Activity
From 04/16/2019 to 05/15/2019
05/15/2019
- 03:52 PM Bug #12237 (Closed): Duplicate functions, requirments and Failures are created while doing the following scenario(Refer description)
- "1.System automatically creates the duplicate function/Requirement/Failure after flowdown is done in both creation wi...
- 01:04 PM Bug #12219 (Closed): Aqua Reconciliation- Task not indending
- 12:02 PM Bug #12219 (Resolved): Aqua Reconciliation- Task not indending
- 12:01 PM Bug #12219 (Fixed with Hotfix): Aqua Reconciliation- Task not indending
- Issue with the browser. Not working on Explorer version 11.0.7.
Working fine on other systems. So closing the Issue. - 11:03 AM Bug #12219 (Open): Aqua Reconciliation- Task not indending
- 01:03 PM Bug #12080 (Closed): Regression: When clicking on Approved ECR form it shows document not published.
- 12:51 PM Bug #12216 (Fixed with Hotfix): Docpro attachment folder is not displaying
- 12:50 PM Bug #12216 (Resolved): Docpro attachment folder is not displaying
- 11:03 AM Bug #12216 (Open): Docpro attachment folder is not displaying
- 12:31 PM Bug #12137 (Closed): Preference - After changing the Default Language to Chinese and again to English, the design for the entire application is not good for that user alone.
- Closed in SP900 Cycle 9
- 12:21 PM Bug #12046 (Closed): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- issue verified in SP900 Cy-9
- 12:21 PM Bug #12046 (Resolved): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 12:21 PM Bug #11116 (Closed): Response date extension Alert to be renamed as "Please Enter the Requested Response Due Date Grater than Target Response Date "
- issue verified in Sp900 Cy-9
- 12:21 PM Bug #11116 (Resolved): Response date extension Alert to be renamed as "Please Enter the Requested Response Due Date Grater than Target Response Date "
- 11:55 AM Bug #12125 (Closed): IFM page is not opening. It displays loading for long time in Mozilla, Chrome and Edge Except in IE browser.
- Closed in SP900 Cycle 9
- 11:55 AM Bug #12125 (Resolved): IFM page is not opening. It displays loading for long time in Mozilla, Chrome and Edge Except in IE browser.
- 11:40 AM Bug #12028 (Closed): Blank DB - Documents - When Clicking on Document it showing error
- 11:40 AM Bug #12151 (Closed): Mushashi DB - When clicking Single page Toc in Documents Page, Documents are not loading properly and view count is showing 0
- 11:36 AM Bug #12230 (Closed): In Spotfire while logging in, if the user selects the option as Ewqims login, Application shows server error
- In Spotfire while logging in, if the user selects the option as Ewqims login, Application shows server error
- 11:36 AM Bug #11831 (Closed): IE: Main & Main2, By doing the Restore Changes for the Deleted Branch its displaying an Error Message
- This issue is fixed so closing this issue on 15.05.2019 in Cycle-9
- 11:32 AM Bug #12120 (Closed): IE & Chrome Browser: Main2, By Opening the Excel Sheet its showing as "Export to Excel is Failed"
- 11:32 AM Bug #12120 (Resolved): IE & Chrome Browser: Main2, By Opening the Excel Sheet its showing as "Export to Excel is Failed"
- 11:31 AM Bug #11521 (Closed): Website & Existing DB: Main2, In Picture Header by adding the existing image its displaying JS Error
- 11:05 AM Bug #12223 (Closed): IE & Chrome: Main & Main2, Publishing the Control Plan Document shows Error Message
- 11:04 AM Bug #12218 (Open): Musashi : Equipment Creation displays server error
05/14/2019
- 06:40 PM Bug #12091 (Closed): LPA : Not able to assign checklist to created assembly when clicked on Checklist to assigning displays server error
- Issue verified In sp900 CY-9
- 06:39 PM Bug #12091 (Resolved): LPA : Not able to assign checklist to created assembly when clicked on Checklist to assigning displays server error
- 06:39 PM Bug #11785 (Closed): Audit report ->Audit summary when clicked displays dual window.
- Issue verified in SP900 CY-9
- 06:35 PM Bug #12047 (Closed): LPA delete Template validation alert is not disabling when clicked
- issue verified in SP_900 Cy-9
- 06:35 PM Bug #12047 (Resolved): LPA delete Template validation alert is not disabling when clicked
- 06:33 PM Bug #12076 (Closed): LPA : when created equipment in equipment creation displays error and Checklist creation displays server error
- issue verified in Sp900 Cy-9
- 06:32 PM Bug #12076 (Resolved): LPA : when created equipment in equipment creation displays error and Checklist creation displays server error
- 06:32 PM Bug #12092 (Closed): LPA : Responsible person is not displaying to equipment even if it is mapped.
- issue verified in Sp900 Cy-9
- 06:32 PM Bug #12092 (Resolved): LPA : Responsible person is not displaying to equipment even if it is mapped.
- 06:26 PM Bug #12115 (Closed): AIAG VDA Design: In Interface Function Matrix,after clicking OK button in Select Context element dialog window, context element name is changed to some Numbers,
- Closed in SP900 Cycle 9
- 06:25 PM Bug #12134 (Closed): Block Diagram – Show Item Boundaries and Show Interface Type - System is allowing to edit the Non-editable fields. Also while double click on the Type, Target and Type of Interface columns, it displays JS error.
- Closed in Cycle 9
- 06:24 PM Bug #12160 (Closed): AIAG VDA Design - After double clicking the Text field on Add Function/Requirement/Failure dialog window, Text field is shrinking and while clicking outside, Text field is disappearing.
- 06:24 PM Bug #12160 (Resolved): AIAG VDA Design - After double clicking the Text field on Add Function/Requirement/Failure dialog window, Text field is shrinking and while clicking outside, Text field is disappearing.
- Closed in SP900 Cycle 9
- 06:21 PM Bug #12165 (Closed): Design VDA- After creating a Production item, system creates a blank Function/Requirement/Failure automatically. (Refer Description)
- Closed in Cycle 9
- 06:21 PM Bug #12165 (Resolved): Design VDA- After creating a Production item, system creates a blank Function/Requirement/Failure automatically. (Refer Description)
- 06:11 PM Bug #12226 (Closed): IE & Chrome: PQCT-1 is not working
- In PQCT-1, by doing the Right-Click option its displaying JS Error as "Line: 1166
Error: 'fnShowContext' is undefined" - 06:10 PM Bug #12225 (Closed): RFD and VDA PI - The BOM element created under any PI is not Displayed under Global - even if the Focus is in Global
- BOM element created under any PI is created as a child element for that PI in Parent part hierarchy even if the Focu...
- 06:03 PM Bug #12128 (Not Fixed with Hotfix): Create and Add elements - While selecting Create and Add elements(BOM) option, JS error is displayed when moving the mouse.
- Issue occurs while creating BOM for Subsystem level.(Refer screen shots)
- 05:48 PM Suggestion #12224 (Closed): Alert while adding same PI as BOM parent and PI table is not good.
- Alert can be changed. Issue occurs in VDA also.
- 05:47 PM Bug #12223 (Closed): IE & Chrome: Main & Main2, Publishing the Control Plan Document shows Error Message
- By Publishing the Control Plan Document its displaying an Error Message but its working for other Documents
- 05:41 PM Bug #12222 (Closed): Production item Table - Cannot Delete Production Item.
- Cannot Delete Production Item.
Issue occurs in FST and VDA also - 05:11 PM Bug #12221 (Closed): LPA : schedule is not getting created based on period duration for a selected period for equipment.
- schedule is not getting created based on period duration for a selected period for equipment.
schedule is getting cr... - 05:02 PM Bug #12113 (Not Resolved): IE & Chrome Main2: Picture Header, In the "Existing Image from DocPro" option the selected Picture is not displaying correctly
- This issue is not fixed so changing the status as Not Resolved on 14.05.2019 in Cycle-9
*NOTE:* This issue is work... - 04:56 PM Bug #12145 (Not Resolved): IE & Chrome: Main Asynchronous Publish Message is not same like the Main2 Asynchronous Publish Message
- This issue is not fixed so changing the status as Not Resolved on 14.05.2019 in Cycle-9
NOTE: The Issue is for Mai... - 04:56 PM Bug #12220 (Closed): LPA : Equipment is getting updated even after equipment responsible person is not mapped.
- Equipment is getting updated even after equipment responsible person is not mapped.
- 04:45 PM Bug #12099 (Closed): DB:Site is not visible in assign route
- issue verified in Sp900 Cy-9
- 12:00 PM Bug #12099 (Resolved): DB:Site is not visible in assign route
- 04:41 PM Bug #12122 (Closed): LPA : IN Layer Creation page Schedule is not creating based on Audit mode selection
- issue verified in SP_900 Cy-9
- 04:41 PM Bug #12122 (Resolved): LPA : IN Layer Creation page Schedule is not creating based on Audit mode selection
- 03:58 PM Bug #12219 (Closed): Aqua Reconciliation- Task not indending
- Aqua reconciliation is not working as expected in both Chrome and Explorer
(http://192.168.100.249/EwQIMS_Inst3). T... - 03:58 PM Bug #12131 (Not Resolved): Both IE and Chrome:Main & Main 2, Restore Changes is not working in Tables
- This issue is not fixed so changing the status as Not Resolved on 14.05.2019 in Cycle-9
- 03:56 PM Bug #12218 (Closed): Musashi : Equipment Creation displays server error
- Equipment Creation displays server error when clicked on existing record or as well as while trying to create new record
- 03:55 PM Bug #12135 (Not Resolved): Both IE and Chrome: Main & Main 2, Restore Changes is not working
- This issue is not fixed so changing the status as Not Resolved on 14.05.2019 in Cycle-9
- 03:54 PM Bug #12217 (Closed): Holiday List is not working as expected through social media layout
- Holiday List is not working as expected through social media layout
- 03:50 PM Bug #12116 (Closed): IE Main2: Hyperlinks, For all the Hyperlink by clicking on OK Button its displaying JS Error
- This issue is fixed so closing this issue on 14.05.2019 in Cycle-9
- 03:43 PM Bug #12028 (Not Resolved): Blank DB - Documents - When Clicking on Document it showing error
- When adding Power Point Documents it showing error
- 03:35 PM Bug #12156 (Closed): Social Media - New Document Request - When adding a document it shows error message
- 12:13 PM Bug #12156 (Resolved): Social Media - New Document Request - When adding a document it shows error message
- 03:31 PM Bug #12020 (Not Resolved): Document Management - Document Number is not sorting(It should sort when the doc number has only numbers also)
- 11:28 AM Bug #12020 (Resolved): Document Management - Document Number is not sorting(It should sort when the doc number has only numbers also)
- 03:26 PM Bug #12078 (Closed): Advanced search is not working. When clicking on search it shows error in IE and the page keeps on loading in all other browsers.Due to this issue, I couldn't verify the tag search report
- 10:32 AM Bug #12078 (Resolved): Advanced search is not working. When clicking on search it shows error in IE and the page keeps on loading in all other browsers.Due to this issue, I couldn't verify the tag search report
- 03:22 PM Bug #12157: IE Main2: Production Item Operation Flow in the Diagrams, by doing the Right-Click on the Link Options its displaying JS Error
- Issue was replicated and Please find the comment in the given Screenshot and do the same action it will help to repli...
