Activity
From 09/27/2019 to 10/26/2019
10/25/2019
- 04:31 PM Bug #14642 (Open): QLD- Contains 7 questions but those are not showing up with Yes/No Option in the page, All those are marked as findings.
- QLD- Contains 7 questions but those are not showing up with Yes/No Option in the page, All those are marked as findings.
10/24/2019
- 05:47 PM Bug #14622 (Open): In Control plan document Special character (Column G ) fields are highlighted, but no such findings are showing up
- In Control plan document Special character (Column G ) fields are highlighted, but no such findings are showing up
- 09:59 AM Bug #14563 (Suggestion): THe entered special characters are not showing up after saving
- The entered special characters are not showing up after saving (refer screen shot).
10/22/2019
- 04:54 PM Bug #14512 (Open): DFMEA: Target date should not be lesser than revision date. If its lesser than revision date, then it should show as finding
- DFMEA: Target date should not be lesser than revision date. If its lesser than revision date, then it should show as ...
- 04:47 PM Bug #14511 (Open): DFMEA: Recommended action required text should not be automatically entered in the document when its blank. No finding when the field has text Recommended action required
- DFMEA: Recommended action required text should not be automatically entered in the document when its blank. No findin...
- 02:52 PM Bug #14510 (Open): DFMEA: Finding should be same when the user enters 1/10 in severity.. Same for occurrence and detection
- DFMEA: when the severity is entered as 1/10, then it should show the finding as "The severity is 1 or 10 " but when t...
- 12:40 PM Bug #14509 (Open): DFMEA: Number of key findings count and the key findings description count mismatching
- DFMEA: Number of key findings count and the key findings description count mismatching
- 12:26 PM Bug #14508 (Open): DFMEA: When entering cause as "Error caused by the operator" System not showing any error for the rule "Operator error in Cause is not acceptable".
- DFMEA: When entering cause as "Error caused by the operator" System not showing any error for the rule "Operator erro...
- 12:00 PM Usability #14251 (Resolved): Part Name showing case sentitive-DFMEA
- case sensitive removed..
10/17/2019
- 06:02 PM Bug #14460 (Open): THe revision date rule is not validating for PFD
- THe revision date rule (Revision date must be present & Revision date Updated within last 3 months of the PSW) is not...
- 12:40 PM Bug #14430 (Open): Recommended action has not been completed before the target completion date- Rule not validating
- The recommended action is accepting value "Completed" even after updating the target date to future dates.
This shou... - 10:01 AM Bug #14254 (Closed): DFMEA-"The Occ is 1 or 10 (7, M)" finding is showing up even after updating the value to 1 or 10.
10/16/2019
- 04:38 PM Usability #14406 (Open): DFMEA:Key findings: When clicking on the key findings button, its not moving properly to that particular cell.The user has to scroll and check the cell which has finding
- DFMEA: Key findings: When clicking on the key findings button, its not moving properly to that particular cell.The us...
- 03:08 PM Unit Level and Cosmetic Issues #14395 (Open): Supplier deletion should check the dependency. It should not allow the user to delete the supplier which has parts
- Supplier deletion should check the dependency. It should not allow the user to delete the supplier which has parts
- 03:07 PM Unit Level and Cosmetic Issues #14394 (Open): Suppliers:When deleting the supplier, its not reflected then and there. Page is not refreshed. Its removing the supplier only after refresh
- Suppliers:When deleting the supplier, its not reflected then and there. Page is not refreshed. Its removing the suppl...
- 12:20 PM Bug #14183 (Resolved): The AAR document attached is showing column names as numbers instead of alphabets
- 12:20 PM Usability #14251 (In Progress): Part Name showing case sentitive-DFMEA
- 12:01 PM Bug #14057 (Resolved): Accepting any values for the finding"Receiving goods missing/Shipping goods missing" findings in the Process flow Diagram
- That rule is updated by chad.. current rule is first operation description should have keyword 'receiving'. Then 'shi...
