SP920

12/24/2019

03:12 PM Bug #15236 (Open): The Level Value under Supplier Risk Levels (Risk Master) is accepting only single digit number.

User Admin

03:12 PM Bug #15235 (Open): VAM Corrective action close out->While Changing from NC/OFI to some other score,the updated score details not listing.

User Admin

03:12 PM Bug #15234 (Open): Score details not displayed for color based (VDA) in view checklists and vam report checklists details.refer screen shot

User Admin

03:12 PM Bug #15233 (Open): Perform audit->Need maximize button to view in proper view checklists details screen

User Admin

12/10/2019

04:54 PM Bug #15236 (Open): The Level Value under Supplier Risk Levels (Risk Master) is accepting only single digit number.

The Level Value under Supplier Risk Levels (Risk Master) is accepting only single digit number.(not allowing to enter... malini C

02:33 PM Bug #15235 (Open): VAM Corrective action close out->While Changing from NC/OFI to some other score,the updated score details not listing.

VAM Corrective action close out->While Changing from NC/OFI to some other score,the updated score details not listing. Saradha Balan

02:16 PM Bug #15234 (Open): Score details not displayed for color based (VDA) in view checklists and vam report checklists details.refer screen shot

Score details not displayed for color based (VDA) in view checklists and vam report checklists details.refer screen shot Saradha Balan

02:07 PM Bug #15233 (Open): Perform audit->Need maximize button to view in proper view checklists details screen

Perform audit->Need maximize button to view in proper view checklists details screen Saradha Balan

12/09/2019

11:00 AM Bug #15203 (Resolved): Design VDA - Failure Analysis - De-allocated element is not removed in Failure Analysis (Refer Description)

Anonymous

11:00 AM Bug #15009 (Resolved): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA

Anonymous

12/06/2019

02:39 PM Bug #15009 (In Progress): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA

Anonymous

12:35 PM Suggestion #14986 (Resolved): Few changes needs to be done in Inspection sheet,please check description

Anonymous

12/05/2019

07:49 PM Bug #15056 (Closed): Equipment: Not able to delete the Utility Equipment

Kiruthika G

07:49 PM Bug #15184 (Closed): Die PM Calendar: When a die technician requested the spare part and then clicked on planned maintenance and then PM Calendar breadcrumb, it redirecting to the Equipment PM Calendar

Kiruthika G

07:42 PM Bug #15185 (Closed): Social Media: Planned Maintenance widgets extract pop up window-->Click on Die WO--> The Equipment name and code should be renamed to Die Name/Die Code

Kiruthika G

07:33 PM Bug #15103 (Closed): Batch Manager: The PM/BD/Die-->The reminder mail is getting generated in name of Escalation mail in batch manager job list

Kiruthika G

06:19 PM Bug #13272 (Closed): Emails are not generated from Corporate site. In wires and cables, mails are generating but it shows wrong persons in TO email. it should trigger email to the person based on the site rights

Anonymous

05:21 PM Bug #15200 (Closed): Through Auditee response and Auditor closeout date and time is available for One of the findings System displays as deadline violated.

Issue verified in SP_921 Anonymous

04:59 PM Bug #15190 (Closed): Target PPM : Search operation is not working for any columns

Anonymous

04:56 PM Suggestion #15167 (Closed): Label Changes : Refer description

Anonymous

04:56 PM Bug #14953 (Closed): Inspection form Standard : Attached files are not displaying after clicking on save

Anonymous

02:27 PM Bug #15196 (Closed): DFMEA: When New PI is created in FST, by default it is creating an Technical Safety Requirement Group in DFMEA (Refer Description)

Anonymous

02:27 PM Bug #15162 (Closed): Bill of Material Should be Renamed as Item element in following places

Anonymous

01:11 PM Bug #15009 (Not Resolved): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA

Issue faced in Process VDA. Shankar Narayanan

12/04/2019

08:24 PM Bug #15196 (Resolved): DFMEA: When New PI is created in FST, by default it is creating an Technical Safety Requirement Group in DFMEA (Refer Description)

