Activity
From 01/19/2021 to 02/17/2021
02/17/2021
- 07:12 PM Bug #21685 (Resolved): 10.6.0->Planned audit -> Application error is displayed, while clicking on the publish button
- 10.6.0-> Planned audit -> Application error is displayed, while clicking on the publish button
- 07:07 PM Bug #21684 (Fixed with Hotfix): 10.6.0-> Audit criteria field need to display below the auditee. Default Auditee select should be corporate
- 10.6.0-> Audit criteria field need to display below the auditee. Default Auditee select should be corporate
- 06:56 PM Bug #21683 (Resolved): 10.6.0-> Direct adhoc audit is not working.
- 10.6.0-> Direct adhoc audit is not working.
- 06:50 PM Bug #21682 (Resolved): 10.6.0->List view -> List view page is not loading .
- List view -> List view page is not loading .
- 03:37 PM Bug #21680 (Closed): R8 Requirement--> Some of the Email get interrupted. So unable to verify the daily basis mail
- R8 Requirement--> Some of the Email get interrupted. So unable to verify the daily basis mail
- 03:20 PM Bug #21679 (Closed): R7-->GRR Attribute--> the defect type which entered in first column is updating in all the fields
- Issue 1: R7-->GRR Attribute--> the defect type which entered in the first column is updated in all the fields
Issu... - 12:47 PM Bug #21656 (Not Fixed with Hotfix): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- 12:47 PM Bug #21656 (Fixed with Hotfix): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- Not working as expected
- 12:46 PM Bug #21653: After Fixing Bug # 21404 -> LPA Excuse Performance -> All chart except Plant Wise chart -> The data of chart and tabular representation is not same
- Data is not displaying for Cancel audits
- 12:45 PM Bug #21653 (Fixed with Hotfix): After Fixing Bug # 21404 -> LPA Excuse Performance -> All chart except Plant Wise chart -> The data of chart and tabular representation is not same
- 12:44 PM Bug #21652 (Not Fixed with Hotfix): After Fixing Bug # 21404 -> LPA Excuse Performance -> Equipment and Equipment type wise chart is not showing the cancel audit count if layer have multiple equipments
- 12:43 PM Bug #21652 (Fixed with Hotfix): After Fixing Bug # 21404 -> LPA Excuse Performance -> Equipment and Equipment type wise chart is not showing the cancel audit count if layer have multiple equipments
- Cancelled audit is not displaying now.
- 12:43 PM Bug #21651 (Not Fixed with Hotfix): After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> There is no representation about charts like Total count , and for other status "Cancelled / Rescheduled / Reassigned"
- 12:43 PM Bug #21651 (Fixed with Hotfix): After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> There is no representation about charts like Total count , and for other status "Cancelled / Rescheduled / Reassigned"
- 12:41 PM Bug #21650 (Fixed with Hotfix): After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> Total no of Scheduled audit field should display all scheduled audits. Now its showing based on Category (Cancel / reassign/reschedule)
- 12:41 PM Bug #21649 (Fixed with Hotfix): After Fixing Bug #21412 -> LPA Excuse Report -> Chart : Auditor Wise : Chart count and tabular count is not same
- 12:37 PM Bug #21618 (Fixed with Hotfix): Excuse Reports Filters -> As per cummins lpa findings report, Equipment Category has to display along with Equipment, Code and type
- 12:29 PM Bug #21616 (Fixed with Hotfix): All LPA Reports -> Based on status,Year and month the data's are not filtered
- 12:25 PM Bug #21516 (Not Fixed with Hotfix): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- 12:25 PM Bug #21516 (Fixed with Hotfix): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- 12:14 PM Bug #21450 (Fixed with Hotfix): Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- 12:10 PM Bug #21448 (Fixed with Hotfix): LPA_Findings Classification Summary / Findings Closure Summary / LPA Findings Summary : 1. Finding aging should be displayed as per below. 0-15 15-30 30-45 … Now its showing 1-15
- 12:02 PM Bug #21440 (Not Fixed with Hotfix): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 12:01 PM Bug #21440 (Fixed with Hotfix): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 11:54 AM Bug #21436 (Not Fixed with Hotfix): After Fixing Bug #21433 -> Duplicate records are displayed in Department Filter for all LPA new reports
- 11:54 AM Bug #21436 (Fixed with Hotfix): After Fixing Bug #21433 -> Duplicate records are displayed in Department Filter for all LPA new reports
- 02:35 AM Bug #21436 (Fixed in Dev): After Fixing Bug #21433 -> Duplicate records are displayed in Department Filter for all LPA new reports
- 11:52 AM Bug #21416 (Fixed with Hotfix): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- 11:46 AM Bug #21413 (Not Fixed with Hotfix): LPA NC Closure (Old) - Tabular View is not showing as per requirement. Equipment's should be displayed as column wise and Other fields should be displayed as Row Wise
- Chart is not displaying to check this issue.
- 11:46 AM Bug #21413 (Fixed with Hotfix): LPA NC Closure (Old) - Tabular View is not showing as per requirement. Equipment's should be displayed as column wise and Other fields should be displayed as Row Wise
- 11:45 AM Bug #21399 (Closed): LPA Findings Summary & Classification & Closure Summary Report : Problem on drill the chart on Process wise NC/OFI and Department wise NC/OFI
- 11:45 AM Bug #21399 (Resolved): LPA Findings Summary & Classification & Closure Summary Report : Problem on drill the chart on Process wise NC/OFI and Department wise NC/OFI
- 11:43 AM Bug #21273 (Not Fixed with Hotfix): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- a. Based on Equipment Type , Equipments list should show the data - Not done
b. Based on equipmet, layers checklist ... - 11:42 AM Bug #21273 (Fixed with Hotfix): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- 02:35 AM Bug #21273 (Fixed in Dev): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- 11:36 AM Bug #21272 (Fixed with Hotfix): LPA Findings Closure : Filter – Equipment Category : Duplicate Records are displayed
- 02:35 AM Bug #21272 (Fixed in Dev): LPA Findings Closure : Filter – Equipment Category : Duplicate Records are displayed
- 10:52 AM Bug #21673 (Open): R7->Response field display " Part2 column is missing" alert if delete the existing part value which is not mandatory for current import gage RR study .->Please refer Screenshot and Excel
- 10:52 AM Bug #21667 (Open): Header label spelling mistake for the following field "Gage Status, MSA Group name, Due date"
- 10:52 AM Bug #21665 (Open): R7->Multiparameter-->Out of three parameter ,only two parameter data is updating & one parameter data is not updating in study screen->Please refer imported file
- 10:52 AM Bug #21654 (Open): R8-->Email--> The due date is showing wrong for the gage which is having multiple group
- 10:52 AM Bug #21641 (Open): Email--> Email generating for the Inactive gage also
- 10:52 AM Bug #21602 (Open): Requirement 7-> In chart screen Anova table doesn't showing data. Please refer screenshot
- 10:52 AM Usability #21582 (Open): Requirement 7->If try to import the data when study is in "Pending closeout status" then the data in study screen automatically show the calculated value as well as save the imported data details without clicking on calculate and save button.
- 10:52 AM Bug #21567 (Open): Classification master menu: on saving the classification name by giving space character as an input, system close the popup and shows alert message to enter the data(common for all 3 master)
- 10:52 AM Bug #21563 (Open): Document Template: Without having options for checkbox,select,multi select and radio button, the element should not be saved. Due to that i cant able to close the additional info popup in new document request
- 10:52 AM Bug #21526 (Open): Requirement 7->Need to restrict to adding extra column and more gage number in single sheet
- 10:52 AM Bug #21511 (Open): Requirement 7-> Appraiser code does not matching with parts->Please refer description
- 10:52 AM Bug #21507 (Open): Requirement R7--> Multi parameter import is not working properly. Kindly refer the excel sheet
- 10:52 AM Bug #21506 (Open): Requirement R7--> GRR Study --> If part variation is Yes--> The data entry field is not showing in the right side of the screen. Refer screenshot(Verified in cascade db)
- 10:52 AM Bug #21502 (Open): Document template:Remove the heading and show the breadcrumb alone. Rename the edit concern to Document Template
- 10:52 AM Bug #21499 (Open): ToC: Change request: Deletion request: No need to show the additional fields
- 10:52 AM Bug #21498 (Open): ToC: Change request: Additional fields: Data is not fetched from the current revision . It asks the user to provide info to all fields again
- 10:52 AM Bug #21497 (Open): ToC:Change request: Need to remove the origin date in the top part since its been added in addition info part
- 10:52 AM Bug #21496 (Open): Retention period in master screen: Year and month should be in plural form. Done button in the retention period popup needs to show in minimized view
- 10:52 AM Bug #21495 (Open): Category master screen: All columns: Need to implement wrap text if the data has more number of characters
- 10:52 AM Bug #21489 (Open): New document request:Table under reason for req after docs publish: Keep the status column in the right most end
- 10:52 AM Bug #21488 (Open): New document request: Additional information link color should match with the mandatory alert message color. Need to navigate to additional info link automatically when closing the alert message if possible
- 10:52 AM Bug #21487 (Open): New document request: Additional info link popup: By default close icon is not displayed
- 10:52 AM Bug #21484 (Open): Doc Pro Settings: Provide one business rule to on and off the additional info for the doc
- 10:52 AM Bug #21373 (Open): R2, R3,R4, R5 and R6 Requirement --> For GRR no need to display the inactive, lost, out for repair, In calibration, Pending for calibration, obselete, replace status into the link. We have to display only the active status
- 10:52 AM Bug #21367 (Open): Draft Request Needing Viewing: Attachment- Clicking on send after attaching attachment(before loading) it listing as a blank comment in the comment section
- 10:52 AM Bug #21355 (Open): New Doc Request - While uploading documents there is no loading symbol
- 10:52 AM Bug #21331 (Open): New Document Draft : The Attach Doc and Reference attachment choose field alignment is not proper
- 10:52 AM Bug #21324 (Open): R2 Requirement --> Copy gage --> When user tries to copy gage the data, the data of Key device and assurance factory should not display for newly creating screen
- 10:52 AM Bug #21322 (Open): R2 Requirement --> Gage No CEE-474) -->(Both variable and Attribute) The GRR date is showing wrongly, here it is showing as 4/26/2019. In study it showing like "4/18/2019".
- 10:52 AM Bug #21264 (Open): Retention Period: Others text should be mandatory. Without entering text for others option, its saving null
- 10:52 AM Bug #21263 (Open): New document request: Master details: Once selecting the value from the dropdown, its not closed automatically(all3 master
- 10:52 AM Bug #21262 (Open): Classification,category and mgmt sys master: Accordian is not working as expected. Category master grid is showing even the user clicks the mgmt sys master
- 10:52 AM Bug #21261 (Open): Category Master: Retention period is showing by default, but when its been edited and saved its not showing by default. The user needs to click and see the details
- 10:52 AM Bug #21258 (Open): Retention period popup is goin somewhere when trying to drag and drop
- 10:52 AM Bug #21219 (Open): PDF Template: Sample PDF Preference displays blank page
- 10:52 AM Bug #21119 (Open): When clicking on continue button while doing a change request the system gets freeze and throwing a Page unresponsive alert
- 10:52 AM Bug #21118 (Open): Error Occurs on viewing the document
- 10:52 AM Bug #20987 (Open): Responsible person for Audit report Publish : Separate email notification is required to responsible person saying you have been assign as Responsible person for the following audit
02/16/2021
- 08:54 PM Bug #21399 (Fixed in Dev): LPA Findings Summary & Classification & Closure Summary Report : Problem on drill the chart on Process wise NC/OFI and Department wise NC/OFI
- Repeat issue - Bug #21287
- 07:39 PM Bug #21673 (Closed): R7->Response field display " Part2 column is missing" alert if delete the existing part value which is not mandatory for current import gage RR study .->Please refer Screenshot and Excel
- 07:18 PM Bug #21450 (Fixed in Dev): Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- 05:32 PM Bug #21616 (Fixed in Dev): All LPA Reports -> Based on status,Year and month the data's are not filtered
- 02:19 PM Bug #21413 (Fixed in Dev): LPA NC Closure (Old) - Tabular View is not showing as per requirement. Equipment's should be displayed as column wise and Other fields should be displayed as Row Wise
- As discussed with Bijoy, It is given based on consistency of all reports
- 02:17 PM Bug #21416 (Fixed in Dev): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- 02:14 PM Bug #21440 (Fixed in Dev): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 02:13 PM Bug #21443 (Fixed in Dev): All LPA New Reports - Manually identified NC and OFI count and Correction and closed out by auditor count (Manually Identified) is not displayed in report
- As discussed with Bijoy this scenario wont appear.
