Activity
From 03/18/2018 to 04/16/2018
04/16/2018
- 07:07 PM Bug #5492 (Closed): Design VDA: Failure Analysis, while clicking on the Filter Option of Requirement/Failure Mode system displays entire Function, Requirement and Failure in the tree. Please Refer Screenshot
- Expected Result: Based on filter selection Function, Requirement and Failure should display in the Tree.
- 06:48 PM Bug #5491 (Closed): Process VDA - Failure Analysis - After adding Characteristics in Table view, System is displaying JS Error.
- After adding Characteristics/Failure in Table view, System is displaying JS Error.
- 06:42 PM Bug #5490 (Closed): Design VDA: In IFM click on Select Context Element or Add/Remove Elements then JS Error is displayed. Please Refer Screenshot
- Expected Result: JS Error should not display
- 06:27 PM Bug #5489 (Closed): Process VDA - Function Analysis - Unable to create Characteristics from Structure analysis window
- Unable to create Characteristics from Structure analysis window
- 06:18 PM Bug #5488 (Closed): Design VDA: In Function Analysis select any one the Filter Option of Requirement ID and goto Failure Analysis. Web Page Error alert is displayed. Please Refer Screenshot
- Expected Result: Web Page Error alert should not be display
- 06:10 PM Unit Level and Cosmetic Issues #5487 (Closed): Design VDA: In Failure Analysis there is no Filter Option for Requirement ID. Please Refer Screenshot
- Expected Result: Filter Option should be there for Requirement ID also.
- 06:09 PM Bug #5486 (Closed): Process VDA- 4m Dialog window - While creating 4m, Map to Existing Failure column displays a random values
- While creating 4m, Map to Existing Failure column displays a random values
- 05:59 PM Bug #5485 (Future Release): Design VDA: In Block Diagram Topic Element is allowing to Enable/check in the Add/Remove Elements Check box
- Expected Result: The Topic Element should not allow to enable/Check the check box.
Scenario: Select the Context El... - 03:18 PM Bug #5483 (Closed): Design and Process VDA: 1st select the Context Element/Topic Segment drop down field and select the Topic Element drop down field and again click on Context Element/Topic Segment drop down field, Context Element are displayed under Topic Element field
- Expected Result:
1.On Clicking on Context Element/Topic Segment drop down field only the Context Element/Topic Segm... - 02:57 PM Bug #5407 (Resolved): Function Analysis in Design VDA: In Requirement Tree and in Context Element the Selected "Airbag System" Element was displays with the Symbols
- Cant t able to replicate
- 02:57 PM Bug #5467 (Resolved): Design VDA: In Function and Failure Analysis, Function has multiple requirement, right click on requirement ID and delete the branch, requirement is getting deleted on refresh the deleted requirement is displayed
- Cant t able to replicate
- 10:40 AM Bug #5467 (Open): Design VDA: In Function and Failure Analysis, Function has multiple requirement, right click on requirement ID and delete the branch, requirement is getting deleted on refresh the deleted requirement is displayed
- 02:31 PM Bug #4990 (Resolved): Functional Analysis - In requirement Tree when clicking on context arrow, alignment is mismatching.
- 01:10 PM Bug #5481 (Closed): Design VDA: In Function and Failure Analysis under BOM Section select any System,Sub System or Component and make it as Topic Element and change the Context Element, then the Topic Element is not highlighted (Focus) in Green Color
- Expected Result: The Topic Element should be focused and should be display in Green Color
- 12:58 PM Bug #5480 (Closed): Design VDA: In Function and Failure Analysis, make "Component" as Topic Element from Topic Element drop down field and then change the Context Element, Component Element is not displaying
- Expected Result: Component Element should display without expanding the Subsystem
Design VDA: In Function and Failu... - 12:44 PM Bug #5479 (Closed): Design VDA: In Function Analysis select system,subsystem or component from Topic Element drop down field then JS Error is displayed
- Expected Result: JS Error should not display
- 11:43 AM Unit Level and Cosmetic Issues #5477 (Closed): Design VDA: In Function and Failure Analysis, in Table View right click on the column (Function,Requirement ID,Requirement and Failure Mode) and select Create Branch then one empty row is created. Please Refer Screenshot
- Expected Result: On Header Column it should allow to show the option to Create Branch and Delete Branch
- 11:29 AM Usability #5475 (Suggestion): Design VDA: In Function and Failure Analysis, in Tree View unable to Add Function and Requirement
- Expected Result: It will be very usable to the user if we provide the option to add Function and Requirement in Tree ...
- 11:06 AM Bug #5474 (Future Release): Design VDA: In Failure Analysis, when multiple requirement is there for one function then right click on last row Requirement ID and Create Branch the empty row is generated below the 1st row. Please refer screenshot
- Expected Result: The empty row should be generated below the last row
- 10:46 AM Bug #5413 (Resolved): Failure Analysis- When allocating element for any one of the parent function, system is hiding other function table in the EFC tree diagram
- 10:45 AM Bug #5457 (Resolved): Add External element in the block diagram select and right click shows js error
- 10:40 AM Bug #5457 (Open): Add External element in the block diagram select and right click shows js error
- 10:40 AM Bug #5472 (Open): Process VDA Create Operations - Scroll bar is not displayed while Adding more operation Group Sequence number
- 10:40 AM Bug #5471 (Open): Process VDA Function Analysis - When Changing the Topic Segment from the pop-up window, Page is not refreshing
- 10:40 AM Unit Level and Cosmetic Issues #5470 (Open): Design VDA: In IFM click on Function and Requirement button, Function and Requirement are in center alignment and also there is some space in the header. Please refer screenshot
- 10:40 AM Bug #5469 (Open): Process VDA Function Analysis - Double Clicking on Topic Segment dropdown is displaying Context element menu list of the selected topic element.
- 10:40 AM Bug #5468 (Open): Design VDA: In Function/Failure Analysis, under Tree diagram right click on Sub System and click on Make as Topic Element then Sub system is getting partially hided
- 10:40 AM Bug #5466 (Open): Design VDA: In Block Diagram, under Add/Remove Elements uncheck the parent element and click ok, in block diagram Child element is displayed again click on Add/Remove Elements button then child element is unchecked
- 10:40 AM Bug #5461 (Open): Failure analysis - Element that are mapped is displayed as not mapped.
04/13/2018
- 09:58 PM Bug #5246: Process VDA: Function Analysis- System is displaying the failure when creating the failure in functional Analysis, on refresh failure is disappearing
- Issues is not failure disappearing because by noticing the Active Document is "Function Analysis.
But here issue i... - 07:27 PM Bug #5472 (Closed): Process VDA Create Operations - Scroll bar is not displayed while Adding more operation Group Sequence number
- Scroll bar is not displayed while Adding more operation Group Sequence number.
Expected Result: Need Scroll option - 07:15 PM Bug #5471 (Closed): Process VDA Function Analysis - When Changing the Topic Segment from the pop-up window, Page is not refreshing
- When Changing the Topic Segment from the pop-up window, Page is not refreshing.
- 07:09 PM Unit Level and Cosmetic Issues #5470 (Closed): Design VDA: In IFM click on Function and Requirement button, Function and Requirement are in center alignment and also there is some space in the header. Please refer screenshot
- Design VDA: In IFM click on Function and Requirement button, Function and Requirement are in center alignment and als...
- 07:03 PM Bug #5469 (Closed): Process VDA Function Analysis - Double Clicking on Topic Segment dropdown is displaying Context element menu list of the selected topic element.
- Double Clicking on Topic Segment dropdown is displaying Context element menu list of the selected topic element.
- 06:28 PM Bug #5468 (Closed): Design VDA: In Function/Failure Analysis, under Tree diagram right click on Sub System and click on Make as Topic Element then Sub system is getting partially hided
- Design VDA: In Function/Failure Analysis, under Tree diagram right click on Sub System and click on Make as Topic Ele...
- 06:26 PM Usability #5447 (Resolved): Spordiac Issue->Design VDA: IN Function/Failure Analysis under Table View Insert row then right click on the Function one thick line is displayed.
- 05:58 PM Unit Level and Cosmetic Issues #5411 (Resolved): Fuunction Analysis - Horizontal Scrollbar is displayed in middle of the tree window.
- 05:57 PM Bug #5131 (Resolved): In Block Diagram select the Context and Topic Element save the block diagram and click on Show P-Diagram and also click on P-Diagram Menu. Internal and External Element is not displayed properly
- 05:57 PM Bug #5129 (Resolved): Failure Analysis: In EFC Tree section for Sub System Element flow down is there, when click on Context arrow flow down is not displayed from Sub System to Component level. Please refer screenshot
- 05:44 PM Bug #5467 (Closed): Design VDA: In Function and Failure Analysis, Function has multiple requirement, right click on requirement ID and delete the branch, requirement is getting deleted on refresh the deleted requirement is displayed
- Design VDA: In Function and Failure Analysis, Function has multiple requirement, right click on requirement ID and de...
- 01:32 PM Bug #5466 (Future Release): Design VDA: In Block Diagram, under Add/Remove Elements uncheck the parent element and click ok, in block diagram Child element is displayed again click on Add/Remove Elements button then child element is unchecked
- Design VDA: In Block Diagram, under Add/Remove Elements uncheck the parent element and click ok, in block diagram Chi...
