Activity
From 01/24/2020 to 02/22/2020
02/21/2020
- 12:43 PM Bug #15680 (Closed): VEM audit calender-Tentative event audit unable to confirm using update option as on clicking audit the details not getting loaded
- VEM audit calender-Tentative event audit unable to confirm using update option as on clicking audit the details not g...
- 12:31 PM Bug #15679 (Closed): There is no alert to notify map segment has not mapped to audit program.During VEM audit schedule "Schedule created" alert has displayed but no audit generated because of not mapping segment
- There is no alert to notify map segment has not mapped to audit program.During VEM audit schedule "Schedule created" ...
- 10:18 AM Bug #15678 (Closed): Supplier Report:Report shows only commodity audits not showing audit done for parts mapped to those commodity
- Supplier Report:Report shows only commodity audits not showing audit done for parts mapped to those commodity
02/20/2020
- 04:47 PM Bug #15677 (Closed): Supplier Report:SQIE not listing auditor name specific to audit instead it shows all SQI assigned for the supplier
- Supplier Report:SQIE not listing auditor name specific to audit instead it shows all SQI assigned for the supplier
02/18/2020
- 07:56 PM Bug #15671: VAM-corrective action close out-unable to import error alert is displaying
- WAD. PFA
- 07:01 PM Bug #15671 (Open): VAM-corrective action close out-unable to import error alert is displaying
- VAM-corrective action close out-unable to import error alert is displaying
- 07:45 PM Bug #15669: while importng checklists and if have session issue imported checklists reflected in auditpro not in supplier portal
- Cannot able to replicate again by QA
- 06:59 PM Bug #15669 (Open): while importng checklists and if have session issue imported checklists reflected in auditpro not in supplier portal
- while importng checklists and if have session issue imported checklists reflected in auditpro not in supplier portal
- 07:19 PM Bug #15665 (Resolved): Audit scheduled from corporate for different site not listing in corresponding site perform audit page
- 07:19 PM Bug #15665 (Open): Audit scheduled from corporate for different site not listing in corresponding site perform audit page
- Wrong Scenario. Not an issue
- 06:59 PM Bug #15670 (Resolved): Unable to export VAM publish report in firefox
- Unable to export VAM publish report in firefox
- 06:57 PM Bug #15668 (Resolved): No option to create sub business unit in Business Unit master screen
- No option to create sub business unit in Business Unit master screen
02/17/2020
- 03:58 PM Bug #15666 (Resolved): Unable to delete schedule audit from update/delete schedule audit page
- 03:58 PM Bug #15666 (Open): Unable to delete schedule audit from update/delete schedule audit page
- Cannot Able To replicate
- 02:54 PM Bug #15666 (Closed): Unable to delete schedule audit from update/delete schedule audit page
- Unable to delete schedule audit from update/delete schedule audit page
- 02:46 PM Bug #15665 (Closed): Audit scheduled from corporate for different site not listing in corresponding site perform audit page
- Audit scheduled from corporate for different site not listing in corresponding site perform audit page
- 01:08 PM Bug #15664 (Resolved): View supply chain button is available for a supplier created from suite have no add part option
- View supply chain button is available for a supplier created from suite have no add part option
- 01:05 PM Bug #15663 (Open): Creating supplier form Suite but without adding part option(no risks has selected),still Add/View doc option available.No need these if no option for add parts
- Creating supplier form Suite but without adding part option(no risks has selected),still Add/View doc option availabl...
- 12:29 PM Bug #15662 (Resolved): Unable to create supplier from Suite
- Unable to create supplier from Suite
- 12:18 PM Bug #15661 (Open): Part number missing in view doc page if part tree loaded by PARTS
- Part number missing in view doc page if part tree loaded by PARTS
- 12:16 PM Bug #15660 (Open): If same part name/number for two plants then it shows multiple times in document type master page.Refer screen shot
- If same part name/number for two plants then it shows multiple times in document type master page
- 12:15 PM Bug #15659 (Open): Duplicate plant name displaying in document type master(forms and checklists doesn't have documents added).Refer screen shot
- Duplicate plant name displaying in document type master(forms and checklists doesn't have documents added)
- 12:13 PM Bug #15658 (Open): Doc type master-Attach from local-file status shows as error(xl file)
- Doc type master-Attach from local-file status shows as error(xl file)
02/14/2020
- 04:52 PM Bug #15656 (Closed): Reports-Adherence Report-VEM audit-If an audit has updated with new date then it is not showing in the report
- Reports-Adherence Report-VEM audit-If an audit has updated with new date then it is not showing in the report
- 04:35 PM Bug #15655 (Closed): Reports-Adherence Report-VEM audit-If an audit contains two commodities then only one commodity is alone showing in report
- Reports-Adherence Report-VEM audit-If an audt contains two commodities then only one commodity is alone showing in re...
02/11/2020
- 07:26 PM Bug #15467 (Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance
- As of now we don't have any option to handle in build. It's need to be done by Suite team.
need to discuss with bi...
02/10/2020
- 01:04 PM Bug #15467 (Not Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance
- Manual Insert is OK. But need to handled in build without any manual work.
02/07/2020
- 05:32 PM Bug #15356 (Closed): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.
- 05:32 PM Bug #15356: Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.
- Verified
- 05:32 PM Bug #15429 (Closed): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- Closed
- 11:58 AM Bug #15241 (Not Resolved): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- 11:58 AM Bug #15241: Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- Still the issue occur
- 11:51 AM Bug #15640 (Closed): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot
- Verified
- 09:44 AM Bug #15643 (Open): Actions Menu: For the Created Single Action in DFMEA its displaying Multiple Actions in the same name in Actions Menu
02/06/2020
- 05:53 PM Bug #15641 (Closed): My Dashboard issue: Please refer the description.
- 05:11 PM Bug #15359 (Closed): Multi site: Email->Email link is not redirecting to correct location
- 05:10 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location
- Verified by sara.Closing this issue
- 05:06 PM Bug #15359 (Resolved): Multi site: Email->Email link is not redirecting to correct location
- 11:32 AM Bug #15643 (Open): Actions Menu: For the Created Single Action in DFMEA its displaying Multiple Actions in the same name in Actions Menu
- In the DFMEA if the User creating a Single Action and by viewing it in Actions Menu its displaying as Multiple Action...
