Activity
From 10/16/2018 to 11/14/2018
11/14/2018
- 07:05 PM Bug #9720 (Open): Equipment -> Server error displayed when clicking on specific equipment (Bending M/C /BMC001)
- 11:06 AM Bug #9720 (Closed): Equipment -> Server error displayed when clicking on specific equipment (Bending M/C /BMC001)
- Equipment -> Server error displayed when clicking on specific equipment (Bending M/C /BMC001)
- 07:03 PM Bug #9745 (Open): When concern is opened in evaluation "Sorry, an error occurred while processing your request" is displayed ( refer steps & screenshot)
- 06:27 PM Bug #9745 (Closed): When concern is opened in evaluation "Sorry, an error occurred while processing your request" is displayed ( refer steps & screenshot)
- The issue occurs when submitting both for new cocnern and existing concern
- 07:03 PM Bug #9744 (Open): In NC filling screen after filling the mandatory fields when selected the NC category wrong date displays in "Auditee response due date" & "Auditee response revised due date"
- 06:22 PM Bug #9744 (Closed): In NC filling screen after filling the mandatory fields when selected the NC category wrong date displays in "Auditee response due date" & "Auditee response revised due date"
- In NC filling screen after filling the mandatory fields when selected the NC category wrong date displays in "Auditee...
- 07:03 PM Bug #9743 (Open): While uploading Findings for the First time for an audit after filling mandatory field displays "Data not saved"
- 06:18 PM Bug #9743 (Closed): While uploading Findings for the First time for an audit after filling mandatory field displays "Data not saved"
- While uploading Findings for the First time for an audit after filling mandatory field displays "Data not saved"
- 07:03 PM Bug #9742 (Open): Upload audit record after attaching document displays server error
- 06:13 PM Bug #9742 (Closed): Upload audit record after attaching document displays server error
- Upload audit record after attaching document displays server error as template
- 07:03 PM Bug #9740 (Open): Advanced search is not working for the first time. For the same user its working when searched again
- 05:58 PM Bug #9740 (Closed): Advanced search is not working for the first time. For the same user its working when searched again
- Advanced search is not working for the first time. For the same user its working when searched again
- 07:03 PM Bug #9739 (Open): Requests needing approval: Takes more time when the document is rejected. Takes time when the document is approved by the last approver
- 05:55 PM Bug #9739 (Closed): Requests needing approval: Takes more time when the document is rejected. Takes time when the document is approved by the last approver
- requests needing approval: Takes more time when the document is rejected. Takes time when the document is approved by...
- 07:03 PM Bug #9738 (Open): In Auditor Perform Audit page, Clicking on Re upload Extension shows error message.
- 05:52 PM Bug #9738 (Closed): In Auditor Perform Audit page, Clicking on Re upload Extension shows error message.
- In Auditor Perform Audit page, Clicking on Re upload Extension shows error message. Because of this cant able to chec...
- 07:03 PM Bug #9736 (Open): Regression : Project Review - Project end date displayed incorrectly comparing to the project schedule finish date.
- 05:42 PM Bug #9736 (Closed): Regression : Project Review - Project end date displayed incorrectly comparing to the project schedule finish date.
- 07:03 PM Bug #9734 (Open): Requests needing approval: Document details are not displayed(Common for all modules)
- 05:28 PM Bug #9734 (Closed): Requests needing approval: Document details are not displayed(Common for all modules)
- Requests needing approval: Document details are not displayed
- 07:03 PM Bug #9733 (Open): Gage: When clicking on show button in Calibration verification study for Existing Gage, it displays "Server Error".
- 05:28 PM Bug #9733 (Closed): Gage: When clicking on show button in Calibration verification study for Existing Gage, it displays "Server Error".
- Gage: HKG-AO1-001-> Select Calibration verification button through Existing Gage-->When clicking on Show button(Exist...
- 07:03 PM Bug #9732 (Open): Regression: When user is not having the reports rights then also the reports menu is displayed.
- 05:28 PM Bug #9732 (Closed): Regression: When user is not having the reports rights then also the reports menu is displayed.
- Regression:
1)When user is not having the reports rights then also the reports menu is displayed.
2)Supplier Tracki... - 07:03 PM Bug #9731 (Open): System is not allowing to add the assign audit type and forms from Local or from doc pro
- 12:59 PM Bug #9731 (Closed): System is not allowing to add the assign audit type and forms from Local or from doc pro
- System is not allowing to add the assign audit type and forms from Local or from doc pro when tried to attach the doc...
