Project

General

Profile

Actions
Summary

Issues

Filters

Apply Clear

# Tracker Status Priority Subject Updated Author MODULES Build Cycle Assignee Project Target version Category Start date Due date Total estimated time Created Closed Steps To Reproduce Customer
640 Bug WAD Medium Tried to import the effect table in Global but created new Production Item 04/27/2017 05:01 PM Anonymous AQUAPRO Cycle 3 Sugesh g pillai EwQIMS SP650 03/20/2017 03/20/2017 03:19 PM 04/27/2017 05:01 PM

NANAna

 Valeo Actions
639 Bug New Medium Report page loading is very slow 03/20/2017 06:11 PM Anonymous AQUAPRO Cycle 3 Sugesh g pillai EwQIMS SP650 03/20/2017 03/20/2017 03:18 PM

1.Go to Aquapro module
2.Click Reports

 Valeo Actions
634 Bug New Medium header Alignment is not proper in Control plan . 03/20/2017 02:25 PM Anonymous AQUAPRO Cycle 3 Sugesh g pillai EwQIMS SP650 03/20/2017 03/20/2017 02:25 PM

1.Go to Aquapro module
2.Click Aquapro->main.
3.Click any PI-> Open Any DFMEA and PFMEA.
4.Inside DFMEA Document->Right Click-> print document
4.Right in Sppc tracking Sheet ->Click Publish

 Actions
29 Bug New High When Assigning responsibility person in DFMEA for each branch Shows Error(Fn_Done:[object Error]). 01/18/2017 11:55 AM Anonymous AQUAPRO Cycle 10 Sugesh g pillai EwQIMS SP650 01/17/2017 01/17/2017 05:26 PM 01/17/2017 05:26 PM

1. Select Any production item
2. Open DFMEA Document
3. Go to responsibility Column
4. Fill multiple branch with responsibility person
5. Observer results

 Actions
24 Bug New Medium Entering value in Corrective action column shows Js Error 02/24/2017 05:00 PM Anonymous AQUAPRO Cycle 10 Sugesh g pillai EwQIMS SP650 01/17/2017 01/17/2017 05:10 PM 01/17/2017 05:10 PM

• Select any Production Item ->Go to Dfmea ->Open it.
• Enter data in corrective action column and Click the mouse pointer to next column
• Observe results

 Actions
19 Bug New Medium IN SPPC TS Showing No Name if there is no Tolerance value Given Aquapro 01/17/2017 04:45 PM Anonymous AQUAPRO Sugesh g pillai EwQIMS SP650 01/17/2017 01/17/2017 04:45 PM 01/17/2017 04:45 PM

• Go to Sppc TS in SPPC Segment
• Select Characterisic column (Which doesn’t have tolerance value )
• Observe results

 Actions
17 Bug New High There is no refresh of the Risk identified column 01/18/2017 12:12 PM Anonymous AQUAPRO Cycle 10 Sugesh g pillai EwQIMS SP650 01/17/2017 01/17/2017 04:29 PM 01/17/2017 04:29 PM

• Go to PFMEA->remove the Value in SPPC name Column
• See the Risk Identification Column ->"Acceptable" Change to green
• Again add value in Sppc name
• See the Risk Identification Column observe result.

 Actions
10 Bug New Medium "Help" link is not there in Dashboard. 01/17/2017 03:31 PM Anonymous AQUAPRO Sugesh g pillai EwQIMS SP650 01/17/2017 01/17/2017 03:31 PM 01/17/2017 03:31 PM

• Go to Sppc tracking sheet from the PI
• Click in dashboard tab
• Observer result.

 Actions
9 Bug New High Risk Identified colunm in Right displayed data wrongly 01/17/2017 03:25 PM Anonymous AQUAPRO Sugesh g pillai EwQIMS SP650 01/17/2017 01/17/2017 03:25 PM 01/17/2017 03:25 PM

• GO to Dfmea in Any production Item Select Sev=4 occ+Dec=6
• observe result.

 Actions
6 Bug New Medium The Security is not working on SPPC Segment 01/13/2017 05:04 PM User Admin Sugesh g pillai EwQIMS SP650 01/13/2017 01/13/2017 05:04 PM 01/13/2017 05:04 PM

NA
The Security is not working on SPPC Segment

 Actions
4 Bug New Medium Search with CTRL + F 01/13/2017 05:00 PM User Admin Sugesh g pillai EwQIMS SP650 01/13/2017 01/13/2017 05:00 PM 01/13/2017 05:00 PM

1. login in To Aquapro
2. Open any documents
3. use CTRL+F and Search
4. Observe result

 Actions
3 Bug In Progress Low Allignment related issue in AQUA Document 01/13/2017 05:22 PM Sugesh g pillai Sugesh g pillai EwQIMS SP650 01/13/2017 01/20/2017 01/13/2017 04:26 PM 01/13/2017 05:19 PM

1. Open any documents ( Say DFMEA open below)
2. Scroll down till the last
3. Then go up using your mouse scroll button
4.Suddenly the alignment will show like below and then your scroll button also not move further.

 Actions
2 Bug New Medium Show override while click on Deleted Column 01/13/2017 04:22 PM Sugesh g pillai Sugesh g pillai EwQIMS SP650 01/13/2017 01/13/2017 04:22 PM 01/13/2017 04:22 PM

1) Delete any cell value form the For a Pitem
2) Open With Since data and Time
3) Right click on the cell click on Show Show override/Change level ( which is showing as deleted in corresponding color)
4. Observe Result

 Actions
1 Bug New Medium Refresh required in Aqua Page 01/13/2017 04:08 PM User Admin Sugesh g pillai EwQIMS SP650 01/13/2017 01/13/2017 04:06 PM 01/13/2017 04:06 PM

1) Open to PFMEA
2) Click on Product Characteristic Name column
3)Change the product characteristics to product characteristics from the drop down, if anyother dropdown was selected. ( Risk identified column will display in blue color if any others are selected or will displays in green color)
4) Now change the dropdown accordingly and observe the result in Reisk identified column
5) it will needs to refresh each time to get the changes we made in the dropdown

 Actions
    (1-14/14)

    Also available in: Atom CSV PDF