Activity
From 01/16/2020 to 02/14/2020
02/14/2020
- 04:52 PM Bug #15656 (Closed): Reports-Adherence Report-VEM audit-If an audit has updated with new date then it is not showing in the report
- Reports-Adherence Report-VEM audit-If an audit has updated with new date then it is not showing in the report
- 04:35 PM Bug #15655 (Closed): Reports-Adherence Report-VEM audit-If an audit contains two commodities then only one commodity is alone showing in report
- Reports-Adherence Report-VEM audit-If an audt contains two commodities then only one commodity is alone showing in re...
02/11/2020
- 07:26 PM Bug #15467 (Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance
- As of now we don't have any option to handle in build. It's need to be done by Suite team.
need to discuss with bi...
02/10/2020
- 01:04 PM Bug #15467 (Not Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance
- Manual Insert is OK. But need to handled in build without any manual work.
02/07/2020
- 05:32 PM Bug #15356 (Closed): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.
- 05:32 PM Bug #15356: Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.
- Verified
- 05:32 PM Bug #15429 (Closed): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- Closed
- 11:58 AM Bug #15241 (Not Resolved): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- 11:58 AM Bug #15241: Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- Still the issue occur
- 11:51 AM Bug #15640 (Closed): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot
- Verified
- 09:44 AM Bug #15643 (Open): Actions Menu: For the Created Single Action in DFMEA its displaying Multiple Actions in the same name in Actions Menu
02/06/2020
- 05:53 PM Bug #15641 (Closed): My Dashboard issue: Please refer the description.
- 05:11 PM Bug #15359 (Closed): Multi site: Email->Email link is not redirecting to correct location
- 05:10 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location
- Verified by sara.Closing this issue
- 05:06 PM Bug #15359 (Resolved): Multi site: Email->Email link is not redirecting to correct location
- 11:32 AM Bug #15643 (Open): Actions Menu: For the Created Single Action in DFMEA its displaying Multiple Actions in the same name in Actions Menu
- In the DFMEA if the User creating a Single Action and by viewing it in Actions Menu its displaying as Multiple Action...
02/05/2020
- 05:59 PM Bug #15397 (Closed): Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed
- Verified in CY-9 and Closed
- 03:51 PM Bug #15523 (Closed): ITAR document is going to NON ITAR Approver. PFB the scenario
- 03:39 PM Bug #15630 (Reopen): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
02/04/2020
- 05:44 PM Bug #15642 (Closed): Date gets reduced to the previous day during publishing—Check by changing the time zone
- HTTPS: Date gets reduced to the previous day during publishing—Check by changing the time zone
- 02:57 PM Bug #15241 (Resolved): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- 02:48 PM Bug #15630 (Closed): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
- Couldnt replicate this, so closing the issue
- 02:33 PM Bug #15472 (Closed): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 01:28 PM Bug #15483 (Closed): HTTPS: Admin actions: Pending doc drafts shows the wrong count in LHS
- closed in cy 8
- 01:27 PM Bug #15603 (Closed): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.
- Closed in cy 8
- 01:27 PM Bug #15603 (Fixed with Hotfix): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.
- 12:55 PM Bug #15602 (Closed): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- After Discussion with Biju and Rangaraj -> Close icon is removed for all the widgets across modules and Verified Expa...
- 12:43 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 12:43 PM Bug #15397 (Resolved): Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed
- 11:21 AM Bug #15640 (Resolved): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot
02/03/2020
- 05:51 PM Bug #15630: New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
- Will check in next build and update
- 04:46 PM Bug #15630 (Resolved): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
- Not able to replicate
- 05:50 PM Bug #15523: ITAR document is going to NON ITAR Approver. PFB the scenario
- Will check in next build and update
- 04:45 PM Bug #15523 (Resolved): ITAR document is going to NON ITAR Approver. PFB the scenario
- Not able to replicate
- 02:20 PM Bug #15359 (Not Resolved): Multi site: Email->Email link is not redirecting to correct location
- 02:20 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location
- Email is not generating for multi-site
- 01:51 PM Bug #15633 (Closed): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- 10:02 AM Bug #15633 (Resolved): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- 01:50 PM Bug #15591 (Closed): Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inherited for checklists 'parent has score' alert keep on displaying
- Closing this issue and we could not able to reproduce it
- 01:49 PM Bug #15639 (Closed): Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not showing properly
- Closing this issue and we could not able to reproduce it
- 01:48 PM Bug #15639 (Open): Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not showing properly
- 01:48 PM Bug #15641 (Open): My Dashboard issue: Please refer the description.
- 12:45 PM Bug #15641 (Closed): My Dashboard issue: Please refer the description.
- 1)When Clicking on dashboard redirect arrow : No Response.
2)Click on the Whitespace, Now the arrow gets disappears. - 01:48 PM Bug #15640 (Open): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot
- 01:10 PM Bug #15390 (Closed): Report -> Audit Repeat NC -> Various finding status is missing
- 12:59 PM Bug #15451 (Closed): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- 12:41 PM Bug #15451 (Not Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- Not working as expected on any time period.
- 12:50 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 12:39 PM Bug #15581 (Closed): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message
- Verified in SP_925 CY-7 Build and Closed
- 12:35 PM Suggestion #15564 (Closed): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- As discussed with Pradeepa, Add ASIL option for parent element can be displayed and REQT ASIl can also be changed. So...
- 12:32 PM Suggestion #15564 (Resolved): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- 10:26 AM Bug #15422 (Closed): Report -> Auditor Utilization -> Wrong Count is displayed for an auditor utilized hrs
- As discussed with biju and bijoy on 30-01-20202 , the report is not included in the build - SP925 Final cycle (8)
- 10:25 AM Bug #15626 (Closed): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
- As discussed with biju and bijoy on 30-01-20202 , the report is not included in the build - SP925 Final cycle (8)
- 10:25 AM Bug #15627 (Closed): Auditor Utilization -> Utilization type is not working as expected
- As discussed with biju and bijoy on 30-01-20202 , the report is not included in the build - SP925 Final cycle (8)
- 09:53 AM Bug #15479 (Closed): Project/ Program Unarchive is not working.
- 09:47 AM Bug #15479: Project/ Program Unarchive is not working.
- Issue fixed in Cy-7
- 09:52 AM Bug #15406: TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
- Need to discuss with Madhu
- 09:51 AM Bug #15406 (TBD): TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
- 09:51 AM Bug #15406 (Open): TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
01/31/2020
- 05:27 PM Bug #15523 (Reopen): ITAR document is going to NON ITAR Approver. PFB the scenario
- 1.After publishing the doc pro , In Doc management the Approval route displays Module auto approval but it still foll...
- 04:55 PM Bug #15625 (Closed): Sporadic issue:data could not save alert on clicking save button in supplier contact page
- Closing this defect as it is sporadic issue
- 04:49 PM Bug #15608 (Closed): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even
- Part tree page load - 40 sec
Expanding the tree to show complete part details - 3m 12 sec
Hence closing this issue - 01:20 PM Bug #15608 (Resolved): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even
- 04:43 PM Bug #15520 (Closed): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 04:43 PM Bug #15617 (Closed): VOC: When doing only function flow-down in VOC, it displays wrong indicator
- 04:43 PM Bug #15618 (Closed): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- 04:43 PM Bug #15619 (Closed): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
- 04:32 PM Bug #15631 (Closed): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- 11:35 AM Bug #15631 (Resolved): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- 10:36 AM Bug #15631 (Open): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- 04:32 PM Bug #15616 (Closed): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 10:14 AM Bug #15616 (Resolved): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 03:18 PM Bug #15585 (TBD): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 03:17 PM Bug #15585 (Open): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 02:05 PM Bug #15635 (Closed): New cummins vam report-alert for part number is missing
- Working fine in cy8
- 01:20 PM Bug #15635 (Resolved): New cummins vam report-alert for part number is missing
- 10:36 AM Bug #15635 (Open): New cummins vam report-alert for part number is missing
- 02:05 PM Bug #15634 (Closed): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type)
- Working fine in cy8
- 01:20 PM Bug #15634 (Resolved): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type)
- 10:36 AM Bug #15634 (Open): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type)
- 02:04 PM Bug #15636 (Closed): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts
- Working fine in cy8
- 01:20 PM Bug #15636 (Resolved): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts
- 10:36 AM Bug #15636 (Open): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts
- 01:18 PM Bug #15632 (Closed): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- not an issue
- 01:18 PM Bug #15632 (Fixed with Hotfix): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- 10:36 AM Bug #15632 (Open): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- 01:16 PM Bug #15640 (Closed): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot
- Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue3.Refer screen shot
- 01:15 PM Bug #15639 (Closed): Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not showing properly
- Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not...
- 12:05 PM Bug #15613 (Closed): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- 10:36 AM Bug #15633 (Open): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- 10:36 AM Bug #15630 (Open): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
01/30/2020
- 06:13 PM Bug #15623 (Closed): In Concerns part selection pop up, search option is not working.
- 06:07 PM Bug #15623 (Resolved): In Concerns part selection pop up, search option is not working.
- Not Replicated Checked with QA
- 06:05 PM Bug #15636 (Closed): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts
- Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed...
- 05:59 PM Bug #15621 (Closed): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- Working fine in c7
- 05:52 PM Bug #15550 (Closed): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- Working fine in c7
- 05:51 PM Bug #15610 (Closed): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also
- Working fine in c7
- 05:51 PM Bug #15612 (Closed): Social Media-VAM audit is listing in supplier contact social media page
- Working fine in c7
- 05:51 PM Bug #15537 (Closed): Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- Verified in Cy-7 build and closed
- 05:51 PM Bug #15628 (Closed): No email for scheduling VAM audit
- Working fine in c7
- 05:51 PM Bug #15526 (Closed): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- Working fine in c7
- 11:29 AM Bug #15526 (Fixed with Hotfix): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- verified as hot fix and working gine
- 05:50 PM Bug #15607 (Closed): Risk Master-Deleted entity from suite listing in riskmaster menu
- Working fine in c7
- 05:50 PM Bug #15595 (Closed): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- working fine.issue has part number field is missing raised as new issue in cy7
- 05:48 PM Bug #15635 (Closed): New cummins vam report-alert for part number is missing
- New cummins vam report-alert for part number is missing
- 05:47 PM Bug #15634 (Closed): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type)
- Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it import...