02/05/2020
- 05:59 PM Bug #15397 (Closed): Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed
- Verified in CY-9 and Closed
- 03:51 PM Bug #15523 (Closed): ITAR document is going to NON ITAR Approver. PFB the scenario
- 03:39 PM Bug #15630 (Reopen): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
02/04/2020
- 05:44 PM Bug #15642 (Closed): Date gets reduced to the previous day during publishing—Check by changing the time zone
- HTTPS: Date gets reduced to the previous day during publishing—Check by changing the time zone
- 02:57 PM Bug #15241 (Resolved): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- 02:48 PM Bug #15630 (Closed): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
- Couldnt replicate this, so closing the issue
- 02:33 PM Bug #15472 (Closed): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 01:28 PM Bug #15483 (Closed): HTTPS: Admin actions: Pending doc drafts shows the wrong count in LHS
- closed in cy 8
- 01:27 PM Bug #15603 (Closed): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.
- Closed in cy 8
- 01:27 PM Bug #15603 (Fixed with Hotfix): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.
- 12:55 PM Bug #15602 (Closed): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- After Discussion with Biju and Rangaraj -> Close icon is removed for all the widgets across modules and Verified Expa...
- 12:43 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 12:43 PM Bug #15397 (Resolved): Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed
- 11:21 AM Bug #15640 (Resolved): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot
02/03/2020
- 05:51 PM Bug #15630: New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
- Will check in next build and update
- 04:46 PM Bug #15630 (Resolved): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
- Not able to replicate
- 05:50 PM Bug #15523: ITAR document is going to NON ITAR Approver. PFB the scenario
- Will check in next build and update
- 04:45 PM Bug #15523 (Resolved): ITAR document is going to NON ITAR Approver. PFB the scenario
- Not able to replicate
- 02:20 PM Bug #15359 (Not Resolved): Multi site: Email->Email link is not redirecting to correct location
- 02:20 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location
- Email is not generating for multi-site
- 01:51 PM Bug #15633 (Closed): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- 10:02 AM Bug #15633 (Resolved): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- 01:50 PM Bug #15591 (Closed): Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inherited for checklists 'parent has score' alert keep on displaying
- Closing this issue and we could not able to reproduce it
- 01:49 PM Bug #15639 (Closed): Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not showing properly
- Closing this issue and we could not able to reproduce it
- 01:48 PM Bug #15639 (Open): Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not showing properly
- 01:48 PM Bug #15641 (Open): My Dashboard issue: Please refer the description.
- 12:45 PM Bug #15641 (Closed): My Dashboard issue: Please refer the description.
- 1)When Clicking on dashboard redirect arrow : No Response.
2)Click on the Whitespace, Now the arrow gets disappears. - 01:48 PM Bug #15640 (Open): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot
- 01:10 PM Bug #15390 (Closed): Report -> Audit Repeat NC -> Various finding status is missing
- 12:59 PM Bug #15451 (Closed): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- 12:41 PM Bug #15451 (Not Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- Not working as expected on any time period.
- 12:50 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 12:39 PM Bug #15581 (Closed): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message
- Verified in SP_925 CY-7 Build and Closed
- 12:35 PM Suggestion #15564 (Closed): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- As discussed with Pradeepa, Add ASIL option for parent element can be displayed and REQT ASIl can also be changed. So...
- 12:32 PM Suggestion #15564 (Resolved): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- 10:26 AM Bug #15422 (Closed): Report -> Auditor Utilization -> Wrong Count is displayed for an auditor utilized hrs
- As discussed with biju and bijoy on 30-01-20202 , the report is not included in the build - SP925 Final cycle (8)
- 10:25 AM Bug #15626 (Closed): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
- As discussed with biju and bijoy on 30-01-20202 , the report is not included in the build - SP925 Final cycle (8)
- 10:25 AM Bug #15627 (Closed): Auditor Utilization -> Utilization type is not working as expected
- As discussed with biju and bijoy on 30-01-20202 , the report is not included in the build - SP925 Final cycle (8)
- 09:53 AM Bug #15479 (Closed): Project/ Program Unarchive is not working.
- 09:47 AM Bug #15479: Project/ Program Unarchive is not working.
- Issue fixed in Cy-7
- 09:52 AM Bug #15406: TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
- Need to discuss with Madhu
- 09:51 AM Bug #15406 (TBD): TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
- 09:51 AM Bug #15406 (Open): TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
01/31/2020
- 05:27 PM Bug #15523 (Reopen): ITAR document is going to NON ITAR Approver. PFB the scenario
- 1.After publishing the doc pro , In Doc management the Approval route displays Module auto approval but it still foll...
- 04:55 PM Bug #15625 (Closed): Sporadic issue:data could not save alert on clicking save button in supplier contact page
- Closing this defect as it is sporadic issue
- 04:49 PM Bug #15608 (Closed): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even
- Part tree page load - 40 sec
Expanding the tree to show complete part details - 3m 12 sec
Hence closing this issue - 01:20 PM Bug #15608 (Resolved): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even
- 04:43 PM Bug #15520 (Closed): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 04:43 PM Bug #15617 (Closed): VOC: When doing only function flow-down in VOC, it displays wrong indicator
- 04:43 PM Bug #15618 (Closed): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- 04:43 PM Bug #15619 (Closed): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
- 04:32 PM Bug #15631 (Closed): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- 11:35 AM Bug #15631 (Resolved): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- 10:36 AM Bug #15631 (Open): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- 04:32 PM Bug #15616 (Closed): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 10:14 AM Bug #15616 (Resolved): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 03:18 PM Bug #15585 (TBD): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 03:17 PM Bug #15585 (Open): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 02:05 PM Bug #15635 (Closed): New cummins vam report-alert for part number is missing
- Working fine in cy8
- 01:20 PM Bug #15635 (Resolved): New cummins vam report-alert for part number is missing
- 10:36 AM Bug #15635 (Open): New cummins vam report-alert for part number is missing
- 02:05 PM Bug #15634 (Closed): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type)
- Working fine in cy8
- 01:20 PM Bug #15634 (Resolved): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type)
- 10:36 AM Bug #15634 (Open): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type)
- 02:04 PM Bug #15636 (Closed): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts
- Working fine in cy8
- 01:20 PM Bug #15636 (Resolved): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts
- 10:36 AM Bug #15636 (Open): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts
- 01:18 PM Bug #15632 (Closed): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- not an issue
- 01:18 PM Bug #15632 (Fixed with Hotfix): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- 10:36 AM Bug #15632 (Open): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- 01:16 PM Bug #15640 (Closed): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot
- Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue3.Refer screen shot
- 01:15 PM Bug #15639 (Closed): Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not showing properly
- Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not...
