Activity
From 08/29/2022 to 09/27/2022
09/19/2022
- 09:56 AM Bug #25326 (Closed): Getting error on filling Zone,Char designator, NCR No in variables section
- 09:56 AM Bug #25326 (Resolved): Getting error on filling Zone,Char designator, NCR No in variables section
- 09:56 AM Bug #25326 (Fixed in Dev): Getting error on filling Zone,Char designator, NCR No in variables section
- 09:55 AM Bug #25326 (Open): Getting error on filling Zone,Char designator, NCR No in variables section
- 09:55 AM Bug #25326 (Closed): Getting error on filling Zone,Char designator, NCR No in variables section
- Getting error on filling Zone,Char designator, NCR No in variables section
- 09:56 AM Bug #25325 (Closed): Inspected by field value shows some number
- 09:56 AM Bug #25325 (Resolved): Inspected by field value shows some number
- 09:56 AM Bug #25325 (Fixed in Dev): Inspected by field value shows some number
- 09:55 AM Bug #25325 (Open): Inspected by field value shows some number
- 09:54 AM Bug #25325 (Closed): Inspected by field value shows some number
- Inspected by field value shows some number
- 09:56 AM Bug #25324 (Closed): Need border near inspected by
- 09:56 AM Bug #25324 (Resolved): Need border near inspected by
- 09:56 AM Bug #25324 (Fixed in Dev): Need border near inspected by
- 09:55 AM Bug #25324 (Open): Need border near inspected by
- 09:54 AM Bug #25324 (Closed): Need border near inspected by
- Need border near inspected by
- 09:56 AM Bug #25323 (Closed): Can include char name column in new inspection sheet
- 09:56 AM Bug #25323 (Resolved): Can include char name column in new inspection sheet
- 09:56 AM Bug #25323 (Fixed in Dev): Can include char name column in new inspection sheet
- 09:55 AM Bug #25323 (Open): Can include char name column in new inspection sheet
- 09:53 AM Bug #25323 (Closed): Can include char name column in new inspection sheet
- Can include char name column in new inspection sheet
- 09:56 AM Bug #25322 (Closed): Variable char : Sample popup not opening
- 09:56 AM Bug #25322 (Resolved): Variable char : Sample popup not opening
- 09:56 AM Bug #25322 (Fixed in Dev): Variable char : Sample popup not opening
- 09:55 AM Bug #25322 (Open): Variable char : Sample popup not opening
- 09:53 AM Bug #25322 (Closed): Variable char : Sample popup not opening
- Variable char : Sample popup not opening
- 09:56 AM Bug #25321 (Closed): Attribute char : Gage/Method details not showing
- 09:56 AM Bug #25321 (Resolved): Attribute char : Gage/Method details not showing
- 09:56 AM Bug #25321 (Fixed in Dev): Attribute char : Gage/Method details not showing
- 09:55 AM Bug #25321 (Open): Attribute char : Gage/Method details not showing
- 09:53 AM Bug #25321 (Closed): Attribute char : Gage/Method details not showing
- Attribute char : Gage/Method details not showing
- 09:51 AM Bug #25320 (Closed): Inspection sheet : Need to enable Quality plan and FIR revision history
- 09:51 AM Bug #25320 (Resolved): Inspection sheet : Need to enable Quality plan and FIR revision history
- 09:51 AM Bug #25320 (Fixed in Dev): Inspection sheet : Need to enable Quality plan and FIR revision history
- 09:51 AM Bug #25320 (Open): Inspection sheet : Need to enable Quality plan and FIR revision history
- 09:50 AM Bug #25320 (Closed): Inspection sheet : Need to enable Quality plan and FIR revision history
- Inspection sheet : Need to enable Quality plan and FIR revision history
- 09:51 AM Bug #25319 (Closed): Integer field not taking alphanumeric value
- 09:51 AM Bug #25319 (Resolved): Integer field not taking alphanumeric value
- 09:51 AM Bug #25319 (Fixed in Dev): Integer field not taking alphanumeric value
- 09:51 AM Bug #25319 (Open): Integer field not taking alphanumeric value
- 09:49 AM Bug #25319 (Closed): Integer field not taking alphanumeric value
- Integer field not taking alphanumeric value
- 09:51 AM Bug #25318 (Closed): Final inspection sheet : Bottom section not working
- 09:51 AM Bug #25318 (Resolved): Final inspection sheet : Bottom section not working
- 09:51 AM Bug #25318 (Fixed in Dev): Final inspection sheet : Bottom section not working
- 09:51 AM Bug #25318 (Open): Final inspection sheet : Bottom section not working
- 09:48 AM Bug #25318 (Closed): Final inspection sheet : Bottom section not working
- Final inspection sheet : Bottom section not working
- 09:51 AM Bug #25317 (Closed): Conditional formatting not working in final inspection sheet
- 09:51 AM Bug #25317 (Resolved): Conditional formatting not working in final inspection sheet
- 09:51 AM Bug #25317 (Fixed in Dev): Conditional formatting not working in final inspection sheet
- 09:51 AM Bug #25317 (Open): Conditional formatting not working in final inspection sheet
- 09:48 AM Bug #25317 (Closed): Conditional formatting not working in final inspection sheet
- Conditional formatting not working in final inspection sheet
09/14/2022
- 04:12 PM Bug #25287 (Closed): Active column popup not opening
- 04:12 PM Bug #25287 (Resolved): Active column popup not opening
- 04:11 PM Bug #25287 (Fixed in Dev): Active column popup not opening
- 04:11 PM Bug #25287 (Open): Active column popup not opening
- 04:09 PM Bug #25287 (Closed): Active column popup not opening
- Active column popup not opening
- 04:12 PM Bug #25286 (Closed): Data type Datetime -> Date and time getting populated automatically
- 04:12 PM Bug #25286 (Resolved): Data type Datetime -> Date and time getting populated automatically
- 04:11 PM Bug #25286 (Fixed in Dev): Data type Datetime -> Date and time getting populated automatically
- 04:11 PM Bug #25286 (Open): Data type Datetime -> Date and time getting populated automatically
- 04:09 PM Bug #25286 (Closed): Data type Datetime -> Date and time getting populated automatically
- Data type Datetime -> Date and time getting populated automatically
- 04:12 PM Bug #25285 (Closed): Data type int not working
- 04:11 PM Bug #25285 (Resolved): Data type int not working
- 04:11 PM Bug #25285 (Fixed in Dev): Data type int not working
- 04:11 PM Bug #25285 (Open): Data type int not working
- 04:08 PM Bug #25285 (Closed): Data type int not working
- Data type int not working
- 04:12 PM Bug #25284 (Closed): Enable or disable active columns not working correctly
- 04:11 PM Bug #25284 (Resolved): Enable or disable active columns not working correctly
- 04:11 PM Bug #25284 (Fixed in Dev): Enable or disable active columns not working correctly
- 04:11 PM Bug #25284 (Open): Enable or disable active columns not working correctly
- 04:07 PM Bug #25284 (Closed): Enable or disable active columns not working correctly
