Activity
From 10/30/2018 to 11/28/2018
11/28/2018
- 11:07 PM Bug #9899 (Resolved): US #24359 - Block Diagram - Menus are not closing when clicking on the Icons repeatedly.
- This not an issues click on the outside box it will close
- 10:38 PM Bug #9911 (Resolved): Upload findings Refer from doc pro attached attachment when retrieved does not display the attached document
- 10:09 PM Bug #9898 (Resolved): Process/Activities - Process scope in Edit process information pop up it is keep on displaying "loading...." message on screen.
- 10:09 PM Bug #9905 (Resolved): User Story : 24347 - User Replacement, Meetings Responsible Person - User pop up window does not have fixed size.
- 08:43 PM Bug #9979 (Closed): Alignment issue: In records, page after selecting questionnaire, alignment is not proper.
- Alignment issue: In records, page after selecting questionnaire, alignment is not proper.
- 08:21 PM Bug #9978 (Closed): US #24425 - OEE Changes: Should not allow to enter the Break time equal to or greater then the Load time. On entering value greater than the Load time the actual load time values displays minus value.
- US #24425 - OEE Changes: Should not allow to enter the Break time equal to or greater then the Load time. On entering...
- 08:20 PM Bug #9977 (Closed): After user has submitted the questionnaire, in doc pro the published document not working as expected.
- After user has submitted the questionnaire, in doc pro the published document not working as expected.
- 08:02 PM Bug #9931 (Resolved): User Story 24349 : Gage Creation Screen- Linearity study has label issue.
- 08:01 PM Bug #9946 (Resolved): Users Story 24349 - Masters - Alignment of Linearity field in initial schedule column is improper.
- 04:29 PM Bug #9946 (Open): Users Story 24349 - Masters - Alignment of Linearity field in initial schedule column is improper.
- 12:27 PM Bug #9946 (Closed): Users Story 24349 - Masters - Alignment of Linearity field in initial schedule column is improper.
- Users Story 24349 - Masters - Alignment of Linearity field in initial schedule column is improper.
- 08:00 PM Bug #9969 (Resolved): User Story 24349 - On changing the status of study result other than active it is not getting updated in Gage creation screen
- 07:51 PM Bug #9969 (Open): User Story 24349 - On changing the status of study result other than active it is not getting updated in Gage creation screen
- 05:34 PM Bug #9969 (Closed): User Story 24349 - On changing the status of study result other than active it is not getting updated in Gage creation screen
- User Story 24349 - On changing the status of study result other than active it is not getting updated in Gage creatio...
- 08:00 PM Bug #9962 (Resolved): Users Story 24349 - Master ( Linearity ) - Frequency is not working for both days and months in Linearity study field.
- 04:29 PM Bug #9962 (Open): Users Story 24349 - Master ( Linearity ) - Frequency is not working for both days and months in Linearity study field.
- 04:18 PM Bug #9962 (Closed): Users Story 24349 - Master ( Linearity ) - Frequency is not working for both days and months in Linearity study field.
- Users Story 24349 - Master ( Linearity ) - Frequency is not working for both days and months in Linearity study field.
- 07:55 PM Bug #9974 (Closed): US#24334:Lot number not getting auto-populated for In-process Inspection
- 07:54 PM Bug #9974 (Resolved): US#24334:Lot number not getting auto-populated for In-process Inspection
- 07:51 PM Bug #9974 (Open): US#24334:Lot number not getting auto-populated for In-process Inspection
- 07:11 PM Bug #9974 (Closed): US#24334:Lot number not getting auto-populated for In-process Inspection
- Lot number not getting auto-populated for In-process Inspection
- 07:55 PM Bug #9975 (Closed): US#24333:Getting error pop-up on entering Supplier details in Characteristic form
- 07:54 PM Bug #9975 (Resolved): US#24333:Getting error pop-up on entering Supplier details in Characteristic form
- 07:51 PM Bug #9975 (Open): US#24333:Getting error pop-up on entering Supplier details in Characteristic form
- 07:18 PM Bug #9975 (Closed): US#24333:Getting error pop-up on entering Supplier details in Characteristic form
- Getting error pop-up on entering Supplier details in Characteristic form
- 07:51 PM Bug #9976 (Open): US # 24425- OEE Changes: Alert for Start time selection and End Time selection needs to be change accordingly. (Refer Screenshot)
- 07:45 PM Bug #9976 (Closed): US # 24425- OEE Changes: Alert for Start time selection and End Time selection needs to be change accordingly. (Refer Screenshot)
- US # 24425- OEE Changes: Alert for Start time selection and End Time selection needs to be change accordingly.
- 07:51 PM Bug #9973 (Open): US#24332:Getting Server error on Clicking on Charts
- 06:49 PM Bug #9973 (Closed): US#24332:Getting Server error on Clicking on Charts
- On Clicking on charts getting server error
- 07:51 PM Bug #9972 (Open): US #2442 -OEE Changes: On entering the Break time and No demand value and clicking on save . The entered value is not getting updated. User needs to refresh the screen manually .
- 06:02 PM Bug #9972 (Closed): US #2442 -OEE Changes: On entering the Break time and No demand value and clicking on save . The entered value is not getting updated. User needs to refresh the screen manually .
- US #2442 -OEE Changes: On entering the Break time and No demand value and clicking on save . The entered value is not...
- 07:51 PM Bug #9971 (Open): System does not displays Home icon bread crumb for cause and Sub cause
- 05:46 PM Bug #9971 (Closed): System does not displays Home icon bread crumb for cause and Sub cause
- System does not displays Home icon bread crumb for cause and Sub cause but the page is going to the home (Audit pro)
- 07:51 PM Bug #9970 (Open): US #24425 - OEE Changes: Loss entry tab should display on ly based on the parts selected for the production entry. Instead it displays all the linked parts in the tab
- 05:43 PM Bug #9970 (Closed): US #24425 - OEE Changes: Loss entry tab should display on ly based on the parts selected for the production entry. Instead it displays all the linked parts in the tab
- US #24425 - OEE Changes: Loss entry tab should display on ly based on the parts selected for the production entry. In...
- 07:18 PM Bug #9947 (Resolved): Auditee corrective actions need to be displayed based on Audit number
- 12:34 PM Bug #9947 (Closed): Auditee corrective actions need to be displayed based on Audit number
- Auditee corrective actions need to be displayed based on Audit number but now system is displaying based on Auditee w...
- 07:06 PM Bug #9963 (Resolved): Social Media: Corrective actions close out legend color is mismatched with Auditpro
- Not an issue : previously Listed Audit-Status Legend
Now Listed NC-OFI Status - 05:20 PM Bug #9963 (Open): Social Media: Corrective actions close out legend color is mismatched with Auditpro
- 04:54 PM Bug #9963 (Closed): Social Media: Corrective actions close out legend color is mismatched with Auditpro
- EWQIMS Audit Pro Auditee response completed legend color blue tick not getting matched with the social media page cor...
- 06:57 PM Bug #9950 (Resolved): US #24331 Reopen email is not generated after user is clicking on Yes
- 04:29 PM Bug #9950 (Open): US #24331 Reopen email is not generated after user is clicking on Yes
- 01:48 PM Bug #9950 (Closed): US #24331 Reopen email is not generated after user is clicking on Yes
- 06:57 PM Bug #9943 (Resolved): Supplier self evaluation: Auditor -> Perform audit-> Fill checklists -> Alignment issue, Unable to attach any file using both option "From local machine & from Docpro"
- 06:57 PM Bug #9951 (Resolved): US #24331 Reopen email user prompt need to be changed (refer screenshot)
- 04:29 PM Bug #9951 (Open): US #24331 Reopen email user prompt need to be changed (refer screenshot)
- 01:50 PM Bug #9951 (Closed): US #24331 Reopen email user prompt need to be changed (refer screenshot)
- Expecetd "Do you want email notification for reopening this concern?"
- 06:42 PM Bug #9955 (Resolved): TC:DOC-S1-#24326-10-10: For reminder emails, frequency should be generate based on route settings, rather its taking 1 day before and after frequency
- 04:29 PM Bug #9955 (Open): TC:DOC-S1-#24326-10-10: For reminder emails, frequency should be generate based on route settings, rather its taking 1 day before and after frequency
- 02:50 PM Bug #9955 (Closed): TC:DOC-S1-#24326-10-10: For reminder emails, frequency should be generate based on route settings, rather its taking 1 day before and after frequency
- TC:DOC-S1-#24326-10-10: For reminder emails, frequency should be generate based on route settings, rather its taking ...
- 05:43 PM Bug #9862 (Resolved): US # 24359 - Block Diagram - Add/Remove elements, Select Context element, Show Interface Type and Publish for Approval Buttons are not working
- 05:38 PM Bug #9948 (Resolved): Even after providing access to multiple site as a module admin not able to view the all the sites from the site drop down
- Not an Issue
- 04:29 PM Bug #9948 (Open): Even after providing access to multiple site as a module admin not able to view the all the sites from the site drop down
- 12:50 PM Bug #9948 (Closed): Even after providing access to multiple site as a module admin not able to view the all the sites from the site drop down
- Even after providing access to multiple site as a module admin not able to view the all the sites from the site drop ...
- 05:30 PM Bug #9916 (In Progress): Supplier Audit/Supplier Self evaluation: System is not allowing to create direct actual audit using supplier even after applying filters
- 11:30 AM Bug #9916 (Not Resolved): Supplier Audit/Supplier Self evaluation: System is not allowing to create direct actual audit using supplier even after applying filters
- Still unbale to perform Actual Audit/Planned Audit after selecting any audit program under filter
Please refer the l... - 05:21 PM Bug #9968 (Open): Some of the fields are not displaying in the form when the form is initiated
- 05:13 PM Bug #9968 (Future Release): Some of the fields are not displaying in the form when the form is initiated
- Some of the fields are not displaying in the form when the form is initiated
- 05:20 PM Bug #9967 (Open): US #24425 - OEE Changes: On entering No demand values the system throws Alert like "No Demand time should be less then Load time" Even though the entered value is less than load time.
- 05:10 PM Bug #9967 (Closed): US #24425 - OEE Changes: On entering No demand values the system throws Alert like "No Demand time should be less then Load time" Even though the entered value is less than load time.
- US #24425 - OEE Changes: On entering No demand values the system throws Alert like "No Demand time should be less the...