04/12/2018
- 07:12 PM Bug #5144 (Not Resolved): Risk & Optimization - Following Issues occurs in both Risk and Optimization tabs.(Refer Description)
- • Data entered in Risk and Optimization is not displayed after reload - Not Fixed
Expected Result: After saving Risk... - 06:52 PM Bug #5167 (Closed): Structure Analysis in Process VDA: System is not responding and getting Hang by reloading the Menu for selecting the Newly Created Segment for making it as Topic Segment
- Closed in Sp750 Cycle 6
- 06:41 PM Bug #5167 (Resolved): Structure Analysis in Process VDA: System is not responding and getting Hang by reloading the Menu for selecting the Newly Created Segment for making it as Topic Segment
- 06:50 PM Bug #5455 (Closed): Process VDA Structure Analysis - Operations - Sequence number is not incremented. It displays only 1 for all the Sequence
- Closed in SP750 Cycle 6
- 06:28 PM Bug #5455 (Resolved): Process VDA Structure Analysis - Operations - Sequence number is not incremented. It displays only 1 for all the Sequence
- 06:45 PM Bug #5043 (In Progress): Block diagram - When dragging external element in to scope system is displaying the alert but when dragging the scope box system is allowing external element inside the scope.
- 06:43 PM Usability #5091 (In Progress): Function Analysis: Alignment was not correct for the Maximized Requirement Tree while Opening the Menu again
- 06:33 PM Usability #5396 (In Progress): Design VDA: Structure Analysis - Removing a element from Structure analysis is not refreshing the page automatically.
- 06:32 PM Bug #5168 (Closed): Process VDA:Blank Operation element display While adding Operation in Structure Analysis pop up display, here click on done button with out adding operation
- 06:32 PM Bug #5454: Process VDA - Structure analysis - Operations - Entered operation is not listed down
- WAD
- 06:29 PM Bug #5206 (Closed): Structure Analysis - When reloading the Structure analysis tab and Right click on Segment, system is displaying multiple menus in the list but when clicking system hangs-up(Refer screen shot)
- 06:25 PM Bug #4990 (In Progress): Functional Analysis - In requirement Tree when clicking on context arrow, alignment is mismatching.
- 06:23 PM Bug #5208 (Closed): Process VDA: In Function & Failure Analysis under Table View (Create Process Item Function, Create Effect, Create 4M, Create Work Element Function & Create Cause) options are not displayed
- 03:43 PM Bug #5208 (Resolved): Process VDA: In Function & Failure Analysis under Table View (Create Process Item Function, Create Effect, Create 4M, Create Work Element Function & Create Cause) options are not displayed
- 06:22 PM Unit Level and Cosmetic Issues #5409 (Closed): Design VDA: Filter option is displaying randomly in Function and Failure Analysis. Refer Screenshot
- 05:37 PM Unit Level and Cosmetic Issues #5409 (Resolved): Design VDA: Filter option is displaying randomly in Function and Failure Analysis. Refer Screenshot
- Diagram and filter will appear only for the Topic Element
- 06:22 PM Bug #5238 (In Progress): Function Analysis - When creating operations for multiple segments, all the segment is not displayed when reload.(Refer Descriptions)
- 05:36 PM Bug #5238 (Not Resolved): Function Analysis - When creating operations for multiple segments, all the segment is not displayed when reload.(Refer Descriptions)
- 05:36 PM Bug #5238: Function Analysis - When creating operations for multiple segments, all the segment is not displayed when reload.(Refer Descriptions)
- •While creating operations for multiple segment and refreshing Function analysis tab the previous selected segment al...
- 06:17 PM Bug #5246 (In Progress): Process VDA: Function Analysis- System is displaying the failure when creating the failure in functional Analysis, on refresh failure is disappearing
- 06:17 PM Bug #5274 (In Progress): •When a BOM element is selected as a BOM element of another PI, Requirement Tree is displaying both the Parent elements name. where one parent element is displayed as not flowed down.
- 04:10 PM Bug #5274 (Not Resolved): •When a BOM element is selected as a BOM element of another PI, Requirement Tree is displaying both the Parent elements name. where one parent element is displayed as not flowed down.
- Removed element is displayed even after refresh.
- 05:59 PM Usability #5447 (In Progress): Spordiac Issue->Design VDA: IN Function/Failure Analysis under Table View Insert row then right click on the Function one thick line is displayed.
- 05:58 PM Usability #5453 (In Progress): Process VDA: In Function Analysis under diagram section click on Up Arrow of Operation then Process Item Function and Work Element Function get collapsed.
- 05:44 PM Bug #5218 (In Progress): Process VDA: In Risk fields entered all the Input fields and in Process FMEA under Detective Controls column, Preventive Controls details is repeated and also under Responsibility column Admin,Omnex is displayed
- 05:38 PM Bug #5131 (In Progress): In Block Diagram select the Context and Topic Element save the block diagram and click on Show P-Diagram and also click on P-Diagram Menu. Internal and External Element is not displayed properly
- 05:18 PM Bug #5158 (Closed): Function Analysis - Dragging Component and dropping in System is displaying Component as Immediate child(Sub-system) of System(Refer Screenshot)
- 05:11 PM Bug #5157 (Closed): 3 Issues: 1. Function Analysis: In Requirement Tree the direction of the Context arrow is wrongly displayed and while clicking on Context arrow system display Same Requirement for multiple. 2.collapse the Context arrow of the parent is not responding
- 05:06 PM Unit Level and Cosmetic Issues #5411 (In Progress): Fuunction Analysis - Horizontal Scrollbar is displayed in middle of the tree window.
- 04:50 PM Bug #5150 (Closed): Failure Analysis - EFC Tree displays Black arrow instead of Green dotted Arrow even without Failure flowdown
- 04:42 PM Unit Level and Cosmetic Issues #5089 (Closed): Structure Analysis: "JS-Script" Error was occurring by clicking on the displayed names of System or Sub-System or Components
- 04:40 PM Bug #5212 (In Progress): Structure Analysis in Process VDA: The Operations and its 4m was loading for the Last Segment and its not loading for the Mapped Segment
- 03:05 PM Bug #5212: Structure Analysis in Process VDA: The Operations and its 4m was loading for the Last Segment and its not loading for the Mapped Segment
- Resolved On 12/04/2018
- 03:50 PM Bug #5147: AIAG VDA - Data entered in Risk and optimization are not displayed in AIAG VDA Design FMEA
- Added in Cause only
- 03:49 PM Bug #5147 (Not Resolved): AIAG VDA - Data entered in Risk and optimization are not displayed in AIAG VDA Design FMEA
- 03:15 PM Bug #4991 (Closed): Topic element - Selected Topic Element is not displayed in Topic element Dropdown.
- 12:21 PM Bug #5129 (In Progress): Failure Analysis: In EFC Tree section for Sub System Element flow down is there, when click on Context arrow flow down is not displayed from Sub System to Component level. Please refer screenshot
04/11/2018
- 07:11 PM Bug #5461 (Closed): Failure analysis - Element that are mapped is displayed as not mapped.
- Element that are mapped is displayed as not mapped.
- 07:09 PM Bug #5271 (Closed): 4m Selection - While selecting multiple 4m system is displaying all the selected 4m in same table. But on Refresh it displays only first selected 4m.
- 07:07 PM Bug #4989 (Closed): Failure analysis ->Elements that are not mapped is displayed in Red Indicator
- 07:06 PM Bug #5247 (Yet to Verify): Show DFMEA Button - Clicking Show DFMEA Button is displaying AIAG VDA Page
- Need to Discuss with the Developer Team, Whether Show Design FMEA or AIAG-VDA Design FMEA should display.
- 06:51 PM Bug #5246 (Not Resolved): Process VDA: Function Analysis- System is displaying the failure when creating the failure in functional Analysis, on refresh failure is disappearing
- Now Function/Failure button is added, In Function Analysis when Enable Failure button add failure, failure is added r...
- 06:47 PM Bug #4990 (Not Resolved): Functional Analysis - In requirement Tree when clicking on context arrow, alignment is mismatching.
- 06:42 PM Bug #5125 (Closed): Function Analysis : While creating a function and Requirement, system displays a JS Error. When closing the error message and pressing enter. System creates same function/requirement for multiple times.
- CLOSED IN SP750 CYCLE 6
- 06:23 PM Usability #5091 (Not Resolved): Function Analysis: Alignment was not correct for the Maximized Requirement Tree while Opening the Menu again
- 06:22 PM Bug #5135 (Closed): IFM(Add/Remove element) - External Element and context element is missing while clicking on the Add/Remove element button.(Refer Screenshot)
- 06:16 PM Bug #5133 (Closed): Topic and Context Element - When assigning top level parent (Ford Mustang) as context element system does not display all the child elements(Initiator)
- AS discussed with Biju this issue is Working as expected. So closing this issue in SP750 Cycle 6.
- 06:06 PM Bug #4972 (Closed): Context Element - Not able to select context element from the dropdown .
- 05:46 PM Bug #4971 (Future Release): Risk Analysis/Optimization - Risk analysis and optimization pages are not displaying when clicking on Tabs.
- As per the dev team this is not in the scope of this Release, we are moving this issue in to 810
- 05:46 PM Bug #4971 (Yet to Verify): Risk Analysis/Optimization - Risk analysis and optimization pages are not displaying when clicking on Tabs.
- 05:44 PM Bug #5208 (Future Release): Process VDA: In Function & Failure Analysis under Table View (Create Process Item Function, Create Effect, Create 4M, Create Work Element Function & Create Cause) options are not displayed
- As per the dev team this is not in the scope of this Release, we are moving this issue in to 810
- 05:43 PM Bug #5208 (Yet to Verify): Process VDA: In Function & Failure Analysis under Table View (Create Process Item Function, Create Effect, Create 4M, Create Work Element Function & Create Cause) options are not displayed
- 05:38 PM Bug #5145 (Not Resolved): Optimization - Following issues occurs in Date Picker field.(Refer Description)
- Partially Fixed.
