not refreshing whenever change the lab name from one lab to another lab .Due to this non incharge person able to complete the study.Please refer screenshot
- Verified as consolidate patch in 50 site inst4 cascade db
- 07:27 AM Bug #21867 (Closed): R9 & R10--> When user tries to enter the Code of different user which is not in the Incharge person list of selected lab information. It should display the alert like "The selected user is not in the Incharge person list of Selected Lab information"
- Verified as consolidated patch in 50 site inst4 cascade db
- 07:26 AM Bug #21866 (Closed): R9 & 10--> Attachment Icon --> Once the study is completed, need to disable the attachment icon. After clicking on save and submit button, the system should allows user to attach the document
- Verified as consolidated patch in 50 site inst4 cascade db
- 07:17 AM Bug #21857 (Closed): R9-> Whenever the entered Requested by/Submitted by code is cleared/deleted, the data of Email Id ,Name and Mobile Number is getting delete from the their respective field .
- Verified as consolidate patch in 50 site inst4 cascade db
- 07:16 AM Bug #21856 (Closed): R9->Once the Internal lab inspection details is saved, then system should not allow to select Lab name .Need to Restrict to select lab name after clicking on save button.
- Verified as consolidated patch in 50 site inst4 cascade db
- 07:16 AM Bug #21855 (Closed): R9->When login as Send to contact person ,then system only display completed Internal lab inspection details list in grid screen & not to display other status. Lab list automatically getting refreshed after clicking on any completed status gage link.
- Verified as consolidated patch in 50 site inst4 cascade db
03/27/2021
- 08:38 PM Bug #21854: Internal lab inspection --> 11130/005(Out for repair)--> New button is not showing in the Internal lab inspection screen when selecting this 11130/005 gage number
- Verified as consolidated patch in 50 site inst4 cascade db
- 08:37 PM Bug #21854 (Closed): Internal lab inspection --> 11130/005(Out for repair)--> New button is not showing in the Internal lab inspection screen when selecting this 11130/005 gage number
- 04:42 PM Bug #21845 (Closed): R9->Internal Lab->Need to change the alert label->When tries to delete the dependency internal lab details, it showing "External lab dependencies" instead of "Internal lab dependencies"->Please refer screenshot
- Verified as consolidated patch in 50 site inst4 cascade db
- 04:40 PM Bug #21843 (Closed): External Lab --> Unable to add "No. 1639 Yanlong Avenue, Pingdi Street, Longgang District, Shenzhen City Postal Code：518117" address in address field. System should accept more than 255 characters in the address field
- Vwerified as consolidate patch in 50 site inst4 cascade db
- 04:28 PM Bug #21841 (Not Resolved): R9->External Lab->Valid date search is not working.
- 04:09 PM Bug #21833: R9->Able to change Internal lab inspection to External lab.Due to this Completed Internal lab inspection screen is not showing lab name details. Need to restrict to change internal lab to external lab.
- Verified as consolidated patch in 50 site inst4 cascade db
- 04:08 PM Bug #21833 (Closed): R9->Able to change Internal lab inspection to External lab.Due to this Completed Internal lab inspection screen is not showing lab name details. Need to restrict to change internal lab to external lab.
- 04:03 PM Bug #21831: R9->Created Internal lab Name is listed in External lab calibration Lab name dropdown. Please Refer screenshot
- Verified as the consolidated patch in 50 site inst4 cascade db
- 04:00 PM Bug #21830 (Closed): Internal lab Inspection->Reset button is not working & Unable to attach file(Attach icon is not clickable).
- Verified as consolidated patch in 50 site inst4 cascade db
- 03:55 PM Bug #21819 (Closed): R9->Unable to select the lab name in Lab name field(Dropdown is not clickable).
- Verified as consolidated patch in 50 site inst 4 cascade db
- 03:51 PM Bug #21765 (Closed): Multi site-->Gage - Unable to save the edited gage details
- Verified as consolidated patch in 50 site inst2 cascade db
- 03:49 PM Bug #21679 (Closed): R7-->GRR Attribute--> the defect type which entered in first column is updating in all the fields
- Verified as consolidated patch in 50 site inst4 cascade db
- 12:45 PM Bug #21602: Requirement 7-> In chart screen Anova table doesn't showing data. Please refer screenshot
- Verified as consolidated patch in 50 site inst4 cascade db
- 12:43 PM Bug #21602 (Closed): Requirement 7-> In chart screen Anova table doesn't showing data. Please refer screenshot
- 12:45 PM Bug #21665 (Closed): R7->Multiparameter-->Out of three parameter ,only two parameter data is updating & one parameter data is not updating in study screen->Please refer imported file
- Verified as consolidate patch in 50 site inst4 cascade db
- 12:27 PM Bug #21511 (Closed): Requirement 7-> Appraiser code does not matching with parts->Please refer description
- Verified as consolidated patch in 50 site inst 4 (cascade db)
- 12:18 PM Bug #21507 (Closed): Requirement R7--> Multi parameter import is not working properly. Kindly refer the excel sheet
03/25/2021
- 01:00 PM Bug #21944 (Closed): R9->When tries to delete the gage then " Dependency Exist "alert is not displaying (if that selected gage is in "Under study/Pending closeout" status)
- 12:54 PM Bug #21943 (Closed): R9->Gage number:08138076 (CEE-380) ,110880 (inactive) and 120079 (inactive)-> When tries to select these gage number and click on new button it shown server error.
