Activity
From 11/01/2019 to 11/30/2019
11/29/2019
- 11:56 AM Bug #14628 (Closed): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- Closed in Cycle 4
- 11:15 AM Bug #14628 (Not Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 11:15 AM Bug #14628: Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- • Assign Severity rating is not displayed for Direct Effect.
- 11:27 AM Bug #14843 (Closed): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- Closed in SP920 Cycle 4
- 11:26 AM Bug #14827 (Closed): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 11:24 AM Bug #14576 (Closed): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- Closed in SP920 Cycle 4
- 11:21 AM Bug #14579 (Closed): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- Closed in SP920 Cycle 4
- 11:19 AM Bug #14585 (Closed): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- Closed in SP920 cycle 4
- 11:18 AM Bug #14623 (Closed): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- Closed in SP920 Cycle 4.
Requirement Tree/Failure Tree/EFC Tree options are removed in both Functional/Failure Ana... - 11:13 AM Bug #14726 (Closed): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- Closed in SP920 Cycle 4
- 11:11 AM Bug #14841 (Closed): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- Closed in SP920 Cycle 4
11/27/2019
11/25/2019
- 04:54 PM Bug #14628 (Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 03:32 PM Bug #14628 (Not Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 03:51 PM Bug #14726 (Fixed with Hotfix): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- 03:27 PM Bug #14726: Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- Edit Effect page is still not same as Design VDA
- 03:49 PM Bug #14320 (Fixed with Hotfix): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 03:47 PM Bug #14576 (Fixed with Hotfix): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:24 PM Bug #14576 (Resolved): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 03:40 PM Bug #14579 (Fixed with Hotfix): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 03:38 PM Bug #14585 (Fixed with Hotfix): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 03:36 PM Bug #14603 (Closed): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- Closed in SP920 Cycle 2
- 03:34 PM Bug #14623 (Not Resolved): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 10:05 AM Bug #14318 (Closed): While opening the inspection sheet from Supervisor approval menu,Hourly reminder email is getting triggered
- Closed in SP920
- 10:05 AM Bug #14318 (Fixed with Hotfix): While opening the inspection sheet from Supervisor approval menu,Hourly reminder email is getting triggered
- 10:04 AM Bug #14219 (Closed): Production Inprocess & Dept Worksheet : After clicking search on Operations/Equipments pop-up respective images are getting changed
- Closed in SP920
- 10:04 AM Bug #14219 (Fixed with Hotfix): Production Inprocess & Dept Worksheet : After clicking search on Operations/Equipments pop-up respective images are getting changed
- 10:04 AM Bug #14211 (Closed): If an Inspection is Inprogress its allowing to create a new schedule for Receiving Inspection but not allowing for Final Inspection.Need a common rule set for both the Inspections
- Closed in SP920
- 10:04 AM Bug #14211 (Fixed with Hotfix): If an Inspection is Inprogress its allowing to create a new schedule for Receiving Inspection but not allowing for Final Inspection.Need a common rule set for both the Inspections
- 10:03 AM Bug #14209 (Closed): Inspection form Standard : Search by Notification interval not working
- Closed in SP920
- 10:03 AM Bug #14209 (Fixed with Hotfix): Inspection form Standard : Search by Notification interval not working
11/22/2019
- 12:36 PM Bug #14579 (Resolved): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 12:36 PM Bug #14623 (Resolved): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 12:35 PM Bug #14628 (Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
11/21/2019
- 06:38 PM Bug #14603 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 01:12 PM Bug #14726 (Resolved): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- 01:10 PM Bug #14585 (Resolved): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 01:09 PM Bug #14320 (Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
11/13/2019
- 06:40 PM Bug #14870 (Closed): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
- closed in Cy 9
- 02:54 PM Bug #14870 (Resolved): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
11/12/2019
- 06:13 PM Bug #14872 (Closed): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- 06:13 PM Bug #14872 (Fixed with Hotfix): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- not replicated
- 05:42 PM Bug #14872 (Open): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- 01:04 PM Bug #14872 (Closed): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloa...
- 05:42 PM Bug #14870 (Open): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
- 11:54 AM Bug #14870 (Closed): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
- PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflec...
- 05:28 PM Bug #14860 (Closed): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- 11:48 AM Bug #14860 (Resolved): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- 11:39 AM Bug #14860 (Open): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- 05:28 PM Bug #14837 (Closed): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- 05:27 PM Bug #14859 (Closed): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 11:48 AM Bug #14859 (Resolved): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 11:39 AM Bug #14859 (Open): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 03:49 PM Bug #14533 (Closed): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 12:32 PM Bug #14533 (Reopen): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 12:54 PM Bug #14750 (Not Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Still Not able to attach docpro document in meetings by selecting revision document from custom /user defined folder(...
- 12:01 PM Bug #14655 (Resolved): Clicking on the attachments added in forms, shows 500 server error.
11/11/2019
- 06:14 PM Bug #14699 (Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 05:32 PM Bug #14852 (Resolved): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- 04:55 PM Bug #14841 (Fixed with Hotfix): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 11:04 AM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 12:59 PM Bug #14750 (Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- 11:44 AM Bug #14843 (Fixed with Hotfix): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 11:04 AM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 10:03 AM Bug #14837 (Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
11/07/2019
- 05:11 PM Bug #14846: Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Published the ECR form - But document not yet converted
- 03:42 PM Bug #14750 (Not Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- The selected document is not attached to the meeting attachments(attach from Docpro)
- 03:42 PM Bug #14816 (Closed): MR approval is not working after validation and verification completed
- Verified in SP_915 Cy-6 verified MR approval work flow
- 03:41 PM Bug #14828 (Closed): NC category:Irrelevant Nc category is display while raised NC .