- 02:10 PM Bug #21453 (Fixed in Dev): All LPA New Reports - In chart View -> No need to show the count 0 as text if respective tabular data is 0
- As discussed with Bijoy, its ok to show 0 since chart wont be avail and causes confusion to user.
- 02:05 PM Bug #21516 (Fixed in Dev): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- 02:03 PM Bug #21618 (Fixed in Dev): Excuse Reports Filters -> As per cummins lpa findings report, Equipment Category has to display along with Equipment, Code and type
- 02:03 PM Bug #21649 (Fixed in Dev): After Fixing Bug #21412 -> LPA Excuse Report -> Chart : Auditor Wise : Chart count and tabular count is not same
- 01:54 PM Bug #21650 (Fixed in Dev): After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> Total no of Scheduled audit field should display all scheduled audits. Now its showing based on Category (Cancel / reassign/reschedule)
- 01:53 PM Bug #21651 (Fixed in Dev): After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> There is no representation about charts like Total count , and for other status "Cancelled / Rescheduled / Reassigned"
- 01:53 PM Bug #21653 (Fixed in Dev): After Fixing Bug # 21404 -> LPA Excuse Performance -> All chart except Plant Wise chart -> The data of chart and tabular representation is not same
- 01:52 PM Bug #21652 (Fixed in Dev): After Fixing Bug # 21404 -> LPA Excuse Performance -> Equipment and Equipment type wise chart is not showing the cancel audit count if layer have multiple equipments
- 01:36 PM Bug #21656 (Fixed in Dev): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- 01:36 PM Bug #21667 (Closed): Header label spelling mistake for the following field "Gage Status, MSA Group name, Due date"
- Header label spelling mistake for the following field "Gage Status, MSA Group name, Due date"
- 01:33 PM Bug #21448 (Fixed in Dev): LPA_Findings Classification Summary / Findings Closure Summary / LPA Findings Summary : 1. Finding aging should be displayed as per below. 0-15 15-30 30-45 … Now its showing 1-15
- 12:08 PM Bug #21665 (Closed): R7->Multiparameter-->Out of three parameter ,only two parameter data is updating & one parameter data is not updating in study screen->Please refer imported file
02/12/2021
- 08:30 PM Bug #21656 (Open): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- 06:27 PM Bug #21656 (Closed): After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of conformance data is not showing correctly
- After Fixing Bug #21415 -> LPA Conformance by area -> Chart -> No of Checkpoint / No of check points Ok / % of confor...
- 08:30 PM Bug #21653 (Open): After Fixing Bug # 21404 -> LPA Excuse Performance -> All chart except Plant Wise chart -> The data of chart and tabular representation is not same
- 04:47 PM Bug #21653 (Closed): After Fixing Bug # 21404 -> LPA Excuse Performance -> All chart except Plant Wise chart -> The data of chart and tabular representation is not same
- After Fixing Bug # 21404 -> LPA Excuse Performance -> All chart except Plant Wise chart -> The data of chart and tab...
- 08:30 PM Bug #21652 (Open): After Fixing Bug # 21404 -> LPA Excuse Performance -> Equipment and Equipment type wise chart is not showing the cancel audit count if layer have multiple equipments
- 04:42 PM Bug #21652 (Closed): After Fixing Bug # 21404 -> LPA Excuse Performance -> Equipment and Equipment type wise chart is not showing the cancel audit count if layer have multiple equipments
- After Fixing Bug # 21404 -> LPA Excuse Performance -> Equipment and Equipment type wise chart is not showing the canc...
- 08:30 PM Bug #21651 (Open): After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> There is no representation about charts like Total count , and for other status "Cancelled / Rescheduled / Reassigned"
- 04:24 PM Bug #21651 (Closed): After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> There is no representation about charts like Total count , and for other status "Cancelled / Rescheduled / Reassigned"
- After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> There is no representation about charts l...
- 08:30 PM Bug #21650 (Open): After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> Total no of Scheduled audit field should display all scheduled audits. Now its showing based on Category (Cancel / reassign/reschedule)
- 04:17 PM Bug #21650 (Closed): After Fixing Bug # 21404,21412 -> LPA Excuse Performance & Excuse Report -> Total no of Scheduled audit field should display all scheduled audits. Now its showing based on Category (Cancel / reassign/reschedule)
- LPA Excuse Performance & Excuse Report -> Total no of Scheduled audit field should display all scheduled audits. Now ...
- 08:30 PM Bug #21649 (Open): After Fixing Bug #21412 -> LPA Excuse Report -> Chart : Auditor Wise : Chart count and tabular count is not same
- 04:13 PM Bug #21649 (Closed): After Fixing Bug #21412 -> LPA Excuse Report -> Chart : Auditor Wise : Chart count and tabular count is not same
- After Fixing Bug #21412 -> LPA Excuse Report -> Chart : Auditor Wise : Chart count and tabular count is not same
- 05:13 PM Bug #21654 (Closed): R8-->Email--> The due date is showing wrong for the gage which is having multiple group
- R8-->Email--> The due date is showing wrong for the gage which is having multiple group
- 04:12 PM Bug #21516 (Not Fixed with Hotfix): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- LPA Excuse Report -> This report is not displaying the Rescheduled count in chart and tabular
- 01:12 PM Bug #21516 (Fixed with Hotfix): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- 02:43 AM Bug #21516 (Fixed in Dev): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- 04:08 PM Bug #21515 (Not Fixed with Hotfix): LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields
- A. LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields - Multisite is not wo...
- 01:14 PM Bug #21515 (Fixed with Hotfix): LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields
- 02:43 AM Bug #21515 (Fixed in Dev): LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields
- 01:28 PM Bug #21417 (Fixed with Hotfix): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- 01:25 PM Bug #21417 (Fixed in Dev): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- 01:17 PM Bug #21288 (Not Fixed with Hotfix): Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- LPA Findings Report - Menu Has to remove - Not Done
LPA Findings Classification - Menu Has to remove - Not Done - 01:17 PM Bug #21288 (Fixed with Hotfix): Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- 01:13 PM Bug #21618 (Not Fixed with Hotfix): Excuse Reports Filters -> As per cummins lpa findings report, Equipment Category has to display along with Equipment, Code and type
- 01:13 PM Bug #21618 (Fixed with Hotfix): Excuse Reports Filters -> As per cummins lpa findings report, Equipment Category has to display along with Equipment, Code and type
- 02:43 AM Bug #21618 (Fixed in Dev): Excuse Reports Filters -> As per cummins lpa findings report, Equipment Category has to display along with Equipment, Code and type
- 01:11 PM Bug #21412 (Fixed with Hotfix): LPA Excuse Report is showing 0 data's though datas are available
- 02:43 AM Bug #21412 (Fixed in Dev): LPA Excuse Report is showing 0 data's though datas are available
- 01:11 PM Bug #21406 (Fixed with Hotfix): LPA Excuse Performance -> Data's are not displaying for some columns in tabular view on bottom of the report
- 02:43 AM Bug #21406 (Fixed in Dev): LPA Excuse Performance -> Data's are not displaying for some columns in tabular view on bottom of the report
- 12:51 PM Bug #21429 (Fixed with Hotfix): LPA Repeat NC & OFI -> Label Changes in Tabular View
- 03:01 AM Bug #21429 (Fixed in Dev): LPA Repeat NC & OFI -> Label Changes in Tabular View
- 12:50 PM Bug #21641 (Closed): Email--> Email generating for the Inactive gage also
- Email--> Email generating for the Inactive gage also
- 12:43 PM Bug #21459 (Fixed with Hotfix): All LPA New Reports - Filters -> Process / Department / Failure Category :: "Data Not Found" option is need to filter the data since the these are optional fields in application
- 02:55 AM Bug #21459 (Fixed in Dev): All LPA New Reports - Filters -> Process / Department / Failure Category :: "Data Not Found" option is need to filter the data since the these are optional fields in application
- 12:10 PM Bug #21426 (Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status for Completed and Deadline violated and completed
- 11:50 AM Bug #21425 (Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion Date -> Time is not showing correctly
- 11:49 AM Bug #21422 (Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multiple data's
- 11:46 AM Bug #21416 (Not Fixed with Hotfix): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- % is not displaying as whole.
- 11:45 AM Bug #21416 (Fixed with Hotfix): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- 11:42 AM Bug #21415 (Fixed with Hotfix): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 11:36 AM Bug #21394 (Fixed with Hotfix): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
02/11/2021
- 09:59 PM Bug #21394 (Fixed in Dev): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 09:55 PM Bug #21415 (Fixed in Dev): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 01:06 PM Bug #21415 (Not Fixed with Hotfix): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 01:05 PM Bug #21415 (Fixed with Hotfix): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 01:27 AM Bug #21415 (Fixed in Dev): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 09:53 PM Bug #21416 (Fixed in Dev): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- 01:44 PM Bug #21416 (Not Fixed with Hotfix): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- Chart is not dispalying
- 01:43 PM Bug #21416 (Fixed with Hotfix): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- Unable to check this
- 09:48 PM Bug #21422 (Fixed in Dev): Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multiple data's
- 02:15 PM Bug #21422 (Not Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multiple data's
- 02:15 PM Bug #21422 (Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multiple data's
- 01:01 AM Bug #21422 (Fixed in Dev): Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multiple data's
- 09:47 PM Bug #21426 (Fixed in Dev): Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status for Completed and Deadline violated and completed
- 02:17 PM Bug #21426 (Not Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status for Completed and Deadline violated and completed
- 02:17 PM Bug #21426 (Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status for Completed and Deadline violated and completed
- 12:34 AM Bug #21426 (Fixed in Dev): Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status for Completed and Deadline violated and completed
- 09:34 PM Bug #21425 (Fixed in Dev): Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion Date -> Time is not showing correctly
- 01:08 PM Bug #21425 (Not Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion Date -> Time is not showing correctly
- Data is not displayed in both fields
- 01:07 PM Bug #21425 (Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion Date -> Time is not showing correctly
- 12:49 AM Bug #21425 (Fixed in Dev): Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion Date -> Time is not showing correctly
- 09:33 PM Bug #21424 (Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 2020 audits are there but its not displaying in chart
- 09:32 PM Bug #21424 (Fixed in Dev): Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 2020 audits are there but its not displaying in chart
- 02:16 PM Bug #21424 (Not Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 2020 audits are there but its not displaying in chart
- 02:16 PM Bug #21424 (Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 2020 audits are there but its not displaying in chart
- 01:01 AM Bug #21424 (Fixed in Dev): Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 2020 audits are there but its not displaying in chart
- 07:17 PM Bug #21587 (Fixed in Dev): Repeat NC-> Failure category should be displayed based on the audit pro license. Currently failure category displayed from LPA
- no need license for this menu
- 07:17 PM Bug #21481 (Fixed in Dev): Auditee & Auditor approval: Audit should be displayed for user mention below, when the business rule set as" is all Auditor/Auditee Confirmation Mandatory?"
- 07:08 PM Bug #21630 (Open): Web Application -> LPA : Mapped Failure category and Failure reason is not displaying in Upload NC/OFI screen
- 06:56 PM Bug #21630 (Resolved): Web Application -> LPA : Mapped Failure category and Failure reason is not displaying in Upload NC/OFI screen
- Mapped Failure category and Failure reason is not displaying in Upload NC/OFI screen
- 07:07 PM Bug #21629 (Open): Web Application : LPA -> When Selected Time period as "Period" system is getting hanged
- 06:51 PM Bug #21629 (Closed): Web Application : LPA -> When Selected Time period as "Period" system is getting hanged
- When Selected Time period as "Period" system is getting hanged
- 05:22 PM Bug #21288 (Fixed in Dev): Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- Please find the consolidated menu scripts in attachment
- 02:30 PM Bug #21450: Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- Excuse Report
Filters: The following items needed in filter
1. Year
2. Month
3. Status
4. Responsible Pers... - 12:42 PM Bug #21450 (Not Fixed with Hotfix): Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- Equipment Code is not there in filter
- 12:41 PM Bug #21450 (Fixed with Hotfix): Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- 02:26 PM Bug #21618 (Open): Excuse Reports Filters -> As per cummins lpa findings report, Equipment Category has to display along with Equipment, Code and type
- 02:25 PM Bug #21618 (Closed): Excuse Reports Filters -> As per cummins lpa findings report, Equipment Category has to display along with Equipment, Code and type
- Excuse Reports Filters -> As per cummins lpa findings report, Equipment Category has to display along with Equipment...
