Activity
From 02/26/2021 to 03/27/2021
03/26/2021
- 07:28 PM Bug #21960 (Closed): HARA - While creating a new operational Situation, system allows to enter E1 and E2 values directly without any alert.
- Also it is allowed to use in the HARA and FSR also.
In Operational Situation page it works fine. - 07:19 PM Bug #21916 (Closed): HARA - While creating a new operational Situation name, system hangs.
- 07:19 PM Bug #21916 (Resolved): HARA - While creating a new operational Situation name, system hangs.
- 07:15 PM Bug #21911 (Closed): FSR - While doing Add ASIl option, Asil value is not displayed but it is applied in the cells.
- 07:15 PM Bug #21911 (Resolved): FSR - While doing Add ASIl option, Asil value is not displayed but it is applied in the cells.
- 07:10 PM Bug #21908 (Closed): VOC - If an non-standard HARA ASIL is allocated to a child element in FSR document, it is not displyed in the VOC of that child element.
- 07:10 PM Bug #21908 (Resolved): VOC - If an non-standard HARA ASIL is allocated to a child element in FSR document, it is not displyed in the VOC of that child element.
- 07:07 PM Bug #21872 (Closed): DFMEA - While switching From and To DFMEA menu from any other menu, system redirects the Focus element to Global or blank.(Refer Description)
- 07:07 PM Bug #21872 (Resolved): DFMEA - While switching From and To DFMEA menu from any other menu, system redirects the Focus element to Global or blank.(Refer Description)
- 06:49 PM Bug #21663 (Closed): Production item Table - Unable to scroll down till the last PI. Also Horizontal scrollbar is not visible in PI table. (Refer Description)
- 06:47 PM Bug #21704 (Not Resolved): PI/Item Element(BOM) Creation - Production item Type and Category is not working properly while creating Item Element. (Refer Description)
- 06:47 PM Bug #21704 (Resolved): PI/Item Element(BOM) Creation - Production item Type and Category is not working properly while creating Item Element. (Refer Description)
- • After changing the Type to Manufactured again and Clicking on Create option, it is created as Purchased only.
• ... - 06:47 PM Bug #21628 (Closed): Not allowing to remove the requirement type selected from the VOC
- 06:28 PM Bug #21874 (Closed): IFM & Item Boundaries - Different behavioral issues occurs in Item boundaries and IFM of RFD module alone. (Refer Description)
- 06:27 PM Bug #21874 (Resolved): IFM & Item Boundaries - Different behavioral issues occurs in Item boundaries and IFM of RFD module alone. (Refer Description)
- 06:27 PM Bug #21875 (Closed): Combined Interface Matrix page is not loading
- 06:18 PM Bug #21959 (Closed): P-DIagram is displayed without any connectors
- Issue occurs in RFD/FST/VDA
- 04:05 PM Bug #21958 (Closed): Review Points:Space and alignment issue across the module(Grids are not fit to window).
- Review Points:Space and alignment issue across the module(Grids are not fit to window).
- 04:03 PM Feature/Enhancement #21957 (Open): Review Points:Need an option to create part inside supplier portal
- Review Points:Need an option to create part inside supplier portal
- 04:02 PM Feature/Enhancement #21956 (Open): Review Points:Include Part revision option:- Need an additional field for part to include rev number
- Review Points:Include Part revision option:- Need an additional field for part to include rev number
- 04:01 PM Bug #21955 (Closed): Review Points:The color code for the separators(split window) need to be common across module
- Review Points:The color code for the separators(split window) need to be common across module
- 04:00 PM Bug #21954 (Closed): Review points:SAM/SEM page: a)Multiple scroll bars needs to be minimized b)Calendar is not visible completely( need to scroll).
- Review points:SAM/SEM page: a)Multiple scroll bars needs to be minimized b)Calendar is not visible completely( n...
- 02:34 PM Bug #21953 (Closed): Yes/No button still in old theme in VAM Do you want to repeat audit? dialogue box
- Yes/No button still in old theme in VAM Do you want to repeat audit? dialogue box
- 02:07 PM Bug #21952 (Closed): Requirement review- After Stopping a group review the review summary menu is disabled,hence not able to view the summary details
- Requirement review- After Stopping a group review the review summary menu is disabled,hence not able to view the summ...
- 01:07 PM Bug #21660: Internal issue list- Consolidated list of issues discussed internally
- Cycle 6 Status:
*Select/enter requirement against a function and change the requirement at the same time, after re... - 01:02 PM Bug #21950 (Closed): FST- Action Menu is missing inthe module
- FST- Action Menu is missing inthe module
- 01:01 PM Bug #21858 (Closed): Issue with stopping a requirement sent for review from group of rquirements(Refer Description)
- Reported Issue Fixed- But not able to view review summary after stopping
- 11:12 AM Bug #21849 (Closed): Update competency - The requirement which is updated is not showing in the update competency and job requirements page. Refer screenshot
- 11:09 AM Bug #21850 (Closed): In shop floor user popup showing two scrolls. Refer screenshot
- 10:30 AM Bug #21853 (Closed): Maximize button is not displayed for the popup window in the gantt page - Impact of label issue fix
03/25/2021
- 09:08 PM Reports #21871 (Closed): Cummins New & Existing Reports -> Getting query execution failed error while clicking on report link from menu
- Closed in CY6 build
- 05:22 PM Bug #21851 (Closed): Main2: In all the Documents, One Header size displaying with big in size (New Issue facing in this Build only)
- 05:17 PM Bug #21640 (Closed): AQuA-Doc Published Document View and Hyperlink View is not working
- 04:59 PM Bug #21947 (Closed): The uploaded document in any page in hrpro the font size is changed after the upload. Refer screenshot
- The uploaded document in any page in hrpro the font size is changed after the upload. Refer screenshot
- 04:16 PM Bug #21848 (Closed): In New Concern page, after submitting the concern the concern s=details r not listing in the grid, shows empty grid.
- 01:22 PM Bug #21848 (Resolved): In New Concern page, after submitting the concern the concern s=details r not listing in the grid, shows empty grid.
- 03:50 PM Bug #21798 (Not Resolved): Cant able to save concern Forms
- 02:34 PM Bug #21946 (Closed): Cursor is always blinking in site listing field.Please refer screen shot
- Cursor is always blinking in site listing field.Please refer screen shot
- 02:32 PM Bug #21945 (Closed): VEM/VAM schedule audit->Save button should be in right side bottom of the page.(now it is in top of the screen)
- VEM/VAM schedule audit->Save button should be in right side bottom of the page.(now it is in top of the screen)
03/24/2021
- 08:54 PM Feature/Enhancement #21611 (Fixed in Dev): Issues in BOSS - Meetings Email
- 08:22 PM Bug #21704 (Fixed with Hotfix): PI/Item Element(BOM) Creation - Production item Type and Category is not working properly while creating Item Element. (Refer Description)
- 08:22 PM Bug #21704 (Fixed in Dev): PI/Item Element(BOM) Creation - Production item Type and Category is not working properly while creating Item Element. (Refer Description)
- 07:40 PM Bug #21543 (Resolved): While Viewing Concern Data Report Shows Error (New In this Build)
- 07:37 PM Bug #21884 (Fixed in Dev): Notification List: Clicking on the action list from the Notification popup is showing as ACCESS DENIED.
- 06:54 PM Bug #21891: Responsiveness Related issues
- can't fix this issue at this time of bcz table is related to document publish
- 06:43 PM Bug #21937 (Resolved): Responsive View: Doc Mngmt extra bar above move and reset
- 06:43 PM Bug #21937 (Open): Responsive View: Doc Mngmt extra bar above move and reset
- 06:40 PM Bug #21937: Responsive View: Doc Mngmt extra bar above move and reset
- its not extra bar its nonediable textbar to show selected level name
- 06:32 PM Bug #21937 (Closed): Responsive View: Doc Mngmt extra bar above move and reset
- Responsive View: Doc Mngmt extra bar above move and reset
- 06:43 PM Feature/Enhancement #21938 (Open): Responsive View : Action/Admin Action - Page alignment is not good
- 06:33 PM Feature/Enhancement #21938 (Open): Responsive View : Action/Admin Action - Page alignment is not good
- Responsive View : Action/Admin Action - Page alignment is not good
- 06:43 PM Feature/Enhancement #21936 (Open): Responsive View :.Document Template- Desgin is not properly aligned
- 06:31 PM Feature/Enhancement #21936 (Open): Responsive View :.Document Template- Desgin is not properly aligned
- Responsive View :.Document Template- Desgin is not properly aligned
- 06:43 PM Feature/Enhancement #21935 (Open): Responsive View : Folder and Document Management Rights for Site/Groups/Users - Screen is overlapped
- 06:29 PM Feature/Enhancement #21935 (Open): Responsive View : Folder and Document Management Rights for Site/Groups/Users - Screen is overlapped
- Responsive View : Folder and Document Management Rights for Site/Groups/Users - Screen is overlapped
- 06:43 PM Feature/Enhancement #21934 (Open): Responsiveness Related issues :Side menu bar is not working as expected and when side menu is enabled its overlaping the folder management level structure (Refer Screenshot 1,2)
- 06:28 PM Feature/Enhancement #21934 (Open): Responsiveness Related issues :Side menu bar is not working as expected and when side menu is enabled its overlaping the folder management level structure (Refer Screenshot 1,2)
- Responsiveness Related issues
1.Side menu bar is not working as expected and when side menu is enabled its overlapin... - 12:27 PM Bug #21851 (Resolved): Main2: In all the Documents, One Header size displaying with big in size (New Issue facing in this Build only)
- 12:26 PM Bug #21880 (Resolved): Security Definitions New: Users Pop-Up window doesn't have Done Button so we can't select the User for Set Security (QA Missed)
- 12:05 PM Bug #21663 (Resolved): Production item Table - Unable to scroll down till the last PI. Also Horizontal scrollbar is not visible in PI table. (Refer Description)
- Issue fixed in Chrome browser. But in Mozilla it is not fixed.
As discussed with rengaraj, this will be handled in... - 11:41 AM Bug #21875 (Resolved): Combined Interface Matrix page is not loading
- Issue occurs whenever there is a blank data created in Global. After deleting the blank row, it works fine.
- 11:28 AM Bug #21874 (Fixed with Hotfix): IFM & Item Boundaries - Different behavioral issues occurs in Item boundaries and IFM of RFD module alone. (Refer Description)
- 11:28 AM Bug #21874 (Fixed in Dev): IFM & Item Boundaries - Different behavioral issues occurs in Item boundaries and IFM of RFD module alone. (Refer Description)
- 11:19 AM Bug #21779 (Fixed in Dev): Publish: Set Keyword(s) is not working for the Existing Published Documents (QA Missed)
- 10:41 AM Bug #21858 (Resolved): Issue with stopping a requirement sent for review from group of rquirements(Refer Description)
- 10:39 AM Bug #21628 (Resolved): Not allowing to remove the requirement type selected from the VOC
- 10:20 AM Bug #21844 (Resolved): In Landing page dashboard, there is no Date filter, because of that reports are not displaying properly
03/23/2021
- 09:43 PM Bug #21835 (Fixed with Hotfix): FTA - Following issues occurs in FTA and FMEDA(Refer Description and Screenshots)
- 09:43 PM Bug #21835 (Fixed in Dev): FTA - Following issues occurs in FTA and FMEDA(Refer Description and Screenshots)
- 07:17 PM Bug #21851 (Fixed with Hotfix): Main2: In all the Documents, One Header size displaying with big in size (New Issue facing in this Build only)
- 07:17 PM Bug #21880 (Fixed with Hotfix): Security Definitions New: Users Pop-Up window doesn't have Done Button so we can't select the User for Set Security (QA Missed)
- 07:17 PM Bug #21880 (Fixed in Dev): Security Definitions New: Users Pop-Up window doesn't have Done Button so we can't select the User for Set Security (QA Missed)
- 05:36 PM Bug #21663 (Fixed with Hotfix): Production item Table - Unable to scroll down till the last PI. Also Horizontal scrollbar is not visible in PI table. (Refer Description)
- 05:36 PM Bug #21663 (Fixed in Dev): Production item Table - Unable to scroll down till the last PI. Also Horizontal scrollbar is not visible in PI table. (Refer Description)
- 04:10 PM Bug #21779: Publish: Set Keyword(s) is not working for the Existing Published Documents (QA Missed)
- Need to include the 10.3.0.3 change
- 11:10 AM Bug #21926 (Closed): Expectation category - When click new and enter data in the text field and click enter it shows "already exists". Refer screenshot
- Expectation category - When click new and enter data in the text field and click enter it shows "already exists". Ref...
