Activity - SP925 - OMNEX ISSUE TRACKER

Activity

From 01/27/2020 to 02/25/2020

02/25/2020

12:43 PM Bug #15685 (Closed): Supplier Report-Audit score Report-Though no nc raised while performing VEM in audit report it shows 1 in Red: Supplier Report-Audit score Report-Though no nc raised while performing VEM in audit report it shows 1 in Red Saradha Balan
12:41 PM Bug #15684 (Closed): Supplier Report-Audit score report-Score shows mismatch between audit report and audit performed.Refer screen shot: Supplier Report-Audit score report-Score shows mismatch between audit report and audit performed.Refer screen shot Saradha Balan

02/24/2020

12:19 PM Bug #15683 (Closed): Supplier Reports-Based on the filter report is not showing instead it is showing all the data: Supplier Reports-Based on the filter report is not showing instead it is showing all the data Saradha Balan
12:18 PM Bug #15682 (Closed): Supplier Report-Reports showing both VAm and VEM reports instead it should show only VEM reports: Supplier Report-Reports showing both VAm and VEM reports instead it should show only VEM reports Saradha Balan
11:08 AM Bug #15681 (Closed): Supplier Report-Site specific filter is not available.Report shows data from all the sites related to filter: Supplier Report-Site specific filter is not available.Report shows data from all the sites related to filter Saradha Balan

02/21/2020

12:43 PM Bug #15680 (Closed): VEM audit calender-Tentative event audit unable to confirm using update option as on clicking audit the details not getting loaded: VEM audit calender-Tentative event audit unable to confirm using update option as on clicking audit the details not g... Saradha Balan
12:31 PM Bug #15679 (Closed): There is no alert to notify map segment has not mapped to audit program.During VEM audit schedule "Schedule created" alert has displayed but no audit generated because of not mapping segment: There is no alert to notify map segment has not mapped to audit program.During VEM audit schedule "Schedule created" ... Saradha Balan
10:18 AM Bug #15678 (Closed): Supplier Report:Report shows only commodity audits not showing audit done for parts mapped to those commodity: Supplier Report:Report shows only commodity audits not showing audit done for parts mapped to those commodity Saradha Balan

02/20/2020

04:47 PM Bug #15677 (Closed): Supplier Report:SQIE not listing auditor name specific to audit instead it shows all SQI assigned for the supplier: Supplier Report:SQIE not listing auditor name specific to audit instead it shows all SQI assigned for the supplier Saradha Balan

02/18/2020

07:56 PM Bug #15671: VAM-corrective action close out-unable to import error alert is displaying: WAD. PFA Nikhil d
07:01 PM Bug #15671 (Open): VAM-corrective action close out-unable to import error alert is displaying: VAM-corrective action close out-unable to import error alert is displaying Saradha Balan
07:45 PM Bug #15669: while importng checklists and if have session issue imported checklists reflected in auditpro not in supplier portal: Cannot able to replicate again by QA Nikhil d
06:59 PM Bug #15669 (Open): while importng checklists and if have session issue imported checklists reflected in auditpro not in supplier portal: while importng checklists and if have session issue imported checklists reflected in auditpro not in supplier portal Saradha Balan
07:19 PM Bug #15665 (Resolved): Audit scheduled from corporate for different site not listing in corresponding site perform audit page: Nikhil d
07:19 PM Bug #15665 (Open): Audit scheduled from corporate for different site not listing in corresponding site perform audit page: Wrong Scenario. Not an issue Nikhil d
06:59 PM Bug #15670 (Resolved): Unable to export VAM publish report in firefox: Unable to export VAM publish report in firefox Saradha Balan
06:57 PM Bug #15668 (Resolved): No option to create sub business unit in Business Unit master screen: No option to create sub business unit in Business Unit master screen Saradha Balan

02/17/2020

03:58 PM Bug #15666 (Resolved): Unable to delete schedule audit from update/delete schedule audit page: Nikhil d
03:58 PM Bug #15666 (Open): Unable to delete schedule audit from update/delete schedule audit page: Cannot Able To replicate Nikhil d
02:54 PM Bug #15666 (Closed): Unable to delete schedule audit from update/delete schedule audit page: Unable to delete schedule audit from update/delete schedule audit page Saradha Balan
02:46 PM Bug #15665 (Closed): Audit scheduled from corporate for different site not listing in corresponding site perform audit page: Audit scheduled from corporate for different site not listing in corresponding site perform audit page Saradha Balan
01:08 PM Bug #15664 (Resolved): View supply chain button is available for a supplier created from suite have no add part option: View supply chain button is available for a supplier created from suite have no add part option Saradha Balan
01:05 PM Bug #15663 (Open): Creating supplier form Suite but without adding part option(no risks has selected),still Add/View doc option available.No need these if no option for add parts: Creating supplier form Suite but without adding part option(no risks has selected),still Add/View doc option availabl... Saradha Balan
12:29 PM Bug #15662 (Resolved): Unable to create supplier from Suite: Unable to create supplier from Suite Saradha Balan
12:18 PM Bug #15661 (Open): Part number missing in view doc page if part tree loaded by PARTS: Part number missing in view doc page if part tree loaded by PARTS Saradha Balan
12:16 PM Bug #15660 (Open): If same part name/number for two plants then it shows multiple times in document type master page.Refer screen shot: If same part name/number for two plants then it shows multiple times in document type master page Saradha Balan
12:15 PM Bug #15659 (Open): Duplicate plant name displaying in document type master(forms and checklists doesn't have documents added).Refer screen shot: Duplicate plant name displaying in document type master(forms and checklists doesn't have documents added) Saradha Balan
12:13 PM Bug #15658 (Open): Doc type master-Attach from local-file status shows as error(xl file): Doc type master-Attach from local-file status shows as error(xl file) Saradha Balan

02/14/2020

04:52 PM Bug #15656 (Closed): Reports-Adherence Report-VEM audit-If an audit has updated with new date then it is not showing in the report: Reports-Adherence Report-VEM audit-If an audit has updated with new date then it is not showing in the report Saradha Balan
04:35 PM Bug #15655 (Closed): Reports-Adherence Report-VEM audit-If an audit contains two commodities then only one commodity is alone showing in report: Reports-Adherence Report-VEM audit-If an audt contains two commodities then only one commodity is alone showing in re... Saradha Balan

