Activity
From 03/03/2018 to 04/01/2018
03/27/2018
- 07:00 AM Bug #4605 (Resolved): Customer Complaint, Warranty format, Line patrol, Inline process : In all the forms while copying and pasting drop down field to manual entry text it is pasting the number in text box (it is for all manual entry text field)
- please discuss riswan sir dropdown field value not copy in spread control.
- 06:58 AM Usability #5096 (Resolved): While attaching the document of (TYPE FILE) in Attach file columns of warranty format, line patrol, customer complaint, that time document is not getting attached.
- As i discussed riswan sir only upload valid file format otherwise i shown alert message.
- 06:32 AM Bug #5101 (Resolved): In SSRS Daily PPM QCIR report, the value of PPM in case of "Band cable inspection" process is displaying incorrect value.
- 06:31 AM Bug #5124 (Resolved): Impact issue of 4375 : On editing the existing range of Lead days and Lead Kms submenu of warranty format, it is allowing to edit the data as duplicate.
- Hi Zunzar Gulhane,
I cannot replicate this issue please give exact scenario.
- 06:23 AM Bug #5126 (Resolved): Impact issue of 5085 : While logging as Admin in QCIR form, then entered inspection qty field is displaying as zero on opening it for the second time.
03/23/2018
- 03:19 PM Usability #5096 (Not Resolved): While attaching the document of (TYPE FILE) in Attach file columns of warranty format, line patrol, customer complaint, that time document is not getting attached.
- As this issue is not fixed, so changing the status.
03/22/2018
- 11:58 AM Bug #5126 (Open): Impact issue of 5085 : While logging as Admin in QCIR form, then entered inspection qty field is displaying as zero on opening it for the second time.
- 11:42 AM Usability #3803 (Closed): Warranty Report: In C/N Code vs Qty tab there is no space between C Code and Vs
03/21/2018
- 06:54 PM Bug #3737 (Closed): Cutting Crimping Report: In Defect Pareto Graph if we segregate by Unit Wise, the Cumulative % displaying wrongly if Defect Type has Same QTY
- 12:02 PM Bug #3737 (Resolved): Cutting Crimping Report: In Defect Pareto Graph if we segregate by Unit Wise, the Cumulative % displaying wrongly if Defect Type has Same QTY
- 06:02 PM Bug #4782 (Closed): Line Patrol Report (Measurement of Performance Analysis) : On selection of "unit" in Trellis By filters, "All" in unit filter YTM of one unit is calculating along with another unit so YTM data in tabular representation is displaying incorrect.
- 12:00 PM Bug #4782 (Resolved): Line Patrol Report (Measurement of Performance Analysis) : On selection of "unit" in Trellis By filters, "All" in unit filter YTM of one unit is calculating along with another unit so YTM data in tabular representation is displaying incorrect.
- 04:11 PM Bug #3735 (Closed): Final Inspection Report: In 1st tab Target PPM values are not displaying correctly when entered Multiple Year and Month
- 12:02 PM Bug #3735 (Resolved): Final Inspection Report: In 1st tab Target PPM values are not displaying correctly when entered Multiple Year and Month
- 03:34 PM Bug #3732 (Closed): Final Inspection Report: In 3rd tab Defect Wise PPM for last 3 weeks values are displaying wrongly.
- 12:08 PM Bug #3732 (Resolved): Final Inspection Report: In 3rd tab Defect Wise PPM for last 3 weeks values are displaying wrongly.
- 02:05 PM Bug #3731 (Closed): Final Inspection Report: In 2nd Tab Defect Pareto, Defect % values are displaying wrongly
- 12:09 PM Bug #3731 (Resolved): Final Inspection Report: In 2nd Tab Defect Pareto, Defect % values are displaying wrongly
- 12:01 PM Usability #3803 (Resolved): Warranty Report: In C/N Code vs Qty tab there is no space between C Code and Vs
03/20/2018
- 06:24 PM Bug #4550 (Closed): Customer Complaint, Warranty format, Line patrol, Inline process : If we enter more than 6 characters in certain fields of Customer Complaint, Warranty format, Line patrol, Inline process then it is displaying an incorrect alert message.