- 02:21 PM Bug #21616 (Open): All LPA Reports -> Based on status,Year and month the data's are not filtered
- 02:20 PM Bug #21616 (Closed): All LPA Reports -> Based on status,Year and month the data's are not filtered
- All LPA Reports -> Based on status, Year and month the data's are not filtered
- 02:20 PM Bug #21615 (Open): All LPA Reports ->Other shift data is displaying but the shift name is displaying as default both filter and chart (High)
- 02:19 PM Bug #21615 (Closed): All LPA Reports ->Other shift data is displaying but the shift name is displaying as default both filter and chart (High)
- All LPA Reports ->Other shift data is displaying but the shift name is displaying as default both filter and chart (...
- 01:51 PM Bug #21517 (Fixed with Hotfix): LPA Excuse Report -> Chart View -> No of reassign label has to change it as "Cumulative Excuses"
- 01:50 PM Bug #21516 (Not Fixed with Hotfix): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- 01:50 PM Bug #21516 (Fixed with Hotfix): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- 01:50 PM Bug #21515 (Not Fixed with Hotfix): LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields
- 01:50 PM Bug #21515 (Fixed with Hotfix): LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields
- 01:49 PM Bug #21513 (Fixed with Hotfix): LPA Excuse Performance Report -> No. of Scheduled label should be renamed as "Total no of audit scheduled (As per discussion with techsupport)
- 01:49 PM Bug #21411 (Fixed with Hotfix): LPA Excuse Report -> "LPA Performance" title should be renamed as "LPA Excuse Report"
- 01:10 AM Bug #21411 (Fixed in Dev): LPA Excuse Report -> "LPA Performance" title should be renamed as "LPA Excuse Report"
- 01:48 PM Bug #21408 (Fixed with Hotfix): LPA Excuse Performance -> Tabular View in bottom of the report -> Audit Start Date and Audit end Date is not displayed as per administrator user preference
- 01:12 AM Bug #21408 (Fixed in Dev): LPA Excuse Performance -> Tabular View in bottom of the report -> Audit Start Date and Audit end Date is not displayed as per administrator user preference
- 01:48 PM Bug #21407 (Fixed with Hotfix): LPA Excuse Performance -> Filters ->Various issues in filter
- 01:16 AM Bug #21407 (Fixed in Dev): LPA Excuse Performance -> Filters ->Various issues in filter
- 01:46 PM Bug #21406 (Not Fixed with Hotfix): LPA Excuse Performance -> Data's are not displaying for some columns in tabular view on bottom of the report
- 01:46 PM Bug #21406 (Fixed with Hotfix): LPA Excuse Performance -> Data's are not displaying for some columns in tabular view on bottom of the report
- 01:13 AM Bug #21406 (Fixed in Dev): LPA Excuse Performance -> Data's are not displaying for some columns in tabular view on bottom of the report
- 01:46 PM Bug #21405 (Fixed with Hotfix): LPA Excuse Performance -> Label changes in some charts and tabular view in bottom of the report
- 01:22 AM Bug #21405 (Fixed in Dev): LPA Excuse Performance -> Label changes in some charts and tabular view in bottom of the report
- 01:42 PM Bug #21417 (Not Fixed with Hotfix): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- Such a field is not displaying
- 01:42 PM Bug #21417 (Fixed with Hotfix): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- 01:37 PM Bug #21419 (Fixed with Hotfix): LPA Audit Adherence (Old) -> Tabular View -> In chat , The data's are showing for the Year 2021 and 2023. But in tabular view, 2021 record only displayed. 2023 is not displaying
- 02:16 AM Bug #21419 (Fixed in Dev): LPA Audit Adherence (Old) -> Tabular View -> In chat , The data's are showing for the Year 2021 and 2023. But in tabular view, 2021 record only displayed. 2023 is not displaying
- 01:25 PM Bug #21420: LPA Audit Adherence (Old) -> Chart View -> Total Percentage / Completed Percentage is not displaying for the year which is showing 2nd place in chart
- Chart is not displaying only tabular is displaying
- 01:25 PM Bug #21420 (Fixed with Hotfix): LPA Audit Adherence (Old) -> Chart View -> Total Percentage / Completed Percentage is not displaying for the year which is showing 2nd place in chart
- 01:03 AM Bug #21420 (Fixed in Dev): LPA Audit Adherence (Old) -> Chart View -> Total Percentage / Completed Percentage is not displaying for the year which is showing 2nd place in chart
- 01:21 PM Bug #21423 (Fixed with Hotfix): Audit - Adherence to Schedule in % (Old) -> Tabular View -> Label changes in tabular view
- 01:04 PM Bug #21428 (Fixed with Hotfix): LPA Repeat NC & OFI -> Various issues in Tabular View
- >
- 01:01 PM Bug #21429 (Not Fixed with Hotfix): LPA Repeat NC & OFI -> Label Changes in Tabular View
- 4. Auditee NC Closure Timeline should be "Auditor Findings Closure Timeline"
5. NC Ageing should be "Findings Agin... - 01:00 PM Bug #21429 (Fixed with Hotfix): LPA Repeat NC & OFI -> Label Changes in Tabular View
- 12:51 PM Bug #21447 (Fixed with Hotfix): All New Reports -> Label Changes: 1. Findings Ageing should be renamed as "Findings Aging" 2. Chart : Findings Wise NC & OFI should be renamed as " Findings Category wise NC & OFI"
- 12:44 PM Bug #21448 (Not Fixed with Hotfix): LPA_Findings Classification Summary / Findings Closure Summary / LPA Findings Summary : 1. Finding aging should be displayed as per below. 0-15 15-30 30-45 … Now its showing 1-15
- No category required for the timeline on or equal to 0. It should be 0-15 .
- 12:42 PM Bug #21448 (Fixed with Hotfix): LPA_Findings Classification Summary / Findings Closure Summary / LPA Findings Summary : 1. Finding aging should be displayed as per below. 0-15 15-30 30-45 … Now its showing 1-15
- 12:39 PM Bug #21454 (Fixed with Hotfix): All LPA New Reports - Process and Department Tabular View -> Process and department name is not getting displayed based on NC / OFI Mapping for each chart and tabular view in bottom
- 01:31 AM Bug #21454 (Fixed in Dev): All LPA New Reports - Process and Department Tabular View -> Process and department name is not getting displayed based on NC / OFI Mapping for each chart and tabular view in bottom
- 12:34 PM Bug #21594 (Fixed in Dev): Responsible Person-> Responsible person user selection should be based on auditor access and ITAR specification
- 12:29 PM Bug #21455 (Fixed with Hotfix): All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be displayed in tabular data similar with layer wise chart
- 12:08 PM Bug #21459 (Not Fixed with Hotfix): All LPA New Reports - Filters -> Process / Department / Failure Category :: "Data Not Found" option is need to filter the data since the these are optional fields in application
- LPA Findings Closure Report - Such a option is not there
- 12:08 PM Bug #21459 (Fixed with Hotfix): All LPA New Reports - Filters -> Process / Department / Failure Category :: "Data Not Found" option is need to filter the data since the these are optional fields in application
- 11:49 AM Bug #21464 (Fixed with Hotfix): All New Reports -> The filter and report is showing data's only for default shift. Other shift data's are not displayed
- Shift is there in filter
- 07:33 AM Bug #21597 (Fixed in Dev): Report tab->Data provided by Responsible person is not displayed to auditor
02/10/2021
- 09:00 PM Bug #21537 (Closed): Web Application -> Cummins Changes -> MFG Process Audit checklist Report -> PDF View is not showing the complete data.Its showing partially
- 09:00 PM Bug #21537 (Resolved): Web Application -> Cummins Changes -> MFG Process Audit checklist Report -> PDF View is not showing the complete data.Its showing partially
- 09:00 PM Bug #21537 (Fixed in Dev): Web Application -> Cummins Changes -> MFG Process Audit checklist Report -> PDF View is not showing the complete data.Its showing partially
- 09:00 PM Bug #21535 (Closed): Web Application -> Cummins Requirement -> Email is not working for NC timeline extension
- 09:00 PM Bug #21535 (Resolved): Web Application -> Cummins Requirement -> Email is not working for NC timeline extension
- 09:00 PM Bug #21527 (Closed): Web Application : Unable to select checklist from audit assign of LPA Schedule if more than one audit checklist is mapped with equipment and layer
- 09:00 PM Bug #21527 (Resolved): Web Application : Unable to select checklist from audit assign of LPA Schedule if more than one audit checklist is mapped with equipment and layer
- 09:00 PM Bug #21520 (Closed): Web Application : After Excuse Changes in Audit Assign Popup - The approved audit status is changed to "Tentative" if the scheduler modify the date (Date / auditor / checklist / auditee)
- 09:00 PM Bug #21520 (Resolved): Web Application : After Excuse Changes in Audit Assign Popup - The approved audit status is changed to "Tentative" if the scheduler modify the date (Date / auditor / checklist / auditee)
- 08:59 PM Bug #21514 (Closed): Web Application : After Excuse Changes -> Cancel button is not working for individual audits
- 08:59 PM Bug #21514 (Resolved): Web Application : After Excuse Changes -> Cancel button is not working for individual audits
- CLosed in SP1060CY2
- 08:47 PM Bug #21416 (Fixed in Dev): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- 08:44 PM Bug #21417 (Fixed in Dev): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- 08:42 PM Bug #21423 (Fixed in Dev): Audit - Adherence to Schedule in % (Old) -> Tabular View -> Label changes in tabular view
- 08:38 PM Bug #21428 (Fixed in Dev): LPA Repeat NC & OFI -> Various issues in Tabular View
- 08:38 PM Bug #21429 (Fixed in Dev): LPA Repeat NC & OFI -> Label Changes in Tabular View
- 08:33 PM Bug #21447 (Fixed in Dev): All New Reports -> Label Changes: 1. Findings Ageing should be renamed as "Findings Aging" 2. Chart : Findings Wise NC & OFI should be renamed as " Findings Category wise NC & OFI"
- 08:26 PM Bug #21450 (Fixed in Dev): Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- 07:45 PM Bug #21455 (Fixed in Dev): All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be displayed in tabular data similar with layer wise chart
- 07:42 PM Bug #21459 (Fixed in Dev): All LPA New Reports - Filters -> Process / Department / Failure Category :: "Data Not Found" option is need to filter the data since the these are optional fields in application
- 07:18 PM Bug #21513 (Fixed in Dev): LPA Excuse Performance Report -> No. of Scheduled label should be renamed as "Total no of audit scheduled (As per discussion with techsupport)
- 07:17 PM Bug #21517 (Fixed in Dev): LPA Excuse Report -> Chart View -> No of reassign label has to change it as "Cumulative Excuses"
- 06:36 PM Bug #21542 (Fixed in Dev): Multisite -> Auditee label need to convert in actual audit
- 06:09 PM Bug #21598 (Open): Report tab-> In responsible person's action page - Terminate option not available
- 06:09 PM Bug #21597 (Open): Report tab->Data provided by Responsible person is not displayed to auditor
- 06:09 PM Bug #21594 (Open): Responsible Person-> Responsible person user selection should be based on auditor access and ITAR specification
- 06:09 PM Bug #21587 (Open): Repeat NC-> Failure category should be displayed based on the audit pro license. Currently failure category displayed from LPA
- 05:55 PM Bug #21596 (Fixed in Dev): Report tab-> Schedule audit link is not working in report tab
- 05:50 PM Bug #21596 (Open): Report tab-> Schedule audit link is not working in report tab
- 05:55 PM Bug #21588 (Fixed in Dev): Responsibility person-> Report tab-> While clicking on the closed out audit link no action is performed or it can be hide out from the report tab
- 05:50 PM Bug #21588 (Open): Responsibility person-> Report tab-> While clicking on the closed out audit link no action is performed or it can be hide out from the report tab
- 05:50 PM Bug #21589 (Open): Remove the opt text option in Auditee contact person, scope and focus
- 05:50 PM Bug #21586 (Open): CSD details-> No action performed when we entering more then 500 character after clicking on the save button.
- 05:46 PM Bug #21551 (Fixed in Dev): Report tab-> While publish from Report tab successfully message is not displayed
- 05:46 PM Bug #21548 (Fixed in Dev): Report->Audit should be displayed based on site specific in report tab
- 05:03 PM Bug #21552 (Fixed in Dev): Report tab-> Details are missing such as start date ,end date, date of audit .
02/09/2021
- 07:22 PM Bug #21602 (Closed): Requirement 7-> In chart screen Anova table doesn't showing data. Please refer screenshot
- 02:01 PM Bug #21598 (Closed): Report tab-> In responsible person's action page - Terminate option not available
- Report tab-> In responsible person's action page, audit is not getting displayed so can't able to terminate it if he ...