- 12:05 PM Bug #15613 (Closed): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- 10:36 AM Bug #15633 (Open): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- 10:36 AM Bug #15630 (Open): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
01/30/2020
- 06:13 PM Bug #15623 (Closed): In Concerns part selection pop up, search option is not working.
- 06:07 PM Bug #15623 (Resolved): In Concerns part selection pop up, search option is not working.
- Not Replicated Checked with QA
- 06:05 PM Bug #15636 (Closed): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts
- Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed...
- 05:59 PM Bug #15621 (Closed): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- Working fine in c7
- 05:52 PM Bug #15550 (Closed): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- Working fine in c7
- 05:51 PM Bug #15610 (Closed): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also
- Working fine in c7
- 05:51 PM Bug #15612 (Closed): Social Media-VAM audit is listing in supplier contact social media page
- Working fine in c7
- 05:51 PM Bug #15537 (Closed): Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- Verified in Cy-7 build and closed
- 05:51 PM Bug #15628 (Closed): No email for scheduling VAM audit
- Working fine in c7
- 05:51 PM Bug #15526 (Closed): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- Working fine in c7
- 11:29 AM Bug #15526 (Fixed with Hotfix): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- verified as hot fix and working gine
- 05:50 PM Bug #15607 (Closed): Risk Master-Deleted entity from suite listing in riskmaster menu
- Working fine in c7
- 05:50 PM Bug #15595 (Closed): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- working fine.issue has part number field is missing raised as new issue in cy7
- 05:48 PM Bug #15635 (Closed): New cummins vam report-alert for part number is missing
- New cummins vam report-alert for part number is missing
- 05:47 PM Bug #15634 (Closed): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type)
- Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it import...
- 05:45 PM Bug #15633 (Closed): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- 05:43 PM Bug #15632 (Closed): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- 05:40 PM Bug #15241 (Reopen): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- Issue reproducible in cy6 hence reopening the issue from cy1
- 05:36 PM Bug #15631 (Closed): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- 05:30 PM Bug #15627 (Resolved): Auditor Utilization -> Utilization type is not working as expected
- 05:28 PM Bug #15627 (Not Resolved): Auditor Utilization -> Utilization type is not working as expected
- 11:20 AM Bug #15627 (Resolved): Auditor Utilization -> Utilization type is not working as expected
- 11:20 AM Bug #15627 (Open): Auditor Utilization -> Utilization type is not working as expected
- 04:48 PM Bug #15606 (Closed): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- 09:52 AM Bug #15606 (Fixed with Hotfix): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- 04:32 PM Bug #15630 (Closed): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
- New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to repli...
- 03:29 PM Bug #15601 (Closed): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .
- 03:29 PM Bug #15601 (Fixed with Hotfix): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .
- 03:25 PM Bug #15616 (Not Resolved): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 03:00 PM Bug #15622 (Closed): Holiday List creating with Special character in Additional holidays Specification displays Error
- Verified in CY-7 Build and Closed
- 12:49 AM Bug #15622 (Resolved): Holiday List creating with Special character in Additional holidays Specification displays Error
- 02:53 PM Bug #15620 (Closed): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document
- 02:48 PM Bug #15605 (Closed): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder
- 02:45 PM Bug #15604 (Closed): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.
- 12:49 AM Bug #15604 (Resolved): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.
- 12:13 PM Bug #15618 (Fixed with Hotfix): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- 11:20 AM Bug #15626 (Resolved): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
- 11:20 AM Bug #15626 (Open): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
01/29/2020
- 10:33 PM Bug #15451 (Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- 02:57 PM Bug #15451 (Not Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- Scenario #1 Time period: Weekly or monthly : There is some data available. But system is showing no data available.
- 10:33 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 04:21 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 09:57 PM Bug #15605 (Resolved): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder
- 04:02 PM Bug #15605 (Open): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder
- 09:56 PM Bug #15616 (Resolved): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 04:02 PM Bug #15616 (Open): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 12:48 PM Bug #15616 (Closed): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- Multi site: When activate the folder in other site, shows double in folder management and document management
- 09:36 PM Bug #15620 (Resolved): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document
- 04:02 PM Bug #15620 (Open): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document
- 01:12 PM Bug #15620 (Closed): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document
- Document Info link: Doc URL is not displayed for NON ITAR document
- 08:08 PM Bug #15520 (Resolved): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 07:15 PM Bug #15619 (Resolved): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
- 04:02 PM Bug #15619 (Open): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
- 12:57 PM Bug #15619 (Closed): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
- Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
Refer Screenshot - 07:02 PM Bug #15550 (Resolved): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- 02:09 PM Bug #15550 (Not Fixed with Hotfix): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- verified that still view projects rights is showing.refer screen shot
- 07:02 PM Bug #15625 (Resolved): Sporadic issue:data could not save alert on clicking save button in supplier contact page
- 04:02 PM Bug #15625 (Open): Sporadic issue:data could not save alert on clicking save button in supplier contact page
- 03:48 PM Bug #15625 (Closed): Sporadic issue:data could not save alert on clicking save button in supplier contact page
- Sporadic issue:data could not save alert on clicking save button in supplier contact page
- 07:02 PM Bug #15610 (Resolved): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also
- 04:02 PM Bug #15610 (Open): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also
- 07:01 PM Bug #15526 (Resolved): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- 03:47 PM Bug #15526 (Not Resolved): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- unable to verify this issue as not able to import the same sheet (SQE,SQM alone specified) second time ,page keep on ...