- 03:05 PM Bug #12151 (Not Resolved): Mushashi DB - When clicking Single page Toc in Documents Page, Documents are not loading properly and view count is showing 0
- 12:13 PM Bug #12151 (Resolved): Mushashi DB - When clicking Single page Toc in Documents Page, Documents are not loading properly and view count is showing 0
- 02:23 PM Bug #12118 (Closed): Vision, Mission, Values & Quality Policy - Levels are not showing with Documents, When the user having Document Rights
- 02:23 PM Bug #12118 (Resolved): Vision, Mission, Values & Quality Policy - Levels are not showing with Documents, When the user having Document Rights
- 11:42 AM Bug #12118 (Fixed with Hotfix): Vision, Mission, Values & Quality Policy - Levels are not showing with Documents, When the user having Document Rights
- 02:21 PM Bug #12090 (Closed): Blank DB - Alignment Chart - Risk Form - View Action plan - After adding data in First row, cant able to delete the data
- 02:21 PM Bug #12090 (Reopen): Blank DB - Alignment Chart - Risk Form - View Action plan - After adding data in First row, cant able to delete the data
- 02:18 PM Bug #12090 (Closed): Blank DB - Alignment Chart - Risk Form - View Action plan - After adding data in First row, cant able to delete the data
- 02:18 PM Bug #12090 (Resolved): Blank DB - Alignment Chart - Risk Form - View Action plan - After adding data in First row, cant able to delete the data
- 02:18 PM Bug #12090 (Fixed with Hotfix): Blank DB - Alignment Chart - Risk Form - View Action plan - After adding data in First row, cant able to delete the data
- 12:34 PM Bug #12216 (Closed): Docpro attachment folder is not displaying
- The Output/Plan documents are not showing up in attach from Docpro.
- 12:21 PM Bug #12040 (Closed): Pandora DB: Tag search menu is not displayed(For Musashi db also)
- Checked in musashi db, and its working as expected in CY9
- 12:00 PM Bug #12040 (Resolved): Pandora DB: Tag search menu is not displayed(For Musashi db also)
- 12:19 PM Bug #12041 (Closed): Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- Closed in cy 9
- 12:16 PM Bug #12215 (Closed): Forms - Right Click menus are not displaying in all forms
- Right Click menus are not displaying in all forms
- 11:12 AM Bug #12085 (Resolved): Musashi DB: Auditor,Provisional auditor option not displayed for some audit cycle which has more 10 audit schedule
- 10:48 AM Bug #11768 (Resolved): Regression: While creating Production Item on the existing Production Item in PI table, It is created under global.
05/13/2019
- 08:46 PM Bug #12210 (Open): Equipment Spare part master -- Export -- It exporting the Die spare part details also.
- 03:29 PM Bug #12210 (Closed): Equipment Spare part master -- Export -- It exporting the Die spare part details also.
- Equipment Spare part master -- Export -- It exporting the Die spare part details also.
- 04:08 PM Bug #12129 (Resolved): After publish the EFC tree Diagram cause for the component level child element is not displayed in published document.
- 03:25 PM Bug #11763 (Resolved): EFC Tree when flow down is done for multiple child elements one element is displayed on EFC tree only after refreshing it shows all the elements.
- 03:24 PM Bug #11770 (Resolved): Regression: When the screen displays as select an option in requirement field, couldn't add function and requirement continuously.
- 03:17 PM Bug #12163 (Fixed with Hotfix): User Roles/Department worksheet:Search operation not working in Operator and Supervisor Pop-up
- 02:09 PM Bug #12163 (Resolved): User Roles/Department worksheet:Search operation not working in Operator and Supervisor Pop-up
- 03:16 PM Bug #12126 (Fixed with Hotfix): Documents are not getting attached in Inspection Template page
- 03:03 PM Bug #12120 (Fixed with Hotfix): IE & Chrome Browser: Main2, By Opening the Excel Sheet its showing as "Export to Excel is Failed"
- This is due to a wrong URL in the hyperlink added in the document.
- 02:54 PM Bug #11785 (Resolved): Audit report ->Audit summary when clicked displays dual window.
- 02:09 PM Suggestion #12162 (Resolved): Suggestion:Add/Delete/Update successfully message should start with caps
- 01:07 PM Bug #11768 (In Progress): Regression: While creating Production Item on the existing Production Item in PI table, It is created under global.
- 01:05 PM Bug #12134 (Resolved): Block Diagram – Show Item Boundaries and Show Interface Type - System is allowing to edit the Non-editable fields. Also while double click on the Type, Target and Type of Interface columns, it displays JS error.
- 12:59 PM Bug #12090 (Resolved): Blank DB - Alignment Chart - Risk Form - View Action plan - After adding data in First row, cant able to delete the data
- 12:53 PM Bug #12080: Regression: When clicking on Approved ECR form it shows document not published.
- not able to replicate
- 12:52 PM Bug #12080 (Resolved): Regression: When clicking on Approved ECR form it shows document not published.
- 12:49 PM Bug #12118 (Resolved): Vision, Mission, Values & Quality Policy - Levels are not showing with Documents, When the user having Document Rights
- 12:02 PM Bug #12115 (Resolved): AIAG VDA Design: In Interface Function Matrix,after clicking OK button in Select Context element dialog window, context element name is changed to some Numbers,
- 11:59 AM Bug #12115 (In Progress): AIAG VDA Design: In Interface Function Matrix,after clicking OK button in Select Context element dialog window, context element name is changed to some Numbers,
05/10/2019
- 10:21 PM Bug #12145 (Resolved): IE & Chrome: Main Asynchronous Publish Message is not same like the Main2 Asynchronous Publish Message
- fixed and patches provided for testing
- 10:07 PM Bug #11574 (Resolved): Reports: "Risk Reduction Rate" Report is not working when drill down the reports and clicking on Process Segment Link its displaying Blank Report
- 05:08 PM Bug #11574 (Not Resolved): Reports: "Risk Reduction Rate" Report is not working when drill down the reports and clicking on Process Segment Link its displaying Blank Report
- This issue is replicating now so changing the status as Not Resolved on 10.05.2019
- 05:07 PM Bug #11574 (Resolved): Reports: "Risk Reduction Rate" Report is not working when drill down the reports and clicking on Process Segment Link its displaying Blank Report
- 10:07 PM Bug #11575 (Resolved): Reports: Every Time "Access Denied" JS Error is displaying whenever the Report Menu Clicked and View Reports Clicked
- 10:07 PM Bug #11576 (Resolved): Reports: In the Tabular View, The Values are repeating more than 1 time in every column
- 10:07 PM Bug #11577 (Resolved): Reports: "Compliance with Due Dates of Recommended actions" Reports By Clicking on View Reports its displaying as "No Data Available"
- 09:40 PM Bug #12157: IE Main2: Production Item Operation Flow in the Diagrams, by doing the Right-Click on the Link Options its displaying JS Error
- Not able to replicate/ identify the same case. Please provide detailed steps
- 09:37 PM Bug #11831 (Resolved): IE: Main & Main2, By doing the Restore Changes for the Deleted Branch its displaying an Error Message
- Fixed and patches provided for testing
- 09:37 PM Bug #12131 (Resolved): Both IE and Chrome:Main & Main 2, Restore Changes is not working in Tables
- Fixed and patches provided for testing
- 09:37 PM Bug #12116 (Resolved): IE Main2: Hyperlinks, For all the Hyperlink by clicking on OK Button its displaying JS Error
- Fixed and patches provided for testing
- 09:36 PM Bug #12135 (Resolved): Both IE and Chrome: Main & Main 2, Restore Changes is not working
- Fixed and patches provided for testing
- 09:35 PM Bug #12113 (Resolved): IE & Chrome Main2: Picture Header, In the "Existing Image from DocPro" option the selected Picture is not displaying correctly
- Fixed and patches provided for testing
- 09:05 PM Bug #12159 (In Progress): Reports:PPM by characteristic report on clicking on any characteristic blank report is opening
- 05:24 PM Bug #12125 (Fixed with Hotfix): IFM page is not opening. It displays loading for long time in Mozilla, Chrome and Edge Except in IE browser.
- 05:23 PM Bug #12126 (Resolved): Documents are not getting attached in Inspection Template page
- 05:13 PM Bug #12128 (Fixed with Hotfix): Create and Add elements - While selecting Create and Add elements(BOM) option, JS error is displayed when moving the mouse.
- 05:09 PM Bug #12165 (Fixed with Hotfix): Design VDA- After creating a Production item, system creates a blank Function/Requirement/Failure automatically. (Refer Description)
- 05:09 PM Bug #12160 (Fixed with Hotfix): AIAG VDA Design - After double clicking the Text field on Add Function/Requirement/Failure dialog window, Text field is shrinking and while clicking outside, Text field is disappearing.
- 05:01 PM Bug #12180 (Open): Document Index report: When the parent folder is not in use and the child folder has documents, then its showing the documents twice in the table. Bar is also coming twice
- 12:08 PM Bug #12180 (Closed): Document Index report: When the parent folder is not in use and the child folder has documents, then its showing the documents twice in the table. Bar is also coming twice
- Document Index report: When the parent folder is not in use and the child folder has documents, then its showing the ...
- 04:54 PM Bug #11877 (Closed): Reports:JS error is showing on opening report for a single Production Item
- 04:43 PM Bug #12137 (Resolved): Preference - After changing the Default Language to Chinese and again to English, the design for the entire application is not good for that user alone.
- 04:34 PM Unit Level and Cosmetic Issues #12183 (Closed): LPA -> Equipment Tree-> Edit Equipment -> Success Message is not displayed while try to save after editing the equipment details
- 03:21 PM Unit Level and Cosmetic Issues #12183 (Closed): LPA -> Equipment Tree-> Edit Equipment -> Success Message is not displayed while try to save after editing the equipment details
- LPA -> Equipment Tree-> Edit Equipment -> Success Message is not displayed while try to save after editing the equipm...
- 02:14 PM Bug #11012 (Future Release): Risk - Severity rating added in Risk is not updated in DFMEA or PFMEA.
- Already included in SPrint 2 as development activity
- 12:13 PM Bug #12078 (Not Resolved): Advanced search is not working. When clicking on search it shows error in IE and the page keeps on loading in all other browsers.Due to this issue, I couldn't verify the tag search report
- 12:13 PM Bug #12078: Advanced search is not working. When clicking on search it shows error in IE and the page keeps on loading in all other browsers.Due to this issue, I couldn't verify the tag search report
- Due to this issue, I couldn't verify the tag search report
- 12:10 PM Bug #12026 (Closed): Tag index report: Shows error when clicking on Tag index report
- 12:10 PM Bug #12026 (Resolved): Tag index report: Shows error when clicking on Tag index report
- 12:10 PM Bug #12026 (Fixed with Hotfix): Tag index report: Shows error when clicking on Tag index report
05/09/2019
- 06:37 PM Bug #12158 (Resolved): Reports:In all Defect PPM reports Defect count and PPM count is displayed as Zero
- As informed the defects are calculated based on ngqty value which was developed post 900 . In order to incorporate th...
- 05:38 PM Bug #11565 (Fixed with Hotfix): Search functionality is not working.Search pop up is displayed in Incorrect location.
- Verified
- 12:31 PM Bug #11565 (Resolved): Search functionality is not working.Search pop up is displayed in Incorrect location.
- 05:33 PM Bug #11914 (Fixed with Hotfix): Pandora DB: Page is not redirect to correct location through email. While clicking the hyperlink it should redirect to correct location.
- Verified
- 04:55 PM Bug #12113 (In Progress): IE & Chrome Main2: Picture Header, In the "Existing Image from DocPro" option the selected Picture is not displaying correctly
- 04:55 PM Bug #12116 (In Progress): IE Main2: Hyperlinks, For all the Hyperlink by clicking on OK Button its displaying JS Error
- 04:52 PM Bug #12145 (In Progress): IE & Chrome: Main Asynchronous Publish Message is not same like the Main2 Asynchronous Publish Message
- 04:51 PM Bug #12157 (In Progress): IE Main2: Production Item Operation Flow in the Diagrams, by doing the Right-Click on the Link Options its displaying JS Error
- 03:50 PM Bug #12163 (In Progress): User Roles/Department worksheet:Search operation not working in Operator and Supervisor Pop-up
- 12:35 PM Bug #12163 (Open): User Roles/Department worksheet:Search operation not working in Operator and Supervisor Pop-up
- 03:49 PM Bug #12083 (In Progress): Displaying server error on opening charts
- 12:53 PM Bug #11116 (Fixed with Hotfix): Response date extension Alert to be renamed as "Please Enter the Requested Response Due Date Grater than Target Response Date "
- issue verified as HOtfix
- 12:46 PM Bug #11116 (Resolved): Response date extension Alert to be renamed as "Please Enter the Requested Response Due Date Grater than Target Response Date "
- 12:35 PM Bug #12165 (Open): Design VDA- After creating a Production item, system creates a blank Function/Requirement/Failure automatically. (Refer Description)
- 12:35 PM Bug #12160 (Open): AIAG VDA Design - After double clicking the Text field on Add Function/Requirement/Failure dialog window, Text field is shrinking and while clicking outside, Text field is disappearing.