Fixed-Even after date is selected date picker is displayed again on mouse hover
Fixed-Date selecte... - 05:34 PM Bug #5457 (Closed): Add External element in the block diagram select and right click shows js error
- Add external element in the block diagram ,select and right click shows js error
Excepted result:no action shoul... - 05:26 PM Unit Level and Cosmetic Issues #5248 (Closed): Create Characteristics - PC ID is not displayed in the Characteristics list Pop-up Window
- 05:23 PM Bug #5172 (Closed): Function Analysis(Design VDA) - While selecting function analysis tab, application is not responding.
- 04:26 PM Usability #5453 (Open): Process VDA: In Function Analysis under diagram section click on Up Arrow of Operation then Process Item Function and Work Element Function get collapsed.
- 02:34 PM Usability #5453 (Closed): Process VDA: In Function Analysis under diagram section click on Up Arrow of Operation then Process Item Function and Work Element Function get collapsed.
- Expected Result: While clicking on Up Arrow of Operation then only the Operation should get collapsed
1.If we clic... - 04:26 PM Usability #5447 (Open): Spordiac Issue->Design VDA: IN Function/Failure Analysis under Table View Insert row then right click on the Function one thick line is displayed.
- 04:26 PM Bug #5455 (Open): Process VDA Structure Analysis - Operations - Sequence number is not incremented. It displays only 1 for all the Sequence
- 02:49 PM Bug #5455 (Closed): Process VDA Structure Analysis - Operations - Sequence number is not incremented. It displays only 1 for all the Sequence
- Sequence number is not incremented. It displays only 1 for all the Sequence
Expected Result: For each Operation cr... - 04:26 PM Bug #5454 (Open): Process VDA - Structure analysis - Operations - Entered operation is not listed down
- 02:41 PM Bug #5454 (Closed): Process VDA - Structure analysis - Operations - Entered operation is not listed down
- Entered operation is not listed down
Expected Result- Added Operations should be listed in the Pop-up window - 02:28 PM Bug #5200 (Closed): Structure Analysis - While creating operation for a segment data is accepted only on Ctrl+Insert.(Refer Description)
- • While creating operation for a segment data is accepted only on Ctrl+Insert. - Fixed(Tab Key is working)
• Entered... - 02:17 PM Usability #5400 (Closed): Process VDA: In Function and Failure under diagram section click on Up Arrow border layer disappear
- 01:11 PM Bug #5218 (Not Resolved): Process VDA: In Risk fields entered all the Input fields and in Process FMEA under Detective Controls column, Preventive Controls details is repeated and also under Responsibility column Admin,Omnex is displayed
- Issue is Partially Fixed,
1. Admin,Omnex is displayed under Preventive Controls and Detective Controls columns. Ple... - 12:57 PM Unit Level and Cosmetic Issues #5216 (Closed): Process VDA: In Function Analysis/Failure Analysis, under Structure Analysis section select Operation then in Table View section. in Segment field, segment name is not displayed
- 12:51 PM Usability #5215 (Closed): Process VDA: Whatever Data we create/enter in all the menu, the data is displayed only after the refresh
- 12:45 PM Bug #5050 (Closed): In IFM H,M L is not displayed on selection. It is displayed only on refresh
- 12:40 PM Bug #5059 (Closed): Process VDA and Design VDA Pane design is not good as expected.
- Closed in SP750 Cycle 6
- 12:34 PM Unit Level and Cosmetic Issues #5148 (Closed): In EFC Tree Diagram is not displaying as Expected.
- 12:20 PM Bug #5276 (Closed): Table View - System is allowing to add Requirement and Failure without a function.
- 12:19 PM Bug #5397 (Closed): Process VDA: Structure Analysis - Structure Analysis window is not closing even after switching to other tabs.
- 12:09 PM Bug #5398 (Closed): After Adding or Removing a PI in Design VDA structure analysis is opening Process VDA Structure Analysis(Refer steps)
- 11:30 AM Bug #5408 (Closed): Function and Failure Analysis - Unable to add Requirement and Failure in Tree diagrams.(Refer Description)
- 11:21 AM Bug #5412 (Closed): Function Analysis - When clicking on the Context arrow on the first requirement table, Second requirement table is overlapping.
04/10/2018
- 06:40 PM Unit Level and Cosmetic Issues #5409 (Not Resolved): Design VDA: Filter option is displaying randomly in Function and Failure Analysis. Refer Screenshot
- Still Filter option is displaying randomly in Function and Failure Analysis. Refer Screenshot
- 06:33 PM Usability #5447 (Closed): Spordiac Issue->Design VDA: IN Function/Failure Analysis under Table View Insert row then right click on the Function one thick line is displayed.
- Spordiac Issue->Design VDA: IN Function/Failure Analysis under Table View Insert row then right click on the Function...
- 06:33 PM Bug #5344 (Closed): In failure Analysis : Risk and optimization is not working ,when selecting the Severity rating is all field of severity field is not working.
- 06:32 PM Bug #5041 (Closed): In context element other production item is displayed .
- 06:22 PM Bug #5343 (Closed): In requirement tree :Out dent is not working for the element
- 06:22 PM Bug #5357 (Closed): Process VDA:In Failure Analysis if i am adding new failure against Existing characteristics it is overriding the new failure in table.
- 06:13 PM Bug #5134 (Closed): Function Analysis: In BOM Section right click on System and select Add Existing BOM to the Element, Global check box is disable but it allowing to check the Global checkbox
- 06:10 PM Bug #5131 (Not Resolved): In Block Diagram select the Context and Topic Element save the block diagram and click on Show P-Diagram and also click on P-Diagram Menu. Internal and External Element is not displayed properly
- Webpage error is displaying and also the issue is not fixed. Please Refer Screenshot
- 05:57 PM Bug #5090 (Closed): Function Analysis: By Refreshing the Requirement Tree, the Marked "All down flow as done" for the Flow Down was disappeared
- This Issue was Verified in Cycle-6 and the Issue was Fixed so the QA Team is Closing this Issue.
- 05:56 PM Bug #5129 (Not Resolved): Failure Analysis: In EFC Tree section for Sub System Element flow down is there, when click on Context arrow flow down is not displayed from Sub System to Component level. Please refer screenshot
- When click on Context arrow of the Sub-System, Webpage error is displayed. Please refer screenshot
- 05:50 PM Bug #5212 (Not Resolved): Structure Analysis in Process VDA: The Operations and its 4m was loading for the Last Segment and its not loading for the Mapped Segment
- This Issue was Verified in Cycle-6 and the Issue was not Fixed so the QA Team is Changing the Status into Not Resolved.
- 05:29 PM Bug #5273 (Closed): Design VDA in Function Analysis: Selected BOM was not showing correctly by Switching the Views from Table to Tree in the Function Analysis window
- This Issue was Verified in Cycle-6 and the Issue was Fixed so the QA Team is Closing this Issue.
- 04:48 PM Bug #5345 (Closed): In failure Analysis :in failure analysis table click show AIAG DFMEA shows error
- 03:30 PM Bug #5127 (Closed): Failure Analysis: When Failure is not added for the Requirement then In EFC Tree (+F) button is not displayed
- 03:29 PM Bug #5127: Failure Analysis: When Failure is not added for the Requirement then In EFC Tree (+F) button is not displayed
- In Failure Analysis, both Requirement flow down and Failure flow down is shown. When Requirement flow down is opened,...
- 03:17 PM Unit Level and Cosmetic Issues #5108 (Closed): In FA-In Tree View insert 1 row and enter function, dnt press on enter just click ouside, same for Requirement then in Req ID Undefined is displayed
- Issued closed in CYC-6
- 02:53 PM Bug #5094 (Closed): Functional Analysis: In Function Analysis section select Table view, under Function header column select one function then right click and click on Delete Branch, the selected branch is not getting deleted
- Issue Closed in CYC-6
- 02:27 PM Bug #5200 (Resolved): Structure Analysis - While creating operation for a segment data is accepted only on Ctrl+Insert.(Refer Description)
- 12:03 PM Bug #5434: Design VDA: Goto Function Analysis and then goto Failure Analysis then only the EFC Tree section is displayed, Please Refer Screenshot
- In Function Analysis and Failure Analysis if we change the Topic Element then the above issue occurs, this is also on...
04/09/2018
- 05:04 PM Bug #5357 (Resolved): Process VDA:In Failure Analysis if i am adding new failure against Existing characteristics it is overriding the new failure in table.
- 03:31 PM Bug #5357 (Open): Process VDA:In Failure Analysis if i am adding new failure against Existing characteristics it is overriding the new failure in table.
- 04:43 PM Bug #5343 (Resolved): In requirement tree :Out dent is not working for the element
- 03:31 PM Bug #5343 (Open): In requirement tree :Out dent is not working for the element
- 04:43 PM Bug #5344 (Resolved): In failure Analysis : Risk and optimization is not working ,when selecting the Severity rating is all field of severity field is not working.
- 03:31 PM Bug #5344 (Open): In failure Analysis : Risk and optimization is not working ,when selecting the Severity rating is all field of severity field is not working.