- 06:19 PM Bug #15628 (Resolved): No email for scheduling VAM audit
- 06:19 PM Bug #15628 (Open): No email for scheduling VAM audit
- 05:20 PM Bug #15628 (Closed): No email for scheduling VAM audit
- No email for scheduling VAM audit
- 06:12 PM Bug #15418 (Closed): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 04:12 PM Bug #15418 (Not Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 05:55 PM Bug #15479: Project/ Program Unarchive is not working.
- Issue Closed and Verified
- 05:48 PM Bug #15613 (Fixed with Hotfix): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- 03:55 PM Bug #15613 (Resolved): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- 03:55 PM Bug #15613 (Open): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- 11:39 AM Bug #15613 (Closed): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also
- 05:39 PM Bug #15617 (Resolved): VOC: When doing only function flow-down in VOC, it displays wrong indicator
- 03:02 PM Bug #15617 (Open): VOC: When doing only function flow-down in VOC, it displays wrong indicator
- 12:49 PM Bug #15617 (Closed): VOC: When doing only function flow-down in VOC, it displays wrong indicator
- VOC: When doing only function flow-down in VOC, it displays red indicator instead of Yellow color
Refer Screenshot - 05:26 PM Bug #15607 (Fixed with Hotfix): Risk Master-Deleted entity from suite listing in riskmaster menu
- Verified as hot fix and working fine in cy6
- 04:22 PM Bug #15607 (Resolved): Risk Master-Deleted entity from suite listing in riskmaster menu
- 04:02 PM Bug #15607 (Open): Risk Master-Deleted entity from suite listing in riskmaster menu
- 05:24 PM Bug #15595 (Fixed with Hotfix): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Verified as hot fix and working fine in cy6
- 03:30 PM Bug #15595 (Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- 01:54 PM Bug #15595 (Not Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Verified that ISO/TS REG field has no alert,
standard on approval and signed packaging agreement has same alert... - 05:19 PM Bug #15390 (Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 04:21 PM Bug #15390 (Not Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 05:01 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- As discussed with Sabu, we can educate customer to set route
- 04:58 PM Bug #15547 (Closed): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 04:41 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- Now its not showing error, but the document gets published
- 04:27 PM Bug #15627 (Closed): Auditor Utilization -> Utilization type is not working as expected
- Auditor Utilization -> Utilization type is not working as expected . the report showing only specific datas. 2019 and...
- 04:26 PM Bug #15626 (Closed): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
- Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
- 04:24 PM Bug #15420 (Closed): Report - Auditor Utilization -> Type -> Utilized and Not Utilized data's are same
- 04:22 PM Bug #15621 (Resolved): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- 04:02 PM Bug #15621 (Open): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- 02:30 PM Bug #15621 (Closed): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- 04:21 PM Bug #15436 (Closed): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 04:11 PM Bug #15464 (Closed): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- 04:02 PM Bug #15623 (Open): In Concerns part selection pop up, search option is not working.
- 02:59 PM Bug #15623 (Closed): In Concerns part selection pop up, search option is not working.
- In Concerns part selection pop up, search option is not working. After selecting in manually the failure modes are no...
- 04:02 PM Bug #15622 (Open): Holiday List creating with Special character in Additional holidays Specification displays Error
- 02:50 PM Bug #15622 (Closed): Holiday List creating with Special character in Additional holidays Specification displays Error
- Holiday List creating with Special character in Additional holidays Specification displays Error
- 04:02 PM Bug #15608 (Open): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even
- 04:02 PM Bug #15604 (Open): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.
- 04:02 PM Bug #15603 (Open): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.
- 04:02 PM Bug #15601 (Open): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .
- 03:56 PM Bug #15618 (Resolved): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- 03:55 PM Bug #15618 (Open): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- 12:52 PM Bug #15618 (Closed): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
Refer Screenshot - 03:52 PM Bug #15433 (Closed): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- verified and working fine
- 03:29 PM Bug #15406: TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
- Need to discuss with Sabu and Bijoy
- 03:29 PM Bug #15585: TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- Need to discuss with Sabu and Bijoy
- 03:11 PM Bug #15544 (Closed): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- verified and working fine in cy6
- 02:59 PM Bug #15446 (Closed): BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel
- verified and working fine in cy6
- 02:58 PM Bug #15265 (Closed): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- verified and working fine in cy6
- 02:53 PM Bug #15423 (Closed): Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- 02:52 PM Bug #15562 (Closed): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized"
- 02:51 PM Bug #15538 (Closed): Email validation is not done during Supplier creation
- [email protected]
- 02:51 PM Bug #15551 (Closed): Need commodity,system and Subsystem field to be listed in the part details screen.
- verified and working fine in cy6
- 02:50 PM Bug #15552 (Closed): On mouse hovering the production item, parent name is showing as "null".
- verified and working fine in cy6
- 02:45 PM Bug #15405 (Closed): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- Verified and working fine in cy6
- 02:43 PM Bug #15602 (Not Resolved): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- In All the widgets Close icon is missing and in My dashboard expand and collapse option is not working.
- 02:32 PM Bug #15447 (Closed): Supplier-> New supplier-> View log-> Login as new user it has show the only the current history status not previous history some other user (supplier)
- verified that restrict with an alert 'no data found'
- 02:29 PM Bug #15272 (Closed): While Changing the Process from In Active to Active or From Active to In Active Displays alert as "Duplicate process"
- Issue verified in SP_925 CY-6 and Closed
- 02:25 PM Bug #15612 (Resolved): Social Media-VAM audit is listing in supplier contact social media page
- 02:24 PM Bug #15612 (Open): Social Media-VAM audit is listing in supplier contact social media page
- 02:22 PM Bug #15252 (Closed): Non ITAR users are listing while providing Access to Suite,Site and Module
- Verified in SP_925 Cy-6 and Closed
- 02:20 PM Bug #15277 (Closed): While Changing From Non ITAR instance to ITAR Instance system does not display Valid validation
- Issue verified in SP_925 Cy-6 and Closed
- 02:10 PM Bug #15459 (Closed): Effectiveness -> When Verified is no, below validation and effectiveness should be disable
- verified and working fine in cy6
- 02:10 PM Bug #15534 (Closed): Multi site: Supplier is not listing.Showstopper for multi site.
