Activity - DEV TEAM PROJECT TRACKING - OMNEX ISSUE TRACKER

Activity

From 06/29/2020 to 07/28/2020

07/28/2020

08:06 PM Bug #17244 (Resolved): Inspection Form Std : Sample frequency is not listing in the drop down for In-Process Inspection Production item: Anonymous
06:01 PM Bug #17244 (In Progress): Inspection Form Std : Sample frequency is not listing in the drop down for In-Process Inspection Production item: Anonymous
06:01 PM Bug #17244 (Open): Inspection Form Std : Sample frequency is not listing in the drop down for In-Process Inspection Production item: Anonymous
01:07 PM Bug #17244 (Closed): Inspection Form Std : Sample frequency is not listing in the drop down for In-Process Inspection Production item: Inspection Form Std : Sample frequency is not listing in the drop down for In-Process Inspection Production item Anonymous
07:39 PM Bug #17253 (Closed): Customize Email Messages : THL label displaying in Header section: Customize Email Messages : THL label displaying in Header section Anonymous
06:05 PM Bug #17099 (In Progress): User Selection pop-up issue: In any user selection pop-up, Users selected after clicking on next button, are actually not getting selected.: Anonymous
06:01 PM Bug #17246 (In Progress): Department Worksheet : Sort Tab - Blank Pop-up is opening on clicking Sort Disposition link: Anonymous
06:01 PM Bug #17246 (Open): Department Worksheet : Sort Tab - Blank Pop-up is opening on clicking Sort Disposition link: Anonymous
04:57 PM Bug #17246 (Closed): Department Worksheet : Sort Tab - Blank Pop-up is opening on clicking Sort Disposition link: Production Scheduling : Sort Tab - Blank Pop-up is opening on clicking Sort Disposition link Anonymous
06:01 PM Bug #17243 (In Progress): Inspection Sampling Plan : Previously/Lastly entered reason for change/category class is showing in the pop-up by-default on changing the Inspection mode: Anonymous
06:00 PM Bug #17243 (Open): Inspection Sampling Plan : Previously/Lastly entered reason for change/category class is showing in the pop-up by-default on changing the Inspection mode: Anonymous
12:54 PM Bug #17243 (Closed): Inspection Sampling Plan : Previously/Lastly entered reason for change/category class is showing in the pop-up by-default on changing the Inspection mode: Scenario
1st time change the inspection mode
Enter below details
Reason : A
Class : A
2nd time change the in... Anonymous
06:01 PM Bug #17242 (In Progress): Inspection Sampling Plan : Allowing to change the Inspection mode, without saving the reason for change/category class pop-up: Anonymous
06:00 PM Bug #17242 (Open): Inspection Sampling Plan : Allowing to change the Inspection mode, without saving the reason for change/category class pop-up: Anonymous
12:34 PM Bug #17242 (Closed): Inspection Sampling Plan : Allowing to change the Inspection mode, without saving the reason for change/category class pop-up: Inspection Sampling Plan : Allowing to change the Inspection mode, without saving the reason for change/category clas... Anonymous
05:54 PM Bug #17247 (In Progress): Department Worksheet : Sort Tab - Can remove the edit button from the Action list since we already have Sort link to do the Scrap/Rework Disposition: Anonymous
05:53 PM Bug #17247 (Open): Department Worksheet : Sort Tab - Can remove the edit button from the Action list since we already have Sort link to do the Scrap/Rework Disposition: Anonymous
05:18 PM Bug #17247 (Closed): Department Worksheet : Sort Tab - Can remove the edit button from the Action list since we already have Sort link to do the Scrap/Rework Disposition: Department Worksheet : Sort Tab - Can remove the edit button from the Action list since we already have Sort link to ... Anonymous
05:52 PM Bug #17239 (In Progress): Target PPM : Receiving Inspection : Done button not showing in the supplier selection Pop-up: Anonymous
05:52 PM Bug #17239 (Open): Target PPM : Receiving Inspection : Done button not showing in the supplier selection Pop-up: Anonymous
11:43 AM Bug #17239 (Closed): Target PPM : Receiving Inspection : Done button not showing in the supplier selection Pop-up: Target PPM : Receiving Inspection : Done button not showing in the supplier selection Pop-up Anonymous
05:50 PM Bug #17094 (Closed): IC Settings : Can remove the horizontal scroll bar: Anonymous
05:49 PM Bug #17094 (Resolved): IC Settings : Can remove the horizontal scroll bar: Anonymous
05:45 PM Bug #17097 (Closed): Customize email Message Menu : On Pop-up shown on clicking on email content is right aligned,so unable to close it: Anonymous
05:44 PM Bug #17097 (Resolved): Customize email Message Menu : On Pop-up shown on clicking on email content is right aligned,so unable to close it: Anonymous
05:38 PM Bug #17093 (Closed): On Clicking EwQIMS menu its not navigating to the Home page / Home page is not displaying while logging as administrator: Fixed in Pre-build Anonymous
05:38 PM Bug #17093 (Resolved): On Clicking EwQIMS menu its not navigating to the Home page / Home page is not displaying while logging as administrator: Anonymous
05:36 PM Bug #17096 (Not Fixed with Hotfix): New Template : Rename Header Column name "View Designer" as "Designer" and in records "View Designer" as "View": Please Rename in records "Designer" as "View" Anonymous
01:38 PM Bug #17125 (Fixed with Hotfix): While loading the In-process Inspection sheet half screen is displayed in black / white color: Anonymous
01:12 PM Bug #17185 (Fixed with Hotfix): Department worksheet: Sort Tab is not loading: Anonymous
01:08 PM Bug #17211 (Fixed with Hotfix): Receiving/Final Inspection : No Response on clicking edit button corresponding to each schedules: Anonymous
12:57 PM Bug #17177 (Fixed with Hotfix): Inspection Parameters : Unable to delete Operations / Characteristics which are added corresponding to Parent Production Item: Anonymous
12:34 AM Bug #17177 (Resolved): Inspection Parameters : Unable to delete Operations / Characteristics which are added corresponding to Parent Production Item: Anonymous
12:57 PM Bug #17228 (Fixed with Hotfix): Inspection Parameters : Showing html tags in Operation name column, while performing edit operation in Operation grid: Anonymous
12:57 PM Bug #17227 (Fixed with Hotfix): Inspection parameters : For Purchased PI remove the Supplier field from the characteristic entry pop-up: Anonymous
12:18 PM Bug #17098 (Fixed with Hotfix): Inspection Sampling Plan : After changing the Inspection Mode, pop-up is not displaying for capturing reason for change and category: Anonymous
12:16 PM Bug #17089 (Fixed with Hotfix): Inspection Sheet : Increase the size of the text box for entering comments, while accepting/rejecting the lot against the AQL setup: Anonymous
12:11 PM Bug #17225 (Fixed with Hotfix): Receiving and Final Inspection : If AQL required is enabled in IC Settings,in Inspection entry pop-up Sample size,Acceptance/Rejection Number is not showing based on the created sampling plan: Anonymous

