Activity
From 10/29/2023 to 11/27/2023
11/27/2023
- 11:31 PM Bug #26886 (Resolved): Requirements, Failures, and EFC Tree - After adding the Requirement or Failure Flow down, create a new BOM element in the BOM tree, the newly added element showing after the refresh.
- 11:30 PM Bug #26886 (Fixed in Dev): Requirements, Failures, and EFC Tree - After adding the Requirement or Failure Flow down, create a new BOM element in the BOM tree, the newly added element showing after the refresh.
- 08:48 AM Bug #26886 (Open): Requirements, Failures, and EFC Tree - After adding the Requirement or Failure Flow down, create a new BOM element in the BOM tree, the newly added element showing after the refresh.
- 08:09 PM Bug #26902 (Fixed in Dev): TSR Issues (Refer Description)
- 08:08 PM Bug #26902 (Open): TSR Issues (Refer Description)
- 07:14 PM Bug #26902 (Closed): TSR Issues (Refer Description)
1. The newly inserted branches are removed after refreshing. (Image 66)
2. After adding failure flow down in FTA, ...- 07:33 PM Bug #26889 (Closed): Process change request Form - Risk & Feasibility subform label issue
- 06:23 PM Bug #26889 (Resolved): Process change request Form - Risk & Feasibility subform label issue
- 08:48 AM Bug #26889 (Open): Process change request Form - Risk & Feasibility subform label issue
- 07:32 PM Bug #26891 (Closed): Process change request note form - Decision on stock section is editable , even after clicking not applicable check box
- 06:23 PM Bug #26891 (Resolved): Process change request note form - Decision on stock section is editable , even after clicking not applicable check box
- 08:48 AM Bug #26891 (Open): Process change request note form - Decision on stock section is editable , even after clicking not applicable check box
- 07:32 PM Bug #26893 (Closed): Validation subform - Label & check box alignment issue
- 06:23 PM Bug #26893 (Resolved): Validation subform - Label & check box alignment issue
- 08:48 AM Bug #26893 (Open): Validation subform - Label & check box alignment issue
- 07:29 PM Bug #26894 (Closed): Change Request status page - Able to delete " Full Access " , " View Access " , " CFT user Access " change request records in status page
- 06:23 PM Bug #26894 (Resolved): Change Request status page - Able to delete " Full Access " , " View Access " , " CFT user Access " change request records in status page
- 08:48 AM Bug #26894 (Open): Change Request status page - Able to delete " Full Access " , " View Access " , " CFT user Access " change request records in status page
- 07:28 PM Bug #26895 (Closed): Right click Add / Delete option need to Restrict in Effectiveness Tracker Form
- 06:23 PM Bug #26895 (Resolved): Right click Add / Delete option need to Restrict in Effectiveness Tracker Form
- 08:48 AM Bug #26895 (Open): Right click Add / Delete option need to Restrict in Effectiveness Tracker Form
- 06:57 PM Bug #26866 (Closed): Show only active status master instruments in all study page
- changed status as per swetha
- 08:48 AM Bug #26866 (Open): Show only active status master instruments in all study page
- 06:51 PM Bug #26901 (Closed): Empty gage numbers are displaying in "Gage Study History Card" Report
- In "Gage study history card" report, search "Gage number" filter, lot of empty gage numbers are displaying
- 06:38 PM Bug #26880 (Resolved): On editing Suite->users getting "SERVER ERROR" page on closing the "Save Successfully" alert
- 08:48 AM Bug #26880 (Open): On editing Suite->users getting "SERVER ERROR" page on closing the "Save Successfully" alert
- 06:26 PM Bug #26900 (Closed): Added Risk and optimization are displayed in Function level. on refresh only it shows properly.
- Added Risk and optimization are displayed in Function level. on refresh only it shows properly.
- 06:19 PM Bug #26899 (Closed): P- Diagram - Data collapses between Signal Input and Error states when dragging the data.(Refer Description)
- After adding the data in Error state and dragging the data, it removes the data from Error state and adds the data in...