- Verified in SP_915 Cy-6
- 03:40 PM Bug #14824 (Closed): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- Verified in CY-6 and Closed
- 03:37 PM Bug #14699 (Not Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 03:30 PM Bug #14841 (In Progress): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:17 PM Bug #14841 (Not Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 10:33 AM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:29 PM Bug #14843 (In Progress): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 03:11 PM Bug #14843 (Not Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- Issue remains the same
- 10:47 AM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 03:19 PM Bug #14856 (Closed): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 10:49 AM Bug #14856 (Resolved): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 10:48 AM Bug #14856 (Open): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 03:03 PM Bug #14517 (Closed): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Working fine
- 03:03 PM Bug #14831 (Closed): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- Working fine
- 03:03 PM Bug #14675 (Closed): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- Working fine
- 02:49 PM Bug #14860: Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- Please let me know the root cause to replicate the issue
- 02:46 PM Bug #14860 (Closed): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- Multi document upload: When uploading multiple docs twice, then when trying to open the latest uploaded document, sho...
- 01:09 PM Bug #14859 (Closed): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 12:35 PM Bug #14418 (Not Resolved): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- Still parts are listing twice after BOM Import. Refer screenshot(duplicate Part)
- 12:29 PM Bug #14480 (Closed): Dont display Supplier in any of the user selection part.
- 12:28 PM Bug #14658 (Closed): Supplier part number is not getting displayed in SCAR form.
- 10:38 AM Bug #14850 (Open): Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error alert is displaying
- Duplicate of #14852
- 10:36 AM Bug #14852 (Open): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- Fixed By sakthi murugan
11/06/2019
- 06:33 PM Bug #14312 (Closed): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 06:25 PM Bug #14591 (Closed): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 06:21 PM Bug #14833 (Closed): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 06:14 PM Bug #14832 (Closed): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 06:13 PM Bug #14835 (Closed): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 06:11 PM Bug #14841 (Not Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 06:06 PM Bug #14842 (Closed): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- Closed in SP915 Cycle 6
- 05:23 PM Bug #14670 (Closed): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 05:23 PM Bug #14721 (Closed): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 05:16 PM Bug #14843 (Not Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 02:30 PM Bug #14810 (Closed): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 02:21 PM Bug #14856 (Closed): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- Popup size is too small where the list is not displayed properly
- 01:46 PM Bug #14852 (Closed): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok...
- 01:14 PM Feature/Enhancement #14741: IE:User popup: when closing the popup before the page loads, throws JS error
- As per Bijoy Request this issue is moving to next Release
- 01:14 PM Feature/Enhancement #14385: User log->when session is expired system is not considering the logout time
- As per Bijoy request this issue is moving to next release
- 01:03 PM Bug #14539 (Closed): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 12:22 PM Bug #14850 (Fixed with Hotfix): Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error alert is displaying
- Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error al...
- 12:12 PM Bug #14805 (Closed): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 12:12 PM Bug #14687 (Closed): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 12:11 PM Bug #14834 (Closed): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 11:57 AM Bug #14837 (Not Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- Alert displaying - The Max length of revision number is 33
- 11:37 AM Bug #14737 (Closed): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 11:32 AM Bug #14839 (Closed): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 11:28 AM Bug #14845 (Closed): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 11:26 AM Bug #14847 (Closed): TOC: Search by document number with prefix is not working
11/05/2019
- 10:09 PM Bug #14655 (In Progress): Clicking on the attachments added in forms, shows 500 server error.
- Not able to find the root cause
- 10:08 PM Bug #14750 (Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Revision number Encoded from Docpro have to decode by All modules
- 09:02 PM Bug #14699 (Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 08:12 PM Feature/Enhancement #14413 (Open): Supplier portal module should be display in social media
- Discuss with sabu and bijoy moving to the next release
- 08:10 PM Bug #14591 (Resolved): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 07:58 PM Bug #14658 (Resolved): Supplier part number is not getting displayed in SCAR form.
- 07:50 PM Bug #14834 (Resolved): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 11:07 AM Bug #14834 (In Progress): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 07:50 PM Bug #14687 (Resolved): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 11:07 AM Bug #14687 (In Progress): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 07:48 PM Bug #14839 (Resolved): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 07:42 PM Bug #14675 (Resolved): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- 07:42 PM Bug #14742 (Resolved): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 02:08 PM Bug #14742 (Not Fixed with Hotfix): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- Cycle 5:Still issue occur in Auditee response in nxP DB
- 06:54 PM Bug #14845 (Resolved): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 03:56 PM Bug #14845 (Open): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 03:55 PM Bug #14845 (Closed): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a s...
- 06:32 PM Bug #14670 (Resolved): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 06:32 PM Bug #14721 (Resolved): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 05:24 PM Bug #14701 (Fixed with Hotfix): Auditee Response: Delete option need to remove in Evidence column
- Verified in cycle 5
- 03:11 PM Bug #14701 (Resolved): Auditee Response: Delete option need to remove in Evidence column
- 05:22 PM Bug #14837 (Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- 05:16 PM Bug #14734 (Closed): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 05:14 PM Bug #14846 (Resolved): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Not able to replicate
- 04:22 PM Bug #14846 (Open): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- 04:05 PM Bug #14846 (Closed): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Not able to attach the document itself in the ECR form when batch process is enabled - Approval is set to the Docpro ...
- 05:11 PM Bug #14847 (Resolved): TOC: Search by document number with prefix is not working
- 05:03 PM Bug #14847 (Open): TOC: Search by document number with prefix is not working
- 04:34 PM Bug #14847 (Closed): TOC: Search by document number with prefix is not working
- TOC: Search by document number with prefix is not working
- 04:54 PM Bug #14762 (Closed): Change working time is not saving- Showing Failed message
- 04:39 PM Bug #14762 (Resolved): Change working time is not saving- Showing Failed message
- 04:51 PM Bug #14737 (Resolved): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 11:44 AM Bug #14737 (Not Resolved): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 04:31 PM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 04:00 PM Bug #14843 (Open): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 02:24 PM Bug #14843 (Closed): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- • Alert must be interchanged. Issue occurs for Below also.
• System allows to drag Focus element and while drop on... - 04:31 PM Bug #14842 (Resolved): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- 03:57 PM Bug #14842 (Open): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- 01:07 PM Bug #14842 (Closed): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- While copying the Element that contains more than one child element, on same level element, diagram is displayed rand...