07/27/2020

07:14 PM Bug #17225 (Resolved): Receiving and Final Inspection : If AQL required is enabled in IC Settings,in Inspection entry pop-up Sample size,Acceptance/Rejection Number is not showing based on the created sampling plan: Anonymous
02:39 PM Bug #17225 (In Progress): Receiving and Final Inspection : If AQL required is enabled in IC Settings,in Inspection entry pop-up Sample size,Acceptance/Rejection Number is not showing based on the created sampling plan: Anonymous
02:34 PM Bug #17225 (Open): Receiving and Final Inspection : If AQL required is enabled in IC Settings,in Inspection entry pop-up Sample size,Acceptance/Rejection Number is not showing based on the created sampling plan: Anonymous
12:11 PM Bug #17225 (Closed): Receiving and Final Inspection : If AQL required is enabled in IC Settings,in Inspection entry pop-up Sample size,Acceptance/Rejection Number is not showing based on the created sampling plan: Receiving and Final Inspection : If AQL required is enabled in IC Settings,in Inspection entry pop-up sample size,Acc... Anonymous
05:30 PM Bug #17227 (Resolved): Inspection parameters : For Purchased PI remove the Supplier field from the characteristic entry pop-up: Anonymous
02:38 PM Bug #17227 (In Progress): Inspection parameters : For Purchased PI remove the Supplier field from the characteristic entry pop-up: Anonymous
02:37 PM Bug #17227 (Not Resolved): Inspection parameters : For Purchased PI remove the Supplier field from the characteristic entry pop-up: Anonymous
02:36 PM Bug #17227 (Resolved): Inspection parameters : For Purchased PI remove the Supplier field from the characteristic entry pop-up: Anonymous
02:33 PM Bug #17227 (Open): Inspection parameters : For Purchased PI remove the Supplier field from the characteristic entry pop-up: Anonymous
12:38 PM Bug #17227 (Closed): Inspection parameters : For Purchased PI remove the Supplier field from the characteristic entry pop-up: Inspection parameters : For Purchased PI remove the Supplier field from the characteristic entry pop-up Anonymous
05:30 PM Bug #17173 (Resolved): Production In-process : In Operations Grid, all operations are getting deleted while deleting a single operation form the list: Anonymous
02:39 PM Bug #17226 (In Progress): In-process Inspection entry pop-up : Operator field should be read only..and can have a uniform background color for all 3 types of Inspection entry pop-up: Anonymous
02:35 PM Bug #17226 (Open): In-process Inspection entry pop-up : Operator field should be read only..and can have a uniform background color for all 3 types of Inspection entry pop-up: Anonymous
12:21 PM Bug #17226 (Closed): In-process Inspection entry pop-up : Operator field should be read only..and can have a uniform background color for all 3 types of Inspection entry pop-up: In-process Inspection entry pop-up : Operator field should be read only..and can have a uniform background color for ... Anonymous
02:39 PM Bug #17224 (In Progress): Receiving and In-process Inspection : Change Part functionality is not working: Anonymous
02:34 PM Bug #17224 (Open): Receiving and In-process Inspection : Change Part functionality is not working: Anonymous
12:05 PM Bug #17224 (Closed): Receiving and In-process Inspection : Change Part functionality is not working: Receiving and In-process Inspection : Change Part functionality is not working Anonymous
02:36 PM Bug #17228 (Resolved): Inspection Parameters : Showing html tags in Operation name column, while performing edit operation in Operation grid: Anonymous
02:33 PM Bug #17228 (Open): Inspection Parameters : Showing html tags in Operation name column, while performing edit operation in Operation grid: Anonymous
12:47 PM Bug #17228 (Closed): Inspection Parameters : Showing html tags in Operation name column, while performing edit operation in Operation grid: Inspection Parameters : Showing html tags in Operation name column, while performing edit operation in Operation grid Anonymous
12:42 PM Bug #17018 (Fixed with Hotfix): Setup Menu : Half portion of Inspection Form standard label is clipped off: Anonymous
10:52 AM Bug #17183 (Fixed with Hotfix): Production Scheduling : Rate/Hour field is showing blank in Inspection schedule details pop-up. Rate/Hour mapped corresponding to the PI is not displaying in the schedule details pop-up: Anonymous
10:51 AM Bug #17182 (Fixed with Hotfix): Production Scheduling : Schedule not getting created on clicking Save button: Anonymous
10:51 AM Bug #17180 (Fixed with Hotfix): Plant Configuration : Category name alignment not proper in header section: Anonymous
10:48 AM Bug #17181 (Fixed with Hotfix): Inspection form standard : Unable to view the done button in the PI selection pop-up window: Anonymous
10:48 AM Bug #17187 (Fixed with Hotfix): Part : Unable to Publish Control Plan.Publish pop-up is opened in a gray background so unable to proceed further: Anonymous
10:47 AM Bug #17218 (Fixed with Hotfix): Equipment Tree : Saved Assembly line and Equipment Details are not listing in the left side view after showing saved successfully alert: Anonymous
10:47 AM Bug #17219 (Fixed with Hotfix): Part Equipment Mapping : Unable to select the Operator form the Operator pop-up: Anonymous
04:30 AM Bug #17211 (Resolved): Receiving/Final Inspection : No Response on clicking edit button corresponding to each schedules: Anonymous
04:05 AM Bug #17098 (Resolved): Inspection Sampling Plan : After changing the Inspection Mode, pop-up is not displaying for capturing reason for change and category: Anonymous
01:34 AM Bug #17096 (Resolved): New Template : Rename Header Column name "View Designer" as "Designer" and in records "View Designer" as "View": Mohan kumar