- 05:45 PM Bug #15633 (Closed): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- Number of Supplier contact displaying mismatch in Address and supplier contact listing screen
- 05:43 PM Bug #15632 (Closed): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving
- 05:40 PM Bug #15241 (Reopen): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- Issue reproducible in cy6 hence reopening the issue from cy1
- 05:36 PM Bug #15631 (Closed): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings
- 05:30 PM Bug #15627 (Resolved): Auditor Utilization -> Utilization type is not working as expected
- 05:28 PM Bug #15627 (Not Resolved): Auditor Utilization -> Utilization type is not working as expected
- 11:20 AM Bug #15627 (Resolved): Auditor Utilization -> Utilization type is not working as expected
- 11:20 AM Bug #15627 (Open): Auditor Utilization -> Utilization type is not working as expected
- 04:48 PM Bug #15606 (Closed): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- 09:52 AM Bug #15606 (Fixed with Hotfix): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- 04:32 PM Bug #15630 (Closed): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.
- New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to repli...
- 03:29 PM Bug #15601 (Closed): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .
- 03:29 PM Bug #15601 (Fixed with Hotfix): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .
- 03:25 PM Bug #15616 (Not Resolved): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 03:00 PM Bug #15622 (Closed): Holiday List creating with Special character in Additional holidays Specification displays Error
- Verified in CY-7 Build and Closed
- 12:49 AM Bug #15622 (Resolved): Holiday List creating with Special character in Additional holidays Specification displays Error
- 02:53 PM Bug #15620 (Closed): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document
- 02:48 PM Bug #15605 (Closed): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder
- 02:45 PM Bug #15604 (Closed): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.
- 12:49 AM Bug #15604 (Resolved): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.
- 12:13 PM Bug #15618 (Fixed with Hotfix): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- 11:20 AM Bug #15626 (Resolved): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
- 11:20 AM Bug #15626 (Open): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
01/29/2020
- 10:33 PM Bug #15451 (Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- 02:57 PM Bug #15451 (Not Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- Scenario #1 Time period: Weekly or monthly : There is some data available. But system is showing no data available.
- 10:33 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 04:21 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 09:57 PM Bug #15605 (Resolved): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder
- 04:02 PM Bug #15605 (Open): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder
- 09:56 PM Bug #15616 (Resolved): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 04:02 PM Bug #15616 (Open): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- 12:48 PM Bug #15616 (Closed): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup
- Multi site: When activate the folder in other site, shows double in folder management and document management
- 09:36 PM Bug #15620 (Resolved): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document
- 04:02 PM Bug #15620 (Open): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document
- 01:12 PM Bug #15620 (Closed): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document
- Document Info link: Doc URL is not displayed for NON ITAR document
- 08:08 PM Bug #15520 (Resolved): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 07:15 PM Bug #15619 (Resolved): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
- 04:02 PM Bug #15619 (Open): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
- 12:57 PM Bug #15619 (Closed): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
- Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
Refer Screenshot - 07:02 PM Bug #15550 (Resolved): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- 02:09 PM Bug #15550 (Not Fixed with Hotfix): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- verified that still view projects rights is showing.refer screen shot
- 07:02 PM Bug #15625 (Resolved): Sporadic issue:data could not save alert on clicking save button in supplier contact page
- 04:02 PM Bug #15625 (Open): Sporadic issue:data could not save alert on clicking save button in supplier contact page
- 03:48 PM Bug #15625 (Closed): Sporadic issue:data could not save alert on clicking save button in supplier contact page
- Sporadic issue:data could not save alert on clicking save button in supplier contact page
- 07:02 PM Bug #15610 (Resolved): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also
- 04:02 PM Bug #15610 (Open): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also
- 07:01 PM Bug #15526 (Resolved): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- 03:47 PM Bug #15526 (Not Resolved): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- unable to verify this issue as not able to import the same sheet (SQE,SQM alone specified) second time ,page keep on ...
- 06:19 PM Bug #15628 (Resolved): No email for scheduling VAM audit
- 06:19 PM Bug #15628 (Open): No email for scheduling VAM audit
- 05:20 PM Bug #15628 (Closed): No email for scheduling VAM audit
- No email for scheduling VAM audit
- 06:12 PM Bug #15418 (Closed): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 04:12 PM Bug #15418 (Not Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 05:55 PM Bug #15479: Project/ Program Unarchive is not working.
- Issue Closed and Verified
- 05:48 PM Bug #15613 (Fixed with Hotfix): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- 03:55 PM Bug #15613 (Resolved): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- 03:55 PM Bug #15613 (Open): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- 11:39 AM Bug #15613 (Closed): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.
- After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also
- 05:39 PM Bug #15617 (Resolved): VOC: When doing only function flow-down in VOC, it displays wrong indicator
- 03:02 PM Bug #15617 (Open): VOC: When doing only function flow-down in VOC, it displays wrong indicator
- 12:49 PM Bug #15617 (Closed): VOC: When doing only function flow-down in VOC, it displays wrong indicator
- VOC: When doing only function flow-down in VOC, it displays red indicator instead of Yellow color
Refer Screenshot - 05:26 PM Bug #15607 (Fixed with Hotfix): Risk Master-Deleted entity from suite listing in riskmaster menu
- Verified as hot fix and working fine in cy6
- 04:22 PM Bug #15607 (Resolved): Risk Master-Deleted entity from suite listing in riskmaster menu
- 04:02 PM Bug #15607 (Open): Risk Master-Deleted entity from suite listing in riskmaster menu
- 05:24 PM Bug #15595 (Fixed with Hotfix): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Verified as hot fix and working fine in cy6
- 03:30 PM Bug #15595 (Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- 01:54 PM Bug #15595 (Not Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Verified that ISO/TS REG field has no alert,
standard on approval and signed packaging agreement has same alert... - 05:19 PM Bug #15390 (Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 04:21 PM Bug #15390 (Not Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 05:01 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- As discussed with Sabu, we can educate customer to set route
- 04:58 PM Bug #15547 (Closed): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 04:41 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- Now its not showing error, but the document gets published
- 04:27 PM Bug #15627 (Closed): Auditor Utilization -> Utilization type is not working as expected
- Auditor Utilization -> Utilization type is not working as expected . the report showing only specific datas. 2019 and...
- 04:26 PM Bug #15626 (Closed): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
- Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized"
- 04:24 PM Bug #15420 (Closed): Report - Auditor Utilization -> Type -> Utilized and Not Utilized data's are same
- 04:22 PM Bug #15621 (Resolved): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- 04:02 PM Bug #15621 (Open): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- 02:30 PM Bug #15621 (Closed): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite
- 04:21 PM Bug #15436 (Closed): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 04:11 PM Bug #15464 (Closed): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- 04:02 PM Bug #15623 (Open): In Concerns part selection pop up, search option is not working.
- 02:59 PM Bug #15623 (Closed): In Concerns part selection pop up, search option is not working.
- In Concerns part selection pop up, search option is not working. After selecting in manually the failure modes are no...
- 04:02 PM Bug #15622 (Open): Holiday List creating with Special character in Additional holidays Specification displays Error
- 02:50 PM Bug #15622 (Closed): Holiday List creating with Special character in Additional holidays Specification displays Error
- Holiday List creating with Special character in Additional holidays Specification displays Error
- 04:02 PM Bug #15608 (Open): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even
- 04:02 PM Bug #15604 (Open): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.
- 04:02 PM Bug #15603 (Open): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.
- 04:02 PM Bug #15601 (Open): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .
- 03:56 PM Bug #15618 (Resolved): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- 03:55 PM Bug #15618 (Open): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- 12:52 PM Bug #15618 (Closed): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
- Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
Refer Screenshot - 03:52 PM Bug #15433 (Closed): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- verified and working fine
- 03:29 PM Bug #15406: TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP
- Need to discuss with Sabu and Bijoy
- 03:29 PM Bug #15585: TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- Need to discuss with Sabu and Bijoy
- 03:11 PM Bug #15544 (Closed): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- verified and working fine in cy6
- 02:59 PM Bug #15446 (Closed): BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel
- verified and working fine in cy6
- 02:58 PM Bug #15265 (Closed): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- verified and working fine in cy6
- 02:53 PM Bug #15423 (Closed): Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- 02:52 PM Bug #15562 (Closed): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized"
- 02:51 PM Bug #15538 (Closed): Email validation is not done during Supplier creation
- [email protected]
- 02:51 PM Bug #15551 (Closed): Need commodity,system and Subsystem field to be listed in the part details screen.
- verified and working fine in cy6
- 02:50 PM Bug #15552 (Closed): On mouse hovering the production item, parent name is showing as "null".
- verified and working fine in cy6
- 02:45 PM Bug #15405 (Closed): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- Verified and working fine in cy6
- 02:43 PM Bug #15602 (Not Resolved): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- In All the widgets Close icon is missing and in My dashboard expand and collapse option is not working.
- 02:32 PM Bug #15447 (Closed): Supplier-> New supplier-> View log-> Login as new user it has show the only the current history status not previous history some other user (supplier)
- verified that restrict with an alert 'no data found'
- 02:29 PM Bug #15272 (Closed): While Changing the Process from In Active to Active or From Active to In Active Displays alert as "Duplicate process"
- Issue verified in SP_925 CY-6 and Closed
- 02:25 PM Bug #15612 (Resolved): Social Media-VAM audit is listing in supplier contact social media page
- 02:24 PM Bug #15612 (Open): Social Media-VAM audit is listing in supplier contact social media page
- 02:22 PM Bug #15252 (Closed): Non ITAR users are listing while providing Access to Suite,Site and Module
- Verified in SP_925 Cy-6 and Closed
- 02:20 PM Bug #15277 (Closed): While Changing From Non ITAR instance to ITAR Instance system does not display Valid validation
- Issue verified in SP_925 Cy-6 and Closed
- 02:10 PM Bug #15459 (Closed): Effectiveness -> When Verified is no, below validation and effectiveness should be disable
- verified and working fine in cy6
- 02:10 PM Bug #15534 (Closed): Multi site: Supplier is not listing.Showstopper for multi site.
- verified and working fine in cy6
- 02:08 PM Bug #15536 (Closed): Multi site: Risk level is not able to set because popup is missing
- verified and working fine in cy6
- 02:07 PM Bug #15548 (Closed): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- verified and working fine in cy6
- 02:01 PM Bug #15587 (Closed): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- verified and working fine
- 01:55 PM Bug #15593 (Closed): Copying any value in new cummins report it takes some space in front
- Verified as per dev comments and working fine
- 01:54 PM Bug #15611 (Closed): IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- Verified and working fine
- 01:33 PM Bug #15606 (Resolved): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- Fixed and patches provided for testing
- 01:26 PM Bug #15606 (Open): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- 12:56 PM Bug #15586 (Closed): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- Verified and working fine in cy6
- 12:55 PM Bug #15598 (Closed): Report --> gage due report is not showing in the report tab
- 12:18 PM Bug #15511 (Closed): Batch Download: When the ITAR document is downloaded by ITAR user, then the NON ITAR module admin can view the ITAR documents in downloadable form. Same for stitch document
- 10:48 AM Bug #15566 (Closed): Created a Escalation Route with special character given in the description field. in the listing it is showing as route name , description and site value incorrectly. Not able to open the route also for editing.
