SP 10.0.0

04/18/2020

11:52 PM Bug #16303 (In Progress): Production In-process : Mapped Operator for an operation is not displaying after some time.If user perform edit and save then getting an error alert

Anonymous

11:49 PM Bug #16303 (Open): Production In-process : Mapped Operator for an operation is not displaying after some time.If user perform edit and save then getting an error alert

Anonymous

11:50 PM Bug #16310 (Resolved): Operators : Need a provision to create data with and without selecting department

Anonymous

11:45 PM Bug #16310 (Open): Operators : Need a provision to create data with and without selecting department

Anonymous

11:50 PM Bug #16304 (Resolved): Operators : Users are listing in Operator pop-up for Production lines, for which operator is not mapped in Part Equipment Mapping

Anonymous

11:48 PM Bug #16304 (Open): Operators : Users are listing in Operator pop-up for Production lines, for which operator is not mapped in Part Equipment Mapping

Anonymous

11:44 PM Bug #16318 (In Progress): Search inspection entry:When selecting a PI by default all lot nos should be displayed .Now by default it is listing for the current day.

Anonymous

11:44 PM Bug #16318 (Open): Search inspection entry:When selecting a PI by default all lot nos should be displayed .Now by default it is listing for the current day.

Anonymous

11:41 PM Bug #15651 (Resolved): Inspected Defect Report : Instead of Inspected qty show bar chart for Lot Qty, and legend should be updated as Lot Qty

Anonymous

11:41 PM Bug #15647 (Resolved): For Receiving Inspectors having only Receiving Inspection rights,Receiving Inspection menu is not listing while login

Anonymous

11:40 PM Bug #15654 (Resolved): If any Purchased/Manufactured parent item is selected then target values are not displaying in the drop-down if Inspection is not performed for that item

Close this and make this an Action item, because inheritance is not implemented properly. So we have reconstruct the ... Anonymous

11:32 PM Bug #16204 (In Progress): Inspection parameters : UOM field is displaying as 1 after saving variable characteristics

Anonymous

11:31 PM Bug #16209 (In Progress): Operator is not listing in Inspection entry pop-up for user having Final Inspection rights only in group menu

Anonymous

11:30 PM Bug #16214 (Resolved): Users having only In-process Inspection and In-process Supervisor rights are not working as expected

Anonymous

11:27 PM Bug #16223 (In Progress): Part Equipment Mapping : Search function is not working in Operator Pop-up

Anonymous

11:27 PM Bug #16222 (In Progress): Part Equipment Mapping : Operators field should be made mandatory

Anonymous

11:27 PM Bug #16220 (In Progress): Part Equipment Mapping : Replace Inspector(s) with Operator(s) so naming can be uniform ac-cross In-process Inspection

Anonymous

11:23 PM Bug #16224 (In Progress): Target PPM : Data not getting saved

Anonymous

04/17/2020

07:41 PM Bug #16331 (Closed): Resources Allocation: Scheduled WO-->PM details--> There is no need add option in activity details

Issue 1: Resources Allocation: Scheduled WO-->PM details--> There is no need add option in activity details
Issu... Kiruthika G

07:28 PM Bug #16330 (Closed): Resources Allocation: It allowing to allocate two person for the WO in resources allocation screen

Resources Allocation: When the Max people needed option is "1", in resources allocation, it allows resources to assig... Kiruthika G

07:25 PM Bug #16329 (Closed): Cascade DB -> Perform Audit -> Upload NC / OFI ->Unassigned clauses are displayed while retrieving the page again

Cascade DB -> Perform Audit -> Upload NC / OFI ->Unassigned clauses are displayed while retrieving the page again
... Raja S

07:04 PM Bug #16327 (Closed): PM Supervisor Calendar: When completing the assigned WO as supervisor, in tooltip it shows the assigned team detail as "project planner"

PM Supervisor Calendar: When completing the assigned WO as supervisor, in tooltip it shows the assigned team detail a... Kiruthika G

06:58 PM Bug #16326 (Closed): Social Media : Report Widgets are not displaying

Social Media : Report Widgets are not displaying Anonymous

06:58 PM Bug #16325 (Closed): Business Rule->Doc pro level selector->Other settings-->Selected parent level is refreshed after selecting the holiday check need in Other settings.(Click on Doc pro level Selector & Select parent level->Click on Other settings &enble or disable holiday c

Business Rule->Doc pro level selector->Other settings
Selected parent level is refreshed after selecting the hol... Kiruthika G

06:56 PM Bug #16324 (Closed): Cascade DB -> Perform Audit -> Upload NC / OFI -> Clauses From - Process -> Duplicate Clause is displayed

Perform Audit -> Upload NC / OFI -> Clauses From - Process -> Duplicate Clause is displayed Raja S

06:56 PM Bug #16171 (Resolved): VAM audit-NC/OFI upload->NC/OFI category (NC minor,NC major) displaying multiple times in drop down

kindly verify in Cycle2 Nikhil d

06:54 PM Bug #16323 (Closed): Gage->New(Holiday check Enable & Subtract date enable)

Set holiday in Holiday list(Ex :1/1/2020,4/15/2020 , 4/17/2020 & 5/1/2020 those days are holiday) ... Kiruthika G

06:53 PM Bug #16084 (Resolved): Audit form -> After completed all the fields also,it displays error as " you have been editing something,if leave without saving the data".We are able close the audit form tab, when alert throw as " please set business rule"

cannot able to replicate. Kindly Help me to replicate Nikhil d

01:49 PM Bug #16084 (In Progress): Audit form -> After completed all the fields also,it displays error as " you have been editing something,if leave without saving the data".We are able close the audit form tab, when alert throw as " please set business rule"

Nikhil d

06:33 PM Bug #16313: Existing DB: LPA Adhoc audit Schedule Auditor and Auditee availability confirmation action is not displaying to Auditor and Auditee

Duplicate #16187 Nikhil d

05:27 PM Bug #16313 (Closed): Existing DB: LPA Adhoc audit Schedule Auditor and Auditee availability confirmation action is not displaying to Auditor and Auditee

Adhoc audit Schedule Auditor and Auditee availability confirmation action is not displaying to Auditor and Auditee Anonymous

06:13 PM Bug #16322 (Closed): SP921.1 Hotfix -> Internal ->Cascade DB-> Fill Checklist -> The NC/OFI status is displaying as "No NC" if select N/A value from list

SP921.1 Hotfix -> Internal ->Cascade DB-> Fill Checklist -> The NC/OFI status is displaying as "No NC" if select N/A ... Raja S

06:12 PM Bug #16321 (Closed): when the plan is awaiting for approval then in the PPAP it is allowing to baseline the project

when the plan is awaiting for approval then in the PPAP it is allowing to baseline the project Anonymous

06:10 PM Reports #16320 (Closed): Clicking on resource tracking reports it is showing error.

when the plan is awaiting for approval then in the PPAP it is allowing to baseline the project Anonymous

06:05 PM Bug #16319 (Closed): SP925.2 HotFix -> Husco Training | Fill checklist: Logic is not getting displayed if use list scoe + without score on checkpoints

SP925.2 HotFix -> Husco Training | Fill checklist: Logic is not getting displayed if use list scoe + without score on... Raja S

06:05 PM Bug #16318 (Closed): Search inspection entry:When selecting a PI by default all lot nos should be displayed .Now by default it is listing for the current day.

Search inspection entry:When selecting a PI by default all lot nos should be displayed .Now by default it is listing ... Anonymous

06:04 PM Reports #16317 (Closed): Resource Allocation Report- The resource should list based on the project selection

The resource assigned to the selected project should list in the dropdown. Now all resources are showing up. malini C

05:53 PM Bug #16316 (Closed): Mail Interrupt: Daily Update and Task Escalation Mail getting interrupt

Mail Interrupt: Daily Update and Task Escalation Mail getting interrupt Anonymous

05:36 PM Bug #16315 (Closed): CpCpkPpPpk values are not displaying in In-process Inspection sheet

CpCpkPpPpk values are not displaying in In-process Inspection sheet Anonymous

05:21 PM Bug #16312 (Closed): In-process Inspection : LSL,USL Reference value are displayed as Zero in SPC Charts

In-process Inspection : LSL,USL Reference value are displayed as Zero in SPC Charts Anonymous

05:15 PM Bug #16311 (Closed): Dynamic Preliminary Architecture - Interface line drawn for one architecture is displayed for all the newly added architectures

Interface line drawn for one architecture is displayed for all the newly added architectures Shankar Narayanan

04:40 PM Bug #16310 (Closed): Operators : Need a provision to create data with and without selecting department

Operators : Need a provision to create data with and without selecting department
Currently we can create either w... Anonymous

04:30 PM Bug #16309 (Closed): LPA : Auditor and Auditee confirmation emails is not generating to scheduler whether confirm/not confirm

Auditor and Auditee confirmation emails is not generating to scheduler whether confirm/not confirm Anonymous

04:25 PM Bug #16308 (Closed): Customer Usability -> Upload NC / OFI -> Process list is not displaying fully when try to upload nc or ofi after adding audit result as "Reaudit" or "NC Identified"

Customer Usability -> Upload NC / OFI -> Process list is not displaying fully when try to upload nc or ofi after addi... Raja S

04:08 PM Bug #16177 (In Progress): Multi language - View the description

Jacqueline Antonette

04:07 PM Bug #16307 (Closed): IATF Audit report Form -> Signature is not displaying on lead auditor signature on top. But the same is displayed on bottom of the page

IATF Audit report Form -> Signature is not displaying on lead auditor signature on top. But the same is displayed on ... Anonymous

03:56 PM Suggestion #16306 (Closed): Die - Kindly handle the die configuration as separate license

Die - Kindly handle the die configuration as separate license. As per the chad advice Kiruthika G

03:56 PM Bug #16305 (Closed): APQP FST document linkage Issues- Mandatory approval not needed.

Attached the issues faced during FST document linkage- malini C

03:52 PM Bug #16304 (Closed): Operators : Users are listing in Operator pop-up for Production lines, for which operator is not mapped in Part Equipment Mapping

Operators : Users are listing in Operator pop-up for Production lines, for which operator is not mapped in Part Equip... Anonymous

03:47 PM Bug #16303 (Closed): Production In-process : Mapped Operator for an operation is not displaying after some time.If user perform edit and save then getting an error alert

Production In-process : Mapped Operator for an operation is not displaying after some time.If user perform edit and s... Anonymous

03:46 PM Bug #16302 (Closed): (Mozilla)State Transition Diagram - Image option is not displayed properly.(Refer Description)

same issue occurs in Dynamic Preliminary Architecture also Shankar Narayanan

03:42 PM Bug #16301 (Closed): In the reports Project group dropdown is showing blank for Multi site

In the project summary report Project group dropdown is showing blank for Multi site( Corporate it is working facing ... malini C

03:32 PM Bug #16300 (Closed): State Transition Diagram - Diagram displays a Toolbox and Tools menu options simultaneously. (Refer Description)

• Page alignment is not good Shankar Narayanan

03:24 PM Bug #16299 (Closed): (Chrome Browser)Dynamic Preliminary Architecture - Stencil box displays only rectangle box alone.

All other shapes and options are not displayed. Shankar Narayanan

03:20 PM Bug #16298 (Closed): Business Rule-->Doc pro level--> When tries to change the parent level, it shows alert like "Problem occurs while saving data"

Business Rule-->Doc pro level--> When tries to change the parent level, it shows alert like "Problem occurs while sav... Kiruthika G

03:20 PM Bug #16297 (Closed): SP906.1 Hotfix -> Cascade Engineering -Hungary ->Checkpoint parameters are visible in checklist, but disappeared from List of Checkpoint parameters

SP906.1 Hotfix -> Cascade Engineering -Hungary ->Checkpoint parameters are visible in checklist, but disappeared from... Raja S

03:15 PM Bug #16296 (Closed): Multi Language : Please see the below mentioned labels which are not converted

Multi Language : Please see the below mentioned labels which are not converted Anonymous

03:02 PM Bug #16294 (Closed): NC/OFI page-> Data not saved error is displayed . While using the special character in NC Description

Data :
<
"'A karantén területén/\: lévő 4613-000 (W191001049)*: Back- {állapotú} "termék nincs"[ <megjelölve>\\|]; ... Anonymous

02:47 PM Bug #16293 (Closed): Cummins DB-Reports menu is missing though groups rights has given for the User.Pls refer screen shot

Cummins DB-Reports menu is missing though groups rights has given for the User.Pls refer screen shot Saradha Balan

02:30 PM Bug #16292 (Closed): Cummins DB-Application error message shows in dashboard section in social media supplier contact login

Cummins DB-Application error message shows in dashboard section in social media supplier contact login Saradha Balan

02:14 PM Bug #16291 (Closed): Dynamic Preliminary Architecture - Label for Rectangle is not applied

Label for Rectangle is not applied Shankar Narayanan

02:02 PM Bug #16290 (Closed): Main2: Global Search, the Searched word is not "highlighting" and "Ctrl+f3" is not working in the opened document

Main2: Global Search, the Searched word is not "highlighting" and "Ctrl+f3" is not working in the opened document Anonymous

01:44 PM Bug #16289 (Closed): Main2: Can't able to use the created New Format by Adding Few Documents in the New Format using Add from Other option

Main2: Can't able to use the created New Format by Adding Few Documents in the New Format using Add from Other option Anonymous

01:35 PM Bug #16287 (Closed): SP906 -> Pandora - VOC -> SB-19079975 Level tree is not displayed when we use entity searching

SP906 -> Pandora - VOC -> SB-19079975 Level tree is not displayed when we use entity searching. While search, child e... Raja S

01:11 PM Bug #16286 (Closed): SP906 -> Pandora - VOC -> SB-200110933 Cannot upload document if the file name contains special character"&" in Audit Pro Closed out attachment

SP906 -> Pandora - VOC -> SB-200110933 Cannot upload document if the file name contains special character"&" in Audit... Raja S

01:07 PM Bug #16285 (Closed): Plant Configuration & Equipment -->If selecting the Activity for the Plant Configuration and Equipment, it should display the selected activity in Equipment activity as well as in PM Work order maintenance detail screen

Plant Configuration & Equipment -->If selecting the Activity for the Plant Configuration and Equipment, it should dis... Kiruthika G

12:55 PM Bug #16284 (Closed): Main2: While try to Create a New Production Item after working on the Opened Document or doing some thing on the PI Document its displaying JS Error

In Main2, If the User opens the document and working for a while and he tries to create a *New Production Item* its d... Anonymous

12:52 PM Bug #16283 (Closed): Main2: While try to Create a New Format after working on the Opened Document or doing some thing on the PI Document its displaying JS Error

In Main2, If the User opens the document and working for a while and he tries to create a New Format its displaying J... Anonymous

12:50 PM Bug #16282 (Closed): Cummins DB-Error page displays in Business Unit Master screen.Pls refer screen shot

Cummins DB-Error page displays in Business Unit Master screen.Pls refer screen shot Saradha Balan

12:16 PM Bug #16281 (Closed): Activity Master --> If user editing or updating some data for existing activity which is used in Plant configuration or Equipment's activity or maintenance. The updated one is not showing in the following menu

Activity Master --> If user editing or updating some data for existing activity which is used in Plant configuration ... Kiruthika G

12:04 PM Bug #16280 (Closed): Calendar--> If the Reschedule and cancel button is disable, the Legend with color code should not display in PM Supervisor calendar and PM calendar.

Calendar--> If the Reschedule and cancel button is disable, the Legend with color code should not display in PM Super... Kiruthika G

12:00 PM Bug #16279 (Closed): Equipment--->Without editing the information, when clicking on Activity tab, it showing “Updated successfully” alert message.