07/26/2020

11:59 PM Bug #17183 (Resolved): Production Scheduling : Rate/Hour field is showing blank in Inspection schedule details pop-up. Rate/Hour mapped corresponding to the PI is not displaying in the schedule details pop-up: Anonymous
11:53 PM Bug #17213 (Resolved): Search by date from date picker is not working in Receiving/Final scheduling and Inspection page: Anonymous
06:43 PM Bug #17177 (In Progress): Inspection Parameters : Unable to delete Operations / Characteristics which are added corresponding to Parent Production Item: Anonymous
06:43 PM Bug #17177 (Not Resolved): Inspection Parameters : Unable to delete Operations / Characteristics which are added corresponding to Parent Production Item: Anonymous
06:10 PM Bug #17177 (Resolved): Inspection Parameters : Unable to delete Operations / Characteristics which are added corresponding to Parent Production Item: Anonymous
06:42 PM Bug #17185 (Resolved): Department worksheet: Sort Tab is not loading: Anonymous
06:12 PM Bug #17182 (Resolved): Production Scheduling : Schedule not getting created on clicking Save button: Anonymous
06:01 PM Bug #17125 (Resolved): While loading the In-process Inspection sheet half screen is displayed in black / white color: Anonymous
03:19 PM Bug #17187 (Resolved): Part : Unable to Publish Control Plan.Publish pop-up is opened in a gray background so unable to proceed further: Anonymous
03:21 AM Bug #17181 (Resolved): Inspection form standard : Unable to view the done button in the PI selection pop-up window: Anonymous
12:02 AM Bug #17089 (Resolved): Inspection Sheet : Increase the size of the text box for entering comments, while accepting/rejecting the lot against the AQL setup: Anonymous

07/25/2020

11:27 PM Bug #17219 (Resolved): Part Equipment Mapping : Unable to select the Operator form the Operator pop-up: Anonymous
02:00 AM Bug #17219 (In Progress): Part Equipment Mapping : Unable to select the Operator form the Operator pop-up: Anonymous
01:59 AM Bug #17219 (Open): Part Equipment Mapping : Unable to select the Operator form the Operator pop-up: Anonymous
06:38 PM Bug #17170 (Resolved): Receiving Inspection scheduling : Upon selecting the supplier the part will be automatically fetched and displays in the drop-down.In this case schedule is not getting saved on clicking save button: Anonymous
02:02 AM Bug #17213 (In Progress): Search by date from date picker is not working in Receiving/Final scheduling and Inspection page: Anonymous
02:00 AM Bug #17213 (Open): Search by date from date picker is not working in Receiving/Final scheduling and Inspection page: Anonymous
02:02 AM Bug #17211 (In Progress): Receiving/Final Inspection : No Response on clicking edit button corresponding to each schedules: Anonymous
02:01 AM Bug #17211 (Open): Receiving/Final Inspection : No Response on clicking edit button corresponding to each schedules: Anonymous
02:01 AM Bug #17212 (In Progress): Search Inspection Entry : Upon changing the PI, Operations and Lot details are not loading corresponding to the new PI: Anonymous
02:01 AM Bug #17212 (Open): Search Inspection Entry : Upon changing the PI, Operations and Lot details are not loading corresponding to the new PI: Anonymous
12:09 AM Bug #17218 (Resolved): Equipment Tree : Saved Assembly line and Equipment Details are not listing in the left side view after showing saved successfully alert: Anonymous
12:08 AM Bug #17218 (Open): Equipment Tree : Saved Assembly line and Equipment Details are not listing in the left side view after showing saved successfully alert: Anonymous