- 04:42 PM Bug #5345 (Resolved): In failure Analysis :in failure analysis table click show AIAG DFMEA shows error
- 03:31 PM Bug #5345 (Open): In failure Analysis :in failure analysis table click show AIAG DFMEA shows error
- 04:40 PM Bug #5412 (Resolved): Function Analysis - When clicking on the Context arrow on the first requirement table, Second requirement table is overlapping.
- 03:31 PM Bug #5412 (Open): Function Analysis - When clicking on the Context arrow on the first requirement table, Second requirement table is overlapping.
- 04:40 PM Usability #5400 (Resolved): Process VDA: In Function and Failure under diagram section click on Up Arrow border layer disappear
- 03:31 PM Usability #5400 (Open): Process VDA: In Function and Failure under diagram section click on Up Arrow border layer disappear
- 04:39 PM Bug #5398 (Resolved): After Adding or Removing a PI in Design VDA structure analysis is opening Process VDA Structure Analysis(Refer steps)
- could not replicate
- 03:31 PM Bug #5398 (Open): After Adding or Removing a PI in Design VDA structure analysis is opening Process VDA Structure Analysis(Refer steps)
- 02:35 PM Bug #5398: After Adding or Removing a PI in Design VDA structure analysis is opening Process VDA Structure Analysis(Refer steps)
- could not replicate
- 04:38 PM Bug #5397 (Resolved): Process VDA: Structure Analysis - Structure Analysis window is not closing even after switching to other tabs.
- 03:31 PM Bug #5397 (Open): Process VDA: Structure Analysis - Structure Analysis window is not closing even after switching to other tabs.
- 04:36 PM Bug #5408 (Resolved): Function and Failure Analysis - Unable to add Requirement and Failure in Tree diagrams.(Refer Description)
- 03:31 PM Bug #5408 (Open): Function and Failure Analysis - Unable to add Requirement and Failure in Tree diagrams.(Refer Description)
- 04:35 PM Unit Level and Cosmetic Issues #5409 (Resolved): Design VDA: Filter option is displaying randomly in Function and Failure Analysis. Refer Screenshot
- 03:31 PM Unit Level and Cosmetic Issues #5409 (Open): Design VDA: Filter option is displaying randomly in Function and Failure Analysis. Refer Screenshot
- 03:31 PM Bug #5434 (Open): Design VDA: Goto Function Analysis and then goto Failure Analysis then only the EFC Tree section is displayed, Please Refer Screenshot
- 03:16 PM Bug #5434 (Closed): Design VDA: Goto Function Analysis and then goto Failure Analysis then only the EFC Tree section is displayed, Please Refer Screenshot
- The above issues occur in different scenario also.
Scenario: When we click Function Analysis for the second time the... - 03:31 PM Unit Level and Cosmetic Issues #5433 (Open): Design VDA: In Function and Failure Analysis under BOM Section right click on PI then "Create and Add Element" and "Add/Remove Existing BOM Element" is displaying as Selected
- 02:39 PM Unit Level and Cosmetic Issues #5433 (Closed): Design VDA: In Function and Failure Analysis under BOM Section right click on PI then "Create and Add Element" and "Add/Remove Existing BOM Element" is displaying as Selected
- Expected Result: While clicking on PI then "Create and Add Element" and "Add/Remove Existing BOM Element" should not ...
- 03:31 PM Bug #5413 (Open): Failure Analysis- When allocating element for any one of the parent function, system is hiding other function table in the EFC tree diagram
- 03:31 PM Unit Level and Cosmetic Issues #5411 (Open): Fuunction Analysis - Horizontal Scrollbar is displayed in middle of the tree window.
- 03:31 PM Bug #5407 (Open): Function Analysis in Design VDA: In Requirement Tree and in Context Element the Selected "Airbag System" Element was displays with the Symbols
- 03:31 PM Usability #5396 (Open): Design VDA: Structure Analysis - Removing a element from Structure analysis is not refreshing the page automatically.
- 03:15 PM Bug #4989 (Resolved): Failure analysis ->Elements that are not mapped is displayed in Red Indicator
- 02:38 PM Bug #5144 (Resolved): Risk & Optimization - Following Issues occurs in both Risk and Optimization tabs.(Refer Description)
- 02:22 PM Bug #5041 (Resolved): In context element other production item is displayed .
- 02:18 PM Bug #5050 (Resolved): In IFM H,M L is not displayed on selection. It is displayed only on refresh
- could not replicate
- 02:17 PM Bug #5094 (Resolved): Functional Analysis: In Function Analysis section select Table view, under Function header column select one function then right click and click on Delete Branch, the selected branch is not getting deleted
- 02:12 PM Bug #5157 (Resolved): 3 Issues: 1. Function Analysis: In Requirement Tree the direction of the Context arrow is wrongly displayed and while clicking on Context arrow system display Same Requirement for multiple. 2.collapse the Context arrow of the parent is not responding
- 02:11 PM Bug #5131 (Resolved): In Block Diagram select the Context and Topic Element save the block diagram and click on Show P-Diagram and also click on P-Diagram Menu. Internal and External Element is not displayed properly
- 02:09 PM Bug #5127 (Resolved): Failure Analysis: When Failure is not added for the Requirement then In EFC Tree (+F) button is not displayed
- In Failure Analysis, both Requirement flow down and Failure flow down is shown. When Requirement flow down is opened,...
- 02:08 PM Usability #5091 (Resolved): Function Analysis: Alignment was not correct for the Maximized Requirement Tree while Opening the Menu again
- 02:01 PM Bug #5273 (Resolved): Design VDA in Function Analysis: Selected BOM was not showing correctly by Switching the Views from Table to Tree in the Function Analysis window
- Had some logical issues and now it reolved
- 02:00 PM Bug #5145 (Resolved): Optimization - Following issues occurs in Date Picker field.(Refer Description)
- Had some logical issues and now it resolved
- 01:59 PM Bug #5147 (Resolved): AIAG VDA - Data entered in Risk and optimization are not displayed in AIAG VDA Design FMEA
- Add it in Cause branch
- 01:45 PM Bug #5238 (Resolved): Function Analysis - When creating operations for multiple segments, all the segment is not displayed when reload.(Refer Descriptions)
- 01:41 PM Bug #5206 (Resolved): Structure Analysis - When reloading the Structure analysis tab and Right click on Segment, system is displaying multiple menus in the list but when clicking system hangs-up(Refer screen shot)
- 01:33 PM Unit Level and Cosmetic Issues #5108 (Resolved): In FA-In Tree View insert 1 row and enter function, dnt press on enter just click ouside, same for Requirement then in Req ID Undefined is displayed
- 01:32 PM Bug #5134 (Resolved): Function Analysis: In BOM Section right click on System and select Add Existing BOM to the Element, Global check box is disable but it allowing to check the Global checkbox
- Removed the Checkbox for Global
- 01:30 PM Usability #5215 (Resolved): Process VDA: Whatever Data we create/enter in all the menu, the data is displayed only after the refresh
- 01:30 PM Bug #5208 (Resolved): Process VDA: In Function & Failure Analysis under Table View (Create Process Item Function, Create Effect, Create 4M, Create Work Element Function & Create Cause) options are not displayed
04/05/2018
- 03:10 PM Bug #5413 (Closed): Failure Analysis- When allocating element for any one of the parent function, system is hiding other function table in the EFC tree diagram
- When allocating element for any one of the parent function, system is hiding other function table in the EFC tree dia...
- 03:07 PM Bug #5412 (Closed): Function Analysis - When clicking on the Context arrow on the first requirement table, Second requirement table is overlapping.
- When clicking on the Context arrow on the first requirement table, Second requirement table is overlapping. cannot op...
- 01:34 PM Bug #5041: In context element other production item is displayed .
- Not an Issue
- 01:30 PM Bug #5127: Failure Analysis: When Failure is not added for the Requirement then In EFC Tree (+F) button is not displayed
- Not an Issue
- 01:26 PM Bug #5144: Risk & Optimization - Following Issues occurs in both Risk and Optimization tabs.(Refer Description)
- its not an issue@@
- 01:20 PM Bug #5158 (Resolved): Function Analysis - Dragging Component and dropping in System is displaying Component as Immediate child(Sub-system) of System(Refer Screenshot)
- 01:13 PM Unit Level and Cosmetic Issues #5411 (Closed): Fuunction Analysis - Horizontal Scrollbar is displayed in middle of the tree window.
- Horizontal Scrollbar is displayed in middle of the tree window.
- 01:02 PM Unit Level and Cosmetic Issues #5409 (Closed): Design VDA: Filter option is displaying randomly in Function and Failure Analysis. Refer Screenshot
- Expected Result: The Filter option should display in the Function and Failure Analysis section when it is in Table Vi...
- 12:36 PM Bug #4989 (Not Resolved): Failure analysis ->Elements that are not mapped is displayed in Red Indicator
- Without Mapping Function and Requirement Flow Down Indicator is displayed in Yellow Color. Please Refer Screenshot
- 12:32 PM Bug #5408 (Closed): Function and Failure Analysis - Unable to add Requirement and Failure in Tree diagrams.(Refer Description)
- Unable to add Requirement and Failure in Tree diagrams. Displays Error message.
But while adding through table view ... - 11:13 AM Bug #5407 (Closed): Function Analysis in Design VDA: In Requirement Tree and in Context Element the Selected "Airbag System" Element was displays with the Symbols
- In the Function Analysis, by clicking on the Context Element to Select the Elements the Element name displays with th...
