Activity
From 12/21/2020 to 01/19/2021
01/19/2021
- 09:38 PM Bug #17055 (Fixed in Dev): LPA Reports : Findings Classification summary report is displaying only list of NC only but not OFI's
- 09:35 PM Bug #17045 (Fixed in Dev): LPA Reports : Findings Classification Summary report display header name fully as "Responsible person wise"
- 09:31 PM Bug #17044 (Fixed in Dev): LPA Reports : Findings Classification Summary report is displaying Process blank when there is no process mapped.
- 08:42 PM Bug #16943 (Fixed in Dev): LPA Reports : LPA Findings classification summary And Closure summary reports are displaying error.
- 04:26 PM Bug #21445 (Resolved): List view-> Application error is displayed while schedule the audit
- List view-> Application error is displayed while schedule the audit
01/18/2021
- 09:21 PM Bug #21443 (Closed): All LPA New Reports - Manually identified NC and OFI count and Correction and closed out by auditor count (Manually Identified) is not displayed in report
- All LPA New Reports - Manually identified NC and OFI count and Correction and closed out by auditor count (Manually I...
- 08:30 PM Bug #21434 (Closed): After Fixing Bug #21433 -> Error displayed while try to view report for LPA Conformance by area
- Duplicate issue
- 08:28 PM Bug #21434 (Resolved): After Fixing Bug #21433 -> Error displayed while try to view report for LPA Conformance by area
- 08:28 PM Bug #21434 (Fixed in Dev): After Fixing Bug #21433 -> Error displayed while try to view report for LPA Conformance by area
- 07:22 PM Bug #21434 (Open): After Fixing Bug #21433 -> Error displayed while try to view report for LPA Conformance by area
- 07:14 PM Bug #21434 (Closed): After Fixing Bug #21433 -> Error displayed while try to view report for LPA Conformance by area
- After Fixing Bug #21433 -> Error displayed while try to view report for LPA Conformance by area
- 08:26 PM Bug #21440 (Closed): After Fixing Bug #21415 - LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- After Fixing Bug #21434 -> LPA Conformance by area -> The % of conformance & No of check points Ok count is wrong
- 07:38 PM Bug #21437 (Open): All LPA New Reports - Equipment Code Filter should be renamed as "Equipment Category" bot chart and tabular report
- 07:36 PM Bug #21437 (Closed): All LPA New Reports - Equipment Code Filter should be renamed as "Equipment Category" bot chart and tabular report
- All LPA New Reports - Equipment Code Filter should be renamed as "Equipment Category" bot chart and tabular report
- 07:26 PM Bug #21436 (Open): After Fixing Bug #21433 -> Duplicate records are displayed in Department Filter for all LPA new reports
- 07:25 PM Bug #21436 (Closed): After Fixing Bug #21433 -> Duplicate records are displayed in Department Filter for all LPA new reports
- After Fixing Bug #21433 -> Duplicate records are displayed in Department Filter for all LPA new reports
- 07:24 PM Bug #21435 (Open): After Fixing Bug #21433 -> Duplicate records are displayed for all new reports
- 07:23 PM Bug #21435 (Closed): After Fixing Bug #21433 -> Duplicate records are displayed for all new reports
- After Fixing Bug #21433 -> Duplicate records are displayed for all new reports
- 07:13 PM Bug #21433 (Open): After Fixing Bug #21432 -> All Findings reports are not showing the data in shift and failure category filters. Unable to check the report / Error displayed while try to view report for
- 07:13 PM Bug #21433 (Closed): After Fixing Bug #21432 -> All Findings reports are not showing the data in shift and failure category filters. Unable to check the report / Error displayed while try to view report for
- Below reports are not showing data in shift and failure category field.
LPA - Conformance by area
LPA - Finding... - 07:09 PM Bug #21432 (Open): All LPA Findings report is not working / filters are not showing any data
- 07:07 PM Bug #21432 (Closed): All LPA Findings report is not working / filters are not showing any data
1.LPA Audit Adherence : Equipment Type filter is not showing any data even after executing AU Job
2.LPA Conforma...
01/12/2021
- 06:38 PM Bug #21413 (Open): LPA NC Closure (Old) - Tabular View is not showing as per requirement. Equipment's should be displayed as column wise and Other fields should be displayed as Row Wise
- 06:38 PM Bug #21429 (Open): LPA Repeat NC & OFI -> Label Changes in Tabular View
- 06:38 PM Bug #21428 (Open): LPA Repeat NC & OFI -> Various issues in Tabular View
- 06:38 PM Bug #21426 (Open): Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status for Completed and Deadline violated and completed
- 06:38 PM Bug #21425 (Open): Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion Date -> Time is not showing correctly
- 06:38 PM Bug #21424 (Open): Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 2020 audits are there but its not displaying in chart
- 06:38 PM Bug #21423 (Open): Audit - Adherence to Schedule in % (Old) -> Tabular View -> Label changes in tabular view
- 06:38 PM Bug #21422 (Open): Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multiple data's
- 06:38 PM Bug #21420 (Open): LPA Audit Adherence (Old) -> Chart View -> Total Percentage / Completed Percentage is not displaying for the year which is showing 2nd place in chart
- 06:38 PM Bug #21419 (Open): LPA Audit Adherence (Old) -> Tabular View -> In chat , The data's are showing for the Year 2021 and 2023. But in tabular view, 2021 record only displayed. 2023 is not displaying
- 06:38 PM Bug #21417 (Open): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- 06:38 PM Bug #21416 (Open): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- 06:38 PM Bug #21415 (Open): LPA - Conformance By Area (Old) - Error message displayed while opening the report
01/11/2021
- 07:56 PM Bug #21429 (Closed): LPA Repeat NC & OFI -> Label Changes in Tabular View
- 1. Equipment Name should be "Equipment"
