Activity
From 10/28/2019 to 11/26/2019
11/25/2019
- 08:03 PM Bug #14344 (Not Resolved): Production OEE(Die Life Cycle): When the actual quantity(1065) exceeded from the life cycle count(1000), the part details is not showing in the screen
- 08:02 PM Bug #14043 (Closed): Die --> No need separate label for Imported Manufacturer checkbox. While placing the cursor in checkbox, the system should display the tooltip as Imported Manufacturer
- 08:02 PM Bug #14048 (Closed): Equipment Part - Die Linkage: Die Name--> When a user tries to select the multiple die name and unselect few from the list. It is not working as expected.
- 08:02 PM Bug #14077 (Closed): Production OEE: When booking the Production OEE for Assembly Line, it should not display the assembly line selection field as "Equipment Name/Equipment Code"
- 08:01 PM Bug #14145 (Closed): Equipment: without entering the text value in Asset Number and tries to save the Equipment master details, it should display the alert message
- 08:01 PM Bug #14283 (Closed): Equipment: Asset Number--> When entering more than 10 characters and saving the details, the system getting hanged and also alert message is not displayed
- 08:01 PM Bug #14295 (Closed): Equipment: Asset Number field--> It should not accept the same asset number for different equipment
- 08:01 PM Bug #14299 (Closed): Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected
- 08:01 PM Bug #14347 (Closed): Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the classification of the die
- 08:00 PM Bug #14349 (Closed): Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert message is not displayed and also not redirecting to the die master screen
- 08:00 PM Bug #14374 (Closed): Business Rule: Target Value settings--> Unit of measurement field is missing
- 08:00 PM Bug #14375 (Closed): Business Rule--> Target value-->Need to capture Overall target value for the individual report
- 08:00 PM Unit Level and Cosmetic Issues #14377 (Closed): Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- 07:59 PM Bug #14386 (Closed): Business Rule: Reminder setting tab--> The system should not display the duration value "Zero" as default
- 07:59 PM Bug #14598 (Closed): PM Supervisor calendar(Weekly view): Rescheduled WO is not showing in weekly view, but displays in monthly view
- 07:59 PM Bug #14610 (Closed): PM Calendar: The assigned WO is not showing in Weekly view.
- 07:59 PM Unit Level and Cosmetic Issues #14648 (Closed): Breakdown Request: Need option to enter more than 255 characters in breakdown description
- 07:58 PM Bug #14652 (Closed): Utility Equipment: Utility Equipment: while creating the utility equipment, entered equipment details of Vendor, manufacturer, criticality, commission date and production date is not getting saved
- 07:58 PM Bug #14867 (Closed): Die--> Die proving date : The alert label Commission Date not entered should be renamed to "Die Proving date"
- 07:58 PM Unit Level and Cosmetic Issues #14868 (Closed): Customize Email message: Duplicate basic field is not showing in the customize email message
- 07:57 PM Bug #14875 (Closed): Equipment skill matrix and Die skill matrix: The user is not showing in the Equipment and die skill matrix screen
- 10:07 AM Bug #14593 (Closed): Acceptance Quality Limit : By default not displaying any data,user need to select the Inspection Mode for viewing data
- 10:07 AM Bug #14593 (Resolved): Acceptance Quality Limit : By default not displaying any data,user need to select the Inspection Mode for viewing data
11/21/2019
11/20/2019
- 03:51 PM Bug #14875 (Fixed with Hotfix): Equipment skill matrix and Die skill matrix: The user is not showing in the Equipment and die skill matrix screen
- 03:46 PM Bug #14873 (Closed): (Equipment and Die)Equipment Activity and PM Supervisor Calendar: The system should not allow user to delete the activity of completed WO
- 03:30 PM Unit Level and Cosmetic Issues #14868 (Fixed with Hotfix): Customize Email message: Duplicate basic field is not showing in the customize email message
- 03:25 PM Bug #14867 (Fixed with Hotfix): Die--> Die proving date : The alert label Commission Date not entered should be renamed to "Die Proving date"
- 03:24 PM Bug #14652 (Fixed with Hotfix): Utility Equipment: Utility Equipment: while creating the utility equipment, entered equipment details of Vendor, manufacturer, criticality, commission date and production date is not getting saved
- 03:22 PM Unit Level and Cosmetic Issues #14648 (Fixed with Hotfix): Breakdown Request: Need option to enter more than 255 characters in breakdown description
- 03:02 PM Bug #14610 (Fixed with Hotfix): PM Calendar: The assigned WO is not showing in Weekly view.
- 02:52 PM Bug #14598 (Fixed with Hotfix): PM Supervisor calendar(Weekly view): Rescheduled WO is not showing in weekly view, but displays in monthly view
- 02:47 PM Bug #14580 (Not Fixed with Hotfix): PM Supervisor Calendar: PM Supervisor calendar and PM Calendar: The Scheduled, assigned, completed and completed with deadline violate status is not showing in the Planned maintenance detail work order status field as well as in tooltip work order status
- 02:33 PM Bug #14549 (Not Fixed with Hotfix): Equipment: Without selecting the Equipment category field, the system displays alert like " Please select Equipment master". It should display the alert like "Please select Equipment category"
- 02:32 PM Bug #14375 (Fixed with Hotfix): Business Rule--> Target value-->Need to capture Overall target value for the individual report
- 02:31 PM Bug #14374 (Fixed with Hotfix): Business Rule: Target Value settings--> Unit of measurement field is missing
- 02:26 PM Bug #14299 (Fixed with Hotfix): Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected
- 02:24 PM Bug #14077 (Fixed with Hotfix): Production OEE: When booking the Production OEE for Assembly Line, it should not display the assembly line selection field as "Equipment Name/Equipment Code"
- 02:08 PM Bug #14048 (Fixed with Hotfix): Equipment Part - Die Linkage: Die Name--> When a user tries to select the multiple die name and unselect few from the list. It is not working as expected.
11/19/2019
- 06:34 PM Bug #14047 (Closed): Equipment Part Linkage: Not able to map the parts for the selected assembly line.