- 06:16 PM Bug #4623 (Closed): Problem in ALC selection Dropdown in Line patrol.
- 05:54 PM Bug #3734 (Closed): Final Inspection Report: In Full Data tab under Model Header Column Model Name is not displaying.
- 05:36 PM Bug #5126 (Resolved): Impact issue of 5085 : While logging as Admin in QCIR form, then entered inspection qty field is displaying as zero on opening it for the second time.
- Impact issue of 5085 : While logging as Admin in QCIR form, then entered inspection qty field is displaying as zero o...
- 04:56 PM Unit Level and Cosmetic Issues #3720 (Closed): In Line Patrol Report Under Model drop down, Model Name + Model Code is displayed.
- 03:26 PM Bug #4182 (Closed): Line Patrol: In Full Data Tab, Unit Column is not displayed.
- 03:16 PM Bug #5124 (Open): Impact issue of 4375 : On editing the existing range of Lead days and Lead Kms submenu of warranty format, it is allowing to edit the data as duplicate.
- 11:50 AM Bug #5124 (Resolved): Impact issue of 4375 : On editing the existing range of Lead days and Lead Kms submenu of warranty format, it is allowing to edit the data as duplicate.
- Impact issue of 4375 : On editing the existing range of Lead days and Lead Kms submenu of warranty format, it is allo...
- 12:59 PM Bug #3698 (Closed): In Line Patrol Form, ALC data are displaying based on Part No whereas ALC data should display based on Model + Part Name
- As per the developer comment closing this issue.
- 12:59 PM Bug #3698: In Line Patrol Form, ALC data are displaying based on Part No whereas ALC data should display based on Model + Part Name
- As per the previous requirement it was an issue, received the change in requirement on 06-02-2018 and it is working f...
- 12:24 PM Bug #4368 (Closed): Warranty Format & Line Patrol Forms: When New Row is inserted extra header column of "Details", "Part NoID" and "ALCID" are displayed.
- 12:14 PM Bug #4453 (Reopen): 1st select the Month then Select the Year then Duplicate Month Entry is allowing
- This is not fixed, Duplicate year and month is allowing on next page of
1.Sales Details
2.PPM Target Details
3.Qu... - 11:59 AM Bug #4605: Customer Complaint, Warranty format, Line patrol, Inline process : In all the forms while copying and pasting drop down field to manual entry text it is pasting the number in text box (it is for all manual entry text field)
- Dear Sakhtivel,
I have checked this issue one more time from my end and I could see that this is an issue, for you... - 11:53 AM Bug #4605 (Reopen): Customer Complaint, Warranty format, Line patrol, Inline process : In all the forms while copying and pasting drop down field to manual entry text it is pasting the number in text box (it is for all manual entry text field)
- 11:50 AM Bug #4375 (Closed): Warranty Format Forms: When the Lead Days & Lead KMs data is deleted in Lead Type, In Warranty Form enter the Lead Days & Lead KMs, Deleted input range is displayed.
- Above mentioned issue is fixed but the impact has occurred and new issue has been reported (Bug# 5124 )
- 11:36 AM Bug #3699: Responsibility Form should display in Master Form whereas it is displaying in Line Patrol Form
- This is an issue which developer has fixed. So Responsible unit is a common master for line patrol and warranty forma...
- 11:17 AM Bug #3699 (Closed): Responsibility Form should display in Master Form whereas it is displaying in Line Patrol Form
03/19/2018
- 05:54 PM Bug #4441 (Not Resolved): When Unit is deleted from Unit Master form, then QCIR and Cutting & Crimping Forms getting an server error,
- Still not fixed
- 05:53 PM Unit Level and Cosmetic Issues #4454 (Closed): In PPM Target Details Menu, Real Value should accept for (Warranty Target (%), CS 10000 Target (%) and RS 10000 Target (%))
- 05:52 PM Bug #4550 (Not Resolved): Customer Complaint, Warranty format, Line patrol, Inline process : If we enter more than 6 characters in certain fields of Customer Complaint, Warranty format, Line patrol, Inline process then it is displaying an incorrect alert message.
- 05:50 PM Bug #4601 (Closed): Warranty format form: In warranty format form if we enter the invalid data, on pressing tab button it is displaying the alert message two times.