02/11/2020

07:26 PM Bug #15467 (Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance: As of now we don't have any option to handle in build. It's need to be done by Suite team.
need to discuss with bi... Anonymous

02/10/2020

01:04 PM Bug #15467 (Not Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance: Manual Insert is OK. But need to handled in build without any manual work. Raja S

02/07/2020

05:32 PM Bug #15356 (Closed): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.: Anonymous
05:32 PM Bug #15356: Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.: Verified Anonymous
05:32 PM Bug #15429 (Closed): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.: Closed Anonymous
11:58 AM Bug #15241 (Not Resolved): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist: Anonymous
11:58 AM Bug #15241: Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist: Still the issue occur Anonymous
11:51 AM Bug #15640 (Closed): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot: Verified Anonymous
09:44 AM Bug #15643 (Open): Actions Menu: For the Created Single Action in DFMEA its displaying Multiple Actions in the same name in Actions Menu: User Admin

02/06/2020

05:53 PM Bug #15641 (Closed): My Dashboard issue: Please refer the description.: User Admin
05:11 PM Bug #15359 (Closed): Multi site: Email->Email link is not redirecting to correct location: Anonymous
05:10 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location: Verified by sara.Closing this issue Anonymous
05:06 PM Bug #15359 (Resolved): Multi site: Email->Email link is not redirecting to correct location: User Admin
11:32 AM Bug #15643 (Open): Actions Menu: For the Created Single Action in DFMEA its displaying Multiple Actions in the same name in Actions Menu: In the DFMEA if the User creating a Single Action and by viewing it in Actions Menu its displaying as Multiple Action... Anonymous

02/05/2020

05:59 PM Bug #15397 (Closed): Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed: Verified in CY-9 and Closed Anonymous
03:51 PM Bug #15523 (Closed): ITAR document is going to NON ITAR Approver. PFB the scenario: Ragavi Ram
03:39 PM Bug #15630 (Reopen): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.: Ragavi Ram

02/04/2020

05:44 PM Bug #15642 (Closed): Date gets reduced to the previous day during publishing—Check by changing the time zone: HTTPS: Date gets reduced to the previous day during publishing—Check by changing the time zone Anonymous
02:57 PM Bug #15241 (Resolved): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist: Prabhu P
02:48 PM Bug #15630 (Closed): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.: Couldnt replicate this, so closing the issue Anonymous
02:33 PM Bug #15472 (Closed): Https : Inprocess Inspection sheet is not opening and In chart data is not displaying: Anonymous
01:28 PM Bug #15483 (Closed): HTTPS: Admin actions: Pending doc drafts shows the wrong count in LHS: closed in cy 8 Anonymous
01:27 PM Bug #15603 (Closed): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.: Closed in cy 8 Anonymous
01:27 PM Bug #15603 (Fixed with Hotfix): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.: Anonymous
12:55 PM Bug #15602 (Closed): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments): After Discussion with Biju and Rangaraj -> Close icon is removed for all the widgets across modules and Verified Expa... Anonymous
12:43 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.: Anonymous
12:43 PM Bug #15397 (Resolved): Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed: Anonymous
11:21 AM Bug #15640 (Resolved): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot: Nikhil d

02/03/2020

05:51 PM Bug #15630: New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.: Will check in next build and update Anonymous
04:46 PM Bug #15630 (Resolved): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.: Not able to replicate Jacqueline Antonette
05:50 PM Bug #15523: ITAR document is going to NON ITAR Approver. PFB the scenario: Will check in next build and update Anonymous
04:45 PM Bug #15523 (Resolved): ITAR document is going to NON ITAR Approver. PFB the scenario: Not able to replicate Jacqueline Antonette
02:20 PM Bug #15359 (Not Resolved): Multi site: Email->Email link is not redirecting to correct location: Anonymous
02:20 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location: Email is not generating for multi-site Anonymous
01:51 PM Bug #15633 (Closed): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen: User Admin
10:02 AM Bug #15633 (Resolved): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen: User Admin
01:50 PM Bug #15591 (Closed): Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inherited for checklists 'parent has score' alert keep on displaying: Closing this issue and we could not able to reproduce it User Admin
01:49 PM Bug #15639 (Closed): Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not showing properly: Closing this issue and we could not able to reproduce it User Admin
01:48 PM Bug #15639 (Open): Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not showing properly: User Admin
01:48 PM Bug #15641 (Open): My Dashboard issue: Please refer the description.: User Admin
12:45 PM Bug #15641 (Closed): My Dashboard issue: Please refer the description.: 1)When Clicking on dashboard redirect arrow : No Response.
2)Click on the Whitespace, Now the arrow gets disappears. Anonymous
01:48 PM Bug #15640 (Open): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot: User Admin
01:10 PM Bug #15390 (Closed): Report -> Audit Repeat NC -> Various finding status is missing: Raja S
12:59 PM Bug #15451 (Closed): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection: Raja S
12:41 PM Bug #15451 (Not Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection: Not working as expected on any time period. Raja S
12:50 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.: Raja S
12:39 PM Bug #15581 (Closed): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message: Verified in SP_925 CY-7 Build and Closed Anonymous
12:35 PM Suggestion #15564 (Closed): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function: As discussed with Pradeepa, Add ASIL option for parent element can be displayed and REQT ASIl can also be changed. So... Shankar Narayanan
12:32 PM Suggestion #15564 (Resolved): FSR - Same dialog window is displayed while Add ASIL is done for Decomposed Function and Parent Function: User Admin
10:26 AM Bug #15422 (Closed): Report -> Auditor Utilization -> Wrong Count is displayed for an auditor utilized hrs: As discussed with biju and bijoy on 30-01-20202 , the report is not included in the build - SP925 Final cycle (8) Raja S
10:25 AM Bug #15626 (Closed): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized": As discussed with biju and bijoy on 30-01-20202 , the report is not included in the build - SP925 Final cycle (8) Raja S
10:25 AM Bug #15627 (Closed): Auditor Utilization -> Utilization type is not working as expected: As discussed with biju and bijoy on 30-01-20202 , the report is not included in the build - SP925 Final cycle (8) Raja S
09:53 AM Bug #15479 (Closed): Project/ Program Unarchive is not working.: User Admin
09:47 AM Bug #15479: Project/ Program Unarchive is not working.: Issue fixed in Cy-7 malini C
09:52 AM Bug #15406: TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP: Need to discuss with Madhu User Admin
09:51 AM Bug #15406 (TBD): TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP: User Admin
09:51 AM Bug #15406 (Open): TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP: User Admin