07/24/2020

11:19 PM Bug #17180 (Resolved): Plant Configuration : Category name alignment not proper in header section: Anonymous
10:31 PM Bug #17219 (Closed): Part Equipment Mapping : Unable to select the Operator form the Operator pop-up: Part Equipment Mapping : Unable to select the Operator form the Operator pop-up
Operator Pop-up is displaying belo... Anonymous
10:20 PM Bug #17218 (Closed): Equipment Tree : Saved Assembly line and Equipment Details are not listing in the left side view after showing saved successfully alert: Equipment Tree : Saved Assembly line and Equipment Details are not listing in the left side view after showing saved ... Anonymous
06:45 PM Bug #17166 (Resolved): Inspection Entry pop-up : Existing values entered in Lot / Receipt number fields are over-riding on other fields, while entering a now Lot no: Anonymous
04:14 PM Bug #17213 (Closed): Search by date from date picker is not working in Receiving/Final scheduling and Inspection page: Search by date from date picker is not working in Receiving/Final scheduling and Inspection page Anonymous
03:41 PM Bug #17212 (Closed): Search Inspection Entry : Upon changing the PI, Operations and Lot details are not loading corresponding to the new PI: Search Inspection Entry : Upon changing the PI, Operations and Lot details are not loading corresponding to the new PI Anonymous
03:31 PM Bug #17211 (Closed): Receiving/Final Inspection : No Response on clicking edit button corresponding to each schedules: Receiving/Final Inspection : No Response on clicking edit button corresponding to each schedules Anonymous
01:14 PM Bug #17178 (Fixed with Hotfix): Common for all types of Inspection - Header part in Inspection Sheet : Keep proper spacing and alignment for Change part and View document field: Anonymous
01:07 PM Bug #17178 (Resolved): Common for all types of Inspection - Header part in Inspection Sheet : Keep proper spacing and alignment for Change part and View document field: Anonymous
01:13 PM Bug #17179 (Fixed with Hotfix): Supervisor Approval sheet : Can remove the edit option from the actions field,since submitted Lot details cannot be edited: Anonymous
01:01 PM Bug #17179 (Resolved): Supervisor Approval sheet : Can remove the edit option from the actions field,since submitted Lot details cannot be edited: Anonymous
11:31 AM Bug #17091 (Fixed with Hotfix): Groups Menu : User selection pop-up Can utilize the blank spaces by increasing the size of the user selection grid: Anonymous
11:30 AM Bug #17093 (Not Fixed with Hotfix): On Clicking EwQIMS menu its not navigating to the Home page / Home page is not displaying while logging as administrator: Anonymous
11:30 AM Bug #17099 (Not Fixed with Hotfix): User Selection pop-up issue: In any user selection pop-up, Users selected after clicking on next button, are actually not getting selected.: Anonymous
11:19 AM Bug #17158 (Fixed with Hotfix): List of menus displaying old UI view in breadcrumb: Anonymous
11:17 AM Bug #17027 (Fixed with Hotfix): All menus Search box :Need a provision to select values from drop-down / Date picker also required for date fields columns: Anonymous
11:13 AM Usability #17095 (Fixed with Hotfix): All pop-ups : Need to show Save/Close option by-fault in all the Pop-ups without scrolling down: Anonymous
10:58 AM Bug #17023 (Fixed with Hotfix): Show Hand symbols for Edit and Delete option instead of Tool-tip: Anonymous
10:57 AM Bug #17085 (Fixed with Hotfix): Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Level/Standard.Same default column can be removed from search box.: Anonymous
10:55 AM Usability #17014 (Fixed with Hotfix): Menus : Need to highlight the sub menus also while doing mouse-hover: Anonymous
10:52 AM Bug #17100 (Fixed with Hotfix): Inspection entry pop-up : If multi-operation is enabled then after selecting the Operation, the selected one is still displaying in the drop down list: Anonymous
10:51 AM Reports #17154 (Fixed with Hotfix): All Reports : Report filter grid is not displaying while opening: Anonymous
10:51 AM Reports #17167 (Fixed with Hotfix): Part Wise Defect PPM / Inspected Defect reports are not working: Anonymous
10:50 AM Reports #17168 (Fixed with Hotfix): Getting error on Opening Final Inspection report: Anonymous
10:47 AM Bug #17171 (Fixed with Hotfix): Operators:Can remove Department-Id field from the search drop-down: Anonymous

07/23/2020

12:48 PM Bug #17099 (Resolved): User Selection pop-up issue: In any user selection pop-up, Users selected after clicking on next button, are actually not getting selected.: Anonymous
12:48 PM Bug #17093 (Resolved): On Clicking EwQIMS menu its not navigating to the Home page / Home page is not displaying while logging as administrator: Anonymous
12:48 PM Bug #17091 (Resolved): Groups Menu : User selection pop-up Can utilize the blank spaces by increasing the size of the user selection grid: Anonymous

07/22/2020

07:05 PM Bug #17171 (Resolved): Operators:Can remove Department-Id field from the search drop-down: Anonymous
04:55 PM Bug #17158 (Resolved): List of menus displaying old UI view in breadcrumb: Anonymous
04:24 PM Usability #17095 (Resolved): All pop-ups : Need to show Save/Close option by-fault in all the Pop-ups without scrolling down: Got a patch from Iyappan and Changeset 62196 Anonymous
04:24 PM Bug #17027 (Resolved): All menus Search box :Need a provision to select values from drop-down / Date picker also required for date fields columns: Got a patch from Iyappan and Changeset 62196 Anonymous
04:24 PM Bug #17023 (Resolved): Show Hand symbols for Edit and Delete option instead of Tool-tip: Got a patch from Iyappan and Changeset 62196 Anonymous
04:24 PM Usability #17014 (Resolved): Menus : Need to highlight the sub menus also while doing mouse-hover: Got a patch from Iyappan and Changeset 62196 Anonymous
12:40 PM Bug #17085 (Resolved): Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Level/Standard.Same default column can be removed from search box.: Anonymous
11:37 AM Bug #17100 (Resolved): Inspection entry pop-up : If multi-operation is enabled then after selecting the Operation, the selected one is still displaying in the drop down list: Anonymous

