Activity
From 11/06/2019 to 12/05/2019
12/02/2019
- 05:53 PM Bug #14806 (Closed): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- 05:31 PM Bug #14806 (Not Resolved): Manufacturing report: ->Auditor/Auditee need to displayed based on selection in Actual audit. Secondary contact person need to displayed in Auditee name field.Score value is not displayed after fill the checklist
- Changed the status to not fixed after confirming from meena
- 05:15 PM Bug #14742 (Closed): NXP->Auditee Response: Not able to enter the data in Root cause description fields
- 05:13 PM Bug #14701 (Closed): Auditee Response: Delete option need to remove in Evidence column
- Issue verified in SP_920 and closed
- 05:07 PM Bug #14461 (Closed): Assign Checklist-> Max and min button need to displayed in assign checklist page
- issue verified in SP_920 and closed
- 05:04 PM Bug #14448 (Closed): Checklist page-> Minus value are displayed in Score value text box box
- issue verified in SP_920 and closed
- 05:03 PM Bug #14292 (Closed): Perform Audit: Keep the Upload NC/OFI(0) as Expand to Show the Upload NC/ Upload OFI Button Visible.
- 04:59 PM Bug #14761 (Closed): LPA/Audit pro : Effectiveness Status is displaying Deadline violated though Due date is available System displays as Deadline violated for NC/OFI for which Category is created
- issue fixed in SP_920
- 04:54 PM Bug #14815 (Closed): Audito/Auditee:Holiday should count during calculate the response target date,closed out and effectiveness
- 02:29 PM Bug #14846 (Closed): Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- 02:28 PM Bug #14699 (Closed): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 11:40 AM Bug #14826 (Closed): Multi site not listing in the dropdown for APQP
- Closed the issue
11/29/2019
- 11:56 AM Bug #14628 (Closed): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- Closed in Cycle 4
- 11:15 AM Bug #14628 (Not Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 11:15 AM Bug #14628: Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- • Assign Severity rating is not displayed for Direct Effect.
- 11:27 AM Bug #14843 (Closed): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- Closed in SP920 Cycle 4
- 11:26 AM Bug #14827 (Closed): EFC Tree: While Publishing EFC tree only the parent PI is displayed on published Document.only after refresh and republish it display the full diagram
- 11:24 AM Bug #14576 (Closed): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- Closed in SP920 Cycle 4
- 11:21 AM Bug #14579 (Closed): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- Closed in SP920 Cycle 4
- 11:19 AM Bug #14585 (Closed): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- Closed in SP920 cycle 4
- 11:18 AM Bug #14623 (Closed): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- Closed in SP920 Cycle 4.
Requirement Tree/Failure Tree/EFC Tree options are removed in both Functional/Failure Ana... - 11:13 AM Bug #14726 (Closed): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- Closed in SP920 Cycle 4
- 11:11 AM Bug #14841 (Closed): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- Closed in SP920 Cycle 4
11/27/2019
11/25/2019
- 04:54 PM Bug #14628 (Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 03:32 PM Bug #14628 (Not Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
- 03:51 PM Bug #14726 (Fixed with Hotfix): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- 03:27 PM Bug #14726: Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- Edit Effect page is still not same as Design VDA
- 03:49 PM Bug #14320 (Fixed with Hotfix): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
- 03:47 PM Bug #14576 (Fixed with Hotfix): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 02:24 PM Bug #14576 (Resolved): Process VDA - Design and Process VDA- Assigned Severity rating must be displayed while clicking on the Assign/Add Severity Rating option.
