Project

General

Profile

Actions
Summary

Issues

Filters

Apply Clear

# Tracker Status Priority Subject Updated Author MODULES Build Cycle Assignee Project Target version Category Start date Due date Total estimated time Created Closed Steps To Reproduce Customer
22523 Bug Fixed with Hotfix Medium Multiple FTA Issues (Refer Attachment for more FTA issues) 07/28/2021 12:16 PM Shankar Narayanan FST Cycle 1 FMEDA - Functional safety - ISSUES 07/13/2021 07/13/2021 12:04 PM

Multiple FTA Issues

 Actions
22522 Bug Fixed with Hotfix Medium Multiple FMEDA Issues(Refer attachment for more issues) 07/28/2021 12:16 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/13/2021 07/13/2021 12:00 PM

Multiple FMEDA Issues

 Actions
22494 Bug Fixed in Dev Medium Issue 15 – Default PI When Opening a Document/Diagram 07/29/2022 01:25 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 05:17 PM

1. Always open the most used PI.
2. Select a specific PI to always go to.
3. Don’t open any PI. After displaying a blank document or diagram, the user must then select a PI from left (Production Item) menu.

 Actions
22493 Bug Fixed with Hotfix Medium Issue 14 – Creating DFunc in TSR not Creating Flowdown 07/29/2021 06:34 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:43 PM

Open TSR for FMEDA-FTA Car:
Select DFunc3 under FMEDA-FTA Comp1 in TSR:

 Actions
22492 Bug Fixed with Hotfix Medium Issue 13 – FTA Creating Too Many Gate Type ATIs Created 07/28/2021 12:16 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:42 PM

After changing an OR Gate to an AND Gate:

 Actions
22491 Bug Resolved Medium Issue 12 – FTree Not Showing Failure Flowdowns 07/29/2021 06:12 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:40 PM

• Create DFunc, DReqt and DFail flowdowns in AQuAPro for FMEDA-FTA Carb.
• Open FTree, don’t see flowdown arrows:

 Actions
22490 Bug Resolved Medium Issue 11 – DFuncs Not Showing in RTree Dialog 07/29/2021 06:09 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:38 PM

• Selected and expanded FMEDA-FTA Carb Element in dialog below.
• Clicked +F to add DFuncs.
• In new dialog, added a couple DFuncs and selected them and clicked Ok.

 Actions
22489 Bug Fixed with Hotfix Medium Issue 10 – Multiple Numbering Schemes Getting Created 07/28/2021 12:16 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:37 PM

Multiple VOC Numbering Schemes are getting created in RTree for PatternType=1 (VOC). There should only be one NumScm PatternType for a given PI. I can’t tell exactly when they are created, but I was working in RTree, creating flowdowns to new component DFuncs and DReqts when they occurred.

Just opening RTree for a new PI that hasn’t been opened in it yet creates a NumScm.
Expanding a DReqt to see its flowdowns causes another NumScm to be created. In fact, refreshing the RTree and then expanding a DReqt causes another NumScm to be created for the same PI and DReqt.

 Actions
22487 Bug Fixed with Hotfix Medium Issue 8 – Redundant DReqtU.HARA ASIL and HARA SubASIL 07/28/2021 12:16 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:31 PM

• Open FSR
• Add DReqt in branch

 Actions
22486 Bug Fixed with Hotfix Medium Issue 7 – Global DSeg and Map Entry Incorrectly Created 07/28/2021 12:16 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:30 PM

• Open FSR
• DSeg created at Global level (Cxt=1079) that should NOT be created. This at least accounts for one of probably many places where this is occurring. Current DB I got from Biju had 48 of these Global DSegs, all included in Global’s Design Segment Map.

 Actions
22485 Bug Fixed in Dev Medium Issue 6 – Column Widths not Being Saved for HARA 07/29/2022 01:59 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:28 PM

• Open HARA
• Adjust Exposure column width to be wider:

 Actions
22484 Bug Fixed with Hotfix Medium Issue 5 – Malfunction Associated Then Deleted Then Re-Associated 07/28/2021 12:16 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:26 PM

Issue 5 – Malfunction Associated Then Deleted Then Re-Associated

 Actions
22483 Bug Resolved Medium Issue 4 – PI Description not Correct(Refer Attachment) 07/29/2021 06:03 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:24 PM

For example, in the table below, the three boxed items were selected from the dropdown and then changed, but the Description saved was still the original value I selected. Also, the Description field in the display is not updated, making it so the user doesn’t even know it’s being saved in the DB.

 Actions
22482 Bug Fixed with Hotfix Medium Issue 3 – Creating an Op Sit Branch in Table(Refer attachment) 07/28/2021 12:16 PM Shankar Narayanan FST Cycle 1 Reng Raj FMEDA - Functional safety - ISSUES 07/08/2021 07/08/2021 04:22 PM

• When an Op Sit branch is created in the Op Sit table, the correct PI contains Op Sit ASI is created (See first red box below), but why are five ATI records with blank values created for the Id, Comment, Speed, Location and Road Conditions properties (See second red box below)? This is causing extra time that is not needed.

 Actions
    (1-14/14)

    Also available in: Atom CSV PDF