Activity
From 09/23/2019 to 10/22/2019
10/22/2019
- 07:27 PM Bug #14047 (Resolved): Equipment Part Linkage: Not able to map the parts for the selected assembly line.
- 07:12 PM Bug #14505 (Resolved): Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field, the system redirecting to the Manufacturing line and also the name of the top two fields displays as "Category"
- Issue#1 not able to replicate
Issue#2 - Not an issue. it will refresh the whole page to load activity. - 07:05 PM Bug #14505 (Open): Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field, the system redirecting to the Manufacturing line and also the name of the top two fields displays as "Category"
- 07:08 PM Bug #14503 (Resolved): Plant Configuration:Category--> Utility Equipment type: Need upload option in utility Equipment creation screen
- 07:05 PM Bug #14503 (Open): Plant Configuration:Category--> Utility Equipment type: Need upload option in utility Equipment creation screen
- 07:06 PM Bug #14283 (Open): Equipment: Asset Number--> When entering more than 10 characters and saving the details, the system getting hanged and also alert message is not displayed
- 07:05 PM Bug #14295 (Open): Equipment: Asset Number field--> It should not accept the same asset number for different equipment
- 06:53 PM Bug #14349 (Resolved): Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert message is not displayed and also not redirecting to the die master screen
- 06:34 PM Unit Level and Cosmetic Issues #14304 (Resolved): Die: When entering the value as "0000" or 0000000"11111111", Need validation for Life Cycle Count as *"The value you entered is not valid"*
- validation given "0000".
"111" its user value which cannot be validate. - 05:29 PM Bug #14347 (Resolved): Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the classification of the die
- 05:19 PM Bug #14372 (Resolved): Business Rule: Target Value settings--> Target value may be 35.6, here not able to enter the value in the field
- 03:16 PM Bug #14489 (Not Resolved): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- Check with Bijoy for UI improvement
- 11:01 AM Bug #14489 (Resolved): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- 03:00 PM Unit Level and Cosmetic Issues #14303 (Resolved): Die: Need to change the "Please enter cycle time" alert message as "Please enter the Die Life cycle count"
- 01:34 PM Bug #14378 (Resolved): Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- 01:34 PM Unit Level and Cosmetic Issues #14377 (Resolved): Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- 11:02 AM Bug #14205 (Resolved): Assign audit form and type data is shared between auditpro and supplier management
- 11:02 AM Bug #14485 (Resolved): Supplier MGT:Adding supplier type in supplier type master not refelcted in part type master dropdown
- 11:02 AM Bug #14486 (Resolved): Supplier MGMT:By default Plant name should display as Corporate in new risk level creation screen in risk master
- 11:02 AM Bug #14487 (Resolved): Supplier MGMT:Improper validation alert if not selecting plant name."Enter or select plant name" should display instead it is displaying "Enter level value" though it has specified
- 11:01 AM Bug #14488 (Resolved): Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- 11:01 AM Bug #14490 (Resolved): Supplier MGMT:If "Is a site? yes" then unable to save new entity under corporate
10/21/2019
- 12:41 PM Bug #14505 (Closed): Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field, the system redirecting to the Manufacturing line and also the name of the top two fields displays as "Category"
- Issue 1: Plant Configuration: Category--> Equipment--> When selecting the Assembly Line on Category drop down field,...
- 12:21 PM Bug #14165 (Not Fixed with Hotfix): FSR - After allocating Function and Requirement in TSR for the child element and then opening FSR of child(Allocated) elements, system is displaying 'Technical Safety Concepts' as the Header
- 12:12 PM Bug #14503 (Closed): Plant Configuration:Category--> Utility Equipment type: Need upload option in utility Equipment creation screen
- Plant Configuration:Category--> Utility Equipment type: Need upload option in utility Equipment creation screen
10/19/2019
10/18/2019
- 04:10 PM Bug #14490 (Open): Supplier MGMT:If "Is a site? yes" then unable to save new entity under corporate
- 04:07 PM Bug #14490 (Fixed with Hotfix): Supplier MGMT:If "Is a site? yes" then unable to save new entity under corporate
- Supplier MGMT:If "Is a site? yes" then unable to save new entity under corporate
- 04:10 PM Bug #14489 (Open): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- 04:05 PM Bug #14489 (Fixed with Hotfix): Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Improvement needed
- Supplier MGMT:UI issue->If more part type for one supplier type then listing is not good as like in screen shot.Impro...
- 04:10 PM Bug #14488 (Open): Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- 04:04 PM Bug #14488 (Fixed with Hotfix): Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- Supplier MGMT:Duplicate risk level value and its descriptions are accepting
- 04:10 PM Bug #14487 (Open): Supplier MGMT:Improper validation alert if not selecting plant name."Enter or select plant name" should display instead it is displaying "Enter level value" though it has specified
- 04:03 PM Bug #14487 (Fixed with Hotfix): Supplier MGMT:Improper validation alert if not selecting plant name."Enter or select plant name" should display instead it is displaying "Enter level value" though it has specified
- Supplier MGMT:Improper validation alert if not selecting plant name."Enter or select plant name" should display inste...
- 04:10 PM Bug #14486 (Open): Supplier MGMT:By default Plant name should display as Corporate in new risk level creation screen in risk master
- 04:01 PM Bug #14486 (Fixed with Hotfix): Supplier MGMT:By default Plant name should display as Corporate in new risk level creation screen in risk master
- Supplier MGMT:By default Plant name should display as Corporate in new risk level creation screen in risk master
- 04:10 PM Bug #14485 (Open): Supplier MGT:Adding supplier type in supplier type master not refelcted in part type master dropdown
- 04:01 PM Bug #14485 (Fixed with Hotfix): Supplier MGT:Adding supplier type in supplier type master not refelcted in part type master dropdown
- Supplier MGT:Adding supplier type in supplier type master not refelcted in part type master dropdown
- 03:03 PM Bug #14045 (Resolved): Trade --> When clicking on Trade menu, it displays blank screen with loading comment. Due to this issue not able to create the spare part master. (So imported the spare part and proceeded further)
- 03:02 PM Bug #14043 (Resolved): Die --> No need separate label for Imported Manufacturer checkbox. While placing the cursor in checkbox, the system should display the tooltip as Imported Manufacturer
- 02:59 PM Unit Level and Cosmetic Issues #14042 (Resolved): Die --> Imported Manufacture label should be renamed to Imported Manufacturer
- 02:58 PM Bug #14026 (Closed): Reports ->"NC Closure" - Report -> "Total closure count" and "Count of Open" and "Count of Closed" is not displayed the exact count
- Issue Verified in Sp_915 CY-2
- 02:34 PM Bug #14478 (Open): Icon missing in LPA reports for "Audit finding classification" and "LPA finding classification"
- Icon missing in LPA reports for "Audit finding classification" and "LPA finding classification"
- 02:31 PM Bug #14023 (Closed): Reports -> Repeat Non Conformance Report -> Label Changes in Report
- Issue verified in SP_915 Cy-2
- 12:14 PM Bug #14107 (Closed): While doing flow down from Failure tree the system throws Timeout Error
- 10:40 AM Bug #14107 (Resolved): While doing flow down from Failure tree the system throws Timeout Error
- 12:13 PM Bug #14128 (Closed): While clicking on requirement tree is not opened.
- 10:40 AM Bug #14128 (Resolved): While clicking on requirement tree is not opened.
- 10:43 AM Bug #14144 (Resolved): P-Diagram: Cannot give select option in control factors branch at control factor table
- 10:40 AM Bug #14165 (Resolved): FSR - After allocating Function and Requirement in TSR for the child element and then opening FSR of child(Allocated) elements, system is displaying 'Technical Safety Concepts' as the Header
10/17/2019
- 06:27 PM Unit Level and Cosmetic Issues #14462 (Closed): Equipment: When tries to edit the same equipment name, it displays alert like "Similar name exists do you want to continue?"if clicking on Ok button, the page should get refresh automatically
- Equipment: When tries to edit the same equipment name, it displays alert like "Similar name exists do you want to con...
- 01:48 PM Bug #13907 (Not Resolved): Removing checkpoint before submitting to auditee does not updating score status properly after corrective action close out
- Still after removing any checklists before submit to audit using edit audit record score and its status not updated a...
- 01:25 PM Bug #13807 (Closed): No view checklists details if audit status is "No NC"
- Working fine
- 01:15 PM Bug #13925 (Not Resolved): 404 File or directory not found occurred if checklists has not filled and directly submitted to auditee with "No NC" audit status
- Same 404 error error occurred if checklists has not filled and directly submitted to auditee with "No NC" audit statu...
- 01:01 PM Bug #13810 (Closed): VEM->CAR->Unable to do submit to auditee.(clicking publish no published message)
- working fine
- 01:00 PM Bug #13802 (Closed): Scheduled audit icon should remove from Suite supplier landing page.
- no schecduled audit icon in suite supplier page as expected.hence closing this defect
- 12:59 PM Bug #13801 (Closed): Primary supplier contact->Position shows 0 by default in supplier portal for supplier primary contact.This is properly shows as "User" in suite page(supplier)
- Working fine
- 12:59 PM Bug #13809 (Not Resolved): No segment 1&2,3,4 audit program by default in supplier portal.Audit program,audit type's of audit pro module should not be listing in supplier portal menu(audit program/audit type)
- Still audit program listing is not respect to supplier portal.able to see all audit program from auditpro module
- 12:57 PM Bug #13811 (Closed): Supplier import ->While importing Supplier name alone is getting imported but mapped parts from import file is not imported
- working fine.able to import supplier with parts
- 12:53 PM Bug #13951 (Closed): VEM->Perform audit screen->View previous car->On clicking show audit or Show Car's button server error is showing
- As discussed, View previous car button has removed from supplier management as there is no need of this option.hence ...
- 12:27 PM Bug #13952 (Closed): VEM->No need to show view checklists details section while submit to auditee (publish report)
- working fine
- 12:16 PM Bug #13963 (Closed): VAM perform audit->NC/OFI category displays twice(Duplicate value for NC and OFI category).Please refer screen shot
- 12:16 PM Bug #14205 (Open): Assign audit form and type data is shared between auditpro and supplier management
- 10:56 AM Bug #13895 (Closed): Reports Deployment -> Getting error message while executing a job after deploying AP report
10/16/2019
- 05:44 PM Bug #14164 (Closed): FSR - While opening FSR document for Few PI(Front Impact Airbag System/Airbag), System opens Visual Studio alert. When selecting it, Session is terminated.
- 05:43 PM Bug #13961 (Not Fixed with Hotfix): Duplicate NC is displayed in NC Details Page.