- 05:44 PM Bug #26897 (Fixed in Dev): FMEDA issues (Refer Description)
- 05:44 PM Bug #26897 (Open): FMEDA issues (Refer Description)
- 05:21 PM Bug #26897 (Closed): FMEDA issues (Refer Description)
1. Add two failure Flow down under one parent element and add Failure flow down for one of the newly created failu...- 05:33 PM Bug #26856 (Resolved): BOM Tree issues (Refer Description)
- 05:32 PM Bug #26856 (Fixed in Dev): BOM Tree issues (Refer Description)
- 08:48 AM Bug #26856 (Open): BOM Tree issues (Refer Description)
- 05:32 PM Bug #26876 (Resolved): TSR Issues (Refer Description) (Impact issue)
- 05:31 PM Bug #26876 (Fixed in Dev): TSR Issues (Refer Description) (Impact issue)
- 08:48 AM Bug #26876 (Open): TSR Issues (Refer Description) (Impact issue)
- 05:28 PM Bug #26898 (Closed): Completion notification of action item mail got interrupted in Batch Manager
- Mail - Completion notification of action item & Notification of action item mail got interrupted in Batch Manager
- 04:48 PM Bug #26836 (Closed): Context menu for flow-down failure Edit, Copy, and delete are not required, | Flow-up and flow-down context menu not displayed for parent & child element | show/hide icon for a child element is not working properly (Refer Description)
- 04:47 PM Bug #26793 (Closed): Reset flows and flows done not working as expected. Failure analysis flow done for flow up branch is not working
- 04:47 PM Bug #26789 (Closed): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 09:39 AM Bug #26852 (Resolved): VOC issues (Refer Description)
- 08:48 AM Bug #26896 (Open): Change Management setup - During search functionality page navigation not working on clicking navigation symbol
- 08:48 AM Bug #26892 (Open): Output document Form - on clicking submit button , it shows " please select responsible person and document " alert
- 08:48 AM Bug #26890 (Open): Process change request Form - Responsible person action item alert is missing ,while clicking publish button
- 08:48 AM Bug #26888 (Open): SCR / SDR Form - While clicking Info icon in Final CFT sign off login , its shows all the content
- 08:48 AM Bug #26887 (Open): Master gage :- when the master gage as "DAMAGE" status The status is not get updated In Grid screen
- 08:48 AM Bug #26883 (Open): IFM - Interface Function and Requirement duplication issue.(Refer Description)
- 08:48 AM Bug #26882 (Open): Issues in Lucid Phase 2 Requirement No. 1
- 08:48 AM Bug #26868 (Open): MTBF Report Issues.
- 08:48 AM Bug #26863 (Open): Gage study History Card Report:- Spelling Mistake is there in Calibration Verification, Stability Studies
- 08:48 AM Bug #26862 (Open): Instruction:- Make it as right sentence ( For all the Studies )
- 08:48 AM Bug #26859 (Open): Master gage :- when the master gage as In calibration, ,Pending for calibration status While We are Performing the the Study The status is not get updated as Expected
- 08:48 AM Bug #26855 (Open): Attachment is not showing while editing the training request
11/25/2023
- 12:42 AM Bug #26867 (Resolved): Structure Analysis issues (Refer Description)
- 12:42 AM Bug #26867 (Fixed in Dev): Structure Analysis issues (Refer Description)
- 12:42 AM Bug #26867 (Open): Structure Analysis issues (Refer Description)
- 12:42 AM Bug #26852 (Fixed in Dev): VOC issues (Refer Description)
11/24/2023
- 11:06 PM Bug #26884 (Resolved): FTA issues (Refer Description)
- 11:06 PM Bug #26884 (Fixed in Dev): FTA issues (Refer Description)
- 11:06 PM Bug #26884 (Open): FTA issues (Refer Description)
- 02:56 PM Bug #26884 (Closed): FTA issues (Refer Description)
1. Gate issue
• Changing the Focus element gate type (AND to OR) or (OR to AND), the gate type changes after the...- 07:34 PM Bug #26896 (Closed): Change Management setup - During search functionality page navigation not working on clicking navigation symbol
- Change Management setup - During search functionality page navigation not working on clicking navigation symbol
- 07:20 PM Bug #26895 (Closed): Right click Add / Delete option need to Restrict in Effectiveness Tracker Form
- Effectiveness Tracker - Need to restrict Right click Add / Delete option
- 07:09 PM Bug #26894 (Closed): Change Request status page - Able to delete " Full Access " , " View Access " , " CFT user Access " change request records in status page
- Change Request status page - Able to delete " Full Access " , " View Access " , " CFT user Access " change request re...
