SP925

03/05/2020

11:46 AM Bug #15704 (Resolved): VEM engagement model screen-Audit calender--Clicking on audit from calendar no details showing in update/delete page

Root Cause :Mapping structure is deleted Nikhil d

03/04/2020

10:26 PM Bug #15708 (Fixed with Hotfix): Calibration: (Attribute and Variable) certificate--> The value of Least tolerance 0.0000025 is not getting properly updated in Certificate

Kiruthika G

05:01 PM Bug #15708 (Resolved): Calibration: (Attribute and Variable) certificate--> The value of Least tolerance 0.0000025 is not getting properly updated in Certificate

Prabhu P

10:24 PM Bug #15801 (Not Fixed with Hotfix): Gage Type(New and Existing): When entering the discrimination value as "99.999999999", it showing 99.999999988999 in gage type listing screen

Kiruthika G

05:16 PM Bug #15801 (Resolved): Gage Type(New and Existing): When entering the discrimination value as "99.999999999", it showing 99.999999988999 in gage type listing screen

Prabhu P

05:05 PM Bug #15801 (Open): Gage Type(New and Existing): When entering the discrimination value as "99.999999999", it showing 99.999999988999 in gage type listing screen

Smitha V

05:21 PM Bug #15805 (Fixed with Hotfix): Gage Type: Import--> when tries to import the same gage type, it showing error like "Incorrect syntax error;;"

Kiruthika G

05:15 PM Bug #15805 (Resolved): Gage Type: Import--> when tries to import the same gage type, it showing error like "Incorrect syntax error;;"

Prabhu P

05:04 PM Bug #15805 (Open): Gage Type: Import--> when tries to import the same gage type, it showing error like "Incorrect syntax error;;"

Smitha V

04:04 PM Bug #15805 (Closed): Gage Type: Import--> when tries to import the same gage type, it showing error like "Incorrect syntax error;;"

Gage Type: Import--> when tries to import the same gage type, it showing error like "Incorrect syntax error;;" Kiruthika G

05:16 PM Bug #15739 (Fixed with Hotfix): Report: Gage list by status - The least tolerance value is not getting updated in Gage list by status

Kiruthika G

04:19 PM Bug #15739 (Resolved): Report: Gage list by status - The least tolerance value is not getting updated in Gage list by status

Prabhu P

05:12 PM Bug #15743 (Fixed with Hotfix): Report--> List of measurement system and lab scope measurement--> The least tolerance not updated in list of measurement

Kiruthika G

04:15 PM Bug #15743 (Resolved): Report--> List of measurement system and lab scope measurement--> The least tolerance not updated in list of measurement

Prabhu P

04:12 PM Bug #15692 (Closed): Gage Type: Attribute--> The given discrimination value is not showing in the listing screen

Kiruthika G

04:09 PM Bug #15695 (Fixed with Hotfix): Gages--> Import--> The 0.000095 value of least tolerance is not getting updated while importing, it displays error like "Error converting data type nvarchar to numeric."

Kiruthika G

04:07 PM Bug #15746 (Fixed with Hotfix): Gage Type (Import) - When edit and save the imported gage type without giving the description field, it displays the alert like "Please specify description". In excel, it description field like optional

Kiruthika G

03:59 PM Bug #15748 (Fixed with Hotfix): Gage: Attribute--> When importing the gage type(Without giving the information of Discrimination and UOM), the parameter name is not getting updated in gage type creating screen

Kiruthika G

03:32 PM Bug #15749 (Fixed with Hotfix): Gage->Import--> Gage parameter--> When tries to import gage parameter with least tolerance value as "0.00001", it displays error message like "Error converting data type nvarchar to numeric".

