Activity
From 10/04/2019 to 11/02/2019
11/01/2019
- 05:37 PM Bug #14811 (Closed): Inspection Sheet : Unable to Accept/Reject the lot.Shows popup "Please select Approver" even though approver is selected
- Inspection Sheet : Unable to Accept/Reject the lot.Shows popup "Please select Approver" even though approver is selected
- 05:15 PM Bug #14808 (Closed): Inprocess Inspection : Data is not displaying in Inspection sheet if Multi-Operations are enabled in IC settings
- Inprocess Inspection : Data is not displaying in Inspection sheet if Multi-Operations are enabled in IC settings
- 03:01 PM Bug #14745 (Resolved): Supplier Management: Automatic VQI rights function->Issue 1: Unable to do perform audit as no options available as "Perform audit" menu, Issue 2: Through actions it shows server error
- 03:00 PM Bug #14589 (Resolved): Deleting checklists have checkpoint cause server error
- 03:00 PM Bug #14590 (Resolved): Assigning score for a parent checklists not applied to its checkpoint(child's)
- 01:10 PM Bug #14798 (Resolved): Perform audit->if audit status is NO NC then during submit to auditee,checklists details section showing Rejected status in bottom as no NC and No conditional points
- Perform audit->if audit status is NO NC then during submit to auditee,checklists details section showing Rejected sta...
- 01:02 PM Bug #14797 (Fixed with Hotfix): Perform audit screen->No Repeat audit is generated with respect to the start date and end date
- Perform audit screen->No Repeat audit is generated with respect to the start date and end date
- 12:56 PM Bug #14796 (Open): NXP->Cummins Report:Auditor & Auditee contact person name are displayed incorrect in cummins Report
- NXP->Cummins Report:Map entity is mapped with multiple contact person but system is displaying 1 users while publishi...
- 12:53 PM Bug #14795 (Resolved): Perform audit->VAM score status (approved/conditionally approved/rejected) is wrong against with Score logic settings
- Perform audit->VAM score status (approved/conditionally approved/rejected) is wrong against with Score logic settings
- 12:40 PM Bug #14794 (Resolved): Checklists->if any score has set as N/A,then during fill checklists if score for N/A is selected then unable to submit the checklists "Please fill chcekpoint" alert is getting displayed,Green tick also not applier if N/A value is selected
- Checklists->if any score has set as N/A,then during fill checklists if score for N/A is selected then unable to submi...
10/31/2019
- 06:45 PM Bug #14769 (Closed): Final Inspection :Unable to select multiple operations in Inspection Entry Pop-up even though multi-operation is enabled is IC settings
- Final Inspection :Unable to select multiple operations in Inspection Entry Pop-up even though multi-operation is enab...
- 06:21 PM Bug #14768 (Closed): Gage Information : Few of the details are not displaying
- Gage Information : Few of the details are not displaying
- 06:09 PM Bug #14700 (Fixed with Hotfix): Inspection sheet : Getting server error on clicking on Gage hyperlink
- 05:49 PM Bug #14700 (Open): Inspection sheet : Getting server error on clicking on Gage hyperlink
- 05:53 PM Bug #14607 (Resolved): Unable to do VAM audit as no checklists details are showing for VAM checklisst(selected Class A template)
- 05:49 PM Bug #14759 (Open): Inspection Sheet : No validation available on clicking Submit button
- 04:47 PM Bug #14759 (Closed): Inspection Sheet : No validation available on clicking Submit button
- Inspection Sheet : No validation available on clicking Submit button
System allows to submit the Inspection sheet ... - 05:49 PM Bug #14758 (Open): Inspection Sheet : Approver details not getting saved
- 04:42 PM Bug #14758 (Closed): Inspection Sheet : Approver details not getting saved
- Inspection Sheet : Approver details not getting saved
- 05:49 PM Bug #14757 (Open): Final Inspection Scheduling : Unable to schedule the same part number for multiple dates
- 04:39 PM Bug #14757 (Closed): Final Inspection Scheduling : Unable to schedule the same part number for multiple dates
- Final Inspection Scheduling : Unable to schedule the same part number for multiple dates
- 05:49 PM Bug #14755 (Open): Receiving Inspection Scheduling : Completed items are not displaying on search
- 03:56 PM Bug #14755 (Closed): Receiving Inspection Scheduling : Completed items are not displaying on search
- Receiving Inspection Scheduling : Completed items are not displaying on search
- 05:49 PM Bug #14753 (Open): Getting server error pop-up on clicking on Characteristics or Gage Hyperlink in Inspection sheet
- 03:39 PM Bug #14753 (Closed): Getting server error pop-up on clicking on Characteristics or Gage Hyperlink in Inspection sheet
- Getting server error pop-up on clicking on Characteristics or Gage Hyperlink in Inspection sheet
- 05:49 PM Bug #14752 (Open): Production OEE: Losses list displays as twice in overall shift tab
- 03:37 PM Bug #14752 (Closed): Production OEE: Losses list displays as twice in overall shift tab
- Production OEE: Losses list displays as twice in overall shift tab
- 05:49 PM Bug #14745 (Open): Supplier Management: Automatic VQI rights function->Issue 1: Unable to do perform audit as no options available as "Perform audit" menu, Issue 2: Through actions it shows server error
- 02:52 PM Bug #14745 (Fixed with Hotfix): Supplier Management: Automatic VQI rights function->Issue 1: Unable to do perform audit as no options available as "Perform audit" menu, Issue 2: Through actions it shows server error
- Supplier Management: Automatic VQI rights function->Issue 1: Unable to do perform audit as no options available as "P...
- 05:49 PM Bug #14740 (Open): PM Calendar: Team--> Activity detail is not showing in the maintenance calendar
- 02:38 PM Bug #14740 (Closed): PM Calendar: Team--> Activity detail is not showing in the maintenance calendar
- PM Calendar: Team--> Activity detail is not showing in the maintenance calendar
- 05:49 PM Bug #14733 (Open): PM Supervisor calendar: The mapped spare part for the activity is not showing in the Planned maintenance listing screen
- 01:10 PM Bug #14733 (Closed): PM Supervisor calendar: The mapped spare part for the activity is not showing in the Planned maintenance listing screen
- *Issue 1:* PM Supervisor calendar: The mapped spare part for the activity is not showing in the Planned maintenance l...
- 05:49 PM Bug #14730 (Open): PM Supervisor calendar(Maintenance Team)--> In activity user field, without showing the assigned person details, it displays the logged in person detail in user drop down field
- 12:31 PM Bug #14730 (Closed): PM Supervisor calendar(Maintenance Team)--> In activity user field, without showing the assigned person details, it displays the logged in person detail in user drop down field
- *Issue 1:* PM--> When clicking on user drop down field, it displays the user of logged in person. The system should d...
- 05:49 PM Bug #14725 (Open): No validation alert in part adding screen if supplier type(new vendor....) has no part type created.
- 12:03 PM Bug #14725 (Resolved): No validation alert in part adding screen if supplier type(new vendor....) has no part type created.
- No validation alert in part adding screen if supplier type(new vendor....) has no part type created.
- 05:49 PM Bug #14718 (Open): Unable to add part in supplier creation page.No add button available automatically in part section,once Supplier is selected as fully qualified.
- 11:35 AM Bug #14718 (Resolved): Unable to add part in supplier creation page.No add button available automatically in part section,once Supplier is selected as fully qualified.
- Unable to add part in supplier creation page.No add button available automatically in part section,once Supplier is s...