- 12:29 PM Bug #12085 (In Progress): Musashi DB: Auditor,Provisional auditor option not displayed for some audit cycle which has more 10 audit schedule
- 11:44 AM Bug #12151 (Fixed with Hotfix): Mushashi DB - When clicking Single page Toc in Documents Page, Documents are not loading properly and view count is showing 0
- 11:37 AM Bug #12151 (Resolved): Mushashi DB - When clicking Single page Toc in Documents Page, Documents are not loading properly and view count is showing 0
- 11:44 AM Bug #12156 (Fixed with Hotfix): Social Media - New Document Request - When adding a document it shows error message
- 11:37 AM Bug #12156 (Resolved): Social Media - New Document Request - When adding a document it shows error message
- 11:40 AM Bug #12078 (Resolved): Advanced search is not working. When clicking on search it shows error in IE and the page keeps on loading in all other browsers.Due to this issue, I couldn't verify the tag search report
- 11:37 AM Bug #12041 (Resolved): Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
05/08/2019
- 05:54 PM Bug #12122 (Fixed with Hotfix): LPA : IN Layer Creation page Schedule is not creating based on Audit mode selection
- Issue verified as hot fix
- 03:36 PM Bug #12122 (Resolved): LPA : IN Layer Creation page Schedule is not creating based on Audit mode selection
- 05:35 PM Bug #12082 (Fixed with Hotfix): Musashi DB: PopUp does not open when it is tentative status
- Verified
- 01:17 PM Bug #12082 (Resolved): Musashi DB: PopUp does not open when it is tentative status
- 05:14 PM Bug #12165 (Closed): Design VDA- After creating a Production item, system creates a blank Function/Requirement/Failure automatically. (Refer Description)
- • After creating a Production item, system creates a blank Function/Requirement/Failure automatically.
• Verified fo... - 03:39 PM Bug #12163 (Closed): User Roles/Department worksheet:Search operation not working in Operator and Supervisor Pop-up
- User Roles/Department worksheet:Search operation not working in Operator and Supervisor Pop-up
- 03:22 PM Suggestion #12162 (Closed): Suggestion:Add/Delete/Update successfully message should start with caps
- Currently displaying as Add/Delete/Update successfully.Successfully should start with Caps
- 02:49 PM Bug #12160 (Closed): AIAG VDA Design - After double clicking the Text field on Add Function/Requirement/Failure dialog window, Text field is shrinking and while clicking outside, Text field is disappearing.
- • After double clicking the Text field on Add Function/Requirement/Failure dialog window, Text field is shrinking and...
- 02:44 PM Bug #12159 (Open): Reports:PPM by characteristic report on clicking on any characteristic blank report is opening
- 02:26 PM Bug #12159 (Closed): Reports:PPM by characteristic report on clicking on any characteristic blank report is opening
- Reports:PPM by characteristic report on clicking on any characteristic blank report is opening
- 02:44 PM Bug #12158 (Open): Reports:In all Defect PPM reports Defect count and PPM count is displayed as Zero
- 02:22 PM Bug #12158 (Closed): Reports:In all Defect PPM reports Defect count and PPM count is displayed as Zero
- Reports:In all Defect PPM reports Defect count and PPM count is displayed as Zero
- 02:44 PM Bug #12157 (Open): IE Main2: Production Item Operation Flow in the Diagrams, by doing the Right-Click on the Link Options its displaying JS Error
- 01:46 PM Bug #12157 (Closed): IE Main2: Production Item Operation Flow in the Diagrams, by doing the Right-Click on the Link Options its displaying JS Error
- Production Item Operation Flow in the Diagrams, Outside the box its having small box in that small box Bottom Right-S...
- 01:07 PM Bug #12046 (Fixed with Hotfix): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- issue verified as hot fix on 08/05/2019
- 12:58 PM Bug #12046 (Resolved): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 12:26 PM Bug #12046 (Not Fixed with Hotfix): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- Issue verified as Hot fix on 08-05-2019
- 10:59 AM Bug #12046 (Resolved): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 01:06 PM Bug #12156 (Open): Social Media - New Document Request - When adding a document it shows error message
- 11:35 AM Bug #12156 (Closed): Social Media - New Document Request - When adding a document it shows error message
- When adding a document it shows error message
- 12:47 PM Bug #12111 (Closed): Social Media: Perform audit details is not displayed, when we login as auditor
- 12:47 PM Bug #12111: Social Media: Perform audit details is not displayed, when we login as auditor
- Verified
- 12:05 PM Bug #12092 (Fixed with Hotfix): LPA : Responsible person is not displaying to equipment even if it is mapped.
- Issue verified as Hot fix on 08-05-2019
- 10:57 AM Bug #12092 (Resolved): LPA : Responsible person is not displaying to equipment even if it is mapped.
- as per the discussion with TPM team need to move the issue in 910
- 12:02 PM Bug #12091 (Fixed with Hotfix): LPA : Not able to assign checklist to created assembly when clicked on Checklist to assigning displays server error
- Issue verified as Hot fix on 08-05-2019
- 10:57 AM Bug #12091 (Resolved): LPA : Not able to assign checklist to created assembly when clicked on Checklist to assigning displays server error
- as per the discussion with TPM team need to move the issue in 910
- 12:01 PM Bug #12076 (Fixed with Hotfix): LPA : when created equipment in equipment creation displays error and Checklist creation displays server error
- Issue verified as Hot fix on 08-05-2019
- 10:56 AM Bug #12076 (Resolved): LPA : when created equipment in equipment creation displays error and Checklist creation displays server error
- as per the discussion with TPM team need to move the issue in 910
- 10:21 AM Bug #12047 (Fixed with Hotfix): LPA delete Template validation alert is not disabling when clicked
- 09:40 AM Bug #12151 (Open): Mushashi DB - When clicking Single page Toc in Documents Page, Documents are not loading properly and view count is showing 0
05/07/2019
- 06:17 PM Bug #12151 (Closed): Mushashi DB - When clicking Single page Toc in Documents Page, Documents are not loading properly and view count is showing 0
- When clicking Single page Toc in Documents Page, Documents are not loading properly and view count is showing 0
- 04:11 PM Bug #12145 (Open): IE & Chrome: Main Asynchronous Publish Message is not same like the Main2 Asynchronous Publish Message
- 01:49 PM Bug #12145 (Closed): IE & Chrome: Main Asynchronous Publish Message is not same like the Main2 Asynchronous Publish Message
- Main2 Asynchronous Publish Message is displaying as Paragraph but for Main Asynchronous Publish Message is displaying...
05/06/2019
- 08:34 PM Bug #12047 (Resolved): LPA delete Template validation alert is not disabling when clicked
- 08:12 PM Bug #12122 (In Progress): LPA : IN Layer Creation page Schedule is not creating based on Audit mode selection
- 06:08 PM Bug #12122 (Open): LPA : IN Layer Creation page Schedule is not creating based on Audit mode selection
- 03:27 PM Bug #12122 (Closed): LPA : IN Layer Creation page Schedule is not creating based on Audit mode selection
- LPA : IN Layer Creation page Schedule is not creating based on Audit mode selection
If I have selected mode as d... - 06:44 PM Bug #12137 (Open): Preference - After changing the Default Language to Chinese and again to English, the design for the entire application is not good for that user alone.
- 06:41 PM Bug #12137 (Closed): Preference - After changing the Default Language to Chinese and again to English, the design for the entire application is not good for that user alone.
- After changing the Default Language to Chinese and again to English, the design for the entire application is not goo...
- 06:18 PM Bug #12125 (Open): IFM page is not opening. It displays loading for long time in Mozilla, Chrome and Edge Except in IE browser.
- 04:46 PM Bug #12125 (Closed): IFM page is not opening. It displays loading for long time in Mozilla, Chrome and Edge Except in IE browser.
- IFM page is not opening. It displays loading for long time in Mozilla, Chrome and Edge Except in IE browser.
New I... - 06:17 PM Bug #12129 (Open): After publish the EFC tree Diagram cause for the component level child element is not displayed in published document.
- 04:56 PM Bug #12129 (Closed): After publish the EFC tree Diagram cause for the component level child element is not displayed in published document.
- After publish the EFC tree Diagram cause for the component level child element is not displayed in published document.
- 06:17 PM Bug #12136 (Open): Master Folder Tag - Created Folder Tag is not listed in the table.
- 06:15 PM Bug #12136 (Closed): Master Folder Tag - Created Folder Tag is not listed in the table.
- Created Folder Tag is not listed in the table.
- 06:17 PM Bug #12128 (Open): Create and Add elements - While selecting Create and Add elements(BOM) option, JS error is displayed when moving the mouse.
- 04:55 PM Bug #12128 (Closed): Create and Add elements - While selecting Create and Add elements(BOM) option, JS error is displayed when moving the mouse.
- Create and Add elements - While selecting Create and Add elements option, JS error is displayed when moving the mouse...
- 06:16 PM Bug #12134 (Open): Block Diagram – Show Item Boundaries and Show Interface Type - System is allowing to edit the Non-editable fields. Also while double click on the Type, Target and Type of Interface columns, it displays JS error.
- 05:28 PM Bug #12134 (Closed): Block Diagram – Show Item Boundaries and Show Interface Type - System is allowing to edit the Non-editable fields. Also while double click on the Type, Target and Type of Interface columns, it displays JS error.
- Block Diagram – Show Item Boundaries and Show Interface Type - System is allowing to edit the Non-editable fields. Al...
- 06:14 PM Bug #12130 (Open): Add/Remove Existing BOM elements - Unable to add PI as a BOM element.
- 04:59 PM Bug #12130 (Closed): Add/Remove Existing BOM elements - Unable to add PI as a BOM element.
- Unable to add some PI as a BOM element. Does not display checkboxes.
- 06:12 PM Bug #12120 (Open): IE & Chrome Browser: Main2, By Opening the Excel Sheet its showing as "Export to Excel is Failed"
- 03:08 PM Bug #12120 (Closed): IE & Chrome Browser: Main2, By Opening the Excel Sheet its showing as "Export to Excel is Failed"
- Open the PFMEA, Control Plan Document -> Select the Export to Excel in the Header by Right-Click on it and by Opening...
- 06:10 PM Bug #12131 (Open): Both IE and Chrome:Main & Main 2, Restore Changes is not working in Tables
- 05:04 PM Bug #12131 (Closed): Both IE and Chrome:Main & Main 2, Restore Changes is not working in Tables
- In the Tables by doing the Merge Dropdown Branches using Replace option and by Clicking on Restore Changes its displa...
- 06:09 PM Bug #12135 (Open): Both IE and Chrome: Main & Main 2, Restore Changes is not working
- 05:33 PM Bug #12135 (Closed): Both IE and Chrome: Main & Main 2, Restore Changes is not working
- In the Documents by doing the Restore Changes for the Modified and Deleted Branches its displaying Error Message.
- 06:01 PM Bug #12126 (Open): Documents are not getting attached in Inspection Template page
- 04:54 PM Bug #12126: Documents are not getting attached in Inspection Template page
- Was working in previous build.Seems it is a common issue for all Modules
- 04:52 PM Bug #12126 (Closed): Documents are not getting attached in Inspection Template page
- Documents are not getting attached in Inspection Template page
Attach from Local Machine is not working - 06:00 PM Bug #12119 (Open): Boss Forms - Objectives - When Clicking on Docpro Publish button, the page keeps on loading and no response
- 02:55 PM Bug #12119 (Closed): Boss Forms - Objectives - When Clicking on Docpro Publish button, the page keeps on loading and no response
- When Clicking on Docpro Publish button, the page keeps on loading and no response
- 05:14 PM Bug #11992 (Closed): Block Diagram/Item Boundaries -While double clicking on Type/Target/Type of Interface columns, JS error is displayed.(Refer Description)
- 05:14 PM Bug #11992 (Resolved): Block Diagram/Item Boundaries -While double clicking on Type/Target/Type of Interface columns, JS error is displayed.(Refer Description)
- 05:13 PM Bug #11606 (Closed): Block Diagram - Parent external element is displayed in different colour(Refer Description)
- 05:13 PM Bug #12111 (Resolved): Social Media: Perform audit details is not displayed, when we login as auditor
- 01:56 PM Bug #12111 (Open): Social Media: Perform audit details is not displayed, when we login as auditor
- 12:06 PM Bug #12111: Social Media: Perform audit details is not displayed, when we login as auditor
- http://192.168.100.12:81/redmine/issues/11357
- 11:43 AM Bug #12111 (Closed): Social Media: Perform audit details is not displayed, when we login as auditor
- Social Media: Perform status details is not displayed, when we login as an auditor
1) Login as Auditor
2) Set th... - 05:12 PM Bug #11622 (Closed): Block Diagram - While Pressing Insert in Interface types, JS error is displayed.(Refer Description)
- 05:12 PM Bug #11812 (Closed): Block Diagram(Item boundaries button) - In Scope check boxes in Item boundaries are editable.