- 06:34 PM Bug #14140 (Closed): PM Supervisor calendar: The selected activity is not getting displayed in the planned maintenance Activity field
- 06:34 PM Bug #14378 (Closed): Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- 05:16 PM Bug #14597 (Resolved): Why Risk level has drop down selection as well as multiple option checkbox? it is contadictory
- 05:15 PM Bug #14602 (Resolved): Where can i see the reason entered in reason text box while checking risk level option (fully qualified/conditionlay qualified/not qualified)
- In log
- 05:14 PM Bug #14725 (Resolved): No validation alert in part adding screen if supplier type(new vendor....) has no part type created.
- 05:13 PM Bug #14718 (Resolved): Unable to add part in supplier creation page.No add button available automatically in part section,once Supplier is selected as fully qualified.
- 04:02 PM Bug #14867 (Resolved): Die--> Die proving date : The alert label Commission Date not entered should be renamed to "Die Proving date"
- 03:56 PM Bug #14299 (Resolved): Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected
- 03:46 PM Bug #14549 (Resolved): Equipment: Without selecting the Equipment category field, the system displays alert like " Please select Equipment master". It should display the alert like "Please select Equipment category"
- 03:44 PM Bug #14077 (Resolved): Production OEE: When booking the Production OEE for Assembly Line, it should not display the assembly line selection field as "Equipment Name/Equipment Code"
- 03:43 PM Bug #14375 (Resolved): Business Rule--> Target value-->Need to capture Overall target value for the individual report
- 03:43 PM Bug #14374 (Resolved): Business Rule: Target Value settings--> Unit of measurement field is missing
- 03:42 PM Bug #14372 (Resolved): Business Rule: Target Value settings--> Target value may be 35.6, here not able to enter the value in the field
- 03:38 PM Bug #14873 (Resolved): (Equipment and Die)Equipment Activity and PM Supervisor Calendar: The system should not allow user to delete the activity of completed WO
- 03:28 PM Bug #14794 (Resolved): Checklists->if any score has set as N/A,then during fill checklists if score for N/A is selected then unable to submit the checklists "Please fill chcekpoint" alert is getting displayed,Green tick also not applier if N/A value is selected
- 03:12 PM Bug #14875 (Resolved): Equipment skill matrix and Die skill matrix: The user is not showing in the Equipment and die skill matrix screen
- 03:12 PM Unit Level and Cosmetic Issues #14868 (Resolved): Customize Email message: Duplicate basic field is not showing in the customize email message
- 02:37 PM Bug #14589 (Fixed with Hotfix): Deleting checklists have checkpoint cause server error
- Working fine
- 02:36 PM Bug #13954 (Known Issue): Server when session time out.When the url not in use for some time and tried to log out,server error is displaying.Please refer screen shot
- 02:36 PM Bug #13954 (Open): Server when session time out.When the url not in use for some time and tried to log out,server error is displaying.Please refer screen shot
- 02:35 PM Bug #13809 (Fixed with Hotfix): No segment 1&2,3,4 audit program by default in supplier portal.Audit program,audit type's of audit pro module should not be listing in supplier portal menu(audit program/audit type)
- Working fine
- 11:31 AM Bug #13809 (Resolved): No segment 1&2,3,4 audit program by default in supplier portal.Audit program,audit type's of audit pro module should not be listing in supplier portal menu(audit program/audit type)
- Can you able to replicate?
- 02:34 PM Bug #14590 (Fixed with Hotfix): Assigning score for a parent checklists not applied to its checkpoint(child's)
- Working fine
- 02:34 PM Bug #14487 (Fixed with Hotfix): Supplier MGMT:Improper validation alert if not selecting plant name."Enter or select plant name" should display instead it is displaying "Enter level value" though it has specified
- Working fine
- 02:33 PM Bug #14605 (Fixed with Hotfix): Supplier template selection in Supplier creation screen should reflect in part listing page and schedule audit page and engagement screen for change
- Working fine
- 02:33 PM Bug #14595 (Fixed with Hotfix): Unable to select/edit supplier template during update scheduled audit.No drop down is available
- Working fine
- 02:33 PM Bug #14607 (Fixed with Hotfix): Unable to do VAM audit as no checklists details are showing for VAM checklisst(selected Class A template)
- Working fine
- 02:32 PM Bug #14636 (Fixed with Hotfix): VEM audit-Daily->Duplicate audit generated for routine audit
- Working fine
- 02:32 PM Bug #14745 (Fixed with Hotfix): Supplier Management: Automatic VQI rights function->Issue 1: Unable to do perform audit as no options available as "Perform audit" menu, Issue 2: Through actions it shows server error
- Working fine
- 02:31 PM Bug #14797 (Fixed with Hotfix): Perform audit screen->No Repeat audit is generated with respect to the start date and end date
- Working fine
- 12:38 PM Bug #14797 (Resolved): Perform audit screen->No Repeat audit is generated with respect to the start date and end date
- 12:38 PM Bug #14795 (Resolved): Perform audit->VAM score status (approved/conditionally approved/rejected) is wrong against with Score logic settings
- IT is calculated based on 2 conditional Point based on Screenshot. Duplicate Issue Of SP920
- 12:36 PM Bug #14637 (Resolved): VEM->No CAR forms loading properly during corrective action
- Duplicate : 14963
- 11:30 AM Bug #13925 (Resolved): 404 File or directory not found occurred if checklists has not filled and directly submitted to auditee with "No NC" audit status
- 11:03 AM Bug #14798 (Resolved): Perform audit->if audit status is NO NC then during submit to auditee,checklists details section showing Rejected status in bottom as no NC and No conditional points
11/18/2019
- 09:41 PM Bug #14808 (Closed): Inprocess Inspection : Data is not displaying in Inspection sheet if Multi-Operations are enabled in IC settings
- 09:41 PM Bug #14808 (Fixed with Hotfix): Inprocess Inspection : Data is not displaying in Inspection sheet if Multi-Operations are enabled in IC settings
- 09:41 PM Bug #14711 (Closed): Inprocess Inspection : Inspection sheet is not opening
- 09:41 PM Bug #14711 (Fixed with Hotfix): Inprocess Inspection : Inspection sheet is not opening
- 07:09 PM Bug #14768 (Closed): Gage Information : Few of the details are not displaying
- 07:09 PM Bug #14768 (Fixed with Hotfix): Gage Information : Few of the details are not displaying
- 05:13 PM Bug #14757 (Closed): Final Inspection Scheduling : Unable to schedule the same part number for multiple dates
- 05:13 PM Bug #14757 (Fixed with Hotfix): Final Inspection Scheduling : Unable to schedule the same part number for multiple dates