04/04/2018
- 05:01 PM Usability #5400 (Closed): Process VDA: In Function and Failure under diagram section click on Up Arrow border layer disappear
- Process VDA: In Function and Failure under diagram section click on Up Arrow border layer disappear
- 04:03 PM Bug #5398 (Closed): After Adding or Removing a PI in Design VDA structure analysis is opening Process VDA Structure Analysis(Refer steps)
- •After Adding or Removing a PI in Design VDA structure analysis is opening Process VDA Structure Analysis
•Switch th... - 03:42 PM Bug #5397 (Closed): Process VDA: Structure Analysis - Structure Analysis window is not closing even after switching to other tabs.
- Process VDA: Structure Analysis - Structure Analysis window is not closing even after switching to other tabs.
- 03:32 PM Usability #5396 (Closed): Design VDA: Structure Analysis - Removing a element from Structure analysis is not refreshing the page automatically.
- Removing a element from Structure analysis is not refreshing the page automatically. But while adding it is refreshin...
04/02/2018
- 12:44 PM Bug #5357 (Closed): Process VDA:In Failure Analysis if i am adding new failure against Existing characteristics it is overriding the new failure in table.
- Process VDA:In Failure Analysis if i am adding new failure against Existing characteristics it is overriding the n...
03/31/2018
- 08:16 AM Bug #5123 (Closed): IFM: In Topic Element select, select option from Drop Down option, server error is displayed. Please refer screenshot
- 08:15 AM Bug #5120 (Closed): Functional Analysis: In the Topic Element Drop Down box select, Select option then system is getting hanged.
- 08:13 AM Bug #5094 (Not Resolved): Functional Analysis: In Function Analysis section select Table view, under Function header column select one function then right click and click on Delete Branch, the selected branch is not getting deleted
03/30/2018
- 05:56 AM Usability #5166 (Closed): Process VDA:In structure Analysis ,After adding 4m element ,again showing
- 05:54 AM Bug #5345 (Closed): In failure Analysis :in failure analysis table click show AIAG DFMEA shows error
- In failure Analysis :in failure analysis table click show AIAG DFMEA shows error msg
- 05:48 AM Bug #5344 (Closed): In failure Analysis : Risk and optimization is not working ,when selecting the Severity rating is all field of severity field is not working.
- In failure Analysis : Risk and optimization,when selecting the Severity rating is some field are disabled (Occurrence...
- 05:12 AM Bug #5137 (Closed): Drag and down function and requirement in the Requirement tree for the Parent PI item, its indicating flow down for PI and Flow up for Child BOM, click flow down triangle, it displays no data in the requirement flowdown popup
- 05:11 AM Usability #5042 (Closed): PI Pane - Click on the DFMEA tab. Close the tab without selecting any menu. Here system does not allow to click any menu.
- 05:10 AM Usability #5088 (Closed): In IFM matrix function and requirement window popup not able add new branch ,Right click action is not displaying
- 04:49 AM Bug #5343 (Closed): In requirement tree :Out dent is not working for the element
- In requirement tree and failure tree: collapse is not working for the parent element.
Expected: When the flown do... - 04:17 AM Bug #5138 (Closed): IMF - Child element is not displayed in IMF even after adding element
03/29/2018
- 01:10 AM Bug #5135 (Resolved): IFM(Add/Remove element) - External Element and context element is missing while clicking on the Add/Remove element button.(Refer Screenshot)
- 12:18 AM Usability #5042 (Resolved): PI Pane - Click on the DFMEA tab. Close the tab without selecting any menu. Here system does not allow to click any menu.
03/28/2018
- 11:45 PM Bug #5094 (Resolved): Functional Analysis: In Function Analysis section select Table view, under Function header column select one function then right click and click on Delete Branch, the selected branch is not getting deleted
- 07:28 AM Usability #5088 (Resolved): In IFM matrix function and requirement window popup not able add new branch ,Right click action is not displaying
03/27/2018
- 07:27 AM Bug #4991 (Resolved): Topic element - Selected Topic Element is not displayed in Topic element Dropdown.
- 07:27 AM Bug #5120 (Resolved): Functional Analysis: In the Topic Element Drop Down box select, Select option then system is getting hanged.
- 04:40 AM Bug #5138 (Resolved): IMF - Child element is not displayed in IMF even after adding element
- 04:34 AM Bug #5274 (Resolved): •When a BOM element is selected as a BOM element of another PI, Requirement Tree is displaying both the Parent elements name. where one parent element is displayed as not flowed down.
- 03:44 AM Bug #4971 (Resolved): Risk Analysis/Optimization - Risk analysis and optimization pages are not displaying when clicking on Tabs.
- 03:43 AM Unit Level and Cosmetic Issues #5089 (Resolved): Structure Analysis: "JS-Script" Error was occurring by clicking on the displayed names of System or Sub-System or Components
- 01:27 AM Unit Level and Cosmetic Issues #5132 (In Progress): In Block Diagram continuously click on Undo button. Internal and External element get collapsed and as well as Alert message is displayed
- 01:13 AM Bug #5172 (Resolved): Function Analysis(Design VDA) - While selecting function analysis tab, application is not responding.
- 01:08 AM Bug #5271 (Resolved): 4m Selection - While selecting multiple 4m system is displaying all the selected 4m in same table. But on Refresh it displays only first selected 4m.
03/26/2018
- 08:01 AM Bug #5212 (Resolved): Structure Analysis in Process VDA: The Operations and its 4m was loading for the Last Segment and its not loading for the Mapped Segment
- 06:23 AM Bug #5212 (Not Resolved): Structure Analysis in Process VDA: The Operations and its 4m was loading for the Last Segment and its not loading for the Mapped Segment
- This Issue was Verified in Cycle-4 and the Issue was not Fixed so the QA Team is Changing the Status into Not Resolved.
- 08:00 AM Bug #4990 (Resolved): Functional Analysis - In requirement Tree when clicking on context arrow, alignment is mismatching.
- 07:46 AM Bug #4990 (In Progress): Functional Analysis - In requirement Tree when clicking on context arrow, alignment is mismatching.
- 06:37 AM Bug #4990 (Not Resolved): Functional Analysis - In requirement Tree when clicking on context arrow, alignment is mismatching.
- This Issue was Verified in Cycle-4 and the Issue was not Fixed so the QA Team is Changing the Status into Not Resolved.
- 07:38 AM Bug #5247 (Resolved): Show DFMEA Button - Clicking Show DFMEA Button is displaying AIAG VDA Page
- 06:41 AM Bug #5247 (Not Resolved): Show DFMEA Button - Clicking Show DFMEA Button is displaying AIAG VDA Page
- This Issue was Verified in Cycle-4 and the Issue was not Fixed so the QA Team is Changing the Status into Not Resolved.
- 07:38 AM Bug #5276 (Resolved): Table View - System is allowing to add Requirement and Failure without a function.
- 06:36 AM Bug #5276: Table View - System is allowing to add Requirement and Failure without a function.
- Please Refer Screenshot
- 06:31 AM Bug #5276 (Not Resolved): Table View - System is allowing to add Requirement and Failure without a function.
- 05:52 AM Bug #5276 (Resolved): Table View - System is allowing to add Requirement and Failure without a function.
- 05:51 AM Bug #5276 (Open): Table View - System is allowing to add Requirement and Failure without a function.
- 07:37 AM Bug #5090 (Resolved): Function Analysis: By Refreshing the Requirement Tree, the Marked "All down flow as done" for the Flow Down was disappeared
- 07:32 AM Bug #5123 (Resolved): IFM: In Topic Element select, select option from Drop Down option, server error is displayed. Please refer screenshot
- 07:31 AM Bug #5125 (Resolved): Function Analysis : While creating a function and Requirement, system displays a JS Error. When closing the error message and pressing enter. System creates same function/requirement for multiple times.
- 06:41 AM Bug #5062 (Closed): Block Diagram - Snaplines, Send to front and sent back options are not responding
- 06:39 AM Bug #5275 (Closed): When changing the Topic/Context elements, JS error is displaying
- This Issue was Verified in Cycle-4 and the Issue was Fixed so the QA Team is Closing this Issue.
- 05:52 AM Bug #5275 (Resolved): When changing the Topic/Context elements, JS error is displaying
- 05:51 AM Bug #5275 (Open): When changing the Topic/Context elements, JS error is displaying
- 06:32 AM Bug #4974 (Closed): P-Diagram -Element name is not displayed in P diagram
- This Issue was Verified in Cycle-4 and the Issue was Fixed so the QA Team is Closing this Issue.
- 06:00 AM Bug #4972 (Resolved): Context Element - Not able to select context element from the dropdown .
- 05:51 AM Bug #5274 (Open): •When a BOM element is selected as a BOM element of another PI, Requirement Tree is displaying both the Parent elements name. where one parent element is displayed as not flowed down.
- 05:51 AM Bug #5273 (Open): Design VDA in Function Analysis: Selected BOM was not showing correctly by Switching the Views from Table to Tree in the Function Analysis window
- 05:51 AM Bug #5272 (Open): When selecting multiple data, system is displaying only one data in following pages.(Refer Description)
- 05:51 AM Bug #5271 (Open): 4m Selection - While selecting multiple 4m system is displaying all the selected 4m in same table. But on Refresh it displays only first selected 4m.
03/25/2018
- 09:18 PM Unit Level and Cosmetic Issues #5248 (Resolved): Create Characteristics - PC ID is not displayed in the Characteristics list Pop-up Window
- Had Some Technical issue now it's resolved
- 08:22 PM Usability #5166 (Resolved): Process VDA:In structure Analysis ,After adding 4m element ,again showing
- Pop Up will not open now, so close this issue
- 08:21 PM Bug #5168 (Resolved): Process VDA:Blank Operation element display While adding Operation in Structure Analysis pop up display, here click on done button with out adding operation
- Had some logical issue and got resolved
- 07:21 PM Unit Level and Cosmetic Issues #5148 (Resolved): In EFC Tree Diagram is not displaying as Expected.