- 05:11 PM Bug #11814 (Closed): Block Diagram - After removing the elements from In scope, then elements are displayed as external elements
- 05:11 PM Bug #11821 (Closed): Automate Diagram - While saving automate diagram system displays JS error. (Refer Screenshot)
- 05:09 PM Bug #11993 (Closed): FSR - Internal element which is at the Subsystem level is displayed as External in FSR document
- 05:09 PM Bug #11998 (Closed): IFM/Item Boundaries - Add/Remove elements dialog window is refreshed multiple times.
- 05:07 PM Bug #12037 (Closed): External element is displayed as internal element in block diagram.
- 05:07 PM Bug #12091 (In Progress): LPA : Not able to assign checklist to created assembly when clicked on Checklist to assigning displays server error
- 10:01 AM Bug #12091 (Open): LPA : Not able to assign checklist to created assembly when clicked on Checklist to assigning displays server error
- 05:05 PM Bug #12046 (In Progress): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 02:51 PM Bug #12118 (Open): Vision, Mission, Values & Quality Policy - Levels are not showing with Documents, When the user having Document Rights
- 02:12 PM Bug #12118 (Closed): Vision, Mission, Values & Quality Policy - Levels are not showing with Documents, When the user having Document Rights
- Levels are not showing with Documents, When the user having Document Rights
- 02:38 PM Bug #11768 (Not Resolved): Regression: While creating Production Item on the existing Production Item in PI table, It is created under global.
- 02:33 PM Bug #11987 (Closed): Advanced search: shows green colour full access for the integrated document, where as in TOC its not showing green colour icon
- 02:32 PM Bug #11315 (Closed): (Existing db)Social Media: The Gage which is in Pending for Calibration and also not initiated for GRR study(Variable and Attribute), showing in GRR widgets in Pending close out status
- 02:31 PM Bug #11380 (Closed): While clicking backward arrow continuously, even after login page system opens the previous login directly.
- Closed in SP900 Cycle 8
- 02:21 PM Bug #11314 (Closed): Cascade DB - Social Media - Firefox browser: After session time out, in dashboard it displaying 4 Login windows
- Closed in SP900 Cycle 8
- 02:20 PM Bug #11314 (Resolved): Cascade DB - Social Media - Firefox browser: After session time out, in dashboard it displaying 4 Login windows
- 02:18 PM Bug #11805 (Closed): After changing the password, system displays an error page along with a JS Error.(Refer Description)
- Closed in SP900 cycle 8.
- 01:56 PM Bug #12116 (Open): IE Main2: Hyperlinks, For all the Hyperlink by clicking on OK Button its displaying JS Error
- 01:00 PM Bug #12116 (Closed): IE Main2: Hyperlinks, For all the Hyperlink by clicking on OK Button its displaying JS Error
- Hyperlinks, In Main2 all the hyperlink for the selected Document or Image or Link its displaying JS Error by clicking...
- 01:56 PM Bug #12115 (Open): AIAG VDA Design: In Interface Function Matrix,after clicking OK button in Select Context element dialog window, context element name is changed to some Numbers,
- 12:59 PM Bug #12115 (Closed): AIAG VDA Design: In Interface Function Matrix,after clicking OK button in Select Context element dialog window, context element name is changed to some Numbers,
- This issue is reported earlier in Add/Remove elements.(#12000) Now it occurs in Select context element.
- 01:56 PM Bug #12113 (Open): IE & Chrome Main2: Picture Header, In the "Existing Image from DocPro" option the selected Picture is not displaying correctly
- 12:36 PM Bug #12113 (Closed): IE & Chrome Main2: Picture Header, In the "Existing Image from DocPro" option the selected Picture is not displaying correctly
- IE & Chrome Main2: Picture Header, In the "Existing Image from DocPro" option for the Selected Picture from the DocPr...
- 01:35 PM Bug #12024 (Closed): Possible cause in approver login when clicked on document number hyperlink displays some hidden button "Close" inside the form
- issue verified an Closed in Cy-8
- 01:35 PM Bug #12024 (Resolved): Possible cause in approver login when clicked on document number hyperlink displays some hidden button "Close" inside the form
- 01:21 PM Bug #11748 (Reopen): Action management when confirms the action displays window twice
- 10:05 AM Bug #11748 (Closed): Action management when confirms the action displays window twice
- issue verified and Closed in Cy-8
- 01:05 PM Bug #11877 (Yet to Verify): Reports:JS error is showing on opening report for a single Production Item
- 01:05 PM Bug #11877 (Resolved): Reports:JS error is showing on opening report for a single Production Item
- 01:03 PM Bug #11767 (Closed): AIAG VDA Design: In Interface Function Matrix,Elements are not displaying in IFM tables after selecting the Element from Add/Remove elements
- Closed in SP900 Cycle 8
- 01:02 PM Bug #11767 (Resolved): AIAG VDA Design: In Interface Function Matrix,Elements are not displaying in IFM tables after selecting the Element from Add/Remove elements
- 01:01 PM Bug #11994 (Closed): AIAG VDA Design: In Block Diagram,When click on show item boundaries an JS error is displaying on the screen
- Closed in SP900 Cycle 8
- 01:01 PM Bug #11994 (Resolved): AIAG VDA Design: In Block Diagram,When click on show item boundaries an JS error is displaying on the screen
- 01:01 PM Bug #11996 (Closed): AIAG VDA Design: In P-diagram,after selecting the element and then click on P-diagram JS error will display
- Closed in SP900 Cycle 8
- 01:00 PM Bug #11996 (Resolved): AIAG VDA Design: In P-diagram,after selecting the element and then click on P-diagram JS error will display
- 12:48 PM Bug #12000 (Closed): AIAG VDA Design: In Interface Function Matrix,After select the Add/Remove element,context element field data change to number
- Closed in Cycle 8
- 12:47 PM Bug #12000 (Resolved): AIAG VDA Design: In Interface Function Matrix,After select the Add/Remove element,context element field data change to number
- 12:40 PM Bug #12002 (Closed): AIAG VDA Design: In Failure Analysis,In table view when delete the blank branch continuously JS error will display
- Closed in SP900 Cycle 8
- 12:40 PM Bug #12002 (Resolved): AIAG VDA Design: In Failure Analysis,In table view when delete the blank branch continuously JS error will display
- 12:37 PM Bug #12031 (Closed): AIAG VDA Design & Process:In DFMEA/PFMEA, Reconcile with project planner tasks after select the phase and click on save button JS error is displaying
- Closed in SP900 Cycle 8
- 12:35 PM Bug #12003 (Closed): AIAG VDA both Design and Process: When Right click on tree view sort by ascending and sort by descending is displaying
- Closed in SP900 Cycle 8
- 12:35 PM Bug #12003 (Resolved): AIAG VDA both Design and Process: When Right click on tree view sort by ascending and sort by descending is displaying
- 12:33 PM Bug #12021 (Closed): AIAG VDA Process - Structure Analysis - When double click on 4M it get hide and after Refresh it is displaying
- Closed in SP900 Cycle 8
- 12:08 PM Bug #12021 (Resolved): AIAG VDA Process - Structure Analysis - When double click on 4M it get hide and after Refresh it is displaying
- 12:07 PM Bug #12027 (Closed): AIAG VDA Process - Failure Analysis -In Associate Design Failure when enter data in function JS error is displaying and cannot able to add Requirement and Failure in it.
- Closed in SP900 Cycle 8
- 12:07 PM Bug #12027 (Resolved): AIAG VDA Process - Failure Analysis -In Associate Design Failure when enter data in function JS error is displaying and cannot able to add Requirement and Failure in it.
- 11:52 AM Bug #12030 (Closed): AIAG VDA Design & Process:In DFMEA/PFMEA, Drag and Edit header issue
- Closed in SP900 Cycle 8
- 11:52 AM Bug #12030 (Resolved): AIAG VDA Design & Process:In DFMEA/PFMEA, Drag and Edit header issue
- 11:39 AM Bug #12034 (Closed): AIAG VDA Design & Process:In DFMEA/PFMEA, Right click on the header it is displaying preview publish
- Closed in SP900 Cycle 8
- 11:38 AM Bug #12034 (Resolved): AIAG VDA Design & Process:In DFMEA/PFMEA, Right click on the header it is displaying preview publish
- 11:35 AM Bug #12036 (Closed): Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents are not showing
- 11:18 AM Bug #11602 (Closed): LPA : When tentative audits are confirmed individually system displays validation as No audits to confirm even after schedules are available
- Issue verified and Closed in SP900 Cy-8
- 11:18 AM Bug #11602 (Resolved): LPA : When tentative audits are confirmed individually system displays validation as No audits to confirm even after schedules are available
- 10:06 AM Unit Level and Cosmetic Issues #11553 (Closed): LPA -> Equipment Tree-> Edit Equipment -> Success Message is not displayed while try to save after editing the equipment details
- issue verified and Closed in Cy-8
- 10:01 AM Bug #12100 (Open): Actions - Completed surveys are not getting closed
- 10:01 AM Bug #12099 (Open): DB:Site is not visible in assign route
- 10:01 AM Bug #12094 (Open): IE Browser:Displaying JS error on publishing documents
- 10:01 AM Bug #12093 (Open): LPA : when not confirm the schedules of the selected equipment schedules are not getting confirmed of some other equipment.
- 10:01 AM Bug #12092 (Open): LPA : Responsible person is not displaying to equipment even if it is mapped.
- 10:01 AM Bug #12090 (Open): Blank DB - Alignment Chart - Risk Form - View Action plan - After adding data in First row, cant able to delete the data
- 10:01 AM Bug #12085 (Open): Musashi DB: Auditor,Provisional auditor option not displayed for some audit cycle which has more 10 audit schedule
- 10:01 AM Bug #12083 (Open): Displaying server error on opening charts
- 10:01 AM Bug #12082 (Open): Musashi DB: PopUp does not open when it is tentative status
- 10:01 AM Bug #12080 (Open): Regression: When clicking on Approved ECR form it shows document not published.
- 10:01 AM Bug #12078 (Open): Advanced search is not working. When clicking on search it shows error in IE and the page keeps on loading in all other browsers.Due to this issue, I couldn't verify the tag search report
- 10:01 AM Bug #12076 (Open): LPA : when created equipment in equipment creation displays error and Checklist creation displays server error
- 10:01 AM Bug #12067 (Open): AIAG VDA Design & Process:In DFMEA/PFMEA, Reduce the size of the header or column header,then try to increase the size it will not get increase
05/03/2019
- 05:30 PM Bug #11122 (Closed): For Action owner change request no need to display "Approve with another date"
- Issue verified in CY-8
- 05:30 PM Bug #12019 (Closed): LPA : Filling checklist "Correction and Closeout" field as mandatory for Closeout the finding manually
- issue verified in CY-8
- 05:20 PM Bug #12011 (Closed): LPA : For Some Equipment Audit status is not displaying the auditee contact person detail through it is mapped to respective equipment.
- verified and Closed in Cy-8
- 05:19 PM Bug #12011 (Resolved): LPA : For Some Equipment Audit status is not displaying the auditee contact person detail through it is mapped to respective equipment.