11/14/2019
- 06:15 PM Unit Level and Cosmetic Issues #14654 (Closed): Equipment Element --> Sorting is not working as expected
- 06:12 PM Bug #14730 (Not Resolved): PM Supervisor calendar(Maintenance Team)--> In activity user field, without showing the assigned person details, it displays the logged in person detail in user drop down field
- 06:03 PM Bug #14733 (Closed): PM Supervisor calendar: The mapped spare part for the activity is not showing in the Planned maintenance listing screen
- 05:59 PM Bug #14875 (Open): Equipment skill matrix and Die skill matrix: The user is not showing in the Equipment and die skill matrix screen
- 05:59 PM Bug #14873 (Open): (Equipment and Die)Equipment Activity and PM Supervisor Calendar: The system should not allow user to delete the activity of completed WO
- 05:59 PM Unit Level and Cosmetic Issues #14871 (Open): Business Rule and Planned Maintenance: If the delay day is "0", Not completed status is showing for the current WO
- 05:59 PM Bug #14869 (Open): Equipment: Manufacturing and Non Manufacturing Line--> if the WO is not generated for the created Equipment, it should allow user to delete the Manufacturing line and assembly Line
- 05:59 PM Unit Level and Cosmetic Issues #14868 (Open): Customize Email message: Duplicate basic field is not showing in the customize email message
- 05:59 PM Bug #14867 (Open): Die--> Die proving date : The alert label Commission Date not entered should be renamed to "Die Proving date"
- 05:59 PM Bug #14861 (Open): Production OEE: if removing the die rights, the losses list is not showing in the Production OEE screen. Once clicking on the Part tab, it displayed the existing data
- 05:59 PM Bug #14740 (Closed): PM Calendar: Team--> Activity detail is not showing in the maintenance calendar
- 05:45 PM Bug #14752 (Closed): Production OEE: Losses list displays as twice in overall shift tab
- 02:57 PM Bug #14759 (Closed): Inspection Sheet : No validation available on clicking Submit button
- 02:57 PM Bug #14759 (Fixed with Hotfix): Inspection Sheet : No validation available on clicking Submit button
- 02:56 PM Bug #14769 (Closed): Final Inspection :Unable to select multiple operations in Inspection Entry Pop-up even though multi-operation is enabled is IC settings
- 02:22 PM Bug #14811 (Closed): Inspection Sheet : Unable to Accept/Reject the lot.Shows popup "Please select Approver" even though approver is selected
- 02:21 PM Bug #14753 (Closed): Getting server error pop-up on clicking on Characteristics or Gage Hyperlink in Inspection sheet
- 02:21 PM Bug #14753 (Fixed with Hotfix): Getting server error pop-up on clicking on Characteristics or Gage Hyperlink in Inspection sheet
- 02:20 PM Bug #14703 (Closed): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 02:20 PM Bug #14703 (Fixed with Hotfix): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 02:20 PM Bug #14755 (Closed): Receiving Inspection Scheduling : Completed items are not displaying on search
- 10:52 AM Bug #14707 (Closed): Inspection Parameters:Defect phenomenon should be replaced with Defect
- 10:52 AM Bug #14683 (Closed): Inspection Parameters->Characteristics Grid->Search by Defect Phenomenon not working
- 10:51 AM Bug #14758 (Closed): Inspection Sheet : Approver details not getting saved
- 10:51 AM Bug #14706 (Closed): Production items are not loading in Search Inspection Entry
- 10:50 AM Bug #14700 (Closed): Inspection sheet : Getting server error on clicking on Gage hyperlink
- 10:49 AM Bug #14684 (Closed): Defect : Search by Defect spec is not working
- 10:48 AM Bug #14682 (Closed): Inspection form std : Search by Notification interval is not working
- 10:48 AM Bug #14679 (Closed): Inspection form std : Unable to delete multiple records
- 10:48 AM Bug #14666 (Closed): Inspection Sheet : Error pop-up displaying on clicking save button
- 10:47 AM Bug #14664 (Closed): Inspection sheet is not opening on clicking submit button in Inspection Entry pop-up
- 10:47 AM Bug #14616 (Closed): Part Equipment Mapping : Page is not Opening
- 10:47 AM Bug #14614 (Closed): Inspection form std : Data not getting saved on clicking on save button
- 10:47 AM Bug #14613 (Closed): Inspection Form Std : Sample frequency is not listing in the drop down
- 10:46 AM Bug #14588 (Closed): Defect : DefectSpec Label Issue
11/13/2019
- 12:46 PM Bug #14577 (Closed): PM Supervisor Calendar: When scheduling the WO for an Equipment, the dummy actual WO scheduled in W1(Jan) and also the WO for the Next week is not generated. Kindly refer screenshot
- 12:43 PM Bug #14549 (Not Resolved): Equipment: Without selecting the Equipment category field, the system displays alert like " Please select Equipment master". It should display the alert like "Please select Equipment category"
- 12:35 PM Bug #14546 (Not Resolved): Equipment: Status related issues(In use, Not in Use and Discard from asset)
- 12:19 PM Bug #14542 (Closed): Trade: Trade menu showing twice in TPM setup tab
- 12:16 PM Bug #14505 (Closed): Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field, the system redirecting to the Manufacturing line and also the name of the top two fields displays as "Category"
- 12:11 PM Unit Level and Cosmetic Issues #14462 (Closed): Equipment: When tries to edit the same equipment name, it displays alert like "Similar name exists do you want to continue?"if clicking on Ok button, the page should get refresh automatically
- 12:06 PM Bug #14375 (Not Resolved): Business Rule--> Target value-->Need to capture Overall target value for the individual report
- 12:05 PM Bug #14374 (Not Resolved): Business Rule: Target Value settings--> Unit of measurement field is missing
- 12:03 PM Bug #14372 (Not Resolved): Business Rule: Target Value settings--> Target value may be 35.6, here not able to enter the value in the field
- 12:00 PM Bug #14358 (Closed): Equipment Part-Die Linkage: The system should not allow user to map the Expired die for the selected Equipment-Part linkage
- 11:49 AM Bug #14299 (Not Resolved): Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected
- 11:39 AM Bug #14139 (Closed): PM Calendar: Planned Maintenance list-->The assigned user name details is not showing in the Activity's user list pop up window
- 11:37 AM Bug #14137 (Closed): PM Supervisor Calendar: The system should not display default selection as days in Activity duration description
- 11:36 AM Bug #14129 (Closed): PM Supervisor and Die PM Supervisor Calendar: The status of planned maintenance should display the status which is showing in the calendar
- 11:29 AM Bug #14092 (Closed): Production OEE: When a user tries to Edit the Parts production record, the setup dropdown field displays as Empty field.
