Activity
From 10/27/2022 to 11/25/2022
11/25/2022
- 07:39 PM Bug #25495 (In Progress): Project Status is not getting displayed in Initiate Problem Solving phase.
- 06:29 PM Bug #25268 (Closed): Risk Setup- Suggesting to include risk set up option inside CM module for Omnex Risk forms
- Reported issue fixed- Color code selection issue for priority score reported to Anand.
- 01:17 PM Bug #25268 (Resolved): Risk Setup- Suggesting to include risk set up option inside CM module for Omnex Risk forms
- 06:06 PM Bug #25483 (Closed): Project Competency Report not showing data
- 06:06 PM Bug #25483 (Resolved): Project Competency Report not showing data
- This is not an issue, understanding problem, so closing this issue here.
- 06:01 PM Bug #25483 (Fixed with Hotfix): Project Competency Report not showing data
- 06:00 PM Bug #25483 (Fixed in Dev): Project Competency Report not showing data
- Not an issue.Working fine
- 03:57 PM Bug #25521 (Closed): Item boundaries – The checkbox for child and external elements is not disabled.
- Item boundaries – The checkbox for child and external elements is not disabled.
- 03:36 PM Bug #25458 (Resolved): 'Supplier Evaluation', 'Engagement Model', 'Supplier Audit Status', 'Change Password' menus are available under Supplier setup
- 03:36 PM Bug #25458 (Fixed in Dev): 'Supplier Evaluation', 'Engagement Model', 'Supplier Audit Status', 'Change Password' menus are available under Supplier setup
- 02:26 PM Bug #25380 (Closed): 11.2.0 pending issues
- Issue no : 9,16,22 are moved to future release
- 01:17 PM Bug #25380 (Resolved): 11.2.0 pending issues
- 01:12 PM Bug #25477 (Resolved): Block diagram – Element duplicating when the element is removed and again added in the Add/Remove Element from Item boundaries, Interface matrix, Interface function matrix, Combined interface matrix.
- 10:47 AM Bug #25477 (Fixed with Hotfix): Block diagram – Element duplicating when the element is removed and again added in the Add/Remove Element from Item boundaries, Interface matrix, Interface function matrix, Combined interface matrix.
- 01:11 PM Bug #25515 (Closed): MSA:-All published document in MULTI SITE not able to seen in doc pro side with created level.
- 1.All published document in MULTI SITE it is not able to seen in doc pro side with created level.
- 12:25 PM Bug #25498 (Closed): Gage/Instruments : Can able to change gage details even after submitting a lot
- 12:25 PM Bug #25497 (Closed): Final Inspection(sample value entry popup) : Containment action not working
- 12:25 PM Bug #25496 (Closed): Calval report : Getting empty page report not displaying
- 12:07 PM Bug #25450 (Resolved): Actions Menu - On selecting the Requirement(s) Reviewed tab, it is not highlighted. But page is loading properly after selection.(Refer Description)
- 12:02 PM Bug #25512 (Closed): Sorting is not working in Item boundaries, Interface matrix, combined interface matrix, and Interface type
- Sorting is not working in Item boundaries, Interface matrix, combined interface matrix, and Interface type
- 12:01 PM Bug #25511 (Closed): Block diagram-when user try to add negetive in lable and change the interface type along with position of label need to change.
- Block diagram-when user try to add negetive in lable and change the interface type along with position of label need ...
- 11:53 AM Bug #25329 (Resolved): Supplier IPTV Reports is not working
- fix handled in report deployment by BI team
- 11:52 AM Bug #25329 (Fixed in Dev): Supplier IPTV Reports is not working
- 11:52 AM Bug #25329 (In Progress): Supplier IPTV Reports is not working
- 11:43 AM Bug #25206 (Resolved): VOC – Duplicating one reviewer as a mandatory and nonmandatory reviewer, While stopping the review and again sending for a review.
- 11:43 AM Bug #25144 (Resolved): VOC – After the VOC is approved, the form is not displayed while trying to Initiate change request
- 10:53 AM Bug #25448 (Closed): New menu showing inside APQP Project Setup with 404 Error
- 10:53 AM Bug #25494 (Closed): Left main menu is not showing
- 10:38 AM Bug #24973 (Closed): The TPM menu tab is not showing on the left side of the screen once the user is given access to the TPM module. After logout and login the application, it is working as expected.
- 09:16 AM Bug #24973 (Resolved): The TPM menu tab is not showing on the left side of the screen once the user is given access to the TPM module. After logout and login the application, it is working as expected.
- 08:35 AM Bug #24973 (Future Release): The TPM menu tab is not showing on the left side of the screen once the user is given access to the TPM module. After logout and login the application, it is working as expected.
- 10:26 AM Bug #25501 (Resolved): In Supplier Self-Evaluation, Files attached by Supplier can be deleted by the SQE
- 10:25 AM Bug #25501 (Fixed in Dev): In Supplier Self-Evaluation, Files attached by Supplier can be deleted by the SQE
- 10:14 AM Bug #25503 (Resolved): In SEM audit, when Raising NCs its not getting displayed in the newly created NC details grid.
- 10:12 AM Bug #25503 (Fixed in Dev): In SEM audit, when Raising NCs its not getting displayed in the newly created NC details grid.
- 10:14 AM Bug #25500 (Resolved): During export into PDF of PSA audit checklists, 'Supplier score' and 'Supplier Remarks' columns are missing
- 10:12 AM Bug #25500 (Fixed in Dev): During export into PDF of PSA audit checklists, 'Supplier score' and 'Supplier Remarks' columns are missing
- 10:14 AM Bug #25140 (Resolved): SQE's of the suppliers is not listing when we try to change the Lead Auditor in PSA audit schedule.
- 10:12 AM Bug #25140 (Fixed in Dev): SQE's of the suppliers is not listing when we try to change the Lead Auditor in PSA audit schedule.
- 10:13 AM Bug #25504 (Fixed in Dev): In Supplier evaluation Tab, filled checklist of Initial assessment Audit is not opening. Working fine for Ongoing Audits
- 10:13 AM Bug #25502 (Fixed in Dev): After scheduling a SEM audit, while the Audit schedule page loads, it shows Validation error "Start date should be less than the end date" and audits are created in "Awaiting for Approval" status
- 09:04 AM Bug #25413 (Closed): In Groups, Under Audit Administrator, "Supplier Audit Status" is available for twice.