- 03:40 PM Bug #14579 (Fixed with Hotfix): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 03:38 PM Bug #14585 (Fixed with Hotfix): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 03:36 PM Bug #14603 (Closed): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- Closed in SP920 Cycle 2
- 03:34 PM Bug #14623 (Not Resolved): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 10:05 AM Bug #14318 (Closed): While opening the inspection sheet from Supervisor approval menu,Hourly reminder email is getting triggered
- Closed in SP920
- 10:05 AM Bug #14318 (Fixed with Hotfix): While opening the inspection sheet from Supervisor approval menu,Hourly reminder email is getting triggered
- 10:04 AM Bug #14219 (Closed): Production Inprocess & Dept Worksheet : After clicking search on Operations/Equipments pop-up respective images are getting changed
- Closed in SP920
- 10:04 AM Bug #14219 (Fixed with Hotfix): Production Inprocess & Dept Worksheet : After clicking search on Operations/Equipments pop-up respective images are getting changed
- 10:04 AM Bug #14211 (Closed): If an Inspection is Inprogress its allowing to create a new schedule for Receiving Inspection but not allowing for Final Inspection.Need a common rule set for both the Inspections
- Closed in SP920
- 10:04 AM Bug #14211 (Fixed with Hotfix): If an Inspection is Inprogress its allowing to create a new schedule for Receiving Inspection but not allowing for Final Inspection.Need a common rule set for both the Inspections
- 10:03 AM Bug #14209 (Closed): Inspection form Standard : Search by Notification interval not working
- Closed in SP920
- 10:03 AM Bug #14209 (Fixed with Hotfix): Inspection form Standard : Search by Notification interval not working
11/22/2019
- 12:36 PM Bug #14579 (Resolved): Design VDA - Functional and Failure Analysis - Unable to select any option from context menu when the diagram is too low.(Refer Description)
- 12:36 PM Bug #14623 (Resolved): Design VDA - Functional/Failure Analysis - Requirement Tree/Failure Tree/EFC Tree options are not removed in Failure Tree
- 12:35 PM Bug #14628 (Resolved): Design VDA - Functional/Failure Analysis - Context menus for Effect/Failure/Cause must be categorised. (Refer Description)
11/21/2019
- 06:38 PM Bug #14603 (Resolved): Design VDA - Structure Analysis - After collapsing and Expanding the Subsystem element, the context menu is opening at random areas
- 01:12 PM Bug #14726 (Resolved): Process VDA - Functional Analysis - Edit Effect option is listed in Functional Analysis Context menu
- 01:10 PM Bug #14585 (Resolved): Design and Process VDA - Context menu is hiding at the bottom of the page in Following Pages.
- 01:09 PM Bug #14320 (Resolved): Design and Process VDA - Structure Analysis - While scrolling the page, context menu is not scrolling along with the element. (Refer Description also)
11/13/2019
- 06:40 PM Bug #14870 (Closed): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
- closed in Cy 9
- 02:54 PM Bug #14870 (Resolved): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
11/12/2019
- 06:13 PM Bug #14872 (Closed): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- 06:13 PM Bug #14872 (Fixed with Hotfix): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- not replicated
- 05:42 PM Bug #14872 (Open): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- 01:04 PM Bug #14872 (Closed): PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloaded even though the PDF preference is enabled.
- PDF Preference - When trying to view the Documents which is published in the Parent level the file is getting downloa...
- 05:42 PM Bug #14870 (Open): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
- 11:54 AM Bug #14870 (Closed): PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflected in the documents when viewed from TOC
- PDF Templates:The entered data fields are not saved while reteriving. Due to that the document details are not reflec...
- 05:28 PM Bug #14860 (Closed): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- 11:48 AM Bug #14860 (Resolved): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- 11:39 AM Bug #14860 (Open): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- 05:28 PM Bug #14837 (Closed): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- 05:27 PM Bug #14859 (Closed): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 11:48 AM Bug #14859 (Resolved): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 11:39 AM Bug #14859 (Open): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 03:49 PM Bug #14533 (Closed): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 12:32 PM Bug #14533 (Reopen): New document request: Alert message is showing to change the doc number and name even the folder doesn't have the document number and name
- 12:54 PM Bug #14750 (Not Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- Still Not able to attach docpro document in meetings by selecting revision document from custom /user defined folder(...