- 11:19 AM Bug #14072 (Closed): Equipment Part - Die Linkage: When a user tries to delete the part which is linked with die details and select the same part. The system is showing the existing selected die details for same selected part
11/12/2019
- 05:55 PM Bug #14875 (Closed): Equipment skill matrix and Die skill matrix: The user is not showing in the Equipment and die skill matrix screen
- Equipment skill matrix and Die skill matrix: The user is not showing in the Equipment and die skill matrix screen
- 05:16 PM Bug #14873 (Closed): (Equipment and Die)Equipment Activity and PM Supervisor Calendar: The system should not allow user to delete the activity of completed WO
- Equipment Activity and PM Supervisor Calendar: The system should not allow user to delete the activity of completed WO
- 01:40 PM Bug #14375 (Resolved): Business Rule--> Target value-->Need to capture Overall target value for the individual report
- 01:39 PM Bug #14374 (Resolved): Business Rule: Target Value settings--> Unit of measurement field is missing
- 12:25 PM Unit Level and Cosmetic Issues #14871 (Open): Business Rule and Planned Maintenance: If the delay day is "0", Not completed status is showing for the current WO
- Business Rule and Planned Maintenance: If the delay day is "0", Not completed status is showing for the current WO.
...
11/11/2019
- 03:10 PM Bug #14869 (Open): Equipment: Manufacturing and Non Manufacturing Line--> if the WO is not generated for the created Equipment, it should allow user to delete the Manufacturing line and assembly Line
- Equipment: Manufacturing and Non Manufacturing Line--> if the WO is not generated for the created Equipment, it shoul...
- 02:36 PM Unit Level and Cosmetic Issues #14868 (Closed): Customize Email message: Duplicate basic field is not showing in the customize email message
- Customize Email message: Duplicate basic field is not showing in the customize email message
- 02:11 PM Bug #14867 (Closed): Die--> Die proving date : The alert label Commission Date not entered should be renamed to "Die Proving date"
- Die--> Die proving date : The alert label Commission Date not entered should be renamed to "Die Proving date"
11/08/2019
- 01:30 PM Bug #14344 (Resolved): Production OEE(Die Life Cycle): When the actual quantity(1065) exceeded from the life cycle count(1000), the part details is not showing in the screen
- Not able to replicate.
- 01:23 PM Bug #14358 (Resolved): Equipment Part-Die Linkage: The system should not allow user to map the Expired die for the selected Equipment-Part linkage
- checkbox will be disable once expired.
- 01:01 PM Bug #14064 (Resolved): Equipment Part - Die Linkage: When a user tries to delete the part for assembly line, it should get delete from the Equipment which is created under the assembly line
- Not an issue. Assembly line part linkage is different with equipment.
- 01:00 PM Bug #14072 (Resolved): Equipment Part - Die Linkage: When a user tries to delete the part which is linked with die details and select the same part. The system is showing the existing selected die details for same selected part
- 12:59 PM Bug #14768: Gage Information : Few of the details are not displaying
- Kindly discuss with MSA team and add the Gage parameters for the respective gages.
- 12:44 PM Bug #14593 (In Progress): Acceptance Quality Limit : By default not displaying any data,user need to select the Inspection Mode for viewing data
- 12:00 PM Bug #14048 (Resolved): Equipment Part - Die Linkage: Die Name--> When a user tries to select the multiple die name and unselect few from the list. It is not working as expected.
- Not an issue. Die will be deleted through grid only not by uncheck in Tree.
11/07/2019
- 07:05 PM Bug #14092 (Resolved): Production OEE: When a user tries to Edit the Parts production record, the setup dropdown field displays as Empty field.
- 06:28 PM Bug #14139 (Resolved): PM Calendar: Planned Maintenance list-->The assigned user name details is not showing in the Activity's user list pop up window
- 06:27 PM Bug #14137 (Resolved): PM Supervisor Calendar: The system should not display default selection as days in Activity duration description
- 05:16 PM Bug #14598 (Resolved): PM Supervisor calendar(Weekly view): Rescheduled WO is not showing in weekly view, but displays in monthly view
- 05:15 PM Bug #14580 (Resolved): PM Supervisor Calendar: PM Supervisor calendar and PM Calendar: The Scheduled, assigned, completed and completed with deadline violate status is not showing in the Planned maintenance detail work order status field as well as in tooltip work order status
- 04:40 PM Bug #14730 (Resolved): PM Supervisor calendar(Maintenance Team)--> In activity user field, without showing the assigned person details, it displays the logged in person detail in user drop down field
- 03:56 PM Bug #14861 (Open): Production OEE: if removing the die rights, the losses list is not showing in the Production OEE screen. Once clicking on the Part tab, it displayed the existing data
- Production OEE: if removing the die rights, the losses list is not showing in the Production OEE screen. Once clickin...