Kiruthika G

03:22 PM Bug #15758 (Fixed with Hotfix): Gage-->Import--> When imported gage status, the date of the gage is shown as "1-1-1900" and it displays multiple time in the gage listing screen

Kiruthika G

03/03/2020

06:34 PM Bug #15741 (Fixed with Hotfix): Stability: When using Lest tolerance value as "0.000025" in gage, in stability study the least tolerance showing the value as "3.5E-05"

Kiruthika G

06:31 PM Bug #15738 (Not Fixed with Hotfix): Calibration(Attribute and Variable): The trail value of calibration study is displays as "2.58E-06" in chart

Kiruthika G

06:30 PM Bug #15713 (Fixed with Hotfix): External Lab calibration: Entered uncertainty value is added with Zero

Kiruthika G

06:22 PM Bug #15701 (Fixed with Hotfix): Calibration: If entering the value as "0.00000025" in Data entry field, while clicking on calculate button, the output value of average, bias and standard deviation shows as "2E-58".

Kiruthika G

06:19 PM Bug #15700 (Fixed with Hotfix): Gage(Attribute)--> The value of Lest tolerance is not updated in Least tolerance of GRR attribute study and calibration verification study

Kiruthika G

06:17 PM Bug #15699 (Fixed with Hotfix): GRR Variable--> When entering the value as "0.0000025655" in part field, after saving the data, it displays the value as "2.55E-06"

Kiruthika G

06:15 PM Bug #15696 (Fixed with Hotfix): Bias--> The least tolerance value of gage is shown like "2.5E-05". Refer screenshot

Kiruthika G

06:12 PM Bug #15694 (Fixed with Hotfix): Gage: When entering the Least tolerance as "0.000025", the system taking the value as "0.00003". It should display the value as "0.000025"

Kiruthika G

06:07 PM Bug #15801 (Closed): Gage Type(New and Existing): When entering the discrimination value as "99.999999999", it showing 99.999999988999 in gage type listing screen

Gage Type: When entering the discrimination value as "99.999999999", it showing 99.999999988999 in gage type listing ... Kiruthika G

06:05 PM Bug #15691 (Fixed with Hotfix): Gage Type: When a user tries to edit the discrimination value for Existing Gage type as 99.999999999, the Gage type screen is not loading

Kiruthika G

11:11 AM Bug #15680: VEM audit calender-Tentative event audit unable to confirm using update option as on clicking audit the details not getting loaded

Duplicate Issue :Bug #15704 Nikhil d

11:09 AM Bug #15769: Supplier Report-Created Supplier,commodity,Assigned BU/Sub BU not listing in any of the reports

Not an issue. Job is not scheduled Nikhil d

11:08 AM Bug #15704 (Open): VEM engagement model screen-Audit calender--Clicking on audit from calendar no details showing in update/delete page

Root Cause :Due to Assign with deleted Part-location Mapping Nikhil d

03/02/2020

12:30 PM Bug #15758 (Resolved): Gage-->Import--> When imported gage status, the date of the gage is shown as "1-1-1900" and it displays multiple time in the gage listing screen

Prabhu P

11:13 AM Bug #15758 (Open): Gage-->Import--> When imported gage status, the date of the gage is shown as "1-1-1900" and it displays multiple time in the gage listing screen

Smitha V

12:30 PM Bug #15749 (Resolved): Gage->Import--> Gage parameter--> When tries to import gage parameter with least tolerance value as "0.00001", it displays error message like "Error converting data type nvarchar to numeric".

Prabhu P

11:13 AM Bug #15749 (Open): Gage->Import--> Gage parameter--> When tries to import gage parameter with least tolerance value as "0.00001", it displays error message like "Error converting data type nvarchar to numeric".