- Issue verified in SP_925 CY-6 and Closed
- 10:36 AM Bug #15579 (Closed): Suite : Supplier is not getting created even after filling all the mandatory fields.
- Verified in Sp_925 Cy-6 Build and Closed
- 09:59 AM Bug #15579 (Resolved): Suite : Supplier is not getting created even after filling all the mandatory fields.
01/28/2020
- 07:52 PM Bug #15593 (Resolved): Copying any value in new cummins report it takes some space in front
- Before Copying Anything. First Copy in notepad and Verify any space are there or not. If manually entered value doesn...
- 06:37 PM Bug #15593 (Not Fixed with Hotfix): Copying any value in new cummins report it takes some space in front
- Issue reproduciable in IE.find screen shot
- 07:50 PM Bug #15611 (Resolved): IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- 07:48 PM Bug #15611 (Open): IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- Can able replicate in IE. And the Same issue was reported in Comments of Bug #15595
- 06:47 PM Bug #15611 (Closed): IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- IE Browser-VEM-Unable to publish VEM report(submit to auditee)
- 07:50 PM Bug #15595 (Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Cannot Able to Replicate. -> Done With Few Fields
few fields not specified then report-> Kindly Mention in Screen ... - 06:37 PM Bug #15595 (Not Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Veriried issue as New cummins report-few fields not specified then report is unable to submit in IE browser
- 06:57 PM Bug #15443 (Closed): Report Issues : Please refer the description
- 06:55 PM Bug #15443 (Resolved): Report Issues : Please refer the description
- 06:57 PM Bug #15558 (Closed): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 06:55 PM Bug #15558 (Resolved): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 06:51 PM Bug #15599 (Closed): Multi-Site : Created departments are not listing in Operator menu
- 06:51 PM Bug #15600 (Closed): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- 06:50 PM Bug #15612 (Closed): Social Media-VAM audit is listing in supplier contact social media page
- Social Media-VAM audit is listing in supplier contact social media page
- 06:47 PM Bug #15610 (Closed): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also
- Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scr...
- 06:44 PM Bug #15608 (Closed): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even
- Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the ...
- 06:43 PM Bug #15607 (Closed): Risk Master-Deleted entity from suite listing in riskmaster menu
- Risk Master-Deleted entity from suite listing in riskmaster menu
- 06:42 PM Bug #15589 (Closed): Unable to add parts selected from part tree loaded as 'system'
- Verified and working fine in cy6
- 06:42 PM Bug #15594 (Closed): Label issue in new cummins report for THLcolor code
- Verified and working fine in cy6
- 06:42 PM Bug #15493 (Closed): Legend status not showing in https site
- Verified and working fine in cy6
- 06:41 PM Bug #15525 (Closed): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- Verified and working fine in cy6
- 06:41 PM Bug #15529 (Closed): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- Verified and working fine in cy6
- 06:41 PM Bug #15531 (Closed): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- Verified and working fine in cy6
- 06:40 PM Bug #15542 (Closed): New Cummins VAM Report->Audit Status->New report is not displayed in audit status .pls find screen shot
- Verified and working fine in cy6
- 06:40 PM Bug #15571 (Closed): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- Verified and working fine in cy6
- 06:39 PM Bug #15574 (Closed): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- Verified and working fine in cy6
- 06:39 PM Bug #15588 (Closed): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity
- Verified and working fine in cy6
- 06:38 PM Bug #15592 (Closed): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- Verified and working fine in cy6
- 06:36 PM Bug #15596 (Closed): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- Verified and working fine in CY6
- 06:28 PM Bug #15354 (Closed): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 06:27 PM Bug #15540 (Closed): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 06:00 PM Bug #15606 (Closed): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method
- In the Main Menu, Non-ITAR Users can able to access the ITAR PI Documents, When the Non-ITAR User directly click the ...
- 05:41 PM Bug #15597 (Closed): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator
- 05:03 PM Bug #15605 (Closed): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder
- New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select posit...
- 04:51 PM Bug #15394 (Closed): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- Closed in SP925 Cycle 6
- 03:52 PM Bug #15604 (Closed): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.
- In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory ...
- 03:41 PM Bug #15602 (Resolved): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- 03:40 PM Bug #15602 (Open): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- 03:38 PM Bug #15580 (Closed): Suite : When Assigning module access for the first time the Drop down is not displaying fully
- Verified in Cy-6 Build and closed
- 03:36 PM Bug #15580 (Resolved): Suite : When Assigning module access for the first time the Drop down is not displaying fully
- 03:34 PM Bug #15409 (Closed): About EWQIMS is not displaying Fully when clicked.
- Verified in Cy-6 build and closed
- 03:30 PM Bug #15603 (Closed): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.
- Social Media: On viewing document and closing the popup screen the screen getting collapsed.
Note : On closing an...
01/27/2020
- 09:01 PM Bug #15562 (Resolved): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized"
- 09:01 PM Bug #15420 (Resolved): Report - Auditor Utilization -> Type -> Utilized and Not Utilized data's are same
- 08:18 PM Bug #15558 (Not Fixed with Hotfix): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 08:01 PM Bug #15600 (Fixed with Hotfix): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- 05:52 PM Bug #15600 (Resolved): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- 11:20 AM Bug #15600 (Open): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- 07:53 PM Bug #15585 (Resolved): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 1.Need to add reporting subbusinessunit-not completed
2.Need to add multiple BU,SBU,RBU,RSBU- Completed - 11:20 AM Bug #15585 (Open): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 06:36 PM Bug #15356 (Yet to Verify): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.
- Need to verify in new build
- 06:36 PM Bug #15583 (Closed): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment
- Attachment only displayed in View report
- 03:52 PM Bug #15583 (Resolved): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment
- 11:20 AM Bug #15583 (Open): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment
- 06:27 PM Bug #15582 (Closed): Re upload Extension request is not working
- Verified in cycle 5
- 12:55 PM Bug #15582 (Resolved): Re upload Extension request is not working
- 11:20 AM Bug #15582 (Open): Re upload Extension request is not working
- 06:22 PM Bug #15540 (Resolved): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 06:14 PM Bug #15599 (Fixed with Hotfix): Multi-Site : Created departments are not listing in Operator menu
- 05:53 PM Bug #15599 (Resolved): Multi-Site : Created departments are not listing in Operator menu
- 12:23 PM Bug #15599 (In Progress): Multi-Site : Created departments are not listing in Operator menu
- 11:20 AM Bug #15599 (Open): Multi-Site : Created departments are not listing in Operator menu
- 06:03 PM Bug #15569 (Closed): Tooptip should be proper while hovering he icon
- 06:03 PM Bug #15569: Tooptip should be proper while hovering he icon
- verified in cycle 4
- 02:18 PM Bug #15569 (Resolved): Tooptip should be proper while hovering he icon
- 05:59 PM Bug #15342 (Closed): Uppercase and lower case should be proper throughout site
- Verified
- 05:53 PM Bug #15391 (Closed): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- Verified in cycle5
- 05:53 PM Bug #15468 (Closed): Audit Program -> Server error displayed when clicking on "delete" button
- 05:52 PM Bug #15468: Audit Program -> Server error displayed when clicking on "delete" button
- Verified in cycle 5
- 05:24 PM Bug #15598 (Fixed with Hotfix): Report --> gage due report is not showing in the report tab
- 03:23 PM Bug #15598 (Resolved): Report --> gage due report is not showing in the report tab
- 11:20 AM Bug #15598 (Open): Report --> gage due report is not showing in the report tab
- 05:05 PM Bug #15586 (Resolved): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- 11:20 AM Bug #15586 (Open): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- 04:44 PM Bug #15587 (Resolved): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- 11:20 AM Bug #15587 (Open): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- 04:18 PM Bug #15354 (Resolved): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 03:20 PM Bug #15501 (Closed): Report--> Gage study due report only need to display for husco.
- 03:20 PM Bug #15501 (Fixed with Hotfix): Report--> Gage study due report only need to display for husco.
- Need to display in main stream - Baskar comment
- 03:17 PM Bug #15581 (Resolved): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message
- 11:20 AM Bug #15581 (Open): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message
- 02:49 PM Bug #15592 (Resolved): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- Need to verify after Hotfix
- 11:20 AM Bug #15592 (Open): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- 02:48 PM Bug #15594 (Resolved): Label issue in new cummins report for THLcolor code
- Need to verify after Hotfix
- 11:20 AM Bug #15594 (Open): Label issue in new cummins report for THLcolor code
- 02:48 PM Bug #15595 (Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- Need to verify after Hotfix
- 11:20 AM Bug #15595 (Open): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- 02:48 PM Bug #15571 (Resolved): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- 02:31 PM Bug #15590 (Closed): Subsystem option is not listing in Part tree loaded by in add part screen
- As per Dev comments closing this defect
- 01:18 PM Bug #15590 (Resolved): Subsystem option is not listing in Part tree loaded by in add part screen
- 01:18 PM Bug #15590: Subsystem option is not listing in Part tree loaded by in add part screen
- as per sabu discussion not need for subsystem
- 11:20 AM Bug #15590 (Open): Subsystem option is not listing in Part tree loaded by in add part screen
- 02:30 PM Bug #15493 (Fixed with Hotfix): Legend status not showing in https site
- Working fine.Verified as hot fix
- 02:21 PM Bug #15593 (Fixed with Hotfix): Copying any value in new cummins report it takes some space in front
- Working fine.Verified as hot fix
- 02:18 PM Bug #15596 (Fixed with Hotfix): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- Working fine.Verified as hot fix
- 02:17 PM Bug #15589 (Resolved): Unable to add parts selected from part tree loaded as 'system'
- 11:20 AM Bug #15589 (Open): Unable to add parts selected from part tree loaded as 'system'
- 02:17 PM Bug #15588 (Resolved): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity
- its not an issue.its a commodity
- 11:20 AM Bug #15588 (Open): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity
- 12:44 PM Bug #15602 (Closed): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments)
- In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing i...
- 12:29 PM Bug #15597 (Resolved): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator
- 11:20 AM Bug #15597 (Open): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator
- 12:10 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 11:45 AM Bug #15601 (Closed): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .
- Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the doc...
- 11:20 AM Bug #15591 (Open): Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inherited for checklists 'parent has score' alert keep on displaying
- 11:20 AM Bug #15580 (Open): Suite : When Assigning module access for the first time the Drop down is not displaying fully
- 11:20 AM Bug #15579 (Open): Suite : Supplier is not getting created even after filling all the mandatory fields.
01/24/2020
- 07:40 PM Bug #15600 (Closed): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working
- Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting char...