- 03:03 PM Bug #14811 (Resolved): Inspection Sheet : Unable to Accept/Reject the lot.Shows popup "Please select Approver" even though approver is selected
- 02:51 PM Bug #14811 (Open): Inspection Sheet : Unable to Accept/Reject the lot.Shows popup "Please select Approver" even though approver is selected
- 03:02 PM Bug #14769 (Resolved): Final Inspection :Unable to select multiple operations in Inspection Entry Pop-up even though multi-operation is enabled is IC settings
- 02:51 PM Bug #14769 (Open): Final Inspection :Unable to select multiple operations in Inspection Entry Pop-up even though multi-operation is enabled is IC settings
- 03:01 PM Bug #14707 (Resolved): Inspection Parameters:Defect phenomenon should be replaced with Defect
- 02:51 PM Bug #14808 (Open): Inprocess Inspection : Data is not displaying in Inspection sheet if Multi-Operations are enabled in IC settings
- 02:51 PM Bug #14796 (Open): NXP->Cummins Report:Auditor & Auditee contact person name are displayed incorrect in cummins Report
- 02:51 PM Bug #14768 (Open): Gage Information : Few of the details are not displaying
- 01:40 PM Bug #14740 (Resolved): PM Calendar: Team--> Activity detail is not showing in the maintenance calendar
- 12:13 AM Bug #14706 (Resolved): Production items are not loading in Search Inspection Entry
11/06/2019
- 11:55 PM Bug #14755 (Resolved): Receiving Inspection Scheduling : Completed items are not displaying on search
- 11:37 PM Bug #14758 (Resolved): Inspection Sheet : Approver details not getting saved
- 08:24 PM Bug #14733 (Resolved): PM Supervisor calendar: The mapped spare part for the activity is not showing in the Planned maintenance listing screen
- 06:30 PM Bug #14752 (Resolved): Production OEE: Losses list displays as twice in overall shift tab
- 04:57 PM Bug #14577 (Resolved): PM Supervisor Calendar: When scheduling the WO for an Equipment, the dummy actual WO scheduled in W1(Jan) and also the WO for the Next week is not generated. Kindly refer screenshot
- 04:47 PM Unit Level and Cosmetic Issues #14648 (Resolved): Breakdown Request: Need option to enter more than 255 characters in breakdown description
- 04:02 PM Unit Level and Cosmetic Issues #14654 (Resolved): Equipment Element --> Sorting is not working as expected
- Issue 3 : Not an issue .Tool limitation.
- 02:53 PM Unit Level and Cosmetic Issues #14462 (Resolved): Equipment: When tries to edit the same equipment name, it displays alert like "Similar name exists do you want to continue?"if clicking on Ok button, the page should get refresh automatically
- Not an issue. If we refresh the page it will clear all the data entered.
- 01:54 PM Bug #14546 (Resolved): Equipment: Status related issues(In use, Not in Use and Discard from asset)
- 01:46 PM Bug #14610 (Resolved): PM Calendar: The assigned WO is not showing in Weekly view.
- 12:59 PM Bug #14505 (Resolved): Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field, the system redirecting to the Manufacturing line and also the name of the top two fields displays as "Category"
- 12:42 PM Bug #14542 (Resolved): Trade: Trade menu showing twice in TPM setup tab
- 12:41 PM Bug #14652 (Resolved): Utility Equipment: Utility Equipment: while creating the utility equipment, entered equipment details of Vendor, manufacturer, criticality, commission date and production date is not getting saved
- 12:30 PM Bug #14549 (Resolved): Equipment: Without selecting the Equipment category field, the system displays alert like " Please select Equipment master". It should display the alert like "Please select Equipment category"
11/05/2019
- 05:42 PM Bug #14102 (Resolved): Design VDA - Structure Analysis - Level marker remains same for all the Levels even after Expand/Collapse is done. (Refer Description)
- 05:41 PM Bug #14105 (Resolved): Design VDA - Structure Analysis - By Default system displays wrong count in 'From Component Level'
- 05:41 PM Bug #14172 (Resolved): Design and Process VDA - After refreshing the page, colour for Risk and Optimization changes to Red even for High values
- 03:34 PM Bug #14043 (Fixed with Hotfix): Die --> No need separate label for Imported Manufacturer checkbox. While placing the cursor in checkbox, the system should display the tooltip as Imported Manufacturer
- 03:34 PM Bug #14047 (Fixed with Hotfix): Equipment Part Linkage: Not able to map the parts for the selected assembly line.