03/22/2021
- 07:00 PM Bug #21907 (Fixed in Dev): Inspection Entry Popup: View documents: Error occurs when clicking on the document to view(Occurs only when the attachments are added from Doc Pro)
- 11:44 AM Bug #21907 (Open): Inspection Entry Popup: View documents: Error occurs when clicking on the document to view(Occurs only when the attachments are added from Doc Pro)
- 06:59 PM Bug #21903 (Fixed in Dev): Inspection Form Standard:Data is not saved when the PI, template and attach documents alone are added. There is no response. PI Popup: Search and selection is not working as expected
- 05:16 PM Bug #21916 (Fixed with Hotfix): HARA - While creating a new operational Situation name, system hangs.
- 05:16 PM Bug #21916 (Fixed in Dev): HARA - While creating a new operational Situation name, system hangs.
- 11:44 AM Bug #21916 (Open): HARA - While creating a new operational Situation name, system hangs.
- 03:37 PM Bug #21908 (Fixed with Hotfix): VOC - If an non-standard HARA ASIL is allocated to a child element in FSR document, it is not displyed in the VOC of that child element.
- 03:37 PM Bug #21908 (Fixed in Dev): VOC - If an non-standard HARA ASIL is allocated to a child element in FSR document, it is not displyed in the VOC of that child element.
- 11:44 AM Bug #21908 (Open): VOC - If an non-standard HARA ASIL is allocated to a child element in FSR document, it is not displyed in the VOC of that child element.
- 02:12 PM Bug #21849 (Resolved): Update competency - The requirement which is updated is not showing in the update competency and job requirements page. Refer screenshot
- 12:43 PM Bug #21858 (Fixed with Hotfix): Issue with stopping a requirement sent for review from group of rquirements(Refer Description)
- 12:43 PM Bug #21858 (Fixed in Dev): Issue with stopping a requirement sent for review from group of rquirements(Refer Description)
- 11:44 AM Bug #21915 (Open): Suite Level and Folder Management: Search is working only when the folder is activated in site levels
- 11:24 AM Bug #21911 (Fixed with Hotfix): FSR - While doing Add ASIl option, Asil value is not displayed but it is applied in the cells.
- 11:24 AM Bug #21911 (Fixed in Dev): FSR - While doing Add ASIl option, Asil value is not displayed but it is applied in the cells.
- 11:24 AM Bug #21911 (Open): FSR - While doing Add ASIl option, Asil value is not displayed but it is applied in the cells.
- 10:23 AM Bug #21852 (Resolved): When the levels are in alphabets then for 3 and 5 it is showing the color codes in the legend name also.
- 10:23 AM Bug #21852 (Fixed in Dev): When the levels are in alphabets then for 3 and 5 it is showing the color codes in the legend name also.
- 09:45 AM Bug #21879 (Resolved): Suite : Initiate Concern from meetings action plan when clicked displays "Access Denied"
- Got the patches from RK and Pathan verified this issue so moving to resovled
- 09:25 AM Bug #21640 (Resolved): AQuA-Doc Published Document View and Hyperlink View is not working
- 09:09 AM Bug #21853 (Resolved): Maximize button is not displayed for the popup window in the gantt page - Impact of label issue fix
03/19/2021
- 09:34 PM Bug #21916 (Closed): HARA - While creating a new operational Situation name, system hangs.
- Unable to access any menu after creating a new operational situation in HARA
- 08:23 PM Bug #21557 (Resolved): Reports: Draft Index : Error occurs
- 08:23 PM Bug #21557 (Fixed in Dev): Reports: Draft Index : Error occurs
- 08:23 PM Bug #21832 (Resolved): HRPro Reports are not working
- 08:23 PM Bug #21832 (Fixed in Dev): HRPro Reports are not working
- 07:58 PM Bug #21915 (Closed): Suite Level and Folder Management: Search is working only when the folder is activated in site levels
- Suite Level and Folder Management: Search is working only when the folder is activated in site levels
- 05:22 PM Bug #21911 (Closed): FSR - While doing Add ASIl option, Asil value is not displayed but it is applied in the cells.
- While doing Add ASIl option, Asil value is not displayed.
- 02:54 PM Bug #21908 (Closed): VOC - If an non-standard HARA ASIL is allocated to a child element in FSR document, it is not displyed in the VOC of that child element.
- But standard HARA ASIL is displayed properly.
- 01:48 PM Bug #21907 (Closed): Inspection Entry Popup: View documents: Error occurs when clicking on the document to view(Occurs only when the attachments are added from Doc Pro)
- Inspection Entry Popup: View documents: Error occurs when clicking on the document to view(Occurs only when the attac...
- 12:00 PM Bug #21850 (Resolved): In shop floor user popup showing two scrolls. Refer screenshot
- 11:59 AM Bug #21850 (Fixed with Hotfix): In shop floor user popup showing two scrolls. Refer screenshot
- 11:59 AM Bug #21850 (Fixed in Dev): In shop floor user popup showing two scrolls. Refer screenshot
- 10:42 AM Bug #21903 (Open): Inspection Form Standard:Data is not saved when the PI, template and attach documents alone are added. There is no response. PI Popup: Search and selection is not working as expected
- 10:42 AM Feature/Enhancement #21898 (Open): The landing page dashboard widgets are not showing in landing page. When having all the module rights
- 10:42 AM Bug #21891 (Open): Responsiveness Related issues
- 10:42 AM Bug #21884 (Open): Notification List: Clicking on the action list from the Notification popup is showing as ACCESS DENIED.
03/18/2021
- 07:27 PM Bug #21859 (Fixed with Hotfix): Focus Element Context element selection dropdown
- 07:10 PM Bug #21875 (Fixed with Hotfix): Combined Interface Matrix page is not loading
- 03:54 PM Bug #21875: Combined Interface Matrix page is not loading
- Fixed with Hotfix
- 07:10 PM Bug #21628 (Fixed with Hotfix): Not allowing to remove the requirement type selected from the VOC
- 07:10 PM Bug #21872 (Fixed with Hotfix): DFMEA - While switching From and To DFMEA menu from any other menu, system redirects the Focus element to Global or blank.(Refer Description)
- 06:36 PM Bug #21631 (Closed): Incorrect data showing on selecting inserted columns from groupby option For Design Requirement type
- 06:36 PM Bug #21631: Incorrect data showing on selecting inserted columns from groupby option For Design Requirement type
- Issue Fixed as HF in Cy-5
- 06:33 PM Bug #21814 (Closed): Design VDA - Requirements and Failures are shown in a same level in Tree/Table view
- 04:56 PM Bug #21903 (Closed): Inspection Form Standard:Data is not saved when the PI, template and attach documents alone are added. There is no response. PI Popup: Search and selection is not working as expected
- Inspection Form Standard: Data is not saved when the PI, template and attach documents alone are added. There is no r...
- 03:02 PM Feature/Enhancement #21898 (Open): The landing page dashboard widgets are not showing in landing page. When having all the module rights
- The landing page dashboard widgets are not showing in landing page.When having all the module rights
- 02:36 PM Bug #21850 (Not Fixed with Hotfix): In shop floor user popup showing two scrolls. Refer screenshot
- Not fixed
In training request
2.Training request shop floor user selection page - 01:58 PM Bug #21850 (Fixed with Hotfix): In shop floor user popup showing two scrolls. Refer screenshot
- 01:58 PM Bug #21849 (Fixed with Hotfix): Update competency - The requirement which is updated is not showing in the update competency and job requirements page. Refer screenshot
03/17/2021
- 07:56 PM Bug #21891 (Closed): Responsiveness Related issues
- Responsiveness Related issues
6.New Doc Request - After attaching documents the grids are hiding no scroll is there - 06:41 PM Bug #21859 (Fixed in Dev): Focus Element Context element selection dropdown
- 05:26 PM Bug #21875 (Fixed in Dev): Combined Interface Matrix page is not loading
- 10:44 AM Bug #21875 (Open): Combined Interface Matrix page is not loading
- 05:03 PM Bug #21884 (Closed): Notification List: Clicking on the action list from the Notification popup is showing as ACCESS DENIED.
- 04:06 PM Bug #21847 (Closed): The training which is created with days in training setup is showing in calendar
- 02:14 PM Bug #21849 (Fixed in Dev): Update competency - The requirement which is updated is not showing in the update competency and job requirements page. Refer screenshot
- 01:15 PM Bug #21872 (Fixed in Dev): DFMEA - While switching From and To DFMEA menu from any other menu, system redirects the Focus element to Global or blank.(Refer Description)
- 10:44 AM Bug #21872 (Open): DFMEA - While switching From and To DFMEA menu from any other menu, system redirects the Focus element to Global or blank.(Refer Description)
- 12:19 PM Bug #21628 (Fixed in Dev): Not allowing to remove the requirement type selected from the VOC
- 11:04 AM Bug #21796 (Fixed in Dev): Expectation category - When click new it shows access denied.
- 10:44 AM Bug #21880 (Open): Security Definitions New: Users Pop-Up window doesn't have Done Button so we can't select the User for Set Security (QA Missed)
- 10:44 AM Bug #21879 (Open): Suite : Initiate Concern from meetings action plan when clicked displays "Access Denied"
- 10:44 AM Bug #21874 (Open): IFM & Item Boundaries - Different behavioral issues occurs in Item boundaries and IFM of RFD module alone. (Refer Description)
- 10:34 AM Bug #21631 (Resolved): Incorrect data showing on selecting inserted columns from groupby option For Design Requirement type
- 10:34 AM Bug #21631 (Fixed in Dev): Incorrect data showing on selecting inserted columns from groupby option For Design Requirement type
03/16/2021
- 11:01 PM Bug #21880 (Closed): Security Definitions New: Users Pop-Up window doesn't have Done Button so we can't select the User for Set Security (QA Missed)
- Security Definitions New: Users Pop-Up window doesn't have Done Button so we can't select the User for Set Security (...
- 08:34 PM Bug #21631 (Not Resolved): Incorrect data showing on selecting inserted columns from groupby option For Design Requirement type
- Same behavior is still showing after grouping the Design Requirement column created in VOC.
- 08:30 PM Bug #21628 (Not Resolved): Not allowing to remove the requirement type selected from the VOC
- The requirement type is not removing for some VOC rows. On changing the type to select it is not saving on refresh sh...