- 05:40 PM Bug #14132 (Closed): Failure Tree: Same child element is displayed for different parent in Failure tree
- 05:38 PM Bug #14135 (Closed): EFC Tree: While opening EFC tree it contains large space at bottom of the page
- 05:37 PM Bug #14136 (Closed): While clicking OK button from EFC tree flow down indicator the page got hanged
- 05:37 PM Bug #14138 (Closed): EFC Tree: When selecting EFC tree diagram the parent PI itself displaying as child for the same Element
- 05:36 PM Bug #14174 (Closed): Requirement Tree: Same child element is displayed for different parent in Requirement tree
- 05:15 PM Bug #14299 (Open): Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected
- 05:15 PM Unit Level and Cosmetic Issues #14303 (Open): Die: Need to change the "Please enter cycle time" alert message as "Please enter the Die Life cycle count"
- 05:15 PM Unit Level and Cosmetic Issues #14304 (Open): Die: When entering the value as "0000" or 0000000"11111111", Need validation for Life Cycle Count as *"The value you entered is not valid"*
- 05:15 PM Bug #14344 (Open): Production OEE(Die Life Cycle): When the actual quantity(1065) exceeded from the life cycle count(1000), the part details is not showing in the screen
- 05:14 PM Bug #14347 (Open): Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the classification of the die
- 05:14 PM Bug #14349 (Open): Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert message is not displayed and also not redirecting to the die master screen
- 05:13 PM Bug #14358 (Open): Equipment Part-Die Linkage: The system should not allow user to map the Expired die for the selected Equipment-Part linkage
- 05:12 PM Bug #13962 (Not Fixed with Hotfix): Template 1 & Template 2 some of fields are not matching after publishing
- Still the issue occur. Some fields are displayed after publish
- 05:11 PM Bug #13962 (Fixed with Hotfix): Template 1 & Template 2 some of fields are not matching after publishing
- 05:10 PM Bug #13962 (Open): Template 1 & Template 2 some of fields are not matching after publishing
- 02:56 PM Bug #13962 (Closed): Template 1 & Template 2 some of fields are not matching after publishing
- Name are displayed. closing this issue cycle in 1 915
- 05:12 PM Bug #14372 (Open): Business Rule: Target Value settings--> Target value may be 35.6, here not able to enter the value in the field
- 10:54 AM Bug #14372 (Not Fixed with Hotfix): Business Rule: Target Value settings--> Target value may be 35.6, here not able to enter the value in the field
- Business Rule: Target Value settings--> The system should not allow user to enter any special characters other than "...
- 05:12 PM Bug #14374 (Open): Business Rule: Target Value settings--> Unit of measurement field is missing
- 11:08 AM Bug #14374 (Closed): Business Rule: Target Value settings--> Unit of measurement field is missing
- Business Rule: Target Value settings--> Unit of measurement field is missing
- 05:12 PM Bug #14375 (Open): Business Rule--> Target value-->Need to capture Overall target value for the individual report
- 11:17 AM Bug #14375 (Closed): Business Rule--> Target value-->Need to capture Overall target value for the individual report
- 1. Maintenance Cost: Need separate Field to capture target value of Maintenance cost report to analysis the total tar...
- 05:11 PM Unit Level and Cosmetic Issues #14377 (Open): Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- 11:51 AM Unit Level and Cosmetic Issues #14377 (Closed): Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- Equipment: Need Icon for Non Manufacturing Line and Utility Equipment context menu
- 05:11 PM Bug #14378 (Open): Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- 12:02 PM Bug #14378 (Closed): Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- Equipment: Created Non Manufacturing Line and Utility Equipment is not showing in the Equipment tree structure
- 05:11 PM Bug #14386 (Open): Business Rule: Reminder setting tab--> The system should not display the duration value "Zero" as default
- 12:57 PM Bug #14386 (Closed): Business Rule: Reminder setting tab--> The system should not display the duration value "Zero" as default
- Issue 1: Business Rule: Reminder setting tab--> The system should not display the duration value "Zero" as default
... - 05:10 PM Bug #14194 (Closed): Severity - Assigned Severity value is not updated in any of the Documents/Pages.
- 05:07 PM Bug #14115 (Not Resolved): Design VDA - Structure Analysis - System allows to Copy an element and Drop on another element in the Same Level. Following Issues occurs while doing the above operation.
- 04:48 PM Bug #14113 (Closed): Design VDA - Structure Analysis - While Drag and Drop any element and clicking Cancel icon, system automatically Moves the element on the Dropped element
- Closed in SP915 Cycle 2
- 04:39 PM Bug #14105 (Not Resolved): Design VDA - Structure Analysis - By Default system displays wrong count in 'From Component Level'
- 04:34 PM Bug #14102 (Not Resolved): Design VDA - Structure Analysis - Level marker remains same for all the Levels even after Expand/Collapse is done. (Refer Description)
- 04:26 PM Bug #14116 (Closed): Design VDA - Failure Analysis - For a Failure Flowdown without Requirement system displays Parent Element in the same level of Child element
- Closed in SP915 Cycle 2
- 03:50 PM Bug #14170 (Closed): Design and Process VDA - Step 7 is displayed for Percentage allocations
- Closed in SP915 Cycle 2
- 03:10 PM Bug #14017 (Not Fixed with Hotfix): Perform Audit-> Primary & secondary contact person only need to display in Auditee field in cummins report . Current its display the global process owner.
- 03:10 PM Bug #14017: Perform Audit-> Primary & secondary contact person only need to display in Auditee field in cummins report . Current its display the global process owner.
- Still the issue occur
- 03:04 PM Bug #13980 (Closed): Remove the old standards in Template 1 & 2 and the field should be displayed the audit program name
- 03:04 PM Bug #13980: Remove the old standards in Template 1 & 2 and the field should be displayed the audit program name
- Verified in cycle2 915
- 02:57 PM Bug #13984 (Closed): After publishing, Auditor & Auditee name are missing in some fields.
- Verified in cycle 1(915)
- 02:33 PM Bug #14000 (Closed): Entity name need to display in process fields as per requirement
- Verified in Sp915
- 01:44 PM Bug #13960 (Yet to Verify): No validation is set for Copy & Paste in score tab
- Score value not able to enter
- 01:44 PM Bug #13829 (Closed): Groups -> Unable to add supplier contact person(S) as an auditee in auditee group. The user list is not showing the list in user list page
- Verified
- 01:42 PM Bug #11417 (Closed): LPA While Uploading Manual NC/OFI Category is not displaying in the drop down
- Verified
- 01:08 PM Bug #13999 (Closed): Audit status is not displayed after publishing.It can be text or color.If color it is Better
- Verified .Issue only in published document
- 01:07 PM Bug #14003 (Closed): Nc details & System improvement tab is missing, while clicking from the auditee response page
- Okay
- 01:06 PM Bug #14004 (Closed): Once its published data is not displayed after auditee response through advanced car
- 01:06 PM Bug #14004: Once its published data is not displayed after auditee response through advanced car
- they have removed the nc details page.
- 12:14 PM Bug #14369 (Closed): Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- 12:14 PM Bug #14369 (Fixed with Hotfix): Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- 12:14 PM Bug #14369: Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- Could not be able to replicate this issue
- 12:13 PM Bug #14369 (Open): Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- 10:20 AM Bug #14369 (Closed): Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail content details
- Customize Email Message: When clicking on Customize Email Message menu, it showing the inspection control mail conten...
10/15/2019
- 06:18 PM Bug #13997 (Closed): While hovering icon is hidden in checklist page
- Verified in SP915-CY2 on 15-10-2019
- 05:51 PM Bug #14011 (Closed): Reports -> LPA - Audit Plan Vs Actual Adherence report is not working as expected. Getting an error after clicking on View Report
- Verified in SP915-CY2 on 15-10-2019
- 05:50 PM Bug #13893 (Closed): Corrective Actions -> Submit button is not working inside car approach form
- Verified in SP915-CY2 on 15-10-2019
- 05:50 PM Unit Level and Cosmetic Issues #13896 (Closed): Perform Audit -> Upload NC/OFI tab -> Upload NC / OFI button is not displayed under respective tab
- Verified in SP915-CY2 on 15-10-2019
- 05:49 PM Bug #14012 (Closed): Report Menu -> Newly added reports are not displayed based on access right
- Verified in SP915-CY2 on 15-10-2019
- 05:40 PM Bug #14006 (Closed): While changing templates in audit program should not reflect in closed out & ongoing audits but it change in ready to perform audit.
- Verified in SP915-CY2 on 15-10-2019
- 05:40 PM Bug #13891 (Closed): Perform audit -> Upload OFI -> Clause field should not be mandatory. The field should be optional
- Verified in SP915-CY2 on 15-10-2019
- 05:33 PM Bug #13853 (Closed): LPA Audit Schedule Logic -> The schedule is not created for all the months for an equipment
- Verified in SP915-CY2 on 15-10-2019
- 05:32 PM Unit Level and Cosmetic Issues #13892 (Closed): Perform Audit -> Audit status -> Bench Mark label should be renamed as "Benchmark"
- Verified in SP915-CY2 on 15-10-2019
- 05:32 PM Bug #14358 (Closed): Equipment Part-Die Linkage: The system should not allow user to map the Expired die for the selected Equipment-Part linkage
- Equipment Part-Die Linkage: The system should not allow user to map the Expired die for the selected Equipment-Part ...
- 05:30 PM Bug #13948 (Closed): Process/Activities ->Process Clause mapping screen when clicked on save without modifying any thing displays Delete Confirmation message
- Verified in SP915-CY2 on 15-10-2019
- 05:29 PM Bug #13941 (Closed): LPA : Audit report publish is not working as expected
- Verified in SP915-CY2 on 15-10-2019
- 05:29 PM Bug #13949 (Closed): Perform Audit->Upload Audit record when clicked displays alert as "Please set Doc Pro Level in Business Rule" though level is selected in BR
- Verified in SP915-CY2 on 15-10-2019
- 05:29 PM Bug #13950 (Closed): LPA category after delete displays Blank page
- Verified in SP915-CY2 on 15-10-2019
- 05:28 PM Bug #13965 (Closed): Assign audit type and form window when closed after assigning form displays alert as "It looks like you have been editing something. If you leave before saving, your changes will be lost."