- 05:20 PM Bug #9966 (Open): US #24425 - OEE Changes: In Equipment Part production Allowing to select single for multiple time
- 05:05 PM Bug #9966 (Closed): US #24425 - OEE Changes: In Equipment Part production Allowing to select single for multiple time
- US #24425 - OEE Changes: In Equipment Part production Allowing to select single for multiple time
- 05:20 PM Bug #9965 (Open): US #24425 - OEE Changes : Operating Time displays wrong value (Refer Screenshot)
- 05:01 PM Bug #9965 (Closed): US #24425 - OEE Changes : Operating Time displays wrong value (Refer Screenshot)
- US #24425 - OEE Changes : Operating Time displays wrong value (Refer Screenshot)
Case 1:
Actual Load time - 270
... - 04:39 PM Bug #9875 (Resolved): US #24361 - HARA - When clicking on any of the Search boxes, green color is filled in spaces fields.
- 04:38 PM Bug #9837 (Closed): APQP Actions are not listed in the Action management action for the resource.
- Working in SPrint 2
- 04:17 PM Bug #9837 (Resolved): APQP Actions are not listed in the Action management action for the resource.
- 04:17 PM Bug #9837: APQP Actions are not listed in the Action management action for the resource.
- This issue is not replicating
- 04:29 PM Bug #9860 (Resolved): US #24361 - HARA – While selecting/Unselecting Global checkbox on the Header, all the rows are not reflecting
- 04:29 PM Bug #9961 (Open): US #24425 - OEE Changes - Need proper alignment.
- 03:58 PM Bug #9961 (Closed): US #24425 - OEE Changes - Need proper alignment.
- US #24425 - OEE Changes - Need proper alignment.
- 04:29 PM Bug #9959 (Open): (US #24363) Function/Failure Analysis - In Tree View, Clicking on Function and Empty Requirement and Failure, System displays JS Error.
- 03:22 PM Bug #9959 (Closed): (US #24363) Function/Failure Analysis - In Tree View, Clicking on Function and Empty Requirement and Failure, System displays JS Error.
- In Tree View, Clicking on Function and Empty Requirement and Failure, System displays JS Error.
- 04:29 PM Bug #9958 (Open): (US #24362) Function/Failure Analysis - After hiding the Function, Requirement and Failure and then clicking on the Expand/Collapse arrow on the rectangle top, hidden function, Requirement and Failure is displayed irregularly.
- 03:16 PM Bug #9958 (Closed): (US #24362) Function/Failure Analysis - After hiding the Function, Requirement and Failure and then clicking on the Expand/Collapse arrow on the rectangle top, hidden function, Requirement and Failure is displayed irregularly.
- After hiding the Function, Requirement and Failure and then clicking on the Expand/Collapse arrow on the rectangle to...
- 04:29 PM Bug #9957 (Open): Checklists: Auditee corrective action page is not getting auto refreshed after publishing the document
- 03:00 PM Bug #9957 (Closed): Checklists: Auditee corrective action page is not getting auto refreshed after publishing the document
- Auditee Response-> After publishing the document auditee corrective action page not getting refreshed automatically h...
- 04:29 PM Bug #9956 (Open): Auditor after attaching the attachment against the checkpoint when retrieved the uploaded checklist does not displays the attached attachment.
- 02:59 PM Bug #9956 (Closed): Auditor after attaching the attachment against the checkpoint when retrieved the uploaded checklist does not displays the attached attachment.
- Auditor after attaching the attachment against the checkpoint when retrieved the uploaded checklist does not displays...
- 04:29 PM Bug #9954 (Open): Audit cycle widget displays all the available records but after the records are loaded displays blank space inside the widget
- 02:42 PM Bug #9954 (TBD): Audit cycle widget displays all the available records but after the records are loaded displays blank space inside the widget
- Audit cycle widget displays all the available records but after the records are loaded displays blank space inside th...
- 04:29 PM Bug #9953 (Open): Checklists: There is no need to display Rank option in checkpoint creation page as its parent checklists has score value set
- 02:08 PM Bug #9953 (Closed): Checklists: There is no need to display Rank option in checkpoint creation page as its parent checklists has score value set
- There is no need in option to select Rank when its parent has score value set already
- 04:29 PM Bug #9952 (Open): Checklists: Valiadation issue->Score value accepts decimal value and get saved by NA
- 02:05 PM Bug #9952 (Closed): Checklists: Valiadation issue->Score value accepts decimal value and get saved by NA
- Score value text box accepts decimal value and while saving the checkpoint the page get refreshed and displayed as NA...
- 04:29 PM Bug #9949 (Open): User Story 24347 - Teams - On selection of team leader it is displaying "object object" alert message on screen.
- 01:29 PM Bug #9949 (Closed): User Story 24347 - Teams - On selection of team leader it is displaying "object object" alert message on screen.
- User Story 24347 - Teams - On selection of team leader it is displaying "object object" alert message on screen.
- 04:29 PM Bug #9861 (Resolved): US #24361- HARA – While adding the Blank row from Operational Situation Dialog window, system is duplicating the Operational situation and when opening the Operational situation dialog window, Rows are unchecked.(Refer Steps)
- 04:29 PM Bug #9945 (Open): After creating training request, user cant able to consolidate the training
- 11:17 AM Bug #9945 (Closed): After creating training request, user cant able to consolidate the training
- 1. After creating training request, user cant able to consolidate the training. It shows Approval status as in progre...
- 04:28 PM Bug #9867 (Resolved): US #24361 - HARA - In Operational situation while selecting an Empty rows and Clicking OK button, system does not display any alert message.
- 04:28 PM Bug #9870 (Resolved): US #24361 - HARA – While adding/removing Safety Goals, Row height is enlarged.
- 04:28 PM Bug #9896 (Resolved): US #24361 - HARA - While creating Effects in Master Table, the latest created effect is automatically displayed in empty rows of Hazard and Effect.
- 04:27 PM Bug #9838 (Resolved): HARA - On Revisiting the Operational Situations page, Selected Operational Situations is displayed as unselected(Refer Description)
- 04:27 PM Bug #9928 (Resolved): (US #24362)AIAG VDA Design- FAilure Analysis- While Hiding Function and Failure Alignment is not good
- 04:14 PM Bug #9805 (Closed): When saving the remainder settings under escalation routes it shows error.(Not able to save route).
- Issue closed in SPRINT 2
- 03:48 PM Bug #9938 (Resolved): TC: DOC-S1-#24324-10-40: Document should not be viewed to the user who doesn't have access for the document
- this is not an issue
if the user does not have access to the document,you have to check he is module admin
if he ... - 02:30 PM Bug #9936 (Resolved): Supplier Audit: Auditee unable to respond the auditor findings
- 12:31 PM Bug #9934 (Resolved): User Story 24349 : If last study date field is selected with frequency of 1 month even though user is able to select any study date due to autofill functionality of browser and its getting saved.
- 12:30 PM Bug #9932 (Resolved): User Story 24349 : Study date is displaying incorrect as per the last study date.
- 12:06 PM Bug #9941 (Fixed with Hotfix): Supplier self evaluation : Auditee -> Supplier Self evaluation -> Label issue, Alignment issue
- Retested in the current build 100.166 and found it is working fine.Label and Alignment issue fixed.
- 11:08 AM Bug #9941 (Resolved): Supplier self evaluation : Auditee -> Supplier Self evaluation -> Label issue, Alignment issue
- 11:47 AM Bug #9942 (Fixed with Hotfix): Supplier Self Evaluation: Auditee->Supplier Self evaluation page -> Checklists link provided not working
- Retested and verified it is working fine.Checklists link working as expected
- 11:06 AM Bug #9942 (Resolved): Supplier Self Evaluation: Auditee->Supplier Self evaluation page -> Checklists link provided not working
- 11:08 AM Bug #9927 (Resolved): For List mapped checkpoint does not display any validation while changing the options form the drop down
- 11:08 AM Bug #9909 (Resolved): Upload NC/OFI Process selection window does not display slide bar
- 11:08 AM Bug #9908 (Resolved): Upload audit record checkpoints are not displaying in common series of checkpoints
11/27/2018
- 11:02 PM Bug #9926 (Resolved): Corrective action status displays wrong status of legend color when clicked on quick links widgets
- 05:28 PM Bug #9926 (In Progress): Corrective action status displays wrong status of legend color when clicked on quick links widgets
- 04:11 PM Bug #9926 (Open): Corrective action status displays wrong status of legend color when clicked on quick links widgets
- 03:11 PM Bug #9926 (Closed): Corrective action status displays wrong status of legend color when clicked on quick links widgets
- Corrective action status displays wrong status of legend color when clicked on quick links widgets but where as syste...
- 11:02 PM Bug #9921 (Resolved): Auditee corrective actions displays server error when clicked on the respective audit from the widget
- 05:27 PM Bug #9921 (In Progress): Auditee corrective actions displays server error when clicked on the respective audit from the widget
- 04:11 PM Bug #9921 (Open): Auditee corrective actions displays server error when clicked on the respective audit from the widget
- 01:08 PM Bug #9921 (Closed): Auditee corrective actions displays server error when clicked on the respective audit from the widget
- Auditee corrective actions displays server error when clicked on the respective audit from the widget
- 11:02 PM Bug #9920 (Resolved): In auditee login from the widgets when clicked on Corrective action status the page is loading for a long time
- 05:27 PM Bug #9920 (In Progress): In auditee login from the widgets when clicked on Corrective action status the page is loading for a long time
- 04:11 PM Bug #9920 (Open): In auditee login from the widgets when clicked on Corrective action status the page is loading for a long time
- 01:06 PM Bug #9920 (Closed): In auditee login from the widgets when clicked on Corrective action status the page is loading for a long time
- In auditee login from the widgets when clicked on Corrective action status the page is loading for a long time
- 11:02 PM Bug #9901 (Resolved): Pending or document waiting for approval requests are not displaying for the user when user login through social media
- 06:15 PM Bug #9901 (In Progress): Pending or document waiting for approval requests are not displaying for the user when user login through social media
- 04:11 PM Bug #9901 (Open): Pending or document waiting for approval requests are not displaying for the user when user login through social media
- 11:02 PM Bug #9877 (Resolved): The Quick link available for "NC Response Date Extension / Action Owner Change Request Approval (0)" the alignment is not displaying properly.
- 05:27 PM Bug #9877 (In Progress): The Quick link available for "NC Response Date Extension / Action Owner Change Request Approval (0)" the alignment is not displaying properly.
- 04:12 PM Bug #9877 (Open): The Quick link available for "NC Response Date Extension / Action Owner Change Request Approval (0)" the alignment is not displaying properly.