- 05:49 PM Bug #14711 (Open): Inprocess Inspection : Inspection sheet is not opening
- 05:49 PM Bug #14707 (Open): Inspection Parameters:Defect phenomenon should be replaced with Defect
- 05:49 PM Bug #14706 (Open): Production items are not loading in Search Inspection Entry
- 05:49 PM Bug #14703 (Open): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 03:30 PM Bug #14679 (Fixed with Hotfix): Inspection form std : Unable to delete multiple records
- 03:29 PM Bug #14682 (Fixed with Hotfix): Inspection form std : Search by Notification interval is not working
- 03:27 PM Bug #14683 (Fixed with Hotfix): Inspection Parameters->Characteristics Grid->Search by Defect Phenomenon not working
- 03:26 PM Bug #14684 (Fixed with Hotfix): Defect : Search by Defect spec is not working
- 02:23 PM Bug #14666 (Fixed with Hotfix): Inspection Sheet : Error pop-up displaying on clicking save button
- 02:23 PM Bug #14616 (Fixed with Hotfix): Part Equipment Mapping : Page is not Opening
- 02:22 PM Bug #14588 (Fixed with Hotfix): Defect : DefectSpec Label Issue
- 12:07 PM Bug #14605 (Resolved): Supplier template selection in Supplier creation screen should reflect in part listing page and schedule audit page and engagement screen for change
- 11:10 AM Bug #14595 (Resolved): Unable to select/edit supplier template during update scheduled audit.No drop down is available
10/30/2019
- 06:01 PM Bug #14711 (Closed): Inprocess Inspection : Inspection sheet is not opening
- Inprocess Inspection : Inspection sheet is not opening
- 05:51 PM Bug #14707 (Closed): Inspection Parameters:Defect phenomenon should be replaced with Defect
- Inspection Parameters:Defect phenomenon should be replaced with Defect
- 05:43 PM Bug #14706 (Closed): Production items are not loading in Search Inspection Entry
- Production items are not loading in Search Inspection Entry
- 05:38 PM Bug #14703 (Closed): Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- Inspection Sheet ->Value Entry Pop-up->Save option showing multiple times
- 05:31 PM Bug #14664 (Fixed with Hotfix): Inspection sheet is not opening on clicking submit button in Inspection Entry pop-up
- 05:18 PM Bug #14664 (Open): Inspection sheet is not opening on clicking submit button in Inspection Entry pop-up
- 05:31 PM Bug #14614 (Fixed with Hotfix): Inspection form std : Data not getting saved on clicking on save button
- 05:18 PM Bug #14614 (Open): Inspection form std : Data not getting saved on clicking on save button
- 05:31 PM Bug #14613 (Fixed with Hotfix): Inspection Form Std : Sample frequency is not listing in the drop down
- 05:18 PM Bug #14613 (Open): Inspection Form Std : Sample frequency is not listing in the drop down
- 05:29 PM Bug #14700 (Closed): Inspection sheet : Getting server error on clicking on Gage hyperlink
- Inspection sheet : Getting server error on clicking on Gage hyperlink
- 05:18 PM Bug #14639 (Open): VEM-Corrective action close out->Data not saved error alert is getting displayed on clicking save for verified and validated
- 05:18 PM Bug #14208 (Open): Clicking on the FMEA link in analysis form, shows "Object Reference not set" error message
- 05:18 PM Unit Level and Cosmetic Issues #14188 (Open): Sprint 4 : Auditor log - Text need to change Audit plan and space is needed between add and delete button ( Above and below)
- 05:18 PM Unit Level and Cosmetic Issues #14187 (Open): Default three rows need to add in Audit plan page
- 05:18 PM Bug #14172 (Open): Design and Process VDA - After refreshing the page, colour for Risk and Optimization changes to Red even for High values
- 05:18 PM Bug #14684 (Open): Defect : Search by Defect spec is not working
- 03:05 PM Bug #14684 (Closed): Defect : Search by Defect spec is not working
- Defect : Search by Defect spec is not working
- 05:18 PM Bug #14683 (Open): Inspection Parameters->Characteristics Grid->Search by Defect Phenomenon not working
- 03:00 PM Bug #14683 (Closed): Inspection Parameters->Characteristics Grid->Search by Defect Phenomenon not working
- Inspection Parameters->Characteristics Grid->Search by Defect Phenomenon not working
- 05:18 PM Bug #14682 (Open): Inspection form std : Search by Notification interval is not working
- 02:53 PM Bug #14682 (Closed): Inspection form std : Search by Notification interval is not working
- Inspection form std : Search by Notification interval is not working
- 05:18 PM Bug #14679 (Open): Inspection form std : Unable to delete multiple records
- 02:50 PM Bug #14679 (Closed): Inspection form std : Unable to delete multiple records
- Inspection form std : Unable to delete multiple records
- 05:18 PM Bug #14666 (Open): Inspection Sheet : Error pop-up displaying on clicking save button
- 05:18 PM Suggestion #14656 (Open): Need Import and export option for Non manufacturing line and utility equipment in Equipment type and Equipment creation screen
- 05:18 PM Unit Level and Cosmetic Issues #14654 (Open): Equipment Element --> Sorting is not working as expected
- 05:18 PM Bug #14652 (Open): Utility Equipment: Utility Equipment: while creating the utility equipment, entered equipment details of Vendor, manufacturer, criticality, commission date and production date is not getting saved
- 05:18 PM Unit Level and Cosmetic Issues #14648 (Open): Breakdown Request: Need option to enter more than 255 characters in breakdown description
- 05:18 PM Bug #14616 (Open): Part Equipment Mapping : Page is not Opening
- 05:18 PM Bug #14610 (Open): PM Calendar: The assigned WO is not showing in Weekly view.
- 05:18 PM Bug #14598 (Open): PM Supervisor calendar(Weekly view): Rescheduled WO is not showing in weekly view, but displays in monthly view
- 05:18 PM Bug #14593 (Open): Acceptance Quality Limit : By default not displaying any data,user need to select the Inspection Mode for viewing data
- 05:18 PM Bug #14588 (Open): Defect : DefectSpec Label Issue
- 05:18 PM Bug #14580 (Open): PM Supervisor Calendar: PM Supervisor calendar and PM Calendar: The Scheduled, assigned, completed and completed with deadline violate status is not showing in the Planned maintenance detail work order status field as well as in tooltip work order status
- 05:18 PM Bug #14577 (Open): PM Supervisor Calendar: When scheduling the WO for an Equipment, the dummy actual WO scheduled in W1(Jan) and also the WO for the Next week is not generated. Kindly refer screenshot
- 05:18 PM Bug #14549 (Open): Equipment: Without selecting the Equipment category field, the system displays alert like " Please select Equipment master". It should display the alert like "Please select Equipment category"
- 05:18 PM Bug #14546 (Open): Equipment: Status related issues(In use, Not in Use and Discard from asset)
- 05:18 PM Bug #14542 (Open): Trade: Trade menu showing twice in TPM setup tab
- 05:18 PM Bug #14478 (Open): Icon missing in LPA reports for "Audit finding classification" and "LPA finding classification"
- 05:18 PM Unit Level and Cosmetic Issues #14462 (Open): Equipment: When tries to edit the same equipment name, it displays alert like "Similar name exists do you want to continue?"if clicking on Ok button, the page should get refresh automatically
10/29/2019
- 06:04 PM Bug #14195 (Resolved): Design VDA - Structure Analysis - Pagination for the Diagram increases even when collapsing the Elements. (Refer Desciption)
- 06:03 PM Bug #14108 (Resolved): Design VDA - Structure Analysis - Pagination is not working while Expand/Collapse from Double click and Arrow
- 06:03 PM Bug #14185 (Resolved): Design VDA - While adding Failure Without Function and Requirement, system creates a Blank Function without connection with the Failure.
- 06:03 PM Bug #14115 (Resolved): Design VDA - Structure Analysis - System allows to Copy an element and Drop on another element in the Same Level. Following Issues occurs while doing the above operation.