- 11:59 AM Bug #14254: DFMEA-"The Occ is 1 or 10 (7, M)" finding is showing up even after updating the value to 1 or 10.
- Not an issue - Closed
- 11:56 AM Bug #14254 (Fixed with Hotfix): DFMEA-"The Occ is 1 or 10 (7, M)" finding is showing up even after updating the value to 1 or 10.
- NOt an Issue
10/15/2019
- 08:01 PM Bug #14255 (Resolved): Recommended Action has to have a Target Date-DFMEA
- 12:50 PM Bug #14255 (Open): Recommended Action has to have a Target Date-DFMEA
- 08:00 PM Bug #14056 (Resolved): Added a new rule for control plan -"Part name matches with PSW" but it doesn’t comes under finding even after updating wrong partname
- 08:00 PM Bug #14111 (Resolved): Document Verification:Part name and number is different for all the documents, but its not showing any findings. It should be unique in all documents
- 07:59 PM Bug #14314 (Resolved): Missing severity and Occurrence in DFMEA not coming under findings
- 12:51 PM Bug #14314 (Open): Missing severity and Occurrence in DFMEA not coming under findings
- 10:00 AM Bug #14314 (Resolved): Missing severity and Occurrence in DFMEA not coming under findings
- There is a rule set in DFMEA for"Missing severity" and "Missing Occurrence". After blanking out values for severity/O...
- 07:59 PM Bug #14334 (Resolved): DFMEA: when prepared by field has multiple members, it showing red and there is no finding for that
- 02:46 PM Bug #14334 (In Progress): DFMEA: when prepared by field has multiple members, it showing red and there is no finding for that
- Fixed
- 02:40 PM Bug #14334 (Open): DFMEA: when prepared by field has multiple members, it showing red and there is no finding for that
- 02:27 PM Bug #14334 (Resolved): DFMEA: when prepared by field has multiple members, it showing red and there is no finding for that
- DFMEA: when prepared by field has multiple members, it showing red and there is no finding for that
- 07:59 PM Bug #14199 (Resolved): Part number is validating only when it is blank for PFD document
- 11:46 AM Bug #14199 (In Progress): Part number is validating only when it is blank for PFD document
- Fixed
- 07:59 PM Bug #14263 (Resolved): DFMEA document page is not showing up after entering text under target date field.(Rev date missing finding is not displayed)
- 02:17 PM Bug #14263 (In Progress): DFMEA document page is not showing up after entering text under target date field.(Rev date missing finding is not displayed)
- 12:51 PM Bug #14263 (Open): DFMEA document page is not showing up after entering text under target date field.(Rev date missing finding is not displayed)
- 07:58 PM Bug #14330 (Resolved): DFMEA: Revision date field: System not showing any finding based on the rule "DFMEA4: Revision date must be present & Revision date Updated within last 3 months of the PSW"Its not showing finding based on PSW
- Fixed
- 02:40 PM Bug #14330 (In Progress): DFMEA: Revision date field: System not showing any finding based on the rule "DFMEA4: Revision date must be present & Revision date Updated within last 3 months of the PSW"Its not showing finding based on PSW
- 02:40 PM Bug #14330 (Open): DFMEA: Revision date field: System not showing any finding based on the rule "DFMEA4: Revision date must be present & Revision date Updated within last 3 months of the PSW"Its not showing finding based on PSW
- 01:18 PM Bug #14330 (Resolved): DFMEA: Revision date field: System not showing any finding based on the rule "DFMEA4: Revision date must be present & Revision date Updated within last 3 months of the PSW"Its not showing finding based on PSW
- DFMEA: Revision date field: System not showing any finding based on the rule "DFMEA4: Revision date must be present &...