2. NC Description should be "Findings Description"
3. Auditee NC Respon... - 07:51 PM Bug #21428 (Closed): LPA Repeat NC & OFI -> Various issues in Tabular View
- LPA Repeat NC & OFI -> Various issues in Tabular View
1. Equipment Type is showing as 3.
2. Shift is not showi... - 07:28 PM Bug #21426 (Closed): Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status for Completed and Deadline violated and completed
- Audit - Adherence to Schedule in % (Old) ->Chart View -> The % of Completion is not correct for various status
- 07:23 PM Bug #21425 (Closed): Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion Date -> Time is not showing correctly
- Audit - Adherence to Schedule in % (Old) -> Tabular View ->Audit Start Planned & Audit End Planned & Audit Completion...
- 07:18 PM Bug #21424 (Closed): Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 2020 audits are there but its not displaying in chart
- Audit - Adherence to Schedule in % (Old) ->Chart View is displaying the data for specific Year and Months. For EX, 20...
- 06:54 PM Bug #21423 (Closed): Audit - Adherence to Schedule in % (Old) -> Tabular View -> Label changes in tabular view
- Audit - Adherence to Schedule in % (Old) -> Tabular View -> Label changes in tabular view
1. Audit Cycle should no... - 06:52 PM Bug #21422 (Closed): Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multiple data's
- Audit - Adherence to Schedule in % (Old) -> Tabular View is showing only one record even though system having multipl...
- 06:18 PM Bug #21420 (Closed): LPA Audit Adherence (Old) -> Chart View -> Total Percentage / Completed Percentage is not displaying for the year which is showing 2nd place in chart
- LPA Audit Adherence (Old) -> Chart View -> Total Percentage / Completed Percentage is not displaying for the year whi...
- 06:13 PM Bug #21419 (Closed): LPA Audit Adherence (Old) -> Tabular View -> In chat , The data's are showing for the Year 2021 and 2023. But in tabular view, 2021 record only displayed. 2023 is not displaying
- LPA Audit Adherence (Old) -> Tabular View -> In chat , The data's are showing for the Year 2021 and 2023. But in tabu...
- 06:06 PM Bug #21417 (Closed): LPA Conformance by Area %-> "No of check points Ok " column is not displayed in tabular report (As per requirement)
- LPA Audit Adherence (Old) -> "No of check points Ok " column is not displayed in tabular report
- 06:05 PM Bug #21416 (Closed): LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should be displayed the whole value like 50%, 45%, 27% instead of 24.565656%
- LPA Audit Adherence (Old) -> Percentage for Completed & Deadline Violated & Completed -> The percentage value should ...
- 05:58 PM Bug #21415 (Closed): LPA - Conformance By Area (Old) - Error message displayed while opening the report
- LPA - Conformance By Area (Old) - Error message displayed while opening the report
- 05:43 PM Bug #21413 (Closed): LPA NC Closure (Old) - Tabular View is not showing as per requirement. Equipment's should be displayed as column wise and Other fields should be displayed as Row Wise
- LPA NC Closure (Old) - Tabular View is not showing as per requirement. Equipment's should be displayed as column wise...
- 05:08 PM Bug #21412 (Open): LPA Excuse Report is showing 0 data's though datas are available
- 05:07 PM Bug #21412 (Closed): LPA Excuse Report is showing 0 data's though datas are available
- LPA Excuse Report is showing 0 data's though datas are available
- 03:37 PM Bug #21411 (Open): LPA Excuse Report -> "LPA Performance" title should be renamed as "LPA Excuse Report"
- 03:37 PM Bug #21411 (Closed): LPA Excuse Report -> "LPA Performance" title should be renamed as "LPA Excuse Report"
- LPA Excuse Report -> "LPA Performance" title should be renamed as "LPA Excuse Report"
- 01:02 PM Bug #21408 (Open): LPA Excuse Performance -> Tabular View in bottom of the report -> Audit Start Date and Audit end Date is not displayed as per administrator user preference
- 01:01 PM Bug #21408 (Closed): LPA Excuse Performance -> Tabular View in bottom of the report -> Audit Start Date and Audit end Date is not displayed as per administrator user preference
- LPA Excuse Performance -> Tabular View in bottom of the report -> Audit Start Date and Audit end Date is not displaye...