07/21/2020

08:16 PM Bug #17175 (Fixed with Hotfix): In-process Inspection sheet : Sheet not loading completely,background showing in gray color. So unable to perform Inspection: Anonymous
08:01 PM Bug #17175 (Resolved): In-process Inspection sheet : Sheet not loading completely,background showing in gray color. So unable to perform Inspection: Anonymous
06:43 PM Bug #17175 (Open): In-process Inspection sheet : Sheet not loading completely,background showing in gray color. So unable to perform Inspection: Anonymous
08:15 PM Bug #17090 (Fixed with Hotfix): Search inspection entry: Production items are not listing in the PI selection drop-down: Anonymous
07:41 PM Bug #17090 (Resolved): Search inspection entry: Production items are not listing in the PI selection drop-down: Anonymous
08:14 PM Bug #17187 (In Progress): Part : Unable to Publish Control Plan.Publish pop-up is opened in a gray background so unable to proceed further: Anonymous
08:14 PM Bug #17187 (Open): Part : Unable to Publish Control Plan.Publish pop-up is opened in a gray background so unable to proceed further: Anonymous
07:48 PM Bug #17187 (Closed): Part : Unable to Publish Control Plan.Publish pop-up is opened in a gray background so unable to proceed further: Part : Unable to Publish Control Plan
Also corresponding to PI name and control plan few options are showing,but... Anonymous
08:12 PM Bug #17098 (In Progress): Inspection Sampling Plan : After changing the Inspection Mode, pop-up is not displaying for capturing reason for change and category: Anonymous
06:43 PM Bug #17098 (Open): Inspection Sampling Plan : After changing the Inspection Mode, pop-up is not displaying for capturing reason for change and category: Anonymous
08:11 PM Bug #17100 (In Progress): Inspection entry pop-up : If multi-operation is enabled then after selecting the Operation, the selected one is still displaying in the drop down list: Anonymous
06:43 PM Bug #17100 (Open): Inspection entry pop-up : If multi-operation is enabled then after selecting the Operation, the selected one is still displaying in the drop down list: Anonymous
08:10 PM Bug #17125 (In Progress): While loading the In-process Inspection sheet half screen is displayed in black / white color: Anonymous
06:43 PM Bug #17125 (Open): While loading the In-process Inspection sheet half screen is displayed in black / white color: Anonymous
08:09 PM Bug #17158 (In Progress): List of menus displaying old UI view in breadcrumb: Anonymous
06:43 PM Bug #17158 (Open): List of menus displaying old UI view in breadcrumb: Anonymous
08:08 PM Bug #17166 (In Progress): Inspection Entry pop-up : Existing values entered in Lot / Receipt number fields are over-riding on other fields, while entering a now Lot no: Anonymous
06:43 PM Bug #17166 (Open): Inspection Entry pop-up : Existing values entered in Lot / Receipt number fields are over-riding on other fields, while entering a now Lot no: Anonymous
08:07 PM Bug #17170 (In Progress): Receiving Inspection scheduling : Upon selecting the supplier the part will be automatically fetched and displays in the drop-down.In this case schedule is not getting saved on clicking save button: Anonymous
06:43 PM Bug #17170 (Open): Receiving Inspection scheduling : Upon selecting the supplier the part will be automatically fetched and displays in the drop-down.In this case schedule is not getting saved on clicking save button: Anonymous
08:05 PM Bug #17171 (In Progress): Operators:Can remove Department-Id field from the search drop-down: Anonymous
06:43 PM Bug #17171 (Open): Operators:Can remove Department-Id field from the search drop-down: Anonymous
08:03 PM Bug #17173 (In Progress): Production In-process : In Operations Grid, all operations are getting deleted while deleting a single operation form the list: Anonymous
06:43 PM Bug #17173 (Open): Production In-process : In Operations Grid, all operations are getting deleted while deleting a single operation form the list: Anonymous
08:01 PM Bug #17177 (In Progress): Inspection Parameters : Unable to delete Operations / Characteristics which are added corresponding to Parent Production Item: Anonymous
06:43 PM Bug #17177 (Open): Inspection Parameters : Unable to delete Operations / Characteristics which are added corresponding to Parent Production Item: Anonymous
08:00 PM Bug #17178 (In Progress): Common for all types of Inspection - Header part in Inspection Sheet : Keep proper spacing and alignment for Change part and View document field: Anonymous
06:43 PM Bug #17178 (Open): Common for all types of Inspection - Header part in Inspection Sheet : Keep proper spacing and alignment for Change part and View document field: Anonymous
07:59 PM Bug #17179 (In Progress): Supervisor Approval sheet : Can remove the edit option from the actions field,since submitted Lot details cannot be edited: Anonymous
06:43 PM Bug #17179 (Open): Supervisor Approval sheet : Can remove the edit option from the actions field,since submitted Lot details cannot be edited: Anonymous
07:54 PM Bug #17181 (In Progress): Inspection form standard : Unable to view the done button in the PI selection pop-up window: Anonymous
06:43 PM Bug #17181 (Open): Inspection form standard : Unable to view the done button in the PI selection pop-up window: Anonymous
05:32 PM Bug #17181 (Closed): Inspection form standard : Unable to view the done button in the PI selection pop-up window: Inspection form standard : Unable to view the done button in the PI selection pop-up window
Anonymous
07:53 PM Bug #17182 (In Progress): Production Scheduling : Schedule not getting created on clicking Save button: Anonymous
06:43 PM Bug #17182 (Open): Production Scheduling : Schedule not getting created on clicking Save button: Anonymous
05:44 PM Bug #17182 (Closed): Production Scheduling : Schedule not getting created on clicking Save button: Production Scheduling : Schedule not getting created on clicking Save button Anonymous
07:52 PM Bug #17183 (In Progress): Production Scheduling : Rate/Hour field is showing blank in Inspection schedule details pop-up. Rate/Hour mapped corresponding to the PI is not displaying in the schedule details pop-up: Anonymous
06:43 PM Bug #17183 (Open): Production Scheduling : Rate/Hour field is showing blank in Inspection schedule details pop-up. Rate/Hour mapped corresponding to the PI is not displaying in the schedule details pop-up: Anonymous
05:52 PM Bug #17183 (Closed): Production Scheduling : Rate/Hour field is showing blank in Inspection schedule details pop-up. Rate/Hour mapped corresponding to the PI is not displaying in the schedule details pop-up: Production Scheduling : Rate/Hour field is showing blank in Inspection schedule details pop-up. Rate/Hour mapped corr... Anonymous
07:50 PM Bug #17185 (In Progress): Department worksheet: Sort Tab is not loading: Anonymous
07:42 PM Bug #17185 (Open): Department worksheet: Sort Tab is not loading: Anonymous
07:09 PM Bug #17185 (Closed): Department worksheet: Sort Tab is not loading: Department worksheet: Sort Tab is not loading Anonymous
07:49 PM Bug #17085 (In Progress): Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Level/Standard.Same default column can be removed from search box.: Anonymous
07:06 PM Bug #17149 (Fixed with Hotfix): Department worksheet: Sort/Scrap/Rework Tabs are not loading: Anonymous
06:43 PM Bug #17180 (Open): Plant Configuration : Category name alignment not proper in header section: Anonymous
06:43 PM Bug #17099 (Open): User Selection pop-up issue: In any user selection pop-up, Users selected after clicking on next button, are actually not getting selected.: Anonymous