- 04:31 PM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:56 PM Bug #14841 (Open): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 12:48 PM Bug #14841 (Closed): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- • After minimising the level, page number remains in the same maximum as earlier structure.
• While collapsing fr... - 04:01 PM Bug #14571 (Closed): Document is not revised when change request is initiated from Change Management for Bulk Change Request.
- Not able to attach the document itself in the ECR form when batch process is enabled - and Approval is set to the Doc...
- 03:32 PM Bug #14771 (Closed): Change Management : Document not going for approval even though route is set for the level
- Closed in CY5
- 03:00 PM Bug #14773 (Closed): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- 02:48 PM Bug #14366 (Closed): When the document name contains special character then selecting the document for the change request - No Response
- 02:41 PM Bug #14716 (Closed): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- 02:36 PM Bug #14715 (Closed): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- 02:15 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 02:15 PM Bug #14810 (Resolved): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 11:07 AM Bug #14810 (In Progress): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 02:10 PM Bug #14698 (Closed): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- Fixed
- 02:09 PM Bug #14747 (Closed): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- closed
- 02:07 PM Bug #14466 (Closed): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Verified in cycle5
- 02:07 PM Bug #14814 (Closed): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Verified
- 01:59 PM Bug #14625 (Closed): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 01:58 PM Bug #14827 (Resolved): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 01:00 PM Bug #14827 (Not Resolved): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- Refer Screenshot
- 01:56 PM Bug #14805 (Resolved): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 01:03 PM Bug #14480 (Resolved): Dont display Supplier in any of the user selection part.
- 01:01 PM Bug #14763 (Closed): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 12:41 PM Bug #14836 (Closed): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- 12:03 PM Bug #14761 (Fixed with Hotfix): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 11:53 AM Bug #14517 (Resolved): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- 11:41 AM Bug #14640 (Closed): While clicking on the supplier link from social media page the part details are showing error page.
- Fixed in the build
- 10:40 AM Bug #14640 (Resolved): While clicking on the supplier link from social media page the part details are showing error page.
- 11:40 AM Bug #14697 (Closed): Primary contact person is not added automatically for one supplier(00MagnaCosma)
- Issue closed
- 11:39 AM Bug #14826 (Fixed with Hotfix): Multi site not listing in the dropdown for APQP
- Issue fixed
- 10:11 AM Bug #14825 (Fixed with Hotfix): Group name edit is not working when tried to edit displays some invalid alert for the action done
- 10:05 AM Bug #14829 (Closed): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- Working fine after setting up business rules
- 10:04 AM Bug #14830 (Closed): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
11/04/2019
- 10:57 PM Bug #14824 (Resolved): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- 01:22 PM Bug #14824 (Open): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- 11:27 AM Bug #14824 (Closed): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- 10:57 PM Bug #14825 (Resolved): Group name edit is not working when tried to edit displays some invalid alert for the action done
- 01:22 PM Bug #14825 (Open): Group name edit is not working when tried to edit displays some invalid alert for the action done
- 11:30 AM Bug #14825 (Fixed with Hotfix): Group name edit is not working when tried to edit displays some invalid alert for the action done
- Group name edit is not working when tried to edit displays some invalid alert for the action done
- 10:56 PM Bug #14826 (Resolved): Multi site not listing in the dropdown for APQP
- 01:22 PM Bug #14826 (Open): Multi site not listing in the dropdown for APQP
- 12:09 PM Bug #14826 (Closed): Multi site not listing in the dropdown for APQP
- 1. After giving APQP module rights to Multiple sites Only corporate is showing up in the dropdown
2. If the rights s... - 09:57 PM Bug #14828 (Resolved): NC category:Irrelevant Nc category is display while raised NC .
- 06:56 PM Bug #14828 (Open): NC category:Irrelevant Nc category is display while raised NC .
- 01:54 PM Bug #14828 (Closed): NC category:Irrelevant Nc category is display while raised NC .
- NC category:Irrelevant Nc category is display while raised NC .
- 09:57 PM Bug #14829 (Resolved): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- 02:41 PM Bug #14829 (Open): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- AS discussed Not an issue
- 02:19 PM Bug #14829 (Closed): Supplier Management: VAM audit-Perform audit->Submit to auditee button is missing
- 09:56 PM Bug #14831 (Resolved): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- 06:56 PM Bug #14831 (Open): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- 03:36 PM Bug #14831 (Closed): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so whi...
- 09:56 PM Bug #14517 (In Progress): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- 02:15 PM Bug #14517: "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- After uploading checklists also same "Please fill business rules settings" is getting displayed
- 02:12 PM Bug #14517: "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Able to replicate in corporate site also in CY-5
- 02:11 PM Bug #14517 (Reopen): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Replicated in Cy-5
- 09:55 PM Bug #14816 (Resolved): MR approval is not working after validation and verification completed
- 05:06 PM Bug #14816 (Not Resolved): MR approval is not working after validation and verification completed
- Data not saved error message displayed when clicking on save button in close out page
- 09:55 PM Bug #14761 (Resolved): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 05:07 PM Bug #14761 (Not Resolved): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- 09:31 PM Bug #14655: Clicking on the attachments added in forms, shows 500 server error.
- Reproduced in Roopa's machine. Happens in few QA machine too.
- 11:32 AM Bug #14655 (Not Resolved): Clicking on the attachments added in forms, shows 500 server error.
- 07:42 PM Bug #14827 (Resolved): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 01:22 PM Bug #14827 (Open): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 01:13 PM Bug #14827 (Closed): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and repu...
- 07:18 PM Bug #14713 (Closed): Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying declaration details(user name and job title)
- 07:18 PM Bug #14712 (Closed): IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
- 07:03 PM Bug #14436 (Closed): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 07:03 PM Bug #14832 (Resolved): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 06:56 PM Bug #14832 (Open): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 03:38 PM Bug #14832 (Closed): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- • After collapsing the subsystem element in Collapsed form and again expanding it displays arrow . While clicking on ...