- 12:50 PM Bug #21407 (Open): LPA Excuse Performance -> Filters ->Various issues in filter
- 12:49 PM Bug #21407 (Closed): LPA Excuse Performance -> Filters ->Various issues in filter
- 1. Wrong Data’s are displayed in Equipment Type & Equipment Code
2. Equipment Code : Duplicate records are display... - 12:50 PM Bug #21406 (Open): LPA Excuse Performance -> Data's are not displaying for some columns in tabular view on bottom of the report
- 12:43 PM Bug #21406 (Closed): LPA Excuse Performance -> Data's are not displaying for some columns in tabular view on bottom of the report
- LPA Excuse Performance -> Data's are not displaying for some columns in tabular view on bottom of the report
1. Sc... - 12:50 PM Bug #21405 (Open): LPA Excuse Performance -> Label changes in some charts and tabular view in bottom of the report
- 12:31 PM Bug #21405 (Closed): LPA Excuse Performance -> Label changes in some charts and tabular view in bottom of the report
- LPA Excuse Performance -> Charts
1. Auditor Wise Chart -> X axis -> Responsible Person should be renamed as "Audi... - 12:50 PM Bug #21403 (Open): LPA Excuse Performance -> All Charts -> Color Code for various status and representation in tooltip is not displaying (As per requirement)
- 12:24 PM Bug #21403 (Closed): LPA Excuse Performance -> All Charts -> Color Code for various status and representation in tooltip is not displaying (As per requirement)
- LPA Excuse Performance -> All Charts -> Color Code for various status and representation in tooltip is not displaying
- 11:44 AM Bug #21402 (Open): LPA Findings Classification Summary : All Charts -> Tabular data's are not displaying as per specification. Only Count is displayed. The information "Count of Status" is missing
- 11:43 AM Bug #21402 (Closed): LPA Findings Classification Summary : All Charts -> Tabular data's are not displaying as per specification. Only Count is displayed. The information "Count of Status" is missing
- LPA Findings Classification Summary : All Charts -> Tabular data's are not displaying as per specification. Only Coun...
- 11:44 AM Bug #21401 (Open): LPA Findings Classification Summary : ShiftWise and Failure Category Wise NC/OFI & Correction Closeout chart is missing (As per requirement)
- 11:37 AM Bug #21401 (Closed): LPA Findings Classification Summary : ShiftWise and Failure Category Wise NC/OFI & Correction Closeout chart is missing (As per requirement)
- LPA Findings Classification Summary : ShiftWise and Failure Category Wise NC/OFI & Correction Closeout chart is missi...
- 11:08 AM Bug #21400 (Open): LPA Findings Summary & Classification Report : Summary report in bottom : Various issues in this tabular format
- 11:07 AM Bug #21400 (Closed): LPA Findings Summary & Classification Report : Summary report in bottom : Various issues in this tabular format
- LPA Findings Summary & Classification Report : Summary report in bottom : Various issues in this tabular format
... - 11:08 AM Bug #21399 (Open): LPA Findings Summary & Classification & Closure Summary Report : Problem on drill the chart on Process wise NC/OFI and Department wise NC/OFI
- 10:45 AM Bug #21399 (Closed): LPA Findings Summary & Classification & Closure Summary Report : Problem on drill the chart on Process wise NC/OFI and Department wise NC/OFI
- LPA Findings Summary & Classification & Closure Summary Report : Problem on drill the chart on Process wise NC/OFI ...
- 11:08 AM Bug #21398 (Open): LPA Findings Summary & Classification Report : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- 10:43 AM Bug #21398 (Closed): LPA Findings Summary & Classification Report : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- Chart : Process wise NC & OFI : Process name is not displayed . if there is no data mapped, Then the chart should dis...
- 11:08 AM Bug #21397 (Open): LPA Findings Summary Chart : ShiftWise Pareto report is missing (As per requirement)
- 10:39 AM Bug #21397 (Closed): LPA Findings Summary Chart : ShiftWise Pareto report is missing (As per requirement)
- LPA Findings Summary Chart : ShiftWise Pareto report is missing (As per requirement)
- 11:08 AM Bug #21396 (Open): LPA Findings Summary & Classification Report : ALL Chart View : Total count and status count is not displayed
- 10:34 AM Bug #21396 (Closed): LPA Findings Summary & Classification Report : ALL Chart View : Total count and status count is not displayed
- LPA Findings Summary & Classification Report : ALL Chart View : Total count and status count is not displayed
- 09:59 AM Bug #21395 (Open): LPA Findings Summary & Classification Report : All Charts : Label Changes
- 09:58 AM Bug #21395 (Closed): LPA Findings Summary & Classification Report : All Charts : Label Changes
- LPA Findings Summary & Classification Report : All Charts : Label Changes
a. The text “Pareto Chart” has to remo... - 09:54 AM Bug #21394 (Open): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 09:53 AM Bug #21394 (Closed): LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- LPA_Findings Classification Summary & LPA Findings Summary : ALL Chart View : There is no representation about charts...
- 09:48 AM Bug #21393 (Open): LPA Findings Summary / Classification : Overall NC & OFI Count Chart and NC Aging tabular report is missing (As Per Requirement)
- 09:46 AM Bug #21393 (Closed): LPA Findings Summary / Classification : Overall NC & OFI Count Chart and NC Aging tabular report is missing (As Per Requirement)
- LPA Findings Summary : Overall NC & OFI Count Chart and NC Aging tabular report is missing (As Per Requirement)
- 09:47 AM Bug #21392 (Open): LPA Findings Summary & LPA Findings Classification Summary : Equipment Code Filter : All available data's are not displayed
- 09:40 AM Bug #21392 (Closed): LPA Findings Summary & LPA Findings Classification Summary : Equipment Code Filter : All available data's are not displayed
- LPA Findings Summary & LPA Findings Classification Summary : Equipment Code Filter : All available data's are not dis...