- Verified in SP915-CY2 on 15-10-2019
- 05:28 PM Bug #13885 (Closed): Not able to save the Template from the schedule which is already created
- Verified in SP915-CY2 on 15-10-2019
- 05:27 PM Bug #13959 (Closed): Minus values should not displayed in Template 1
- Verified in SP915-CY2 on 15-10-2019
- 05:26 PM Bug #13879 (Closed): Auditor(s) are not displaying in Layer screen when tried to map auditor for a layer
- Verified in SP915-CY2 on 15-10-2019
- 05:24 PM Bug #13880: Unable to create actual audit after confirmed the status still its in tentative status
- Verified in SP915-CY2 on 15-10-2019
- 05:24 PM Bug #13880 (Closed): Unable to create actual audit after confirmed the status still its in tentative status
- Verified
- 05:23 PM Bug #12069: We should able to add and scheduler the part while status inprogress and completed
- Verified in SP915-CY2 on 15-10-2019
- 05:23 PM Bug #12069 (Closed): We should able to add and scheduler the part while status inprogress and completed
- 05:23 PM Bug #12069: We should able to add and scheduler the part while status inprogress and completed
- Verified
- 05:23 PM Bug #13967 (Closed): Non conformity filed entered description is not displaying fully in audit report publish
- Verified in SP915-CY2 on 15-10-2019
- 05:21 PM Bug #13976 (Closed): Audit report publish alert message is not displaying when clicked on submit
- Verified in SP915-CY2 on 15-10-2019
- 05:20 PM Bug #13977 (Closed): After submitting Audit report using customer template with all the marked fields in screen shot are filled and retrieved displays blank
- Verified in SP915-CY2 on 15-10-2019
- 05:17 PM Bug #13981 (Closed): when clicked on Reset button from LPA category screen displays breadcrumb and Audit program data from audit pro
- Verified in SP915-CY2 on 15-10-2019
- 05:17 PM Bug #13983 (Closed): When clicked on response date extension displays error
- Verified in SP915-CY2 on 15-10-2019
- 05:16 PM Bug #13995 (Closed): When customer report viewed from Audit status screen of the particular audit program displays server error
- Verified in SP915-CY2 on 15-10-2019
- 05:16 PM Bug #13877 (Closed): Labels not Converted in Frequency drop down of audit mode
- Verified in SP915-CY2 on 15-10-2019
- 05:14 PM Bug #14001 (Closed): Map entity ->Show all audit programs when clicked navigation buttons displays in large size
- Verified in SP915-CY2 on 15-10-2019
- 05:14 PM Unit Level and Cosmetic Issues #14009 (Closed): For OFI Clause field displays (Opt Opt) twice
- Verified in SP915-CY2 on 15-10-2019
- 05:14 PM Bug #14015 (Closed): Audit Program List -> LPA Program name should not be displayed in listing page
- Verified in SP915-CY2 on 15-10-2019
- 05:05 PM Bug #14013 (Closed): Response date extension and action owner change request is not displaying to respective auditors
- Verified in SP915-CY2 on 15-10-2019
- 05:05 PM Bug #14059 (Closed): Checklist Score - Setup ->Color code selection popup is not displaying for newly created checkpoint
- Verified in SP915-CY2 on 15-10-2019
- 05:05 PM Bug #14060 (Closed): Checklist Score - Setup ->System is not allowing to create new section or sub section under compliance
- Verified in SP915-CY2 on 15-10-2019
- 05:05 PM Bug #14061 (Closed): Checklist Score - Setup->System is not allowing to change the color code assigned to a checkpoint once after saved.
- Verified in SP915-CY2 on 15-10-2019
- 05:04 PM Bug #14062 (Closed): Checklist Score - Fill Checklist-> Color code need to be revert back to no color when selected to "Select" from the drop down
- Verified in SP915-CY2 on 15-10-2019
- 05:04 PM Bug #14007 (Closed): When clicked on Existing Audit program displays sever error
- Verified in SP915-CY2 on 15-10-2019
- 05:04 PM Bug #14016 (Closed): LPA Category -> LPA Program and Add/View clauses tab should not be displayed for LPA Program category
- Verified in SP915-CY2 on 15-10-2019
- 05:03 PM Bug #14021 (Closed): Equipment -> Checklist Tab -> The admin could edit check points once it is created. But edited information are not getting displayed while retrieving the page
- Verified in SP915-CY2 on 15-10-2019
- 05:02 PM Bug #14349 (Closed): Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert message is not displayed and also not redirecting to the die master screen
- Die: When a user tries to capture and save the status of used die from In use to Discard from asset, the alert messag...
- 04:59 PM Bug #14020 (Closed): LPA Category -> Issues in LPA CATEGORY page.
- Verified in SP915-CY2 on 15-10-2019
- 04:57 PM Unit Level and Cosmetic Issues #14028 (Closed): Same Color Need to be display for all the audit cells when Scheduler not confirm the audit schedule from status drop down
- Verified in SP915-CY2 on 15-10-2019
- 04:45 PM Bug #14347 (Closed): Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the classification of the die
- Die PM Supervisor calendar and PM Calendar --> Instead of showing criticality drop down field, it should display the ...
- 04:40 PM Bug #13860 (Closed): LPA Schedule ->Duplicate checklist is displayed
- Verified in SP915-CY2 on 15-10-2019
- 04:35 PM Bug #14014 (Closed): Once its publish successfully message is not displayed in month view page.
Verified in SP915-CY2 on 15-10-2019- 04:35 PM Bug #14019: Without entering the clause it should allow me to move further based on the option "NC clause mandatory" option
Verified in SP915-CY2 on 15-10-2019- 04:35 PM Bug #14019 (Closed): Without entering the clause it should allow me to move further based on the option "NC clause mandatory" option
- 04:34 PM Bug #14110 (Closed): While Selecting the drop down list system display only the "Conditional" option
- 04:33 PM Bug #14186: Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
Verified in SP915-CY2 on 15-10-2019- 03:34 PM Bug #14186 (Closed): Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
- 04:33 PM Bug #14119 (Closed): Deselect the option is not working for Clause in Nc/OFI page
- 04:33 PM Bug #14119: Deselect the option is not working for Clause in Nc/OFI page
Verified in SP915-CY2 on 15-10-2019- 04:16 PM Unit Level and Cosmetic Issues #13832 (Closed): Supplier -> Alert message content has to change. The content "UserName Already Exists" should be renamed as "Username Already Exists"
- Verified in SP915-CY2 on 15-10-2019
- 04:13 PM Unit Level and Cosmetic Issues #13864 (Not Fixed with Hotfix): Supplier -> Spell mistake in various pages / Content change in alert message
- 2. Contact(s) -> deactivate success message "•The selected user [email protected] Decativated Sucessfully" ...
- 03:58 PM Bug #14344 (Not Resolved): Production OEE(Die Life Cycle): When the actual quantity(1065) exceeded from the life cycle count(1000), the part details is not showing in the screen
- Production OEE(Die Life Cycle): When the actual quantity(1065) exceeded from the life cycle count(1000), the part det...
- 03:57 PM Bug #14058 (Closed): Checklist Score - Setup- N/A value is not displaying for checkpoint after save and retrieve
- Verified in SP915-CY2 on 15-10-2019
- 03:55 PM Bug #14022 (Closed): Define Audit Program -> Label displaying as "THLNCClauseMandatory"
- 03:55 PM Bug #13881 (Closed): Both the Validation alerts are displaying at same time when LPA schedule is created
- 03:34 PM Bug #14189 (Closed): Sprint 4: Auditor Log - Auditor full name need to displayed in Audit plan popup
- Verified in SP915-CY2 on 15-10-2019
- 03:32 PM Bug #13966 (Closed): Un mapped auditee contact person is displaying in Audit report while publishing audit report
- Verified in SP915-CY2 on 15-10-2019
- 03:23 PM Bug #14008 (Closed): Creating a New Audit program is not getting saved and displays some other data of some other audit programs
- 01:05 PM Unit Level and Cosmetic Issues #13845 (Closed): Templates --> Planned audit and actual audit button is displayed for existing records
- Verified in SP915-CY2 on 15-10-2019
- 01:04 PM Unit Level and Cosmetic Issues #13844 (Closed): Templates -> Existing and New Template -> Label missing for supplier plant address and supplier part
- Verified in SP915-CY2 on 15-10-2019
- 01:02 PM Bug #13842 (Closed): Templates -> Existing and New Template -> Default elements are missing under "Available elements"
- Verified in SP915-CY2 on 15-10-2019
- 01:01 PM Bug #13839: All Actions -> Actions page is not working. The action list is showing "Loading" only
- Verified in SP915-CY2 on 15-10-2019
- 01:01 PM Bug #13839 (Closed): All Actions -> Actions page is not working. The action list is showing "Loading" only
- 12:51 PM Bug #13823 (Closed): Define Audit program -> Supplier Audit Program -> MAP Segment -> This option should not be displayed for Audit pro - Audit program
- Verified in SP915-CY2 on 15-10-2019
- 12:42 PM Bug #13820 (Not Resolved): Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- Had a discussion with Bijoy on 30 September 2019. As per his comment it has to fix it on Sprint-5 (Regression Testing...
- 12:38 PM Bug #13817 (Closed): Auditpro Checklist -> List Score > N/A Value is not getting displayed in Status field
- Verified in SP915-CY2 on 15-10-2019
- 12:15 PM Bug #13805 (Closed): Business Rules->"NC/OFI Emails to all Auditor" option is available for Auditpro
- Verified in SP915-CY2 on 15-10-2019
10/14/2019
- 05:02 PM Unit Level and Cosmetic Issues #14304 (Closed): Die: When entering the value as "0000" or 0000000"11111111", Need validation for Life Cycle Count as *"The value you entered is not valid"*
- Die: When entering the value as "0000" or 0000000"11111111", Need validation for Life Cycle Count as *"The value you ...
- 04:39 PM Unit Level and Cosmetic Issues #14303 (Closed): Die: Need to change the "Please enter cycle time" alert message as "Please enter the Die Life cycle count"
- Die: Need to change the "Please enter cycle time" alert message as "Please enter the Die Life cycle count"
- 04:26 PM Bug #14299 (Closed): Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected
- Die- Manufacturer field--> While editing the manufacturer details, it is not working as expected.
Condition 1: Whe... - 03:31 PM Bug #14295 (Closed): Equipment: Asset Number field--> It should not accept the same asset number for different equipment
- Issue 1: Equipment: Asset Number field--> It should not accept the same asset number for different equipment.
Issu... - 03:02 PM Bug #14283 (Closed): Equipment: Asset Number--> When entering more than 10 characters and saving the details, the system getting hanged and also alert message is not displayed
- Issue 1: Equipment: Asset Number--> When entering more than 10 characters and saving the details, the system getting ...
10/11/2019
- 02:19 PM Bug #14174 (Resolved): Requirement Tree: Same child element is displayed for different parent in Requirement tree
- 02:19 PM Bug #14164 (Resolved): FSR - While opening FSR document for Few PI(Front Impact Airbag System/Airbag), System opens Visual Studio alert. When selecting it, Session is terminated.
- 02:19 PM Bug #14138 (Resolved): EFC Tree: When selecting EFC tree diagram the parent PI itself displaying as child for the same Element
- 02:19 PM Bug #14136 (Resolved): While clicking OK button from EFC tree flow down indicator the page got hanged
- 02:19 PM Bug #14132 (Resolved): Failure Tree: Same child element is displayed for different parent in Failure tree
- 02:04 PM Bug #14135 (Resolved): EFC Tree: While opening EFC tree it contains large space at bottom of the page
- 11:30 AM Bug #14102 (Resolved): Design VDA - Structure Analysis - Level marker remains same for all the Levels even after Expand/Collapse is done. (Refer Description)
- 11:29 AM Bug #14113 (Resolved): Design VDA - Structure Analysis - While Drag and Drop any element and clicking Cancel icon, system automatically Moves the element on the Dropped element
- 11:29 AM Bug #14115 (Resolved): Design VDA - Structure Analysis - System allows to Copy an element and Drop on another element in the Same Level. Following Issues occurs while doing the above operation.