- 07:34 PM Bug #15571 (In Progress): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- 03:15 PM Bug #15571 (Not Resolved): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- Verified few fields are still have alignment issue.refer screen shot
- 07:13 PM Bug #15558 (Resolved): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 06:54 PM Bug #15599 (Closed): Multi-Site : Created departments are not listing in Operator menu
- Multi-Site : Created departments are not listing in Operator menu
- 06:53 PM Bug #15598 (Closed): Report --> gage due report is not showing in the report tab
- Calibration, Calibration verification, GRR attribute and stability --> When clicking on Report button, it shows error...
- 06:46 PM Bug #15383 (Closed): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 06:42 PM Bug #15520 (In Progress): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 05:25 PM Bug #15520 (Not Resolved): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 06:41 PM Bug #15394 (Not Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 06:41 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- fixed and check in to tfs
- 06:40 PM Bug #15394 (Not Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 06:39 PM Bug #15364 (Closed): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- Issue occurs Sporadically. So Closed in SP925 Cycle 5
- 06:37 PM Bug #14973 (Closed): Receiving Inspection : Inspection entry pop-up is not loading for PIs having special characters in Invoice number
- Works with below special characters !@$%^&*()-:<>
- 06:35 PM Bug #15509 (Closed): Design and Process VDA - Step 7 takes more time to load.(16 Seconds)
- Closed in SP925 Cycle 5
- 06:34 PM Bug #15497 (Closed): Process VDA - Failure Analysis - While performing Skip Level Flow down it duplicates the Element
- Closed in SP925 Cycle 5
- 06:34 PM Bug #15502 (Closed): (Multi Date)Design and Process VDA - When the Date format is changed, Following issues occurs.(Refer Description)
- Closed in SP925 Cycle 5
- 06:33 PM Bug #15508 (Closed): Design and Process VDA - Dates are not displayed as per Date format.(DD/MM/YYYY) (Refer Description)
- Closed in SP925 Cycle 5
- 06:29 PM Bug #15561 (Closed): Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) approved label is not converted into Chinese and Spanish
- 06:27 PM Bug #15593 (Resolved): Copying any value in new cummins report it takes some space in front
- If we manually entered it will not take space means you are copying with space
- 06:26 PM Bug #15593 (Open): Copying any value in new cummins report it takes some space in front
- Not an issue. Verified in 47.
- 04:16 PM Bug #15593 (Closed): Copying any value in new cummins report it takes some space in front
- Copying any value in new cummins report it takes some space in front
- 06:25 PM Bug #15427 (Closed): Actions: When a user tries to complete the Bias, Calibration, Calibration verification, Linearity, GRR and stability study through action screen, without entering the Approved and Remarks field it getting saved.
- 06:21 PM Bug #15352 (Closed): Master--> Able to save the master without entering the linearity initial schedule
- 06:19 PM Bug #15438 (Closed): Even After mapping KPIs to the Dashboard, clicking on it not displays the reports related to it.
- 05:57 PM Bug #15354 (Not Resolved): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 05:45 PM Bug #15457 (Closed): Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is scheduled in Site 2
- 05:42 PM Bug #15499 (Closed): EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- Closed in SP925 Cycle 5
- 05:35 PM Bug #15418 (Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 05:35 PM Bug #15390 (Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 05:34 PM Bug #15565 (Closed): Tree Diagram: Edited requirement with large data, failure and requirements are overlapped
- Closed in SP925 Cycle 5
- 05:32 PM Bug #15559 (Closed): Tree Diagram: Edited requirement displayed outside the element Box
- Closed in SP925 Cycle 5
- 05:28 PM Bug #15519 (Closed): EFC Tree: Function Flow down element is displayed in EFC Tree, When nothing is mapped on It
- Closed in SP925 Cycle 5
- 05:27 PM Bug #15596 (Resolved): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- 05:26 PM Bug #15596 (Open): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- No able to replicate
- 04:58 PM Bug #15596 (Closed): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page
- 05:12 PM Bug #15535 (Closed): Document: GIF document is viewed as Image
- 05:12 PM Bug #15533 (Closed): Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to set the existing download name for newly downloaded documents
- 05:10 PM Bug #15547 (TBD): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 05:10 PM Bug #15547 (Open): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 01:12 PM Bug #15547 (Not Resolved): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 05:03 PM Bug #15567 (Closed): Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- Verified in Cy-5 Build and closed
- 05:01 PM Bug #15471 (Closed): VOC: While enter large word in VOC the alignment is not proper
- Closed in SP925 Cycle 5
- 04:59 PM Bug #15597 (Closed): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator
- Production OEE: When creating the 5 different part with description and selecting two for parts production in product...
- 04:56 PM Bug #15382 (Closed): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- Closed in SP925 Cycle 5
- 04:56 PM Bug #15568 (Closed): Server error is displayed while publishing the document Using Manufacturing Report
- Verified in Cy-5 build and Closed
- 04:52 PM Bug #15323 (Closed): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- Closed in SP925 Cycle 5
- 04:49 PM Suggestion #15337 (Closed): Bill of Material - Last Added and Added First can be Renamed as Last Added and First Added
- Closed in SP925 Cycle 5
- 04:47 PM Bug #15539 (Closed): Block Diagram: color is not applied and its not working in Show Interface Type
- Closed in SP925 Cycle 5
- 04:46 PM Bug #15545 (Closed): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 04:44 PM Bug #15563 (Closed): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- Closed in SP925 Cycle 5
- 04:41 PM Bug #15546 (Closed): TSR: While Adding functions in TSR the alignment is not proper
- Closed in SP925 Cycle 5
- 04:37 PM Bug #15570 (Closed): TSR - Safety goal ID is not displayed in TSR Document
- Closed in SP925 Cycle 5
- 04:18 PM Bug #15595 (Closed): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a
- New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Is...
- 04:17 PM Bug #15594 (Closed): Label issue in new cummins report for THLcolor code
- Label issue in new cummins report for THLcolor code
- 04:14 PM Bug #15592 (Closed): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down
- 04:12 PM Bug #15591 (Closed): Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inherited for checklists 'parent has score' alert keep on displaying
- Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inhe...
- 04:05 PM Bug #15590 (Closed): Subsystem option is not listing in Part tree loaded by in add part screen
- Subsystem option is not listing in Part tree loaded by in add part screen
- 04:03 PM Bug #15589 (Closed): Unable to add parts selected from part tree loaded as 'system'
- Unable to add parts selected from part tree loaded as 'system'
- 04:02 PM Bug #15588 (Closed): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity
- Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not s...
- 03:59 PM Bug #15587 (Closed): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.
- 03:57 PM Bug #15586 (Closed): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights
- 03:56 PM Bug #15585 (Resolved): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU
- 03:54 PM Bug #15443 (Not Resolved): Report Issues : Please refer the description
- 03:52 PM Bug #15443 (Yet to Verify): Report Issues : Please refer the description
- 03:51 PM Bug #14419 (Closed): Multi Language : Please see the below mentioned issues
- 03:50 PM Bug #14419 (Fixed with Hotfix): Multi Language : Please see the below mentioned issues
- 03:41 PM Bug #15553 (Closed): Multi langugage
- 03:40 PM Bug #13275 (Closed): Inspection parameters:Pagination and sorting is not working as expected in characteristics grid
- 03:35 PM Bug #15514 (Closed): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 03:27 PM Bug #15583 (Closed): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment
- "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with...
- 03:24 PM Bug #15582 (Closed): Re upload Extension request is not working
- Re upload Extension request is not working
Verified in Inst 1 and Inst 3 DB's - 03:19 PM Bug #15524 (Closed): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- verified and working fine in CY5
- 03:19 PM Bug #15530 (Closed): New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to auditee" Issue2:not able to view in "Click to view report" and also
- verified and working fine in CY5
- 03:18 PM Bug #15581 (Closed): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message
- Multi language: Social media--> When tries to change the language from logged in (language preference) details, it sh...
- 03:15 PM Bug #15555: Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- For non ITAR the ITAR level created in Aqua still displays.
- 03:15 PM Bug #15555 (Closed): Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- 03:13 PM Bug #15572 (Closed): New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- 03:13 PM Bug #15572: New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- verified and working fine in CY5
- 03:13 PM Bug #15575 (Closed): New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit status is not matched.find the screen shot
- verified and working fine in CY5
- 03:13 PM Bug #15580 (Closed): Suite : When Assigning module access for the first time the Drop down is not displaying fully
- When Assigning module access for the first time the Drop down is not displaying fully
- 03:13 PM Bug #15576 (Closed): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- verified and working fine in CY5
- 03:08 PM Bug #15527 (Closed): TOC:When doing revision/deletion, Level tree should be displayed in LHS screen and the RHS should show action screen
- 03:08 PM Bug #15521 (Closed): Document Mgmt:For a particular folder FCPA, route link is not displayed
- 03:08 PM Bug #15488 (Closed): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
- 03:04 PM Bug #15503 (Closed): Folder Management: Without selecting ITAR route, it should not allow the user to save the folder if the user checks EDIT ITAR route checkbox. Show alert message instead of allowing to save
- 03:04 PM Bug #15504 (Closed): Route: On entering the existing route name and create a new route, system shows saved successfully and the new route screen shows the form w/o any data
- 03:02 PM Bug #15507 (Closed): New Draft Request: By default draft requester should be the draft viewer. The draft viewer is not taken when selecting draft viewers and checked ITAR compliance and unchecked it and continue(pls check desc as well)
- 03:01 PM Bug #15491 (Closed): Sort/Scrap/Rework qty is displaying for all Receiving/Final/Inprocess Inspection items in department worksheet
- 02:57 PM Bug #15512 (Closed): Generate document URL is not working as expected, shows blank screen when pasting the URL. After sometime, it asks the user to open/Save in IE and opens the document in IE edge. NON ITAR user can view the ITAR document by using this link
- 02:56 PM Bug #15554 (Closed): Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment
- 02:54 PM Bug #15579 (Closed): Suite : Supplier is not getting created even after filling all the mandatory fields.
- Supplier is not getting created even after filling all the mandatory fields.