- 05:49 PM Bug #4626 (Closed): customer complaints not able to retrieve the date after clicking on "details" hyperlink
- 05:46 PM Bug #4630 (Closed): Inline Process : On selection of unit and model name, line name is not displaying in QCIR form.
- 05:45 PM Bug #5080 (Closed): Target Inline Details Master ( Inline Process ) : In Target Inline details master, QCIR and CC form is accepting the duplicate entry for unit, year and month.
- 05:45 PM Bug #5084 (Closed): Line Patrol Form: All the Defect Code is displayed. Please see the scenario in description
- 05:44 PM Bug #5085 (Closed): KIML Audit : While logging as a Audit then unit, process, model, line name is hard coded so not able to view the data as per the units.
- 05:42 PM Usability #5097 (Closed): On clicking the imported document, Download button has grammatical mistake. Alphabet "L" in download button should be in lower case.
- 05:42 PM Usability #5098 (Closed): On Deletion of imported document in Customer complaint, warranty format, line patrol forms not displaying an alert message "Deleted Successfully". Also while importing the document it is displaying as "inserted successfully, but it should be "Uploadedsuc"
- 05:42 PM Usability #5099 (Closed): In Customer complaint, warranty format, Line Patrol form on clicking attach button of attach file column without selecting any file is displaying incorrect alert message "
- 05:42 PM Unit Level and Cosmetic Issues #5104 (Closed): While selecting the empty drop down in all forms as well as master it is displaying the value as 0 on pressing tab button.
- 05:42 PM Bug #5105 (Closed): While selecting the empty space in partname dropdown of warranty format form, it is not displaying the empty space.
- 05:40 PM Bug #5103 (Closed): Cutting & crimping publish report : On clicking publish report button of cutting and crimping report displaying the message as published successfully, but not visible in docpro actions page so as to approve it.
- 05:38 PM Bug #4453 (Closed): 1st select the Month then Select the Year then Duplicate Month Entry is allowing
- 05:38 PM Bug #5078 (Closed): Defect Type Master and Line Patrol form : On Entering the defect code in defect type master, again clicking on Defect type master defect code is getting deleted. In Line patrol form on selection of defect type not able to select the defect code.
- 05:38 PM Bug #4624 (Closed): ALC displays blank even after it is mapped.
- 05:37 PM Bug #4623 (Not Resolved): Problem in ALC selection Dropdown in Line patrol.
- 12:56 PM Bug #4623: Problem in ALC selection Dropdown in Line patrol.
- There is an impact, if the length of ALC in master is more than 13 characters that time data in line patrol form is d...
- 05:37 PM Bug #4608 (Closed): Warranty format form : On updating dealer code in dealer code master of warranty format form then coming back to warranty format form displays the server error message.
- 05:37 PM Bug #4606 (Not Resolved): In line Process : In QCIR, DDR and cutting and crimpling submenu if we select the previous date then without selection of any data then clicking on submit button shows EWQIMS server error message.
- 11:59 AM Bug #4606: In line Process : In QCIR, DDR and cutting and crimpling submenu if we select the previous date then without selection of any data then clicking on submit button shows EWQIMS server error message.
- On changing all the process of QCIR to Cutting and crimping and then going back to QCIR form is displaying the Server...
- 05:36 PM Bug #4604 (Closed): Warranty format Form : In lead days and Km's master on selection of lead type as Lead km's then pressing ctrl+delete key the screen is moving automatically to lead days type.
- 05:36 PM Bug #4605 (Closed): Customer Complaint, Warranty format, Line patrol, Inline process : In all the forms while copying and pasting drop down field to manual entry text it is pasting the number in text box (it is for all manual entry text field)
03/16/2018
- 09:06 PM Bug #4453 (Resolved): 1st select the Month then Select the Year then Duplicate Month Entry is allowing
- 04:44 PM Bug #5105 (Resolved): While selecting the empty space in partname dropdown of warranty format form, it is not displaying the empty space.
- 10:36 AM Bug #5105 (Open): While selecting the empty space in partname dropdown of warranty format form, it is not displaying the empty space.