- 06:34 PM Bug #21879 (Closed): Suite : Initiate Concern from meetings action plan when clicked displays "Access Denied"
- Initiate Concern from meetings action plan when clicked displays "Access Denied"
- 04:28 PM Bug #21847 (Resolved): The training which is created with days in training setup is showing in calendar
- 04:28 PM Bug #21847 (Fixed in Dev): The training which is created with days in training setup is showing in calendar
- Not an issue working as per requirement
- 11:36 AM Bug #21847 (Open): The training which is created with days in training setup is showing in calendar
- 01:44 PM Reports #21871: Cummins New & Existing Reports -> Getting query execution failed error while clicking on report link from menu
- Its fixed with Hotfix after CY5 build
- 11:05 AM Reports #21871 (Resolved): Cummins New & Existing Reports -> Getting query execution failed error while clicking on report link from menu
- 11:05 AM Reports #21871 (Open): Cummins New & Existing Reports -> Getting query execution failed error while clicking on report link from menu
- 10:42 AM Reports #21871 (Closed): Cummins New & Existing Reports -> Getting query execution failed error while clicking on report link from menu
- Cummins New & Existing Reports -> Getting table mismatching error while clicking on report link from menu
1. LPA –... - 01:43 PM Bug #21875 (Closed): Combined Interface Matrix page is not loading
- Combined Interface Matrix page is not loading
- 01:40 PM Bug #21874 (Closed): IFM & Item Boundaries - Different behavioral issues occurs in Item boundaries and IFM of RFD module alone. (Refer Description)
- Item Boundaries - Unable to Add or remove items using Add/Remove Elements
IFM - Changes made in IFM is not reflec... - 01:37 PM Bug #21850 (Fixed in Dev): In shop floor user popup showing two scrolls. Refer screenshot
- 11:36 AM Bug #21850 (Open): In shop floor user popup showing two scrolls. Refer screenshot
- 12:26 PM Bug #21872 (Closed): DFMEA - While switching From and To DFMEA menu from any other menu, system redirects the Focus element to Global or blank.(Refer Description)
- While switching From DFMEA menu to any other menu, system redirects the Focus element to blank.
While switching Fr... - 11:36 AM Bug #21859 (Open): Focus Element Context element selection dropdown
- 11:36 AM Bug #21858 (Open): Issue with stopping a requirement sent for review from group of rquirements(Refer Description)
- 11:36 AM Bug #21853 (Open): Maximize button is not displayed for the popup window in the gantt page - Impact of label issue fix
- 11:36 AM Bug #21849 (Open): Update competency - The requirement which is updated is not showing in the update competency and job requirements page. Refer screenshot
- 11:36 AM Bug #21848 (Open): In New Concern page, after submitting the concern the concern s=details r not listing in the grid, shows empty grid.
- 11:36 AM Bug #21844 (Open): In Landing page dashboard, there is no Date filter, because of that reports are not displaying properly
- 11:36 AM Bug #21852 (Open): When the levels are in alphabets then for 3 and 5 it is showing the color codes in the legend name also.
03/15/2021
- 10:21 AM Bug #21813 (Closed): Pandora DB- The level structure is not displaying in Document TOC
- 10:20 AM Bug #21813: Pandora DB- The level structure is not displaying in Document TOC
- Patch has been given after the build,, since its not replicating in pandora staging, cant include the fix inside the ...
- 10:19 AM Bug #21813 (Resolved): Pandora DB- The level structure is not displaying in Document TOC
- 10:18 AM Bug #21813 (Fixed in Dev): Pandora DB- The level structure is not displaying in Document TOC
- 10:15 AM Bug #21813 (Not Resolved): Pandora DB- The level structure is not displaying in Document TOC
- 12:06 AM Bug #21823 (Closed): ToC :Publish to EDMS: Alert message should be in green colour
03/12/2021
- 07:48 PM Bug #21631 (Resolved): Incorrect data showing on selecting inserted columns from groupby option For Design Requirement type
- 07:48 PM Bug #21631 (Fixed in Dev): Incorrect data showing on selecting inserted columns from groupby option For Design Requirement type
- 06:27 PM Bug #21492: VOC, Custom column Issues
- Not able to delete Requirement Branch- Fixed in 10.6.0 Cy-5
- 06:14 PM Bug #21660: Internal issue list- Consolidated list of issues discussed internally
- Cy-5 (11-3-2021)Status
*Send for review- change to "Sent for review"- Reopened in Cy 5 Build
*Requirement Branchi... - 05:50 PM Bug #21859 (Closed): Focus Element Context element selection dropdown
- 1.From the dropdown we are able to change the focus element but based on that COntext element is not changing.
If I ... - 05:36 PM Bug #21555 (Fixed in Dev): Tag search: Tags using the full space . Search results gird: 1st column need to be remvoved
- 05:12 PM Bug #21858 (Closed): Issue with stopping a requirement sent for review from group of rquirements(Refer Description)
- If a VOC with Multiple requirement or multiple VOC's are selected and sent for review. Then one of the requirement is...
- 04:56 PM Bug #21851 (Fixed in Dev): Main2: In all the Documents, One Header size displaying with big in size (New Issue facing in this Build only)
- 04:56 PM Bug #21851 (Open): Main2: In all the Documents, One Header size displaying with big in size (New Issue facing in this Build only)
- 12:11 PM Bug #21851 (Closed): Main2: In all the Documents, One Header size displaying with big in size (New Issue facing in this Build only)
- In all the Documents, One Header size displaying with big in size
- 04:28 PM Bug #21554 (Closed): VOC- Flows Done for a function requirement but the green color is not showing in the VOC
- 04:18 PM Bug #21814 (Resolved): Design VDA - Requirements and Failures are shown in a same level in Tree/Table view
- 04:17 PM Bug #21814 (Fixed in Dev): Design VDA - Requirements and Failures are shown in a same level in Tree/Table view
- 02:48 PM Bug #21798 (Resolved): Cant able to save concern Forms
- 02:01 PM Bug #21821 (Closed): Consolidation training request - After delete not getting auto refresh
- 01:37 PM Bug #21853 (Closed): Maximize button is not displayed for the popup window in the gantt page - Impact of label issue fix
- 01:27 PM Bug #21852 (Closed): When the levels are in alphabets then for 3 and 5 it is showing the color codes in the legend name also.
- 01:27 PM Bug #21647 (Closed): Suite : when double click on Forget password hyperlink the User validation window is moving
- Verified in CY-5
- 10:36 AM Bug #21647 (Resolved): Suite : when double click on Forget password hyperlink the User validation window is moving
- 01:21 PM Bug #21689 (Closed): When the level names are in the Text then the project competency report is showing error - Missed by QA.
- 12:54 PM Bug #21726 (Closed): Requirement Review- If there is a special character in the Requirement/tag name then the Review summary and View Status page is not showing the complete name
- View Status page is not showing the complete name- Moved to Issue#21660
- 12:21 PM Bug #21726 (Resolved): Requirement Review- If there is a special character in the Requirement/tag name then the Review summary and View Status page is not showing the complete name
- 12:21 PM Bug #21726 (Fixed in Dev): Requirement Review- If there is a special character in the Requirement/tag name then the Review summary and View Status page is not showing the complete name
- 12:17 PM Bug #21726 (Not Resolved): Requirement Review- If there is a special character in the Requirement/tag name then the Review summary and View Status page is not showing the complete name
- Partially Fixed-
Review summary page is showing full name with Spl Characters
In the View Status page Still facing ... - 11:51 AM Bug #21850 (Closed): In shop floor user popup showing two scrolls. Refer screenshot
- In shop floor user popup showing two scrolls. Refer screenshot
1.Competency improvement page
2.Training request sho... - 11:32 AM Bug #21849 (Closed): Update competency - The requirement which is updated is not showing in the update competency and job requirements page. Refer screenshot
- 1.Update competency - The requirement which is updated is not showing in the update competency. Refer screenshot
2.T... - 10:47 AM Bug #21848 (Closed): In New Concern page, after submitting the concern the concern s=details r not listing in the grid, shows empty grid.
- In New Concern page, after submitting the concern the concern s=details r not listing in the grid, shows empty grid.
... - 09:36 AM Bug #21633 (Closed): AD Environment : Concern initiated from Inspection Control is not listing in Problem Solver
- 09:32 AM Bug #21633 (Resolved): AD Environment : Concern initiated from Inspection Control is not listing in Problem Solver
- 09:05 AM Bug #21493 (Closed): Requirement Review-After entering comments by the reviewer the status changed to reviewed, it should change only when the reviewer clicks on accept
- 09:04 AM Bug #21799 (Closed): Conduct Gage RR-> Getting "Access Denied" when click on new button without giving closeout rights in groups.
- 01:00 AM Bug #21809 (Closed): When Site PDF Preference - Enable restricted view/Enable enhanced printing - OFF , In Pending Request and Request needing approval screen while trying to view doc Server Error occurs.
03/11/2021
- 08:13 PM Bug #21675 (Closed): Design/Process VDA - While double clicking on the Focus/Context elements header, system removes all the items from the header section.
- 10:30 AM Bug #21675 (Resolved): Design/Process VDA - While double clicking on the Focus/Context elements header, system removes all the items from the header section.
- 07:46 PM Bug #21783 (Closed): Architectural/Block Diagram - Attachment is not working as expected. (Refer Description)
- 07:43 PM Bug #21622 (Closed): VOC - In a multi branching requirement row,while deleting Requirement branch from the second row, system does not delete the requirement.
- 07:37 PM Bug #21774 (Closed): VOC/TSR Traceability - Icons for Production item and Safety goal is not displayed in Traceability popup windows
- 07:13 PM Bug #21834 (Closed): On clicking link provided in the mail it is not redirected to the respective page - showing blank screen. In the URL after login it is showing as amp;
- 07:13 PM Bug #21834 (Resolved): On clicking link provided in the mail it is not redirected to the respective page - showing blank screen. In the URL after login it is showing as amp;
- 06:44 PM Bug #21686 (Closed): HRpro - while view the document in docpro the page text size changes in the grid(usability)
- 06:40 PM Bug #21724 (Closed): Job requirement page - In research popup it shows "Enter the certification" instead of research
- 06:40 PM Bug #21725 (Closed): Update competency - The mandatory requirements not showing the icon(asterisk symbol)
- 06:23 PM Bug #21807 (Closed): Server Error : When the resource is not having the problem solver module right then it is showing server error instead of Access denied. For PM it is allowing to proceed with Concern initiation
- 06:22 PM Bug #21807 (Resolved): Server Error : When the resource is not having the problem solver module right then it is showing server error instead of Access denied. For PM it is allowing to proceed with Concern initiation
- 06:23 PM Bug #21757 (Closed): Access Denied- Not able to Initiate Concern from APQP page even after giving Module rights
- 06:22 PM Bug #21757 (Resolved): Access Denied- Not able to Initiate Concern from APQP page even after giving Module rights
- 06:00 PM Bug #21493 (Resolved): Requirement Review-After entering comments by the reviewer the status changed to reviewed, it should change only when the reviewer clicks on accept
- 06:00 PM Bug #21493 (Fixed in Dev): Requirement Review-After entering comments by the reviewer the status changed to reviewed, it should change only when the reviewer clicks on accept
- 04:48 PM Bug #21824 (Closed): Requirement Tree - After allocating Test Instance Status in DVP&R, Requirement Tree does not display any diagram.
- 04:08 PM Bug #21794 (Closed): Part details section->Alignment issue in audit needed checkbox.Refer Screen shot
- working fine in c5 hence closing this defect
- 04:07 PM Bug #21802 (Closed): VAM/VEM audit report->Audit score has not updated.It shows NaN.Refer screen shot
- working fine in c5 hence closing this defect
- 04:07 PM Bug #21812 (Closed): VEM audit Schedule->Event audit->Always first of scheduling "Schedule audit page" opens blank.It have to close and open again to schedule
- 04:07 PM Bug #21812: VEM audit Schedule->Event audit->Always first of scheduling "Schedule audit page" opens blank.It have to close and open again to schedule
- working fine in c5 hence closing this defect
- 03:59 PM Bug #21524 (In Progress): Document View Issue ->Audit Pro / LPA : Response Approaches attachment (Car,8d,7d,advanced,l0 - Evidence and additional evidence attachment) - Server error displayed when try to view the attached document from Docpro - Documents - Auditee Response Folder
- 03:39 PM Bug #21797 (Closed): "ACCESS DENIED" When trying to approve the APQP documents.
- 03:39 PM Bug #21797 (Resolved): "ACCESS DENIED" When trying to approve the APQP documents.