- 11:02 PM Bug #9876 (Resolved): when tried to publish the actual audit document from the publish window is not getting published
- 06:15 PM Bug #9876 (In Progress): when tried to publish the actual audit document from the publish window is not getting published
- 04:12 PM Bug #9876 (Open): when tried to publish the actual audit document from the publish window is not getting published
- 11:02 PM Bug #9873 (Resolved): Wrong tool tip displays for the tentative status if audit in Audit status page when mouse over
- 05:27 PM Bug #9873 (In Progress): Wrong tool tip displays for the tentative status if audit in Audit status page when mouse over
- 04:12 PM Bug #9873 (Open): Wrong tool tip displays for the tentative status if audit in Audit status page when mouse over
- 11:02 PM Bug #9871 (Resolved): When clicked on the hyperlink available in audit status quick link menu displays nc response date extension and action owner change request / audit details page with blank data
- 05:27 PM Bug #9871 (In Progress): When clicked on the hyperlink available in audit status quick link menu displays nc response date extension and action owner change request / audit details page with blank data
- 04:12 PM Bug #9871 (Open): When clicked on the hyperlink available in audit status quick link menu displays nc response date extension and action owner change request / audit details page with blank data
- 11:02 PM Bug #9869 (Resolved): Quick link from Audit status when clicked is not loading
- 05:27 PM Bug #9869 (In Progress): Quick link from Audit status when clicked is not loading
- 04:12 PM Bug #9869 (Open): Quick link from Audit status when clicked is not loading
- 09:52 PM Bug #9927 (In Progress): For List mapped checkpoint does not display any validation while changing the options form the drop down
- 04:11 PM Bug #9927 (Open): For List mapped checkpoint does not display any validation while changing the options form the drop down
- 03:33 PM Bug #9927 (Closed): For List mapped checkpoint does not display any validation while changing the options form the drop down
- For List mapped checkpoint does not display any validation while changing the options form the drop down list like ar...
- 09:22 PM Bug #9907 (Resolved): The Applied business logic's are not getting applied against the checkpoints
- The business logic had not been applied against the checkpoint. So it will not show any business logic in perform audit.
- 04:11 PM Bug #9907 (Open): The Applied business logic's are not getting applied against the checkpoints
- 10:13 AM Bug #9907 (Closed): The Applied business logic's are not getting applied against the checkpoints
- The Applied business logic's are not getting applied against the checkpoints for manual ,automatic , Rank
- 08:39 PM Bug #9933 (Resolved): (US #24363)AIAG VDA Design - Failure Analysis - When flow Up/Down is done and then Clicking on the Flow Up/Down Indicators, page is refreshing instead of displaying Flow Up/Down Dialog windows.
- 05:35 PM Bug #9933 (Open): (US #24363)AIAG VDA Design - Failure Analysis - When flow Up/Down is done and then Clicking on the Flow Up/Down Indicators, page is refreshing instead of displaying Flow Up/Down Dialog windows.
- 05:13 PM Bug #9933 (Closed): (US #24363)AIAG VDA Design - Failure Analysis - When flow Up/Down is done and then Clicking on the Flow Up/Down Indicators, page is refreshing instead of displaying Flow Up/Down Dialog windows.
- When flow Up/Down is done and then Clicking on the Flow Up/Down Indicators, page is refreshing instead of displaying ...
- 08:22 PM Bug #9930 (Resolved): (US #24362)AIAG VDA Design - Failure Analysis - Effect is displayed in separately when hiding Function, Requirement and Failures(Refer Desc)
- 04:11 PM Bug #9930 (Open): (US #24362)AIAG VDA Design - Failure Analysis - Effect is displayed in separately when hiding Function, Requirement and Failures(Refer Desc)
- 04:05 PM Bug #9930 (Closed): (US #24362)AIAG VDA Design - Failure Analysis - Effect is displayed in separately when hiding Function, Requirement and Failures(Refer Desc)
- Effect is displayed in separately when hiding Function, Requirement and Failures
- 08:18 PM Bug #9828 (Resolved): D VDA: In Design FMEA for 1 Function did the Multiple Failure and in Failure Analysis Tree Diagram Failure Flow down is displayed only for 1 Failure
- 07:14 PM Bug #9941 (In Progress): Supplier self evaluation : Auditee -> Supplier Self evaluation -> Label issue, Alignment issue
- 06:51 PM Bug #9941 (Open): Supplier self evaluation : Auditee -> Supplier Self evaluation -> Label issue, Alignment issue
- 05:42 PM Bug #9941 (Closed): Supplier self evaluation : Auditee -> Supplier Self evaluation -> Label issue, Alignment issue
- In Auditee Supplier self evaluation screen "Perform audit" label should be modified as according to Auditte action
I... - 07:08 PM Bug #9847 (Resolved): D VDA: In Design FMEA Click on the Component Element (Item/ Interface) column getting an JS Error. Please see the Description
- this issues is already fixed on 8.1.0.1 patch but I am not able see the changes so I have moved those changes into th...
- 06:53 PM Bug #9909 (In Progress): Upload NC/OFI Process selection window does not display slide bar
- 04:11 PM Bug #9909 (Open): Upload NC/OFI Process selection window does not display slide bar
- 10:25 AM Bug #9909 (Closed): Upload NC/OFI Process selection window does not display slide bar
- Upload NC/OFI Process selection window does not display slide bar
- 06:51 PM Bug #9943 (Open): Supplier self evaluation: Auditor -> Perform audit-> Fill checklists -> Alignment issue, Unable to attach any file using both option "From local machine & from Docpro"
- 05:49 PM Bug #9943 (Closed): Supplier self evaluation: Auditor -> Perform audit-> Fill checklists -> Alignment issue, Unable to attach any file using both option "From local machine & from Docpro"
- Supplier self evaluation: Auditor -> Perform audit-> Fill checklists -> Alignment issue, Unable to attach any file us...
- 06:51 PM Bug #9942 (Open): Supplier Self Evaluation: Auditee->Supplier Self evaluation page -> Checklists link provided not working
- 05:47 PM Bug #9942 (Closed): Supplier Self Evaluation: Auditee->Supplier Self evaluation page -> Checklists link provided not working
- Checklists link provided in Auditee supplier self evaluation page not working
- 06:51 PM Bug #9940 (Open): (US #24363)AIAG VDA Design - Failure Analysis - When flow up is done for the function that has two Failures without Requirement,the parent element is displayed for two times for the second Failure.
- 05:39 PM Bug #9940 (Closed): (US #24363)AIAG VDA Design - Failure Analysis - When flow up is done for the function that has two Failures without Requirement,the parent element is displayed for two times for the second Failure.
- When flow up is done for the function that has two Failures without Requirement,the parent element is displayed for t...
- 06:51 PM Bug #9939 (Open): As a role based user when multiple schedules are available on the same date in calendar is not feasible to use.
- 05:38 PM Bug #9939 (Closed): As a role based user when multiple schedules are available on the same date in calendar is not feasible to use.
- As a role based user when multiple schedules are available on the same date in calendar is not feasible to use. and a...
- 06:51 PM Bug #9938 (Open): TC: DOC-S1-#24324-10-40: Document should not be viewed to the user who doesn't have access for the document
- 05:41 PM Bug #9938: TC: DOC-S1-#24324-10-40: Document should not be viewed to the user who doesn't have access for the document
- Previously the document is opened , but now it shows 404 file directory not found
- 05:38 PM Bug #9938 (Closed): TC: DOC-S1-#24324-10-40: Document should not be viewed to the user who doesn't have access for the document
- US#24324. TC: DOC-S1-#24324-10-40: Document should not be viewed to the user who doesn't have access for the document
- 06:51 PM Bug #9937 (Open): Supplier Audit: Intermittent Issue in Auditor's Audit Assignment page
- 05:37 PM Bug #9937 (Closed): Supplier Audit: Intermittent Issue in Auditor's Audit Assignment page
- "Data not saved.Please verify filter settings and schedule an audit!!" error message is getting displayed while assig...
- 05:59 PM Bug #9916: Supplier Audit/Supplier Self evaluation: System is not allowing to create direct actual audit using supplier even after applying filters
- "Please select audit program" alert message is getting displayed when we have not filter with audit program and tried...
- 05:05 PM Bug #9916 (Resolved): Supplier Audit/Supplier Self evaluation: System is not allowing to create direct actual audit using supplier even after applying filters
- 04:11 PM Bug #9916 (Open): Supplier Audit/Supplier Self evaluation: System is not allowing to create direct actual audit using supplier even after applying filters
- 12:24 PM Bug #9916 (Closed): Supplier Audit/Supplier Self evaluation: System is not allowing to create direct actual audit using supplier even after applying filters
- System is not allowing to create direct actual audit using supplier even after applying filters displays alert as "pl...
- 05:55 PM Bug #9919 (Fixed with Hotfix): Supplier audit: The created audit from annual audit plan is not listing in perform audit when approval process is set to "No"
- Retested this defect after applied hot fix and its working fine. Able to perform an audit and assigned auditee respon...
- 05:05 PM Bug #9919 (Resolved): Supplier audit: The created audit from annual audit plan is not listing in perform audit when approval process is set to "No"
- 04:11 PM Bug #9919 (Open): Supplier audit: The created audit from annual audit plan is not listing in perform audit when approval process is set to "No"
- 12:59 PM Bug #9919 (Closed): Supplier audit: The created audit from annual audit plan is not listing in perform audit when approval process is set to "No"
- Supplier audit: The created audit from annual audit plan is not listing in perform audit when approval process is se...
- 05:54 PM Bug #9818 (Resolved): Design VDA: In Failure Analysis Hide the Req & Failure then alignment issue in Function Field
- 05:47 PM Bug #9908 (In Progress): Upload audit record checkpoints are not displaying in common series of checkpoints
- 04:11 PM Bug #9908 (Open): Upload audit record checkpoints are not displaying in common series of checkpoints
- 10:15 AM Bug #9908 (Closed): Upload audit record checkpoints are not displaying in common series of checkpoints
- Upload audit record checkpoints are not displaying in common series of checkpoints
- 05:47 PM Bug #9935: TC: DOC-S1-#24324-10-10 When copy and paste the document url, it shows error as "Failed to load PDF document"
- Previously its showing that error, now its showing 404 - File or directory not found.
- 05:35 PM Bug #9935 (Open): TC: DOC-S1-#24324-10-10 When copy and paste the document url, it shows error as "Failed to load PDF document"
- 05:24 PM Bug #9935 (Closed): TC: DOC-S1-#24324-10-10 When copy and paste the document url, it shows error as "Failed to load PDF document"
- When copy and paste the document url, it shows error as "Failed to load PDF document"
- 05:35 PM Bug #9936 (Open): Supplier Audit: Auditee unable to respond the auditor findings
- 05:30 PM Bug #9936 (Closed): Supplier Audit: Auditee unable to respond the auditor findings
- After performing an Audit by an Auditor, Auditee tried to respond back on clicking the CAR page not getting loaded.
... - 05:35 PM Bug #9934 (Open): User Story 24349 : If last study date field is selected with frequency of 1 month even though user is able to select any study date due to autofill functionality of browser and its getting saved.