- 02:49 PM Bug #15284 (Closed): ShowStopper: Non-ITAR User can able to access the ITAR PI Documents
- This issue is fixed so closing this issue in Cy-5 on 24.01.2020
- 02:48 PM Bug #15385 (Closed): Utility Equipment: Need Equipment path details for Utility Equipment
- 02:46 PM Bug #15408 (Closed): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- 02:45 PM Bug #15522 (Closed): Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown, but it shows assign by admin in doc mgmt route link dropdown
- 02:44 PM Bug #15387 (Closed): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- 02:43 PM Bug #15523 (Closed): ITAR document is going to NON ITAR Approver. PFB the scenario
- 02:40 PM Bug #15540 (Not Resolved): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 02:38 PM Bug #15513 (Closed): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 02:26 PM Bug #15528 (Closed): Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- 02:23 PM Bug #15543 (Closed): PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated(Requested yo delivered)
- 02:23 PM Bug #15292 (Closed): NON-ITAR Users: Users can able to Copy and Paste the ITAR PI Segments
- This issue is fixed so closing this issue in Cy-5 on 24.01.2020
- 02:20 PM Bug #15472 (Yet to Verify): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 02:19 PM Bug #15517 (Closed): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 02:18 PM Bug #15532 (Closed): Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document change request in admin actions.Also the NONITAR module admin can able to modify/bypass the approvers from admin action for an ITAR document
- 02:09 PM Bug #15577 (Closed): Main2: Search PI is not working
- This issue is fixed so closing this issue in Cy-5 on 24.01.2020
- 02:05 PM Bug #15378 (Closed): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 02:03 PM Bug #15506 (Closed): In New Concern page, after selecting the supplier, the supplier part number field is not showing the parts that are linked to the selected supplier
- 02:02 PM Bug #15453 (Closed): Resource load across projects showing blank page
- But performance wise it takes time
- 02:00 PM Bug #15455 (Closed): Attach task from template - "Select deliverable" button can be view only after scrolling
- 02:00 PM Bug #15455 (Fixed with Hotfix): Attach task from template - "Select deliverable" button can be view only after scrolling
- Not seeing the scroll in Team 1 DB
- 10:59 AM Bug #15391 (Resolved): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 10:31 AM Bug #15560 (Closed): Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
01/23/2020
- 10:18 PM Bug #15563 (Resolved): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- 05:42 PM Bug #15563 (In Progress): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- 10:18 PM Bug #15570 (Resolved): TSR - Safety goal ID is not displayed in TSR Document
- 05:42 PM Bug #15570 (In Progress): TSR - Safety goal ID is not displayed in TSR Document
- 09:27 PM Bug #15524 (Resolved): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- as per discussion with sabu. Subsystem option is removed
- 12:29 PM Bug #15524 (Not Fixed with Hotfix): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- Part tree loaded by 'sub system' option is missing.find screen shot
- 09:24 PM Bug #15576 (Resolved): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- 12:02 PM Bug #15576 (Not Fixed with Hotfix): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- still part sync is not working
- 11:00 AM Bug #15576 (Resolved): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- 10:59 AM Bug #15576 (Open): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- 08:35 PM Bug #15571 (Resolved): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- 08:34 PM Bug #15467 (Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance
- Need to update Auditreport Folder name in 'Au_GetAuditApplicationInstance'
update Au_GetAuditApplicationInstance s... - 08:17 PM Bug #15520 (Resolved): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 05:41 PM Suggestion #15337 (Resolved): Bill of Material - Last Added and Added First can be Renamed as Last Added and First Added
- 05:41 PM Bug #15323 (Resolved): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 05:40 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 01:38 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 12:26 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 05:39 PM Bug #15509 (Resolved): Design and Process VDA - Step 7 takes more time to load.(16 Seconds)
- 05:35 PM Bug #15464 (Resolved): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- 03:44 PM Bug #15464 (Not Resolved): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- In above case two different datas are displayed. One is showing 2 and other one is showing 3
- 05:35 PM Bug #15436 (Resolved): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 02:00 PM Bug #15436 (Not Resolved): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- Refer the site : TCL1 having three BU. (B3,B4,B5)
- 12:26 PM Bug #15436 (Resolved): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 05:11 PM Bug #15531 (Fixed with Hotfix): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- 05:11 PM Bug #15531: New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- Verified and working fine as hot fix
- 04:50 PM Bug #15502 (Fixed with Hotfix): (Multi Date)Design and Process VDA - When the Date format is changed, Following issues occurs.(Refer Description)
- 04:43 PM Bug #15508 (Fixed with Hotfix): Design and Process VDA - Dates are not displayed as per Date format.(DD/MM/YYYY) (Refer Description)
- 04:03 PM Bug #15577 (Fixed with Hotfix): Main2: Search PI is not working
- 03:10 PM Bug #15577 (Resolved): Main2: Search PI is not working
- Fixed and patches provided for testing
- 02:13 PM Bug #15577 (Open): Main2: Search PI is not working
- 11:52 AM Bug #15577 (Closed): Main2: Search PI is not working
- In Main2, the Search PI is not working but its working in Main Menu. If we entered any PI Name and Click on Search Ic...
- 03:41 PM Bug #15527 (Resolved): TOC:When doing revision/deletion, Level tree should be displayed in LHS screen and the RHS should show action screen
- 03:40 PM Bug #15528 (Resolved): Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- 03:27 PM Bug #15431 (Closed): Report -> Audit - Repeat Non Conformance -> The graph is showing OFI data. Ex: Auditor identified one NC + One OFI by using same Non Conformity data"
- 03:10 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- again I am trying to replicate the issues but cant able to replicate the issues.
- 01:07 PM Bug #15394 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- 03:09 PM Bug #15364 (Resolved): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- again I am trying to replicate the issue but cant able to replicate the issues in the above description.
- 01:01 PM Bug #15364 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- 02:59 PM Bug #15512 (Resolved): Generate document URL is not working as expected, shows blank screen when pasting the URL. After sometime, it asks the user to open/Save in IE and opens the document in IE edge. NON ITAR user can view the ITAR document by using this link
- 02:44 PM Bug #15559 (Resolved): Tree Diagram: Edited requirement displayed outside the element Box
- Not ale to replicate
- 02:27 PM Bug #15390 (Not Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 12:26 PM Bug #15390 (Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 02:21 PM Bug #15383 (Resolved): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 01:05 PM Bug #15383 (Not Fixed with Hotfix): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 02:09 PM Bug #15461 (Closed): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- 12:26 PM Bug #15461 (Resolved): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- 02:04 PM Bug #15553: Multi langugage
- Issue 13: Resources allocation--> Label is not converted - Future
- 02:03 PM Bug #15553 (Resolved): Multi langugage
- Issue 1:Social Media--> Default layout--> Status for PM, BD, Spare part maintenance and Request status is not convert...
- 01:16 PM Bug #15418 (Not Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- Scheduled audit is not displayed (Scheduled / Deadline violated)
- 12:26 PM Bug #15418 (Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 12:18 PM Bug #15525 (Fixed with Hotfix): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- verified and working fine as hot fix
- 12:17 PM Bug #15529 (Fixed with Hotfix): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- verified and working fine as hot fix
- 12:16 PM Bug #15574 (Fixed with Hotfix): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- verified and working fine as hot fix
- 12:00 PM Bug #15548 (Fixed with Hotfix): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- verified and working fine as hot fix
- 11:59 AM Bug #15572: New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- #15571 relates to alignment issue also
- 11:41 AM Bug #15354 (Resolved): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 11:04 AM Bug #15537: Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- Not an issue...instance file is in read only
- 11:02 AM Bug #15537 (Resolved): Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- 11:03 AM Bug #15359 (Resolved): Multi site: Email->Email link is not redirecting to correct location
- 11:02 AM Bug #15566 (Resolved): Created a Escalation Route with special character given in the description field. in the listing it is showing as route name , description and site value incorrectly. Not able to open the route also for editing.
- 11:02 AM Bug #15342 (Resolved): Uppercase and lower case should be proper throughout site
- 10:53 AM Bug #15503 (Resolved): Folder Management: Without selecting ITAR route, it should not allow the user to save the folder if the user checks EDIT ITAR route checkbox. Show alert message instead of allowing to save
- 10:13 AM Bug #15560 (Resolved): Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
- Not an issue working as expected
- 10:13 AM Bug #15488 (Resolved): New document request:Alert message displayed when entering the doc name/num used in other levels. It should allow the user to continue, it should not allow the user to restrict
01/22/2020
- 09:26 PM Bug #15567 (Resolved): Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- 11:32 AM Bug #15567 (Open): Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- 09:13 PM Bug #15427 (Resolved): Actions: When a user tries to complete the Bias, Calibration, Calibration verification, Linearity, GRR and stability study through action screen, without entering the Approved and Remarks field it getting saved.
- 08:35 PM Bug #15506 (Resolved): In New Concern page, after selecting the supplier, the supplier part number field is not showing the parts that are linked to the selected supplier
- 07:38 PM Bug #15461 (In Progress): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- 07:38 PM Bug #15436 (In Progress): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- 07:38 PM Bug #15429 (In Progress): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 07:38 PM Bug #15418 (In Progress): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- 07:38 PM Bug #15390 (In Progress): Report -> Audit Repeat NC -> Various finding status is missing
- 07:36 PM Bug #15575 (Resolved): New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit status is not matched.find the screen shot
- 07:36 PM Bug #15575 (Open): New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit status is not matched.find the screen shot
- Not an issue.
It was the report at the time of publish. You can Verify Rev No also not changed in the Report. - 04:51 PM Bug #15575 (Closed): New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit status is not matched.find the screen shot
- New Cummins Report-Submit t auditee-Resubimit of completed audit-On clicking 'click to view report' button audit stat...
- 07:34 PM Bug #15542 (Resolved): New Cummins VAM Report->Audit Status->New report is not displayed in audit status .pls find screen shot
- Fixed. Kindly verify after applying Hot fixes/Next build
- 06:41 PM Bug #15545 (Fixed with Hotfix): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 11:27 AM Bug #15545 (Resolved): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 06:12 PM Bug #15574 (Resolved): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- 04:31 PM Bug #15574 (Open): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- 02:55 PM Bug #15574 (Closed): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot
- 06:10 PM Bug #15352 (Resolved): Master--> Able to save the master without entering the linearity initial schedule
- 06:10 PM Bug #15561 (Resolved): Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) approved label is not converted into Chinese and Spanish
- 11:32 AM Bug #15561 (Open): Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) approved label is not converted into Chinese and Spanish
- 05:58 PM Bug #15538 (Fixed with Hotfix): Email validation is not done during Supplier creation
- Verified
- 12:04 PM Bug #15538 (Resolved): Email validation is not done during Supplier creation
- 11:11 AM Bug #15538 (In Progress): Email validation is not done during Supplier creation
- 05:40 PM Bug #15514 (Fixed with Hotfix): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 11:26 AM Bug #15514 (Resolved): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 05:39 PM Bug #15265 (Fixed with Hotfix): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- Issue fixed and verified in cy 4
- 05:36 PM Bug #15552 (Fixed with Hotfix): On mouse hovering the production item, parent name is showing as "null".
- Issue Fixed
- 12:00 PM Bug #15552 (Resolved): On mouse hovering the production item, parent name is showing as "null".
- 11:11 AM Bug #15552 (In Progress): On mouse hovering the production item, parent name is showing as "null".