- 07:03 PM Bug #9730 (Open): In Corrective Action status page, While the user tries to view the Findings, clicking on NC hyperlink shows Server error.
- 12:39 PM Bug #9730 (Closed): In Corrective Action status page, While the user tries to view the Findings, clicking on NC hyperlink shows Server error.
- In Corrective Action status page, While the user tries to view the Findings, clicking on NC hyperlink shows Server er...
- 07:03 PM Bug #9729 (Open): Assign audit form when tried to edit the available form does not display the paths to attach the documents
- 12:38 PM Bug #9729 (Closed): Assign audit form when tried to edit the available form does not display the paths to attach the documents
- Assign audit form when tried to edit the available form does not display the paths to attach the documents
when cl... - 07:03 PM Bug #9728 (Open): Auditee cant able to view the Findings created by Auditor. Its keeps on loading
- 12:33 PM Bug #9728 (Closed): Auditee cant able to view the Findings created by Auditor. Its keeps on loading
- Auditee cant able to view the Findings created by Auditor. Its keeps on loading.
Note: Findings are available for ... - 07:03 PM Bug #9727 (Open): Consolidation : Clicking on the consolidation breadcrumb "Server Error" Displays.
- 12:18 PM Bug #9727 (Closed): Consolidation : Clicking on the consolidation breadcrumb "Server Error" Displays.
- Consolidation : Clicking on the consolidation breadcrumb "Server Error" Displays.
- 07:03 PM Bug #9726 (Open): Actual audit plan is not getting published in month view
- 12:13 PM Bug #9726 (Closed): Actual audit plan is not getting published in month view
- Actual audit plan is not getting published in month view for Existing record when created actual audit from the excit...
- 07:03 PM Bug #9725 (Open): Existing records Corrective actions -> Non Conformance tab is not loaded
- 11:14 AM Bug #9725 (Closed): Existing records Corrective actions -> Non Conformance tab is not loaded
- Existing records Corrective actions -> Non Conformance tab is not loaded. “Loading” only displayed
- 07:02 PM Bug #9724 (Open): Existing Records -> Closed Out Findings -> Selected approach is not getting displayed for closed out findings. The tab displayed the message as “Auditee not yet responded"
- 11:12 AM Bug #9724 (Closed): Existing Records -> Closed Out Findings -> Selected approach is not getting displayed for closed out findings. The tab displayed the message as “Auditee not yet responded"
- Existing Records -> Closed Out Findings -> Selected approach is not getting displayed for closed out findings. The ta...
- 07:02 PM Bug #9723 (Open): LPA -> Perform Audit -> Assigned checklist forms are not getting displayed for newly created schedules
- 11:11 AM Bug #9723 (Closed): LPA -> Perform Audit -> Assigned checklist forms are not getting displayed for newly created schedules
- LPA -> Perform Audit -> Assigned checklist forms are not getting displayed for newly created schedules
- 07:02 PM Bug #9721 (Open): Equipment Type -> Existing equipment’s / assembly line data’s are not displayed
- 11:08 AM Bug #9721 (Closed): Equipment Type -> Existing equipment’s / assembly line data’s are not displayed
- Equipment Type -> Existing equipment’s / assembly line data’s are not displayed
- 07:02 PM Bug #9719 (Open): Entity link - BOSS -> Entity tree list displaying is blank for the user chad.(Other user could see the list of entity)
- 11:04 AM Bug #9719 (Closed): Entity link - BOSS -> Entity tree list displaying is blank for the user chad.(Other user could see the list of entity)
- Entity link - BOSS -> Entity tree list displaying is blank for the user chad.(Other user could see the list of entity)
- 07:02 PM Bug #9718 (Open): Problem on viewing risk forms / context issue forms
- 11:03 AM Bug #9718 (Closed): Problem on viewing risk forms / context issue forms
- 1. Alignment Chart -> The assigned risk form is not displayed for a process. Error message displayed as "Data cannot ...
