Activity
From 10/22/2019 to 11/20/2019
11/20/2019
- 08:15 PM Bug #14996 (Fixed with Hotfix): Inprocess Inspection : If multiple operations are selected in inspection entry form ,characteristics corresponding to only one operation is displaying in the Inspection sheet
- 08:14 PM Bug #14991 (Fixed with Hotfix): Inprocess Inspection sheet: Value displayed in frequency column is wrong
- 02:06 PM Bug #14991 (Resolved): Inprocess Inspection sheet: Value displayed in frequency column is wrong
- Not able to replicate
- 08:14 PM Bug #14962 (Fixed with Hotfix): Supervisor Approval sheet : Unable to perform search operations in any of the columns
- 04:10 PM Bug #14962 (Resolved): Supervisor Approval sheet : Unable to perform search operations in any of the columns
- 08:14 PM Bug #14800 (Fixed with Hotfix): Receiving Inspection : Reaction Plan not getting created
- 07:57 PM Bug #14800 (Resolved): Receiving Inspection : Reaction Plan not getting created
- Conditional formatting is applied in receiving inspection form
- 08:09 PM Bug #14966 (Resolved): Results & Documentation - JS Error is displayed while opening Results & Documentation (Step 7)
- 07:43 PM Bug #15027 (Resolved): Design VDA - Percentage allocation - Alignment for Step 7 is not proper in Design VDA
- 06:18 PM Bug #15027 (Not Fixed with Hotfix): Design VDA - Percentage allocation - Alignment for Step 7 is not proper in Design VDA
- 05:33 PM Bug #15027 (Resolved): Design VDA - Percentage allocation - Alignment for Step 7 is not proper in Design VDA
- 05:32 PM Bug #15027 (Open): Design VDA - Percentage allocation - Alignment for Step 7 is not proper in Design VDA
- 05:11 PM Bug #15027 (Closed): Design VDA - Percentage allocation - Alignment for Step 7 is not proper in Design VDA
- Alignment for Step 7 is not proper in Design VDA
- 07:37 PM Bug #15009 (Resolved): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA
- 07:31 PM Bug #15031 (Closed): VAM audit-VQI auto rights-Actions page->Module name displays "Audit Pro" instead it should display "Supplier management"
- VAM audit-VQI auto rights-Actions page->Module name displays "Audit Pro" instead it should display "Supplier management"
- 06:55 PM Bug #14932 (Resolved): Design VDA - Failure Analysis: Function to function flowdown/up can be performed in failure Analysis but requirement Flowdown/up cannot be done
- Not on issues
- 04:28 PM Bug #14932: Design VDA - Failure Analysis: Function to function flowdown/up can be performed in failure Analysis but requirement Flowdown/up cannot be done
- Not On Issues
- 06:48 PM Bug #15025 (Resolved): Design VDA - Structure Analysis - Created PI is displayed only after refresh
- 06:17 PM Bug #15025 (Not Fixed with Hotfix): Design VDA - Structure Analysis - Created PI is displayed only after refresh
- 05:27 PM Bug #15025 (Resolved): Design VDA - Structure Analysis - Created PI is displayed only after refresh
- 05:27 PM Bug #15025 (Open): Design VDA - Structure Analysis - Created PI is displayed only after refresh
- 05:07 PM Bug #15025 (Closed): Design VDA - Structure Analysis - Created PI is displayed only after refresh
- Neither Arrow nor PI is displayed in the Structure Analysis
- 06:43 PM Bug #14994 (Resolved): Production OEE: Once the WO is generated, not able to view the losses list for selected parts
- Not able to replicate
- 06:43 PM Bug #14959 (Resolved): Social media(Equipment and Die PM Supervisor calendar): When supervisor tries to click on save and submit button, it displays error message
- 05:43 PM Bug #14959 (Not Fixed with Hotfix): Social media(Equipment and Die PM Supervisor calendar): When supervisor tries to click on save and submit button, it displays error message
- 03:25 PM Bug #14959 (Resolved): Social media(Equipment and Die PM Supervisor calendar): When supervisor tries to click on save and submit button, it displays error message
- Not able to replicate.
- 06:43 PM Bug #14957 (Resolved): Social Media: Planned maintenance--> When extracting the PM pop up window, the spare part availability status not showing properly.
- 05:42 PM Bug #14957 (Not Fixed with Hotfix): Social Media: Planned maintenance--> When extracting the PM pop up window, the spare part availability status not showing properly.
- 01:48 PM Bug #14957 (Resolved): Social Media: Planned maintenance--> When extracting the PM pop up window, the spare part availability status not showing properly.
- 06:43 PM Bug #14936 (Resolved): PM and Die: Team and Maintenance activity person--> When selecting and saving the different person for the activity, it displays the logged in person name in activity users field
- 05:30 PM Bug #14936 (Not Fixed with Hotfix): PM and Die: Team and Maintenance activity person--> When selecting and saving the different person for the activity, it displays the logged in person name in activity users field
- 03:12 PM Bug #14936 (Resolved): PM and Die: Team and Maintenance activity person--> When selecting and saving the different person for the activity, it displays the logged in person name in activity users field
- 06:43 PM Bug #14915 (Resolved): Email: Default/Reminder mail verification - While verifying the spot mail, the escalation email is getting displayed in the Batch manager jobs
- 06:42 PM Bug #15021 (Resolved): Escalation Mail: Escalation mail is not getting generated for Autonomous and adhoc WO
- 06:42 PM Bug #15030 (Closed): Sort,Scrap Rework Quantity's are not displaying in Department worksheet for Inprocess Inspection
- Sort,Scrap, Rework Quantity's are not displaying in Department worksheet for Inprocess Inspection
- 06:29 PM Bug #14928 (Fixed with Hotfix): VEM->Event audit->Schedule audit page->Part details is missing.pls refer screen shot
- Working as expected
- 06:29 PM Bug #14923 (Fixed with Hotfix): VAM audit->Perform audit->Unable to export VAM report in perform audit.No action on clicking Export button
- Working as expected
- 06:29 PM Bug #14880 (Fixed with Hotfix): Supplier Management: Score settings->If supplier template not specified there is no validation alert on saving
- Working as expected
- 06:28 PM Bug #14838 (Fixed with Hotfix): Supplier Management: Alignment issue in all view log screen.No expand option to view full description.refer screen shot
- Working as expected
- 06:27 PM Bug #14929 (Fixed with Hotfix): VEM->Event audit schedule->Audit has created against with audit program and audit type name as supplier assessment instead it should display (Segment 1,2,3,4) and its audit type
- Working as expected
- 06:27 PM Bug #14943 (Closed): Supplier Management: label missing-corrective action close out-view edit checklists page.Pls refer screen shot
- Working as expected
- 06:26 PM Bug #14956 (Fixed with Hotfix): Supplier Management: VAM audit->VAM Publish report->Audit team name is empty
- Working as expected
- 10:35 AM Bug #14956 (Resolved): Supplier Management: VAM audit->VAM Publish report->Audit team name is empty
- 06:26 PM Bug #14972 (Fixed with Hotfix): Supplier MAnagement: By default Risk level plant name should display as Corporate
- Working as expected
- 06:25 PM Bug #14974 (Fixed with Hotfix): Supplier Management:Risk master->User should able to check Is Qualified checkbox for multiple risk level and those should lists in supplier creation creation for parts addition.
- Working as expected
- 06:21 PM Bug #14976 (Not Resolved): Supplier Management: Supplier Evaluation->Score log and evaluation status log displays details irrespective of supplier name
- Still Issue exist.Able to see score status irrespective f supplier name.
Check C S M auto tech supplier shows differ... - 06:17 PM Bug #14942 (Resolved): In Initiate problem solving page SCAR form, if the the supplier user tries to add a new row in Root Cause analysis, the row is getting added to the top of the form.
- 06:17 PM Bug #15010 (Fixed with Hotfix): Supplier Management: Unable to delete score status.No action upon selecting Ok button in "Do you want to delete" alert
- Working as expected
- 06:17 PM Bug #15001 (Fixed with Hotfix): IFM - Header for Function is displayed in the Left corner but header for Requirement is aligned in the Center
- 04:54 PM Bug #15001 (Resolved): IFM - Header for Function is displayed in the Left corner but header for Requirement is aligned in the Center
- 02:20 PM Bug #15001 (In Progress): IFM - Header for Function is displayed in the Left corner but header for Requirement is aligned in the Center
- 06:16 PM Bug #14968 (Fixed with Hotfix): Process VDA - Result & Documentation - While opening Result & Documentation system displays Server error
- 03:31 PM Bug #14968 (Resolved): Process VDA - Result & Documentation - While opening Result & Documentation system displays Server error
- 02:02 PM Bug #14968 (Not Fixed with Hotfix): Process VDA - Result & Documentation - While opening Result & Documentation system displays Server error
- 01:00 PM Bug #14968 (Resolved): Process VDA - Result & Documentation - While opening Result & Documentation system displays Server error
- 06:15 PM Bug #15012 (Fixed with Hotfix): Supplier Management: Event audit->Audit type showing wrong in schedule audit page->If an audit program(segment 3) contains more than one audit type (plant trial,APQP trail) then after scheduling,in schedule audit page Audit type showing wrong
- Working as expected
- 06:14 PM Bug #15013 (Fixed with Hotfix): Supplier Management:Event audit-Plant address shows all the address instead it should display only respective parts plant address
- Working as expected
- 06:14 PM Bug #15014 (Fixed with Hotfix): Event audit->Scheduling audit page->Why it is save and add button?.Save button is enough for one time scheduling audit
- Working as expecetd
- 06:14 PM Bug #15017 (Fixed with Hotfix): Unable to do event audit.After saving the scheduled audit,no audit generated
- Able to to event audit.audit has generated in perform audit screen
- 05:56 PM Bug #14926 (Resolved): Batch Manager: Jobs--> When tries to run Check spare part reorder level mail, the system getting hanged and also mail is not generated
- 05:52 PM Bug #14918 (Fixed with Hotfix): TSR: While clicking on insert branch in TSR, it creates duplicate Id for different Requirements
- 04:55 PM Bug #14918 (Resolved): TSR: While clicking on insert branch in TSR, it creates duplicate Id for different Requirements
- 03:25 PM Bug #14918 (In Progress): TSR: While clicking on insert branch in TSR, it creates duplicate Id for different Requirements
- 03:16 PM Bug #14918 (Not Fixed with Hotfix): TSR: While clicking on insert branch in TSR, it creates duplicate Id for different Requirements
- 10:58 AM Bug #14918 (Resolved): TSR: While clicking on insert branch in TSR, it creates duplicate Id for different Requirements
- 05:51 PM Bug #14965 (Fixed with Hotfix): Scheduler page: Irrelevant audit program is displayed in Audit scheduler.
- 05:47 PM Bug #14982 (Fixed with Hotfix): Receiving Inspection : Expected Inspection date is displaying only in MM/DD/YY format even though the date is updated in preferences
- 03:09 PM Bug #14982 (Resolved): Receiving Inspection : Expected Inspection date is displaying only in MM/DD/YY format even though the date is updated in preferences
- given fix
- 05:46 PM Bug #14990 (Fixed with Hotfix): Inprocess Inspection : Production date not getting saved
- 02:05 PM Bug #14990 (Resolved): Inprocess Inspection : Production date not getting saved
- given fix
- 05:45 PM Bug #14997 (Fixed with Hotfix): Inprocess Inspection : Total record count is wrongly displayed
- 05:45 PM Bug #15008 (Fixed with Hotfix): Multi Site ->Inspection sampling plan : Inspection mode and quality level standards are not listing in the dropdown
- 05:44 PM Bug #14987 (Resolved): Result and Documentation : Block diagram displayed differently in Result and Documentation menu
- 05:34 PM Bug #14987 (In Progress): Result and Documentation : Block diagram displayed differently in Result and Documentation menu
- 05:41 PM Bug #15029 (Closed): Inspection sheet : No validation set while trying to Accept/Reject the lot without entering all variable characteristics samples
- Inspection sheet : No validation set while trying to Accept/Reject the lot without entering all variable characterist...