01/31/2020

05:27 PM Bug #15523 (Reopen): ITAR document is going to NON ITAR Approver. PFB the scenario: 1.After publishing the doc pro , In Doc management the Approval route displays Module auto approval but it still foll... Ragavi Ram
04:55 PM Bug #15625 (Closed): Sporadic issue:data could not save alert on clicking save button in supplier contact page: Closing this defect as it is sporadic issue Saradha Balan
04:49 PM Bug #15608 (Closed): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even: Part tree page load - 40 sec
Expanding the tree to show complete part details - 3m 12 sec
Hence closing this issue Saradha Balan
01:20 PM Bug #15608 (Resolved): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even: Nikhil d
04:43 PM Bug #15520 (Closed): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description ): Anonymous
04:43 PM Bug #15617 (Closed): VOC: When doing only function flow-down in VOC, it displays wrong indicator: Anonymous
04:43 PM Bug #15618 (Closed): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.: Anonymous
04:43 PM Bug #15619 (Closed): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.: Anonymous
04:32 PM Bug #15631 (Closed): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings: Ragavi Ram
11:35 AM Bug #15631 (Resolved): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings: Jacqueline Antonette
10:36 AM Bug #15631 (Open): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings: User Admin
04:32 PM Bug #15616 (Closed): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup: Ragavi Ram
10:14 AM Bug #15616 (Resolved): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup: Jacqueline Antonette
03:18 PM Bug #15585 (TBD): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU: Smitha V
03:17 PM Bug #15585 (Open): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU: Smitha V
02:05 PM Bug #15635 (Closed): New cummins vam report-alert for part number is missing: Working fine in cy8 Saradha Balan
01:20 PM Bug #15635 (Resolved): New cummins vam report-alert for part number is missing: Nikhil d
10:36 AM Bug #15635 (Open): New cummins vam report-alert for part number is missing: User Admin
02:05 PM Bug #15634 (Closed): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type): Working fine in cy8 Saradha Balan
01:20 PM Bug #15634 (Resolved): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type): Nikhil d
10:36 AM Bug #15634 (Open): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type): User Admin
02:04 PM Bug #15636 (Closed): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts: Working fine in cy8 Saradha Balan
01:20 PM Bug #15636 (Resolved): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts: Nikhil d
10:36 AM Bug #15636 (Open): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts: User Admin
01:18 PM Bug #15632 (Closed): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving: not an issue Saradha Balan
01:18 PM Bug #15632 (Fixed with Hotfix): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving: Saradha Balan
10:36 AM Bug #15632 (Open): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving: User Admin
01:16 PM Bug #15640 (Closed): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot: Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue3.Refer screen shot Saradha Balan
01:15 PM Bug #15639 (Closed): Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not showing properly: Sporadic Issue:Exceptional scenario:VEM audit-no part name display in perform audit screen,so legend for vem also not... Saradha Balan
12:05 PM Bug #15613 (Closed): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.: Shankar Narayanan
10:36 AM Bug #15633 (Open): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen: User Admin
10:36 AM Bug #15630 (Open): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.: User Admin

01/30/2020

06:13 PM Bug #15623 (Closed): In Concerns part selection pop up, search option is not working.: Rupa K
06:07 PM Bug #15623 (Resolved): In Concerns part selection pop up, search option is not working.: Not Replicated Checked with QA Radha Krishnan S
06:05 PM Bug #15636 (Closed): Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed for the parts: Multi Site-Legend status is displaying wrong for multi site.PPAP status shows green though registration not completed... Saradha Balan
05:59 PM Bug #15621 (Closed): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite: Working fine in c7 Saradha Balan
05:52 PM Bug #15550 (Closed): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights): Working fine in c7 Saradha Balan
05:51 PM Bug #15610 (Closed): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also: Working fine in c7 Saradha Balan
05:51 PM Bug #15612 (Closed): Social Media-VAM audit is listing in supplier contact social media page: Working fine in c7 Saradha Balan
05:51 PM Bug #15537 (Closed): Email is not generated as expected in http://192.168.100.47/EwQIMS_Inst4 - Throwing " Failure in sending EMail" alert: Verified in Cy-7 build and closed Anonymous
05:51 PM Bug #15628 (Closed): No email for scheduling VAM audit: Working fine in c7 Saradha Balan
05:51 PM Bug #15526 (Closed): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again: Working fine in c7 Saradha Balan
11:29 AM Bug #15526 (Fixed with Hotfix): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again: verified as hot fix and working gine Saradha Balan
05:50 PM Bug #15607 (Closed): Risk Master-Deleted entity from suite listing in riskmaster menu: Working fine in c7 Saradha Balan
05:50 PM Bug #15595 (Closed): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a: working fine.issue has part number field is missing raised as new issue in cy7 Saradha Balan
05:48 PM Bug #15635 (Closed): New cummins vam report-alert for part number is missing: New cummins vam report-alert for part number is missing Saradha Balan
05:47 PM Bug #15634 (Closed): Server error-Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it imported by default with supplier type): Unable to add parts for the created supplier which is not having supplier type(not for imported supplier as it import... Saradha Balan
05:45 PM Bug #15633 (Closed): Number of Supplier contact displaying mismatch in Address and supplier contact listing screen: Number of Supplier contact displaying mismatch in Address and supplier contact listing screen Saradha Balan
05:43 PM Bug #15632 (Closed): Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving: Unable to specify Reporting Sub Business Unit in supplier creation page.Data not saving Saradha Balan
05:40 PM Bug #15241 (Reopen): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist: Issue reproducible in cy6 hence reopening the issue from cy1 Saradha Balan
05:36 PM Bug #15631 (Closed): Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings: Generate doc url is listed in context menu for NON ITAR documents even if its not enabled in doc pro settings Anonymous
05:30 PM Bug #15627 (Resolved): Auditor Utilization -> Utilization type is not working as expected: Anonymous
05:28 PM Bug #15627 (Not Resolved): Auditor Utilization -> Utilization type is not working as expected: Anonymous
11:20 AM Bug #15627 (Resolved): Auditor Utilization -> Utilization type is not working as expected: Anonymous
11:20 AM Bug #15627 (Open): Auditor Utilization -> Utilization type is not working as expected: Nikhil d
04:48 PM Bug #15606 (Closed): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method: Anonymous
09:52 AM Bug #15606 (Fixed with Hotfix): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method: Anonymous
04:32 PM Bug #15630 (Closed): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.: New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to repli... Ragavi Ram
03:29 PM Bug #15601 (Closed): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .: Ragavi Ram
03:29 PM Bug #15601 (Fixed with Hotfix): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .: Ragavi Ram
03:25 PM Bug #15616 (Not Resolved): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup: Anonymous
03:00 PM Bug #15622 (Closed): Holiday List creating with Special character in Additional holidays Specification displays Error: Verified in CY-7 Build and Closed Anonymous
12:49 AM Bug #15622 (Resolved): Holiday List creating with Special character in Additional holidays Specification displays Error: Raghu Ram
02:53 PM Bug #15620 (Closed): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document: Ragavi Ram
02:48 PM Bug #15605 (Closed): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder: Ragavi Ram
02:45 PM Bug #15604 (Closed): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.: Rupa K
12:49 AM Bug #15604 (Resolved): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.: Raghu Ram
12:13 PM Bug #15618 (Fixed with Hotfix): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.: Anonymous
11:20 AM Bug #15626 (Resolved): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized": Anonymous
11:20 AM Bug #15626 (Open): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized": Nikhil d