- 07:02 PM Bug #9717 (Open): Risk Template -> Default risk templates are not getting displayed. (Risk Form, Detailed Risk form and Risk and Opp)
- 11:01 AM Bug #9717 (Closed): Risk Template -> Default risk templates are not getting displayed. (Risk Form, Detailed Risk form and Risk and Opp)
- Risk Template -> Default risk templates are not getting displayed. (Risk Form, Detailed Risk form and Risk and Opp)
- 07:02 PM Bug #9716 (Open): Benchmark -> KPI Selection List -> The assigned KPI (Result KPI’s) is not displayed. But the same data displayed in Alignment chart
- 10:59 AM Bug #9716 (Closed): Benchmark -> KPI Selection List -> The assigned KPI (Result KPI’s) is not displayed. But the same data displayed in Alignment chart
- Benchmark -> KPI Selection List -> The assigned KPI (Result KPI’s) is not displayed. But the same data displayed in A...
- 07:02 PM Bug #9715 (Open): Equipment -> Criticality-->Equipment Critical Evaluation Each Content showing as “thrice”
- 10:53 AM Bug #9715 (Closed): Equipment -> Criticality-->Equipment Critical Evaluation Each Content showing as “thrice”
- Equipment -> Criticality-->Equipment Critical Evaluation Each Content showing as “thrice”
- 07:02 PM Bug #9714 (Open): BOM: While adding and Removing the element into the BOM, system is adding the same element again. It is displayed normal only on Reload.
- 10:53 AM Bug #9714 (Closed): BOM: While adding and Removing the element into the BOM, system is adding the same element again. It is displayed normal only on Reload.
- While adding and Removing the element into the BOM, system is adding the same element again. It is displayed normal o...
- 07:02 PM Bug #9713 (Open): Plant Configuration --> System not displays the Existing data in Manufacturing Line/Assembly Line and Equipment
- 10:53 AM Bug #9713 (Closed): Plant Configuration --> System not displays the Existing data in Manufacturing Line/Assembly Line and Equipment
- Plant Configuration--> System not displays the Existing data in Manufacturing Line/Assembly Line and Equipment
- 07:02 PM Bug #9712 (Open): Spare Part Master While clicking on Existing data in Spare Part Master, it displays “Server Error”.
- 10:52 AM Bug #9712 (Closed): Spare Part Master While clicking on Existing data in Spare Part Master, it displays “Server Error”.
- Spare Part Master While clicking on Existing data in Spare Part Master, it displays “Server Error”.
- 07:02 PM Bug #9711 (Open): PM Supervisor and PM Calendar When clicking on Definition code, it displays “Server Error”. So cant able to verify the Workorder functionality.
- 10:51 AM Bug #9711 (Closed): PM Supervisor and PM Calendar When clicking on Definition code, it displays “Server Error”. So cant able to verify the Workorder functionality.
- PM Supervisor and PM Calendar When clicking on Definition code, it displays “Server Error”. So cant able to verify t...
- 07:02 PM Bug #9710 (Open): Equipment: When a user tries to create a New Equipment, the system doesn’t displays the details of Existing Active Manufacturing and Vendor details. So cant able to create a New Equipment.
- 10:42 AM Bug #9710 (Closed): Equipment: When a user tries to create a New Equipment, the system doesn’t displays the details of Existing Active Manufacturing and Vendor details. So cant able to create a New Equipment.
- Equipment: When a user tries to create a New Equipment, the system doesn’t displays the details of Existing Active M...
- 10:48 AM Bug #9691 (Fixed with Hotfix): Batch Download:Download/Download original/Stitch document are not working, when clicking on download, there is no response
- 10:48 AM Bug #9692 (Fixed with Hotfix): Customize email messages: When clicking on the email context it shows Error: - There is no row at position 0
11/13/2018
- 06:30 PM Bug #9691 (Resolved): Batch Download:Download/Download original/Stitch document are not working, when clicking on download, there is no response
- 05:24 PM Bug #9691 (Open): Batch Download:Download/Download original/Stitch document are not working, when clicking on download, there is no response
- 04:36 PM Bug #9691 (Closed): Batch Download:Download/Download original/Stitch document are not working, when clicking on download, there is no response
- Batch Download:Download/Download original/Stitch document are not working, when clicking on download, there is no res...