- 05:36 PM Bug #14950 (Fixed with Hotfix): Email content-->Die PM Supervisor Calendar and Die PM Calendar-->The Equipment name and Equipment code should be renamed to Die Name and Die code.
- 05:33 PM Bug #14944 (Fixed with Hotfix): Die PM Supervisor calendar: The scheduled WO is not showing in the calendar PM maintenance list
- 05:28 PM Bug #14922 (Fixed with Hotfix): New Document Request/Draft->A check box to denote whether the document is ITAR is displayed in New Document Request and New Document Draft even if the ITAR is not enabled in Suite Configuration settings.
- 05:27 PM Bug #14955 (Fixed with Hotfix): New document request and draft: Select level popup: Search and refresh are not working
- 05:26 PM Bug #14919 (Fixed with Hotfix): Email--> Request to complete--> The time of Actual start date and Actual end date is not showing in the mail content
- 05:24 PM Bug #15015 (Yet to Verify): Design and Process VDA - Result & Documentation - Filter option for High/Medium/Low Action Priority is not working
- 05:06 PM Bug #15015 (Resolved): Design and Process VDA - Result & Documentation - Filter option for High/Medium/Low Action Priority is not working
- #1.Filter option for High/Medium/Low Action Priority is not working --> As per the requirement it works once the 7th ...
- 05:19 PM Bug #15028 (Closed): Design VDA - Structure Analysis - System does not allow to add Component element under System element. Displays alert.
- System does not allow to add Component element under System element. Displays alert.
- 05:16 PM Bug #15003 (Resolved): Equipment part linkage: When a user tries to delete the selected part in Aqua pro, the part name showing in the list of selected equipment, but it is not displays in the Equipment part Setup linkage pop up window
- 05:16 PM Bug #14906 (Resolved): Design VDA - Structure Analysis - System allows to Drag Focus element and Drop(Move) on External element. While doing this scenario, Diagram and Level number collapses randomly.
- 05:09 PM Bug #15026 (Closed): VAM Publish Report->Please remove Class A/B heading in VAM report,it has displayed for VDA and ISO template.pls refer screen shot
- VAM Publish Report->Please remove Class A/B heading in VAM report,it has displayed for VDA and ISO template.Pls refe...
- 05:04 PM Bug #14988 (Resolved): Design VDA - Result & Documentation - Following issues occurs in Result & Documentation(Refer Description)
- #1. High/Medium/Low buttons can be of ON/OFF type --> as per the requirement we have implemented the button as clicki...
- 01:03 PM Bug #14988 (Not Fixed with Hotfix): Design VDA - Result & Documentation - Following issues occurs in Result & Documentation(Refer Description)
- • All the Headers can be of same Font Size and Style - "The overall risk reduced as follows" is not Changed yet
• ... - 11:35 AM Bug #14988 (Resolved): Design VDA - Result & Documentation - Following issues occurs in Result & Documentation(Refer Description)
- 04:58 PM Bug #14893 (Resolved): Block Diagram - Focus element name is not visible in dark theme.
- 03:13 PM Bug #14893 (In Progress): Block Diagram - Focus element name is not visible in dark theme.
- 02:51 PM Bug #14893 (Not Fixed with Hotfix): Block Diagram - Focus element name is not visible in dark theme.
- 10:57 AM Bug #14893 (Resolved): Block Diagram - Focus element name is not visible in dark theme.
- 04:56 PM Bug #14948 (Resolved): Design VDA - Failure Analysis - JS error is displayed and Page is not loading in Failure analysis.
- 04:32 PM Suggestion #14969 (Resolved): Business Rule-->Reminder settings/Assign Route--> Need Separate reminder setting field for Autonomous, ADHOC, Die TBM, Die Autonomous and Die ADHOC
- Die TBM, Die Autonomous and Die ADHOC - TBD
other added - 03:36 PM Bug #14952 (Resolved): Social media: The time 00:00 displays for UBM, CBM, Autonomous, adhoc completed WO.
- Not an issue. Same definition code for Spare part request and usage which has no start time and end time.
- 03:24 PM Bug #14975 (Fixed with Hotfix): TSR: Label header is displayed as "Functional Safety Requirement" instead of "Technical Safety Concept"
- 10:59 AM Bug #14975 (Resolved): TSR: Label header is displayed as "Functional Safety Requirement" instead of "Technical Safety Concept"
- 03:23 PM Bug #14971 (Fixed with Hotfix): TSR: Label is displayed as "Requirement Allocation Document" instead of "Technical Safety Concept"
- 10:59 AM Bug #14971 (Resolved): TSR: Label is displayed as "Requirement Allocation Document" instead of "Technical Safety Concept"
- 03:06 PM Bug #15024 (Closed): Supplier management : All Parts (Approved/Non Approved) corresponding to supplier is listed in Receiving Inspection scheduling
- Supplier management : All Parts (Approved/Non Approved) corresponding to supplier is listed in Receiving Inspection s...
- 03:00 PM Bug #14902 (Fixed with Hotfix): TSR - ASIL value is not centre aligned and Bold in TSR document
- 10:58 AM Bug #14902 (Resolved): TSR - ASIL value is not centre aligned and Bold in TSR document
- 02:59 PM Bug #14899 (Fixed with Hotfix): Operational Situation - Add exposure by pressing enter key is displaying alert message.(Refer Description)
- 10:57 AM Bug #14899 (Resolved): Operational Situation - Add exposure by pressing enter key is displaying alert message.(Refer Description)
- 02:57 PM Bug #14897 (Fixed with Hotfix): BOM is not converted as Item element
- 10:57 AM Bug #14897 (Resolved): BOM is not converted as Item element
- 02:56 PM Bug #14894 (Fixed with Hotfix): When pressing enter key in Exposure Value "There is no option to add exposure" pop up window is displayed unwantedly
- 10:56 AM Bug #14894 (Resolved): When pressing enter key in Exposure Value "There is no option to add exposure" pop up window is displayed unwantedly
- 02:55 PM Bug #14905 (Fixed with Hotfix): clicking on Export button in the view log no response and in View log - it is allowing to select the "To date" less than the "From Date".
- 02:52 PM Bug #14949 (Resolved): After logged in as supplier user with Social media layout, in approach widget pop up if the user click on form link, there is no response from application
- 02:52 PM Bug #14938 (Resolved): In Concern creation and Evaluation pages, if the user adds any attachment and clicking on save/Submit shows Empty alert message and the concern is not getting saved.
- 02:46 PM Bug #14979 (Yet to Verify): Design VDA - Structure Analysis - Alert while dragging the System element and dropping in Component is not proper
- 11:18 AM Bug #14979 (Resolved): Design VDA - Structure Analysis - Alert while dragging the System element and dropping in Component is not proper
- 02:44 PM Bug #14904 (Fixed with Hotfix): Replace the audit status legends in the part details - Supplier Management
- 02:44 PM Bug #14907 (Fixed with Hotfix): In DocPro created user is not added in the Everyone group.
- 02:42 PM Suggestion #14961: While creating Teams the Entity should show same as the selected site by default(usability Issue)
- Issue Fixed with hotfix - Not able to change the status
Patch verified by QA on Nov 19 - 02:41 PM Suggestion #14961 (Resolved): While creating Teams the Entity should show same as the selected site by default(usability Issue)
- 02:42 PM Bug #14980 (Not Fixed with Hotfix): Main2: Recommended Actions Column, While trying to do the Multi-Select action its throwing JS Error
- 11:52 AM Bug #14980 (Resolved): Main2: Recommended Actions Column, While trying to do the Multi-Select action its throwing JS Error
- Fixed and patches applied on Server
- 02:41 PM Bug #14889 (Fixed with Hotfix): Main2: D/PFMEA Recommended Actions Column is not working (Without Multi-Select Option)
- 02:40 PM Bug #14890 (Fixed with Hotfix): Main2: D/PFMEA, Effects Column is not working as expected (Without Multi-Select Option)
- 02:40 PM Bug #14983 (Fixed with Hotfix): Document viewer publish-When published multiple times it is showing as separate revision in Docpro
- 02:39 PM Bug #14999 (Fixed with Hotfix): Imported Checklist when clicked on checklist name displays server error
- 02:39 PM Bug #15002 (Fixed with Hotfix): Checkpoint score value and color code after save and retrieve does not display
- 02:39 PM Bug #14931 (Fixed with Hotfix): Design VDA - Failure Analysis - Function to function flowup is displayed in green Dotted lines and Flow Down is displayed in Black solid line
- 10:47 AM Bug #14931 (Resolved): Design VDA - Failure Analysis - Function to function flowup is displayed in green Dotted lines and Flow Down is displayed in Black solid line
- 02:37 PM Bug #15011 (Fixed with Hotfix): Pending requests: When clicking on document number link, shows error
- 02:35 PM Bug #14993 (Fixed with Hotfix): Documents - Revision History summary >> when clicking on the Download icon the page keeps loading.
- 02:21 PM Bug #14900 (Fixed with Hotfix): Design VDA - Block Diagram - Focus element name is not displayed in VDA Block Diagram
- 10:58 AM Bug #14900 (Resolved): Design VDA - Block Diagram - Focus element name is not displayed in VDA Block Diagram
- 02:12 PM Bug #14954 (Fixed with Hotfix): Design VDA - Structure Analysis - Design for context menu is not good.
- 11:36 AM Bug #14954 (Resolved): Design VDA - Structure Analysis - Design for context menu is not good.
- 02:10 PM Bug #14964 (Fixed with Hotfix): Design VDA - Results & Documentation - Data added in Planning and Preparation is listed in Result and Conclusion
- 11:37 AM Bug #14964 (Resolved): Design VDA - Results & Documentation - Data added in Planning and Preparation is listed in Result and Conclusion
- 01:04 PM Bug #15016 (Resolved): User replacement: Tasks are not displayed for the user "Bhuvana" in corporate site and in PPT1 site it dispalyed the owned documents.Route task is also not displayed for the user who has been in the route
- 01:01 PM Bug #15023 (Closed): Inprocess Inspection : Data not displaying correctly in Inspection sheet on applying Responsible party filter
- Inprocess Inspection : Data not displaying correctly in Inspection sheet on applying Responsible party filter
- 12:58 PM Bug #14981 (Fixed with Hotfix): Percentage Allocation - Step 7 is not displayed in Percentage allocation
- 11:36 AM Bug #14981 (Resolved): Percentage Allocation - Step 7 is not displayed in Percentage allocation
- 12:23 PM Bug #15022 (Closed): Search Inspection Entry : Lot details are not displaying in drop down list if multiple operations are selected
- Search Inspection Entry : Lot details are not displaying in drop down list if multiple operations are selected
- 11:52 AM Bug #14908 (Fixed with Hotfix): Risk page showing error
- 10:42 AM Bug #14908: Risk page showing error
- mark had made some changes in 915,so after included that it's working fine.
