Project

General

Profile

Actions
Copy link

Bug #2157

closed

FormSheet for Incoming Inspection: Calculation was Wrong when the Tolerance was given as Minus Values in Control Plan Menu

Added by Anonymous almost 8 years ago. Updated almost 8 years ago.

Status:
Closed
Priority:
Medium
Assignee:
-
Start date:
07/03/2017
Due date:
% Done:

0%

Estimated time:
Steps To Reproduce:

1.Goto EwQIMS
2.Login as IC Module User
3.Navigate to IC Module
4.Goto Actions Tab and Click on Control Plan Menu
5.Enter the Minus Values in the Tolerance Field in the Characteristics Tables for the Selected Operations
6.Now Goto Inspection Template Menu and Map the PI and then Goto Receiving Material Menu and Create a Receving Material for that PI
7.Goto Receiving Inspection Menu and Click on the Inspection Entry for the Created PI
8.Give the Values in Mandatory Fields and Submit then the Inspection Form will be Opened
9.Now Enter the Values for the given Samples in the Variables Column
10.Observe the Result

Observation: By giving the Minus Values in the High/Low Tolerance Fields and Entering the Values then the Calculation was Showing Wrongly in Inspection Forms in the Inspection Entry/Receiving Inspection Menus

MODULES:
IC
Build Cycle:
Cycle 2
Customer:
Issue Dependency:
Dev Commitment to Resolve in::

Description

In Control Plan Menu, By giving the Minus Values in the High/Low Tolerance Fields and Entering the Values then the Calculation was Showing Wrongly in Inspection Forms in the Inspection Entry/Receiving Inspection Menus

EX: For Variables, Specification = 20, Low Tolerance Value = -1, High Tolerance Value = -2. So the Value Range should be between the 18 to 20 only. If more than 20 means its wrong

Files

Mis-Calculation in Form in IC on 03072017.png (123 KB) Mis-Calculation in Form in IC on 03072017.png Anonymous, 07/03/2017 04:56 PM
Actions
Copy link

Also available in: Atom PDF