Anonymous

05:47 PM Bug #15196 (In Progress): DFMEA: When New PI is created in FST, by default it is creating an Technical Safety Requirement Group in DFMEA (Refer Description)

User Admin

02:50 PM Bug #15196 (Not Resolved): DFMEA: When New PI is created in FST, by default it is creating an Technical Safety Requirement Group in DFMEA (Refer Description)

Anonymous

01:23 PM Bug #15196 (Resolved): DFMEA: When New PI is created in FST, by default it is creating an Technical Safety Requirement Group in DFMEA (Refer Description)

User Admin

08:23 PM Bug #15162 (Resolved): Bill of Material Should be Renamed as Item element in following places

Anonymous

06:04 PM Bug #15162 (In Progress): Bill of Material Should be Renamed as Item element in following places

Anonymous

04:52 PM Bug #15162 (Not Resolved): Bill of Material Should be Renamed as Item element in following places

Anonymous

12:58 PM Bug #15162 (Resolved): Bill of Material Should be Renamed as Item element in following places

Smitha V

08:04 PM Suggestion #15167 (Resolved): Label Changes : Refer description

Anonymous

08:04 PM Bug #14953 (Resolved): Inspection form Standard : Attached files are not displaying after clicking on save

Anonymous

02:36 PM Bug #14953 (Not Resolved): Inspection form Standard : Attached files are not displaying after clicking on save

Attach from docpro not working Anonymous

08:01 PM Bug #15190 (Resolved): Target PPM : Search operation is not working for any columns

Anonymous

02:39 PM Bug #15190 (Not Resolved): Target PPM : Search operation is not working for any columns

Now only Search by Customer/Supplier is working Anonymous

07:08 PM Bug #15023 (Closed): Inprocess Inspection : Data not displaying correctly in Inspection sheet on applying Responsible party filter

Anonymous

07:00 PM Bug #15119 (Closed): Social Media Widgets : Report and Report name displaying is wrong

Anonymous

12:58 PM Bug #15119 (Resolved): Social Media Widgets : Report and Report name displaying is wrong

Smitha V

06:34 PM Bug #15009 (Resolved): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA

Anonymous

04:33 PM Bug #15009 (Not Resolved): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA

Shankar Narayanan

06:18 PM Bug #15015 (Closed): Design and Process VDA - Result & Documentation - Filter option for High/Medium/Low Action Priority is not working

Shankar Narayanan

04:46 PM Bug #15015 (Not Resolved): Design and Process VDA - Result & Documentation - Filter option for High/Medium/Low Action Priority is not working

In Design VDA it is not working. Shankar Narayanan

12:58 PM Bug #15015 (Resolved): Design and Process VDA - Result & Documentation - Filter option for High/Medium/Low Action Priority is not working

Smitha V

06:17 PM Bug #15006 (Closed): Multi SIte: When the integrated document is from Aqua pro and when doing change request for that document, it shows a blank screen and the change request is not done

Ragavi Ram

12:58 PM Bug #15006 (Resolved): Multi SIte: When the integrated document is from Aqua pro and when doing change request for that document, it shows a blank screen and the change request is not done

Smitha V

06:00 PM Bug #15114 (Closed): Multi-site : Schedules created under production Inprocess is not listing in Inprocess Inspection menu

Anonymous

12:58 PM Bug #15114 (Resolved): Multi-site : Schedules created under production Inprocess is not listing in Inprocess Inspection menu

Smitha V

05:55 PM Bug #15203 (In Progress): Design VDA - Failure Analysis - De-allocated element is not removed in Failure Analysis (Refer Description)

Anonymous

05:46 PM Bug #15203: Design VDA - Failure Analysis - De-allocated element is not removed in Failure Analysis (Refer Description)

Refresh issue occurs in Functional Analysis Shankar Narayanan

03:05 PM Bug #15203 (Not Resolved): Design VDA - Failure Analysis - De-allocated element is not removed in Failure Analysis (Refer Description)

While De-allocating from Functional/Failure Analysis and again switching to Failure Analysis, Element is not displaye... Anonymous

05:25 PM Bug #15077 (Closed): Final Inspection : After saving a new schedule it is not listing in the schedule screen

Anonymous

12:58 PM Bug #15077 (Resolved): Final Inspection : After saving a new schedule it is not listing in the schedule screen

Smitha V

05:24 PM Bug #15200 (Resolved): Through Auditee response and Auditor closeout date and time is available for One of the findings System displays as deadline violated.