- 06:29 PM Bug #9690 (Resolved): TOC:Last revision date is not updated for the document which has auto approval route
- 05:24 PM Bug #9690 (Open): TOC:Last revision date is not updated for the document which has auto approval route
- 04:36 PM Bug #9690 (Closed): TOC:Last revision date is not updated for the document which has auto approval route
- TOC:Last revision date is not updated for the document which has auto approval route
- 06:29 PM Bug #9692 (Resolved): Customize email messages: When clicking on the email context it shows Error: - There is no row at position 0
- 05:24 PM Bug #9692 (Open): Customize email messages: When clicking on the email context it shows Error: - There is no row at position 0
- 04:37 PM Bug #9692 (Closed): Customize email messages: When clicking on the email context it shows Error: - There is no row at position 0
- Customize email messages: When clicking on the email context it shows Error: - There is no row at position 0
- 06:20 PM Bug #9706 (Fixed with Hotfix): Removed elements are not saved in Concern creation & evaluation form (refer steps)
- 06:20 PM Bug #9706 (Resolved): Removed elements are not saved in Concern creation & evaluation form (refer steps)
- 05:25 PM Bug #9706 (Open): Removed elements are not saved in Concern creation & evaluation form (refer steps)
- 04:49 PM Bug #9706 (Closed): Removed elements are not saved in Concern creation & evaluation form (refer steps)
- Removed elements are not saved in Concern creation & evaluation form
- 05:25 PM Bug #9708 (Open): Project Review - Task and Phase details are displayed thrice(Only in Musashi DB)
- 04:52 PM Bug #9708 (Closed): Project Review - Task and Phase details are displayed thrice(Only in Musashi DB)
- Project Review - Task and Phase details are displayed thrice(Only in Musashi DB)
- 05:25 PM Bug #9707 (Open): Clicking on task link from action management it displays blank gantt screen.
- 04:50 PM Bug #9707 (Closed): Clicking on task link from action management it displays blank gantt screen.
- Clicking on task link from action management it displays blank gantt screen.
- 05:25 PM Bug #9705 (Open): When clicking on deliverable info, Document attaching tab displayed blank.(PPAP Engine program heroic)
- 04:49 PM Bug #9705 (Closed): When clicking on deliverable info, Document attaching tab displayed blank.(PPAP Engine program heroic)
- When clicking on deliverable info, Document attaching tab displayed blank.(PPAP Engine program heroic)
- 05:25 PM Bug #9704 (Open): Attach output document button is not visible for the resource.(UPPAP ejector Control)
- 04:46 PM Bug #9704 (Closed): Attach output document button is not visible for the resource.(UPPAP ejector Control)
- Attach output document button is not visible for the resource.(Project name: UPPAP ejector Control)
- 05:24 PM Bug #9703 (Open): Clicking on routes under Risk setup displays blank page.
- 04:43 PM Bug #9703 (Closed): Clicking on routes under Risk setup displays blank page.
- Clicking on routes under Risk setup displays blank page.
- 05:24 PM Bug #9701 (Open): Clicking on Templates it displayed blank Gantt chart.
- 04:41 PM Bug #9701 (Closed): Clicking on Templates it displayed blank Gantt chart.
- Clicking on Templates it displayed blank Gantt chart.
- 05:24 PM Bug #9699 (Open): Clicking on Risk priority icon in the gantt does not displays the risk form details
- 04:40 PM Bug #9699 (Closed): Clicking on Risk priority icon in the gantt does not displays the risk form details
- Clicking on Risk priority icon in the gantt does not displays the risk form details
- 05:24 PM Bug #9697 (Open): ECR form not displayed-> clicking on change request displayed error.
- 04:39 PM Bug #9697 (Closed): ECR form not displayed-> clicking on change request displayed error.
- ECR form not displayed-> clicking on change request displayed error.
- 05:24 PM Bug #9696 (Open): Cant able to set route, shows error.(occurs for new as well as existing data)
- 04:39 PM Bug #9696 (Closed): Cant able to set route, shows error.(occurs for new as well as existing data)
- • Cant able to set route, shows error.(occurs for new as well as existing data)
- 05:24 PM Bug #9693 (Open): When Clicking on Risk icon it displays the risk raised details but for few risk icon no response on clicking risk assigned icon.
- 04:38 PM Bug #9693 (Closed): When Clicking on Risk icon it displays the risk raised details but for few risk icon no response on clicking risk assigned icon.
- Clicking on existing risk in a project it shows error - Working in Sales DB
Sales DB: When Clicking on Risk icon ... - 05:24 PM Bug #9689 (Open): Clicking on few project it shows server error and Blank screen.
- 04:11 PM Bug #9689 (Closed): Clicking on few project it shows server error and Blank screen.
- Clicking on few project it shows server error and Blank screen.
Also available in: Atom