- 05:15 PM Bug #9934 (Closed): User Story 24349 : If last study date field is selected with frequency of 1 month even though user is able to select any study date due to autofill functionality of browser and its getting saved.
- User Story 24349 : If last study date field is selected with frequency of 1 month even though user is able to select ...
- 05:35 PM Bug #9932 (Open): User Story 24349 : Study date is displaying incorrect as per the last study date.
- 04:35 PM Bug #9932: User Story 24349 : Study date is displaying incorrect as per the last study date.
- Days and Months frequency is not displaying the date as per the selected last study date.
- 04:34 PM Bug #9932 (Closed): User Story 24349 : Study date is displaying incorrect as per the last study date.
- User Story 24349 : Study date is displaying incorrect as per the last study date.
- 05:35 PM Bug #9931 (Open): User Story 24349 : Gage Creation Screen- Linearity study has label issue.
- 04:31 PM Bug #9931 (Closed): User Story 24349 : Gage Creation Screen- Linearity study has label issue.
- User Story 24349 : Gage Creation Screen- Linearity study has label issue.
- 05:13 PM Bug #9929 (TBD): AIAG VDA Design- Functional/Failure Analysis - While clicking Maximize and Minimize option JS error is displayed
- 04:11 PM Bug #9929 (Open): AIAG VDA Design- Functional/Failure Analysis - While clicking Maximize and Minimize option JS error is displayed
- 03:59 PM Bug #9929 (Closed): AIAG VDA Design- Functional/Failure Analysis - While clicking Maximize and Minimize option JS error is displayed
- While clicking Maximize and Minimize option JS error is displayed
- 05:12 PM Bug #9821 (TBD): D VDA: In Functional/Failure Analysis while adding the Multiple Req/Failure the new Row is getting inserted in the Second Row
- 05:07 PM Bug #9805 (Resolved): When saving the remainder settings under escalation routes it shows error.(Not able to save route).
- 05:05 PM Bug #9918 (Resolved): Supplier audit: The created audit from annual audit plan is not listing in month view
- 04:11 PM Bug #9918 (Open): Supplier audit: The created audit from annual audit plan is not listing in month view
- 12:55 PM Bug #9918 (Closed): Supplier audit: The created audit from annual audit plan is not listing in month view
- Supplier audit: The created audit from annual audit plan is not listing in month view when approval process for actua...
- 05:05 PM Bug #9917 (Resolved): The published audit report in approver login when clicked on document number hyperlink displays blank page
- 04:11 PM Bug #9917 (Open): The published audit report in approver login when clicked on document number hyperlink displays blank page
- 12:52 PM Bug #9917 (Closed): The published audit report in approver login when clicked on document number hyperlink displays blank page
- The published audit report in approver login when clicked on document number hyperlink displays blank page
- 04:50 PM Bug #9878 (Resolved): D VDA: Functional Analysis, Function to Function Flow up and Flow Down is not happen
- 04:12 PM Bug #9878 (Open): D VDA: Functional Analysis, Function to Function Flow up and Flow Down is not happen
- 04:12 PM Bug #9896 (Open): US #24361 - HARA - While creating Effects in Master Table, the latest created effect is automatically displayed in empty rows of Hazard and Effect.
- 04:12 PM Bug #9894 (Open): Loading icon - In Entity menu while adding Country, State and city, Entity Type, Business unit, Site Function it is not displaying loading icon on screen.
- 04:12 PM Bug #9893 (Open): User Story : 24347 - (IE Browser only) Users - On clicking Profile picture and signature icon it displays pop up window with double scroll bar.
- 04:12 PM Bug #9890 (Open): When user set the preference of default module as Audit pro and when clicked on the more options after login displays Suite menus
- 04:12 PM Bug #9879 (Open): After Creating the route from module the buttons on the top are getting hidden(Social media)
- 04:12 PM Bug #9875 (Open): US #24361 - HARA - When clicking on any of the Search boxes, green color is filled in spaces fields.
- 04:12 PM Bug #9870 (Open): US #24361 - HARA – While adding/removing Safety Goals, Row height is enlarged.
- 04:11 PM Bug #9868 (Open): LHS menu orders are getting changed for every login
- 04:11 PM Bug #9867 (Open): US #24361 - HARA - In Operational situation while selecting an Empty rows and Clicking OK button, system does not display any alert message.
- 04:11 PM Bug #9862 (Open): US # 24359 - Block Diagram - Add/Remove elements, Select Context element, Show Interface Type and Publish for Approval Buttons are not working
- 04:11 PM Bug #9861 (Open): US #24361- HARA – While adding the Blank row from Operational Situation Dialog window, system is duplicating the Operational situation and when opening the Operational situation dialog window, Rows are unchecked.(Refer Steps)
- 04:11 PM Bug #9860 (Open): US #24361 - HARA – While selecting/Unselecting Global checkbox on the Header, all the rows are not reflecting
- 04:11 PM Bug #9928 (Open): (US #24362)AIAG VDA Design- FAilure Analysis- While Hiding Function and Failure Alignment is not good
- 03:51 PM Bug #9928 (Closed): (US #24362)AIAG VDA Design- FAilure Analysis- While Hiding Function and Failure Alignment is not good
- While Hiding Function and Failure Alignment is not good
- 04:11 PM Bug #9925 (Open): Audit Calendar should have access to schedules based on roles
- 02:54 PM Bug #9925 (Closed): Audit Calendar should have access to schedules based on roles
- Audit Calendar should have access to schedules based on roles
example: System should allow the user to view the c... - 04:11 PM Bug #9924 (Open): The Legends of the perform audit is displaying in small tips
- 02:46 PM Bug #9924 (Fixed with Hotfix): The Legends of the perform audit is displaying in small tips
- The Legends of the perform audit is displaying in small tips
- 04:11 PM Bug #9922 (Open): Auditee corrective action using any of the concern form displays blank
- 01:13 PM Bug #9922 (Closed): Auditee corrective action using any of the concern form displays blank
- Auditee corrective action using any of the concern form displays blank
- 04:11 PM Bug #9914 (Open): The Attachments attached against the checkpoints are not view able when clicked
- 12:02 PM Bug #9914 (Closed): The Attachments attached against the checkpoints are not view able when clicked
- The Attachments attached against the checkpoints are not view able when clicked
- 04:11 PM Bug #9912 (Open): Not able to save the meeting in the project . it shows error.
- 11:36 AM Bug #9912 (Closed): Not able to save the meeting in the project . it shows error.
- Not able to save the meeting in the project . it shows error.
- 04:11 PM Bug #9911 (Open): Upload findings Refer from doc pro attached attachment when retrieved does not display the attached document
- 10:32 AM Bug #9911 (Closed): Upload findings Refer from doc pro attached attachment when retrieved does not display the attached document
- Upload findings Refer from doc pro attached attachment when retrieved does not display the attached document
- 04:11 PM Bug #9905 (Open): User Story : 24347 - User Replacement, Meetings Responsible Person - User pop up window does not have fixed size.
- 04:11 PM Bug #9900 (Open): Widgets are not displaying in widgets settings based on customization but system displays based on role
- 04:11 PM Bug #9899 (Open): US #24359 - Block Diagram - Menus are not closing when clicking on the Icons repeatedly.
- 04:11 PM Bug #9898 (Open): Process/Activities - Process scope in Edit process information pop up it is keep on displaying "loading...." message on screen.
- 01:19 PM Bug #9833 (Not Resolved): D VDA: In Main AQuA Pro For 1 Fun do the Multiple Failure Flow Up & Flow Down and in Failure Analysis Duplicate Failure Flow Up is displayed and in Failure Flow Down only one Failure Flow Down is displayed
- 12:55 PM Bug #9809 (Resolved): HARA - Search box alignment is not good in HARA.
- 10:46 AM Bug #9822 (Closed): D VDA:In Failure Analysis created Multiple Failure in System/Component Element against One Function, while Flow Up/Down the Multiple Failure, Multiple Failure Flow Up/Down is not displaying in the Diagram View
- 10:41 AM Bug #9819 (Closed): D VDA:In Failure Analysis Make Sub-System as Focus Element and do the Fun to Failure Flowup/down and select the System Element and switch to Functional View then Failure Tree Diagram is displayed in Functional Analysis
- 10:29 AM Bug #9844 (Closed): D VDA: Click on Functional/Failure Analysis menu and goto Design FMEA Menu then Fun, Req & Failure Icons are displayed
- 10:29 AM Bug #9844 (Resolved): D VDA: Click on Functional/Failure Analysis menu and goto Design FMEA Menu then Fun, Req & Failure Icons are displayed
11/26/2018
- 06:34 PM Bug #9905: User Story : 24347 - User Replacement, Meetings Responsible Person - User pop up window does not have fixed size.
- Escalation Routes- On selection of second round user it displays the double scroll bar in User selection pop up window.
- 06:30 PM Bug #9905: User Story : 24347 - User Replacement, Meetings Responsible Person - User pop up window does not have fixed size.
- Positions "Add Users" - No fixed size of User pop up window.
- 06:25 PM Bug #9905: User Story : 24347 - User Replacement, Meetings Responsible Person - User pop up window does not have fixed size.
- Meetings - Presentor/Facilator user pop up window does not have fixed size.
- 06:19 PM Bug #9905: User Story : 24347 - User Replacement, Meetings Responsible Person - User pop up window does not have fixed size.
- Same issue occurs with Teams Page.
- 06:12 PM Bug #9905 (Closed): User Story : 24347 - User Replacement, Meetings Responsible Person - User pop up window does not have fixed size.
- User Story : 24347 - User Replacement - User pop up window does not have fixed size.
- 06:28 PM Bug #9824 (Closed): In Functional/Failure Analysis Click on Hide Fun,Req & Failure & then Show the Fun, Req & Failure & again click on Hide the Fun, Req & Failure & in BOM Section select the System/Component Element then in Failure Analysis section, Empty page is displayed
- 06:28 PM Bug #9824 (Resolved): In Functional/Failure Analysis Click on Hide Fun,Req & Failure & then Show the Fun, Req & Failure & again click on Hide the Fun, Req & Failure & in BOM Section select the System/Component Element then in Failure Analysis section, Empty page is displayed
- 06:15 PM Bug #9817 (Closed): Design VDA: In Failure Analysis do the Fun and Failure Flow Up/Down and Hide the Fun/Requirement Alignment Issue
- 06:03 PM Bug #9816 (Closed): Design VDA: In Failure Analysis Click on Hide Fun and Show Fun, then Fun and Focus Element are getting overlapped
- 06:03 PM Bug #9816 (Resolved): Design VDA: In Failure Analysis Click on Hide Fun and Show Fun, then Fun and Focus Element are getting overlapped
- 05:58 PM Bug #9815 (Closed): Design VDA: In Functional/Failure Analysis Hide the Fun, Req & Failure then Alignment Issue
- 05:58 PM Bug #9815 (Resolved): Design VDA: In Functional/Failure Analysis Hide the Fun, Req & Failure then Alignment Issue
- 05:58 PM Bug #9901 (Closed): Pending or document waiting for approval requests are not displaying for the user when user login through social media
- Pending or document waiting for approval requests are not displaying for the user when user login through social medi...