- 07:58 PM Unit Level and Cosmetic Issues #14338 (Open): Parts Listing screen:When the supplier name is having more characters, then the parts are not aligned
- 02:45 PM Unit Level and Cosmetic Issues #14338 (Open): Parts Listing screen:When the supplier name is having more characters, then the parts are not aligned
- Parts Listing screen:When the supplier name is having more characters, then the parts are not aligned
- 02:10 PM Suggestion #14332 (Open): While answering questions, for each questions,when the user answered, the page gets loading.Better to load the screen after answering all the qns or better to answer and clicked on validate can change the key-findings results
- While answering questions, for each questions,when the user answered, the page gets loading.Better to load the screen...
- 01:15 PM Bug #14114 (Closed): Document verification: Rule:Rev number matches with PSW. Its not showing this finding
- Rev number should match with the revision number entered by the user not based on PSW
- 01:11 PM Bug #14114 (Not Resolved): Document verification: Rule:Rev number matches with PSW. Its not showing this finding
- 12:51 PM Bug #14254 (Open): DFMEA-"The Occ is 1 or 10 (7, M)" finding is showing up even after updating the value to 1 or 10.
10/11/2019
- 05:54 PM Bug #14263 (Resolved): DFMEA document page is not showing up after entering text under target date field.(Rev date missing finding is not displayed)
- Case 1: DFMEA document page is not showing up after entering text under target date field
Either it should not allow... - 01:24 PM Bug #14255 (Resolved): Recommended Action has to have a Target Date-DFMEA
- There is a rule for Recommended action has to have a Target Date
but Blank/invalid values are accepting under Target... - 01:03 PM Bug #14254 (Closed): DFMEA-"The Occ is 1 or 10 (7, M)" finding is showing up even after updating the value to 1 or 10.
- THe finding "The Occ is 1 or 10 (7, M)" is showing even after updating the occurance to 1 or 10.
- 11:43 AM Usability #14251 (Resolved): Part Name showing case sentitive-DFMEA
- IN DFMEA finding "Part Name does not match with Customer Print"
The field seems to be case sensitive.
Eg: Part na...
10/10/2019
- 03:00 PM Bug #14101: The findings count and total number of key findings listed in MSA document is not equal
- Not an issue since waive is checked
- 02:59 PM Bug #14101 (Closed): The findings count and total number of key findings listed in MSA document is not equal
- 02:59 PM Bug #14101 (Fixed with Hotfix): The findings count and total number of key findings listed in MSA document is not equal
- 10:52 AM Bug #14233 (Open): Dashboard: Not verified status is not displayed,when the supplier has a part only with not verified status . Its showing the supplier details only if the part has some other status like pending/completed
- Dashboard: Not verified status is not displayed,when the supplier has a part only with not verified status . Its show...
10/09/2019
- 06:21 PM Bug #14063 (Resolved): After selecting Waive option in the finding click on validate button the selected findings gets duplicated but findings count remains same
- Fixed
- 12:56 PM Bug #14063 (In Progress): After selecting Waive option in the finding click on validate button the selected findings gets duplicated but findings count remains same
- Fixed
- 06:20 PM Bug #14098 (Resolved): The finding 5,H in DIMR is not highlighted -Showing inwhite background only
- Fixed
- 12:21 PM Bug #14098 (In Progress): The finding 5,H in DIMR is not highlighted -Showing inwhite background only
- Fixed
- 06:20 PM Bug #14225 (Resolved): DFMEA/PFMEA: Finding is showing even the part number is same as customer print
- Fixed
- 04:09 PM Bug #14225 (In Progress): DFMEA/PFMEA: Finding is showing even the part number is same as customer print
- 01:11 PM Bug #14225 (Open): DFMEA/PFMEA: Finding is showing even the part number is same as customer print
- 01:02 PM Bug #14225 (Resolved): DFMEA/PFMEA: Finding is showing even the part number is same as customer print
- DFMEA/PFMEA: Finding is showing even the part number is same as customer print
- 04:32 PM Bug #14050 (Resolved): Even after disabling the rules, it is showing as a finding in the detail page
- 03:04 PM Bug #14109 (Resolved): DFMEA document:Sporadically it shows error when scrolling up and down.