- 10:17 AM Bug #15018 (Resolved): After adding location details for parts in supplier creation screen,grid is not properly aligned
- 10:04 AM Bug #14998 (Fixed with Hotfix): Inprocess Inspection : Responsible person is not displaying in Inspection entry pop-up, even though the same is provided in control plan
11/19/2019
- 08:47 PM Bug #14966 (In Progress): Results & Documentation - JS Error is displayed while opening Results & Documentation (Step 7)
- 09:50 AM Bug #14966 (Open): Results & Documentation - JS Error is displayed while opening Results & Documentation (Step 7)
- 08:47 PM Bug #14988 (In Progress): Design VDA - Result & Documentation - Following issues occurs in Result & Documentation(Refer Description)
- 09:50 AM Bug #14988 (Open): Design VDA - Result & Documentation - Following issues occurs in Result & Documentation(Refer Description)
- 08:47 PM Bug #15009 (In Progress): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA
- 07:19 PM Bug #15009 (Open): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA
- 02:37 PM Bug #15009 (Not Resolved): Result & Documentation - "The overall risk reduced as follows" table is not working as per Action Priority - DFMEA & PFMEA
- AP Values are not updated as per DFMEA
- 08:41 PM Bug #14998 (Resolved): Inprocess Inspection : Responsible person is not displaying in Inspection entry pop-up, even though the same is provided in control plan
- Not an issue
Need to enable code in config report data - 07:34 PM Bug #14998 (Open): Inprocess Inspection : Responsible person is not displaying in Inspection entry pop-up, even though the same is provided in control plan
- 12:12 PM Bug #14998 (Closed): Inprocess Inspection : Responsible person is not displaying in Inspection entry pop-up, even though the same is provided in control plan
- Inprocess Inspection : Responsible person is not displaying in Inspection entry pop-up, even though the same is provi...
- 08:40 PM Bug #14997 (Resolved): Inprocess Inspection : Total record count is wrongly displayed
- 06:00 PM Bug #14997 (In Progress): Inprocess Inspection : Total record count is wrongly displayed
- 05:59 PM Bug #14997 (Open): Inprocess Inspection : Total record count is wrongly displayed
- 12:08 PM Bug #14997 (Closed): Inprocess Inspection : Total record count is wrongly displayed
- Inprocess Inspection : Total record count is wrongly displayed
- 08:17 PM Bug #14889 (Resolved): Main2: D/PFMEA Recommended Actions Column is not working (Without Multi-Select Option)
- Fixed and patches applied on server
- 06:08 PM Bug #14889 (Not Fixed with Hotfix): Main2: D/PFMEA Recommended Actions Column is not working (Without Multi-Select Option)
- 04:56 PM Bug #14889 (Resolved): Main2: D/PFMEA Recommended Actions Column is not working (Without Multi-Select Option)
- Fixed and patches applied on Server
- 08:16 PM Bug #14890 (Resolved): Main2: D/PFMEA, Effects Column is not working as expected (Without Multi-Select Option)
- Fixed and patches applied on server
- 06:07 PM Bug #14890 (Not Fixed with Hotfix): Main2: D/PFMEA, Effects Column is not working as expected (Without Multi-Select Option)
- 04:56 PM Bug #14890 (Resolved): Main2: D/PFMEA, Effects Column is not working as expected (Without Multi-Select Option)
- Fixed and patches applied on Server
- 08:10 PM Bug #14984: FSR Document: FSR Menu is not displayed in the following Scenario
- Not Replicated
- 09:50 AM Bug #14984 (Open): FSR Document: FSR Menu is not displayed in the following Scenario
- 08:03 PM Bug #15008 (Resolved): Multi Site ->Inspection sampling plan : Inspection mode and quality level standards are not listing in the dropdown
- 06:10 PM Bug #15008 (In Progress): Multi Site ->Inspection sampling plan : Inspection mode and quality level standards are not listing in the dropdown
- 06:10 PM Bug #15008 (Open): Multi Site ->Inspection sampling plan : Inspection mode and quality level standards are not listing in the dropdown
- 02:23 PM Bug #15008 (Closed): Multi Site ->Inspection sampling plan : Inspection mode and quality level standards are not listing in the dropdown
- Multi Site ->Inspection sampling plan : Inspection mode and quality level standards are not listing in the drop down
- 07:55 PM Bug #15000 (Resolved): For IC module admins, by default no menus are displayed while clicking on IC module
- 06:09 PM Bug #15000 (In Progress): For IC module admins, by default no menus are displayed while clicking on IC module
- 06:08 PM Bug #15000 (Open): For IC module admins, by default no menus are displayed while clicking on IC module
- 12:27 PM Bug #15000 (Closed): For IC module admins, by default no menus are displayed while clicking on IC module
- For IC module admins, by default no menus are displayed while clicking on IC module
- 07:53 PM Bug #15007 (Resolved): Assign author: When saving the user it shows blank alert message and the document needing revision is not displayed to the assign author. Due to this cant revise the integrated docment
- 07:34 PM Bug #15007 (Open): Assign author: When saving the user it shows blank alert message and the document needing revision is not displayed to the assign author. Due to this cant revise the integrated docment
- 04:44 PM Bug #15007: Assign author: When saving the user it shows blank alert message and the document needing revision is not displayed to the assign author. Due to this cant revise the integrated docment
- only when customise email message are checked,
When customise email meessages are unchecked, then when assigned th... - 02:23 PM Bug #15007 (Closed): Assign author: When saving the user it shows blank alert message and the document needing revision is not displayed to the assign author. Due to this cant revise the integrated docment
- Assign author: When saving the user it shows blank alert message and the document needing revision is not displayed t...
- 07:53 PM Bug #15011 (Resolved): Pending requests: When clicking on document number link, shows error
- 07:34 PM Bug #15011 (Open): Pending requests: When clicking on document number link, shows error
- 03:05 PM Bug #15011 (Closed): Pending requests: When clicking on document number link, shows error
- Pending requests: When clicking on document number link, shows error
- 07:39 PM Bug #14950: Email content-->Die PM Supervisor Calendar and Die PM Calendar-->The Equipment name and Equipment code should be renamed to Die Name and Die code.
- Not an issue.
This is a notification email for the assigned Die TBM Workorder
Die TBM Workorder Code
- 07:39 PM Bug #14950 (Resolved): Email content-->Die PM Supervisor Calendar and Die PM Calendar-->The Equipment name and Equipment code should be renamed to Die Name and Die code.
- 12:00 PM Bug #14950 (Open): Email content-->Die PM Supervisor Calendar and Die PM Calendar-->The Equipment name and Equipment code should be renamed to Die Name and Die code.
- 07:34 PM Bug #15021 (Open): Escalation Mail: Escalation mail is not getting generated for Autonomous and adhoc WO
- 06:18 PM Bug #15021 (Closed): Escalation Mail: Escalation mail is not getting generated for Autonomous and adhoc WO
- Issue 1: Escalation Mail: The TBM reminder mail is generated in name of Escalation mail and in batch manager the dupl...
- 07:34 PM Bug #15020 (Open): Auditee Response : LO form-> Date picker need to display in opened date & Target date and status need to as completed ,In progress.
- 05:53 PM Bug #15020 (Closed): Auditee Response : LO form-> Date picker need to display in opened date & Target date and status need to as completed ,In progress.
- 07:34 PM Bug #15016 (Open): User replacement: Tasks are not displayed for the user "Bhuvana" in corporate site and in PPT1 site it dispalyed the owned documents.Route task is also not displayed for the user who has been in the route
- 03:27 PM Bug #15016 (Closed): User replacement: Tasks are not displayed for the user "Bhuvana" in corporate site and in PPT1 site it dispalyed the owned documents.Route task is also not displayed for the user who has been in the route
- User replacement: Tasks are not displayed for the user "Bhuvana" in corporate site and in PPT1 site it dispalyed the ...
- 07:34 PM Bug #15006 (Open): Multi SIte: When the integrated document is from Aqua pro and when doing change request for that document, it shows a blank screen and the change request is not done
- 02:13 PM Bug #15006 (Closed): Multi SIte: When the integrated document is from Aqua pro and when doing change request for that document, it shows a blank screen and the change request is not done
- Multi Site: When the integrated document is from Aqua pro and when doing change request for that document, it shows a...
- 07:34 PM Bug #15004 (Open): While publishing the Inspection sheet, Document name is displayed as "Undefined"
- 01:56 PM Bug #15004 (Closed): While publishing the Inspection sheet, Document name is displayed as "Undefined"
- While publishing the Inspection sheet, Document name is displayed as "Undefined"
- 07:34 PM Bug #15003 (Open): Equipment part linkage: When a user tries to delete the selected part in Aqua pro, the part name showing in the list of selected equipment, but it is not displays in the Equipment part Setup linkage pop up window
- 01:04 PM Bug #15003 (Closed): Equipment part linkage: When a user tries to delete the selected part in Aqua pro, the part name showing in the list of selected equipment, but it is not displays in the Equipment part Setup linkage pop up window
- Equipment part linkage: When a user tries to delete the selected part in Aqua pro, the part name showing in the list ...
- 07:34 PM Bug #15001 (Open): IFM - Header for Function is displayed in the Left corner but header for Requirement is aligned in the Center
- 12:30 PM Bug #15001 (Closed): IFM - Header for Function is displayed in the Left corner but header for Requirement is aligned in the Center
- Issue is faced in FST also. But it is not replicate. But in VDA it is replicate.
- 07:34 PM Suggestion #14961 (Open): While creating Teams the Entity should show same as the selected site by default(usability Issue)
- 07:34 PM Suggestion #14960 (Open): Social Media: Planned maintenance widgets--> Need differentiation for Equipment PM and Die PM WO and also in Planned maintenance pop up window
- 07:30 PM Bug #14999 (Resolved): Imported Checklist when clicked on checklist name displays server error
- 07:29 PM Bug #14999 (Open): Imported Checklist when clicked on checklist name displays server error
- cannot able to replicate
- 12:22 PM Bug #14999 (Closed): Imported Checklist when clicked on checklist name displays server error
- Imported Checklist when clicked on checklist name displays server error
- 07:30 PM Bug #15002 (Resolved): Checkpoint score value and color code after save and retrieve does not display
- 07:29 PM Bug #15002 (Open): Checkpoint score value and color code after save and retrieve does not display
- cannot able to replicate
- 12:32 PM Bug #15002 (Closed): Checkpoint score value and color code after save and retrieve does not display
- Checkpoint score value and color code after save and retrieve does not display
- 07:29 PM Bug #14967 (Resolved): Supplier Management: VAM and VEM->If audit fails and disqualified then there is no option to disqualify the related parts
- 09:50 AM Bug #14967 (Open): Supplier Management: VAM and VEM->If audit fails and disqualified then there is no option to disqualify the related parts
- 07:19 PM Bug #15015 (Open): Design and Process VDA - Result & Documentation - Filter option for High/Medium/Low Action Priority is not working
- 03:25 PM Bug #15015 (Closed): Design and Process VDA - Result & Documentation - Filter option for High/Medium/Low Action Priority is not working
- Filter option for High/Medium/Low Action Priority is not working
- 06:48 PM Bug #14993 (Resolved): Documents - Revision History summary >> when clicking on the Download icon the page keeps loading.
- 12:00 PM Bug #14993 (Open): Documents - Revision History summary >> when clicking on the Download icon the page keeps loading.
- 11:27 AM Bug #14993 (Closed): Documents - Revision History summary >> when clicking on the Download icon the page keeps loading.
- Documents - Revision History summary >> when clicking on the Download icon the page keeps loading
- 06:42 PM Bug #14996 (Resolved): Inprocess Inspection : If multiple operations are selected in inspection entry form ,characteristics corresponding to only one operation is displaying in the Inspection sheet
- 05:51 PM Bug #14996 (In Progress): Inprocess Inspection : If multiple operations are selected in inspection entry form ,characteristics corresponding to only one operation is displaying in the Inspection sheet
- 12:00 PM Bug #14996 (Open): Inprocess Inspection : If multiple operations are selected in inspection entry form ,characteristics corresponding to only one operation is displaying in the Inspection sheet
- 11:44 AM Bug #14996 (Closed): Inprocess Inspection : If multiple operations are selected in inspection entry form ,characteristics corresponding to only one operation is displaying in the Inspection sheet
- Inprocess Inspection : If multiple operations are selected in inspection entry form ,characteristics corresponding to...