- 02:44 AM Bug #25413 (Resolved): In Groups, Under Audit Administrator, "Supplier Audit Status" is available for twice.
- 02:43 AM Bug #25413 (Fixed in Dev): In Groups, Under Audit Administrator, "Supplier Audit Status" is available for twice.
- 08:33 AM Bug #25510 (Open): In Possible Cause, data Entered in 8D Gabriel form is not reflecting in Fish Bone.
- 02:18 AM Bug #25510 (Closed): In Possible Cause, data Entered in 8D Gabriel form is not reflecting in Fish Bone.
- In Possible Cause, data Entered in 8D Gabriel form is not reflecting in Fish Bone.
11/24/2022
- 05:51 PM Bug #25477 (Fixed in Dev): Block diagram – Element duplicating when the element is removed and again added in the Add/Remove Element from Item boundaries, Interface matrix, Interface function matrix, Combined interface matrix.
- 03:45 PM Bug #25506 (Open): Reports menu getting Service error whenever the new deployment is done in the site
- 11:12 AM Bug #25506 (Closed): Reports menu getting Service error whenever the new deployment is done in the site
- Reports menu getting Service error whenever the new deployment is done in the site
- 03:45 PM Bug #25504 (Open): In Supplier evaluation Tab, filled checklist of Initial assessment Audit is not opening. Working fine for Ongoing Audits
- 03:45 PM Bug #25503 (Open): In SEM audit, when Raising NCs its not getting displayed in the newly created NC details grid.
- 03:45 PM Bug #25502 (Open): After scheduling a SEM audit, while the Audit schedule page loads, it shows Validation error "Start date should be less than the end date" and audits are created in "Awaiting for Approval" status
- 03:45 PM Bug #25501 (Open): In Supplier Self-Evaluation, Files attached by Supplier can be deleted by the SQE
- 03:45 PM Bug #25500 (Open): During export into PDF of PSA audit checklists, 'Supplier score' and 'Supplier Remarks' columns are missing
- 03:45 PM Bug #25495 (Open): Project Status is not getting displayed in Initiate Problem Solving phase.
- 01:51 PM Bug #25468 (Closed): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the attached files are not getting saved.
- Except certain file formats, we can able to attach and save.
- 01:35 PM Bug #25468 (Resolved): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the attached files are not getting saved.
- 01:35 PM Bug #25468 (Fixed in Dev): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the attached files are not getting saved.
- 01:41 PM Bug #25464 (Resolved): Label Issues : Typos in 'Onboarding' and 'Self Assessment' of Landing page. 'THLSupplierConcern' in Groups
- 01:41 PM Bug #25464 (Fixed in Dev): Label Issues : Typos in 'Onboarding' and 'Self Assessment' of Landing page. 'THLSupplierConcern' in Groups
- 10:18 AM Bug #25466 (Closed): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the Attach file option is still disabled, even if we select 'Yes'. Refer screenshot.
- 09:53 AM Bug #25466 (Resolved): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the Attach file option is still disabled, even if we select 'Yes'. Refer screenshot.
- 09:53 AM Bug #25466 (Fixed in Dev): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the Attach file option is still disabled, even if we select 'Yes'. Refer screenshot.
- 10:17 AM Bug #25462 (Closed): The newly created suppliers are not getting mapped with the existing Audit Standards automatically.
- 09:49 AM Bug #25462 (Resolved): The newly created suppliers are not getting mapped with the existing Audit Standards automatically.
- 09:49 AM Bug #25462 (Fixed in Dev): The newly created suppliers are not getting mapped with the existing Audit Standards automatically.
- 01:33 AM Bug #25498 (Resolved): Gage/Instruments : Can able to change gage details even after submitting a lot
- 01:33 AM Bug #25498 (Open): Gage/Instruments : Can able to change gage details even after submitting a lot
- 01:33 AM Bug #25497 (Resolved): Final Inspection(sample value entry popup) : Containment action not working
- 01:33 AM Bug #25497 (Open): Final Inspection(sample value entry popup) : Containment action not working
- 01:33 AM Bug #25496 (Resolved): Calval report : Getting empty page report not displaying
- 01:33 AM Bug #25496 (Open): Calval report : Getting empty page report not displaying
- 12:55 AM Bug #25494 (Resolved): Left main menu is not showing
- 12:55 AM Bug #25494 (Fixed in Dev): Left main menu is not showing
11/23/2022
- 09:21 PM Bug #25002 (Closed): Cant able to save New Process
- 12:46 AM Bug #25002 (Resolved): Cant able to save New Process
- 12:46 AM Bug #25002 (Fixed in Dev): Cant able to save New Process
- 09:19 PM Bug #25479 (Closed): Fish bone is not opening in Forms
- 12:18 AM Bug #25479 (Resolved): Fish bone is not opening in Forms
- 12:18 AM Bug #25479 (Fixed in Dev): Fish bone is not opening in Forms
- 09:18 PM Bug #25481 (Closed): Gabriel form is not working Properly
- 12:19 AM Bug #25481 (Resolved): Gabriel form is not working Properly
- 12:19 AM Bug #25481 (Fixed in Dev): Gabriel form is not working Properly
- 09:18 PM Bug #25485 (Closed): In New Concern, Once the part is selected and if the user tries to select an option in failure mode, it shows no data but once we save the concern and refresh then failure mode is loading.
- 12:17 AM Bug #25485 (Resolved): In New Concern, Once the part is selected and if the user tries to select an option in failure mode, it shows no data but once we save the concern and refresh then failure mode is loading.
- 12:17 AM Bug #25485 (Fixed in Dev): In New Concern, Once the part is selected and if the user tries to select an option in failure mode, it shows no data but once we save the concern and refresh then failure mode is loading.
- 04:07 PM Bug #25504 (Closed): In Supplier evaluation Tab, filled checklist of Initial assessment Audit is not opening. Working fine for Ongoing Audits
- In Supplier evaluation Tab, filled checklist of Initial assessment Audit is not opening. Working fine for Ongoing Audits
- 04:05 PM Bug #25503 (Closed): In SEM audit, when Raising NCs its not getting displayed in the newly created NC details grid.