- 06:57 PM Bug #5208: Process VDA: In Function & Failure Analysis under Table View (Create Process Item Function, Create Effect, Create 4M, Create Work Element Function & Create Cause) options are not displayed
- As said on demo, This is not a bug.
we are not taken that into the scope and you can able to do it from the Tree ... - 06:44 PM Bug #4974 (Resolved): P-Diagram -Element name is not displayed in P diagram
- 06:43 PM Bug #5062 (Resolved): Block Diagram - Snaplines, Send to front and sent back options are not responding
- 06:43 PM Bug #5129 (Resolved): Failure Analysis: In EFC Tree section for Sub System Element flow down is there, when click on Context arrow flow down is not displayed from Sub System to Component level. Please refer screenshot
- 06:42 PM Bug #5137 (Resolved): Drag and down function and requirement in the Requirement tree for the Parent PI item, its indicating flow down for PI and Flow up for Child BOM, click flow down triangle, it displays no data in the requirement flowdown popup
- 06:42 PM Bug #5150 (Resolved): Failure Analysis - EFC Tree displays Black arrow instead of Green dotted Arrow even without Failure flowdown
- 06:41 PM Bug #5247 (Resolved): Show DFMEA Button - Clicking Show DFMEA Button is displaying AIAG VDA Page
- 05:14 PM Bug #5212 (Resolved): Structure Analysis in Process VDA: The Operations and its 4m was loading for the Last Segment and its not loading for the Mapped Segment
- Had some technical issue and now it's resolved
- 04:40 PM Unit Level and Cosmetic Issues #5216 (Resolved): Process VDA: In Function Analysis/Failure Analysis, under Structure Analysis section select Operation then in Table View section. in Segment field, segment name is not displayed
- Had some technical issues now it's resolved
- 03:46 PM Unit Level and Cosmetic Issues #5217 (WAD): Process VDA: For Function Analysis and Failure Analysis, the Label/Title for the 1st window was showing as "Structure Analyis" instead of "Function Analysis/Failure Analysis"
- This is Working as per design,
Because As I said earlier, Function and failure Analysis has three frame window.
... - 03:27 PM Bug #5059: Process VDA and Design VDA Pane design is not good as expected.
- Attachment for P and D FMEA VDA
- 03:26 PM Bug #5059 (Resolved): Process VDA and Design VDA Pane design is not good as expected.
- !C:\Users\Omnex\Desktop\P&D VDA Menu.png!
Even and odd design order issue where resolved and attached for your ref... - 02:26 PM Bug #5246 (Resolved): Process VDA: Function Analysis- System is displaying the failure when creating the failure in functional Analysis, on refresh failure is disappearing
- I have removed the Context menu option to do it.
You can able to create failure from failure analysis.
- 12:21 PM Bug #5133 (Resolved): Topic and Context Element - When assigning top level parent (Ford Mustang) as context element system does not display all the child elements(Initiator)
- Only three levels is displayed in topic dropdown. IF initiator need to be listed, then topci should be Front impact A...
- 12:01 PM Bug #5218 (Resolved): Process VDA: In Risk fields entered all the Input fields and in Process FMEA under Detective Controls column, Preventive Controls details is repeated and also under Responsibility column Admin,Omnex is displayed
03/23/2018
- 07:07 PM Bug #5276 (Closed): Table View - System is allowing to add Requirement and Failure without a function.
- System is allowing to add Requirement and Failure without a function.
Requirement number is displayed as Undefined a... - 06:33 PM Bug #5275 (Closed): When changing the Topic/Context elements, JS error is displaying
- When changing the Topic/Context elements, JS error is displaying
- 06:25 PM Bug #5274 (Closed): •When a BOM element is selected as a BOM element of another PI, Requirement Tree is displaying both the Parent elements name. where one parent element is displayed as not flowed down.
- •When a BOM element is selected as a BOM element of another PI, Requirement Tree is displaying both the Parent elemen...
- 06:01 PM Bug #5273 (Closed): Design VDA in Function Analysis: Selected BOM was not showing correctly by Switching the Views from Table to Tree in the Function Analysis window
- By Selecting the Element in Bill of Material window, for the Table View its showing the Selected Element by viewing i...
- 06:00 PM Bug #5272 (Future Release): When selecting multiple data, system is displaying only one data in following pages.(Refer Description)
- When selecting multiple data, system is displaying only one data in following pages.
•Failure
•Effects
•Causes
•P... - 05:54 PM Bug #5271 (Closed): 4m Selection - While selecting multiple 4m system is displaying all the selected 4m in same table. But on Refresh it displays only first selected 4m.
- While selecting multiple 4m system is displaying all the selected 4m in same table. But on Refresh it displays only f...
- 05:44 PM Bug #5137 (In Progress): Drag and down function and requirement in the Requirement tree for the Parent PI item, its indicating flow down for PI and Flow up for Child BOM, click flow down triangle, it displays no data in the requirement flowdown popup
- 05:40 PM Unit Level and Cosmetic Issues #5248 (Open): Create Characteristics - PC ID is not displayed in the Characteristics list Pop-up Window
- 03:50 PM Unit Level and Cosmetic Issues #5248 (Closed): Create Characteristics - PC ID is not displayed in the Characteristics list Pop-up Window
- PC ID is not displayed in the Characteristics list Pop-up Window.
There is no Label for the Pop-up Window - 05:40 PM Bug #5247 (Open): Show DFMEA Button - Clicking Show DFMEA Button is displaying AIAG VDA Page
- 03:33 PM Bug #5247 (Closed): Show DFMEA Button - Clicking Show DFMEA Button is displaying AIAG VDA Page
- Show DFMEA Button - Clicking Show DFMEA Button is displaying AIAG VDA Page
- 05:40 PM Bug #5246 (Open): Process VDA: Function Analysis- System is displaying the failure when creating the failure in functional Analysis, on refresh failure is disappearing
- 03:10 PM Bug #5246 (Closed): Process VDA: Function Analysis- System is displaying the failure when creating the failure in functional Analysis, on refresh failure is disappearing
- System is displaying the failure when creating the failure in functional Analysis, on refresh failure is disappearing
- 05:40 PM Bug #5238 (Open): Function Analysis - When creating operations for multiple segments, all the segment is not displayed when reload.(Refer Descriptions)
- 12:21 PM Bug #5238 (Closed): Function Analysis - When creating operations for multiple segments, all the segment is not displayed when reload.(Refer Descriptions)
- •While creating operations for multiple segment and refreshing Function analysis tab the previous selected segment al...
- 05:19 PM Bug #5129 (In Progress): Failure Analysis: In EFC Tree section for Sub System Element flow down is there, when click on Context arrow flow down is not displayed from Sub System to Component level. Please refer screenshot
- 05:09 PM Unit Level and Cosmetic Issues #5148 (In Progress): In EFC Tree Diagram is not displaying as Expected.
- 05:07 PM Bug #5150 (In Progress): Failure Analysis - EFC Tree displays Black arrow instead of Green dotted Arrow even without Failure flowdown
- 05:05 PM Bug #5051 (Closed): Without adding Failures, system is displaying failure tree in failure analysis
- 03:36 PM Bug #5157: 3 Issues: 1. Function Analysis: In Requirement Tree the direction of the Context arrow is wrongly displayed and while clicking on Context arrow system display Same Requirement for multiple. 2.collapse the Context arrow of the parent is not responding
- If the Text is too large/Lengthy then in the Tree Diagram, the text is displaying outside the Box. This issues in bot...
- 02:43 PM Bug #4993 (Closed): Functional/Failure analysis - Show DFMEA button is not responding
- Closed in SP750 Cycle 4
- 02:14 PM Bug #5158 (In Progress): Function Analysis - Dragging Component and dropping in System is displaying Component as Immediate child(Sub-system) of System(Refer Screenshot)
03/22/2018
- 07:41 PM Bug #5218 (Open): Process VDA: In Risk fields entered all the Input fields and in Process FMEA under Detective Controls column, Preventive Controls details is repeated and also under Responsibility column Admin,Omnex is displayed
- 06:06 PM Bug #5218 (Closed): Process VDA: In Risk fields entered all the Input fields and in Process FMEA under Detective Controls column, Preventive Controls details is repeated and also under Responsibility column Admin,Omnex is displayed
- Process VDA: In Risk fields entered all the Input fields and in Process FMEA under Detective Controls, Preventive Con...
- 07:41 PM Unit Level and Cosmetic Issues #5217 (Open): Process VDA: For Function Analysis and Failure Analysis, the Label/Title for the 1st window was showing as "Structure Analyis" instead of "Function Analysis/Failure Analysis"
- 05:42 PM Unit Level and Cosmetic Issues #5217 (Closed): Process VDA: For Function Analysis and Failure Analysis, the Label/Title for the 1st window was showing as "Structure Analyis" instead of "Function Analysis/Failure Analysis"
- In Process VDA, While clicking on the Function Analysis Menu the 1st window should display the Label/Title as "Functi...