- verified and working fine in cy6
- 02:08 PM Bug #15536 (Closed): Multi site: Risk level is not able to set because popup is missing
- verified and working fine in cy6
- 02:07 PM Bug #15548 (Closed): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- verified and working fine in cy6
- 02:01 PM Bug #15587 (Closed): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- verified and working fine
- 01:55 PM Bug #15593 (Closed): Copying any value in new cummins report it takes some space in front
- Verified as per dev comments and working fine
- 01:54 PM Bug #15611 (Closed): IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- Verified and working fine
- 01:33 PM Bug #15606 (Resolved): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- Fixed and patches provided for testing
- 01:26 PM Bug #15606 (Open): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- 12:56 PM Bug #15586 (Closed): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- Verified and working fine in cy6
- 12:55 PM Bug #15598 (Closed): Report --> gage due report is not showing in the report tab
- 12:18 PM Bug #15511 (Closed): Batch Download: When the ITAR document is downloaded by ITAR user, then the NON ITAR module admin can view the ITAR documents in downloadable form. Same for stitch document
- 10:48 AM Bug #15566 (Closed): Created a Escalation Route with special character given in the description field. in the listing it is showing as route name , description and site value incorrectly. Not able to open the route also for editing.
- Issue verified in SP_925 CY-6 and Closed
- 10:36 AM Bug #15579 (Closed): Suite : Supplier is not getting created even after filling all the mandatory fields.
- Verified in Sp_925 Cy-6 Build and Closed
- 09:59 AM Bug #15579 (Resolved): Suite : Supplier is not getting created even after filling all the mandatory fields.
01/28/2020
- 07:52 PM Bug #15593 (Resolved): Copying any value in new cummins report it takes some space in front
- Before Copying Anything. First Copy in notepad and Verify any space are there or not. If manually entered value doesn...
- 06:37 PM Bug #15593 (Not Fixed with Hotfix): Copying any value in new cummins report it takes some space in front
- Issue reproduciable in IE.find screen shot
- 07:50 PM Bug #15611 (Resolved): IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- 07:48 PM Bug #15611 (Open): IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- Can able replicate in IE. And the Same issue was reported in Comments of Bug #15595
- 06:47 PM Bug #15611 (Closed): IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- 07:50 PM Bug #15595 (Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Cannot Able to Replicate. -> Done With Few Fields
few fields not specified then report-> Kindly Mention in Screen ... - 06:37 PM Bug #15595 (Not Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Veriried issue as New cummins report-few fields not specified then report is unable to submit in IE browser
- 06:57 PM Bug #15443 (Closed): Report Issues : Please refer the description
- 06:55 PM Bug #15443 (Resolved): Report Issues : Please refer the description
- 06:57 PM Bug #15558 (Closed): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 06:55 PM Bug #15558 (Resolved): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 06:51 PM Bug #15599 (Closed): Multi-Site : Created departments are not listing in Operator menu
- 06:51 PM Bug #15600 (Closed): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- 06:50 PM Bug #15612 (Closed): Social Media-VAM audit is listing in supplier contact social media page
- Social Media-VAM audit is listing in supplier contact social media page
- 06:47 PM Bug #15610 (Closed): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also
- Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scr...
- 06:44 PM Bug #15608 (Closed): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even
- Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the ...
- 06:43 PM Bug #15607 (Closed): Risk Master-Deleted entity from suite listing in riskmaster menu
- Risk Master-Deleted entity from suite listing in riskmaster menu
- 06:42 PM Bug #15589 (Closed): Unable to add parts selected from part tree loaded as 'system'
- Verified and working fine in cy6
- 06:42 PM Bug #15594 (Closed): Label issue in new cummins report for THLcolor code
- Verified and working fine in cy6
- 06:42 PM Bug #15493 (Closed): Legend status not showing in https site
- Verified and working fine in cy6
- 06:41 PM Bug #15525 (Closed): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- Verified and working fine in cy6
- 06:41 PM Bug #15529 (Closed): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- Verified and working fine in cy6
- 06:41 PM Bug #15531 (Closed): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- Verified and working fine in cy6
- 06:40 PM Bug #15542 (Closed): New Cummins VAM Report->Audit Status->New report is not displayed in audit status .pls find screen shot
- Verified and working fine in cy6
- 06:40 PM Bug #15571 (Closed): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- Verified and working fine in cy6
- 06:39 PM Bug #15574 (Closed): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- Verified and working fine in cy6
- 06:39 PM Bug #15588 (Closed): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity
- Verified and working fine in cy6
- 06:38 PM Bug #15592 (Closed): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- Verified and working fine in cy6
- 06:36 PM Bug #15596 (Closed): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- Verified and working fine in CY6
- 06:28 PM Bug #15354 (Closed): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 06:27 PM Bug #15540 (Closed): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 06:00 PM Bug #15606 (Closed): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- In the Main Menu, Non-ITAR Users can able to access the ITAR PI Documents, When the Non-ITAR User directly click the ...
- 05:41 PM Bug #15597 (Closed): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator
- 05:03 PM Bug #15605 (Closed): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder
- New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select posit...
- 04:51 PM Bug #15394 (Closed): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- Closed in SP925 Cycle 6
- 03:52 PM Bug #15604 (Closed): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.
- In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory ...
- 03:41 PM Bug #15602 (Resolved): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- 03:40 PM Bug #15602 (Open): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- 03:38 PM Bug #15580 (Closed): Suite : When Assigning module access for the first time the Drop down is not displaying fully
- Verified in Cy-6 Build and closed
- 03:36 PM Bug #15580 (Resolved): Suite : When Assigning module access for the first time the Drop down is not displaying fully
- 03:34 PM Bug #15409 (Closed): About EWQIMS is not displaying Fully when clicked.
- Verified in Cy-6 build and closed
- 03:30 PM Bug #15603 (Closed): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.
- Social Media: On viewing document and closing the popup screen the screen getting collapsed.