Smitha V

12:29 PM Bug #15748 (Resolved): Gage: Attribute--> When importing the gage type(Without giving the information of Discrimination and UOM), the parameter name is not getting updated in gage type creating screen

Prabhu P

11:13 AM Bug #15748 (Open): Gage: Attribute--> When importing the gage type(Without giving the information of Discrimination and UOM), the parameter name is not getting updated in gage type creating screen

Smitha V

12:29 PM Bug #15746 (Resolved): Gage Type (Import) - When edit and save the imported gage type without giving the description field, it displays the alert like "Please specify description". In excel, it description field like optional

Prabhu P

11:13 AM Bug #15746 (Open): Gage Type (Import) - When edit and save the imported gage type without giving the description field, it displays the alert like "Please specify description". In excel, it description field like optional

Smitha V

12:28 PM Bug #15741 (Resolved): Stability: When using Lest tolerance value as "0.000025" in gage, in stability study the least tolerance showing the value as "3.5E-05"

Prabhu P

11:13 AM Bug #15741 (Open): Stability: When using Lest tolerance value as "0.000025" in gage, in stability study the least tolerance showing the value as "3.5E-05"

Smitha V

12:26 PM Bug #15738 (Resolved): Calibration(Attribute and Variable): The trail value of calibration study is displays as "2.58E-06" in chart

Prabhu P

11:13 AM Bug #15738 (Open): Calibration(Attribute and Variable): The trail value of calibration study is displays as "2.58E-06" in chart

Smitha V

12:25 PM Bug #15713 (Resolved): External Lab calibration: Entered uncertainty value is added with Zero

Prabhu P

11:13 AM Bug #15713 (Open): External Lab calibration: Entered uncertainty value is added with Zero

Smitha V

12:22 PM Bug #15701 (Resolved): Calibration: If entering the value as "0.00000025" in Data entry field, while clicking on calculate button, the output value of average, bias and standard deviation shows as "2E-58".

Prabhu P

11:13 AM Bug #15701 (Open): Calibration: If entering the value as "0.00000025" in Data entry field, while clicking on calculate button, the output value of average, bias and standard deviation shows as "2E-58".

Smitha V

12:20 PM Bug #15700 (Resolved): Gage(Attribute)--> The value of Lest tolerance is not updated in Least tolerance of GRR attribute study and calibration verification study

Prabhu P

11:13 AM Bug #15700 (Open): Gage(Attribute)--> The value of Lest tolerance is not updated in Least tolerance of GRR attribute study and calibration verification study

Smitha V

12:05 PM Bug #15699 (Resolved): GRR Variable--> When entering the value as "0.0000025655" in part field, after saving the data, it displays the value as "2.55E-06"

Prabhu P

11:13 AM Bug #15699 (Open): GRR Variable--> When entering the value as "0.0000025655" in part field, after saving the data, it displays the value as "2.55E-06"

Smitha V

11:53 AM Bug #15696 (Resolved): Bias--> The least tolerance value of gage is shown like "2.5E-05". Refer screenshot

Prabhu P

11:13 AM Bug #15696 (Open): Bias--> The least tolerance value of gage is shown like "2.5E-05". Refer screenshot

Smitha V

11:50 AM Bug #15695 (Resolved): Gages--> Import--> The 0.000095 value of least tolerance is not getting updated while importing, it displays error like "Error converting data type nvarchar to numeric."

Prabhu P

11:13 AM Bug #15695 (Open): Gages--> Import--> The 0.000095 value of least tolerance is not getting updated while importing, it displays error like "Error converting data type nvarchar to numeric."

Smitha V

11:50 AM Bug #15694 (Resolved): Gage: When entering the Least tolerance as "0.000025", the system taking the value as "0.00003". It should display the value as "0.000025"

Prabhu P

11:13 AM Bug #15694 (Open): Gage: When entering the Least tolerance as "0.000025", the system taking the value as "0.00003". It should display the value as "0.000025"

Smitha V

11:47 AM Bug #15692 (Resolved): Gage Type: Attribute--> The given discrimination value is not showing in the listing screen

Prabhu P

11:13 AM Bug #15692 (Open): Gage Type: Attribute--> The given discrimination value is not showing in the listing screen

Smitha V

11:46 AM Bug #15691 (Resolved): Gage Type: When a user tries to edit the discrimination value for Existing Gage type as 99.999999999, the Gage type screen is not loading