- 07:03 PM Bug #14833 (Resolved): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 04:48 PM Bug #14833 (Open): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 03:46 PM Bug #14833 (Closed): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- Tooltip for Legend Icon is displayed in two different forms. - This issue occurs in all the Browsers
- 06:57 PM Bug #14839 (Open): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 05:10 PM Bug #14839 (Closed): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowi...
- 06:57 PM Bug #14837 (Open): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- 05:03 PM Bug #14837 (Closed): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" ins...
- 06:57 PM Bug #14834 (Open): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 03:48 PM Bug #14834 (Closed): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- Block Diagram: When assigning values in Show item boundaries and check Enable Automate diagram, the external element ...
- 06:11 PM Bug #14698 (Fixed with Hotfix): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- Verified in cycle5
- 06:09 PM Bug #14742 (Fixed with Hotfix): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- Verified in cycle 5
- 06:08 PM Bug #14747 (Fixed with Hotfix): NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- 06:08 PM Bug #14747: NXP-> Auditor close out: Effectiveness due date should not display still Verified and Validation as "Yes" after that effectiveness details should be displayed
- Verified in cycle4
- 06:08 PM Bug #14814 (Fixed with Hotfix): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 06:05 PM Bug #14814: Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Verified in Cycle5
- 06:06 PM Bug #14466 (Fixed with Hotfix): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- 06:05 PM Bug #14466: Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Verified in cycle4
- 06:04 PM Bug #14815 (Fixed with Hotfix): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- Verified in cycle5
- 05:46 PM Bug #14312 (Resolved): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 05:24 PM Bug #14727 (Closed): Effectiveness Closeout reminder created in "Effectiveness CloseOut" in notification setup->Business rules is not displaying against the created One
- Verified in SP_916 CY-5
- 05:23 PM Bug #14751 (Closed): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- Issue verified in SP_916 CY-6
- 05:22 PM Bug #14734 (Resolved): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 05:16 PM Bug #14539 (In Progress): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 02:39 PM Bug #14539 (Not Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- Refer Screen Shot
- 05:14 PM Bug #14836 (Resolved): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- This is not an issue (working as per functionality)
- 05:13 PM Bug #14836 (Open): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- 04:01 PM Bug #14836 (Closed): When Assigning connection line and pattern value from one element to another and remove the element, then add the same element to block diagram the system display the diagram with no connection
- When Assigning connection line and pattern value from one element to another and remove the element using Add/Remove ...
- 05:13 PM Bug #14704 (Closed): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- 05:11 PM Bug #14756 (Closed): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- Verified in Sp_915 CY-5
- 05:11 PM Bug #14770 (Closed): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- Verified in Sp_915 CY-5
- 05:10 PM Bug #14749 (Closed): LPA : Add audit activities is not displaying the latest mapped process
- Verified in Sp_915 CY-5
- 05:10 PM Bug #14561 (Closed): LPA : Cause and Sub cause is mandatory according to business rules is not working for LPA audits
- Verified in Sp_915 CY-5
- 05:09 PM Bug #14530 (Closed): LPA : Equipment selection does not display Created manufacturing line in Production line LPA scheduling screen
- Verified in Sp_915 CY-5
- 05:09 PM Bug #14748 (Closed): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- 05:07 PM Bug #14690 (Closed): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- 02:47 PM Bug #14690 (Resolved): The Indicators are not displayed in Flow Indicator details for all Tree diagrams and in VOC
- 05:06 PM Bug #14802 (Closed): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- 05:06 PM Bug #14813 (Closed): Process/Activities : Site option is missing in process/activities
- Agree with dev team.
- 05:04 PM Bug #14685 (Closed): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- 05:04 PM Bug #14835 (Resolved): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 04:20 PM Bug #14835 (Open): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 03:51 PM Bug #14835 (Closed): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 05:03 PM Bug #14688 (Closed): HARA : Alignment is not proper in HARA Document
- 05:02 PM Bug #14688 (Resolved): HARA : Alignment is not proper in HARA Document
- 02:49 PM Bug #14688 (In Progress): HARA : Alignment is not proper in HARA Document
- 02:40 PM Bug #14688 (Open): HARA : Alignment is not proper in HARA Document
- 02:39 PM Bug #14688 (New): HARA : Alignment is not proper in HARA Document
- 02:38 PM Bug #14688 (Future Release): HARA : Alignment is not proper in HARA Document
- Very Important and Critical issues. Already informed to the dev team. Since the dev team needs to change interface it...