- In SEM audit, when Raising NCs its not getting displayed in the newly created NC details grid.
- 04:02 PM Bug #25502 (Closed): After scheduling a SEM audit, while the Audit schedule page loads, it shows Validation error "Start date should be less than the end date" and audits are created in "Awaiting for Approval" status
- After scheduling a SEM audit, while the Audit schedule page loads, it shows Validation error "Start date should be le...
- 04:01 PM Bug #25501 (Closed): In Supplier Self-Evaluation, Files attached by Supplier can be deleted by the SQE
- In Supplier Self-Evaluation, Files attached by Supplier can be deleted by the SQE
- 03:59 PM Bug #25500 (Closed): During export into PDF of PSA audit checklists, 'Supplier score' and 'Supplier Remarks' columns are missing
- While export into PDF of PSA audit checklist, 'Supplier score' and 'Supplier Remarks' columns are missing
- 11:40 AM Bug #25087 (Closed): Common in All TPM Sub menu's --> Need to remove the breadcrumb under the submenu
- 11:28 AM Bug #25087 (Resolved): Common in All TPM Sub menu's --> Need to remove the breadcrumb under the submenu
- 11:40 AM Bug #25461 (Closed): 'Force update Password' in Supplier User creation screen is checked by default for all Supplier users.
- 12:08 AM Bug #25461 (Resolved): 'Force update Password' in Supplier User creation screen is checked by default for all Supplier users.
- 12:08 AM Bug #25461 (Fixed in Dev): 'Force update Password' in Supplier User creation screen is checked by default for all Supplier users.
- 11:40 AM Bug #25391 (Closed): UBM WORK ORDER:- Under pm supervisor calendar the scheduled "ubm" is not generating .
- 11:28 AM Bug #25391 (Resolved): UBM WORK ORDER:- Under pm supervisor calendar the scheduled "ubm" is not generating .
- 11:37 AM Bug #25459 (Closed): "Temporary Pseudocode while Onboarding suppliers" is not available in the Supplier Business rule
- 11:36 AM Bug #25459 (Resolved): "Temporary Pseudocode while Onboarding suppliers" is not available in the Supplier Business rule
- 11:36 AM Bug #25459 (Fixed in Dev): "Temporary Pseudocode while Onboarding suppliers" is not available in the Supplier Business rule
- 11:35 AM Bug #25468 (Not Resolved): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the attached files are not getting saved.
- This issue still exists.
- 12:08 AM Bug #25468 (Resolved): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the attached files are not getting saved.
- 12:08 AM Bug #25468 (Fixed in Dev): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the attached files are not getting saved.
- 11:32 AM Bug #25466 (Not Resolved): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the Attach file option is still disabled, even if we select 'Yes'. Refer screenshot.
- The issue still exists.
Please refer the recent screenshots. - 12:08 AM Bug #25466 (Resolved): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the Attach file option is still disabled, even if we select 'Yes'. Refer screenshot.
- 12:08 AM Bug #25466 (Fixed in Dev): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the Attach file option is still disabled, even if we select 'Yes'. Refer screenshot.
- 11:28 AM Bug #25413 (Not Resolved): In Groups, Under Audit Administrator, "Supplier Audit Status" is available for twice.
- The issue is not resolved.
Please refer the recent screenshot - 12:08 AM Bug #25413 (Resolved): In Groups, Under Audit Administrator, "Supplier Audit Status" is available for twice.
- 12:08 AM Bug #25413 (Fixed in Dev): In Groups, Under Audit Administrator, "Supplier Audit Status" is available for twice.
- 11:25 AM Bug #25464 (Not Resolved): Label Issues : Typos in 'Onboarding' and 'Self Assessment' of Landing page. 'THLSupplierConcern' in Groups
- The spelling of Assessment is still mis-spelled as 'Assesstment'.
Please refer the recent screenshot - 12:08 AM Bug #25464 (Resolved): Label Issues : Typos in 'Onboarding' and 'Self Assessment' of Landing page. 'THLSupplierConcern' in Groups
- 12:08 AM Bug #25464 (Fixed in Dev): Label Issues : Typos in 'Onboarding' and 'Self Assessment' of Landing page. 'THLSupplierConcern' in Groups
- 11:23 AM Bug #25465 (Closed): In Widgets page, multiple widgets are available under the same name'Dashboard'. Refer screenshot.
- 12:08 AM Bug #25465 (Resolved): In Widgets page, multiple widgets are available under the same name'Dashboard'. Refer screenshot.
- 12:08 AM Bug #25465 (Fixed in Dev): In Widgets page, multiple widgets are available under the same name'Dashboard'. Refer screenshot.
- 11:22 AM Bug #25471 (Closed): Supplier Login : Supplier Performance Monitoring report shows the details of all other suppliers
- 12:08 AM Bug #25471 (Resolved): Supplier Login : Supplier Performance Monitoring report shows the details of all other suppliers
- 12:08 AM Bug #25471 (Fixed in Dev): Supplier Login : Supplier Performance Monitoring report shows the details of all other suppliers
- 11:22 AM Bug #25472 (Closed): In Supplier Login, Supplier Declaration and Statutory checklist displays the details of all suppliers.
- 12:08 AM Bug #25472 (Resolved): In Supplier Login, Supplier Declaration and Statutory checklist displays the details of all suppliers.
- 12:08 AM Bug #25472 (Fixed in Dev): In Supplier Login, Supplier Declaration and Statutory checklist displays the details of all suppliers.
- 11:21 AM Bug #25473 (Closed): Irrelevant menu,'Change Password' ,is available in Supplier management. And clicking on it, 'Supplier Audit Status' page is opening.
- 12:08 AM Bug #25473 (Resolved): Irrelevant menu,'Change Password' ,is available in Supplier management. And clicking on it, 'Supplier Audit Status' page is opening.
- 12:08 AM Bug #25473 (Fixed in Dev): Irrelevant menu,'Change Password' ,is available in Supplier management. And clicking on it, 'Supplier Audit Status' page is opening.