Equipment--->Without editing the information, when clicking on Activity tab, it showing “Updated successfully” alert ... Kiruthika G

11:58 AM Bug #16278 (Closed): OEE-->Our Flow: The Losses screen displays only after the saving the Part information

OEE-->Our Flow: The Losses screen displays only after the saving the Part information
Need Fix: ... Kiruthika G

11:55 AM Bug #16277 (Closed): CBM--->Need mouse pointer access for users to enter the value in the CBM data entry screen.

CBM--->Need mouse pointer access for users to enter the value in the CBM data entry screen.
Bijoy Concern:
The ... Kiruthika G

11:52 AM Bug #16276 (Closed): PM Calendar-->When maintenance person allocated for CBM or UBM or Autonomous or Adhoc maintenance activity, the PM type should display based on the allocated PM Type.(Here it displays TBM as default)

PM Calendar-->When maintenance person allocated for CBM or UBM or Autonomous or Adhoc maintenance activity, the PM ty... Kiruthika G

11:48 AM Bug #16275 (Closed): Plant configuration --> If user selecting the activity without entering the Rule, it should display in Equipment activity screen

Plant configuration --> If user selecting the activity without entering the Rule, it should display in Equipment acti... Kiruthika G

09:27 AM Bug #16203 (Resolved): VAM&VEM audit-First time scheduled audit not reflecting in perform audit page.Updating the same audit able to see in perform audit page

Not an issue. Found Batch service is enabled in server. so it will take time to publish Nikhil d

08:37 AM Bug #16274 (Open): SP906.5 Hotfix -> Pandora -> Standard name has to display instead of program name in audit closed out and upload NC / OFI

User Admin

08:37 AM Bug #16273 (Open): (Issue in chrome)Aqua pro Rights-->Equipment part linkage--> Select production part--> Search option is not working

User Admin

08:37 AM Bug #16272 (Open): CBM: If the value is above to the standard range(Min - 2 max - 5 and enter the value as 20 in first row), the red indication is changed to Green color when clicking the completed WO

User Admin

08:37 AM Bug #16271 (Open): SP906 Customization (Abatek) - Supplier rating report Audit summary report / Specific supplier report is not displaying in fill check list and perform audit page

User Admin

08:37 AM Bug #16270 (Open): 8D CAR -> The added responsibility due date and actual date is not getting displayed from Row 2 under all categories

User Admin

08:37 AM Bug #16269 (Open): SP906.5 Hotfix -> NXP->All CAR Approaches -> All Fields ->Copy option is not displayed if special characters are used in all fields on all forms ex: <<>>

User Admin

08:37 AM Bug #16268 (Open): CAR Form-> Root cause description -> The modified data is not getting displayed. Empty row is displayed

User Admin

08:37 AM Bug #16267 (Open): SP906.7 Hotfix -> KIML -> SB-200311211 -> Current audit status has to be view in the corrective action page and related issue fixes are not included

User Admin

08:37 AM Bug #16266 (Open): Master->Calibration, Calibration verification and Linearity--> In master screen ,select the frequency as "2 months".In study screen change the frequency as "1 day".When tries to verify this frequency in master screen after complete the study it showing ch

User Admin

08:37 AM Bug #16265 (Open): Master->Calibration Study(Inhouse)-->Before complete the study the next due date is updated in master screen.Even study in onhold status the next due date also updated in master screen

User Admin

08:37 AM Bug #16264 (Open): Calibration, Calibration verification and Bias-->Date Received-->Allows to select the future date

User Admin

12:14 AM Bug #16212 (Resolved): Receiving Inspection and Supervisor Approval Page is not displaying for user having Receiving Inspection Supervisor rights

Anonymous

12:14 AM Bug #16211 (Resolved): Receiving Inspection Menu is not displaying for user having Receiving Inspection rights only in Group Menu

Anonymous

04/16/2020

08:20 PM Bug #16274 (Closed): SP906.5 Hotfix -> Pandora -> Standard name has to display instead of program name in audit closed out and upload NC / OFI

SP906.5 Hotfix -> Pandora -> Standard name has to display instead of program name in audit closed out and upload NC /... Raja S

08:11 PM Bug #16273 (Closed): (Issue in chrome)Aqua pro Rights-->Equipment part linkage--> Select production part--> Search option is not working

Equipment part linkage--> Select production part--> Search option is not working Kiruthika G

08:08 PM Bug #16272 (Closed): CBM: If the value is above to the standard range(Min - 2 max - 5 and enter the value as 20 in first row), the red indication is changed to Green color when clicking the completed WO

CBM: If the value is above to the standard range(Min - 2 max - 5 and enter the value as 20 in first row), the red ind... Kiruthika G

08:06 PM Bug #16271 (Closed): SP906 Customization (Abatek) - Supplier rating report Audit summary report / Specific supplier report is not displaying in fill check list and perform audit page

SP906 Customization (Abatek) - Supplier rating report Audit summary report / Specific supplier report is not displayi... Raja S

07:56 PM Bug #16270 (Closed): 8D CAR -> The added responsibility due date and actual date is not getting displayed from Row 2 under all categories

8D CAR -> The added responsibility due date and actual date is not getting displayed from Row 2 under all categories Raja S

07:53 PM Bug #16269 (Closed): SP906.5 Hotfix -> NXP->All CAR Approaches -> All Fields ->Copy option is not displayed if special characters are used in all fields on all forms ex: <<>>

SP906.5 Hotfix (NXP)->All CAR Approaches -> All Fields ->Copy option is not displayed if special characters are used ... Raja S

07:06 PM Bug #16268 (Closed): CAR Form-> Root cause description -> The modified data is not getting displayed. Empty row is displayed

CAR Form-> Root cause description -> The modified data is not getting displayed. Empty row is displayed Raja S

06:58 PM Bug #16267 (Closed): SP906.7 Hotfix -> KIML -> SB-200311211 -> Current audit status has to be view in the corrective action page and related issue fixes are not included

SP906.7 Hotfix -> KIML -> SB-200311211 -> Current audit status has to be view in the corrective action page and relat... Raja S

06:58 PM Bug #16266 (Closed): Master->Calibration, Calibration verification and Linearity--> In master screen ,select the frequency as "2 months".In study screen change the frequency as "1 day".When tries to verify this frequency in master screen after complete the study it showing ch

Master->Calibration, Calibration verification and Linearity--> In master screen ,select the frequency as "2 months".I... Kiruthika G

06:50 PM Bug #16265 (Closed): Master->Calibration Study(Inhouse)-->Before complete the study the next due date is updated in master screen.Even study in onhold status the next due date also updated in master screen

Master->Calibration Study(Inhouse)--->Before complete the study the next due date is updated in master screen.Even st... Kiruthika G

06:47 PM Bug #16264 (Closed): Calibration, Calibration verification and Bias-->Date Received-->Allows to select the future date

Issue 1: Calibration->Date Received-->Allows to select the future date
Issue 2: Calibration Verification -->Calibr... Kiruthika G

06:46 PM Bug #13265 (Closed): Email content is blank,when a concern is created from IC

Anonymous

06:45 PM Bug #16238 (Open): VOC Traceability - Traceability popup displays duplicate items

Smitha V

01:28 PM Bug #16238 (Closed): VOC Traceability - Traceability popup displays duplicate items

All the items are displayed 5 times.
Issue occurs in RFD also Shankar Narayanan

06:45 PM Bug #16237 (Open): SP906.1 Hotfix -> NXP -> Set CAR as default Auditee Response Approach - This is not inlcuded

Smitha V

01:15 PM Bug #16237 (Closed): SP906.1 Hotfix -> NXP -> Set CAR as default Auditee Response Approach - This is not inlcuded

SP906.1 Hotfix -> NXP -> Set CAR as default Auditee Response Approach in upload nc and OFI Raja S

06:45 PM Suggestion #16236 (Open): Suite : Select should not go to the bottom after route is created and saved in Escalation routes

Smitha V

01:12 PM Suggestion #16236 (Closed): Suite : Select should not go to the bottom after route is created and saved in Escalation routes

Select should not go to the bottom after route is created and saved in Assign routes Anonymous

06:45 PM Bug #16235 (Open): Suite : When clicked on Non working details icon in shift page for a shift to which no non working details are not specified a popup is blinks and go in a fraction of seconds

Smitha V

01:03 PM Bug #16235 (Closed): Suite : When clicked on Non working details icon in shift page for a shift to which no non working details are not specified a popup is blinks and go in a fraction of seconds

When clicked on Non working details icon in shift page for a shift to which no non working details are not specified ... Anonymous

06:45 PM Bug #16234 (Open): New Document Request - Document are not getting listed in TOC for the following scenario. View the description

Smitha V

12:56 PM Bug #16234 (Closed): New Document Request - Document are not getting listed in TOC for the following scenario. View the description

New Document Request
1.Login as a Module admin
2.Request Document
3.The Published documents are not getting li... Ragavi Ram

06:45 PM Bug #16233 (Open): SP906.1 (Internal) -> Audit Report -> Template 1 ->Auditess are not showing correctly. Unassigned auditee is displayed.

Smitha V

12:48 PM Bug #16233 (Closed): SP906.1 (Internal) -> Audit Report -> Template 1 ->Auditess are not showing correctly. Unassigned auditee is displayed.

Audit Report -> Template 1 ->Auditess are not showing correctly. Unassigned auditee is displayed.
Expected Result... Raja S

06:45 PM Suggestion #16232 (Open): Create Production item Window - Add button can be changed as Add/Remove PI

Smitha V

12:44 PM Suggestion #16232 (Closed): Create Production item Window - Add button can be changed as Add/Remove PI

Add button can be changed as Add/Remove PI.
Must be changed in all PI creation windows Shankar Narayanan

06:45 PM Bug #16231 (Open): Process VDA - Structure Analysis - While adding the existing FourM system duplicates the FourM in Structure Analysis page. But on refresh it displays only one time.

Smitha V

12:25 PM Bug #16231 (Closed): Process VDA - Structure Analysis - While adding the existing FourM system duplicates the FourM in Structure Analysis page. But on refresh it displays only one time.

While adding the existing FourM system duplicates the FourM in Structure Analysis page. But on refresh it displays on... Shankar Narayanan

06:45 PM Bug #16230 (Open): Find and verify root cause -> Root cause Description is not displayed after edit.

Smitha V

02:30 PM Bug #16230: Find and verify root cause -> Root cause Description is not displayed after edit.

Meena Venkat wrote:
> http://ew.omnex.in/EwQIMS_Inst3/
>
> username :petob
> Pwd: a1
>
>
> Data: "'A karant... Anonymous

12:23 PM Bug #16230 (Closed): Find and verify root cause -> Root cause Description is not displayed after edit.

http://ew.omnex.in/EwQIMS_Inst3/
username :petob
Pwd: a1
Data: "'A karantén területén/\: lévő 4613-000 (W191... Anonymous

06:45 PM Bug #16229 (Open): Design and Process VDA - Scrollbars are not present in (RHS) Tree/Table view(Refer Description)

Smitha V

12:08 PM Bug #16229 (Closed): Design and Process VDA - Scrollbars are not present in (RHS) Tree/Table view(Refer Description)

• In Process VDA Scroll is present while opening the Functional/Failure Analysis directly.
• In Design VDA scroll ... Shankar Narayanan

06:45 PM Bug #16228 (Open): Process VDA - Structure Analysis - Horizontal scrollbar is not present in Structure Analysis page

Smitha V

11:56 AM Bug #16228 (Closed): Process VDA - Structure Analysis - Horizontal scrollbar is not present in Structure Analysis page

Horizontal scrollbar is not present in Structure Analysis page Shankar Narayanan

06:45 PM Bug #16227 (Open): Suite : Assign department ->After assigning department contact person ->Search window input field is not accepting Cursor in to the field

Smitha V

11:31 AM Bug #16227 (Closed): Suite : Assign department ->After assigning department contact person ->Search window input field is not accepting Cursor in to the field

Assign department ->After assigning department contact person ->Search window input field is not accepting Cursor in ... Anonymous

06:45 PM Bug #16225 (Open): Suite : Skill matrix is displaying error even after deploying report.

Smitha V

11:22 AM Bug #16225 (Closed): Suite : Skill matrix is displaying error even after deploying report.

Skill matrix is displaying error even after deploying report. Anonymous

06:45 PM Bug #16224 (Open): Target PPM : Data not getting saved

Smitha V

11:15 AM Bug #16224 (Closed): Target PPM : Data not getting saved

Target PPM : Data not getting saved Anonymous

06:45 PM Bug #16223 (Open): Part Equipment Mapping : Search function is not working in Operator Pop-up

Smitha V

11:02 AM Bug #16223 (Closed): Part Equipment Mapping : Search function is not working in Operator Pop-up

Part Equipment Mapping : Search function is not working in Operator Pop-up Anonymous

06:45 PM Bug #16222 (Open): Part Equipment Mapping : Operators field should be made mandatory

Smitha V

10:56 AM Bug #16222 (Closed): Part Equipment Mapping : Operators field should be made mandatory

Part Equipment Mapping : Operators field should be made mandatory
Also View record count is not displayed correctly Anonymous

06:45 PM Bug #16221 (Open): Suite : Entity owners after User is mapped no slide bar is required.

Smitha V

10:54 AM Bug #16221 (Closed): Suite : Entity owners after User is mapped no slide bar is required.

Entity owners after User is mapped no slide bar is required. Anonymous

06:45 PM Bug #16220 (Open): Part Equipment Mapping : Replace Inspector(s) with Operator(s) so naming can be uniform ac-cross In-process Inspection

Smitha V

10:47 AM Bug #16220 (Closed): Part Equipment Mapping : Replace Inspector(s) with Operator(s) so naming can be uniform ac-cross In-process Inspection

Part Equipment Mapping : Replace Inspector(s) with Operator(s) so naming can be uniform ac-cross In-process Inspection Anonymous

06:45 PM Bug #16219 (Open): The notification (Bell) Icon in not showing in APQP

Smitha V

10:17 AM Bug #16219 (Closed): The notification (Bell) Icon in not showing in APQP

The notification (Bell) Icon in not showing in APQP.
In the social media layout the bell icon is not showing for Ch... malini C

06:45 PM Bug #15651 (Open): Inspected Defect Report : Instead of Inspected qty show bar chart for Lot Qty, and legend should be updated as Lot Qty

Smitha V

06:45 PM Bug #16263 (Open): Groups->User->Search-->Search ->Condition is not showing(Ex: contains, begin with etc….)

Smitha V

06:44 PM Bug #16263 (Closed): Groups->User->Search-->Search ->Condition is not showing(Ex: contains, begin with etc….)

Groups->User->Search-->Search ->Condition is not showing(Ex: contains, begin with etc….) Kiruthika G

06:45 PM Bug #16262 (Open): Husco Customization-->(Moved from SP906.1)

Smitha V

06:34 PM Bug #16262 (Closed): Husco Customization-->(Moved from SP906.1)

1. Import gage dynamic fields through excel import. 2. Gage Study Due Report Customization (Attached sample report) Kiruthika G

06:45 PM Bug #16260 (Open): All CAR Approaches -> Error message displayed as "Error from run import" while try to save with 200+ Characters

Smitha V

06:20 PM Bug #16260 (Closed): All CAR Approaches -> Error message displayed as "Error from run import" while try to save with 200+ Characters

All CAR Approaches -> Error message displayed as "Error from run import" while try to save with 200+ Characters
Raja S

06:45 PM Bug #16259 (Open): Email--> Linearity Emails--> Reminder mail of linearity generating as escalation mail for Bias. Refer screenshot

Smitha V

06:19 PM Bug #16259 (Closed): Email--> Linearity Emails--> Reminder mail of linearity generating as escalation mail for Bias. Refer screenshot

Email--> Linearity Emails--> Reminder mail of linearity generating as escalation mail for Bias. Refer screenshot Kiruthika G

06:45 PM Bug #16256 (Open): Suite : Meetings agenda calendar is displaying without any border

Smitha V

05:15 PM Bug #16256 (Closed): Suite : Meetings agenda calendar is displaying without any border

Meetings agenda calendar is displaying without any border Anonymous

06:45 PM Bug #16255 (Open): Cant able to view concern closure details in Business Rule Page.