01/29/2020

10:33 PM Bug #15451 (Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection: Anonymous
02:57 PM Bug #15451 (Not Resolved): Report -> Audit Schedule Adherence & Auditor Utilization -> The report is not showing the data based on month and week selection: Scenario #1 Time period: Weekly or monthly : There is some data available. But system is showing no data available. Raja S
10:33 PM Bug #15429 (Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.: Anonymous
04:21 PM Bug #15429 (Not Resolved): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.: Raja S
09:57 PM Bug #15605 (Resolved): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder: Jacqueline Antonette
04:02 PM Bug #15605 (Open): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder: User Admin
09:56 PM Bug #15616 (Resolved): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup: Jacqueline Antonette
04:02 PM Bug #15616 (Open): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup: User Admin
12:48 PM Bug #15616 (Closed): Multi site: When activate the child folder which has ITAR enabled route in other site, then it shows duplicated in folder management and document management for both the sites. Also in select level popup: Multi site: When activate the folder in other site, shows double in folder management and document management Anonymous
09:36 PM Bug #15620 (Resolved): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document: Jacqueline Antonette
04:02 PM Bug #15620 (Open): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document: User Admin
01:12 PM Bug #15620 (Closed): IMPACT: Document Info link: Doc URL is not displayed for NON ITAR document: Document Info link: Doc URL is not displayed for NON ITAR document Anonymous
08:08 PM Bug #15520 (Resolved): Failure Tree and EFC Tree: Flowdown/FlowUp is not working as expected(Refer Description ): Anonymous
07:15 PM Bug #15619 (Resolved): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.: Anonymous
04:02 PM Bug #15619 (Open): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.: User Admin
12:57 PM Bug #15619 (Closed): Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.: Failure Tree: Publish Document is not proper comparing to Requirement/EFC tree.
Refer Screenshot Anonymous
07:02 PM Bug #15550 (Resolved): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights): Prabhu P
02:09 PM Bug #15550 (Not Fixed with Hotfix): Access Rights:Remove the "view project" option in Audit Administrator(Access Rights): verified that still view projects rights is showing.refer screen shot Saradha Balan
07:02 PM Bug #15625 (Resolved): Sporadic issue:data could not save alert on clicking save button in supplier contact page: Prabhu P
04:02 PM Bug #15625 (Open): Sporadic issue:data could not save alert on clicking save button in supplier contact page: User Admin
03:48 PM Bug #15625 (Closed): Sporadic issue:data could not save alert on clicking save button in supplier contact page: Sporadic issue:data could not save alert on clicking save button in supplier contact page Saradha Balan
07:02 PM Bug #15610 (Resolved): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also: Prabhu P
04:02 PM Bug #15610 (Open): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also: User Admin
07:01 PM Bug #15526 (Resolved): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again: Prabhu P
03:47 PM Bug #15526 (Not Resolved): when second time importing the supplier sheet ,the SQI/SQE details for the existing imported supplier is missed,need to specify again: unable to verify this issue as not able to import the same sheet (SQE,SQM alone specified) second time ,page keep on ... Saradha Balan
06:19 PM Bug #15628 (Resolved): No email for scheduling VAM audit: Nikhil d
06:19 PM Bug #15628 (Open): No email for scheduling VAM audit: Nikhil d
05:20 PM Bug #15628 (Closed): No email for scheduling VAM audit: No email for scheduling VAM audit Saradha Balan
06:12 PM Bug #15418 (Closed): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data: Raja S
04:12 PM Bug #15418 (Not Resolved): Report -> Audit Schedule Adherence -> The graph is not showing the deadline violated data and on time completed data: Raja S
05:55 PM Bug #15479: Project/ Program Unarchive is not working.: Issue Closed and Verified Anonymous
05:48 PM Bug #15613 (Fixed with Hotfix): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.: Shankar Narayanan
03:55 PM Bug #15613 (Resolved): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.: Reng Raj
03:55 PM Bug #15613 (Open): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.: Reng Raj
11:39 AM Bug #15613 (Closed): Design VDA - Functional/Failure Analysis - After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also.: After doing Skip level Flowdown, System displays Placeholder branch for the Parent element also Shankar Narayanan
05:39 PM Bug #15617 (Resolved): VOC: When doing only function flow-down in VOC, it displays wrong indicator: Anonymous
03:02 PM Bug #15617 (Open): VOC: When doing only function flow-down in VOC, it displays wrong indicator: Anonymous
12:49 PM Bug #15617 (Closed): VOC: When doing only function flow-down in VOC, it displays wrong indicator: VOC: When doing only function flow-down in VOC, it displays red indicator instead of Yellow color
Refer Screenshot Anonymous
05:26 PM Bug #15607 (Fixed with Hotfix): Risk Master-Deleted entity from suite listing in riskmaster menu: Verified as hot fix and working fine in cy6 Saradha Balan
04:22 PM Bug #15607 (Resolved): Risk Master-Deleted entity from suite listing in riskmaster menu: Prabhu P
04:02 PM Bug #15607 (Open): Risk Master-Deleted entity from suite listing in riskmaster menu: User Admin
05:24 PM Bug #15595 (Fixed with Hotfix): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a: Verified as hot fix and working fine in cy6 Saradha Balan
03:30 PM Bug #15595 (Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a: Nikhil d
01:54 PM Bug #15595 (Not Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a: Verified that ISO/TS REG field has no alert,
standard on approval and signed packaging agreement has same alert... Saradha Balan
05:19 PM Bug #15390 (Resolved): Report -> Audit Repeat NC -> Various finding status is missing: Anonymous
04:21 PM Bug #15390 (Not Resolved): Report -> Audit Repeat NC -> Various finding status is missing: Raja S
05:01 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process: As discussed with Sabu, we can educate customer to set route Anonymous
04:58 PM Bug #15547 (Closed): Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process: Smitha V
04:41 PM Bug #15547: Publish from Aqua: When publishing the ITAR document to the folder which doesnt have ITAR route set, then its showing error. When it published in the Aqua pro module level folder, its allowing to publish the document without any approval process: Now its not showing error, but the document gets published Anonymous
04:27 PM Bug #15627 (Closed): Auditor Utilization -> Utilization type is not working as expected: Auditor Utilization -> Utilization type is not working as expected . the report showing only specific datas. 2019 and... Raja S
04:26 PM Bug #15626 (Closed): Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized": Auditor Utilization -> Error message displayed when try to view the report by using only "Not Utilized" Raja S
04:24 PM Bug #15420 (Closed): Report - Auditor Utilization -> Type -> Utilized and Not Utilized data's are same: Raja S
04:22 PM Bug #15621 (Resolved): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite: Prabhu P