- 05:55 PM Bug #14666 (Closed): Inspection Sheet : Error pop-up displaying on clicking save button
- Inspection Sheet : Error pop-up displaying on clicking save button
- 02:57 PM Bug #14664 (Closed): Inspection sheet is not opening on clicking submit button in Inspection Entry pop-up
- Inspection sheet is not opening on clicking submit button in Inspection Entry pop-up
- 02:25 PM Bug #14637 (Open): VEM->No CAR forms loading properly during corrective action
- 02:25 PM Bug #14636 (Open): VEM audit-Daily->Duplicate audit generated for routine audit
- 12:40 PM Suggestion #14656 (Open): Need Import and export option for Non manufacturing line and utility equipment in Equipment type and Equipment creation screen
- 1. Need Import and export option for Non manufacturing line and utility equipment in Equipment type and Equipment cre...
- 12:36 PM Unit Level and Cosmetic Issues #14654 (Closed): Equipment Element --> Sorting is not working as expected
- *Issue 1:* Equipment--> Equipment Element--> Element and Element description --> Sorting is not working as expected ...
- 12:12 PM Bug #14652 (Closed): Utility Equipment: Utility Equipment: while creating the utility equipment, entered equipment details of Vendor, manufacturer, criticality, commission date and production date is not getting saved
- Utility Equipment: while creating the utility equipment, entered equipment details of Vendor, manufacturer, criticali...
- 11:42 AM Unit Level and Cosmetic Issues #14648 (Closed): Breakdown Request: Need option to enter more than 255 characters in breakdown description
- *Issue 1:* Breakdown Request: Need option to enter more than 255 characters in breakdown description
*Issue 2:* La...
10/25/2019
- 03:39 PM Bug #14606 (Fixed with Hotfix): Unable to do VEM audit schedule.
- 03:38 PM Bug #14606: Unable to do VEM audit schedule.
- Working fine.able to schedule VEM audit
- 01:03 PM Bug #14606 (Resolved): Unable to do VEM audit schedule.
- 03:34 PM Bug #14639 (Open): VEM-Corrective action close out->Data not saved error alert is getting displayed on clicking save for verified and validated
- VEM-Corrective action close out->Data not saved error alert is getting displayed on clicking save for verified and va...
- 03:16 PM Bug #14637 (Resolved): VEM->No CAR forms loading properly during corrective action
- VEM->No CAR forms loading properly during corrective action
- 03:05 PM Bug #14636 (Fixed with Hotfix): VEM audit-Daily->Duplicate audit generated for routine audit
- VEM audit-Daily->Duplicate audit generated for routine audit
- 02:55 PM Bug #14604 (Fixed with Hotfix): VEM-Engagement model screen->Location listing all the parts address instead it should list only parts needed VEM and only display the parts VAM audit completed and mapped with audit program for VEM
- Working fine
- 02:54 PM Bug #14601 (Fixed with Hotfix): Part type other than FG and RM nothing is listing in part listing page/pls refer screen shot
- Working fine
- 02:53 PM Bug #14594 (Fixed with Hotfix): Server error on clicking new button in score settings page
- Working fine
- 01:04 PM Bug #14594 (Resolved): Server error on clicking new button in score settings page
- 02:44 PM Bug #14599 (Fixed with Hotfix): Unable to do copy location in part selection screen
- Working fine
- 02:42 PM Bug #14586 (Fixed with Hotfix): There is no delete option in supplier type master screen.refer screen shot
- Working fine
- 02:40 PM Bug #14488 (Fixed with Hotfix): Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- working fine
10/24/2019
- 07:29 PM Bug #14488 (Resolved): Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- 03:33 PM Bug #14488 (Not Resolved): Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- Description duplication alone handled.Value still have duplicate issue.I can create different description with same l...
- 07:29 PM Bug #14599 (Resolved): Unable to do copy location in part selection screen
- 04:23 PM Bug #14599 (Open): Unable to do copy location in part selection screen
- 02:59 PM Bug #14599 (Fixed with Hotfix): Unable to do copy location in part selection screen
- Unable to do copy location in part selection screen
- 07:13 PM Bug #14586 (Resolved): There is no delete option in supplier type master screen.refer screen shot
- 04:23 PM Bug #14586 (Open): There is no delete option in supplier type master screen.refer screen shot
- 02:15 PM Bug #14586 (Fixed with Hotfix): There is no delete option in supplier type master screen.refer screen shot
- There is no delete option in supplier type master screen
- 07:13 PM Bug #14601 (Resolved): Part type other than FG and RM nothing is listing in part listing page/pls refer screen shot
- 04:23 PM Bug #14601 (Open): Part type other than FG and RM nothing is listing in part listing page/pls refer screen shot
- 03:03 PM Bug #14601 (Fixed with Hotfix): Part type other than FG and RM nothing is listing in part listing page/pls refer screen shot
- Part type other than FG and RM nothing is listing in part listing page/pls refer screen shot
- 07:13 PM Bug #14604 (Resolved): VEM-Engagement model screen->Location listing all the parts address instead it should list only parts needed VEM and only display the parts VAM audit completed and mapped with audit program for VEM
- 04:23 PM Bug #14604 (Open): VEM-Engagement model screen->Location listing all the parts address instead it should list only parts needed VEM and only display the parts VAM audit completed and mapped with audit program for VEM
- 03:10 PM Bug #14604 (Fixed with Hotfix): VEM-Engagement model screen->Location listing all the parts address instead it should list only parts needed VEM and only display the parts VAM audit completed and mapped with audit program for VEM
- VEM-Engagement model screen->Location listing all the parts address instead it should list only parts needed VEM and ...
- 04:58 PM Bug #13868 (Resolved): Supplier -> Import Format -> Import format excel sheet should display only format. Its should not show any data on any field and sheet
- 04:43 PM Bug #14616 (Closed): Part Equipment Mapping : Page is not Opening
- Part Equipment Mapping : Page is not Opening
- 04:35 PM Bug #14614 (Closed): Inspection form std : Data not getting saved on clicking on save button
- Inspection form std : Data not getting saved on clicking on save button
- 04:31 PM Bug #14613 (Closed): Inspection Form Std : Sample frequency is not listing in the drop down
- Inspection Form Std : Sample frequency is not listing in the drop down
- 04:23 PM Bug #14606 (Open): Unable to do VEM audit schedule.
- 03:22 PM Bug #14606 (Fixed with Hotfix): Unable to do VEM audit schedule.
- Unable to do VEM audit schedule.
- 04:23 PM Bug #14605 (Open): Supplier template selection in Supplier creation screen should reflect in part listing page and schedule audit page and engagement screen for change
- 03:15 PM Bug #14605 (Fixed with Hotfix): Supplier template selection in Supplier creation screen should reflect in part listing page and schedule audit page and engagement screen for change
- Supplier template selection in Supplier creation screen should reflect in part listing page and schedule audit page a...
- 04:23 PM Bug #14602 (Open): Where can i see the reason entered in reason text box while checking risk level option (fully qualified/conditionlay qualified/not qualified)
- 03:05 PM Bug #14602 (Resolved): Where can i see the reason entered in reason text box while checking risk level option (fully qualified/conditionlay qualified/not qualified)
- Where can i see the reason entered in reson text box while checking risk level option (fully qualified/conditionlay q...
