Bug #1097
closedCalibration History Report:Changing the status is not reflected
0%
1)Login into EWQIMS Application
2)Select MSA Module
3)Go To MSA-Set-Up TAB
4)Click on gages menu
5)Select the TYPE
6)Select the GAGE
7)Perform Study(Change the status as "Inactive")
8)Go To Reports TAB
9)Click on Calibration History menu
10)Select the TYPE
11)Select the gage
12)Observe the Result
Description
When Performing study for the gage and changing the status as "Inactive" will get update in the Gage creation screen .but in the calibration history report the status is not displayed as inactive ,it shows blank data in the status column
Note:when changing the status as Inactive in the gage creation screen ,for calibration history report it is displayed as Inactive for that respective gage
Files
Updated by Anonymous almost 8 years ago
- Subject changed from Calibration History Report:Status to Calibration History Report:Changing the status is not reflected
Updated by Anonymous almost 8 years ago
This page issues are fixed in SSRS report convert.
Updated by User Admin almost 8 years ago
- Status changed from Open to Known Issue
As per Dev team This page issues are fixed in SSRS report convert. So moving this issue in to Known issue list
Updated by Anonymous almost 8 years ago
- Project changed from EwQIMS SP636 to EwQIMS SP700
- Build Cycle changed from Cycle 3 to Cycle 0
- Issue Dependency set to 636
- Dev Commitment to Resolve in: set to NA
Updated by Anonymous almost 8 years ago
- Status changed from Known Issue to In Progress
Updated by Anonymous almost 8 years ago
- Status changed from In Progress to Resolved
Updated by Anonymous almost 8 years ago
- Status changed from Resolved to Fixed in Dev
Updated by Anonymous almost 8 years ago
- Status changed from Fixed in Dev to Resolved