- 06:38 PM Bug #14912 (Not Fixed with Hotfix): Inspection Sampling Plan : Single/Multiple Delete operation is not working
- Multiple delete is not working
On performing multiple delete alert is displaying as Deleted successfully,but data ... - 02:18 PM Bug #14912 (Resolved): Inspection Sampling Plan : Single/Multiple Delete operation is not working
- 06:37 PM Bug #14992 (Fixed with Hotfix): Inprocess Inspection sheet is not going for supervisor approval after submission
- 05:49 PM Bug #14992 (Resolved): Inprocess Inspection sheet is not going for supervisor approval after submission
- 12:00 PM Bug #14992 (Open): Inprocess Inspection sheet is not going for supervisor approval after submission
- 10:55 AM Bug #14992 (Closed): Inprocess Inspection sheet is not going for supervisor approval after submission
- Inprocess Inspection sheet is not going for supervisor approval after submission
- 06:33 PM Bug #14919 (Resolved): Email--> Request to complete--> The time of Actual start date and Actual end date is not showing in the mail content
- 06:30 PM Bug #14951 (Fixed with Hotfix): Switch Inspection : Unable to perform delete operation
- 03:32 PM Bug #14951 (Resolved): Switch Inspection : Unable to perform delete operation
- 12:00 PM Bug #14951 (Open): Switch Inspection : Unable to perform delete operation
- 06:30 PM Bug #14913 (Fixed with Hotfix): Sample size code letters : Error on clicking on save button while adding a new record
- 02:19 PM Bug #14913 (Resolved): Sample size code letters : Error on clicking on save button while adding a new record
- 06:23 PM Bug #14911 (Fixed with Hotfix): Inspection Sampling Plan : Search by supplier not working
- 11:09 AM Bug #14911 (Resolved): Inspection Sampling Plan : Search by supplier not working
- 06:21 PM Bug #14909 (Fixed with Hotfix): Target PPM : Getting server error on clicking the menu
- 11:07 AM Bug #14909 (Resolved): Target PPM : Getting server error on clicking the menu
- 06:16 PM Bug #14944 (Resolved): Die PM Supervisor calendar: The scheduled WO is not showing in the calendar PM maintenance list
- 06:16 PM Bug #15019 (Resolved): Multi site issue:Schedule audit icon not available for supplier who completes registration in multi site
- 06:11 PM Bug #15019 (Open): Multi site issue:Schedule audit icon not available for supplier who completes registration in multi site
- 05:46 PM Bug #15019 (Closed): Multi site issue:Schedule audit icon not available for supplier who completes registration in multi site
- Multi site issue:Schedule audit icon not available for supplier who completes registration in multi site
- 06:13 PM Bug #15018 (Open): After adding location details for parts in supplier creation screen,grid is not properly aligned
- 05:22 PM Bug #15018 (Closed): After adding location details for parts in supplier creation screen,grid is not properly aligned
- After adding location details for parts in supplier creation screen,grid is not properly aligned
- 06:13 PM Bug #15010 (Resolved): Supplier Management: Unable to delete score status.No action upon selecting Ok button in "Do you want to delete" alert
- 06:13 PM Bug #15010 (Open): Supplier Management: Unable to delete score status.No action upon selecting Ok button in "Do you want to delete" alert
- 02:56 PM Bug #15010 (Closed): Supplier Management: Unable to delete score status.No action upon selecting Ok button in "Do you want to delete" alert
- Supplier Management: Unable to delete score status.No action upon selecting Ok button in "Do you want to delete" alert
- 06:08 PM Bug #14947 (Fixed with Hotfix): Import New Menu: Import is not working
- 06:06 PM Bug #14892 (Fixed with Hotfix): Main2: DFMEA, Potential Causes of Failure Column is not working (Without Multi-Select)
- 04:57 PM Bug #14892 (Resolved): Main2: DFMEA, Potential Causes of Failure Column is not working (Without Multi-Select)
- Fixed and patches applied on Server
- 06:06 PM Bug #14962 (In Progress): Supervisor Approval sheet : Unable to perform search operations in any of the columns
- 12:00 PM Bug #14962 (Open): Supervisor Approval sheet : Unable to perform search operations in any of the columns
- 06:05 PM Bug #14946 (Fixed with Hotfix): Import Menu: Import is not working
- 10:52 AM Bug #14946 (Resolved): Import Menu: Import is not working
- Fixed and patches applied on Server
- 06:05 PM Bug #14958 (Not Fixed with Hotfix): Design Issue: Pop-Up window for the Effects, Prevention & Detection Controls, Recommended Actions Column is displaying as extra large size compared to old window (Without Multi-Select)
- 04:56 PM Bug #14958 (Resolved): Design Issue: Pop-Up window for the Effects, Prevention & Detection Controls, Recommended Actions Column is displaying as extra large size compared to old window (Without Multi-Select)
- Fixed and patches applied on Server
- 12:00 PM Bug #14958 (Open): Design Issue: Pop-Up window for the Effects, Prevention & Detection Controls, Recommended Actions Column is displaying as extra large size compared to old window (Without Multi-Select)
- 06:03 PM Bug #14939 (Closed): Supplier Management: VAM audit->Perform audit->Audit report summary,Audit checklists summary->This report shows Abatek customers specific (shows abatek customer name).Need to oraganise this report globally or disable it
- Audit report and checklists audtit report has removed.Hence closing this defect
- 06:02 PM Bug #14977 (Fixed with Hotfix): Main 2: Global Search – Table Driven Columns is not working
- 10:53 AM Bug #14977 (Resolved): Main 2: Global Search – Table Driven Columns is not working
- Fixed and patches applied on Server
- 10:53 AM Bug #14977: Main 2: Global Search – Table Driven Columns is not working
- Fixed and patches applied on Server
- 09:50 AM Bug #14977 (Open): Main 2: Global Search – Table Driven Columns is not working
- 06:02 PM Bug #14978 (Fixed with Hotfix): Main2: Multi Select, there is no Scroll Bar for the required Columns which having more than 15 values
- 04:55 PM Bug #14978 (Resolved): Main2: Multi Select, there is no Scroll Bar for the required Columns which having more than 15 values
- Fixed and patches applied on Server
- 09:50 AM Bug #14978 (Open): Main2: Multi Select, there is no Scroll Bar for the required Columns which having more than 15 values
- 06:01 PM Bug #14980 (Not Fixed with Hotfix): Main2: Recommended Actions Column, While trying to do the Multi-Select action its throwing JS Error
- 04:56 PM Bug #14980 (Resolved): Main2: Recommended Actions Column, While trying to do the Multi-Select action its throwing JS Error
- Fixed and patches applied on Server
- 09:50 AM Bug #14980 (Open): Main2: Recommended Actions Column, While trying to do the Multi-Select action its throwing JS Error
- 05:59 PM Bug #14985 (In Progress): Rec and Final Inspection Sheet : Shows error on saving Defect phenomenon
- 09:50 AM Bug #14985 (Open): Rec and Final Inspection Sheet : Shows error on saving Defect phenomenon
- 05:59 PM Bug #14989 (Fixed with Hotfix): Main 2: Global Search – Table Driven Columns, there is no Icon
- 10:53 AM Bug #14989 (Resolved): Main 2: Global Search – Table Driven Columns, there is no Icon
- Fixed and patches applied on Server
- 09:50 AM Bug #14989 (Open): Main 2: Global Search – Table Driven Columns, there is no Icon
- 05:56 PM Bug #14990 (In Progress): Inprocess Inspection : Production date not getting saved
- 12:00 PM Bug #14990 (Open): Inprocess Inspection : Production date not getting saved
- 10:28 AM Bug #14990 (Closed): Inprocess Inspection : Production date not getting saved
- Inprocess Inspection : Production date not getting saved
- 05:52 PM Bug #14991 (In Progress): Inprocess Inspection sheet: Value displayed in frequency column is wrong
- 12:00 PM Bug #14991 (Open): Inprocess Inspection sheet: Value displayed in frequency column is wrong
- 10:52 AM Bug #14991 (Closed): Inprocess Inspection sheet: Value displayed in frequency column is wrong
- Inprocess Inspection sheet: Value displayed in frequency column is wrong
Frequency value provided in Control plan ... - 05:51 PM Bug #14982 (In Progress): Receiving Inspection : Expected Inspection date is displaying only in MM/DD/YY format even though the date is updated in preferences
- 09:50 AM Bug #14982 (Open): Receiving Inspection : Expected Inspection date is displaying only in MM/DD/YY format even though the date is updated in preferences
- 05:38 PM Bug #14930 (Resolved): Same username is showing for 2 different contact persons
- 05:38 PM Bug #14904 (Resolved): Replace the audit status legends in the part details - Supplier Management
- 05:38 PM Bug #14838 (Resolved): Supplier Management: Alignment issue in all view log screen.No expand option to view full description.refer screen shot
- 05:37 PM Bug #14905 (Resolved): clicking on Export button in the view log no response and in View log - it is allowing to select the "To date" less than the "From Date".
- 05:37 PM Bug #14972 (Resolved): Supplier MAnagement: By default Risk level plant name should display as Corporate
- 09:50 AM Bug #14972 (Open): Supplier MAnagement: By default Risk level plant name should display as Corporate
- 05:36 PM Bug #14974 (Resolved): Supplier Management:Risk master->User should able to check Is Qualified checkbox for multiple risk level and those should lists in supplier creation creation for parts addition.
- 09:50 AM Bug #14974 (Open): Supplier Management:Risk master->User should able to check Is Qualified checkbox for multiple risk level and those should lists in supplier creation creation for parts addition.
- 05:36 PM Bug #14976 (Resolved): Supplier Management: Supplier Evaluation->Score log and evaluation status log displays details irrespective of supplier name
- 09:50 AM Bug #14976 (Open): Supplier Management: Supplier Evaluation->Score log and evaluation status log displays details irrespective of supplier name
- 05:18 PM Bug #15014 (Resolved): Event audit->Scheduling audit page->Why it is save and add button?.Save button is enough for one time scheduling audit
- 05:18 PM Bug #15014 (Open): Event audit->Scheduling audit page->Why it is save and add button?.Save button is enough for one time scheduling audit
- 03:13 PM Bug #15014 (Closed): Event audit->Scheduling audit page->Why it is save and add button?.Save button is enough for one time scheduling audit
- Event audit->Scheduling audit page->Why it is save and add button?.Save button is enough for one time scheduling audit
- 05:18 PM Bug #15013 (Resolved): Supplier Management:Event audit-Plant address shows all the address instead it should display only respective parts plant address
- 05:18 PM Bug #15013 (Open): Supplier Management:Event audit-Plant address shows all the address instead it should display only respective parts plant address
- 03:11 PM Bug #15013 (Closed): Supplier Management:Event audit-Plant address shows all the address instead it should display only respective parts plant address
- Supplier Management:Event audit-Plant address shows all the address instead it should display only respective parts p...