- 05:36 PM Bug #15576 (Closed): Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- Part master-part sync not working.When any new parts added in AQUA and syncing in part master screen it is not working
- 05:32 PM Bug #15540 (Resolved): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 05:31 PM Bug #15433 (Fixed with Hotfix): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- Fixed with Hotfix
- 12:53 PM Bug #15433 (Resolved): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- 11:39 AM Bug #15433 (Not Resolved): Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- 11:38 AM Bug #15433: Risk level-> Risk is displayed incorrect.it should show the corporate risk level
- Multi site:After set also, it is not showing.Ref screen shot.
- 05:30 PM Bug #15520 (In Progress): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description )
- 05:25 PM Bug #15326 (Closed): Copy location: Copy location is not working when "ppap" is checked
- 05:25 PM Bug #15326 (Yet to Verify): Copy location: Copy location is not working when "ppap" is checked
- Verified in build 4
- 12:21 PM Bug #15326 (Resolved): Copy location: Copy location is not working when "ppap" is checked
- 05:23 PM Bug #15471 (Resolved): VOC: While enter large word in VOC the alignment is not proper
- 05:16 PM Bug #15385 (Resolved): Utility Equipment: Need Equipment path details for Utility Equipment
- 05:15 PM Bug #15387 (Resolved): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- 04:43 PM Bug #15543 (Resolved): PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated(Requested yo delivered)
- 04:31 PM Bug #15571 (Open): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- 12:41 PM Bug #15571 (Closed): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment
- New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showin...
- 04:31 PM Bug #15569 (Open): Tooptip should be proper while hovering he icon
- 12:23 PM Bug #15569 (Closed): Tooptip should be proper while hovering he icon
- Risk level setup page.
Supplier page - 04:01 PM Bug #15544 (Resolved): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- 11:11 AM Bug #15544 (In Progress): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- 03:48 PM Bug #15394: Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- Able to replicate
- 03:37 PM Bug #15513 (Fixed with Hotfix): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 03:36 PM Bug #15457 (Fixed with Hotfix): Multi Site : Production scheduling : Operations added in Site A for a PI is displaying by default if the same PI is scheduled in Site 2
- 03:36 PM Bug #15408 (Fixed with Hotfix): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- 03:36 PM Bug #15565 (Resolved): Tree Diagram: Edited requirement with large data, failure and requirements are overlapped
- 11:32 AM Bug #15565 (Open): Tree Diagram: Edited requirement with large data, failure and requirements are overlapped
- 03:35 PM Bug #15378 (Fixed with Hotfix): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 03:32 PM Bug #15284 (Fixed with Hotfix): ShowStopper: Non-ITAR User can able to access the ITAR PI Documents
- 03:32 PM Bug #15292 (Fixed with Hotfix): NON-ITAR Users: Users can able to Copy and Paste the ITAR PI Segments
- 03:32 PM Bug #15517 (Fixed with Hotfix): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 03:25 PM Bug #15511 (Resolved): Batch Download: When the ITAR document is downloaded by ITAR user, then the NON ITAR module admin can view the ITAR documents in downloadable form. Same for stitch document
- 03:01 PM Bug #15572: New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- Duplicate Issue #:15571
- 02:55 PM Bug #15572 (Resolved): New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- 02:55 PM Bug #15572 (Open): New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- 12:51 PM Bug #15572 (Closed): New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- New Cummins Report-Export to PDF-Score section is not mapped with the original report.pls find screen shot
- 02:21 PM Bug #15546 (Resolved): TSR: While Adding functions in TSR the alignment is not proper
- 02:18 PM Bug #15570 (Open): TSR - Safety goal ID is not displayed in TSR Document
- 12:36 PM Bug #15570 (Closed): TSR - Safety goal ID is not displayed in TSR Document
- Safety goal ID is not displayed in TSR Document.
- 01:02 PM Bug #15342 (Not Resolved): Uppercase and lower case should be proper throughout site
- 01:01 PM Bug #15342: Uppercase and lower case should be proper throughout site
- 1) enable and disable should be proper. Enable and disable first letter should be small letter
2) Space between busi... - 12:57 PM Bug #15554 (Resolved): Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment
- 12:17 PM Bug #15493 (Resolved): Legend status not showing in https site
- 11:11 AM Bug #15493 (In Progress): Legend status not showing in https site
- 12:16 PM Bug #15558 (In Progress): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 11:32 AM Bug #15558 (Open): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- 12:14 PM Bug #15405 (Resolved): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- 12:08 PM Bug #15524 (Resolved): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- 11:11 AM Bug #15524 (In Progress): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- 12:06 PM Bug #15446 (Resolved): BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel
- 11:11 AM Bug #15446 (In Progress): BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel
- 12:05 PM Bug #15526 (Resolved): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- 11:11 AM Bug #15526 (In Progress): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- 12:04 PM Bug #15548 (Resolved): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- 11:11 AM Bug #15548 (In Progress): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- 12:00 PM Bug #15551 (Resolved): Need commodity,system and Subsystem field to be listed in the part details screen.
- 11:11 AM Bug #15551 (In Progress): Need commodity,system and Subsystem field to be listed in the part details screen.
- 11:48 AM Bug #15555 (Resolved): Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- 11:32 AM Bug #15555 (Open): Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- 11:43 AM Bug #15568 (Resolved): Server error is displayed while publishing the document Using Manufacturing Report
- 11:32 AM Bug #15568 (Open): Server error is displayed while publishing the document Using Manufacturing Report
- 11:39 AM Bug #15364: Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- Able to replicate the Issue in Cycle 4.
- 11:35 AM Bug #15536 (Fixed with Hotfix): Multi site: Risk level is not able to set because popup is missing
- Need to verify in next build.
- 11:32 AM Bug #15566 (Open): Created a Escalation Route with special character given in the description field. in the listing it is showing as route name , description and site value incorrectly. Not able to open the route also for editing.
- 11:32 AM Suggestion #15564 (Open): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- 11:32 AM Bug #15563 (Open): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- 11:32 AM Bug #15562 (Open): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized"
- 11:32 AM Bug #15560 (Open): Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
- 11:32 AM Bug #15559 (Open): Tree Diagram: Edited requirement displayed outside the element Box
- 11:28 AM Bug #15459 (Fixed with Hotfix): Effectiveness -> When Verified is no, below validation and effectiveness should be disable
- Verified as Hotfix
- 11:26 AM Bug #15534 (Fixed with Hotfix): Multi site: Supplier is not listing.Showstopper for multi site.
- Verified as Hot fix in build 4
- 11:22 AM Bug #15499 (Resolved): EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- not able to replicate
- 11:21 AM Bug #15550 (Fixed with Hotfix): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- Verified as hot fix
01/21/2020
- 08:23 PM Bug #15539 (Resolved): Block Diagram: color is not applied and its not working in Show Interface Type
- 07:49 PM Bug #15568 (Closed): Server error is displayed while publishing the document Using Manufacturing Report
- Server error is displayed while publishing the document (Manufacturing Report)
- 07:39 PM Bug #15567 (Closed): Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- Escalation mail: Escalation for Auditor to Close Out mail is generated after audit is closed out.
- 07:23 PM Bug #15464 (Yet to Verify): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 07:23 PM Bug #15431 (Yet to Verify): Report -> Audit - Repeat Non Conformance -> The graph is showing OFI data. Ex: Auditor identified one NC + One OFI by using same Non Conformity data"
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 07:21 PM Bug #14399 (Closed): Breakdown Work order: if the duration is exceeded for completing the BD WO, the escalation mail is not getting generated.
- 07:02 PM Bug #15432 (Closed): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- 07:01 PM Bug #15432: Auditee->After submit the car form , automatically form should close or else i can able to edit.
- Verified in Build 4
- 06:33 PM Bug #15566 (Closed): Created a Escalation Route with special character given in the description field. in the listing it is showing as route name , description and site value incorrectly. Not able to open the route also for editing.
- Created a Escalation Route with special character given in the description field. in the listing it is showing as rou...
- 06:32 PM Suggestion #15366 (Closed): PM Supervisor and PM Calendar(Equipment and Die) --> If user tries to draft the entered details, the system should not display the alert message to enter the actual date and time details.
- 06:31 PM Bug #15443: Report Issues : Please refer the description
- Adding few more Issues
Capture history : Save,Delete and Update not working
Checkpoint : After saving the report,... - 06:26 PM Bug #15451: Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 06:26 PM Bug #15451 (Yet to Verify): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection
- 06:25 PM Bug #15461 (Not Resolved): Report -> Repeat NC-> Multisite data's are not displayed for multisite users.
- 06:23 PM Bug #15565 (Closed): Tree Diagram: Edited requirement with large data, failure and requirements are overlapped
- When editing the requirements in tree diagram using right click options
And while entering the large data, the edi... - 06:16 PM Suggestion #15564 (Closed): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function
- 06:15 PM Bug #15436 (Not Resolved): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP)
- Error message is not displayed. But data is not displayed
- 06:12 PM Bug #15563 (Closed): FSR - After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not allowing to Allocate ASIL value
- After doing Add ASIL for the Parent Function and Clicking Reset button, System displays JS Error and thereafter not a...
- 06:05 PM Bug #15449 (Closed): Report -> Audit Schedule Adherence -> Error message displayed when try to view the report by using "Custom" as time period
- 06:03 PM Bug #15390 (Not Resolved): Report -> Audit Repeat NC -> Various finding status is missing
- 1. Deadline violated and closed out status is missing
- 05:51 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.
- 05:48 PM Bug #15480 (Closed): LPA: view Checklist score page displays blank though score value is available
- 05:39 PM Bug #15415 (Closed): Report -> Audit Schedule Adherence -> The entity filter is not showing the data based on site selection
- 05:36 PM Bug #15416 (Closed): Report -> Auditor Utilization -> Site filter has to display before entity filter like other reports
- 05:34 PM Bug #15422 (Yet to Verify): Report -> Auditor Utilization -> Wrong Count is displayed for an auditor utilized hrs
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 05:33 PM Bug #15423: Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #:15562)
- 05:13 PM Bug #15423 (Yet to Verify): Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove
- Unable to verify this issue in CY-4 since the report is not showing any data (Issue #: )
- 05:29 PM Bug #15499: EFC Tree: When flow down is done for two functions/Requirement/Failure for the same child element and clicking on Intend & Extend Arrow, functions/Requirement/Failure are duplicated.
- Not ale to replcate issues
- 05:28 PM Bug #15504 (Resolved): Route: On entering the existing route name and create a new route, system shows saved successfully and the new route screen shows the form w/o any data
- 05:20 PM Bug #15562 (Closed): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized"
- Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not...