07/20/2020

08:33 PM Bug #17180 (Closed): Plant Configuration : Category name alignment not proper in header section: Plant Configuration : Category name alignment not proper in header section
(Refer Screenshot) Anonymous
08:08 PM Bug #17179 (Closed): Supervisor Approval sheet : Can remove the edit option from the actions field,since submitted Lot details cannot be edited: Supervisor Approval sheet : Can remove the edit option from the actions field,since submitted Lot details cannot be e... Anonymous
07:54 PM Bug #17178 (Closed): Common for all types of Inspection - Header part in Inspection Sheet : Keep proper spacing and alignment for Change part and View document field: Header part in Inspection Sheet : Keep proper spacing and alignment for Change part and View document field Anonymous
07:28 PM Bug #17177 (Closed): Inspection Parameters : Unable to delete Operations / Characteristics which are added corresponding to Parent Production Item: Inspection Parameters : Unable to delete Operations / Characteristics which are added corresponding to Parent Product... Anonymous
06:22 PM Bug #17175 (Closed): In-process Inspection sheet : Sheet not loading completely,background showing in gray color. So unable to perform Inspection: In-process Inspection sheet : Sheet not loading completely,background showing in gray color. So unable to perform Ins... Anonymous
06:17 PM Bug #17173 (Closed): Production In-process : In Operations Grid, all operations are getting deleted while deleting a single operation form the list: Production In-process : In Operations Grid, all operations are getting deleted while deleting a single operation from... Anonymous
05:15 PM Bug #17171 (Closed): Operators:Can remove Department-Id field from the search drop-down: Operators:Can remove Department-Id field from the search drop-down Anonymous
05:05 PM Bug #17170 (Closed): Receiving Inspection scheduling : Upon selecting the supplier the part will be automatically fetched and displays in the drop-down.In this case schedule is not getting saved on clicking save button: Receiving Inspection scheduling : Upon selecting the supplier the part will be automatically fetched and displays in ... Anonymous
04:52 PM Bug #17149 (Resolved): Department worksheet: Sort/Scrap/Rework Tabs are not loading: Anonymous
04:25 PM Reports #17167 (Resolved): Part Wise Defect PPM / Inspected Defect reports are not working: Anonymous
04:24 PM Reports #17168 (Resolved): Getting error on Opening Final Inspection report: Anonymous

07/17/2020

06:01 PM Reports #17168 (Closed): Getting error on Opening Final Inspection report: Getting error on Opening Final Inspection report Anonymous
05:57 PM Reports #17167 (Closed): Part Wise Defect PPM / Inspected Defect reports are not working: Part Wise Defect PPM / Inspected Defect reports are not working Anonymous
05:52 PM Bug #17166 (Closed): Inspection Entry pop-up : Existing values entered in Lot / Receipt number fields are over-riding on other fields, while entering a now Lot no: Inspection Entry pop-up : Existing values entered in Lot / Receipt number fields are over-riding on other fields, whi... Anonymous
04:35 PM Bug #17124 (Fixed with Hotfix): Search inspection entry: Date format not showing correctly after selecting the date from Date picker: Anonymous

07/16/2020

06:00 PM Bug #17158 (Closed): List of menus displaying old UI view in breadcrumb: Customer
Plant config
Part Equipment mapping
Production In-process
Shift
UOM
Inspection parameters Anonymous
02:00 PM Bug #17149 (Open): Department worksheet: Sort/Scrap/Rework Tabs are not loading: Anonymous
01:47 PM Bug #17124 (Resolved): Search inspection entry: Date format not showing correctly after selecting the date from Date picker: Anonymous
01:47 PM Bug #17124 (Open): Search inspection entry: Date format not showing correctly after selecting the date from Date picker: Anonymous
01:45 PM Reports #17154 (Resolved): All Reports : Report filter grid is not displaying while opening: Anonymous

07/15/2020

03:38 PM Reports #17154 (Closed): All Reports : Report filter grid is not displaying while opening: All Reports : Report filter grid is not displaying while opening Anonymous

07/14/2020

11:21 AM Bug #17149 (Closed): Department worksheet: Sort/Scrap/Rework Tabs are not loading: Department worksheet: Sort/Scrap/Rework Tabs are not loading Anonymous

07/09/2020

06:20 PM Bug #17083 (Fixed with Hotfix): Production Scheduling : Data not getting saved on clicking Done button after selecting and updating PI schedule details,corresponding to the Production line: Anonymous
01:00 PM Bug #17125 (Closed): While loading the In-process Inspection sheet half screen is displayed in black / white color: While loading the In-process Inspection sheet half screen is displayed in black / white color
(Refer Screenshot) Anonymous
12:54 PM Bug #17124 (Closed): Search inspection entry: Date format not showing correctly after selecting the date from Date picker: Search inspection entry: Date format not showing correctly after selecting the date from Date picker
Also due to t... Anonymous

07/08/2020

07:14 PM Bug #17083 (Resolved): Production Scheduling : Data not getting saved on clicking Done button after selecting and updating PI schedule details,corresponding to the Production line: Anonymous
04:00 PM Bug #17082 (Fixed with Hotfix): Production Scheduling : If there are multiple PIs corresponding for a Production line, user can edit/update only the first listed PI.Edit button not showing for other PIs: Anonymous
04:00 PM Bug #17080 (Fixed with Hotfix): In-process Inspection entry pop-up : Unable to select Shift from the drop-down: Anonymous