04:02 PM Bug #15621 (Open): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite: User Admin
02:30 PM Bug #15621 (Closed): Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite: Multi site-Risk level set for corporate also showing for other sites.also it is listing all the sites created in Suite Saradha Balan
04:21 PM Bug #15436 (Closed): Report -> Repeat NC->Error message displayed if user search with an entity and site which is having multiple business units Ex: Refer Entity : 01 PSBU-Phaltan High Horsepower Plant (PHP): Raja S
04:11 PM Bug #15464 (Closed): Report -> Repeat NC-> Repeated NC Count is not getting displayed if same Non Conformity is repeated for two different audits: Raja S
04:02 PM Bug #15623 (Open): In Concerns part selection pop up, search option is not working.: User Admin
02:59 PM Bug #15623 (Closed): In Concerns part selection pop up, search option is not working.: In Concerns part selection pop up, search option is not working. After selecting in manually the failure modes are no... Rupa K
04:02 PM Bug #15622 (Open): Holiday List creating with Special character in Additional holidays Specification displays Error: User Admin
02:50 PM Bug #15622 (Closed): Holiday List creating with Special character in Additional holidays Specification displays Error: Holiday List creating with Special character in Additional holidays Specification displays Error Anonymous
04:02 PM Bug #15608 (Open): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even: User Admin
04:02 PM Bug #15604 (Open): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.: User Admin
04:02 PM Bug #15603 (Open): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.: User Admin
04:02 PM Bug #15601 (Open): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .: User Admin
03:56 PM Bug #15618 (Resolved): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.: Anonymous
03:55 PM Bug #15618 (Open): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.: Anonymous
12:52 PM Bug #15618 (Closed): Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.: Failure Tree: when clicking on Toggle fullscreen, double scroll is displayed in diagram.
Refer Screenshot Anonymous
03:52 PM Bug #15433 (Closed): Risk level-> Risk is displayed incorrect.it should show the corporate risk level: verified and working fine Saradha Balan
03:29 PM Bug #15406: TBD:When the Risk value is set as Not qualified then it is allowing to schedule the audit and PPAP: Need to discuss with Sabu and Bijoy Saradha Balan
03:29 PM Bug #15585: TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU: Need to discuss with Sabu and Bijoy Saradha Balan
03:11 PM Bug #15544 (Closed): When the SAM & SEM is unchecked and registration is not completed then the supplier assessment is showing as InProgress.: verified and working fine in cy6 Saradha Balan
02:59 PM Bug #15446 (Closed): BOM Import -- Change the SupplierType - "Supplier Type" in the Import excel: verified and working fine in cy6 Saradha Balan
02:58 PM Bug #15265 (Closed): The options under Supplier Evaluation need to be updated to SAM and SEM Instead of VAM/ VEM: verified and working fine in cy6 Saradha Balan
02:53 PM Bug #15423 (Closed): Report -> Auditor Utilization -> The gap between (Entity vs No of Hours) and (Program Vs. No of Hours) has to remove: Raja S
02:52 PM Bug #15562 (Closed): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized": Raja S
02:51 PM Bug #15538 (Closed): Email validation is not done during Supplier creation: [email protected] Saradha Balan
02:51 PM Bug #15551 (Closed): Need commodity,system and Subsystem field to be listed in the part details screen.: verified and working fine in cy6 Saradha Balan
02:50 PM Bug #15552 (Closed): On mouse hovering the production item, parent name is showing as "null".: verified and working fine in cy6 Saradha Balan
02:45 PM Bug #15405 (Closed): Commodity screen : Need to change the label as "System" Instead of PartSystem and Increase the dropdown size: Verified and working fine in cy6 Saradha Balan
02:43 PM Bug #15602 (Not Resolved): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments): In All the widgets Close icon is missing and in My dashboard expand and collapse option is not working. Rupa K
02:32 PM Bug #15447 (Closed): Supplier-> New supplier-> View log-> Login as new user it has show the only the current history status not previous history some other user (supplier): verified that restrict with an alert 'no data found' Saradha Balan
02:29 PM Bug #15272 (Closed): While Changing the Process from In Active to Active or From Active to In Active Displays alert as "Duplicate process": Issue verified in SP_925 CY-6 and Closed Anonymous
02:25 PM Bug #15612 (Resolved): Social Media-VAM audit is listing in supplier contact social media page: Nikhil d
02:24 PM Bug #15612 (Open): Social Media-VAM audit is listing in supplier contact social media page: Nikhil d
02:22 PM Bug #15252 (Closed): Non ITAR users are listing while providing Access to Suite,Site and Module: Verified in SP_925 Cy-6 and Closed Anonymous
02:20 PM Bug #15277 (Closed): While Changing From Non ITAR instance to ITAR Instance system does not display Valid validation: Issue verified in SP_925 Cy-6 and Closed Anonymous
02:10 PM Bug #15459 (Closed): Effectiveness -> When Verified is no, below validation and effectiveness should be disable: verified and working fine in cy6 Saradha Balan
02:10 PM Bug #15534 (Closed): Multi site: Supplier is not listing.Showstopper for multi site.: verified and working fine in cy6 Saradha Balan
02:08 PM Bug #15536 (Closed): Multi site: Risk level is not able to set because popup is missing: verified and working fine in cy6 Saradha Balan
02:07 PM Bug #15548 (Closed): Multi Site-Parts summary details from Corporate site displaying in multi site(Omnex chennai).Pls find screen shot: verified and working fine in cy6 Saradha Balan
02:01 PM Bug #15587 (Closed): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.: verified and working fine Saradha Balan
01:55 PM Bug #15593 (Closed): Copying any value in new cummins report it takes some space in front: Verified as per dev comments and working fine Saradha Balan
01:54 PM Bug #15611 (Closed): IE Browser-VEM-Unable to publish VEM report(submit to auditee): Verified and working fine Saradha Balan
01:33 PM Bug #15606 (Resolved): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method: Fixed and patches provided for testing Iyappan hariharan
01:26 PM Bug #15606 (Open): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method: User Admin
12:56 PM Bug #15586 (Closed): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights: Verified and working fine in cy6 Saradha Balan
12:55 PM Bug #15598 (Closed): Report --> gage due report is not showing in the report tab: Kiruthika G
12:18 PM Bug #15511 (Closed): Batch Download: When the ITAR document is downloaded by ITAR user, then the NON ITAR module admin can view the ITAR documents in downloadable form. Same for stitch document: Ragavi Ram
10:48 AM Bug #15566 (Closed): Created a Escalation Route with special character given in the description field. in the listing it is showing as route name , description and site value incorrectly. Not able to open the route also for editing.: Issue verified in SP_925 CY-6 and Closed Anonymous
10:36 AM Bug #15579 (Closed): Suite : Supplier is not getting created even after filling all the mandatory fields.: Verified in Sp_925 Cy-6 Build and Closed Anonymous
09:59 AM Bug #15579 (Resolved): Suite : Supplier is not getting created even after filling all the mandatory fields.: User Admin

