Activity
From 12/13/2017 to 01/11/2018
01/11/2018
- 06:19 PM Bug #3675 (Closed): In CC Report in 1st tab under Month Header Column, there is no proper sorting
- Issue Closed on 11-01-2018
- 04:42 PM Bug #3675 (Resolved): In CC Report in 1st tab under Month Header Column, there is no proper sorting
- 06:17 PM Bug #3674 (Closed): In CC Report under Filter option there is no filter option for Month Field and also in filter if enter month then "EFFECTIVENESS MONITORING" data is display.
- Issue Closed on 11-01-2018
- 04:42 PM Bug #3674 (Resolved): In CC Report under Filter option there is no filter option for Month Field and also in filter if enter month then "EFFECTIVENESS MONITORING" data is display.
- 06:15 PM Bug #3670 (Closed): In CC Report in 1st tab under Filter Option Customer Complaint - Sample Data is displayed whereas Customer Complaint should display.
- Issue Closed on 11-01-2018
- 04:42 PM Bug #3670 (Resolved): In CC Report in 1st tab under Filter Option Customer Complaint - Sample Data is displayed whereas Customer Complaint should display.
- 06:12 PM Unit Level and Cosmetic Issues #3660 (Closed): Typo Issue: In CC Report when click on Customer PPM tab, title "Cutomer PPM" is displayed.
- Issue Closed on 11-01-2018
- 04:47 PM Unit Level and Cosmetic Issues #3660 (Resolved): Typo Issue: In CC Report when click on Customer PPM tab, title "Cutomer PPM" is displayed.
- 06:10 PM Bug #3658 (Closed): IN CC Report under 3rd and 4th tab PPM Value is displaying wrongly for August month
- Issue Closed on 11-01-2018
- 04:48 PM Bug #3658 (Resolved): IN CC Report under 3rd and 4th tab PPM Value is displaying wrongly for August month
- 06:06 PM Bug #3686 (Closed): In CC Report when two year data is there then YTM value is displaying wrongly.
- Issue Closed on 11-01-2018
- 04:40 PM Bug #3686 (Resolved): In CC Report when two year data is there then YTM value is displaying wrongly.
- 06:02 PM Unit Level and Cosmetic Issues #3654 (Closed): In Customer Complaint Report, comma separator is not used.
- Issue Closed on 11-01-2018
- 04:51 PM Unit Level and Cosmetic Issues #3654 (Resolved): In Customer Complaint Report, comma separator is not used.
- 04:51 PM Unit Level and Cosmetic Issues #3657 (TBD): In CC Report 2nd tab when place mouse over the Actual Qty value then Target value are displayed.
- It's because the mouse is pointing to target values and not Actual Quantity. The actual quantity is comparatively ver...
- 04:47 PM Usability #3664 (TBD): In CC Report under Full Data tab in 1st column S/N+A3:V110 is displayed.
- Both the columns are same. The naming conventions are similar to what is provided by the customers. This may vary bet...
- 04:46 PM Usability #3667 (TBD): In CC Report, Description is in generic text under 1st and 6th tab
- The actual description text can be taken from the customer and will be updated in the report during customer's review
- 04:44 PM Unit Level and Cosmetic Issues #3668 (TBD): In CC Report under Filter title Defect is displayed and in CC Forms Defect Type is displayed.
- Both the fields are same. The naming conventions in the report may change as per the requirement by customer. It has ...
- 04:42 PM Bug #3677 (TBD): In CC Report in all the tab if right click anywhere list of option is displayed if click on Share->Visualization to tibbr option pop up is displayed
- As of now, we can't hide those options
- 04:41 PM Usability #3678 (TBD): In CC Report in all the tab if right click Export table and click on open, and Export table (Without Value Formatting) and click on open "Sorry, Excel Cant open two workbooks with same name at the same time."
- This issue is pretty much self-explanatory. It's because there is already an excel opened with same name
- 04:39 PM Bug #3716 (Resolved): In Line Patrol Report- In 1st tab Target Values are not calculated as expected.