- 04:23 PM Bug #14597 (Open): Why Risk level has drop down selection as well as multiple option checkbox? it is contadictory
- 02:53 PM Bug #14597 (Resolved): Why Risk level has drop down selection as well as multiple option checkbox? it is contadictory
- Why Risk level has drop down selection as well as multiple option checkbox? it is contadictory
- 04:23 PM Bug #14595 (Open): Unable to select/edit supplier template during update scheduled audit.No drop down is available
- 02:47 PM Bug #14595 (Fixed with Hotfix): Unable to select/edit supplier template during update scheduled audit.No drop down is available
- Unable to select/edit supplier template during update scheduled audit.No drop down is available
- 04:23 PM Bug #14594 (Open): Server error on clicking new button in score settings page
- 02:44 PM Bug #14594 (Fixed with Hotfix): Server error on clicking new button in score settings page
- Server error on clicking new button in score settings page
- 04:23 PM Bug #14590 (Open): Assigning score for a parent checklists not applied to its checkpoint(child's)
- 02:25 PM Bug #14590 (Fixed with Hotfix): Assigning score for a parent checklists not applied to its checkpoint(child's)
- Assigning score for a parent checklists not applied to its checkpoint(child's)
- 04:23 PM Bug #14589 (Open): Deleting checklists have checkpoint cause server error
- 02:23 PM Bug #14589 (Fixed with Hotfix): Deleting checklists have checkpoint cause server error
- Deleting checklists have checkpoint cause server error
- 04:22 PM Bug #14607 (Open): Unable to do VAM audit as no checklists details are showing for VAM checklisst(selected Class A template)
- Root Cause : SupplierTemplateID is not saved against the respective audit in Database
- 03:26 PM Bug #14607 (Fixed with Hotfix): Unable to do VAM audit as no checklists details are showing for VAM checklisst(selected Class A template)
- Unable to do VAM audit as no checklists details are showing for VAM checklisst(selected Class A template)
- 03:46 PM Bug #14610 (Closed): PM Calendar: The assigned WO is not showing in Weekly view.
- PM Calendar: The assigned WO is not showing in Weekly view.
• When tries to view the WO by selecting the calendar... - 03:34 PM Bug #14485 (Fixed with Hotfix): Supplier MGT:Adding supplier type in supplier type master not refelcted in part type master dropdown
- working fine
- 03:33 PM Bug #14486 (Fixed with Hotfix): Supplier MGMT:By default Plant name should display as Corporate in new risk level creation screen in risk master
- working fine
- 03:32 PM Bug #14489 (Fixed with Hotfix): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- working fine
- 02:56 PM Bug #14598 (Closed): PM Supervisor calendar(Weekly view): Rescheduled WO is not showing in weekly view, but displays in monthly view
- PM Supervisor calendar(Weekly view): Rescheduled WO is not showing in weekly view, but displays in monthly view
- 02:27 PM Bug #14593 (Closed): Acceptance Quality Limit : By default not displaying any data,user need to select the Inspection Mode for viewing data
- Acceptance Quality Limit : By default not displaying any data,user need to select the Inspection Mode for viewing data
- 02:23 PM Bug #14588 (Closed): Defect : DefectSpec Label Issue
- Defect : DefectSpec Label Issue
- 02:08 PM Bug #14490 (Fixed with Hotfix): Supplier MGMT:If "Is a site? yes" then unable to save new entity under corporate
- Working fine
- 01:28 PM Bug #14580 (Not Fixed with Hotfix): PM Supervisor Calendar: PM Supervisor calendar and PM Calendar: The Scheduled, assigned, completed and completed with deadline violate status is not showing in the Planned maintenance detail work order status field as well as in tooltip work order status
- *Issue 1:* PM Supervisor Calendar: The completed with deadline violated status showing as "completed" in planned mai...
- 12:37 PM Bug #14577 (Closed): PM Supervisor Calendar: When scheduling the WO for an Equipment, the dummy actual WO scheduled in W1(Jan) and also the WO for the Next week is not generated. Kindly refer screenshot
- Issue 1: PM Supervisor Calendar: When scheduling the WO for an Equipment, the dummy actual WO scheduled in W1(Jan) an...
- 11:03 AM Bug #14043 (Resolved): Die --> No need separate label for Imported Manufacturer checkbox. While placing the cursor in checkbox, the system should display the tooltip as Imported Manufacturer
10/23/2019
- 09:01 PM Bug #14129 (Resolved): PM Supervisor and Die PM Supervisor Calendar: The status of planned maintenance should display the status which is showing in the calendar
- 08:20 PM Bug #14140 (Resolved): PM Supervisor calendar: The selected activity is not getting displayed in the planned maintenance Activity field
- 07:43 PM Bug #14489 (Resolved): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- 05:33 PM Bug #14145 (Resolved): Equipment: without entering the text value in Asset Number and tries to save the Equipment master details, it should display the alert message
- Asset number is optional so Issue#1 not an issue.
- 05:28 PM Bug #14295 (Resolved): Equipment: Asset Number field--> It should not accept the same asset number for different equipment
- 05:01 PM Bug #14283 (Resolved): Equipment: Asset Number--> When entering more than 10 characters and saving the details, the system getting hanged and also alert message is not displayed
- 05:00 PM Bug #14386 (Resolved): Business Rule: Reminder setting tab--> The system should not display the duration value "Zero" as default
- 04:08 PM Bug #14299 (Resolved): Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected
- 03:50 PM Bug #14549 (Closed): Equipment: Without selecting the Equipment category field, the system displays alert like " Please select Equipment master". It should display the alert like "Please select Equipment category"
- Issue 1: Equipment: The system saved the Equipment detail, without entering the criticality, asset number, Commission...
- 03:28 PM Bug #14546 (Not Resolved): Equipment: Status related issues(In use, Not in Use and Discard from asset)
- Equipment: Status related issues(In use, Not in Use and Discard from asset)
Issue 1: Manufacturing Line --> When tri... - 03:01 PM Bug #14542 (Closed): Trade: Trade menu showing twice in TPM setup tab
- Trade: Trade menu showing twice in TPM setup tab
- 02:59 PM Bug #14045 (Closed): Trade --> When clicking on Trade menu, it displays blank screen with loading comment. Due to this issue not able to create the spare part master. (So imported the spare part and proceeded further)
- 02:54 PM Unit Level and Cosmetic Issues #14303 (Closed): Die: Need to change the "Please enter cycle time" alert message as "Please enter the Die Life cycle count"
- 02:54 PM Unit Level and Cosmetic Issues #14304 (Closed): Die: When entering the value as "0000" or 0000000"11111111", Need validation for Life Cycle Count as *"The value you entered is not valid"*
- 02:38 PM Bug #14503 (Closed): Plant Configuration:Category--> Utility Equipment type: Need upload option in utility Equipment creation screen
- Verified and closed this issue
- 02:28 PM Bug #14505 (Not Fixed with Hotfix): Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field, the system redirecting to the Manufacturing line and also the name of the top two fields displays as "Category"
- able to replicate in 192.168.100.47/EwQIMS site.
- 02:26 PM Bug #14043 (Not Fixed with Hotfix): Die --> No need separate label for Imported Manufacturer checkbox. While placing the cursor in checkbox, the system should display the tooltip as Imported Manufacturer
- Still it showing tooltip as import, need to change as "Imported Manufacturer"
- 02:25 PM Unit Level and Cosmetic Issues #14042 (Closed): Die --> Imported Manufacture label should be renamed to Imported Manufacturer
10/22/2019
- 07:27 PM Bug #14047 (Resolved): Equipment Part Linkage: Not able to map the parts for the selected assembly line.
- 07:12 PM Bug #14505 (Resolved): Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field, the system redirecting to the Manufacturing line and also the name of the top two fields displays as "Category"
- Issue#1 not able to replicate
Issue#2 - Not an issue. it will refresh the whole page to load activity. - 07:05 PM Bug #14505 (Open): Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field, the system redirecting to the Manufacturing line and also the name of the top two fields displays as "Category"
- 07:08 PM Bug #14503 (Resolved): Plant Configuration:Category--> Utility Equipment type: Need upload option in utility Equipment creation screen
- 07:05 PM Bug #14503 (Open): Plant Configuration:Category--> Utility Equipment type: Need upload option in utility Equipment creation screen
- 07:06 PM Bug #14283 (Open): Equipment: Asset Number--> When entering more than 10 characters and saving the details, the system getting hanged and also alert message is not displayed
- 07:05 PM Bug #14295 (Open): Equipment: Asset Number field--> It should not accept the same asset number for different equipment
- 06:53 PM Bug #14349 (Resolved): Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert message is not displayed and also not redirecting to the die master screen
- 06:34 PM Unit Level and Cosmetic Issues #14304 (Resolved): Die: When entering the value as "0000" or 0000000"11111111", Need validation for Life Cycle Count as *"The value you entered is not valid"*
- validation given "0000".