01/28/2020

07:52 PM Bug #15593 (Resolved): Copying any value in new cummins report it takes some space in front: Before Copying Anything. First Copy in notepad and Verify any space are there or not. If manually entered value doesn... Nikhil d
06:37 PM Bug #15593 (Not Fixed with Hotfix): Copying any value in new cummins report it takes some space in front: Issue reproduciable in IE.find screen shot Saradha Balan
07:50 PM Bug #15611 (Resolved): IE Browser-VEM-Unable to publish VEM report(submit to auditee): Nikhil d
07:48 PM Bug #15611 (Open): IE Browser-VEM-Unable to publish VEM report(submit to auditee): Can able replicate in IE. And the Same issue was reported in Comments of Bug #15595 Nikhil d
06:47 PM Bug #15611 (Closed): IE Browser-VEM-Unable to publish VEM report(submit to auditee): IE Browser-VEM-Unable to publish VEM report(submit to auditee) Saradha Balan
07:50 PM Bug #15595 (Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a: Cannot Able to Replicate. -> Done With Few Fields
few fields not specified then report-> Kindly Mention in Screen ... Nikhil d
06:37 PM Bug #15595 (Not Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a: Veriried issue as New cummins report-few fields not specified then report is unable to submit in IE browser Saradha Balan
06:57 PM Bug #15443 (Closed): Report Issues : Please refer the description: Anonymous
06:55 PM Bug #15443 (Resolved): Report Issues : Please refer the description: Anonymous
06:57 PM Bug #15558 (Closed): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection: Anonymous
06:55 PM Bug #15558 (Resolved): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection: Anonymous
06:51 PM Bug #15599 (Closed): Multi-Site : Created departments are not listing in Operator menu: Anonymous
06:51 PM Bug #15600 (Closed): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working: Anonymous
06:50 PM Bug #15612 (Closed): Social Media-VAM audit is listing in supplier contact social media page: Social Media-VAM audit is listing in supplier contact social media page Saradha Balan
06:47 PM Bug #15610 (Closed): Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scroll bar showing in RHS calender also: Chrome-VEM-Unable to schedule VEM audit, as Schedule audit button not displaying(design issue) engagement page,no scr... Saradha Balan
06:44 PM Bug #15608 (Closed): Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the parts even: Supplier page-Add part tree screen->Part tree loading to expand takes more time (more than 5mins)and not showing the ... Saradha Balan
06:43 PM Bug #15607 (Closed): Risk Master-Deleted entity from suite listing in riskmaster menu: Risk Master-Deleted entity from suite listing in riskmaster menu Saradha Balan
06:42 PM Bug #15589 (Closed): Unable to add parts selected from part tree loaded as 'system': Verified and working fine in cy6 Saradha Balan
06:42 PM Bug #15594 (Closed): Label issue in new cummins report for THLcolor code: Verified and working fine in cy6 Saradha Balan
06:42 PM Bug #15493 (Closed): Legend status not showing in https site: Verified and working fine in cy6 Saradha Balan
06:41 PM Bug #15525 (Closed): Add Part->Part tree loaded by commodity-> parts not getting added under supplier part detail section: Verified and working fine in cy6 Saradha Balan
06:41 PM Bug #15529 (Closed): New Cummins VAM report->Label in the attached form is incomplete,Need to left align all the headings with increased font: Verified and working fine in cy6 Saradha Balan
06:41 PM Bug #15531 (Closed): New Cummins VAM Report->No date picker for "Do you want to repeat audit"? option: Verified and working fine in cy6 Saradha Balan
06:40 PM Bug #15542 (Closed): New Cummins VAM Report->Audit Status->New report is not displayed in audit status .pls find screen shot: Verified and working fine in cy6 Saradha Balan
06:40 PM Bug #15571 (Closed): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment: Verified and working fine in cy6 Saradha Balan
06:39 PM Bug #15574 (Closed): Score settings-if score specified as >0 or <0 '0' is not getting displayed in score main page.pls refer screen shot: Verified and working fine in cy6 Saradha Balan
06:39 PM Bug #15588 (Closed): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity: Verified and working fine in cy6 Saradha Balan
06:38 PM Bug #15592 (Closed): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down: Verified and working fine in cy6 Saradha Balan
06:36 PM Bug #15596 (Closed): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page: Verified and working fine in CY6 Saradha Balan
06:28 PM Bug #15354 (Closed): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message: Kiruthika G
06:27 PM Bug #15540 (Closed): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details: Kiruthika G
06:00 PM Bug #15606 (Closed): Main: Non-ITAR User can able to access the ITAR PI Documents by indirect method: In the Main Menu, Non-ITAR Users can able to access the ITAR PI Documents, When the Non-ITAR User directly click the ... Anonymous
05:41 PM Bug #15597 (Closed): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator: Kiruthika G
05:03 PM Bug #15605 (Closed): New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select position based user even there is no position based route set for the folder: New document request:Cant able to request a document in the below mentioned scenario. Asking the user to select posit... Anonymous
04:51 PM Bug #15394 (Closed): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message: Closed in SP925 Cycle 6 Shankar Narayanan
03:52 PM Bug #15604 (Closed): In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory from Suite user cant able to create suppliers.: In Supplier page, Template, and Risk level needs to set as Optional Field. Because of this fields being as mandatory ... Rupa K
03:41 PM Bug #15602 (Resolved): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments): Reng Raj
03:40 PM Bug #15602 (Open): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments): Reng Raj
03:38 PM Bug #15580 (Closed): Suite : When Assigning module access for the first time the Drop down is not displaying fully: Verified in Cy-6 Build and closed Anonymous
03:36 PM Bug #15580 (Resolved): Suite : When Assigning module access for the first time the Drop down is not displaying fully: Raghu Ram
03:34 PM Bug #15409 (Closed): About EWQIMS is not displaying Fully when clicked.: Verified in Cy-6 build and closed Anonymous
03:30 PM Bug #15603 (Closed): Social Media: On viewing document and closing the popup screen the screen getting collapsed. Not able to proceed further by clicking the reports icons.: Social Media: On viewing document and closing the popup screen the screen getting collapsed.
Note : On closing an... Ragavi Ram