- 07:04 PM Bug #26893 (Closed): Validation subform - Label & check box alignment issue
- In process change validation result subform - label & check box shows improper alignment
- 06:58 PM Bug #26892 (Closed): Output document Form - on clicking submit button , it shows " please select responsible person and document " alert
- Output document Form - on clicking submit button , it shows " please select responsible person and document " alert, ...
- 06:51 PM Bug #26891 (Closed): Process change request note form - Decision on stock section is editable , even after clicking not applicable check box
- Process change request note form - Decision on stock section is editable , even after clicking not applicable check box
- 06:43 PM Bug #26890 (Closed): Process change request Form - Responsible person action item alert is missing ,while clicking publish button
- Process change request Form - Responsible person action item alert is missing ,while clicking CR & CN publish button
- 06:34 PM Bug #26889 (Closed): Process change request Form - Risk & Feasibility subform label issue
- Process change request Form - Risk & Feasibility subform label shows improper alignment
- 06:22 PM Bug #26888 (Closed): SCR / SDR Form - While clicking Info icon in Final CFT sign off login , its shows all the content
- SCR / SDR Form - While clicking Info icon in Final CFT sign off login , its shows all the content
- 05:59 PM Bug #26887 (Closed): Master gage :- when the master gage as "DAMAGE" status The status is not get updated In Grid screen
- 1.when the master gage as "DAMAGE" status The status is not get updated In Grid screen
- 05:38 PM Bug #26886 (Closed): Requirements, Failures, and EFC Tree - After adding the Requirement or Failure Flow down, create a new BOM element in the BOM tree, the newly added element showing after the refresh.
- Requirements, Failures, and EFC Tree - After adding the Requirement or Failure Flow down, create a new BOM element in...
- 03:06 PM Bug #26852 (Not Resolved): VOC issues (Refer Description)
1. VOC - Allocated multiple child elements for a single Requirement and delete the Function, mismatch column occurs...- 02:34 PM Bug #26883 (Closed): IFM - Interface Function and Requirement duplication issue.(Refer Description)
Scenario: -
1. Added Elements in the Block Diagram and created an interface line. (With the same Focus and Context...- 01:05 PM Bug #26882 (Closed): Issues in Lucid Phase 2 Requirement No. 1
- 1. TYpo in 'Show All Supplier" label
2. The "Show all Suppliers" button is available when we are already showing Al... - 12:28 PM Bug #26864 (Resolved): Structure Analysis - Exclude Element option needs to be removed for the Focus Element. (Refer Description)
- changed the status to resolved as per gopi
- 12:26 PM Bug #26864 (Open): Structure Analysis - Exclude Element option needs to be removed for the Focus Element. (Refer Description)
- changed status
- 11:23 AM Bug #26869 (Resolved): FMEDA-user not able to add the new row in Causes in FMEDA
- 09:48 AM Bug #26880 (Closed): On editing Suite->users getting "SERVER ERROR" page on closing the "Save Successfully" alert
- On editing Suite->users getting "SERVER ERROR" page on closing the "Save Successfully" alert
11/23/2023
- 10:10 PM Bug #26793 (Resolved): Reset flows and flows done not working as expected. Failure analysis flow done for flow up branch is not working
- 08:57 PM Bug #26793 (Fixed in Dev): Reset flows and flows done not working as expected. Failure analysis flow done for flow up branch is not working
- 09:33 PM Bug #26838 (Resolved): P-Diagram - Header color for Control Factor and Noise Factors is not good.
- 09:32 PM Bug #26838 (Fixed in Dev): P-Diagram - Header color for Control Factor and Noise Factors is not good.