"111" its user value which cannot be validate. - 05:29 PM Bug #14347 (Resolved): Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the classification of the die
- 05:19 PM Bug #14372 (Resolved): Business Rule: Target Value settings--> Target value may be 35.6, here not able to enter the value in the field
- 03:16 PM Bug #14489 (Not Resolved): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- Check with Bijoy for UI improvement
- 11:01 AM Bug #14489 (Resolved): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- 03:00 PM Unit Level and Cosmetic Issues #14303 (Resolved): Die: Need to change the "Please enter cycle time" alert message as "Please enter the Die Life cycle count"
- 01:34 PM Bug #14378 (Resolved): Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- 01:34 PM Unit Level and Cosmetic Issues #14377 (Resolved): Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- 11:02 AM Bug #14205 (Resolved): Assign audit form and type data is shared between auditpro and supplier management
- 11:02 AM Bug #14485 (Resolved): Supplier MGT:Adding supplier type in supplier type master not refelcted in part type master dropdown
- 11:02 AM Bug #14486 (Resolved): Supplier MGMT:By default Plant name should display as Corporate in new risk level creation screen in risk master
- 11:02 AM Bug #14487 (Resolved): Supplier MGMT:Improper validation alert if not selecting plant name."Enter or select plant name" should display instead it is displaying "Enter level value" though it has specified
- 11:01 AM Bug #14488 (Resolved): Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- 11:01 AM Bug #14490 (Resolved): Supplier MGMT:If "Is a site? yes" then unable to save new entity under corporate
10/21/2019
- 12:41 PM Bug #14505 (Closed): Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field, the system redirecting to the Manufacturing line and also the name of the top two fields displays as "Category"
- Issue 1: Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field,...
- 12:21 PM Bug #14165 (Not Fixed with Hotfix): FSR - After allocating Function and Requirement in TSR for the child element and then opening FSR of child(Allocated) elements, system is displaying 'Technical Safety Concepts' as the Header
- 12:12 PM Bug #14503 (Closed): Plant Configuration:Category--> Utility Equipment type: Need upload option in utility Equipment creation screen
- Plant Configuration:Category--> Utility Equipment type: Need upload option in utility Equipment creation screen
10/19/2019
10/18/2019
- 04:10 PM Bug #14490 (Open): Supplier MGMT:If "Is a site? yes" then unable to save new entity under corporate
- 04:07 PM Bug #14490 (Fixed with Hotfix): Supplier MGMT:If "Is a site? yes" then unable to save new entity under corporate
- Supplier MGMT:If "Is a site? yes" then unable to save new entity under corporate
- 04:10 PM Bug #14489 (Open): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- 04:05 PM Bug #14489 (Fixed with Hotfix): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Impro...
- 04:10 PM Bug #14488 (Open): Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- 04:04 PM Bug #14488 (Fixed with Hotfix): Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- 04:10 PM Bug #14487 (Open): Supplier MGMT:Improper validation alert if not selecting plant name."Enter or select plant name" should display instead it is displaying "Enter level value" though it has specified
- 04:03 PM Bug #14487 (Fixed with Hotfix): Supplier MGMT:Improper validation alert if not selecting plant name."Enter or select plant name" should display instead it is displaying "Enter level value" though it has specified
- Supplier MGMT:Improper validation alert if not selecting plant name."Enter or select plant name" should display inste...
- 04:10 PM Bug #14486 (Open): Supplier MGMT:By default Plant name should display as Corporate in new risk level creation screen in risk master
- 04:01 PM Bug #14486 (Fixed with Hotfix): Supplier MGMT:By default Plant name should display as Corporate in new risk level creation screen in risk master
- Supplier MGMT:By default Plant name should display as Corporate in new risk level creation screen in risk master
- 04:10 PM Bug #14485 (Open): Supplier MGT:Adding supplier type in supplier type master not refelcted in part type master dropdown
- 04:01 PM Bug #14485 (Fixed with Hotfix): Supplier MGT:Adding supplier type in supplier type master not refelcted in part type master dropdown
- Supplier MGT:Adding supplier type in supplier type master not refelcted in part type master dropdown
- 03:03 PM Bug #14045 (Resolved): Trade --> When clicking on Trade menu, it displays blank screen with loading comment. Due to this issue not able to create the spare part master. (So imported the spare part and proceeded further)
- 03:02 PM Bug #14043 (Resolved): Die --> No need separate label for Imported Manufacturer checkbox. While placing the cursor in checkbox, the system should display the tooltip as Imported Manufacturer
- 02:59 PM Unit Level and Cosmetic Issues #14042 (Resolved): Die --> Imported Manufacture label should be renamed to Imported Manufacturer
- 02:58 PM Bug #14026 (Closed): Reports ->"NC Closure" - Report -> "Total closure count" and "Count of Open" and "Count of Closed" is not displayed the exact count
- Issue Verified in Sp_915 CY-2
- 02:34 PM Bug #14478 (Open): Icon missing in LPA reports for "Audit finding classification" and "LPA finding classification"
- Icon missing in LPA reports for "Audit finding classification" and "LPA finding classification"
- 02:31 PM Bug #14023 (Closed): Reports -> Repeat Non Conformance Report -> Label Changes in Report
- Issue verified in SP_915 Cy-2
- 12:14 PM Bug #14107 (Closed): While doing flow down from Failure tree the system throws Timeout Error
- 10:40 AM Bug #14107 (Resolved): While doing flow down from Failure tree the system throws Timeout Error
- 12:13 PM Bug #14128 (Closed): While clicking on requirement tree is not opened.
- 10:40 AM Bug #14128 (Resolved): While clicking on requirement tree is not opened.
- 10:43 AM Bug #14144 (Resolved): P-Diagram: Cannot give select option in control factors branch at control factor table
- 10:40 AM Bug #14165 (Resolved): FSR - After allocating Function and Requirement in TSR for the child element and then opening FSR of child(Allocated) elements, system is displaying 'Technical Safety Concepts' as the Header
10/17/2019
- 06:27 PM Unit Level and Cosmetic Issues #14462 (Closed): Equipment: When tries to edit the same equipment name, it displays alert like "Similar name exists do you want to continue?"if clicking on Ok button, the page should get refresh automatically
- Equipment: When tries to edit the same equipment name, it displays alert like "Similar name exists do you want to con...
- 01:48 PM Bug #13907 (Not Resolved): Removing checkpoint before submitting to auditee does not updating score status properly after corrective action close out
- Still after removing any checklists before submit to audit using edit audit record score and its status not updated a...
- 01:25 PM Bug #13807 (Closed): No view checklists details if audit status is "No NC"
- Working fine
- 01:15 PM Bug #13925 (Not Resolved): 404 File or directory not found occurred if checklists has not filled and directly submitted to auditee with "No NC" audit status
- Same 404 error error occurred if checklists has not filled and directly submitted to auditee with "No NC" audit statu...
- 01:01 PM Bug #13810 (Closed): VEM->CAR->Unable to do submit to auditee.(clicking publish no published message)
- working fine
- 01:00 PM Bug #13802 (Closed): Scheduled audit icon should remove from Suite supplier landing page.
- no schecduled audit icon in suite supplier page as expected.hence closing this defect
- 12:59 PM Bug #13801 (Closed): Primary supplier contact->Position shows 0 by default in supplier portal for supplier primary contact.This is properly shows as "User" in suite page(supplier)
- Working fine
- 12:59 PM Bug #13809 (Not Resolved): No segment 1&2,3,4 audit program by default in supplier portal.Audit program,audit type's of audit pro module should not be listing in supplier portal menu(audit program/audit type)
- Still audit program listing is not respect to supplier portal.able to see all audit program from auditpro module
- 12:57 PM Bug #13811 (Closed): Supplier import ->While importing Supplier name alone is getting imported but mapped parts from import file is not imported
- working fine.able to import supplier with parts
- 12:53 PM Bug #13951 (Closed): VEM->Perform audit screen->View previous car->On clicking show audit or Show Car's button server error is showing
- As discussed, View previous car button has removed from supplier management as there is no need of this option.hence ...