- 09:47 AM Bug #21391 (Open): LPA Findings Summary & LPA Findings Classification Summary : Equipment Type Filter : Irrelevant data's are displayed (Only Special characters data which is not available in equipment type list)
- 09:34 AM Bug #21391 (Closed): LPA Findings Summary & LPA Findings Classification Summary : Equipment Type Filter : Irrelevant data's are displayed (Only Special characters data which is not available in equipment type list)
- LPA Findings Summary & LPA Findings Classification Summary : Equipment Type Filter : Irrelevant data's are displayed ...
- 09:15 AM Bug #21390 (Open): Cummins LPA Report -> Menu Icon missing
- 09:14 AM Bug #21390 (Closed): Cummins LPA Report -> Menu Icon missing
- Cummins LPA Report -> Menu Icon missing
1.LPA_FindingsClosure SUMMARY
2.LPA_Findings Summary
3.LPA_FindingsClas...
01/09/2021
01/08/2021
- 02:56 PM Bug #21369 (Reopen): Request needing Approval : Not able to approve the document. Error Occurs
- 02:43 PM Bug #21369 (Closed): Request needing Approval : Not able to approve the document. Error Occurs
- 02:43 PM Bug #21369 (Resolved): Request needing Approval : Not able to approve the document. Error Occurs
- 12:32 PM Bug #21369 (Fixed with Hotfix): Request needing Approval : Not able to approve the document. Error Occurs
- 12:26 AM Bug #21369 (Fixed in Dev): Request needing Approval : Not able to approve the document. Error Occurs
- 12:26 AM Bug #21369 (Open): Request needing Approval : Not able to approve the document. Error Occurs
- 02:55 PM Bug #21356 (Resolved): Change Request: Click on Delete document and uncheck it . Reference attachment option is not displayed
- 12:32 PM Bug #21356 (Fixed with Hotfix): Change Request: Click on Delete document and uncheck it . Reference attachment option is not displayed
- 12:24 AM Bug #21356 (Fixed in Dev): Change Request: Click on Delete document and uncheck it . Reference attachment option is not displayed
- 12:24 AM Bug #21356 (Open): Change Request: Click on Delete document and uncheck it . Reference attachment option is not displayed
- 02:53 PM Bug #21365 (Resolved): New Doc Draft- Error Occurs while requesting draft without reference attachement.The page gets blank ( Same for Doc to Draft )
- 12:32 PM Bug #21365 (Fixed with Hotfix): New Doc Draft- Error Occurs while requesting draft without reference attachement.The page gets blank ( Same for Doc to Draft )
- 12:24 AM Bug #21365 (Fixed in Dev): New Doc Draft- Error Occurs while requesting draft without reference attachement.The page gets blank ( Same for Doc to Draft )
- 12:24 AM Bug #21365 (Open): New Doc Draft- Error Occurs while requesting draft without reference attachement.The page gets blank ( Same for Doc to Draft )
- 02:50 PM Bug #21366 (Closed): Pending Document Draft /Draft Request Needing viewing - No response on clicking on the Reference attachment link from the pop up
- 02:50 PM Bug #21366 (Resolved): Pending Document Draft /Draft Request Needing viewing - No response on clicking on the Reference attachment link from the pop up
- 12:32 PM Bug #21366 (Fixed with Hotfix): Pending Document Draft /Draft Request Needing viewing - No response on clicking on the Reference attachment link from the pop up
- 12:24 AM Bug #21366 (Fixed in Dev): Pending Document Draft /Draft Request Needing viewing - No response on clicking on the Reference attachment link from the pop up
- 12:24 AM Bug #21366 (Open): Pending Document Draft /Draft Request Needing viewing - No response on clicking on the Reference attachment link from the pop up
- 02:49 PM Bug #21368 (Closed): NEw Doc Request : On uploading more file and editing the Document number and name, Error occurs in between
- 02:49 PM Bug #21368 (Resolved): NEw Doc Request : On uploading more file and editing the Document number and name, Error occurs in between
- 12:32 PM Bug #21368 (Fixed with Hotfix): NEw Doc Request : On uploading more file and editing the Document number and name, Error occurs in between
- 12:26 AM Bug #21368 (Fixed in Dev): NEw Doc Request : On uploading more file and editing the Document number and name, Error occurs in between
- Not able to replicate
- 12:25 AM Bug #21368 (Open): NEw Doc Request : On uploading more file and editing the Document number and name, Error occurs in between
- 12:32 PM Bug #21260 (Fixed with Hotfix): Master can be removed from the label and can keep the label as Classification,Category & Management Systesm master
- 12:32 PM Bug #21123 (Fixed with Hotfix): Category menu:- Retention period is blank
- 12:32 PM Bug #21120 (Fixed with Hotfix): TOC> Additional info screen : The time in the origin date field shows 12.00.00 AM all the time
- 12:32 PM Bug #21088 (Fixed with Hotfix): Change Request - In the initial state the Document type should be of what the document already has, on clicking on Change request the doc type shows 'Others' but it has to display Process Standards
- 12:32 PM Unit Level and Cosmetic Issues #21087 (Fixed with Hotfix): Additional info Label missing
- 12:32 PM Bug #21086 (Fixed with Hotfix): Error occurs while publishing documents after enabling ( Not replicating )
- 12:31 PM Bug #21370 (Fixed with Hotfix): Document TOC- Dos to Draft screen alignment has no proper alignment
- 12:30 PM Bug #21370 (Resolved): Document TOC- Dos to Draft screen alignment has no proper alignment
- 12:26 AM Bug #21370 (Fixed in Dev): Document TOC- Dos to Draft screen alignment has no proper alignment
- 12:26 AM Bug #21370 (Open): Document TOC- Dos to Draft screen alignment has no proper alignment
- 11:06 AM Bug #21373 (Closed): R2, R3,R4, R5 and R6 Requirement --> For GRR no need to display the inactive, lost, out for repair, In calibration, Pending for calibration, obselete, replace status into the link. We have to display only the active status
- R2, R3,R4, R5 and R6 Requirement --> For GRR no need to display the inactive, lost, out for repair, In calibration, P...