- Enable or disable active columns not working correctly
- 04:12 PM Bug #25283 (Closed): No alert if mandatory fields are not filled in custom column creation pop-up
- 04:11 PM Bug #25283 (Resolved): No alert if mandatory fields are not filled in custom column creation pop-up
- 04:11 PM Bug #25283 (Fixed in Dev): No alert if mandatory fields are not filled in custom column creation pop-up
- 04:11 PM Bug #25283 (Open): No alert if mandatory fields are not filled in custom column creation pop-up
- 04:07 PM Bug #25283 (Closed): No alert if mandatory fields are not filled in custom column creation pop-up
- No alert if mandatory fields are not filled in custom column creation pop-up
- 04:12 PM Bug #25282 (Closed): Validation on Field Name for space
- 04:11 PM Bug #25282 (Resolved): Validation on Field Name for space
- 04:11 PM Bug #25282 (Fixed in Dev): Validation on Field Name for space
- 04:11 PM Bug #25282 (Open): Validation on Field Name for space
- 04:07 PM Bug #25282 (Closed): Validation on Field Name for space
- Validation on Field Name for space
- 04:12 PM Bug #25281 (Closed): Inprocess sheet not opening
- 04:11 PM Bug #25281 (Resolved): Inprocess sheet not opening
- 04:11 PM Bug #25281 (Fixed in Dev): Inprocess sheet not opening
- 04:11 PM Bug #25281 (Open): Inprocess sheet not opening
- 04:06 PM Bug #25281 (Closed): Inprocess sheet not opening
- Inprocess sheet not opening
- 03:35 PM Bug #25280 (Closed): Label issue Datatype in create column pop-up
- 03:35 PM Bug #25280 (Resolved): Label issue Datatype in create column pop-up
- 03:35 PM Bug #25280 (Fixed in Dev): Label issue Datatype in create column pop-up
- 03:34 PM Bug #25280 (Open): Label issue Datatype in create column pop-up
- 03:33 PM Bug #25280 (Closed): Label issue Datatype in create column pop-up
- Label issue Datatype in create column pop-up
- 03:35 PM Bug #25279 (Closed): Update operation for custom column not working
- 03:35 PM Bug #25279 (Resolved): Update operation for custom column not working
- 03:35 PM Bug #25279 (Fixed in Dev): Update operation for custom column not working
- 03:34 PM Bug #25279 (Open): Update operation for custom column not working
- 03:33 PM Bug #25279 (Closed): Update operation for custom column not working
- Update operation for custom column not working
- 03:35 PM Bug #25278 (Closed): After creating custom column need to click operation name to view the item
- 03:35 PM Bug #25278 (Resolved): After creating custom column need to click operation name to view the item
- 03:35 PM Bug #25278 (Fixed in Dev): After creating custom column need to click operation name to view the item
- 03:34 PM Bug #25278 (Open): After creating custom column need to click operation name to view the item
- 03:32 PM Bug #25278 (Closed): After creating custom column need to click operation name to view the item
- After creating custom column need to click operation name to view the item
- 03:35 PM Bug #25277 (Closed): Active columns not displaying in pop-up
- 03:35 PM Bug #25277 (Resolved): Active columns not displaying in pop-up
- 03:35 PM Bug #25277 (Fixed in Dev): Active columns not displaying in pop-up
- 03:34 PM Bug #25277 (Open): Active columns not displaying in pop-up
- 03:32 PM Bug #25277 (Closed): Active columns not displaying in pop-up
- Active columns not displaying in pop-up
- 03:35 PM Bug #25276 (Closed): Create column button duplication while performing refresh
- 03:35 PM Bug #25276 (Resolved): Create column button duplication while performing refresh
- 03:35 PM Bug #25276 (Fixed in Dev): Create column button duplication while performing refresh
- 03:34 PM Bug #25276 (Open): Create column button duplication while performing refresh
- 03:31 PM Bug #25276 (Closed): Create column button duplication while performing refresh
- Create column button duplication while performing refresh
09/02/2022
- 06:03 PM Bug #25260 (Closed): Inspection sheet design is not good which can be enhanced
- 06:02 PM Bug #25260 (Resolved): Inspection sheet design is not good which can be enhanced
- 06:02 PM Bug #25260 (Fixed in Dev): Inspection sheet design is not good which can be enhanced
- 06:02 PM Bug #25260 (Open): Inspection sheet design is not good which can be enhanced
- 06:01 PM Bug #25260 (Closed): Inspection sheet design is not good which can be enhanced
- Inspection sheet design is not good which can be enhanced
- 06:02 PM Bug #25259 (Closed): After sync , in sample entry pop-up unable to update the values correctly
- 06:02 PM Bug #25259 (Resolved): After sync , in sample entry pop-up unable to update the values correctly
- 06:02 PM Bug #25259 (Fixed in Dev): After sync , in sample entry pop-up unable to update the values correctly
- 06:02 PM Bug #25259 (Open): After sync , in sample entry pop-up unable to update the values correctly
- 06:00 PM Bug #25259 (Closed): After sync , in sample entry pop-up unable to update the values correctly
- After sync , in sample entry pop-up unable to update the values correctly
- 06:02 PM Bug #25258 (Closed): After sync , in web Inspected value not showing in Green/Red colour in Inspection sheet
- 06:02 PM Bug #25258 (Resolved): After sync , in web Inspected value not showing in Green/Red colour in Inspection sheet
- 06:02 PM Bug #25258 (Fixed in Dev): After sync , in web Inspected value not showing in Green/Red colour in Inspection sheet
- 06:02 PM Bug #25258 (Open): After sync , in web Inspected value not showing in Green/Red colour in Inspection sheet
- 06:00 PM Bug #25258 (Closed): After sync , in web Inspected value not showing in Green/Red colour in Inspection sheet
- After sync , in web Inspected value not showing in Green/Red colour in Inspection sheet
- 06:02 PM Bug #25257 (Closed): Schedules are not listing for users having only Receiving/Final Inspection Rights.Same is displayed for users having All Rights
- 06:02 PM Bug #25257 (Resolved): Schedules are not listing for users having only Receiving/Final Inspection Rights.Same is displayed for users having All Rights
- 06:02 PM Bug #25257 (Fixed in Dev): Schedules are not listing for users having only Receiving/Final Inspection Rights.Same is displayed for users having All Rights
- 06:02 PM Bug #25257 (Open): Schedules are not listing for users having only Receiving/Final Inspection Rights.Same is displayed for users having All Rights
- 06:00 PM Bug #25257 (Closed): Schedules are not listing for users having only Receiving/Final Inspection Rights.Same is displayed for users having All Rights
- Schedules are not listing for users having only Receiving/Final Inspection Rights.Same is displayed for users having ...