07/06/2020

05:28 PM Bug #17081 (Fixed with Hotfix): Production In-process : In Operations grid, Operation pop-up is not opening.So unable to do the schedule: Anonymous
05:23 PM Bug #17081 (Resolved): Production In-process : In Operations grid, Operation pop-up is not opening.So unable to do the schedule: Anonymous
05:00 PM Bug #17086 (Fixed with Hotfix): Sample Size code letters : Allowing to save data without entering mandatory fields.Need a provision to display an alert to enter mandatory fields: Anonymous
12:31 PM Bug #17100 (Closed): Inspection entry pop-up : If multi-operation is enabled then after selecting the Operation, the selected one is still displaying in the drop down list: Inspection entry pop-up : If multi-operation is enabled then after selecting the Operation, the selected one is still... Anonymous

07/03/2020

04:45 PM Bug #17099 (Closed): User Selection pop-up issue: In any user selection pop-up, Users selected after clicking on next button, are actually not getting selected.: User Selection pop-up issue: In any user selection pop-up, Users selected after clicking on next button, are actually... Anonymous
03:23 PM Bug #17098 (Closed): Inspection Sampling Plan : After changing the Inspection Mode, pop-up is not displaying for capturing reason for change and category: Inspection Sampling Plan : After changing the Inspection Mode, pop-up is not displaying for capturing reason for chan... Anonymous
02:25 PM Usability #17014 (Open): Menus : Need to highlight the sub menus also while doing mouse-hover: Anonymous
02:25 PM Usability #17024 (Open): Need a provision to close the alerts after performing Add/Edit/Delete operations without clicking on the "X" button: Anonymous
02:24 PM Bug #17091 (Open): Groups Menu : User selection pop-up Can utilize the blank spaces by increasing the size of the user selection grid: Anonymous
02:23 PM Bug #17092 (Open): Menu : Can remove the border which is displaying after collapsing the main menu: Anonymous
02:23 PM Bug #17093 (Open): On Clicking EwQIMS menu its not navigating to the Home page / Home page is not displaying while logging as administrator: Anonymous
12:25 PM Bug #17096 (Open): New Template : Rename Header Column name "View Designer" as "Designer" and in records "View Designer" as "View": Anonymous
12:25 PM Usability #17095 (Open): All pop-ups : Need to show Save/Close option by-fault in all the Pop-ups without scrolling down: Anonymous
12:25 PM Bug #17089 (In Progress): Inspection Sheet : Increase the size of the text box for entering comments, while accepting/rejecting the lot against the AQL setup: Anonymous
12:22 PM Bug #17089 (Open): Inspection Sheet : Increase the size of the text box for entering comments, while accepting/rejecting the lot against the AQL setup: Anonymous
12:24 PM Bug #17090 (In Progress): Search inspection entry: Production items are not listing in the PI selection drop-down: Anonymous
12:22 PM Bug #17090 (Open): Search inspection entry: Production items are not listing in the PI selection drop-down: Anonymous
12:22 PM Bug #17097 (Open): Customize email Message Menu : On Pop-up shown on clicking on email content is right aligned,so unable to close it: Anonymous
12:22 PM Bug #17094 (Open): IC Settings : Can remove the horizontal scroll bar: Anonymous

07/02/2020

05:00 PM Bug #17086 (Resolved): Sample Size code letters : Allowing to save data without entering mandatory fields.Need a provision to display an alert to enter mandatory fields: Anonymous
03:20 PM Bug #17097 (Closed): Customize email Message Menu : On Pop-up shown on clicking on email content is right aligned,so unable to close it: Customize email Message Menu : On Pop-up shown on clicking on email content is right aligned,so unable to close it Anonymous
03:19 PM Bug #17080 (Resolved): In-process Inspection entry pop-up : Unable to select Shift from the drop-down: Anonymous
03:16 PM Bug #17085 (Resolved): Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Level/Standard.Same default column can be removed from search box.: Anonymous
03:15 PM Bug #17082 (Resolved): Production Scheduling : If there are multiple PIs corresponding for a Production line, user can edit/update only the first listed PI.Edit button not showing for other PIs: Anonymous
03:00 PM Bug #17096 (Closed): New Template : Rename Header Column name "View Designer" as "Designer" and in records "View Designer" as "View": New Template : Rename Header Column name "View Designer" as "Designer" and in records "View Designer" as "View" Anonymous
02:38 PM Usability #17095 (Closed): All pop-ups : Need to show Save/Close option by-fault in all the Pop-ups without scrolling down: All pop-ups : Need to show Save/Close option by-fault in all the Pop-ups without scrolling down.
Anonymous
02:33 PM Bug #17094 (Closed): IC Settings : Can remove the horizontal scroll bar: IC Settings : Can remove the horizontal scroll bar Anonymous
02:19 PM Bug #17093 (Closed): On Clicking EwQIMS menu its not navigating to the Home page / Home page is not displaying while logging as administrator: On Clicking EwQIMS menu its not navigating to the Home page / Home page is not displaying while logging as administr... Anonymous
12:52 PM Bug #17092 (Closed): Menu : Can remove the border which is displaying after collapsing the main menu: Menu : Can remove the border which is displaying after collapsing the main menu
(Refer Screenshot) Anonymous
12:34 PM Bug #17091 (Closed): Groups Menu : User selection pop-up Can utilize the blank spaces by increasing the size of the user selection grid: Groups Menu : User selection pop-up Can utilize the blank spaces by increasing the size of the user selection grid
... Anonymous
12:10 PM Bug #17090 (Closed): Search inspection entry: Production items are not listing in the PI selection drop-down: Search inspection entry: Production items are not listing in the PI selection drop-down Anonymous
11:52 AM Bug #17089 (Closed): Inspection Sheet : Increase the size of the text box for entering comments, while accepting/rejecting the lot against the AQL setup: Inspection Sheet : Increase the size of the text box for entering comments, while accepting/rejecting the lot against... Anonymous

