Actions
Bug #28592
closedSafety Goal - Safe State and Safety Goal Separation Bug When Adding Fault-Tolerant Time Interval and Rationale in the safe state page - No alert in Safety goal page when adding safe state first then Safety goal.
Start date:
07/17/2024
Due date:
% Done:
0%
Estimated time:
Steps To Reproduce:
1.Loh into FST
2.Select safety goals page
3.Add a safe state first
4.MAp a safety goal then.
5.Go to safe state page.
6.Add fault tolerant time interval and rationale for the same safe state.
7.Go to safety goal and observe
MODULES:
FST
Build Cycle:
Cycle 1
Customer:
Issue Dependency:
Dev Commitment to Resolve in::
Description
Adding a safe state first, then a safety goal in the Safety Goal page, then opening the Safe State page and adding a fault-tolerant time interval and rationale against the same safe state causes the safe state and safety goal to be separated into two rows on the Safety Goal page.
Additionally, each time a safe state is created in this manner, it creates branches under the safety goal page.
Files
| safety goal -1.png (50.1 KB) safety goal -1.png | |||
| safe state 1.png (17.8 KB) safe state 1.png | |||
| safety goal -2.png (47.5 KB) safety goal -2.png | |||
| multibranches-safety goal.png (98.1 KB) multibranches-safety goal.png |
Updated by Vani Kunnatheri 11 months ago
Updated by Manivannan Uppiliappan 11 months ago
- Status changed from New to Open
- Assignee changed from chitra Kalangiam to Manivannan Uppiliappan
Updated by Manivannan Uppiliappan 11 months ago
- Status changed from Open to Resolved
Actions