Apply Clear
1. Login to OBOT2. select part #EP13. Check the PSW document
1. Login to OBOT2. Select a part and click on the QLD document icon3. check for the questions and findings.
1. Login to Obot2. Check document CP3. Check column G in the spreadsheet
1.In DFMEA document, enter the target date lesser than the revision date
2.Click on validate
3.There is no finding
1.IN DFMEA, blank out the recommended action field
2.Validate the document
3.The field is filled automatically and its showing in red color as a finding
4.Click on validate again, the finding is not displayed
1.Enter the severity as 1 in one field and 10 in other field
3.Check the findings
1.Upload the DFMEA document
2.Validate it
3.Check the # of key findings and the number of findings in description
1.IN DFMEA document,enter the potential causes of failure as "Error caused by the operator"
3.System not showing any error.It shows finding only when the exact text is operator error
1. Login to OBOT2. Check PFD document 3. Verify the rev date
1.Login to OBOT2. Check for DFMEA document3. Enter future date for Target date4. Update Recommended action to "completed" and check the findings
1.Upload DFMEA document
2.In the keyfinding section, click on the 7.M finding button
Observe the behaviour
1.Upload DFMEA docuemnt
2.Enter prepared by field as Joe, MAry
3.Validate it
4.Prepared by field shows red colour
5.But there is no finding for that
1.Upload DFMEA document and PSW document
2.In DFMEA document, enter revision date as 15/10/2019
3.In PSW document, enter the revision date as 20/01/2014
4.Validate the DFMEA document
5.Shows no finding
1. Login to OBOT2. Select a part3. Click on DFMEA document4. Blank out Severity/Occurrence and check the findings
Case 1:1.Login to OBOT2.Select a part3.Upload the documents4.Select DFMEA Document5. Enter some text in Target date6. Reload and click on DFMEA document =====================================Case 2:
2.Click on DFMEA tab and Delete the revision date
3.Click on Validate, Loading symbol is not there and also its not showing the finding as per the Rule: DFMEA
4.Go back and click on the part
5.Click on DFMEA tab, there is no response
1.Login to OBOT2.Select a part3.Upload the documents4.Select DFMEA Document and Check the findings.
1. Login To Obot2. Select a Part and Upload Document3. Click on DFMEA and check the finding for part name
1.FInding is displayed that the part number is not as per the customer print
2.Then added the part number same as customer print
3.Re validate the document
4.shows finding even the part number is same as customer print
1. Login to OBOT2. Select Part3. Select the PFD document4. Enter an incorrect part and check status5. Blank the part number and check
1.Upload the PFMEA document
2.Click on start and navigate to PFMEA document
3.It shows findings for Part number and part name
4.Changed the part name and validated
5.After that changed part number and clicked on validate, there is no response
6.And also when clicking on that tab again, there is no response
PFMEA: Number of findings displayed is wrong
1.Initially its showing 59 findings in count and its showing 64 key findings
2.Then I have rectified the part name mismatch finding,. then its showing the findings as 94
1.Login to Obot2.Select a Part3. Click on the CP document4. Check for the finding "Following bubble number not in the cp 22,40"
1. Login to OBOT2. Click on a Part3. Select AAR document4. Check the spreadsheet attached
IN DFMEA, there is no column for Operation, but there is a rule called Operation Name & Number should be in sync with Control plan and Process Flow Diagram, and also its not showing any findings
1. Login to OBOT2. Select a supplier, upload updated PFMEA3. Click on PFMEA Document4. check the findings
Also available in: Atom CSV PDF
Selected Columns All Columns
Encoding ISO-8859-1 UTF-8
Cancel