- 03:30 PM Bug #21525 (Closed): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- 02:23 PM Bug #21847 (Closed): The training which is created with days in training setup is showing in calendar
- The training which is created with days is showing in calendar
- 02:13 PM Bug #21490 (Closed): Document View Issue -> Audit pro/ LPA: Problem on document publish to Docpro and View the published document
- 12:59 PM Bug #21748 (Closed): New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
- 11:25 AM Bug #21821 (Resolved): Consolidation training request - After delete not getting auto refresh
- 11:02 AM Bug #21647 (Fixed in Dev): Suite : when double click on Forget password hyperlink the User validation window is moving
- 10:27 AM Bug #21726 (Resolved): Requirement Review- If there is a special character in the Requirement/tag name then the Review summary and View Status page is not showing the complete name
- 10:20 AM Bug #21554 (Resolved): VOC- Flows Done for a function requirement but the green color is not showing in the VOC
- 09:52 AM Bug #21689 (Resolved): When the level names are in the Text then the project competency report is showing error - Missed by QA.
- 09:52 AM Bug #21689 (Fixed in Dev): When the level names are in the Text then the project competency report is showing error - Missed by QA.
03/10/2021
- 08:12 PM Bug #21812: VEM audit Schedule->Event audit->Always first of scheduling "Schedule audit page" opens blank.It have to close and open again to schedule
- working fine as hot fix in c4
- 04:39 PM Bug #21812 (Resolved): VEM audit Schedule->Event audit->Always first of scheduling "Schedule audit page" opens blank.It have to close and open again to schedule
- 04:39 PM Bug #21812 (Fixed in Dev): VEM audit Schedule->Event audit->Always first of scheduling "Schedule audit page" opens blank.It have to close and open again to schedule
- 10:58 AM Bug #21812 (Open): VEM audit Schedule->Event audit->Always first of scheduling "Schedule audit page" opens blank.It have to close and open again to schedule
- 08:12 PM Feature/Enhancement #21637 (New): Review Status View in the reviewers action page is not updating properly
- 08:09 PM Feature/Enhancement #21637 (Future Release): Review Status View in the reviewers action page is not updating properly
- Can be release as a hotfix, As it is in the last cycle of the build. Could not able to fix with in 1 day.
- 08:11 PM Feature/Enhancement #21575 (New): Requirement Review- When a reviewer commented for a requirement, later on the changed the user details from suite, then the renamed user's name should show in the review summary page(QA MISSED)
- 08:07 PM Feature/Enhancement #21575 (Future Release): Requirement Review- When a reviewer commented for a requirement, later on the changed the user details from suite, then the renamed user's name should show in the review summary page(QA MISSED)
- Needs to change Table structure to fix this issue as it seems to be impact in the last build. So moving to the next b...
- 08:11 PM Feature/Enhancement #21609 (New): On Clicking the "+" icon for add production item in the PI tree the newly created PI is not showing as it child instead it added under global .(Fixed issue)
- 08:05 PM Feature/Enhancement #21609 (Future Release): On Clicking the "+" icon for add production item in the PI tree the newly created PI is not showing as it child instead it added under global .(Fixed issue)
- This needs to have a Total Control change. So might need more time to get this fix. Moving to next release.
- 08:06 PM Bug #21802: VAM/VEM audit report->Audit score has not updated.It shows NaN.Refer screen shot
- working fine as hot fix in c4
- 04:30 PM Bug #21802 (Resolved): VAM/VEM audit report->Audit score has not updated.It shows NaN.Refer screen shot
- 08:06 PM Bug #21794: Part details section->Alignment issue in audit needed checkbox.Refer Screen shot
- working fine as hot fix in c4
- 04:39 PM Bug #21794 (Resolved): Part details section->Alignment issue in audit needed checkbox.Refer Screen shot
- 04:39 PM Bug #21794 (Fixed in Dev): Part details section->Alignment issue in audit needed checkbox.Refer Screen shot
- 08:00 PM Bug #21780 (Closed): Map entity-Assign auditee person-By default supplier contact(Primary email in the supplier details) should be set as an auditee person instead it set SQI as auditee person
- working fine in c4 hence closing this issue
- 04:30 PM Bug #21780 (Resolved): Map entity-Assign auditee person-By default supplier contact(Primary email in the supplier details) should be set as an auditee person instead it set SQI as auditee person
- 07:33 PM Bug #21554 (Fixed in Dev): VOC- Flows Done for a function requirement but the green color is not showing in the VOC
- 04:30 PM Bug #21554 (Resolved): VOC- Flows Done for a function requirement but the green color is not showing in the VOC
- 03:16 PM Bug #21554 (Fixed in Dev): VOC- Flows Done for a function requirement but the green color is not showing in the VOC
- 07:23 PM Bug #21813 (Resolved): Pandora DB- The level structure is not displaying in Document TOC
- 06:20 PM Bug #21813 (Fixed with Hotfix): Pandora DB- The level structure is not displaying in Document TOC
- 06:17 PM Bug #21813 (Fixed in Dev): Pandora DB- The level structure is not displaying in Document TOC
- 10:58 AM Bug #21813 (Open): Pandora DB- The level structure is not displaying in Document TOC
- 07:22 PM Bug #21675 (Fixed in Dev): Design/Process VDA - While double clicking on the Focus/Context elements header, system removes all the items from the header section.
- 06:33 PM Bug #21757 (Fixed with Hotfix): Access Denied- Not able to Initiate Concern from APQP page even after giving Module rights
- 06:27 PM Bug #21757 (Fixed in Dev): Access Denied- Not able to Initiate Concern from APQP page even after giving Module rights
- 06:33 PM Bug #21797 (Fixed with Hotfix): "ACCESS DENIED" When trying to approve the APQP documents.
- 06:27 PM Bug #21797 (Fixed in Dev): "ACCESS DENIED" When trying to approve the APQP documents.
- 04:30 PM Bug #21797 (Resolved): "ACCESS DENIED" When trying to approve the APQP documents.
- 01:02 PM Bug #21797 (Fixed in Dev): "ACCESS DENIED" When trying to approve the APQP documents.
- 06:33 PM Bug #21807 (Fixed with Hotfix): Server Error : When the resource is not having the problem solver module right then it is showing server error instead of Access denied. For PM it is allowing to proceed with Concern initiation
- 06:26 PM Bug #21807 (Fixed in Dev): Server Error : When the resource is not having the problem solver module right then it is showing server error instead of Access denied. For PM it is allowing to proceed with Concern initiation
- 10:58 AM Bug #21807 (Open): Server Error : When the resource is not having the problem solver module right then it is showing server error instead of Access denied. For PM it is allowing to proceed with Concern initiation
- 06:24 PM Bug #21834 (Fixed in Dev): On clicking link provided in the mail it is not redirected to the respective page - showing blank screen. In the URL after login it is showing as amp;
- 10:58 AM Bug #21834 (Open): On clicking link provided in the mail it is not redirected to the respective page - showing blank screen. In the URL after login it is showing as amp;
- 06:16 PM Bug #21492: VOC, Custom column Issues
- .Not able to delete Requirement Branch- Reported issue is fixed and facing issue with deleting multiple branched requ...
- 05:25 PM Bug #21493: Requirement Review-After entering comments by the reviewer the status changed to reviewed, it should change only when the reviewer clicks on accept
- .On attaching document in the review summary with Special characters the page keeps on loading( Attached the excel fi...
- 05:04 PM Bug #21726 (Fixed in Dev): Requirement Review- If there is a special character in the Requirement/tag name then the Review summary and View Status page is not showing the complete name
- 04:30 PM Bug #21824 (Resolved): Requirement Tree - After allocating Test Instance Status in DVP&R, Requirement Tree does not display any diagram.
- 12:30 PM Bug #21824 (Fixed in Dev): Requirement Tree - After allocating Test Instance Status in DVP&R, Requirement Tree does not display any diagram.
- 10:58 AM Bug #21824 (Open): Requirement Tree - After allocating Test Instance Status in DVP&R, Requirement Tree does not display any diagram.
- 04:30 PM Bug #21823 (Resolved): ToC :Publish to EDMS: Alert message should be in green colour
- 01:02 PM Bug #21823 (Fixed in Dev): ToC :Publish to EDMS: Alert message should be in green colour
- 10:58 AM Bug #21823 (Open): ToC :Publish to EDMS: Alert message should be in green colour
- 04:30 PM Bug #21809 (Resolved): When Site PDF Preference - Enable restricted view/Enable enhanced printing - OFF , In Pending Request and Request needing approval screen while trying to view doc Server Error occurs.
- 01:02 PM Bug #21809 (Fixed in Dev): When Site PDF Preference - Enable restricted view/Enable enhanced printing - OFF , In Pending Request and Request needing approval screen while trying to view doc Server Error occurs.
- 10:58 AM Bug #21809 (Open): When Site PDF Preference - Enable restricted view/Enable enhanced printing - OFF , In Pending Request and Request needing approval screen while trying to view doc Server Error occurs.
- 04:30 PM Bug #21799 (Resolved): Conduct Gage RR-> Getting "Access Denied" when click on new button without giving closeout rights in groups.
- 04:30 PM Bug #21783 (Resolved): Architectural/Block Diagram - Attachment is not working as expected. (Refer Description)
- 04:30 PM Bug #21748 (Resolved): New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
- 04:30 PM Bug #21725 (Resolved): Update competency - The mandatory requirements not showing the icon(asterisk symbol)
- 04:30 PM Bug #21724 (Resolved): Job requirement page - In research popup it shows "Enter the certification" instead of research
- 04:30 PM Bug #21686 (Resolved): HRpro - while view the document in docpro the page text size changes in the grid(usability)
- 04:30 PM Bug #21628 (Resolved): Not allowing to remove the requirement type selected from the VOC
- 04:30 PM Bug #21774 (Resolved): VOC/TSR Traceability - Icons for Production item and Safety goal is not displayed in Traceability popup windows
- 01:33 PM Bug #21774 (Fixed in Dev): VOC/TSR Traceability - Icons for Production item and Safety goal is not displayed in Traceability popup windows
- 04:30 PM Bug #21622 (Resolved): VOC - In a multi branching requirement row,while deleting Requirement branch from the second row, system does not delete the requirement.
- 04:30 PM Bug #21525 (Resolved): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- 04:30 PM Bug #21490 (Resolved): Document View Issue -> Audit pro/ LPA: Problem on document publish to Docpro and View the published document
- 04:22 PM Bug #21844 (Closed): In Landing page dashboard, there is no Date filter, because of that reports are not displaying properly
- In Landing page dashboard, there is no Date filter, because of that reports are not displaying properly, Also Initia...
- 10:58 AM Bug #21835 (Open): FTA - Following issues occurs in FTA and FMEDA(Refer Description and Screenshots)
- 10:58 AM Bug #21832 (Open): HRPro Reports are not working
- 10:58 AM Bug #21814 (Open): Design VDA - Requirements and Failures are shown in a same level in Tree/Table view
03/09/2021
- 05:43 PM Bug #21835 (Resolved): FTA - Following issues occurs in FTA and FMEDA(Refer Description and Screenshots)
- • Safety Mechanism Name and Diagnostic coverage added for the first time is displayed only after refresh.
• Contro... - 03:54 PM Bug #21821 (Fixed in Dev): Consolidation training request - After delete not getting auto refresh
- 03:17 PM Bug #21821 (Open): Consolidation training request - After delete not getting auto refresh
- 02:55 PM Bug #21834 (Closed): On clicking link provided in the mail it is not redirected to the respective page - showing blank screen. In the URL after login it is showing as amp;
- 01:49 PM Bug #21555 (Not Resolved): Tag search: Tags using the full space . Search results gird: 1st column need to be remvoved
- 01:10 PM Bug #21832 (Closed): HRPro Reports are not working
- HRPro All the Reports are not working in this build
- 09:13 AM Reports #21696 (Closed): Budget Management report- The budget indicators are not showing in the correctly, -ve balance should show in red
03/08/2021
- 10:07 PM Bug #21812: VEM audit Schedule->Event audit->Always first of scheduling "Schedule audit page" opens blank.It have to close and open again to schedule
- Prabhu: Fixed: Changed to resolved and update engagement view
- 07:08 PM Feature/Enhancement #21611 (Not Resolved): Issues in BOSS - Meetings Email
- 1.Boss objective reminder
2.Escalation mail
3.Meeting minutes
and other mails need to check
When we run the mail ... - 04:01 PM Bug #21824 (Closed): Requirement Tree - After allocating Test Instance Status in DVP&R, Requirement Tree does not display any diagram.