- 11:13 AM Bug #25474 (Closed): Old Supplier Import excel file is available under 'Import Format' button. Need to embed the updated Import format file
- 12:08 AM Bug #25474 (Resolved): Old Supplier Import excel file is available under 'Import Format' button. Need to embed the updated Import format file
- 12:08 AM Bug #25474 (Fixed in Dev): Old Supplier Import excel file is available under 'Import Format' button. Need to embed the updated Import format file
- 09:13 AM Bug #25498 (Closed): Gage/Instruments : Can able to change gage details even after submitting a lot
- After accept/rejecting and submitting a lot gage/instrument should not be able to change but here even after submitt...
- 09:09 AM Bug #25497 (Closed): Final Inspection(sample value entry popup) : Containment action not working
- When giving outofspec value need to enter containment action in sample entry popup but containment action is read onl...
- 09:04 AM Bug #25496 (Closed): Calval report : Getting empty page report not displaying
- CalVal Report not working only blank page is displaying
- 12:08 AM Bug #25482 (Resolved): Change password menu for Supplier user is missing
- 12:08 AM Bug #25482 (Fixed in Dev): Change password menu for Supplier user is missing
- 12:08 AM Bug #25448 (Resolved): New menu showing inside APQP Project Setup with 404 Error
- 12:08 AM Bug #25448 (Fixed in Dev): New menu showing inside APQP Project Setup with 404 Error
- 12:08 AM Bug #25424 (Resolved): Landing page- Showing dashboard widget multiple times in the landing page
- 12:08 AM Bug #25424 (Fixed in Dev): Landing page- Showing dashboard widget multiple times in the landing page
11/22/2022
- 05:20 PM Bug #25469 (Closed): Master GAGE:-[ "Gage defective , Risk of condition to product ,Corrective Action" text fields is not showing.
- 05:19 PM Bug #25470 (Closed): Master gage :-IF you Un check the Access right of "EQUIPMENT STATUS UPDATER" In Groups menu the Status text field in MASTER GAGE should be as black colour we cant change the status.
- 01:27 PM Bug #25493 (Closed): When there is no sampling plan is added and when trying to add new sampling plan getting" data with similar production item/supplier already exists" alert
- 01:27 PM Bug #25492 (Closed): Production Inprocess operator selection --> "receiving inspection-A" is coming as default (Note: this operation is added under global and deleted still reflecting in Inprocess inspection)
- 01:27 PM Bug #25491 (Closed): Inspection Parameter(Publish) : When new user is assigned as approver for publishing even after approving operation is not reflecting in inspection sheet
- 01:27 PM Bug #25490 (Closed): Allow to modify all inspection : Can able to modify all inspection even without enabling in business rule
- 01:27 PM Bug #25489 (Closed): Allow to create same lot number for each user : Even in both cases(Enable and disable) can able to create same lot number for each user
- 09:14 AM Bug #25495 (Closed): Project Status is not getting displayed in Initiate Problem Solving phase.
- Project Status is not getting displayed in Initiate Problem Solving phase.
- 08:57 AM Bug #25460 (Closed): Cannot able to Schedule PSA audit. Schedule Audit page is loading as empty page
- 08:57 AM Bug #25463 (Closed): Audits are not loading in the Perform Audit page.
11/21/2022
- 06:53 PM Bug #25494 (Open): Left main menu is not showing
- 12:53 PM Bug #25494 (Closed): Left main menu is not showing
- If there are all module rights, user can't see all main menus in the left menu
- 12:51 PM Bug #25493 (Resolved): When there is no sampling plan is added and when trying to add new sampling plan getting" data with similar production item/supplier already exists" alert
- 12:51 PM Bug #25493 (Open): When there is no sampling plan is added and when trying to add new sampling plan getting" data with similar production item/supplier already exists" alert
- 09:22 AM Bug #25493 (Closed): When there is no sampling plan is added and when trying to add new sampling plan getting" data with similar production item/supplier already exists" alert
- When there is no sampling plan is created and trying to create new sampling plan getting "data already exists error" ...
- 12:51 PM Bug #25492 (Resolved): Production Inprocess operator selection --> "receiving inspection-A" is coming as default (Note: this operation is added under global and deleted still reflecting in Inprocess inspection)
- 12:51 PM Bug #25492 (Open): Production Inprocess operator selection --> "receiving inspection-A" is coming as default (Note: this operation is added under global and deleted still reflecting in Inprocess inspection)
- 09:18 AM Bug #25492 (Closed): Production Inprocess operator selection --> "receiving inspection-A" is coming as default (Note: this operation is added under global and deleted still reflecting in Inprocess inspection)
- When Operation is created under global in inspection parameter and even after deleting that particular operation stil...
- 12:51 PM Bug #25491 (Resolved): Inspection Parameter(Publish) : When new user is assigned as approver for publishing even after approving operation is not reflecting in inspection sheet
- 12:51 PM Bug #25491 (Open): Inspection Parameter(Publish) : When new user is assigned as approver for publishing even after approving operation is not reflecting in inspection sheet
- 09:12 AM Bug #25491 (Closed): Inspection Parameter(Publish) : When new user is assigned as approver for publishing even after approving operation is not reflecting in inspection sheet
- Module auto approval is working but when giving an separate user as approver then even after approving operations are...
- 12:51 PM Bug #25490 (Resolved): Allow to modify all inspection : Can able to modify all inspection even without enabling in business rule
- 12:51 PM Bug #25490 (Open): Allow to modify all inspection : Can able to modify all inspection even without enabling in business rule
- 09:08 AM Bug #25490 (Closed): Allow to modify all inspection : Can able to modify all inspection even without enabling in business rule
- When allow to modify all inspection is enabled user should able to make changes of other user's inspected vale, but h...
- 12:51 PM Bug #25489 (Resolved): Allow to create same lot number for each user : Even in both cases(Enable and disable) can able to create same lot number for each user
- 12:51 PM Bug #25489 (Open): Allow to create same lot number for each user : Even in both cases(Enable and disable) can able to create same lot number for each user
- 09:03 AM Bug #25489 (Closed): Allow to create same lot number for each user : Even in both cases(Enable and disable) can able to create same lot number for each user
- When allow to create same lot number is enabled in business rule, other user should able to use same lot number while...
- 10:47 AM Bug #25206 (Fixed with Hotfix): VOC – Duplicating one reviewer as a mandatory and nonmandatory reviewer, While stopping the review and again sending for a review.