- 01:30 PM Bug #21597 (Closed): Report tab->Data provided by Responsible person is not displayed to auditor
- Report tab->Data provided by Responsible person is not displayed to auditor
- 12:46 PM Bug #21596 (Resolved): Report tab-> Schedule audit link is not working in report tab
- Report tab-> Schedule audit link is not working in report tab
- 12:16 PM Bug #21288 (Not Fixed with Hotfix): Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- LPA Findings Report - Menu Has to remove - Not Done
LPA Findings Classification - Menu Has to remove - Not Done
P... - 12:16 PM Bug #21288 (Fixed with Hotfix): Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- 12:12 PM Bug #21390 (Not Fixed with Hotfix): Cummins LPA Report -> Menu Icon missing
- Icon still missing
- 12:11 PM Bug #21390 (Fixed with Hotfix): Cummins LPA Report -> Menu Icon missing
- 10:55 AM Bug #21594 (Closed): Responsible Person-> Responsible person user selection should be based on auditor access and ITAR specification
- Responsible Person-> Responsible person user selection should be based on auditor access.
- 12:53 AM Bug #21302 (Closed): New Doc Request - After adding the document, the reference attachment is still editable.
- 12:53 AM Bug #21303 (Closed): Change Request - On selecting the Delete Document check box, no need of displaying the reference attachment button
- 12:52 AM Bug #21330 (Closed): TOC- Rename the Reference attachment link name to "view" instead of showing Reference attachment again
- 12:44 AM Bug #21356 (Closed): Change Request: Click on Delete document and uncheck it . Reference attachment option is not displayed
- 12:42 AM Bug #21365 (Closed): New Doc Draft- Error Occurs while requesting draft without reference attachement.The page gets blank ( Same for Doc to Draft )
- 12:41 AM Bug #21370 (Closed): Document TOC- Dos to Draft screen alignment has no proper alignment
02/08/2021
- 09:45 PM Bug #21464 (Fixed in Dev): All New Reports -> The filter and report is showing data's only for default shift. Other shift data's are not displayed
- 09:45 PM Bug #21515 (Fixed in Dev): LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields
- 09:44 PM Bug #21516 (Fixed in Dev): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- 06:24 PM Bug #21589 (Fixed with Hotfix): Remove the opt text option in Auditee contact person, scope and focus
- Remove the opt text option in Auditee contact person, scope and focus
- 06:14 PM Bug #21588 (Closed): Responsibility person-> Report tab-> While clicking on the closed out audit link no action is performed or it can be hide out from the report tab
- While clicking on the closed out audit link no action is performed or it can be hide out from the report tab
- 05:54 PM Bug #21587 (Fixed with Hotfix): Repeat NC-> Failure category should be displayed based on the audit pro license. Currently failure category displayed from LPA
- Repeat NC-> Failure category should be displayed based on the audit pro license. Currently failure category displayed...
- 05:18 PM Bug #21586 (Fixed with Hotfix): CSD details-> No action performed when we entering more then 500 character after clicking on the save button.
- CSD details-> No action performed when we entering more then 500 character after clicking on the save button.
- 03:45 PM Usability #21582 (Closed): Requirement 7->If try to import the data when study is in "Pending closeout status" then the data in study screen automatically show the calculated value as well as save the imported data details without clicking on calculate and save button.
- 03:45 PM Bug #21540 (Fixed in Dev): Corporate&Multisite-> Status color is not displayed in audit schedule page.
- 03:05 PM Bug #21537: Web Application -> Cummins Changes -> MFG Process Audit checklist Report -> PDF View is not showing the complete data.Its showing partially
- will share the detail to replicate
- 10:02 AM Bug #21553 (Fixed in Dev): Business rule->Not able to set yes as in the "Is all auditor and auditee are manadatory' field.
- 10:02 AM Bug #21553 (Open): Business rule->Not able to set yes as in the "Is all auditor and auditee are manadatory' field.
- 10:02 AM Bug #21552 (Open): Report tab-> Details are missing such as start date ,end date, date of audit .
- 10:02 AM Bug #21551 (Open): Report tab-> While publish from Report tab successfully message is not displayed
- 10:02 AM Bug #21548 (Open): Report->Audit should be displayed based on site specific in report tab
- 09:58 AM Bug #21541 (Fixed in Dev): Multisite-> Mandatory symbols need to displayed based on templates for scope, focus
- tose are not mandatory
- 09:48 AM Bug #21545 (Fixed in Dev): Alert message is not proper, it should be displays as Yes or no option in audit schedule page.
- 08:56 AM Bug #21535 (Fixed in Dev): Web Application -> Cummins Requirement -> Email is not working for NC timeline extension
- 08:55 AM Bug #21538 (Fixed in Dev): Multisite->Template->"Copy from element" should come below the scope and auditee primary contact
- 08:55 AM Bug #21477 (Fixed in Dev): Auditee & Auditor approval require 1st: Audit is not displayed for Auditor and auditee, when business rule is YES in auditor/auditee approval process before Plan Approval
02/05/2021
- 10:44 PM Bug #21527 (Fixed in Dev): Web Application : Unable to select checklist from audit assign of LPA Schedule if more than one audit checklist is mapped with equipment and layer
- 06:20 PM Bug #21390 (Fixed in Dev): Cummins LPA Report -> Menu Icon missing
- 06:20 PM Bug #21288 (Fixed in Dev): Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- 06:07 PM Bug #21510 (Fixed in Dev): LPA : When teams of User in sufficient for layer system displays validation displays Old UI and Size of the validation to be increase
- 06:02 PM Bug #21563: Document Template: Without having options for checkbox,select,multi select and radio button, the element should not be saved. Due to that i cant able to close the additional info popup in new document request
- Guess The site needs to be upgraded with latest patches, in doc template cant able to remove elements. After removing...
- 03:29 PM Bug #21563 (Closed): Document Template: Without having options for checkbox,select,multi select and radio button, the element should not be saved. Due to that i cant able to close the additional info popup in new document request
- Document Template: Without having options for checkbox,select,multi select and radio button, the element should not b...
- 04:56 PM Bug #21537: Web Application -> Cummins Changes -> MFG Process Audit checklist Report -> PDF View is not showing the complete data.Its showing partially
- cannot able to replicate. PFA
- 04:42 PM Bug #21567 (Closed): Classification master menu: on saving the classification name by giving space character as an input, system close the popup and shows alert message to enter the data(common for all 3 master)
- Classification master menu: on saving the classification name by giving space character as an input, system close the...
02/04/2021
- 10:06 AM Bug #21553 (Resolved): Business rule->Not able to set yes as in the "Is all auditor and auditee are manadatory' field.
- Business rule->Not able to set yes as in the "Is all auditor and auditee are manadatory' field.
02/03/2021
- 11:41 PM Bug #21520 (Fixed in Dev): Web Application : After Excuse Changes in Audit Assign Popup - The approved audit status is changed to "Tentative" if the scheduler modify the date (Date / auditor / checklist / auditee)
- 07:00 PM Bug #21288: Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- LPA Findings Report - Menu Has to remove - Not Done
LPA Findings Classification - Menu Has to remove - Not Done
... - 06:14 PM Bug #21542 (Open): Multisite -> Auditee label need to convert in actual audit
- 06:14 PM Bug #21541 (Open): Multisite-> Mandatory symbols need to displayed based on templates for scope, focus
- 06:14 PM Bug #21540 (Open): Corporate&Multisite-> Status color is not displayed in audit schedule page.
- 06:14 PM Bug #21539 (Open): Corporate&Multisite->Template->Auditee primary contact label need to convert
- 05:32 PM Bug #21552 (Resolved): Report tab-> Details are missing such as start date ,end date, date of audit .
- Report tab-> Details are missing such as start date ,end date, date of audit .
- 05:20 PM Bug #21551 (Resolved): Report tab-> While publish from Report tab successfully message is not displayed
- Report tab-> While publish from Report tab successfully message is not displayed
- 03:28 PM Bug #21548 (Resolved): Report->Audit should be displayed based on site specific in report tab
- Report->Audit should be displayed based on site specific in perform audit
- 02:54 PM Bug #21477 (Not Fixed with Hotfix): Auditee & Auditor approval require 1st: Audit is not displayed for Auditor and auditee, when business rule is YES in auditor/auditee approval process before Plan Approval
- still the issue occur
- 02:27 PM Bug #21545 (Open): Alert message is not proper, it should be displays as Yes or no option in audit schedule page.
- 01:43 PM Bug #21545 (Fixed with Hotfix): Alert message is not proper, it should be displays as Yes or no option in audit schedule page.
- Alert message is not proper, it should be displays as Yes or no option in audit schedule page.
- 02:21 PM Bug #21538 (Open): Multisite->Template->"Copy from element" should come below the scope and auditee primary contact
- 01:03 PM Bug #21514 (Fixed in Dev): Web Application : After Excuse Changes -> Cancel button is not working for individual audits
- 11:43 AM Bug #21475 (Fixed in Dev): Repeat NC: Mail is not generated
- 11:43 AM Bug #21114 (Fixed in Dev): Fill checklist -> Submit conformation alert should be design properly
- 11:43 AM Bug #21109 (Fixed in Dev): Scheduler-> list view-> ITAR option should not displays for Non ITAR user ( Need to fix in all pages)
- 11:43 AM Bug #21085 (Fixed in Dev): Audit schedule-> Audit cycle is not redirect to correct location in schedule page
- 11:43 AM Bug #21061 (Fixed in Dev): Responsible person for Audit report Publish : Audit number should be clickable in Report
- 11:43 AM Bug #21058 (Fixed in Dev): Perform audit -> Preview Report is not working.
- 11:43 AM Bug #21042 (Fixed in Dev): Responsible person in scheduling screen : Audit details Show all is not displaying all the mapped responsible persons this should be handled every where in Audit derails area in planned and actual audit
- 11:43 AM Bug #21011 (Fixed in Dev): Authority to send audit report -> Mail option need to enable in scheduler and auditor part
- 11:43 AM Bug #21010 (Fixed in Dev): Req:Audit specific Scope and Focus-> Based on the template option it should be optional or mandatory. Make sure it displays based on the UI Standard
- 11:43 AM Bug #21000 (Fixed in Dev): Responsible person for Audit report Publish : Published audit report is not listing to mapped responsible person any where
- 11:43 AM Bug #20974 (Fixed in Dev): Req:Audit specific Scope and Focus->Responsible person name is displayed as undefined. Duplicate heading is displayed and show all button need to design as per UI Standard
- 11:43 AM Bug #20970 (Fixed in Dev): Req:Audit specific Scope and Focus->Show all button is not located in correct place and water mark not converted in actual audit
- 11:43 AM Bug #20966 (Fixed in Dev): Req:Audit specific Scope and Focus->Template page->Not able add focus in planned and actual template
02/02/2021
- 07:16 PM Bug #21542 (Resolved): Multisite -> Auditee label need to convert in actual audit
- Multisite -> Auditee label need to convert in actual audit
- 07:02 PM Bug #21541 (Fixed with Hotfix): Multisite-> Mandatory symbols need to displayed based on templates for scope, focus
- Multisite-> Mandatory symbols need to displayed based on templates for scope, focus
- 06:55 PM Bug #21540 (Resolved): Corporate&Multisite-> Status color is not displayed in audit schedule page.
- Multisite-> Status color is not displayed in audit schedule page.
- 05:28 PM Bug #21539 (Fixed with Hotfix): Corporate&Multisite->Template->Auditee primary contact label need to convert
- Multisite->Template->Auditee primary contact label need to convert
- 05:24 PM Bug #21538 (Resolved): Multisite->Template->"Copy from element" should come below the scope and auditee primary contact
- Template->"Copy from element" should come below the scope and auditee primary contact
- 04:55 PM Bug #21537 (Open): Web Application -> Cummins Changes -> MFG Process Audit checklist Report -> PDF View is not showing the complete data.Its showing partially
- 04:54 PM Bug #21537 (Closed): Web Application -> Cummins Changes -> MFG Process Audit checklist Report -> PDF View is not showing the complete data.Its showing partially
- Web Application -> Cummins Changes -> MFG Process Audit checklist Report -> PDF View is not showing the complete data...
- 04:38 PM Bug #21536 (Open): Web Application -> Cummins Requirement -> If one of the check point is identified as NC for one workstation means the same check point should be removed from randomization until the NC or OFI is getting closed
- 04:37 PM Bug #21536 (Closed): Web Application -> Cummins Requirement -> If one of the check point is identified as NC for one workstation means the same check point should be removed from randomization until the NC or OFI is getting closed
- Web Application -> Cummins Requirement -> If one of the check point is identified as NC for one workstation means the...