- After allocating Test Instance Status in DVP&R, Requirement Tree does not display any diagram.
- 03:11 PM Bug #21823 (Closed): ToC :Publish to EDMS: Alert message should be in green colour
- ToC :Publish to EDMS: Alert message should be in green colour
Landing Page: Draft Request needing viewing: While scr... - 01:29 PM Bug #21821 (Closed): Consolidation training request - After delete not getting auto refresh
- Consolidation training request - After delete not getting auto refresh
- 01:01 PM Bug #21626 (Closed): Suite : Contact person adding area in manufacturer / Vendor registrar / Customer menus validation is not displaying when "Next Level Contact Phone" is not added and saved directly (Newly added in this Build for PS)
- Verified in Cy-4 build and Closed
- 01:00 PM Bug #21626 (Resolved): Suite : Contact person adding area in manufacturer / Vendor registrar / Customer menus validation is not displaying when "Next Level Contact Phone" is not added and saved directly (Newly added in this Build for PS)
- 11:12 AM Bug #21686 (Fixed in Dev): HRpro - while view the document in docpro the page text size changes in the grid(usability)
- Not able to replicate
03/05/2021
- 04:59 PM Bug #21783 (Fixed in Dev): Architectural/Block Diagram - Attachment is not working as expected. (Refer Description)
- 04:50 PM Bug #21814 (Closed): Design VDA - Requirements and Failures are shown in a same level in Tree/Table view
- Requirements and Failures are shown in a same level in Tree/Table view
- 03:46 PM Bug #21724 (Fixed in Dev): Job requirement page - In research popup it shows "Enter the certification" instead of research
- 03:46 PM Bug #21725 (Fixed in Dev): Update competency - The mandatory requirements not showing the icon(asterisk symbol)
- 02:32 PM Bug #21645 (Closed): In HRpro - the attached text file is not able to view. In that it shows unauthorized access
- 02:31 PM Bug #21645 (Resolved): In HRpro - the attached text file is not able to view. In that it shows unauthorized access
- 02:31 PM Bug #21645 (Fixed in Dev): In HRpro - the attached text file is not able to view. In that it shows unauthorized access
- 02:07 PM Bug #21748: New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
- Alert message is not visible if I try to add duplicate audit forms -Fixed as hotfix
- 12:48 PM Bug #21522: ToC:Single Page TOC View: No of documents is not available whereas its displayed for the same view in doc mgmt
- Wrongly change the staus to resolved as per ragavi comment
- 12:47 PM Bug #21522 (Open): ToC:Single Page TOC View: No of documents is not available whereas its displayed for the same view in doc mgmt
- 12:41 PM Bug #21573 (Closed): Initiate change request: Add doc popup: Prefix is showing in separate column , it should get updated in Document number itself
- In forms it displays only do number not the prefix
- 11:06 AM Bug #21573 (Resolved): Initiate change request: Add doc popup: Prefix is showing in separate column , it should get updated in Document number itself
- 11:06 AM Bug #21573 (Open): Initiate change request: Add doc popup: Prefix is showing in separate column , it should get updated in Document number itself
- 10:11 AM Bug #21573 (Closed): Initiate change request: Add doc popup: Prefix is showing in separate column , it should get updated in Document number itself
- 12:38 PM Bug #21813 (Closed): Pandora DB- The level structure is not displaying in Document TOC
- Pandora DB- The level structure is not displaying in Document TOC
- 12:32 PM Bug #21729 (Closed): Audit program-Assign audit type and audit form->"Please select row to delete" alert,Please set doc level selector in business alert, has alignment issue.Refer Screen shot
- working fine in c4 hence closing this issue
- 12:27 PM Bug #21729: Audit program-Assign audit type and audit form->"Please select row to delete" alert,Please set doc level selector in business alert, has alignment issue.Refer Screen shot
- working fine in c4 hence closing this issue
- 12:28 PM Bug #21723 (Closed): Business rule - route for approving certificate - The created route in hrpro is not showing in the dropdown
- 12:26 PM Bug #21723 (Resolved): Business rule - route for approving certificate - The created route in hrpro is not showing in the dropdown
- 12:26 PM Bug #21723 (Fixed in Dev): Business rule - route for approving certificate - The created route in hrpro is not showing in the dropdown
- 12:26 PM Bug #21785 (TBD): VEM audit->On setting Supplier preference as EWQIMS in administrator setting , no audit option to do corrective action close out by default
- 12:25 PM Bug #21785 (Open): VEM audit->On setting Supplier preference as EWQIMS in administrator setting , no audit option to do corrective action close out by default
- 12:13 PM Bug #21812 (Closed): VEM audit Schedule->Event audit->Always first of scheduling "Schedule audit page" opens blank.It have to close and open again to schedule
- VEM audit Schedule->Event audit->Always first of scheduling "Schedule audit page" opens blank.It have to close and op...
- 12:12 PM Bug #21490 (Fixed in Dev): Document View Issue -> Audit pro/ LPA: Problem on document publish to Docpro and View the published document
- 12:06 PM Bug #21669 (Closed): VAM/VEM audit->VDA report options in perform audit screen shows Audit pro module data
- VDA report option has removed in SM as it is not aplicable now.Hence closing this issue
- 12:05 PM Bug #21784 (Closed): VAM audit-Corrective action close out->No checklists details found to edit in View/edit checklists details page
- working fine in c4 hence closing this issue
- 12:02 PM Bug #21781 (Closed): VAM audit->Irrelevant checklists details (not imported in checklists)are listing by default in fill checklists page.Refer screen shots
- working fine in c4 hence closing this issue
- 11:58 AM Bug #21799 (Fixed in Dev): Conduct Gage RR-> Getting "Access Denied" when click on new button without giving closeout rights in groups.
- 11:54 AM Bug #21758 (Closed): Access Denied- Not able to add competencies from APQP page even after giving Module rights
- 11:51 AM Bug #21758 (Resolved): Access Denied- Not able to add competencies from APQP page even after giving Module rights
- 11:51 AM Bug #21758 (Fixed in Dev): Access Denied- Not able to add competencies from APQP page even after giving Module rights
- 11:49 AM Bug #21626 (Fixed in Dev): Suite : Contact person adding area in manufacturer / Vendor registrar / Customer menus validation is not displaying when "Next Level Contact Phone" is not added and saved directly (Newly added in this Build for PS)
- 11:44 AM Bug #21610 (Closed): Change management-> AD environment :Change request form in Approvers login when approved page keeps spinning and nothing is happening wile approving
- Issue verified in both Website and AD environments for CM flows like CR and CN both are working fine so closing this ...
- 11:41 AM Bug #21610 (Resolved): Change management-> AD environment :Change request form in Approvers login when approved page keeps spinning and nothing is happening wile approving
- Not replicating
- 10:07 AM Bug #21728 (Closed): Audit program-Assign audit type and audit form->audit form lists option shows different font style and size.Need same font size and style across the module
- working fine in c4 hence closing this issue
- 10:06 AM Bug #21730 (Closed): Audit program-Assign audit type and audit form->Deleted success alert has alignment and font style,size issue
- working fine in c4 hence closing this issue
- 10:06 AM Bug #21731 (Closed): Audit program-Assign audit type and audit form->Issue 1: On mouse hovering "DONE" button in checklists selection shows blue color,it should be green, Issue2: On mouse hovering "OK" button in deleted success alert shows Red color it should be green color
- working fine in c4 hence closing this issue
- 10:05 AM Bug #21731: Audit program-Assign audit type and audit form->Issue 1: On mouse hovering "DONE" button in checklists selection shows blue color,it should be green, Issue2: On mouse hovering "OK" button in deleted success alert shows Red color it should be green color
- working fine in c4 hence closing this issue
- 10:05 AM Bug #21782 (Closed): VAM/VEM audit-Done button in Upload NC/OFI Clause screen on mouse hovering it display blue color.It should be in green.Refer Screen shot
- working fine in c4 hence closing this issue
- 02:30 AM Bug #21809 (Closed): When Site PDF Preference - Enable restricted view/Enable enhanced printing - OFF , In Pending Request and Request needing approval screen while trying to view doc Server Error occurs.
- When Site PDF Preference - Enable restricted view/Enable enhanced printing - OFF , In Pending Request and Request ne...
03/04/2021
- 11:34 PM Bug #21802 (Fixed in Dev): VAM/VEM audit report->Audit score has not updated.It shows NaN.Refer screen shot
- 08:44 AM Bug #21802 (Open): VAM/VEM audit report->Audit score has not updated.It shows NaN.Refer screen shot
- 11:17 PM Bug #21780 (Fixed in Dev): Map entity-Assign auditee person-By default supplier contact(Primary email in the supplier details) should be set as an auditee person instead it set SQI as auditee person
- By default SQE is primary contact. Incase if we changed primary contact then Assign auditee person will get changed
- 11:14 PM Bug #21748 (Fixed in Dev): New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
- 06:47 PM Bug #21525 (Fixed in Dev): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- 05:55 PM Bug #21807 (Closed): Server Error : When the resource is not having the problem solver module right then it is showing server error instead of Access denied. For PM it is allowing to proceed with Concern initiation
- 03:22 PM Bug #21740 (Closed): Access Denied- While trying to create a new project after Giving APQP Group rights to a User getting Access denied Alert.
- 02:21 PM Bug #21642 (Closed): Change management : PDF View is not working for CR view and as well as View in Doc pro Specified Folder structure view
- Form is viewable but Report logo is not displaying
- 12:41 PM Bug #21622 (Fixed in Dev): VOC - In a multi branching requirement row,while deleting Requirement branch from the second row, system does not delete the requirement.
- 12:40 PM Bug #21628 (Fixed in Dev): Not allowing to remove the requirement type selected from the VOC
- 11:44 AM Bug #21699 (Closed): Interested party expectation page - while add the note, the alignment problem is there in the page. Refer screenshot
- 11:38 AM Bug #21699 (Resolved): Interested party expectation page - while add the note, the alignment problem is there in the page. Refer screenshot
- 11:37 AM Bug #21699 (Fixed in Dev): Interested party expectation page - while add the note, the alignment problem is there in the page. Refer screenshot
- 11:07 AM Bug #21699 (Not Resolved): Interested party expectation page - while add the note, the alignment problem is there in the page. Refer screenshot
- 11:07 AM Bug #21699: Interested party expectation page - while add the note, the alignment problem is there in the page. Refer screenshot
- Now the data added in the note field is shown for the particular row. For the other row it is not shown Refer screenshot
- 08:44 AM Bug #21799 (Open): Conduct Gage RR-> Getting "Access Denied" when click on new button without giving closeout rights in groups.
- 08:44 AM Bug #21798 (Open): Cant able to save concern Forms
- 08:44 AM Bug #21797 (Open): "ACCESS DENIED" When trying to approve the APQP documents.
- 08:44 AM Bug #21796 (Open): Expectation category - When click new it shows access denied.