10/10/2019
- 05:39 PM Bug #13797 (Closed): Business Rules->DocPro level selector in Supplier portal is reflected in AuditPro Business Rules DocPro level selector
- working fine
- 10:54 AM Bug #14186 (Resolved): Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
- 10:54 AM Bug #14186 (Open): Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
- 10:53 AM Bug #14189 (Resolved): Sprint 4: Auditor Log - Auditor full name need to displayed in Audit plan popup
- 10:53 AM Bug #14189 (Open): Sprint 4: Auditor Log - Auditor full name need to displayed in Audit plan popup
10/09/2019
- 10:43 AM Bug #13963 (Fixed with Hotfix): VAM perform audit->NC/OFI category displays twice(Duplicate value for NC and OFI category).Please refer screen shot
- Working fine
10/03/2019
- 11:58 PM Bug #13987 (Closed): In 8D-HW form, in D0 clicking below Action label shows the following error.
- 11:57 PM Bug #14208 (Open): Clicking on the FMEA link in analysis form, shows "Object Reference not set" error message
- Clicking on the FMEA link in analysis form, shows "Object Reference not set" error message
- 05:41 PM Bug #14205 (Resolved): Assign audit form and type data is shared between auditpro and supplier management
- Assign audit form and type data is shared between auditpro and supplier management
- 03:55 PM Bug #14186: Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
- Patch was applied not as reorg. it will work in build. issue was not opened i assigned back to you to change the status
- 03:53 PM Bug #14189: Sprint 4: Auditor Log - Auditor full name need to displayed in Audit plan popup
- Patch was applied not as reorg. it will work in build. Since issue was not opened i assigned back to you to change th...
- 03:30 PM Bug #14185 (Open): Design VDA - While adding Failure Without Function and Requirement, system creates a Blank Function without connection with the Failure.
- 03:27 PM Bug #14174 (Open): Requirement Tree: Same child element is displayed for different parent in Requirement tree
- 03:23 PM Bug #14195 (Open): Design VDA - Structure Analysis - Pagination for the Diagram increases even when collapsing the Elements. (Refer Desciption)
10/01/2019
- 04:22 PM Bug #14105 (Resolved): Design VDA - Structure Analysis - By Default system displays wrong count in 'From Component Level'
- 04:20 PM Bug #14116 (Resolved): Design VDA - Failure Analysis - For a Failure Flowdown without Requirement system displays Parent Element in the same level of Child element
- 04:19 PM Bug #14170 (Resolved): Design and Process VDA - Step 7 is displayed for Percentage allocations
- 04:18 PM Bug #14170 (Open): Design and Process VDA - Step 7 is displayed for Percentage allocations
- 04:18 PM Bug #14194 (Resolved): Severity - Assigned Severity value is not updated in any of the Documents/Pages.
- 04:17 PM Bug #14194 (Open): Severity - Assigned Severity value is not updated in any of the Documents/Pages.
- 12:45 PM Bug #14194 (Closed): Severity - Assigned Severity value is not updated in any of the Documents/Pages.
- Assigned Severity value is not updated in any of the Documents/Pages.
- 02:19 PM Bug #14195 (Closed): Design VDA - Structure Analysis - Pagination for the Diagram increases even when collapsing the Elements. (Refer Desciption)
- • After expanding the third level Expand Arrow is displayed unnecessarily.
• Pagination for the Diagram increases ... - 01:18 PM Unit Level and Cosmetic Issues #14028 (Resolved): Same Color Need to be display for all the audit cells when Scheduler not confirm the audit schedule from status drop down
- WAD. It is due to background it shows the first rows as bright.scroll and verify kindly find screen shot.
- 10:36 AM Bug #13797 (Not Resolved): Business Rules->DocPro level selector in Supplier portal is reflected in AuditPro Business Rules DocPro level selector
- This can be replicate when new site as there is no data set up in business rule (auditpro & supplier management)
09/30/2019
- 09:55 PM Bug #13829 (Resolved): Groups -> Unable to add supplier contact person(S) as an auditee in auditee group. The user list is not showing the list in user list page
- 08:48 PM Bug #14189 (Closed): Sprint 4: Auditor Log - Auditor full name need to displayed in Audit plan popup
- Sprint 4: Auditor Log - Auditor full name need to displayed in Audit plan popup
- 08:46 PM Unit Level and Cosmetic Issues #14188 (Open): Sprint 4 : Auditor log - Text need to change Audit plan and space is needed between add and delete button ( Above and below)
- Please make spacing properly
- 08:43 PM Bug #14119 (Resolved): Deselect the option is not working for Clause in Nc/OFI page
- 08:36 PM Bug #14119 (In Progress): Deselect the option is not working for Clause in Nc/OFI page
- 01:34 PM Bug #14119 (Open): Deselect the option is not working for Clause in Nc/OFI page
- 08:36 PM Bug #13980 (Resolved): Remove the old standards in Template 1 & 2 and the field should be displayed the audit program name
- 08:32 PM Unit Level and Cosmetic Issues #14187 (Open): Default three rows need to add in Audit plan page
- Default three rows need to add in Audit plan page
- 08:27 PM Bug #13969 (Closed): Sign is not displayed in template 1 & 2
- WAD. Discussed with Bijoy and Nikhil on 30-09-2019
- 08:26 PM Bug #13969 (Fixed with Hotfix): Sign is not displayed in template 1 & 2
- 08:25 PM Bug #14065 (Closed): Checklist Score - Setup -> Checkpoint score is not applicable for LPA audits
- Not an issue. Discussed with Bijoy and Nikhil on 30-09-2019
- 07:45 PM Bug #14065 (Resolved): Checklist Score - Setup -> Checkpoint score is not applicable for LPA audits
- Not an issue, its not a score that's business login
- 01:34 PM Bug #14065 (Open): Checklist Score - Setup -> Checkpoint score is not applicable for LPA audits
- 08:24 PM Bug #14186 (Closed): Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we able to move further
- Sprint 4: Auditor log - Based on audit program the Audit details plan is mandatory, without filling the audit plan we...
- 07:52 PM Bug #14021 (Resolved): Equipment -> Checklist Tab -> The admin could edit check points once it is created. But edited information are not getting displayed while retrieving the page
- 07:03 PM Bug #14021 (In Progress): Equipment -> Checklist Tab -> The admin could edit check points once it is created. But edited information are not getting displayed while retrieving the page
- 03:53 PM Bug #14021 (Not Fixed with Hotfix): Equipment -> Checklist Tab -> The admin could edit check points once it is created. But edited information are not getting displayed while retrieving the page
- 07:52 PM Bug #14004 (Resolved): Once its published data is not displayed after auditee response through advanced car
- 11:08 AM Bug #14004 (In Progress): Once its published data is not displayed after auditee response through advanced car
- 07:52 PM Bug #13984 (Resolved): After publishing, Auditor & Auditee name are missing in some fields.
- 06:01 PM Bug #13984 (In Progress): After publishing, Auditor & Auditee name are missing in some fields.
- 07:52 PM Bug #13970 (Resolved): "Date of audit"content is missing.Start & end time format is incorrect based scheduler page.
- 06:31 PM Bug #13970 (In Progress): "Date of audit"content is missing.Start & end time format is incorrect based scheduler page.
- Start & end time format - Time format is as per previous Versions.
- 07:52 PM Usability #13968 (Resolved): Rename the Audit report based on the template selection.Name should be static not link
- 06:36 PM Usability #13968 (In Progress): Rename the Audit report based on the template selection.Name should be static not link
- It is a breadcrumb for refreshing the page. Name is changed - as per QA suggestion
- 01:34 PM Usability #13968 (Open): Rename the Audit report based on the template selection.Name should be static not link
- 07:52 PM Bug #13962 (Resolved): Template 1 & Template 2 some of fields are not matching after publishing
- 12:49 PM Bug #13962 (In Progress): Template 1 & Template 2 some of fields are not matching after publishing
- 07:52 PM Bug #13960 (Resolved): No validation is set for Copy & Paste in score tab
- 01:26 PM Bug #13960 (In Progress): No validation is set for Copy & Paste in score tab
- You can Copy and paste. But will validate.
- 07:52 PM Bug #13951 (Resolved): VEM->Perform audit screen->View previous car->On clicking show audit or Show Car's button server error is showing
- 07:52 PM Bug #13881 (Resolved): Both the Validation alerts are displaying at same time when LPA schedule is created
- 07:21 PM Bug #13881 (In Progress): Both the Validation alerts are displaying at same time when LPA schedule is created
- 05:41 PM Bug #13881 (Not Fixed with Hotfix): Both the Validation alerts are displaying at same time when LPA schedule is created
- displays blank alert
- 07:47 PM Bug #14026 (Resolved): Reports ->"NC Closure" - Report -> "Total closure count" and "Count of Open" and "Count of Closed" is not displayed the exact count
- 05:31 PM Bug #14026 (Not Fixed with Hotfix): Reports ->"NC Closure" - Report -> "Total closure count" and "Count of Open" and "Count of Closed" is not displayed the exact count
- 06:32 PM Bug #14000 (Resolved): Entity name need to display in process fields as per requirement
- Need to verify in sprint, it was updated on saturday
- 06:02 PM Bug #14000 (Not Fixed with Hotfix): Entity name need to display in process fields as per requirement
- 06:27 PM Bug #14024 (Fixed with Hotfix): Reports -> All New Reports -> Chart View -> X axis and Y axis value should be displayed on mouse over
- 06:27 PM Bug #14185 (Closed): Design VDA - While adding Failure Without Function and Requirement, system creates a Blank Function without connection with the Failure.
- While adding Failure Without Function and Requirement, system creates a Blank Function without connection with the Fa...
- 06:25 PM Bug #13961 (Fixed with Hotfix): Duplicate NC is displayed in NC Details Page.
- 06:25 PM Bug #13961 (Resolved): Duplicate NC is displayed in NC Details Page.
- 03:52 PM Bug #13961 (Not Fixed with Hotfix): Duplicate NC is displayed in NC Details Page.
- 06:06 PM Bug #13982 (Resolved): Date of Audit is missing in Template 2 after publishing.