- 05:12 PM Bug #12100 (Closed): Actions - Completed surveys are not getting closed
- Actions - Completed survey is not getting closed
- 04:35 PM Bug #12099 (Closed): DB:Site is not visible in assign route
- Site is not visible in assign route
1) Login as Administrator
2) Click the Assign route
3) See the action
Ac... - 02:59 PM Bug #12047 (Not Resolved): LPA delete Template validation alert is not disabling when clicked
- Alert is not disabling on first click on the validation.
- 02:58 PM Bug #12047 (Resolved): LPA delete Template validation alert is not disabling when clicked
- 02:53 PM Bug #12043 (Closed): LPA: When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according like "Machine" or "Production line"
- issue verified in Cy-8 and Closed
- 02:53 PM Bug #12043 (Resolved): LPA: When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according like "Machine" or "Production line"
- 02:13 PM Bug #12016 (Closed): IE & Chrome: Bulk Publish, By Clicking on Publish Button its not displaying the Published Successfully Message
- This issue is fixed so closing this issue on 03.05.2019
- 02:13 PM Bug #12016 (Resolved): IE & Chrome: Bulk Publish, By Clicking on Publish Button its not displaying the Published Successfully Message
- 02:12 PM Bug #12055 (Closed): IE & Chrome Browser: Main2, Document Search Functionality is not working as expected
- This issue is fixed so closing this issue on 03.05.2019
- 02:12 PM Bug #12055 (Resolved): IE & Chrome Browser: Main2, Document Search Functionality is not working as expected
- 02:10 PM Bug #12056 (Closed): IE Main2: Without the Document Open By doing the Document Search Functionality its displaying JS Error
- This issue is fixed so closing this issue on 03.05.2019
- 02:10 PM Bug #12056 (Resolved): IE Main2: Without the Document Open By doing the Document Search Functionality its displaying JS Error
- 01:02 PM Bug #11860 (Closed): IE Main2: Production Item Operation Flow in the Diagrams, by clicking on the Link Options(Arrow) or the Links its displaying JS Error
- This issue is fixed so closing this issue on 03.05.2019
- 01:00 PM Bug #11773 (Closed): IE & Chrome: Main & Main2, Severity and Occurrence Column of Revision State Branch is not working as per the Micron Revision State Branch
- This issue is fixed so closing this issue on 03.05.2019
- 11:50 AM Bug #12094 (Closed): IE Browser:Displaying JS error on publishing documents
- IE Browser:Displaying JS error on publishing documents.
Issue is only in IE browser.Same is working in other browsers - 11:20 AM Bug #11997 (Closed): Blank DB - Alignment Chart - Risk Form - View Action plan - Without adding a row, the row is getting deleted
- 11:19 AM Bug #12093: LPA : when not confirm the schedules of the selected equipment schedules are not getting confirmed of some other equipment.
- working fine in Last cycles
- 11:18 AM Bug #12093 (Closed): LPA : when not confirm the schedules of the selected equipment schedules are not getting confirmed of some other equipment.
- when not confirm the schedules of the selected equipment schedules are not getting confirmed of some other equipment....
- 10:22 AM Bug #12092: LPA : Responsible person is not displaying to equipment even if it is mapped.
- Working fine in last cycles
- 10:21 AM Bug #12092 (Closed): LPA : Responsible person is not displaying to equipment even if it is mapped.
- After responsible persons are mapped to equipment using two shifts and save the equipment.again retrieve the same eq...
- 10:09 AM Bug #12091: LPA : Not able to assign checklist to created assembly when clicked on Checklist to assigning displays server error
- working fine in last cycle
- 10:08 AM Bug #12091 (Closed): LPA : Not able to assign checklist to created assembly when clicked on Checklist to assigning displays server error
- For Assembly alone after creating Assembly when clicked on Checklist assigning to respective equipment displays serve...
- 09:54 AM Bug #12090 (Closed): Blank DB - Alignment Chart - Risk Form - View Action plan - After adding data in First row, cant able to delete the data
- After adding data in First row, cant able to delete the data
05/02/2019
- 06:37 PM Bug #12085: Musashi DB: Auditor,Provisional auditor option not displayed for some audit cycle which has more 10 audit schedule
- DB specification
- 06:31 PM Bug #12085 (Closed): Musashi DB: Auditor,Provisional auditor option not displayed for some audit cycle which has more 10 audit schedule
- Auditor, Provisional auditor option not displayed for some audit cycle which has more 10 audit schedule
- 06:03 PM Bug #12083: Displaying server error on opening charts
- Used to work in previous builds
- 06:03 PM Bug #12083 (Closed): Displaying server error on opening charts
- Displaying server error on opening charts
- 05:59 PM Bug #12082: Musashi DB: PopUp does not open when it is tentative status
- DB specification
- 05:58 PM Bug #12082 (Closed): Musashi DB: PopUp does not open when it is tentative status
- Musashi DB: Popup does not open when it is open tentative
- 05:53 PM Bug #12035 (Closed): Receiving Inspection:Unable to change status to completed /Unable to search for completed Inspections
- 05:53 PM Bug #12035 (Resolved): Receiving Inspection:Unable to change status to completed /Unable to search for completed Inspections
- 05:42 PM Bug #11817 (Closed): User enters Defect description for any characteristics and close the pop-up window without clicking on done.After opening the pop-up again the saved data is not showing
- 05:41 PM Bug #11817 (Resolved): User enters Defect description for any characteristics and close the pop-up window without clicking on done.After opening the pop-up again the saved data is not showing
- 05:22 PM Bug #11122 (Resolved): For Action owner change request no need to display "Approve with another date"
- 05:21 PM Bug #11905 (Closed): Search Inspection Entry:Data is not displaying if the preference data format is dd/mm/yy or yy/mm/dd
- 05:20 PM Bug #11905 (Resolved): Search Inspection Entry:Data is not displaying if the preference data format is dd/mm/yy or yy/mm/dd
- 05:11 PM Bug #12025 (Closed): IC Settings:By shift and By hours field values are not displaying during edit operation
- 05:11 PM Bug #12025 (Resolved): IC Settings:By shift and By hours field values are not displaying during edit operation
- 04:24 PM Bug #11997 (Yet to Verify): Blank DB - Alignment Chart - Risk Form - View Action plan - Without adding a row, the row is getting deleted
- 04:24 PM Bug #11997 (Resolved): Blank DB - Alignment Chart - Risk Form - View Action plan - Without adding a row, the row is getting deleted
- 04:23 PM Bug #12028 (Yet to Verify): Blank DB - Documents - When Clicking on Document it showing error
- 02:56 PM Bug #12036 (Not Resolved): Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents are not showing
- Cant verify since issue with advanced search
- 11:09 AM Bug #12036 (Resolved): Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents are not showing
- 02:55 PM Bug #12048 (Closed): Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the text box
- Working as designed
- 11:09 AM Bug #12048 (Resolved): Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the text box
- 02:50 PM Bug #12014 (Closed): Musashi DB - Doc Number Auto Increment - New Document Request - Document number is not auto incrementing and Document number getting duplicated not showing any error message
- 11:09 AM Bug #12014 (Resolved): Musashi DB - Doc Number Auto Increment - New Document Request - Document number is not auto incrementing and Document number getting duplicated not showing any error message
- 02:48 PM Bug #12017 (Closed): Document Auto Increment - New Document Request - Cannot able to continue testing when two auto increment documents added with same document number and not getting the EWQIMS site for further testing
- 11:09 AM Bug #12017 (Resolved): Document Auto Increment - New Document Request - Cannot able to continue testing when two auto increment documents added with same document number and not getting the EWQIMS site for further testing
- 02:47 PM Bug #12020 (Not Resolved): Document Management - Document Number is not sorting(It should sort when the doc number has only numbers also)
- 11:09 AM Bug #12020 (Resolved): Document Management - Document Number is not sorting(It should sort when the doc number has only numbers also)
- 02:13 PM Bug #11555 (Closed): IE Browser:Displaying JS error on opening Docpro home page.occurs when the normal user tries to open the doc pro module error occurs in the below menus which has level tree
- closed in cy 8
- 11:09 AM Bug #11555 (Resolved): IE Browser:Displaying JS error on opening Docpro home page.occurs when the normal user tries to open the doc pro module error occurs in the below menus which has level tree
- 02:11 PM Bug #11536 (Closed): Tag Index report: Tag index report should display only for the module admins Tag search menu should not be displayed for administrator
- closed in cy8
- 02:02 PM Bug #11536 (Yet to Verify): Tag Index report: Tag index report should display only for the module admins Tag search menu should not be displayed for administrator
- 11:09 AM Bug #11536 (Resolved): Tag Index report: Tag index report should display only for the module admins Tag search menu should not be displayed for administrator
- 02:02 PM Bug #11971 (Closed): Folder Mgmt and New document req: When the document number is set as use internal id as doc number, then the doc num should be a non editable field in New document req
- Closed in CY8
- 11:09 AM Bug #11971 (Resolved): Folder Mgmt and New document req: When the document number is set as use internal id as doc number, then the doc num should be a non editable field in New document req
- 01:50 PM Bug #11987 (Not Resolved): Advanced search: shows green colour full access for the integrated document, where as in TOC its not showing green colour icon
- Due to issue in advanced search, i couldn't able to verify this issue
- 11:09 AM Bug #11987 (Resolved): Advanced search: shows green colour full access for the integrated document, where as in TOC its not showing green colour icon
- 12:46 PM Bug #12080 (Closed): Regression: When clicking on Approved ECR form it shows document not published.
- Regression: When clicking on Approved ECR form it shows document not published
- 12:45 PM Bug #11475 (Closed): Regression: When clicking on Approved ECR form it shows document not published.
- 12:40 PM Bug #11475: Regression: When clicking on Approved ECR form it shows document not published.
- Issue Replicated.
- 12:40 PM Bug #11475 (Reopen): Regression: When clicking on Approved ECR form it shows document not published.
- 12:39 PM Bug #12046 (Not Resolved): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 12:38 PM Bug #12046 (Resolved): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 11:58 AM Bug #12078: Advanced search is not working. When clicking on search it shows error in IE and the page keeps on loading in all other browsers.Due to this issue, I couldn't verify the tag search report
- Worked as expected in previous cycle
- 11:58 AM Bug #12078 (Closed): Advanced search is not working. When clicking on search it shows error in IE and the page keeps on loading in all other browsers.Due to this issue, I couldn't verify the tag search report
- Advanced search is not working. When clicking on search it shows error in IE and the page keeps on loading in all oth...
- 11:19 AM Bug #12040 (Not Resolved): Pandora DB: Tag search menu is not displayed(For Musashi db also)
- pandora db is not there, so Verified in Musashi db. and the issue still persists in musashi db,, Is it db specific fi...
- 11:09 AM Bug #12041 (Not Resolved): Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- 11:09 AM Bug #12041 (Resolved): Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- 11:06 AM Bug #12076 (Closed): LPA : when created equipment in equipment creation displays error and Checklist creation displays server error
- when created equipment in equipment creation displays error and Checklist creation displays server error
- 10:55 AM Bug #12023 (Closed): Created remainder frequency is not listed in the drop down or else it is not visible to select.Because creating again with the same name it shows alert.
- Issue Closed on 2/5/2019
- 10:40 AM Bug #12045: Social Media Layout: Action count is not updated properly.
- Fixed in Cy 8
- 10:40 AM Bug #12045 (Closed): Social Media Layout: Action count is not updated properly.
- 10:40 AM Bug #12045 (Resolved): Social Media Layout: Action count is not updated properly.
04/30/2019
04/29/2019
- 08:55 PM Bug #11797 (Resolved): Pandora:Automatically window need to close after file upload.Alert message is incorrect after delete.