Smitha V

04:57 PM Bug #16255 (Closed): Cant able to view concern closure details in Business Rule Page.

Cant able to view concern closure details in Business Rule Page. Rupa K

06:45 PM Bug #16254 (Open): Combined Interface Matrix - Does not display allocated child elements

Smitha V

04:55 PM Bug #16254 (Closed): Combined Interface Matrix - Does not display allocated child elements

Combined Interface Matrix Does not display allocated child elements Shankar Narayanan

06:45 PM Bug #16252 (Open): Cant able to view the 8D HW form, It shows "Data cannot be found" error

Smitha V

04:53 PM Bug #16252 (Closed): Cant able to view the 8D HW form, It shows "Data cannot be found" error

Cant able to view the 8D HW form, It shows "Data cannot be found" error Rupa K

06:45 PM Bug #16251 (Open): Suite default module and Suite default pages in Administrator setting as a shipped suite admin is not navigating administrator (Created admin) user to the saved landing pages and menus

Smitha V

04:51 PM Bug #16251 (Closed): Suite default module and Suite default pages in Administrator setting as a shipped suite admin is not navigating administrator (Created admin) user to the saved landing pages and menus

Suite default module and Suite default pages in Administrator setting as a shipped suite admin is not navigating admi... Anonymous

06:45 PM Bug #16250 (Open): Pandora db -> Escalation emails are not generating from round 2 for Auditee Response to Non Conformances and Auditor Close Out the Audit

Smitha V

04:36 PM Bug #16250 (Closed): Pandora db -> Escalation emails are not generating from round 2 for Auditee Response to Non Conformances and Auditor Close Out the Audit

Pandora db -> Escalation emails are not generating from round 2 for Auditee Response to Non Conformances and Auditor ... Anonymous

06:45 PM Reports #16248 (Open): Threshold limits are showing wrongly in resource allocation report (SSRS Report)

Smitha V

04:08 PM Reports #16248 (Closed): Threshold limits are showing wrongly in resource allocation report (SSRS Report)

1.Threshold limits are showing wrongly in resource allocation report (SSRS Report)
2.Showing threshold hours indicat... Anonymous

06:45 PM Reports #16247 (Open): Project % completion in the listing screen is not matching with the % of Project completion displayed in reports

Smitha V

04:00 PM Reports #16247 (Closed): Project % completion in the listing screen is not matching with the % of Project completion displayed in reports

Project % completion is matched witht the % of Project completion displayed in reports Anonymous

06:45 PM Reports #16246 (Open): Based on the Site selection Projects are not listed in all the reports site dropdown.

Smitha V

03:35 PM Reports #16246 (Closed): Based on the Site selection Projects are not listed in all the reports site dropdown.

Based on the Site selection Projects are not listed in all the reports site dropdown. Anonymous

06:45 PM Bug #16245 (Open): Auditee Response Approaches -> All sub forms are displayed along with main forms and unable to view the data properly on those forms

Smitha V

03:26 PM Bug #16245 (Closed): Auditee Response Approaches -> All sub forms are displayed along with main forms and unable to view the data properly on those forms

Auditee Response Approaches -> All sub forms are displayed along with main forms and unable to view the data properly... Anonymous

06:45 PM Reports #16243 (Open): Budget Management- When the budget difference is less than 0 then it should show in red

Smitha V

03:07 PM Reports #16243 (Closed): Budget Management- When the budget difference is less than 0 then it should show in red

When the budget difference is less than 0 then it should show in red malini C

06:45 PM Reports #16242 (Open): Indicator should be meaningful- the on budget inidator should be in straight line.

Smitha V

03:03 PM Reports #16242 (Closed): Indicator should be meaningful- the on budget inidator should be in straight line.

Indicator should be meaningful( 100 should be in the center- values below in left and above should be in right side)
... malini C

06:45 PM Reports #16241 (Open): Budget Management- The budget amount got overlapped with the phase name. No Clarity

Smitha V

02:54 PM Reports #16241 (Closed): Budget Management- The budget amount got overlapped with the phase name. No Clarity

The budget amount got overlapped with the phase name. No Clarity malini C

06:45 PM Bug #16240 (Open): SP906.1(Internal) -> CAR Approach -> Proposed corrective action ->Date effective is not displayed after completed the audit

Smitha V

02:29 PM Bug #16240 (Closed): SP906.1(Internal) -> CAR Approach -> Proposed corrective action ->Date effective is not displayed after completed the audit

http://ew.omnex.in/EwQIMS_Inst3/
username :petob
Pwd: a1
Audit no: 2019-DEC-IATF_19-IATF_SA-SAQ4-11-7(Any nc... Anonymous

06:45 PM Bug #16239 (Open): Budget Management Report- The project listing dropdown is disabled when multi site is selected(Chennai)

Smitha V

02:18 PM Bug #16239 (Closed): Budget Management Report- The project listing dropdown is disabled when multi site is selected(Chennai)

The projects created in the chennai site is not listing when the site selected as "Chennai". It is showing up only wh... malini C

05:38 PM Bug #16198 (Resolved): Plant Configuration and Equipment: Activity-> CBM--> When tries to select the specification for CBM, it is not showing the criteria trigger value for saved activity. Again clicking and saving on same activity, it works as expected

While Adding activity, PM Rule will automatically saved as contionuous for CBM only Anonymous

04:54 PM Bug #16206 (Resolved): Social Media: Widgets-->Planned Maintenance--> After enabling the team option, the maintenance team field is not showing in the Planned maintenance detail screen

Anonymous

10:11 AM Bug #16206 (Open): Social Media: Widgets-->Planned Maintenance--> After enabling the team option, the maintenance team field is not showing in the Planned maintenance detail screen

User Admin

03:02 PM Bug #15689 (Not Fixed with Hotfix): Rename the link to view the reference attachment to " Click to View" or "Click" not to display the same label ( In Approval request/ Pending Request/ TOC ).

open in document managaement Anonymous

01:37 PM Bug #15689: Rename the link to view the reference attachment to " Click to View" or "Click" not to display the same label ( In Approval request/ Pending Request/ TOC ).

Closed in SP10.00 CY1 Ragavi Ram

01:36 PM Bug #15689 (Fixed with Hotfix): Rename the link to view the reference attachment to " Click to View" or "Click" not to display the same label ( In Approval request/ Pending Request/ TOC ).

Closed in SP10.00 CY1 Ragavi Ram

02:57 PM Bug #15906: Doc Pro: MSA-->Multi site-->User does not having the full access rights to view the Module(MSA pro)level.

Kiruthika G wrote:
> Issue 1: Doc Pro: MSA-->Multi site-->User does not having the full access rights to view the M... Anonymous

12:37 PM Bug #16200 (Resolved): Breakdown Work order Request: Equipment and Die Icon-->When tries to search and select the Equipment, it shows alert like "Start Of Production Date Is Greater Than Reported Date@"

Anonymous

11:27 AM Bug #16084 (Not Resolved): Audit form -> After completed all the fields also,it displays error as " you have been editing something,if leave without saving the data".We are able close the audit form tab, when alert throw as " please set business rule"

Still the issues in blank
user name and pwd
todd
a1
After completed all the fields also,it displays error a... Anonymous

11:26 AM Bug #16095 (Closed): Supplier flow-> Filter-> Error is displayed while selecting the Audit type in filter

Verified in cycle1 Anonymous

10:11 AM Bug #16218 (Open): Multi language issue list

User Admin

10:11 AM Bug #16217 (Open): Multi language issue list - Label, Chinese and spanish issue list. refer description and excel sheet

User Admin

10:11 AM Suggestion #16216 (Open): Reports: Need separate access rights for Reports in Group menu.

User Admin

10:11 AM Bug #16215 (Open): While adding user, clicking on show skill matrix icon throws below error. Whereas Skill matrix reports are configured and skills are also mapped for the respective user.

User Admin

10:11 AM Bug #16213 (Open): FireFox - Link PI pop is not fully displayed before clicking maximize button.

User Admin

10:11 AM Bug #16212 (Open): Receiving Inspection and Supervisor Approval Page is not displaying for user having Receiving Inspection Supervisor rights

User Admin

10:11 AM Bug #16211 (Open): Receiving Inspection Menu is not displaying for user having Receiving Inspection rights only in Group Menu

User Admin

10:11 AM Bug #16210 (Open): Dynamic Preliminary Architecture - Menus, Tool options and Tooltips are not good(Refer Description)

User Admin

10:11 AM Bug #16209 (Open): Operator is not listing in Inspection entry pop-up for user having Final Inspection rights only in group menu

User Admin

10:11 AM Bug #16207 (Open): V-Model - Diagram is not displayed Properly (Refer description)

User Admin

10:11 AM Bug #16205 (Open): Final Inspection Scheduling : Unable to schedule the same Part for multiple dates

User Admin

10:11 AM Bug #16204 (Open): Inspection parameters : UOM field is displaying as 1 after saving variable characteristics

User Admin

10:10 AM Bug #16214 (Open): Users having only In-process Inspection and In-process Supervisor rights are not working as expected

User Admin

09:37 AM Bug #16173 (In Progress): Interface Matrix - On double click on any cell,valuess not displayed

Anonymous

09:35 AM Bug #16208 (In Progress): Active Document header for State Transition Diagram is not good

Anonymous

09:35 AM Bug #16208 (Open): Active Document header for State Transition Diagram is not good

Anonymous

01:07 AM Bug #16189 (In Progress): Process VDA - FourM cannot be added directly

JS ERROR BECAUSE FOR $$ IN VDA.JS AND FIXED AND CHECK IN Anonymous

12:59 AM Bug #16163 (In Progress): Process VDA - While pressing Tab key system creates Duplicate segments automatically(Refer Description)

JS ERROR FIXED BECAUSE OF $$ IN VDA.JS FILE Anonymous

12:38 AM Bug #16192 (In Progress): Design VDA - IFM - Select Route dropdown is not working properly

Anonymous

12:08 AM Bug #16193: Percentage Allocation - Unable to add percentage allocation for step 7

because of the label having symbol "@" in the last of each word. 7th step result and document cant able to assign the... Anonymous

12:07 AM Bug #16193 (In Progress): Percentage Allocation - Unable to add percentage allocation for step 7

because of the label having symbol "@" in the last of each word. 7th step result and document cant able to assign the... Anonymous

04/15/2020

07:55 PM Bug #16076 (Not Resolved): Stability - When the least tolerance value of Gage as "0.0025", in stability study it shows the least tolerance value of "0".

Kiruthika G

07:53 PM Bug #16077 (Not Resolved): Groups--> Access rights--> without giving the rights for list of measurement is shown in the report tab

Kiruthika G

07:48 PM Bug #16218 (Closed): Multi language issue list

Multi language issue list. Few more issue updated in 16-04-2020 Kiruthika G

07:06 PM Bug #16217 (Closed): Multi language issue list - Label, Chinese and spanish issue list. refer description and excel sheet

Multi language issue list
*Open:*
2) Multi language - The subject of the Mail in Spanish is showing as EwIMS ... Kiruthika G

06:41 PM Suggestion #16216 (Closed): Reports: Need separate access rights for Reports in Group menu.

Reports: Need separate access rights for Reports in Group menu.
Need to show the Report list which is given below,... Kiruthika G

06:40 PM Bug #16215 (Closed): While adding user, clicking on show skill matrix icon throws below error. Whereas Skill matrix reports are configured and skills are also mapped for the respective user.

While adding user, clicking on show skill matrix icon throws below error. Whereas Skill matrix reports are configured... Anonymous

06:39 PM Bug #16214 (Closed): Users having only In-process Inspection and In-process Supervisor rights are not working as expected

Users having only In-process Inspection and In-process Supervisor rights are not working as expected
User having I... Anonymous

06:36 PM Suggestion #16070 (Closed): LPA : Approval process is need for adhoc schedule created with tentative status

Anonymous

06:34 PM Bug #16142 (In Progress): Process VDA - Functional/Failure Analysis - Master Table Icon and Close icon for Create and Map is not good.(Verified in Chrome Browser)

Anonymous

06:34 PM Bug #16169 (Resolved): User Preference - Not able change my layout setting from social media to EwQIMS theme

Raghu Ram

08:55 AM Bug #16169 (Open): User Preference - Not able change my layout setting from social media to EwQIMS theme

User Admin

06:33 PM Bug #16127 (Resolved): Result & Documentation - After doing any operation in any of the documents, system hangs for a long time.

Anonymous

06:32 PM Bug #16213 (Closed): FireFox - Link PI pop is not fully displayed before clicking maximize button.

FireFox - Link PI pop is not fully displayed before clicking maximize button. Anonymous

06:32 PM Bug #16075 (Closed): LPA : When Created Adhoc audit after LPA audit while Reschedule the Created adhoc audit schedules are not getting over riding and created schedule are not getting confirmed and publish button is not available.

Anonymous

06:31 PM Bug #16152 (Closed): Suite : Remember my ID on this computer check box in the Home screen is un checking after click on Login button

Verified in CY-1 Anonymous

06:23 PM Bug #16212 (Closed): Receiving Inspection and Supervisor Approval Page is not displaying for user having Receiving Inspection Supervisor rights

Receiving Inspection and Supervisor Approval Page is not displaying for user having Receiving Inspection Supervisor r... Anonymous

06:22 PM Bug #16136 (Closed): IN Document viewer the resource is allowed to attach additional document for the deliverable which is in "Waiver" and "Deactivate" status

Anonymous

06:22 PM Bug #16136 (Fixed with Hotfix): IN Document viewer the resource is allowed to attach additional document for the deliverable which is in "Waiver" and "Deactivate" status

Anonymous

06:22 PM Bug #16120 (Closed): Document Viewer Publish Not working

Anonymous

06:22 PM Bug #16120 (Fixed with Hotfix): Document Viewer Publish Not working

Anonymous

06:22 PM Bug #16112 (Closed): Not able to export the project to xml

Anonymous

06:22 PM Bug #16112 (Fixed with Hotfix): Not able to export the project to xml

Anonymous

06:22 PM Bug #16106 (Closed): EV AV recent fixes are not included in the first Build

Anonymous

06:22 PM Bug #16106 (Fixed with Hotfix): EV AV recent fixes are not included in the first Build

Anonymous

06:22 PM Bug #16072 (Closed): FST Linkage: Documents got mapped wrongly

Anonymous

06:22 PM Bug #16072 (Fixed with Hotfix): FST Linkage: Documents got mapped wrongly

Anonymous

06:20 PM Bug #16211 (Closed): Receiving Inspection Menu is not displaying for user having Receiving Inspection rights only in Group Menu

Receiving Inspection Menu is not displaying for user having Receiving Inspection rights only in Group Menu Anonymous

06:16 PM Bug #16083 (Closed): Main2: Clicking on Show Override/Change Levels its displaying "Null" Message

Anonymous

06:15 PM Bug #16086 (Closed): Main/Main2: Creating a New Format displays JS Error for the Initial Stage

Anonymous

06:15 PM Bug #16091 (Closed): Main2: Create DocPro Hyperlink and Create DocPro Image Hyperlink is not having the Borders

Anonymous

06:15 PM Bug #16210 (Closed): Dynamic Preliminary Architecture - Menus, Tool options and Tooltips are not good(Refer Description)

• Tools options are overlapped on each other
• Tooltips are commonly displayed on the Grid
Shankar Narayanan

06:14 PM Bug #16096 (Closed): Preferences New: Preferences New is not working and displaying Old Page

Anonymous

06:14 PM Bug #16097 (Closed): Security Definitions New: Security Definitions New is not working

Anonymous

06:12 PM Bug #16098 (Closed): Security Options New: Security Options New is not working