- 12:27 PM Bug #13952 (Closed): VEM->No need to show view checklists details section while submit to auditee (publish report)
- working fine
- 12:16 PM Bug #13963 (Closed): VAM perform audit->NC/OFI category displays twice(Duplicate value for NC and OFI category).Please refer screen shot
- 12:16 PM Bug #14205 (Open): Assign audit form and type data is shared between auditpro and supplier management
- 10:56 AM Bug #13895 (Closed): Reports Deployment -> Getting error message while executing a job after deploying AP report
10/16/2019
- 05:44 PM Bug #14164 (Closed): FSR - While opening FSR document for Few PI(Front Impact Airbag System/Airbag), System opens Visual Studio alert. When selecting it, Session is terminated.
- 05:43 PM Bug #13961 (Not Fixed with Hotfix): Duplicate NC is displayed in NC Details Page.
- 05:40 PM Bug #14132 (Closed): Failure Tree: Same child element is displayed for different parent in Failure tree
- 05:38 PM Bug #14135 (Closed): EFC Tree: While opening EFC tree it contains large space at bottom of the page
- 05:37 PM Bug #14136 (Closed): While clicking OK button from EFC tree flow down indicator the page got hanged
- 05:37 PM Bug #14138 (Closed): EFC Tree: When selecting EFC tree diagram the parent PI itself displaying as child for the same Element
- 05:36 PM Bug #14174 (Closed): Requirement Tree: Same child element is displayed for different parent in Requirement tree
- 05:15 PM Bug #14299 (Open): Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected
- 05:15 PM Unit Level and Cosmetic Issues #14303 (Open): Die: Need to change the "Please enter cycle time" alert message as "Please enter the Die Life cycle count"
- 05:15 PM Unit Level and Cosmetic Issues #14304 (Open): Die: When entering the value as "0000" or 0000000"11111111", Need validation for Life Cycle Count as *"The value you entered is not valid"*
- 05:15 PM Bug #14344 (Open): Production OEE(Die Life Cycle): When the actual quantity(1065) exceeded from the life cycle count(1000), the part details is not showing in the screen
- 05:14 PM Bug #14347 (Open): Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the classification of the die
- 05:14 PM Bug #14349 (Open): Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert message is not displayed and also not redirecting to the die master screen
- 05:13 PM Bug #14358 (Open): Equipment Part-Die Linkage: The system should not allow user to map the Expired die for the selected Equipment-Part linkage
- 05:12 PM Bug #13962 (Not Fixed with Hotfix): Template 1 & Template 2 some of fields are not matching after publishing
- Still the issue occur. Some fields are displayed after publish
- 05:11 PM Bug #13962 (Fixed with Hotfix): Template 1 & Template 2 some of fields are not matching after publishing
- 05:10 PM Bug #13962 (Open): Template 1 & Template 2 some of fields are not matching after publishing
- 02:56 PM Bug #13962 (Closed): Template 1 & Template 2 some of fields are not matching after publishing
- Name are displayed. closing this issue cycle in 1 915
- 05:12 PM Bug #14372 (Open): Business Rule: Target Value settings--> Target value may be 35.6, here not able to enter the value in the field
- 10:54 AM Bug #14372 (Not Fixed with Hotfix): Business Rule: Target Value settings--> Target value may be 35.6, here not able to enter the value in the field
- Business Rule: Target Value settings--> The system should not allow user to enter any special characters other than "...
- 05:12 PM Bug #14374 (Open): Business Rule: Target Value settings--> Unit of measurement field is missing
- 11:08 AM Bug #14374 (Closed): Business Rule: Target Value settings--> Unit of measurement field is missing
- Business Rule: Target Value settings--> Unit of measurement field is missing
- 05:12 PM Bug #14375 (Open): Business Rule--> Target value-->Need to capture Overall target value for the individual report
- 11:17 AM Bug #14375 (Closed): Business Rule--> Target value-->Need to capture Overall target value for the individual report
- 1. Maintenance Cost: Need separate Field to capture target value of Maintenance cost report to analysis the total tar...
- 05:11 PM Unit Level and Cosmetic Issues #14377 (Open): Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- 11:51 AM Unit Level and Cosmetic Issues #14377 (Closed): Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- 05:11 PM Bug #14378 (Open): Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- 12:02 PM Bug #14378 (Closed): Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- 05:11 PM Bug #14386 (Open): Business Rule: Reminder setting tab--> The system should not display the duration value "Zero" as default
- 12:57 PM Bug #14386 (Closed): Business Rule: Reminder setting tab--> The system should not display the duration value "Zero" as default
- Issue 1: Business Rule: Reminder setting tab--> The system should not display the duration value "Zero" as default
... - 05:10 PM Bug #14194 (Closed): Severity - Assigned Severity value is not updated in any of the Documents/Pages.
- 05:07 PM Bug #14115 (Not Resolved): Design VDA - Structure Analysis - System allows to Copy an element and Drop on another element in the Same Level. Following Issues occurs while doing the above operation.
- 04:48 PM Bug #14113 (Closed): Design VDA - Structure Analysis - While Drag and Drop any element and clicking Cancel icon, system automatically Moves the element on the Dropped element
- Closed in SP915 Cycle 2
- 04:39 PM Bug #14105 (Not Resolved): Design VDA - Structure Analysis - By Default system displays wrong count in 'From Component Level'
- 04:34 PM Bug #14102 (Not Resolved): Design VDA - Structure Analysis - Level marker remains same for all the Levels even after Expand/Collapse is done. (Refer Description)
- 04:26 PM Bug #14116 (Closed): Design VDA - Failure Analysis - For a Failure Flowdown without Requirement system displays Parent Element in the same level of Child element
- Closed in SP915 Cycle 2
- 03:50 PM Bug #14170 (Closed): Design and Process VDA - Step 7 is displayed for Percentage allocations
- Closed in SP915 Cycle 2
- 03:10 PM Bug #14017 (Not Fixed with Hotfix): Perform Audit-> Primary & secondary contact person only need to display in Auditee field in cummins report . Current its display the global process owner.
- 03:10 PM Bug #14017: Perform Audit-> Primary & secondary contact person only need to display in Auditee field in cummins report . Current its display the global process owner.
- Still the issue occur
- 03:04 PM Bug #13980 (Closed): Remove the old standards in Template 1 & 2 and the field should be displayed the audit program name
- 03:04 PM Bug #13980: Remove the old standards in Template 1 & 2 and the field should be displayed the audit program name
- Verified in cycle2 915
- 02:57 PM Bug #13984 (Closed): After publishing, Auditor & Auditee name are missing in some fields.
- Verified in cycle 1(915)
- 02:33 PM Bug #14000 (Closed): Entity name need to display in process fields as per requirement
- Verified in Sp915
- 01:44 PM Bug #13960 (Yet to Verify): No validation is set for Copy & Paste in score tab
- Score value not able to enter
- 01:44 PM Bug #13829 (Closed): Groups -> Unable to add supplier contact person(S) as an auditee in auditee group. The user list is not showing the list in user list page
- Verified
- 01:42 PM Bug #11417 (Closed): LPA While Uploading Manual NC/OFI Category is not displaying in the drop down
- Verified
- 01:08 PM Bug #13999 (Closed): Audit status is not displayed after publishing.It can be text or color.If color it is Better
- Verified .Issue only in published document
- 01:07 PM Bug #14003 (Closed): Nc details & System improvement tab is missing, while clicking from the auditee response page
- Okay
- 01:06 PM Bug #14004 (Closed): Once its published data is not displayed after auditee response through advanced car
- 01:06 PM Bug #14004: Once its published data is not displayed after auditee response through advanced car
- they have removed the nc details page.