- 04:38 PM Bug #21535 (Open): Web Application -> Cummins Requirement -> Email is not working for NC timeline extension
- 04:35 PM Bug #21535 (Closed): Web Application -> Cummins Requirement -> Email is not working for NC timeline extension
- Web Application -> Cummins Requirement -> Email is not working for NC timeline extension
- 04:13 PM Bug #21466 (Open): CSD details->Icon should be displayed before Save button
- 01:46 PM Bug #21527 (Open): Web Application : Unable to select checklist from audit assign of LPA Schedule if more than one audit checklist is mapped with equipment and layer
- 01:44 PM Bug #21527 (Closed): Web Application : Unable to select checklist from audit assign of LPA Schedule if more than one audit checklist is mapped with equipment and layer
- Web Application : Unable to select checklist from audit assign of LPA Schedule if more than one audit checklist is ma...
- 11:13 AM Bug #21520 (Not Fixed with Hotfix): Web Application : After Excuse Changes in Audit Assign Popup - The approved audit status is changed to "Tentative" if the scheduler modify the date (Date / auditor / checklist / auditee)
- 11:13 AM Bug #21520 (Fixed with Hotfix): Web Application : After Excuse Changes in Audit Assign Popup - The approved audit status is changed to "Tentative" if the scheduler modify the date (Date / auditor / checklist / auditee)
- 11:06 AM Bug #21520 (Fixed in Dev): Web Application : After Excuse Changes in Audit Assign Popup - The approved audit status is changed to "Tentative" if the scheduler modify the date (Date / auditor / checklist / auditee)
- 11:12 AM Bug #21526 (Closed): Requirement 7->Need to restrict to adding extra column and more gage number in single sheet
- 1) Able to add extra column in selected file and there is no intimation (Ex: ‘This sheet should not accept extra colu...
- 11:07 AM Bug #21060 (Fixed in Dev): Responsible person for Audit report Publish: While click on the report it throw a error as data tables warning error
- 11:07 AM Bug #21015 (Fixed in Dev): Repeat NC : No of Occurrence of repeat NC /OFI is not generating
02/01/2021
- 08:06 PM Bug #16997 (Closed): Data not found is displayed in auditee response page and auditor closed out page.
- 08:06 PM Bug #16997 (Resolved): Data not found is displayed in auditee response page and auditor closed out page.
- 08:06 PM Bug #16997 (Fixed in Dev): Data not found is displayed in auditee response page and auditor closed out page.
- 08:06 PM Bug #17191 (Closed): Non ITAR user-> ITAR program is displayed for Non ITAR user
- 08:06 PM Bug #17190 (Closed): Social media -> Checklist is not displayed based on the ITAR /NON ITAR in Audit form
- 08:06 PM Bug #17189 (Closed): Audit type is not displayed in copy Audit form in Audit program page.
- 08:06 PM Bug #17176 (Closed): Social Media -> Count is displayed incorrect in Auditee response page.
- 08:06 PM Bug #17160 (Closed): Email -> Email is not working for ITAR user.
- 08:06 PM Bug #17107 (Closed): Audit form -> Audit form which is assign for No Is displayed for Yes Option. It should not depended.
- 08:06 PM Bug #17129 (Closed): Filter -> Month view-> Based on Yes/No option it should be displayed Audit type, Audit program, Audit type, Audit cycle.
- 08:06 PM Bug #17116 (Closed): Audit schedule-> Based on the filter the audit program should be displayed in audit schedule page
- 08:06 PM Bug #17110 (Closed): Findings Category -> Based on ITAR Selection, Nc category need to be displayed using show "All button".
- 08:06 PM Bug #17039 (Closed): Filter-> dropdown filter is not working based on selection on the above.It should change dynamic
- 08:06 PM Bug #17003 (Closed): Filter should be displayed based on ITAR Specification.It displays all the details ITAR and NON ITAR. We need a drop down Yes and NO option as audit schedule
- 08:05 PM Bug #17120 (Closed): Audit Schedule-> Filter "Yes /No" should be disable after a single audit is created in audit cycle
- 08:05 PM Bug #17109 (Closed): Map entity -> Entity type, Business type, site type is not displayed in map entity
- 08:05 PM Bug #17051 (Closed): Filter-> We are able to create a schedule in single cycle using Yes/NO filter
- 08:05 PM Bug #17047 (Closed): Assign Audit type-> It should displays only the NON ITAR type but it display all the audit type
- 08:05 PM Bug #17128 (Closed): Filter is not working in Audit program. Default audit is not displayed while selection NO option.
- 08:05 PM Bug #17104 (Closed): Audit form -> Drop down should not be displayed for Non ITAR user in Audit program page.
- 08:05 PM Bug #17054 (Closed): Audit program( Map entity)-> Non ITAR user should be displayed in map entity, when we select the option"No " in ITAR Dropdown
- 08:05 PM Bug #17049 (Closed): Audit Program(Program manager)-> While selection program manager it should display only Non- ITAR user. It displayed both the ITAR & Non ITAR user
- 08:05 PM Bug #17029 (Closed): Checklist->Non ITAR-> Parameter is not displayed in checklist page.
- 08:05 PM Bug #16993 (Closed): Checklist should be ITAR specification. It displays all the Checklist
- 08:02 PM Bug #21481 (Open): Auditee & Auditor approval: Audit should be displayed for user mention below, when the business rule set as" is all Auditor/Auditee Confirmation Mandatory?"
- 08:02 PM Bug #21510 (Open): LPA : When teams of User in sufficient for layer system displays validation displays Old UI and Size of the validation to be increase
- 08:02 PM Bug #21503 (Open): In Audit record positive (Benchmark): IATF form->Benchmark is not displayed in highlighted field
- 08:00 PM Usability #13968 (Closed): Rename the Audit report based on the template selection.Name should be static not link
- 07:59 PM Usability #21229 (Closed): 10.5.0 hotfix-> Need to remove and add the manadatory in Audit pro
- 07:58 PM Unit Level and Cosmetic Issues #17139 (Closed): LPA : Colour Code / Selections across module is changing between ITAR and Non ITAR user
- 07:58 PM Unit Level and Cosmetic Issues #17139 (Resolved): LPA : Colour Code / Selections across module is changing between ITAR and Non ITAR user
- 07:58 PM Unit Level and Cosmetic Issues #17111 (Closed): LPA : Part of code is displaying underneath save button in Equipment creation screen
- 07:58 PM Unit Level and Cosmetic Issues #17111 (Resolved): LPA : Part of code is displaying underneath save button in Equipment creation screen
- 07:58 PM Unit Level and Cosmetic Issues #17059 (Closed): LPA : In Auditor login correction and closeout label is displaying only closeout
- 07:58 PM Unit Level and Cosmetic Issues #17059 (Resolved): LPA : In Auditor login correction and closeout label is displaying only closeout
- 07:58 PM Unit Level and Cosmetic Issues #16773 (Closed): Checklist page loading symbol is displaying twice
- 07:58 PM Unit Level and Cosmetic Issues #16773 (Resolved): Checklist page loading symbol is displaying twice
- 07:58 PM Unit Level and Cosmetic Issues #13979 (Closed): Add and remove the text in NC details page
- 07:55 PM Bug #21018 (Closed): SP10.5.0 Hotfix -> Label Changes in audit pro
- 07:55 PM Bug #21018: SP10.5.0 Hotfix -> Label Changes in audit pro
- Verified in SP1060
- 07:54 PM Bug #21018 (Resolved): SP10.5.0 Hotfix -> Label Changes in audit pro
- 06:45 PM Bug #21288: Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- LPA Findings Report - Menu Has to remove - Not Done
PA_Findings Closure Summary Menu is diosplaying as --ROLLPANCC... - 05:28 PM Bug #21460 (Fixed with Hotfix): All LPA New Reports - Chart ->"Failure Category Not Found" option is need to like process and department
- 05:09 PM Bug #21520 (Open): Web Application : After Excuse Changes in Audit Assign Popup - The approved audit status is changed to "Tentative" if the scheduler modify the date (Date / auditor / checklist / auditee)
- 05:03 PM Bug #21520 (Closed): Web Application : After Excuse Changes in Audit Assign Popup - The approved audit status is changed to "Tentative" if the scheduler modify the date (Date / auditor / checklist / auditee)
- Web Application : After Excuse Changes - The approved audit status is changed to "Tentative" if the scheduler modify ...
- 04:30 PM Bug #21517 (Open): LPA Excuse Report -> Chart View -> No of reassign label has to change it as "Cumulative Excuses"
- 04:30 PM Bug #21517 (Closed): LPA Excuse Report -> Chart View -> No of reassign label has to change it as "Cumulative Excuses"
- LPA Excuse Report -> Chart View -> No of reassign label has to change it as "Cumulative Excuses"
- 04:27 PM Bug #21516 (Open): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- 04:26 PM Bug #21516 (Closed): LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
- LPA Excuse Report -> Chart and tabular data's are not displaying for some fields
Chart: The below fields are not d... - 04:23 PM Bug #21515 (Open): LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields
- 04:22 PM Bug #21515 (Closed): LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields
- LPA Excuse Performance Report -> Chart and tabular data's are not displaying for some fields
Chart: The below fiel... - 04:23 PM Bug #21514 (Open): Web Application : After Excuse Changes -> Cancel button is not working for individual audits
- 04:12 PM Bug #21514 (Closed): Web Application : After Excuse Changes -> Cancel button is not working for individual audits
- Web Application : After Excuse Changes -> Cancel button is not working for individual audits
Expected Result : Ca... - 04:23 PM Bug #21513 (Open): LPA Excuse Performance Report -> No. of Scheduled label should be renamed as "Total no of audit scheduled (As per discussion with techsupport)
- 04:01 PM Bug #21513 (Closed): LPA Excuse Performance Report -> No. of Scheduled label should be renamed as "Total no of audit scheduled (As per discussion with techsupport)
- LPA Excuse Performance Report -> No. of Scheduled label should be renamed as "Total no of audit scheduled (As per dis...
- 04:18 PM Bug #21042 (Not Fixed with Hotfix): Responsible person in scheduling screen : Audit details Show all is not displaying all the mapped responsible persons this should be handled every where in Audit derails area in planned and actual audit
- Still the issue occur
- 04:16 PM Bug #21037: Edit plan from Audit schedule screen displays blank
- Verified in 2/1/2020
- 04:08 PM Bug #21006 (Not Fixed with Hotfix): CSD menu : When CSD Details filled with Special Characters save and Retrieve Added data is not displaying fields after retrieve
- Still the issue occur
- 04:03 PM Bug #21004 (Not Fixed with Hotfix): CSD Menu : Entered date in CSD menus to be display with tool tip and When more data entered validation to be display saying Should not exceed the limit of characters some thing like that.
- Not fixed as hotfix
- 04:02 PM Bug #21002: CSD Menu : System is allowing to save CSD menu without Specifying any data instead system should display validation
- need to discuss
- 04:00 PM Bug #20993: Audit report Publish is not publishing to Specified Route
- Verified on 2/1/2020
- 03:59 PM Bug #21000 (Not Fixed with Hotfix): Responsible person for Audit report Publish : Published audit report is not listing to mapped responsible person any where
- 03:59 PM Bug #21000: Responsible person for Audit report Publish : Published audit report is not listing to mapped responsible person any where
- Audit is loading
- 03:58 PM Bug #20986: Uploaded NC/OFI is not listing in Listing screen of Upload NC/OFI grid of perform audit page
- Verified in 2/1/2021
- 03:57 PM Bug #20979: Audit Criteria -> Assign Audit type and Form displays Blank screen
- Verified in 2/1/2021
- 02:34 PM Bug #20966 (Not Fixed with Hotfix): Req:Audit specific Scope and Focus->Template page->Not able add focus in planned and actual template
- Still the issue occur
- 02:34 PM Bug #20968: Calendar view is not loading in audit scheduled page.
- Verified on 2/1/2021
- 02:33 PM Bug #20976: Req:Audit specific Scope and Focus->Report -> Application error is displayed while clicking on the report icon
- Verified on 2/1/2021
- 02:33 PM Bug #20974 (Not Fixed with Hotfix): Req:Audit specific Scope and Focus->Responsible person name is displayed as undefined. Duplicate heading is displayed and show all button need to design as per UI Standard
- Still the issue occur
- 02:32 PM Bug #20974: Req:Audit specific Scope and Focus->Responsible person name is displayed as undefined. Duplicate heading is displayed and show all button need to design as per UI Standard
- Verified on 2/1/2021
- 02:32 PM Bug #20972: Req:Audit specific Scope and Focus-> Planned audit is not working while clicking on save button
- Verified on 2/1/2021
- 02:32 PM Bug #20975: Perform page-> Audit report is not loading in perform page.