- 04:39 PM Bug #3718 (Resolved): In Line Patrol Report, YTM Value is displaying wrongly for August Month
- 04:39 PM Bug #3719 (Resolved): In Line Patrol Report 2nd tab (CM EFF %), Report is not generated.
- 04:37 PM Usability #3721 (Resolved): In all the Reports, in the graph tool tip need to remove the Column Names
- 04:37 PM Bug #3722 (Resolved): In Line Patrol Report, Unit Header Column is missing.
- 04:37 PM Bug #3723 (TBD): In Line Patrol Report, 6th tab (Full Data) Target Value is displaying twice for Unit ID 2, in Line Patrol Form only one "Unit ID 2" data is there.
- Need to properly enter the value in Target details master. There shouldn't be multiple target entries for the same Ye...
- 04:35 PM Bug #3727 (Resolved): Missing Data is displayed while clicking on Warranty Report.
- 04:35 PM Bug #3728 (Resolved): In Cutting and Crimping Report under Full Data Tab, Data's are displaying which are not entered in the CCI Forms
- 04:34 PM Bug #3729 (Resolved): In Final Inspection Report, Data is not generating/displaying in the Final Inspection Report
- 04:34 PM Bug #3730 (Resolved): Final Inspection Report: In 1st tab Actual PPM values are displaying wrongly.
- 04:34 PM Bug #3731 (Resolved): Final Inspection Report: In 2nd Tab Defect Pareto, Defect % values are displaying wrongly
- 04:34 PM Unit Level and Cosmetic Issues #3733 (Resolved): Final Inspection Report: Comma separator should not display for PPM Values (1 and 3 tab)
- 04:32 PM Bug #3735 (Resolved): Final Inspection Report: In 1st tab Target PPM values are not displaying correctly when entered Multiple Year and Month
- 04:31 PM Bug #3736 (TBD): Final Inspection Report: In Top Defect producing Line (Last 3 Weeks), Values are not displaying as expected.
- Couldn't replicate
- 04:29 PM Bug #3737 (Resolved): Cutting Crimping Report: In Defect Pareto Graph if we segregate by Unit Wise, the Cumulative % displaying wrongly if Defect Type has Same QTY
- 04:29 PM Bug #3738 (Resolved): Cutting Crimping Report: In Top Defects tab data are displaying based on Process Name but the title is displayed as Line Wise – Top Defects
- 04:29 PM Bug #3739 (TBD): Cutting Crimping Report: In Top Defect tab for Process Name “Circuit Inspection” Week 3 Value displayed wrongly.
- Couldn't see any issue here
- 04:27 PM Unit Level and Cosmetic Issues #3740 (Resolved): Final Inspection and Cutting Crimping Reports: In Filters Option and in Full Data under Month Header Column, Numbers format are displayed.
- 04:27 PM Bug #3741 (TBD): Final Inspection Report: In Year 2017 only 52 Weeks is there but in Weekly PPM Trend 53 Weeks are displayed.
- It's displaying correctly, the year has got 53 weeks.
- 04:22 PM Bug #3742 (Resolved): In 1st tab, by default Claim Type "Warranty" is not selected.
- 04:21 PM Usability #3743 (Resolved): Sales Cost as well as wherever Cost display need to provide Comma Separator and in PPM and YTM no need of comma seperator
- 04:21 PM Bug #3744 (Resolved): Warranty Report: In 1st Tab Total Qty, Total Cost values are not displayed.
- 03:51 PM Bug #3745 (Resolved): Warranty Report: In CS10000 and RS 10000 Graph Manual and YTM graph are not displayed Monthwise as well as Yearwise.
- 03:51 PM Bug #3746 (Resolved): Warranty Report: In CS10000 and RS 10000 Graph Target values are displaying wrongly.
