Project

General

Profile

Actions
Copy link

Bug #1350

closed

Bias and Stability Study Menu-Entering the Gage No in the Gage No(Barcode No) field does not displays the Gage details

Added by Anonymous about 8 years ago. Updated almost 8 years ago.

Status:
Closed
Priority:
Medium
Assignee:
-
Start date:
06/19/2017
Due date:
% Done:

100%

Estimated time:
(Total: 0:00 h)
Steps To Reproduce:

1)Login into EWQIMS Application
2)Select MSA Module
3)Go To Calibration TAB
4)Click on Bias menu
5)Enter the GAGE NO (Gage No(Barcode No) field.
6)Observe the Result
7)Go To Stability study TAB
8)Click on conduct Stability study menu
9)Enter the GAGE NO (Gage No(Barcode No) field.
10)Observe the Result

MODULES:
MSAPRO
Build Cycle:
Cycle 0
Customer:
Issue Dependency:
636
Dev Commitment to Resolve in::
700

Description

Bias and Stability Study Menu:
Entering the Gage No in the Gage No(Barcode No) field does not displays the Gage details

Files

bias.png (49.9 KB) bias.png Anonymous, 05/26/2017 03:15 PM

Subtasks 1 (0 open — 1 closed)

Bug #1788: In Bias and Calibration study while entering the Gage No in Gage No (Barcode) it displays the Field even after clearing the Enterd value. On Clicking Error ocurs.Closed06/19/2017

Actions
Actions
Copy link
 #1

Updated by Anonymous about 8 years ago

  • Description updated (diff)
  • Steps To Reproduce updated (diff)
Actions
Copy link
 #2

Updated by User Admin about 8 years ago

  • Status changed from New to Open
Actions
Copy link
 #3

Updated by Anonymous about 8 years ago

  • Status changed from Open to Fixed in Dev
Actions
Copy link
 #4

Updated by Anonymous almost 8 years ago

  • Project changed from EwQIMS SP636 to EwQIMS SP700
  • Status changed from Fixed in Dev to Resolved
  • Build Cycle changed from Cycle 7 to Cycle 0
  • Issue Dependency set to 636
  • Dev Commitment to Resolve in: set to 700
Actions
Copy link
 #5

Updated by Ragavi Ram almost 8 years ago

  • Status changed from Resolved to Closed

Bias and Stability Study Menu-Entering the Gage No in the Gage No(Barcode No) field displays the Gage details in SP700

Actions
Copy link

Also available in: Atom PDF