- 06:02 PM Bug #25256 (Closed): Option to accept/Reject and Submit from Tab
- 06:02 PM Bug #25256 (Resolved): Option to accept/Reject and Submit from Tab
- 06:02 PM Bug #25256 (Fixed in Dev): Option to accept/Reject and Submit from Tab
- 06:02 PM Bug #25256 (Open): Option to accept/Reject and Submit from Tab
- 05:59 PM Bug #25256 (Closed): Option to accept/Reject and Submit from Tab
- Option to accept/Reject and Submit from Tab
- 06:02 PM Bug #25255 (Closed): Auto save entered sample values, without clicking on save button
- 06:02 PM Bug #25255 (Resolved): Auto save entered sample values, without clicking on save button
- 06:02 PM Bug #25255 (Fixed in Dev): Auto save entered sample values, without clicking on save button
- 06:02 PM Bug #25255 (Open): Auto save entered sample values, without clicking on save button
- 05:58 PM Bug #25255 (Closed): Auto save entered sample values, without clicking on save button
- Auto save entered sample values, without clicking on save button
- 06:02 PM Bug #25254 (Closed): Time showing 00:00:00 by default.Need to increase size of these 2 fields
- 06:02 PM Bug #25254 (Resolved): Time showing 00:00:00 by default.Need to increase size of these 2 fields
- 06:02 PM Bug #25254 (Fixed in Dev): Time showing 00:00:00 by default.Need to increase size of these 2 fields
- 06:02 PM Bug #25254 (Open): Time showing 00:00:00 by default.Need to increase size of these 2 fields
- 05:58 PM Bug #25254 (Closed): Time showing 00:00:00 by default.Need to increase size of these 2 fields
- Time showing 00:00:00 by default.Need to increase size of these 2 fields
- 06:02 PM Bug #25253 (Closed): Design/Alignment issues in Header section and also need to use latest color pallet
- 06:02 PM Bug #25253 (Resolved): Design/Alignment issues in Header section and also need to use latest color pallet
- 06:02 PM Bug #25253 (Fixed in Dev): Design/Alignment issues in Header section and also need to use latest color pallet
- 06:02 PM Bug #25253 (Open): Design/Alignment issues in Header section and also need to use latest color pallet
- 05:57 PM Bug #25253 (Closed): Design/Alignment issues in Header section and also need to use latest color pallet
- Design/Alignment issues in Header section and also need to use latest color pallet
- 05:54 PM Bug #25252 (Closed): Alert if sample frequency is not selected
- 05:54 PM Bug #25252 (Resolved): Alert if sample frequency is not selected
- 05:54 PM Bug #25252 (Fixed in Dev): Alert if sample frequency is not selected
- 05:53 PM Bug #25252 (Open): Alert if sample frequency is not selected
- 05:53 PM Bug #25252 (Closed): Alert if sample frequency is not selected
- Alert if sample frequency is not selected
- 05:54 PM Bug #25251 (Closed): Replace Order number with Invoice Number (Label)
- 05:54 PM Bug #25251 (Resolved): Replace Order number with Invoice Number (Label)
- 05:54 PM Bug #25251 (Fixed in Dev): Replace Order number with Invoice Number (Label)
- 05:53 PM Bug #25251 (Open): Replace Order number with Invoice Number (Label)
- 05:52 PM Bug #25251 (Closed): Replace Order number with Invoice Number (Label)
- Replace Order number with Invoice Number (Label)
- 05:54 PM Bug #25250 (Closed): Replace Production date with Inspection date (Label)
- 05:54 PM Bug #25250 (Resolved): Replace Production date with Inspection date (Label)
- 05:54 PM Bug #25250 (Fixed in Dev): Replace Production date with Inspection date (Label)
- 05:53 PM Bug #25250 (Open): Replace Production date with Inspection date (Label)
- 05:52 PM Bug #25250 (Closed): Replace Production date with Inspection date (Label)
- Replace Production date with Inspection date (Label)
- 05:54 PM Bug #25249 (Closed): By-default show the last 7 days schedules,instead of selecting Start and End Date
- 05:54 PM Bug #25249 (Resolved): By-default show the last 7 days schedules,instead of selecting Start and End Date
- 05:54 PM Bug #25249 (Fixed in Dev): By-default show the last 7 days schedules,instead of selecting Start and End Date
- 05:53 PM Bug #25249 (Open): By-default show the last 7 days schedules,instead of selecting Start and End Date
- 05:51 PM Bug #25249 (Closed): By-default show the last 7 days schedules,instead of selecting Start and End Date
- By-default show the last 7 days schedules,instead of selecting Start and End Date
- 05:54 PM Bug #25248 (Closed): One time login for easy access - Remember me
- 05:54 PM Bug #25248 (Resolved): One time login for easy access - Remember me
- 05:54 PM Bug #25248 (Fixed in Dev): One time login for easy access - Remember me
- 05:53 PM Bug #25248 (Open): One time login for easy access - Remember me
- 05:51 PM Bug #25248 (Closed): One time login for easy access - Remember me
- One time login for easy access - Remember me
- 05:11 PM Bug #25247 (Closed): On clicking Next , screen should navigate to next Characteristic
- 05:11 PM Bug #25247 (Resolved): On clicking Next , screen should navigate to next Characteristic
- 05:10 PM Bug #25247 (Fixed in Dev): On clicking Next , screen should navigate to next Characteristic
- 05:10 PM Bug #25247 (Open): On clicking Next , screen should navigate to next Characteristic
- 05:10 PM Bug #25247 (Closed): On clicking Next , screen should navigate to next Characteristic
- On clicking Next , screen should navigate to next Characteristic
- 05:11 PM Bug #25246 (Closed): Bring default OK for Actual value for attribute characteristics
- 05:11 PM Bug #25246 (Resolved): Bring default OK for Actual value for attribute characteristics
- 05:10 PM Bug #25246 (Fixed in Dev): Bring default OK for Actual value for attribute characteristics
- 05:10 PM Bug #25246 (Open): Bring default OK for Actual value for attribute characteristics
- 05:09 PM Bug #25246 (Closed): Bring default OK for Actual value for attribute characteristics
- Bring default OK for Actual value for attribute characteristics
- 05:11 PM Bug #25245 (Closed): Bring filter to search all types of Inspection
- 05:11 PM Bug #25245 (Resolved): Bring filter to search all types of Inspection
- 05:10 PM Bug #25245 (Fixed in Dev): Bring filter to search all types of Inspection
- 05:10 PM Bug #25245 (Open): Bring filter to search all types of Inspection
- 05:09 PM Bug #25245 (Closed): Bring filter to search all types of Inspection
- Bring filter to search all types of Inspection
- 05:11 PM Bug #25244 (Closed): No of inspections implementations can be removed
- 05:11 PM Bug #25244 (Resolved): No of inspections implementations can be removed
- 05:10 PM Bug #25244 (Fixed in Dev): No of inspections implementations can be removed
- 05:10 PM Bug #25244 (Open): No of inspections implementations can be removed
- 05:08 PM Bug #25244 (Closed): No of inspections implementations can be removed
- No of inspections implementations can be removed
- 05:11 PM Bug #25243 (Closed): Attribute char : Default it will show All-OK,on updating the status to NOK and scrolling up,value changes to OK
- 05:11 PM Bug #25243 (Resolved): Attribute char : Default it will show All-OK,on updating the status to NOK and scrolling up,value changes to OK
- 05:10 PM Bug #25243 (Fixed in Dev): Attribute char : Default it will show All-OK,on updating the status to NOK and scrolling up,value changes to OK
- 05:10 PM Bug #25243 (Open): Attribute char : Default it will show All-OK,on updating the status to NOK and scrolling up,value changes to OK
- 05:08 PM Bug #25243 (Closed): Attribute char : Default it will show All-OK,on updating the status to NOK and scrolling up,value changes to OK
- Attribute char : Default it will show All-OK,on updating the status to NOK and scrolling up,value changes to OK
- 05:04 PM Bug #25242 (Closed): Sample value entry pop-up : On clicking save button,still status showing in progress only...Status should change to complete
- 05:04 PM Bug #25242 (Resolved): Sample value entry pop-up : On clicking save button,still status showing in progress only...Status should change to complete
- 05:04 PM Bug #25242 (Fixed in Dev): Sample value entry pop-up : On clicking save button,still status showing in progress only...Status should change to complete
- 05:03 PM Bug #25242 (Open): Sample value entry pop-up : On clicking save button,still status showing in progress only...Status should change to complete
- 05:03 PM Bug #25242 (Closed): Sample value entry pop-up : On clicking save button,still status showing in progress only...Status should change to complete
- Sample value entry pop-up : On clicking save button,still status showing in progress only...Status should change to c...