- Date of audit is published Date. WAD
- 06:05 PM Bug #13941 (Fixed with Hotfix): LPA : Audit report publish is not working as expected
- 05:57 PM Bug #13971 (Closed): Based on NC Category it need to displayed in publish document
- 05:57 PM Bug #13971: Based on NC Category it need to displayed in publish document
- After our disscuss, It is issue. Details are display is correct in form.
issue occur due to edit the fields, data ... - 05:55 PM Bug #13948 (Fixed with Hotfix): Process/Activities ->Process Clause mapping screen when clicked on save without modifying any thing displays Delete Confirmation message
- Verified in 248
- 10:46 AM Bug #13948 (Resolved): Process/Activities ->Process Clause mapping screen when clicked on save without modifying any thing displays Delete Confirmation message
- 05:55 PM Bug #13975 (Fixed with Hotfix): LPA category displays Validation header name as "Error message"
- Screen is changed
- 05:54 PM Unit Level and Cosmetic Issues #13896 (Fixed with Hotfix): Perform Audit -> Upload NC/OFI tab -> Upload NC / OFI button is not displayed under respective tab
- 05:08 PM Unit Level and Cosmetic Issues #13896 (Resolved): Perform Audit -> Upload NC/OFI tab -> Upload NC / OFI button is not displayed under respective tab
- Not able to replicate
- 01:34 PM Unit Level and Cosmetic Issues #13896 (Open): Perform Audit -> Upload NC/OFI tab -> Upload NC / OFI button is not displayed under respective tab
- 05:50 PM Bug #14018 (Closed): Audit program->Need validation for while selecting the clause as mandatory it should allow to save without selection the clause
- After discuss with raja, closing this issue
- 05:50 PM Bug #13981 (Fixed with Hotfix): when clicked on Reset button from LPA category screen displays breadcrumb and Audit program data from audit pro
- Screen is totally changed
- 05:49 PM Bug #13976 (Fixed with Hotfix): Audit report publish alert message is not displaying when clicked on submit
- Verified
- 05:49 PM Bug #13995 (Fixed with Hotfix): When customer report viewed from Audit status screen of the particular audit program displays server error
- 05:46 PM Unit Level and Cosmetic Issues #13892 (Fixed with Hotfix): Perform Audit -> Audit status -> Bench Mark label should be renamed as "Benchmark"
- 05:05 PM Unit Level and Cosmetic Issues #13892 (Resolved): Perform Audit -> Audit status -> Bench Mark label should be renamed as "Benchmark"
- 01:34 PM Unit Level and Cosmetic Issues #13892 (Open): Perform Audit -> Audit status -> Bench Mark label should be renamed as "Benchmark"
- 05:44 PM Unit Level and Cosmetic Issues #14009 (Fixed with Hotfix): For OFI Clause field displays (Opt Opt) twice
- 04:57 PM Unit Level and Cosmetic Issues #14009 (Resolved): For OFI Clause field displays (Opt Opt) twice
- 01:34 PM Unit Level and Cosmetic Issues #14009 (Open): For OFI Clause field displays (Opt Opt) twice
- 05:41 PM Bug #14060 (Fixed with Hotfix): Checklist Score - Setup ->System is not allowing to create new section or sub section under compliance
- 04:58 PM Bug #14060 (Resolved): Checklist Score - Setup ->System is not allowing to create new section or sub section under compliance
- WAD
- 01:34 PM Bug #14060 (Open): Checklist Score - Setup ->System is not allowing to create new section or sub section under compliance
- 05:38 PM Bug #13966 (Fixed with Hotfix): Un mapped auditee contact person is displaying in Audit report while publishing audit report
- 05:38 PM Bug #13967 (Fixed with Hotfix): Non conformity filed entered description is not displaying fully in audit report publish
- 05:37 PM Bug #14027 (Fixed with Hotfix): Reports -> "Conformance by area and NC Closure" ->Menu / Label Changes in Report
- 01:34 PM Bug #14027 (Open): Reports -> "Conformance by area and NC Closure" ->Menu / Label Changes in Report
- 05:37 PM Bug #14013 (Fixed with Hotfix): Response date extension and action owner change request is not displaying to respective auditors
- 05:36 PM Bug #14025 (Fixed with Hotfix): Reports ->"Conformance By Area" - Report -> "Total checkpoint count" and "Count of checkpoint OK" is not displayed the exact count
- 05:25 PM Bug #13950 (Fixed with Hotfix): LPA category after delete displays Blank page
- 05:14 PM Bug #13959 (Resolved): Minus values should not displayed in Template 1
- 05:01 PM Bug #14011 (Fixed with Hotfix): Reports -> LPA - Audit Plan Vs Actual Adherence report is not working as expected. Getting an error after clicking on View Report
- 04:58 PM Bug #14012 (Fixed with Hotfix): Report Menu -> Newly added reports are not displayed based on access right
- 04:39 PM Bug #13895 (Fixed with Hotfix): Reports Deployment -> Getting error message while executing a job after deploying AP report
- 04:39 PM Bug #13894 (Fixed with Hotfix): Equipment Import -> Unable to import equipments. Getting empty alert message and blank tree
- 04:37 PM Bug #13893 (Fixed with Hotfix): Corrective Actions -> Submit button is not working inside car approach form
- 04:34 PM Unit Level and Cosmetic Issues #13897 (Closed): Perform Audit -> Fill Checklist -> Duplicate checkpoints are displayed
- Agree. Closed this issue by QA
- 02:46 PM Unit Level and Cosmetic Issues #13897 (Resolved): Perform Audit -> Fill Checklist -> Duplicate checkpoints are displayed
- Not an issue. Checklist + Description will come along in this field. same checklist info is added in description area
- 01:34 PM Unit Level and Cosmetic Issues #13897 (Open): Perform Audit -> Fill Checklist -> Duplicate checkpoints are displayed
- 04:03 PM Bug #14016 (Fixed with Hotfix): LPA Category -> LPA Program and Add/View clauses tab should not be displayed for LPA Program category
- 03:55 PM Bug #14020 (Fixed with Hotfix): LPA Category -> Issues in LPA CATEGORY page.
- 03:42 PM Bug #14058 (Fixed with Hotfix): Checklist Score - Setup- N/A value is not displaying for checkpoint after save and retrieve
- 01:54 PM Bug #14058 (Resolved): Checklist Score - Setup- N/A value is not displaying for checkpoint after save and retrieve
- 01:34 PM Bug #14058 (Open): Checklist Score - Setup- N/A value is not displaying for checkpoint after save and retrieve
- 03:37 PM Bug #14059 (Fixed with Hotfix): Checklist Score - Setup ->Color code selection popup is not displaying for newly created checkpoint
- 01:54 PM Bug #14059 (Resolved): Checklist Score - Setup ->Color code selection popup is not displaying for newly created checkpoint
- 01:34 PM Bug #14059 (Open): Checklist Score - Setup ->Color code selection popup is not displaying for newly created checkpoint
- 03:36 PM Bug #14061 (Fixed with Hotfix): Checklist Score - Setup->System is not allowing to change the color code assigned to a checkpoint once after saved.
- 01:53 PM Bug #14061 (Resolved): Checklist Score - Setup->System is not allowing to change the color code assigned to a checkpoint once after saved.
- 01:34 PM Bug #14061 (Open): Checklist Score - Setup->System is not allowing to change the color code assigned to a checkpoint once after saved.
- 03:35 PM Bug #14062 (Fixed with Hotfix): Checklist Score - Fill Checklist-> Color code need to be revert back to no color when selected to "Select" from the drop down
- 01:52 PM Bug #14062 (Resolved): Checklist Score - Fill Checklist-> Color code need to be revert back to no color when selected to "Select" from the drop down
- Resolved
- 01:34 PM Bug #14062 (Open): Checklist Score - Fill Checklist-> Color code need to be revert back to no color when selected to "Select" from the drop down
- 03:08 PM Bug #14174 (Closed): Requirement Tree: Same child element is displayed for different parent in Requirement tree
- Same child element is displayed for different parent element in Requirement tree
Requirement tree diagram has to d... - 02:51 PM Bug #14172 (Closed): Design and Process VDA - After refreshing the page, colour for Risk and Optimization changes to Red even for High values
- After refreshing the page, colour for Risk and Optimization changes to Red even for High values
- 02:46 PM Bug #14170 (Closed): Design and Process VDA - Step 7 is displayed for Percentage allocations
- Step 7 is displayed for Percentage allocations
- 02:41 PM Bug #14110 (Fixed with Hotfix): While Selecting the drop down list system display only the "Conditional" option
- 01:38 PM Bug #14110 (Resolved): While Selecting the drop down list system display only the "Conditional" option
- AS Per your Comment status changes to Resolved
- 01:34 PM Bug #14110 (Open): While Selecting the drop down list system display only the "Conditional" option
- 01:59 PM Unit Level and Cosmetic Issues #13979 (Resolved): Add and remove the text in NC details page
- Add Image cannot understand - based on your steps
Remove image fixed - 01:34 PM Unit Level and Cosmetic Issues #13979 (Open): Add and remove the text in NC details page
- 01:34 PM Bug #14166 (Open): FSR document contain large white space even after allocating the ASIL
- 01:05 PM Bug #14166 (Closed): FSR document contain large white space even after allocating the ASIL
- FSR document contain large white space on right side even after allocating the ASIL
Refer Screenshot - 01:34 PM Bug #14165 (Open): FSR - After allocating Function and Requirement in TSR for the child element and then opening FSR of child(Allocated) elements, system is displaying 'Technical Safety Concepts' as the Header
- 12:55 PM Bug #14165 (Closed): FSR - After allocating Function and Requirement in TSR for the child element and then opening FSR of child(Allocated) elements, system is displaying 'Technical Safety Concepts' as the Header
- After allocating Function and Requirement in TSR for the child element and then opening FSR of child(Allocated) eleme...
- 01:34 PM Bug #14164 (Open): FSR - While opening FSR document for Few PI(Front Impact Airbag System/Airbag), System opens Visual Studio alert. When selecting it, Session is terminated.
- 12:29 PM Bug #14164 (Closed): FSR - While opening FSR document for Few PI(Front Impact Airbag System/Airbag), System opens Visual Studio alert. When selecting it, Session is terminated.
- While opening FSR document for Few PI(Front Impact Airbag System/Airbag), System opens Visual Studio alert. When sele...
- 01:34 PM Bug #14163 (Open): Concern Name is not displaying in Approach Selection window in Initiate Problem Solving.
- 01:34 PM Bug #14162 (Open): Concern Name is not displaying in Approach Selection window in Initiate Problem Solving.
- 01:34 PM Bug #14161 (Open): In T-Map, PIT Closeout and 5 Why for, Opened date is not getting displayed.
- 01:34 PM Bug #14160 (Open): In 8D-HW form D7 field, in Review and Revise option, Planned and Actual date is not working as expected.
- 01:34 PM Bug #14159 (Open): In 8D-HW form D7 field, Actual date is not working as expected
- 01:34 PM Bug #14156 (Open): Cant able to create new Concern.
- 01:34 PM Bug #14147 (Open): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- 01:34 PM Bug #14145 (Open): Equipment: without entering the text value in Asset Number and tries to save the Equipment master details, it should display the alert message
- 01:34 PM Bug #14144 (Open): P-Diagram: Cannot give select option in control factors branch at control factor table
- 01:34 PM Bug #14141 (Open): When clicking insert in control factor it create branch in responds table
- 01:34 PM Bug #14140 (Open): PM Supervisor calendar: The selected activity is not getting displayed in the planned maintenance Activity field
- 01:34 PM Bug #14139 (Open): PM Calendar: Planned Maintenance list-->The assigned user name details is not showing in the Activity's user list pop up window
- 01:34 PM Bug #14138 (Open): EFC Tree: When selecting EFC tree diagram the parent PI itself displaying as child for the same Element
- 01:34 PM Bug #14137 (Open): PM Supervisor Calendar: The system should not display default selection as days in Activity duration description
- 01:34 PM Bug #14136 (Open): While clicking OK button from EFC tree flow down indicator the page got hanged
- 01:34 PM Bug #14135 (Open): EFC Tree: While opening EFC tree it contains large space at bottom of the page
- 01:34 PM Bug #14132 (Open): Failure Tree: Same child element is displayed for different parent in Failure tree
- 01:34 PM Bug #14129 (Open): PM Supervisor and Die PM Supervisor Calendar: The status of planned maintenance should display the status which is showing in the calendar
- 01:34 PM Bug #14128 (Open): While clicking on requirement tree is not opened.