- 10:47 AM Bug #25144 (Fixed with Hotfix): VOC – After the VOC is approved, the form is not displayed while trying to Initiate change request
- 10:46 AM Bug #25484 (Fixed with Hotfix): On initating CR from FST the form is getting closed automatically and the icon to open the cr form is not clickable
- 10:42 AM Bug #25365 (Fixed with Hotfix): FMEDA-Functionality is not correct
- 10:42 AM Bug #25450 (Fixed with Hotfix): Actions Menu - On selecting the Requirement(s) Reviewed tab, it is not highlighted. But page is loading properly after selection.(Refer Description)
- 10:21 AM Bug #25013 (Resolved): Block diagram – Able to move the label from the interface line
- Discussed with Sabu. Not an issue. Tool functionality
- 09:38 AM Bug #25470 (Resolved): Master gage :-IF you Un check the Access right of "EQUIPMENT STATUS UPDATER" In Groups menu the Status text field in MASTER GAGE should be as black colour we cant change the status.
- 09:38 AM Bug #25469 (Resolved): Master GAGE:-[ "Gage defective , Risk of condition to product ,Corrective Action" text fields is not showing.
11/18/2022
- 11:56 AM Bug #25484 (Fixed in Dev): On initating CR from FST the form is getting closed automatically and the icon to open the cr form is not clickable
- 11:11 AM Bug #25484 (Open): On initating CR from FST the form is getting closed automatically and the icon to open the cr form is not clickable
- 11:11 AM Bug #25485 (Open): In New Concern, Once the part is selected and if the user tries to select an option in failure mode, it shows no data but once we save the concern and refresh then failure mode is loading.
- 11:11 AM Bug #25483 (Open): Project Competency Report not showing data
- 11:11 AM Bug #25482 (Open): Change password menu for Supplier user is missing
- 11:11 AM Bug #25481 (Open): Gabriel form is not working Properly
11/17/2022
- 05:50 PM Bug #25449 (Closed): IN Consolidated Findings report, The Data's are fetching wrongly.
- 05:50 PM Bug #25480 (Closed): In 8D form & 7D form, The data we enter in 5why's showing in main form (8D/7D) without check the checkbox(Last 5why will show in rootcause)
- 05:48 PM Bug #25480 (Resolved): In 8D form & 7D form, The data we enter in 5why's showing in main form (8D/7D) without check the checkbox(Last 5why will show in rootcause)
- can be addressed in Future release
- 05:47 PM Bug #25480 (Fixed in Dev): In 8D form & 7D form, The data we enter in 5why's showing in main form (8D/7D) without check the checkbox(Last 5why will show in rootcause)
- 09:29 AM Bug #25485 (Closed): In New Concern, Once the part is selected and if the user tries to select an option in failure mode, it shows no data but once we save the concern and refresh then failure mode is loading.
- In New Concern, Once the part is selected and if the user tries to select an option in failure mode, it shows no data...
- 09:14 AM Bug #25417 (Closed): Impact- Auditor done only verification but in corrective action page both verification & validation are showing
11/16/2022
- 04:12 PM Bug #25484 (Closed): On initating CR from FST the form is getting closed automatically and the icon to open the cr form is not clickable
- On initating CR from FST the form is getting closed automatically and the icon is not clickable
- 02:33 PM Bug #25483 (Closed): Project Competency Report not showing data
- While opening from Gantt page, Project competency report not showing any data, all skills are showing as NA
- 01:18 PM Bug #25482 (Closed): Change password menu for Supplier user is missing
- Change password menu for Supplier user is missing
- 01:06 PM Bug #25481 (Closed): Gabriel form is not working Properly
- Gabriel form is not working Properly
- 12:23 PM Bug #25480 (Open): In 8D form & 7D form, The data we enter in 5why's showing in main form (8D/7D) without check the checkbox(Last 5why will show in rootcause)
- 12:23 PM Bug #25479 (Open): Fish bone is not opening in Forms
- 12:23 PM Bug #25477 (Open): Block diagram – Element duplicating when the element is removed and again added in the Add/Remove Element from Item boundaries, Interface matrix, Interface function matrix, Combined interface matrix.
- 11:40 AM Bug #25380 (Fixed in Dev): 11.2.0 pending issues
- 11:13 AM Bug #25478 (Resolved): Reports- Default group is not showing for multisite projects in the filter
- 11:12 AM Bug #25478 (Fixed in Dev): Reports- Default group is not showing for multisite projects in the filter
- 11:07 AM Bug #25478 (Open): Reports- Default group is not showing for multisite projects in the filter
- 09:49 AM Bug #25463 (Resolved): Audits are not loading in the Perform Audit page.
- 09:46 AM Bug #25463 (Fixed in Dev): Audits are not loading in the Perform Audit page.
- 09:49 AM Bug #25460 (Resolved): Cannot able to Schedule PSA audit. Schedule Audit page is loading as empty page
- 09:49 AM Bug #25449 (Resolved): IN Consolidated Findings report, The Data's are fetching wrongly.
- 09:48 AM Bug #25449 (Fixed in Dev): IN Consolidated Findings report, The Data's are fetching wrongly.
- Reporting team checked with QA and informed me it cannot be able to replicate
- 09:49 AM Bug #25417 (Resolved): Impact- Auditor done only verification but in corrective action page both verification & validation are showing
- 09:48 AM Bug #25417 (Fixed in Dev): Impact- Auditor done only verification but in corrective action page both verification & validation are showing
- 09:49 AM Bug #25347 (Resolved): Impact - All report templates are not showing related to audit pro. when we preview the report in the same function.
- 09:49 AM Bug #25347 (Fixed in Dev): Impact - All report templates are not showing related to audit pro. when we preview the report in the same function.
11/15/2022
- 01:30 PM Bug #25480 (Closed): In 8D form & 7D form, The data we enter in 5why's showing in main form (8D/7D) without check the checkbox(Last 5why will show in rootcause)
- In 8D form & 7D form, The data we enter in 5why's showing in main form (8D/7D) without check the checkbox(Last 5why w...