- 05:04 PM Bug #25241 (Closed): Make sample frequency mandatory for Inprocess Inspection only
- 05:04 PM Bug #25241 (Resolved): Make sample frequency mandatory for Inprocess Inspection only
- 05:04 PM Bug #25241 (Fixed in Dev): Make sample frequency mandatory for Inprocess Inspection only
- 05:03 PM Bug #25241 (Open): Make sample frequency mandatory for Inprocess Inspection only
- 05:02 PM Bug #25241 (Closed): Make sample frequency mandatory for Inprocess Inspection only
- Make sample frequency mandatory for Inprocess Inspection only
- 05:04 PM Bug #25240 (Closed): Set Choose Frequency as mandatory based on the Inspection Type
- 05:04 PM Bug #25240 (Resolved): Set Choose Frequency as mandatory based on the Inspection Type
- 05:04 PM Bug #25240 (Fixed in Dev): Set Choose Frequency as mandatory based on the Inspection Type
- 05:03 PM Bug #25240 (Open): Set Choose Frequency as mandatory based on the Inspection Type
- 05:02 PM Bug #25240 (Closed): Set Choose Frequency as mandatory based on the Inspection Type
- Set Choose Frequency as mandatory based on the Inspection Type
- 04:56 PM Bug #25239 (Closed): Set Shift as mandatory
- 04:56 PM Bug #25239 (Resolved): Set Shift as mandatory
- 04:56 PM Bug #25239 (Fixed in Dev): Set Shift as mandatory
- 04:55 PM Bug #25239 (Open): Set Shift as mandatory
- 04:55 PM Bug #25239 (Closed): Set Shift as mandatory
- Set Shift as mandatory
- 04:56 PM Bug #25238 (Closed): Total Inspections alignment can be improved
- 04:56 PM Bug #25238 (Resolved): Total Inspections alignment can be improved
- 04:56 PM Bug #25238 (Fixed in Dev): Total Inspections alignment can be improved
- 04:55 PM Bug #25238 (Open): Total Inspections alignment can be improved
- 04:54 PM Bug #25238 (Closed): Total Inspections alignment can be improved
- Total Inspections alignment can be improved
- 04:56 PM Bug #25237 (Closed): String changes of Order Number to Invoice No.
- 04:56 PM Bug #25237 (Resolved): String changes of Order Number to Invoice No.
- 04:56 PM Bug #25237 (Fixed in Dev): String changes of Order Number to Invoice No.
- 04:55 PM Bug #25237 (Open): String changes of Order Number to Invoice No.
- 04:53 PM Bug #25237 (Closed): String changes of Order Number to Invoice No.
- String changes of Order Number to Invoice No.
- 04:56 PM Bug #25236 (Closed): String changes of Production Date to Inspections Date
- 04:56 PM Bug #25236 (Resolved): String changes of Production Date to Inspections Date
- 04:56 PM Bug #25236 (Fixed in Dev): String changes of Production Date to Inspections Date
- 04:55 PM Bug #25236 (Open): String changes of Production Date to Inspections Date
- 04:53 PM Bug #25236 (Closed): String changes of Production Date to Inspections Date
- String changes of Production Date to Inspections Date
- 04:56 PM Bug #25235 (Closed): Back navigation from settings screen
- 04:56 PM Bug #25235 (Resolved): Back navigation from settings screen
- 04:56 PM Bug #25235 (Fixed in Dev): Back navigation from settings screen
- 04:55 PM Bug #25235 (Open): Back navigation from settings screen
- 04:52 PM Bug #25235 (Closed): Back navigation from settings screen
- Back navigation from settings screen
- 04:48 PM Bug #25234 (Closed): App color need to be changed as per standard
- 04:48 PM Bug #25234 (Resolved): App color need to be changed as per standard
- 04:47 PM Bug #25234 (Fixed in Dev): App color need to be changed as per standard
- 04:47 PM Bug #25234 (Open): App color need to be changed as per standard
- 04:47 PM Bug #25234 (Closed): App color need to be changed as per standard
- App color need to be changed as per standard
- 04:48 PM Bug #25233 (Closed): General information- Expand & Collapse
- 04:48 PM Bug #25233 (Resolved): General information- Expand & Collapse
- 04:47 PM Bug #25233 (Fixed in Dev): General information- Expand & Collapse
- 04:47 PM Bug #25233 (Open): General information- Expand & Collapse
- 04:46 PM Bug #25233 (Closed): General information- Expand & Collapse
- General information- Expand & Collapse
- 04:48 PM Bug #25232 (Closed): Aplha numeric Keypad settings of Actual value
- 04:48 PM Bug #25232 (Resolved): Aplha numeric Keypad settings of Actual value
- 04:47 PM Bug #25232 (Fixed in Dev): Aplha numeric Keypad settings of Actual value
- 04:47 PM Bug #25232 (Open): Aplha numeric Keypad settings of Actual value
- 04:45 PM Bug #25232 (Closed): Aplha numeric Keypad settings of Actual value
- Aplha numeric Keypad settings of Actual value
- 04:40 PM Bug #25231 (Closed): Set the Actual value's length based on highest value of Low,High and Specification
- 04:40 PM Bug #25231 (Resolved): Set the Actual value's length based on highest value of Low,High and Specification
- 04:40 PM Bug #25231 (Fixed in Dev): Set the Actual value's length based on highest value of Low,High and Specification
- 04:40 PM Bug #25231 (Open): Set the Actual value's length based on highest value of Low,High and Specification
- 04:38 PM Bug #25231 (Closed): Set the Actual value's length based on highest value of Low,High and Specification
- Set the Actual value's length based on highest value of Low,High and Specification
- 04:40 PM Bug #25230 (Closed): General information layout alignment
- 04:40 PM Bug #25230 (Resolved): General information layout alignment
- 04:40 PM Bug #25230 (Fixed in Dev): General information layout alignment
- 04:40 PM Bug #25230 (Open): General information layout alignment
- 04:38 PM Bug #25230 (Closed): General information layout alignment
- General information layout alignment
- 04:40 PM Bug #25229 (Closed): Date & Time icon visibility based on data
- 04:40 PM Bug #25229 (Resolved): Date & Time icon visibility based on data
- 04:40 PM Bug #25229 (Fixed in Dev): Date & Time icon visibility based on data
- 04:40 PM Bug #25229 (Open): Date & Time icon visibility based on data
- 04:37 PM Bug #25229 (Closed): Date & Time icon visibility based on data
- Date & Time icon visibility based on data
- 04:34 PM Bug #25228 (Closed): After decimal allowing to enter only 3 digits
- 04:34 PM Bug #25228 (Resolved): After decimal allowing to enter only 3 digits
- 04:34 PM Bug #25228 (Fixed in Dev): After decimal allowing to enter only 3 digits
- 04:34 PM Bug #25228 (Open): After decimal allowing to enter only 3 digits
- 04:33 PM Bug #25228 (Closed): After decimal allowing to enter only 3 digits
- After decimal allowing to enter only 3 digits
- 04:34 PM Bug #25227 (Closed): NG Qty should be replaced as Serial Number in inspection entry pop-up
