Project

General

Profile

Actions
Copy link

Bug #24619

closed

Fault Tree Analysis - Add Probability popup displays following error(Refer Description)

Added by Shankar Narayanan about 3 years ago. Updated over 11 years ago.

Status:
Closed
Priority:
High
Assignee:
chitra Kalangiam
Start date:
04/12/2022
Due date:
% Done:

0%

Estimated time:
Steps To Reproduce:

1.Loggin as FST module administrator

2.Click on Main and select any PI

3.Select FTA menu and select Design Failure from the drpdown

4.Now right click on the Diagram and select Add Probability option

5.Observe the FTA note label and safety mechanism table

6.Now add Safety Mechanism and click OK button

7.Observe the result

MODULES:
FST
Build Cycle:
Cycle 1
Customer:
Issue Dependency:
Dev Commitment to Resolve in::

Description

1.Header for FTA note displays >

2.Safety Mechanism table alignment is not good.

3.Added Safety Mechanism is not listed in the table

Files

2022-04-12 Safety Mech.png (132 KB) 2022-04-12 Safety Mech.png Shankar Narayanan, 04/12/2022 05:57 PM
Actions
Copy link
 #1

Updated by Nikita Dhenge over 11 years ago

  • Status changed from Open to Closed

Verified in SP 11.2.0

Actions
Copy link
 #2

Updated by Shankar Narayanan about 3 years ago

  • Subject changed from Add Probability popup displays following error(Refer Description) to Fault Tree Analysis - Add Probability popup displays following error(Refer Description)
Actions
Copy link
 #3

Updated by User Admin about 3 years ago

  • Status changed from New to Open
Actions
Copy link

Also available in: Atom PDF