01/07/2021
- 09:23 PM Bug #21330 (Resolved): TOC- Rename the Reference attachment link name to "view" instead of showing Reference attachment again
- 11:17 AM Bug #21330 (Fixed in Dev): TOC- Rename the Reference attachment link name to "view" instead of showing Reference attachment again
- 11:17 AM Bug #21330 (Open): TOC- Rename the Reference attachment link name to "view" instead of showing Reference attachment again
- 09:23 PM Bug #21303 (Resolved): Change Request - On selecting the Delete Document check box, no need of displaying the reference attachment button
- 11:16 AM Bug #21303 (Fixed in Dev): Change Request - On selecting the Delete Document check box, no need of displaying the reference attachment button
- 11:16 AM Bug #21303 (Open): Change Request - On selecting the Delete Document check box, no need of displaying the reference attachment button
- 09:22 PM Bug #21302 (Resolved): New Doc Request - After adding the document, the reference attachment is still editable.
- 11:14 AM Bug #21302 (Fixed in Dev): New Doc Request - After adding the document, the reference attachment is still editable.
- 11:14 AM Bug #21302 (Open): New Doc Request - After adding the document, the reference attachment is still editable.
- 08:40 PM Bug #21370 (Closed): Document TOC- Dos to Draft screen alignment has no proper alignment
- Document TOC- Dos to Draft screen alignment has no proper alignment
- 08:34 PM Bug #21369 (Closed): Request needing Approval : Not able to approve the document. Error Occurs
- Request needing Approval: Not able to approve the document. Error Occurs
- 08:29 PM Bug #21368 (Closed): NEw Doc Request : On uploading more file and editing the Document number and name, Error occurs in between
- NEw Doc Request : On uploading more file and editing the Document number and name, Error occurs in between
- 08:26 PM Bug #21367 (Closed): Draft Request Needing Viewing: Attachment- Clicking on send after attaching attachment(before loading) it listing as a blank comment in the comment section
- Draft Request Needing Viewing: Attachment- Clicking on send after attaching attachment(before loading) it listing as ...
- 08:18 PM Bug #21366 (Closed): Pending Document Draft /Draft Request Needing viewing - No response on clicking on the Reference attachment link from the pop up
- Pending Document Draft /Draft Request Needing viewing - No response on clicking on the Reference attachment link from...
- 08:14 PM Bug #21365 (Closed): New Doc Draft- Error Occurs while requesting draft without reference attachement.The page gets blank ( Same for Doc to Draft )
- New Doc Draft- Error Occurs while requesting draft without reference attachement.The page gets blank
- 06:27 PM Bug #21356 (Closed): Change Request: Click on Delete document and uncheck it . Reference attachment option is not displayed
- Change Request: Click on Delete document and uncheck it . Reference attachment option is not displayed
- 06:24 PM Bug #21355 (Closed): New Doc Request - While uploading documents there is no loading symbol
- New Doc Request - While uploading documents there is no loading symbol
01/06/2021
- 01:36 PM Bug #21331 (Closed): New Document Draft : The Attach Doc and Reference attachment choose field alignment is not proper
- New Document Draft : The Attach Doc and Reference attachment choose field alignment is not proper
- 01:34 PM Bug #21330 (Closed): TOC- Rename the Reference attachment link name to "view" instead of showing Reference attachment again
- TOC- Rename the Reference attachment link name to view instead of showing Reference attachment again
01/05/2021
- 08:23 PM Bug #21324 (Closed): R2 Requirement --> Copy gage --> When user tries to copy gage the data, the data of Key device and assurance factory should not display for newly creating screen
- R2 Requirement --> Copy gage --> When user tries to copy gage the data, the data of Key device and assurance factory ...
- 08:16 PM Bug #21323 (Closed): R2 Requirement --> The data should display in following order, 1. Site 2. Gage Number 3. Gage Type 4. Usage Location 5. GRR Date 6. GRR Result 7. Key Factor 8. Assurance Factor
- Issue 1: R2 Requirement --> The data should display in following order, 1. Site 2. Gage Number 3. Gage Type 4. Usage ...
- 06:25 PM Bug #21322 (Closed): R2 Requirement --> Gage No CEE-474) -->(Both variable and Attribute) The GRR date is showing wrongly, here it is showing as 4/26/2019. In study it showing like "4/18/2019".
- Issue 1: R2 Requirement --> Gage No CEE-474) --> The GRR date is showing wrongly, here it is showing as 4/26/2019. In...