- 04:34 PM Bug #25227 (Resolved): NG Qty should be replaced as Serial Number in inspection entry pop-up
- 04:34 PM Bug #25227 (Fixed in Dev): NG Qty should be replaced as Serial Number in inspection entry pop-up
- 04:34 PM Bug #25227 (Open): NG Qty should be replaced as Serial Number in inspection entry pop-up
- 04:33 PM Bug #25227 (Closed): NG Qty should be replaced as Serial Number in inspection entry pop-up
- NG Qty should be replaced as Serial Number in inspection entry pop-up
- 04:34 PM Bug #25226 (Closed): Attribute char even after giving OK showing as Out of spec if tolerance is not given as "OK"
- 04:34 PM Bug #25226 (Resolved): Attribute char even after giving OK showing as Out of spec if tolerance is not given as "OK"
- 04:34 PM Bug #25226 (Fixed in Dev): Attribute char even after giving OK showing as Out of spec if tolerance is not given as "OK"
- 04:34 PM Bug #25226 (Open): Attribute char even after giving OK showing as Out of spec if tolerance is not given as "OK"
- 04:32 PM Bug #25226 (Closed): Attribute char even after giving OK showing as Out of spec if tolerance is not given as "OK"
- Attribute char even after giving OK showing as Out of spec if tolerance is not given as "OK"
- 04:30 PM Bug #25225 (Closed): Remove Characteristics Name,Low value,Gages and Sample from Header section
- 04:30 PM Bug #25225 (Resolved): Remove Characteristics Name,Low value,Gages and Sample from Header section
- 04:30 PM Bug #25225 (Fixed in Dev): Remove Characteristics Name,Low value,Gages and Sample from Header section
- 04:30 PM Bug #25225 (Open): Remove Characteristics Name,Low value,Gages and Sample from Header section
- 04:29 PM Bug #25225 (Closed): Remove Characteristics Name,Low value,Gages and Sample from Header section
- Remove Characteristics Name,Low value,Gages and Sample from Header section
- 04:30 PM Bug #25224 (Closed): Inspection entry pop-up : Receipt No option should be used only for Receiving Inspection
- 04:30 PM Bug #25224 (Resolved): Inspection entry pop-up : Receipt No option should be used only for Receiving Inspection
- 04:30 PM Bug #25224 (Fixed in Dev): Inspection entry pop-up : Receipt No option should be used only for Receiving Inspection
- 04:30 PM Bug #25224 (Open): Inspection entry pop-up : Receipt No option should be used only for Receiving Inspection
- 04:28 PM Bug #25224 (Closed): Inspection entry pop-up : Receipt No option should be used only for Receiving Inspection
- Inspection entry pop-up : Receipt No option should be used only for Receiving Inspection
- 04:30 PM Bug #25223 (Closed): User login : Unable to login if space is there between words
- 04:30 PM Bug #25223 (Resolved): User login : Unable to login if space is there between words
- 04:30 PM Bug #25223 (Fixed in Dev): User login : Unable to login if space is there between words
- 04:30 PM Bug #25223 (Open): User login : Unable to login if space is there between words
- 04:28 PM Bug #25223 (Closed): User login : Unable to login if space is there between words
- User login : Unable to login if space is there between words
- 01:24 PM Bug #25220 (Closed): No border for few columns in inspection sheet
- 01:24 PM Bug #25220 (Resolved): No border for few columns in inspection sheet
- 01:19 PM Bug #25220 (Fixed in Dev): No border for few columns in inspection sheet
- 01:19 PM Bug #25220 (Open): No border for few columns in inspection sheet
- 01:18 PM Bug #25220 (Closed): No border for few columns in inspection sheet
- No border for few columns in inspection sheet
- 01:24 PM Bug #25219 (Closed): Allow to modify all the inspection : Update not working in IC settings
- 01:24 PM Bug #25219 (Resolved): Allow to modify all the inspection : Update not working in IC settings
- 01:19 PM Bug #25219 (Fixed in Dev): Allow to modify all the inspection : Update not working in IC settings
- 01:19 PM Bug #25219 (Open): Allow to modify all the inspection : Update not working in IC settings
- 01:18 PM Bug #25219 (Closed): Allow to modify all the inspection : Update not working in IC settings
- Allow to modify all the inspection : Update not working in IC settings
- 01:24 PM Bug #25218 (Closed): Entered Lot no not showing , but in other sheet its showing
- 01:24 PM Bug #25218 (Resolved): Entered Lot no not showing , but in other sheet its showing
- 01:19 PM Bug #25218 (Fixed in Dev): Entered Lot no not showing , but in other sheet its showing
- 01:19 PM Bug #25218 (Open): Entered Lot no not showing , but in other sheet its showing
- 01:17 PM Bug #25218 (Closed): Entered Lot no not showing , but in other sheet its showing
- Entered Lot no not showing , but in other sheet its showing
- 01:24 PM Bug #25217 (Closed): Not able to enter reference doc in Inspection sheet
- 01:24 PM Bug #25217 (Resolved): Not able to enter reference doc in Inspection sheet
- 01:19 PM Bug #25217 (Fixed in Dev): Not able to enter reference doc in Inspection sheet
- 01:19 PM Bug #25217 (Open): Not able to enter reference doc in Inspection sheet
- 01:17 PM Bug #25217 (Closed): Not able to enter reference doc in Inspection sheet
- Not able to enter reference doc in Inspection sheet
- 01:15 PM Bug #25216 (Closed): Context menu getting shrink towards right of the sheet
- 01:15 PM Bug #25216 (Resolved): Context menu getting shrink towards right of the sheet
- 01:14 PM Bug #25216 (Fixed in Dev): Context menu getting shrink towards right of the sheet
- 01:14 PM Bug #25216 (Open): Context menu getting shrink towards right of the sheet
- 01:14 PM Bug #25216 (Closed): Context menu getting shrink towards right of the sheet
- Context menu getting shrink towards right of the sheet
- 01:15 PM Bug #25215 (Closed): Bottom section : Values are showing after refreshing the sheet
- 01:15 PM Bug #25215 (Resolved): Bottom section : Values are showing after refreshing the sheet
- 01:14 PM Bug #25215 (Fixed in Dev): Bottom section : Values are showing after refreshing the sheet
- 01:14 PM Bug #25215 (Open): Bottom section : Values are showing after refreshing the sheet
- 01:13 PM Bug #25215 (Closed): Bottom section : Values are showing after refreshing the sheet
- Bottom section : Values are showing after refreshing the sheet
- 01:15 PM Bug #25214 (Closed): For variable all values shows in red colour
- 01:15 PM Bug #25214 (Resolved): For variable all values shows in red colour
- 01:14 PM Bug #25214 (Fixed in Dev): For variable all values shows in red colour
- 01:14 PM Bug #25214 (Open): For variable all values shows in red colour
- 01:13 PM Bug #25214 (Closed): For variable all values shows in red colour