- 04:44 PM Unit Level and Cosmetic Issues #5104 (Resolved): While selecting the empty drop down in all forms as well as master it is displaying the value as 0 on pressing tab button.
- 10:36 AM Unit Level and Cosmetic Issues #5104 (Open): While selecting the empty drop down in all forms as well as master it is displaying the value as 0 on pressing tab button.
- 04:40 PM Bug #5103 (Resolved): Cutting & crimping publish report : On clicking publish report button of cutting and crimping report displaying the message as published successfully, but not visible in docpro actions page so as to approve it.
- 10:36 AM Bug #5103 (Open): Cutting & crimping publish report : On clicking publish report button of cutting and crimping report displaying the message as published successfully, but not visible in docpro actions page so as to approve it.
- 04:40 PM Usability #5099 (Resolved): In Customer complaint, warranty format, Line Patrol form on clicking attach button of attach file column without selecting any file is displaying incorrect alert message "
- 10:36 AM Usability #5099 (Open): In Customer complaint, warranty format, Line Patrol form on clicking attach button of attach file column without selecting any file is displaying incorrect alert message "
- 04:39 PM Usability #5098 (Resolved): On Deletion of imported document in Customer complaint, warranty format, line patrol forms not displaying an alert message "Deleted Successfully". Also while importing the document it is displaying as "inserted successfully, but it should be "Uploadedsuc"
- 10:36 AM Usability #5098 (Open): On Deletion of imported document in Customer complaint, warranty format, line patrol forms not displaying an alert message "Deleted Successfully". Also while importing the document it is displaying as "inserted successfully, but it should be "Uploadedsuc"
- 04:39 PM Usability #5097 (Resolved): On clicking the imported document, Download button has grammatical mistake. Alphabet "L" in download button should be in lower case.
- 10:36 AM Usability #5097 (Open): On clicking the imported document, Download button has grammatical mistake. Alphabet "L" in download button should be in lower case.
- 04:36 PM Usability #5096 (Resolved): While attaching the document of (TYPE FILE) in Attach file columns of warranty format, line patrol, customer complaint, that time document is not getting attached.
- This is not an issue because it is a file and without extension not upload file control. Please discussed riswan sir.
- 03:50 PM Bug #5078 (Resolved): Defect Type Master and Line Patrol form : On Entering the defect code in defect type master, again clicking on Defect type master defect code is getting deleted. In Line patrol form on selection of defect type not able to select the defect code.
- 03:48 PM Bug #4624 (Resolved): ALC displays blank even after it is mapped.
- 02:36 PM Bug #4623 (Resolved): Problem in ALC selection Dropdown in Line patrol.
- This is not an issue because every partno contains unique alc value.
- 02:34 PM Bug #4608 (Resolved): Warranty format form : On updating dealer code in dealer code master of warranty format form then coming back to warranty format form displays the server error message.
- 02:07 PM Bug #4606 (Resolved): In line Process : In QCIR, DDR and cutting and crimpling submenu if we select the previous date then without selection of any data then clicking on submit button shows EWQIMS server error message.
- 02:04 PM Bug #4605 (Resolved): Customer Complaint, Warranty format, Line patrol, Inline process : In all the forms while copying and pasting drop down field to manual entry text it is pasting the number in text box (it is for all manual entry text field)
- Hi Zunzar Gulhane,
This is not an issue.
1. Drop Down list item value not copy. - 12:57 PM Bug #4604 (Resolved): Warranty format Form : In lead days and Km's master on selection of lead type as Lead km's then pressing ctrl+delete key the screen is moving automatically to lead days type.
- Above issue has been fixed.
- 10:36 AM Bug #5101 (Open): In SSRS Daily PPM QCIR report, the value of PPM in case of "Band cable inspection" process is displaying incorrect value.
- 01:42 AM Bug #5084 (Resolved): Line Patrol Form: All the Defect Code is displayed. Please see the scenario in description
- 01:41 AM Bug #5080 (Resolved): Target Inline Details Master ( Inline Process ) : In Target Inline details master, QCIR and CC form is accepting the duplicate entry for unit, year and month.
- 01:39 AM Bug #5085 (Resolved): KIML Audit : While logging as a Audit then unit, process, model, line name is hard coded so not able to view the data as per the units.