- 05:18 PM Bug #15012 (Resolved): Supplier Management: Event audit->Audit type showing wrong in schedule audit page->If an audit program(segment 3) contains more than one audit type (plant trial,APQP trail) then after scheduling,in schedule audit page Audit type showing wrong
- 05:18 PM Bug #15012 (Open): Supplier Management: Event audit->Audit type showing wrong in schedule audit page->If an audit program(segment 3) contains more than one audit type (plant trial,APQP trail) then after scheduling,in schedule audit page Audit type showing wrong
- resolved
- 03:09 PM Bug #15012 (Closed): Supplier Management: Event audit->Audit type showing wrong in schedule audit page->If an audit program(segment 3) contains more than one audit type (plant trial,APQP trail) then after scheduling,in schedule audit page Audit type showing wrong
- Supplier Management: Event audit->Audit type showing wrong in schedule audit page->If an audit program(segment 3) con...
- 04:50 PM Bug #14908 (Resolved): Risk page showing error
- 04:22 PM Bug #15017 (Resolved): Unable to do event audit.After saving the scheduled audit,no audit generated
- 04:22 PM Bug #15017 (Open): Unable to do event audit.After saving the scheduled audit,no audit generated
- Not Show Stopper. goes for auditor auditee confirmation. Resolved
- 03:37 PM Bug #15017 (Closed): Unable to do event audit.After saving the scheduled audit,no audit generated
- Unable to do event audit.After saving the scheduled audit,no audit generated
- 03:33 PM Bug #14899 (In Progress): Operational Situation - Add exposure by pressing enter key is displaying alert message.(Refer Description)
- 03:32 PM Bug #14900 (In Progress): Design VDA - Block Diagram - Focus element name is not displayed in VDA Block Diagram
- 03:11 PM Bug #14975 (In Progress): TSR: Label header is displayed as "Functional Safety Requirement" instead of "Technical Safety Concept"
- 09:50 AM Bug #14975 (Open): TSR: Label header is displayed as "Functional Safety Requirement" instead of "Technical Safety Concept"
- 03:10 PM Bug #14971 (In Progress): TSR: Label is displayed as "Requirement Allocation Document" instead of "Technical Safety Concept"
- 09:50 AM Bug #14971 (Open): TSR: Label is displayed as "Requirement Allocation Document" instead of "Technical Safety Concept"
- 02:25 PM Bug #14884 (Fixed with Hotfix): Supplier Management:There is no Q_type while creating checklists->Section,Subsection,Checklists,checkpoint.Q_type is displaying only after setting up score
- Working fine
- 12:03 PM Bug #14884 (Resolved): Supplier Management:There is no Q_type while creating checklists->Section,Subsection,Checklists,checkpoint.Q_type is displaying only after setting up score
- 02:25 PM Bug #14882 (Fixed with Hotfix): Supplier Management:Score Settings->Unable to specify same score status (approved/Conditionaly Approved/Rejected) for different supplier template
- Working fine
- 02:23 PM Bug #14883 (Fixed with Hotfix): Supplier Management: Session expired after importing checklists and refreshed the EWQIMS application
- Working fine
- 12:22 PM Bug #14883 (Resolved): Supplier Management: Session expired after importing checklists and refreshed the EWQIMS application
- 02:23 PM Bug #14879 (Fixed with Hotfix): Supplier Management:Label missing in Risk level creation.pls refer screen shot
- Working fine
- 02:22 PM Bug #14878 (Fixed with Hotfix): Supplier Management:Empty alert upon saving levels in suite in addition with saved successfully alert
- Working fine
- 02:22 PM Bug #14881 (Fixed with Hotfix): Supplier Management:Score settings->If color based is chosen why it is mandatory to fill score values
- Working fine
- 02:22 PM Bug #14955 (Resolved): New document request and draft: Select level popup: Search and refresh are not working
- 12:00 PM Bug #14955 (Open): New document request and draft: Select level popup: Search and refresh are not working
- 02:22 PM Bug #14885 (Fixed with Hotfix): Supplier Management: Score not able to set for section/Checklists/Checkpoint.Specified score not getting saved
- Working fine
- 12:14 PM Bug #14885 (Resolved): Supplier Management: Score not able to set for section/Checklists/Checkpoint.Specified score not getting saved
- 02:21 PM Bug #14886 (Fixed with Hotfix): Supplier Management: Audit topic field is missing while creating checklists
- Working fine
- 12:13 PM Bug #14886 (Resolved): Supplier Management: Audit topic field is missing while creating checklists
- 02:21 PM Bug #14887 (Fixed with Hotfix): Supplier Management: Unable to add parts in supplier creation page.
- Working fine
- 02:21 PM Bug #14914 (Fixed with Hotfix): Supplier Management: Checklists->Q_type values (basic/conditional) duplicate value is showing.Pls refer screen shot
- Working fine
- 12:02 PM Bug #14914 (Resolved): Supplier Management: Checklists->Q_type values (basic/conditional) duplicate value is showing.Pls refer screen shot
- 02:20 PM Bug #14924 (Fixed with Hotfix): VAM audit->Perform audit->Unable to Submit to auditee .No action on clicking "Submit to auditee" button
- Working fine
- 02:20 PM Bug #14916 (Fixed with Hotfix): Supplier Management: Though Risklevel has selected application displays "Please select risk level" .Which is unable to add parts
- Working fine
- 02:19 PM Bug #14921 (Fixed with Hotfix): Unable to schedule VAM audit as "Please map checklists for supplier template" alert is displaying though checklists is already mapped
- working fine.able to schedule vam audit
- 02:19 PM Bug #14964 (In Progress): Design VDA - Results & Documentation - Data added in Planning and Preparation is listed in Result and Conclusion
- 12:00 PM Bug #14964 (Open): Design VDA - Results & Documentation - Data added in Planning and Preparation is listed in Result and Conclusion
- 02:18 PM Bug #14925 (Fixed with Hotfix): Supplier evaluation screen->Upon choosing Evaluation status as accepted and entered reason,application keep on asking to enter reason alert.unable to change the evaluation status due to this
- Working fine
- 01:18 PM Bug #14918 (In Progress): TSR: While clicking on insert branch in TSR, it creates duplicate Id for different Requirements
- 01:08 PM Bug #14928 (Resolved): VEM->Event audit->Schedule audit page->Part details is missing.pls refer screen shot
- 12:49 PM Bug #14954 (In Progress): Design VDA - Structure Analysis - Design for context menu is not good.
- 12:00 PM Bug #14954 (Open): Design VDA - Structure Analysis - Design for context menu is not good.
- 12:48 PM Bug #14981 (In Progress): Percentage Allocation - Step 7 is not displayed in Percentage allocation
- 09:50 AM Bug #14981 (Open): Percentage Allocation - Step 7 is not displayed in Percentage allocation
- 12:47 PM Bug #14968 (In Progress): Process VDA - Result & Documentation - While opening Result & Documentation system displays Server error
- 09:50 AM Bug #14968 (Open): Process VDA - Result & Documentation - While opening Result & Documentation system displays Server error
- 12:44 PM Bug #14902 (In Progress): TSR - ASIL value is not centre aligned and Bold in TSR document
- 12:02 PM Bug #14929 (Resolved): VEM->Event audit schedule->Audit has created against with audit program and audit type name as supplier assessment instead it should display (Segment 1,2,3,4) and its audit type
- 12:00 PM Bug #14994 (Open): Production OEE: Once the WO is generated, not able to view the losses list for selected parts
- 11:29 AM Bug #14994 (Closed): Production OEE: Once the WO is generated, not able to view the losses list for selected parts
- Production OEE: Once the WO is generated, not able to view the losses list for selected parts
- 12:00 PM Bug #14963 (Open): Supplier Management:VEM->Unable to do corrective action response using any of the CAR form.Car form not getting loaded
- 12:00 PM Bug #14959 (Open): Social media(Equipment and Die PM Supervisor calendar): When supervisor tries to click on save and submit button, it displays error message
- 12:00 PM Bug #14957 (Open): Social Media: Planned maintenance--> When extracting the PM pop up window, the spare part availability status not showing properly.
- 12:00 PM Bug #14956 (Open): Supplier Management: VAM audit->VAM Publish report->Audit team name is empty
- 12:00 PM Bug #14953 (Open): Inspection form Standard : Attached files are not displaying after clicking on save
- 12:00 PM Bug #14952 (Open): Social media: The time 00:00 displays for UBM, CBM, Autonomous, adhoc completed WO.
- 10:41 AM Bug #14965 (Resolved): Scheduler page: Irrelevant audit program is displayed in Audit scheduler.
- 09:50 AM Bug #14965 (Open): Scheduler page: Irrelevant audit program is displayed in Audit scheduler.
- 10:04 AM Bug #14897 (In Progress): BOM is not converted as Item element
- 10:04 AM Bug #14894 (In Progress): When pressing enter key in Exposure Value "There is no option to add exposure" pop up window is displayed unwantedly
- 10:04 AM Bug #14893 (In Progress): Block Diagram - Focus element name is not visible in dark theme.
- 09:50 AM Bug #14987 (Open): Result and Documentation : Block diagram displayed differently in Result and Documentation menu
- 09:50 AM Suggestion #14986 (Open): Few changes needs to be done in Inspection sheet,please check description
- 09:50 AM Bug #14983 (Open): Document viewer publish-When published multiple times it is showing as separate revision in Docpro
- 09:50 AM Bug #14979 (Open): Design VDA - Structure Analysis - Alert while dragging the System element and dropping in Component is not proper
- 09:50 AM Suggestion #14969 (Open): Business Rule-->Reminder settings/Assign Route--> Need Separate reminder setting field for Autonomous, ADHOC, Die TBM, Die Autonomous and Die ADHOC
11/18/2019
- 06:27 PM Bug #14989 (Closed): Main 2: Global Search – Table Driven Columns, there is no Icon
- Global Search – Table Driven Columns, there is no Icon
- 06:24 PM Bug #14988 (Closed): Design VDA - Result & Documentation - Following issues occurs in Result & Documentation(Refer Description)
- • Active Document - Space needed in between Result and Document
• All the Headers can be of same Font Size and Sty... - 06:18 PM Bug #14987 (Closed): Result and Documentation : Block diagram displayed differently in Result and Documentation menu
- Block diagram displayed differently in Result and Documentation menu
Refer Screenshot - 06:11 PM Bug #14943 (Resolved): Supplier Management: label missing-corrective action close out-view edit checklists page.Pls refer screen shot
- 01:20 PM Bug #14943 (Open): Supplier Management: label missing-corrective action close out-view edit checklists page.Pls refer screen shot
- 12:45 PM Bug #14943 (Closed): Supplier Management: label missing-corrective action close out-view edit checklists page.Pls refer screen shot
- label missing-corrective action close out-view edit checklists page.Pls refer screen shot
- 06:11 PM Bug #14940 (Resolved): Supplier Management: Score settings->If it is color based,then score value displays 000.Pls refer screen shot
- 01:20 PM Bug #14940 (Open): Supplier Management: Score settings->If it is color based,then score value displays 000.Pls refer screen shot
- 12:09 PM Bug #14940 (Closed): Supplier Management: Score settings->If it is color based,then score value displays 000.Pls refer screen shot
- Supplier Management: Score settings->If it is color based,then score value displays 000.Pls refer screen shot
- 06:11 PM Bug #14939 (Resolved): Supplier Management: VAM audit->Perform audit->Audit report summary,Audit checklists summary->This report shows Abatek customers specific (shows abatek customer name).Need to oraganise this report globally or disable it
- 01:20 PM Bug #14939 (Open): Supplier Management: VAM audit->Perform audit->Audit report summary,Audit checklists summary->This report shows Abatek customers specific (shows abatek customer name).Need to oraganise this report globally or disable it
- 12:07 PM Bug #14939 (Closed): Supplier Management: VAM audit->Perform audit->Audit report summary,Audit checklists summary->This report shows Abatek customers specific (shows abatek customer name).Need to oraganise this report globally or disable it
- Supplier Management: VAM audit->Perform audit->Audit report summary,Audit checklists summary->This report shows Abate...