- 05:55 PM Bug #9814 (Not Resolved): Design VDA: In Failure Analysis Alignment Issue
- 05:52 PM Bug #9813 (Closed): Design VDA: In Functional Analysis Click on Hide Fun & Req and then Show the Fun & Req Switch to Failure Analysis then only the Failure Mode field is displayed and Switch to Functional Analysis view one blank row is displayed
- 05:52 PM Bug #9813 (Resolved): Design VDA: In Functional Analysis Click on Hide Fun & Req and then Show the Fun & Req Switch to Failure Analysis then only the Failure Mode field is displayed and Switch to Functional Analysis view one blank row is displayed
- 05:49 PM Bug #9812 (Closed): Design VDA: In Functional/Failure Analysis while switch to Tree View getting an Server Error
- 05:48 PM Bug #9812 (Resolved): Design VDA: In Functional/Failure Analysis while switch to Tree View getting an Server Error
- 05:47 PM Bug #9811 (Closed): Design VDA:In Functional/Failure Analysis while Show/Hide the Fun, Req & Failure and in BOM section select the System/Component Element then in Functional/Failure Analysis section Fun, Req & Failure is not displayed
- 05:47 PM Bug #9811 (Resolved): Design VDA:In Functional/Failure Analysis while Show/Hide the Fun, Req & Failure and in BOM section select the System/Component Element then in Functional/Failure Analysis section Fun, Req & Failure is not displayed
- 05:41 PM Bug #9810 (Closed): In Functional/Failure Analysis section right click on any branch and choose Delete Branch then JS Error is displayed
- 05:41 PM Bug #9810 (Resolved): In Functional/Failure Analysis section right click on any branch and choose Delete Branch then JS Error is displayed
- 05:39 PM Bug #9808 (Closed): In Functional/Failure Analysis while Creating/inserting the branch getting an JS Error
- 05:39 PM Bug #9808 (Resolved): In Functional/Failure Analysis while Creating/inserting the branch getting an JS Error
- 05:37 PM Bug #9806 (Closed): Design VDA: In Functional Analysis alignment issue
- 05:26 PM Bug #9900 (Closed): Widgets are not displaying in widgets settings based on customization but system displays based on role
- Widgets are not displaying in widgets settings based on customization but system displays based on role need an optio...
- 05:10 PM Bug #9856 (Not Resolved): #24359 - Block Diagram - External element is displayed as Internal when dragging the Scope.
- 05:09 PM Bug #9855 (Closed): #24359 - Block Diagram - When Switching from one icon to other icon, options are not closing automatically
- 05:08 PM Bug #9853 (Not Resolved): US #24359 - Block Diagram - Alert message when external element is dragged inside the Scope is not closing on a Single Click. It is closing only after several click
- 05:08 PM Bug #9893: User Story : 24347 - (IE Browser only) Users - On clicking Profile picture and signature icon it displays pop up window with double scroll bar.
- Displaying double scroll bar while assigning the global process owner in Process-Entity Matrix
- 03:31 PM Bug #9893 (Closed): User Story : 24347 - (IE Browser only) Users - On clicking Profile picture and signature icon it displays pop up window with double scroll bar.
- User Story : 24347 - Users - On clicking Profile picture and signature icon it displays pop up window with double scr...
- 05:07 PM Bug #9851 (Closed): Block Diagram - Options are listed only by clicking on the Arrow. It can be displayed by clicking on the icons
- 05:07 PM Bug #9850 (Closed): After selecting the Line thickness, color of the line is changed automatically and when clicking in grid, line is disappearing.
- 05:06 PM Bug #9899 (Closed): US #24359 - Block Diagram - Menus are not closing when clicking on the Icons repeatedly.
While Clicking on the Connector tools icons, System opens the menu alone. It is not closing the menus.- 05:00 PM Bug #9898 (Closed): Process/Activities - Process scope in Edit process information pop up it is keep on displaying "loading...." message on screen.
- Process/Activities - Process scope in Edit process information pop up it is keep on displaying "loading...." message ...
- 04:56 PM Bug #9840 (Closed): HARA - Published Operational Situation Document could not be viewed while in Operational situation dialog window.(Displays blank page)
- Buttons have been Removed.
- 04:56 PM Bug #9840 (Resolved): HARA - Published Operational Situation Document could not be viewed while in Operational situation dialog window.(Displays blank page)
- 04:55 PM Bug #9838 (Not Resolved): HARA - On Revisiting the Operational Situations page, Selected Operational Situations is displayed as unselected(Refer Description)
- On revisiting for second time it is displayed as Unselected.
- 04:53 PM Bug #9836 (Closed): HARA - After closing the Add/Edit Operational Situations Categories dialog window, Operational Situation dialog window buttons alignment is not good
- Buttons have been Removed.
- 04:53 PM Bug #9836 (Resolved): HARA - After closing the Add/Edit Operational Situations Categories dialog window, Operational Situation dialog window buttons alignment is not good
- 04:51 PM Bug #9835 (Closed): HARA - Drop down fields are not displayed properly after refreshing the Operational Situation Dialog window
- Buttons have been Removed.
- 04:51 PM Bug #9835 (Resolved): HARA - Drop down fields are not displayed properly after refreshing the Operational Situation Dialog window
- 04:51 PM Bug #9834 (Closed): HARA - While creating Effects in Master Table, the latest created effect is displayed in Hazard and Effect Search field.
- 04:50 PM Bug #9896 (Closed): US #24361 - HARA - While creating Effects in Master Table, the latest created effect is automatically displayed in empty rows of Hazard and Effect.
- HARA - While creating Effects in Master Table, the latest created effect is automatically displayed in empty rows of ...
- 04:50 PM Bug #9894: Loading icon - In Entity menu while adding Country, State and city, Entity Type, Business unit, Site Function it is not displaying loading icon on screen.
- Process/Activities page facing the same issue.
- 03:43 PM Bug #9894 (Closed): Loading icon - In Entity menu while adding Country, State and city, Entity Type, Business unit, Site Function it is not displaying loading icon on screen.
- Loading icon - In Entity menu while adding Country, State and city it is not displaying loading icon on screen.
- 04:45 PM Bug #9832 (Closed): HARA – In HARA Document, after clicking Operational Situation button and clicking Refresh button is changing the background HARA document as Operational Situation Document. (Refer Description)
- Buttons have been Removed.
- 04:45 PM Bug #9832 (Resolved): HARA – In HARA Document, after clicking Operational Situation button and clicking Refresh button is changing the background HARA document as Operational Situation Document. (Refer Description)
- Buttons have been Removed.
- 04:43 PM Bug #9830 (Closed): HARA - After Creating a new row in Operational situation window, system creates a New line automatically
- 04:41 PM Bug #9829 (Closed): HARA - While inserting a Row in Categories master table, alignment is not good.
- 04:41 PM Bug #9829 (Resolved): HARA - While inserting a Row in Categories master table, alignment is not good.
- Buttons have been Removed.
- 04:40 PM Bug #9807 (Closed): HARA - Severity and Controllability column are not aligned properly.
- 04:40 PM Bug #9807 (Resolved): HARA - Severity and Controllability column are not aligned properly.
- 04:38 PM Bug #9804 (Closed): HARA - There is no option to Create and Delete Operational Situation in HARA.
- 04:38 PM Bug #9804 (Resolved): HARA - There is no option to Create and Delete Operational Situation in HARA.
- 04:02 PM Bug #9803 (Closed): Block Diagram - Tooltip is displayed as Color, but displays Connector Type where it is not closing when clicking outside.
- 04:02 PM Bug #9803 (Resolved): Block Diagram - Tooltip is displayed as Color, but displays Connector Type where it is not closing when clicking outside.
- 03:59 PM Bug #9802 (Closed): Block Diagram - Tool Icons are not displayed in Block Diagram.
- 03:58 PM Bug #9802 (Resolved): Block Diagram - Tool Icons are not displayed in Block Diagram.
- 03:43 PM Bug #9866 (Resolved): User Story : 24347 - Teams - On clicking Teams menu displaying server error message on screen.
- 03:40 PM Bug #9866 (Open): User Story : 24347 - Teams - On clicking Teams menu displaying server error message on screen.
- 02:51 PM Bug #9891 (Suggestion): Frequently used menus are not displaying when user login underneath the quick links
- Frequently used menus are not displaying when user login underneath the quick links
- 02:47 PM Bug #9890 (Closed): When user set the preference of default module as Audit pro and when clicked on the more options after login displays Suite menus
- When user set the preference of default module as Audit pro and when clicked on the more options after login displays...
- 12:09 PM Bug #9854 (Resolved): JS error displays when user log in through IE browser
- 12:06 PM Bug #9858 (Resolved): Map entity of a newly created audit Program displays Blank
- 12:04 PM Bug #9841 (Resolved): In Social Media layout calendar is not displaying.
- 12:01 PM Bug #9846 (Resolved): System is not allowing to create Checklist
- The Audit topic can be created in the text box that were used to search the Audit topic, if no data found kindly ente...
- 10:20 AM Bug #9879 (Closed): After Creating the route from module the buttons on the top are getting hidden(Social media)
- After Creating the route from module the buttons on the top are getting hidden (Close,maximize,main menu) issue acros...
11/23/2018
- 10:26 PM Bug #9834 (Resolved): HARA - While creating Effects in Master Table, the latest created effect is displayed in Hazard and Effect Search field.
- 09:25 AM Bug #9834 (Open): HARA - While creating Effects in Master Table, the latest created effect is displayed in Hazard and Effect Search field.
- 10:25 PM Bug #9830 (Resolved): HARA - After Creating a new row in Operational situation window, system creates a New line automatically
- 09:25 AM Bug #9830 (Open): HARA - After Creating a new row in Operational situation window, system creates a New line automatically
- 10:25 PM Bug #9838 (Resolved): HARA - On Revisiting the Operational Situations page, Selected Operational Situations is displayed as unselected(Refer Description)
- 09:25 AM Bug #9838 (Open): HARA - On Revisiting the Operational Situations page, Selected Operational Situations is displayed as unselected(Refer Description)
- 09:09 PM Bug #9841 (In Progress): In Social Media layout calendar is not displaying.
- 09:25 AM Bug #9841 (Open): In Social Media layout calendar is not displaying.