- 01:33 AM Bug #4626 (Resolved): customer complaints not able to retrieve the date after clicking on "details" hyperlink
- 01:31 AM Bug #4630 (Resolved): Inline Process : On selection of unit and model name, line name is not displaying in QCIR form.
- 01:25 AM Bug #3699 (Resolved): Responsibility Form should display in Master Form whereas it is displaying in Line Patrol Form
- This is not an issue because Responsibility Form using both warranty and line patrol.
- 01:21 AM Unit Level and Cosmetic Issues #3720 (Resolved): In Line Patrol Report Under Model drop down, Model Name + Model Code is displayed.
- 01:08 AM Bug #4550 (Resolved): Customer Complaint, Warranty format, Line patrol, Inline process : If we enter more than 6 characters in certain fields of Customer Complaint, Warranty format, Line patrol, Inline process then it is displaying an incorrect alert message.
- This is a default error message forspread control.
- 01:07 AM Bug #4601 (Resolved): Warranty format form: In warranty format form if we enter the invalid data, on pressing tab button it is displaying the alert message two times.
03/15/2018
- 07:22 PM Bug #5105 (Closed): While selecting the empty space in partname dropdown of warranty format form, it is not displaying the empty space.
- While selecting the empty dropdown in part name dropdown of warranty format form, it is not displaying the empty dro...
- 06:38 PM Unit Level and Cosmetic Issues #5104 (Closed): While selecting the empty drop down in all forms as well as master it is displaying the value as 0 on pressing tab button.
- While selecting the empty drop down in all forms as well as master it is displaying the value as 0 on pressing tab b...
- 05:02 PM Bug #5085: KIML Audit : While logging as a Audit then unit, process, model, line name is hard coded so not able to view the data as per the units.
- 1) Mentioned issue is partially fixed, but the inspection qty and total defect qty was enabled.
2) After changing th... - 03:31 PM Bug #5103 (Closed): Cutting & crimping publish report : On clicking publish report button of cutting and crimping report displaying the message as published successfully, but not visible in docpro actions page so as to approve it.
- Cutting & crimping publish report : On clicking publish report button of cutting and crimping report displaying the m...
03/14/2018
- 09:30 PM Bug #5101: In SSRS Daily PPM QCIR report, the value of PPM in case of "Band cable inspection" process is displaying incorrect value.
- Please ignore the first 3 steps.
- 06:58 PM Bug #5101 (Resolved): In SSRS Daily PPM QCIR report, the value of PPM in case of "Band cable inspection" process is displaying incorrect value.
- In SSRS Daily PPM QCIR report, the value of PPM in case of "Band cable inspection" process is displaying incorrect va...
- 01:10 PM Usability #5099 (Closed): In Customer complaint, warranty format, Line Patrol form on clicking attach button of attach file column without selecting any file is displaying incorrect alert message "
- In Customer complaint, warranty format, Line Patrol form on clicking attach button of attach file column without sele...
- 01:03 PM Usability #5098 (Closed): On Deletion of imported document in Customer complaint, warranty format, line patrol forms not displaying an alert message "Deleted Successfully". Also while importing the document it is displaying as "inserted successfully, but it should be "Uploadedsuc"
- On Deletion of imported document in Customer complaint, warranty format, line patrol forms not displaying an alert me...
- 12:50 PM Usability #5097 (Closed): On clicking the imported document, Download button has grammatical mistake. Alphabet "L" in download button should be in lower case.
- On clicking the imported document, Download button has grammatical mistake. Alphabet "L" in download button should be...
- 10:27 AM Usability #5096 (Open): While attaching the document of (TYPE FILE) in Attach file columns of warranty format, line patrol, customer complaint, that time document is not getting attached.
- 10:27 AM Bug #5085 (Open): KIML Audit : While logging as a Audit then unit, process, model, line name is hard coded so not able to view the data as per the units.
- 10:27 AM Bug #5084 (Open): Line Patrol Form: All the Defect Code is displayed. Please see the scenario in description
- 10:27 AM Bug #5080 (Open): Target Inline Details Master ( Inline Process ) : In Target Inline details master, QCIR and CC form is accepting the duplicate entry for unit, year and month.