- 11:35 AM Bug #21866 (Resolved): R9 & 10--> Attachment Icon --> Once the study is completed, need to disable the attachment icon. After clicking on save and submit button, the system should allows user to attach the document
- 11:35 AM Bug #21866 (Fixed in Dev): R9 & 10--> Attachment Icon --> Once the study is completed, need to disable the attachment icon. After clicking on save and submit button, the system should allows user to attach the document
- 11:35 AM Bug #21830 (Resolved): Internal lab Inspection->Reset button is not working & Unable to attach file(Attach icon is not clickable).
- 11:35 AM Bug #21830 (Fixed in Dev): Internal lab Inspection->Reset button is not working & Unable to attach file(Attach icon is not clickable).
- 10:47 AM Bug #21942 (Fixed with Hotfix): Based on business rule auditee manger is displayed for mandatory and not manadatory
- Audits is not displayed for auditee manger when mandatory and not manadatory
- 10:32 AM Bug #21941 (Fixed with Hotfix): Save button is not displayed after rejected by auditee manager
- Save button is not displayed after rejected by auditee manager
- 10:27 AM Bug #21940 (Fixed with Hotfix): Mail are interrupt for Auditee manager
- Mail are interrupt for Auditee manager
03/24/2021
- 07:15 PM Bug #21939 (Fixed with Hotfix): Primary contact person should not displayed in additional contact person, it has been selected in auditee contact person
- Primary contact person should not displayed in additional contact person, it has been selected in auditee contact per...
- 06:18 PM Bug #21933: Close button is missing in actual audit page.
- in all pages
- 06:12 PM Bug #21933 (Fixed with Hotfix): Close button is missing in actual audit page.
- Close button is missing in actual audit page.
- 05:28 PM Bug #21932 (Fixed with Hotfix): Audit Criteria -> Checkbox is missing in Map entity tab
- Audit Criteria -> Checkbox is missing in Map entity tab
- 05:13 PM Bug #21931 (Fixed with Hotfix): Text box missing in clauses and MR approver in audit criteria
- Text box missing in clauses and MR approver in audit criteria
- 04:25 PM Bug #21930 (Resolved): Alert message need to displayed on the upon checking the audit criteria which should be displayed on audit plan.
- Alert message need to displayed on the upon checking the audit criteria which should be displayed on audit plan.
03/23/2021
- 12:59 PM Bug #21928 (Fixed with Hotfix): Server error is displayed while clicking on audit status
- Server error is displayed while clicking on audit status
03/22/2021
- 05:11 PM Bug #21923 (Closed): R9 and R10 --> Reset is not working on internal lab inspection functionality
- R9 and R10 --> Reset is not working on internal lab inspection functionality
- 04:03 PM Bug #21866 (Not Resolved): R9 & 10--> Attachment Icon --> Once the study is completed, need to disable the attachment icon. After clicking on save and submit button, the system should allows user to attach the document
- Attach icon is not displaying after complete the study. Need attach icon and it should not be clickable after complet...
- 03:57 PM Bug #21870 (Not Resolved): R9->Internal lab inspection-> Search functionality is not working->Its showing loading whenever tries to search fields.
- Date search filter is not working as expected
- 01:46 PM Bug #21830 (Not Resolved): Internal lab Inspection->Reset button is not working & Unable to attach file(Attach icon is not clickable).
- Reset button is not working
- 12:25 PM Bug #21917 (Fixed with Hotfix): Assign audit type-> Done button is not working in edit mode
- Done button is not working in edit mode.