- 06:11 PM Bug #14937 (Resolved): Supplier Management:Score/Color logic calculates wrong which results wrong score status and its color for VDA/ISO
- 01:20 PM Bug #14937 (Open): Supplier Management:Score/Color logic calculates wrong which results wrong score status and its color for VDA/ISO
- 12:03 PM Bug #14937 (Closed): Supplier Management:Score/Color logic calculates wrong which results wrong score status and its color for VDA/ISO
- Supplier Management:Score/Color logic calculates wrong which results wrong score status and its color for VDA/ISO
- 06:10 PM Bug #14920 (Fixed with Hotfix): Inspection Parameters : In characteristics grid only 10 items are displaying even though more than 10 items are there,also next button is disabled
- 06:10 PM Bug #14910 (Fixed with Hotfix): Target PPM menu name is not displaying in group rights
- 06:08 PM Suggestion #14986 (Closed): Few changes needs to be done in Inspection sheet,please check description
- 1.Inspection sheet : Replace Defect phenomenon with Defect
2.Invoice date : No need to show time
3.Operations colum... - 05:58 PM Bug #14985 (Closed): Rec and Final Inspection Sheet : Shows error on saving Defect phenomenon
- Rec and Final Inspection Sheet : Shows error on saving Defect phenomenon
- 05:56 PM Bug #14984 (Closed): FSR Document: FSR Menu is not displayed in the following Scenario
- FSR menu is not displayed for both Super parent and the selected BOM element when creating below hierarchy as PI(A) >...
- 05:51 PM Bug #14907 (Resolved): In DocPro created user is not added in the Everyone group.
- 05:51 PM Bug #14983 (Closed): Document viewer publish-When published multiple times it is showing as separate revision in Docpro
- Document viewer publish-When published multiple times it is showing as separate revision in Docpro (one listing/publish)
- 05:50 PM Bug #14982 (Closed): Receiving Inspection : Expected Inspection date is displaying only in MM/DD/YY format even though the date is updated in preferences
- Receiving Inspection : Expected Inspection date is displaying only in MM/DD/YY format even though the date is updated...
- 05:50 PM Bug #14981 (Closed): Percentage Allocation - Step 7 is not displayed in Percentage allocation
- Step 7 is not displayed in Percentage allocation
- 05:48 PM Bug #14922 (Resolved): New Document Request/Draft->A check box to denote whether the document is ITAR is displayed in New Document Request and New Document Draft even if the ITAR is not enabled in Suite Configuration settings.
- 05:46 PM Bug #14980 (Closed): Main2: Recommended Actions Column, While trying to do the Multi-Select action its throwing JS Error
- Recommended Actions Column, While trying to do the Multi-Select action its throwing JS Error "Line: 44
Error: Unable... - 05:43 PM Bug #14979 (Closed): Design VDA - Structure Analysis - Alert while dragging the System element and dropping in Component is not proper
- While dragging the System element and dropping in Component is not proper.
- 05:40 PM Bug #14978 (Closed): Main2: Multi Select, there is no Scroll Bar for the required Columns which having more than 15 values
- Multi Select, there is no Scroll Bar for the required Columns which having more than 15 values. For Eg: If the User s...
- 05:32 PM Bug #14977 (Closed): Main 2: Global Search – Table Driven Columns is not working
- Global Search – Table Driven Columns is not working. Its throwing Script Error
- 05:29 PM Bug #14976 (Closed): Supplier Management: Supplier Evaluation->Score log and evaluation status log displays details irrespective of supplier name
- Supplier Management: Supplier Evaluation->Score log and evaluation status log displays details irrespective of suppli...
- 05:27 PM Bug #14975 (Closed): TSR: Label header is displayed as "Functional Safety Requirement" instead of "Technical Safety Concept"
- Label header is displayed as ""Functional Safety Requirement"" instead of "Technical Safety Concept"
Refer Screens... - 05:24 PM Bug #14974 (Closed): Supplier Management:Risk master->User should able to check Is Qualified checkbox for multiple risk level and those should lists in supplier creation creation for parts addition.
- Supplier Management:Risk master->User should able to check Is Qualified checkbox for multiple risk level and those sh...
- 05:21 PM Bug #14972 (Closed): Supplier MAnagement: By default Risk level plant name should display as Corporate
- Supplier MAnagement: By default Risk level plant name should display as Corporate
- 05:20 PM Bug #14971 (Closed): TSR: Label is displayed as "Requirement Allocation Document" instead of "Technical Safety Concept"
- Label is displayed as "Requirement Allocation Document" instead of "Technical Safety Concept"
Refer Screenshot - 05:10 PM Suggestion #14969 (Closed): Business Rule-->Reminder settings/Assign Route--> Need Separate reminder setting field for Autonomous, ADHOC, Die TBM, Die Autonomous and Die ADHOC
- Business Rule-->Reminder settings--> Need Separate reminder setting field for Autonomous, ADHOC, Die TBM, Die Autonom...
- 05:05 PM Bug #14968 (Closed): Process VDA - Result & Documentation - While opening Result & Documentation system displays Server error
- While opening Result & Documentation system displays Server error
- 05:03 PM Bug #14967 (Closed): Supplier Management: VAM and VEM->If audit fails and disqualified then there is no option to disqualify the related parts
- Supplier Management: VAM and VEM->If audit fails and disqualified then there is no option to disqualify the related p...
- 05:00 PM Bug #14966 (Closed): Results & Documentation - JS Error is displayed while opening Results & Documentation (Step 7)
- JS Error is displayed while opening Step 7
- 04:57 PM Bug #14965 (Closed): Scheduler page: Irrelevant audit program is displayed in Audit scheduler.
- Scheduler page: Irrelevant audit program is displayed in Audit scheduler.
- 04:55 PM Bug #14964 (Closed): Design VDA - Results & Documentation - Data added in Planning and Preparation is listed in Result and Conclusion
- Data added in Planning and Preparation is listed in Result and Conclusion.
- 04:55 PM Bug #14963 (Closed): Supplier Management:VEM->Unable to do corrective action response using any of the CAR form.Car form not getting loaded
- Supplier Management:VEM->Unable to do corrective action response using any of the CAR form.Car form not getting loaded
- 04:48 PM Bug #14962 (Closed): Supervisor Approval sheet : Unable to perform search operations in any of the columns
- Supervisor Approval sheet : Unable to perform search operations in any of the columns
- 04:03 PM Suggestion #14961 (Closed): While creating Teams the Entity should show same as the selected site by default(usability Issue)
- While creating Teams the Entity should show same as the selected site by default
- 03:56 PM Suggestion #14960 (Open): Social Media: Planned maintenance widgets--> Need differentiation for Equipment PM and Die PM WO and also in Planned maintenance pop up window
- Social Media: Planned maintenance widgets--> Need differentiation for Equipment PM and Die PM WO and also in Planned ...
- 03:51 PM Bug #14959 (Closed): Social media(Equipment and Die PM Supervisor calendar): When supervisor tries to click on save and submit button, it displays error message
- Social media(Equipment and Die PM Supervisor calendar): When supervisor tries to click on save and submit button, it ...
- 03:43 PM Bug #14888 (Fixed with Hotfix): Document Publish: Publish is not working
- 02:53 PM Bug #14888 (Resolved): Document Publish: Publish is not working
- Fixed and patches applied in server
- 03:39 PM Bug #14958 (Closed): Design Issue: Pop-Up window for the Effects, Prevention & Detection Controls, Recommended Actions Column is displaying as extra large size compared to old window (Without Multi-Select)
- Pop-Up window for the Effects, Prevention & Detection Controls, Recommended Actions Column is displaying as extra lar...
- 03:30 PM Bug #14957 (Closed): Social Media: Planned maintenance--> When extracting the PM pop up window, the spare part availability status not showing properly.
- *Issue 1:* Social Media: Planned maintenance--> When extracting the PM pop up window, the spare part availability sta...
- 03:14 PM Bug #14956 (Closed): Supplier Management: VAM audit->VAM Publish report->Audit team name is empty
- Supplier Management: VAM audit->VAM Publish report->Audit team name is empty
- 03:05 PM Bug #14947: Import New Menu: Import is not working
- Not an issue Please clear the cache and retry.
- 01:20 PM Bug #14947 (Open): Import New Menu: Import is not working
- 01:03 PM Bug #14947 (Closed): Import New Menu: Import is not working
- While trying to Import any XML its displaying as "Can't find object class/attribute type hashtable in the cache" in t...
- 03:02 PM Bug #14882 (Resolved): Supplier Management:Score Settings->Unable to specify same score status (approved/Conditionaly Approved/Rejected) for different supplier template
- 03:01 PM Bug #14955 (Closed): New document request and draft: Select level popup: Search and refresh are not working
- New document request: Select level popup: Search and refresh are not working
- 03:01 PM Bug #14880 (Resolved): Supplier Management: Score settings->If supplier template not specified there is no validation alert on saving
- 03:01 PM Bug #14881 (Resolved): Supplier Management:Score settings->If color based is chosen why it is mandatory to fill score values
- 02:56 PM Bug #14954 (Closed): Design VDA - Structure Analysis - Design for context menu is not good.
- Design for context menu is not good.
- 02:51 PM Bug #14953 (Closed): Inspection form Standard : Attached files are not displaying after clicking on save
- Inspection form Standard : Attached files are not displaying after clicking on save
Attach from local machine : At... - 02:47 PM Bug #14952 (Not Fixed with Hotfix): Social media: The time 00:00 displays for UBM, CBM, Autonomous, adhoc completed WO.
- Social media: The time 00:00 displays for UBM, CBM, Autonomous, adhoc and PR for completed WO.
When clicking on t... - 02:36 PM Bug #14951 (Closed): Switch Inspection : Unable to perform delete operation
- Switch Inspection : Unable to perform delete operation
- 02:29 PM Bug #14950 (Closed): Email content-->Die PM Supervisor Calendar and Die PM Calendar-->The Equipment name and Equipment code should be renamed to Die Name and Die code.
- Email content-->Die PM Supervisor Calendar and Die PM Calendar-->The Equipment name and Equipment code should be rena...
- 01:20 PM Bug #14949 (Open): After logged in as supplier user with Social media layout, in approach widget pop up if the user click on form link, there is no response from application
- 01:06 PM Bug #14949 (Closed): After logged in as supplier user with Social media layout, in approach widget pop up if the user click on form link, there is no response from application
- After logged in as supplier user with Social media layout, in approach widget pop up if the user click on form link, ...
- 01:20 PM Bug #14948 (Open): Design VDA - Failure Analysis - JS error is displayed and Page is not loading in Failure analysis.
- 01:06 PM Bug #14948 (Closed): Design VDA - Failure Analysis - JS error is displayed and Page is not loading in Failure analysis.
- JS error is displayed in Failure analysis.
Issue occurs after doing Function to Function Flowdown directly withou... - 01:20 PM Bug #14946 (Open): Import Menu: Import is not working
- 12:59 PM Bug #14946 (Closed): Import Menu: Import is not working
- While trying to Import any XML its displaying as "Creating SvrManager failed with this error: ixmlsvrMgr.InitializeEn...
- 01:20 PM Bug #14945 (Open): Design VDA - Failure Analysis - After removing the Function to Function flowdown allocation for one PI, all the allocations are removed at a time. And Tree view displays "No data found". (Refer Description and Steps)
- 12:51 PM Bug #14945 (Closed): Design VDA - Failure Analysis - After removing the Function to Function flowdown allocation for one PI, all the allocations are removed at a time. And Tree view displays "No data found". (Refer Description and Steps)
- After removing the flowdown for one PI, all the allocations are removed at a time. And Tree view displays No data fo...