Nikhil d

03:26 PM Bug #15200 (Not Fixed with Hotfix): Through Auditee response and Auditor closeout date and time is available for One of the findings System displays as deadline violated.

Issue verified in SP_921 Anonymous

05:16 PM Bug #15198 (Closed): Auditee response form Hyperlinks on LHS are not displaying for all the forms

Issue verified in SP_921 Anonymous

03:49 PM Bug #15198 (Resolved): Auditee response form Hyperlinks on LHS are not displaying for all the forms

Radha Krishnan S

03:45 PM Bug #15198 (Open): Auditee response form Hyperlinks on LHS are not displaying for all the forms

User Admin

05:15 PM Bug #15199 (Closed): Auditee response form is taking Long time to Load the form

Issue verified in SP_921 Anonymous

03:49 PM Bug #15199 (Resolved): Auditee response form is taking Long time to Load the form

Radha Krishnan S

03:45 PM Bug #15199 (Open): Auditee response form is taking Long time to Load the form

User Admin

05:15 PM Bug #15201 (Closed): Thought Auditee response is completed system displays as auditee not yet responded and System allows to closeout the findings

Anonymous

03:33 PM Bug #15201 (Fixed with Hotfix): Thought Auditee response is completed system displays as auditee not yet responded and System allows to closeout the findings

Issue verified in SP_921 Anonymous

05:15 PM Bug #15181 (Closed): Audit calendar->After adding supplier or entity in field not able to remove by clicking on close

Anonymous

02:34 PM Bug #15181 (Fixed with Hotfix): Audit calendar->After adding supplier or entity in field not able to remove by clicking on close

Issue verified in SP921 Anonymous

12:58 PM Bug #15181 (Resolved): Audit calendar->After adding supplier or entity in field not able to remove by clicking on close

Smitha V

05:15 PM Bug #15175 (Closed): Corrective action closeout displays 404 error when clicked on View hyperlink of the attached document

Anonymous

03:34 PM Bug #15175 (Fixed with Hotfix): Corrective action closeout displays 404 error when clicked on View hyperlink of the attached document

Issue verified in SP_921 Anonymous

12:58 PM Bug #15175 (Resolved): Corrective action closeout displays 404 error when clicked on View hyperlink of the attached document

Smitha V

05:15 PM Bug #15147 (Closed): Suite : Under Widget preference->Widget configuration when double clicked on Grid displays blank

Anonymous

05:14 PM Bug #15147 (Fixed with Hotfix): Suite : Under Widget preference->Widget configuration when double clicked on Grid displays blank

Issue verified in SP_921 Anonymous

12:58 PM Bug #15147 (Resolved): Suite : Under Widget preference->Widget configuration when double clicked on Grid displays blank

Smitha V

05:15 PM Bug #15093 (Closed): Repeat NC email is generating Based on the frequency Set in Business rules

Anonymous

02:33 PM Bug #15093 (Fixed with Hotfix): Repeat NC email is generating Based on the frequency Set in Business rules

Issue verified in SP 921 Build Anonymous

12:58 PM Bug #15093 (Resolved): Repeat NC email is generating Based on the frequency Set in Business rules

Smitha V

04:58 PM Bug #15150 (Closed): Suite : About EwQMS window Close button is not visible

Shankar Narayanan

12:58 PM Bug #15150 (Resolved): Suite : About EwQMS window Close button is not visible

Smitha V

04:45 PM Bug #15053: Checklists-Audit topic in checklists set in audit pro listing in supplier template master menu

As discussed with DEV,as per design imported checklists and its default audit topic should display everywhere(supplie... Saradha Balan

04:43 PM Bug #15197 (Closed): Process VDA - Result and Documentation - After creating FourM or FourM category in Structure Analysis, Server error is displayed in Result and Documentation