- 09:28 AM Bug #25479 (Closed): Fish bone is not opening in Forms
- Fish bone is not opening in Forms
11/14/2022
- 07:25 PM Bug #25144 (Fixed in Dev): VOC – After the VOC is approved, the form is not displayed while trying to Initiate change request
- Team, there is no issue in this subject, as per CR team update we have to do some settings
- 07:18 PM Bug #25206 (Fixed in Dev): VOC – Duplicating one reviewer as a mandatory and nonmandatory reviewer, While stopping the review and again sending for a review.
- 05:49 PM Bug #25478 (Closed): Reports- Default group is not showing for multisite projects in the filter
- Multisite report filter is not showing default project group.
- 05:26 PM Bug #25298 (Closed): Label is missing in VOC page for Add characteristics in reqirement column.
- 05:25 PM Bug #25446 (Closed): Item boundary is not working.
- 02:31 PM Bug #25418 (Closed): In CA close out, when click show all button for Objective evidence - show all button not working when we giving space in between two paragraph
- 02:23 PM Bug #25477 (Closed): Block diagram – Element duplicating when the element is removed and again added in the Add/Remove Element from Item boundaries, Interface matrix, Interface function matrix, Combined interface matrix.
- Block diagram – Element duplicating when the element is removed and again added in the Add/Remove Element from Item b...
- 12:42 PM Bug #25402 (Closed): shop floor training details menu is not displaying correctly
- 12:05 PM Bug #25402 (Resolved): shop floor training details menu is not displaying correctly
- 12:41 PM Bug #25398 (Closed): Training name is showing wrong for some specific data entry
- 12:05 PM Bug #25398 (Resolved): Training name is showing wrong for some specific data entry
- 12:40 PM Bug #25399 (Closed): Employee details are not showing in Training Assigned
- 12:05 PM Bug #25399 (Resolved): Employee details are not showing in Training Assigned
- 12:38 PM Bug #25460 (Fixed in Dev): Cannot able to Schedule PSA audit. Schedule Audit page is loading as empty page
- 12:34 PM Bug #25445 (Fixed with Hotfix): add/remove element is not working in IFM and CIM
- 12:34 PM Bug #25445 (Fixed in Dev): add/remove element is not working in IFM and CIM
- 08:59 AM Bug #25474 (Open): Old Supplier Import excel file is available under 'Import Format' button. Need to embed the updated Import format file
- 07:02 AM Bug #25474 (Closed): Old Supplier Import excel file is available under 'Import Format' button. Need to embed the updated Import format file
- Old Supplier Import excel file is available under 'Import Format' button. Need to embed the updated Import format file
- 08:59 AM Bug #25473 (Open): Irrelevant menu,'Change Password' ,is available in Supplier management. And clicking on it, 'Supplier Audit Status' page is opening.
- 06:59 AM Bug #25473 (Closed): Irrelevant menu,'Change Password' ,is available in Supplier management. And clicking on it, 'Supplier Audit Status' page is opening.
- Irrelevant menu,'Change Password' ,is available in Supplier management. And clicking on it, 'Supplier Audit Status' p...
- 08:59 AM Bug #25472 (Open): In Supplier Login, Supplier Declaration and Statutory checklist displays the details of all suppliers.
- 08:59 AM Bug #25471 (Open): Supplier Login : Supplier Performance Monitoring report shows the details of all other suppliers
11/13/2022
- 06:16 PM Bug #25298 (Resolved): Label is missing in VOC page for Add characteristics in reqirement column.
11/11/2022
- 09:31 AM Bug #25472 (Closed): In Supplier Login, Supplier Declaration and Statutory checklist displays the details of all suppliers.
- In Supplier Login, Supplier Declaration and Statutory checklist displays the forms of all suppliers.
Onlt the forms ... - 09:26 AM Bug #25471 (Closed): Supplier Login : Supplier Performance Monitoring report shows the details of all other suppliers
- Supplier Login : Supplier Performance Monitoring report shows the details of all other suppliers.
Only the report of... - 06:23 AM Bug #25442 (Resolved): Block diagram-BOM and Add/remove element depends context elements.it will show same hierachie for add/remove element and bom.
- 03:48 AM Bug #25442 (Fixed with Hotfix): Block diagram-BOM and Add/remove element depends context elements.it will show same hierachie for add/remove element and bom.
- 03:48 AM Bug #25442 (Fixed in Dev): Block diagram-BOM and Add/remove element depends context elements.it will show same hierachie for add/remove element and bom.
- 06:21 AM Bug #25419 (Resolved): Add / Remove element duplication issues while adding and removing the element in Item boundaries, Interface function matrix, and Combined interface matrix.
- 03:52 AM Bug #25419 (Fixed with Hotfix): Add / Remove element duplication issues while adding and removing the element in Item boundaries, Interface function matrix, and Combined interface matrix.
- 03:52 AM Bug #25419 (Fixed in Dev): Add / Remove element duplication issues while adding and removing the element in Item boundaries, Interface function matrix, and Combined interface matrix.
- 06:20 AM Bug #25409 (Resolved): Unable to import PI in RFD and FST. Unable to create new PI in VDA.
- 06:13 AM Bug #25446 (Resolved): Item boundary is not working.
- 03:43 AM Bug #25446 (Fixed with Hotfix): Item boundary is not working.
- 03:42 AM Bug #25446 (Fixed in Dev): Item boundary is not working.
- 06:09 AM Bug #25445 (Not Fixed with Hotfix): add/remove element is not working in IFM and CIM
- After removing an element, it needs manual refresh. It is not automatically refreshing.
After adding an element, O... - 03:44 AM Bug #25445 (Fixed with Hotfix): add/remove element is not working in IFM and CIM
- 03:43 AM Bug #25445 (Fixed in Dev): add/remove element is not working in IFM and CIM
- 06:00 AM Bug #25410 (Resolved): VOC – After adding the failure in Design FMEA, all the rows and columns in VOC are collapsed
- 05:35 AM Bug #25418 (Resolved): In CA close out, when click show all button for Objective evidence - show all button not working when we giving space in between two paragraph
- 05:35 AM Bug #25418 (Fixed in Dev): In CA close out, when click show all button for Objective evidence - show all button not working when we giving space in between two paragraph
- 05:15 AM Bug #25450 (Fixed in Dev): Actions Menu - On selecting the Requirement(s) Reviewed tab, it is not highlighted. But page is loading properly after selection.(Refer Description)
- 04:34 AM Bug #25356 (Fixed with Hotfix): When user click on show/hide button it will hide half row from req id column.