Prabhu P

11:13 AM Bug #15691 (Open): Gage Type: When a user tries to edit the discrimination value for Existing Gage type as 99.999999999, the Gage type screen is not loading

Smitha V

11:13 AM Bug #15743 (Open): Report--> List of measurement system and lab scope measurement--> The least tolerance not updated in list of measurement

Smitha V

11:13 AM Bug #15742 (Open): MSA Calendar: When clicking on view more icon, the page is not loading

Smitha V

11:13 AM Bug #15739 (Open): Report: Gage list by status - The least tolerance value is not getting updated in Gage list by status

Smitha V

11:13 AM Bug #15708 (Open): Calibration: (Attribute and Variable) certificate--> The value of Least tolerance 0.0000025 is not getting properly updated in Certificate

Smitha V

11:13 AM Bug #15698 (Open): Calibration verification, Calibration, Bias, GRR(Varibale and Attribute) and Stability- Need tooltip for data entry field to view the entered value "n"numbers of decimal value.

Smitha V

03/01/2020

12:35 AM Bug #15771 (Open): VEM-Supplier User is unable to do corrective action response using any of the CAR form,Forms is not getting published

VEm-Supplier User is unable to do corrective action response using any of the CAR form,Forms is not getting published Saradha Balan

12:32 AM Bug #15770 (Resolved): Sporadic issue-Though commodity name specified keep on displaying alert "Please specify commodity" upon saving

Sporadic issue-Though commodity name specified keep on displaying alert "Please specify commodity" upon saving Saradha Balan

12:31 AM Bug #15769 (Open): Supplier Report-Created Supplier,commodity,Assigned BU/Sub BU not listing in any of the reports

Supplier Report-Created Supplier,commodity,Assigned BU/Sub BU not listing in any of the reports Saradha Balan

02/28/2020

01:26 AM Bug #15758 (Closed): Gage-->Import--> When imported gage status, the date of the gage is shown as "1-1-1900" and it displays multiple time in the gage listing screen

Gage-->Import--> When imported gage status, the date of the gage is shown as "1-1-1900" and it displays multiple time... Kiruthika G

02/27/2020

11:47 PM Bug #15749 (Closed): Gage->Import--> Gage parameter--> When tries to import gage parameter with least tolerance value as "0.00001", it displays error message like "Error converting data type nvarchar to numeric".

Gage->Import--> Gage parameter--> When tries to import gage parameter with least tolerance value as "0.00001", it dis... Kiruthika G

10:45 PM Bug #15748 (Closed): Gage: Attribute--> When importing the gage type(Without giving the information of Discrimination and UOM), the parameter name is not getting updated in gage type creating screen

Gage: Attribute--> When importing the gage type(Without giving the information of Discrimination and UOM), the parame... Kiruthika G

10:37 PM Bug #15746 (Closed): Gage Type (Import) - When edit and save the imported gage type without giving the description field, it displays the alert like "Please specify description". In excel, it description field like optional

Gage Type (Import) - When edit and save the imported gage type without giving the description field, it displays the ... Kiruthika G

07:15 AM Bug #15743 (Closed): Report--> List of measurement system and lab scope measurement--> The least tolerance not updated in list of measurement

Report--> List of measurement system--> The least tolerance not updated in list of measurement. Refer screenshot Kiruthika G

06:59 AM Bug #15742 (Closed): MSA Calendar: When clicking on view more icon, the page is not loading

MSA Calendar: When clicking on view more icon, the page is not loading Kiruthika G

06:50 AM Bug #15741 (Closed): Stability: When using Lest tolerance value as "0.000025" in gage, in stability study the least tolerance showing the value as "3.5E-05"

Stability: When using Lest tolerance value as "0.000025" in gage, in stability study the least tolerance showing the ... Kiruthika G

06:37 AM Bug #15739 (Closed): Report: Gage list by status - The least tolerance value is not getting updated in Gage list by status

Report: Gage list by status - The least tolerance value is not getting updated in Gage list by status Kiruthika G