01/27/2020

09:01 PM Bug #15562 (Resolved): Report -> Auditor Utilization -> The report is not displaying the data when try to view with the "Type-Utilized / Not Utilized": Anonymous
09:01 PM Bug #15420 (Resolved): Report - Auditor Utilization -> Type -> Utilized and Not Utilized data's are same: Anonymous
08:18 PM Bug #15558 (Not Fixed with Hotfix): Supplier corrective Action Report : Need to show data only for Receiving Inspection. Currently displaying data for all types of Inspection: Anonymous
08:01 PM Bug #15600 (Fixed with Hotfix): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working: Anonymous
05:52 PM Bug #15600 (Resolved): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working: Anonymous
11:20 AM Bug #15600 (Open): Charts Issues : UCL and LCL values are wrongly displayed in Run charts.Radio buttons for selecting / deselecting charts are not working: User Admin
07:53 PM Bug #15585 (Resolved): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU: 1.Need to add reporting subbusinessunit-not completed
2.Need to add multiple BU,SBU,RBU,RSBU- Completed Prabhu P
11:20 AM Bug #15585 (Open): TBD:Gaps in Cummins New import format 1.Need to add Reporting SubBusiness unit,2.Need to add multiple BU,SBU,RBU,RSBU: User Admin
06:36 PM Bug #15356 (Yet to Verify): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.: Need to verify in new build Anonymous
06:36 PM Bug #15583 (Closed): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment: Attachment only displayed in View report Anonymous
03:52 PM Bug #15583 (Resolved): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment: Nikhil d
11:20 AM Bug #15583 (Open): "Manufacturing Audit report template" while publishing audit report is not displaying Audit attachments properly with proper allignment: User Admin
06:27 PM Bug #15582 (Closed): Re upload Extension request is not working: Verified in cycle 5 Anonymous
12:55 PM Bug #15582 (Resolved): Re upload Extension request is not working: Anonymous
11:20 AM Bug #15582 (Open): Re upload Extension request is not working: User Admin
06:22 PM Bug #15540 (Resolved): Equipment(Import): Equipment Import--> Not able to import the Utility Equipment details: Anonymous
06:14 PM Bug #15599 (Fixed with Hotfix): Multi-Site : Created departments are not listing in Operator menu: Anonymous
05:53 PM Bug #15599 (Resolved): Multi-Site : Created departments are not listing in Operator menu: Anonymous
12:23 PM Bug #15599 (In Progress): Multi-Site : Created departments are not listing in Operator menu: Anonymous
11:20 AM Bug #15599 (Open): Multi-Site : Created departments are not listing in Operator menu: User Admin
06:03 PM Bug #15569 (Closed): Tooptip should be proper while hovering he icon: Anonymous
06:03 PM Bug #15569: Tooptip should be proper while hovering he icon: verified in cycle 4 Anonymous
02:18 PM Bug #15569 (Resolved): Tooptip should be proper while hovering he icon: Prabhu P
05:59 PM Bug #15342 (Closed): Uppercase and lower case should be proper throughout site: Verified Anonymous
05:53 PM Bug #15391 (Closed): Checklist -> Blank DB-> Before Import -> Multiple checklist is displayed while clicking the (+) icon: Verified in cycle5 Anonymous
05:53 PM Bug #15468 (Closed): Audit Program -> Server error displayed when clicking on "delete" button: Anonymous
05:52 PM Bug #15468: Audit Program -> Server error displayed when clicking on "delete" button: Verified in cycle 5 Anonymous
05:24 PM Bug #15598 (Fixed with Hotfix): Report --> gage due report is not showing in the report tab: Kiruthika G
03:23 PM Bug #15598 (Resolved): Report --> gage due report is not showing in the report tab: Prabhu P
11:20 AM Bug #15598 (Open): Report --> gage due report is not showing in the report tab: User Admin
05:05 PM Bug #15586 (Resolved): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights: Prabhu P
11:20 AM Bug #15586 (Open): Unable to import/add Supplier&Parts with new format from Suite if user doesnt have supplier portal module rights: User Admin
04:44 PM Bug #15587 (Resolved): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.: Prabhu P
11:20 AM Bug #15587 (Open): Part master-Parts created in AQUA after syncing in part master screen,part name is not showing.: User Admin
04:18 PM Bug #15354 (Resolved): Unit of Measurement: When a user tries to edit the imported UOM, it displays the error message: Anonymous
03:20 PM Bug #15501 (Closed): Report--> Gage study due report only need to display for husco.: Kiruthika G
03:20 PM Bug #15501 (Fixed with Hotfix): Report--> Gage study due report only need to display for husco.: Need to display in main stream - Baskar comment Kiruthika G