Shankar Narayanan

12:58 PM Bug #15197 (Resolved): Process VDA - Result and Documentation - After creating FourM or FourM category in Structure Analysis, Server error is displayed in Result and Documentation

Smitha V

04:43 PM Bug #15157 (Closed): Supplier engagement->By default the selected supplier template is not showing. User needs to select from the lists

Verified and working fine in 921 cy1 Saradha Balan

12:55 PM Bug #15157 (Resolved): Supplier engagement->By default the selected supplier template is not showing. User needs to select from the lists

Smitha V

04:43 PM Bug #15161 (Closed): Risk master-Site name by default display Corporate for non corporate site also on edit

Verified and working fine in 921 cy1 Saradha Balan

12:55 PM Bug #15161 (Resolved): Risk master-Site name by default display Corporate for non corporate site also on edit

Smitha V

04:42 PM Bug #15165 (Closed): Supplier creation-Issue 1:Even after selecting risks level "Please select risk level" alert is displaying.Issue2: Selected risk level is not showing in supplier creation screen.pls refer screen shot

Verified and working fine in 921 cy1 Saradha Balan

12:55 PM Bug #15165 (Resolved): Supplier creation-Issue 1:Even after selecting risks level "Please select risk level" alert is displaying.Issue2: Selected risk level is not showing in supplier creation screen.pls refer screen shot

Smitha V

04:38 PM Bug #15194 (Closed): Design and Process VDA - Result & Documentation - Alert message is displayed after opening Result & Documentation

Shankar Narayanan

12:58 PM Bug #15194 (Resolved): Design and Process VDA - Result & Documentation - Alert message is displayed after opening Result & Documentation

Smitha V

04:38 PM Bug #15193 (Closed): Design and Process VDA - Result & Documentation - System allows to enter the Data in Project Name,Team and Timing fields.(Refer Description)

Shankar Narayanan

12:58 PM Bug #15193 (Resolved): Design and Process VDA - Result & Documentation - System allows to enter the Data in Project Name,Team and Timing fields.(Refer Description)

Smitha V

04:35 PM Bug #15183 (Closed): Process VDA - Result & Documentation - Risk Scope in Action Priority displays Process Flow Document instead of PFMEA

Shankar Narayanan

12:58 PM Bug #15183 (Resolved): Process VDA - Result & Documentation - Risk Scope in Action Priority displays Process Flow Document instead of PFMEA

Smitha V

03:52 PM Bug #15052 (Closed): Assign author, draft requests needing viewing: When clicking on save, there is no loading symbol,

Ragavi Ram

12:58 PM Bug #15052 (Resolved): Assign author, draft requests needing viewing: When clicking on save, there is no loading symbol,

Smitha V

03:51 PM Bug #15121 (Closed): User replacement: when the document name and number has a text like <Doc Name> or <Doc Num>, then its displayed null in corresponding tasks.(Same for routes creation)

Ragavi Ram

12:58 PM Bug #15121 (Resolved): User replacement: when the document name and number has a text like <Doc Name> or <Doc Num>, then its displayed null in corresponding tasks.(Same for routes creation)

Smitha V

03:43 PM Bug #15131 (Closed): Reports : Clicking on the Reports 404 error occurs

Ragavi Ram

12:58 PM Bug #15131 (Resolved): Reports : Clicking on the Reports 404 error occurs

Smitha V

03:43 PM Bug #15179 (Closed): Escalation - New Routes - Click on Save without selecting any reminder , the alert displays "object object"

Ragavi Ram

12:58 PM Bug #15179 (Resolved): Escalation - New Routes - Click on Save without selecting any reminder , the alert displays "object object"

Smitha V

02:57 PM Bug #15188 (Closed): Block Diagram: While enabling automate diagram check box, scope for the element is not displayed

Anonymous

12:58 PM Bug #15188 (Resolved): Block Diagram: While enabling automate diagram check box, scope for the element is not displayed

Smitha V

02:56 PM Bug #15156 (Closed): VQI – If Multiple VQI’s assigned then on deselecting any one user, all the users gets deselected

verified and working fine in 921 cy1 Saradha Balan

12:55 PM Bug #15156 (Resolved): VQI – If Multiple VQI’s assigned then on deselecting any one user, all the users gets deselected