Note : On closing an...
01/27/2020
- 09:01 PM Bug #15562 (Resolved): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized"
- 09:01 PM Bug #15420 (Resolved): Report - Auditor Utilization -> Type -> Utilized and Not Utilized data's are same
- 08:18 PM Bug #15558 (Not Fixed with Hotfix): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 08:01 PM Bug #15600 (Fixed with Hotfix): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- 05:52 PM Bug #15600 (Resolved): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- 11:20 AM Bug #15600 (Open): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- 07:53 PM Bug #15585 (Resolved): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 1.Need to add reporting subbusinessunit-not completed
2.Need to add multiple BU,SBU,RBU,RSBU- Completed - 11:20 AM Bug #15585 (Open): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 06:36 PM Bug #15356 (Yet to Verify): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.
- Need to verify in new build
- 06:36 PM Bug #15583 (Closed): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment
- Attachment only displayed in View report
- 03:52 PM Bug #15583 (Resolved): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment
- 11:20 AM Bug #15583 (Open): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment
- 06:27 PM Bug #15582 (Closed): Re upload Extension request is not working
- Verified in cycle 5
- 12:55 PM Bug #15582 (Resolved): Re upload Extension request is not working
- 11:20 AM Bug #15582 (Open): Re upload Extension request is not working
- 06:22 PM Bug #15540 (Resolved): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 06:14 PM Bug #15599 (Fixed with Hotfix): Multi-Site : Created departments are not listing in Operator menu
- 05:53 PM Bug #15599 (Resolved): Multi-Site : Created departments are not listing in Operator menu
- 12:23 PM Bug #15599 (In Progress): Multi-Site : Created departments are not listing in Operator menu
- 11:20 AM Bug #15599 (Open): Multi-Site : Created departments are not listing in Operator menu
- 06:03 PM Bug #15569 (Closed): Tooptip should be proper while hovering he icon
- 06:03 PM Bug #15569: Tooptip should be proper while hovering he icon
- verified in cycle 4
- 02:18 PM Bug #15569 (Resolved): Tooptip should be proper while hovering he icon
- 05:59 PM Bug #15342 (Closed): Uppercase and lower case should be proper throughout site
- Verified
- 05:53 PM Bug #15391 (Closed): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- Verified in cycle5
- 05:53 PM Bug #15468 (Closed): Audit Program -> Server error displayed when clicking on "delete" button
- 05:52 PM Bug #15468: Audit Program -> Server error displayed when clicking on "delete" button
- Verified in cycle 5
- 05:24 PM Bug #15598 (Fixed with Hotfix): Report --> gage due report is not showing in the report tab
- 03:23 PM Bug #15598 (Resolved): Report --> gage due report is not showing in the report tab
- 11:20 AM Bug #15598 (Open): Report --> gage due report is not showing in the report tab
- 05:05 PM Bug #15586 (Resolved): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- 11:20 AM Bug #15586 (Open): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- 04:44 PM Bug #15587 (Resolved): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- 11:20 AM Bug #15587 (Open): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- 04:18 PM Bug #15354 (Resolved): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 03:20 PM Bug #15501 (Closed): Report--> Gage study due report only need to display for husco.
- 03:20 PM Bug #15501 (Fixed with Hotfix): Report--> Gage study due report only need to display for husco.
- Need to display in main stream - Baskar comment
- 03:17 PM Bug #15581 (Resolved): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message
- 11:20 AM Bug #15581 (Open): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message
- 02:49 PM Bug #15592 (Resolved): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- Need to verify after Hotfix
- 11:20 AM Bug #15592 (Open): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- 02:48 PM Bug #15594 (Resolved): Label issue in new cummins report for THLcolor code
- Need to verify after Hotfix
- 11:20 AM Bug #15594 (Open): Label issue in new cummins report for THLcolor code
- 02:48 PM Bug #15595 (Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Need to verify after Hotfix
- 11:20 AM Bug #15595 (Open): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- 02:48 PM Bug #15571 (Resolved): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- 02:31 PM Bug #15590 (Closed): Subsystem option is not listing in Part tree loaded by in add part screen
- As per Dev comments closing this defect
- 01:18 PM Bug #15590 (Resolved): Subsystem option is not listing in Part tree loaded by in add part screen
- 01:18 PM Bug #15590: Subsystem option is not listing in Part tree loaded by in add part screen
- as per sabu discussion not need for subsystem
- 11:20 AM Bug #15590 (Open): Subsystem option is not listing in Part tree loaded by in add part screen
- 02:30 PM Bug #15493 (Fixed with Hotfix): Legend status not showing in https site
- Working fine.Verified as hot fix
- 02:21 PM Bug #15593 (Fixed with Hotfix): Copying any value in new cummins report it takes some space in front
- Working fine.Verified as hot fix
- 02:18 PM Bug #15596 (Fixed with Hotfix): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- Working fine.Verified as hot fix
- 02:17 PM Bug #15589 (Resolved): Unable to add parts selected from part tree loaded as 'system'
- 11:20 AM Bug #15589 (Open): Unable to add parts selected from part tree loaded as 'system'
- 02:17 PM Bug #15588 (Resolved): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity
- its not an issue.its a commodity
- 11:20 AM Bug #15588 (Open): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity
- 12:44 PM Bug #15602 (Closed): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing i...
- 12:29 PM Bug #15597 (Resolved): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator
- 11:20 AM Bug #15597 (Open): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator
- 12:10 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 11:45 AM Bug #15601 (Closed): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .
- Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the doc...
- 11:20 AM Bug #15591 (Open): Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inherited for checklists 'parent has score' alert keep on displaying
- 11:20 AM Bug #15580 (Open): Suite : When Assigning module access for the first time the Drop down is not displaying fully
- 11:20 AM Bug #15579 (Open): Suite : Supplier is not getting created even after filling all the mandatory fields.
01/24/2020
- 07:40 PM Bug #15600 (Closed): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting char...