- 02:59 PM Bug #14073 (Resolved): ECD: When revision number is more than 1, its showing finding. In that finding, it shows the need correction button as 0.
- 01:31 PM Bug #14094: Added a new question in ECD, but its not displayed in findings
- New rules will be added only for the newly created and suppliers.
- 01:11 PM Bug #14204 (Open): The documents attached for the part is showing different behaviour
- 01:11 PM Bug #14199 (Open): Part number is validating only when it is blank for PFD document
- 12:57 PM Bug #14049 (Resolved): In the document there is not validation for part name, checking whether the part name exists or not only
- 12:35 PM Bug #14197 (Resolved): PFMEA tab is not working. When clicking on that tab, there is no response
- 12:35 PM Bug #14197 (Open): PFMEA tab is not working. When clicking on that tab, there is no response
- 11:34 AM Bug #14197: PFMEA tab is not working. When clicking on that tab, there is no response
- Same occurs for DFMEA also..sometimes its working sometimes its not
- 12:25 PM Bug #14099 (Resolved): For AAR document same finding is showing 3 times(duplicated)
- Not an issue. In this AAR 3 documents is there so 3 findings is displayed.
- 12:09 PM Bug #14097 (Resolved): The findings showng in MSA is incorrect- Rule is set to accept value <10 for Special char Gauge but showing a different finding
- Not an issue. This Finding come under Rule -MSA7. Kindly close this ticket
- 12:05 PM Bug #14224 (Resolved): Document verification: Document is verifying only when clicking on the document tab, the documents are not verified when clicking on start button/ clicking the start icon(Play symbol)
- Yes the verification start when you are selecting document tab. This is the way this application working. I hope this...
- 11:59 AM Bug #14224 (Open): Document verification: Document is verifying only when clicking on the document tab, the documents are not verified when clicking on start button/ clicking the start icon(Play symbol)
- 11:25 AM Bug #14224 (Resolved): Document verification: Document is verifying only when clicking on the document tab, the documents are not verified when clicking on start button/ clicking the start icon(Play symbol)
- Document verification: Document is verifying only when clicking on the document tab, the documents are not verified w...
- 12:02 PM Bug #14114 (Resolved): Document verification: Rule:Rev number matches with PSW. Its not showing this finding
- Kindly Create a new supplier and new part then test once again.Revision No match with customer print(we given) not ag...
- 11:58 AM Bug #14167 (Resolved): Uploaded new PFMEA document but the existing rules are not added as findings
- Kindly Create a new supplier and new part then test once again.
10/03/2019
- 05:59 PM Bug #14182 (Resolved): IN DFMEA, there is no column for Operation, but there is a rule called Operation Name & Number should be in sync with Control plan and Process Flow Diagram, and also its not showing any findings
- Already we developed operation No in DFMEA but we don't have a proper DFMEA.. once i receive proper document i will s...
- 05:57 PM Bug #14193 (Resolved): PFMEA: Number of findings displayed is wrong(same for DFMEA)
- 05:56 PM Bug #14193 (Open): PFMEA: Number of findings displayed is wrong(same for DFMEA)
- 05:38 PM Bug #14204 (Open): The documents attached for the part is showing different behaviour
- 1. While attaching document under design record it is saving under the 2nd document and sometimes to the 3rd document...
- 04:51 PM Usability #13420 (In Progress): User creation screen:Better to have the City,state and country in the dropdown, the user can select it from the dropdown
- 12:59 PM Bug #14199 (Resolved): Part number is validating only when it is blank for PFD document
- The rule is given as"Part number matches with PSW" but it is accepting any values . Validating only when it is blanke...
10/01/2019
- 03:18 PM Bug #14197 (Resolved): PFMEA tab is not working. When clicking on that tab, there is no response
- PFMEA tab is not working. When clicking on that tab, there is no response
- 03:14 PM Bug #14046 (In Progress): Revisions and summary is mismatching. Should not show the same part details multiple times in listing screen.Status showing one revision is rejected and other revision as pending, but listing screen shows both as rejected
- 01:31 PM Bug #14069 (In Progress): Better to show the alert message for supplier already exists after clicking save.