- 05:55 PM Bug #21260 (Fixed in Dev): Master can be removed from the label and can keep the label as Classification,Category & Management Systesm master
- 05:55 PM Bug #21260 (Open): Master can be removed from the label and can keep the label as Classification,Category & Management Systesm master
01/04/2021
- 05:56 PM Bug #21303 (Closed): Change Request - On selecting the Delete Document check box, no need of displaying the reference attachment button
- Change Request - On selecting the Delete Document check box, no need of displaying the reference attachment button
- 05:37 PM Bug #21302 (Closed): New Doc Request - After adding the document, the reference attachment is still editable.
- New Doc Request - After adding the document, the reference attachment is still editable.
12/31/2020
- 02:58 AM Bug #21288 (Open): Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- 02:57 AM Bug #21288 (Closed): Cummins LPA Report -> Menu & Access Right is missing for newly added reports
- Cummins LPA Report -> Menu & Access Right is missing for newly added reports
1. LPA_FindingsClosure
2. LPA_Finding... - 02:54 AM Bug #21286 (Open): LPA_Findings Closure & LPA Findings Summary & Classification Report : Drill Indication – Hand icon is not displaying on chart for equipment wise NC/OFI
- 02:51 AM Bug #21286 (Closed): LPA_Findings Closure & LPA Findings Summary & Classification Report : Drill Indication – Hand icon is not displaying on chart for equipment wise NC/OFI
- LPA_Findings Closure & LPA Findings Summary & Classification Report : Drill Indication – Hand icon is not displaying...
- 02:54 AM Bug #21285 (Open): LPA_Findings Closure & LPA Findings Summary & Classification Report :All chars and tabular View : Responsible person name should be displayed as per web application ( As per settings)
- 02:51 AM Bug #21285 (Closed): LPA_Findings Closure & LPA Findings Summary & Classification Report :All chars and tabular View : Responsible person name should be displayed as per web application ( As per settings)
- LPA_Findings Closure & LPA Findings Summary & Classification Report :All chars and tabular View : Responsible person...
- 02:54 AM Bug #21284 (Open): LPA_Findings Closure : All charts : The status is not showing as per application (All Status).. In application 7 Not closed out and 2 closed out data's are there. But in report not closed out 8, closed out 0 is displaying.
- 02:50 AM Bug #21284 (Closed): LPA_Findings Closure : All charts : The status is not showing as per application (All Status).. In application 7 Not closed out and 2 closed out data's are there. But in report not closed out 8, closed out 0 is displaying.
- All charts : The status is not showing as per application (All Status).. In application 7 Not closed out and 2 closed...
- 02:54 AM Bug #21283 (Open): LPA_FindingsClosure : Chart : Shiftwise Pareto report is missing (As per requirement)
- 02:49 AM Bug #21283 (Closed): LPA_FindingsClosure : Chart : Shiftwise Pareto report is missing (As per requirement)
- 02:54 AM Bug #21282 (Open): LPA_FindingsClosure : Summary Report In bottom: The below column name has to change
- 02:48 AM Bug #21282 (Closed): LPA_FindingsClosure : Summary Report In bottom: The below column name has to change
- Summary Report In bottom: The below column name has to change
a. “NC Ageing” should be renamed as “Findings Aging... - 02:54 AM Bug #21281 (Open): LPA_FindingsClosure : Summary Report In bottom : Days Taken / Exceeded to close the nc : The showing data is not relevant with actual days
- 02:47 AM Bug #21281 (Closed): LPA_FindingsClosure : Summary Report In bottom : Days Taken / Exceeded to close the nc : The showing data is not relevant with actual days
- LPA_FindingsClosure : Summary Report In bottom : Days Taken / Exceeded to close the nc : The showing data is not rele...
- 02:54 AM Bug #21280 (Open): LPA_Findings Closure - Summary Report In bottom : Problem on viewing data's
- 02:46 AM Bug #21280 (Closed): LPA_Findings Closure - Summary Report In bottom : Problem on viewing data's
- Summary Report In bottom: The below columns are not showing the data though its available
a. Shift
b. Failure C... - 02:54 AM Bug #21279 (Open): LPA_Findings Closure : Summary Report In bottom : Only one record is displayed. But in chart couple of data’s available
- 02:44 AM Bug #21279 (Closed): LPA_Findings Closure : Summary Report In bottom : Only one record is displayed. But in chart couple of data’s available
- LPA_Findings Closure : Summary Report In bottom : Only one record is displayed. But in chart couple of data’s available
- 02:54 AM Bug #21278 (Open): LPA_FindingsClosure : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- 02:42 AM Bug #21278 (Closed): LPA_FindingsClosure : All Charts : Issues in Chart : Process wise NC & OFI / Department wise NC & OFI
- Chart : Process wise NC & OFI : Process name is not displayed . if there is no data mapped, Then the chart should dis...
- 02:54 AM Bug #21277 (Open): LPA_FindingsClosure : All Charts View : Total count and status count is not displayed
- 02:41 AM Bug #21277 (Closed): LPA_FindingsClosure : All Charts View : Total count and status count is not displayed
- LPA_FindingsClosure : All Charts View : Total count and status count is not displayed
- 02:54 AM Bug #21276 (Open): LPA_FindingsClosure : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- 02:40 AM Bug #21276 (Closed): LPA_FindingsClosure : ALL Chart View : There is no representation about charts like Total count , and for other status “Completed and Closed Out, Completed and not Closed Out, Etc…
- LPA_FindingsClosure : ALL Chart View : There is no representation about charts like Total count , and for other statu...