- 04:59 PM Bug #14677 (Closed): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 04:56 PM Bug #14705 (Closed): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- 04:55 PM Bug #14708 (Closed): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 04:54 PM Bug #14760 (Closed): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- 04:53 PM Bug #14764 (Closed): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- 04:50 PM Bug #14766 (Closed): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 04:48 PM Bug #14691 (Closed): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 04:47 PM Bug #14541 (Closed): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 04:39 PM Bug #14673 (Closed): Action:Document review:Document number link not showing the attached document, its showing some other document
- 04:27 PM Bug #14674 (Closed): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- Working fine hence closing this defect
- 04:07 PM Bug #14830 (Resolved): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- 04:07 PM Bug #14830 (Open): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- Close as per your comments
- 03:09 PM Bug #14830: Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- Working fine
- 03:05 PM Bug #14830 (Closed): Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- Supplier Management:Corrective action close out->History->Auditee response details is missing.pls refer screen shot
- 04:05 PM Bug #14592 (Closed): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:03 PM Bug #14678 (Closed): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 03:56 PM Bug #14803 (Closed): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- Closed in SP915 Cycle 5
- 03:55 PM Bug #14804 (Closed): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- Closed in SP915 Cycle 5
- 03:46 PM Bug #14692 (Closed): Revision history summary: When there are more revisions, by clicking on approval details header, error occurs in IE, page keeps on loading in chrome
- 03:24 PM Bug #14810: FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- Refer Screenshot
- 03:23 PM Bug #14810 (Not Resolved): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 03:23 PM Bug #14810 (Resolved): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 01:22 PM Bug #14810 (Open): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 03:20 PM Bug #14738 (Closed): Groups:Supplier users are listed in the groups
- 03:17 PM Bug #14672 (Closed): New Document Draft - On entering the Document number as - " !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~" the displays like "Unterminated string constant" in IE and the alert displays like "Invalid or unexpected token" in chrome
- 03:14 PM Bug #14387 (Closed): Suite: First name,middle name,last name separation is not valid
- Working fine.Hence closing this defect
- 03:13 PM Bug #14817 (Closed): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- Working fine.Hence closing this defect
- 03:13 PM Bug #14818 (Closed): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- 03:13 PM Bug #14818: Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- Working fine.Hence closing this defect
- 03:13 PM Bug #14819 (Closed): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- Working fine.Hence closing this defect
- 03:12 PM Bug #14820 (Closed): Supplier Management: Repeat audit not getting generated for VAM audit
- Working fine.Hence closing this defect
- 10:07 AM Bug #14820 (Resolved): Supplier Management: Repeat audit not getting generated for VAM audit
- 10:06 AM Bug #14820 (Open): Supplier Management: Repeat audit not getting generated for VAM audit
- Shift issue
- 03:12 PM Bug #14821 (Closed): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- Working fine.Hence closing this defect
- 03:12 PM Bug #14822 (Closed): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- Working fine.Hence closing this defect
- 03:11 PM Bug #14823 (Closed): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- Working fine
- 10:05 AM Bug #14823 (Resolved): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- 10:05 AM Bug #14823 (Open): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- Issue in integrated with docpro module
- 02:51 PM Bug #14739 (Closed): P-Diagram - Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
- 02:44 PM Bug #14696 (Closed): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 02:43 PM Bug #14695 (Closed): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 02:41 PM Bug #14480 (Not Resolved): Dont display Supplier in any of the user selection part.
- Still Supplier Users are getting displayed in Deploy Goals and objectives page user selection
- 02:31 PM Bug #14687 (Not Resolved): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 02:21 PM Bug #14723 (Closed): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- 02:20 PM Bug #14658 (Open): Supplier part number is not getting displayed in SCAR form.
- 02:19 PM Bug #14658 (TBD): Supplier part number is not getting displayed in SCAR form.
- 02:20 PM Bug #14744 (Closed): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 02:17 PM Bug #14669 (Closed): In Supplier page, Clicking on the the imported supplier name shows Server error.
- 01:30 PM Bug #14689 (Closed): TOC: When clicking on Training request, shows error(only when the document name has special characters like "Document G~!@#$%^&*()_+{}"|:?><")
- 01:22 PM Bug #14805 (Open): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 01:17 PM Bug #14728 (Closed): New document request: Should not allow the user to select the level and publish document when the site is not selected(same in Document relations screen)
- 01:16 PM Bug #14729 (Closed): Activity log not showing the log details when the document is moved and reset across/within sites and moved within sites
- 01:09 PM Bug #14693 (Closed): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- Closed in SP915 Cycle 5
- 01:04 PM Bug #14694 (Closed): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- Closed in SP915 Cycle 5
- 01:04 PM Bug #14717 (Closed): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- Closed in SP915 Cycle 5
- 01:03 PM Bug #14722 (Closed): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- Closed in SP915 Cycle 5
- 01:03 PM Bug #14724 (Closed): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- Closed in SP915 Cycle 5
- 12:57 PM Bug #14746 (Closed): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- Closed in SP915 Cycle 5
- 12:51 PM Bug #14765 (Closed): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- Closed in SP915 Cycle 5
- 12:50 PM Bug #14767 (Closed): Process VDA - Delete Characteristics is not working as expected
- Closed in SP915 Cycle 5
- 12:35 PM Bug #14799 (Closed): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- This issue is fixed so closing this issue on 04.11.2019
- 12:34 PM Bug #14773 (Yet to Verify): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- 12:32 PM Bug #14551 (Closed): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- This issue is fixed so closing this issue in cycle-5 on 04.11.2019
- 12:03 PM Bug #14772 (Closed): Trade: When clicking on trade menu, it showing with loading status
- Verified and closed this issue on cycle 5
- 11:59 AM Bug #14743 (Closed): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 11:58 AM Bug #14721 (Not Resolved): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- From Concern initial evaluation page, adding attachment and clicking on save has the same behavior
- 11:52 AM Bug #14676 (Closed): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- 11:41 AM Bug #14533 (Closed): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- Closed in Cycle5
- 11:40 AM Bug #14681 (Closed): Folder management->The rights for users is displayed No access even if the rights is inherited from Group which is Attach rights and View History
- Closed in Cycle5
- 11:26 AM Bug #14670 (Not Resolved): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 11:16 AM Bug #14400 (Closed): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
11/03/2019
- 05:03 PM Bug #14818 (Resolved): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- WAD
- 05:02 PM Bug #14818 (Open): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- Already other user assigned level for supplier . Find Screenshot
- 02:59 PM Bug #14818 (Closed): Supplier Management:Supplier management->Business rules->Level set up in audit pro is reflected in supplier management business rules level selection
- Supplier management->Business rules->Level set up in audit pro is reflectd in supplier management business rules leve...
- 04:07 PM Bug #14817 (Resolved): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- 04:07 PM Bug #14817 (Open): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- This issue is already in 9.1.2
- 02:58 PM Bug #14817 (Closed): Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- Supplier Management:Checklists->Section,Sub section,Checkpoints,Checklists->Duplication in Q_type(basic,conditional)
- 03:58 PM Bug #14819 (Resolved): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- 03:58 PM Bug #14819 (Open): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- Issue
- 03:00 PM Bug #14819 (Closed): VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to auditee
- VAM audit->Perform audit->After checklists filled and uploaded,export button not available before/after submit to aud...
- 03:51 PM Bug #14821 (Resolved): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- 03:51 PM Bug #14821 (Open): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- Not an issue. WAD
- 03:03 PM Bug #14821 (Closed): Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map entity screen(user is not listing)
- Supplier Management: Supplier->Default Supplier contact is not able to select as a auditee contact person in map enti...