- 03:50 PM Bug #3797 (Resolved): Warranty Report: YTM graph is not displayed for Month and Yearwise
- 03:50 PM Bug #3798 (Resolved): Warranty Report: Actual PPM values are displaying wrongly
- 03:49 PM Bug #3799 (Resolved): Warranty Report: Target PPM values are displaying wrongly
- 03:49 PM Bug #3800 (Resolved): Warranty Report: In QVOC "KIML PART" and "NOT KIML PART" values are not displaying.
- 03:46 PM Unit Level and Cosmetic Issues #3801 (Resolved): Warranty Report: N Code vs Qty section C Code Header is displayed
- 03:44 PM Usability #3803 (Resolved): Warranty Report: In C/N Code vs Qty tab there is no space between C Code and Vs
01/05/2018
- 11:49 AM Bug #3727 (Open): Missing Data is displayed while clicking on Warranty Report.
- 11:49 AM Usability #3803 (Open): Warranty Report: In C/N Code vs Qty tab there is no space between C Code and Vs
- 11:49 AM Unit Level and Cosmetic Issues #3801 (Open): Warranty Report: N Code vs Qty section C Code Header is displayed
- 11:49 AM Bug #3800 (Open): Warranty Report: In QVOC "KIML PART" and "NOT KIML PART" values are not displaying.
- 11:49 AM Bug #3799 (Open): Warranty Report: Target PPM values are displaying wrongly
- 11:49 AM Bug #3798 (Open): Warranty Report: Actual PPM values are displaying wrongly
- 11:49 AM Bug #3797 (Open): Warranty Report: YTM graph is not displayed for Month and Yearwise
- 11:49 AM Bug #3746 (Open): Warranty Report: In CS10000 and RS 10000 Graph Target values are displaying wrongly.
- 11:49 AM Bug #3745 (Open): Warranty Report: In CS10000 and RS 10000 Graph Manual and YTM graph are not displayed Monthwise as well as Yearwise.
- 11:49 AM Bug #3744 (Open): Warranty Report: In 1st Tab Total Qty, Total Cost values are not displayed.
- 11:49 AM Usability #3743 (Open): Sales Cost as well as wherever Cost display need to provide Comma Separator and in PPM and YTM no need of comma seperator
- 11:49 AM Bug #3742 (Open): In 1st tab, by default Claim Type "Warranty" is not selected.
- 11:49 AM Bug #3741 (Open): Final Inspection Report: In Year 2017 only 52 Weeks is there but in Weekly PPM Trend 53 Weeks are displayed.
- 11:49 AM Unit Level and Cosmetic Issues #3740 (Open): Final Inspection and Cutting Crimping Reports: In Filters Option and in Full Data under Month Header Column, Numbers format are displayed.
- 11:49 AM Bug #3739 (Open): Cutting Crimping Report: In Top Defect tab for Process Name “Circuit Inspection” Week 3 Value displayed wrongly.
- 11:49 AM Bug #3738 (Open): Cutting Crimping Report: In Top Defects tab data are displaying based on Process Name but the title is displayed as Line Wise – Top Defects
- 11:49 AM Bug #3737 (Open): Cutting Crimping Report: In Defect Pareto Graph if we segregate by Unit Wise, the Cumulative % displaying wrongly if Defect Type has Same QTY
- 11:49 AM Bug #3736 (Open): Final Inspection Report: In Top Defect producing Line (Last 3 Weeks), Values are not displaying as expected.
- 11:49 AM Bug #3735 (Open): Final Inspection Report: In 1st tab Target PPM values are not displaying correctly when entered Multiple Year and Month
- 11:49 AM Bug #3734 (Open): Final Inspection Report: In Full Data tab under Model Header Column Model Name is not displaying.
- 11:49 AM Unit Level and Cosmetic Issues #3733 (Open): Final Inspection Report: Comma separator should not display for PPM Values (1 and 3 tab)
- 11:49 AM Bug #3732 (Open): Final Inspection Report: In 3rd tab Defect Wise PPM for last 3 weeks values are displaying wrongly.