- 09:10 PM Bug #26874 (Resolved): FSR - Selected Function and clicked F2 key to edit, some alert is showing, and unable to edit the added Function and Requirement.
- 09:10 PM Bug #26874 (Open): FSR - Selected Function and clicked F2 key to edit, some alert is showing, and unable to edit the added Function and Requirement.
- 02:30 PM Bug #26874 (Closed): FSR - Selected Function and clicked F2 key to edit, some alert is showing, and unable to edit the added Function and Requirement.
- FSR - Selected Function and clicked F2 key to edit, some alert is showing, and unable to edit the added Function and ...
- 08:57 PM Bug #26873 (Resolved): FST - Selected the Requirements Document (VOC) from the menu and selected the PI, but the V Module is loading on the VOC page. (Impact issue)
- 08:56 PM Bug #26873 (Open): FST - Selected the Requirements Document (VOC) from the menu and selected the PI, but the V Module is loading on the VOC page. (Impact issue)
- 01:40 PM Bug #26873 (Closed): FST - Selected the Requirements Document (VOC) from the menu and selected the PI, but the V Module is loading on the VOC page. (Impact issue)
- FST - Selected the Requirements Document (VOC) from the menu and selected the PI, but the V Module is loading on the ...
- 08:56 PM Bug #26814 (Resolved): RFD - The Interface Types page in showing in the Main menu, After navigate from Interface types to Action(s) -> Main.
- 06:47 PM Bug #23888 (Open): UI/UX--> Setup-->Business Rule-->The PM Type label and color code is overlapping
- moved from SP 11.2.0.2 HF
- 05:27 PM Bug #26870 (Resolved): Design VDA: The structure analysis diagram is not in the center of the screen.
- 05:26 PM Bug #26870 (Fixed in Dev): Design VDA: The structure analysis diagram is not in the center of the screen.
- 05:26 PM Bug #26870 (Open): Design VDA: The structure analysis diagram is not in the center of the screen.
- 01:08 PM Bug #26870 (Closed): Design VDA: The structure analysis diagram is not in the center of the screen.
- 1. When open the structure analysis diagram is not in the center of the screen. (Refer Screenshot)
Refer TC: http:... - 05:09 PM Bug #26852 (Resolved): VOC issues (Refer Description)
- 05:09 PM Bug #26852 (Fixed in Dev): VOC issues (Refer Description)
- 03:57 PM Bug #26869 (Fixed in Dev): FMEDA-user not able to add the new row in Causes in FMEDA
- 12:52 PM Bug #26869 (Open): FMEDA-user not able to add the new row in Causes in FMEDA
- 12:31 PM Bug #26869 (Closed): FMEDA-user not able to add the new row in Causes in FMEDA
- FMEDA-user not able to add the new row in Causes in FMEDA
- 03:08 PM Bug #26876 (Closed): TSR Issues (Refer Description) (Impact issue)
1. Allocated an ASIL to the element in the FSR and added Function and Requirement in the TSR, again Allocated anoth...- 01:56 PM Bug #26846 (Resolved): TSR Traceability issues (Refer Description)
- 11:21 AM Bug #26789 (Resolved): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 11:21 AM Bug #26789 (Fixed in Dev): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 11:20 AM Bug #26857 (Resolved): VOC - Rows are not showing for the Allocate to element, Requirements Reviewed, Skip Review, Requirement Type, and Asil columns.
- 11:20 AM Bug #26857 (Fixed in Dev): VOC - Rows are not showing for the Allocate to element, Requirements Reviewed, Skip Review, Requirement Type, and Asil columns.
- 11:12 AM Bug #26857 (Open): VOC - Rows are not showing for the Allocate to element, Requirements Reviewed, Skip Review, Requirement Type, and Asil columns.
- 11:17 AM Bug #26860 (Open): AIAG VDA-Child PI Inherited flow up and flow down branch element name is incorrectly shown (Lucid Issue)
- 10:57 AM Bug #26836 (Resolved): Context menu for flow-down failure Edit, Copy, and delete are not required, | Flow-up and flow-down context menu not displayed for parent & child element | show/hide icon for a child element is not working properly (Refer Description)
- 09:29 AM Bug #26868 (Closed): MTBF Report Issues.