- 07:41 PM Unit Level and Cosmetic Issues #5216 (Open): Process VDA: In Function Analysis/Failure Analysis, under Structure Analysis section select Operation then in Table View section. in Segment field, segment name is not displayed
- 05:27 PM Unit Level and Cosmetic Issues #5216: Process VDA: In Function Analysis/Failure Analysis, under Structure Analysis section select Operation then in Table View section. in Segment field, segment name is not displayed
- Please Refer Screenshot
- 05:25 PM Unit Level and Cosmetic Issues #5216 (Closed): Process VDA: In Function Analysis/Failure Analysis, under Structure Analysis section select Operation then in Table View section. in Segment field, segment name is not displayed
- Process VDA: In Function Analysis/Failure Analysis, under Structure Analysis section select Operation then in Table V...
- 07:41 PM Usability #5215 (Open): Process VDA: Whatever Data we create/enter in all the menu, the data is displayed only after the refresh
- 05:12 PM Usability #5215 (Closed): Process VDA: Whatever Data we create/enter in all the menu, the data is displayed only after the refresh
- Process VDA: Whatever Data we create/enter in all the menu, the data is displayed only after the refresh
- 07:41 PM Bug #5212 (Open): Structure Analysis in Process VDA: The Operations and its 4m was loading for the Last Segment and its not loading for the Mapped Segment
- 03:43 PM Bug #5212 (Closed): Structure Analysis in Process VDA: The Operations and its 4m was loading for the Last Segment and its not loading for the Mapped Segment
- In Structure Analysis, by simply clicking Done Button without choosing the Segment on the Popup it showing the Operat...
- 07:41 PM Bug #5208 (Open): Process VDA: In Function & Failure Analysis under Table View (Create Process Item Function, Create Effect, Create 4M, Create Work Element Function & Create Cause) options are not displayed
- 03:17 PM Bug #5208 (Closed): Process VDA: In Function & Failure Analysis under Table View (Create Process Item Function, Create Effect, Create 4M, Create Work Element Function & Create Cause) options are not displayed
- Process VDA: In Function & Failure Analysis under Table View (Create Process Item Function, Create Effect, Create 4M,...
- 07:41 PM Bug #5206 (Open): Structure Analysis - When reloading the Structure analysis tab and Right click on Segment, system is displaying multiple menus in the list but when clicking system hangs-up(Refer screen shot)
- 03:14 PM Bug #5206 (Closed): Structure Analysis - When reloading the Structure analysis tab and Right click on Segment, system is displaying multiple menus in the list but when clicking system hangs-up(Refer screen shot)
- When reloading the Structure analysis tab and Right click on Segment, system is displaying multiple menus in the list...
- 07:41 PM Bug #5200 (Open): Structure Analysis - While creating operation for a segment data is accepted only on Ctrl+Insert.(Refer Description)
- 03:02 PM Bug #5200 (Closed): Structure Analysis - While creating operation for a segment data is accepted only on Ctrl+Insert.(Refer Description)
- • While creating operation for a segment data is accepted only on Ctrl+Insert.
• Entered operation is not listed dow... - 07:41 PM Bug #5172 (Open): Function Analysis(Design VDA) - While selecting function analysis tab, application is not responding.
- 11:05 AM Bug #5172 (Closed): Function Analysis(Design VDA) - While selecting function analysis tab, application is not responding.
- Function Analysis(Design VDA) - While selecting function analysis tab, application is not responding.
- 07:41 PM Bug #5168 (Open): Process VDA:Blank Operation element display While adding Operation in Structure Analysis pop up display, here click on done button with out adding operation
- 07:41 PM Bug #5167 (Open): Structure Analysis in Process VDA: System is not responding and getting Hang by reloading the Menu for selecting the Newly Created Segment for making it as Topic Segment
- 07:41 PM Usability #5166 (Open): Process VDA:In structure Analysis ,After adding 4m element ,again showing
- 07:41 PM Bug #5158 (Open): Function Analysis - Dragging Component and dropping in System is displaying Component as Immediate child(Sub-system) of System(Refer Screenshot)
- 07:41 PM Bug #5157 (Open): 3 Issues: 1. Function Analysis: In Requirement Tree the direction of the Context arrow is wrongly displayed and while clicking on Context arrow system display Same Requirement for multiple. 2.collapse the Context arrow of the parent is not responding
- 07:41 PM Bug #5153 (Open): Requirement Tree - While Drag and Drop function with multiple requirements, system is dragging last requirement instead of first requirement
- 07:41 PM Bug #5150 (Open): Failure Analysis - EFC Tree displays Black arrow instead of Green dotted Arrow even without Failure flowdown
- 07:41 PM Unit Level and Cosmetic Issues #5148 (Open): In EFC Tree Diagram is not displaying as Expected.
- 07:41 PM Bug #5147 (Open): AIAG VDA - Data entered in Risk and optimization are not displayed in AIAG VDA Design FMEA
- 07:41 PM Bug #5145 (Open): Optimization - Following issues occurs in Date Picker field.(Refer Description)
- 07:41 PM Bug #5144 (Open): Risk & Optimization - Following Issues occurs in both Risk and Optimization tabs.(Refer Description)
- 07:41 PM Bug #5138 (Open): IMF - Child element is not displayed in IMF even after adding element
- 04:39 PM Bug #4971 (Not Resolved): Risk Analysis/Optimization - Risk analysis and optimization pages are not displaying when clicking on Tabs.
- 03:54 PM Bug #4991 (Not Resolved): Topic element - Selected Topic Element is not displayed in Topic element Dropdown.
- 03:43 PM Bug #5043 (Not Resolved): Block diagram - When dragging external element in to scope system is displaying the alert but when dragging the scope box system is allowing external element inside the scope.
- Reference number/ID is allowed inside the scope
- 03:41 PM Bug #5062 (Not Resolved): Block Diagram - Snaplines, Send to front and sent back options are not responding
- snaplines is still there
03/21/2018
- 06:21 PM Bug #5168 (Closed): Process VDA:Blank Operation element display While adding Operation in Structure Analysis pop up display, here click on done button with out adding operation
- Process VDA: Blank Operation element display While adding Operation in Structure Analysis pop up display, here click...
- 06:16 PM Bug #5167 (Closed): Structure Analysis in Process VDA: System is not responding and getting Hang by reloading the Menu for selecting the Newly Created Segment for making it as Topic Segment
- After Creating the Segment and trying to Select the Created Segment as Topic Segment by clicking on the same Menu, th...
- 05:56 PM Usability #5166 (Closed): Process VDA:In structure Analysis ,After adding 4m element ,again showing
- Process VDA: In structure Analysis, After adding 4m element, again showing other link to add 4M element.
- 04:21 PM Bug #5158 (Closed): Function Analysis - Dragging Component and dropping in System is displaying Component as Immediate child(Sub-system) of System(Refer Screenshot)
- • Dragging Component and dropping in System is displaying Component as Immediate child(Sub-system) of System(Refer Sc...
- 04:17 PM Bug #5157 (Closed): 3 Issues: 1. Function Analysis: In Requirement Tree the direction of the Context arrow is wrongly displayed and while clicking on Context arrow system display Same Requirement for multiple. 2.collapse the Context arrow of the parent is not responding
- 1.Function Analysis: In Requirement Tree the direction of the Context arrow is wrongly displayed and while clicking o...
- 03:57 PM Bug #5153 (Closed): Requirement Tree - While Drag and Drop function with multiple requirements, system is dragging last requirement instead of first requirement
- While Drag and Drop function with multiple requirements, system is dragging last requirement instead of first require...
- 03:18 PM Bug #5150 (Closed): Failure Analysis - EFC Tree displays Black arrow instead of Green dotted Arrow even without Failure flowdown
- Failure Analysis - EFC Tree displays Black arrow instead of Green dotted Arrow even without Failure flowdown
- 03:13 PM Unit Level and Cosmetic Issues #5148 (Closed): In EFC Tree Diagram is not displaying as Expected.
- Effect is overlapping with the table border. Please refer Screenshot
- 03:11 PM Bug #5147 (Closed): AIAG VDA - Data entered in Risk and optimization are not displayed in AIAG VDA Design FMEA
- AIAG VDA - Data entered in Risk and optimization are not displayed in AIAG VDA Design FMEA.
- 02:48 PM Bug #5145 (Future Release): Optimization - Following issues occurs in Date Picker field.(Refer Description)
- Optimization - Following issues occurs in Date Picker field.
• Even after date is selected date picker is displayed ... - 02:31 PM Bug #5144 (Closed): Risk & Optimization - Following Issues occurs in both Risk and Optimization tabs.(Refer Description)
- Following Issues occurs in both Risk and Optimization tabs.(Refer Description)
• Data entered in Risk and Optimizati... - 12:32 PM Bug #5138 (Closed): IMF - Child element is not displayed in IMF even after adding element
- IMF - Child element is not displayed in IMF even after adding element
- 12:26 PM Bug #5137 (Open): Drag and down function and requirement in the Requirement tree for the Parent PI item, its indicating flow down for PI and Flow up for Child BOM, click flow down triangle, it displays no data in the requirement flowdown popup
- 12:02 PM Bug #5137 (Closed): Drag and down function and requirement in the Requirement tree for the Parent PI item, its indicating flow down for PI and Flow up for Child BOM, click flow down triangle, it displays no data in the requirement flowdown popup
- Drag and down function and requirement in the Requirement tree for the Parent PI item, its indicating flow down for P...
- 12:26 PM Bug #5135 (Open): IFM(Add/Remove element) - External Element and context element is missing while clicking on the Add/Remove element button.(Refer Screenshot)
- 11:01 AM Bug #5135 (Closed): IFM(Add/Remove element) - External Element and context element is missing while clicking on the Add/Remove element button.(Refer Screenshot)
- IFM(Add/Remove element) - External Element and context element is missing while clicking on the Add/Remove element bu...