- 09:08 PM Bug #9833 (Resolved): D VDA: In Main AQuA Pro For 1 Fun do the Multiple Failure Flow Up & Flow Down and in Failure Analysis Duplicate Failure Flow Up is displayed and in Failure Flow Down only one Failure Flow Down is displayed
- Not on Issues
- 09:25 AM Bug #9833 (Open): D VDA: In Main AQuA Pro For 1 Fun do the Multiple Failure Flow Up & Flow Down and in Failure Analysis Duplicate Failure Flow Up is displayed and in Failure Flow Down only one Failure Flow Down is displayed
- 08:44 PM Bug #9806 (Resolved): Design VDA: In Functional Analysis alignment issue
- 02:56 PM Bug #9806: Design VDA: In Functional Analysis alignment issue
- Please Find the Screenshot attached, Issue is not Resolved.
- 02:55 PM Bug #9806 (Not Fixed with Hotfix): Design VDA: In Functional Analysis alignment issue
- 08:44 PM Bug #9814 (Resolved): Design VDA: In Failure Analysis Alignment Issue
- 05:01 PM Bug #9814 (Not Fixed with Hotfix): Design VDA: In Failure Analysis Alignment Issue
- Issue Not Fixed. Please find the Screenshot attached
- 08:43 PM Bug #9819 (Resolved): D VDA:In Failure Analysis Make Sub-System as Focus Element and do the Fun to Failure Flowup/down and select the System Element and switch to Functional View then Failure Tree Diagram is displayed in Functional Analysis
- 05:13 PM Bug #9819 (Not Fixed with Hotfix): D VDA:In Failure Analysis Make Sub-System as Focus Element and do the Fun to Failure Flowup/down and select the System Element and switch to Functional View then Failure Tree Diagram is displayed in Functional Analysis
- Not Fixed, Kindly find the Screenshot document attached in the mail
- 08:43 PM Bug #9822 (Resolved): D VDA:In Failure Analysis created Multiple Failure in System/Component Element against One Function, while Flow Up/Down the Multiple Failure, Multiple Failure Flow Up/Down is not displaying in the Diagram View
- 01:21 PM Bug #9822 (In Progress): D VDA:In Failure Analysis created Multiple Failure in System/Component Element against One Function, while Flow Up/Down the Multiple Failure, Multiple Failure Flow Up/Down is not displaying in the Diagram View
- 08:41 PM Bug #9848 (Resolved): Blank Alert message displays when selected rank for a checkpoints
- 09:25 AM Bug #9848 (Open): Blank Alert message displays when selected rank for a checkpoints
- 08:41 PM Bug #9849 (Resolved): While changing the score for the checkpoints system displays incorrect validation
- 09:25 AM Bug #9849 (Open): While changing the score for the checkpoints system displays incorrect validation
- 08:16 PM Bug #9856 (Resolved): #24359 - Block Diagram - External element is displayed as Internal when dragging the Scope.
- 09:25 AM Bug #9856 (Open): #24359 - Block Diagram - External element is displayed as Internal when dragging the Scope.
- 08:16 PM Bug #9853 (Resolved): US #24359 - Block Diagram - Alert message when external element is dragged inside the Scope is not closing on a Single Click. It is closing only after several click
- 09:25 AM Bug #9853 (Open): US #24359 - Block Diagram - Alert message when external element is dragged inside the Scope is not closing on a Single Click. It is closing only after several click
- 07:27 PM Bug #9817 (Resolved): Design VDA: In Failure Analysis do the Fun and Failure Flow Up/Down and Hide the Fun/Requirement Alignment Issue
- 05:10 PM Bug #9817 (Not Fixed with Hotfix): Design VDA: In Failure Analysis do the Fun and Failure Flow Up/Down and Hide the Fun/Requirement Alignment Issue
- Not Fixed, kindly find the Screenshot attached
- 06:23 PM Bug #9850 (Resolved): After selecting the Line thickness, color of the line is changed automatically and when clicking in grid, line is disappearing.
- 09:25 AM Bug #9850 (Open): After selecting the Line thickness, color of the line is changed automatically and when clicking in grid, line is disappearing.
- 05:44 PM Bug #9811 (Fixed with Hotfix): Design VDA:In Functional/Failure Analysis while Show/Hide the Fun, Req & Failure and in BOM section select the System/Component Element then in Functional/Failure Analysis section Fun, Req & Failure is not displayed
- 05:42 PM Bug #9813 (Fixed with Hotfix): Design VDA: In Functional Analysis Click on Hide Fun & Req and then Show the Fun & Req Switch to Failure Analysis then only the Failure Mode field is displayed and Switch to Functional Analysis view one blank row is displayed
- 05:34 PM Bug #9878 (Closed): D VDA: Functional Analysis, Function to Function Flow up and Flow Down is not happen
- 05:24 PM Bug #9877 (Closed): The Quick link available for "NC Response Date Extension / Action Owner Change Request Approval (0)" the alignment is not displaying properly.
- The Quick link available for "NC Response Date Extension / Action Owner Change Request Approval (0)" the alignment is...
- 05:21 PM Bug #9824 (Fixed with Hotfix): In Functional/Failure Analysis Click on Hide Fun,Req & Failure & then Show the Fun, Req & Failure & again click on Hide the Fun, Req & Failure & in BOM Section select the System/Component Element then in Failure Analysis section, Empty page is displayed
- 05:20 PM Bug #9857 (Resolved): Label issue in Audit program checklist type displays with THL
- 09:25 AM Bug #9857 (Open): Label issue in Audit program checklist type displays with THL
- 05:17 PM Bug #9876 (Closed): when tried to publish the actual audit document from the publish window is not getting published
- when tried to publish the actual audit document from the publish window is not getting published and also the publish...
- 05:16 PM Bug #9816 (Fixed with Hotfix): Design VDA: In Failure Analysis Click on Hide Fun and Show Fun, then Fun and Focus Element are getting overlapped
- 05:15 PM Bug #9875 (Closed): US #24361 - HARA - When clicking on any of the Search boxes, green color is filled in spaces fields.
- When clicking on any of the Search boxes, green color is filled in spaces fields.
- 05:12 PM Bug #9874 (Closed): Actual audit publish window should be a free window when clicked on the actual audit hyperlink
- Actual audit publish window should be a free window when clicked on the actual audit hyperlink
- 05:08 PM Bug #9815 (Fixed with Hotfix): Design VDA: In Functional/Failure Analysis Hide the Fun, Req & Failure then Alignment Issue
- 05:07 PM Bug #9873 (Closed): Wrong tool tip displays for the tentative status if audit in Audit status page when mouse over
- Wrong tool tip displays for the tentative status if audit in Audit status page when mouse over
- 04:59 PM Bug #9818 (Not Fixed with Hotfix): Design VDA: In Failure Analysis Hide the Req & Failure then alignment issue in Function Field
- Issue not fixed. Please find the Screenshot
- 04:56 PM Bug #9812 (Fixed with Hotfix): Design VDA: In Functional/Failure Analysis while switch to Tree View getting an Server Error
- 04:09 PM Bug #9851 (Resolved): Block Diagram - Options are listed only by clicking on the Arrow. It can be displayed by clicking on the icons
- 04:08 PM Bug #9855 (Resolved): #24359 - Block Diagram - When Switching from one icon to other icon, options are not closing automatically
- 09:25 AM Bug #9855 (Open): #24359 - Block Diagram - When Switching from one icon to other icon, options are not closing automatically
- 04:02 PM Bug #9871 (Closed): When clicked on the hyperlink available in audit status quick link menu displays nc response date extension and action owner change request / audit details page with blank data
- When clicked on the hyperlink available in audit status quick link menu displays nc response date extension and actio...
- 04:01 PM Bug #9870 (Closed): US #24361 - HARA – While adding/removing Safety Goals, Row height is enlarged.
- HARA – While adding/removing Safety Goals, Row height is enlarged
- 04:00 PM Bug #9869 (Closed): Quick link from Audit status when clicked is not loading
- Quick link from Audit status when clicked is not loading
- 03:45 PM Bug #9868 (TBD): LHS menu orders are getting changed for every login
- LHS menus are getting changed for every login (Quick links menus on LHS)
- 03:22 PM Bug #9867 (Closed): US #24361 - HARA - In Operational situation while selecting an Empty rows and Clicking OK button, system does not display any alert message.
- While selecting an Empty rows and Clicking OK button, system does not display any alert message.
- 03:02 PM Bug #9809 (Not Fixed with Hotfix): HARA - Search box alignment is not good in HARA.
- All the search fields must have unique space in between columns.
- 12:33 PM Bug #9809 (Resolved): HARA - Search box alignment is not good in HARA.
- 03:00 PM Bug #9804 (Fixed with Hotfix): HARA - There is no option to Create and Delete Operational Situation in HARA.
- 11:42 AM Bug #9804 (Resolved): HARA - There is no option to Create and Delete Operational Situation in HARA.
- 03:00 PM Bug #9807 (Fixed with Hotfix): HARA - Severity and Controllability column are not aligned properly.
- 11:42 AM Bug #9807 (Resolved): HARA - Severity and Controllability column are not aligned properly.
- 02:59 PM Bug #9810 (Fixed with Hotfix): In Functional/Failure Analysis section right click on any branch and choose Delete Branch then JS Error is displayed
- 02:59 PM Bug #9808 (Fixed with Hotfix): In Functional/Failure Analysis while Creating/inserting the branch getting an JS Error
- 02:57 PM Bug #9829 (Fixed with Hotfix): HARA - While inserting a Row in Categories master table, alignment is not good.
- 11:53 AM Bug #9829 (Resolved): HARA - While inserting a Row in Categories master table, alignment is not good.
- 09:25 AM Bug #9829 (Open): HARA - While inserting a Row in Categories master table, alignment is not good.