- 11:56 AM Bug #21323 (Fixed in Dev): R2 Requirement --> The data should display in following order, 1. Site 2. Gage Number 3. Gage Type 4. Usage Location 5. GRR Date 6. GRR Result 7. Key Factor 8. Assurance Factor
03/19/2021
- 06:54 PM Bug #21440 (Not Resolved): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 06:53 PM Bug #21656 (Not Resolved): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- 06:31 PM Bug #21417 (Closed): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- 06:30 PM Bug #21652 (Closed): After Fixing Bug # 21404 -> LPA Excuse Performance -> Equipment and Equipment type wise chart is not showing the cancel audit count if layer have multiple equipments
- 06:27 PM Bug #21838 (Closed): Excuse Reports -> Tabular Report -> Audit Status - Cancelled label is missing
- 06:15 PM Bug #21415 (Fixed with Hotfix): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 05:49 PM Bug #21415 (Fixed in Dev): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 05:50 PM Bug #21890 (Fixed with Hotfix): SP1060->Audit - Adherence to Schedule in % -> Duplicate records are displayed for PPT2 site. One audit is scheduled and completed but its showing couple of audits. also % is wrong for this because of duplicate
- Fixed as hotfix in CY6-1060
- 05:48 PM Bug #21890 (Fixed in Dev): SP1060->Audit - Adherence to Schedule in % -> Duplicate records are displayed for PPT2 site. One audit is scheduled and completed but its showing couple of audits. also % is wrong for this because of duplicate
- 05:32 PM Bug #21890 (Not Fixed with Hotfix): SP1060->Audit - Adherence to Schedule in % -> Duplicate records are displayed for PPT2 site. One audit is scheduled and completed but its showing couple of audits. also % is wrong for this because of duplicate
- 05:24 PM Bug #21890 (Yet to Verify): SP1060->Audit - Adherence to Schedule in % -> Duplicate records are displayed for PPT2 site. One audit is scheduled and completed but its showing couple of audits. also % is wrong for this because of duplicate
- 05:24 PM Bug #21890 (Resolved): SP1060->Audit - Adherence to Schedule in % -> Duplicate records are displayed for PPT2 site. One audit is scheduled and completed but its showing couple of audits. also % is wrong for this because of duplicate
- 05:24 PM Bug #21890 (Fixed in Dev): SP1060->Audit - Adherence to Schedule in % -> Duplicate records are displayed for PPT2 site. One audit is scheduled and completed but its showing couple of audits. also % is wrong for this because of duplicate
- 05:24 PM Bug #21890 (Open): SP1060->Audit - Adherence to Schedule in % -> Duplicate records are displayed for PPT2 site. One audit is scheduled and completed but its showing couple of audits. also % is wrong for this because of duplicate
- 05:40 PM Bug #21886 (Not Fixed with Hotfix): SP1060-> LPA Repeat NC & LPA -NC Closure (Old): There is no data for 2021. But its showing the data with default Year as "2021"
- LPA -NC Closure (Old): There is no data for 2021. But its showing the data with default Year as "2021" - Open
- 05:39 PM Bug #21886 (Fixed with Hotfix): SP1060-> LPA Repeat NC & LPA -NC Closure (Old): There is no data for 2021. But its showing the data with default Year as "2021"
- 05:39 PM Bug #21886 (Fixed in Dev): SP1060-> LPA Repeat NC & LPA -NC Closure (Old): There is no data for 2021. But its showing the data with default Year as "2021"
- 05:39 PM Bug #21886 (Open): SP1060-> LPA Repeat NC & LPA -NC Closure (Old): There is no data for 2021. But its showing the data with default Year as "2021"
- 05:38 PM Bug #21887 (Fixed with Hotfix): SP1060->All reports -> Filter -> Responsible person name should be same as chart
- 05:38 PM Bug #21887 (Fixed in Dev): SP1060->All reports -> Filter -> Responsible person name should be same as chart
- 05:38 PM Bug #21887 (Open): SP1060->All reports -> Filter -> Responsible person name should be same as chart
- 05:37 PM Bug #21888 (Fixed with Hotfix): SP1060-> All reports -> If shift name is same across sites, then we need to show the difference (By showing shift name + site name like department filter)
- 05:37 PM Bug #21888 (Fixed in Dev): SP1060-> All reports -> If shift name is same across sites, then we need to show the difference (By showing shift name + site name like department filter)
- 05:36 PM Bug #21888 (Open): SP1060-> All reports -> If shift name is same across sites, then we need to show the difference (By showing shift name + site name like department filter)
- 05:29 PM Bug #21892 (Fixed with Hotfix): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 05:29 PM Bug #21892 (Fixed in Dev): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 05:29 PM Bug #21892 (Reopen): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 05:29 PM Bug #21892 (Closed): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 05:21 PM Bug #21892 (Yet to Verify): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 05:21 PM Bug #21892 (Resolved): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 05:21 PM Bug #21892 (Fixed with Hotfix): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 05:20 PM Bug #21892 (Fixed in Dev): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 05:20 PM Bug #21892 (Open): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 05:28 PM Bug #21889 (Fixed with Hotfix): SP1060-> All reports -> Duplicate NC/OFI Count is displayed. Identified 5 nc's for 2031 but its showing 25 records
- 05:28 PM Bug #21889 (Fixed in Dev): SP1060-> All reports -> Duplicate NC/OFI Count is displayed. Identified 5 nc's for 2031 but its showing 25 records