- Shows alert that supplier name exists issue fixed. But still we are following same validation process.
- 12:16 PM Bug #14193 (Resolved): PFMEA: Number of findings displayed is wrong(same for DFMEA)
- PFMEA: Number of findings displayed is wrong
1.Initially its showing 59 findings in count and its showing 64 key f...
09/30/2019
- 06:54 PM Usability #13738 (In Progress): When the same supplier and part is created for different region, then couldn't differentiate the suppliers and parts
- 06:52 PM Bug #14184 (Open): Bubble count combination is showing as a finding
- 05:49 PM Bug #14184 (Open): Bubble count combination is showing as a finding
- Bubble count combination is showing as a finding (Following bubble number not in the cp 22,40) The bubble count 22 an...
- 06:52 PM Bug #14183 (Open): The AAR document attached is showing column names as numbers instead of alphabets
- 05:41 PM Bug #14183 (Resolved): The AAR document attached is showing column names as numbers instead of alphabets
- The AAR document attached is showing column names as numbers instead of alphabets
- 06:52 PM Bug #14182 (Open): IN DFMEA, there is no column for Operation, but there is a rule called Operation Name & Number should be in sync with Control plan and Process Flow Diagram, and also its not showing any findings
- 04:38 PM Bug #14182 (Resolved): IN DFMEA, there is no column for Operation, but there is a rule called Operation Name & Number should be in sync with Control plan and Process Flow Diagram, and also its not showing any findings
- IN DFMEA, there is no column for Operation, but there is a rule called Operation Name & Number should be in sync with...
- 06:41 PM Usability #13407 (In Progress): Better to highlight the invalid user name and password text in Login screen, Same for Alert message text.
- 06:40 PM Bug #14029 (In Progress): User credentials:System shows user name already exists even its not being used(only when using the deleted user name)
- 06:22 PM Usability #14036 (In Progress): Parts listing screen: Status needs to be there in verification, when its not started
- 06:21 PM Bug #14067 (In Progress): Supplier creation screen: Attached certificate is not shown after save
- 11:05 AM Bug #14067 (Open): Supplier creation screen: Attached certificate is not shown after save
- 06:21 PM Unit Level and Cosmetic Issues #14066 (In Progress): Supplier creation screen: When hovering near certificate field, the page is flickering
- 11:05 AM Unit Level and Cosmetic Issues #14066 (Open): Supplier creation screen: When hovering near certificate field, the page is flickering
- 06:20 PM Bug #14068 (In Progress): Supplier Logo: Attached logo is deleted automatically after editing the supplier and saved
- 11:05 AM Bug #14068 (Open): Supplier Logo: Attached logo is deleted automatically after editing the supplier and saved
- 04:35 PM Unit Level and Cosmetic Issues #14070 (In Progress): Part filter search: Why part number is mandatory check and its disabled., better to have both as editable, the user can search as they need
- 11:05 AM Unit Level and Cosmetic Issues #14070 (Open): Part filter search: Why part number is mandatory check and its disabled., better to have both as editable, the user can search as they need
- 03:10 PM Usability #14052 (In Progress): There is no option to delete an added rule(only enable disable is available).
- 02:57 PM Usability #14035 (In Progress): Parts Listing screen:History icon should be disabled when there are no revisions/ when clicking on it should shows no data found
- 01:22 PM Bug #14167 (Open): Uploaded new PFMEA document but the existing rules are not added as findings
- 01:22 PM Bug #14167 (Resolved): Uploaded new PFMEA document but the existing rules are not added as findings
- Uploaded new PFMEA document but the existing rules are not added as findings.
eg:
After entering invalid data's Fin... - 11:15 AM Bug #13556 (Future Release): If the primary and alternate address are same, Instead of entering details again include an option to get the same address in the alternate address field.