- 1.ELT value is showing as 0 for all Months
2.Assembly Line Wise, Manufacturing Line Wise, Equipment Wise - Its showi...
11/22/2023
- 09:00 PM Bug #26867 (Closed): Structure Analysis issues (Refer Description)
1. Added an element and saved the element, after refresh the save icon is showing. (Image 45)
2. Added Existing el...- 07:32 PM Bug #26866 (Closed): Show only active status master instruments in all study page
- 1. When master status is in "In calibration" or "Pending for Calibration" - Need to show an alert to the user regardi...
- 04:53 PM Bug #26864 (Closed): Structure Analysis - Exclude Element option needs to be removed for the Focus Element. (Refer Description)
- Structure Analysis - Exclude Element option needs to be removed for the Focus Element.
1. The Exclude Element opt... - 03:33 PM Bug #26863 (Closed): Gage study History Card Report:- Spelling Mistake is there in Calibration Verification, Stability Studies
- 1.Spelling Mistake is there in Calibration Verification, Stability Studies
- 03:21 PM Bug #26862 (Closed): Instruction:- Make it as right sentence ( For all the Studies )
- 1.Pls check Search Instruction (Please the enter 3 or more characters to search) Replace As (Please enter 3 or more ...
- 02:19 PM Bug #26860 (Closed): AIAG VDA-Child PI Inherited flow up and flow down branch element name is incorrectly shown (Lucid Issue)
- 1. AIAG VDA-Child PI update severity rating, function, requirement, and failure parent PI also updating
2. Child PI ... - 02:11 PM Bug #26859 (Closed): Master gage :- when the master gage as In calibration, ,Pending for calibration status While We are Performing the the Study The status is not get updated as Expected
- 1.when the master gage as In calibration, ,Pending for calibration status While We are Performing the the Study Th...
- 12:49 PM Bug #26857 (Closed): VOC - Rows are not showing for the Allocate to element, Requirements Reviewed, Skip Review, Requirement Type, and Asil columns.
- VOC - Rows are not showing for the Allocate to element, Requirements Reviewed, Skip Review, Requirement Type, and Asi...
- 12:38 PM Bug #26856 (Closed): BOM Tree issues (Refer Description)
1. Added multiple BOM elements, showing only one in the BOM tree, After Refreshing it shows all the elements.
2. C...- 11:24 AM Bug #26855 (Closed): Attachment is not showing while editing the training request
11/21/2023
11/20/2023
- 04:47 PM Bug #26836 (Fixed in Dev): Context menu for flow-down failure Edit, Copy, and delete are not required, | Flow-up and flow-down context menu not displayed for parent & child element | show/hide icon for a child element is not working properly (Refer Description)
- 03:09 PM Bug #26846: TSR Traceability issues (Refer Description)
- Moved from SP 11.2.0.9 Patch
- 03:08 PM Bug #26852: VOC issues (Refer Description)
- Moved from SP 11.2.0.9 Patch
11/17/2023
- 06:14 PM Bug #26852 (Open): VOC issues (Refer Description)
- 12:59 PM Bug #26852 (Closed): VOC issues (Refer Description)
1. VOC - Allocated multiple child elements for a single Requirement and delete the Function, mismatch column occurs...- 04:42 PM Bug #26792 (Not Resolved): Function and Failure New UI issues (Refer added Document)
- 01:25 PM Bug #26815 (Not Resolved): In MRF 8D, ICA Submit, RCA submit options are missing.
- 12:52 PM Bug #26789: Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- Refer TC: http://1.22.172.236:81/testlink/ltx.php?item=exec&feature_id=40771&build_id=45
- 11:44 AM Bug #26789 (Not Resolved): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 1. Inheritance-delete flow down is not working -Not Fixed
2. Inheritance function/requirement/failure click and dr... - 12:03 PM Bug #26770: VOC-Image is not loaded from Doc -pro
- Need Jayahari's support
- 11:47 AM Bug #26793: Reset flows and flows done not working as expected. Failure analysis flow done for flow up branch is not working
- 1. without requirement and failure flows done and reset flows done popup element name and function name are not displ...
