Project

General

Profile

Actions
Copy link

Bug #28501

closed

Refresh Issue: When updating the severity, the AP value is not immediately updated in the Tree view. | When I add optimization by default, it shows 'H' in the Tree view. [Issue#3:Dependency]

Added by Kirubakaran chandran 10 months ago. Updated about 4 hours ago.

Status:
Closed
Priority:
Medium
Assignee:
Manivannan Uppiliappan
Start date:
07/10/2024
Due date:
% Done:

0%

Estimated time:
Steps To Reproduce:

1. Login as AQuA Pro Module Administrator.
2. Click on the EWQIMS icon and select EVAV NPD/APQP Platform.
3. Click on the Products(Aqua Pro) menu.
4. Click on the Design VDA menu.
5. Click on the Failure Analysis menu.
6. Select the Production Item.
7. Add Risk and update the Severity value
8. Observe the result in the tree view

Issue2
8. Add optimization (S-1:O-1:D-1) and click on ok
9. Observe the result

Issue 3:

8. Adding Flow up failure and assign severity
9. Observe the result

MODULES:
VDA
Build Cycle:
Cycle 1
Customer:
Issue Dependency:
SME/Mark, Moved from SP 11.2.0.18 Patches
Dev Commitment to Resolve in::

Description

Issue1: Refresh Issue: When updating the severity (Risk/Effect), the AP value is not immediately updated. However, it is updated after refreshing. (55)

Issue 2: Refresh Issue: When I add optimization by default, it shows 'H', after refreshing displyed properly (56 & 57)

Note: Issue Occurred in Design & Proces VDA

Issue3: Flow up failure effect sevrity value is not considered to determine the AP value. (58)

Files

Download all files
56.png (106 KB) 56.png Kirubakaran chandran, 07/10/2024 03:25 PM
55.png (107 KB) 55.png Kirubakaran chandran, 07/10/2024 03:25 PM
57.png (76.6 KB) 57.png Kirubakaran chandran, 07/10/2024 03:25 PM
58.png (117 KB) 58.png Kirubakaran chandran, 07/10/2024 03:44 PM
Actions
Copy link
 #1

Updated by Kirubakaran chandran 10 months ago

  • Subject changed from Refresh Issue: When updating the severity, the AP value is not immediately updated. | When I add optimization by default, it shows 'H'. to Refresh Issue: When updating the severity, the AP value is not immediately updated in the Tree view. | When I add optimization by default, it shows 'H' in the Tree view.
Actions
Copy link
 #3

Updated by Reng Raj 9 months ago

  • Status changed from New to Open
  • Assignee changed from chitra Kalangiam to Reng Raj
Actions
Copy link
 #4

Updated by chitra Kalangiam 9 months ago

  • Assignee changed from Reng Raj to Manivannan Uppiliappan
Actions
Copy link
 #5

Updated by Manivannan Uppiliappan 9 months ago

Issue1: Fixed

Issue 2: needs to manual Refresh

Issue3: Flow up failure effect sevrity value is not considered to determine the AP value. (58) - discussion need from Nikhil/SME (Chitra and Shankar discussed)

Actions
Copy link
 #6

Updated by Manivannan Uppiliappan 8 months ago

  • Subject changed from Refresh Issue: When updating the severity, the AP value is not immediately updated in the Tree view. | When I add optimization by default, it shows 'H' in the Tree view. to Refresh Issue: When updating the severity, the AP value is not immediately updated in the Tree view. | When I add optimization by default, it shows 'H' in the Tree view. [Issue#3:Dependency]
  • Issue Dependency set to SME/Mark
Actions
Copy link
 #7

Updated by Kirubakaran chandran 5 months ago

  • Project changed from SP 11.2.0.16 Patches to SP 11.2.0.18 Patches
  • Issue Dependency changed from SME/Mark to SME/Mark, Moved from SP 11.2.0.16 Patches

Moved from SP 11.2.0.16 Patches to SP 11.2.0.18 Patches

Actions
Copy link
 #8

Updated by Kirubakaran chandran 6 days ago

  • Project changed from SP 11.2.0.18 Patches to SP 11.3.2.2 Patches
  • Issue Dependency changed from SME/Mark, Moved from SP 11.2.0.16 Patches to SME/Mark, Moved from SP 11.2.0.18 Patches

SME/Mark, Moved from SP 11.2.0.16 Patches to SP 11.2.0.18 to SP 11.3.2.2

Actions
Copy link
 #9

Updated by Manivannan Uppiliappan 5 days ago

  • Status changed from Open to Resolved
Actions
Copy link
 #10

Updated by Kirubakaran chandran about 4 hours ago

  • Status changed from Resolved to Closed

Issue1: Refresh Issue: When updating the severity (Risk/Effect), the AP value is not immediately updated. However, it is updated after refreshing. (55) As per dev team Manual refresh Required to view the current AP Status in the Tree view,

Issue 2: Refresh Issue: When I add optimization by default, it shows 'H', after refreshing displyed properly (56 & 57)

Note: Issue Occurred in Design & Proces VDA

Issue3: Flow up failure effect sevrity value is not considered to determine the AP value. (58)

Issue verified in the 11.3.2.2 and closed

Actions
Copy link

Also available in: Atom PDF