- Duplicate issue 11566
- 08:53 PM Bug #12019 (Resolved): LPA : Filling checklist "Correction and Closeout" field as mandatory for Closeout the finding manually
- 08:46 PM Unit Level and Cosmetic Issues #11553 (Resolved): LPA -> Equipment Tree-> Edit Equipment -> Success Message is not displayed while try to save after editing the equipment details
- 08:37 PM Bug #11748 (Resolved): Action management when confirms the action displays window twice
- unable to replicate the issue
- 04:17 PM Bug #11780 (Closed): Yazaki db: Business Rule: When clicking on Reminder tab, it displays blank screen
- 03:56 PM Bug #11780 (Resolved): Yazaki db: Business Rule: When clicking on Reminder tab, it displays blank screen
- 03:35 PM Bug #11000: Cascade DB: Project Planner( gantt Page is displayed blank) Deliverable list screen
- Closed in Abatek DB
- 03:33 PM Bug #11003: Cascade DB: Clicking on risk icon in the template it is not displaying the risk data in the form.
- Closed in Abatek DB
- 03:32 PM Bug #11004: Cascade DB: Template Gantt page is displaying blank for the template name "Szerszám tervezés és gyártás (belso) / Tool design and manufacturing (internal)"
- Issue Closed
- 03:28 PM Bug #11006: Cascade DB: Selecting resource in the deliverable info for input attachment it shows resource name multiple times for same resource in the dropdown.
- Issue Closed
- 03:27 PM Bug #11007: Cascade DB: DocPro Actions are listed in the APQP Actions page under action menu.
- Issue Closed
- 03:25 PM Bug #11008: Cascade DB" My deliverable list displayed blank for the project APQP 2331-000-15 #17013
- Issue Closed
- 03:23 PM Bug #11011: Cascade DB: Project Export to XMl it shows Error(Inside the project planner)
- Issue Closed
- 03:23 PM Bug #12031 (Resolved): AIAG VDA Design & Process:In DFMEA/PFMEA, Reconcile with project planner tasks after select the phase and click on save button JS error is displaying
- 03:21 PM Bug #11204: Regression: (John DB) When trying to open the existing program and Template it shows blank gantt page.
- Issue Closed
- 03:01 PM Bug #11860 (Resolved): IE Main2: Production Item Operation Flow in the Diagrams, by clicking on the Link Options(Arrow) or the Links its displaying JS Error
- Fixed and patches provided for Build
- 02:58 PM Bug #11773 (Resolved): IE & Chrome: Main & Main2, Severity and Occurrence Column of Revision State Branch is not working as per the Micron Revision State Branch
- Fixed and patches provided for 9.0.0 Build
- 02:53 PM Bug #11898 (Yet to Verify): In PPM Reports,for In-process PI's not able to capture defect quantity count against a PI,but the same is captured against each characteristics
- 01:07 PM Bug #11898 (Resolved): In PPM Reports,for In-process PI's not able to capture defect quantity count against a PI,but the same is captured against each characteristics
- 11:53 AM Bug #12028 (Resolved): Blank DB - Documents - When Clicking on Document it showing error
- not an issue
04/26/2019
- 07:58 PM Bug #11821 (Resolved): Automate Diagram - While saving automate diagram system displays JS error. (Refer Screenshot)
- 04:33 PM Bug #12046 (Fixed with Hotfix): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 03:44 PM Bug #12046 (Resolved): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 04:31 PM Bug #11606 (Resolved): Block Diagram - Parent external element is displayed in different colour(Refer Description)
- 04:30 PM Bug #11814 (Resolved): Block Diagram - After removing the elements from In scope, then elements are displayed as external elements
- 04:30 PM Bug #12037 (Resolved): External element is displayed as internal element in block diagram.
- 10:11 AM Bug #12037 (In Progress): External element is displayed as internal element in block diagram.
- 03:22 PM Bug #12043 (Fixed with Hotfix): LPA: When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according like "Machine" or "Production line"
- 03:20 PM Bug #12043 (Resolved): LPA: When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according like "Machine" or "Production line"
- 03:22 PM Bug #12011 (Fixed with Hotfix): LPA : For Some Equipment Audit status is not displaying the auditee contact person detail through it is mapped to respective equipment.
- 03:19 PM Bug #12011 (Resolved): LPA : For Some Equipment Audit status is not displaying the auditee contact person detail through it is mapped to respective equipment.
- 03:21 PM Bug #11602 (Fixed with Hotfix): LPA : When tentative audits are confirmed individually system displays validation as No audits to confirm even after schedules are available
- 03:20 PM Bug #11602 (Resolved): LPA : When tentative audits are confirmed individually system displays validation as No audits to confirm even after schedules are available
- 01:14 PM Bug #11823 (Fixed with Hotfix): Yazaki DB : Assigned Checklist and Checkpoints are not displayed when edited and View twice
- 01:03 PM Bug #11823 (Resolved): Yazaki DB : Assigned Checklist and Checkpoints are not displayed when edited and View twice
04/25/2019
- 08:59 PM Bug #12046 (In Progress): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 07:14 PM Bug #12011 (In Progress): LPA : For Some Equipment Audit status is not displaying the auditee contact person detail through it is mapped to respective equipment.
- 06:54 PM Bug #11797 (In Progress): Pandora:Automatically window need to close after file upload.Alert message is incorrect after delete.
- 05:49 PM Bug #11774 (Fixed with Hotfix): Pandora:Audit cycle name is incorrect Annual schedule page.
- 05:49 PM Bug #11774: Pandora:Audit cycle name is incorrect Annual schedule page.
- Verified
- 01:29 PM Bug #11774 (Resolved): Pandora:Audit cycle name is incorrect Annual schedule page.
- 05:43 PM Bug #11799 (Fixed with Hotfix): Yazaki : When clicked on Assign routes hyperlink in actual audit creation created from annual audit plan displays error.
- 05:39 PM Bug #11799 (Resolved): Yazaki : When clicked on Assign routes hyperlink in actual audit creation created from annual audit plan displays error.
- 05:42 PM Bug #11122 (Fixed with Hotfix): For Action owner change request no need to display "Approve with another date"
- 01:29 PM Bug #11122 (Resolved): For Action owner change request no need to display "Approve with another date"
- 05:39 PM Bug #12040 (Resolved): Pandora DB: Tag search menu is not displayed(For Musashi db also)
- 05:39 PM Bug #11314 (Resolved): Cascade DB - Social Media - Firefox browser: After session time out, in dashboard it displaying 4 Login windows
- 05:33 PM Bug #12067 (Closed): AIAG VDA Design & Process:In DFMEA/PFMEA, Reduce the size of the header or column header,then try to increase the size it will not get increase
- When we reduce the size of the header and column header then try to increase its size it will not get increase.header...
- 01:29 PM Bug #11914 (Resolved): Pandora DB: Page is not redirect to correct location through email. While clicking the hyperlink it should redirect to correct location.
- 01:12 PM Bug #11536 (Fixed with Hotfix): Tag Index report: Tag index report should display only for the module admins Tag search menu should not be displayed for administrator
- 01:03 PM Bug #11536 (Resolved): Tag Index report: Tag index report should display only for the module admins Tag search menu should not be displayed for administrator
- 12:57 PM Bug #11987 (Fixed with Hotfix): Advanced search: shows green colour full access for the integrated document, where as in TOC its not showing green colour icon
- 12:53 PM Bug #11987 (Resolved): Advanced search: shows green colour full access for the integrated document, where as in TOC its not showing green colour icon
- its working
- 11:44 AM Bug #12055 (Fixed with Hotfix): IE & Chrome Browser: Main2, Document Search Functionality is not working as expected
- This issue is fixed so changing the status as Fixed with Hotfix
- 10:31 AM Bug #11994 (Fixed with Hotfix): AIAG VDA Design: In Block Diagram,When click on show item boundaries an JS error is displaying on the screen
- 10:31 AM Bug #11996 (Fixed with Hotfix): AIAG VDA Design: In P-diagram,after selecting the element and then click on P-diagram JS error will display
- 10:31 AM Bug #12000 (Fixed with Hotfix): AIAG VDA Design: In Interface Function Matrix,After select the Add/Remove element,context element field data change to number
- 09:45 AM Bug #12024 (Fixed with Hotfix): Possible cause in approver login when clicked on document number hyperlink displays some hidden button "Close" inside the form
04/24/2019
- 06:22 PM Bug #11817 (Fixed with Hotfix): User enters Defect description for any characteristics and close the pop-up window without clicking on done.After opening the pop-up again the saved data is not showing
- 06:20 PM Bug #11555 (Fixed with Hotfix): IE Browser:Displaying JS error on opening Docpro home page.occurs when the normal user tries to open the doc pro module error occurs in the below menus which has level tree
- 03:09 PM Bug #11555 (Resolved): IE Browser:Displaying JS error on opening Docpro home page.occurs when the normal user tries to open the doc pro module error occurs in the below menus which has level tree
- 06:17 PM Bug #11993 (Resolved): FSR - Internal element which is at the Subsystem level is displayed as External in FSR document
- 06:04 PM Bug #11987 (Not Fixed with Hotfix): Advanced search: shows green colour full access for the integrated document, where as in TOC its not showing green colour icon
- Integrated docs itself is not displayed
- 05:55 PM Bug #11805 (Resolved): After changing the password, system displays an error page along with a JS Error.(Refer Description)
- 05:54 PM Bug #12023 (Resolved): Created remainder frequency is not listed in the drop down or else it is not visible to select.Because creating again with the same name it shows alert.
- 05:53 PM Bug #11380 (Resolved): While clicking backward arrow continuously, even after login page system opens the previous login directly.
- 05:02 PM Bug #11992 (Fixed with Hotfix): Block Diagram/Item Boundaries -While double clicking on Type/Target/Type of Interface columns, JS error is displayed.(Refer Description)
- 04:52 PM Bug #11992: Block Diagram/Item Boundaries -While double clicking on Type/Target/Type of Interface columns, JS error is displayed.(Refer Description)
- Not Replicated
- 04:46 PM Bug #12024 (Resolved): Possible cause in approver login when clicked on document number hyperlink displays some hidden button "Close" inside the form
- 04:45 PM Bug #11994 (Resolved): AIAG VDA Design: In Block Diagram,When click on show item boundaries an JS error is displaying on the screen
- 10:28 AM Bug #11994: AIAG VDA Design: In Block Diagram,When click on show item boundaries an JS error is displaying on the screen
- This issue is working fine so i am closing this issue
- 04:44 PM Bug #11996 (Resolved): AIAG VDA Design: In P-diagram,after selecting the element and then click on P-diagram JS error will display
- 10:28 AM Bug #11996: AIAG VDA Design: In P-diagram,after selecting the element and then click on P-diagram JS error will display
- This issue is working fine so i am closing this issue
- 04:44 PM Bug #11998 (Resolved): IFM/Item Boundaries - Add/Remove elements dialog window is refreshed multiple times.
- 04:44 PM Bug #12000 (Resolved): AIAG VDA Design: In Interface Function Matrix,After select the Add/Remove element,context element field data change to number
- 10:27 AM Bug #12000: AIAG VDA Design: In Interface Function Matrix,After select the Add/Remove element,context element field data change to number
- It is fixed so i make it as fixed with hot fix
- 03:07 PM Bug #11536 (Not Fixed with Hotfix): Tag Index report: Tag index report should display only for the module admins Tag search menu should not be displayed for administrator
- 02:12 PM Bug #12003 (Fixed with Hotfix): AIAG VDA both Design and Process: When Right click on tree view sort by ascending and sort by descending is displaying
- 12:19 PM Bug #12003 (Resolved): AIAG VDA both Design and Process: When Right click on tree view sort by ascending and sort by descending is displaying
- 10:27 AM Bug #12003: AIAG VDA both Design and Process: When Right click on tree view sort by ascending and sort by descending is displaying
- This issue is working fine so i am closing this issue
- 02:12 PM Bug #12002 (Fixed with Hotfix): AIAG VDA Design: In Failure Analysis,In table view when delete the blank branch continuously JS error will display
- 12:19 PM Bug #12002 (Resolved): AIAG VDA Design: In Failure Analysis,In table view when delete the blank branch continuously JS error will display
- 10:27 AM Bug #12002: AIAG VDA Design: In Failure Analysis,In table view when delete the blank branch continuously JS error will display
- This issue is working fine so i am closing this issue
- 02:10 PM Bug #11905 (Fixed with Hotfix): Search Inspection Entry:Data is not displaying if the preference data format is dd/mm/yy or yy/mm/dd
- 02:05 PM Bug #12035 (Fixed with Hotfix): Receiving Inspection:Unable to change status to completed /Unable to search for completed Inspections
- 11:58 AM Bug #12035 (Resolved): Receiving Inspection:Unable to change status to completed /Unable to search for completed Inspections
- 02:05 PM Bug #12041 (Fixed with Hotfix): Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- 02:04 PM Bug #12045 (Fixed with Hotfix): Social Media Layout: Action count is not updated properly.