07/01/2020

05:58 PM Usability #17078 (Open): Supplier : SQI Engineer / Manager user selection pop-up - can remove multiple scroll bars: Anonymous
05:56 PM Bug #17020 (Fixed with Hotfix): Groups Menu : Grids showing multiple times: Anonymous
05:55 PM Bug #17020 (Resolved): Groups Menu : Grids showing multiple times: Anonymous
05:51 PM Bug #17080 (In Progress): In-process Inspection entry pop-up : Unable to select Shift from the drop-down: Anonymous
02:01 PM Bug #17080 (Open): In-process Inspection entry pop-up : Unable to select Shift from the drop-down: Anonymous
05:48 PM Bug #17081 (In Progress): Production In-process : In Operations grid, Operation pop-up is not opening.So unable to do the schedule: Anonymous
02:01 PM Bug #17081 (Open): Production In-process : In Operations grid, Operation pop-up is not opening.So unable to do the schedule: Anonymous
05:47 PM Bug #17085 (In Progress): Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Level/Standard.Same default column can be removed from search box.: Anonymous
05:47 PM Bug #17085 (Not Resolved): Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Level/Standard.Same default column can be removed from search box.: Anonymous
04:12 PM Bug #17085 (Resolved): Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Level/Standard.Same default column can be removed from search box.: Anonymous
02:01 PM Bug #17085 (Open): Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Level/Standard.Same default column can be removed from search box.: Anonymous
11:32 AM Bug #17085 (Closed): Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Level/Standard.Same default column can be removed from search box.: Inspection Mode/Inspection Level/Quality Level Standard : Can remove the default option while creating a new Mode/Lev... Anonymous
05:46 PM Bug #17082 (In Progress): Production Scheduling : If there are multiple PIs corresponding for a Production line, user can edit/update only the first listed PI.Edit button not showing for other PIs: Anonymous
02:01 PM Bug #17082 (Open): Production Scheduling : If there are multiple PIs corresponding for a Production line, user can edit/update only the first listed PI.Edit button not showing for other PIs: Anonymous
05:46 PM Bug #17083 (In Progress): Production Scheduling : Data not getting saved on clicking Done button after selecting and updating PI schedule details,corresponding to the Production line: Anonymous
02:01 PM Bug #17083 (Open): Production Scheduling : Data not getting saved on clicking Done button after selecting and updating PI schedule details,corresponding to the Production line: Anonymous
05:45 PM Bug #17086 (In Progress): Sample Size code letters : Allowing to save data without entering mandatory fields.Need a provision to display an alert to enter mandatory fields: Anonymous
02:01 PM Bug #17086 (Open): Sample Size code letters : Allowing to save data without entering mandatory fields.Need a provision to display an alert to enter mandatory fields: Anonymous
11:58 AM Bug #17086 (Closed): Sample Size code letters : Allowing to save data without entering mandatory fields.Need a provision to display an alert to enter mandatory fields: Sample Size code letters : Allowing to save data without entering mandatory fields.Need a provision to display an ale... Anonymous
05:25 PM Bug #17017 (Fixed with Hotfix): All Menus : Next/Previous button and Pagination is not working: Anonymous
01:26 PM Bug #17017 (Resolved): All Menus : Next/Previous button and Pagination is not working: Anonymous
05:25 PM Bug #17043 (Fixed with Hotfix): Equipment Tree Menu : Alignment and box width should be uniform for all columns: Anonymous
04:58 PM Bug #17043 (Resolved): Equipment Tree Menu : Alignment and box width should be uniform for all columns: Anonymous
04:57 PM Bug #17043 (Open): Equipment Tree Menu : Alignment and box width should be uniform for all columns: Anonymous
04:34 PM Bug #17087 (Fixed with Hotfix): Inspection Sampling Plan : Getting the below alert while opening the menu and while performing Add/Edit/Delete Operation: Anonymous
04:11 PM Bug #17087 (Resolved): Inspection Sampling Plan : Getting the below alert while opening the menu and while performing Add/Edit/Delete Operation: Anonymous
02:01 PM Bug #17087 (Open): Inspection Sampling Plan : Getting the below alert while opening the menu and while performing Add/Edit/Delete Operation: Anonymous
12:12 PM Bug #17087: Inspection Sampling Plan : Getting the below alert while opening the menu and while performing Add/Edit/Delete Operation: Anonymous
12:11 PM Bug #17087 (Closed): Inspection Sampling Plan : Getting the below alert while opening the menu and while performing Add/Edit/Delete Operation: Inspection Sampling Plan : Getting the below alert while opening the menu and while performing Add/Edit/Delete Operat... Anonymous
04:34 PM Bug #17088 (Fixed with Hotfix): Switch Inspection : Data not getting saved: Anonymous
04:10 PM Bug #17088 (Resolved): Switch Inspection : Data not getting saved: Anonymous
02:01 PM Bug #17088 (Open): Switch Inspection : Data not getting saved: Anonymous
12:30 PM Bug #17088 (Closed): Switch Inspection : Data not getting saved: Switch Inspection : Data not getting saved
While entering the new data in pop-up its displaying Supplier field,whi... Anonymous
11:42 AM Bug #17079 (Fixed with Hotfix): Inspection form Std : Production items mapped with Final Inspection template is not listing in the Inspection form std grid: Anonymous

06/29/2020

03:05 PM Bug #17079 (Resolved): Inspection form Std : Production items mapped with Final Inspection template is not listing in the Inspection form std grid: Anonymous
03:05 PM Bug #17079 (Open): Inspection form Std : Production items mapped with Final Inspection template is not listing in the Inspection form std grid: Anonymous

Also available in: Atom