Smitha V

02:56 PM Bug #15054 (Closed): Risk level-not site specific

verified and working fine in 921 cy1 Saradha Balan

12:55 PM Bug #15054 (Resolved): Risk level-not site specific

Smitha V

02:52 PM Bug #14940 (Closed): Supplier Management: Score settings->If it is color based,then score value displays 000.Pls refer screen shot

working fine Saradha Balan

12:55 PM Bug #14940 (Resolved): Supplier Management: Score settings->If it is color based,then score value displays 000.Pls refer screen shot

Smitha V

02:40 PM Bug #15097 (Closed): Receiving Inspection scheduling : Need to put a validation if the received qty is greater than ordered qty

Anonymous

12:58 PM Bug #15097 (Resolved): Receiving Inspection scheduling : Need to put a validation if the received qty is greater than ordered qty

Smitha V

02:30 PM Bug #15166 (Closed): Import is not working

Anonymous

12:58 PM Bug #15166 (Resolved): Import is not working

Smitha V

01:17 PM Bug #14945 (Closed): Design VDA - Failure Analysis - After removing the Function to Function flowdown allocation for one PI, all the allocations are removed at a time. And Tree view displays "No data found". (Refer Description and Steps)

Closed in SP920 Cycle 5 Shankar Narayanan

12:58 PM Bug #14945 (Resolved): Design VDA - Failure Analysis - After removing the Function to Function flowdown allocation for one PI, all the allocations are removed at a time. And Tree view displays "No data found". (Refer Description and Steps)

Smitha V

12:58 PM Bug #15185 (Resolved): Social Media: Planned Maintenance widgets extract pop up window-->Click on Die WO--> The Equipment name and code should be renamed to Die Name/Die Code

Smitha V

12:58 PM Bug #15184 (Resolved): Die PM Calendar: When a die technician requested the spare part and then clicked on planned maintenance and then PM Calendar breadcrumb, it redirecting to the Equipment PM Calendar

Smitha V

12:58 PM Bug #15103 (Resolved): Batch Manager: The PM/BD/Die-->The reminder mail is getting generated in name of Escalation mail in batch manager job list

Smitha V

12:58 PM Bug #15056 (Resolved): Equipment: Not able to delete the Utility Equipment

Smitha V

12:56 PM Bug #14979 (Closed): Design VDA - Structure Analysis - Alert while dragging the System element and dropping in Component is not proper

Closed in SP920 Cycle 5 Shankar Narayanan

12:55 PM Bug #15083 (Resolved): Supplier evaluation screen-Need history log for changing status from inactive to active and vice versa for VAM and VEM audit in

Smitha V

12:55 PM Bug #15079 (Resolved): VAM audit-Score status displaying twice in view checklists details page

Smitha V

12/03/2019

08:19 PM Bug #13272 (Resolved): Emails are not generated from Corporate site. In wires and cables, mails are generating but it shows wrong persons in TO email. it should trigger email to the person based on the site rights

Anonymous

08:11 PM Bug #15009 (Resolved): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA

Anonymous

05:40 PM Bug #15009 (Not Fixed with Hotfix): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA

Issue occurs in Design VDA Shankar Narayanan

08:09 PM Bug #15203 (Resolved): Design VDA - Failure Analysis - De-allocated element is not removed in Failure Analysis (Refer Description)

Anonymous

06:09 PM Bug #15203 (Open): Design VDA - Failure Analysis - De-allocated element is not removed in Failure Analysis (Refer Description)

User Admin

03:11 PM Bug #15203 (Resolved): Design VDA - Failure Analysis - De-allocated element is not removed in Failure Analysis (Refer Description)

• Unchecked element is again displayed in Tree Diagram.
• Horizontal Scrollbar is not displayed while opening or r... Shankar Narayanan

07:20 PM Bug #15103 (Fixed with Hotfix): Batch Manager: The PM/BD/Die-->The reminder mail is getting generated in name of Escalation mail in batch manager job list