- 02:54 AM Bug #21275 (Open): LPA_FindingsClosure : All Charts : Label Changes
- 02:40 AM Bug #21275 (Closed): LPA_FindingsClosure : All Charts : Label Changes
- All Charts : Label Changes
a. The text “Pareto Chart” has to remove from chart
b. The text “Equipment Family” s... - 02:54 AM Bug #21274 (Open): LPA_FindingsClosure : Filter – Category : Relevant data’s are not displayed
- 02:38 AM Bug #21274 (Closed): LPA_FindingsClosure : Filter – Category : Relevant data’s are not displayed
- LPA_FindingsClosure : Filter – Category : Relevant data’s are not displayed
- 02:54 AM Bug #21273 (Open): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- 02:37 AM Bug #21273 (Closed): All New reports -> All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
- All Filters – Based on the site the filters has to show the data . Now corporate data’s showing for all sites
a. ... - 02:54 AM Bug #21272 (Open): LPA Findings Closure : Filter – Equipment Category : Duplicate Records are displayed
- 02:34 AM Bug #21272 (Closed): LPA Findings Closure : Filter – Equipment Category : Duplicate Records are displayed
- LPA Findings Closure : Filter – Equipment Category : Duplicate Records are displayed
- 02:54 AM Bug #21270 (Open): LPA_Findings Closure : Filters -> Wrong Data’s are displayed in Equipment Type & Equipment Code
- 02:32 AM Bug #21270 (Closed): LPA_Findings Closure : Filters -> Wrong Data’s are displayed in Equipment Type & Equipment Code
- 1. Filter - Equipment Type : Wrong Data’s are displayed.(Equipment Code is displayed here)
2. Filter - Equipment C...
12/30/2020
- 04:04 AM Bug #21020 (Closed): SP10.5.0 Hotfix -> System taking some time to show success message while clicking on Save button after providing effect verified as no with comments
- 04:04 AM Bug #21020 (Resolved): SP10.5.0 Hotfix -> System taking some time to show success message while clicking on Save button after providing effect verified as no with comments
- 04:03 AM Bug #21020 (Fixed in Dev): SP10.5.0 Hotfix -> System taking some time to show success message while clicking on Save button after providing effect verified as no with comments
- 04:03 AM Bug #21022 (Not Resolved): SP10.5.0 Hotfix -> Perform audit / Upload NC & OFI -> Findings Category is overlapping if more no of character's present
- 04:03 AM Bug #21022 (Resolved): SP10.5.0 Hotfix -> Perform audit / Upload NC & OFI -> Findings Category is overlapping if more no of character's present
- 04:03 AM Bug #21022 (Fixed in Dev): SP10.5.0 Hotfix -> Perform audit / Upload NC & OFI -> Findings Category is overlapping if more no of character's present
- 03:48 AM Bug #21018 (Not Resolved): SP10.5.0 Hotfix -> Label Changes in audit pro
- Not Resolved
- 03:47 AM Bug #21018 (Resolved): SP10.5.0 Hotfix -> Label Changes in audit pro
- 03:22 AM Bug #21017 (Closed): SP10.5.0 Hotfix -> Perform audit List View is not displaying
- Verified in CY12 build
- 03:21 AM Bug #21017 (Resolved): SP10.5.0 Hotfix -> Perform audit List View is not displaying
12/29/2020
- 08:55 PM Bug #21264 (Closed): Retention Period: Others text should be mandatory. Without entering text for others option, its saving null
- Retention Period: Others text should be mandatory. Without entering text for others option, its saving null
- 06:45 PM Unit Level and Cosmetic Issues #21081 (Closed): Classification, Category Master & Management Systems Master - There is no Mandatory indication in the creation pop up screens
- 06:25 PM Bug #21078 (Closed): Classification, Category Master & Management Systems Master - Retention period is allowing to enter the alphabets in Min and Max period
- 06:23 PM Bug #21077 (Closed): Classification, Category Master & Management Systems Master - Edit and Delete (action icons) is not working for Category master and Management system master
- 06:22 PM Bug #21190 (Closed): Classification, Category Master & Management Systems Master: The system should not allow the user to delete the data been used . It should throw alert saying ' Dependency Exists'
12/28/2020
- 08:21 PM Bug #21263 (Closed): New document request: Master details: Once selecting the value from the dropdown, its not closed automatically(all3 master
- New document request: Master details: Once selecting the value from the dropdown, its not closed automatically
- 07:27 PM Bug #21262 (Closed): Classification,category and mgmt sys master: Accordian is not working as expected. Category master grid is showing even the user clicks the mgmt sys master
- Classification,category and mgmt sys master: Accordian is not working as expected. Category master grid is showing ev...
- 07:16 PM Bug #21261 (Closed): Category Master: Retention period is showing by default, but when its been edited and saved its not showing by default. The user needs to click and see the details
- Category Master: Retention period is showing by default, but when its been edited and saved its not showing by defaul...