06:29 AM Bug #15738 (Closed): Calibration(Attribute and Variable): The trail value of calibration study is displays as "2.58E-06" in chart

Calibration(Attribute and Variable): The trail value of calibration study is displays as "2.58E-06" in chart Kiruthika G

06:02 AM Bug #15733 (Closed): Supplier Report-If commodity have only BU and no Sub BU then all the report related to commodity not showing the details properly

Supplier Report-If commodity have only BU and no Sub BU then all the report related to commodity not showing the deta... Saradha Balan

05:41 AM Bug #15717 (Closed): BU report-Sub BU not showing correct for the BU

BU report-Sub BU not showing correct for the BU Saradha Balan

05:24 AM Bug #15713 (Closed): External Lab calibration: Entered uncertainty value is added with Zero

External Lab calibration: Entered uncertainty value is added with Zero. Refer attached videom Kiruthika G

05:21 AM Bug #15711 (Closed): Supplier Report-Mapping structure report-Commodity listing lissue(filter issue)

Supplier Report-Mapping structure report-Commodity listing lissue(filter issue) Saradha Balan

05:14 AM Bug #15708 (Closed): Calibration: (Attribute and Variable) certificate--> The value of Least tolerance 0.0000025 is not getting properly updated in Certificate

Calibration: (Attribute and Variable) certificate--> The value of Least tolerance 0.0000025 is not getting properly u... Kiruthika G

05:13 AM Bug #15706 (Closed): Audit score report-SCAR value shows wrong

Audit score report-Score,RYG value shows wrong Saradha Balan

05:12 AM Bug #15705 (Closed): Label for Adherence,process audit report mismatch between menu and in report heading

Label for Adherence,process audit report mismatch between menu and in report heading Saradha Balan

05:08 AM Bug #15704 (Closed): VEM engagement model screen-Audit calender--Clicking on audit from calendar no details showing in update/delete page

VEM engagement model screen-Audit calender--Clicking on audit from calendar no details showing in update/delete page Saradha Balan

05:07 AM Bug #15703 (Resolved): Supplier Report,commodity screen-If multiple BU have same SBU then sbu display duplicate.refer screen shot

Supplier Report,commodity screen-If multiple BU have same SBU then sbu display duplicate.refer screen shot Saradha Balan

05:05 AM Bug #15702 (Resolved): In a multiple RBU if any few have same RSBU- unable to map in commodity screen

In a multiple RBU if any few have same RSBU- unable to map in commodity screen Saradha Balan

04:45 AM Bug #15701 (Closed): Calibration: If entering the value as "0.00000025" in Data entry field, while clicking on calculate button, the output value of average, bias and standard deviation shows as "2E-58".

Calibration: If entering the value as "0.00000025" in Data entry field, while clicking on calculate button, the outpu... Kiruthika G

04:33 AM Bug #15700 (Closed): Gage(Attribute)--> The value of Lest tolerance is not updated in Least tolerance of GRR attribute study and calibration verification study

Gage(Attribute)--> The value of Lest tolerance is not updated in Least tolerance of *GRR attribute study and calibrat... Kiruthika G

04:18 AM Bug #15699 (Closed): GRR Variable--> When entering the value as "0.0000025655" in part field, after saving the data, it displays the value as "2.55E-06"

Issue 1: GRR Variable--> When entering the value as "0.0000025655" in part field, after saving the data, it displays ... Kiruthika G

03:13 AM Bug #15698 (Closed): Calibration verification, Calibration, Bias, GRR(Varibale and Attribute) and Stability- Need tooltip for data entry field to view the entered value "n"numbers of decimal value.

Calibration verification, Calibration, Bias, GRR(Varibale and Attribute) and Stability- Need tooltip for data entry ... Kiruthika G

01:36 AM Bug #15696 (Closed): Bias--> The least tolerance value of gage is shown like "2.5E-05". Refer screenshot

Bias--> The least tolerance value of gage is shown like "2.5E-05". Refer screenshot Kiruthika G

01:07 AM Bug #15695 (Closed): Gages--> Import--> The 0.000095 value of least tolerance is not getting updated while importing, it displays error like "Error converting data type nvarchar to numeric."

