SP 10.3.0

VEM->Perform audit->Part/Commodity->Displays special character issue when commodity contains & symbol

Reports->Audit score Report->RYG status Vs SCAR status->R showing 0,SCAR shows 1 NC.(Raised one NC)

Reports-If commodity contains & ampersend symbol (Eg;Labels & Stickers) the special character(&) shows as &.Pls refer sceen shot

1.Login as AQuA Pro Module Administrator

2.Click on AQuA Pro Tab and click on Main Menu

3.Right click on the Global PI and Select a Production Item

4.Click on the AIAG-VDA Design Menu. New window will open

5.Click on Process VDA tab and select structure Analysis

6.Observe the Scrollbars

1.Login into EwQIMS Application
2.Click on user
3. Create with user code "User-B"
4.Delete the created User B
5.Now, again create a user with code "User-B"
6.Alerts shows" Code Already exists" (User B is deleted)

1.Login as AQuA Pro Module Administrator

2.Click on AQuA Pro Tab and click on Main2 Menu

3.Set the Format as AIAG-VDA

4.Expand Global PI and Select PI (Ex: VDA Micron Changes)

5.Open Process Flow Document -> Double-Click on 4M Cell

6.Click on Outside the Cell

7.Observe the Result

In Routes page, clicking on custom route shows application error

1. Login to FST Module
2. Selct a production item
3. Click on the VOC button

Download import format not updated with new format

"You dont have access to production item instance" alert is displaying after importing the supplier/part.(data has imported successfully)

VAM Perform audit-Part name is not fully displayed

VEM audit-Selecting any of the CAR form "Error occurred while processing your request" is getting displayed.Which is a block for audit submission

1. Login as RFD admin
2. Select a PI
3. Select Item definition(Architectural block diagram)
4. Select Requirement flowdown option
5. Select any menus under it(VOC)
6. Observe the behavior

1. SB-200311269 | Update checklist score in parent – When updating score in the parent it is not updating the checkpoints
2. SB-200711982 | Getting prompt to select 'Doc Pro Level from Business Rules' when uploading Audit Records

1.Login as AQuA Pro Module Administrator

2.Click on AQuA Pro Tab and click on Main Menu

3.Right click on the Global PI and Select a Production Item

4.Click on the AIAG-VDA Design Menu. New window will open

5.Click on Process VDA tab and select Structure Analysis

6.Create a Segment, Operation and FourM

7.Create another operation and a FourM

8.Goto Functional/Failure Analysis and in LHS view right click on any Operation and Select Create and map option

9.Click on FourM and select the fourM which is created against the other Operation and drop it in FourM branch

1.Login as AQuA Pro Module Administrator

2.Click on AQuA Pro Tab and click on Main Menu

3.Right click on the Global PI and Select a Production Item

4.Click on the AIAG-VDA Design Menu. New window will open

5.Click on Process VDA tab and select Failure Analysis

6.Add Effect and Cause and observe the RHS view

6.

1.Login as AQuA Pro Module Administrator

2.Click on AQuA Pro Tab -> click on Main2 Menu

3.Expand Global -> Select a PI

4.Click on AIAG-VDA PFMEA/DFMEA under the Process/Design Documents

5.Click on Process VDA tab -> Click on Function/Failure Analysis

6.Select the Process Segment -> Click on Done Button

7.Observe the Result

1.Login as AQuA Pro Module Administrator

2.Click on AQuA Pro Tab and click on Main Menu

3.Right click on the Global PI and Select a Production Item

4.Click on the AIAG-VDA Design Menu. New window will open

5.Click on Process VDA tab and select Structure Analysis

6.Create an Operation Category, Operation, FourM Category and FourM

7.Refresh the page and observe the page

1) Login as admin
2) Click on Any of the menus
3) Leave the System idle for Some time
4) Click on Any of the menu displays Session expried page with Login credentials
5) Login with user name and password
6) Observe the page

1.Login as AQuA Pro Module Administrator

2.Click on AQuA Pro Tab and click on Main Menu

3.Right click on the Global PI and Select a Production Item

4.Click on the AIAG-VDA Design Menu. New window will open

5.Click on Process VDA tab and select Functional/Failure Analysis

6.Right click on the Operation on the Structure view(LHS) and select create and map

7.Select Add Cause

1.Login as AQuA Pro Module Administrator

2.Click on AQuA Pro Tab and click on Main2 Menu

3.Set the Format as AIAG-VDA

4.Expand Global PI and Select PI (Ex: Aircraft)

5.Open Process FMEA Document -> Select a Branch which was not mapped any PIF

6.Add Effect in the Effect Column

7.Observe the Result

In KPI, after mapping the spotfire reports, clicking on view options opens up blank page.

1) Login as admin
2) Click on entity menu
3) Enter Entity name
4) Click on Country selection and select India
5) Now in state field Enter State name manually and Hit enter
6) Observe

1) Login as admin
2) Click on Supplier
3) Create Supplier
4) Add part and Observe

1) Login as admin
2) Click on administrator settings
3) Click on First day of the week
4) Observe

1.Login as RFD module administrator

2.Click on Main and select any PI.

3.select DFMEA menu and observe the Vertical Scrollbar

1.Login as RFD module administrator

2.Click on Main and select any PI.

3.select Item Boundaries menu from Item Definitions menu

4.Double click on Element Types column

5.Add the Type and press enter key

1.Login as RFD module administrator

2.Click on Main and select any PI.

3.select Interface types from Item Definitions tab

4.Right click on existing type and Create a new Interface type

5.Now select Block Diagram and draw an interface line

6.Click on it and change the type to newly created type

7.Observe the type

1.Login as FST module administrator

2.Click on Main and select any PI.

3.select Impact Analysis menu from Item Definitions tab

4.attach any image and observe the attachment

5.Click on Submit button and Observe the attachment

While gng to the given link for " enabling standard approaches" shows error.

1.Login as AQuA Pro Module Administrator

2.Click on AQuA Pro Tab and click on Main Menu

3.Right click on the Global PI and Select a Production Item

4.Click on the AIAG-VDA Design Menu. New window will open

5.Click on Process VDA tab and select Functional Analysis

6.In LHS, Right click on operation and select Create and Map option

7.Select Create Process Item Function

8.Select a Process Item Function from the list and drop it on the Characteristics field in Diagrammatic view

9.Observe the result

10.In RHS Right click on Characteristics and select Create and Map option

11.Select Create Process Item Function

12.add the Process Item Function
and Select Failure Analysis

Draft Requests needing viewing: Shows the pending document drafts screen for the draft requester and screen is blank for draft reviewers