- 03:39 PM Bug #14822 (Resolved): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- 03:38 PM Bug #14822 (Open): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- Not an issue.WAD
- 03:04 PM Bug #14822 (Closed): Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- Supplier Management: VEM->Quarterly audit mode-> Map segment->VEM follow up audit not getting generated
- 03:07 PM Bug #14823 (Closed): Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local machine)
- Supplier Management: audit form attachment -> Attach from local is not working(unable to attach a file from local mac...
- 03:05 PM Bug #14675 (Not Resolved): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- Able to replicate in CY-5
- 03:01 PM Bug #14820 (Closed): Supplier Management: Repeat audit not getting generated for VAM audit
- Supplier Management: Repeat audit not getting generated for VAM audit
- 12:08 PM Bug #14771 (Resolved): Change Management : Document not going for approval even though route is set for the level
- 12:08 PM Bug #14366 (Resolved): When the document name contains special character then selecting the document for the change request - No Response
- 12:08 PM Bug #14699: When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- There is an issue populating from Form service (Error in saving file in DB) even though change management sends an al...
11/02/2019
- 07:10 PM Bug #14815 (Resolved): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- Fixed for Effectiveness holiday calculation. Rest we don't have any changes
- 02:08 PM Bug #14815 (In Progress): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- 02:07 PM Bug #14815 (Open): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- 07:42 AM Bug #14815 (Closed): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- Audito/Auditee:Holiday should count during calculate the response target date,closed out date and effectiveness date
- 06:49 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 04:46 PM Bug #14592 (Not Fixed with Hotfix): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 02:23 PM Bug #14592 (Resolved): Structure Analysis: When clicking on level selector pagination the elements of diagram display randomly
- 06:49 PM Bug #14804 (Resolved): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- 06:49 PM Bug #14804 (Open): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- 06:41 PM Bug #14764 (Resolved): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- 06:41 PM Bug #14760 (Resolved): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- 06:41 PM Bug #14705 (Resolved): Tree Diagrams: All Tree Diagram contains large white space at the bottom of the Page
- 06:41 PM Bug #14704 (Resolved): Failure Tree Diagram: When Clicking on Extend/Intend Arrow in Failure Tree diagram it create duplicate elements each time when clicking the arrow.
- 06:38 PM Bug #14539 (Resolved): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 06:38 PM Bug #14687 (Resolved): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 06:38 PM Bug #14685 (Resolved): CIM: Add/Remove Elements and Select Context Element is not working in Combined Interface matrix
- 06:37 PM Bug #14723 (Resolved): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- 06:37 PM Bug #14744 (Resolved): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 06:01 PM Bug #14738 (Resolved): Groups:Supplier users are listed in the groups
- 06:00 PM Bug #14813 (Resolved): Process/Activities : Site option is missing in process/activities
- This is not an issue..Please check the "Is Process Site Specific" checkbox in Administrator settings page to show the...
- 05:41 PM Bug #14766 (Yet to Verify): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:40 PM Bug #14766 (Resolved): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:18 PM Bug #14766 (Not Fixed with Hotfix): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:24 PM Bug #14724 (Fixed with Hotfix): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 05:19 PM Bug #14767 (Yet to Verify): Process VDA - Delete Characteristics is not working as expected
- 05:17 PM Bug #14694 (Yet to Verify): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 05:14 PM Bug #14694 (Resolved): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 04:54 PM Bug #14694 (Not Fixed with Hotfix): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 05:16 PM Bug #14799 (Yet to Verify): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 05:15 PM Bug #14799 (Resolved): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 02:53 PM Bug #14799 (Not Fixed with Hotfix): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 05:01 PM Bug #14541 (Fixed with Hotfix): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 04:56 PM Bug #14691 (Fixed with Hotfix): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 04:55 PM Bug #14693 (Fixed with Hotfix): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 04:53 PM Bug #14722 (Fixed with Hotfix): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 04:53 PM Bug #14746 (Fixed with Hotfix): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 04:53 PM Bug #14765 (Fixed with Hotfix): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- 02:23 PM Bug #14765 (Resolved): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- 04:45 PM Bug #14814 (Resolved): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Refer the screen shot
- 02:07 PM Bug #14814 (In Progress): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 04:43 PM Bug #14678 (Fixed with Hotfix): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 04:39 PM Bug #14717 (Fixed with Hotfix): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 02:50 PM Bug #14803 (Fixed with Hotfix): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- 02:22 PM Bug #14803 (Resolved): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- 02:22 PM Bug #14803 (Open): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- 02:16 PM Bug #14655 (Resolved): Clicking on the attachments added in forms, shows 500 server error.
- Verified. Working as expected
- 02:08 PM Bug #14816 (Resolved): MR approval is not working after validation and verification completed
- 02:07 PM Bug #14816 (Open): MR approval is not working after validation and verification completed
- 09:11 AM Bug #14816 (Closed): MR approval is not working after validation and verification completed
- Bussiness Rule: MR approval is not working after validation and verification completed
- 02:07 PM Bug #14466 (Resolved): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- 08:02 AM Bug #14466 (Reopen): Corrective action close out->Non conformance details's->Submit button should be enable when the effectiveness is "NO" in Non conformance details's
- Still the issue occur in cycle 4.Reopening this issue
- 02:06 PM Bug #14698 (Resolved): Auditee Response: Evidence attachment it should allow to upload the file which has special character.
- 02:02 PM Bug #14742 (Resolved): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 11:29 AM Bug #14669 (Resolved): In Supplier page, Clicking on the the imported supplier name shows Server error.
- 11:28 AM Bug #14676 (Resolved): While Creating Nested Concerns in pop up, data in all drop down it is getting duplicated.(View Description)
- 11:28 AM Bug #14400 (Resolved): The close button in track project is getting hidden sometime and user cant able to close it using close icon.
- 09:22 AM Bug #14773 (Resolved): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
11/01/2019
- 08:43 PM Bug #14806 (Resolved): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- 05:40 PM Bug #14806 (Open): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- 04:59 PM Bug #14806 (Closed): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact perso...