- 01:57 PM Bug #12025 (Fixed with Hotfix): IC Settings:By shift and By hours field values are not displaying during edit operation
- 12:43 PM Bug #11971 (Fixed with Hotfix): Folder Mgmt and New document req: When the document number is set as use internal id as doc number, then the doc num should be a non editable field in New document req
- 12:26 PM Bug #11768 (Resolved): Regression: While creating Production Item on the existing Production Item in PI table, It is created under global.
- 12:25 PM Bug #11812 (Resolved): Block Diagram(Item boundaries button) - In Scope check boxes in Item boundaries are editable.
- 12:24 PM Bug #12014 (Fixed with Hotfix): Musashi DB - Doc Number Auto Increment - New Document Request - Document number is not auto incrementing and Document number getting duplicated not showing any error message
- 12:24 PM Bug #12017 (Fixed with Hotfix): Document Auto Increment - New Document Request - Cannot able to continue testing when two auto increment documents added with same document number and not getting the EWQIMS site for further testing
- 12:19 PM Bug #12055 (Resolved): IE & Chrome Browser: Main2, Document Search Functionality is not working as expected
- 12:16 PM Bug #12020 (Fixed with Hotfix): Document Management - Document Number is not sorting(It should sort when the doc number has only numbers also)
- 12:12 PM Bug #12034 (Fixed with Hotfix): AIAG VDA Design & Process:In DFMEA/PFMEA, Right click on the header it is displaying preview publish
- This issue is fixed so i am closing this issue
- 12:12 PM Bug #12048 (Fixed with Hotfix): Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the text box
- 12:11 PM Bug #12048 (Resolved): Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the text box
- 11:52 AM Bug #12048 (Not Fixed with Hotfix): Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the text box
- 12:03 PM Bug #12036 (Fixed with Hotfix): Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents are not showing
- 11:48 AM Bug #11602 (Reopen): LPA : When tentative audits are confirmed individually system displays validation as No audits to confirm even after schedules are available
- 10:23 AM Bug #12027 (Fixed with Hotfix): AIAG VDA Process - Failure Analysis -In Associate Design Failure when enter data in function JS error is displaying and cannot able to add Requirement and Failure in it.
04/23/2019
- 05:35 PM Bug #12048 (Resolved): Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the text box
- 03:20 PM Bug #12048 (In Progress): Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the text box
- 05:35 PM Bug #11536 (Resolved): Tag Index report: Tag index report should display only for the module admins Tag search menu should not be displayed for administrator
- 04:09 PM Bug #11536 (In Progress): Tag Index report: Tag index report should display only for the module admins Tag search menu should not be displayed for administrator
- 05:35 PM Bug #11971 (Resolved): Folder Mgmt and New document req: When the document number is set as use internal id as doc number, then the doc num should be a non editable field in New document req
- 05:34 PM Bug #11987 (Resolved): Advanced search: shows green colour full access for the integrated document, where as in TOC its not showing green colour icon
- 09:45 AM Bug #11987 (In Progress): Advanced search: shows green colour full access for the integrated document, where as in TOC its not showing green colour icon
- 05:34 PM Bug #12014 (Resolved): Musashi DB - Doc Number Auto Increment - New Document Request - Document number is not auto incrementing and Document number getting duplicated not showing any error message
- 03:38 PM Bug #12014 (In Progress): Musashi DB - Doc Number Auto Increment - New Document Request - Document number is not auto incrementing and Document number getting duplicated not showing any error message
- 05:34 PM Bug #12017 (Resolved): Document Auto Increment - New Document Request - Cannot able to continue testing when two auto increment documents added with same document number and not getting the EWQIMS site for further testing
- 03:38 PM Bug #12017 (In Progress): Document Auto Increment - New Document Request - Cannot able to continue testing when two auto increment documents added with same document number and not getting the EWQIMS site for further testing
- 05:34 PM Bug #12020 (Resolved): Document Management - Document Number is not sorting(It should sort when the doc number has only numbers also)
- 09:45 AM Bug #12020 (In Progress): Document Management - Document Number is not sorting(It should sort when the doc number has only numbers also)
- 05:34 PM Bug #12036 (Resolved): Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents are not showing
- 09:41 AM Bug #12036 (In Progress): Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents are not showing
- 05:34 PM Bug #12045 (Resolved): Social Media Layout: Action count is not updated properly.
- 03:36 PM Bug #12045 (In Progress): Social Media Layout: Action count is not updated properly.
- 05:34 PM Bug #12041 (Resolved): Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- 09:41 AM Bug #12041 (In Progress): Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- 05:01 PM Bug #11913 (Closed): Pandora:Audit cycle document -> The approver could response for terminated audit cycle document
- Verified on 25/4/2019
- 05:00 PM Bug #12027 (Resolved): AIAG VDA Process - Failure Analysis -In Associate Design Failure when enter data in function JS error is displaying and cannot able to add Requirement and Failure in it.
- 04:56 PM Bug #11910 (Closed): Pandora:Some of the audit pro Email Interrupted
- 04:55 PM Bug #11910: Pandora:Some of the audit pro Email Interrupted
- Verified
- 04:28 PM Bug #11785 (TBD): Audit report ->Audit summary when clicked displays dual window.
- 04:27 PM Bug #11785 (Open): Audit report ->Audit summary when clicked displays dual window.
- 04:16 PM Bug #11785 (Not Resolved): Audit report ->Audit summary when clicked displays dual window.
- 04:16 PM Bug #11785: Audit report ->Audit summary when clicked displays dual window.
- This is an issue, Need only one Text area to enter the data , not needed two Body area to enter the data
- 04:21 PM Bug #12043 (Not Fixed with Hotfix): LPA: When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according like "Machine" or "Production line"
- 03:04 PM Bug #12046 (Not Fixed with Hotfix): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 03:02 PM Bug #11767 (Fixed with Hotfix): AIAG VDA Design: In Interface Function Matrix,Elements are not displaying in IFM tables after selecting the Element from Add/Remove elements
- 11:07 AM Bug #11767 (Resolved): AIAG VDA Design: In Interface Function Matrix,Elements are not displaying in IFM tables after selecting the Element from Add/Remove elements
- 02:09 PM Bug #12021 (Fixed with Hotfix): AIAG VDA Process - Structure Analysis - When double click on 4M it get hide and after Refresh it is displaying
- 12:36 PM Bug #12047 (Fixed with Hotfix): LPA delete Template validation alert is not disabling when clicked
- 11:55 AM Bug #12030 (Fixed with Hotfix): AIAG VDA Design & Process:In DFMEA/PFMEA, Drag and Edit header issue
- 10:57 AM Bug #11993 (In Progress): FSR - Internal element which is at the Subsystem level is displayed as External in FSR document
- 10:38 AM Bug #12056 (Fixed with Hotfix): IE Main2: Without the Document Open By doing the Document Search Functionality its displaying JS Error
- This issue is fixed so changing the status as Fixed with Hotfix
- 10:38 AM Bug #12055 (Not Fixed with Hotfix): IE & Chrome Browser: Main2, Document Search Functionality is not working as expected
- This issue is still replicating so changing the status as Not Fixed with Hotfix
- 10:35 AM Bug #12016 (Fixed with Hotfix): IE & Chrome: Bulk Publish, By Clicking on Publish Button its not displaying the Published Successfully Message
- This issue is fixed so changing the status as Fixed with Hotfix
- 10:34 AM Bug #11788 (Closed): AIAG VDA Design & Process:In DFMEA/PFMEA,When we Insert the column it will display in AQuA Pro format not in VDA format
04/22/2019
- 09:39 PM Bug #11788: AIAG VDA Design & Process:In DFMEA/PFMEA,When we Insert the column it will display in AQuA Pro format not in VDA format
- Color will not be applicable for insert column user must use the set font option to set the format color on the colum...
- 09:35 PM Bug #12030 (Resolved): AIAG VDA Design & Process:In DFMEA/PFMEA, Drag and Edit header issue
- Fixed and patches provided for hotfixs testing.
- 09:34 PM Bug #12055 (Resolved): IE & Chrome Browser: Main2, Document Search Functionality is not working as expected
- Fixed and patches provided for hotfixs testing.
- 09:33 PM Bug #12055 (Open): IE & Chrome Browser: Main2, Document Search Functionality is not working as expected
- 05:06 PM Bug #12055 (Closed): IE & Chrome Browser: Main2, Document Search Functionality is not working as expected
- In Main2, Search Functionality is not working as expected. Its not Search and display the exact value
- 09:34 PM Bug #12056 (Resolved): IE Main2: Without the Document Open By doing the Document Search Functionality its displaying JS Error
- Fixed and patches provided for hotfixs testing.
- 09:33 PM Bug #12056 (Open): IE Main2: Without the Document Open By doing the Document Search Functionality its displaying JS Error
- 05:19 PM Bug #12056 (Closed): IE Main2: Without the Document Open By doing the Document Search Functionality its displaying JS Error
- Main2, Without the Document Open By doing the Document Search Functionality its displaying JS Error as
"Line: 625... - 09:28 PM Bug #11860: IE Main2: Production Item Operation Flow in the Diagrams, by clicking on the Link Options(Arrow) or the Links its displaying JS Error
- Not able to replicate with given steps
- 08:27 PM Bug #11994 (In Progress): AIAG VDA Design: In Block Diagram,When click on show item boundaries an JS error is displaying on the screen
- 08:02 PM Bug #11996 (In Progress): AIAG VDA Design: In P-diagram,after selecting the element and then click on P-diagram JS error will display
- 06:36 PM Bug #12003 (In Progress): AIAG VDA both Design and Process: When Right click on tree view sort by ascending and sort by descending is displaying
- 06:16 PM Bug #11990 (Closed): Flows Done not working properly
- As per the Logic this is Expected Flow so closing this issue
- 06:09 PM Bug #11830 (Closed): VOC - Function and Requirement created in FSR document is displayed along with the Function and Requirement created in IFM in same VOC row.(Refer Description)
- As per the Current Desing technical safety items is only separate Group. Next release all these group dependency wil...
- 12:38 PM Bug #11830 (Resolved): VOC - Function and Requirement created in FSR document is displayed along with the Function and Requirement created in IFM in same VOC row.(Refer Description)
- 04:50 PM Bug #12034: AIAG VDA Design & Process:In DFMEA/PFMEA, Right click on the header it is displaying preview publish
- Patch is not applied so i did not verify this issue so this issue is still in Resolved status.
- 12:18 PM Bug #12034 (Resolved): AIAG VDA Design & Process:In DFMEA/PFMEA, Right click on the header it is displaying preview publish
- Removed the preview publish menu
- 04:42 PM Bug #11812 (In Progress): Block Diagram(Item boundaries button) - In Scope check boxes in Item boundaries are editable.
- 04:37 PM Bug #12046 (Resolved): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- Not AN issue . Score Chart Based on Percentage Score
- 04:35 PM Bug #11905 (Resolved): Search Inspection Entry:Data is not displaying if the preference data format is dd/mm/yy or yy/mm/dd
- 04:33 PM Bug #12002 (In Progress): AIAG VDA Design: In Failure Analysis,In table view when delete the blank branch continuously JS error will display
- 04:27 PM Bug #12047 (Resolved): LPA delete Template validation alert is not disabling when clicked
- Fixed
- 04:20 PM Bug #12000 (In Progress): AIAG VDA Design: In Interface Function Matrix,After select the Add/Remove element,context element field data change to number
- 04:20 PM Bug #11998 (In Progress): IFM/Item Boundaries - Add/Remove elements dialog window is refreshed multiple times.
- 03:29 PM Bug #12043 (Resolved): LPA: When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according like "Machine" or "Production line"
- Cannot Able to Replicate!!