11/16/2023
- 01:35 PM Bug #26824 (Not Fixed with Hotfix): P Diagram issues (Refer Description)
- • Added existing Functions and Failures after the refresh switches are OFF. - Not Fixed
11/15/2023
- 10:45 PM Bug #26824 (Fixed with Hotfix): P Diagram issues (Refer Description)
- 10:44 PM Bug #26824 (Fixed in Dev): P Diagram issues (Refer Description)
- 05:52 PM Bug #26824: P Diagram issues (Refer Description)
- Ramamoorthi Gopinath wrote:
> • Added existing Functions and Failures after the refresh switches are OFF.
> • Not a... - 07:21 PM Bug #26848 (Open): PCN Form - Team sign off and Review log label missing
- 06:20 PM Bug #26848 (Closed): PCN Form - Team sign off and Review log label missing
- Team sign off and Review log label missing in PCN Form
- 07:21 PM Bug #26846 (Open): TSR Traceability issues (Refer Description)
- 04:37 PM Bug #26846 (Closed): TSR Traceability issues (Refer Description)
1. Not showing the added TSR Function and Requirement in the Safety Goal Traceability, showing after refreshing.
...- 07:20 PM Bug #26845 (Open): After changing the site for a concern in MRF flow, the related teams are not getting populated in the select team option.
- 04:01 PM Bug #26845 (Closed): After changing the site for a concern in MRF flow, the related teams are not getting populated in the select team option.
- After changing the site for a concern in MRF flow, the related teams are not getting populated in the select team opt...
- 03:49 PM Bug #26789 (Resolved): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 10:48 AM Bug #26789 (Fixed with Hotfix): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 10:48 AM Bug #26789 (Fixed in Dev): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 01:47 PM Bug #26806: When user selecting the multiple document and clicking on the bulk approval button-->Select Reassign option-->with out selecting reassign users-->click done-->"Parse error" alert message shown
- This is KIML specific, please move to 11.2.0.10
- 11:26 AM Bug #26806: When user selecting the multiple document and clicking on the bulk approval button-->Select Reassign option-->with out selecting reassign users-->click done-->"Parse error" alert message shown
- http://1.22.172.236:81/testlink/linkto.php?tprojectPrefix=EwQIMS&item=testcase&id=EwQIMS-39156
- 01:39 PM Bug #26792 (Resolved): Function and Failure New UI issues (Refer added Document)
- 08:42 AM Bug #26843 (Open): Frequently the 8D MRF option is missing from the application
- 01:38 AM Bug #26843 (Closed): Frequently the 8D MRF option is missing from the application
- Frequently the 8D MRF option is missing from the application
- 08:42 AM Bug #26836 (Open): Context menu for flow-down failure Edit, Copy, and delete are not required, | Flow-up and flow-down context menu not displayed for parent & child element | show/hide icon for a child element is not working properly (Refer Description)
11/14/2023
- 03:53 PM Bug #26789 (Not Fixed with Hotfix): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- Issue 1, 2, & 3 Not fixed
- 02:46 PM Bug #26838 (Closed): P-Diagram - Header color for Control Factor and Noise Factors is not good.
- Header color for Control Factor and Noise Factors is not good.
- 01:14 PM Bug #26836 (Closed): Context menu for flow-down failure Edit, Copy, and delete are not required, | Flow-up and flow-down context menu not displayed for parent & child element | show/hide icon for a child element is not working properly (Refer Description)
- 1. The context menu for flow-down failure Edit, Copy, and delete are not required.