Kiruthika G

06:10 PM Bug #14979 (Fixed with Hotfix): Design VDA - Structure Analysis - Alert while dragging the System element and dropping in Component is not proper

User Admin

06:10 PM Bug #14979 (Open): Design VDA - Structure Analysis - Alert while dragging the System element and dropping in Component is not proper

User Admin

06:02 PM Bug #14979: Design VDA - Structure Analysis - Alert while dragging the System element and dropping in Component is not proper

As discussed with Rengaraj, Alert while copying Subsystem to Subcomponent is handled in different method. So Closing ... Shankar Narayanan

06:09 PM Bug #15197 (Fixed with Hotfix): Process VDA - Result and Documentation - After creating FourM or FourM category in Structure Analysis, Server error is displayed in Result and Documentation

User Admin

06:09 PM Bug #15197 (Open): Process VDA - Result and Documentation - After creating FourM or FourM category in Structure Analysis, Server error is displayed in Result and Documentation

User Admin

12:45 PM Bug #15197 (Closed): Process VDA - Result and Documentation - After creating FourM or FourM category in Structure Analysis, Server error is displayed in Result and Documentation

After creating FourM or FourM category in Structure Analysis, Server error is displayed in Result and Documentation Shankar Narayanan

06:08 PM Bug #15196 (Open): DFMEA: When New PI is created in FST, by default it is creating an Technical Safety Requirement Group in DFMEA (Refer Description)

User Admin

12:35 PM Bug #15196 (Closed): DFMEA: When New PI is created in FST, by default it is creating an Technical Safety Requirement Group in DFMEA (Refer Description)

When New PI is created in FST, by default it is creating a Technical Safety Requirement Group in DFMEA (Refer Descrip... Anonymous

05:54 PM Bug #15006 (Fixed with Hotfix): Multi SIte: When the integrated document is from Aqua pro and when doing change request for that document, it shows a blank screen and the change request is not done

Ragavi Ram

05:39 PM Bug #15015 (Fixed with Hotfix): Design and Process VDA - Result & Documentation - Filter option for High/Medium/Low Action Priority is not working

Shankar Narayanan

05:37 PM Bug #15183 (Fixed with Hotfix): Process VDA - Result & Documentation - Risk Scope in Action Priority displays Process Flow Document instead of PFMEA

Shankar Narayanan

05:36 PM Bug #14952 (Not Fixed with Hotfix): Social media: The time 00:00 displays for UBM, CBM, Autonomous, adhoc completed WO.

Kiruthika G

05:32 PM Bug #15056 (Fixed with Hotfix): Equipment: Not able to delete the Utility Equipment

Kiruthika G

05:24 PM Bug #14940 (Fixed with Hotfix): Supplier Management: Score settings->If it is color based,then score value displays 000.Pls refer screen shot

working fine Saradha Balan

05:23 PM Bug #15184 (Fixed with Hotfix): Die PM Calendar: When a die technician requested the spare part and then clicked on planned maintenance and then PM Calendar breadcrumb, it redirecting to the Equipment PM Calendar

Kiruthika G

05:20 PM Bug #15185 (Fixed with Hotfix): Social Media: Planned Maintenance widgets extract pop up window-->Click on Die WO--> The Equipment name and code should be renamed to Die Name/Die Code

Kiruthika G

04:03 PM Bug #15175 (Fixed with Hotfix): Corrective action closeout displays 404 error when clicked on View hyperlink of the attached document

Verified as hot fix on 03-12-2019 Anonymous

03:53 PM Bug #15147 (Fixed with Hotfix): Suite : Under Widget preference->Widget configuration when double clicked on Grid displays blank

Issue verified in SP_920.1 Anonymous

03:51 PM Bug #15150 (Fixed with Hotfix): Suite : About EwQMS window Close button is not visible

Issue verified in SP_920.1 Anonymous

03:31 PM Bug #15201 (Resolved): Thought Auditee response is completed system displays as auditee not yet responded and System allows to closeout the findings

Nikhil d

03:31 PM Bug #15201 (Open): Thought Auditee response is completed system displays as auditee not yet responded and System allows to closeout the findings

Nikhil d

01:19 PM Bug #15201 (Closed): Thought Auditee response is completed system displays as auditee not yet responded and System allows to closeout the findings

Thought Auditee response is completed system displays as auditee not yet responded and System allows to closeout the ... Anonymous

02:41 PM Bug #15200 (Resolved): Through Auditee response and Auditor closeout date and time is available for One of the findings System displays as deadline violated.