Gages--> Import--> The 0.000095 value of least tolerance is not getting updated while importing, it displays error li... Kiruthika G

12:25 AM Bug #15694 (Closed): Gage: When entering the Least tolerance as "0.000025", the system taking the value as "0.00003". It should display the value as "0.000025"

Gage: When entering the Least tolerance as "0.000025", the system taking the value as "0.00003". It should display th... Kiruthika G

12:24 AM Bug #15693 (Open): MultiSite: Shows some of the integrated documents as native documents. When hovering on the documents, shows brown colour

MultiSite: Shows some of the integrated documents as native documents. When hovering on the documents, shows brown co... Anonymous

02/26/2020

11:58 PM Bug #15692 (Closed): Gage Type: Attribute--> The given discrimination value is not showing in the listing screen

Issue 1: Gage Type: Attribute--> The given discrimination value is not showing in the listing screen
Issue 2: Ga... Kiruthika G

11:45 PM Bug #15691 (Closed): Gage Type: When a user tries to edit the discrimination value for Existing Gage type as 99.999999999, the Gage type screen is not loading

Gage Type: When a user tries to edit the discrimination value for Existing Gage type as 99.999999999, the Gage type s... Kiruthika G

05:09 AM Bug #15642: Date gets reduced to the previous day during publishing—Check by changing the time zone

Date shown as 27 02 2020 01.41 Ragavi Ram

01:00 AM Bug #15642: Date gets reduced to the previous day during publishing—Check by changing the time zone

Set UTC-12.00 time zone
Actual time now 12.57 pm,26th Feb 2020----After time zone change shows date as 25-02-2020 0... Anonymous

01:07 AM Bug #15690 (Closed): New Document Request: Blank data displays in the below mentioned scenario

New Document Request: Blank data displays in the below mentioned scenario
* Request New document
* Select Level... Ragavi Ram

12:42 AM Bug #15688 (Closed): In the Approval Section, By opening and viewing the attached reference document its displaying an unwanted name in the Title Bar

In the Approval Section, By opening and viewing the attached reference document its displaying an unwanted name in th... Ragavi Ram

12:38 AM Bug #15687 (Closed): Reference attachment - Not able to view the URL added in " The file is located at this URL" field

Reference attachment - Not able to view the URL added in " The file is located at this URL" field Ragavi Ram

12:30 AM Bug #15686 (Resolved): Commodity:No validation message for data dependencies.Able to edit/delete RBU,RSBU for a Commodity which has already used for previous audit

Commodity:No validation message for data dependencies.Able to edit/delete RBU,RSBU for a Commodity which has already ... Saradha Balan

02/25/2020

12:43 PM Bug #15685 (Closed): Supplier Report-Audit score Report-Though no nc raised while performing VEM in audit report it shows 1 in Red

Supplier Report-Audit score Report-Though no nc raised while performing VEM in audit report it shows 1 in Red Saradha Balan

12:41 PM Bug #15684 (Closed): Supplier Report-Audit score report-Score shows mismatch between audit report and audit performed.Refer screen shot

Supplier Report-Audit score report-Score shows mismatch between audit report and audit performed.Refer screen shot Saradha Balan

02/24/2020

12:19 PM Bug #15683 (Closed): Supplier Reports-Based on the filter report is not showing instead it is showing all the data

Supplier Reports-Based on the filter report is not showing instead it is showing all the data Saradha Balan

12:18 PM Bug #15682 (Closed): Supplier Report-Reports showing both VAm and VEM reports instead it should show only VEM reports

Supplier Report-Reports showing both VAm and VEM reports instead it should show only VEM reports Saradha Balan

11:08 AM Bug #15681 (Closed): Supplier Report-Site specific filter is not available.Report shows data from all the sites related to filter