- 12:25 PM Bug #12016 (Resolved): IE & Chrome: Bulk Publish, By Clicking on Publish Button its not displaying the Published Successfully Message
- Fixed and patches ready for testing
- 12:00 PM Bug #12025 (Resolved): IC Settings:By shift and By hours field values are not displaying during edit operation
- 11:58 AM Bug #11817 (Resolved): User enters Defect description for any characteristics and close the pop-up window without clicking on done.After opening the pop-up again the saved data is not showing
04/21/2019
- 12:55 PM Bug #12048 (Open): Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the text box
- 12:55 PM Bug #12047 (Open): LPA delete Template validation alert is not disabling when clicked
- 12:55 PM Bug #12046 (Open): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- 12:55 PM Bug #12045 (Open): Social Media Layout: Action count is not updated properly.
04/17/2019
- 05:33 PM Bug #12048 (Closed): Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the text box
- Advanced Search: When Clicking on Edit Search, In Document Number it showing Prefix of Document Number outside of the...
- 03:09 PM Bug #12047 (Closed): LPA delete Template validation alert is not disabling when clicked
- LPA delete Template validation alert is not disabling when clicked
- 02:57 PM Bug #12046: In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- Missed by QA
- 02:57 PM Bug #12046 (Closed): In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying properly
- In Audit status page when tried to view the report using Radar Sheet some of the tool tips scoring is not displaying ...
- 02:10 PM Bug #12045: Social Media Layout: Action count is not updated properly.
- Its been a known issue in Normal EWQIMS layout. Now adding for Social media layout
- 11:38 AM Bug #12045 (Closed): Social Media Layout: Action count is not updated properly.
- Social Media Layout: Action count is not updated properly.
- 11:21 AM Bug #12023 (Open): Created remainder frequency is not listed in the drop down or else it is not visible to select.Because creating again with the same name it shows alert.
- 10:09 AM Bug #12023: Created remainder frequency is not listed in the drop down or else it is not visible to select.Because creating again with the same name it shows alert.
- New issue in this cycle. Working in previous cycle
- 11:21 AM Bug #12026 (Open): Tag index report: Shows error when clicking on Tag index report
- 10:10 AM Bug #12026: Tag index report: Shows error when clicking on Tag index report
- New report added in CY7.Already Verified this in pandora staging and it was working
- 11:21 AM Bug #12028 (Open): Blank DB - Documents - When Clicking on Document it showing error
- 10:09 AM Bug #12028: Blank DB - Documents - When Clicking on Document it showing error
- For a particular document, it shows error
- 11:20 AM Bug #12033 (Open): Documents - SinglePageTOC - SinglePageTOC is not showing the document when the User Preference is +1
- 10:09 AM Bug #12033: Documents - SinglePageTOC - SinglePageTOC is not showing the document when the User Preference is +1
- New scenario identified in this cycle
- 11:20 AM Bug #12036 (Open): Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents are not showing
- 10:08 AM Bug #12036: Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents are not showing
- Last cycle, Integrated documents are not listed in advanced search.
- 11:20 AM Bug #12040 (Open): Pandora DB: Tag search menu is not displayed(For Musashi db also)
- 10:07 AM Bug #12040: Pandora DB: Tag search menu is not displayed(For Musashi db also)
- Worked in previous cycle
- 11:19 AM Bug #12043 (Open): LPA: When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according like "Machine" or "Production line"
- 09:47 AM Bug #12043: LPA: When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according like "Machine" or "Production line"
- Missed by QA
- 09:47 AM Bug #12043 (Closed): LPA: When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according like "Machine" or "Production line"
- When Selected month in Time period in LPA schedule creation screen the Equipment are not getting sorted according lik...
- 09:35 AM Bug #12041 (Open): Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- 09:35 AM Bug #12035 (Open): Receiving Inspection:Unable to change status to completed /Unable to search for completed Inspections
- 09:35 AM Bug #12037 (Open): External element is displayed as internal element in block diagram.
- 09:35 AM Bug #12034 (Open): AIAG VDA Design & Process:In DFMEA/PFMEA, Right click on the header it is displaying preview publish
- 09:34 AM Bug #12031 (Open): AIAG VDA Design & Process:In DFMEA/PFMEA, Reconcile with project planner tasks after select the phase and click on save button JS error is displaying
- 09:34 AM Bug #12030 (Open): AIAG VDA Design & Process:In DFMEA/PFMEA, Drag and Edit header issue
- 09:34 AM Bug #12027 (Open): AIAG VDA Process - Failure Analysis -In Associate Design Failure when enter data in function JS error is displaying and cannot able to add Requirement and Failure in it.
- 09:33 AM Bug #12025 (Open): IC Settings:By shift and By hours field values are not displaying during edit operation
- 09:32 AM Bug #12022 (Open): AIAG VDA Process - Function/Failure Analysis - In table operation column field some of the number data is displaying
04/16/2019
- 06:35 PM Bug #12041: Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- Works as expected in previous cycles
- 06:35 PM Bug #12041 (Closed): Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- Master folder tag: Cant able to create a folder tag. Due to this cant able to verify Tag search
- 06:30 PM Bug #12040 (Closed): Pandora DB: Tag search menu is not displayed(For Musashi db also)
- Pandora DB: Tag search menu is not displayed
- 05:54 PM Bug #12037 (Closed): External element is displayed as internal element in block diagram.
- External element is displayed as internal element in block diagram.
This is a new issue - 05:54 PM Bug #12035: Receiving Inspection:Unable to change status to completed /Unable to search for completed Inspections
- Used to work in Previous build
- 05:53 PM Bug #12035 (Closed): Receiving Inspection:Unable to change status to completed /Unable to search for completed Inspections
- Receiving Inspection:Unable to change status to completed /Unable to search for completed Inspections
- 05:53 PM Bug #12036 (Closed): Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents are not showing
- Advanced Search - SinglePageTOC - When selecting a level and changing the page to SinglePageTOC, Integrated documents...
- 05:39 PM Bug #12034: AIAG VDA Design & Process:In DFMEA/PFMEA, Right click on the header it is displaying preview publish
- It is a new issue which is not display in previous cycle
- 05:37 PM Bug #12034 (Closed): AIAG VDA Design & Process:In DFMEA/PFMEA, Right click on the header it is displaying preview publish
- When right click on the header a new option like preview publish is displaying.please verify the attachment.
- 05:28 PM Bug #12033 (Closed): Documents - SinglePageTOC - SinglePageTOC is not showing the document when the User Preference is +1
- SinglePageTOC is not showing the document when the User Preference is +1 , For Example, When the page size is 10 but ...
- 04:54 PM Bug #12002: AIAG VDA Design: In Failure Analysis,In table view when delete the blank branch continuously JS error will display
- QA missed out issue
- 04:52 PM Bug #12031: AIAG VDA Design & Process:In DFMEA/PFMEA, Reconcile with project planner tasks after select the phase and click on save button JS error is displaying
- Now only i have tried in this scenario so i am not sure whether it is new or existing issue.
- 04:49 PM Bug #12031 (Closed): AIAG VDA Design & Process:In DFMEA/PFMEA, Reconcile with project planner tasks after select the phase and click on save button JS error is displaying
- In PFMEA table in that prevention action column field right click and click on Reconcile with project planner tasks i...
- 03:54 PM Bug #12030: AIAG VDA Design & Process:In DFMEA/PFMEA, Drag and Edit header issue
- It is the new issue which is not replicated in previous cycle.
- 03:53 PM Bug #12030 (Closed): AIAG VDA Design & Process:In DFMEA/PFMEA, Drag and Edit header issue
- When double click on the header and enter the value it will create the new header drag that header to some other plac...
- 03:13 PM Bug #11317 (Closed): Draft->When a draft is converted to document, it is able to delete the draft. Delete document check box is disabled in earlier versions
- 03:01 PM Bug #12028 (Closed): Blank DB - Documents - When Clicking on Document it showing error
- Blank DB - Documents - When Clicking on Document it showing error
- 02:57 PM Bug #12027: AIAG VDA Process - Failure Analysis -In Associate Design Failure when enter data in function JS error is displaying and cannot able to add Requirement and Failure in it.
- It is new issue which is not happened in previous cycle.
- 02:56 PM Bug #12027 (Closed): AIAG VDA Process - Failure Analysis -In Associate Design Failure when enter data in function JS error is displaying and cannot able to add Requirement and Failure in it.
- In Associate Design Failure if we add new function JS Error will display on the screen then when we try to add requir...
- 02:38 PM Bug #12026 (Closed): Tag index report: Shows error when clicking on Tag index report
- Tag index report: Shows error when clicking on Tag index report
- 12:57 PM Bug #11997 (Fixed with Hotfix): Blank DB - Alignment Chart - Risk Form - View Action plan - Without adding a row, the row is getting deleted
- 12:09 PM Bug #11997 (Resolved): Blank DB - Alignment Chart - Risk Form - View Action plan - Without adding a row, the row is getting deleted
- for the first time when the action plan is empty you cannot delete the first row even if you add the data, after refr...
- 12:47 PM Bug #12025: IC Settings:By shift and By hours field values are not displaying during edit operation
- Used to work in previous builds and Cy-7 starting also
- 12:46 PM Bug #12025 (Closed): IC Settings:By shift and By hours field values are not displaying during edit operation
- IC Settings:By shift and By hours field values are not displaying during edit operation
- 12:42 PM Bug #12024 (Open): Possible cause in approver login when clicked on document number hyperlink displays some hidden button "Close" inside the form
- 12:28 PM Bug #12024: Possible cause in approver login when clicked on document number hyperlink displays some hidden button "Close" inside the form
- Bug #11637 issue found during the "Yet to verify" item verification
- 12:28 PM Bug #12024 (Closed): Possible cause in approver login when clicked on document number hyperlink displays some hidden button "Close" inside the form
- Bug #11637
Possible cause in approver login when clicked on document number hyperlink displays some hidden button ... - 12:24 PM Bug #11637 (Closed): Concern form Auditee response approval in approver's login when clicked on on the Sub hyperlinks on the left side displays error
- verified in SP900 Cy-7 and Closed
- 12:18 PM Bug #11581 (Closed): Need to change the title in PPR form
- Issue verified and Closed in SP900 Cy-7
- 12:13 PM Bug #12023 (Closed): Created remainder frequency is not listed in the drop down or else it is not visible to select.Because creating again with the same name it shows alert.
- Created remainder frequency is not listed in the drop down or else it is not visible to select.Because creating again...
- 11:57 AM Bug #11121 (Closed): Responding to the corrective actions email is not triggering when Auditee response to the Corrective actions
- issue verified and Closed in SP_900 cy-7
- 11:49 AM Bug #12000: AIAG VDA Design: In Interface Function Matrix,After select the Add/Remove element,context element field data change to number
- This issue is not occur in before cycle and only displaying in cycle 7.
- 11:47 AM Bug #12021: AIAG VDA Process - Structure Analysis - When double click on 4M it get hide and after Refresh it is displaying
- It is new feature which is added in sprint but not in SP900 .But it is replicating in SP900.
- 10:43 AM Bug #12021 (Open): AIAG VDA Process - Structure Analysis - When double click on 4M it get hide and after Refresh it is displaying
- 10:41 AM Bug #12021 (Closed): AIAG VDA Process - Structure Analysis - When double click on 4M it get hide and after Refresh it is displaying
- In structure analysis when double click on 4M data it get hided and after it get refresh it is displaying.please veri...
- 11:46 AM Bug #12022: AIAG VDA Process - Function/Failure Analysis - In table operation column field some of the number data is displaying
- It is new issue which is not happened in previous cycle.
- 11:45 AM Bug #12022 (Closed): AIAG VDA Process - Function/Failure Analysis - In table operation column field some of the number data is displaying
- In table view when right click on PC_id which should be in Blank and click on characteristics branch which will creat...
- 10:43 AM Bug #12020 (Open): Document Management - Document Number is not sorting(It should sort when the doc number has only numbers also)
- 10:41 AM Bug #11995 (Closed): Blank DB - Alignment Chart - Risk Form - When Adding a new row in Risk Form, Previous row is not displaying
- 11997 and 11995 are similar issues so closing this issue
Also available in: Atom