- 11:49 AM Bug #3731 (Open): Final Inspection Report: In 2nd Tab Defect Pareto, Defect % values are displaying wrongly
- 11:49 AM Bug #3730 (Open): Final Inspection Report: In 1st tab Actual PPM values are displaying wrongly.
- 11:49 AM Bug #3729 (Open): In Final Inspection Report, Data is not generating/displaying in the Final Inspection Report
- 11:49 AM Bug #3728 (Open): In Cutting and Crimping Report under Full Data Tab, Data's are displaying which are not entered in the CCI Forms
01/03/2018
- 03:32 PM Usability #3803 (Closed): Warranty Report: In C/N Code vs Qty tab there is no space between C Code and Vs
- Warranty Report: In C/N Code vs Qty tab there is no space between C Code and Vs and same for N Code
- 03:25 PM Unit Level and Cosmetic Issues #3801 (Closed): Warranty Report: N Code vs Qty section C Code Header is displayed
- Warranty Report: In C/N Code Vs Qty tab N Code vs Qty section C Code Header is displayed whereas N Code should display
- 03:21 PM Bug #3800 (Closed): Warranty Report: In QVOC "KIML PART" and "NOT KIML PART" values are not displaying.
- Warranty Report: In QVOC KIML PART and NOT KIML PART values are not displaying.
- 03:18 PM Bug #3799 (Closed): Warranty Report: Target PPM values are displaying wrongly
- Warranty Report: In Actual Vs Target PPM- Target PPM values are displaying wrongly
- 03:15 PM Bug #3798 (Closed): Warranty Report: Actual PPM values are displaying wrongly
- Warranty Report: In Actual Vs Target PPM-Actual PPM values are displaying wrongly
- 03:13 PM Bug #3797 (Closed): Warranty Report: YTM graph is not displayed for Month and Yearwise
- Warranty Report: In Actual Vs Target PPM. YTM graph is not displayed for Month and Year wise
01/02/2018
- 06:55 PM Bug #3746 (Closed): Warranty Report: In CS10000 and RS 10000 Graph Target values are displaying wrongly.
- Warranty Report: In CS10000 and RS 10000 Graph Target values are displaying wrongly.
- 06:54 PM Bug #3745 (Closed): Warranty Report: In CS10000 and RS 10000 Graph Manual and YTM graph are not displayed Monthwise as well as Yearwise.
- Warranty Report: In CS10000 and RS 10000 Graph Manual and YTM graph are not displayed Monthwise as well as Yearwise.
- 06:52 PM Bug #3744 (Closed): Warranty Report: In 1st Tab Total Qty, Total Cost values are not displayed.
- Warranty Report: In 1st Tab Total Qty, Total Cost values are not displayed.
- 06:51 PM Usability #3743 (Closed): Sales Cost as well as wherever Cost display need to provide Comma Separator and in PPM and YTM no need of comma seperator
- Sales Cost as well as wherever Cost display need to provide Comma Separator and in PPM and YTM no need of comma separ...
- 06:49 PM Bug #3742 (Closed): In 1st tab, by default Claim Type "Warranty" is not selected.
- In 1st tab, by default Claim Type "Warranty" is not selected.
- 12:16 PM Bug #3741 (TBD): Final Inspection Report: In Year 2017 only 52 Weeks is there but in Weekly PPM Trend 53 Weeks are displayed.
- Final Inspection Report: In Year 2017 only 52 Weeks is there but in Weekly PPM Trend 53 Weeks are displayed.
- 12:11 PM Bug #3737: Cutting Crimping Report: In Defect Pareto Graph if we segregate by Unit Wise, the Cumulative % displaying wrongly if Defect Type has Same QTY
- In Final Inspection Report also the above mentioned Issue is there.
- 11:26 AM Bug #3737 (Closed): Cutting Crimping Report: In Defect Pareto Graph if we segregate by Unit Wise, the Cumulative % displaying wrongly if Defect Type has Same QTY
- Cutting Crimping Report: In Defect Pareto Graph if we segregate by Unit Wise, the Cumulative % displaying wrongly if...
