EwQIMS SP650

1) Open to PFMEA
2) Click on Product Characteristic Name column
3)Change the product characteristics to product characteristics from the drop down, if anyother dropdown was selected. ( Risk identified column will display in blue color if any others are selected or will displays in green color)
4) Now change the dropdown accordingly and observe the result in Reisk identified column
5) it will needs to refresh each time to get the changes we made in the dropdown

1) Delete any cell value form the For a Pitem
2) Open With Since data and Time
3) Right click on the cell click on Show Show override/Change level ( which is showing as deleted in corresponding color)
4. Observe Result

1. Open any documents ( Say DFMEA open below)
2. Scroll down till the last
3. Then go up using your mouse scroll button
4.Suddenly the alignment will show like below and then your scroll button also not move further.

1. login in To Aquapro
2. Open any documents
3. use CTRL+F and Search
4. Observe result

1.Open STepup Chart
2. Click on Export Drop down icon
3. Observe Result

NA
The Security is not working on SPPC Segment

• Login to Aqua pro
• Click on DFMEA .
• Observe the result

• GO to Dfmea in Any production Item Select Sev=4 occ+Dec=6
• observe result.

• Go to Sppc tracking sheet from the PI
• Click in dashboard tab
• Observer result.

• Go to PFMEA->remove the Value in SPPC name Column
• See the Risk Identification Column ->"Acceptable" Change to green
• Again add value in Sppc name
• See the Risk Identification Column observe result.

• Go to Sppc TS in SPPC Segment
• Select Characterisic column (Which doesn’t have tolerance value )
• Observe results

• Select any Production Item ->Go to Dfmea ->Open it.
• Enter data in corrective action column and Click the mouse pointer to next column
• Observe results

1.Go to Pfmea -> In Product Characteristic column -> select SPPC Name
2.option displays in dropdown(from SPPC Desgin segment ,From Sppc segment ,product characteristic )
3. click out the column

1. Select Any production item
2. Open DFMEA Document
3. Go to responsibility Column
4. Fill multiple branch with responsibility person
5. Observer results

1.Go to Aquapro module
2.Click Aquapro->main.
3.Click any PI-> Open Any DFMEA and PFMEA.
4.Inside DFMEA Document->Right Click-> print document
4.Right in Sppc tracking Sheet ->Click Publish

1.Go to Aquapro module
2.Click Reports

NANAna

1.Go to Aquapro module
2.Click Aquapro->main.
3.Then logout

1.Go to Aquapro module
2.Click Aquapro->main.
3.click any PI-> select Sppc segement ->map Segment in DFMEA
4.Then go back to PI and open Sppc ts
5.Click on Sppc tab select Sppc segment .

1.Go to Aquapro module
2.Click Aquapro->main.
3.click any PI-> select Sppc Tracking Sheet
4. Enter data in origin value