- 12:14 PM Bug #14369 (Closed): Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- 12:14 PM Bug #14369 (Fixed with Hotfix): Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- 12:14 PM Bug #14369: Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- Could not be able to replicate this issue
- 12:13 PM Bug #14369 (Open): Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- 10:20 AM Bug #14369 (Closed): Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail conten...
10/15/2019
- 06:18 PM Bug #13997 (Closed): While hovering icon is hidden in checklist page
- Verified in SP915-CY2 on 15-10-2019
- 05:51 PM Bug #14011 (Closed): Reports -> LPA - Audit Plan Vs Actual Adherence report is not working as expected. Getting an error after clicking on View Report
- Verified in SP915-CY2 on 15-10-2019
- 05:50 PM Bug #13893 (Closed): Corrective Actions -> Submit button is not working inside car approach form
- Verified in SP915-CY2 on 15-10-2019
- 05:50 PM Unit Level and Cosmetic Issues #13896 (Closed): Perform Audit -> Upload NC/OFI tab -> Upload NC / OFI button is not displayed under respective tab
- Verified in SP915-CY2 on 15-10-2019
- 05:49 PM Bug #14012 (Closed): Report Menu -> Newly added reports are not displayed based on access right
- Verified in SP915-CY2 on 15-10-2019
- 05:40 PM Bug #14006 (Closed): While changing templates in audit program should not reflect in closed out & ongoing audits but it change in ready to perform audit.
- Verified in SP915-CY2 on 15-10-2019
- 05:40 PM Bug #13891 (Closed): Perform audit -> Upload OFI -> Clause field should not be mandatory. The field should be optional
- Verified in SP915-CY2 on 15-10-2019
- 05:33 PM Bug #13853 (Closed): LPA Audit Schedule Logic -> The schedule is not created for all the months for an equipment
- Verified in SP915-CY2 on 15-10-2019
- 05:32 PM Unit Level and Cosmetic Issues #13892 (Closed): Perform Audit -> Audit status -> Bench Mark label should be renamed as "Benchmark"
- Verified in SP915-CY2 on 15-10-2019
- 05:32 PM Bug #14358 (Closed): Equipment Part-Die Linkage: The system should not allow user to map the Expired die for the selected Equipment-Part linkage
- Equipment Part-Die Linkage: The system should not allow user to map the Expired die for the selected Equipment-Part ...
- 05:30 PM Bug #13948 (Closed): Process/Activities ->Process Clause mapping screen when clicked on save without modifying any thing displays Delete Confirmation message
- Verified in SP915-CY2 on 15-10-2019
- 05:29 PM Bug #13941 (Closed): LPA : Audit report publish is not working as expected
- Verified in SP915-CY2 on 15-10-2019
- 05:29 PM Bug #13949 (Closed): Perform Audit->Upload Audit record when clicked displays alert as "Please set Doc Pro Level in Business Rule" though level is selected in BR
- Verified in SP915-CY2 on 15-10-2019
- 05:29 PM Bug #13950 (Closed): LPA category after delete displays Blank page
- Verified in SP915-CY2 on 15-10-2019
- 05:28 PM Bug #13965 (Closed): Assign audit type and form window when closed after assigning form displays alert as "It looks like you have been editing something. If you leave before saving, your changes will be lost."
- Verified in SP915-CY2 on 15-10-2019
- 05:28 PM Bug #13885 (Closed): Not able to save the Template from the schedule which is already created
- Verified in SP915-CY2 on 15-10-2019
- 05:27 PM Bug #13959 (Closed): Minus values should not displayed in Template 1
- Verified in SP915-CY2 on 15-10-2019
- 05:26 PM Bug #13879 (Closed): Auditor(s) are not displaying in Layer screen when tried to map auditor for a layer
- Verified in SP915-CY2 on 15-10-2019
- 05:24 PM Bug #13880: Unable to create actual audit after confirmed the status still its in tentative status
- Verified in SP915-CY2 on 15-10-2019
- 05:24 PM Bug #13880 (Closed): Unable to create actual audit after confirmed the status still its in tentative status
- Verified
- 05:23 PM Bug #12069: We should able to add and scheduler the part while status inprogress and completed
- Verified in SP915-CY2 on 15-10-2019
- 05:23 PM Bug #12069 (Closed): We should able to add and scheduler the part while status inprogress and completed
- 05:23 PM Bug #12069: We should able to add and scheduler the part while status inprogress and completed
- Verified
- 05:23 PM Bug #13967 (Closed): Non conformity filed entered description is not displaying fully in audit report publish
- Verified in SP915-CY2 on 15-10-2019
- 05:21 PM Bug #13976 (Closed): Audit report publish alert message is not displaying when clicked on submit
- Verified in SP915-CY2 on 15-10-2019
- 05:20 PM Bug #13977 (Closed): After submitting Audit report using customer template with all the marked fields in screen shot are filled and retrieved displays blank
- Verified in SP915-CY2 on 15-10-2019
- 05:17 PM Bug #13981 (Closed): when clicked on Reset button from LPA category screen displays breadcrumb and Audit program data from audit pro
- Verified in SP915-CY2 on 15-10-2019
- 05:17 PM Bug #13983 (Closed): When clicked on response date extension displays error
- Verified in SP915-CY2 on 15-10-2019
- 05:16 PM Bug #13995 (Closed): When customer report viewed from Audit status screen of the particular audit program displays server error
- Verified in SP915-CY2 on 15-10-2019
- 05:16 PM Bug #13877 (Closed): Labels not Converted in Frequency drop down of audit mode
- Verified in SP915-CY2 on 15-10-2019
- 05:14 PM Bug #14001 (Closed): Map entity ->Show all audit programs when clicked navigation buttons displays in large size
- Verified in SP915-CY2 on 15-10-2019
- 05:14 PM Unit Level and Cosmetic Issues #14009 (Closed): For OFI Clause field displays (Opt Opt) twice
- Verified in SP915-CY2 on 15-10-2019
- 05:14 PM Bug #14015 (Closed): Audit Program List -> LPA Program name should not be displayed in listing page
- Verified in SP915-CY2 on 15-10-2019
- 05:05 PM Bug #14013 (Closed): Response date extension and action owner change request is not displaying to respective auditors
- Verified in SP915-CY2 on 15-10-2019
- 05:05 PM Bug #14059 (Closed): Checklist Score - Setup ->Color code selection popup is not displaying for newly created checkpoint
- Verified in SP915-CY2 on 15-10-2019
- 05:05 PM Bug #14060 (Closed): Checklist Score - Setup ->System is not allowing to create new section or sub section under compliance
- Verified in SP915-CY2 on 15-10-2019
- 05:05 PM Bug #14061 (Closed): Checklist Score - Setup->System is not allowing to change the color code assigned to a checkpoint once after saved.
- Verified in SP915-CY2 on 15-10-2019
- 05:04 PM Bug #14062 (Closed): Checklist Score - Fill Checklist-> Color code need to be revert back to no color when selected to "Select" from the drop down
- Verified in SP915-CY2 on 15-10-2019
- 05:04 PM Bug #14007 (Closed): When clicked on Existing Audit program displays sever error
- Verified in SP915-CY2 on 15-10-2019
- 05:04 PM Bug #14016 (Closed): LPA Category -> LPA Program and Add/View clauses tab should not be displayed for LPA Program category
- Verified in SP915-CY2 on 15-10-2019
- 05:03 PM Bug #14021 (Closed): Equipment -> Checklist Tab -> The admin could edit check points once it is created. But edited information are not getting displayed while retrieving the page
- Verified in SP915-CY2 on 15-10-2019
- 05:02 PM Bug #14349 (Closed): Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert message is not displayed and also not redirecting to the die master screen
- Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert messag...
- 04:59 PM Bug #14020 (Closed): LPA Category -> Issues in LPA CATEGORY page.