- 05:19 PM Bug #15507 (Resolved): New Draft Request: By default draft requester should be the draft viewer. The draft viewer is not taken when selecting draft viewers and checked ITAR compliance and unchecked it and continue(pls check desc as well)
- 05:18 PM Bug #15413 (Closed): Imported Equipment from TPM is not listing in Audit pro where as after providing TPM rights to Audit pro User it is listing and still equipment list even after TPM rights are removed to Audit pro User
- 05:17 PM Bug #15521 (Resolved): Document Mgmt:For a particular folder FCPA, route link is not displayed
- 05:16 PM Bug #15522 (Resolved): Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown, but it shows assign by admin in doc mgmt route link dropdown
- 05:16 PM Bug #15523 (Resolved): ITAR document is going to NON ITAR Approver. PFB the scenario
- 05:15 PM Bug #15547 (Resolved): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 05:15 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- change the status to TBD
- 05:14 PM Bug #15557 (Closed): Checklist: While import the checklist, Session has expired
- Audit Topic not included in checklist template. After including this, checklist import is working
- 05:10 PM Bug #15557 (Resolved): Checklist: While import the checklist, Session has expired
- 05:10 PM Bug #15557 (Open): Checklist: While import the checklist, Session has expired
- Error in Excel Format. Not an issue
- 03:28 PM Bug #15557 (Closed): Checklist: While import the checklist, Session has expired
- Checklist: While import the checklist, Session has expired
- 05:12 PM Bug #15466 (Closed): Report -> Auditor Utilization -> Error message displayed when try to view the report by using "Custom" as time period
- Error message not displayed
- 05:12 PM Bug #15535 (Resolved): Document: GIF document is viewed as Image
- working as expected
- 05:11 PM Bug #15532 (Resolved): Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document change request in admin actions.Also the NONITAR module admin can able to modify/bypass the approvers from admin action for an ITAR document
- not an issue.can nor revoke admin access for itar
- 05:08 PM Bug #15533 (Resolved): Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to set the existing download name for newly downloaded documents
- not an issue working as expected
- 05:07 PM Bug #15418 (Not Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data
- Deadline audits are not displayed
- 05:05 PM Bug #15560: Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
- issue not clear
- 04:36 PM Bug #15560 (Closed): Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date getting generated in Batch manager.
- Email: when escalation route is having only NON ITAR user when publishing ITAR document mail for the particular date...
- 04:57 PM Bug #15561 (Closed): Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) approved label is not converted into Chinese and Spanish
- Issue 1: Multi language: All study(Bias, Calibration, Linearity, Calibration verification, GRR V & A and stability) a...
- 04:56 PM Bug #15519 (Resolved): EFC Tree: Function Flow down element is displayed in EFC Tree, When nothing is mapped on It
- 04:46 PM Bug #15414 (Closed): LPA : Layers->Auditor selection is displaying all the users in 1st layer but where as from Layer 2 on words displays as Users having to Access to auditors
- Verified in Sp_925 Cy-4 Build and closed
- 04:11 PM Bug #15559 (Closed): Tree Diagram: Edited requirement displayed outside the element Box
- > When editing the requirements in tree diagram using right click options
> And while entering the data on next li... - 04:02 PM Bug #15558 (Closed): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection
- Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for al...
- 03:48 PM Bug #15468 (Fixed with Hotfix): Audit Program -> Server error displayed when clicking on "delete" button
- 03:31 PM Bug #15410 (Closed): SP906.1 Hotfix -> SB-191110618 - Category and requested by field in perform audit
- 03:29 PM Bug #15382 (Resolved): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- 03:07 PM Bug #15383 (Resolved): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 01:57 PM Bug #15383 (In Progress): Process VDA - Failure Analysis - While adding large data for Effect and Cause from the master tables, the data is displayed outside the branch. (Refer Description)
- 03:02 PM Bug #15555 (Closed): Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- Docs from AQUA: Non ITAR user can able to delete the ITAR document which has been published from AQUA PRO
- 01:09 PM Bug #15550 (Resolved): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- 09:45 AM Bug #15550 (Open): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- 12:03 PM Bug #15545 (In Progress): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 11:51 AM Bug #15265 (Resolved): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- 09:45 AM Bug #15554 (Open): Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment
- 09:45 AM Bug #15553 (Open): Multi langugage
- 09:45 AM Bug #15552 (Open): On mouse hovering the production item, parent name is showing as "null".
- 09:45 AM Bug #15551 (Open): Need commodity,system and Subsystem field to be listed in the part details screen.
01/20/2020
- 09:09 PM Bug #15432 (Resolved): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- 03:33 PM Bug #15432 (Not Fixed with Hotfix): Auditee->After submit the car form , automatically form should close or else i can able to edit.
- not fixed in build
- 03:22 PM Bug #15432: Auditee->After submit the car form , automatically form should close or else i can able to edit.
- Still the issue occur
- 07:12 PM Bug #15502 (Resolved): (Multi Date)Design and Process VDA - When the Date format is changed, Following issues occurs.(Refer Description)
- 07:08 PM Bug #15391 (In Progress): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 02:22 PM Bug #15391 (Not Fixed with Hotfix): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- 02:21 PM Bug #15391: Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon
- Still the issue occur in build 4
- 07:03 PM Bug #15529 (Resolved): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- 01:14 PM Bug #15529 (Open): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- 07:02 PM Bug #15468 (Resolved): Audit Program -> Server error displayed when clicking on "delete" button
- 02:20 PM Bug #15468 (Not Fixed with Hotfix): Audit Program -> Server error displayed when clicking on "delete" button
- Still the issue occur in build 4
- 06:46 PM Bug #15554 (Closed): Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment
- Mutli Language: Production OEE--> Not able to complete the Production OEE for selected Equipment. It displays error m...
- 06:45 PM Bug #15531 (Resolved): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- 01:14 PM Bug #15531 (Open): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- 06:44 PM Bug #15553 (Closed): Multi langugage
- Issue 1:Social Media--> Default layout--> Status for PM, BD, Spare part maintenance and Request status is not convert...
- 05:22 PM Bug #15508 (Resolved): Design and Process VDA - Dates are not displayed as per Date format.(DD/MM/YYYY) (Refer Description)
- 05:21 PM Bug #15552 (Closed): On mouse hovering the production item, parent name is showing as "null".
- On mouse hovering the production item, parent name is showing as "null".
- 05:12 PM Bug #15551 (Closed): Need commodity,system and Subsystem field to be listed in the part details screen.
- Need commodity,system and Subsystem field to be listed in the part details screen.
- 05:05 PM Bug #15550 (Closed): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights)
- Remove the "view project" option in Audit Administrator(Access Rights)
- 04:10 PM Bug #15438 (Resolved): Even After mapping KPIs to the Dashboard, clicking on it not displays the reports related to it.
- 04:02 PM Bug #15530 (Resolved): New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to auditee" Issue2:not able to view in "Click to view report" and also
- 01:14 PM Bug #15530 (Open): New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to auditee" Issue2:not able to view in "Click to view report" and also
- 03:44 PM Bug #15548 (Open): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- 03:39 PM Bug #15548 (Closed): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot
- 03:44 PM Bug #15547 (Open): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- 03:32 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- IN AQUA pro module folder alone, the ITAR docs are visible to NON ITAR user, but when clicking on the doc, shows aler...
- 03:29 PM Bug #15547 (Closed): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process
- Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing...
- 03:44 PM Bug #15546 (Open): TSR: While Adding functions in TSR the alignment is not proper
- 03:25 PM Bug #15546 (Closed): TSR: While Adding functions in TSR the alignment is not proper
- TSR: While Adding functions in TSR the alignment is not proper
Refer Screenshot - 03:44 PM Bug #15545 (Open): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- 03:24 PM Bug #15545 (Closed): Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations in Inspection entry pop-up
- Inprocess Inspection : Inspection sheet is not opening correctly if the same Lot no is used with multi-operations
... - 03:44 PM Bug #15544 (Open): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- 02:57 PM Bug #15544 (Closed): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.
- 03:44 PM Bug #15543 (Open): PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated(Requested yo delivered)
- 01:31 PM Bug #15543 (Closed): PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated(Requested yo delivered)
- PM Supervisor Calendar-->Spare part usage--> Once the spare part requested, the status is not getting updated
- 03:43 PM Bug #15518 (Closed): Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
- 03:42 PM Bug #15518 (Fixed with Hotfix): Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
- 02:58 PM Bug #15518: Requirement Tree: When doing only function flow-down in requirement tree it displays wrong indicator
- Not anissues
- 03:42 PM Bug #15525 (Resolved): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- 01:14 PM Bug #15525 (Open): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- 03:42 PM Bug #15534 (Resolved): Multi site: Supplier is not listing.Showstopper for multi site.
- 01:14 PM Bug #15534 (Open): Multi site: Supplier is not listing.Showstopper for multi site.
- 12:04 PM Bug #15534 (Closed): Multi site: Supplier is not listing.Showstopper for multi site.
- Multi site: Supplier is not listing.Showstopper for multi site.
- 03:42 PM Bug #15536 (Resolved): Multi site: Risk level is not able to set because popup is missing
- it is not an issue when change the risk we show pop up. for initial setup we dont ask reason.
- 01:14 PM Bug #15536 (Open): Multi site: Risk level is not able to set because popup is missing
- 12:16 PM Bug #15536 (Closed): Multi site: Risk level is not able to set because popup is missing
- Multi site: Risk level is not able to set because popup is missing
- 03:14 PM Bug #15425 (Closed): Nc page-> While retrieve the NC details automatic the Attachment is displayed.
- Verified in build 4
- 03:13 PM Bug #13755 (Closed): Supplier contact person getting deleted instead of deactivating
- 03:12 PM Bug #15479 (Not Fixed with Hotfix): Project/ Program Unarchive is not working.
- 02:28 PM Bug #15228 (Closed): When trying to use View Source File of a ZIP file, it is renaming the file extension as PDF.