- 01:34 PM Bug #14116 (Open): Design VDA - Failure Analysis - For a Failure Flowdown without Requirement system displays Parent Element in the same level of Child element
- 01:34 PM Bug #14115 (Open): Design VDA - Structure Analysis - System allows to Copy an element and Drop on another element in the Same Level. Following Issues occurs while doing the above operation.
- 01:34 PM Bug #14113 (Open): Design VDA - Structure Analysis - While Drag and Drop any element and clicking Cancel icon, system automatically Moves the element on the Dropped element
- 01:34 PM Bug #14108 (Open): Design VDA - Structure Analysis - Pagination is not working while Expand/Collapse from Double click and Arrow
- 01:34 PM Bug #14107 (Open): While doing flow down from Failure tree the system throws Timeout Error
- 01:34 PM Bug #14105 (Open): Design VDA - Structure Analysis - By Default system displays wrong count in 'From Component Level'
- 01:34 PM Bug #14102 (Open): Design VDA - Structure Analysis - Level marker remains same for all the Levels even after Expand/Collapse is done. (Refer Description)
- 01:34 PM Bug #14095 (Open): While expanding concern number definition tab in Business Rule shows "Sorry an error occurred while processing your request" error message
- 01:34 PM Bug #14093 (Open): In Pit closeout, concern Details area all the fields are displayed as editable
- 01:34 PM Bug #14092 (Open): Production OEE: When a user tries to Edit the Parts production record, the setup dropdown field displays as Empty field.
- 01:34 PM Bug #14091 (Open): In 5Whys form the # field is editable.
- 01:34 PM Bug #14090 (Open): In 5Whys form, all the fields in Concerns are able to edit.
- 01:34 PM Bug #14089 (Open): In P-Map and Control Plan while loading for the first time the border are not displaying properly. While its border are not loaded, it allowd the user to edit the contents.
- 01:34 PM Bug #14088 (Open): In T-Map for the first time Add, Delete, Exclude are not displaying in Right clicck option.
- 01:34 PM Bug #14087 (Open): In T-Map there is no consistency in displaying the default data in the form.
- 01:34 PM Bug #14086 (Open): In D2, % of parts affected field calculation is wrong.
- 01:34 PM Bug #14085 (Open): In D1, email id field shows as Editable.
- 01:34 PM Bug #14084 (Open): Clicking on the Date and Action description under Emergency Response Actions, Shows "Object reference not set to an instance of an Object".
- 01:34 PM Bug #14083 (Open): In D0 Part number is displayed as editable, if user tires to edit shows alert as editing is not allowed for this property.
- 01:34 PM Bug #14082 (Open): Progress Tracker in 8D-HW form is not working, Status area shows error and closure date also no getting fetched.
- 01:34 PM Bug #14081 (Open): Supplier element is editable in 8d-HW form summary and in D2.
- 01:34 PM Bug #14080 (Open): Control plan taking more time to get loaded.
- 01:34 PM Bug #14079 (Open): In Possible cause, cant able to do data entry.
- 01:34 PM Bug #14078 (Open): In concern numbering, along with entity short name some junk data are displaying.
- 01:34 PM Bug #14077 (Open): Production OEE: When booking the Production OEE for Assembly Line, it should not display the assembly line selection field as "Equipment Name/Equipment Code"
- 01:34 PM Bug #14072 (Open): Equipment Part - Die Linkage: When a user tries to delete the part which is linked with die details and select the same part. The system is showing the existing selected die details for same selected part
- 01:34 PM Bug #14064 (Open): Equipment Part - Die Linkage: When a user tries to delete the part for assembly line, it should get delete from the Equipment which is created under the assembly line
- 01:34 PM Bug #14048 (Open): Equipment Part - Die Linkage: Die Name--> When a user tries to select the multiple die name and unselect few from the list. It is not working as expected.
- 01:34 PM Bug #14047 (Open): Equipment Part Linkage: Not able to map the parts for the selected assembly line.
- 01:34 PM Bug #14045 (Open): Trade --> When clicking on Trade menu, it displays blank screen with loading comment. Due to this issue not able to create the spare part master. (So imported the spare part and proceeded further)
- 01:34 PM Bug #14044 (Open): Die Import--> Need Imported Manufacturer selection details in Die Import option
- 01:34 PM Bug #14043 (Open): Die --> No need separate label for Imported Manufacturer checkbox. While placing the cursor in checkbox, the system should display the tooltip as Imported Manufacturer
- 01:34 PM Unit Level and Cosmetic Issues #14042 (Open): Die --> Imported Manufacture label should be renamed to Imported Manufacturer
- 01:34 PM Unit Level and Cosmetic Issues #14028 (Open): Same Color Need to be display for all the audit cells when Scheduler not confirm the audit schedule from status drop down
09/28/2019
- 09:01 PM Bug #14163 (Open): Concern Name is not displaying in Approach Selection window in Initiate Problem Solving.
- Concern Name is not displaying in Approach Selection window in Initiate Problem Solving.
- 09:00 PM Bug #14162 (Open): Concern Name is not displaying in Approach Selection window in Initiate Problem Solving.
- Concern Name is not displaying in Approach Selection window in Initiate Problem Solving.
- 08:39 PM Bug #14161 (Open): In T-Map, PIT Closeout and 5 Why for, Opened date is not getting displayed.
- In T-Map, PIT Closeout and 5 Why for, Opened date is not getting displayed.
- 08:29 PM Bug #14160 (Open): In 8D-HW form D7 field, in Review and Revise option, Planned and Actual date is not working as expected.
- In 8D-HW form D7 field, in Review and Revise option, Planned and Actual date is not working as expected.
- 08:27 PM Bug #14159 (Open): In 8D-HW form D7 field, Actual date is not working as expected
- In 8D-HW form D7 field, Actual date is not working as expected
- 04:06 PM Bug #14156 (Open): Cant able to create new Concern.
- Cant able to create new Concern. While clicking on submit shows "Error processing your request" error message.
- 04:01 PM Bug #13954 (Resolved): Server when session time out.When the url not in use for some time and tried to log out,server error is displaying.Please refer screen shot
- Kindly make it as Known issue. After Discussed with biju and bijoy
- 03:59 PM Bug #13820 (Resolved): Audit Program -> Supplier Audit -> Map entity -> Unassigned user is displayed in primary contact person user list
- If user have rights for Supplier Portal, User will also need to include in the list. Requirement Given by bijoy. Kind...
- 03:56 PM Bug #13823: Define Audit program -> Supplier Audit Program -> MAP Segment -> This option should not be displayed for Audit pro - Audit program
- Please move to TBD for Discussion. Because i don't have option to move. i changed to resolve
- 03:55 PM Bug #13823 (Resolved): Define Audit program -> Supplier Audit Program -> MAP Segment -> This option should not be displayed for Audit pro - Audit program
- 03:53 PM Bug #13941 (Resolved): LPA : Audit report publish is not working as expected
- Cannot able to replicate for module auto approval
- 02:26 PM Bug #13816 (Resolved): AuditPro Checklist -> Aggregate Value (%) and Q type is getting displayed for the score "Q_Type"
- 02:08 PM Bug #13810 (Resolved): VEM->CAR->Unable to do submit to auditee.(clicking publish no published message)
- 01:59 PM Bug #13893 (Resolved): Corrective Actions -> Submit button is not working inside car approach form
- 01:57 PM Bug #13976 (Resolved): Audit report publish alert message is not displaying when clicked on submit
- 01:17 PM Bug #14021 (Resolved): Equipment -> Checklist Tab -> The admin could edit check points once it is created. But edited information are not getting displayed while retrieving the page
- Boopathi Verified in SP915 and it is working as expected
- 01:10 PM Bug #13966 (Resolved): Un mapped auditee contact person is displaying in Audit report while publishing audit report
- 01:10 PM Bug #13925 (Resolved): 404 File or directory not found occurred if checklists has not filled and directly submitted to auditee with "No NC" audit status
- 01:08 PM Bug #13961 (Resolved): Duplicate NC is displayed in NC Details Page.
- 01:08 PM Bug #13881 (Resolved): Both the Validation alerts are displaying at same time when LPA schedule is created
- 01:08 PM Bug #14018 (Resolved): Audit program->Need validation for while selecting the clause as mandatory it should allow to save without selection the clause
- 01:07 PM Bug #14000 (Resolved): Entity name need to display in process fields as per requirement
- It should be process in the discussion which i was in. Based on your discussion with bijoy i changed to entity name.
- 01:03 PM Bug #13998 (Resolved): Need print option in View report page.
- Need To be under Discussion
- 01:01 PM Bug #13809 (Resolved): No segment 1&2,3,4 audit program by default in supplier portal.Audit program,audit type's of audit pro module should not be listing in supplier portal menu(audit program/audit type)
- Audit Type Need Not be Module Specific. Check with bijoy.
- 10:45 AM Bug #14006 (Resolved): While changing templates in audit program should not reflect in closed out & ongoing audits but it change in ready to perform audit.
09/27/2019
- 06:43 PM Bug #13971 (Resolved): Based on NC Category it need to displayed in publish document
- As Discussed im rejecting this issue
- 02:24 PM Bug #13971 (Not Fixed with Hotfix): Based on NC Category it need to displayed in publish document
- Still the issue occur
- 06:30 PM Bug #14110: While Selecting the drop down list system display only the "Conditional" option
- Not a bug .Closing this issue
- 06:25 PM Bug #13894 (Resolved): Equipment Import -> Unable to import equipments. Getting empty alert message and blank tree
- 05:54 PM Bug #14013 (Resolved): Response date extension and action owner change request is not displaying to respective auditors
- 02:31 PM Bug #14013 (Not Resolved): Response date extension and action owner change request is not displaying to respective auditors
- displays action in action management but when clicked on the hyperlink displays server error
- 05:32 PM Bug #13950 (Resolved): LPA category after delete displays Blank page
- 12:46 PM Bug #13950 (Not Resolved): LPA category after delete displays Blank page
- Issue verified in SP915
- 05:32 PM Bug #11417 (Resolved): LPA While Uploading Manual NC/OFI Category is not displaying in the drop down
- 02:45 PM Bug #11417 (Not Resolved): LPA While Uploading Manual NC/OFI Category is not displaying in the drop down
- Verified in SP915
- 05:29 PM Bug #13967 (Resolved): Non conformity filed entered description is not displaying fully in audit report publish
- Kindly check my screen shot with mazhar khans screenshot
- 12:57 PM Bug #13967 (Not Resolved): Non conformity filed entered description is not displaying fully in audit report publish
- Issue verified in 915
- 05:25 PM Bug #13981 (Resolved): when clicked on Reset button from LPA category screen displays breadcrumb and Audit program data from audit pro
- 02:40 PM Bug #13981 (Not Resolved): when clicked on Reset button from LPA category screen displays breadcrumb and Audit program data from audit pro
- Still issue exists
- 05:25 PM Bug #13995 (Resolved): When customer report viewed from Audit status screen of the particular audit program displays server error
- Cannot able to replicate
- 02:36 PM Bug #13995 (Not Resolved): When customer report viewed from Audit status screen of the particular audit program displays server error
- Issue verified in SP915
- 05:17 PM Bug #13817 (Fixed with Hotfix): Auditpro Checklist -> List Score > N/A Value is not getting displayed in Status field
- 05:15 PM Bug #13817 (Resolved): Auditpro Checklist -> List Score > N/A Value is not getting displayed in Status field
- Please refer screen shot
- 12:19 PM Bug #13817 (Not Resolved): Auditpro Checklist -> List Score > N/A Value is not getting displayed in Status field
- issue verified in 915
- 05:13 PM Bug #13805 (Fixed with Hotfix): Business Rules->"NC/OFI Emails to all Auditor" option is available for Auditpro
- 05:12 PM Bug #13805 (Resolved): Business Rules->"NC/OFI Emails to all Auditor" option is available for Auditpro
- Already Screen shot suggest that issue is resolved. kindly check with pathan
- 12:16 PM Bug #13805 (Not Fixed with Hotfix): Business Rules->"NC/OFI Emails to all Auditor" option is available for Auditpro
- Issue verified in 915 build
- 05:05 PM Bug #13998: Need print option in View report page.