- 10:27 AM Bug #5078 (Open): Defect Type Master and Line Patrol form : On Entering the defect code in defect type master, again clicking on Defect type master defect code is getting deleted. In Line patrol form on selection of defect type not able to select the defect code.
03/13/2018
- 05:10 PM Usability #5096 (Resolved): While attaching the document of (TYPE FILE) in Attach file columns of warranty format, line patrol, customer complaint, that time document is not getting attached.
- While attaching the document of (TYPE FILE) in Attach file columns of warranty format, line patrol, customer complain...
- 12:39 AM Unit Level and Cosmetic Issues #4454 (Resolved): In PPM Target Details Menu, Real Value should accept for (Warranty Target (%), CS 10000 Target (%) and RS 10000 Target (%))
- 12:38 AM Bug #4441 (Resolved): When Unit is deleted from Unit Master form, then QCIR and Cutting & Crimping Forms getting an server error,
- 12:38 AM Bug #4375 (Resolved): Warranty Format Forms: When the Lead Days & Lead KMs data is deleted in Lead Type, In Warranty Form enter the Lead Days & Lead KMs, Deleted input range is displayed.
- 12:37 AM Bug #4368 (Resolved): Warranty Format & Line Patrol Forms: When New Row is inserted extra header column of "Details", "Part NoID" and "ALCID" are displayed.
- 12:36 AM Bug #4182 (Resolved): Line Patrol: In Full Data Tab, Unit Column is not displayed.
- 12:36 AM Bug #3734 (Resolved): Final Inspection Report: In Full Data tab under Model Header Column Model Name is not displaying.
- 12:32 AM Bug #3698 (Resolved): In Line Patrol Form, ALC data are displaying based on Part No whereas ALC data should display based on Model + Part Name
03/11/2018
- 06:47 PM Bug #5085 (Closed): KIML Audit : While logging as a Audit then unit, process, model, line name is hard coded so not able to view the data as per the units.
- KIML Audit : While logging as a Audit then unit, process, model, line name is hard coded so not able to view the data...
03/10/2018
- 03:56 PM Bug #3175 (Closed): In Master Form-Defect Type->Defect Code, Defect Code entered data is not getting saved.
- This issue was reported by zhunzar in the description of bug no (5078). This issue is fixed now. Hence closed
- 03:44 PM Bug #3175 (Resolved): In Master Form-Defect Type->Defect Code, Defect Code entered data is not getting saved.
- 03:32 PM Bug #3175 (Reopen): In Master Form-Defect Type->Defect Code, Defect Code entered data is not getting saved.
- 02:33 PM Bug #5080: Target Inline Details Master ( Inline Process ) : In Target Inline details master, QCIR and CC form is accepting the duplicate entry for unit, year and month.
- Validation alert is displaying correctly but the Unit/Year Field is getting blanked based on the selection.
Scenar... - 02:26 PM Bug #5084 (Closed): Line Patrol Form: All the Defect Code is displayed. Please see the scenario in description
- In Master Form->Defect Type Form->In Defect Type Field enter the Defect Type (TERMINAL BEND), In Defect Code field en...
03/09/2018
- 03:36 PM Bug #5080 (Closed): Target Inline Details Master ( Inline Process ) : In Target Inline details master, QCIR and CC form is accepting the duplicate entry for unit, year and month.
- Target Inline Details Master ( Inline Process ) : In Target Inline details master, QCIR and CC form is accepting the ...
- 12:19 PM Bug #5078: Defect Type Master and Line Patrol form : On Entering the defect code in defect type master, again clicking on Defect type master defect code is getting deleted. In Line patrol form on selection of defect type not able to select the defect code.
- On Assigning Defect code to Line patrol form, then defect code column in Line patrol is displaying as well as able to...
- 11:29 AM Bug #5078 (Closed): Defect Type Master and Line Patrol form : On Entering the defect code in defect type master, again clicking on Defect type master defect code is getting deleted. In Line patrol form on selection of defect type not able to select the defect code.
- Defect Type Master and Line Patrol form : On Entering the defect code in defect type master, again clicking on Defect...
Also available in: Atom