- 03:31 PM Bug #14140 (Fixed with Hotfix): PM Supervisor calendar: The selected activity is not getting displayed in the planned maintenance Activity field
- 03:29 PM Bug #14145 (Fixed with Hotfix): Equipment: without entering the text value in Asset Number and tries to save the Equipment master details, it should display the alert message
- 01:06 PM Bug #14283 (Fixed with Hotfix): Equipment: Asset Number--> When entering more than 10 characters and saving the details, the system getting hanged and also alert message is not displayed
- 01:04 PM Bug #14295 (Fixed with Hotfix): Equipment: Asset Number field--> It should not accept the same asset number for different equipment
- 01:01 PM Bug #14347 (Fixed with Hotfix): Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the classification of the die
- 01:01 PM Bug #14349 (Fixed with Hotfix): Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert message is not displayed and also not redirecting to the die master screen
- 12:45 PM Unit Level and Cosmetic Issues #14377 (Fixed with Hotfix): Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- 12:40 PM Bug #14378 (Fixed with Hotfix): Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- 12:40 PM Bug #14386 (Fixed with Hotfix): Business Rule: Reminder setting tab--> The system should not display the duration value "Zero" as default
- 10:25 AM Bug #14108 (Closed): Design VDA - Structure Analysis - Pagination is not working while Expand/Collapse from Double click and Arrow
- Closed in SP915 Cycle 5
- 10:23 AM Bug #14195: Design VDA - Structure Analysis - Pagination for the Diagram increases even when collapsing the Elements. (Refer Desciption)
- Closed in SP915 Cycle 5
- 10:23 AM Bug #14195 (Closed): Design VDA - Structure Analysis - Pagination for the Diagram increases even when collapsing the Elements. (Refer Desciption)
11/04/2019
- 05:44 PM Bug #14798 (Open): Perform audit->if audit status is NO NC then during submit to auditee,checklists details section showing Rejected status in bottom as no NC and No conditional points
- 05:44 PM Bug #14797 (Open): Perform audit screen->No Repeat audit is generated with respect to the start date and end date
- 05:44 PM Bug #14795 (Open): Perform audit->VAM score status (approved/conditionally approved/rejected) is wrong against with Score logic settings
- 05:44 PM Bug #14794 (Open): Checklists->if any score has set as N/A,then during fill checklists if score for N/A is selected then unable to submit the checklists "Please fill chcekpoint" alert is getting displayed,Green tick also not applier if N/A value is selected
- 01:05 PM Bug #14636 (Resolved): VEM audit-Daily->Duplicate audit generated for routine audit
11/01/2019
- 05:37 PM Bug #14811 (Closed): Inspection Sheet : Unable to Accept/Reject the lot.Shows popup "Please select Approver" even though approver is selected
- Inspection Sheet : Unable to Accept/Reject the lot.Shows popup "Please select Approver" even though approver is selected
- 05:15 PM Bug #14808 (Closed): Inprocess Inspection : Data is not displaying in Inspection sheet if Multi-Operations are enabled in IC settings
- Inprocess Inspection : Data is not displaying in Inspection sheet if Multi-Operations are enabled in IC settings
- 03:01 PM Bug #14745 (Resolved): Supplier Management: Automatic VQI rights function->Issue 1: Unable to do perform audit as no options available as "Perform audit" menu, Issue 2: Through actions it shows server error
- 03:00 PM Bug #14589 (Resolved): Deleting checklists have checkpoint cause server error
- 03:00 PM Bug #14590 (Resolved): Assigning score for a parent checklists not applied to its checkpoint(child's)
- 01:10 PM Bug #14798 (Resolved): Perform audit->if audit status is NO NC then during submit to auditee,checklists details section showing Rejected status in bottom as no NC and No conditional points
- Perform audit->if audit status is NO NC then during submit to auditee,checklists details section showing Rejected sta...
- 01:02 PM Bug #14797 (Fixed with Hotfix): Perform audit screen->No Repeat audit is generated with respect to the start date and end date
- Perform audit screen->No Repeat audit is generated with respect to the start date and end date
- 12:56 PM Bug #14796 (Open): NXP->Cummins Report:Auditor & Auditee contact person name are displayed incorrect in cummins Report
- NXP->Cummins Report:Map entity is mapped with multiple contact person but system is displaying 1 users while publishi...
- 12:53 PM Bug #14795 (Resolved): Perform audit->VAM score status (approved/conditionally approved/rejected) is wrong against with Score logic settings
- Perform audit->VAM score status (approved/conditionally approved/rejected) is wrong against with Score logic settings
- 12:40 PM Bug #14794 (Resolved): Checklists->if any score has set as N/A,then during fill checklists if score for N/A is selected then unable to submit the checklists "Please fill chcekpoint" alert is getting displayed,Green tick also not applier if N/A value is selected
- Checklists->if any score has set as N/A,then during fill checklists if score for N/A is selected then unable to submi...
10/31/2019
- 06:45 PM Bug #14769 (Closed): Final Inspection :Unable to select multiple operations in Inspection Entry Pop-up even though multi-operation is enabled is IC settings
- Final Inspection :Unable to select multiple operations in Inspection Entry Pop-up even though multi-operation is enab...
- 06:21 PM Bug #14768 (Closed): Gage Information : Few of the details are not displaying
- Gage Information : Few of the details are not displaying
- 06:09 PM Bug #14700 (Fixed with Hotfix): Inspection sheet : Getting server error on clicking on Gage hyperlink
- 05:49 PM Bug #14700 (Open): Inspection sheet : Getting server error on clicking on Gage hyperlink
- 05:53 PM Bug #14607 (Resolved): Unable to do VAM audit as no checklists details are showing for VAM checklisst(selected Class A template)
- 05:49 PM Bug #14759 (Open): Inspection Sheet : No validation available on clicking Submit button
- 04:47 PM Bug #14759 (Closed): Inspection Sheet : No validation available on clicking Submit button
- Inspection Sheet : No validation available on clicking Submit button
System allows to submit the Inspection sheet ... - 05:49 PM Bug #14758 (Open): Inspection Sheet : Approver details not getting saved
- 04:42 PM Bug #14758 (Closed): Inspection Sheet : Approver details not getting saved
- Inspection Sheet : Approver details not getting saved
- 05:49 PM Bug #14757 (Open): Final Inspection Scheduling : Unable to schedule the same part number for multiple dates
- 04:39 PM Bug #14757 (Closed): Final Inspection Scheduling : Unable to schedule the same part number for multiple dates
- Final Inspection Scheduling : Unable to schedule the same part number for multiple dates
- 05:49 PM Bug #14755 (Open): Receiving Inspection Scheduling : Completed items are not displaying on search
- 03:56 PM Bug #14755 (Closed): Receiving Inspection Scheduling : Completed items are not displaying on search
- Receiving Inspection Scheduling : Completed items are not displaying on search
- 05:49 PM Bug #14753 (Open): Getting server error pop-up on clicking on Characteristics or Gage Hyperlink in Inspection sheet
- 03:39 PM Bug #14753 (Closed): Getting server error pop-up on clicking on Characteristics or Gage Hyperlink in Inspection sheet
- Getting server error pop-up on clicking on Characteristics or Gage Hyperlink in Inspection sheet
- 05:49 PM Bug #14752 (Open): Production OEE: Losses list displays as twice in overall shift tab
- 03:37 PM Bug #14752 (Closed): Production OEE: Losses list displays as twice in overall shift tab
- Production OEE: Losses list displays as twice in overall shift tab
- 05:49 PM Bug #14745 (Open): Supplier Management: Automatic VQI rights function->Issue 1: Unable to do perform audit as no options available as "Perform audit" menu, Issue 2: Through actions it shows server error
- 02:52 PM Bug #14745 (Fixed with Hotfix): Supplier Management: Automatic VQI rights function->Issue 1: Unable to do perform audit as no options available as "Perform audit" menu, Issue 2: Through actions it shows server error
- Supplier Management: Automatic VQI rights function->Issue 1: Unable to do perform audit as no options available as "P...