- 08:44 AM Bug #21794 (Open): Part details section->Alignment issue in audit needed checkbox.Refer Screen shot
- 01:39 AM Bug #21518 (Closed): Toc: Single page TOC: PFB the desc for list of issues
- 01:35 AM Bug #21519 (Closed): ToC: Single page TOC: Not showing all the documents. Sometimes its working, sometimes its not(Not sure its because of my machine problem)
- 01:33 AM Bug #21523 (Closed): Advanced search: Single page toc is not working. Page keeps on loading without level or search criteria
- 01:24 AM Bug #21599 (Closed): Pending Document Draft - Date Search - The displays wrong content . On search the date which has no record the alert displays wrong content
- 01:22 AM Bug #21607 (Closed): Doc Management > Document Edit - On editing doc name / number and Clicking on save there is no response
03/03/2021
- 10:04 PM Bug #21505 (Closed): Common(All module) -->Doc Pro-> Unable to view attached document under MSA Module. Page keeps on Loading
- 10:04 PM Bug #21639 (Closed): Common-->TPM and MSA--> When tries to view the attached (Excel, pdf and word) doc, getting error->Please refer screenshot
- 06:48 PM Bug #21802 (Closed): VAM/VEM audit report->Audit score has not updated.It shows NaN.Refer screen shot
- VAM/VEM audit report->Audit score has not updated.It shows NaN.Refer screen shot
- 06:37 PM Bug #21780 (Not Resolved): Map entity-Assign auditee person-By default supplier contact(Primary email in the supplier details) should be set as an auditee person instead it set SQI as auditee person
- instead of setting primary email as supplier contact(auditee) it assign sqi as default auditee.pls chk
- 08:45 AM Bug #21780 (Resolved): Map entity-Assign auditee person-By default supplier contact(Primary email in the supplier details) should be set as an auditee person instead it set SQI as auditee person
- 06:08 PM Bug #21605 (Closed): In both HRpro and boss - The added expectation category is not getting saved. Check description
- 08:45 AM Bug #21605 (Resolved): In both HRpro and boss - The added expectation category is not getting saved. Check description
- 05:47 PM Bug #21748 (In Progress): New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
- 02:35 PM Bug #21748 (Not Resolved): New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
- 2. Alert message is not visible if I try to add duplicate audit forms -Not Fixed
4. There is note for copy audit f... - 08:45 AM Bug #21748 (Resolved): New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
- 05:47 PM Bug #21525 (In Progress): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- 04:24 PM Bug #21525 (Not Resolved): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- 08:45 AM Bug #21525 (Resolved): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- 05:47 PM Bug #21490 (In Progress): Document View Issue -> Audit pro/ LPA: Problem on document publish to Docpro and View the published document
- 03:47 PM Bug #21490 (Not Resolved): Document View Issue -> Audit pro/ LPA: Problem on document publish to Docpro and View the published document
- 2. Perform audit related attachments not published in assigned level. Duplicate parent level is creating if publish w...
- 05:07 PM Bug #21799 (Closed): Conduct Gage RR-> Getting "Access Denied" when click on new button without giving closeout rights in groups.
- 04:33 PM Bug #21761 (Closed): VDA Changes -> Multisite -> VDA Report is not opening even after publishing report for New Or Existing Site (Refer Pandora DB)
- 08:45 AM Bug #21761 (Resolved): VDA Changes -> Multisite -> VDA Report is not opening even after publishing report for New Or Existing Site (Refer Pandora DB)
- 04:25 PM Bug #21741 (Closed): Common: When am trying to give the rights and verify our software. It shows access denied message. Once we log out and log in, it's working as expected.
- 08:45 AM Bug #21741 (Resolved): Common: When am trying to give the rights and verify our software. It shows access denied message. Once we log out and log in, it's working as expected.
- 04:24 PM Bug #21798 (Closed): Cant able to save concern Forms
- Cant able to save concern Forms, clicking on save not shows any alert.
- 04:20 PM Bug #21797 (Closed): "ACCESS DENIED" When trying to approve the APQP documents.
- 04:19 PM Bug #21627 (Closed): Problem on showing alert / validation messages
- 08:45 AM Bug #21627 (Resolved): Problem on showing alert / validation messages
- 04:08 PM Bug #21796 (Closed): Expectation category - When click new it shows access denied.
- Expectation category - When click new it shows access denied.
For both normal rights user and module admin rights us... - 03:37 PM Bug #21794 (Closed): Part details section->Alignment issue in audit needed checkbox.Refer Screen shot
- Part details section->Alignment issue in audit needed checkbox.Refer Screen shot
- 02:41 PM Bug #21756 (Closed): New UI -> Assign Audit Types and Forms -> Delete Audit Form(s) is not working if i try to delete with multiple selections without any dependency.
- 08:45 AM Bug #21756 (Resolved): New UI -> Assign Audit Types and Forms -> Delete Audit Form(s) is not working if i try to delete with multiple selections without any dependency.
- 02:38 PM Bug #21755 (Closed): New UI -> Assign Audit Types and Forms -> Audit Type: Template and Reference -> Attach from local -> Server error displayed when clicking document name hyperlink on attach from local popup window before clicking on done button
- 02:37 PM Bug #21751 (Closed): New UI -> Assign Audit Types and Forms -> The system is allowing to copy audit forms for same audit criteria and same audit type (In existing design, system wont show the audit type for same audit criteria)
- 08:45 AM Bug #21751 (Resolved): New UI -> Assign Audit Types and Forms -> The system is allowing to copy audit forms for same audit criteria and same audit type (In existing design, system wont show the audit type for same audit criteria)
- 02:36 PM Bug #21749 (Closed): New UI -> Assign Audit Types and Forms -> Non-ITAR user can able to change Yes or No option for audit form on ITAR column
- 08:45 AM Bug #21749 (Resolved): New UI -> Assign Audit Types and Forms -> Non-ITAR user can able to change Yes or No option for audit form on ITAR column
- 02:29 PM Bug #21747 (Closed): New UI -> Assign Audit Types and Forms -> Type: Online Form -> Checklist selection-> Done button is not responding while adding or modifying checkpoints by adding after clicking on "Collapse" icon for any one checklist
- 08:45 AM Bug #21747 (Resolved): New UI -> Assign Audit Types and Forms -> Type: Online Form -> Checklist selection-> Done button is not responding while adding or modifying checkpoints by adding after clicking on "Collapse" icon for any one checklist
- 02:28 PM Bug #21745 (Closed): New UI -> Assign Audit Types and Forms -> Unable to add Audit forms if Audit type name is "APP_8000001 & %!@~$%^&TXN7617603TMPLT228 (1)'''''
- 08:45 AM Bug #21745 (Resolved): New UI -> Assign Audit Types and Forms -> Unable to add Audit forms if Audit type name is "APP_8000001 & %!@~$%^&TXN7617603TMPLT228 (1)'''''
- 09:49 AM Bug #21555 (Resolved): Tag search: Tags using the full space . Search results gird: 1st column need to be remvoved
- 09:49 AM Bug #21523 (Resolved): Advanced search: Single page toc is not working. Page keeps on loading without level or search criteria
- 09:49 AM Bug #21522 (Resolved): ToC:Single Page TOC View: No of documents is not available whereas its displayed for the same view in doc mgmt
- 09:49 AM Bug #21519 (Resolved): ToC: Single page TOC: Not showing all the documents. Sometimes its working, sometimes its not(Not sure its because of my machine problem)
- 09:49 AM Bug #21518 (Resolved): Toc: Single page TOC: PFB the desc for list of issues
- 09:15 AM Bug #21632 (Closed): All Concern status : Page keeps on loading on performing search operation
- 08:45 AM Bug #21785 (Resolved): VEM audit->On setting Supplier preference as EWQIMS in administrator setting , no audit option to do corrective action close out by default
- 08:45 AM Bug #21784 (Resolved): VAM audit-Corrective action close out->No checklists details found to edit in View/edit checklists details page
- 08:45 AM Bug #21782 (Resolved): VAM/VEM audit-Done button in Upload NC/OFI Clause screen on mouse hovering it display blue color.It should be in green.Refer Screen shot
- 08:45 AM Bug #21781 (Resolved): VAM audit->Irrelevant checklists details (not imported in checklists)are listing by default in fill checklists page.Refer screen shots
- 08:45 AM Bug #21740 (Resolved): Access Denied- While trying to create a new project after Giving APQP Group rights to a User getting Access denied Alert.
- 08:45 AM Bug #21731 (Resolved): Audit program-Assign audit type and audit form->Issue 1: On mouse hovering "DONE" button in checklists selection shows blue color,it should be green, Issue2: On mouse hovering "OK" button in deleted success alert shows Red color it should be green color
- 08:45 AM Bug #21730 (Resolved): Audit program-Assign audit type and audit form->Deleted success alert has alignment and font style,size issue
- 08:45 AM Bug #21729 (Resolved): Audit program-Assign audit type and audit form->"Please select row to delete" alert,Please set doc level selector in business alert, has alignment issue.Refer Screen shot
- 08:45 AM Bug #21728 (Resolved): Audit program-Assign audit type and audit form->audit form lists option shows different font style and size.Need same font size and style across the module
- 08:45 AM Bug #21699 (Resolved): Interested party expectation page - while add the note, the alignment problem is there in the page. Refer screenshot
- 08:45 AM Bug #21642 (Resolved): Change management : PDF View is not working for CR view and as well as View in Doc pro Specified Folder structure view
- 08:45 AM Feature/Enhancement #21611 (Resolved): Issues in BOSS - Meetings Email
03/02/2021
- 11:35 PM Feature/Enhancement #21611 (Fixed in Dev): Issues in BOSS - Meetings Email
- 1. The action reminder mail is not showing in the mail server - working fine(please refer the attachment )
2. submit... - 07:54 PM Feature/Enhancement #21611 (Not Resolved): Issues in BOSS - Meetings Email
- 1. The action reminder mail is not showing in the mail server
2. submit Meeting minutes - not displaying the meeting... - 11:32 PM Bug #21740 (Fixed in Dev): Access Denied- While trying to create a new project after Giving APQP Group rights to a User getting Access denied Alert.
- 09:01 AM Bug #21740 (Open): Access Denied- While trying to create a new project after Giving APQP Group rights to a User getting Access denied Alert.
- 11:32 PM Bug #21741 (Fixed in Dev): Common: When am trying to give the rights and verify our software. It shows access denied message. Once we log out and log in, it's working as expected.
- 09:01 AM Bug #21741 (Open): Common: When am trying to give the rights and verify our software. It shows access denied message. Once we log out and log in, it's working as expected.
- 11:26 PM Bug #21785 (Fixed in Dev): VEM audit->On setting Supplier preference as EWQIMS in administrator setting , no audit option to do corrective action close out by default
- WAD..will have a discussion with bijoy for further clarification
- 07:06 PM Bug #21785 (Open): VEM audit->On setting Supplier preference as EWQIMS in administrator setting , no audit option to do corrective action close out by default
- 02:56 PM Bug #21785 (TBD): VEM audit->On setting Supplier preference as EWQIMS in administrator setting , no audit option to do corrective action close out by default
- VEM audit->On setting Supplier preference as EWQIMS in administrator setting , no audit option to do corrective actio...
- 11:10 PM Bug #21748 (Fixed in Dev): New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
1. All success message / Alert / Warning messages -> Warning/ alert / Success Icon is not showing before text mes...- 09:01 AM Bug #21748 (Open): New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
- 10:43 PM Bug #21784 (Fixed in Dev): VAM audit-Corrective action close out->No checklists details found to edit in View/edit checklists details page
- 07:06 PM Bug #21784 (Open): VAM audit-Corrective action close out->No checklists details found to edit in View/edit checklists details page
- 02:42 PM Bug #21784 (Closed): VAM audit-Corrective action close out->No checklists details found to edit in View/edit checklists details page
- VAM audit-Corrective action close out->No checklists details found to edit in View/edit checklists details page
- 10:43 PM Bug #21781 (Fixed in Dev): VAM audit->Irrelevant checklists details (not imported in checklists)are listing by default in fill checklists page.Refer screen shots
- 07:06 PM Bug #21781 (Open): VAM audit->Irrelevant checklists details (not imported in checklists)are listing by default in fill checklists page.Refer screen shots
- 02:18 PM Bug #21781 (Closed): VAM audit->Irrelevant checklists details (not imported in checklists)are listing by default in fill checklists page.Refer screen shots
- VAM audit->Irrelevant checklists details (not imported in checklists)are listing by default in fill checklists page.R...