- 07:34 PM Bug #15571 (In Progress): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- 03:15 PM Bug #15571 (Not Resolved): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- Verified few fields are still have alignment issue.refer screen shot
- 07:13 PM Bug #15558 (Resolved): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 06:54 PM Bug #15599 (Closed): Multi-Site : Created departments are not listing in Operator menu
- Multi-Site : Created departments are not listing in Operator menu
- 06:53 PM Bug #15598 (Closed): Report --> gage due report is not showing in the report tab
- Calibration, Calibration verification, GRR attribute and stability --> When clicking on Report button, it shows error...
- 06:46 PM Bug #15383 (Closed): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 06:42 PM Bug #15520 (In Progress): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 05:25 PM Bug #15520 (Not Resolved): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 06:41 PM Bug #15394 (Not Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 06:41 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- fixed and check in to tfs
- 06:40 PM Bug #15394 (Not Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 06:39 PM Bug #15364 (Closed): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- Issue occurs Sporadically. So Closed in SP925 Cycle 5
- 06:37 PM Bug #14973 (Closed): Receiving Inspection : Inspection entry pop-up is not loading for PIs having special characters in Invoice number
- Works with below special characters !@$%^&*()-:<>
- 06:35 PM Bug #15509 (Closed): Design and Process VDA - Step 7 takes more time to load.(16 Seconds)
- Closed in SP925 Cycle 5
- 06:34 PM Bug #15497 (Closed): Process VDA - Failure Analysis - While performing Skip Level Flow down it duplicates the Element
- Closed in SP925 Cycle 5
- 06:34 PM Bug #15502 (Closed): (Multi Date)Design and Process VDA - When the Date format is changed, Following issues occurs.(Refer Description)
- Closed in SP925 Cycle 5
- 06:33 PM Bug #15508 (Closed): Design and Process VDA - Dates are not displayed as per Date format.(DD/MM/YYYY) (Refer Description)
- Closed in SP925 Cycle 5
- 06:29 PM Bug #15561 (Closed): Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) approved label is not converted into Chinese and Spanish
- 06:27 PM Bug #15593 (Resolved): Copying any value in new cummins report it takes some space in front
- If we manually entered it will not take space means you are copying with space
- 06:26 PM Bug #15593 (Open): Copying any value in new cummins report it takes some space in front
- Not an issue. Verified in 47.
- 04:16 PM Bug #15593 (Closed): Copying any value in new cummins report it takes some space in front
- Copying any value in new cummins report it takes some space in front
- 06:25 PM Bug #15427 (Closed): Actions: When a user tries to complete the Bias, Calibration, Calibration verification, Linearity, GRR and stability study through action screen, without entering the Approved and Remarks field it getting saved.
- 06:21 PM Bug #15352 (Closed): Master--> Able to save the master without entering the linearity initial schedule
- 06:19 PM Bug #15438 (Closed): Even After mapping KPIs to the Dashboard, clicking on it not displays the reports related to it.
- 05:57 PM Bug #15354 (Not Resolved): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 05:45 PM Bug #15457 (Closed): Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is scheduled in Site 2
- 05:42 PM Bug #15499 (Closed): EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- Closed in SP925 Cycle 5
- 05:35 PM Bug #15418 (Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 05:35 PM Bug #15390 (Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 05:34 PM Bug #15565 (Closed): Tree Diagram: Edited requirement with large data, failure and requirements are overlapped
- Closed in SP925 Cycle 5
- 05:32 PM Bug #15559 (Closed): Tree Diagram: Edited requirement displayed outside the element Box
- Closed in SP925 Cycle 5
- 05:28 PM Bug #15519 (Closed): EFC Tree: Function Flow down element is displayed in EFC Tree, When nothing is mapped on It
- Closed in SP925 Cycle 5
- 05:27 PM Bug #15596 (Resolved): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- 05:26 PM Bug #15596 (Open): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- No able to replicate
- 04:58 PM Bug #15596 (Closed): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- 05:12 PM Bug #15535 (Closed): Document: GIF document is viewed as Image
- 05:12 PM Bug #15533 (Closed): Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to set the existing download name for newly downloaded documents
- 05:10 PM Bug #15547 (TBD): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 05:10 PM Bug #15547 (Open): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 01:12 PM Bug #15547 (Not Resolved): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 05:03 PM Bug #15567 (Closed): Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- Verified in Cy-5 Build and closed
- 05:01 PM Bug #15471 (Closed): VOC: While enter large word in VOC the alignment is not proper
- Closed in SP925 Cycle 5
- 04:59 PM Bug #15597 (Closed): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator
- Production OEE: When creating the 5 different part with description and selecting two for parts production in product...
- 04:56 PM Bug #15382 (Closed): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- Closed in SP925 Cycle 5
- 04:56 PM Bug #15568 (Closed): Server error is displayed while publishing the document Using Manufacturing Report
- Verified in Cy-5 build and Closed
- 04:52 PM Bug #15323 (Closed): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- Closed in SP925 Cycle 5
- 04:49 PM Suggestion #15337 (Closed): Bill of Material - Last Added and Added First can be Renamed as Last Added and First Added
- Closed in SP925 Cycle 5
- 04:47 PM Bug #15539 (Closed): Block Diagram: color is not applied and its not working in Show Interface Type
- Closed in SP925 Cycle 5
- 04:46 PM Bug #15545 (Closed): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 04:44 PM Bug #15563 (Closed): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- Closed in SP925 Cycle 5
- 04:41 PM Bug #15546 (Closed): TSR: While Adding functions in TSR the alignment is not proper
- Closed in SP925 Cycle 5
- 04:37 PM Bug #15570 (Closed): TSR - Safety goal ID is not displayed in TSR Document
- Closed in SP925 Cycle 5
- 04:18 PM Bug #15595 (Closed): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Is...
- 04:17 PM Bug #15594 (Closed): Label issue in new cummins report for THLcolor code
- Label issue in new cummins report for THLcolor code
- 04:14 PM Bug #15592 (Closed): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- 04:12 PM Bug #15591 (Closed): Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inherited for checklists 'parent has score' alert keep on displaying
- Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inhe...