Anonymous

06:10 PM Bug #16100 (Closed): Main2: Bulk Publish is not working

Anonymous

06:10 PM Bug #16209 (Closed): Operator is not listing in Inspection entry pop-up for user having Final Inspection rights only in group menu

Operator is not listing in Inspection entry pop-up for user having Final Inspection rights only in group menu Anonymous

06:09 PM Bug #16101 (Closed): Main2: PI Publish is not working

Anonymous

06:08 PM Bug #16103 (Closed): Main2: Process Flow Information/Work Instructions is not working (Inside Document)

Anonymous

06:07 PM Bug #16104 (Closed): Main2: Process Flow Information/Work Instructions Publish not working (Inside Document)

Anonymous

06:06 PM Bug #16208 (Closed): Active Document header for State Transition Diagram is not good

Active Document header for State Transition Diagram is not good Shankar Narayanan

06:05 PM Bug #16121 (Closed): Main2: Can't able to Add the Other Formats Documents using Add or Add from Other option on the Format Icon

Anonymous

06:03 PM Bug #16122 (Closed): Main2: Format Change is not working as expected found an unexpected behaviour

Anonymous

06:02 PM Bug #16123 (Closed): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

Anonymous

06:01 PM Bug #16124 (Closed): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

Anonymous

05:53 PM Bug #16207 (Closed): V-Model - Diagram is not displayed Properly (Refer description)

• Focus element name is not displayed in the Starter box.
• Component elements are not displayed Shankar Narayanan

05:50 PM Bug #16206 (Closed): Social Media: Widgets-->Planned Maintenance--> After enabling the team option, the maintenance team field is not showing in the Planned maintenance detail screen

Social Media: Widgets-->Planned Maintenance--> After enabling the team option, the maintenance team field is not show... Kiruthika G

05:24 PM Bug #16205 (Closed): Final Inspection Scheduling : Unable to schedule the same Part for multiple dates

Final Inspection Scheduling : Unable to schedule the same Part for multiple dates Anonymous

05:19 PM Bug #16204 (Closed): Inspection parameters : UOM field is displaying as 1 after saving variable characteristics

Inspection parameters : UOM field is displaying as 1 after saving variable characteristics Anonymous

04:57 PM Bug #16203 (Open): VAM&VEM audit-First time scheduled audit not reflecting in perform audit page.Updating the same audit able to see in perform audit page

User Admin

04:48 PM Bug #16203 (Closed): VAM&VEM audit-First time scheduled audit not reflecting in perform audit page.Updating the same audit able to see in perform audit page

VAM&VEM audit-First time scheduled audit not reflecting in perform audit page.Updating the same audit able to see in ... Saradha Balan

04:57 PM Bug #16202 (Open): The project manager is allowed to upload additional document for a Phase via document viewer

User Admin

04:43 PM Bug #16202 (Closed): The project manager is allowed to upload additional document for a Phase via document viewer

The project manager is allowed to upload additional document for a Phase via document viewer malini C

04:57 PM Bug #16201 (Open): Draft to Document - Not able to view the converted document in the TOC - For the converted document the rights has not set

User Admin

04:33 PM Bug #16201 (Closed): Draft to Document - Not able to view the converted document in the TOC - For the converted document the rights has not set

Draft to Document - Not able to view the converted document in the TOC - For the converted document the rights has no... Ragavi Ram

04:57 PM Bug #16200 (Open): Breakdown Work order Request: Equipment and Die Icon-->When tries to search and select the Equipment, it shows alert like "Start Of Production Date Is Greater Than Reported Date@"

User Admin

04:24 PM Bug #16200 (Closed): Breakdown Work order Request: Equipment and Die Icon-->When tries to search and select the Equipment, it shows alert like "Start Of Production Date Is Greater Than Reported Date@"

Issue 1: Breakdown Work order Request: Equipment Icon-->When tries to search and select the Equipment, it shows alert... Kiruthika G

04:43 PM Bug #16004 (Closed): Draft requests needing viewing: Change request button is not displayed for the requester if all the draft viewers are removed. Whenever a draft viewer is removed, the change request button is not displayed for other draft viewers even if all are commented

Ragavi Ram

04:42 PM Bug #16006 (Closed): New doc draft:No Alert message when requesting a draft w/o selecting level or w/o entering doc number and name

Ragavi Ram

04:42 PM Bug #16110 (Closed): Convert draft to a document-> When tried to convert a draft to a document, it keeps on loading. But when refreshed and checked, its already converted to document

Ragavi Ram

04:42 PM Bug #16111 (Closed): Document->Request details->Spelling of Reference is wrong. Also in Approver's pending request screen

Ragavi Ram

04:40 PM Bug #16119 (Closed): Draft to document conversion-> When a draft is converted to document, the icon to add the Draft viewers is displayed in Draft details link in Document. It is possible to add draft viewers.

Ragavi Ram

04:13 PM Bug #16199 (Open): Interface Matrix - After double clicking on one cell and clicking on other cell, system does not allow to enter the values again

User Admin

04:12 PM Bug #16199 (Closed): Interface Matrix - After double clicking on one cell and clicking on other cell, system does not allow to enter the values again

After double clicking on one cell and clicking on other cell, system does not allow to enter the values again Shankar Narayanan

04:13 PM Bug #16198 (Open): Plant Configuration and Equipment: Activity-> CBM--> When tries to select the specification for CBM, it is not showing the criteria trigger value for saved activity. Again clicking and saving on same activity, it works as expected

User Admin

04:10 PM Bug #16198 (Closed): Plant Configuration and Equipment: Activity-> CBM--> When tries to select the specification for CBM, it is not showing the criteria trigger value for saved activity. Again clicking and saving on same activity, it works as expected

Plant Configuration and Equipment: Activity-> CBM--> When tries to select the specification for CBM, it is not showin... Kiruthika G

04:13 PM Bug #16197 (Open): Cannot able to view the Published ECR form. Showing Error "Please contact Administrator or Technical Support with this Id: e496b655-4a67-4074-9e1f-26c8f8c22f31 There is no file content assocated with this document"

User Admin

04:08 PM Bug #16197 (Closed): Cannot able to view the Published ECR form. Showing Error "Please contact Administrator or Technical Support with this Id: e496b655-4a67-4074-9e1f-26c8f8c22f31 There is no file content assocated with this document"

Cannot able to view the Published ECR form.
"Please contact Administrator or Technical Support with this Id: e496b... Anonymous

04:13 PM Bug #16196 (Open): LPA : Object error displays while changing the selected team in Mozilla browser

User Admin

03:46 PM Bug #16196 (Closed): LPA : Object error displays while changing the selected team in Mozilla browser

Object error displays while changing the selected team in Mozilla browser Anonymous

04:13 PM Bug #16195 (Open): LPA : Auditee response -> Team which is selected in Approval window is not listing once after the concern form is opened

User Admin

03:36 PM Bug #16195 (Closed): LPA : Auditee response -> Team which is selected in Approval window is not listing once after the concern form is opened

Auditee response -> Team which is selected in Approval window is not listing once after the concern form is opened Anonymous

04:13 PM Bug #16194 (Open): Interface Matrix: Alignment of the value and description is not proper while clicking on the value box in interface matrix

User Admin

03:35 PM Bug #16194 (Closed): Interface Matrix: Alignment of the value and description is not proper while clicking on the value box in interface matrix

Alignment of the value and description is not proper while clicking on the value box in interface matrix
Refer Scr... Anonymous

04:13 PM Bug #16193 (Open): Percentage Allocation - Unable to add percentage allocation for step 7

User Admin

03:34 PM Bug #16193 (Closed): Percentage Allocation - Unable to add percentage allocation for step 7

Issue occurs even for Process VDA. System does not respond when clicking on Step 7 Shankar Narayanan

04:13 PM Bug #16192 (Open): Design VDA - IFM - Select Route dropdown is not working properly

User Admin

03:30 PM Bug #16192 (Closed): Design VDA - IFM - Select Route dropdown is not working properly

After clicking on the any option in the publish Popup, Select Route dropdown is not working properly Shankar Narayanan

04:13 PM Bug #16191 (Open): Primary address check box is automatically unchecked in location address adding screen

User Admin

03:28 PM Bug #16191 (Closed): Primary address check box is automatically unchecked in location address adding screen

Primary address check box is automatically unchecked in location address adding screen Saradha Balan

04:13 PM Bug #16190 (Open): LPA : History of LPA audits is displaying all the Sub hyperlinks for which auditee is not filled

User Admin

03:27 PM Bug #16190 (Closed): LPA : History of LPA audits is displaying all the Sub hyperlinks for which auditee is not filled

History of LPA audits is displaying all the Sub hyperlinks for which auditee is not filled.And Auditor can able to se... Anonymous

04:13 PM Bug #16189 (Open): Process VDA - FourM cannot be added directly

User Admin

03:25 PM Bug #16189 (Closed): Process VDA - FourM cannot be added directly

After creating FOurM and pressing Tab key, system does not respond. But after refresh, added FourM is listed in the m... Shankar Narayanan

04:13 PM Bug #16188 (Open): Sporadic issue-While adding production item "Please select plant name" alert is getting displayed even plant name has selected already

User Admin

03:23 PM Bug #16188 (Closed): Sporadic issue-While adding production item "Please select plant name" alert is getting displayed even plant name has selected already

Sporadic issue-While adding production item "Please select plant name" alert is getting displayed even plant name ha... Saradha Balan

04:13 PM Bug #16187 (Open): LPA : Action management is not displaying any record though it is available

User Admin

03:19 PM Bug #16187 (Closed): LPA : Action management is not displaying any record though it is available

Action management is not displaying any record though it is available Anonymous

04:13 PM Bug #16186 (Open): Item Boundaries: When clicking on select context element in Item Boundaries, system throws object Error box.

User Admin

03:00 PM Bug #16186 (Closed): Item Boundaries: When clicking on select context element in Item Boundaries, system throws object Error box.

When clicking on select context element in Item Boundaries, system throws object Error box.
Refer Screenshot Anonymous

04:13 PM Bug #16185 (Open): Block Diagram:Parent PI name is not displayed on the outer blue box of the block diagram

User Admin

02:37 PM Bug #16185 (Closed): Block Diagram:Parent PI name is not displayed on the outer blue box of the block diagram

Block Diagram: PI is not displayed on the outer box of the block diagram
Refer Screen shot Anonymous

04:13 PM Bug #16184 (Open): EFC Tree: when flow down has done in EFC tree, only after refreshing it displays the diagram.

User Admin

01:46 PM Bug #16184 (Closed): EFC Tree: when flow down has done in EFC tree, only after refreshing it displays the diagram.

when flow down has done in EFC tree, only after refreshing it displays the diagram. Anonymous

04:13 PM Bug #16183 (Open): When the Project view access menu is enabled in Supplier Management group for the user then it is not showing the project and programs menu with view access instead it showing the Audit menu items as referred in screenshot.

User Admin

01:23 PM Bug #16183 (Closed): When the Project view access menu is enabled in Supplier Management group for the user then it is not showing the project and programs menu with view access instead it showing the Audit menu items as referred in screenshot.

When the Project view access menu is enabled in Supplier Management group for the user then it is not showing the pro... Anonymous

04:13 PM Bug #16182 (Open): When the Scope/Goal/Deliverable element is added in between the attachment then the project charter is not loading.

User Admin

01:18 PM Bug #16182 (Closed): When the Scope/Goal/Deliverable element is added in between the attachment then the project charter is not loading.

When the Scope/Goal/Deliverable element is added in between the attachment then the project charter is not loading.
... Anonymous

04:13 PM Bug #16181 (Open): Initiate concern icon is not listed in the context menu for the resource in Mydeliverable list

User Admin

01:16 PM Bug #16181 (Closed): Initiate concern icon is not listed in the context menu for the resource in Mydeliverable list

Anonymous

04:08 PM Bug #16125 (Closed): Route-> When trying to create an ITAR route by a Non ITAR admin, it is displayed as a Non ITAR route in Edit route mode

Ragavi Ram

04:02 PM Bug #16138 (Closed): Tag Search - The page keeps loading . Not able to proceed further

Ragavi Ram

03:54 PM Bug #16158 (Closed): Multi-Site : Operator Menu : Users are not displayed in Inspector Pop-up

Closed in Cycle 1 Anonymous

03:53 PM Bug #16157 (Closed): Production Scheduling : Production Date pop-up is not displaying the selected dates

Closed in Cycle 1 Anonymous

03:53 PM Bug #16156 (Closed): In-process Inspection Sheet : Sample values are not getting saved

Closed in Cycle 1 Anonymous

03:52 PM Bug #16155 (Closed): Operator : Saved data is not listing in the grid

Closed in Cycle 1 Anonymous

03:52 PM Bug #16132 (Closed): Multi-Site : Part Equipment Mapping Page is not opening

Closed in Cycle 1 Anonymous

03:52 PM Bug #16139 (Not Fixed with Hotfix): New Document Request: Multiple document Drag and Drop - PNG file gets duplicated and showing Alert after uploading . In TOC the document displays the blank name

It replicating in my machine . Have to cross check this issue Ragavi Ram

03:52 PM Bug #16131 (Closed): Multi-Site : Inspector/Operator details are not listed in the Inspection entry Popup

Closed in Cycle 1 Anonymous

03:52 PM Bug #16130 (Closed): Multi-Operation : In-process Inspection sheet is not loading

Closed in Cycle 1 Anonymous

03:51 PM Bug #16129 (Closed): Receiving/Final/Inprocess Inspeciton : Layout is getting changed while clicking on the breadcrumb(Receiving/Final/Inprocess) in the Inspection sheet page

Closed in Cycle 1 Anonymous

03:51 PM Bug #16128 (Closed): In-process Inspection sheet is not opening while entering lot number and clicking submit for the first time

Closed in Cycle 1 Anonymous

03:51 PM Bug #16114 (Closed): Inspection Parameters : Characteristics column header section is getting duplicated on adding a new characteristic / Perform refresh operation

Closed in Cycle 1 Anonymous

03:50 PM Bug #16113 (Closed): Inspection Parameters : Few columns are displayed with THLIC in Characteristics grid

Closed in Cycle 1 Anonymous

08:55 AM Bug #16179 (Open): Suite : Multi language Label issues without ### tag or @ symbol

User Admin

08:55 AM Bug #16178 (Open): Draft Commenting - Pending Document draft - On Drag and Dropping attachments not able to write the comment.

User Admin

08:55 AM Bug #16177 (Open): Multi language - View the description

User Admin

08:55 AM Bug #16176 (Open): Following Issues occurs due Special Character symbol (@)(Refer Description and Attachment)

User Admin

08:55 AM Bug #16175 (Open): Percentage Allocation - Alignment is not good

User Admin

08:55 AM Bug #16174 (Open): HARA - Alignment is not good

User Admin

08:55 AM Bug #16173 (Open): Interface Matrix - On double click on any cell,valuess not displayed

User Admin

08:55 AM Bug #16172 (Open): Label conversion issues attached as a document.pls find

User Admin

08:55 AM Bug #16171 (Open): VAM audit-NC/OFI upload->NC/OFI category (NC minor,NC major) displaying multiple times in drop down

User Admin

08:55 AM Bug #16170 (Open): Supplier contact social media login-Unable to publish any of the CAR forms,On clicking submit button no actions.

User Admin

08:55 AM Bug #16168 (Open): Business Unit-Unable to create new business unit following alert is getting displayed "Please follow custom function syntax"

User Admin

08:55 AM Bug #16167 (Open): Groups-REports-First menu is showing blank.Refer screen shot

User Admin

08:55 AM Bug #16166 (Open): Setup--> Assign department menu is not showing in the MSA setup tab

User Admin

04/14/2020

11:22 AM Bug #16152 (Resolved): Suite : Remember my ID on this computer check box in the Home screen is un checking after click on Login button

Raghu Ram

11:21 AM Bug #16169: User Preference - Not able change my layout setting from social media to EwQIMS theme

Issue Fixed and patches moved to build Raghu Ram

10:53 AM Bug #16068 (Resolved): LPA : There is no differentiate between confirm/not confirm status for normal LPA schedule and Adhoc audit schedule.