- 02:56 PM Bug #9832 (Fixed with Hotfix): HARA – In HARA Document, after clicking Operational Situation button and clicking Refresh button is changing the background HARA document as Operational Situation Document. (Refer Description)
- 12:33 PM Bug #9832 (Resolved): HARA – In HARA Document, after clicking Operational Situation button and clicking Refresh button is changing the background HARA document as Operational Situation Document. (Refer Description)
- 09:25 AM Bug #9832 (Open): HARA – In HARA Document, after clicking Operational Situation button and clicking Refresh button is changing the background HARA document as Operational Situation Document. (Refer Description)
- 02:54 PM Bug #9835 (Fixed with Hotfix): HARA - Drop down fields are not displayed properly after refreshing the Operational Situation Dialog window
- 12:32 PM Bug #9835 (Resolved): HARA - Drop down fields are not displayed properly after refreshing the Operational Situation Dialog window
- 09:25 AM Bug #9835 (Open): HARA - Drop down fields are not displayed properly after refreshing the Operational Situation Dialog window
- 02:53 PM Bug #9836 (Fixed with Hotfix): HARA - After closing the Add/Edit Operational Situations Categories dialog window, Operational Situation dialog window buttons alignment is not good
- 12:32 PM Bug #9836 (Resolved): HARA - After closing the Add/Edit Operational Situations Categories dialog window, Operational Situation dialog window buttons alignment is not good
- 09:25 AM Bug #9836 (Open): HARA - After closing the Add/Edit Operational Situations Categories dialog window, Operational Situation dialog window buttons alignment is not good
- 02:50 PM Bug #9840 (Fixed with Hotfix): HARA - Published Operational Situation Document could not be viewed while in Operational situation dialog window.(Displays blank page)
- 12:30 PM Bug #9840 (Resolved): HARA - Published Operational Situation Document could not be viewed while in Operational situation dialog window.(Displays blank page)
- 09:25 AM Bug #9840 (Open): HARA - Published Operational Situation Document could not be viewed while in Operational situation dialog window.(Displays blank page)
- 02:49 PM Bug #9844 (Fixed with Hotfix): D VDA: Click on Functional/Failure Analysis menu and goto Design FMEA Menu then Fun, Req & Failure Icons are displayed
- 12:23 PM Bug #9844 (Resolved): D VDA: Click on Functional/Failure Analysis menu and goto Design FMEA Menu then Fun, Req & Failure Icons are displayed
- 09:25 AM Bug #9844 (Open): D VDA: Click on Functional/Failure Analysis menu and goto Design FMEA Menu then Fun, Req & Failure Icons are displayed
- 02:47 PM Bug #9866 (Closed): User Story : 24347 - Teams - On clicking Teams menu displaying server error message on screen.
- User Story : 24347 - Teams - On clicking Teams menu displaying server error message on screen.
- 12:49 PM Bug #9862 (Closed): US # 24359 - Block Diagram - Add/Remove elements, Select Context element, Show Interface Type and Publish for Approval Buttons are not working
- Add/Remove elements, Select Context element, Show Interface Type and Publish for Approval Buttons are not working
- 12:45 PM Bug #9861 (Closed): US #24361- HARA – While adding the Blank row from Operational Situation Dialog window, system is duplicating the Operational situation and when opening the Operational situation dialog window, Rows are unchecked.(Refer Steps)
- While adding the Blank row from Operational Situation Dialog window, system is duplicating the Operational situation ...
- 12:36 PM Bug #9860 (Closed): US #24361 - HARA – While selecting/Unselecting Global checkbox on the Header, all the rows are not reflecting
- While selecting/Unselecting Global checkbox on the Header, all the rows are not reflecting
- 09:25 AM Bug #9831 (Open): Operational Situation and HARA - Delete Button is not working in Operational Situation.
- 09:25 AM Bug #9828 (Open): D VDA: In Design FMEA for 1 Function did the Multiple Failure and in Failure Analysis Tree Diagram Failure Flow down is displayed only for 1 Failure
- 09:25 AM Bug #9826 (Open): Space Should be reduced between user icon and User name login date and time when user logs in to system using Social Media
- 09:25 AM Bug #9858 (Open): Map entity of a newly created audit Program displays Blank
- 09:25 AM Bug #9854 (Open): JS error displays when user log in through IE browser
- 09:25 AM Bug #9852 (Open): Session is getting out after clicking on bread crumb of the menu in modules
- 09:25 AM Bug #9847 (Open): D VDA: In Design FMEA Click on the Component Element (Item/ Interface) column getting an JS Error. Please see the Description
- 09:25 AM Bug #9846 (Open): System is not allowing to create Checklist
- 09:25 AM Bug #9845 (Open): D VDA: In Design FMEA add 1 Fun & Failure and do the Flow Down & goto Failure Analysis Menu in Tree Diagram section click on the Context Arrow for two times then Flow Down is not displayed
- 09:25 AM Bug #9843 (Open): Activities tab does not display proper icon for Audit pro module
- 09:25 AM Bug #9842 (Open): For Normal user when login through social media lay out the entity drop down displays Blank
- 09:25 AM Bug #9837 (Open): APQP Actions are not listed in the Action management action for the resource.
11/22/2018
- 09:38 PM Bug #9818 (Resolved): Design VDA: In Failure Analysis Hide the Req & Failure then alignment issue in Function Field
- 01:00 PM Bug #9818 (Open): Design VDA: In Failure Analysis Hide the Req & Failure then alignment issue in Function Field
- 12:20 PM Bug #9818 (Closed): Design VDA: In Failure Analysis Hide the Req & Failure then alignment issue in Function Field
- 09:38 PM Bug #9811 (Resolved): Design VDA:In Functional/Failure Analysis while Show/Hide the Fun, Req & Failure and in BOM section select the System/Component Element then in Functional/Failure Analysis section Fun, Req & Failure is not displayed
- 01:00 PM Bug #9811 (Open): Design VDA:In Functional/Failure Analysis while Show/Hide the Fun, Req & Failure and in BOM section select the System/Component Element then in Functional/Failure Analysis section Fun, Req & Failure is not displayed
- 11:56 AM Bug #9811 (Closed): Design VDA:In Functional/Failure Analysis while Show/Hide the Fun, Req & Failure and in BOM section select the System/Component Element then in Functional/Failure Analysis section Fun, Req & Failure is not displayed
- 09:38 PM Bug #9819 (Resolved): D VDA:In Failure Analysis Make Sub-System as Focus Element and do the Fun to Failure Flowup/down and select the System Element and switch to Functional View then Failure Tree Diagram is displayed in Functional Analysis
- 01:00 PM Bug #9819 (Open): D VDA:In Failure Analysis Make Sub-System as Focus Element and do the Fun to Failure Flowup/down and select the System Element and switch to Functional View then Failure Tree Diagram is displayed in Functional Analysis
- 12:22 PM Bug #9819 (Closed): D VDA:In Failure Analysis Make Sub-System as Focus Element and do the Fun to Failure Flowup/down and select the System Element and switch to Functional View then Failure Tree Diagram is displayed in Functional Analysis
- 09:37 PM Bug #9813 (Resolved): Design VDA: In Functional Analysis Click on Hide Fun & Req and then Show the Fun & Req Switch to Failure Analysis then only the Failure Mode field is displayed and Switch to Functional Analysis view one blank row is displayed
- 01:00 PM Bug #9813 (Open): Design VDA: In Functional Analysis Click on Hide Fun & Req and then Show the Fun & Req Switch to Failure Analysis then only the Failure Mode field is displayed and Switch to Functional Analysis view one blank row is displayed
- 12:10 PM Bug #9813 (Closed): Design VDA: In Functional Analysis Click on Hide Fun & Req and then Show the Fun & Req Switch to Failure Analysis then only the Failure Mode field is displayed and Switch to Functional Analysis view one blank row is displayed
- 08:35 PM Bug #9824 (Resolved): In Functional/Failure Analysis Click on Hide Fun,Req & Failure & then Show the Fun, Req & Failure & again click on Hide the Fun, Req & Failure & in BOM Section select the System/Component Element then in Failure Analysis section, Empty page is displayed
- 01:00 PM Bug #9824 (Open): In Functional/Failure Analysis Click on Hide Fun,Req & Failure & then Show the Fun, Req & Failure & again click on Hide the Fun, Req & Failure & in BOM Section select the System/Component Element then in Failure Analysis section, Empty page is displayed
- 12:49 PM Bug #9824 (Closed): In Functional/Failure Analysis Click on Hide Fun,Req & Failure & then Show the Fun, Req & Failure & again click on Hide the Fun, Req & Failure & in BOM Section select the System/Component Element then in Failure Analysis section, Empty page is displayed
- 06:36 PM Bug #9858 (Closed): Map entity of a newly created audit Program displays Blank
- Map entity of a newly created audit Program displays Blank
- 06:22 PM Bug #9857 (Closed): Label issue in Audit program checklist type displays with THL
- Label issue in Audit program checklist type displays with THL for both the checklist
- 06:10 PM Bug #9802 (Fixed with Hotfix): Block Diagram - Tool Icons are not displayed in Block Diagram.
- 03:56 PM Bug #9802 (Resolved): Block Diagram - Tool Icons are not displayed in Block Diagram.
- 01:00 PM Bug #9802 (Open): Block Diagram - Tool Icons are not displayed in Block Diagram.
- 11:08 AM Bug #9802 (Closed): Block Diagram - Tool Icons are not displayed in Block Diagram.
- Tool Icons are not displayed in Block Diagram.
- 06:10 PM Bug #9803 (Fixed with Hotfix): Block Diagram - Tooltip is displayed as Color, but displays Connector Type where it is not closing when clicking outside.
- 03:56 PM Bug #9803 (Resolved): Block Diagram - Tooltip is displayed as Color, but displays Connector Type where it is not closing when clicking outside.
- 01:00 PM Bug #9803 (Open): Block Diagram - Tooltip is displayed as Color, but displays Connector Type where it is not closing when clicking outside.
- 11:35 AM Bug #9803 (Closed): Block Diagram - Tooltip is displayed as Color, but displays Connector Type where it is not closing when clicking outside.
- Tooltip is displayed as Color, but displays Connector Type where it is not closing when clicking outside.
- 06:08 PM Bug #9856 (Closed): #24359 - Block Diagram - External element is displayed as Internal when dragging the Scope.
- External element is displayed as Internal when dragging the Scope.
- 06:06 PM Bug #9855 (Closed): #24359 - Block Diagram - When Switching from one icon to other icon, options are not closing automatically
- When Switching from one icon to other icon, options are not closing automatically
- 06:04 PM Bug #9815 (Resolved): Design VDA: In Functional/Failure Analysis Hide the Fun, Req & Failure then Alignment Issue
- 01:00 PM Bug #9815 (Open): Design VDA: In Functional/Failure Analysis Hide the Fun, Req & Failure then Alignment Issue
- 12:14 PM Bug #9815 (Closed): Design VDA: In Functional/Failure Analysis Hide the Fun, Req & Failure then Alignment Issue
- 06:04 PM Bug #9854 (Closed): JS error displays when user log in through IE browser
- JS error displays when user log in through IE browser
- 06:04 PM Bug #9853 (Closed): US #24359 - Block Diagram - Alert message when external element is dragged inside the Scope is not closing on a Single Click. It is closing only after several click
- Alert message when external element is dragged inside the Scope is not closing on a Single Click. It is closing only ...