- 01:20 PM Bug #14944 (Open): Die PM Supervisor calendar: The scheduled WO is not showing in the calendar PM maintenance list
- 12:48 PM Bug #14944 (Closed): Die PM Supervisor calendar: The scheduled WO is not showing in the calendar PM maintenance list
- Issue 1: Die PM Supervisor calendar: The scheduled WO is not showing in the calendar PM maintenance list. When clicki...
- 01:20 PM Bug #14942 (Open): In Initiate problem solving page SCAR form, if the the supplier user tries to add a new row in Root Cause analysis, the row is getting added to the top of the form.
- 12:41 PM Bug #14942 (Closed): In Initiate problem solving page SCAR form, if the the supplier user tries to add a new row in Root Cause analysis, the row is getting added to the top of the form.
- In Initiate problem solving page SCAR form, if the the supplier user tries to add a new row in Root Cause analysis, t...
- 01:20 PM Bug #14941 (Open): New Document Request - While trying to upload document the system getting hang and showing Page unresponsive and as also for publishing it take more time than usual.
- 12:22 PM Bug #14941 (Closed): New Document Request - While trying to upload document the system getting hang and showing Page unresponsive and as also for publishing it take more time than usual.
- New Document Request - While trying to upload document the system getting hang and showing Page unresponsive and as a...
- 01:20 PM Bug #14938 (Open): In Concern creation and Evaluation pages, if the user adds any attachment and clicking on save/Submit shows Empty alert message and the concern is not getting saved.
- 12:04 PM Bug #14938 (Closed): In Concern creation and Evaluation pages, if the user adds any attachment and clicking on save/Submit shows Empty alert message and the concern is not getting saved.
- In Concern creation and Evaluation pages, if the user adds any attachment and clicking on save/Submit shows Empty ale...
- 01:20 PM Bug #14936 (Open): PM and Die: Team and Maintenance activity person--> When selecting and saving the different person for the activity, it displays the logged in person name in activity users field
- 12:03 PM Bug #14936 (Closed): PM and Die: Team and Maintenance activity person--> When selecting and saving the different person for the activity, it displays the logged in person name in activity users field
- Issue 1: PM: Team--> When selecting and saving the different person for the activity, it displays the logged in perso...
- 01:20 PM Suggestion #14933 (Open): New Route: Module should not be blank.Module is displayed only after saving
- 11:04 AM Suggestion #14933 (Closed): New Route: Module should not be blank.Module is displayed only after saving
- New Route: Module should not be blank.Module is displayed only after saving
- 01:20 PM Bug #14932 (Open): Design VDA - Failure Analysis: Function to function flowdown/up can be performed in failure Analysis but requirement Flowdown/up cannot be done
- 11:00 AM Bug #14932 (Closed): Design VDA - Failure Analysis: Function to function flowdown/up can be performed in failure Analysis but requirement Flowdown/up cannot be done
- In Failure Analysis it allows to perform function to function flowup/down but while trying Requirement Flowdown it th...
- 01:20 PM Bug #14931 (Open): Design VDA - Failure Analysis - Function to function flowup is displayed in green Dotted lines and Flow Down is displayed in Black solid line
- 10:57 AM Bug #14931 (Closed): Design VDA - Failure Analysis - Function to function flowup is displayed in green Dotted lines and Flow Down is displayed in Black solid line
- Failure Analysis - While doing function to function flow up, it displays green dotted line but when we do flow down ...
- 01:20 PM Bug #14930 (Open): Same username is showing for 2 different contact persons
- 01:20 PM Bug #14929 (Open): VEM->Event audit schedule->Audit has created against with audit program and audit type name as supplier assessment instead it should display (Segment 1,2,3,4) and its audit type
- 01:20 PM Bug #14928 (Open): VEM->Event audit->Schedule audit page->Part details is missing.pls refer screen shot
- 01:20 PM Suggestion #14927 (Open): Email: Need spare part usage email for Planned Maintenance and Brekadown WO
- 12:34 PM Bug #14877 (Fixed with Hotfix): Main2: PFMEA, Potential Causes of Failure Column is not working displaying JS Error (Without Multi-Select)
- 10:48 AM Bug #14876 (Fixed with Hotfix): Customize Email Messages: Remainder Email is repeating for more than 1 time
- This issue is fixed so changing the status as Fixed with Hotfix
11/14/2019
- 04:43 PM Bug #14925 (Resolved): Supplier evaluation screen->Upon choosing Evaluation status as accepted and entered reason,application keep on asking to enter reason alert.unable to change the evaluation status due to this
- 02:39 PM Bug #14925 (Open): Supplier evaluation screen->Upon choosing Evaluation status as accepted and entered reason,application keep on asking to enter reason alert.unable to change the evaluation status due to this
- 12:43 PM Bug #14925 (Closed): Supplier evaluation screen->Upon choosing Evaluation status as accepted and entered reason,application keep on asking to enter reason alert.unable to change the evaluation status due to this
- Supplier evaluation screen->Upon choosing Evaluation status as accepted and entered reason,application keep on asking...
- 04:43 PM Bug #14924 (Resolved): VAM audit->Perform audit->Unable to Submit to auditee .No action on clicking "Submit to auditee" button
- 02:39 PM Bug #14924 (Open): VAM audit->Perform audit->Unable to Submit to auditee .No action on clicking "Submit to auditee" button
- 12:07 PM Bug #14924 (Closed): VAM audit->Perform audit->Unable to Submit to auditee .No action on clicking "Submit to auditee" button
- VAM audit->Perform audit->Unable to Submit to auditee .No action on clicking "Submit to auditee" button
- 04:42 PM Bug #14923 (Resolved): VAM audit->Perform audit->Unable to export VAM report in perform audit.No action on clicking Export button
- 02:39 PM Bug #14923 (Open): VAM audit->Perform audit->Unable to export VAM report in perform audit.No action on clicking Export button
- 12:05 PM Bug #14923 (Closed): VAM audit->Perform audit->Unable to export VAM report in perform audit.No action on clicking Export button
- VAM audit->Perform audit->Unable to export VAM report in perform audit.No action on clicking Export button
- 04:42 PM Bug #14921 (Resolved): Unable to schedule VAM audit as "Please map checklists for supplier template" alert is displaying though checklists is already mapped
- 02:39 PM Bug #14921 (Open): Unable to schedule VAM audit as "Please map checklists for supplier template" alert is displaying though checklists is already mapped
- 11:54 AM Bug #14921 (Closed): Unable to schedule VAM audit as "Please map checklists for supplier template" alert is displaying though checklists is already mapped
- Unable to schedule VAM audit as "Please map checklists for supplier template" alert is displaying though checklists i...
- 04:42 PM Bug #14916 (Resolved): Supplier Management: Though Risklevel has selected application displays "Please select risk level" .Which is unable to add parts
- 02:39 PM Bug #14916 (Open): Supplier Management: Though Risklevel has selected application displays "Please select risk level" .Which is unable to add parts
- 11:27 AM Bug #14916 (Closed): Supplier Management: Though Risklevel has selected application displays "Please select risk level" .Which is unable to add parts
- Though Risklevel has selected application displays "Please select risk level" .Which is unable to add parts
- 04:40 PM Bug #14887 (Resolved): Supplier Management: Unable to add parts in supplier creation page.
- 04:40 PM Bug #14879 (Resolved): Supplier Management:Label missing in Risk level creation.pls refer screen shot
- 04:37 PM Bug #14878 (Resolved): Supplier Management:Empty alert upon saving levels in suite in addition with saved successfully alert
- 03:07 PM Bug #14930 (Closed): Same username is showing for 2 different contact persons
- Same username is showing for 2 different contact persons. This is showing after deactivating an existing user and add...
- 03:04 PM Bug #14929 (Closed): VEM->Event audit schedule->Audit has created against with audit program and audit type name as supplier assessment instead it should display (Segment 1,2,3,4) and its audit type
- VEM->Event audit schedule->Audit has created against with audit program and audit type name as supplier assessment in...
- 02:55 PM Bug #14928 (Closed): VEM->Event audit->Schedule audit page->Part details is missing.pls refer screen shot
- VEM->Event audit->Schedule audit page->Part details is missing.pls refer screen shot
- 02:39 PM Bug #14926 (Open): Batch Manager: Jobs--> When tries to run Check spare part reorder level mail, the system getting hanged and also mail is not generated
- 01:14 PM Bug #14926 (Closed): Batch Manager: Jobs--> When tries to run Check spare part reorder level mail, the system getting hanged and also mail is not generated
- Batch Manager: Jobs--> When tries to run Check spare part reorder level mail, the system getting hanged and also mail...
- 02:39 PM Bug #14922 (Open): New Document Request/Draft->A check box to denote whether the document is ITAR is displayed in New Document Request and New Document Draft even if the ITAR is not enabled in Suite Configuration settings.
- 11:57 AM Bug #14922 (Closed): New Document Request/Draft->A check box to denote whether the document is ITAR is displayed in New Document Request and New Document Draft even if the ITAR is not enabled in Suite Configuration settings.
- New Document Request/Draft->A check box to denote whether the document is ITAR is displayed in New Document Request a...
- 02:39 PM Bug #14920 (Open): Inspection Parameters : In characteristics grid only 10 items are displaying even though more than 10 items are there,also next button is disabled
- 11:44 AM Bug #14920 (Closed): Inspection Parameters : In characteristics grid only 10 items are displaying even though more than 10 items are there,also next button is disabled
- Inspection Parameters : In characteristics grid only 10 items are displaying even though more than 10 items are there...
- 02:39 PM Bug #14919 (Open): Email--> Request to complete--> The time of Actual start date and Actual end date is not showing in the mail content
- 11:43 AM Bug #14919 (Closed): Email--> Request to complete--> The time of Actual start date and Actual end date is not showing in the mail content
- Email--> Request to complete--> The time of Actual start date and Actual end date is not showing in the mail content
- 02:39 PM Bug #14918 (Open): TSR: While clicking on insert branch in TSR, it creates duplicate Id for different Requirements
- 11:39 AM Bug #14918 (Closed): TSR: While clicking on insert branch in TSR, it creates duplicate Id for different Requirements
- TSR: While clicking on insert branch in TSR, it creates duplicate Id for different Requirements
Refer Screenshot - 02:39 PM Bug #14915 (Open): Email: Default/Reminder mail verification - While verifying the spot mail, the escalation email is getting displayed in the Batch manager jobs
- 11:19 AM Bug #14915 (Closed): Email: Default/Reminder mail verification - While verifying the spot mail, the escalation email is getting displayed in the Batch manager jobs
- Email: Default mail verification - While verifying the spot mail, the reminder and escalation email is getting displa...