- 12:26 PM Bug #5134 (Open): Function Analysis: In BOM Section right click on System and select Add Existing BOM to the Element, Global check box is disable but it allowing to check the Global checkbox
- 10:57 AM Bug #5134 (Closed): Function Analysis: In BOM Section right click on System and select Add Existing BOM to the Element, Global check box is disable but it allowing to check the Global checkbox
- Function Analysis: In BOM Section right click on System and select Add Existing BOM to the Element, Global check box ...
- 12:26 PM Bug #5133 (Open): Topic and Context Element - When assigning top level parent (Ford Mustang) as context element system does not display all the child elements(Initiator)
- 10:48 AM Bug #5133 (Closed): Topic and Context Element - When assigning top level parent (Ford Mustang) as context element system does not display all the child elements(Initiator)
- Topic and Context Element - When assigning top level parent (Ford Mustang) as context element system does not display...
- 12:26 PM Unit Level and Cosmetic Issues #5132 (Open): In Block Diagram continuously click on Undo button. Internal and External element get collapsed and as well as Alert message is displayed
- 12:26 PM Bug #5131 (Open): In Block Diagram select the Context and Topic Element save the block diagram and click on Show P-Diagram and also click on P-Diagram Menu. Internal and External Element is not displayed properly
- 12:26 PM Bug #5129 (Open): Failure Analysis: In EFC Tree section for Sub System Element flow down is there, when click on Context arrow flow down is not displayed from Sub System to Component level. Please refer screenshot
- 12:26 PM Bug #5128 (Open): Not able to add a bill of material for the first time for the child PI.
- 12:26 PM Bug #5127 (Open): Failure Analysis: When Failure is not added for the Requirement then In EFC Tree (+F) button is not displayed
- 12:26 PM Bug #5125 (Open): Function Analysis : While creating a function and Requirement, system displays a JS Error. When closing the error message and pressing enter. System creates same function/requirement for multiple times.
- 12:26 PM Bug #5123 (Open): IFM: In Topic Element select, select option from Drop Down option, server error is displayed. Please refer screenshot
- 12:26 PM Bug #5120 (Open): Functional Analysis: In the Topic Element Drop Down box select, Select option then system is getting hanged.
03/20/2018
- 07:54 PM Bug #5090 (In Progress): Function Analysis: By Refreshing the Requirement Tree, the Marked "All down flow as done" for the Flow Down was disappeared
- 05:24 PM Bug #5090 (Not Resolved): Function Analysis: By Refreshing the Requirement Tree, the Marked "All down flow as done" for the Flow Down was disappeared
- This Issue is not fixed so I changing this Issue from Resolved to Not Resolved
- 06:49 PM Unit Level and Cosmetic Issues #5132 (Closed): In Block Diagram continuously click on Undo button. Internal and External element get collapsed and as well as Alert message is displayed
- In Block Diagram continuously click on Undo button. Internal and External element get collapsed and as well as Alert ...
- 06:42 PM Bug #5131 (Closed): In Block Diagram select the Context and Topic Element save the block diagram and click on Show P-Diagram and also click on P-Diagram Menu. Internal and External Element is not displayed properly
- In Block Diagram select the Context and Topic Element save the block diagram and click on Show P-Diagram and also cl...
- 06:27 PM Bug #5129 (Closed): Failure Analysis: In EFC Tree section for Sub System Element flow down is there, when click on Context arrow flow down is not displayed from Sub System to Component level. Please refer screenshot
- Failure Analysis: In EFC Tree section for Sub System Element flow down is there, when click on Context arrow flow dow...
- 06:20 PM Bug #4974 (Not Resolved): P-Diagram -Element name is not displayed in P diagram
- 06:20 PM Usability #5063 (Closed): Structural Analysis - Mouse pointer is displayed as movable but it cannot be moved
- Closed in SP750 Cycle 4
- 06:19 PM Bug #5059 (Not Resolved): Process VDA and Design VDA Pane design is not good as expected.
- Issue remains in Design VDA
- 06:16 PM Bug #4989 (Yet to Verify): Failure analysis ->Elements that are not mapped is displayed in Red Indicator
- 06:16 PM Bug #4988 (Closed): Functional Analysis - In Functional Analysis ->click flow down context arrow continuously (shows error)
- Closed in SP750 Cycle 4
- 06:11 PM Bug #5128 (Closed): Not able to add a bill of material for the first time for the child PI.
- Not able to add a bill of material for the first time for the child PI.
- 06:08 PM Bug #5127 (Closed): Failure Analysis: When Failure is not added for the Requirement then In EFC Tree (+F) button is not displayed
- Failure Analysis: When Failure is not added for the Requirement then In EFC Tree (+F) button is not displayed. Please...
- 05:54 PM Bug #5046 (Closed): Function Analysis :While changing the Topic /Context element pages is shuffling
- 05:53 PM Bug #5045 (Closed): Structural analysis - Level no is not displayed
- 02:27 PM Bug #5045 (Resolved): Structural analysis - Level no is not displayed
- 05:49 PM Bug #5047 (Closed): Function analysis - While changing to tree view system displays JS Error and on mouse hover on the tab, button is sliding
- 05:48 PM Bug #5041 (Not Resolved): In context element other production item is displayed .
- 05:48 PM Bug #5041: In context element other production item is displayed .
I have already added bom in different PI(Airbag) which is seating and I am adding same BOm(seating) in different p...- 05:26 PM Unit Level and Cosmetic Issues #5089 (Not Resolved): Structure Analysis: "JS-Script" Error was occurring by clicking on the displayed names of System or Sub-System or Components
- This Issue is not fixed so changing this Status into Not Resolved
- 05:19 PM Bug #5048 (Closed): Function analysis - By default system is displaying Tree view instead of Table view. Even after changing it displays Tree view
- 05:17 PM Bug #5049 (Closed): Show Safety Function not needed in IFM
- 05:16 PM Bug #4987 (Closed): Functional analysis - When changing topic element function analysis page is not loading
- Closed in SP750 Cycle 4
- 05:15 PM Bug #5050 (Not Resolved): In IFM H,M L is not displayed on selection. It is displayed only on refresh
- 05:14 PM Bug #5051 (Yet to Verify): Without adding Failures, system is displaying failure tree in failure analysis
- 05:13 PM Bug #4982 (Closed): BOM –Right click is not working
- Closed in SP750 Cycle 4
- 05:13 PM Bug #5056 (Closed): I can Edit and Delete label in 5ts
- 05:13 PM Bug #5057 (Closed): I added Bom in Charging IC and Power Ic it is not displaying, After that I am not able to do any action in this page. Again, I have a refreshed entire page
- 05:12 PM Bug #4976 (Closed): 5T's - 5T’s is not inheriting to all child element
- Closed in SP750 Cycle 4
- 05:02 PM Bug #5125 (Closed): Function Analysis : While creating a function and Requirement, system displays a JS Error. When closing the error message and pressing enter. System creates same function/requirement for multiple times.
- •Function Analysis : While creating a function and Requirement, system displays a JS Error. When closing the error me...
03/19/2018
- 07:57 PM Bug #4994 (WAD): Homepage - While clicking backward arrow, system is displaying the login page. But when clicking on forward arrow, is directly displays the application.
- 06:40 PM Bug #5060 (Closed): Block Diagram - System is saving Block diagram without interface link label
- 06:34 PM Bug #5123 (Closed): IFM: In Topic Element select, select option from Drop Down option, server error is displayed. Please refer screenshot
- IFM: In Topic Element select, select option from Drop Down option, server error is displayed. Please refer screenshot
- 06:21 PM Bug #5120 (Closed): Functional Analysis: In the Topic Element Drop Down box select, Select option then system is getting hanged.
- Functional Analysis: In the Topic Element Drop Down box select, Select option then system is getting hanged.
- 05:03 PM Bug #4972 (Not Resolved): Context Element - Not able to select context element from the dropdown .
- Kindly find the latest Screenshot attached.
Scenario: Click on 5T's Menu, in Topic Element select, select option ... - 04:54 PM Bug #4970 (Closed): IFM - IFM is not working and shows error
- 04:53 PM Bug #5061 (Closed): Block Diagram - While Clicking Auto Layout graph icon, system displays error
- 04:42 PM Usability #5092 (Closed): Functional Analysis :Need delete branch option in table view
- 04:33 PM Unit Level and Cosmetic Issues #5093 (Closed): Failure Analysis: "JS-Script" Error was occurring while Maximize the EFC Tree Window in the Halfly opened Page
- 01:22 PM Unit Level and Cosmetic Issues #5108 (Open): In FA-In Tree View insert 1 row and enter function, dnt press on enter just click ouside, same for Requirement then in Req ID Undefined is displayed
- 01:22 PM Bug #5107 (Open): Right click on the Existing BOM Element, click on Add/Remove Existing BOM Element. Check and Uncheck the PI.
- 01:22 PM Bug #5095 (Open): Functional Analysis: In Function Analysis section select Table view, Insert row then enter Function and Requirement, under Requirement ID right click and click on Insert Branch. Now Insert new row, the Row is getting inserted like 1 function and Two requi
- 01:22 PM Bug #5094 (Open): Functional Analysis: In Function Analysis section select Table view, under Function header column select one function then right click and click on Delete Branch, the selected branch is not getting deleted
Also available in: Atom