- 05:27 PM Bug #21889 (Open): SP1060-> All reports -> Duplicate NC/OFI Count is displayed. Identified 5 nc's for 2031 but its showing 25 records
- 05:17 PM Bug #21885 (Closed): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- 05:16 PM Bug #21885 (Resolved): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- 05:16 PM Bug #21885 (Fixed in Dev): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- DUPLICATE
- 05:16 PM Bug #21885 (Open): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- 05:10 PM Bug #21893 (Fixed with Hotfix): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- Fixed as hotfix in CY5 SP1060
- 05:09 PM Bug #21893 (Fixed in Dev): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- 05:09 PM Bug #21893 (Open): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- 04:52 PM Bug #21910 (Fixed with Hotfix): Auto refresh is not working in action page
- Auto refresh is not working in action page
- 04:40 PM Bug #21615 (Closed): All LPA Reports ->Other shift data is displaying but the shift name is displaying as default both filter and chart (High)
- 04:40 PM Bug #21615 (Resolved): All LPA Reports ->Other shift data is displaying but the shift name is displaying as default both filter and chart (High)
- 04:40 PM Bug #21464 (Closed): All New Reports -> The filter and report is showing data's only for default shift. Other shift data's are not displayed
- 04:40 PM Bug #21464 (Resolved): All New Reports -> The filter and report is showing data's only for default shift. Other shift data's are not displayed
- 04:06 PM Bug #21909 (Fixed with Hotfix): Auditee manager request should not displayed based on NC Response Date Extension / Action Owner Change Request Approval
- Auditee manger request is not displayed in action page.
- 02:38 PM Bug #21883 (Fixed in Dev): Correction action page is not loading in calendar view and list view
- 02:38 PM Bug #21881 (Fixed in Dev): Application error is displayed while clicking on audit status, Upload NC, Upload OFI in perform page.
- 01:43 PM Bug #21825 (Closed): All LPA Reports : Year filter is always showing 2021 records when try to view by drilldown on any chart even after selecting some other year
- 01:43 PM Bug #21825 (Resolved): All LPA Reports : Year filter is always showing 2021 records when try to view by drilldown on any chart even after selecting some other year
- 01:24 PM Bug #21616 (Closed): All LPA Reports -> Based on status,Year and month the data's are not filtered
- 01:24 PM Bug #21616 (Resolved): All LPA Reports -> Based on status,Year and month the data's are not filtered
- 12:27 PM Bug #21460 (Closed): All LPA New Reports - Chart ->"Failure Category Not Found" option is need to like process and department
- 12:27 PM Bug #21460 (Resolved): All LPA New Reports - Chart ->"Failure Category Not Found" option is need to like process and department
- 12:25 PM Bug #21455 (Not Resolved): All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be displayed in tabular data similar with layer wise chart
- verified in CY5
- 12:24 PM Bug #21455 (Resolved): All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be displayed in tabular data similar with layer wise chart
- 12:11 PM Bug #21454 (Closed): All LPA New Reports - Process and Department Tabular View -> Process and department name is not getting displayed based on NC / OFI Mapping for each chart and tabular view in bottom
- 12:11 PM Bug #21454 (Resolved): All LPA New Reports - Process and Department Tabular View -> Process and department name is not getting displayed based on NC / OFI Mapping for each chart and tabular view in bottom
- 11:16 AM Bug #21842 (Fixed in Dev): R9->Internal Lab->Getting server error/compilation error when click on attached document.
- 11:16 AM Bug #21865 (Fixed in Dev): R9-->Attachment--> When user tries to view the attached document, it shows the error message
03/18/2021
- 01:51 PM Bug #21897 (Fixed with Hotfix): CSD menu is missing in Suite page.
- CSD menu is missing in Suite page.
- 01:43 PM Bug #21684: 10.6.0-> Audit criteria field need to display below the auditee. Default Auditee select should be corporate
- not fixed
- 01:42 PM Bug #21587: Repeat NC-> Failure category should be displayed based on the audit pro license. Currently failure category displayed from LPA
- Repeat NC option is not displayed
- 01:32 PM Bug #21896 (Fixed with Hotfix): Show all button is displayed for twice in corrective action page.
- Show all button is displayed for twice in corrective action page.
- 01:30 PM Bug #21895 (Fixed with Hotfix): Based on template mandatory field scope, focus, auditee contact's person should be mandatory
- Based on template mandatory field scope, focus, auditee contact's person should be mandatory
- 09:29 AM Unit Level and Cosmetic Issues #21734 (Fixed in Dev): New document req: No need to show scroll bar on clicking on doc type dropdown
- 09:25 AM Unit Level and Cosmetic Issues #21734 (Open): New document req: No need to show scroll bar on clicking on doc type dropdown
- 09:24 AM Bug #21717 (Fixed in Dev): Addition info pop up - Origin date design is not good
- 09:24 AM Bug #21717 (Open): Addition info pop up - Origin date design is not good
- 09:12 AM Bug #21808 (Fixed in Dev): Additional info in New doc req and Doc Pro settings doc type icon: AT times, the data is lost(Not sure abt the cause, faced the issue so many times)
- 09:12 AM Bug #21808 (Open): Additional info in New doc req and Doc Pro settings doc type icon: AT times, the data is lost(Not sure abt the cause, faced the issue so many times)
03/17/2021
- 08:01 PM Bug #21893 (Closed): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#...