- 12:10 PM Unit Level and Cosmetic Issues #3740 (Closed): Final Inspection and Cutting Crimping Reports: In Filters Option and in Full Data under Month Header Column, Numbers format are displayed.
- Final Inspection and Cutting Crimping Reports: In Filters Option and in Full Data under Month Header Column, Numbers ...
- 11:31 AM Bug #3739 (TBD): Cutting Crimping Report: In Top Defect tab for Process Name “Circuit Inspection” Week 3 Value displayed wrongly.
- Cutting Crimping Report: In Top Defect tab for Process Name “Circuit Inspection” Week 3 Value displayed wrongly.
- 11:29 AM Bug #3738 (Closed): Cutting Crimping Report: In Top Defects tab data are displaying based on Process Name but the title is displayed as Line Wise – Top Defects
- Cutting Crimping Report: In Top Defects tab data are displaying based on Process Name but the title is displayed as L...
12/28/2017
- 12:51 PM Bug #3736 (TBD): Final Inspection Report: In Top Defect producing Line (Last 3 Weeks), Values are not displaying as expected.
- Final Inspection Report: In Top Defect producing Line (Last 3 Weeks), Values are not displaying as expected.
- 12:44 PM Bug #3735 (Closed): Final Inspection Report: In 1st tab Target PPM values are not displaying correctly when entered Multiple Year and Month
- Final Inspection Report: In 1st tab Target PPM values are not displaying correctly when entered Multiple Year and Month.
- 12:12 PM Bug #3734 (Closed): Final Inspection Report: In Full Data tab under Model Header Column Model Name is not displaying.
- Final Inspection Report: In Full Data tab under Model Header Column Model Name is not displaying.
- 10:42 AM Unit Level and Cosmetic Issues #3733 (Closed): Final Inspection Report: Comma separator should not display for PPM Values (1 and 3 tab)
- Final Inspection Report: Comma separator should not display for PPM Values (1 and 3 tab)
- 10:37 AM Bug #3732 (Closed): Final Inspection Report: In 3rd tab Defect Wise PPM for last 3 weeks values are displaying wrongly.
- Final Inspection Report: In 3rd tab Defect Wise PPM for last 3 weeks values are displaying wrongly.
- 10:33 AM Bug #3731 (Closed): Final Inspection Report: In 2nd Tab Defect Pareto, Defect % values are displaying wrongly
- Final Inspection Report: In 2nd Tab Defect Pareto, Defect % values are displaying wrongly
- 10:30 AM Bug #3730 (Closed): Final Inspection Report: In 1st tab Actual PPM values are displaying wrongly.
- Final Inspection Report: In 1st tab Actual PPM values are displaying wrongly.
12/27/2017
- 01:59 PM Bug #3729 (Closed): In Final Inspection Report, Data is not generating/displaying in the Final Inspection Report
- In Final Inspection Report, Data is not generating/displaying in the Final Inspection Report, In Forms entered the data.
12/26/2017
- 03:39 PM Bug #3728 (Closed): In Cutting and Crimping Report under Full Data Tab, Data's are displaying which are not entered in the CCI Forms
- In Cutting and Crimping Report under Full Data Tab, Data's are displaying which are not entered in the CCI Forms.
... - 03:27 PM Bug #3727 (Closed): Missing Data is displayed while clicking on Warranty Report.
- Missing Data is displayed while clicking on Warranty Report.
Please refer the Screenshot
12/22/2017
- 10:31 AM Bug #3723 (Open): In Line Patrol Report, 6th tab (Full Data) Target Value is displaying twice for Unit ID 2, in Line Patrol Form only one "Unit ID 2" data is there.
- 10:31 AM Bug #3722 (Open): In Line Patrol Report, Unit Header Column is missing.