- For variable all values shows in red colour
- 01:15 PM Bug #25213 (Closed): Sample 5 value not getting saved
- 01:15 PM Bug #25213 (Resolved): Sample 5 value not getting saved
- 01:14 PM Bug #25213 (Fixed in Dev): Sample 5 value not getting saved
- 01:14 PM Bug #25213 (Open): Sample 5 value not getting saved
- 01:12 PM Bug #25213 (Closed): Sample 5 value not getting saved
- Sample 5 value not getting saved
- 01:15 PM Bug #25212 (Closed): If we are entering comments,received qty, rework qty re-portable and sample column 3 value getting changed
- 01:15 PM Bug #25212 (Resolved): If we are entering comments,received qty, rework qty re-portable and sample column 3 value getting changed
- 01:14 PM Bug #25212 (Fixed in Dev): If we are entering comments,received qty, rework qty re-portable and sample column 3 value getting changed
- 01:14 PM Bug #25212 (Open): If we are entering comments,received qty, rework qty re-portable and sample column 3 value getting changed
- 01:05 PM Bug #25212 (Closed): If we are entering comments,received qty, rework qty re-portable and sample column 3 value getting changed
- If we are entering comments,received qty, rework qty re-portable and sample column 3 value getting changed
- 01:02 PM Bug #25211 (Closed): Allow to modify inspection not working based on business rule
- 01:02 PM Bug #25211 (Resolved): Allow to modify inspection not working based on business rule
- 01:02 PM Bug #25211 (Fixed in Dev): Allow to modify inspection not working based on business rule
- 01:01 PM Bug #25211 (Open): Allow to modify inspection not working based on business rule
- 01:00 PM Bug #25211 (Closed): Allow to modify inspection not working based on business rule
- Allow to modify inspection not working based on business rule
- 01:02 PM Bug #25210 (Closed): All columns should be center aligned
- 01:02 PM Bug #25210 (Resolved): All columns should be center aligned
- 01:02 PM Bug #25210 (Fixed in Dev): All columns should be center aligned
- 01:01 PM Bug #25210 (Open): All columns should be center aligned
- 12:59 PM Bug #25210 (Closed): All columns should be center aligned
- All columns should be center aligned
- 01:02 PM Bug #25209 (Closed): Conditional formatting not working
- 01:02 PM Bug #25209 (Resolved): Conditional formatting not working
- 01:02 PM Bug #25209 (Fixed in Dev): Conditional formatting not working
- 01:01 PM Bug #25209 (Open): Conditional formatting not working
- 12:57 PM Bug #25209 (Closed): Conditional formatting not working
- Conditional formatting not working
- 01:02 PM Bug #25208 (Closed): New Inspection sheet is not opening
- 01:02 PM Bug #25208 (Resolved): New Inspection sheet is not opening
- 01:02 PM Bug #25208 (Fixed in Dev): New Inspection sheet is not opening
- 01:01 PM Bug #25208 (Open): New Inspection sheet is not opening
- 12:57 PM Bug #25208 (Closed): New Inspection sheet is not opening
- New Inspection sheet is not opening
- 01:02 PM Bug #25207 (Closed): IC settings : Save not working for new business rule
- 01:02 PM Bug #25207 (Resolved): IC settings : Save not working for new business rule
- 01:02 PM Bug #25207 (Fixed in Dev): IC settings : Save not working for new business rule
- 01:01 PM Bug #25207 (Open): IC settings : Save not working for new business rule
- 12:56 PM Bug #25207 (Closed): IC settings : Save not working for new business rule
- IC settings : Save not working for new business rule
09/01/2022
- 08:56 PM Bug #25200 (Closed): Inheritance concept not working
- 08:55 PM Bug #25200 (Resolved): Inheritance concept not working
- 08:55 PM Bug #25200 (Fixed in Dev): Inheritance concept not working
- 08:55 PM Bug #25200 (Open): Inheritance concept not working
- 08:54 PM Bug #25200 (Closed): Inheritance concept not working
- Inheritance concept not working
- 08:56 PM Bug #25199 (Closed): Publish button clr not getting changed even after closing the popup
- 08:55 PM Bug #25199 (Resolved): Publish button clr not getting changed even after closing the popup
- 08:55 PM Bug #25199 (Fixed in Dev): Publish button clr not getting changed even after closing the popup
- 08:55 PM Bug #25199 (Open): Publish button clr not getting changed even after closing the popup
- 08:53 PM Bug #25199 (Closed): Publish button clr not getting changed even after closing the popup
- Publish button clr not getting changed even after closing the popup
- 08:56 PM Bug #25198 (Closed): Document number format can be improved
- 08:55 PM Bug #25198 (Resolved): Document number format can be improved
- 08:55 PM Bug #25198 (Fixed in Dev): Document number format can be improved
- 08:55 PM Bug #25198 (Open): Document number format can be improved
- 08:53 PM Bug #25198 (Closed): Document number format can be improved
- Document number format can be improved
- 08:56 PM Bug #25197 (Closed): After doing route publish , new characteristics are not showing in sheet even though approval is completed
- 08:55 PM Bug #25197 (Resolved): After doing route publish , new characteristics are not showing in sheet even though approval is completed
- 08:55 PM Bug #25197 (Fixed in Dev): After doing route publish , new characteristics are not showing in sheet even though approval is completed
- 08:55 PM Bug #25197 (Open): After doing route publish , new characteristics are not showing in sheet even though approval is completed
- 08:52 PM Bug #25197 (Closed): After doing route publish , new characteristics are not showing in sheet even though approval is completed
- After doing route publish , new characteristics are not showing in sheet even though approval is completed
- 08:50 PM Bug #25196 (Closed): Document revision number not getting updated : 1st publish shows 1 after second publish also shows 1
- 08:50 PM Bug #25196 (Resolved): Document revision number not getting updated : 1st publish shows 1 after second publish also shows 1
- 08:49 PM Bug #25196 (Fixed in Dev): Document revision number not getting updated : 1st publish shows 1 after second publish also shows 1
- 08:49 PM Bug #25196 (Open): Document revision number not getting updated : 1st publish shows 1 after second publish also shows 1
- 08:47 PM Bug #25196 (Closed): Document revision number not getting updated : 1st publish shows 1 after second publish also shows 1
- Document revision number not getting updated : 1st publish shows 1 after second publish also shows 1
- 08:50 PM Bug #25195 (Closed): Values are getting auto-filled in publish popup after publishing
- 08:50 PM Bug #25195 (Resolved): Values are getting auto-filled in publish popup after publishing