Nikhil d

02:41 PM Bug #15200 (Open): Through Auditee response and Auditor closeout date and time is available for One of the findings System displays as deadline violated.

Nikhil d

01:13 PM Bug #15200 (Closed): Through Auditee response and Auditor closeout date and time is available for One of the findings System displays as deadline violated.

Through Auditee response and Auditor closeout date and time is available for One of the findings System displays as d... Anonymous

02:15 PM Bug #15157 (Fixed with Hotfix): Supplier engagement->By default the selected supplier template is not showing. User needs to select from the lists

working fine Saradha Balan

01:19 PM Bug #15052 (Fixed with Hotfix): Assign author, draft requests needing viewing: When clicking on save, there is no loading symbol,

Ragavi Ram

01:08 PM Bug #15199 (Closed): Auditee response form is taking Long time to Load the form

Auditee response form is taking Long time to Load the form
more than 30 sec to load Anonymous

01:06 PM Bug #15198 (Closed): Auditee response form Hyperlinks on LHS are not displaying for all the forms

Auditee response form Hyperlinks on LHS are not displaying for all the forms Anonymous

01:05 PM Bug #15121 (Fixed with Hotfix): User replacement: when the document name and number has a text like <Doc Name> or <Doc Num>, then its displayed null in corresponding tasks.(Same for routes creation)

Ragavi Ram

01:04 PM Bug #14945 (Fixed with Hotfix): Design VDA - Failure Analysis - After removing the Function to Function flowdown allocation for one PI, all the allocations are removed at a time. And Tree view displays "No data found". (Refer Description and Steps)

Shankar Narayanan

12:52 PM Bug #14953 (Resolved): Inspection form Standard : Attached files are not displaying after clicking on save

given fix Anonymous

12:52 PM Bug #15023 (Resolved): Inprocess Inspection : Data not displaying correctly in Inspection sheet on applying Responsible party filter

given fix Anonymous

12:46 PM Bug #15194 (Fixed with Hotfix): Design and Process VDA - Result & Documentation - Alert message is displayed after opening Result & Documentation

Shankar Narayanan

12:29 PM Bug #15181: Audit calendar->After adding supplier or entity in field not able to remove by clicking on close

issue verified in SP_920.1 and changed the status Anonymous

11:52 AM Bug #15181 (Fixed with Hotfix): Audit calendar->After adding supplier or entity in field not able to remove by clicking on close

issue verified in SP 902.1 build and closed Anonymous

12:29 PM Bug #15093 (Fixed with Hotfix): Repeat NC email is generating Based on the frequency Set in Business rules

issue verified in SP_920.1 and changed the status Anonymous

12:28 PM Bug #15131 (Fixed with Hotfix): Reports : Clicking on the Reports 404 error occurs

Ragavi Ram

12:26 PM Bug #15179 (Fixed with Hotfix): Escalation - New Routes - Click on Save without selecting any reminder , the alert displays "object object"

Ragavi Ram

11:47 AM Bug #15039 (Yet to Verify): Multi site:Social media->First time changing from corporate to other site session is getting expired

to be verified in new build as it is replicated only on first time log in Saradha Balan

11:44 AM Bug #15080 (Closed): IE-VAM report displays improper alignment

Saradha Balan

10:50 AM Bug #15062 (Closed): Document approval: Last Approver takes more time while approving the document

Ragavi Ram

10:50 AM Bug #15062 (Fixed with Hotfix): Document approval: Last Approver takes more time while approving the document

Ragavi Ram

12/02/2019

09:43 PM Bug #15157 (Resolved): Supplier engagement->By default the selected supplier template is not showing. User needs to select from the lists

Prabhu P

09:43 PM Bug #15129 (Resolved): Issues with Supplier BOM Import

Prabhu P

09:43 PM Bug #15130 (Resolved): Supplier Type mismatch with supplier info and part info sheet.