- 08:43 PM Bug #14366: When the document name contains special character then selecting the document for the change request - No Response
- We have encoded the string and change management needs to decode the string. Docpro change done change management cod...
- 08:42 PM Bug #14813 (Open): Process/Activities : Site option is missing in process/activities
- 06:19 PM Bug #14813 (Closed): Process/Activities : Site option is missing in process/activities
- Process/Activities : Site option is missing in process/activities
- 08:42 PM Bug #14814 (Open): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 06:48 PM Bug #14814 (Closed): Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- Auditor-> Click to view report-> While click the view report data is not display in Template1,2
- 08:41 PM Bug #14751 (Resolved): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- 09:18 AM Bug #14751 (Open): LPA : Notification to Approver(s) after the audit report document terminated email "Auditor Upload Date" for OFI need to be renamed as "Approved Date"
- 08:41 PM Bug #14533 (Resolved): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 08:40 PM Bug #14625 (Resolved): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 06:15 PM Bug #14625 (Not Resolved): Batch Manager:Log details shows some error message which is not user friendly.(For both the status completed and Bulk Publish With Error)Label Bulk publish with error needs to be changed as Error when bulk publish
- 08:38 PM Bug #14655: Clicking on the attachments added in forms, shows 500 server error.
- Please provide details to replicate the issue
- 07:57 PM Bug #14695 (Resolved): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 06:16 PM Bug #14695 (Not Fixed with Hotfix): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- Still facing the same issue
- 09:51 AM Bug #14695 (Resolved): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 09:18 AM Bug #14695 (Open): Improper alert is getting displayed if no rating value is specified, only rating description has entered
- 07:57 PM Bug #14696 (Resolved): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 06:16 PM Bug #14696 (Not Fixed with Hotfix): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- It is not fixed in Training request from Doc Pro
- 01:15 PM Bug #14696 (Resolved): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 09:18 AM Bug #14696 (Open): New training request->Training required date->unable to open a calendar to pick a date (using esc button)
- 07:43 PM Bug #14799 (Resolved): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 03:02 PM Bug #14799 (Open): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- 02:36 PM Bug #14799 (Closed): Process VDA: Structure Analysis, JS Error occurring by doing the Right-Click activity in the displayed Arrow Connection
- In the Structure Analysis, by doing the Right-Click activity on the displayed Arrow Connection its displaying JS Erro...
- 06:52 PM Bug #14708 (Resolved): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 04:00 PM Bug #14708 (In Progress): Failure Tree Diagram: Indicator Details are hidden in Failure tree diagram
- 06:42 PM Bug #14717 (Resolved): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 03:35 PM Bug #14717 (In Progress): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 09:18 AM Bug #14717 (Open): Risk and Optimization - While click on one field, system focuses on the concurrent field also.
- 06:42 PM Bug #14767 (Resolved): Process VDA - Delete Characteristics is not working as expected
- 09:18 AM Bug #14767 (Open): Process VDA - Delete Characteristics is not working as expected
- 06:33 PM Bug #14750: Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Also for the attached documents from docpro the document name is showing "%20" instead of blank space -> Fixed.
- 09:18 AM Bug #14750 (Open): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- 06:16 PM Bug #14763 (Fixed with Hotfix): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 04:18 PM Bug #14763 (Resolved): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 09:18 AM Bug #14763 (Open): If the user tries to create training request from Doc Pro, if the Document name is having special character then the course name is not getting auto populated with document name.
- 06:07 PM Bug #14772 (Resolved): Trade: When clicking on trade menu, it showing with loading status
- 03:02 PM Bug #14772 (Open): Trade: When clicking on trade menu, it showing with loading status
- 11:34 AM Bug #14772 (Closed): Trade: When clicking on trade menu, it showing with loading status
- Trade: When clicking on trade menu, it showing with loading status.
The predefined status is not displayed - 05:56 PM Bug #14541 (Resolved): Process VDA -Failure Analysis - Edit Characteristics and Edit Failure is not working in Diagrammatic view context menu
- 05:55 PM Bug #14691 (Resolved): Process VDA - Functional Analysis - Edit Characteristics is not working.
- 05:55 PM Bug #14693 (Resolved): Process VDA - Functional Analysis - Delete characteristics is displaying JS error
- 05:55 PM Bug #14694 (Resolved): Process VDA - Failure Analysis - Context menu label for Delete Failure displays THL
- 05:54 PM Bug #14722 (Resolved): Process VDA - Functional/Failure Analysis - While clicking any item in LHS and RHS views, system removes the Topic segment from the header
- 05:53 PM Bug #14724 (Resolved): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 11:06 AM Bug #14724 (In Progress): (Multi Browser) - Mozilla - Context menu alignment for the following pages are not good.
- 05:52 PM Bug #14746 (Resolved): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 11:04 AM Bug #14746 (In Progress): (Multi Browser)Design VDA - Functional/Failure Analysis - Legend icon for Flow Down/Up Indicator is not good
- 05:42 PM Bug #14802 (Resolved): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- As per the discussion with QA, It's not an Issue
- 05:40 PM Bug #14802 (Open): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- 03:41 PM Bug #14802 (Closed): Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- Audit pro/LPA->Auditee Response->Effectiveness: Effectiveness details need to displayed for NC/OFI while history
- 05:41 PM Bug #14678 (Resolved): Design VDA: Function/Failure Analysis - Delete option is not working as expected.(Refer Description)
- 05:31 PM Bug #14810 (Closed): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- In FSR at top left corner when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
Re... - 05:29 PM Bug #14766 (Resolved): Process VDA - Delete Failure done for one Characteristics block is deleting the Failure in the other Characteristics block
- 05:22 PM Bug #14756 (Resolved): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- Not able to replicate checked with QA
- 09:18 AM Bug #14756 (Open): LPA : Though Auditee responded to NC in Auditor Login displays as "Auditee not yet responded" and Able to closeout NC
- 05:09 PM Bug #14551 (Fixed with Hotfix): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- 04:22 PM Bug #14551 (Resolved): IE & Chrome Main2: Key Controlled Movement for the Document Header is not working as expected
- Fixed and patches ready for hotfix testing
- 04:54 PM Bug #14365 (Closed): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 04:41 PM Bug #14365 (Resolved): Meetings:Alert need to be renamed as "Please specify from time " and "Please Specify to time"
- 04:19 PM Bug #14748 (Resolved): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- 09:18 AM Bug #14748 (Open): User Creation - "Saved Successfully" alert is not displayed while saving a user in following Scenario.(Refer Steps)
- 04:00 PM Bug #14686 (Closed): Supplier Management:Supplier Engagement and followup audit legend is not properly updated though VEM all audit has completed.It shows in progress alone not completed status(green color)
- unable to replicate.hence closing this defect
- 03:58 PM Bug #14805 (Closed): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- Search Option is not Working in Below document
>VOC
>Functional Analysis
>Hazard and Risk Analysis and
>TSR - 03:58 PM Bug #14804 (Closed): Design VDA- Structure Analysis - While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- While Collapsing the element that contains multiple child element and expanding again is not displayed properly.