- 02:39 PM Bug #14914 (Open): Supplier Management: Checklists->Q_type values (basic/conditional) duplicate value is showing.Pls refer screen shot
- 11:18 AM Bug #14914 (Closed): Supplier Management: Checklists->Q_type values (basic/conditional) duplicate value is showing.Pls refer screen shot
- Checklists->Q_type values (basic/conditional) duplicate value is showing
- 02:39 PM Bug #14913 (Open): Sample size code letters : Error on clicking on save button while adding a new record
- 10:44 AM Bug #14913 (Closed): Sample size code letters : Error on clicking on save button while adding a new record
- Sample size code letters : Error on clicking on save button while adding a new record
- 02:39 PM Bug #14912 (Open): Inspection Sampling Plan : Single/Multiple Delete operation is not working
- 10:36 AM Bug #14912 (Closed): Inspection Sampling Plan : Single/Multiple Delete operation is not working
- Inspection Sampling Plan : Single/Multiple Delete operation is not working
- 02:39 PM Bug #14911 (Open): Inspection Sampling Plan : Search by supplier not working
- 10:34 AM Bug #14911 (Closed): Inspection Sampling Plan : Search by supplier not working
- Inspection Sampling Plan : Search by supplier not working
- 02:39 PM Bug #14910 (Open): Target PPM menu name is not displaying in group rights
- 10:13 AM Bug #14910 (Closed): Target PPM menu name is not displaying in group rights
- Target PPM menu name is not displaying in group rights
- 02:39 PM Bug #14909 (Open): Target PPM : Getting server error on clicking the menu
- 10:08 AM Bug #14909 (Closed): Target PPM : Getting server error on clicking the menu
- Target PPM : Getting server error on clicking the menu
- 02:39 PM Bug #14908 (Open): Risk page showing error
- 02:39 PM Bug #14907 (Open): In DocPro created user is not added in the Everyone group.
- 02:39 PM Bug #14906 (Open): Design VDA - Structure Analysis - System allows to Drag Focus element and Drop(Move) on External element. While doing this scenario, Diagram and Level number collapses randomly.
- 02:39 PM Bug #14905 (Open): clicking on Export button in the view log no response and in View log - it is allowing to select the "To date" less than the "From Date".
- 02:39 PM Bug #14904 (Open): Replace the audit status legends in the part details - Supplier Management
- 02:37 PM Suggestion #14927 (Open): Email: Need spare part usage email for Planned Maintenance and Brekadown WO
- Email: Need spare part usage email for Planned Maintenance and Brekadown WO
11/13/2019
- 08:11 PM Bug #14877 (Resolved): Main2: PFMEA, Potential Causes of Failure Column is not working displaying JS Error (Without Multi-Select)
- Fixed and patches applied on 47 Server
- 05:55 PM Bug #14877 (Open): Main2: PFMEA, Potential Causes of Failure Column is not working displaying JS Error (Without Multi-Select)
- 10:34 AM Bug #14877 (Closed): Main2: PFMEA, Potential Causes of Failure Column is not working displaying JS Error (Without Multi-Select)
- In Main2, the Potential Causes of Failure Column are not working displaying JS Error as
"Line: 155
Error: Object... - 08:11 PM Bug #14876 (Resolved): Customize Email Messages: Remainder Email is repeating for more than 1 time
- Fixed and patches applied on 47 Server
- 05:55 PM Bug #14876 (Open): Customize Email Messages: Remainder Email is repeating for more than 1 time
- 10:26 AM Bug #14876 (Closed): Customize Email Messages: Remainder Email is repeating for more than 1 time
- In the Customize Email Messages its repeating the Remainder Email Breadcrumb more than 1 time and the content of the ...
- 06:17 PM Bug #14908 (Closed): Risk page showing error
- 06:15 PM Bug #14907 (Closed): In DocPro created user is not added in the Everyone group.
- In DocPro created user is not added in the Everyone group.
- 06:13 PM Bug #14906 (Closed): Design VDA - Structure Analysis - System allows to Drag Focus element and Drop(Move) on External element. While doing this scenario, Diagram and Level number collapses randomly.
- System allows to Drag Focus element and Drop(Move) on External element. While doing this scenario, Diagram and Level...
- 06:13 PM Bug #14905 (Closed): clicking on Export button in the view log no response and in View log - it is allowing to select the "To date" less than the "From Date".
- 06:00 PM Bug #14904 (Closed): Replace the audit status legends in the part details - Supplier Management
- 1)Replace the audit status legends in the part details - Supplier Management
2)Clicking on Part number count should ... - 05:56 PM Bug #14902 (Open): TSR - ASIL value is not centre aligned and Bold in TSR document
- 05:48 PM Bug #14902 (Closed): TSR - ASIL value is not centre aligned and Bold in TSR document
- ASIL value is not centre aligned in TSR document. Also it can be in Bold font.
- 05:55 PM Bug #14900 (Open): Design VDA - Block Diagram - Focus element name is not displayed in VDA Block Diagram
- 05:38 PM Bug #14900 (Closed): Design VDA - Block Diagram - Focus element name is not displayed in VDA Block Diagram
- Focus element name is not displayed in VDA Block Diagram. It is working in FST
- 05:55 PM Bug #14899 (Open): Operational Situation - Add exposure by pressing enter key is displaying alert message.(Refer Description)
- 05:32 PM Bug #14899 (Closed): Operational Situation - Add exposure by pressing enter key is displaying alert message.(Refer Description)
- Add exposure by pressing enter key is displaying alert message. Also Description for the Exposure is displayed. After...
- 05:55 PM Bug #14898 (Open): Block Diagram: when connecting interface line from internal Child to external child element connection type is not working
- 05:23 PM Bug #14898 (Closed): Block Diagram: when connecting interface line from internal Child to external child element connection type is not working
- Block Diagram: when connecting interface line from internal Child to external child element connection type is not wo...
- 05:55 PM Bug #14897 (Open): BOM is not converted as Item element
- 05:08 PM Bug #14897 (Closed): BOM is not converted as Item element
- BOM is not converted as Item element
Refer screenshot - 05:55 PM Bug #14894 (Open): When pressing enter key in Exposure Value "There is no option to add exposure" pop up window is displayed unwantedly
- 04:18 PM Bug #14894 (Closed): When pressing enter key in Exposure Value "There is no option to add exposure" pop up window is displayed unwantedly
- When pressing enter key in Exposure Value "There is no option to add exposure" pop up window is displayed unwantedly
- 05:55 PM Bug #14893 (Open): Block Diagram - Focus element name is not visible in dark theme.
- 04:06 PM Bug #14893 (Closed): Block Diagram - Focus element name is not visible in dark theme.
- Focus element name is not visible in dark theme. Also can be more attractive/Bold
- 05:55 PM Bug #14892 (Open): Main2: DFMEA, Potential Causes of Failure Column is not working (Without Multi-Select)
- 03:45 PM Bug #14892 (Closed): Main2: DFMEA, Potential Causes of Failure Column is not working (Without Multi-Select)
- In Main2, DFMEA the Potential Causes of Failure Column are not working and its creating a New empty branch
- 05:55 PM Bug #14890 (Open): Main2: D/PFMEA, Effects Column is not working as expected (Without Multi-Select Option)
- 12:48 PM Bug #14890 (Closed): Main2: D/PFMEA, Effects Column is not working as expected (Without Multi-Select Option)
- In Main2, In the Effects Column for the given Effect and the Severity Value is not added/updated after clicking on th...
- 05:55 PM Bug #14889 (Open): Main2: D/PFMEA Recommended Actions Column is not working (Without Multi-Select Option)
- 12:39 PM Bug #14889 (Closed): Main2: D/PFMEA Recommended Actions Column is not working (Without Multi-Select Option)
- In Main2, When the User tries to Update the New Recommended Actions in the Recommended Actions Column its not Updatin...
- 05:55 PM Bug #14888 (Open): Document Publish: Publish is not working
- 12:31 PM Bug #14888 (Closed): Document Publish: Publish is not working
- AQuAPro Document Publish is not working. When the User tries to Publish a Document its displaying an Unwanted Message...
- 05:55 PM Bug #14887 (Open): Supplier Management: Unable to add parts in supplier creation page.
- 11:29 AM Bug #14887 (Closed): Supplier Management: Unable to add parts in supplier creation page.
- Unable to add parts in supplier creation page.
- 05:55 PM Bug #14886 (Open): Supplier Management: Audit topic field is missing while creating checklists
- 11:28 AM Bug #14886 (Closed): Supplier Management: Audit topic field is missing while creating checklists
- Supplier Management: Audit topic field is missing while creating checklists
- 05:55 PM Bug #14885 (Open): Supplier Management: Score not able to set for section/Checklists/Checkpoint.Specified score not getting saved
- 11:26 AM Bug #14885 (Closed): Supplier Management: Score not able to set for section/Checklists/Checkpoint.Specified score not getting saved
- Score not able to set for section/Checklists/Checkpoint.Specified score not getting saved
- 05:55 PM Bug #14884 (Open): Supplier Management:There is no Q_type while creating checklists->Section,Subsection,Checklists,checkpoint.Q_type is displaying only after setting up score
- 11:23 AM Bug #14884 (Closed): Supplier Management:There is no Q_type while creating checklists->Section,Subsection,Checklists,checkpoint.Q_type is displaying only after setting up score
- Supplier Management:There is no Q_type while creating checklists->Section,Subsection,Checklists,checkpoint.Q_type is ...
- 05:55 PM Bug #14883 (Open): Supplier Management: Session expired after importing checklists and refreshed the EWQIMS application
- 11:17 AM Bug #14883 (Closed): Supplier Management: Session expired after importing checklists and refreshed the EWQIMS application
- Supplier Management: Session expired after importing checklists and refreshed the EWQIMS application
- 05:55 PM Bug #14882 (Open): Supplier Management:Score Settings->Unable to specify same score status (approved/Conditionaly Approved/Rejected) for different supplier template
- 11:15 AM Bug #14882 (Closed): Supplier Management:Score Settings->Unable to specify same score status (approved/Conditionaly Approved/Rejected) for different supplier template
- Score Settings->Unable to specify same score status (approved/Conditionaly Approved/Rejected) for different supplier ...
- 05:55 PM Bug #14881 (Open): Supplier Management:Score settings->If color based is chosen why it is mandatory to fill score values
- 11:13 AM Bug #14881 (Closed): Supplier Management:Score settings->If color based is chosen why it is mandatory to fill score values
- Score settings->If color based is chosen why it is mandatory to fill score values
- 05:55 PM Bug #14880 (Open): Supplier Management: Score settings->If supplier template not specified there is no validation alert on saving
- 11:10 AM Bug #14880 (Closed): Supplier Management: Score settings->If supplier template not specified there is no validation alert on saving
- Score settings->If supplier template not specified there is no validation alert on saving
- 05:55 PM Bug #14879 (Open): Supplier Management:Label missing in Risk level creation.pls refer screen shot
- 11:09 AM Bug #14879 (Closed): Supplier Management:Label missing in Risk level creation.pls refer screen shot
- Supplier Management:Label missing in Risk level creation.pls refer screen shot
- 05:55 PM Bug #14878 (Open): Supplier Management:Empty alert upon saving levels in suite in addition with saved successfully alert
- 11:06 AM Bug #14878 (Closed): Supplier Management:Empty alert upon saving levels in suite in addition with saved successfully alert
- Supplier Management:Empty alert upon saving levels in suite in addition with saved successfully alert
11/07/2019
- 02:51 PM Bug #14812 (Open): Production Scheduling : Wrong alert displayed on clicking save button
- 02:51 PM Bug #14800 (Open): Receiving Inspection : Reaction Plan not getting created
11/04/2019
- 05:44 PM Bug #14838 (Open): Supplier Management: Alignment issue in all view log screen.No expand option to view full description.refer screen shot
- 05:05 PM Bug #14838 (Closed): Supplier Management: Alignment issue in all view log screen.No expand option to view full description.refer screen shot
- Supplier Management: Alignment issue in all view log screen.No expand option to view full description.refer screen shot
11/01/2019
- 05:51 PM Bug #14812 (Closed): Production Scheduling : Wrong alert displayed on clicking save button
- Production Scheduling : Wrong alert displayed on clicking save button
- 02:59 PM Bug #14800 (Closed): Receiving Inspection : Reaction Plan not getting created
- Receiving Inspection : Reaction Plan not getting created
Also available in: Atom