- 04:06 AM Bug #25365 (Fixed in Dev): FMEDA-Functionality is not correct
11/10/2022
- 11:49 PM Bug #25099 (Closed): Emails are not generated in Batch manager for MG
- 11:42 PM Bug #25268 (Fixed in Dev): Risk Setup- Suggesting to include risk set up option inside CM module for Omnex Risk forms
- 09:28 PM Bug #25470 (Open): Master gage :-IF you Un check the Access right of "EQUIPMENT STATUS UPDATER" In Groups menu the Status text field in MASTER GAGE should be as black colour we cant change the status.
- 04:07 AM Bug #25470 (Closed): Master gage :-IF you Un check the Access right of "EQUIPMENT STATUS UPDATER" In Groups menu the Status text field in MASTER GAGE should be as black colour we cant change the status.
- 1.Un check the Access right of "EQUIPMENT STATUS UPDATER" In Groups menu the Status text field in MASTER GAGE shou...
- 09:28 PM Bug #25469 (Open): Master GAGE:-[ "Gage defective , Risk of condition to product ,Corrective Action" text fields is not showing.
- 03:23 AM Bug #25469 (Closed): Master GAGE:-[ "Gage defective , Risk of condition to product ,Corrective Action" text fields is not showing.
- 1.Master GAGE:-[ "Gage defective , Risk of condition to product ,Corrective Action" text fields is not showing.
- 09:28 PM Bug #25468 (Open): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the attached files are not getting saved.
- 01:15 AM Bug #25468 (Closed): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the attached files are not getting saved.
- In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the attached files are not getting ...
- 09:28 PM Bug #25466 (Open): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the Attach file option is still disabled, even if we select 'Yes'. Refer screenshot.
- 12:25 AM Bug #25466 (Closed): In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the Attach file option is still disabled, even if we select 'Yes'. Refer screenshot.
- In Supplier Evaluation Report (Under Supplier Declaration & Statutory checklist), the Attach file option is still dis...
- 09:28 PM Bug #25465 (Open): In Widgets page, multiple widgets are available under the same name'Dashboard'. Refer screenshot.
- 12:20 AM Bug #25465 (Closed): In Widgets page, multiple widgets are available under the same name'Dashboard'. Refer screenshot.
- In Widgets page, multiple widgets are available under the same name'Dashboard'. Refer screenshot.
- 09:28 PM Bug #25464 (Open): Label Issues : Typos in 'Onboarding' and 'Self Assessment' of Landing page. 'THLSupplierConcern' in Groups
- 09:28 PM Bug #25463 (Open): Audits are not loading in the Perform Audit page.
- 09:28 PM Bug #25462 (Open): The newly created suppliers are not getting mapped with the existing Audit Standards automatically.
- 09:28 PM Bug #25461 (Open): 'Force update Password' in Supplier User creation screen is checked by default for all Supplier users.
- 09:28 PM Bug #25460 (Open): Cannot able to Schedule PSA audit. Schedule Audit page is loading as empty page
- 09:28 PM Bug #25459 (Open): "Temporary Pseudocode while Onboarding suppliers" is not available in the Supplier Business rule
- 09:28 PM Bug #25458 (Open): 'Supplier Evaluation', 'Engagement Model', 'Supplier Audit Status', 'Change Password' menus are available under Supplier setup
- 09:28 PM Bug #25450 (Open): Actions Menu - On selecting the Requirement(s) Reviewed tab, it is not highlighted. But page is loading properly after selection.(Refer Description)
- 09:28 PM Bug #25449 (Open): IN Consolidated Findings report, The Data's are fetching wrongly.
- 09:28 PM Bug #25448 (Open): New menu showing inside APQP Project Setup with 404 Error
11/09/2022
- 05:07 AM Bug #25464 (Closed): Label Issues : Typos in 'Onboarding' and 'Self Assessment' of Landing page. 'THLSupplierConcern' in Groups
- Label Issues : Typos in 'Onboarding' and 'Self Assessment' of Landing page.
In Groups-> 'THLSupplierConcern' under... - 05:03 AM Bug #25463 (Closed): Audits are not loading in the Perform Audit page.
- Audits are not loading in the Perform Audit page.
- 05:01 AM Bug #25462 (Closed): The newly created suppliers are not getting mapped with the existing Audit Standards automatically.
- The newly created suppliers are not getting mapped with the existing Audit Standards automatically.
- 04:58 AM Bug #25461 (Closed): 'Force update Password' in Supplier User creation screen is checked by default for all Supplier users.
- 'Force update Password' in Supplier User creation screen is checked by default for all Supplier users.
It should be ... - 04:51 AM Bug #25460 (Closed): Cannot able to Schedule PSA audit. Schedule Audit page is loading as empty page
- Cannot able to Schedule PSA audit. Schedule Audit page is loading as empty page
- 04:49 AM Bug #25459 (Closed): "Temporary Pseudocode while Onboarding suppliers" is not available in the Supplier Business rule
- "Temporary Pseudocode while Onboarding suppliers" is not available in the Supplier Business rule
- 04:45 AM Bug #25458 (Closed): 'Supplier Evaluation', 'Engagement Model', 'Supplier Audit Status', 'Change Password' menus are available under Supplier setup
- Supplier Evaluation', 'Engagement Model', 'Supplier Audit Status', 'Change Password' menus are available under Suppli...
11/07/2022
- 07:57 AM Bug #25449 (Closed): IN Consolidated Findings report, The Data's are fetching wrongly.
- In Consolidated Findings report, For a selected audit, The NC/OFI are closed out, but in report, is still showing not...
11/06/2022
- 11:30 PM Bug #25450 (Closed): Actions Menu - On selecting the Requirement(s) Reviewed tab, it is not highlighted. But page is loading properly after selection.(Refer Description)
- Issue occurs for Requirement(s) Reviewed tab only.
Focus is still there on previously selected tab.
11/04/2022
- 07:28 PM Bug #25448 (Closed): New menu showing inside APQP Project Setup with 404 Error
- Showing new menu 'Resource Sheet' inside Project Setup menu in between Issue Setup and Risk Setup sub menus. When cli...
- 05:03 PM Bug #25446 (Open): Item boundary is not working.