- Verified on 2/1/2021
- 02:31 PM Bug #20977: Req:Audit specific Scope and Focus->Data is not displayed for Scope , Focus
- Verified on 2/1/2021
- 02:31 PM Bug #21011 (Not Fixed with Hotfix): Authority to send audit report -> Mail option need to enable in scheduler and auditor part
- Not fixed as hotfix
- 02:30 PM Bug #21012: Authority to send audit report -> Audit is not displayed in perform audit page, Responsible person is select in audit schedule
- Verified on 2/1/2021
- 02:28 PM Usability #21014: Req:Audit specific Scope and Focus-> Totally ui is not proper in perform audit page
- Verified on 2/1/2021
- 02:28 PM Bug #21057: Scope and focus-> Audit schedule is not created, when we using special character in Scope and focus
- Verified on 2/1/2021
- 02:27 PM Bug #21058 (Not Fixed with Hotfix): Perform audit -> Preview Report is not working.
- 02:27 PM Bug #21058: Perform audit -> Preview Report is not working.
- Not fixed on 2/1/2021
- 02:22 PM Bug #21061 (Not Fixed with Hotfix): Responsible person for Audit report Publish : Audit number should be clickable in Report
- Not fixed
- 02:19 PM Bug #21060 (Not Fixed with Hotfix): Responsible person for Audit report Publish: While click on the report it throw a error as data tables warning error
- Still the issue occur
- 02:18 PM Bug #21085 (Not Fixed with Hotfix): Audit schedule-> Audit cycle is not redirect to correct location in schedule page
- Not fixed as hotfix
- 02:15 PM Bug #21108: Scheduler-> list view->Lead author and Audit status details are not proper.
- Verified on 2/1/2021
- 02:04 PM Bug #21109 (Not Fixed with Hotfix): Scheduler-> list view-> ITAR option should not displays for Non ITAR user ( Need to fix in all pages)
- 02:04 PM Bug #21109: Scheduler-> list view-> ITAR option should not displays for Non ITAR user ( Need to fix in all pages)
- not fixed as hotfix. ITAR option is displayed
- 01:58 PM Bug #21111: Actual audit -> update -> While updating the schedule the responsible person is not displayed. We have select responsible person in actual audit .
- Verified on 2/1/2021
- 01:15 PM Bug #21111: Actual audit -> update -> While updating the schedule the responsible person is not displayed. We have select responsible person in actual audit .
- Verified on 2/1/2021
- 01:04 PM Bug #21113: Checklist-> Not able to create nc/ofi from fill checklist page. Ref SS more details
- Verified on 2/1/2021
- 12:58 PM Bug #21114 (Not Fixed with Hotfix): Fill checklist -> Submit conformation alert should be design properly
- Alert message should be center
- 12:57 PM Usability #21115: Perform audit -> Responsible person -> It should show two user. Currently it show only one user
- Verified on 2/1/2021
- 12:24 PM Bug #21116: Auditee-> Corrective action -> Audit is displayed but nc is not displayed in corrective action ,
- Verified on 2/1/2021
- 12:22 PM Bug #21474: Planned audit is not working in audit schedule page
- Verified on 2/1/2021
- 12:20 PM Bug #21475 (Not Fixed with Hotfix): Repeat NC: Mail is not generated
- not fixed on 2/1/2021
- 12:15 PM Bug #21035: Audit Schedule -> List View is not loading
- Verified on 2/1/2021
- 12:14 PM Bug #21029: Map entity Some of the fields there is no drop down to select
- Fixed
- 12:13 PM Bug #21478: Adhoc audit is not working in audit schedule
- Verified on 2/1/2021
01/29/2021
- 06:18 PM Bug #21511 (Closed): Requirement 7-> Appraiser code does not matching with parts->Please refer description
- 1) Appraiser code does not matching with parts when we change the order of Appraiser code in excel sheet
2) Able ... - 05:54 PM Bug #21510 (Resolved): LPA : When teams of User in sufficient for layer system displays validation displays Old UI and Size of the validation to be increase
- 1) When teams of User in sufficient for layer system displays validation displays Old UI and Size of the validation t...
- 05:11 PM Bug #21470 (Fixed with Hotfix): Auditee & Auditor approval: Adhoc audit is not display for Responsible person
- 05:11 PM Bug #21469 (Fixed with Hotfix): Auditee & Auditor approval:Tooltip need to convert as per new requirement in adhoc audit
- 05:11 PM Unit Level and Cosmetic Issues #21468 (Fixed with Hotfix): Auditee & Auditor approval: Label conversion need to done for Auditee primary contact in audit schedule
- 05:11 PM Bug #21467 (Fixed with Hotfix): Auditee & Auditor approval : After approval -> Page is not refresh automatically.
- 05:11 PM Usability #21115 (Fixed with Hotfix): Perform audit -> Responsible person -> It should show two user. Currently it show only one user
- 05:11 PM Bug #21114 (Fixed with Hotfix): Fill checklist -> Submit conformation alert should be design properly
- 05:11 PM Unit Level and Cosmetic Issues #21056 (Fixed with Hotfix): List View in Audit Schedule ->List view title should be renamed as "List View"
- 05:11 PM Unit Level and Cosmetic Issues #21041 (Fixed with Hotfix): Field name and validation message to be same in validation where auditee contact person not selected
- 05:11 PM Bug #21018 (Fixed with Hotfix): SP10.5.0 Hotfix -> Label Changes in audit pro
- 05:11 PM Bug #9924 (Fixed with Hotfix): The Legends of the perform audit is displaying in small tips
- 04:21 PM Bug #21486 (Closed): New document request with reference attachments: After adding the doc with ref attachment in new document request, the reference attachment is not showing any where across ewqims
- Fixed in SP925.20
- 04:20 PM Bug #21486 (Resolved): New document request with reference attachments: After adding the doc with ref attachment in new document request, the reference attachment is not showing any where across ewqims
- 04:20 PM Bug #21486 (Fixed in Dev): New document request with reference attachments: After adding the doc with ref attachment in new document request, the reference attachment is not showing any where across ewqims
- 04:20 PM Bug #21486 (Open): New document request with reference attachments: After adding the doc with ref attachment in new document request, the reference attachment is not showing any where across ewqims
- 04:21 PM Bug #21485 (Closed): Admin actions:Pending requests:Modify button shows error only for the change requested document which has reference attachments
- Fixed in SP925.20 HF
- 04:20 PM Bug #21485 (Resolved): Admin actions:Pending requests:Modify button shows error only for the change requested document which has reference attachments
- 04:20 PM Bug #21485 (Fixed in Dev): Admin actions:Pending requests:Modify button shows error only for the change requested document which has reference attachments
- 04:20 PM Bug #21485 (Open): Admin actions:Pending requests:Modify button shows error only for the change requested document which has reference attachments
- 12:38 PM Bug #21113 (Fixed with Hotfix): Checklist-> Not able to create nc/ofi from fill checklist page. Ref SS more details
- 12:38 PM Bug #21111 (Fixed with Hotfix): Actual audit -> update -> While updating the schedule the responsible person is not displayed. We have select responsible person in actual audit .
- 12:38 PM Bug #21109 (Fixed with Hotfix): Scheduler-> list view-> ITAR option should not displays for Non ITAR user ( Need to fix in all pages)
- 12:38 PM Bug #21062 (Fixed with Hotfix): List View in Audit Schedule -> Reports Link -> Calendar View is opening when clicking on "Reports" link
- 12:38 PM Bug #21054 (Fixed with Hotfix): List View in Audit Schedule ->The page is not displaying the multiple data's on Lead auditor field
- 12:38 PM Bug #21053 (Fixed with Hotfix): List View in Audit Schedule -> Audit Criteria and Audit Type is not displaying the data though the respective audit schedule have data
- 12:38 PM Bug #21052 (Fixed with Hotfix): List View in Audit Schedule -> The page is keep on loading while search with input by selecting any field name
- 12:38 PM Bug #21046 (Fixed with Hotfix): NC response date Extension action is still available in Auditor actions area for the findings for which final closeout was performed
- 12:38 PM Bug #21043 (Fixed with Hotfix): Findings Details View Displays all the Fields with Undefined label
- 12:38 PM Bug #21029 (Fixed with Hotfix): Map entity Some of the fields there is no drop down to select
- 12:38 PM Bug #21011 (Fixed with Hotfix): Authority to send audit report -> Mail option need to enable in scheduler and auditor part
- 12:38 PM Bug #21002 (Fixed with Hotfix): CSD Menu : System is allowing to save CSD menu without Specifying any data instead system should display validation
- 12:38 PM Bug #21001 (Fixed with Hotfix): Responsible person for Audit report Publish : When More Users are added as Responsible person then all the mapped users are listing in Audit details area currently system displays only one user
- 12:38 PM Bug #21000 (Fixed with Hotfix): Responsible person for Audit report Publish : Published audit report is not listing to mapped responsible person any where
- 12:38 PM Bug #20993 (Fixed with Hotfix): Audit report Publish is not publishing to Specified Route
- 12:37 PM Bug #21116 (Fixed with Hotfix): Auditee-> Corrective action -> Audit is displayed but nc is not displayed in corrective action ,
- 12:37 PM Bug #21108 (Fixed with Hotfix): Scheduler-> list view->Lead author and Audit status details are not proper.
- 12:37 PM Bug #21085 (Fixed with Hotfix): Audit schedule-> Audit cycle is not redirect to correct location in schedule page
- 12:37 PM Bug #21061 (Fixed with Hotfix): Responsible person for Audit report Publish : Audit number should be clickable in Report
- 12:37 PM Bug #21006 (Fixed with Hotfix): CSD menu : When CSD Details filled with Special Characters save and Retrieve Added data is not displaying fields after retrieve
- 12:37 PM Bug #21004 (Fixed with Hotfix): CSD Menu : Entered date in CSD menus to be display with tool tip and When more data entered validation to be display saying Should not exceed the limit of characters some thing like that.
- 12:37 PM Bug #21477 (Fixed with Hotfix): Auditee & Auditor approval require 1st: Audit is not displayed for Auditor and auditee, when business rule is YES in auditor/auditee approval process before Plan Approval
- 12:37 PM Bug #21476 (Fixed with Hotfix): List view is not loading in perform audit. This issue occurs randomly
- 12:37 PM Bug #21445 (Fixed with Hotfix): List view-> Application error is displayed while schedule the audit
- 12:34 PM Bug #21475 (Fixed with Hotfix): Repeat NC: Mail is not generated
- 12:34 PM Bug #21474 (Fixed with Hotfix): Planned audit is not working in audit schedule page
- 12:34 PM Bug #21060 (Fixed with Hotfix): Responsible person for Audit report Publish: While click on the report it throw a error as data tables warning error
- 12:34 PM Bug #20971 (Fixed with Hotfix): Req:Audit specific Scope and Focus-> Icon is missing and label change in planned audit
- 12:34 PM Bug #20968 (Fixed with Hotfix): Calendar view is not loading in audit scheduled page.
- 12:34 PM Bug #21478 (Fixed with Hotfix): Adhoc audit is not working in audit schedule
- 12:34 PM Bug #21058 (Fixed with Hotfix): Perform audit -> Preview Report is not working.
- 12:34 PM Bug #20974 (Fixed with Hotfix): Req:Audit specific Scope and Focus->Responsible person name is displayed as undefined. Duplicate heading is displayed and show all button need to design as per UI Standard
- 12:34 PM Bug #20966 (Fixed with Hotfix): Req:Audit specific Scope and Focus->Template page->Not able add focus in planned and actual template
- 12:29 PM Bug #21015 (Not Fixed with Hotfix): Repeat NC : No of Occurrence of repeat NC /OFI is not generating
- 12:29 PM Bug #21010 (Not Fixed with Hotfix): Req:Audit specific Scope and Focus-> Based on the template option it should be optional or mandatory. Make sure it displays based on the UI Standard
- 12:29 PM Bug #20970 (Not Fixed with Hotfix): Req:Audit specific Scope and Focus->Show all button is not located in correct place and water mark not converted in actual audit
- 12:08 PM Bug #21507 (Closed): Requirement R7--> Multi parameter import is not working properly. Kindly refer the excel sheet
- When user tries to import the Excel for Second parameter, when the study is in on hold status. The Alert message is s...
- 10:40 AM Bug #21506 (Closed): Requirement R7--> GRR Study --> If part variation is Yes--> The data entry field is not showing in the right side of the screen. Refer screenshot(Verified in cascade db)
- Requirement R7--> GRR Study --> If part variation is Yes--> The data entry field is not showing in the right side of ...