- 07:57 PM Bug #21892 (Closed): SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- SP1060-> NC Closure Report (Old) - Status should be multiselect and NC aging label change to "Findings Aging"
- 07:56 PM Bug #21890 (Closed): SP1060->Audit - Adherence to Schedule in % -> Duplicate records are displayed for PPT2 site. One audit is scheduled and completed but its showing couple of audits. also % is wrong for this because of duplicate
- SP1060->Audit - Adherence to Schedule in % -> Duplicate records are displayed for PPT2 site. One audit is scheduled a...
- 07:53 PM Bug #21889 (Closed): SP1060-> All reports -> Duplicate NC/OFI Count is displayed. Identified 5 nc's for 2031 but its showing 25 records
- SP1060-> All reports -> Duplicate NC/OFI Count is displayed. Identified 5 nc's for 2031 but its showing 25 records
- 07:51 PM Bug #21888 (Closed): SP1060-> All reports -> If shift name is same across sites, then we need to show the difference (By showing shift name + site name like department filter)
- SP1060-> All reports -> If shift name is same across sites, then we need to show the difference (By showing shift na...
- 07:50 PM Bug #21887 (Closed): SP1060->All reports -> Filter -> Responsible person name should be same as chart
- SP1060->All reports -> Filter -> Responsible person name should be same as chart
- 07:48 PM Bug #21886 (Closed): SP1060-> LPA Repeat NC & LPA -NC Closure (Old): There is no data for 2021. But its showing the data with default Year as "2021"
- SP1060-> LPA Repeat NC & LPA -NC Closure (Old): There is no data for 2021. But its showing the data with default Year...
- 07:45 PM Bug #21883 (Open): Correction action page is not loading in calendar view and list view
- 04:58 PM Bug #21883 (Fixed with Hotfix): Correction action page is not loading in calendar view and list view
- Correction action page is not loading
- 07:45 PM Bug #21881 (Open): Application error is displayed while clicking on audit status, Upload NC, Upload OFI in perform page.
- 04:12 PM Bug #21881 (Fixed with Hotfix): Application error is displayed while clicking on audit status, Upload NC, Upload OFI in perform page.
- Application error is displayed while clicking on audit status, Upload NC, Upload OFI in perform page
- 07:31 PM Bug #21885 (Closed): Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#21871)
- Reports- > Getting an error while try to view the report after assigning process for some findings (After Fixing bug#...
- 07:11 PM Bug #21450 (Closed): Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- 07:11 PM Bug #21450 (Resolved): Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- 07:09 PM Bug #21449 (Resolved): LPA_Findings Closure Summary : All Charts : Color Code is wrong
- 07:09 PM Bug #21447 (Closed): All New Reports -> Label Changes: 1. Findings Ageing should be renamed as "Findings Aging" 2. Chart : Findings Wise NC & OFI should be renamed as " Findings Category wise NC & OFI"
- 07:09 PM Bug #21447 (Resolved): All New Reports -> Label Changes: 1. Findings Ageing should be renamed as "Findings Aging" 2. Chart : Findings Wise NC & OFI should be renamed as " Findings Category wise NC & OFI"
- 07:08 PM Bug #21448 (Closed): LPA_Findings Classification Summary / Findings Closure Summary / LPA Findings Summary : 1. Finding aging should be displayed as per below. 0-15 15-30 30-45 … Now its showing 1-15
- 07:08 PM Bug #21448 (Resolved): LPA_Findings Classification Summary / Findings Closure Summary / LPA Findings Summary : 1. Finding aging should be displayed as per below. 0-15 15-30 30-45 … Now its showing 1-15
- 06:58 PM Bug #21436 (Closed): After Fixing Bug #21433 -> Duplicate records are displayed in Department Filter for all LPA new reports
- 06:58 PM Bug #21436 (Resolved): After Fixing Bug #21433 -> Duplicate records are displayed in Department Filter for all LPA new reports
- 06:55 PM Bug #21435 (Closed): After Fixing Bug #21433 -> Duplicate records are displayed for all new reports
- 06:55 PM Bug #21435 (Resolved): After Fixing Bug #21433 -> Duplicate records are displayed for all new reports
- 06:54 PM Bug #21433 (Closed): After Fixing Bug #21432 -> All Findings reports are not showing the data in shift and failure category filters. Unable to check the report / Error displayed while try to view report for
- 06:54 PM Bug #21433 (Resolved): After Fixing Bug #21432 -> All Findings reports are not showing the data in shift and failure category filters. Unable to check the report / Error displayed while try to view report for
- 06:53 PM Bug #21432 (Closed): All LPA Findings report is not working / filters are not showing any data
- 06:52 PM Bug #21432 (Resolved): All LPA Findings report is not working / filters are not showing any data