- Need to Close this bug until it is developed
- 04:57 PM Bug #13998: Need print option in View report page.
- Discuss with bijoy
- 05:03 PM Bug #14018 (In Progress): Audit program->Need validation for while selecting the clause as mandatory it should allow to save without selection the clause
- Not an Issue.
- 12:21 PM Bug #14018 (Not Fixed with Hotfix): Audit program->Need validation for while selecting the clause as mandatory it should allow to save without selection the clause
- Based on the own clause, We need to move further
- 04:57 PM Bug #13999 (Fixed with Hotfix): Audit status is not displayed after publishing.It can be text or color.If color it is Better
- Verified in 915
- 04:51 PM Bug #14002 (Closed): Both documents does not match, While clicking the " Click the view report "
- 04:43 PM Bug #14002 (Fixed with Hotfix): Both documents does not match, While clicking the " Click the view report "
- this issue occurs continue changed the template. We have blocked change the template in audit program
- 04:47 PM Bug #14003: Nc details & System improvement tab is missing, while clicking from the auditee response page
- Need to discuss with Bijoy
- 04:45 PM Bug #14006: While changing templates in audit program should not reflect in closed out & ongoing audits but it change in ready to perform audit.
- need to discuss with bijoy
- 04:26 PM Bug #13865 (Resolved): Supplier -> Address -> Unable to add deleted address again.
- 04:26 PM Bug #13813 (Resolved): Audit validity Report->Alignment issue.please refer screen shot
- 03:57 PM Bug #14147 (Closed): P-diagram: When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple duplicate functions and failures in the master table
- When adding function and failure in p-diagram by checking the box in error state & Responds table. It create multiple...
- 03:46 PM Bug #14145 (Closed): Equipment: without entering the text value in Asset Number and tries to save the Equipment master details, it should display the alert message
- Issue 1: Equipment: without entering the text value in Asset Number and tries to save the Equipment master details, i...
- 03:41 PM Bug #14144 (Closed): P-Diagram: Cannot give select option in control factors branch at control factor table
- P-Diagram: Cannot give select option in control factors branch at control factor table
Refer Screenshot - 03:33 PM Unit Level and Cosmetic Issues #13864 (Fixed with Hotfix): Supplier -> Spell mistake in various pages / Content change in alert message
- Verified
- 03:18 PM Unit Level and Cosmetic Issues #14142 (Suggestion): PM Supervisor Calendar: Need to display the user selection icon for Admin and Supervisor planned maintenance details screen
- PM Supervisor Calendar: Need to display the user selection icon for Admin and Supervisor planned maintenance details ...
- 03:10 PM Bug #13821 (Fixed with Hotfix): Supplier -> Edit is not working in all fields
- Verified
- 03:09 PM Bug #14141 (Closed): When clicking insert in control factor it create branch in responds table
- When clicking insert in control factor it create branch in responds table
while clicking insert in one table the b... - 03:04 PM Unit Level and Cosmetic Issues #13866 (Not Resolved): Supplier -> Contact(s) -> Search criteria's has to be change for Position and Status
- begin with , End with are not need in status
- 03:01 PM Bug #14021 (Not Resolved): Equipment -> Checklist Tab -> The admin could edit check points once it is created. But edited information are not getting displayed while retrieving the page
- Verified in SP915
- 02:59 PM Bug #14140 (Closed): PM Supervisor calendar: The selected activity is not getting displayed in the planned maintenance Activity field
- PM Supervisor calendar: The selected activity is not getting displayed in the planned maintenance Activity field
- 02:43 PM Bug #13977 (Fixed with Hotfix): After submitting Audit report using customer template with all the marked fields in screen shot are filled and retrieved displays blank
- issue verified in SP915
- 02:42 PM Bug #13976 (Not Fixed with Hotfix): Audit report publish alert message is not displaying when clicked on submit
- Still the issue occur
- 02:41 PM Bug #14139 (Closed): PM Calendar: Planned Maintenance list-->The assigned user name details is not showing in the Activity's user list pop up window
- PM Calendar: Planned Maintenance list-->The assigned user name details is not showing in the Activity's user list pop...
- 02:40 PM Bug #13983 (Fixed with Hotfix): When clicked on response date extension displays error
- Verified in SP915
- 02:35 PM Bug #14015 (Fixed with Hotfix): Audit Program List -> LPA Program name should not be displayed in listing page
- Verified
- 02:34 PM Bug #14001 (Fixed with Hotfix): Map entity ->Show all audit programs when clicked navigation buttons displays in large size
- Verified on SP915
- 02:33 PM Bug #14007 (Fixed with Hotfix): When clicked on Existing Audit program displays sever error
- Verified in SP915
- 02:32 PM Bug #14138 (Closed): EFC Tree: When selecting EFC tree diagram the parent PI itself displaying as child for the same Element
- When selecting EFC tree diagram the parent PI itself displaying as child for the same Element
Refer Screenshot - 02:32 PM Bug #14008 (Fixed with Hotfix): Creating a New Audit program is not getting saved and displays some other data of some other audit programs
- verified and closed in Sp915
- 02:29 PM Bug #14137 (Closed): PM Supervisor Calendar: The system should not display default selection as days in Activity duration description
- PM Supervisor Calendar: The system should not display default selection as days in Activity duration description.
... - 02:10 PM Bug #13997 (Fixed with Hotfix): While hovering icon is hidden in checklist page
- Verified
- 02:08 PM Bug #14136 (Closed): While clicking OK button from EFC tree flow down indicator the page got hanged
- While clicking OK button from EFC tree flow down indicator the page got hanged and does not move further
- 02:06 PM Bug #14000 (Not Fixed with Hotfix): Entity name need to display in process fields as per requirement
- 02:05 PM Bug #14000 (Fixed with Hotfix): Entity name need to display in process fields as per requirement
- Entity name need to display, check with bijoy
- 01:55 PM Bug #14135 (Closed): EFC Tree: While opening EFC tree it contains large space at bottom of the page
- While opening EFC tree it contains large space at bottom of the page
Refer Screenshot - 01:12 PM Bug #14132 (Closed): Failure Tree: Same child element is displayed for different parent in Failure tree
- Same child element is displayed for different parent element in Failure tree
Failure tree diagram has to displaye... - 01:06 PM Bug #14017 (Fixed with Hotfix): Perform Audit-> Primary & secondary contact person only need to display in Auditee field in cummins report . Current its display the global process owner.
- Verified
- 12:57 PM Bug #14129 (Closed): PM Supervisor and Die PM Supervisor Calendar: The status of planned maintenance should display the status which is showing in the calendar
- PM Supervisor and Die PM Supervisor Calendar: The status of planned maintenance should display the status which is s...
- 12:54 PM Bug #14128 (Closed): While clicking on requirement tree is not opened.
- Requirement Tree is not opened and system displays with no data
PI: Airbag - 12:52 PM Bug #13996 (Closed): Checklist is not working, We are not able select yes or no.Text is displayed mutiple times.
- 12:48 PM Bug #13965 (Fixed with Hotfix): Assign audit type and form window when closed after assigning form displays alert as "It looks like you have been editing something. If you leave before saving, your changes will be lost."
- Issue verified in SP915
- 12:42 PM Bug #13949 (Fixed with Hotfix): Perform Audit->Upload Audit record when clicked displays alert as "Please set Doc Pro Level in Business Rule" though level is selected in BR
- Issue verified in SP915 not replicated
- 12:41 PM Bug #13891: Perform audit -> Upload OFI -> Clause field should not be mandatory. The field should be optional
- Issue verified in SP 915
- 12:40 PM Bug #14014 (Fixed with Hotfix): Once its publish successfully message is not displayed in month view page.
- Verified
- 12:38 PM Bug #13885 (Fixed with Hotfix): Not able to save the Template from the schedule which is already created
- Issue verified in SP915
- 12:36 PM Bug #13879 (Fixed with Hotfix): Auditor(s) are not displaying in Layer screen when tried to map auditor for a layer
- Issue verified in SP915
- 12:34 PM Bug #13877 (Fixed with Hotfix): Labels not Converted in Frequency drop down of audit mode
- Issue verified in SP915
- 12:31 PM Bug #13860: LPA Schedule ->Duplicate checklist is displayed
- Issue verified in SP915
- 12:29 PM Bug #13853 (Fixed with Hotfix): LPA Audit Schedule Logic -> The schedule is not created for all the months for an equipment
- Issue verified in SP 915
- 12:27 PM Unit Level and Cosmetic Issues #13845: Templates --> Planned audit and actual audit button is displayed for existing records
- Issue verified in Sp915
- 12:25 PM Unit Level and Cosmetic Issues #13844: Templates -> Existing and New Template -> Label missing for supplier plant address and supplier part
- Issue verified in 915
- 12:23 PM Bug #13842: Templates -> Existing and New Template -> Default elements are missing under "Available elements"
- issue verified in 915
- 12:21 PM Bug #13839: All Actions -> Actions page is not working. The action list is showing "Loading" only
- issue verified in 915
- 12:13 PM Bug #14019 (Fixed with Hotfix): Without entering the clause it should allow me to move further based on the option "NC clause mandatory" option
- 12:13 PM Bug #14019: Without entering the clause it should allow me to move further based on the option "NC clause mandatory" option
- Verified :
With the help of Standard
With the help of Own Clauses - 12:05 PM Bug #14119 (Closed): Deselect the option is not working for Clause in Nc/OFI page
- Deselect option is not working for Clause in Nc/OFI page
09/26/2019
- 06:27 PM Bug #14116 (Closed): Design VDA - Failure Analysis - For a Failure Flowdown without Requirement system displays Parent Element in the same level of Child element
- For a Failure Flowdown without Requirement system displays Parent Element in the same level of Child element
- 05:23 PM Bug #14115 (Closed): Design VDA - Structure Analysis - System allows to Copy an element and Drop on another element in the Same Level. Following Issues occurs while doing the above operation.