01/28/2021
- 07:06 PM Bug #21503 (Resolved): In Audit record positive (Benchmark): IATF form->Benchmark is not displayed in highlighted field
- In Audit record positive (Benchmark): IATF form->Benchmark is not displayed in highlighted field
- 04:49 PM Bug #21502 (Closed): Document template:Remove the heading and show the breadcrumb alone. Rename the edit concern to Document Template
- Document template:Remove the heading and show the breadcrumb alone. Rename the edit concern to Document Template
- 03:38 PM Bug #21499 (Closed): ToC: Change request: Deletion request: No need to show the additional fields
- ToC: Change request: Deletion request: No need to show the additional fields
- 03:37 PM Bug #21498 (Closed): ToC: Change request: Additional fields: Data is not fetched from the current revision . It asks the user to provide info to all fields again
- ToC: Change request: Additional fields: Data is not fetched from the current revision . It asks the user to provide i...
- 03:34 PM Bug #21497 (Closed): ToC:Change request: Need to remove the origin date in the top part since its been added in addition info part
- ToC:Change request: Need to remove the origin date in the top part since its been added in addition info part
- 03:22 PM Bug #21496 (Closed): Retention period in master screen: Year and month should be in plural form. Done button in the retention period popup needs to show in minimized view
- Retention period in master screen: Year should be in plural form. Done button in the retention period popup needs to ...
- 03:17 PM Bug #21495 (Closed): Category master screen: All columns: Need to implement wrap text if the data has more number of characters
- Category master screen: All columns: Need to implement wrap text if the data has more number of characters
01/27/2021
- 08:03 PM Bug #21470 (Fixed in Dev): Auditee & Auditor approval: Adhoc audit is not display for Responsible person
- 08:03 PM Bug #21469 (Fixed in Dev): Auditee & Auditor approval:Tooltip need to convert as per new requirement in adhoc audit
- 08:03 PM Unit Level and Cosmetic Issues #21468 (Fixed in Dev): Auditee & Auditor approval: Label conversion need to done for Auditee primary contact in audit schedule
- 08:03 PM Bug #21058 (Fixed in Dev): Perform audit -> Preview Report is not working.
- 08:03 PM Bug #20974 (Fixed in Dev): Req:Audit specific Scope and Focus->Responsible person name is displayed as undefined. Duplicate heading is displayed and show all button need to design as per UI Standard
- 08:03 PM Bug #20966 (Fixed in Dev): Req:Audit specific Scope and Focus->Template page->Not able add focus in planned and actual template
- 07:15 PM Bug #21489 (Closed): New document request:Table under reason for req after docs publish: Keep the status column in the right most end
- New document request: Table under reason for req after docs publish: Keep the status column in the right most end
- 07:10 PM Bug #21488 (Closed): New document request: Additional information link color should match with the mandatory alert message color. Need to navigate to additional info link automatically when closing the alert message if possible
- New document request: Additional information link color should match with the mandatory alert message color
- 07:04 PM Bug #21487 (Closed): New document request: Additional info link popup: By default close icon is not displayed
- New document request: Additional info link popup: By default close icon is not displayed
- 05:55 PM Bug #21448 (Fixed in Dev): LPA_Findings Classification Summary / Findings Closure Summary / LPA Findings Summary : 1. Finding aging should be displayed as per below. 0-15 15-30 30-45 … Now its showing 1-15
- There is saperate calculation for 0. Format is like
<=0 is 0
BETWEEN 1 AND 15 is 1-15
BETWEEN 16 AND 30 16-30
BE... - 04:41 PM Bug #21486 (Closed): New document request with reference attachments: After adding the doc with ref attachment in new document request, the reference attachment is not showing any where across ewqims
- New document request with reference attachments: After adding the doc with ref attachment in new document request, th...
- 04:32 PM Bug #21460 (Fixed in Dev): All LPA New Reports - Chart ->"Failure Category Not Found" option is need to like process and department
- 04:30 PM Bug #21485 (Closed): Admin actions:Pending requests:Modify button shows error only for the change requested document which has reference attachments
- Admin actions:Pending requests:Modify button shows error only for the change requested document which has reference a...
- 04:01 PM Bug #21484 (Closed): Doc Pro Settings: Provide one business rule to on and off the additional info for the doc
- Doc Pro Settings: Provide one business rule to on and off the additional info for the doc
01/25/2021
- 04:31 PM Bug #21481 (Yet to Verify): Auditee & Auditor approval: Audit should be displayed for user mention below, when the business rule set as" is all Auditor/Auditee Confirmation Mandatory?"
- Auditee & Auditor approval: Audit should be displayed for user mention below in action page, when the business rule s...
- 01:13 PM Bug #21478 (Fixed in Dev): Adhoc audit is not working in audit schedule
- 01:06 PM Bug #21478 (Open): Adhoc audit is not working in audit schedule
- 12:09 PM Bug #21478 (Resolved): Adhoc audit is not working in audit schedule
- Adhoc audit is not working in audit schedule
- 01:13 PM Bug #21477 (Fixed in Dev): Auditee & Auditor approval require 1st: Audit is not displayed for Auditor and auditee, when business rule is YES in auditor/auditee approval process before Plan Approval
- 01:05 PM Bug #21477 (Open): Auditee & Auditor approval require 1st: Audit is not displayed for Auditor and auditee, when business rule is YES in auditor/auditee approval process before Plan Approval
- 09:33 AM Bug #21477 (Resolved): Auditee & Auditor approval require 1st: Audit is not displayed for Auditor and auditee, when business rule is YES in auditor/auditee approval process before Plan Approval
- Auditee & Auditor approval require 1st: Audit is not displayed for Auditor and auditee, when business rule is YES i...
- 01:13 PM Bug #21476 (Fixed in Dev): List view is not loading in perform audit. This issue occurs randomly
- 01:05 PM Bug #21476 (Open): List view is not loading in perform audit. This issue occurs randomly
- 01:13 PM Bug #21475 (Fixed in Dev): Repeat NC: Mail is not generated
- 01:05 PM Bug #21475 (Open): Repeat NC: Mail is not generated
- 01:13 PM Bug #21474 (Fixed in Dev): Planned audit is not working in audit schedule page
- 01:05 PM Bug #21474 (Open): Planned audit is not working in audit schedule page
- 01:13 PM Bug #21467 (Fixed in Dev): Auditee & Auditor approval : After approval -> Page is not refresh automatically.
- 01:05 PM Bug #21467 (Open): Auditee & Auditor approval : After approval -> Page is not refresh automatically.
- 01:05 PM Bug #21470 (Open): Auditee & Auditor approval: Adhoc audit is not display for Responsible person
- 01:05 PM Bug #21469 (Open): Auditee & Auditor approval:Tooltip need to convert as per new requirement in adhoc audit
- 01:05 PM Unit Level and Cosmetic Issues #21468 (Open): Auditee & Auditor approval: Label conversion need to done for Auditee primary contact in audit schedule
- 09:40 AM Bug #20974 (Not Fixed with Hotfix): Req:Audit specific Scope and Focus->Responsible person name is displayed as undefined. Duplicate heading is displayed and show all button need to design as per UI Standard
01/24/2021
- 08:49 PM Bug #21476 (Resolved): List view is not loading in perform audit. This issue occurs randomly
- List view is not loading in perform audit
- 07:37 PM Bug #21060: Responsible person for Audit report Publish: While click on the report it throw a error as data tables warning error
- Patch is missing in http://ew.omnex.in:1010/EwQIMS/
- 02:19 PM Bug #21475 (Resolved): Repeat NC: Mail is not generated
- Repeat NC: Mail is not generated
- 02:01 PM Bug #21474 (Resolved): Planned audit is not working in audit schedule page
- Planned audit is not working in audit schedule
- 12:20 PM Bug #20966 (Not Fixed with Hotfix): Req:Audit specific Scope and Focus->Template page->Not able add focus in planned and actual template
- kkk
01/22/2021
- 05:47 PM Bug #21470 (Resolved): Auditee & Auditor approval: Adhoc audit is not display for Responsible person
- Auditee & Auditor approval-> Adhoc audit is not display for Responsible person
- 05:20 PM Bug #21469 (Fixed with Hotfix): Auditee & Auditor approval:Tooltip need to convert as per new requirement in adhoc audit
- Auditee & Auditor approval-> Tooltip need to convert as per new requirement in adhoc audit
- 05:14 PM Unit Level and Cosmetic Issues #21468 (Resolved): Auditee & Auditor approval: Label conversion need to done for Auditee primary contact in audit schedule
- Auditee & Auditor approval-> Label conversion need to done for Auditee primary contact in audit schedule
- 04:57 PM Bug #21467 (Fixed with Hotfix): Auditee & Auditor approval : After approval -> Page is not refresh automatically.
- Auditee & Auditor approval -> After approval -> Page is not refresh automatically.
- 04:48 PM Bug #21466 (Resolved): CSD details->Icon should be displayed before Save button
- CSD details->Icon should be displayed before Save button
- 11:36 AM Bug #21058 (Not Fixed with Hotfix): Perform audit -> Preview Report is not working.
- Verified in 1/22/2021
01/21/2021
- 08:29 PM Bug #21464 (Open): All New Reports -> The filter and report is showing data's only for default shift. Other shift data's are not displayed
- 08:28 PM Bug #21464 (Closed): All New Reports -> The filter and report is showing data's only for default shift. Other shift data's are not displayed
- All New Reports -> The filter and report is showing data's only for default shift. Other shift data's are not displayed
- 05:08 PM Bug #21460 (Open): All LPA New Reports - Chart ->"Failure Category Not Found" option is need to like process and department
- 05:08 PM Bug #21460 (Closed): All LPA New Reports - Chart ->"Failure Category Not Found" option is need to like process and department
- All LPA New Reports - Chart ->"Failure Category Not Found" option is need like process and department
- 05:08 PM Bug #21459 (Open): All LPA New Reports - Filters -> Process / Department / Failure Category :: "Data Not Found" option is need to filter the data since the these are optional fields in application
- 05:03 PM Bug #21459 (Closed): All LPA New Reports - Filters -> Process / Department / Failure Category :: "Data Not Found" option is need to filter the data since the these are optional fields in application
- All LPA New Reports - Filters -> Process / Department / Failure Category :: "Data Not Found" option is need to filte...
- 04:45 PM Bug #21455 (Open): All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be displayed in tabular data similar with layer wise chart
- 04:44 PM Bug #21455 (Closed): All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be displayed in tabular data similar with layer wise chart
- All LPA New Reports - Equipment Type Wise NC/OFI -> IF equipment type is same, then consolidated count should be dis...
- 04:26 PM Bug #21454 (Open): All LPA New Reports - Process and Department Tabular View -> Process and department name is not getting displayed based on NC / OFI Mapping for each chart and tabular view in bottom
- 04:25 PM Bug #21454 (Closed): All LPA New Reports - Process and Department Tabular View -> Process and department name is not getting displayed based on NC / OFI Mapping for each chart and tabular view in bottom
- All LPA New Reports - Process and Department Tabular View -> Process and department name is not getting displayed bas...