working as per desgin Prabhu P

09:42 PM Bug #15164 (Resolved): Supplier Creation-Risk level selection-Application prompting to enter reason for select option when changing from any level description

Working as per desgin Prabhu P

01:15 PM Bug #15164 (Not Resolved): Supplier Creation-Risk level selection-Application prompting to enter reason for select option when changing from any level description

Selecting "select" option option also prompting to enter reason Saradha Balan

09:27 PM Bug #15190 (Resolved): Target PPM : Search operation is not working for any columns

Anonymous

04:01 PM Bug #15190 (In Progress): Target PPM : Search operation is not working for any columns

Anonymous

11:49 AM Bug #15190 (Not Fixed with Hotfix): Target PPM : Search operation is not working for any columns

Search by Customer/Supplier is not working Anonymous

05:35 PM Bug #15188 (Fixed with Hotfix): Block Diagram: While enabling automate diagram check box, scope for the element is not displayed

Anonymous

02:31 PM Bug #15188 (Resolved): Block Diagram: While enabling automate diagram check box, scope for the element is not displayed

Anonymous

05:35 PM Bug #15162 (Fixed with Hotfix): Bill of Material Should be Renamed as Item element in following places

Anonymous

02:32 PM Bug #15162 (Resolved): Bill of Material Should be Renamed as Item element in following places

Anonymous

11:14 AM Bug #15162 (In Progress): Bill of Material Should be Renamed as Item element in following places

Anonymous

05:18 PM Bug #15056 (Resolved): Equipment: Not able to delete the Utility Equipment

Anonymous

04:06 PM Bug #15185 (Resolved): Social Media: Planned Maintenance widgets extract pop up window-->Click on Die WO--> The Equipment name and code should be renamed to Die Name/Die Code

Anonymous

04:01 PM Bug #13272 (In Progress): Emails are not generated from Corporate site. In wires and cables, mails are generating but it shows wrong persons in TO email. it should trigger email to the person based on the site rights

Anonymous

04:01 PM Bug #15023 (In Progress): Inprocess Inspection : Data not displaying correctly in Inspection sheet on applying Responsible party filter

Anonymous

03:14 PM Bug #15165 (Fixed with Hotfix): Supplier creation-Issue 1:Even after selecting risks level "Please select risk level" alert is displaying.Issue2: Selected risk level is not showing in supplier creation screen.pls refer screen shot

working fine Saradha Balan

03:14 PM Bug #15119 (Fixed with Hotfix): Social Media Widgets : Report and Report name displaying is wrong

Anonymous

03:05 PM Bug #15083 (Fixed with Hotfix): Supplier evaluation screen-Need history log for changing status from inactive to active and vice versa for VAM and VEM audit in

http://192.168.100.248/EwQIMS_Inst3 Saradha Balan

03:04 PM Bug #15054 (Fixed with Hotfix): Risk level-not site specific

working fine.design has changed according to site Saradha Balan

01:40 PM Bug #15184 (Resolved): Die PM Calendar: When a die technician requested the spare part and then clicked on planned maintenance and then PM Calendar breadcrumb, it redirecting to the Equipment PM Calendar

Anonymous

12:58 PM Bug #15161 (Fixed with Hotfix): Risk master-Site name by default display Corporate for non corporate site also on edit

working fine Saradha Balan

12:47 PM Bug #15156 (Fixed with Hotfix): VQI – If Multiple VQI’s assigned then on deselecting any one user, all the users gets deselected

working fine Saradha Balan

12:44 PM Bug #15189 (Closed): Multi site->After selecting Risk level page has not auto refreshed to add part.manually we need to refresh

working fine Saradha Balan

11:11 AM Bug #15121 (Resolved): User replacement: when the document name and number has a text like <Doc Name> or <Doc Num>, then its displayed null in corresponding tasks.(Same for routes creation)

Jacqueline Antonette

11:07 AM Bug #15179 (Resolved): Escalation - New Routes - Click on Save without selecting any reminder , the alert displays "object object"

Raghu Ram