- 10:31 AM Usability #3721 (Open): In all the Reports, in the graph tool tip need to remove the Column Names
- 10:31 AM Unit Level and Cosmetic Issues #3720 (Open): In Line Patrol Report Under Model drop down, Model Name + Model Code is displayed.
- 10:31 AM Bug #3719 (Open): In Line Patrol Report 2nd tab (CM EFF %), Report is not generated.
- 10:31 AM Bug #3718 (Open): In Line Patrol Report, YTM Value is displaying wrongly for August Month
- 10:31 AM Bug #3716 (Open): In Line Patrol Report- In 1st tab Target Values are not calculated as expected.
- 10:31 AM Bug #3700 (Open): In all the Forms wherever Date field is displayed if we select the date via keyboard then Date calendar pop is not displayed.
- 10:31 AM Bug #3699 (Open): Responsibility Form should display in Master Form whereas it is displaying in Line Patrol Form
12/20/2017
- 05:28 PM Bug #3723 (TBD): In Line Patrol Report, 6th tab (Full Data) Target Value is displaying twice for Unit ID 2, in Line Patrol Form only one "Unit ID 2" data is there.
- In Line Patrol Report, 6th tab (Full Data) Target Value is displaying twice for Unit ID 2, in Line Patrol Form only o...
- 04:44 PM Bug #3722 (Closed): In Line Patrol Report, Unit Header Column is missing.
- In Line Patrol Report, Unit Header Column is missing, whereas Unit Header Column should display.
- 04:38 PM Usability #3721 (Closed): In all the Reports, in the graph tool tip need to remove the Column Names
- In all the Reports, in the graph tool tip need to remove the Column Names, this issue has been confirmed with riswan ...
- 03:47 PM Unit Level and Cosmetic Issues #3720 (Closed): In Line Patrol Report Under Model drop down, Model Name + Model Code is displayed.
- In Line Patrol Report Under Model, Model Name + Model Code is displayed.
- 02:49 PM Bug #3719 (Closed): In Line Patrol Report 2nd tab (CM EFF %), Report is not generated.
- In Line Patrol Report 2nd tab (CM EFF %), Report is not generated.
In Line Patrol Form for CM Status "Closed" data... - 12:01 PM Bug #3718 (Closed): In Line Patrol Report, YTM Value is displaying wrongly for August Month
- In Line Patrol Report, YTM Value is displaying wrongly for August Month.
Please Refer the Screenshot for the scena...
12/19/2017
- 05:35 PM Bug #3716 (Closed): In Line Patrol Report- In 1st tab Target Values are not calculated as expected.
- Scenario: When there is an Multiple Rows in the combination of Same Year, Same Month and Same Unit in the Line Patrol...
12/14/2017
- 05:59 PM Bug #3700 (Open): In all the Forms wherever Date field is displayed if we select the date via keyboard then Date calendar pop is not displayed.
- 1.Customer Complaint-(Received Date, Submitted Date, CM Approved Date)
2.Warranty Format- (Received Date, Production... - 05:52 PM Bug #3699 (Closed): Responsibility Form should display in Master Form whereas it is displaying in Line Patrol Form
- Responsibility Form should display in Master Form whereas it is displaying in Line Patrol Form
- 05:38 PM Bug #3698 (Open): In Line Patrol Form, ALC data are displaying based on Part No whereas ALC data should display based on Model + Part Name
- 03:18 PM Bug #3698 (Closed): In Line Patrol Form, ALC data are displaying based on Part No whereas ALC data should display based on Model + Part Name
- In Line Patrol Form, ALC data are displaying based on Part No whereas ALC data should display based on Model + Part Name
- 05:29 PM Unit Level and Cosmetic Issues #3217 (Closed): In Validation field error message, Technical terms are displayed.
- Issue closed on 14-12-2017
- 05:27 PM Usability #3662 (Closed): In all the Forms numeric value should be as center justification.
- Issue closed on 14-12-2017
- 11:28 AM Usability #3662 (Resolved): In all the Forms numeric value should be as center justification.