- 11:11 AM Bug #13556 (Open): If the primary and alternate address are same, Instead of entering details again include an option to get the same address in the alternate address field.
- 11:10 AM Bug #13486 (Future Release): Add rule option is not showing under document settings
- 11:10 AM Bug #13478 (Future Release): The users without admin rights are able to view and add other supplier / part details.
- 11:09 AM Bug #13471 (Future Release): Document Settings: Whenever there is any change in the level and doc settings, it should automatically reflect in Supplier document settings. Now its reflecting only when the supplier is saved again
- 11:09 AM Usability #13420 (Future Release): User creation screen:Better to have the City,state and country in the dropdown, the user can select it from the dropdown
- 11:09 AM Unit Level and Cosmetic Issues #13419 (Closed): User creation: No validation in Twitter and skype field
- 11:09 AM Usability #13426 (Closed): Supplier Creation screen: Cant able to move from one field to another field using Tab Key
- 11:09 AM Usability #13432 (Closed): User Edit screen: No need of edit and save for each columns, better to have one edit and save for the entire details. Also save icon has tooltip as edit
- 11:08 AM Bug #13412 (Closed): The themes are showing different appearance
- 11:08 AM Bug #13413 (Closed): Logout is not asking for any confirmation
- 11:08 AM Unit Level and Cosmetic Issues #13418 (Closed): Restrict all the field with certain number of characters.(Some of the fields are restricted)
- 11:05 AM Bug #14114 (Open): Document verification: Rule:Rev number matches with PSW. Its not showing this finding
- 11:05 AM Bug #14111 (Open): Document Verification:Part name and number is different for all the documents, but its not showing any findings. It should be unique in all documents
- 11:05 AM Bug #14109 (Open): DFMEA document:Sporadically it shows error when scrolling up and down.
- 11:05 AM Bug #14101 (Open): The findings count and total number of key findings listed in MSA document is not equal
- 11:05 AM Bug #14099 (Open): For AAR document same finding is showing 3 times(duplicated)
- 11:05 AM Bug #14098 (Open): The finding 5,H in DIMR is not highlighted -Showing inwhite background only
- 11:05 AM Bug #14097 (Open): The findings showng in MSA is incorrect- Rule is set to accept value <10 for Special char Gauge but showing a different finding
- 11:05 AM Bug #14094 (Open): Added a new question in ECD, but its not displayed in findings
- 11:05 AM Bug #14075 (Open): ECD/CEA:No response when clicking on ECD/CEA tab (only when the document is uploaded after the finding, Drawing Revision is 2. ECD document Required.)
- 11:05 AM Bug #14073 (Open): ECD: When revision number is more than 1, its showing finding. In that finding, it shows the need correction button as 0.
- 11:05 AM Suggestion #14071 (Open): Design records: When drawing is not uploaded and started verification, finding should shows “Document not uploaded”. Now its showing DWG missing
- 11:05 AM Bug #14069 (Open): Better to show the alert message for supplier already exists after clicking save.
09/27/2019
- 05:51 PM Usability #13407: Better to highlight the invalid user name and password text in Login screen, Same for Alert message text.
- 1. Alert message text color highlighted with black color
2. invalid user name and password text highlighted based on... - 05:00 PM Bug #14112 (Resolved): Document Settings: DFMEA document:Rules 6 and 7 are missing
- Right now rule 6 and 7 are used in ML rule list. So that item not come in ordinary rule list.
- 03:00 PM Bug #14112 (Open): Document Settings: DFMEA document:Rules 6 and 7 are missing
- 02:14 PM Bug #13556 (Resolved): If the primary and alternate address are same, Instead of entering details again include an option to get the same address in the alternate address field.
- 11:46 AM Bug #14051 (Resolved): Revision date in DFMEA got highlighted but not included as a finding
- Updated within last 3 months of the PSW (4,L)- This is Rev date finding. Due to this cell hiligted.
Also available in: Atom