- 04:26 PM Bug #21453 (Open): All LPA New Reports - In chart View -> No need to show the count 0 as text if respective tabular data is 0
- 04:23 PM Bug #21453 (Closed): All LPA New Reports - In chart View -> No need to show the count 0 as text if respective tabular data is 0
- All LPA New Reports - In chart View -> No need to show the count 0 as text if respective tabular data is 0
- 10:09 AM Bug #9924 (Fixed in Dev): The Legends of the perform audit is displaying in small tips
- 10:09 AM Bug #21022 (In Progress): SP10.5.0 Hotfix -> Perform audit / Upload NC & OFI -> Findings Category is overlapping if more no of character's present
- 10:05 AM Bug #21445 (Fixed in Dev): List view-> Application error is displayed while schedule the audit
- 10:02 AM Bug #21445 (Open): List view-> Application error is displayed while schedule the audit
01/20/2021
- 09:54 PM Bug #21437 (Fixed with Hotfix): All LPA New Reports - Equipment Code Filter should be renamed as "Equipment Category" bot chart and tabular report
- 09:54 PM Bug #21437 (Fixed in Dev): All LPA New Reports - Equipment Code Filter should be renamed as "Equipment Category" bot chart and tabular report
- 09:53 PM Bug #21392 (Fixed with Hotfix): LPA Findings Summary & LPA Findings Classification Summary : Equipment Code Filter : All available data's are not displayed
- 09:52 PM Bug #21392 (Fixed in Dev): LPA Findings Summary & LPA Findings Classification Summary : Equipment Code Filter : All available data's are not displayed
- 09:51 PM Bug #21435 (Fixed with Hotfix): After Fixing Bug #21433 -> Duplicate records are displayed for all new reports
- 09:51 PM Bug #21435 (Fixed in Dev): After Fixing Bug #21433 -> Duplicate records are displayed for all new reports
- 09:50 PM Bug #21433 (Fixed with Hotfix): After Fixing Bug #21432 -> All Findings reports are not showing the data in shift and failure category filters. Unable to check the report / Error displayed while try to view report for
- 09:50 PM Bug #21433 (Fixed in Dev): After Fixing Bug #21432 -> All Findings reports are not showing the data in shift and failure category filters. Unable to check the report / Error displayed while try to view report for
- 09:50 PM Bug #21432 (Fixed with Hotfix): All LPA Findings report is not working / filters are not showing any data
- 09:49 PM Bug #21432 (Fixed in Dev): All LPA Findings report is not working / filters are not showing any data
- 09:33 PM Bug #21395 (Fixed with Hotfix): LPA Findings Summary & Classification Report : All Charts : Label Changes
- 09:33 PM Bug #21395 (Fixed in Dev): LPA Findings Summary & Classification Report : All Charts : Label Changes
- 09:30 PM Bug #21394 (Not Fixed with Hotfix): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 09:29 PM Bug #21394 (Fixed with Hotfix): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 09:29 PM Bug #21394 (Resolved): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 01:23 AM Bug #21394 (Fixed in Dev): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 09:28 PM Bug #21450 (Open): Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- 09:28 PM Bug #21450 (Closed): Requirement -> All LPA Findings Report -> Filters: The following items needed in filter 1. Year 2. Month 3. Status 4. Responsible Person 5. Equipment Code
- Filters: The following items needed in filter
1. Year
2. Month
3. Status
4. Responsible Person
5. Equipment ... - 09:28 PM Bug #21449 (Open): LPA_Findings Closure Summary : All Charts : Color Code is wrong
- 09:25 PM Bug #21449 (Closed): LPA_Findings Closure Summary : All Charts : Color Code is wrong
- All Charts : Color Code is wrong
Completed and closed out - Should be green
Deadline Violated & Closed out - Sho... - 09:27 PM Bug #21272 (Not Fixed with Hotfix): LPA Findings Closure : Filter – Equipment Category : Duplicate Records are displayed
- 09:26 PM Bug #21272 (Fixed with Hotfix): LPA Findings Closure : Filter – Equipment Category : Duplicate Records are displayed
- 12:46 AM Bug #21272 (Fixed in Dev): LPA Findings Closure : Filter – Equipment Category : Duplicate Records are displayed
- 09:26 PM Bug #21273 (Not Fixed with Hotfix): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- 09:26 PM Bug #21273 (Fixed with Hotfix): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- 12:46 AM Bug #21273 (Fixed in Dev): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- 09:23 PM Bug #21448 (Open): LPA_Findings Classification Summary / Findings Closure Summary / LPA Findings Summary : 1. Finding aging should be displayed as per below. 0-15 15-30 30-45 … Now its showing 1-15
- 09:19 PM Bug #21448 (Closed): LPA_Findings Classification Summary / Findings Closure Summary / LPA Findings Summary : 1. Finding aging should be displayed as per below. 0-15 15-30 30-45 … Now its showing 1-15
- Finding aging should be displayed as per below.
0-15
15-30
30-45 …
Now its showing 1-15
- 09:23 PM Bug #21447 (Open): All New Reports -> Label Changes: 1. Findings Ageing should be renamed as "Findings Aging" 2. Chart : Findings Wise NC & OFI should be renamed as " Findings Category wise NC & OFI"
- 09:18 PM Bug #21447 (Closed): All New Reports -> Label Changes: 1. Findings Ageing should be renamed as "Findings Aging" 2. Chart : Findings Wise NC & OFI should be renamed as " Findings Category wise NC & OFI"
- Label Changes:
1. Findings Ageing should be renamed as "Findings Aging"
2. Chart : Findings Wise NC & OFI should be... - 09:10 PM Bug #21402 (Fixed with Hotfix): LPA Findings Classification Summary : All Charts -> Tabular data's are not displaying as per specification. Only Count is displayed. The information "Count of Status" is missing
- 01:31 AM Bug #21402 (Fixed in Dev): LPA Findings Classification Summary : All Charts -> Tabular data's are not displaying as per specification. Only Count is displayed. The information "Count of Status" is missing
- 09:09 PM Bug #21401 (Fixed with Hotfix): LPA Findings Classification Summary : ShiftWise and Failure Category Wise NC/OFI & Correction Closeout chart is missing (As per requirement)
- 09:09 PM Bug #21401 (Resolved): LPA Findings Classification Summary : ShiftWise and Failure Category Wise NC/OFI & Correction Closeout chart is missing (As per requirement)
- 01:28 AM Bug #21401 (Fixed in Dev): LPA Findings Classification Summary : ShiftWise and Failure Category Wise NC/OFI & Correction Closeout chart is missing (As per requirement)
- 09:08 PM Bug #21400 (Fixed with Hotfix): LPA Findings Summary & Classification Report : Summary report in bottom : Various issues in this tabular format
- 01:27 AM Bug #21400 (Fixed in Dev): LPA Findings Summary & Classification Report : Summary report in bottom : Various issues in this tabular format
- 09:07 PM Bug #21398 (Fixed with Hotfix): LPA Findings Summary & Classification Report : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- 01:26 AM Bug #21398 (Fixed in Dev): LPA Findings Summary & Classification Report : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- 09:07 PM Bug #21278 (Fixed with Hotfix): LPA_FindingsClosure : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- 12:52 AM Bug #21278 (Fixed in Dev): LPA_FindingsClosure : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- 09:05 PM Bug #21396 (Fixed with Hotfix): LPA Findings Summary & Classification Report : ALL Chart View : Total count and status count is not displayed
- 01:25 AM Bug #21396 (Fixed in Dev): LPA Findings Summary & Classification Report : ALL Chart View : Total count and status count is not displayed
- 09:05 PM Bug #21397 (Fixed with Hotfix): LPA Findings Summary Chart : ShiftWise Pareto report is missing (As per requirement)
- 01:25 AM Bug #21397 (Fixed in Dev): LPA Findings Summary Chart : ShiftWise Pareto report is missing (As per requirement)
- 09:02 PM Bug #21393 (Fixed with Hotfix): LPA Findings Summary / Classification : Overall NC & OFI Count Chart and NC Aging tabular report is missing (As Per Requirement)
- 01:23 AM Bug #21393 (Fixed in Dev): LPA Findings Summary / Classification : Overall NC & OFI Count Chart and NC Aging tabular report is missing (As Per Requirement)
- 08:51 PM Bug #21391 (Fixed with Hotfix): LPA Findings Summary & LPA Findings Classification Summary : Equipment Type Filter : Irrelevant data's are displayed (Only Special characters data which is not available in equipment type list)
- 01:05 AM Bug #21391 (Fixed in Dev): LPA Findings Summary & LPA Findings Classification Summary : Equipment Type Filter : Irrelevant data's are displayed (Only Special characters data which is not available in equipment type list)
- 08:51 PM Bug #21286 (Fixed with Hotfix): LPA_Findings Closure & LPA Findings Summary & Classification Report : Drill Indication – Hand icon is not displaying on chart for equipment wise NC/OFI
- 01:03 AM Bug #21286 (Fixed in Dev): LPA_Findings Closure & LPA Findings Summary & Classification Report : Drill Indication – Hand icon is not displaying on chart for equipment wise NC/OFI
- 08:50 PM Bug #21285 (Fixed with Hotfix): LPA_Findings Closure & LPA Findings Summary & Classification Report :All chars and tabular View : Responsible person name should be displayed as per web application ( As per settings)
- 01:01 AM Bug #21285 (Fixed in Dev): LPA_Findings Closure & LPA Findings Summary & Classification Report :All chars and tabular View : Responsible person name should be displayed as per web application ( As per settings)
- 08:50 PM Bug #21284 (Fixed with Hotfix): LPA_Findings Closure : All charts : The status is not showing as per application (All Status).. In application 7 Not closed out and 2 closed out data's are there. But in report not closed out 8, closed out 0 is displaying.
- 01:01 AM Bug #21284 (Fixed in Dev): LPA_Findings Closure : All charts : The status is not showing as per application (All Status).. In application 7 Not closed out and 2 closed out data's are there. But in report not closed out 8, closed out 0 is displaying.
- 08:49 PM Bug #21281 (Fixed with Hotfix): LPA_FindingsClosure : Summary Report In bottom : Days Taken / Exceeded to close the nc : The showing data is not relevant with actual days
- 12:54 AM Bug #21281 (Fixed in Dev): LPA_FindingsClosure : Summary Report In bottom : Days Taken / Exceeded to close the nc : The showing data is not relevant with actual days
- 08:49 PM Bug #21283 (Fixed with Hotfix): LPA_FindingsClosure : Chart : Shiftwise Pareto report is missing (As per requirement)
- 12:58 AM Bug #21283 (Fixed in Dev): LPA_FindingsClosure : Chart : Shiftwise Pareto report is missing (As per requirement)
- 08:49 PM Bug #21282 (Fixed with Hotfix): LPA_FindingsClosure : Summary Report In bottom: The below column name has to change
- 12:58 AM Bug #21282 (Fixed in Dev): LPA_FindingsClosure : Summary Report In bottom: The below column name has to change
- 08:48 PM Bug #21280 (Fixed with Hotfix): LPA_Findings Closure - Summary Report In bottom : Problem on viewing data's
- 12:53 AM Bug #21280 (Fixed in Dev): LPA_Findings Closure - Summary Report In bottom : Problem on viewing data's
- 08:47 PM Bug #21279 (Fixed with Hotfix): LPA_Findings Closure : Summary Report In bottom : Only one record is displayed. But in chart couple of data’s available
- 12:52 AM Bug #21279 (Fixed in Dev): LPA_Findings Closure : Summary Report In bottom : Only one record is displayed. But in chart couple of data’s available
- 08:47 PM Bug #21276 (Fixed with Hotfix): LPA_FindingsClosure : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 12:50 AM Bug #21276 (Fixed in Dev): LPA_FindingsClosure : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 08:47 PM Bug #21277 (Fixed with Hotfix): LPA_FindingsClosure : All Charts View : Total count and status count is not displayed
- 12:51 AM Bug #21277 (Fixed in Dev): LPA_FindingsClosure : All Charts View : Total count and status count is not displayed
- 08:45 PM Bug #21275 (Fixed with Hotfix): LPA_FindingsClosure : All Charts : Label Changes
- 12:50 AM Bug #21275 (Fixed in Dev): LPA_FindingsClosure : All Charts : Label Changes
- 08:44 PM Bug #21274 (Fixed with Hotfix): LPA_FindingsClosure : Filter – Category : Relevant data’s are not displayed
- 12:47 AM Bug #21274 (Fixed in Dev): LPA_FindingsClosure : Filter – Category : Relevant data’s are not displayed
- 08:43 PM Bug #21270 (Fixed with Hotfix): LPA_Findings Closure : Filters -> Wrong Data’s are displayed in Equipment Type & Equipment Code
- 12:45 AM Bug #21270 (Fixed in Dev): LPA_Findings Closure : Filters -> Wrong Data’s are displayed in Equipment Type & Equipment Code
- 08:14 PM Bug #21443 (Open): All LPA New Reports - Manually identified NC and OFI count and Correction and closed out by auditor count (Manually Identified) is not displayed in report
- 08:14 PM Bug #21440 (Open): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 07:54 PM Bug #21018 (Fixed in Dev): SP10.5.0 Hotfix -> Label Changes in audit pro
- 07:41 PM Usability #21229 (Resolved): 10.5.0 hotfix-> Need to remove and add the manadatory in Audit pro
- 12:44 AM Bug #17063 (Fixed in Dev): LPA Report : System is displaying Duplicate equipment code in Equipment code drop down though i have not created Equipment code with such name
- 12:43 AM Bug #17056 (Fixed in Dev): LPA Report : Findings classification report is displaying the wrong data of completed and Not Closed out findings
- 12:42 AM Bug #17046 (Fixed in Dev): LPA Report : Findings Summary and Findings closer Summary reports both the Closed status is displaying with different color and Need legend status for Both reports
01/19/2021
- 09:38 PM Bug #17055 (Fixed in Dev): LPA Reports : Findings Classification summary report is displaying only list of NC only but not OFI's
- 09:35 PM Bug #17045 (Fixed in Dev): LPA Reports : Findings Classification Summary report display header name fully as "Responsible person wise"
- 09:31 PM Bug #17044 (Fixed in Dev): LPA Reports : Findings Classification Summary report is displaying Process blank when there is no process mapped.
- 08:42 PM Bug #16943 (Fixed in Dev): LPA Reports : LPA Findings classification summary And Closure summary reports are displaying error.
- 04:26 PM Bug #21445 (Resolved): List view-> Application error is displayed while schedule the audit
- List view-> Application error is displayed while schedule the audit
Also available in: Atom