- 09:51 PM Bug #21605 (Fixed in Dev): In both HRpro and boss - The added expectation category is not getting saved. Check description
- 09:30 PM Bug #21699 (Fixed in Dev): Interested party expectation page - while add the note, the alignment problem is there in the page. Refer screenshot
- 07:39 PM Bug #21780 (Fixed in Dev): Map entity-Assign auditee person-By default supplier contact(Primary email in the supplier details) should be set as an auditee person instead it set SQI as auditee person
- By default Primary contact Email Address will assign
- 07:06 PM Bug #21780 (Open): Map entity-Assign auditee person-By default supplier contact(Primary email in the supplier details) should be set as an auditee person instead it set SQI as auditee person
- 02:00 PM Bug #21780 (Closed): Map entity-Assign auditee person-By default supplier contact(Primary email in the supplier details) should be set as an auditee person instead it set SQI as auditee person
- Map entity-Assign auditee person-By default supplier contact(Primary email in the supplier details) should be set as ...
- 07:33 PM Bug #21782 (Fixed in Dev): VAM/VEM audit-Done button in Upload NC/OFI Clause screen on mouse hovering it display blue color.It should be in green.Refer Screen shot
- 07:06 PM Bug #21782 (Open): VAM/VEM audit-Done button in Upload NC/OFI Clause screen on mouse hovering it display blue color.It should be in green.Refer Screen shot
- 02:33 PM Bug #21782 (Closed): VAM/VEM audit-Done button in Upload NC/OFI Clause screen on mouse hovering it display blue color.It should be in green.Refer Screen shot
- VAM/VEM audit-Done button in Upload NC/OFI Clause screen on mouse hovering it display blue color.It should be in gree...
- 07:32 PM Bug #21761 (Fixed in Dev): VDA Changes -> Multisite -> VDA Report is not opening even after publishing report for New Or Existing Site (Refer Pandora DB)
- 09:01 AM Bug #21761 (Open): VDA Changes -> Multisite -> VDA Report is not opening even after publishing report for New Or Existing Site (Refer Pandora DB)
- 07:13 PM Bug #21755 (Resolved): New UI -> Assign Audit Types and Forms -> Audit Type: Template and Reference -> Attach from local -> Server error displayed when clicking document name hyperlink on attach from local popup window before clicking on done button
- 09:01 AM Bug #21755 (Open): New UI -> Assign Audit Types and Forms -> Audit Type: Template and Reference -> Attach from local -> Server error displayed when clicking document name hyperlink on attach from local popup window before clicking on done button
- 07:13 PM Bug #21642 (Fixed in Dev): Change management : PDF View is not working for CR view and as well as View in Doc pro Specified Folder structure view
- 07:06 PM Bug #21783 (Open): Architectural/Block Diagram - Attachment is not working as expected. (Refer Description)
- 02:38 PM Bug #21783 (Closed): Architectural/Block Diagram - Attachment is not working as expected. (Refer Description)
- • Attached document is not displayed in the Attachment section for the first time. But displays the Delete option.
... - 07:06 PM Bug #21779 (Open): Publish: Set Keyword(s) is not working for the Existing Published Documents (QA Missed)
- 01:10 PM Bug #21779 (Closed): Publish: Set Keyword(s) is not working for the Existing Published Documents (QA Missed)
- Set Keyword(s) is not working for the Existing Published Documents
- 06:43 PM Bug #21747 (Fixed in Dev): New UI -> Assign Audit Types and Forms -> Type: Online Form -> Checklist selection-> Done button is not responding while adding or modifying checkpoints by adding after clicking on "Collapse" icon for any one checklist
- 09:01 AM Bug #21747 (Open): New UI -> Assign Audit Types and Forms -> Type: Online Form -> Checklist selection-> Done button is not responding while adding or modifying checkpoints by adding after clicking on "Collapse" icon for any one checklist
- 05:26 PM Bug #21731 (Fixed in Dev): Audit program-Assign audit type and audit form->Issue 1: On mouse hovering "DONE" button in checklists selection shows blue color,it should be green, Issue2: On mouse hovering "OK" button in deleted success alert shows Red color it should be green color
- 09:01 AM Bug #21731 (Open): Audit program-Assign audit type and audit form->Issue 1: On mouse hovering "DONE" button in checklists selection shows blue color,it should be green, Issue2: On mouse hovering "OK" button in deleted success alert shows Red color it should be green color
- 05:23 PM Bug #21729 (Fixed in Dev): Audit program-Assign audit type and audit form->"Please select row to delete" alert,Please set doc level selector in business alert, has alignment issue.Refer Screen shot
- 09:01 AM Bug #21729 (Open): Audit program-Assign audit type and audit form->"Please select row to delete" alert,Please set doc level selector in business alert, has alignment issue.Refer Screen shot
- 05:23 PM Bug #21728 (Fixed in Dev): Audit program-Assign audit type and audit form->audit form lists option shows different font style and size.Need same font size and style across the module
- 09:01 AM Bug #21728 (Open): Audit program-Assign audit type and audit form->audit form lists option shows different font style and size.Need same font size and style across the module
- 05:18 PM Bug #21730 (Fixed in Dev): Audit program-Assign audit type and audit form->Deleted success alert has alignment and font style,size issue
- 09:01 AM Bug #21730 (Open): Audit program-Assign audit type and audit form->Deleted success alert has alignment and font style,size issue
- 05:17 PM Bug #21745 (Fixed in Dev): New UI -> Assign Audit Types and Forms -> Unable to add Audit forms if Audit type name is "APP_8000001 & %!@~$%^&TXN7617603TMPLT228 (1)'''''
- 09:01 AM Bug #21745 (Open): New UI -> Assign Audit Types and Forms -> Unable to add Audit forms if Audit type name is "APP_8000001 & %!@~$%^&TXN7617603TMPLT228 (1)'''''
- 05:06 PM Bug #21749 (Fixed in Dev): New UI -> Assign Audit Types and Forms -> Non-ITAR user can able to change Yes or No option for audit form on ITAR column
- 09:01 AM Bug #21749 (Open): New UI -> Assign Audit Types and Forms -> Non-ITAR user can able to change Yes or No option for audit form on ITAR column
- 02:52 PM Bug #21751 (Fixed in Dev): New UI -> Assign Audit Types and Forms -> The system is allowing to copy audit forms for same audit criteria and same audit type (In existing design, system wont show the audit type for same audit criteria)
- 09:01 AM Bug #21751 (Open): New UI -> Assign Audit Types and Forms -> The system is allowing to copy audit forms for same audit criteria and same audit type (In existing design, system wont show the audit type for same audit criteria)
- 01:27 PM Bug #21490 (Resolved): Document View Issue -> Audit pro/ LPA: Problem on document publish to Docpro and View the published document
- 01:26 PM Bug #21490 (Fixed in Dev): Document View Issue -> Audit pro/ LPA: Problem on document publish to Docpro and View the published document
- 01:14 PM Bug #21756 (Fixed in Dev): New UI -> Assign Audit Types and Forms -> Delete Audit Form(s) is not working if i try to delete with multiple selections without any dependency.
- 09:01 AM Bug #21756 (Open): New UI -> Assign Audit Types and Forms -> Delete Audit Form(s) is not working if i try to delete with multiple selections without any dependency.
- 12:52 PM Bug #21525 (Fixed in Dev): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- 11:58 AM Bug #21774 (Open): VOC/TSR Traceability - Icons for Production item and Safety goal is not displayed in Traceability popup windows
- 10:54 AM Bug #21774 (Closed): VOC/TSR Traceability - Icons for Production item and Safety goal is not displayed in Traceability popup windows
- Icons for Production item and Safety goal is not displayed in Traceability popup windows
- 11:49 AM Bug #21675 (Not Resolved): Design/Process VDA - While double clicking on the Focus/Context elements header, system removes all the items from the header section.
- 11:32 AM Bug #21664 (Closed): Meetings page issue list: Refer description
- 10:56 AM Bug #21494 (Closed): VOC Traceability - Selected Function/Requirement is not displayed on the header of VOC Traceability. (Refer Description)
- 10:43 AM Bug #21638 (Closed): Excel/Word/Pdf -- When trying to view these documents in APQP templates as Reference type [document under Default module level] then it is showing as Invalid corrupted file. Same is working for Project
- 09:01 AM Bug #21758 (Open): Access Denied- Not able to add competencies from APQP page even after giving Module rights
- 09:01 AM Bug #21757 (Open): Access Denied- Not able to Initiate Concern from APQP page even after giving Module rights
- 09:01 AM Bug #21726 (Open): Requirement Review- If there is a special character in the Requirement/tag name then the Review summary and View Status page is not showing the complete name
- 09:01 AM Bug #21725 (Open): Update competency - The mandatory requirements not showing the icon(asterisk symbol)
- 09:01 AM Bug #21724 (Open): Job requirement page - In research popup it shows "Enter the certification" instead of research
- 09:01 AM Bug #21723 (Open): Business rule - route for approving certificate - The created route in hrpro is not showing in the dropdown
03/01/2021
- 11:04 PM Bug #21525 (In Progress): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- 11:03 PM Bug #21627 (Fixed in Dev): Problem on showing alert / validation messages
- 10:10 AM Bug #21627: Problem on showing alert / validation messages
- Not able to assign parameterized score for Checklist/Checkpoints and also before selecting parameterized score radio ...
- 10:01 AM Bug #21627 (Not Resolved): Problem on showing alert / validation messages
- 2) Validation displays error when parameterized score is not specified and saved directly - Not Fixed
- 08:06 PM Bug #21657 (Closed): FTA - While doing Add probability for Design cause of the parent element, system displays Application Error. (Refer Description)
- 07:34 PM Bug #21544 (Closed): VOC - Unable to add requirement from consecutive(Second) row after inserting multiple rows.
- 07:29 PM Bug #21622 (Not Resolved): VOC - In a multi branching requirement row,while deleting Requirement branch from the second row, system does not delete the requirement.
- 07:27 PM Bug #21619 (Closed): VOC - Deleting VOC row without refreshing is not working as expected. (Refer Description)
- 05:37 PM Bug #21492: VOC, Custom column Issues
- 10.6.0 Cy-3 Status
4.Not able to add Function/requirement from the VOC number- Issue Fixed
6.After deleting Funct... - 04:51 PM Bug #21761 (Closed): VDA Changes -> Multisite -> VDA Report is not opening even after publishing report for New Or Existing Site (Refer Pandora DB)
- VDA Changes -> Multisite -> VDA Report is not opening even after publishing report for New Or Existing Site (Refer Pa...
- 04:42 PM Bug #21659 (Closed): While creating new PI, if I entered multiple rows and remove a row in between it will keep 2 rows as mandatory
- 03:27 PM Bug #21758 (Closed): Access Denied- Not able to add competencies from APQP page even after giving Module rights
- Access Denied- Not able to add competencies from APQP page even after giving Module rights
- 03:26 PM Bug #21625 (Closed): VOC - Deleting a VOC row by right clicking on Number and Description need not display the Prompt message. (Refer Description)
- 03:20 PM Bug #21757 (Closed): Access Denied- Not able to Initiate Concern from APQP page even after giving Module rights
- Access Denied- Not able to Initiate Concern from APQP page even after giving Module rights
- 02:59 PM Bug #21756 (Closed): New UI -> Assign Audit Types and Forms -> Delete Audit Form(s) is not working if i try to delete with multiple selections without any dependency.
- New UI -> Assign Audit Types and Forms -> Delete Audit Form(s) is not working if i try to delete with multiple select...
- 02:55 PM Bug #21634 (Closed): VOC - Group By option is not working properly. (Refer Description)
- Closed in SP10.6.0 Cycle 3.