- 04:05 PM Bug #15590 (Closed): Subsystem option is not listing in Part tree loaded by in add part screen
- Subsystem option is not listing in Part tree loaded by in add part screen
- 04:03 PM Bug #15589 (Closed): Unable to add parts selected from part tree loaded as 'system'
- Unable to add parts selected from part tree loaded as 'system'
- 04:02 PM Bug #15588 (Closed): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity
- Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not s...
- 03:59 PM Bug #15587 (Closed): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- 03:57 PM Bug #15586 (Closed): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- 03:56 PM Bug #15585 (Resolved): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 03:54 PM Bug #15443 (Not Resolved): Report Issues : Please refer the description
- 03:52 PM Bug #15443 (Yet to Verify): Report Issues : Please refer the description
- 03:51 PM Bug #14419 (Closed): Multi Language : Please see the below mentioned issues
- 03:50 PM Bug #14419 (Fixed with Hotfix): Multi Language : Please see the below mentioned issues
- 03:41 PM Bug #15553 (Closed): Multi langugage
- 03:40 PM Bug #13275 (Closed): Inspection parameters:Pagination and sorting is not working as expected in characteristics grid
- 03:35 PM Bug #15514 (Closed): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 03:27 PM Bug #15583 (Closed): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment
- "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with...
- 03:24 PM Bug #15582 (Closed): Re upload Extension request is not working
- Re upload Extension request is not working
Verified in Inst 1 and Inst 3 DB's - 03:19 PM Bug #15524 (Closed): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- verified and working fine in CY5
- 03:19 PM Bug #15530 (Closed): New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to auditee" Issue2:not able to view in "Click to view report" and also
- verified and working fine in CY5
- 03:18 PM Bug #15581 (Closed): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message
- Multi language: Social media--> When tries to change the language from logged in (language preference) details, it sh...
- 03:15 PM Bug #15555: Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- For non ITAR the ITAR level created in Aqua still displays.
- 03:15 PM Bug #15555 (Closed): Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- 03:13 PM Bug #15572 (Closed): New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- 03:13 PM Bug #15572: New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- verified and working fine in CY5
- 03:13 PM Bug #15575 (Closed): New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit status is not matched.find the screen shot
- verified and working fine in CY5
- 03:13 PM Bug #15580 (Closed): Suite : When Assigning module access for the first time the Drop down is not displaying fully
- When Assigning module access for the first time the Drop down is not displaying fully
- 03:13 PM Bug #15576 (Closed): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- verified and working fine in CY5
- 03:08 PM Bug #15527 (Closed): TOC:When doing revision/deletion, Level tree should be displayed in LHS screen and the RHS should show action screen
- 03:08 PM Bug #15521 (Closed): Document Mgmt:For a particular folder FCPA, route link is not displayed
- 03:08 PM Bug #15488 (Closed): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- 03:04 PM Bug #15503 (Closed): Folder Management: Without selecting ITAR route, it should not allow the user to save the folder if the user checks EDIT ITAR route checkbox. Show alert message instead of allowing to save
- 03:04 PM Bug #15504 (Closed): Route: On entering the existing route name and create a new route, system shows saved successfully and the new route screen shows the form w/o any data
- 03:02 PM Bug #15507 (Closed): New Draft Request: By default draft requester should be the draft viewer. The draft viewer is not taken when selecting draft viewers and checked ITAR compliance and unchecked it and continue(pls check desc as well)
- 03:01 PM Bug #15491 (Closed): Sort/Scrap/Rework qty is displaying for all Receiving/Final/Inprocess Inspection items in department worksheet
- 02:57 PM Bug #15512 (Closed): Generate document URL is not working as expected, shows blank screen when pasting the URL. After sometime, it asks the user to open/Save in IE and opens the document in IE edge. NON ITAR user can view the ITAR document by using this link
- 02:56 PM Bug #15554 (Closed): Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment
- 02:54 PM Bug #15579 (Closed): Suite : Supplier is not getting created even after filling all the mandatory fields.
- Supplier is not getting created even after filling all the mandatory fields.
- 02:49 PM Bug #15284 (Closed): ShowStopper: Non-ITAR User can able to access the ITAR PI Documents
- This issue is fixed so closing this issue in Cy-5 on 24.01.2020
- 02:48 PM Bug #15385 (Closed): Utility Equipment: Need Equipment path details for Utility Equipment
- 02:46 PM Bug #15408 (Closed): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- 02:45 PM Bug #15522 (Closed): Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown, but it shows assign by admin in doc mgmt route link dropdown
- 02:44 PM Bug #15387 (Closed): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- 02:43 PM Bug #15523 (Closed): ITAR document is going to NON ITAR Approver. PFB the scenario
- 02:40 PM Bug #15540 (Not Resolved): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 02:38 PM Bug #15513 (Closed): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 02:26 PM Bug #15528 (Closed): Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- 02:23 PM Bug #15543 (Closed): PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated(Requested yo delivered)
- 02:23 PM Bug #15292 (Closed): NON-ITAR Users: Users can able to Copy and Paste the ITAR PI Segments
- This issue is fixed so closing this issue in Cy-5 on 24.01.2020
- 02:20 PM Bug #15472 (Yet to Verify): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 02:19 PM Bug #15517 (Closed): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 02:18 PM Bug #15532 (Closed): Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document change request in admin actions.Also the NONITAR module admin can able to modify/bypass the approvers from admin action for an ITAR document
- 02:09 PM Bug #15577 (Closed): Main2: Search PI is not working
- This issue is fixed so closing this issue in Cy-5 on 24.01.2020
- 02:05 PM Bug #15378 (Closed): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 02:03 PM Bug #15506 (Closed): In New Concern page, after selecting the supplier, the supplier part number field is not showing the parts that are linked to the selected supplier
- 02:02 PM Bug #15453 (Closed): Resource load across projects showing blank page
- But performance wise it takes time
- 02:00 PM Bug #15455 (Closed): Attach task from template - "Select deliverable" button can be view only after scrolling
- 02:00 PM Bug #15455 (Fixed with Hotfix): Attach task from template - "Select deliverable" button can be view only after scrolling
- Not seeing the scroll in Team 1 DB
- 10:59 AM Bug #15391 (Resolved): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 10:31 AM Bug #15560 (Closed): Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
Also available in: Atom