- Removed the view source file option for ZIP file type. Discussed with Sabu as well.CLosing the issue
- 02:22 PM Bug #15419 (Closed): Actual Audit-> Auditee name is not displayed properly
- Working fine in this build
- 01:23 PM Bug #15462 (Closed): Social Media: Planned Maintenance Extract pop up window--> Sort as ascending order--> When a supervisor tires to complete the workorder and clicking on ok button, it displays "server error"
- 01:14 PM Bug #15542 (Open): New Cummins VAM Report->Audit Status->New report is not displayed in audit status .pls find screen shot
- 01:00 PM Bug #15542 (Closed): New Cummins VAM Report->Audit Status->New report is not displayed in audit status .pls find screen shot
- New Cummins VAM Report->Audit Status->New report is not displayed in audit status
- 01:14 PM Bug #15540 (Open): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- 12:40 PM Bug #15540 (Closed): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details
- Plant Configuration(Import): When tries to import the Utility type details, it showing error message. - Closed
- 01:14 PM Bug #15539 (Open): Block Diagram: color is not applied and its not working in Show Interface Type
- 12:39 PM Bug #15539 (Closed): Block Diagram: color is not applied and its not working in Show Interface Type
- Block Diagram: color is not applied and its not working in Show Interface Type
- 01:14 PM Bug #15538 (Open): Email validation is not done during Supplier creation
- 12:36 PM Bug #15538 (Closed): Email validation is not done during Supplier creation
- Email validation is not done during Supplier creation
1.Accepting invalid email id for the primary and secondary ema... - 01:14 PM Bug #15537 (Open): Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- 12:31 PM Bug #15537 (Closed): Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert
- 01:14 PM Bug #15535 (Open): Document: GIF document is viewed as Image
- 12:13 PM Bug #15535 (Closed): Document: GIF document is viewed as Image
- Document: GIF document is viewed as Image
- 01:14 PM Bug #15533 (Open): Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to set the existing download name for newly downloaded documents
- 01:14 PM Bug #15532 (Open): Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document change request in admin actions.Also the NONITAR module admin can able to modify/bypass the approvers from admin action for an ITAR document
- 01:14 PM Bug #15528 (Open): Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- 01:14 PM Bug #15527 (Open): TOC:When doing revision/deletion, Level tree should be displayed in LHS screen and the RHS should show action screen
- 01:14 PM Bug #15526 (Open): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- 01:14 PM Bug #15524 (Open): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- 01:14 PM Bug #15523 (Open): ITAR document is going to NON ITAR Approver. PFB the scenario
- 01:14 PM Bug #15522 (Open): Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown, but it shows assign by admin in doc mgmt route link dropdown
- 01:14 PM Bug #15521 (Open): Document Mgmt:For a particular folder FCPA, route link is not displayed
- 01:14 PM Bug #15512 (Open): Generate document URL is not working as expected, shows blank screen when pasting the URL. After sometime, it asks the user to open/Save in IE and opens the document in IE edge. NON ITAR user can view the ITAR document by using this link
- 01:14 PM Bug #15511 (Open): Batch Download: When the ITAR document is downloaded by ITAR user, then the NON ITAR module admin can view the ITAR documents in downloadable form. Same for stitch document
- 01:14 PM Bug #15507 (Open): New Draft Request: By default draft requester should be the draft viewer. The draft viewer is not taken when selecting draft viewers and checked ITAR compliance and unchecked it and continue(pls check desc as well)
- 01:14 PM Bug #15506 (Open): In New Concern page, after selecting the supplier, the supplier part number field is not showing the parts that are linked to the selected supplier
- 01:14 PM Bug #15503 (Open): Folder Management: Without selecting ITAR route, it should not allow the user to save the folder if the user checks EDIT ITAR route checkbox. Show alert message instead of allowing to save
- 01:00 PM Bug #15265 (Not Resolved): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM
- Remove Supplier prefix
- 12:59 PM Bug #15405 (Not Resolved): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size
- 12:58 PM Suggestion #15361 (Closed): Die: Cavity--> Need "Select" option as default
- 12:57 PM Bug #15385 (Not Resolved): Utility Equipment: Need Equipment path details for Utility Equipment
- 12:55 PM Suggestion #15386 (Closed): Equipment part and Die linkage: No need to displays the Non manufacturing line details in Equipment part and Equipment part die Linkage menu
- 12:44 PM Bug #15323 (In Progress): BOM: When selecting descending or Added first the alignment line of the BOM is broken or not proper
- 12:44 PM Bug #15382 (In Progress): Block Diagram: Internal Element is displayed as External while de-selecting In-scope checkbox and again selecting it.
- 12:36 PM Bug #15394: Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message
- Not able to replicate
- 12:36 PM Bug #15452 (Closed): Supplier listing screen : when the user is not having the supplier module admin rights then do not display all the supplier to the users assigned in the groups.
- VERIFIED FROM PPAP TEAM
- 12:30 PM Bug #15387 (Not Resolved): Equipment and Die Skill Matrix : No proper Alignment in Trade and skill matrix field, so unable to view the Resources skill level details
- 12:27 PM Bug #15388 (Closed): Problem Master: Root Cause category sorting is not working as expected.
- 11:49 AM Bug #15354 (Reopen): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message
- 11:16 AM Bug #15497 (Resolved): Process VDA - Failure Analysis - While performing Skip Level Flow down it duplicates the Element
- 10:41 AM Bug #15364 (Resolved): Process VDA - Functional/Failure Analysis - After creating a new FourM for an operation in Structure Analysis Functional/Failure Analysis page is not loading
- in our discussion its not replicating and also need it occurs in some situation.we need to catch the scenario
01/17/2020
- 10:39 PM Bug #15443 (Resolved): Report Issues : Please refer the description
- 10:37 PM Bug #15443 (In Progress): Report Issues : Please refer the description
- 10:39 PM Bug #15378 (Resolved): Charts : Need to display the selected chart by-default while opening the chart from context menu
- 10:25 PM Bug #15514 (In Progress): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 10:25 PM Bug #15514 (Open): Inprocess Inspection :If multi-operations are selected Operations and characteristics mapped in Inspection sheet is incorrect form what actually mapped in Control plan
- 09:17 PM Bug #15517 (Resolved): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 09:16 PM Bug #15517 (Open): Inspection entry form : Wrong Alert is displayed even if the operation is selected instead of "select" option
- 07:01 PM Bug #15292 (Resolved): NON-ITAR Users: Users can able to Copy and Paste the ITAR PI Segments
- 07:01 PM Bug #15284 (Resolved): ShowStopper: Non-ITAR User can able to access the ITAR PI Documents
- 05:32 PM Bug #15533 (Closed): Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to set the existing download name for newly downloaded documents
- Batch Download in TOC: Batch download list name and stitch doc name should be unique. Should not allow the user to se...
- 05:09 PM Bug #15532 (Closed): Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document change request in admin actions.Also the NONITAR module admin can able to modify/bypass the approvers from admin action for an ITAR document
- Draft to Document Change request: NON ITAR module admin can publish the ITAR document via ITAR draft to document chan...
- 04:05 PM Bug #15531 (Closed): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option
- 04:04 PM Bug #15530 (Closed): New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to auditee" Issue2:not able to view in "Click to view report" and also
- New Cummins VAM Report-> Issue 1:Detailed entered in Publish report not able to view again on clicking "Submit to aud...
- 04:01 PM Bug #15529 (Closed): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font
- 03:34 PM Bug #15528 (Closed): Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- Admin Actions: Non ITAR user can download the ITAR document from Pending requests action
- 03:25 PM Bug #15527 (Closed): TOC:When doing revision/deletion, Level tree should be displayed in LHS screen and the RHS should show action screen
- When doing a change request from Search Result Page, after completion it re-directs to Actions page. The user is plan...
- 03:04 PM Bug #15408 (Resolved): Charts : Sample values entered for all variable characteristics are displayed in the charts, should display corresponding to each characteristics
- 03:03 PM Bug #15526 (Closed): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again
- when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need ...
- 03:03 PM Bug #15525 (Closed): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section
- 03:01 PM Bug #15524 (Closed): Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- Supplier->Add part->Part tree loaded by system/sub system->Empty icon for parts is displaying
- 03:00 PM Bug #15246 (Closed): There is no status(color) for tentative VAM audit once it is scheduled
- Working fine in CY4 925
- 03:00 PM Bug #15241 (Closed): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist
- Working fine in CY4 925
- 03:00 PM Bug #15240 (Closed): Risk value double digit not accepting
- Working fine in CY4 925
- 03:00 PM Bug #15257 (Closed): Supplier Template-Empty checkbox is listing (UI issue).Refer screen shot
- Working fine in CY4 925
- 02:59 PM Bug #15262 (Closed): Unable to add part as no add button is showing even after specifying all necessary details in supplier creation(imported supplier)
- Working fine in CY4 925
- 02:58 PM Bug #15278 (Closed): SAM audit-Audit status showing No NC by default though NC's has raised
- Working fine in CY4 925
- 02:58 PM Bug #15319 (Closed): Menu:Unwanted menus is displayed when user has only module access.
- Working fine in CY4 925
- 02:58 PM Bug #15472 (Resolved): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying
- 02:57 PM Bug #15326 (Not Resolved): Copy location: Copy location is not working when "ppap" is checked
- issue reproducible in CY4 925,hence reopening this issue
- 02:57 PM Bug #15513 (Resolved): Inprocess Inspection sheet : Cp and Pp Values are not displaying in form
- 02:53 PM Bug #15357 (Closed): Import : Secondary Email address column is needed.
- Working fine in CY4 925
- 02:53 PM Bug #15392 (Closed): Part master-System and Subsystem against with commodity not loaded properly
- Working fine in CY4 925
- 02:53 PM Bug #15395 (Closed): No "Add" part button is available if secondary email ID for a supplier is specified
- Working fine in CY4 925
- 02:52 PM Bug #15396 (Closed): Secondary email ID has not saved while creating supplier or for an imported supplier
- Working fine in CY4 925
- 02:52 PM Bug #15401 (Closed): Unable to schedule VEM event audit.Clicking on Save&Add button no action.
- Working fine in CY4 925
- 02:50 PM Bug #15434 (Closed): Supplier-> Inner name and outer name does not match. Inside it is displayed as RFT Attachment
- Working fine in CY4 925
- 02:49 PM Bug #15435 (Closed): Supplier-> Delete option is not working in attachment
- Working fine in CY4 925.no del option instead single selection and attachment is allowed .can be override with new file
- 02:49 PM Bug #15437 (Closed): Supplier-> Site need to displayed in history and space between risk and level
- Working fine in CY4 925
- 02:48 PM Bug #15439 (Closed): Spelling mistake in supplier page
- Working fine in CY4 925
- 02:46 PM Bug #15442 (Closed): Supplier-> Search and deactivate is not working
- Working fine in CY4 925
- 02:46 PM Bug #15445 (Closed): Supplier Status Change History Report-> Order is incorrect in export excel.
- Working fine in CY4 925
- 02:43 PM Bug #15450 (Closed): Audit Validity Report->Blank page is displayed, when click the export button in Audit Validity Report.
- Working fine in CY4 925
- 01:05 PM Bug #15523 (Closed): ITAR document is going to NON ITAR Approver. PFB the scenario
- ITAR document is going to NON ITAR Approver. PFB the scenario
- 12:49 PM Bug #15522 (Closed): Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown, but it shows assign by admin in doc mgmt route link dropdown
- Folder and Doc Mgmt ITAR route: There is no route called "Assign by admin" in folder mgmt in edit itar route dropdown...
- 12:43 PM Bug #15521 (Closed): Document Mgmt:For a particular folder FCPA, route link is not displayed
- Document Mgmt:For a particular folder FCPA, route link is not displayed
Also available in: Atom