- 07:11 PM Bug #21260 (Closed): Master can be removed from the label and can keep the label as Classification,Category & Management Systesm master
- Master can be removed from the label and can keep the label as Classification,Category & Management Systesm master
- 01:54 PM Bug #21086 (Fixed in Dev): Error occurs while publishing documents after enabling ( Not replicating )
- not able to replicate
- 01:54 PM Bug #21086 (Open): Error occurs while publishing documents after enabling ( Not replicating )
- 01:54 PM Bug #21120 (Fixed in Dev): TOC> Additional info screen : The time in the origin date field shows 12.00.00 AM all the time
- 01:53 PM Bug #21120 (Open): TOC> Additional info screen : The time in the origin date field shows 12.00.00 AM all the time
- 01:53 PM Bug #21190 (Resolved): Classification, Category Master & Management Systems Master: The system should not allow the user to delete the data been used . It should throw alert saying ' Dependency Exists'
- 01:53 PM Bug #21190 (Fixed in Dev): Classification, Category Master & Management Systems Master: The system should not allow the user to delete the data been used . It should throw alert saying ' Dependency Exists'
- 01:46 PM Bug #21190 (Open): Classification, Category Master & Management Systems Master: The system should not allow the user to delete the data been used . It should throw alert saying ' Dependency Exists'
- 01:53 PM Bug #21077 (Resolved): Classification, Category Master & Management Systems Master - Edit and Delete (action icons) is not working for Category master and Management system master
- 01:52 PM Unit Level and Cosmetic Issues #21079 (Resolved): Classification, Category Master & Management Systems Master - Page design issues
- 01:52 PM Unit Level and Cosmetic Issues #21081 (Resolved): Classification, Category Master & Management Systems Master - There is no Mandatory indication in the creation pop up screens
- 01:51 PM Unit Level and Cosmetic Issues #21117 (Open): Change Request : The origin date file look like non editable , the mouse pointer also showing non editable symbol
- Not an issue datefiled will be non editable only
- 01:51 PM Bug #21078 (Resolved): Classification, Category Master & Management Systems Master - Retention period is allowing to enter the alphabets in Min and Max period
- 01:50 PM Bug #21088 (Fixed in Dev): Change Request - In the initial state the Document type should be of what the document already has, on clicking on Change request the doc type shows 'Others' but it has to display Process Standards
- 01:50 PM Bug #21088 (Open): Change Request - In the initial state the Document type should be of what the document already has, on clicking on Change request the doc type shows 'Others' but it has to display Process Standards
- 01:50 PM Bug #21123 (Fixed in Dev): Category menu:- Retention period is blank
- 01:48 PM Bug #21123 (Open): Category menu:- Retention period is blank
- 01:35 PM Bug #21258 (Closed): Retention period popup is goin somewhere when trying to drag and drop
- Retention period popup is goin somewhere when trying to drag and drop
- 11:04 AM Usability #21229 (Open): 10.5.0 hotfix-> Need to remove and add the manadatory in Audit pro
12/24/2020
- 01:53 AM Bug #20968: Calendar view is not loading in audit scheduled page.
- Not fixed
- 01:51 AM Bug #20971: Req:Audit specific Scope and Focus-> Icon is missing and label change in planned audit
- fixed
- 01:46 AM Bug #21060: Responsible person for Audit report Publish: While click on the report it throw a error as data tables warning error
- Verified
- 01:45 AM Bug #21061: Responsible person for Audit report Publish : Audit number should be clickable in Report
login/meena/a1
chennai entity
click on schedule audit
- 01:36 AM Bug #21085: Audit schedule-> Audit cycle is not redirect to correct location in schedule page
- Audit cycle option is missing
- 01:34 AM Bug #21108: Scheduler-> list view->Lead author and Audit status details are not proper.
- verified
12/23/2020
- 01:15 PM Usability #21229 (Closed): 10.5.0 hotfix-> Need to remove and add the manadatory in Audit pro
- 1) need to remove mandatory symbol for allow audits from, Publish the audit after end date,Audit id definitions
- 12:50 PM Unit Level and Cosmetic Issues #21087 (Fixed in Dev): Additional info Label missing
- 12:50 PM Unit Level and Cosmetic Issues #21087 (Open): Additional info Label missing
- 05:06 AM Usability #21115: Perform audit -> Responsible person -> It should show two user. Currently it show only one user
- As discussed in sprint 2, responsible need to remove in perform audit
- 05:04 AM Bug #21116: Auditee-> Corrective action -> Audit is displayed but nc is not displayed in corrective action ,
- Fixed
12/22/2020
- 12:56 PM Bug #21219 (Closed): PDF Template: Sample PDF Preference displays blank page
- PDF Template: Sample PDF Preference displays blank page
12/21/2020
- 12:15 PM Bug #21190 (Closed): Classification, Category Master & Management Systems Master: The system should not allow the user to delete the data been used . It should throw alert saying ' Dependency Exists'
- Classification, Category Master & Management Systems Master: The system should not allow the user to delete the data ...
- 12:13 PM Bug #21006 (Fixed in Dev): CSD menu : When CSD Details filled with Special Characters save and Retrieve Added data is not displaying fields after retrieve
- 12:09 PM Bug #21004 (Fixed in Dev): CSD Menu : Entered date in CSD menus to be display with tool tip and When more data entered validation to be display saying Should not exceed the limit of characters some thing like that.
- 12:03 PM Bug #21002 (Fixed in Dev): CSD Menu : System is allowing to save CSD menu without Specifying any data instead system should display validation
- This is not an issue....Category,classification and Retention period can be *empty values*
- 12:00 PM Bug #20968 (Fixed in Dev): Calendar view is not loading in audit scheduled page.
- 10:57 AM Unit Level and Cosmetic Issues #21079 (Fixed in Dev): Classification, Category Master & Management Systems Master - Page design issues
Also available in: Atom