- 12:01 PM Bug #14655 (Resolved): Clicking on the attachments added in forms, shows 500 server error.
11/11/2019
- 06:14 PM Bug #14699 (Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 05:32 PM Bug #14852 (Resolved): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- 04:55 PM Bug #14841 (Fixed with Hotfix): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 11:04 AM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 12:59 PM Bug #14750 (Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- 11:44 AM Bug #14843 (Fixed with Hotfix): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 11:04 AM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 10:03 AM Bug #14837 (Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
11/07/2019
- 05:11 PM Bug #14846: Change Management : Not able to attach the document in the ECR form when batch process is enabled - Approval is set to the Docpro Level
- Published the ECR form - But document not yet converted
- 03:42 PM Bug #14750 (Not Resolved): Not able to attach docpro documents for meetings by selecting revision document from custom /user defined folder
- The selected document is not attached to the meeting attachments(attach from Docpro)
- 03:42 PM Bug #14816 (Closed): MR approval is not working after validation and verification completed
- Verified in SP_915 Cy-6 verified MR approval work flow
- 03:41 PM Bug #14828 (Closed): NC category:Irrelevant Nc category is display while raised NC .
- Verified in SP_915 Cy-6
- 03:40 PM Bug #14824 (Closed): EwQIMS : Home page Tree image displays (-) for some of the Modules when cursor is placed Over
- Verified in CY-6 and Closed
- 03:37 PM Bug #14699 (Not Resolved): When the document is drag and dropped or attached twice for the any change initiated document then it takes both the attachment for same revision number.
- 03:30 PM Bug #14841 (In Progress): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:17 PM Bug #14841 (Not Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 10:33 AM Bug #14841 (Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 03:29 PM Bug #14843 (In Progress): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 03:11 PM Bug #14843 (Not Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- Issue remains the same
- 10:47 AM Bug #14843 (Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 03:19 PM Bug #14856 (Closed): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 10:49 AM Bug #14856 (Resolved): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 10:48 AM Bug #14856 (Open): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- 03:03 PM Bug #14517 (Closed): "Please fill business rule settings" error alert is getting displayed for multi site/Corporate VAM audit though business rule has set
- Working fine
- 03:03 PM Bug #14831 (Closed): Supplier Management: Audit mode->Multi site->Audit mode data created in corporate/audit Pro module not listing,so while creating new mode exist in corporate and saving,"Record already exists" alert is displaying
- Working fine
- 03:03 PM Bug #14675 (Closed): ISSUE1:"Data not saved" error is getting displayed while attaching any evidences/attachments in all PS forms,but able to view the attached documents,ISSUE2: File name is separatng with + sign in all attachments
- Working fine
- 02:49 PM Bug #14860: Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- Please let me know the root cause to replicate the issue
- 02:46 PM Bug #14860 (Closed): Multi document upload: Shows error when trying to view the document from TOC(When uploading multiple documents twice for the same level with different file type order)
- Multi document upload: When uploading multiple docs twice, then when trying to open the latest uploaded document, sho...
- 01:09 PM Bug #14859 (Closed): Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- Pending Document draft - Clicking on Document number "500 - Internal server error" displays
- 12:35 PM Bug #14418 (Not Resolved): The existing parts added to a program via BOM import got listed again in the aqua tree( TBD)
- Still parts are listing twice after BOM Import. Refer screenshot(duplicate Part)
- 12:29 PM Bug #14480 (Closed): Dont display Supplier in any of the user selection part.
- 12:28 PM Bug #14658 (Closed): Supplier part number is not getting displayed in SCAR form.
- 10:38 AM Bug #14850 (Open): Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error alert is displaying
- Duplicate of #14852
- 10:36 AM Bug #14852 (Open): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- Fixed By sakthi murugan
11/06/2019
- 06:33 PM Bug #14312 (Closed): Design and Process VDA - Function/Failure Analysis - After opening the Percentage allocation and then Clicking on the Resize bar, system overrides the menu on the Header.