- 04:05 PM Bug #25446 (Closed): Item boundary is not working.
- Item boundary is not working.
- 05:03 PM Bug #25445 (Open): add/remove element is not working in IFM and CIM
- 03:50 PM Bug #25445 (Closed): add/remove element is not working in IFM and CIM
- add/remove element is not working in IFM and CIM
- 05:03 PM Bug #25442 (Open): Block diagram-BOM and Add/remove element depends context elements.it will show same hierachie for add/remove element and bom.
- 03:36 PM Bug #25442 (Closed): Block diagram-BOM and Add/remove element depends context elements.it will show same hierachie for add/remove element and bom.
- Block diagram-BOM and Add/remove element depends context elements.it will show same hierachie for add/remove element ...
- 05:03 PM Bug #25424 (Open): Landing page- Showing dashboard widget multiple times in the landing page
- 05:03 PM Bug #25423 (Open): Block Diagram - External element is displayed inside the scope. There is no alert message or restriction for it.
- 05:03 PM Bug #25419 (Open): Add / Remove element duplication issues while adding and removing the element in Item boundaries, Interface function matrix, and Combined interface matrix.
- 05:03 PM Bug #25418 (Open): In CA close out, when click show all button for Objective evidence - show all button not working when we giving space in between two paragraph
- 05:03 PM Bug #25417 (Open): Impact- Auditor done only verification but in corrective action page both verification & validation are showing
- 05:03 PM Bug #25413 (Open): In Groups, Under Audit Administrator, "Supplier Audit Status" is available for twice.
- 05:03 PM Bug #25403 (Open): emails are not generating
- 05:03 PM Bug #25402 (Open): shop floor training details menu is not displaying correctly
- 05:03 PM Bug #25399 (Open): Employee details are not showing in Training Assigned
- 05:03 PM Bug #25398 (Open): Training name is showing wrong for some specific data entry
- 05:03 PM Bug #25391 (Open): UBM WORK ORDER:- Under pm supervisor calendar the scheduled "ubm" is not generating .
11/02/2022
- 05:18 PM Bug #25424 (Closed): Landing page- Showing dashboard widget multiple times in the landing page
- Landing page- Showing dashboard widget multiple times in the landing page
- 11:34 AM Bug #25047 (Yet to Verify): Language imported issue in the menu
- 11:33 AM Bug #25347 (Not Resolved): Impact - All report templates are not showing related to audit pro. when we preview the report in the same function.
11/01/2022
- 11:40 AM Bug #25359 (Fixed with Hotfix): Interface function matrix - The location of the label is not proper in IFM, and the duplication issue
- 11:40 AM Bug #25359 (Fixed in Dev): Interface function matrix - The location of the label is not proper in IFM, and the duplication issue
- 11:22 AM Bug #25382 (Fixed with Hotfix): (New Issue)FTA - While selecting multiple Failures for same element and flowing down, it shows flowdown for only one Failure. It is displaying properly in Failure tree.(Refer Description)
- 11:21 AM Bug #25382 (Fixed in Dev): (New Issue)FTA - While selecting multiple Failures for same element and flowing down, it shows flowdown for only one Failure. It is displaying properly in Failure tree.(Refer Description)
- 11:15 AM Bug #25302 (Fixed with Hotfix): After setting the element outscope after refresh the page, scope include the outer box inside it
- 11:15 AM Bug #25302 (Fixed in Dev): After setting the element outscope after refresh the page, scope include the outer box inside it
- 10:59 AM Bug #25423 (Closed): Block Diagram - External element is displayed inside the scope. There is no alert message or restriction for it.
- Block Diagram
1. External element is displayed inside the scope. There is no alert message or restriction for it.
...
10/31/2022
- 10:15 AM Bug #25356 (Fixed in Dev): When user click on show/hide button it will hide half row from req id column.
- 10:15 AM Bug #25356: When user click on show/hide button it will hide half row from req id column.
- show/hide button removed
- 09:35 AM Bug #25002 (Not Resolved): Cant able to save New Process
10/28/2022
- 09:34 PM Bug #25419 (Closed): Add / Remove element duplication issues while adding and removing the element in Item boundaries, Interface function matrix, and Combined interface matrix.
- Add/Remove element duplication issues while adding and removing the element in Item boundaries, Interface function ma...
- 06:07 AM Bug #25418 (Closed): In CA close out, when click show all button for Objective evidence - show all button not working when we giving space in between two paragraph
- In CA close out, when click show all button for Objective evidence - Show all button not working when we giving space...
- 05:58 AM Bug #25417 (Closed): Impact- Auditor done only verification but in corrective action page both verification & validation are showing
- Auditor done only verification but in corrective action page both verification & validation are showing.
10/27/2022
- 04:02 AM Bug #25413 (Closed): In Groups, Under Audit Administrator, "Supplier Audit Status" is available for twice.
- In Groups, Under Audit Administrator, "Supplier Audit Status" is available for twice. Please refer screenshot.
- 02:08 AM Bug #25302 (Not Resolved): After setting the element outscope after refresh the page, scope include the outer box inside it
- 02:03 AM Bug #25356 (Not Resolved): When user click on show/hide button it will hide half row from req id column.
- 12:28 AM Bug #25298 (Fixed with Hotfix): Label is missing in VOC page for Add characteristics in reqirement column.
- 12:28 AM Bug #25298 (Fixed in Dev): Label is missing in VOC page for Add characteristics in reqirement column.
- 12:23 AM Bug #25409 (Fixed with Hotfix): Unable to import PI in RFD and FST. Unable to create new PI in VDA.
- 12:22 AM Bug #25409 (Fixed in Dev): Unable to import PI in RFD and FST. Unable to create new PI in VDA.
- 12:22 AM Bug #25409 (Open): Unable to import PI in RFD and FST. Unable to create new PI in VDA.
- 12:21 AM Bug #25410 (Fixed with Hotfix): VOC – After adding the failure in Design FMEA, all the rows and columns in VOC are collapsed
- 12:21 AM Bug #25410 (Fixed in Dev): VOC – After adding the failure in Design FMEA, all the rows and columns in VOC are collapsed
- 12:21 AM Bug #25410 (Open): VOC – After adding the failure in Design FMEA, all the rows and columns in VOC are collapsed
Also available in: Atom