Biju, As Discussed in meeting kindly close this issue Nikhil d

08:39 AM Bug #16179 (Closed): Suite : Multi language Label issues without ### tag or @ symbol

Multi language Label issues without ### tag
Sno Issue Remarks

0 Wrong Username / Password. Try again.content n... Anonymous

04/13/2020

10:43 PM Bug #16170: Supplier contact social media login-Unable to publish any of the CAR forms,On clicking submit button no actions.

Duplicate Issue of Auditee Response Publish. Kindly Change the status Nikhil d

03:19 PM Bug #16170 (Closed): Supplier contact social media login-Unable to publish any of the CAR forms,On clicking submit button no actions.

Supplier contact social media login-Unable to publish any of the CAR forms,On clicking submit button no actions. Saradha Balan

08:00 PM Bug #16115: Getting error while Publishing Inspection sheet

Inspection Form Std : Unable to add attachments from Local machine and Docpro. Attachment not getting saved Anonymous

07:49 PM Bug #16178 (Closed): Draft Commenting - Pending Document draft - On Drag and Dropping attachments not able to write the comment.

Draft Commenting - Pending Document draft - On Drag and Dropping attachments not able to write the comment. Ragavi Ram

07:41 PM Bug #16177 (Closed): Multi language - View the description

1. Routes - Is Route
2.New Document Draft - Viewers ( user pop up ) - ITAR Status label converted Ragavi Ram

05:55 PM Bug #16176 (Closed): Following Issues occurs due Special Character symbol (@)(Refer Description and Attachment)

Functional/Failure Analysis - Alignment for header is not good. Refer attachment for more issues Shankar Narayanan

05:45 PM Bug #16175 (Closed): Percentage Allocation - Alignment is not good

7th step is displayed below the 1st step Shankar Narayanan

05:43 PM Bug #16174 (Closed): HARA - Alignment is not good

Alignment is not good Shankar Narayanan

05:38 PM Bug #16074 (Closed): Suite : While creating new process duplicate process are getting created 2 times higher than the created process

Anonymous

05:37 PM Bug #16085 (Closed): Suite : In Process/Activities screen while copying the Process Displays Object Error

Anonymous

05:37 PM Bug #16151 (Closed): Suite : In Assign Department page ->Selected position is not visible after users are selected.

Anonymous

02:03 PM Bug #16151 (Resolved): Suite : In Assign Department page ->Selected position is not visible after users are selected.

Raghu Ram

05:36 PM Bug #16154 (Closed): Suite : Supplier add part button is available only after providing Supplier portal access to user

Anonymous

12:46 PM Bug #16154 (Resolved): Suite : Supplier add part button is available only after providing Supplier portal access to user

Prabhu P

05:35 PM Bug #16173 (Closed): Interface Matrix - On double click on any cell,valuess not displayed

Issue occurs in FST alone Shankar Narayanan

03:53 PM Bug #16172 (Closed): Label conversion issues attached as a document.pls find

Label conversion issues attached as a document.pls find Saradha Balan

03:40 PM Bug #16171 (Closed): VAM audit-NC/OFI upload->NC/OFI category (NC minor,NC major) displaying multiple times in drop down

VAM audit-NC/OFI upload->NC/OFI category (NC minor,NC major) displaying multiple times in drop down Saradha Balan

02:45 PM Bug #16135 (Resolved): In New concern creation page shows error

Radha Krishnan S

02:45 PM Bug #16169 (Closed): User Preference - Not able change my layout setting from social media to EwQIMS theme

User Preference - Not able change my layout setting from social media to EwQIMS theme Ragavi Ram

02:24 PM Bug #16168 (Closed): Business Unit-Unable to create new business unit following alert is getting displayed "Please follow custom function syntax"

Business Unit-Unable to create new business unit following alert is getting displayed "Please follow custom function ... Saradha Balan

02:20 PM Bug #16129 (Fixed with Hotfix): Receiving/Final/Inprocess Inspeciton : Layout is getting changed while clicking on the breadcrumb(Receiving/Final/Inprocess) in the Inspection sheet page

Anonymous

02:20 PM Bug #16167 (Closed): Groups-REports-First menu is showing blank.Refer screen shot

Groups-REports-First menu is showing blank.Refer screen shot Saradha Balan

01:12 PM Bug #16107 (Closed): Route-> The default route 'Module Auto approval' is not displayed and a blank screen is displayed. When tried to create a new route also, a blank screen is displayed.

Ragavi Ram

01:12 PM Bug #16108 (Closed): New Document Request-> When clicked on New Document Request menu, an error occureed as shown in Screen shot

Ragavi Ram

01:11 PM Bug #16109 (Closed): New Document Draft-> When clicked on New Document Draft also, an error occurred

Ragavi Ram

01:08 PM Bug #16077 (Resolved): Groups--> Access rights--> without giving the rights for list of measurement is shown in the report tab

Prabhu P

01:06 PM Bug #16076 (Resolved): Stability - When the least tolerance value of Gage as "0.0025", in stability study it shows the least tolerance value of "0".

Prabhu P

01:06 PM Bug #16164 (Resolved): Unable to schedule VEM audit for Commodity if supplier have Parts as well as commodities in

Prabhu P

08:45 AM Bug #16164 (Open): Unable to schedule VEM audit for Commodity if supplier have Parts as well as commodities in

User Admin

12:49 PM Bug #16166 (Closed): Setup--> Assign department menu is not showing in the MSA setup tab

Setup--> Assign department menu is not showing in the MSA setup tab
Kiruthika G

12:10 PM Bug #16165 (Resolved): Unable to do auditee response for any CAR approach for VEM audit - Data not found displaying in CAR loading page

Issue Resolved By PS Team Nikhil d

08:45 AM Bug #16165 (Open): Unable to do auditee response for any CAR approach for VEM audit - Data not found displaying in CAR loading page

User Admin

11:59 AM Bug #16142 (Not Fixed with Hotfix): Process VDA - Functional/Failure Analysis - Master Table Icon and Close icon for Create and Map is not good.(Verified in Chrome Browser)

Shankar Narayanan

11:11 AM Bug #16142 (Resolved): Process VDA - Functional/Failure Analysis - Master Table Icon and Close icon for Create and Map is not good.(Verified in Chrome Browser)

Reng Raj

11:59 AM Bug #16143 (Closed): Item Definition - All the menus in Item definition tab in RFD displays THL

Shankar Narayanan

11:28 AM Bug #16141 (Closed): Process VDA - Structure Analysis - FourM is not created properly while creating from FourM category.(Refer Description)

Shankar Narayanan

11:10 AM Bug #16141 (Resolved): Process VDA - Structure Analysis - FourM is not created properly while creating from FourM category.(Refer Description)

Reng Raj

11:21 AM Bug #16093 (Closed): Result & Documentation - No Alert message is displayed while clicking on Save button

Shankar Narayanan

11:19 AM Bug #16092 (Closed): Interface Function Matrix - Publish for Approval is not working in IFM

Shankar Narayanan

11:17 AM Bug #16089 (Closed): Block Diagram - Save button is placed wrongly after Add/Remove elements

Shankar Narayanan

11:16 AM Bug #16079 (Closed): Format Dropdown - Label for Format Dropdown displays THL

Shankar Narayanan

11:14 AM Bug #16090 (Closed): (Chrome Browser) After creating a new Format, system hangs

Shankar Narayanan

11:13 AM Bug #16088 (Closed): (Chrome Browser) 7th AP - Add from other option is not responding

Shankar Narayanan

04/11/2020

12:36 PM Bug #16143 (Resolved): Item Definition - All the menus in Item definition tab in RFD displays THL

issues fixed and moved to TFS but not in the build Anonymous

12:21 AM Bug #16005 (Resolved): Comments in Pending doc drafts: Cant see the likes form pending drafts wheras it can be seen from draft requests needing viewing(In all screens where draft details are shown)

Jacqueline Antonette

12:21 AM Bug #16138 (Resolved): Tag Search - The page keeps loading . Not able to proceed further

Jacqueline Antonette

04/10/2020

10:14 PM Bug #16165 (Closed): Unable to do auditee response for any CAR approach for VEM audit - Data not found displaying in CAR loading page

Unable to do auditee response for any CAR approach for VEM audit - Data not found displaying in CAR loading page Saradha Balan

10:12 PM Bug #16164 (Closed): Unable to schedule VEM audit for Commodity if supplier have Parts as well as commodities in

Unable to schedule VEM audit for Commodity if supplier have Parts as well as commodities in Saradha Balan

05:53 PM Bug #16163 (Open): Process VDA - While pressing Tab key system creates Duplicate segments automatically(Refer Description)

User Admin

05:53 PM Bug #16159 (Open): When Automatic task completion on approval enabled only in PPAP then the tasks under APQP projects gets completed automatically if approval is set

User Admin

05:53 PM Bug #16154 (Open): Suite : Supplier add part button is available only after providing Supplier portal access to user

User Admin

05:53 PM Bug #16152 (Open): Suite : Remember my ID on this computer check box in the Home screen is un checking after click on Login button

User Admin

05:53 PM Bug #16151 (Open): Suite : In Assign Department page ->Selected position is not visible after users are selected.

User Admin

05:53 PM Bug #16147 (Open): Calibration Verification->Calibration date- Calibration Date field allow to pick future date.

User Admin

05:53 PM Bug #16146 (Open): External lab calibration->Date of calibration- Date of Calibration field allow to pick future date.

User Admin

05:53 PM Bug #16145 (Open): Master->Inhouse->linearity--When tries to verify the last study date in gage screen after complete the study the date is not updated

User Admin

05:53 PM Bug #16144 (Open): Stability( Gage_Var_Inhouse)-Received date field doesnot shows current date.This field is empty.After clicking save menu it shows current date

User Admin

05:53 PM Bug #16143 (Open): Item Definition - All the menus in Item definition tab in RFD displays THL

User Admin

05:53 PM Bug #16142 (Open): Process VDA - Functional/Failure Analysis - Master Table Icon and Close icon for Create and Map is not good.(Verified in Chrome Browser)

User Admin

05:53 PM Bug #16141 (Open): Process VDA - Structure Analysis - FourM is not created properly while creating from FourM category.(Refer Description)

User Admin

05:53 PM Bug #16138 (Open): Tag Search - The page keeps loading . Not able to proceed further

User Admin

05:53 PM Bug #16135 (Open): In New concern creation page shows error

User Admin

04/09/2020

08:35 PM Bug #16163 (Closed): Process VDA - While pressing Tab key system creates Duplicate segments automatically(Refer Description)

After entering Data and pressing Tab Key system does not respond. And then clicking OK button, System displays the Se... Shankar Narayanan

06:16 PM Bug #16159 (Closed): When Automatic task completion on approval enabled only in PPAP then the tasks under APQP projects gets completed automatically if approval is set

When Automatic task completion on approval enabled only in PPAP then the tasks under APQP projects gets completed aut... malini C

05:43 PM Bug #16158 (Fixed with Hotfix): Multi-Site : Operator Menu : Users are not displayed in Inspector Pop-up

Anonymous

05:41 PM Bug #16158 (Resolved): Multi-Site : Operator Menu : Users are not displayed in Inspector Pop-up

Anonymous

05:40 PM Bug #16158 (Open): Multi-Site : Operator Menu : Users are not displayed in Inspector Pop-up

Due to VAPT Anonymous

04:07 PM Bug #16158 (Closed): Multi-Site : Operator Menu : Users are not displayed in Inspector Pop-up

Multi-Site : Operator Menu : Users are not displayed in Inspector Pop-up Anonymous

05:43 PM Bug #16157 (Fixed with Hotfix): Production Scheduling : Production Date pop-up is not displaying the selected dates

Anonymous

05:41 PM Bug #16157 (Resolved): Production Scheduling : Production Date pop-up is not displaying the selected dates

Anonymous

05:40 PM Bug #16157 (Open): Production Scheduling : Production Date pop-up is not displaying the selected dates

Due to VAPT Anonymous

03:42 PM Bug #16157 (Closed): Production Scheduling : Production Date pop-up is not displaying the selected dates

Production Scheduling : Production Date pop-up is not displaying the selected dates Anonymous

05:43 PM Bug #16156 (Fixed with Hotfix): In-process Inspection Sheet : Sample values are not getting saved

Anonymous

05:41 PM Bug #16156 (Resolved): In-process Inspection Sheet : Sample values are not getting saved

Anonymous

05:40 PM Bug #16156 (Open): In-process Inspection Sheet : Sample values are not getting saved

Due to VAPT Anonymous

02:39 PM Bug #16156 (Closed): In-process Inspection Sheet : Sample values are not getting saved

In-process Inspection Sheet : Sample values are not getting saved Anonymous

04:33 PM Bug #16155: Operator : Saved data is not listing in the grid

VAPT Anonymous

03:39 PM Bug #16155 (Fixed with Hotfix): Operator : Saved data is not listing in the grid

Anonymous

02:47 PM Bug #16155 (Resolved): Operator : Saved data is not listing in the grid

Anonymous

02:47 PM Bug #16155 (Open): Operator : Saved data is not listing in the grid

Anonymous

02:21 PM Bug #16155 (Closed): Operator : Saved data is not listing in the grid

Operator : Saved data is not listing in the grid Anonymous

04:26 PM Bug #16130 (Fixed with Hotfix): Multi-Operation : In-process Inspection sheet is not loading

Anonymous

04:11 PM Bug #16132 (Fixed with Hotfix): Multi-Site : Part Equipment Mapping Page is not opening

Anonymous

04:11 PM Bug #16131 (Fixed with Hotfix): Multi-Site : Inspector/Operator details are not listed in the Inspection entry Popup

Anonymous

02:25 PM Bug #16128 (Fixed with Hotfix): In-process Inspection sheet is not opening while entering lot number and clicking submit for the first time

Anonymous

02:24 PM Bug #16114 (Fixed with Hotfix): Inspection Parameters : Characteristics column header section is getting duplicated on adding a new characteristic / Perform refresh operation

Anonymous

02:24 PM Bug #16113 (Fixed with Hotfix): Inspection Parameters : Few columns are displayed with THLIC in Characteristics grid

Anonymous

02:10 PM Bug #16154 (Closed): Suite : Supplier add part button is available only after providing Supplier portal access to user

Supplier add part button is available only after providing Supplier portal access to user Anonymous

02:03 PM Bug #16152 (Closed): Suite : Remember my ID on this computer check box in the Home screen is un checking after click on Login button

Remember my ID on this computer check box in the Home screen is un checking after click on Login button but system ... Anonymous

01:57 PM Bug #16151 (Closed): Suite : In Assign Department page ->Selected position is not visible after users are selected.

In Assign Department page ->Selected position is not visible after users are selected. Anonymous

01:44 PM Bug #16139 (Fixed with Hotfix): New Document Request: Multiple document Drag and Drop - PNG file gets duplicated and showing Alert after uploading . In TOC the document displays the blank name

Ragavi Ram

01:43 PM Bug #16004 (Fixed with Hotfix): Draft requests needing viewing: Change request button is not displayed for the requester if all the draft viewers are removed. Whenever a draft viewer is removed, the change request button is not displayed for other draft viewers even if all are commented

Ragavi Ram

01:34 PM Bug #16006 (Fixed with Hotfix): New doc draft:No Alert message when requesting a draft w/o selecting level or w/o entering doc number and name

Ragavi Ram

01:32 PM Bug #16111 (Fixed with Hotfix): Document->Request details->Spelling of Reference is wrong. Also in Approver's pending request screen

Ragavi Ram

01:30 PM Bug #16119 (Fixed with Hotfix): Draft to document conversion-> When a draft is converted to document, the icon to add the Draft viewers is displayed in Draft details link in Document. It is possible to add draft viewers.