- 06:25 PM Bug #14591 (Closed): Design and Process VDA - Structure analysis and Block Diagram alignment is not good when creating more levels of elements
- 06:21 PM Bug #14833 (Closed): (Mozilla) Design VDA- Functional/Failure Analysis - Tooltip for Legend Icon is displayed in two different forms. Also Two Legends are displayed
- 06:14 PM Bug #14832 (Closed): Design VDA - Structure Analysis - Expand and Collapse is not working as Expected in following Scenario.(Refer Description)
- 06:13 PM Bug #14835 (Closed): Design VDA - Failure Analysis - After Editing the Effect in Tree view, Severity rating is removed. On refresh it is displayed again.
- 06:11 PM Bug #14841 (Not Resolved): Design VDA - Structure Analysis - Level number is not displayed according to the diagram displayed.(Refer Description)
- 06:06 PM Bug #14842 (Closed): Design VDA - Structure Analysis - While copying the Element that contains more than one child element, on same level element, diagram is displayed randomly
- Closed in SP915 Cycle 6
- 05:23 PM Bug #14670 (Closed): In All forms, while trying to attach an Evidence shows error "Data Cannot be saved"
- 05:23 PM Bug #14721 (Closed): In New concern and initial Evaluation, if the user adds any attachment in the concern and clicking on submit there is no response from the application.
- 05:16 PM Bug #14843 (Not Resolved): Design VDA -Structure Analysis - Alert message for wrong selection is wrong.
- 02:30 PM Bug #14810 (Closed): FSR: when clicking on Matrix Cell Value Icon the popup displays blank Branch with 0 values
- 02:21 PM Bug #14856 (Closed): Process VDA - Failure Analysis - Assign Severity Rating Popup window is not good.
- Popup size is too small where the list is not displayed properly
- 01:46 PM Bug #14852 (Closed): Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok button"Error" alert is getting displayed.pls refer screen shot
- Supplier Management:CAR forms->On clicking publish button and entering the reason and request details and clicking Ok...
- 01:14 PM Feature/Enhancement #14741: IE:User popup: when closing the popup before the page loads, throws JS error
- As per Bijoy Request this issue is moving to next Release
- 01:14 PM Feature/Enhancement #14385: User log->when session is expired system is not considering the logout time
- As per Bijoy request this issue is moving to next release
- 01:03 PM Bug #14539 (Closed): Interface Matrix: When adding connection line pattern values in block diagram, the allocated value is not reflected in the interface matrix
- 12:22 PM Bug #14850 (Fixed with Hotfix): Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error alert is displaying
- Supplier Management: CAR form->on clicking Publish button and specifying reason,request and click Ok button ,error al...
- 12:12 PM Bug #14805 (Closed): Search Option is not Working in VOC, Functional Analysis, Hazard and Risk Analysis and TSR
- 12:12 PM Bug #14687 (Closed): Block Diagram: Internal Element is displayed outside the scope in Block Diagram
- 12:11 PM Bug #14834 (Closed): Block Diagram: While Enable automate diagram is checked, the external element is also displayed in blue Color and also the internal element is displayed outside the scope
- 11:57 AM Bug #14837 (Not Resolved): New Document Request - Entering revision number with more digits the alert displays like " The Max length is : 3" instead the Alert can be - The Max length of revision number is 3
- Alert displaying - The Max length of revision number is 33
- 11:37 AM Bug #14737 (Closed): On entering the string 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung in Reason for change it displays in HTML tag.
- 11:32 AM Bug #14839 (Closed): Document - On viewing the Revision in the revision history summary for the Document with name 欢迎Welcomeเต้อนรับpowitalnybienvenidaBegrüßung "server error displays"
- 11:28 AM Bug #14845 (Closed): Suite->Level creation->An inappropriate alert is displayed when 'Synchronize site usage' check box is checked for a sub folder
- 11:26 AM Bug #14847 (Closed): TOC: Search by document number with prefix is not working
Also available in: Atom