Actions
Bug #24756
closedSafety Mechanism and Diagnostic coverage added in FTA is not updated in FMEDA.(Refer Description)
Start date:
05/31/2022
Due date:
% Done:
0%
Estimated time:
Steps To Reproduce:
1.Login as FST module administrator.
2.Click on Main and select any PI
3.Select FTA and Select Failure
4.Right click on diagram and select Add Probability option
5.Add all data and click OK button
6.Now select FMEDA and observe the Safety mechanism column and Coverage column
7.Observe the calculations
MODULES:
FST
Build Cycle:
Cycle 0
Customer:
Issue Dependency:
Description
Calculations are also not updated properly.
After refreshing, the multi-point value is changed to 0 in FTA
While adding multiple Design Cause it is adding only the last added Cause
Updated by Shankar Narayanan almost 12 years ago
- Project changed from SP 11.0.0.1 Hotfix to SP 11.2.0.2 HF
- Build Cycle changed from Cycle 2 to Cycle 0
Moved from SP11.0.0.1 HF
Updated by Reng Raj almost 12 years ago
- Status changed from Fixed in Dev to Fixed with Hotfix
Updated by chitra Kalangiam almost 3 years ago
- Status changed from Open to Fixed in Dev
Updated by Nikita Dhenge over 1 year ago
- Status changed from Fixed with Hotfix to Resolved
Updated by Shankar Narayanan over 1 year ago
- Status changed from Resolved to Closed
Actions