- 06:52 PM Bug #21429 (Closed): LPA Repeat NC & OFI -> Label Changes in Tabular View
- 06:51 PM Bug #21429 (Resolved): LPA Repeat NC & OFI -> Label Changes in Tabular View
- 06:50 PM Bug #21428 (Closed): LPA Repeat NC & OFI -> Various issues in Tabular View
- 06:50 PM Bug #21428 (Resolved): LPA Repeat NC & OFI -> Various issues in Tabular View
- 06:39 PM Bug #21426 (Closed): Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status for Completed and Deadline violated and completed
- 06:36 PM Bug #21426 (Resolved): Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status for Completed and Deadline violated and completed
- 06:26 PM Bug #21425 (Closed): Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion Date -> Time is not showing correctly
- 06:26 PM Bug #21425 (Resolved): Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion Date -> Time is not showing correctly
- 06:22 PM Bug #21424 (Closed): Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 2020 audits are there but its not displaying in chart
- 06:22 PM Bug #21424 (Resolved): Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 2020 audits are there but its not displaying in chart
- 06:13 PM Bug #21420 (Closed): LPA Audit Adherence (Old) -> Chart View -> Total Percentage / Completed Percentage is not displaying for the year which is showing 2nd place in chart
- 06:13 PM Bug #21420 (Resolved): LPA Audit Adherence (Old) -> Chart View -> Total Percentage / Completed Percentage is not displaying for the year which is showing 2nd place in chart
- 05:35 PM Bug #21419 (Closed): LPA Audit Adherence (Old) -> Tabular View -> In chat , The data's are showing for the Year 2021 and 2023. But in tabular view, 2021 record only displayed. 2023 is not displaying
- 05:35 PM Bug #21419 (Resolved): LPA Audit Adherence (Old) -> Tabular View -> In chat , The data's are showing for the Year 2021 and 2023. But in tabular view, 2021 record only displayed. 2023 is not displaying
- 05:33 PM Bug #21423 (Closed): Audit - Adherence to Schedule in % (Old) -> Tabular View -> Label changes in tabular view
- 05:33 PM Bug #21423 (Resolved): Audit - Adherence to Schedule in % (Old) -> Tabular View -> Label changes in tabular view
- 05:32 PM Bug #21841 (Resolved): R9->External Lab->Valid date search is not working.
- 05:32 PM Bug #21841 (Fixed in Dev): R9->External Lab->Valid date search is not working.
- 05:31 PM Bug #21422 (Closed): Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multiple data's
- 05:31 PM Bug #21422 (Resolved): Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multiple data's
- 05:25 PM Bug #21857 (Resolved): R9-> Whenever the entered Requested by/Submitted by code is cleared/deleted, the data of Email Id ,Name and Mobile Number is getting delete from the their respective field .
- 05:25 PM Bug #21857 (Fixed in Dev): R9-> Whenever the entered Requested by/Submitted by code is cleared/deleted, the data of Email Id ,Name and Mobile Number is getting delete from the their respective field .
- 05:13 PM Bug #21866 (Resolved): R9 & 10--> Attachment Icon --> Once the study is completed, need to disable the attachment icon. After clicking on save and submit button, the system should allows user to attach the document
- 05:12 PM Bug #21866 (Fixed in Dev): R9 & 10--> Attachment Icon --> Once the study is completed, need to disable the attachment icon. After clicking on save and submit button, the system should allows user to attach the document
- 10:42 AM Bug #21866 (Open): R9 & 10--> Attachment Icon --> Once the study is completed, need to disable the attachment icon. After clicking on save and submit button, the system should allows user to attach the document
- 04:57 PM Bug #21867 (Resolved): R9 & R10--> When user tries to enter the Code of different user which is not in the Incharge person list of selected lab information. It should display the alert like "The selected user is not in the Incharge person list of Selected Lab information"
- 04:57 PM Bug #21867 (Fixed in Dev): R9 & R10--> When user tries to enter the Code of different user which is not in the Incharge person list of selected lab information. It should display the alert like "The selected user is not in the Incharge person list of Selected Lab information"
- 10:42 AM Bug #21867 (Open): R9 & R10--> When user tries to enter the Code of different user which is not in the Incharge person list of selected lab information. It should display the alert like "The selected user is not in the Incharge person list of Selected Lab information"
- 04:55 PM Bug #21870 (Resolved): R9->Internal lab inspection-> Search functionality is not working->Its showing loading whenever tries to search fields.