- 08:49 PM Bug #25195 (Fixed in Dev): Values are getting auto-filled in publish popup after publishing
- 08:49 PM Bug #25195 (Open): Values are getting auto-filled in publish popup after publishing
- 08:47 PM Bug #25195 (Closed): Values are getting auto-filled in publish popup after publishing
- Values are getting auto-filled in publish popup after publishing
- 08:50 PM Bug #25194 (Closed): Show publish button in popup green colour
- 08:50 PM Bug #25194 (Resolved): Show publish button in popup green colour
- 08:49 PM Bug #25194 (Fixed in Dev): Show publish button in popup green colour
- 08:49 PM Bug #25194 (Open): Show publish button in popup green colour
- 08:45 PM Bug #25194 (Closed): Show publish button in popup green colour
- Show publish button in popup green colour
- 08:50 PM Bug #25193 (Closed): Level name should be read only
- 08:50 PM Bug #25193 (Resolved): Level name should be read only
- 08:49 PM Bug #25193 (Fixed in Dev): Level name should be read only
- 08:49 PM Bug #25193 (Open): Level name should be read only
- 08:45 PM Bug #25193 (Closed): Level name should be read only
- Level name should be read only
- 08:50 PM Bug #25192 (Closed): Publish tool tip shows select document which can be renamed
- 08:50 PM Bug #25192 (Resolved): Publish tool tip shows select document which can be renamed
- 08:49 PM Bug #25192 (Fixed in Dev): Publish tool tip shows select document which can be renamed
- 08:49 PM Bug #25192 (Open): Publish tool tip shows select document which can be renamed
- 08:42 PM Bug #25192 (Closed): Publish tool tip shows select document which can be renamed
- Publish tool tip shows select document which can be renamed
- 08:50 PM Bug #25191 (Closed): Gage select pop-up : Show OK button with icon (Button+Icon)
- 08:50 PM Bug #25191 (Resolved): Gage select pop-up : Show OK button with icon (Button+Icon)
- 08:49 PM Bug #25191 (Fixed in Dev): Gage select pop-up : Show OK button with icon (Button+Icon)
- 08:49 PM Bug #25191 (Open): Gage select pop-up : Show OK button with icon (Button+Icon)
- 08:42 PM Bug #25191 (Closed): Gage select pop-up : Show OK button with icon (Button+Icon)
- Gage select pop-up : Show OK button with icon (Button+Icon)
- 08:40 PM Bug #25190 (Closed): Gage pop-up: Search Not working
- 08:39 PM Bug #25190 (Resolved): Gage pop-up: Search Not working
- 08:38 PM Bug #25190 (Fixed in Dev): Gage pop-up: Search Not working
- 08:38 PM Bug #25190 (Open): Gage pop-up: Search Not working
- 08:18 PM Bug #25190 (Closed): Gage pop-up: Search Not working
- Gage pop-up: Search Not working
- 08:40 PM Bug #25189 (Closed): Published doc not showing in TOC
- 08:39 PM Bug #25189 (Resolved): Published doc not showing in TOC
- 08:38 PM Bug #25189 (Fixed in Dev): Published doc not showing in TOC
- 08:38 PM Bug #25189 (Open): Published doc not showing in TOC
- 08:15 PM Bug #25189 (Closed): Published doc not showing in TOC
- Published doc not showing in TOC
- 08:40 PM Bug #25188 (Closed): If inspection parameter is not published first time, restrict opening of inspection sheet
- 08:39 PM Bug #25188 (Resolved): If inspection parameter is not published first time, restrict opening of inspection sheet
- 08:38 PM Bug #25188 (Fixed in Dev): If inspection parameter is not published first time, restrict opening of inspection sheet
- 08:38 PM Bug #25188 (Open): If inspection parameter is not published first time, restrict opening of inspection sheet
- 08:15 PM Bug #25188 (Closed): If inspection parameter is not published first time, restrict opening of inspection sheet
- If inspection parameter is not published first time, restrict opening of inspection sheet
- 08:40 PM Bug #25187 (Closed): Saved successfully alert should be replaced with published successfully
- 08:39 PM Bug #25187 (Resolved): Saved successfully alert should be replaced with published successfully
- 08:38 PM Bug #25187 (Fixed in Dev): Saved successfully alert should be replaced with published successfully
- 08:38 PM Bug #25187 (Open): Saved successfully alert should be replaced with published successfully
- 08:14 PM Bug #25187 (Closed): Saved successfully alert should be replaced with published successfully
- Saved successfully alert should be replaced with published successfully
- 08:40 PM Bug #25186 (Closed): Need to highlight the publish button with some text
- 08:39 PM Bug #25186 (Resolved): Need to highlight the publish button with some text
- 08:38 PM Bug #25186 (Fixed in Dev): Need to highlight the publish button with some text
- 08:38 PM Bug #25186 (Open): Need to highlight the publish button with some text
- 08:11 PM Bug #25186 (Closed): Need to highlight the publish button with some text
- Need to highlight the publish button with some text
- 08:40 PM Bug #25185 (Closed): Bring business rule for publish
- 08:39 PM Bug #25185 (Resolved): Bring business rule for publish
- 08:38 PM Bug #25185 (Fixed in Dev): Bring business rule for publish
- 08:38 PM Bug #25185 (Open): Bring business rule for publish
- 07:16 PM Bug #25185 (Closed): Bring business rule for publish
- Bring business rule for publish
- 11:48 AM Bug #25179 (Closed): Receiving Inspection scheduling pop-up : Select name different which needs to be renamed
- 11:48 AM Bug #25179 (Resolved): Receiving Inspection scheduling pop-up : Select name different which needs to be renamed
- 11:47 AM Bug #25179 (Fixed in Dev): Receiving Inspection scheduling pop-up : Select name different which needs to be renamed
- 11:47 AM Bug #25179 (Open): Receiving Inspection scheduling pop-up : Select name different which needs to be renamed
- 11:46 AM Bug #25179 (Closed): Receiving Inspection scheduling pop-up : Select name different which needs to be renamed
- Receiving Inspection scheduling pop-up : Select name different which needs to be renamed
- 11:48 AM Bug #25178 (Closed): Inspection parameters : Characteristics not getting saved
- 11:48 AM Bug #25178 (Resolved): Inspection parameters : Characteristics not getting saved
- 11:47 AM Bug #25178 (Fixed in Dev): Inspection parameters : Characteristics not getting saved
- 11:47 AM Bug #25178 (Open): Inspection parameters : Characteristics not getting saved
- 11:45 AM Bug #25178 (Closed): Inspection parameters : Characteristics not getting saved
- Inspection parameters : Characteristics not getting saved
- 11:48 AM Bug #25177 (Closed): After performing edit operation , saved values getting removed from drop down in Inspection parameters
- 11:48 AM Bug #25177 (Resolved): After performing edit operation , saved values getting removed from drop down in Inspection parameters