Ragavi Ram

12:33 PM Bug #16125 (Fixed with Hotfix): Route-> When trying to create an ITAR route by a Non ITAR admin, it is displayed as a Non ITAR route in Edit route mode

Ragavi Ram

04/08/2020

06:52 PM Bug #16147 (Closed): Calibration Verification->Calibration date- Calibration Date field allow to pick future date.

Calibration Verification->Calibration date- Calibration Date field allow to pick future date. Kiruthika G

06:50 PM Bug #16146 (Closed): External lab calibration->Date of calibration- Date of Calibration field allow to pick future date.

External lab calibration->Date of calibration- Date of Calibration field allow to pick future date. Kiruthika G

06:48 PM Bug #16145 (Closed): Master->Inhouse->linearity--When tries to verify the last study date in gage screen after complete the study the date is not updated

Master->Inhouse->linearity--When tries to verify the last study date in gage screen after complete the study the date... Kiruthika G

06:31 PM Bug #16144 (Closed): Stability( Gage_Var_Inhouse)-Received date field doesnot shows current date.This field is empty.After clicking save menu it shows current date

Stability( Gage_Var_Inhouse)-Received date field doesnot shows current date.This field is empty.After clicking save m... Kiruthika G

06:08 PM Bug #16093 (Resolved): Result & Documentation - No Alert message is displayed while clicking on Save button

Anonymous

06:06 PM Bug #16092 (Resolved): Interface Function Matrix - Publish for Approval is not working in IFM

Anonymous

05:26 PM Bug #16143 (Closed): Item Definition - All the menus in Item definition tab in RFD displays THL

All the menus in Item definition tab in RFD displays THL Shankar Narayanan

04:03 PM Bug #16090 (Fixed with Hotfix): (Chrome Browser) After creating a new Format, system hangs

Shankar Narayanan

04:02 PM Bug #16088 (Fixed with Hotfix): (Chrome Browser) 7th AP - Add from other option is not responding

Shankar Narayanan

04:01 PM Bug #16089 (Fixed with Hotfix): Block Diagram - Save button is placed wrongly after Add/Remove elements

Shankar Narayanan

03:08 PM Bug #16089 (Resolved): Block Diagram - Save button is placed wrongly after Add/Remove elements

Reng Raj

03:54 PM Bug #16142 (Closed): Process VDA - Functional/Failure Analysis - Master Table Icon and Close icon for Create and Map is not good.(Verified in Chrome Browser)

Master Table Icon and Close icon for Create and Map is not good.
• Master table icon issue is already a Known issu... Shankar Narayanan

03:35 PM Bug #16141 (Closed): Process VDA - Structure Analysis - FourM is not created properly while creating from FourM category.(Refer Description)

• After creating FourM from FourM Category and Clicking Done button, system does not respond.
• In Functional Ana... Shankar Narayanan

03:08 PM Bug #16079 (Resolved): Format Dropdown - Label for Format Dropdown displays THL

Reng Raj

03:08 PM Bug #16139 (Resolved): New Document Request: Multiple document Drag and Drop - PNG file gets duplicated and showing Alert after uploading . In TOC the document displays the blank name

Jacqueline Antonette

03:08 PM Bug #16139 (Open): New Document Request: Multiple document Drag and Drop - PNG file gets duplicated and showing Alert after uploading . In TOC the document displays the blank name

Jacqueline Antonette

01:14 PM Bug #16139 (Closed): New Document Request: Multiple document Drag and Drop - PNG file gets duplicated and showing Alert after uploading . In TOC the document displays the blank name

New Document Request: Multiple document Drag and Drop - PNG file gets duplicated and showing Alert after uploading . ... Ragavi Ram

02:56 PM Bug #16097 (Fixed with Hotfix): Security Definitions New: Security Definitions New is not working

Anonymous

02:49 PM Bug #16097 (Resolved): Security Definitions New: Security Definitions New is not working

identified this case which was path issue fixed and applied in server and updated in TFS Iyappan hariharan

02:06 PM Bug #16097 (Not Fixed with Hotfix): Security Definitions New: Security Definitions New is not working

Its not displaying the Formats and Container Items for the Corporate Site and if we selected either User or Groups it... Anonymous

02:51 PM Bug #16136 (Open): IN Document viewer the resource is allowed to attach additional document for the deliverable which is in "Waiver" and "Deactivate" status

User Admin

12:05 PM Bug #16136 (Closed): IN Document viewer the resource is allowed to attach additional document for the deliverable which is in "Waiver" and "Deactivate" status

IN Document viewer the resource is allowed to attach additional document for the deliverable which is in "Waiver" and... malini C

02:19 PM Bug #16082 (Fixed with Hotfix): Main/Main2: Clicking on the Reconcile with Project Planner Task in an Empty Cell displaying JS Error

Anonymous

02:19 PM Bug #16105 (Fixed with Hotfix): Usability: Tables Search window is not good

Anonymous

02:02 PM Bug #16086 (Fixed with Hotfix): Main/Main2: Creating a New Format displays JS Error for the Initial Stage

Anonymous

01:49 PM Bug #16096 (Fixed with Hotfix): Preferences New: Preferences New is not working and displaying Old Page

Anonymous

01:49 PM Bug #16098 (Fixed with Hotfix): Security Options New: Security Options New is not working

Anonymous

01:24 PM Bug #16087 (Fixed with Hotfix): Users Selection Window: In all the User Selection Window its having a New Column and by clicking on its icon for any User its displaying JS Error

Anonymous

12:40 PM Bug #16138 (Closed): Tag Search - The page keeps loading . Not able to proceed further

Tag Search - The page keeps loading . Not able to proceed further Ragavi Ram

11:52 AM Bug #16135 (Closed): In New concern creation page shows error

In New concern creation page shows error Rupa K

11:40 AM Bug #16123 (Fixed with Hotfix): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

Anonymous

11:09 AM Bug #16123 (Resolved): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

Iyappan hariharan

08:56 AM Bug #16123 (Open): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

User Admin

11:40 AM Bug #16124 (Fixed with Hotfix): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

Anonymous

11:09 AM Bug #16124 (Resolved): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

Iyappan hariharan

08:56 AM Bug #16124 (Open): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

User Admin

11:39 AM Bug #16122 (Fixed with Hotfix): Main2: Format Change is not working as expected found an unexpected behaviour

Anonymous

10:16 AM Bug #16125 (Resolved): Route-> When trying to create an ITAR route by a Non ITAR admin, it is displayed as a Non ITAR route in Edit route mode

Jacqueline Antonette

10:16 AM Bug #16119 (Resolved): Draft to document conversion-> When a draft is converted to document, the icon to add the Draft viewers is displayed in Draft details link in Document. It is possible to add draft viewers.

Jacqueline Antonette

10:16 AM Bug #16111 (Resolved): Document->Request details->Spelling of Reference is wrong. Also in Approver's pending request screen

Jacqueline Antonette

10:16 AM Bug #16006 (Resolved): New doc draft:No Alert message when requesting a draft w/o selecting level or w/o entering doc number and name

Jacqueline Antonette

10:16 AM Bug #16004 (Resolved): Draft requests needing viewing: Change request button is not displayed for the requester if all the draft viewers are removed. Whenever a draft viewer is removed, the change request button is not displayed for other draft viewers even if all are commented

Jacqueline Antonette

10:11 AM Bug #16112 (Resolved): Not able to export the project to xml

Varadharaj S

08:56 AM Bug #16112 (Open): Not able to export the project to xml

User Admin

10:10 AM Bug #16120 (Resolved): Document Viewer Publish Not working

Varadharaj S

08:56 AM Bug #16120 (Open): Document Viewer Publish Not working

User Admin

10:10 AM Bug #16106 (Resolved): EV AV recent fixes are not included in the first Build

Varadharaj S

10:10 AM Bug #16072 (Resolved): FST Linkage: Documents got mapped wrongly

Varadharaj S

09:44 AM Bug #16075 (Fixed with Hotfix): LPA : When Created Adhoc audit after LPA audit while Reschedule the Created adhoc audit schedules are not getting over riding and created schedule are not getting confirmed and publish button is not available.

When tried the scenario mentioned adhoc audit schedule is not getting override so as per nikhils comments changing th... Anonymous

09:17 AM Bug #16075: LPA : When Created Adhoc audit after LPA audit while Reschedule the Created adhoc audit schedules are not getting over riding and created schedule are not getting confirmed and publish button is not available.

Ad hoc Audit will not override on randomized Scheduling Nikhil d

09:16 AM Bug #16085 (Fixed with Hotfix): Suite : In Process/Activities screen while copying the Process Displays Object Error

Anonymous

09:16 AM Bug #16074 (Fixed with Hotfix): Suite : While creating new process duplicate process are getting created 2 times higher than the created process

Anonymous

09:16 AM Suggestion #16070 (Resolved): LPA : Approval process is need for adhoc schedule created with tentative status

Nikhil d

08:56 AM Bug #16127 (Open): Result & Documentation - After doing any operation in any of the documents, system hangs for a long time.

User Admin

08:56 AM Bug #16126 (Open): Customize Email message- When clicking on the customize email message tab, it shows login screen

User Admin

08:56 AM Bug #16118 (Open): Block Diagram - Alignment is not good in Show Item Boundaries dialog window

User Admin

08:56 AM Bug #16116 (Open): Study: Multi Parameter--> It shows the future date in date picker tool

User Admin

08:56 AM Bug #16115 (Open): Getting error while Publishing Inspection sheet

User Admin

12:31 AM Bug #16114 (Resolved): Inspection Parameters : Characteristics column header section is getting duplicated on adding a new characteristic / Perform refresh operation

Anonymous

12:30 AM Bug #16114 (Open): Inspection Parameters : Characteristics column header section is getting duplicated on adding a new characteristic / Perform refresh operation

Anonymous

12:31 AM Bug #16113 (Resolved): Inspection Parameters : Few columns are displayed with THLIC in Characteristics grid

Anonymous

12:30 AM Bug #16113 (Open): Inspection Parameters : Few columns are displayed with THLIC in Characteristics grid

Anonymous

04/07/2020

09:55 PM Bug #16132: Multi-Site : Part Equipment Mapping Page is not opening

Site Configuration should public IP Anonymous

08:30 PM Bug #16132 (Resolved): Multi-Site : Part Equipment Mapping Page is not opening

Anonymous

08:30 PM Bug #16132 (Open): Multi-Site : Part Equipment Mapping Page is not opening

Anonymous

07:19 PM Bug #16132 (Closed): Multi-Site : Part Equipment Mapping Page is not opening

Multi-Site : Part Equipment Mapping Page is not opening Anonymous

09:55 PM Bug #16130: Multi-Operation : In-process Inspection sheet is not loading

Site Configuration should public IP Anonymous

09:54 PM Bug #16130 (Resolved): Multi-Operation : In-process Inspection sheet is not loading

Anonymous

09:52 PM Bug #16130 (Open): Multi-Operation : In-process Inspection sheet is not loading

Anonymous

05:38 PM Bug #16130 (Closed): Multi-Operation : In-process Inspection sheet is not loading

Multi-Operation : In-process Inspection sheet is not loading Anonymous

09:55 PM Bug #16128: In-process Inspection sheet is not opening while entering lot number and clicking submit for the first time

Site Configuration should public IP Anonymous

09:53 PM Bug #16128 (Resolved): In-process Inspection sheet is not opening while entering lot number and clicking submit for the first time

Anonymous

09:53 PM Bug #16128 (Open): In-process Inspection sheet is not opening while entering lot number and clicking submit for the first time

Anonymous

05:15 PM Bug #16128 (Closed): In-process Inspection sheet is not opening while entering lot number and clicking submit for the first time

In-process Inspection sheet is not opening while entering lot number and clicking submit for the first time Anonymous

09:54 PM Bug #16129 (Resolved): Receiving/Final/Inprocess Inspeciton : Layout is getting changed while clicking on the breadcrumb(Receiving/Final/Inprocess) in the Inspection sheet page

Anonymous

09:53 PM Bug #16129 (Open): Receiving/Final/Inprocess Inspeciton : Layout is getting changed while clicking on the breadcrumb(Receiving/Final/Inprocess) in the Inspection sheet page

Anonymous

05:19 PM Bug #16129 (Closed): Receiving/Final/Inprocess Inspeciton : Layout is getting changed while clicking on the breadcrumb(Receiving/Final/Inprocess) in the Inspection sheet page

Receiving/Final/Inprocess Inspection : Layout is getting changed while clicking on the breadcrumb(Receiving/Final/Inp... Anonymous

08:31 PM Bug #16131 (Resolved): Multi-Site : Inspector/Operator details are not listed in the Inspection entry Popup

Anonymous

08:31 PM Bug #16131 (Open): Multi-Site : Inspector/Operator details are not listed in the Inspection entry Popup

Anonymous

07:15 PM Bug #16131 (Closed): Multi-Site : Inspector/Operator details are not listed in the Inspection entry Popup

Multi-Site : Inspector/Operator details are not listed in the Inspection entry Popup Anonymous

06:10 PM Bug #16090 (Resolved): (Chrome Browser) After creating a new Format, system hangs

fixed and provided for testing Iyappan hariharan

06:10 PM Bug #16088 (Resolved): (Chrome Browser) 7th AP - Add from other option is not responding

fixed and provided for testing Iyappan hariharan

06:08 PM Bug #16086 (Resolved): Main/Main2: Creating a New Format displays JS Error for the Initial Stage

fixed ready for testing Iyappan hariharan

06:08 PM Bug #16105 (Resolved): Usability: Tables Search window is not good

Iyappan hariharan

04:13 PM Bug #16105 (Not Fixed with Hotfix): Usability: Tables Search window is not good

Main: Issue is still there
Main2: Upper Side Ok but Lower Side need to reduce the space Anonymous

12:29 PM Bug #16105 (Resolved): Usability: Tables Search window is not good

Fixed and patches ready for testing Iyappan hariharan

06:08 PM Bug #16098 (Resolved): Security Options New: Security Options New is not working

Iyappan hariharan

04:02 PM Bug #16098 (Not Fixed with Hotfix): Security Options New: Security Options New is not working

Anonymous

11:39 AM Bug #16098 (Resolved): Security Options New: Security Options New is not working

Patches ready for testing Iyappan hariharan

06:08 PM Bug #16097 (Resolved): Security Definitions New: Security Definitions New is not working

Iyappan hariharan

04:02 PM Bug #16097 (Not Fixed with Hotfix): Security Definitions New: Security Definitions New is not working

Anonymous

11:39 AM Bug #16097 (Resolved): Security Definitions New: Security Definitions New is not working

Patches ready for testing Iyappan hariharan

06:08 PM Bug #16096 (Resolved): Preferences New: Preferences New is not working and displaying Old Page

Iyappan hariharan

04:02 PM Bug #16096 (Not Fixed with Hotfix): Preferences New: Preferences New is not working and displaying Old Page

Anonymous

11:38 AM Bug #16096 (Resolved): Preferences New: Preferences New is not working and displaying Old Page

Patches ready for testing Iyappan hariharan

06:08 PM Bug #16082 (Resolved): Main/Main2: Clicking on the Reconcile with Project Planner Task in an Empty Cell displaying JS Error

Iyappan hariharan

04:09 PM Bug #16082 (Not Fixed with Hotfix): Main/Main2: Clicking on the Reconcile with Project Planner Task in an Empty Cell displaying JS Error

Main2: It's Working as expected
Main: It's throwing another different JS Error as "Line: 941
Error: The value of ... Anonymous

01:59 PM Bug #16082 (Resolved): Main/Main2: Clicking on the Reconcile with Project Planner Task in an Empty Cell displaying JS Error

Fixed and patches ready for testing Iyappan hariharan

06:07 PM Bug #16084 (Resolved): Audit form -> After completed all the fields also,it displays error as " you have been editing something,if leave without saving the data".We are able close the audit form tab, when alert throw as " please set business rule"

Nikhil d

06:04 PM Bug #16085 (Resolved): Suite : In Process/Activities screen while copying the Process Displays Object Error

Raghu Ram

06:03 PM Bug #16074 (Resolved): Suite : While creating new process duplicate process are getting created 2 times higher than the created process

Raghu Ram

06:03 PM Bug #16087 (Resolved): Users Selection Window: In all the User Selection Window its having a New Column and by clicking on its icon for any User its displaying JS Error

Raghu Ram

11:47 AM Bug #16087: Users Selection Window: In all the User Selection Window its having a New Column and by clicking on its icon for any User its displaying JS Error

Not related to AQuA so assign back to Suite Iyappan hariharan

04:43 PM Bug #16122 (Resolved): Main2: Format Change is not working as expected found an unexpected behaviour

Fixed and patches provided for testing Iyappan hariharan

04:43 PM Bug #16122 (Open): Main2: Format Change is not working as expected found an unexpected behaviour

Iyappan hariharan

02:02 PM Bug #16122 (Closed): Main2: Format Change is not working as expected found an unexpected behaviour

Main2: If the User is having the Non-Default Format named as "Format1" and he tries to Switch that Format to Default ... Anonymous

04:41 PM Bug #16127 (Closed): Result & Documentation - After doing any operation in any of the documents, system hangs for a long time.