- 06:03 PM Bug #9852 (Closed): Session is getting out after clicking on bread crumb of the menu in modules
- Session is getting out after clicking on bread crumb of the menu in modules
Issue found in IE and chrome - 06:02 PM Bug #9851 (Closed): Block Diagram - Options are listed only by clicking on the Arrow. It can be displayed by clicking on the icons
- Options are listed only by clicking on the Arrow. It can be displayed by clicking on the icons
- 05:58 PM Bug #9850 (Closed): After selecting the Line thickness, color of the line is changed automatically and when clicking in grid, line is disappearing.
- After selecting the Line thickness, color of the line is changed automatically and when clicking in grid, line is dis...
- 05:51 PM Bug #9849 (Closed): While changing the score for the checkpoints system displays incorrect validation
- While changing the score for the checkpoints system displays incorrect validation
- 05:35 PM Bug #9817 (Resolved): Design VDA: In Failure Analysis do the Fun and Failure Flow Up/Down and Hide the Fun/Requirement Alignment Issue
- 01:00 PM Bug #9817 (Open): Design VDA: In Failure Analysis do the Fun and Failure Flow Up/Down and Hide the Fun/Requirement Alignment Issue
- 12:18 PM Bug #9817 (Closed): Design VDA: In Failure Analysis do the Fun and Failure Flow Up/Down and Hide the Fun/Requirement Alignment Issue
- 05:34 PM Bug #9848 (Closed): Blank Alert message displays when selected rank for a checkpoints
- Blank Alert message displays when selected rank for a checkpoints and clicked on save directly without specifying bus...
- 05:28 PM Bug #9847 (Closed): D VDA: In Design FMEA Click on the Component Element (Item/ Interface) column getting an JS Error. Please see the Description
- The Above issue occurs in the below mentioned following columns.
1. Click on 3. Function of Component Element or I... - 05:15 PM Bug #9846 (Closed): System is not allowing to create Checklist
- System is not allowing to create Checklist instead displays alert "Please specify the Audit Topic" where there is no ...
- 05:14 PM Bug #9845 (Closed): D VDA: In Design FMEA add 1 Fun & Failure and do the Flow Down & goto Failure Analysis Menu in Tree Diagram section click on the Context Arrow for two times then Flow Down is not displayed
- D VDA: In Design FMEA add 1 Fun and 1 Failure and in Function of Component Element or Intended Output column select t...
- 05:09 PM Bug #9816 (Resolved): Design VDA: In Failure Analysis Click on Hide Fun and Show Fun, then Fun and Focus Element are getting overlapped
- 01:00 PM Bug #9816 (Open): Design VDA: In Failure Analysis Click on Hide Fun and Show Fun, then Fun and Focus Element are getting overlapped
- 12:16 PM Bug #9816 (Closed): Design VDA: In Failure Analysis Click on Hide Fun and Show Fun, then Fun and Focus Element are getting overlapped
- 05:05 PM Bug #9844 (Closed): D VDA: Click on Functional/Failure Analysis menu and goto Design FMEA Menu then Fun, Req & Failure Icons are displayed
- 04:59 PM Bug #9843 (Closed): Activities tab does not display proper icon for Audit pro module
- Activities tab does not display proper icon for Audit pro module
- 04:10 PM Bug #9810 (Resolved): In Functional/Failure Analysis section right click on any branch and choose Delete Branch then JS Error is displayed
- 01:00 PM Bug #9810 (Open): In Functional/Failure Analysis section right click on any branch and choose Delete Branch then JS Error is displayed
- 11:54 AM Bug #9810 (Closed): In Functional/Failure Analysis section right click on any branch and choose Delete Branch then JS Error is displayed
- 04:10 PM Bug #9808 (Resolved): In Functional/Failure Analysis while Creating/inserting the branch getting an JS Error
- 01:00 PM Bug #9808 (Open): In Functional/Failure Analysis while Creating/inserting the branch getting an JS Error
- 11:52 AM Bug #9808 (Closed): In Functional/Failure Analysis while Creating/inserting the branch getting an JS Error
- 04:01 PM Bug #9842 (Closed): For Normal user when login through social media lay out the entity drop down displays Blank
- For Normal user when login through social media lay out the entity drop down displays Blank
- 03:58 PM Bug #9841 (Closed): In Social Media layout calendar is not displaying.
- In Social Media layout calendar is not displaying properly some times system displays server error
- 03:51 PM Bug #9840 (Closed): HARA - Published Operational Situation Document could not be viewed while in Operational situation dialog window.(Displays blank page)
- Published Operational Situation Document could not be viewed while in Operational situation dialog window.
- 03:40 PM Bug #9839 (Closed): Operational Situation - After entering Data, it can be created by pressing Enter key also.
- After entering Data, it can be created by pressing Enter key also.
- 03:34 PM Bug #9838 (Closed): HARA - On Revisiting the Operational Situations page, Selected Operational Situations is displayed as unselected(Refer Description)
- On Revisiting the Operational Situations page, Selected Operational Situations is displayed as unselected.
When sele... - 03:34 PM Bug #9837 (Closed): APQP Actions are not listed in the Action management action for the resource.
- APQP Actions are not listed in the Action management action for the resource.
- 03:23 PM Bug #9836 (Closed): HARA - After closing the Add/Edit Operational Situations Categories dialog window, Operational Situation dialog window buttons alignment is not good
- After closing the Add/Edit Operational Situations Categories dialog window, Operational Situation dialog window butto...
- 03:21 PM Bug #9835 (Closed): HARA - Drop down fields are not displayed properly after refreshing the Operational Situation Dialog window
- Drop down fields are not displayed properly after refreshing the Operational Situation Dialog window
- 03:13 PM Bug #9834 (Closed): HARA - While creating Effects in Master Table, the latest created effect is displayed in Hazard and Effect Search field.
- While creating Effects in Master Table, the latest created effect is displayed in Hazard and Effect Search field.
- 03:10 PM Bug #9833 (Closed): D VDA: In Main AQuA Pro For 1 Fun do the Multiple Failure Flow Up & Flow Down and in Failure Analysis Duplicate Failure Flow Up is displayed and in Failure Flow Down only one Failure Flow Down is displayed
- 03:09 PM Bug #9832 (Closed): HARA – In HARA Document, after clicking Operational Situation button and clicking Refresh button is changing the background HARA document as Operational Situation Document. (Refer Description)
- HARA – In HARA Document, after clicking Operational Situation button and clicking Refresh button is changing the back...
- 03:05 PM Bug #9831 (Closed): Operational Situation and HARA - Delete Button is not working in Operational Situation.
- Delete Button is not working in Operational Situation.
- 03:02 PM Bug #9830 (Closed): HARA - After Creating a new row in Operational situation window, system creates a New line automatically
- After Creating a new row in Operational situation window(Both in HARA and Operational Situation), system creates a Ne...
- 02:58 PM Bug #9829 (Closed): HARA - While inserting a Row in Categories master table, alignment is not good.
- While inserting a Row in Categories master table, alignment is not good.
- 02:53 PM Bug #9828 (Closed): D VDA: In Design FMEA for 1 Function did the Multiple Failure and in Failure Analysis Tree Diagram Failure Flow down is displayed only for 1 Failure
- 02:53 PM Bug #9827 (Closed): HARA - While adding Exposure value, alert displayed is not good.
- While adding Exposure value, alert displayed is not good.
Expected Result: Capital letters can be replaced with sm... - 02:52 PM Bug #9826 (Closed): Space Should be reduced between user icon and User name login date and time when user logs in to system using Social Media
- Space Should be reduced between user icon and User name login date and time when user logs in to system using Social ...
- 01:04 PM Bug #9814 (Resolved): Design VDA: In Failure Analysis Alignment Issue
- 01:00 PM Bug #9814 (Open): Design VDA: In Failure Analysis Alignment Issue
- 12:12 PM Bug #9814 (Closed): Design VDA: In Failure Analysis Alignment Issue
- 01:04 PM Bug #9812 (Resolved): Design VDA: In Functional/Failure Analysis while switch to Tree View getting an Server Error
- 01:00 PM Bug #9812 (Open): Design VDA: In Functional/Failure Analysis while switch to Tree View getting an Server Error
- 11:57 AM Bug #9812 (Closed): Design VDA: In Functional/Failure Analysis while switch to Tree View getting an Server Error
- 01:03 PM Bug #9806 (Resolved): Design VDA: In Functional Analysis alignment issue
- 01:00 PM Bug #9806 (Open): Design VDA: In Functional Analysis alignment issue
- 11:49 AM Bug #9806 (Closed): Design VDA: In Functional Analysis alignment issue
- 01:00 PM Bug #9822 (Open): D VDA:In Failure Analysis created Multiple Failure in System/Component Element against One Function, while Flow Up/Down the Multiple Failure, Multiple Failure Flow Up/Down is not displaying in the Diagram View
- 12:31 PM Bug #9822 (Closed): D VDA:In Failure Analysis created Multiple Failure in System/Component Element against One Function, while Flow Up/Down the Multiple Failure, Multiple Failure Flow Up/Down is not displaying in the Diagram View
- 01:00 PM Bug #9821 (Open): D VDA: In Functional/Failure Analysis while adding the Multiple Req/Failure the new Row is getting inserted in the Second Row
- 12:27 PM Bug #9821 (Closed): D VDA: In Functional/Failure Analysis while adding the Multiple Req/Failure the new Row is getting inserted in the Second Row
- 01:00 PM Bug #9820 (Open): D VDA: In Failure Analysis without Req did the Failure Flow up/Down and click on Flow up/Down Indicator, in pop up window Requirement Check box is checked
- 12:25 PM Bug #9820 (Closed): D VDA: In Failure Analysis without Req did the Failure Flow up/Down and click on Flow up/Down Indicator, in pop up window Requirement Check box is checked
- 01:00 PM Bug #9809 (Open): HARA - Search box alignment is not good in HARA.
- 11:52 AM Bug #9809 (Closed): HARA - Search box alignment is not good in HARA.
- Search box alignment is not good in HARA.
- 01:00 PM Bug #9807 (Open): HARA - Severity and Controllability column are not aligned properly.
- 11:50 AM Bug #9807 (Closed): HARA - Severity and Controllability column are not aligned properly.
- Severity and controllability column are not aligned properly.
- 01:00 PM Bug #9805 (Open): When saving the remainder settings under escalation routes it shows error.(Not able to save route).
- 11:45 AM Bug #9805 (Closed): When saving the remainder settings under escalation routes it shows error.(Not able to save route).
- When saving the remainder settings under escalation routes it shows error.(Not able to save route).
- 01:00 PM Bug #9804 (Open): HARA - There is no option to Create and Delete Operational Situation in HARA.
- 11:38 AM Bug #9804 (Closed): HARA - There is no option to Create and Delete Operational Situation in HARA.
- There is no option to Create and Delete Operational Situation in HARA.
Also available in: Atom