2. Failure analysis page Diagramm... - 11:32 AM Bug #26806 (Not Resolved): When user selecting the multiple document and clicking on the bulk approval button-->Select Reassign option-->with out selecting reassign users-->click done-->"Parse error" alert message shown
- 11:03 AM Bug #26806 (Resolved): When user selecting the multiple document and clicking on the bulk approval button-->Select Reassign option-->with out selecting reassign users-->click done-->"Parse error" alert message shown
- 11:03 AM Bug #26806 (Fixed in Dev): When user selecting the multiple document and clicking on the bulk approval button-->Select Reassign option-->with out selecting reassign users-->click done-->"Parse error" alert message shown
11/10/2023
- 10:41 PM Bug #26789 (Fixed with Hotfix): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 10:41 PM Bug #26789 (Fixed in Dev): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 03:20 PM Bug #26792 (Fixed in Dev): Function and Failure New UI issues (Refer added Document)
- 10:03 AM Bug #26815 (Resolved): In MRF 8D, ICA Submit, RCA submit options are missing.
- 10:02 AM Bug #26815 (Fixed in Dev): In MRF 8D, ICA Submit, RCA submit options are missing.
- 08:45 AM Bug #26815 (Open): In MRF 8D, ICA Submit, RCA submit options are missing.
- 08:45 AM Bug #26824 (Open): P Diagram issues (Refer Description)
- 08:45 AM Bug #26817 (Open): In Priorities, if the priority is set as default, then the priority is ot dispaying in the concern initial evaluation page.
- 08:45 AM Bug #26814 (Open): RFD - The Interface Types page in showing in the Main menu, After navigate from Interface types to Action(s) -> Main.
11/09/2023
- 06:14 PM Bug #26824 (Closed): P Diagram issues (Refer Description)
• Added existing Functions and Failures after the refresh switches are OFF.
• Not able to delete the added categor...- 11:09 AM Bug #26806 (Open): When user selecting the multiple document and clicking on the bulk approval button-->Select Reassign option-->with out selecting reassign users-->click done-->"Parse error" alert message shown
- 10:44 AM Bug #26817 (Closed): In Priorities, if the priority is set as default, then the priority is ot dispaying in the concern initial evaluation page.
- In Priorities, if the priority is set as default, then the priority is ot dispaying in the concern initial evaluation...
- 01:10 AM Bug #26815 (Closed): In MRF 8D, ICA Submit, RCA submit options are missing.
- In MRF 8D, ICA Submit, RCA submit options are missing.
11/08/2023
- 08:11 PM Bug #26814 (Closed): RFD - The Interface Types page in showing in the Main menu, After navigate from Interface types to Action(s) -> Main.
- RFD - The Interface Types page is shown in the Main menu after navigating from Interface Types to Action(s) -> Main.
- 01:57 PM Bug #26806 (Closed): When user selecting the multiple document and clicking on the bulk approval button-->Select Reassign option-->with out selecting reassign users-->click done-->"Parse error" alert message shown
- Bulk approval-->Select Reassign option-->with out selecting reassign users-->click done-->Parse error alert messages ...
- 01:36 PM Bug #26793 (Open): Reset flows and flows done not working as expected. Failure analysis flow done for flow up branch is not working
- 01:36 PM Bug #26792 (Open): Function and Failure New UI issues (Refer added Document)
- 01:36 PM Bug #26789 (Open): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
11/07/2023
- 05:56 PM Bug #26793 (Closed): Reset flows and flows done not working as expected. Failure analysis flow done for flow up branch is not working
- Reset flows and flows done not working as expected
1. without requirement and failure flows done and reset flows don... - 05:51 PM Bug #26792 (Closed): Function and Failure New UI issues (Refer added Document)
Functions and Failures issues –
1. Not able to add multiple Functions or Failures, after adding one branch withou...- 05:35 PM Bug #26789 (Closed): Lucid Reported Inheritance issue child DFMEA severity rating not updated, delete flow down, and click and drop issues (Refer Description)
- 1. Inheritance-delete flow down is not working
2. Inheritance function/requirement/failure click and drop on any ... - 08:44 AM Bug #26770 (Open): VOC-Image is not loaded from Doc -pro
11/06/2023
- 03:49 PM Bug #26770: VOC-Image is not loaded from Doc -pro
- Image added from doc pro in VOC it will not automatically closed the window…
- 03:40 PM Bug #26770 (Closed): VOC-Image is not loaded from Doc -pro
- VOC-Image is not loaded from Doc -pro
Also available in: Atom