Supplier Report-Site specific filter is not available.Report shows data from all the sites related to filter Saradha Balan

02/21/2020

12:43 PM Bug #15680 (Closed): VEM audit calender-Tentative event audit unable to confirm using update option as on clicking audit the details not getting loaded

VEM audit calender-Tentative event audit unable to confirm using update option as on clicking audit the details not g... Saradha Balan

12:31 PM Bug #15679 (Closed): There is no alert to notify map segment has not mapped to audit program.During VEM audit schedule "Schedule created" alert has displayed but no audit generated because of not mapping segment

There is no alert to notify map segment has not mapped to audit program.During VEM audit schedule "Schedule created" ... Saradha Balan

10:18 AM Bug #15678 (Closed): Supplier Report:Report shows only commodity audits not showing audit done for parts mapped to those commodity

Supplier Report:Report shows only commodity audits not showing audit done for parts mapped to those commodity Saradha Balan

02/20/2020

04:47 PM Bug #15677 (Closed): Supplier Report:SQIE not listing auditor name specific to audit instead it shows all SQI assigned for the supplier

Supplier Report:SQIE not listing auditor name specific to audit instead it shows all SQI assigned for the supplier Saradha Balan

02/18/2020

07:56 PM Bug #15671: VAM-corrective action close out-unable to import error alert is displaying

WAD. PFA Nikhil d

07:01 PM Bug #15671 (Open): VAM-corrective action close out-unable to import error alert is displaying

VAM-corrective action close out-unable to import error alert is displaying Saradha Balan

07:45 PM Bug #15669: while importng checklists and if have session issue imported checklists reflected in auditpro not in supplier portal

Cannot able to replicate again by QA Nikhil d

06:59 PM Bug #15669 (Open): while importng checklists and if have session issue imported checklists reflected in auditpro not in supplier portal

while importng checklists and if have session issue imported checklists reflected in auditpro not in supplier portal Saradha Balan

07:19 PM Bug #15665 (Resolved): Audit scheduled from corporate for different site not listing in corresponding site perform audit page

Nikhil d

07:19 PM Bug #15665 (Open): Audit scheduled from corporate for different site not listing in corresponding site perform audit page

Wrong Scenario. Not an issue Nikhil d

06:59 PM Bug #15670 (Resolved): Unable to export VAM publish report in firefox

Unable to export VAM publish report in firefox Saradha Balan

06:57 PM Bug #15668 (Resolved): No option to create sub business unit in Business Unit master screen

No option to create sub business unit in Business Unit master screen Saradha Balan

02/17/2020

03:58 PM Bug #15666 (Resolved): Unable to delete schedule audit from update/delete schedule audit page

Nikhil d

03:58 PM Bug #15666 (Open): Unable to delete schedule audit from update/delete schedule audit page

Cannot Able To replicate Nikhil d

02:54 PM Bug #15666 (Closed): Unable to delete schedule audit from update/delete schedule audit page

Unable to delete schedule audit from update/delete schedule audit page Saradha Balan

02:46 PM Bug #15665 (Closed): Audit scheduled from corporate for different site not listing in corresponding site perform audit page

Audit scheduled from corporate for different site not listing in corresponding site perform audit page Saradha Balan

01:08 PM Bug #15664 (Resolved): View supply chain button is available for a supplier created from suite have no add part option

View supply chain button is available for a supplier created from suite have no add part option Saradha Balan

01:05 PM Bug #15663 (Open): Creating supplier form Suite but without adding part option(no risks has selected),still Add/View doc option available.No need these if no option for add parts

Creating supplier form Suite but without adding part option(no risks has selected),still Add/View doc option availabl... Saradha Balan

12:29 PM Bug #15662 (Resolved): Unable to create supplier from Suite

Unable to create supplier from Suite Saradha Balan

12:18 PM Bug #15661 (Open): Part number missing in view doc page if part tree loaded by PARTS