After doing any operation in any of the documents, system hangs for a long time. Shankar Narayanan

04:04 PM Bug #16083 (Fixed with Hotfix): Main2: Clicking on Show Override/Change Levels its displaying "Null" Message

Anonymous

01:04 PM Bug #16083 (Resolved): Main2: Clicking on Show Override/Change Levels its displaying "Null" Message

Fixed and Patches ready for testing Iyappan hariharan

04:03 PM Bug #16091 (Fixed with Hotfix): Main2: Create DocPro Hyperlink and Create DocPro Image Hyperlink is not having the Borders

Anonymous

11:39 AM Bug #16091 (Resolved): Main2: Create DocPro Hyperlink and Create DocPro Image Hyperlink is not having the Borders

Patches ready for testing Iyappan hariharan

04:01 PM Bug #16100 (Fixed with Hotfix): Main2: Bulk Publish is not working

Anonymous

11:38 AM Bug #16100 (Resolved): Main2: Bulk Publish is not working

Patches ready for testing Iyappan hariharan

10:11 AM Bug #16100 (Open): Main2: Bulk Publish is not working

User Admin

04:01 PM Bug #16101 (Fixed with Hotfix): Main2: PI Publish is not working

Anonymous

11:38 AM Bug #16101 (Resolved): Main2: PI Publish is not working

Patches ready for testing Iyappan hariharan

04:00 PM Bug #16103 (Fixed with Hotfix): Main2: Process Flow Information/Work Instructions is not working (Inside Document)

Anonymous

11:37 AM Bug #16103 (Resolved): Main2: Process Flow Information/Work Instructions is not working (Inside Document)

Patches ready for testing Iyappan hariharan

10:11 AM Bug #16103 (Open): Main2: Process Flow Information/Work Instructions is not working (Inside Document)

User Admin

04:00 PM Bug #16104 (Fixed with Hotfix): Main2: Process Flow Information/Work Instructions Publish not working (Inside Document)

Anonymous

11:37 AM Bug #16104 (Resolved): Main2: Process Flow Information/Work Instructions Publish not working (Inside Document)

Patches ready for testing Iyappan hariharan

03:58 PM Bug #16121 (Fixed with Hotfix): Main2: Can't able to Add the Other Formats Documents using Add or Add from Other option on the Format Icon

Anonymous

02:00 PM Bug #16121 (Resolved): Main2: Can't able to Add the Other Formats Documents using Add or Add from Other option on the Format Icon

Fixed and patches ready for testing Iyappan hariharan

02:00 PM Bug #16121 (Open): Main2: Can't able to Add the Other Formats Documents using Add or Add from Other option on the Format Icon

Iyappan hariharan

01:35 PM Bug #16121 (Closed): Main2: Can't able to Add the Other Formats Documents using Add or Add from Other option on the Format Icon

Main2: Can't able to Add the Other Formats Documents using Add or Add from Other option on the Format Icon
By Clic... Anonymous

03:37 PM Bug #16126 (Closed): Customize Email message- When clicking on the customize email message tab, it shows login screen

Customize Email message- When clicking on the customize email message tab, it shows login screen Kiruthika G

03:06 PM Bug #16125 (Open): Route-> When trying to create an ITAR route by a Non ITAR admin, it is displayed as a Non ITAR route in Edit route mode

Created on 7th April Smitha V

03:05 PM Bug #16125 (Closed): Route-> When trying to create an ITAR route by a Non ITAR admin, it is displayed as a Non ITAR route in Edit route mode

Route-> When trying to create an ITAR route, it is displayed as a Non ITAR route in Edit route mode Smitha V

02:17 PM Bug #16124: Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

Issue Created Twice need to delete one Anonymous

02:13 PM Bug #16124 (Closed): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

Main2: Open the Main2 and don't expand the Global Tree let it be and change the Format now expand the Global Tree and... Anonymous

02:10 PM Bug #16123 (Closed): Main2: Format Change is not working as expected found an unexpected behaviour (Different Issue not a duplicate issue so view the steps, description & Screenshot for clarity)

Main2: Open the Main2 and don't expand the Global Tree let it be and change the Format now expand the Global Tree and... Anonymous

12:07 PM Bug #16120 (Closed): Document Viewer Publish Not working

Document Viewer Publish Not working- No response on clicking the button malini C

11:43 AM Bug #16006: New doc draft:No Alert message when requesting a draft w/o selecting level or w/o entering doc number and name

Moved from All customer issues Smitha V

11:39 AM Bug #16119 (Open): Draft to document conversion-> When a draft is converted to document, the icon to add the Draft viewers is displayed in Draft details link in Document. It is possible to add draft viewers.

Issue added on 7th April Smitha V

11:38 AM Bug #16119 (Closed): Draft to document conversion-> When a draft is converted to document, the icon to add the Draft viewers is displayed in Draft details link in Document. It is possible to add draft viewers.

Draft to document conversion-> When a draft is converted to document, the icon to add the Draft viewers is displayed ... Smitha V

11:36 AM Bug #16118 (Closed): Block Diagram - Alignment is not good in Show Item Boundaries dialog window

Alignment is not good in Show Item Boundaries dialog window Shankar Narayanan

11:27 AM Bug #16004: Draft requests needing viewing: Change request button is not displayed for the requester if all the draft viewers are removed. Whenever a draft viewer is removed, the change request button is not displayed for other draft viewers even if all are commented

Issue moved from All customer issues Smitha V

11:19 AM Bug #16095: Supplier flow-> Filter-> Error is displayed while selecting the Audit type in filter

I got this error. Ref screenshot Anonymous

10:23 AM Bug #16095 (Resolved): Supplier flow-> Filter-> Error is displayed while selecting the Audit type in filter

1. Based on Audit Schedule Filters Audit conducted by, Audit program, Audit type it is working as expected ( With/Wit... Nikhil d

11:13 AM Bug #16116 (Closed): Study: Multi Parameter--> It shows the future date in date picker tool

Study: Multi Parameter--> It shows the future date in date picker tool Kiruthika G

10:55 AM Bug #16115 (Closed): Getting error while Publishing Inspection sheet

Getting error while Publishing Inspection sheet Anonymous

10:48 AM Bug #16114 (Closed): Inspection Parameters : Characteristics column header section is getting duplicated on adding a new characteristic / Perform refresh operation

Inspection Parameters : Characteristics column header section is getting duplicated on adding a new characteristic / ... Anonymous

10:43 AM Bug #16113 (Closed): Inspection Parameters : Few columns are displayed with THLIC in Characteristics grid

Inspection Parameters : Few columns are displayed with THLIC in Characteristics grid Anonymous

10:42 AM Bug #16112 (Closed): Not able to export the project to xml

Not able to export the project to xml- Showing blank malini C

10:35 AM Bug #16111 (Open): Document->Request details->Spelling of Reference is wrong. Also in Approver's pending request screen

Issue created on 7th April Smitha V

10:34 AM Bug #16111 (Closed): Document->Request details->Spelling of Reference is wrong. Also in Approver's pending request screen

Document->Request details->Spelling of Reference is wrong Smitha V

10:11 AM Suggestion #16070 (Open): LPA : Approval process is need for adhoc schedule created with tentative status

User Admin

10:11 AM Bug #16068 (Open): LPA : There is no differentiate between confirm/not confirm status for normal LPA schedule and Adhoc audit schedule.

User Admin

10:02 AM Bug #16075 (Resolved): LPA : When Created Adhoc audit after LPA audit while Reschedule the Created adhoc audit schedules are not getting over riding and created schedule are not getting confirmed and publish button is not available.

Nikhil d

09:45 AM Bug #16107: Route-> The default route 'Module Auto approval' is not displayed and a blank screen is displayed. When tried to create a new route also, a blank screen is displayed.

Created issue on 3rd April Smitha V

09:37 AM Bug #16107 (Fixed with Hotfix): Route-> The default route 'Module Auto approval' is not displayed and a blank screen is displayed. When tried to create a new route also, a blank screen is displayed.

Smitha V

09:36 AM Bug #16107 (Open): Route-> The default route 'Module Auto approval' is not displayed and a blank screen is displayed. When tried to create a new route also, a blank screen is displayed.

Smitha V

09:36 AM Bug #16107 (Closed): Route-> The default route 'Module Auto approval' is not displayed and a blank screen is displayed. When tried to create a new route also, a blank screen is displayed.

Route-> The default route 'Module Auto approval' is not displayed and a blank screen is displayed. When tried to crea... Smitha V

09:44 AM Bug #16110 (Fixed with Hotfix): Convert draft to a document-> When tried to convert a draft to a document, it keeps on loading. But when refreshed and checked, its already converted to document

Smitha V

09:44 AM Bug #16110 (Open): Convert draft to a document-> When tried to convert a draft to a document, it keeps on loading. But when refreshed and checked, its already converted to document

Issue created on 3rd April Smitha V

09:43 AM Bug #16110 (Closed): Convert draft to a document-> When tried to convert a draft to a document, it keeps on loading. But when refreshed and checked, its already converted to document

Convert draft to a document-> When tried to convert a draft to a document, it keeps on loading. But when refreshed an... Smitha V

09:42 AM Bug #16109 (Fixed with Hotfix): New Document Draft-> When clicked on New Document Draft also, an error occurred

Smitha V

09:42 AM Bug #16109 (Open): New Document Draft-> When clicked on New Document Draft also, an error occurred

Issue created on 3rd April Smitha V

09:41 AM Bug #16109 (Closed): New Document Draft-> When clicked on New Document Draft also, an error occurred

New Document Draft-> When clicked on New Document Draft also, an error occurred
Smitha V

09:40 AM Bug #16108 (Fixed with Hotfix): New Document Request-> When clicked on New Document Request menu, an error occureed as shown in Screen shot

Smitha V

09:39 AM Bug #16108 (Open): New Document Request-> When clicked on New Document Request menu, an error occureed as shown in Screen shot

Buld came on 3rd April and issue reported on 3rd April Smitha V

09:38 AM Bug #16108 (Closed): New Document Request-> When clicked on New Document Request menu, an error occureed as shown in Screen shot

New Document Request-> When clicked on New Document Request menu, an error occureed as shown in Screen shot
Smitha V

04/06/2020

07:12 PM Bug #16093 (Open): Result & Documentation - No Alert message is displayed while clicking on Save button

User Admin

05:14 PM Bug #16093 (Closed): Result & Documentation - No Alert message is displayed while clicking on Save button

No Alert message while clicking on Save button Shankar Narayanan

07:12 PM Bug #16092 (Open): Interface Function Matrix - Publish for Approval is not working in IFM

User Admin

05:10 PM Bug #16092 (Closed): Interface Function Matrix - Publish for Approval is not working in IFM

Publish for Approval is not working in IFM Shankar Narayanan

07:12 PM Bug #16089 (Open): Block Diagram - Save button is placed wrongly after Add/Remove elements

User Admin

05:03 PM Bug #16089 (Closed): Block Diagram - Save button is placed wrongly after Add/Remove elements

Save button is wrongly placed Shankar Narayanan

07:12 PM Bug #16079 (Open): Format Dropdown - Label for Format Dropdown displays THL

User Admin

04:11 PM Bug #16079 (Closed): Format Dropdown - Label for Format Dropdown displays THL

Label for Format Dropdown displays THL Shankar Narayanan

07:11 PM Bug #16085 (Open): Suite : In Process/Activities screen while copying the Process Displays Object Error

User Admin

04:43 PM Bug #16085 (Closed): Suite : In Process/Activities screen while copying the Process Displays Object Error

In Process/Activities screen while copying the Process Displays Object Error Anonymous

07:11 PM Bug #16081 (Open): Suite : Created meeting is not visible in listing screen

User Admin

04:20 PM Bug #16081 (Closed): Suite : Created meeting is not visible in listing screen

Created meeting is not visible in listing screen as well as Recurring meetings Anonymous

07:11 PM Bug #16074 (Open): Suite : While creating new process duplicate process are getting created 2 times higher than the created process

User Admin

01:06 PM Bug #16074 (Closed): Suite : While creating new process duplicate process are getting created 2 times higher than the created process

While creating new process duplicate process are getting created 2 times higher than the created process Anonymous

07:10 PM Bug #16077 (Open): Groups--> Access rights--> without giving the rights for list of measurement is shown in the report tab

User Admin

03:02 PM Bug #16077 (Closed): Groups--> Access rights--> without giving the rights for list of measurement is shown in the report tab

Issue 1: Groups - Report -> Without giving the access right for reports, it shows all the report as default - Closed... Kiruthika G

07:10 PM Bug #16076 (Open): Stability - When the least tolerance value of Gage as "0.0025", in stability study it shows the least tolerance value of "0".

User Admin

02:51 PM Bug #16076 (Closed): Stability - When the least tolerance value of Gage as "0.0025", in stability study it shows the least tolerance value of "0".

Stability - When the least tolerance value of Gage as "0.0025", in stability study it shows the least tolerance value... Kiruthika G

07:10 PM Bug #16095 (Open): Supplier flow-> Filter-> Error is displayed while selecting the Audit type in filter

User Admin

05:34 PM Bug #16095 (Closed): Supplier flow-> Filter-> Error is displayed while selecting the Audit type in filter

Need to create audit program as supplier
Anonymous

07:10 PM Bug #16084 (Open): Audit form -> After completed all the fields also,it displays error as " you have been editing something,if leave without saving the data".We are able close the audit form tab, when alert throw as " please set business rule"

User Admin

04:29 PM Bug #16084 (Closed): Audit form -> After completed all the fields also,it displays error as " you have been editing something,if leave without saving the data".We are able close the audit form tab, when alert throw as " please set business rule"

need to fix all pages,
1) Process page -> audit form
2) Audit program -> audit form
Anonymous

07:10 PM Bug #16075 (Open): LPA : When Created Adhoc audit after LPA audit while Reschedule the Created adhoc audit schedules are not getting over riding and created schedule are not getting confirmed and publish button is not available.

User Admin

01:47 PM Bug #16075 (Closed): LPA : When Created Adhoc audit after LPA audit while Reschedule the Created adhoc audit schedules are not getting over riding and created schedule are not getting confirmed and publish button is not available.