- 02:53 PM Bug #21663 (Not Resolved): Production item Table - Unable to scroll down till the last PI. Also Horizontal scrollbar is not visible in PI table. (Refer Description)
- In VDA it is not fixed. Also in Mozilla browser PI table is displayed partially only.
- 02:46 PM Bug #21755 (Closed): New UI -> Assign Audit Types and Forms -> Audit Type: Template and Reference -> Attach from local -> Server error displayed when clicking document name hyperlink on attach from local popup window before clicking on done button
- New UI -> Assign Audit Types and Forms -> Audit Type: Template and Reference -> Attach from local -> Server error dis...
- 02:21 PM Bug #21751 (Closed): New UI -> Assign Audit Types and Forms -> The system is allowing to copy audit forms for same audit criteria and same audit type (In existing design, system wont show the audit type for same audit criteria)
- New UI -> Assign Audit Types and Forms -> The system is allowing to copy audit forms for same audit criteria and same...
- 02:09 PM Bug #21749 (Closed): New UI -> Assign Audit Types and Forms -> Non-ITAR user can able to change Yes or No option for audit form on ITAR column
- New UI -> Assign Audit Types and Forms -> Non-ITAR user can able to change Yes or No option for audit form on ITAR co...
- 02:03 PM Bug #21748 (Closed): New UI -> Assign Audit Types and Forms -> UI / Alert message design issues
- 1. All success message / Alert / Warning messages -> Warning/ alert / Success Icon is not showing before text messag...
- 01:54 PM Bug #21747 (Closed): New UI -> Assign Audit Types and Forms -> Type: Online Form -> Checklist selection-> Done button is not responding while adding or modifying checkpoints by adding after clicking on "Collapse" icon for any one checklist
- New UI -> Assign Audit Types and Forms -> Type: Online Form -> Checklist selection-> Done button is not responding wh...
- 01:43 PM Bug #21745 (Closed): New UI -> Assign Audit Types and Forms -> Unable to add Audit forms if Audit type name is "APP_8000001 & %!@~$%^&TXN7617603TMPLT228 (1)'''''
- New UI -> Assign Audit Types and Forms -> Unable to add Audit forms if Audit type name is "APP_8000001 & %!@~$%^&TXN7...
- 11:41 AM Bug #21741 (Closed): Common: When am trying to give the rights and verify our software. It shows access denied message. Once we log out and log in, it's working as expected.
- Common: When am trying to give the rights and verify our software. It shows access denied message. Once we log out an...
- 11:40 AM Bug #21605 (Not Resolved): In both HRpro and boss - The added expectation category is not getting saved. Check description
- Not fixed
3. 3.Defaulty it shows as zero in the note field
When we add data in expectation matrix it is showing in ... - 11:27 AM Bug #21698 (Closed): TBT form - When click on TBT form and open it shows application error.
- 10:27 AM Bug #21740 (Closed): Access Denied- While trying to create a new project after Giving APQP Group rights to a User getting Access denied Alert.
- While trying to create a new project after Giving APQP Group rights to a User getting Access denied Alert.
Relogin n... - 10:20 AM Bug #21524 (Not Resolved): Document View Issue ->Audit Pro / LPA : Response Approaches attachment (Car,8d,7d,advanced,l0 - Evidence and additional evidence attachment) - Server error displayed when try to view the attached document from Docpro - Documents - Auditee Response Folder
- 09:38 AM Bug #21631 (Not Resolved): Incorrect data showing on selecting inserted columns from groupby option For Design Requirement type
- Still Facing Data mismatch
- 09:37 AM Bug #21678 (Closed): Auditee response ->Supplier self evaluation page is not loading
- 09:27 AM Bug #21620 (Closed): Icon Missing- The PI tree and flowdown pop up is not showing icons
- 09:23 AM Bug #21646 (Closed): Not able to view FST Published documents , showing Access denied
02/26/2021
- 12:20 PM Bug #21731 (Closed): Audit program-Assign audit type and audit form->Issue 1: On mouse hovering "DONE" button in checklists selection shows blue color,it should be green, Issue2: On mouse hovering "OK" button in deleted success alert shows Red color it should be green color
- Audit program-Assign audit type and audit form->Issue 1: On mouse hovering "DONE" button in checklists selection show...
- 12:18 PM Bug #21730 (Closed): Audit program-Assign audit type and audit form->Deleted success alert has alignment and font style,size issue
- Audit program-Assign audit type and audit form->Deleted success alert has alignment and font style,size issue
- 12:18 PM Bug #21525 (Not Resolved): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- folder not created
- 10:55 AM Bug #21525 (Resolved): Document View Issue -> Audit pro/ LPA: Closed Out Folder is not getting displayed / created by the system automatically
- 12:17 PM Bug #21729 (Closed): Audit program-Assign audit type and audit form->"Please select row to delete" alert,Please set doc level selector in business alert, has alignment issue.Refer Screen shot
- Audit program-Assign audit type and audit form->"Please select row to delete" alert,Please set doc level selector in ...
- 12:14 PM Bug #21728 (Closed): Audit program-Assign audit type and audit form->audit form lists option shows different font style and size.Need same font size and style across the module
- Audit program-Assign audit type and audit form->audit form lists option shows different font style and size.Need same...
- 12:13 PM Bug #21612 (Closed): Competitors - While add the competitor field is only mandatory, other field are not mandatory
- 12:07 PM Bug #21699 (Not Resolved): Interested party expectation page - while add the note, the alignment problem is there in the page. Refer screenshot
- Now the other columns are not getting displayed. Refer screenshot
- 10:55 AM Bug #21699 (Resolved): Interested party expectation page - while add the note, the alignment problem is there in the page. Refer screenshot
- 12:07 PM Bug #21635 (Closed): Audit pro/LPA : CA Closeout page of Perform Audit Some times Checkbox Option to select Findings is not displaying
- verified in CY-3
- 10:55 AM Bug #21635 (Resolved): Audit pro/LPA : CA Closeout page of Perform Audit Some times Checkbox Option to select Findings is not displaying
- 12:06 PM Bug #21626 (Not Resolved): Suite : Contact person adding area in manufacturer / Vendor registrar / Customer menus validation is not displaying when "Next Level Contact Phone" is not added and saved directly (Newly added in this Build for PS)
- Validation is not displayed when Next level contact phone is not specified and Also when after adding the Next level ...
- 10:55 AM Bug #21626 (Resolved): Suite : Contact person adding area in manufacturer / Vendor registrar / Customer menus validation is not displaying when "Next Level Contact Phone" is not added and saved directly (Newly added in this Build for PS)
- 12:04 PM Bug #21623 (Closed): Data alignment issue while adding a new VOC row by adding function requirement branch, without refreshing VOC page
- 10:36 AM Bug #21623 (Resolved): Data alignment issue while adding a new VOC row by adding function requirement branch, without refreshing VOC page
- 12:00 PM Bug #21647 (Not Resolved): Suite : when double click on Forget password hyperlink the User validation window is moving
- Verified Cy-3
- 10:55 AM Bug #21647 (Resolved): Suite : when double click on Forget password hyperlink the User validation window is moving
- 11:59 AM Bug #21604 (Closed): Suite-> Duplicate meetings to displayed with respect to the entity But currently system is displaying Duplicate meetings only from corporate
- Verified Cy-3
- 10:55 AM Bug #21604 (Resolved): Suite-> Duplicate meetings to displayed with respect to the entity But currently system is displaying Duplicate meetings only from corporate
- 11:58 AM Bug #21642 (Not Resolved): Change management : PDF View is not working for CR view and as well as View in Doc pro Specified Folder structure view
- Verified in Cy-3 Build
- 10:55 AM Bug #21642 (Resolved): Change management : PDF View is not working for CR view and as well as View in Doc pro Specified Folder structure view
- 11:30 AM Bug #21608 (Closed): Select a layout and go for group by filter Then choose "select" from dropdown blank voc showing on refresh only datas are displaying(fixed issue-reopned)
- 10:36 AM Bug #21608 (Resolved): Select a layout and go for group by filter Then choose "select" from dropdown blank voc showing on refresh only datas are displaying(fixed issue-reopned)
- 11:25 AM Bug #21726 (Closed): Requirement Review- If there is a special character in the Requirement/tag name then the Review summary and View Status page is not showing the complete name
- Requirement Review- If there is a special character in the Requirement/tag name then the Review summary and View Stat...
- 11:11 AM Bug #21725 (Closed): Update competency - The mandatory requirements not showing the icon(asterisk symbol)
- Update competency - The mandatory requirements not showing the icon
- 11:09 AM Bug #21661 (Closed): The project team member selection popup showing 0 for the positions and other details
- 10:34 AM Bug #21661 (Resolved): The project team member selection popup showing 0 for the positions and other details
- 11:06 AM Bug #21658 (Closed): APQP FST INtegration-Based on Layout selection Group by field is not showing in APQP integrated page
- 10:36 AM Bug #21658 (Resolved): APQP FST INtegration-Based on Layout selection Group by field is not showing in APQP integrated page
- 10:55 AM Bug #21678 (Resolved): Auditee response ->Supplier self evaluation page is not loading
- 10:55 AM Bug #21669 (Resolved): VAM/VEM audit->VDA report options in perform audit screen shows Audit pro module data
- 10:55 AM Bug #21664 (Resolved): Meetings page issue list: Refer description
- 10:55 AM Bug #21646 (Resolved): Not able to view FST Published documents , showing Access denied
- 10:55 AM Bug #21639 (Resolved): Common-->TPM and MSA--> When tries to view the attached (Excel, pdf and word) doc, getting error->Please refer screenshot
- 10:55 AM Bug #21627 (Resolved): Problem on showing alert / validation messages
- 10:55 AM Bug #21625 (Resolved): VOC - Deleting a VOC row by right clicking on Number and Description need not display the Prompt message. (Refer Description)
- 10:55 AM Feature/Enhancement #21611 (Resolved): Issues in BOSS - Meetings Email
- 10:55 AM Bug #21607 (Resolved): Doc Management > Document Edit - On editing doc name / number and Clicking on save there is no response
- 10:55 AM Bug #21599 (Resolved): Pending Document Draft - Date Search - The displays wrong content . On search the date which has no record the alert displays wrong content
- 10:55 AM Bug #21494 (Resolved): VOC Traceability - Selected Function/Requirement is not displayed on the header of VOC Traceability. (Refer Description)
- 10:37 AM Bug #21544 (Resolved): VOC - Unable to add requirement from consecutive(Second) row after inserting multiple rows.
- 10:36 AM Bug #21620 (Resolved): Icon Missing- The PI tree and flowdown pop up is not showing icons
- 10:35 AM Bug #21675 (Resolved): Design/Process VDA - While double clicking on the Focus/Context elements header, system removes all the items from the header section.
- 10:35 AM Bug #21657 (Resolved): FTA - While doing Add probability for Design cause of the parent element, system displays Application Error. (Refer Description)
- 10:34 AM Bug #21631 (Resolved): Incorrect data showing on selecting inserted columns from groupby option For Design Requirement type
- 10:34 AM Bug #21634 (Resolved): VOC - Group By option is not working properly. (Refer Description)
- 10:33 AM Bug #21622 (Resolved): VOC - In a multi branching requirement row,while deleting Requirement branch from the second row, system does not delete the requirement.
- 10:33 AM Bug #21659 (Resolved): While creating new PI, if I entered multiple rows and remove a row in between it will keep 2 rows as mandatory
- 10:32 AM Bug #21663 (Resolved): Production item Table - Unable to scroll down till the last PI. Also Horizontal scrollbar is not visible in PI table. (Refer Description)
- 09:40 AM Bug #21524 (Resolved): Document View Issue ->Audit Pro / LPA : Response Approaches attachment (Car,8d,7d,advanced,l0 - Evidence and additional evidence attachment) - Server error displayed when try to view the attached document from Docpro - Documents - Auditee Response Folder
Also available in: Atom