- Verified in SP915-CY2 on 15-10-2019
- 04:57 PM Unit Level and Cosmetic Issues #14028 (Closed): Same Color Need to be display for all the audit cells when Scheduler not confirm the audit schedule from status drop down
- Verified in SP915-CY2 on 15-10-2019
- 04:45 PM Bug #14347 (Closed): Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the classification of the die
- Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the ...
- 04:40 PM Bug #13860 (Closed): LPA Schedule ->Duplicate checklist is displayed
- Verified in SP915-CY2 on 15-10-2019
- 04:35 PM Bug #14014 (Closed): Once its publish successfully message is not displayed in month view page.
Verified in SP915-CY2 on 15-10-2019- 04:35 PM Bug #14019: Without entering the clause it should allow me to move further based on the option "NC clause mandatory" option
Verified in SP915-CY2 on 15-10-2019- 04:35 PM Bug #14019 (Closed): Without entering the clause it should allow me to move further based on the option "NC clause mandatory" option
- 04:34 PM Bug #14110 (Closed): While Selecting the drop down list system display only the "Conditional" option
- 04:33 PM Bug #14186: Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
Verified in SP915-CY2 on 15-10-2019- 03:34 PM Bug #14186 (Closed): Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
- 04:33 PM Bug #14119 (Closed): Deselect the option is not working for Clause in Nc/OFI page
- 04:33 PM Bug #14119: Deselect the option is not working for Clause in Nc/OFI page
Verified in SP915-CY2 on 15-10-2019- 04:16 PM Unit Level and Cosmetic Issues #13832 (Closed): Supplier -> Alert message content has to change. The content "UserName Already Exists" should be renamed as "Username Already Exists"
- Verified in SP915-CY2 on 15-10-2019
- 04:13 PM Unit Level and Cosmetic Issues #13864 (Not Fixed with Hotfix): Supplier -> Spell mistake in various pages / Content change in alert message
- 2. Contact(s) -> deactivate success message "•The selected user [email protected] Decativated Sucessfully" ...
- 03:58 PM Bug #14344 (Not Resolved): Production OEE(Die Life Cycle): When the actual quantity(1065) exceeded from the life cycle count(1000), the part details is not showing in the screen
- Production OEE(Die Life Cycle): When the actual quantity(1065) exceeded from the life cycle count(1000), the part det...
- 03:57 PM Bug #14058 (Closed): Checklist Score - Setup- N/A value is not displaying for checkpoint after save and retrieve
- Verified in SP915-CY2 on 15-10-2019
- 03:55 PM Bug #14022 (Closed): Define Audit Program -> Label displaying as "THLNCClauseMandatory"
- 03:55 PM Bug #13881 (Closed): Both the Validation alerts are displaying at same time when LPA schedule is created
- 03:34 PM Bug #14189 (Closed): Sprint 4: Auditor Log - Auditor full name need to displayed in Audit plan popup
- Verified in SP915-CY2 on 15-10-2019
- 03:32 PM Bug #13966 (Closed): Un mapped auditee contact person is displaying in Audit report while publishing audit report
- Verified in SP915-CY2 on 15-10-2019
- 03:23 PM Bug #14008 (Closed): Creating a New Audit program is not getting saved and displays some other data of some other audit programs
- 01:05 PM Unit Level and Cosmetic Issues #13845 (Closed): Templates --> Planned audit and actual audit button is displayed for existing records
- Verified in SP915-CY2 on 15-10-2019
- 01:04 PM Unit Level and Cosmetic Issues #13844 (Closed): Templates -> Existing and New Template -> Label missing for supplier plant address and supplier part
- Verified in SP915-CY2 on 15-10-2019
- 01:02 PM Bug #13842 (Closed): Templates -> Existing and New Template -> Default elements are missing under "Available elements"
- Verified in SP915-CY2 on 15-10-2019
- 01:01 PM Bug #13839: All Actions -> Actions page is not working. The action list is showing "Loading" only
- Verified in SP915-CY2 on 15-10-2019
- 01:01 PM Bug #13839 (Closed): All Actions -> Actions page is not working. The action list is showing "Loading" only
- 12:51 PM Bug #13823 (Closed): Define Audit program -> Supplier Audit Program -> MAP Segment -> This option should not be displayed for Audit pro - Audit program
- Verified in SP915-CY2 on 15-10-2019
- 12:42 PM Bug #13820 (Not Resolved): Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Had a discussion with Bijoy on 30 September 2019. As per his comment it has to fix it on Sprint-5 (Regression Testing...
- 12:38 PM Bug #13817 (Closed): Auditpro Checklist -> List Score > N/A Value is not getting displayed in Status field
- Verified in SP915-CY2 on 15-10-2019
- 12:15 PM Bug #13805 (Closed): Business Rules->"NC/OFI Emails to all Auditor" option is available for Auditpro
- Verified in SP915-CY2 on 15-10-2019
10/14/2019
- 05:02 PM Unit Level and Cosmetic Issues #14304 (Closed): Die: When entering the value as "0000" or 0000000"11111111", Need validation for Life Cycle Count as *"The value you entered is not valid"*
- Die: When entering the value as "0000" or 0000000"11111111", Need validation for Life Cycle Count as *"The value you ...
- 04:39 PM Unit Level and Cosmetic Issues #14303 (Closed): Die: Need to change the "Please enter cycle time" alert message as "Please enter the Die Life cycle count"
- Die: Need to change the "Please enter cycle time" alert message as "Please enter the Die Life cycle count"
- 04:26 PM Bug #14299 (Closed): Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected
- Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected.
Condition 1: Whe... - 03:31 PM Bug #14295 (Closed): Equipment: Asset Number field--> It should not accept the same asset number for different equipment
- Issue 1: Equipment: Asset Number field--> It should not accept the same asset number for different equipment.
Issu... - 03:02 PM Bug #14283 (Closed): Equipment: Asset Number--> When entering more than 10 characters and saving the details, the system getting hanged and also alert message is not displayed
- Issue 1: Equipment: Asset Number--> When entering more than 10 characters and saving the details, the system getting ...
10/11/2019
- 02:19 PM Bug #14174 (Resolved): Requirement Tree: Same child element is displayed for different parent in Requirement tree
- 02:19 PM Bug #14164 (Resolved): FSR - While opening FSR document for Few PI(Front Impact Airbag System/Airbag), System opens Visual Studio alert. When selecting it, Session is terminated.
- 02:19 PM Bug #14138 (Resolved): EFC Tree: When selecting EFC tree diagram the parent PI itself displaying as child for the same Element
- 02:19 PM Bug #14136 (Resolved): While clicking OK button from EFC tree flow down indicator the page got hanged
- 02:19 PM Bug #14132 (Resolved): Failure Tree: Same child element is displayed for different parent in Failure tree
- 02:04 PM Bug #14135 (Resolved): EFC Tree: While opening EFC tree it contains large space at bottom of the page
- 11:30 AM Bug #14102 (Resolved): Design VDA - Structure Analysis - Level marker remains same for all the Levels even after Expand/Collapse is done. (Refer Description)
- 11:29 AM Bug #14113 (Resolved): Design VDA - Structure Analysis - While Drag and Drop any element and clicking Cancel icon, system automatically Moves the element on the Dropped element
- 11:29 AM Bug #14115 (Resolved): Design VDA - Structure Analysis - System allows to Copy an element and Drop on another element in the Same Level. Following Issues occurs while doing the above operation.
10/10/2019
- 05:39 PM Bug #13797 (Closed): Business Rules->DocPro level selector in Supplier portal is reflected in AuditPro Business Rules DocPro level selector
- working fine
- 10:54 AM Bug #14186 (Resolved): Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
- 10:54 AM Bug #14186 (Open): Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
- 10:53 AM Bug #14189 (Resolved): Sprint 4: Auditor Log - Auditor full name need to displayed in Audit plan popup
- 10:53 AM Bug #14189 (Open): Sprint 4: Auditor Log - Auditor full name need to displayed in Audit plan popup
10/09/2019
Also available in: Atom