03:17 PM Bug #15581 (Resolved): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message: Reng Raj
11:20 AM Bug #15581 (Open): Multi language: Social media--> When tries to change the language from logged in (language preference) details, it showing error message: User Admin
02:49 PM Bug #15592 (Resolved): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down: Need to verify after Hotfix Nikhil d
11:20 AM Bug #15592 (Open): SAM unchecked parts listing in schedule audit page as audit not started status as well as in part listing drop down: User Admin
02:48 PM Bug #15594 (Resolved): Label issue in new cummins report for THLcolor code: Need to verify after Hotfix Nikhil d
11:20 AM Bug #15594 (Open): Label issue in new cummins report for THLcolor code: User Admin
02:48 PM Bug #15595 (Resolved): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a: Need to verify after Hotfix Nikhil d
11:20 AM Bug #15595 (Open): New cummins report-few fields not specified then report is unable to submit and no mandatory alert to specify also Issue2:though suppler agreement data specified,while publish it keep on asking to enter those failed rather check with other not specified a: User Admin
02:48 PM Bug #15571 (Resolved): New Cummins Report-Export to PDF-Issue1:In PDF details is not displaying in proper. Issue 2: Score details not showing in pdf reportpls find attachment: Nikhil d
02:31 PM Bug #15590 (Closed): Subsystem option is not listing in Part tree loaded by in add part screen: As per Dev comments closing this defect Saradha Balan
01:18 PM Bug #15590 (Resolved): Subsystem option is not listing in Part tree loaded by in add part screen: Prabhu P
01:18 PM Bug #15590: Subsystem option is not listing in Part tree loaded by in add part screen: as per sabu discussion not need for subsystem Prabhu P
11:20 AM Bug #15590 (Open): Subsystem option is not listing in Part tree loaded by in add part screen: User Admin
02:30 PM Bug #15493 (Fixed with Hotfix): Legend status not showing in https site: Working fine.Verified as hot fix Saradha Balan
02:21 PM Bug #15593 (Fixed with Hotfix): Copying any value in new cummins report it takes some space in front: Working fine.Verified as hot fix Saradha Balan
02:18 PM Bug #15596 (Fixed with Hotfix): Unable to assign audit form(checklists) for VEM audit as no checklists has displayed in assign audit form page: Working fine.Verified as hot fix Saradha Balan
02:17 PM Bug #15589 (Resolved): Unable to add parts selected from part tree loaded as 'system': Prabhu P
11:20 AM Bug #15589 (Open): Unable to add parts selected from part tree loaded as 'system': User Admin
02:17 PM Bug #15588 (Resolved): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity: its not an issue.its a commodity Prabhu P
11:20 AM Bug #15588 (Open): Add Parts->If commodity alone selected then in part details section in supplier screen,commodity filed is empty not showing as commodity: User Admin
12:44 PM Bug #15602 (Closed): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing in all the widgets. (View attachments): In Social Media layout, for all the widgets user cant able to expand or collapse the widgets. Close icon is missing i... Rupa K
12:29 PM Bug #15597 (Resolved): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator: Anonymous
11:20 AM Bug #15597 (Open): Production OEE: When creating the 5 different part with description and selecting two for parts production in production OEE screen, it shows the Losses entry for different part which is not selected by operator: User Admin
12:10 PM Bug #15394 (Resolved): Process VDA - Functional/Failure Analysis - JS error is displayed while clicking OK button for Exclude Characteristics alert message: Anonymous
11:45 AM Bug #15601 (Closed): Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the document the Documents gets auto publish and on viewing for the first time it throw Server error .: Route : Allowing to save the route without adding approvers. If the Route is set to ITAR level and publishing the doc... Ragavi Ram
11:20 AM Bug #15591 (Open): Sporadic issue:When application is idle for some time ->Session expired-checklists-assigned score in section not inherited for checklists 'parent has score' alert keep on displaying: User Admin
11:20 AM Bug #15580 (Open): Suite : When Assigning module access for the first time the Drop down is not displaying fully: User Admin
11:20 AM Bug #15579 (Open): Suite : Supplier is not getting created even after filling all the mandatory fields.: User Admin

Also available in: Atom