- 04:55 PM Bug #21870 (Fixed in Dev): R9->Internal lab inspection-> Search functionality is not working->Its showing loading whenever tries to search fields.
- 10:42 AM Bug #21870 (Open): R9->Internal lab inspection-> Search functionality is not working->Its showing loading whenever tries to search fields.
- 04:35 PM Bug #21873 (Resolved): R9->Internal lab inspection details is not refreshing whenever change the lab name from one lab to another lab .Due to this non incharge person able to complete the study.Please refer screenshot
- 04:35 PM Bug #21873 (Fixed in Dev): R9->Internal lab inspection details is not refreshing whenever change the lab name from one lab to another lab .Due to this non incharge person able to complete the study.Please refer screenshot
- 10:42 AM Bug #21873 (Open): R9->Internal lab inspection details is not refreshing whenever change the lab name from one lab to another lab .Due to this non incharge person able to complete the study.Please refer screenshot
- 04:27 PM Bug #21416 (Closed): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- 04:27 PM Bug #21416 (Resolved): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- 04:19 PM Bug #21413 (Closed): LPA NC Closure (Old) - Tabular View is not showing as per requirement. Equipment's should be displayed as column wise and Other fields should be displayed as Row Wise
- 04:18 PM Bug #21413 (Resolved): LPA NC Closure (Old) - Tabular View is not showing as per requirement. Equipment's should be displayed as column wise and Other fields should be displayed as Row Wise
- 04:11 PM Bug #21402 (Closed): LPA Findings Classification Summary : All Charts -> Tabular data's are not displaying as per specification. Only Count is displayed. The information "Count of Status" is missing
- 04:11 PM Bug #21402 (Resolved): LPA Findings Classification Summary : All Charts -> Tabular data's are not displaying as per specification. Only Count is displayed. The information "Count of Status" is missing
- 04:09 PM Bug #21401 (Closed): LPA Findings Classification Summary : ShiftWise and Failure Category Wise NC/OFI & Correction Closeout chart is missing (As per requirement)
- 04:09 PM Bug #21401 (Resolved): LPA Findings Classification Summary : ShiftWise and Failure Category Wise NC/OFI & Correction Closeout chart is missing (As per requirement)
- 04:06 PM Bug #21400 (Closed): LPA Findings Summary & Classification Report : Summary report in bottom : Various issues in this tabular format
- 04:06 PM Bug #21400 (Resolved): LPA Findings Summary & Classification Report : Summary report in bottom : Various issues in this tabular format
- 04:02 PM Bug #21398 (Resolved): LPA Findings Summary & Classification Report : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- 03:56 PM Bug #21397 (Closed): LPA Findings Summary Chart : ShiftWise Pareto report is missing (As per requirement)
- 03:56 PM Bug #21397 (Resolved): LPA Findings Summary Chart : ShiftWise Pareto report is missing (As per requirement)
- 03:52 PM Bug #21845 (Resolved): R9->Internal Lab->Need to change the alert label->When tries to delete the dependency internal lab details, it showing "External lab dependencies" instead of "Internal lab dependencies"->Please refer screenshot
- 03:48 PM Bug #21396 (Closed): LPA Findings Summary & Classification Report : ALL Chart View : Total count and status count is not displayed
- 03:48 PM Bug #21396 (Resolved): LPA Findings Summary & Classification Report : ALL Chart View : Total count and status count is not displayed
- 03:43 PM Bug #21395 (Closed): LPA Findings Summary & Classification Report : All Charts : Label Changes
- 03:42 PM Bug #21395 (Resolved): LPA Findings Summary & Classification Report : All Charts : Label Changes
- 03:38 PM Bug #21394 (Closed): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 03:38 PM Bug #21394 (Resolved): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 03:35 PM Bug #21393 (Closed): LPA Findings Summary / Classification : Overall NC & OFI Count Chart and NC Aging tabular report is missing (As Per Requirement)
- 03:34 PM Bug #21393 (Resolved): LPA Findings Summary / Classification : Overall NC & OFI Count Chart and NC Aging tabular report is missing (As Per Requirement)
- 03:24 PM Bug #21392 (Closed): LPA Findings Summary & LPA Findings Classification Summary : Equipment Code Filter : All available data's are not displayed
- 03:24 PM Bug #21392 (Resolved): LPA Findings Summary & LPA Findings Classification Summary : Equipment Code Filter : All available data's are not displayed
- 03:22 PM Bug #21391 (Closed): LPA Findings Summary & LPA Findings Classification Summary : Equipment Type Filter : Irrelevant data's are displayed (Only Special characters data which is not available in equipment type list)
- 03:22 PM Bug #21391 (Resolved): LPA Findings Summary & LPA Findings Classification Summary : Equipment Type Filter : Irrelevant data's are displayed (Only Special characters data which is not available in equipment type list)
- 03:14 PM Bug #21856 (Resolved): R9->Once the Internal lab inspection details is saved, then system should not allow to select Lab name .Need to Restrict to select lab name after clicking on save button.