- 05:26 PM Bug #3595 (Closed): In all the Form When the page is refreshed, when using the tab button calendar is not pop up
- Issue closed on 14-12-2017
- 04:14 PM Bug #3594 (Closed): Next to Calendar Field, drop down field is there, place mouse on calendar field and click on tab button and and click on shift + tab button then select the date, the date field is displaying in the drop down field
- Issue closed on 14-12-2017
- 03:44 PM Bug #3640 (Closed): In Lead Days Master form, the End Days value should not be greater then Start Days Value
- Issue closed on 14-12-2017
- 03:40 PM Unit Level and Cosmetic Issues #3641 (Closed): Pagination is not working when the User Pagination size number less then 10
- Issue closed on 14-12-2017
- 03:30 PM Unit Level and Cosmetic Issues #3663 (Closed): In Master Forms under Target Details and Target Details Inline Forms, Month should not be duplicate for the same year.
- Issue closed on 14-12-2017
- 11:28 AM Unit Level and Cosmetic Issues #3663 (Resolved): In Master Forms under Target Details and Target Details Inline Forms, Month should not be duplicate for the same year.
12/13/2017
- 09:02 PM Bug #3640 (Resolved): In Lead Days Master form, the End Days value should not be greater then Start Days Value
- 04:50 PM Bug #3640 (Open): In Lead Days Master form, the End Days value should not be greater then Start Days Value
- 09:02 PM Unit Level and Cosmetic Issues #3641 (Resolved): Pagination is not working when the User Pagination size number less then 10
- 04:50 PM Unit Level and Cosmetic Issues #3641 (Open): Pagination is not working when the User Pagination size number less then 10
- 04:50 PM Bug #3686 (Open): In CC Report when two year data is there then YTM value is displaying wrongly.
- 04:50 PM Usability #3678 (Open): In CC Report in all the tab if right click Export table and click on open, and Export table (Without Value Formatting) and click on open "Sorry, Excel Cant open two workbooks with same name at the same time."
- 04:50 PM Bug #3677 (Open): In CC Report in all the tab if right click anywhere list of option is displayed if click on Share->Visualization to tibbr option pop up is displayed
- 04:50 PM Bug #3675 (Open): In CC Report in 1st tab under Month Header Column, there is no proper sorting
- 04:50 PM Bug #3674 (Open): In CC Report under Filter option there is no filter option for Month Field and also in filter if enter month then "EFFECTIVENESS MONITORING" data is display.
- 04:50 PM Bug #3670 (Open): In CC Report in 1st tab under Filter Option Customer Complaint - Sample Data is displayed whereas Customer Complaint should display.
- 04:50 PM Unit Level and Cosmetic Issues #3668 (Open): In CC Report under Filter title Defect is displayed and in CC Forms Defect Type is displayed.
- 04:50 PM Usability #3667 (Open): In CC Report, Description is in generic text under 1st and 6th tab
- 04:50 PM Usability #3664 (Open): In CC Report under Full Data tab in 1st column S/N+A3:V110 is displayed.
- 04:50 PM Unit Level and Cosmetic Issues #3663 (Open): In Master Forms under Target Details and Target Details Inline Forms, Month should not be duplicate for the same year.
- 04:50 PM Usability #3662 (Open): In all the Forms numeric value should be as center justification.
- 04:50 PM Unit Level and Cosmetic Issues #3660 (Open): Typo Issue: In CC Report when click on Customer PPM tab, title "Cutomer PPM" is displayed.
- 04:50 PM Bug #3658 (Open): IN CC Report under 3rd and 4th tab PPM Value is displaying wrongly for August month
- 04:50 PM Unit Level and Cosmetic Issues #3657 (Open): In CC Report 2nd tab when place mouse over the Actual Qty value then Target value are displayed.
- 04:50 PM Unit Level and Cosmetic Issues #3654 (Open): In Customer Complaint Report, comma separator is not used.
Also available in: Atom