When Created Adhoc audit after LPA audit while Reschedule the Created adhoc audit schedules are not getting over ridi... Anonymous

07:09 PM Bug #16086 (Open): Main/Main2: Creating a New Format displays JS Error for the Initial Stage

User Admin

04:50 PM Bug #16086 (Closed): Main/Main2: Creating a New Format displays JS Error for the Initial Stage

If the User Logs On to the Site and accessing the Module and then he tries to Create a New Format then it will displa... Anonymous

07:09 PM Bug #16080 (Open): Main/Main2: Right-Click options are not working at the initial time and after 6th Click only the Right-Click options are working

User Admin

04:15 PM Bug #16080 (Closed): Main/Main2: Right-Click options are not working at the initial time and after 6th Click only the Right-Click options are working

Main/Main2: Right-Click options are not working at the initial time and after 6th Click only the Right-Click options ... Anonymous

07:08 PM Bug #16082 (Open): Main/Main2: Clicking on the Reconcile with Project Planner Task in an Empty Cell displaying JS Error

User Admin

04:22 PM Bug #16082 (Closed): Main/Main2: Clicking on the Reconcile with Project Planner Task in an Empty Cell displaying JS Error

Main/Main2: Clicking on the Reconcile with Project Planner Task in an Empty Cell displaying JS Error as
In MAIN M... Anonymous

07:08 PM Bug #16083 (Open): Main2: Clicking on Show Override/Change Levels its displaying "Null" Message

User Admin

04:26 PM Bug #16083 (Closed): Main2: Clicking on Show Override/Change Levels its displaying "Null" Message

Main2: Clicking on Show Override/Change Levels at first its displaying the "Null" Message and by closing that Null me... Anonymous

07:08 PM Bug #16087 (Open): Users Selection Window: In all the User Selection Window its having a New Column and by clicking on its icon for any User its displaying JS Error

User Admin

04:59 PM Bug #16087 (Closed): Users Selection Window: In all the User Selection Window its having a New Column and by clicking on its icon for any User its displaying JS Error

Users Selection Window: In all the User Selection Window its having a New Column and by clicking on its icon for any ... Anonymous

07:07 PM Bug #16088 (Open): (Chrome Browser) 7th AP - Add from other option is not responding

User Admin

05:00 PM Bug #16088 (Closed): (Chrome Browser) 7th AP - Add from other option is not responding

Add from other option is not responding. After clicking OK button, system does not respond Shankar Narayanan

07:07 PM Bug #16090 (Open): (Chrome Browser) After creating a new Format, system hangs

User Admin

05:05 PM Bug #16090 (Closed): (Chrome Browser) After creating a new Format, system hangs

After creating a new Format, system hangs Shankar Narayanan

07:06 PM Bug #16091 (Open): Main2: Create DocPro Hyperlink and Create DocPro Image Hyperlink is not having the Borders

User Admin

05:10 PM Bug #16091 (Closed): Main2: Create DocPro Hyperlink and Create DocPro Image Hyperlink is not having the Borders

Main2: Create DocPro Hyperlink and Create DocPro Image Hyperlink is not having the Borders in Main it having the Bord... Anonymous

07:05 PM Bug #16094 (Open): Sporadic Issue: By Doing Copy and Paste Branch its displaying an Error Message

User Admin

05:19 PM Bug #16094 (Closed): Sporadic Issue: By Doing Copy and Paste Branch its displaying an Error Message

Sporadic Issue: By Doing Copy and Paste Branch its displaying an Error Message
Initial Stage on 06.04.2020 this is... Anonymous

07:04 PM Bug #16096 (Open): Preferences New: Preferences New is not working and displaying Old Page

User Admin

05:35 PM Bug #16096 (Closed): Preferences New: Preferences New is not working and displaying Old Page

Preferences New: Preferences New is not working and displaying Old Page Anonymous

07:02 PM Bug #16097 (Open): Security Definitions New: Security Definitions New is not working

User Admin

05:37 PM Bug #16097 (Closed): Security Definitions New: Security Definitions New is not working

Security Definitions New: Security Definitions New is not working Anonymous

07:01 PM Bug #16098 (Open): Security Options New: Security Options New is not working

User Admin

05:39 PM Bug #16098 (Closed): Security Options New: Security Options New is not working

Security Options New: Security Options New is not working Anonymous

07:01 PM Bug #16100: Main2: Bulk Publish is not working

Repeated isue 16104 User Admin

06:58 PM Bug #16100: Main2: Bulk Publish is not working

Seems issue is repeatd, same as 16004 User Admin

06:09 PM Bug #16100 (Closed): Main2: Bulk Publish is not working

Main2: Bulk Publish is not working, If we tries to Select the Document its displaying JS Error and by Clicking on OK ... Anonymous

07:00 PM Bug #16101 (Open): Main2: PI Publish is not working

User Admin

06:10 PM Bug #16101 (Closed): Main2: PI Publish is not working

Main2: PI Publish is not working, If we tries to Select the Document its displaying JS Error and by Clicking on OK Bu... Anonymous

06:57 PM Bug #16103: Main2: Process Flow Information/Work Instructions is not working (Inside Document)

Prem Please Attach the Image , You mean to say it is loading Main page again User Admin

06:30 PM Bug #16103 (Closed): Main2: Process Flow Information/Work Instructions is not working (Inside Document)

Main2: While trying to Open the Process Flow Information/Work Instructions inside the document its Opening the "Main"... Anonymous

06:56 PM Bug #16104 (Open): Main2: Process Flow Information/Work Instructions Publish not working (Inside Document)

User Admin

06:30 PM Bug #16104 (Closed): Main2: Process Flow Information/Work Instructions Publish not working (Inside Document)

Main2: While trying to Publish the Process Flow Information/Work Instructions inside the document and by selecting th... Anonymous

06:55 PM Bug #16105 (Open): Usability: Tables Search window is not good

User Admin

06:36 PM Bug #16105 (Closed): Usability: Tables Search window is not good

Tables Search window is not good (Marked in the Image) Need to cut the extra space Anonymous

06:54 PM Bug #16106 (Open): EV AV recent fixes are not included in the first Build

User Admin

06:36 PM Bug #16106 (Closed): EV AV recent fixes are not included in the first Build

No able to verify completely on EVAV changes malini C

06:54 PM Bug #16072 (Open): FST Linkage: Documents got mapped wrongly

User Admin

12:30 PM Bug #16072 (Closed): FST Linkage: Documents got mapped wrongly

The DFMEA got mapped under Functional analysis, control plan got mapped under Voice of the customer malini C

04:55 PM Bug #15998 (Open): Comments Attachment: When clicking on the attachment, it should download with the document name, whereas its downloading with some random number along with the file type Ex: 219doc.doc

Smitha V

04:55 PM Bug #16004 (Open): Draft requests needing viewing: Change request button is not displayed for the requester if all the draft viewers are removed. Whenever a draft viewer is removed, the change request button is not displayed for other draft viewers even if all are commented

Smitha V

04:55 PM Bug #16005 (Open): Comments in Pending doc drafts: Cant see the likes form pending drafts wheras it can be seen from draft requests needing viewing(In all screens where draft details are shown)

Smitha V

04:54 PM Bug #16006 (Open): New doc draft:No Alert message when requesting a draft w/o selecting level or w/o entering doc number and name

Smitha V

04:53 PM Bug #16058 (Open): Document is not going to approval when autoapproval is set for new doc and approval for existing doc(only for assign author scenario)

Smitha V

11:37 AM Suggestion #16070 (Closed): LPA : Approval process is need for adhoc schedule created with tentative status

Approval process is need for adhoc schedule created with tentative status but when created with confirmed status appr... Anonymous

11:21 AM Bug #16068 (Closed): LPA : There is no differentiate between confirm/not confirm status for normal LPA schedule and Adhoc audit schedule.

There is no differentiate between confirm/not confirm status for normal LPA schedule and Adhoc audit schedule.
as ... Anonymous

04/03/2020

07:16 PM Bug #16034 (Open): Actions: Multi parameter calibration study details is not showing in the actions calibration field

User Admin

07:16 PM Bug #16024 (Open): Action menu: Site details not showing in the screen

User Admin

04:16 PM Bug #16058 (Closed): Document is not going to approval when autoapproval is set for new doc and approval for existing doc(only for assign author scenario)

Document is not going to approval when autoapproval is set for new doc and approval for existing doc(only for assign... Anonymous

04/02/2020

06:15 PM Bug #16034 (Closed): Actions: Multi parameter calibration study details is not showing in the actions calibration field

Issue 1: Actions: Multi parameter calibration study details is not showing in the actions calibration field
Issue... Kiruthika G

04/01/2020

10:41 AM Bug #15932 (TBD): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

User Admin

10:41 AM Bug #15932 (Open): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

User Admin

10:41 AM Bug #15932 (Resolved): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

User Admin

03/31/2020

06:25 PM Bug #16024 (Closed): Action menu: Site details not showing in the screen

Action menu: Site details not showing in the screen Kiruthika G

03/29/2020

05:26 PM Bug #16006 (Closed): New doc draft:No Alert message when requesting a draft w/o selecting level or w/o entering doc number and name

New doc draft:No Alert message when requesting a draft w/o enter doc number and name Anonymous

05:02 PM Bug #15929: Comments:When the comments are typed and pressed enter key, it should add the comments. Now it will add only if the user clicks on send button

Verified in Pandora Staging Anonymous

05:01 PM Bug #15932: Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

Verified in Pandora Staging Anonymous

05:00 PM Bug #15936: New document draft: Repeated (in days) label should be removed from min and max period label and Draft comment period label should be suffixed with (in days)

New doc draft label should be Draft comment period not commenting period Anonymous

03:12 PM Bug #16005 (Closed): Comments in Pending doc drafts: Cant see the likes form pending drafts wheras it can be seen from draft requests needing viewing(In all screens where draft details are shown)

Comments in Pending doc drafts: Cant see the likes form pending drafts wheras it can be seen from draft requests need... Anonymous

02:56 PM Bug #16004 (Closed): Draft requests needing viewing: Change request button is not displayed for the requester if all the draft viewers are removed. Whenever a draft viewer is removed, the change request button is not displayed for other draft viewers even if all are commented

Draft requests needing viewing: Change request button is not displayed for the requester if all the draft viewers are... Anonymous

03/28/2020

04:50 PM Bug #16001 (TBD): Email:when modifying the draft viewers(added/ removed any viewers, email is not generating, but when some viewers are replied then they will be notifying)but the name is not removed from the email table

Smitha V

04:05 PM Bug #16001: Email:when modifying the draft viewers(added/ removed any viewers, email is not generating, but when some viewers are replied then they will be notifying)but the name is not removed from the email table

Issue related to Email Table is fixed: removed user name is removed from the table
when adding a new viewer from... Anonymous

12:53 AM Bug #16001 (Closed): Email:when modifying the draft viewers(added/ removed any viewers, email is not generating, but when some viewers are replied then they will be notifying)but the name is not removed from the email table

when modifying the draft viewers(added/ removed any viewers, email is not generating, but when some viewers are repli... Anonymous

01:20 PM Bug #15932 (Fixed with Hotfix): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

User Admin

01:19 PM Bug #15932 (Resolved): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

User Admin

03/27/2020

11:25 PM Bug #15999 (Closed): Comments: User is not notified what the document has attached before clicking on send button. When the document is selected, then it should show the link before clicking on send

Comments: User is not notified what the document has attached before clicking on send button. When the document is se... Anonymous

11:15 PM Bug #15998 (Closed): Comments Attachment: When clicking on the attachment, it should download with the document name, whereas its downloading with some random number along with the file type Ex: 219doc.doc

Comments Attachment: When clicking on the attachment, it should download with the document name, whereas its download... Anonymous

03/26/2020

06:16 PM Bug #15932 (Not Fixed with Hotfix): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

Refer Screenshot . Not working as you mentioned during discussion Ragavi Ram

04:09 PM Bug #15932 (Resolved): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

User Admin

06:14 PM Bug #15986: Draft viewers User Popup: Should list only the users who has group access for the specific site. Now its showing all the users from all sites

Changed to WAD as discussed with Smitha and Jac. Anonymous

04:16 PM Bug #15986 (WAD): Draft viewers User Popup: Should list only the users who has group access for the specific site. Now its showing all the users from all sites

Changed to WAD As per bhuvana mail on 26-03-2020 User Admin

04:16 PM Bug #15986 (Open): Draft viewers User Popup: Should list only the users who has group access for the specific site. Now its showing all the users from all sites

User Admin

04:14 PM Bug #15986 (Closed): Draft viewers User Popup: Should list only the users who has group access for the specific site. Now its showing all the users from all sites

Draft viewers User Popup: Should list only the users who has group access for the specific site. Now its showing all ... Anonymous

04:09 PM Bug #15939 (TBD): After requesting the draft, there is no way to see the draft comment period for that particular draft

User Admin

04:09 PM Bug #15939 (Open): After requesting the draft, there is no way to see the draft comment period for that particular draft

User Admin

04:09 PM Bug #15939 (Resolved): After requesting the draft, there is no way to see the draft comment period for that particular draft

User Admin

04:08 PM Bug #15939 (TBD): After requesting the draft, there is no way to see the draft comment period for that particular draft

User Admin

04:08 PM Bug #15939 (Open): After requesting the draft, there is no way to see the draft comment period for that particular draft

User Admin

04:08 PM Bug #15939 (Closed): After requesting the draft, there is no way to see the draft comment period for that particular draft

User Admin

04:06 PM Bug #15940 (TBD): Pending Document Draft : In Comment section on replying for the other reviewers comments , there is no connection seen. Hierarchy need to maintained

User Admin

04:06 PM Bug #15940 (In Progress): Pending Document Draft : In Comment section on replying for the other reviewers comments , there is no connection seen. Hierarchy need to maintained

User Admin

03/25/2020

11:41 AM Bug #15932 (WAD): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

Jacqueline Antonette

11:40 AM Bug #15939 (WAD): After requesting the draft, there is no way to see the draft comment period for that particular draft

Jacqueline Antonette

11:38 AM Bug #15940 (WAD): Pending Document Draft : In Comment section on replying for the other reviewers comments , there is no connection seen. Hierarchy need to maintained

Jacqueline Antonette

03/24/2020

05:45 PM Bug #15932 (Open): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

Smitha V

05:18 PM Bug #15939 (Open): After requesting the draft, there is no way to see the draft comment period for that particular draft

Smitha V

01:38 PM Bug #15939 (Closed): After requesting the draft, there is no way to see the draft comment period for that particular draft

After requesting the draft, there is no way to see the draft comment period for that particular draft Anonymous

05:18 PM Bug #15940 (Open): Pending Document Draft : In Comment section on replying for the other reviewers comments , there is no connection seen. Hierarchy need to maintained

Smitha V

01:43 PM Bug #15940 (Closed): Pending Document Draft : In Comment section on replying for the other reviewers comments , there is no connection seen. Hierarchy need to maintained

Pending Document Draft : In Comment section on replying for the other reviewers comments , there is no connection see... Ragavi Ram

03/23/2020

05:26 PM Bug #15936 (Closed): New document draft: Repeated (in days) label should be removed from min and max period label and Draft comment period label should be suffixed with (in days)

New document draft: Repeated (in days) label should be removed from min and max period label and Draft comment perio... Anonymous

04:53 PM Bug #15932 (Closed): Comments: Popular tab should list only the comments which has more likes or which has at least one like. Now its showing all the comments

Comments: Popular tab should list only the comments which has more likes or which has likes Anonymous

04:30 PM Bug #15929 (Closed): Comments:When the comments are typed and pressed enter key, it should add the comments. Now it will add only if the user clicks on send button

Comments:When the comments are typed and pressed enter key, it should add the comments. Now it will add only if the u... Anonymous

03/20/2020

01:25 PM Bug #15906 (Open): Doc Pro: MSA-->Multi site-->User does not having the full access rights to view the Module(MSA pro)level.

Smitha V

01:25 PM Suggestion #15899 (Open): External Lab: When the gage created as External lab with option of enabled Bias and stability study, need to display bias and stability button while saving the gage

Smitha V