- 03:09 PM Bug #21862 (Resolved): R9->Reset/deleted parent level name again showing under the parent level.
- 02:26 PM Bug #21286 (Closed): LPA_Findings Closure & LPA Findings Summary & Classification Report : Drill Indication – Hand icon is not displaying on chart for equipment wise NC/OFI
- 02:26 PM Bug #21286 (Resolved): LPA_Findings Closure & LPA Findings Summary & Classification Report : Drill Indication – Hand icon is not displaying on chart for equipment wise NC/OFI
- 02:23 PM Bug #21285 (Closed): LPA_Findings Closure & LPA Findings Summary & Classification Report :All chars and tabular View : Responsible person name should be displayed as per web application ( As per settings)
- 02:22 PM Bug #21285 (Resolved): LPA_Findings Closure & LPA Findings Summary & Classification Report :All chars and tabular View : Responsible person name should be displayed as per web application ( As per settings)
- 02:17 PM Bug #21656 (Yet to Verify): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- 02:17 PM Bug #21656 (Resolved): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- 02:16 PM Bug #21440 (Yet to Verify): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 02:16 PM Bug #21440 (Resolved): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 01:33 PM Bug #21417 (Yet to Verify): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- 01:33 PM Bug #21417 (Resolved): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- 01:31 PM Bug #21415 (Not Resolved): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 01:31 PM Bug #21415 (Resolved): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 01:30 PM Bug #21284 (Closed): LPA_Findings Closure : All charts : The status is not showing as per application (All Status).. In application 7 Not closed out and 2 closed out data's are there. But in report not closed out 8, closed out 0 is displaying.
- 01:30 PM Bug #21284 (Resolved): LPA_Findings Closure : All charts : The status is not showing as per application (All Status).. In application 7 Not closed out and 2 closed out data's are there. But in report not closed out 8, closed out 0 is displaying.
- 01:01 PM Bug #21283 (Closed): LPA_FindingsClosure : Chart : Shiftwise Pareto report is missing (As per requirement)
- 01:01 PM Bug #21283 (Resolved): LPA_FindingsClosure : Chart : Shiftwise Pareto report is missing (As per requirement)
- 01:00 PM Bug #21282 (Closed): LPA_FindingsClosure : Summary Report In bottom: The below column name has to change
- 01:00 PM Bug #21282 (Resolved): LPA_FindingsClosure : Summary Report In bottom: The below column name has to change
- 12:59 PM Bug #21281 (Closed): LPA_FindingsClosure : Summary Report In bottom : Days Taken / Exceeded to close the nc : The showing data is not relevant with actual days
- 12:59 PM Bug #21281 (Resolved): LPA_FindingsClosure : Summary Report In bottom : Days Taken / Exceeded to close the nc : The showing data is not relevant with actual days
- 12:56 PM Bug #21280 (Closed): LPA_Findings Closure - Summary Report In bottom : Problem on viewing data's
- 12:55 PM Bug #21280 (Resolved): LPA_Findings Closure - Summary Report In bottom : Problem on viewing data's
- 12:54 PM Bug #21279 (Closed): LPA_Findings Closure : Summary Report In bottom : Only one record is displayed. But in chart couple of data’s available
- 12:53 PM Bug #21279 (Resolved): LPA_Findings Closure : Summary Report In bottom : Only one record is displayed. But in chart couple of data’s available
- 12:52 PM Bug #21278 (Closed): LPA_FindingsClosure : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- 12:52 PM Bug #21278 (Resolved): LPA_FindingsClosure : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- 12:51 PM Bug #21277 (Closed): LPA_FindingsClosure : All Charts View : Total count and status count is not displayed
- 12:51 PM Bug #21277 (Resolved): LPA_FindingsClosure : All Charts View : Total count and status count is not displayed
- 12:49 PM Bug #21276 (Closed): LPA_FindingsClosure : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 12:49 PM Bug #21276 (Resolved): LPA_FindingsClosure : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 12:48 PM Bug #21275 (Resolved): LPA_FindingsClosure : All Charts : Label Changes
- 12:45 PM Bug #21273 (Closed): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- 12:45 PM Bug #21273 (Resolved): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- 12:35 PM Bug #21827 (Closed): All LPA reports -> & is displayed as & in on checklist name field (In chart & Tabular)
- 12:34 PM Bug #21827 (Resolved): All LPA reports -> & is displayed as & in on checklist name field (In chart & Tabular)
- 11:51 AM Bug #21826 (Closed): All LPA Reports -> Equipment Code is showing wrong data's. The relevant data's are not displayed
- 11:51 AM Bug #21826 (Resolved): All LPA Reports -> Equipment Code is showing wrong data's. The relevant data's are not displayed
Also available in: Atom