- 1. Focus element name is changed as Dragged element name.
2. System allows to Copy and Paste on same element - 04:44 PM Bug #14113 (Closed): Design VDA - Structure Analysis - While Drag and Drop any element and clicking Cancel icon, system automatically Moves the element on the Dropped element
- While Drag and Drop any element and clicking Cancel icon, system automatically Moves the element on the Dropped element
- 02:52 PM Bug #14110 (Closed): While Selecting the drop down list system display only the "Conditional" option
- 12:58 PM Bug #14108 (Closed): Design VDA - Structure Analysis - Pagination is not working while Expand/Collapse from Double click and Arrow
- Pagination is not Changing while Expand/Collapse from Double click and Arrow
- 12:55 PM Bug #14107 (Closed): While doing flow down from Failure tree the system throws Timeout Error
- While doing flow down from Failure tree the system throws Timeout Error
Issue occurred even After Pool size has be... - 12:37 PM Bug #14105 (Closed): Design VDA - Structure Analysis - By Default system displays wrong count in 'From Component Level'
- By Default system displays wrong count in 'From Component Level'
- 11:50 AM Bug #14102 (Closed): Design VDA - Structure Analysis - Level marker remains same for all the Levels even after Expand/Collapse is done. (Refer Description)
- Level is not changing even after Expand/Collapse is done through Pagination.
- 10:56 AM Bug #13987 (Resolved): In 8D-HW form, in D0 clicking below Action label shows the following error.
09/25/2019
- 03:48 PM Bug #14095 (Open): While expanding concern number definition tab in Business Rule shows "Sorry an error occurred while processing your request" error message
- While expanding concern number definition tab in Business Rule shows "Sorry an error occurred while processing your r...
- 03:19 PM Bug #14093 (Open): In Pit closeout, concern Details area all the fields are displayed as editable
- In Pit closeout, concern Details area all the fields are displayed as editable
- 03:19 PM Bug #14092 (Closed): Production OEE: When a user tries to Edit the Parts production record, the setup dropdown field displays as Empty field.
- Production OEE: When a user tries to Edit the Parts production record, the setup dropdown field displays as Empty fie...
- 03:19 PM Bug #14091 (Open): In 5Whys form the # field is editable.
- In 5Whys form the # field is editable.
- 03:18 PM Bug #14090 (Open): In 5Whys form, all the fields in Concerns are able to edit.
- In 5Whys form, all the fields in Concerns are able to edit.
- 03:17 PM Bug #14089 (Open): In P-Map and Control Plan while loading for the first time the border are not displaying properly. While its border are not loaded, it allowd the user to edit the contents.
- In P-Map and Control Plan while loading for the first time the border are not displaying properly. While its border a...
- 03:16 PM Bug #14088 (Open): In T-Map for the first time Add, Delete, Exclude are not displaying in Right clicck option.
- In T-Map for the first time Add, Delete, Exclude are not displaying in Right clicck option.
- 03:16 PM Bug #14087 (Open): In T-Map there is no consistency in displaying the default data in the form.
- In T-Map there is no consistency in displaying the default data in the form.
- 03:15 PM Bug #14086 (Open): In D2, % of parts affected field calculation is wrong.
- In D2, % of parts affected field calculation is wrong.
- 03:15 PM Bug #14085 (Open): In D1, email id field shows as Editable.
- In D1, email id field shows as Editable.
- 03:14 PM Bug #14084 (Open): Clicking on the Date and Action description under Emergency Response Actions, Shows "Object reference not set to an instance of an Object".
- Clicking on the Date and Action description under Emergency Response Actions, Shows "Object reference not set to an i...
- 03:14 PM Bug #14083 (Open): In D0 Part number is displayed as editable, if user tires to edit shows alert as editing is not allowed for this property.
- In D0 Part number is displayed as editable, if user tires to edit shows alert as editing is not allowed for this prop...
- 03:13 PM Bug #14082 (Open): Progress Tracker in 8D-HW form is not working, Status area shows error and closure date also no getting fetched.
- Progress Tracker in 8D-HW form is not working, Status area shows error and closure date also no getting fetched.
- 03:13 PM Bug #14081 (Open): Supplier element is editable in 8d-HW form summary and in D2.
- Supplier element is editable in 8d-HW form summary and in D2.
- 03:12 PM Bug #14080 (Open): Control plan taking more time to get loaded.
- Control plan taking more time to get loaded.
- 03:12 PM Bug #14079 (Open): In Possible cause, cant able to do data entry.
- In Possible cause, cant able to do data entry.
- 03:11 PM Bug #14078 (Open): In concern numbering, along with entity short name some junk data are displaying.
- In concern numbering, along with entity short name some junk data are displaying.
- 03:01 PM Bug #14077 (Closed): Production OEE: When booking the Production OEE for Assembly Line, it should not display the assembly line selection field as "Equipment Name/Equipment Code"
- Production OEE: When booking the Production OEE for Assembly Line, it should not display the assembly line selection ...
- 02:04 PM Bug #14072 (Closed): Equipment Part - Die Linkage: When a user tries to delete the part which is linked with die details and select the same part. The system is showing the existing selected die details for same selected part
- Equipment Part - Die Linkage: When a user tries to delete the part which is linked with die details and select the sa...
- 12:59 PM Bug #14005 (Closed): In Initiate Problem solving phase, the supplier field is not showing any data, even though supplier is selected in the Concern initial Evaluation phase.
- 12:58 PM Bug #13992 (Closed): In Concern No definition the defining part need to be displayed below
- 12:57 PM Bug #13991 (Closed): In D3, the start date and finish date functionality is not proper.
- 12:57 PM Bug #13990 (Closed): In D3, While trying to add part Description shows following error message.
- 12:56 PM Bug #13989 (Closed): In D3, While trying to add part number shows following error message.
- 12:56 PM Bug #13988 (Closed): In 8D-HW form, in D2 while entering % of parts affected shows following error message.
- That field has changed as auto populate
- 12:55 PM Bug #13986 (Closed): In 8D-HW form, Problem Reported Date is non editable and not fetching from Concern.
- 12:54 PM Bug #13985 (Closed): In 8D-HW form, Date Opened field Is showing Empty.
- 10:32 AM Bug #14065 (Closed): Checklist Score - Setup -> Checkpoint score is not applicable for LPA audits
- checkpoint score to which color code is assigned the same color code is not applicable for LPA audits
09/24/2019
- 04:28 PM Bug #14064 (Closed): Equipment Part - Die Linkage: When a user tries to delete the part for assembly line, it should get delete from the Equipment which is created under the assembly line
- Equipment Part - Die Linkage: When a user tries to delete the part for assembly line, it should get delete from the E...
- 02:42 PM Bug #14022 (Fixed with Hotfix): Define Audit Program -> Label displaying as "THLNCClauseMandatory"
- 01:13 PM Bug #14062 (Closed): Checklist Score - Fill Checklist-> Color code need to be revert back to no color when selected to "Select" from the drop down
- Checklist Score - Fill Checklist-> Color code need to be revert back to no color when selected to "Select" from the d...
- 12:55 PM Bug #14061 (Closed): Checklist Score - Setup->System is not allowing to change the color code assigned to a checkpoint once after saved.
- Checklist Score - Setup->System is not allowing to change the color code score assigned to a checkpoint once after sa...
- 12:43 PM Bug #14060 (Closed): Checklist Score - Setup ->System is not allowing to create new section or sub section under compliance
- Checklist Score - Setup ->System is not allowing to create new section or sub section under compliance but when click...
- 12:40 PM Bug #14059 (Closed): Checklist Score - Setup ->Color code selection popup is not displaying for newly created checkpoint
- Checklist Score - Setup ->Color code selection popup is not displaying for newly created checkpoint but where as it d...
- 12:32 PM Bug #14058 (Closed): Checklist Score - Setup- N/A value is not displaying for checkpoint after save and retrieve
- Checklist Score - Setup- N/A value is not displaying for checkpoint after save and retrieve but when assigned new sco...
- 11:24 AM Bug #14048 (Closed): Equipment Part - Die Linkage: Die Name--> When a user tries to select the multiple die name and unselect few from the list. It is not working as expected.
- Equipment Part - Die Linkage: Die Name--> When a user tries to select the multiple die name and unselect few from the...
- 11:15 AM Bug #14047 (Closed): Equipment Part Linkage: Not able to map the parts for the selected assembly line.
- Equipment Part Linkage: Not able to map the parts for the selected assembly line.
09/23/2019
- 05:59 PM Bug #14045 (Closed): Trade --> When clicking on Trade menu, it displays blank screen with loading comment. Due to this issue not able to create the spare part master. (So imported the spare part and proceeded further)
- Trade --> When clicking on Trade menu, it displays blank screen with loading comment. Due to this issue not able to c...
- 03:48 PM Bug #14044 (Closed): Die Import--> Need Imported Manufacturer selection details in Die Import option
- Die Import--> Need Imported Manufacturer selection details in Die Import option
- 03:47 PM Bug #14043 (Closed): Die --> No need separate label for Imported Manufacturer checkbox. While placing the cursor in checkbox, the system should display the tooltip as Imported Manufacturer
- Issue 1: Die -- No need separate label for Imported Manufacturer checkbox. While placing the cursor in checkbox, the ...
- 03:45 PM Unit Level and Cosmetic Issues #14042 (Closed): Die --> Imported Manufacture label should be renamed to Imported Manufacturer
- Die --> Imported Manufacture label should be renamed to Imported Manufacturer
- 02:38 PM Bug #13996 (Resolved): Checklist is not working, We are not able select yes or no.Text is displayed mutiple times.
- Not an Issue.
In Checklist creation page both name and description field are given as same data - 02:27 PM Bug #13880 (Fixed with Hotfix): Unable to create actual audit after confirmed the status still its in tentative status
- Verified
Impact : Verified after adding shift - 02:20 PM Bug #13881 (In Progress): Both the Validation alerts are displaying at same time when LPA schedule is created
- 12:57 PM Bug #13868 (Not Fixed with Hotfix): Supplier -> Import Format -> Import format excel sheet should display only format. Its should not show any data on any field and sheet
- Still the issue occur.
- 12:46 PM Unit Level and Cosmetic Issues #13832 (Fixed with Hotfix): Supplier -> Alert message content has to change. The content "UserName Already Exists" should be renamed as "Username Already Exists"
- 12:45 PM Unit Level and Cosmetic Issues #13832: Supplier -> Alert message content has to change. The content "UserName Already Exists" should be renamed as "Username Already Exists"
- Impact: No Impact
- 11:08 AM Bug #13924 (Fixed with Hotfix): Unable to do perform audit (VAM) -> No checklists showing in fill checklists page, which is a shows topper for VAM assessment.
- Working fine
Also available in: Atom