- 11:47 AM Bug #25177 (Fixed in Dev): After performing edit operation , saved values getting removed from drop down in Inspection parameters
- 11:47 AM Bug #25177 (Open): After performing edit operation , saved values getting removed from drop down in Inspection parameters
- 11:45 AM Bug #25177 (Closed): After performing edit operation , saved values getting removed from drop down in Inspection parameters
- After performing edit operation , saved values getting removed from drop down in Inspection parameters
- 11:48 AM Bug #25176 (Closed): Bring validation for C-0 Sampling plan
- 11:48 AM Bug #25176 (Resolved): Bring validation for C-0 Sampling plan
- 11:47 AM Bug #25176 (Fixed in Dev): Bring validation for C-0 Sampling plan
- 11:47 AM Bug #25176 (Open): Bring validation for C-0 Sampling plan
- 11:44 AM Bug #25176 (Closed): Bring validation for C-0 Sampling plan
- Bring validation for C-0 Sampling plan
- 11:48 AM Bug #25175 (Closed): After performing edit operation , saved values getting removed from drop down in Receiving Inspection scheduling
- 11:48 AM Bug #25175 (Resolved): After performing edit operation , saved values getting removed from drop down in Receiving Inspection scheduling
- 11:47 AM Bug #25175 (Fixed in Dev): After performing edit operation , saved values getting removed from drop down in Receiving Inspection scheduling
- 11:47 AM Bug #25175 (Open): After performing edit operation , saved values getting removed from drop down in Receiving Inspection scheduling
- 11:43 AM Bug #25175 (Closed): After performing edit operation , saved values getting removed from drop down in Receiving Inspection scheduling
- After performing edit operation , saved values getting removed from drop down in Receiving Inspection scheduling
- 11:48 AM Bug #25174 (Closed): Receiving Inspection scheduling : Search filter not working for PI
- 11:48 AM Bug #25174 (Resolved): Receiving Inspection scheduling : Search filter not working for PI
- 11:47 AM Bug #25174 (Fixed in Dev): Receiving Inspection scheduling : Search filter not working for PI
- 11:47 AM Bug #25174 (Open): Receiving Inspection scheduling : Search filter not working for PI
- 11:43 AM Bug #25174 (Closed): Receiving Inspection scheduling : Search filter not working for PI
- Receiving Inspection scheduling : Search filter not working for PI
- 11:48 AM Bug #25173 (Closed): Receiving Inspection scheduling : Need search filter for Supplier and PI
- 11:48 AM Bug #25173 (Resolved): Receiving Inspection scheduling : Need search filter for Supplier and PI
- 11:47 AM Bug #25173 (Fixed in Dev): Receiving Inspection scheduling : Need search filter for Supplier and PI
- 11:47 AM Bug #25173 (Open): Receiving Inspection scheduling : Need search filter for Supplier and PI
- 11:42 AM Bug #25173 (Closed): Receiving Inspection scheduling : Need search filter for Supplier and PI
- Receiving Inspection scheduling : Need search filter for Supplier and PI
- 11:48 AM Bug #25172 (Closed): Acceptance Quality limit : Remove attribute and variable options from the drop down list
- 11:48 AM Bug #25172 (Resolved): Acceptance Quality limit : Remove attribute and variable options from the drop down list
- 11:47 AM Bug #25172 (Fixed in Dev): Acceptance Quality limit : Remove attribute and variable options from the drop down list
- 11:47 AM Bug #25172 (Open): Acceptance Quality limit : Remove attribute and variable options from the drop down list
- 11:41 AM Bug #25172 (Closed): Acceptance Quality limit : Remove attribute and variable options from the drop down list
- Acceptance Quality limit : Remove attribute and variable options from the drop down list
- 11:34 AM Bug #25171 (Closed): Inspection parameter : Increase frequency column width
- 11:33 AM Bug #25171 (Resolved): Inspection parameter : Increase frequency column width
- 11:33 AM Bug #25171 (Fixed in Dev): Inspection parameter : Increase frequency column width
- 11:32 AM Bug #25171 (Open): Inspection parameter : Increase frequency column width
- 11:31 AM Bug #25171 (Closed): Inspection parameter : Increase frequency column width
- Inspection parameter : Increase frequency column width
- 11:34 AM Bug #25170 (Closed): Inspection parameter : Remove AQL field from characteristic grid
- 11:33 AM Bug #25170 (Resolved): Inspection parameter : Remove AQL field from characteristic grid
- 11:33 AM Bug #25170 (Fixed in Dev): Inspection parameter : Remove AQL field from characteristic grid
- 11:32 AM Bug #25170 (Open): Inspection parameter : Remove AQL field from characteristic grid
- 11:31 AM Bug #25170 (Closed): Inspection parameter : Remove AQL field from characteristic grid
- Inspection parameter : Remove AQL field from characteristic grid
- 11:34 AM Bug #25169 (Closed): Acceptance Quality limit: Search function not working for C=0
- 11:33 AM Bug #25169 (Resolved): Acceptance Quality limit: Search function not working for C=0
- 11:33 AM Bug #25169 (Fixed in Dev): Acceptance Quality limit: Search function not working for C=0
- 11:32 AM Bug #25169 (Open): Acceptance Quality limit: Search function not working for C=0
- 11:30 AM Bug #25169 (Closed): Acceptance Quality limit: Search function not working for C=0
- Acceptance Quality limit: Search function not working for C=0
- 11:34 AM Bug #25168 (Closed): Acceptance Quality limit : For attribute and variable not able to enter data
- 11:33 AM Bug #25168 (Resolved): Acceptance Quality limit : For attribute and variable not able to enter data
- 11:33 AM Bug #25168 (Fixed in Dev): Acceptance Quality limit : For attribute and variable not able to enter data
- 11:32 AM Bug #25168 (Open): Acceptance Quality limit : For attribute and variable not able to enter data
- 11:30 AM Bug #25168 (Closed): Acceptance Quality limit : For attribute and variable not able to enter data
- Acceptance Quality limit : For attribute and variable not able to enter data
- 11:34 AM Bug #25167 (Closed): Acceptance Quality limit : By default show all the values in C=0
- 11:29 AM Bug #25167 (Resolved): Acceptance Quality limit : By default show all the values in C=0
- 11:29 AM Bug #25167 (Fixed in Dev): Acceptance Quality limit : By default show all the values in C=0
- 11:29 AM Bug #25167 (Open): Acceptance Quality limit : By default show all the values in C=0
- 11:28 AM Bug #25167 (Closed): Acceptance Quality limit : By default show all the values in C=0
- Acceptance Quality limit : By default show all the values in C=0
Also available in: Atom