- 03:50 PM Bug #14721 (Resolved): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 09:18 AM Bug #14721 (Open): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 03:45 PM Bug #14560 (Closed): PDF disable: When viewing the deleted document from actions, shows error
- closed in cy4
- 03:44 PM Bug #14803 (Closed): Design VDA - Structure Analysis - Arrow of the child element is not displayed while collapsing/Expanding parent in expanded form.(Refer Description)
- While collapsing the element which is already in expanded form and again expanding it, arrow is not displayed.
- 03:21 PM Bug #14764: EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- When two or more functions are added, the header is displayed for each function
- 09:18 AM Bug #14764 (Open): EFC Tree: Element is displayed isolated and the function/requirement displayed with no header
- 03:02 PM Bug #14771 (Open): Change Management : Document not going for approval even though route is set for the level
- 11:24 AM Bug #14771 (Closed): Change Management : Document not going for approval even though route is set for the level
- Change Management : Document not going for approval even though route is set for the level
Also current revision n... - 03:02 PM Bug #14773 (Open): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- 11:37 AM Bug #14773 (Closed): TOC:Print Icon in Revision history summary and print pdf context menu is not displayed for the supported file type and its displayed for PNG which is not a supported file type and when clicking on it shows error.(PFB the steps for more details)
- TOC: Revision history summary: Print Icon is not displayed for the supported file type. Print icon is displayed for P...
- 02:52 PM Bug #14383 (Closed): Search is not working in Widget settings either by using search window or else through search grid
- 02:51 PM Bug #14436 (Resolved): Findings Report ->Effectiveness Status and Effectiveness comments data is not displayed in Findings Reports.
- 02:44 PM Bug #14418 (Resolved): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- 01:20 PM Bug #14674 (Resolved): Supplier management:Server error while exporting VAM audit if supplier name contains & symbol
- 01:17 PM Bug #14558 (Closed): In Edge browser - ECR number is shown as link
- 01:08 PM Bug #14770 (Resolved): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- 01:07 PM Bug #14770 (Open): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- 10:15 AM Bug #14770 (Closed): LPA : Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully published"
- Publishing schedule is not working based on approval route selected in layer instead system displays as "Successfully...
- 12:11 PM Bug #14737 (Resolved): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 09:18 AM Bug #14737 (Open): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 12:10 PM Bug #14677 (Resolved): When entering the document revision number more than 15digits then session getting expired for all the users and document is not getting attached also.
- 11:17 AM Bug #14716 (Resolved): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- 09:18 AM Bug #14716 (Open): Change Management : When the change request is initiated from suite and publishing it from Change request status then the status is not changed to In Progress still it is showing Incomplete status.(This issue occurs when the approval is set)
- 11:17 AM Bug #14715 (Resolved): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- 09:18 AM Bug #14715 (Open): Change Management:When the ECR number for the change category is not assigned (default number is deleted) then in the ECR form the Default ECR numbering format is not displayed
- 10:49 AM Bug #14743 (Resolved): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 09:18 AM Bug #14743 (Open): From approach window if the user tries to interchange the approach, not shows the selected concern form link.
- 10:02 AM Bug #14480 (Resolved): Dont display Supplier in any of the user selection part.
- 09:55 AM Bug #14557 (Closed): After Rejecting the ECR form - it shows alert- Already rejected.
- 09:18 AM Bug #14765 (Open): Process VDA - Failure Analysis - While selecting Create and Map option from the LHS and mapping Characteristics/Effect/Failure/Cause, system does not respond. (Refer Description)
- 09:18 AM Bug #14762 (Open): Change working time is not saving- Showing Failed message
- 09:18 AM Bug #14760 (Open): While opening one tree diagram to another tree diagram using context menu the maximize button is not working
- 09:18 AM Bug #14744 (Open): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 09:18 AM Bug #14742 (Open): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 09:18 AM Feature/Enhancement #14741 (Open): IE:User popup: when closing the popup before the page loads, throws JS error
- 09:18 AM Bug #14739 (Open): P-Diagram - Diagram is displayed outside the scope and also the arrow Alignments are not proper in P-Diagram
- 09:18 AM Bug #14738 (Open): Groups:Supplier users are listed in the groups
- 09:18 AM Bug #14734 (Open): SB- In Product Checklist, clicking on the Comments icon shows server error. (Cascade Issue)
- 09:18 AM Bug #14726 (Open): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- 09:18 AM Bug #14723 (Open): Block Diagram: When assigning the values in Item Boundaries it duplicate the element in Automate block diagram
- 09:18 AM Feature/Enhancement #14720 (Open): The "customize email messages" and business rules in Supplier PPAP is not yet module specific
- 09:18 AM Bug #14713 (Open): Object reference error alert is getting displayed while publishing the IMS induction checklists after specifying declaration details(user name and job title)
- 09:18 AM Bug #14712 (Open): IMS induction checklists->Job title and department against with the user should be auto reflected once user is selected
Also available in: Atom