- 05:49 PM Bug #14740 (Open): PM Calendar: Team--> Activity detail is not showing in the maintenance calendar
- 02:38 PM Bug #14740 (Closed): PM Calendar: Team--> Activity detail is not showing in the maintenance calendar
- PM Calendar: Team--> Activity detail is not showing in the maintenance calendar
- 05:49 PM Bug #14733 (Open): PM Supervisor calendar: The mapped spare part for the activity is not showing in the Planned maintenance listing screen
- 01:10 PM Bug #14733 (Closed): PM Supervisor calendar: The mapped spare part for the activity is not showing in the Planned maintenance listing screen
- *Issue 1:* PM Supervisor calendar: The mapped spare part for the activity is not showing in the Planned maintenance l...
- 05:49 PM Bug #14730 (Open): PM Supervisor calendar(Maintenance Team)--> In activity user field, without showing the assigned person details, it displays the logged in person detail in user drop down field
- 12:31 PM Bug #14730 (Closed): PM Supervisor calendar(Maintenance Team)--> In activity user field, without showing the assigned person details, it displays the logged in person detail in user drop down field
- *Issue 1:* PM--> When clicking on user drop down field, it displays the user of logged in person. The system should d...
- 05:49 PM Bug #14725 (Open): No validation alert in part adding screen if supplier type(new vendor....) has no part type created.
- 12:03 PM Bug #14725 (Resolved): No validation alert in part adding screen if supplier type(new vendor....) has no part type created.
- No validation alert in part adding screen if supplier type(new vendor....) has no part type created.
- 05:49 PM Bug #14718 (Open): Unable to add part in supplier creation page.No add button available automatically in part section,once Supplier is selected as fully qualified.
- 11:35 AM Bug #14718 (Resolved): Unable to add part in supplier creation page.No add button available automatically in part section,once Supplier is selected as fully qualified.
- Unable to add part in supplier creation page.No add button available automatically in part section,once Supplier is s...
- 05:49 PM Bug #14711 (Open): Inprocess Inspection : Inspection sheet is not opening
- 05:49 PM Bug #14707 (Open): Inspection Parameters:Defect phenomenon should be replaced with Defect
- 05:49 PM Bug #14706 (Open): Production items are not loading in Search Inspection Entry
- 05:49 PM Bug #14703 (Open): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 03:30 PM Bug #14679 (Fixed with Hotfix): Inspection form std : Unable to delete multiple records
- 03:29 PM Bug #14682 (Fixed with Hotfix): Inspection form std : Search by Notification interval is not working
- 03:27 PM Bug #14683 (Fixed with Hotfix): Inspection Parameters->Characteristics Grid->Search by Defect Phenomenon not working
- 03:26 PM Bug #14684 (Fixed with Hotfix): Defect : Search by Defect spec is not working
- 02:23 PM Bug #14666 (Fixed with Hotfix): Inspection Sheet : Error pop-up displaying on clicking save button
- 02:23 PM Bug #14616 (Fixed with Hotfix): Part Equipment Mapping : Page is not Opening
- 02:22 PM Bug #14588 (Fixed with Hotfix): Defect : DefectSpec Label Issue
- 12:07 PM Bug #14605 (Resolved): Supplier template selection in Supplier creation screen should reflect in part listing page and schedule audit page and engagement screen for change
- 11:10 AM Bug #14595 (Resolved): Unable to select/edit supplier template during update scheduled audit.No drop down is available
10/30/2019
- 06:01 PM Bug #14711 (Closed): Inprocess Inspection : Inspection sheet is not opening
- Inprocess Inspection : Inspection sheet is not opening
- 05:51 PM Bug #14707 (Closed): Inspection Parameters:Defect phenomenon should be replaced with Defect
- Inspection Parameters:Defect phenomenon should be replaced with Defect
- 05:43 PM Bug #14706 (Closed): Production items are not loading in Search Inspection Entry
- Production items are not loading in Search Inspection Entry
- 05:38 PM Bug #14703 (Closed): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 05:31 PM Bug #14664 (Fixed with Hotfix): Inspection sheet is not opening on clicking submit button in Inspection Entry pop-up
- 05:18 PM Bug #14664 (Open): Inspection sheet is not opening on clicking submit button in Inspection Entry pop-up
- 05:31 PM Bug #14614 (Fixed with Hotfix): Inspection form std : Data not getting saved on clicking on save button
- 05:18 PM Bug #14614 (Open): Inspection form std : Data not getting saved on clicking on save button
- 05:31 PM Bug #14613 (Fixed with Hotfix): Inspection Form Std : Sample frequency is not listing in the drop down
- 05:18 PM Bug #14613 (Open): Inspection Form Std : Sample frequency is not listing in the drop down
- 05:29 PM Bug #14700 (Closed): Inspection sheet : Getting server error on clicking on Gage hyperlink
- Inspection sheet : Getting server error on clicking on Gage hyperlink
- 05:18 PM Bug #14639 (Open): VEM-Corrective action close out->Data not saved error alert is getting displayed on clicking save for verified and validated
- 05:18 PM Bug #14208 (Open): Clicking on the FMEA link in analysis form, shows "Object Reference not set" error message
- 05:18 PM Unit Level and Cosmetic Issues #14188 (Open): Sprint 4 : Auditor log - Text need to change Audit plan and space is needed between add and delete button ( Above and below)
- 05:18 PM Unit Level and Cosmetic Issues #14187 (Open): Default three rows need to add in Audit plan page
- 05:18 PM Bug #14172 (Open): Design and Process VDA - After refreshing the page, colour for Risk and Optimization changes to Red even for High values
- 05:18 PM Bug #14684 (Open): Defect : Search by Defect spec is not working
- 03:05 PM Bug #14684 (Closed): Defect : Search by Defect spec is not working
- Defect : Search by Defect spec is not working
