Apply Clear
1. Login to OBOT.2. Select a Part3. Select the PSW document and check the Materials Reporting
1. Login to OBOT2. Select a Part3. Upload Checking Aids document4. Check for the uploaded document in the Checking Aids page
1. Login to OBOT2. Check PFD document 3. Verify the rev date
1.Upload DFMEA document
2.In the keyfinding section, click on the 7.M finding button
Observe the behaviour
1.Create a supplier say Supplier A
2.Create a part for the supplier A say Part A
3.Delete the supplier AShould check the dependency since it has part A
1.Upload DFMEA document and PSW document
2.In DFMEA document, enter revision date as 15/10/2019
3.In PSW document, enter the revision date as 20/01/2014
4.Validate the DFMEA document
5.Shows no finding
1. Login to OBOT2. Select a part3. Click on DFMEA document4. Blank out Severity/Occurrence and check the findings
Case 1:1.Login to OBOT2.Select a part3.Upload the documents4.Select DFMEA Document5. Enter some text in Target date6. Reload and click on DFMEA document =====================================Case 2:
2.Click on DFMEA tab and Delete the revision date
3.Click on Validate, Loading symbol is not there and also its not showing the finding as per the Rule: DFMEA
4.Go back and click on the part
5.Click on DFMEA tab, there is no response
1.FInding is displayed that the part number is not as per the customer print
2.Then added the part number same as customer print
3.Re validate the document
4.shows finding even the part number is same as customer print
1. Login to OBOT2. Select a part3. Upload documents and see the result
1. Login to OBOT2. Select Part3. Select the PFD document4. Enter an incorrect part and check status5. Blank the part number and check
1.Upload the PFMEA document
2.Click on start and navigate to PFMEA document
3.It shows findings for Part number and part name
4.Changed the part name and validated
5.After that changed part number and clicked on validate, there is no response
6.And also when clicking on that tab again, there is no response
PFMEA: Number of findings displayed is wrong
1.Initially its showing 59 findings in count and its showing 64 key findings
2.Then I have rectified the part name mismatch finding,. then its showing the findings as 94
1.Login to Obot2.Select a Part3. Click on the CP document4. Check for the finding "Following bubble number not in the cp 22,40"
IN DFMEA, there is no column for Operation, but there is a rule called Operation Name & Number should be in sync with Control plan and Process Flow Diagram, and also its not showing any findings
1. Login to OBOT2. Select a supplier, upload updated PFMEA3. Click on PFMEA Document4. check the findings
Document Verification:Part name and number is different for all the documents, but its not showing any findings
1.Login to OBot2.Select a Part3.Click on the document name4.Check the findings
1. Login to OBOT2. Select the part3. Click on the Dimensional Result Document4. Check the finding and see the sheet attached
1.Login to OBOT 2. Select parts3. Select the MSA document4. Check the findings
1.In document settings, added a new question
2.In document verification, the question is not reflected
1.Upload the drawing document and enter revision number as 2
2.Start verification
3.Click on the ECD/CEA document or navigate to those document using next button
1.Create a new supplier with logo
2.Save the details
3.The logo is displayed in supplier listing screen
4.Click on edit supplier icon
5.Logo is displayed in edit supplier screen as well
6.Save the supplier
7.The attached logo is deleted
1.Login to OBOT2. Selct Parts3. Click on PFMEA4. Select Waive option for the findings5. Click on Validate
1. Login to OBOT2. Select a Part3. select any document4. Click on Add rule5. Enter the details
Also available in: Atom CSV PDF
Selected Columns All Columns
Encoding ISO-8859-1 UTF-8
Cancel