Part number missing in view doc page if part tree loaded by PARTS Saradha Balan

12:16 PM Bug #15660 (Open): If same part name/number for two plants then it shows multiple times in document type master page.Refer screen shot

If same part name/number for two plants then it shows multiple times in document type master page Saradha Balan

12:15 PM Bug #15659 (Open): Duplicate plant name displaying in document type master(forms and checklists doesn't have documents added).Refer screen shot

Duplicate plant name displaying in document type master(forms and checklists doesn't have documents added) Saradha Balan

12:13 PM Bug #15658 (Open): Doc type master-Attach from local-file status shows as error(xl file)

Doc type master-Attach from local-file status shows as error(xl file) Saradha Balan

02/14/2020

04:52 PM Bug #15656 (Closed): Reports-Adherence Report-VEM audit-If an audit has updated with new date then it is not showing in the report

Reports-Adherence Report-VEM audit-If an audit has updated with new date then it is not showing in the report Saradha Balan

04:35 PM Bug #15655 (Closed): Reports-Adherence Report-VEM audit-If an audit contains two commodities then only one commodity is alone showing in report

Reports-Adherence Report-VEM audit-If an audt contains two commodities then only one commodity is alone showing in re... Saradha Balan

02/11/2020

07:26 PM Bug #15467 (Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance

As of now we don't have any option to handle in build. It's need to be done by Suite team.
need to discuss with bi... Anonymous

02/10/2020

01:04 PM Bug #15467 (Not Resolved): Multi instance Report -> Audit Schedule / HQ and Moto Audit is not displaying the correct data based on mapped instance

Manual Insert is OK. But need to handled in build without any manual work. Raja S

02/07/2020

05:32 PM Bug #15356 (Closed): Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.

Anonymous

05:32 PM Bug #15356: Import Sheet: Primary address & Contact info -> we should give 0 or 1, it allow to enter 2 and above .We need a alert message.

Verified Anonymous

05:32 PM Bug #15429 (Closed): Report -> Audit - Repeat Non Conformance -> The graph is not showing the data based on Finding Status / Category - specific filtered data.

Closed Anonymous

11:58 AM Bug #15241 (Not Resolved): Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist

Anonymous

11:58 AM Bug #15241: Upon specifying the risk value of an Inactive risk description to a new risk value is not accepting,it shows risk value already exist

Still the issue occur Anonymous

11:51 AM Bug #15640 (Closed): Browser Issue:FireFox-New Cummins VAM Report-PDF view-View/alignment issue.Refer screen shot

Verified Anonymous

09:44 AM Bug #15643 (Open): Actions Menu: For the Created Single Action in DFMEA its displaying Multiple Actions in the same name in Actions Menu

User Admin

02/06/2020

05:53 PM Bug #15641 (Closed): My Dashboard issue: Please refer the description.

User Admin

05:11 PM Bug #15359 (Closed): Multi site: Email->Email link is not redirecting to correct location

Anonymous

05:10 PM Bug #15359: Multi site: Email->Email link is not redirecting to correct location

Verified by sara.Closing this issue Anonymous

05:06 PM Bug #15359 (Resolved): Multi site: Email->Email link is not redirecting to correct location

User Admin

11:32 AM Bug #15643 (Open): Actions Menu: For the Created Single Action in DFMEA its displaying Multiple Actions in the same name in Actions Menu

In the DFMEA if the User creating a Single Action and by viewing it in Actions Menu its displaying as Multiple Action... Anonymous

02/05/2020

05:59 PM Bug #15397 (Closed): Legend status as in Action plan is not displaying in Action status Instead system displays Pending and Completed

Verified in CY-9 and Closed Anonymous

03:51 PM Bug #15523 (Closed): ITAR document is going to NON ITAR Approver. PFB the scenario

Ragavi Ram

03:39 PM Bug #15630 (Reopen): New Document Draft - On viewing the particular document for the first time Server Error throws. But not able to replicate.

Ragavi Ram