- 05:18 PM Bug #14683 (Open): Inspection Parameters->Characteristics Grid->Search by Defect Phenomenon not working
- 03:00 PM Bug #14683 (Closed): Inspection Parameters->Characteristics Grid->Search by Defect Phenomenon not working
- Inspection Parameters->Characteristics Grid->Search by Defect Phenomenon not working
- 05:18 PM Bug #14682 (Open): Inspection form std : Search by Notification interval is not working
- 02:53 PM Bug #14682 (Closed): Inspection form std : Search by Notification interval is not working
- Inspection form std : Search by Notification interval is not working
- 05:18 PM Bug #14679 (Open): Inspection form std : Unable to delete multiple records
- 02:50 PM Bug #14679 (Closed): Inspection form std : Unable to delete multiple records
- Inspection form std : Unable to delete multiple records
- 05:18 PM Bug #14666 (Open): Inspection Sheet : Error pop-up displaying on clicking save button
- 05:18 PM Suggestion #14656 (Open): Need Import and export option for Non manufacturing line and utility equipment in Equipment type and Equipment creation screen
- 05:18 PM Unit Level and Cosmetic Issues #14654 (Open): Equipment Element --> Sorting is not working as expected
- 05:18 PM Bug #14652 (Open): Utility Equipment: Utility Equipment: while creating the utility equipment, entered equipment details of Vendor, manufacturer, criticality, commission date and production date is not getting saved
- 05:18 PM Unit Level and Cosmetic Issues #14648 (Open): Breakdown Request: Need option to enter more than 255 characters in breakdown description
- 05:18 PM Bug #14616 (Open): Part Equipment Mapping : Page is not Opening
- 05:18 PM Bug #14610 (Open): PM Calendar: The assigned WO is not showing in Weekly view.
- 05:18 PM Bug #14598 (Open): PM Supervisor calendar(Weekly view): Rescheduled WO is not showing in weekly view, but displays in monthly view
- 05:18 PM Bug #14593 (Open): Acceptance Quality Limit : By default not displaying any data,user need to select the Inspection Mode for viewing data
- 05:18 PM Bug #14588 (Open): Defect : DefectSpec Label Issue
- 05:18 PM Bug #14580 (Open): PM Supervisor Calendar: PM Supervisor calendar and PM Calendar: The Scheduled, assigned, completed and completed with deadline violate status is not showing in the Planned maintenance detail work order status field as well as in tooltip work order status
- 05:18 PM Bug #14577 (Open): PM Supervisor Calendar: When scheduling the WO for an Equipment, the dummy actual WO scheduled in W1(Jan) and also the WO for the Next week is not generated. Kindly refer screenshot
- 05:18 PM Bug #14549 (Open): Equipment: Without selecting the Equipment category field, the system displays alert like " Please select Equipment master". It should display the alert like "Please select Equipment category"
- 05:18 PM Bug #14546 (Open): Equipment: Status related issues(In use, Not in Use and Discard from asset)
- 05:18 PM Bug #14542 (Open): Trade: Trade menu showing twice in TPM setup tab
- 05:18 PM Bug #14478 (Open): Icon missing in LPA reports for "Audit finding classification" and "LPA finding classification"
- 05:18 PM Unit Level and Cosmetic Issues #14462 (Open): Equipment: When tries to edit the same equipment name, it displays alert like "Similar name exists do you want to continue?"if clicking on Ok button, the page should get refresh automatically
10/29/2019
- 06:04 PM Bug #14195 (Resolved): Design VDA - Structure Analysis - Pagination for the Diagram increases even when collapsing the Elements. (Refer Desciption)
- 06:03 PM Bug #14108 (Resolved): Design VDA - Structure Analysis - Pagination is not working while Expand/Collapse from Double click and Arrow
- 06:03 PM Bug #14185 (Resolved): Design VDA - While adding Failure Without Function and Requirement, system creates a Blank Function without connection with the Failure.
- 06:03 PM Bug #14115 (Resolved): Design VDA - Structure Analysis - System allows to Copy an element and Drop on another element in the Same Level. Following Issues occurs while doing the above operation.
- 05:55 PM Bug #14666 (Closed): Inspection Sheet : Error pop-up displaying on clicking save button
- Inspection Sheet : Error pop-up displaying on clicking save button
- 02:57 PM Bug #14664 (Closed): Inspection sheet is not opening on clicking submit button in Inspection Entry pop-up
- Inspection sheet is not opening on clicking submit button in Inspection Entry pop-up
- 02:25 PM Bug #14637 (Open): VEM->No CAR forms loading properly during corrective action
- 02:25 PM Bug #14636 (Open): VEM audit-Daily->Duplicate audit generated for routine audit
- 12:40 PM Suggestion #14656 (Open): Need Import and export option for Non manufacturing line and utility equipment in Equipment type and Equipment creation screen
- 1. Need Import and export option for Non manufacturing line and utility equipment in Equipment type and Equipment cre...
- 12:36 PM Unit Level and Cosmetic Issues #14654 (Closed): Equipment Element --> Sorting is not working as expected
- *Issue 1:* Equipment--> Equipment Element--> Element and Element description --> Sorting is not working as expected ...
- 12:12 PM Bug #14652 (Closed): Utility Equipment: Utility Equipment: while creating the utility equipment, entered equipment details of Vendor, manufacturer, criticality, commission date and production date is not getting saved
- Utility Equipment: while creating the utility equipment, entered equipment details of Vendor, manufacturer, criticali...
- 11:42 AM Unit Level and Cosmetic Issues #14648 (Closed): Breakdown Request: Need option to enter more than 255 characters in breakdown description
- *Issue 1:* Breakdown Request: Need option to enter more than 255 characters in breakdown description
*Issue 2:* La...
Also available in: Atom